Ship Mechanic Jobs

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Supervisor is responsible for coordinating, supervising, and executing all telecom-related pre-commissioning and commissioning activities for a large industrial energy project. The role ensures that telecom systems are installed, tested, integrated, and commissioned in accordance with project specifications, safety standards, and contractual requirements in preparation for start-up and handover to operations.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning & commissioning execution</strong></p> <ul> <li>Supervise all telecom pre-commissioning and commissioning activities, including system installation checks, functional testing, loop checks, and final integration.</li> <li>Ensure telecom systems are ready for energization, start-up, and operational handover.</li> <li>Coordinate telecom activities with commissioning teams, construction, instrumentation, electrical, and control systems disciplines.</li> <li>Validate readiness of telecom systems including documentation, punch lists, and mechanical completion dossiers.</li> </ul> <p><strong>Telecom systems scope</strong></p> <ul> <li>Supervise and commission a wide range of telecom and communication systems, including but not limited to:</li> <li>Fiber optic networks (FOC, ODF, splicing, OTDR testing)</li> <li>Data and voice communication systems</li> <li>Public Address & General Alarm (PAGA) systems</li> <li>Access control and CCTV systems</li> <li>Radio communication systems (VHF/UHF/TETRA)</li> <li>Telephone and intercom systems</li> <li>Telecom cabinets, racks, and field devices</li> <li>Network switches and servers (where applicable)</li> </ul> <p><strong>Testing & documentation</strong></p> <ul> <li>Review and approve method statements, test procedures, and commissioning check sheets.</li> <li>Execute and witness Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and commissioning tests.</li> <li>Ensure proper recording of test results, red-line drawings, and as-built documentation.</li> <li>Manage punch lists, ensure timely close-out, and support system handover to operations.</li> </ul> <p><strong>Safety & compliance</strong></p> <ul> <li>Enforce strict compliance with HSE rules, permit-to-work systems, and site safety procedures.</li> <li>Conduct toolbox talks and ensure safe execution of all telecom commissioning activities.</li> <li>Ensure telecom installations meet relevant international standards and project specifications.</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise subcontractors, vendors, and technicians involved in telecom commissioning.</li> <li>Coordinate with engineering, construction, QA/QC, and operations teams.</li> <li>Report progress, constraints, and risks to the Commissioning Manager or Discipline Lead.</li> <li>Participate in commissioning meetings, system readiness reviews, and handover sessions.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>Diploma or Bachelor’s Degree in Telecommunications Engineering, Electrical Engineering, Electronics Engineering, or a related discipline.</li> <li>Minimum 8–12 years of experience in telecom systems within oil & gas, LNG, petrochemical, or large industrial projects.</li> <li>At least 3–5 years in a supervisory role focused on pre-commissioning and commissioning activities.</li> <li>Proven experience working on major EPC projects during the commissioning phase.</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Supervisor is responsible for coordinating, supervising, and executing all telecom-related pre-commissioning and commissioning activities for a large industrial energy project. The role ensures that telecom systems are installed, tested, integrated, and commissioned in accordance with project specifications, safety standards, and contractual requirements in preparation for start-up and handover to operations.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning & commissioning execution</strong></p> <ul> <li>Supervise all telecom pre-commissioning and commissioning activities, including system installation checks, functional testing, loop checks, and final integration.</li> <li>Ensure telecom systems are ready for energization, start-up, and operational handover.</li> <li>Coordinate telecom activities with commissioning teams, construction, instrumentation, electrical, and control systems disciplines.</li> <li>Validate readiness of telecom systems including documentation, punch lists, and mechanical completion dossiers.</li> </ul> <p><strong>Telecom systems scope</strong></p> <ul> <li>Supervise and commission a wide range of telecom and communication systems, including but not limited to:</li> <li>Fiber optic networks (FOC, ODF, splicing, OTDR testing)</li> <li>Data and voice communication systems</li> <li>Public Address & General Alarm (PAGA) systems</li> <li>Access control and CCTV systems</li> <li>Radio communication systems (VHF/UHF/TETRA)</li> <li>Telephone and intercom systems</li> <li>Telecom cabinets, racks, and field devices</li> <li>Network switches and servers (where applicable)</li> </ul> <p><strong>Testing & documentation</strong></p> <ul> <li>Review and approve method statements, test procedures, and commissioning check sheets.</li> <li>Execute and witness Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and commissioning tests.</li> <li>Ensure proper recording of test results, red-line drawings, and as-built documentation.</li> <li>Manage punch lists, ensure timely close-out, and support system handover to operations.</li> </ul> <p><strong>Safety & compliance</strong></p> <ul> <li>Enforce strict compliance with HSE rules, permit-to-work systems, and site safety procedures.</li> <li>Conduct toolbox talks and ensure safe execution of all telecom commissioning activities.</li> <li>Ensure telecom installations meet relevant international standards and project specifications.</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise subcontractors, vendors, and technicians involved in telecom commissioning.</li> <li>Coordinate with engineering, construction, QA/QC, and operations teams.</li> <li>Report progress, constraints, and risks to the Commissioning Manager or Discipline Lead.</li> <li>Participate in commissioning meetings, system readiness reviews, and handover sessions.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>Diploma or Bachelor’s Degree in Telecommunications Engineering, Electrical Engineering, Electronics Engineering, or a related discipline.</li> <li>Minimum 8–12 years of experience in telecom systems within oil & gas, LNG, petrochemical, or large industrial projects.</li> <li>At least 3–5 years in a supervisory role focused on pre-commissioning and commissioning activities.</li> <li>Proven experience working on major EPC projects during the commissioning phase.</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><br></p><p><strong>MANAGERIAL RESPONSIBILITIES:</strong></p><ul><li>Create a strategic plan of action for the Rotating Equipment Engineering Services to achieve the goal of zero incidents at the Qalhat LNG Complex for project phase, including adoption of best practices from the industry and budget allocations.</li><li>Build, coach, and performance manage the rotating equipment team; develop succession and capability.</li><li>Manage interfaces with owners, EPC/EPCM, OEMs, utilities/authorities, insurers, and operations/maintenance.</li><li>Provide executive level reporting and decision support.</li><li>Set clear goals and expectations for team members, regularly assess their performance against the set goals, and provide constructive feedback for continuous improvement</li><li>Devote time to train team members on new ways of working, developing new competencies, and upskilling to drive performance and productivity</li></ul><p><strong>FUNCTIONAL RESPONSIBILITIES:</strong></p><p><strong>Projects/Asset Management and Delivery:</strong></p><ul><li>Oversee concept/FEED, detailed design, and interdisciplinary interfaces (civil/structural, mechanical, I&amp;C, telecoms).</li><li>Validate vendor data/OEM integration; ensure operability, maintainability, and reliability targets.</li><li>Design the rotating equipment equipment, rotating equipment distribution and generation system in accordance with HSSE standards, OLNG standards and other regulatory requirements.</li><li>Acts as the subject matter expert (SME) definitive source of knowledge, technique, and expertise within his/her area to provide professional and technical insight for design, engineering and/or complex trouble-shooting activities.</li><li>Mastery Specialist skills on a selected equipment is desirable.</li><li>Skills in load flow system studies, fault level calculations &amp; rotating equipment protection relay grading</li><li>Provide comprehensive support and expertise in technical studies for Rotating Equipment, and all associated components, including proficiency in Process and Instrument Diagram reviews, Safety Integrity Level (SIL) assessments, and HAZOP analyses.</li><li>Well-versed in international codes, standards, and practices for oil and gas EPC projects.</li><li>Oversee troubleshooting for all rotating equipment process incidents that may impact plant reliability and availability, utilising appropriate methodologies such as Root Cause Analysis (RCA) and Tripod as required.</li><li>Ensure complete as built, spares, O&amp;M manuals, training, and warranty plans.</li><li>Achieve performance tests and reliability run per contract, support RAM targets.</li></ul><p><strong>Strategic Planning of Departmental activities:</strong></p><ul><li>Establishes and applies best practices within their area of expertise, leading teams through complex investigations and offering innovative, expert guidance in Rotating Equipment Engineering to effectively address technical issues encountered during maintenance and project execution.</li><li>Define rotating equipment execution strategy, contracting model, and phasing; align with project execution plan (PEP) and governance.</li><li>Establish design basis, standards, and assurance gates for the rotating equipment scope.</li><li>Chair rotating equipment risk reviews, design reviews (rotating equipment), and rotating equipment readiness reviews (MC/Pre Comm/Comm/OR).</li><li>Accountable for ensuring the technical quality of every aspect of Rotating Equipment Engineering projects, including developing and upholding assurance processes across procedures, organizational structure, other business units, staff, and corporate functions to effectively identify, monitor, and manage risks within the relevant business scope.</li><li>Accountable for establishing and sustaining discipline engineering assurance functions, offering advanced specialist technical expertise to support other departments.</li><li>Accountable for developing and implementing the long-term strategic plan for engineering discipline activities within the Asset Reference Plan, ensuring alignment with production, maintenance, and project objectives to achieve effective delivery.</li></ul><p><strong>Stakeholder Management:</strong></p><ul><li>Serve as the primary senior company interface for the client on all rotating equipment matters.</li><li>Manage strategic relationships with joint venture partners, key vendors, and regulatory bodies.</li><li>Experience to manage CONTRACTORS &amp; Project deliverables for owner is distinctly preferred.</li><li>Negotiate settlement of major claims and variations related to rotating equipment scope.</li><li>Builds and sustains productive partnerships with a diverse range of stakeholders such as area maintenance managers, turnaround managers, project managers, and senior leadership.</li><li>This position requires dynamic involvement in several workgroups simultaneously, ensuring information is shared effectively throughout the organization.</li><li>Foster technical innovation and ongoing improvement by seeking new developments, deploying opportunities, and engaging with leadership in line with OLNG s core values and policies.</li><li>Accountable for fostering and sustaining organisational alignment to achieve business objectives within the relevant discipline, while ensuring overall consistency with corporate goals.</li></ul><p><strong>Management of Engineering Contracts:</strong></p><ul><li>Establish technical requisition requirements and evaluation criteria; provide leadership in Technical Bid Evaluation (TBE) and vendor selection for Rotating Equipment.</li><li>Manage rotating equipment change orders, claims avoidance/defence, and commercial exposure for rotating equipment packages.</li><li>Initiate new contracts for Major Rotating Equipment Maintenance &amp; Projects and carry out technical evaluation.</li><li>Responsible for planning major engineering contracts from the beginning, including developing contract strategies, evaluating and choosing contractors.</li><li>Also ensures that significant contracts are delivered on time, within budget, and in compliance with safety, quality, and contractual requirements.</li></ul><p><strong>Quality Assurance:</strong></p><ul><li>Drive zero harm culture; ensure compliance with rotating equipment safety standards (e.g. DEP, where applicable).</li><li>Ensure design and construction adhere to applicable codes, environmental and regulatory permits.</li><li>Own rotating equipment QA/QC plan, ITPs, and non conformance management.</li><li>Accountable that all the rotating equipment discipline procedures within an ISO certified quality assurance system.</li><li>Accountable in setting the requirement of regular rotating equipment spare parts.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>BSc in Mechanical Engineering or Equivalent. Minimum of 12 years relevant oil and gas industry experience with 8 10+ years in large industrial/ O&amp;G projects with LNG experience 5+ years in leadership of multi disciplinary rotating equipment teams; track record of first time right energization. Technical Authority Level 2 (TA-2) Minimum 4+ years of experience in troubleshooting, analysis of Rotating Equipment Technical Authority Level3 Demonstrated experience in the execution, engineering, construction, commissioning, or management of major industrial projects, preferably within the Oil &amp; Gas, LNG, or energy sector</p>

<p>As a Senior Site Engineer - Mechanical, you will be responsible for collaborating with project managers ensuring that all Mechanical installations and construction activities on Closed/Open Cycle Gas Turbine Projects and meet industry standards, project specifications, and regulatory requirements. You will conduct inspections, tests, and audits to verify that the construction and installation processes are executed correctly and safely. collaborating with project managers to develop project plans and schedules, ensuring that milestones are met on time and within budget, and monitoring and reporting project progress to senior management.</p><p>Project Management: Collaborate with project managers to develop mechanical project plans and schedules. Ensure the timely completion of mechanical project milestones within the allocated budget. Regularly report on project progress to senior management.</p><p>Mechanical System Design: Review and interpret mechanical engineering drawings and specifications. Provide valuable input into the design phase to optimize mechanical systems. Ensure strict compliance with local mechanical codes and regulations.</p><p>Installation and Maintenance: Supervise the on-site installation of mechanical systems and equipment. Conduct systematic inspections to ensure the quality and safety of mechanical installations. Oversee preventive and corrective maintenance activities.</p><p>Team Leadership: Lead and motivate a team of mechanical technicians and support staff. Offer guidance, training, and mentorship to junior team members. Cultivate a culture of safety and professionalism within the team.</p><p>Quality Assurance: Establish and maintain robust quality control procedures for mechanical work. Perform meticulous quality inspections to identify and rectify issues promptly.</p><p>Safety and Compliance: Guarantee that all mechanical work adheres to safety regulations and industry best practices. Investigate and report any safety incidents or near misses.</p><p>Budget Management: Efficiently manage the mechanical project budget, including cost estimation and control. Identify opportunities for cost savings without compromising quality. Budget Management: Efficiently manage the mechanical project budget, including cost estimation and control. Identify opportunities for cost savings without compromising quality.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in mechanical engineering or a closely related field. Minimum of 10 years of mechanical engineering experience, with a focus on power generation projects. Experience with Closed/Open Cycle Gas Turbine Projects and Sub station Projects Profound knowledge of mechanical systems, codes, and standards. Demonstrated expertise in project management and team leadership.</p>

<p><b>Job purpose</b></p><p><br></p><p>Provides reliable, and cost-effective Mechanical Statics&nbsp; Engineering solutions / packages at RPI MAF assets, under TL Engineering Services MAF (TSD) scope, acting as interface between MAF engineering and Mechanical (Statics)&nbsp; Discipline TSD, and exclusive focal point to support to MAF Assets in relevant Mechanical (Statics)&nbsp; equipment related to its assets (including its Pumps, control valves, Compressors, Bulk Handling Equipment, etc.) by:&nbsp; (1) Develop engineering packages / solutions at MAF for MOCs, Projects, resolution of Bad actors, reliability improvement initiative etc. related with Mechanical (Statics)&nbsp; discipline,&nbsp; (2) Execute Tests, and measures specific parameters related with Mechanical (Statics)&nbsp; discipline for MAF Assets, (3) Conduct inspections for Mechanical (Statics)&nbsp; materials before be installed at MAF sites, (4) Implement the continuous improvements philosophy for Mechanical (Statics)&nbsp; equipment / services, tasks, related with MAF Assets, (5) Support the TL and Lead Engineer MAF in implementing key Mechanical (Statics)&nbsp; Engineering initiatives to maximize plant availability, without compromising functional safety, and (6)&nbsp; Liaise with Mechanical (Statics)&nbsp; discipline path TSD team for alignment in related practices and functional processes; in order to&nbsp; ensure that MAF meets the approved Mechanical (Statics)&nbsp; engineering design criteria, applicable code &amp; standards, ODES (OQ Design Engineering Specifications) and complies with MAF strategy, Mechanical (Statics)&nbsp; path Strategy, and whole TSD functional requirements for materials / equipment for a particular project(s) &amp;&nbsp; related specification(s) at RPI.</p><p><br></p><p>&nbsp;</p><p><br></p><p>The position will act in accordance with the Group’s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani’s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Desired Candidate Profile</strong></p><p>8-10 years of relevant experience </p><p>Ideal candidate should come from TSD Mechanical (Statics) path team, as Engineer Mechanical (Statics) , with records of supporting several RPI Assets including MAF in reliability principles and Mechanical (Statics) action. </p><p>Experience reading/understanding P&amp;IDs and engineering documentation. </p><p>Well versed on the latest International Code &amp; Standards related to Mechanical (Statics) Engineering </p><p>Experience in reviewing, executing Engineering Software like STAAD /AutoCAD for Mechanical (Statics) Engineer </p><p>Experience in handling FEED/EPC Contracts </p><p>Experience and well versed in field investigation, inspections, troubleshooting, performance checks, data compilation, etc. </p><p>Familiar with techniques for ensuring data integrity with various integration of information/ reports. </p><p>Experience handling HSE (Permit to Work PTW, Process Safety, H2S Awareness, Basic Fire Fighting, Emergency Response) </p><p>Understanding of Process Plant (P&amp; ID / PFD) &amp; Engineering drawings and OEM manuals. </p><p><br></p>

<p><strong>JOB DESCRIPTION</strong></p><p><strong>BASIC INFORMATION</strong></p><ul><li>Position Name: Mechanical Technician</li><li>Function: Operations &amp; Maintenance</li><li>Job Code: </li><li>Department: Plant</li><li>Section: Maintenance</li><li>Location: Plant</li><li>Reporting To (Functional Title): Mechanical Maintenance Lead</li><li>Number of Direct Reports: N/A</li></ul><p><strong>ROLE PURPOSE</strong></p><p>is responsible for carrying out preventive, predictive, and corrective maintenance activities on mechanical equipment within the power and water plant. The role ensures the reliability, availability, efficiency, and safe operation of generating units, desalination systems, auxiliary equipment, and balance-of-plant assets.</p><p><strong>ACCOUNTABILITIES AND RESPONSIBILITIES</strong></p><ul><li>Troubleshooting Faulty Machinery: Stay aware of anything unusual, troubleshoot faulty machinery and diagnose the root cause of the malfunction using diagnostic tools and problem-solving abilities.</li><li>Mechanical Preventive and Corrective maintenance: performing preventive, predictive, and corrective maintenance on mechanical equipment to ensure the safe, reliable, and efficient operation of the power and water plant. This includes inspecting, troubleshooting, repairing, and overhauling rotating and static equipment such as pumps, compressors, valves, fans, heat exchangers, gearboxes, and associated auxiliary systems.</li><li>Contractor Management: Coordinate and supervise contractor personnel performing mechanical maintenance activities within the plant. Inspect completed contractor work to verify compliance with technical specifications, maintenance standards, and plant requirements.</li><li>Collaboration on Complex Mechanical Issues: Ensure maintenance procedures reflect current best practices, OEM recommendations, safety requirements, and plant operational needs.</li><li>SOP &amp; Manual Update and Development: Support the development, review, and periodic update of Standard Operating Procedures (SOPs), maintenance procedures, and equipment manuals for mechanical systems and equipment. Ensure SOPs and maintenance documentation are aligned with OEM recommendations, industry best practices, plant requirements, and HSE standards.</li><li>Document Maintenance and Repairs Daily Log: Complete work orders and maintenance records accurately using SAP, Maximo, or other CMMS systems. Prepare maintenance reports and equipment history records. Update equipment inspection checklists and maintenance logs.</li><li>Coaching New Hires: Coach newly hired/Junior Mechanical Technicians and teach them various policies, procedures, and repair techniques.</li><li>Safety Compliance: Comply with all plant safety procedures, permit-to-work systems, and lockout/tagout (LOTO) requirements. Ensure proper use of Personal Protective Equipment (PPE). Participate in toolbox talks, safety meetings, and risk assessments. Report hazards, near misses, and incidents promptly.</li><li>Technical Skills: Mechanical troubleshooting and fault diagnosis. Pump and compressor maintenance. Turbine auxiliary systems maintenance. Mechanical seal and bearing replacement. Shaft alignment using laser alignment tools. Reading and interpreting P&amp;IDs, engineering drawings, and manuals. Hydraulic and pneumatic systems maintenance. Knowledge of condition monitoring techniques. Familiarity with SAP PM, Maximo, or similar maintenance systems.</li><li>Health, Safety &amp; Quality: Comply with all relevant health, safety and quality requirements, to guarantee employee safety and legislative compliance.</li><li>Continuous Improvement: Participate in continuous improvement initiatives to enhance equipment reliability, plant availability, and maintenance efficiency. Share technical knowledge and lessons learned with team members to promote continuous learning and development.</li></ul><p><strong>COMMUNICATION CHANNELS</strong></p><ul><li>Internal: Mechanical Maintenance Lead, Maintenance Team, Operations Team</li><li>External: Contractors, Suppliers</li></ul><p><strong>ROLE REQUIREMENTS</strong></p><p><strong>Educational &amp; Professional Qualifications and Experience</strong></p><ul><li>Minimum Qualifications: Diploma in Mechanical Engineer from a technical or vocational college</li><li>Proficiency in English is a must, Arabic is a plus</li><li>Minimum Experience: 3 to 6 years of direct and relevant experience in power generation, desalination, water treatment, utilities</li><li>Skills and Competencies: Generic Skills: Communication skills, Computer literacy (ERP), Microsoft tool (Excel, PowerPoint, Word)</li><li>Job Specific Skills: Mechanical skills, Troubleshooting skills, Detail-Orientation, Problem-Solving skills, Teamwork, Knowledge in OSHA standards</li><li>Behavioural Competencies: People Centricity, Integrity, Agility, Collaboration</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in Mechanical Engineer from a technical or vocational college</li><li>Proficiency in English is a must, Arabic is a plus</li><li>3 to 6 years of direct and relevant experience in power generation, desalination, water treatment, utilities</li><li>Generic Skills: Communication skills, Computer literacy (ERP), Microsoft tool (Excel, PowerPoint, Word)</li><li>Job Specific Skills: Mechanical skills, Troubleshooting skills, Detail-Orientation, Problem-Solving skills, Teamwork, Knowledge in OSHA standards</li><li>Behavioural Competencies: People Centricity, Integrity, Agility, Collaboration</li></ul>

<p>The incumbent will be responsible for mechanical operation, inspection, maintenance, troubleshooting, and breakdown handling of cooling bed, bundling, counting, strapping, and material handling equipment in a TMT Rolling Mill. Ensure reliable equipment performance, minimum downtime, and smooth movement and bundling of finished bars.</p><p>Key Responsibilities:</p><ul><li>Operate, inspect, and monitor cooling bed and bundling mechanical equipment for smooth and reliable operation.</li><li>Ensure proper functioning of cooling bed, rake/transfer systems, roller tables, conveyors, bundle forming, and discharge mechanisms .</li><li>Monitor and maintain proper bar alignment, separation, stacking, transfer, and discharge .</li><li>Inspect and maintain bearings, rollers, shafts, chains, sprockets, couplings, gearboxes, cylinders, and mechanical drives .</li><li>Carry out routine checks of hydraulic, pneumatic, lubrication, and mechanical systems .</li><li>Identify and troubleshoot mechanical abnormalities such as vibration, noise, overheating, leakage, misalignment, and component wear .</li><li>Perform preventive maintenance, breakdown maintenance, lubrication, adjustment, alignment, and replacement of mechanical components.</li><li>Attend breakdowns in the cooling bed and bundling section to minimize equipment downtime and production losses .</li><li>Support maintenance activities during mill start-up, shutdowns, product changeovers, and planned maintenance .</li><li>Coordinate with Production, Electrical, Instrumentation, and Operations teams for effective troubleshooting and maintenance.</li><li>Ensure availability and proper condition of spares, tools, and critical mechanical components .</li><li>Maintain proper maintenance records, inspection reports, and breakdown reports .</li><li>Follow LOTO, safety procedures, housekeeping, and 5S requirements in the maintenance area.</li></ul>Required Skills &amp; Knowledge:<ul><li>Knowledge of rolling mill finishing operations, cooling bed systems, and bundling processes.</li><li>Experience in handling TMT Rebar or Wire Rod products.</li><li>Familiarity with bundle counting, tagging, weighing, and dispatch procedures.</li><li>Understanding of quality requirements for finished steel products.</li><li>Ability to operate hydraulic, pneumatic, and mechanical equipment used in the finishing section.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Experience : 6+ Years Qualification: ITI (Full Time) Department: Rolling Mill Mechanical</p>

<p>The role is responsible for carrying out preventive, predictive, and corrective maintenance activities on mechanical equipment within the power and water plant. The role ensures the reliability, availability, efficiency, and safe operation of generating units, desalination systems, auxiliary equipment, and balance-of-plant assets.</p><p><strong>ACCOUNTABILITIES AND RESPONSIBILITIES</strong></p><p>1- Troubleshooting Faulty Machinery</p><p>Stay aware of anything unusual, troubleshoot faulty machinery and diagnose the root cause of the malfunction using diagnostic tools and problem-solving abilities.</p><p>2- Mechanical Preventive and Corrective maintenance</p><p>Performing preventive, predictive, and corrective maintenance on mechanical equipment to ensure the safe, reliable, and efficient operation of the power and water plant. This includes inspecting, troubleshooting, repairing, and overhauling rotating and static equipment such as pumps, compressors, valves, fans, heat exchangers, gearboxes, and associated auxiliary systems.</p><p>3-Contractor Management</p><p>Coordinate and supervise contractor personnel performing mechanical maintenance activities within the plant. Inspect completed contractor work to verify compliance with technical specifications, maintenance standards, and plant requirements</p><p>4- Collaboration on Complex Mechanical Issues</p><p>Ensure maintenance procedures reflect current best practices, OEM recommendations, safety requirements, and plant operational needs.</p><p>5-SOP &amp; Manual Update and Development</p><p>Support the development, review, and periodic update of Standard Operating Procedures (SOPs), maintenance procedures, and equipment manuals for mechanical systems and equipment. Ensure SOPs and maintenance documentation are aligned with OEM recommendations, industry best practices, plant requirements, and HSE standards.</p><p>6-Document Maintenance and Repairs Daily Log</p><p>Complete work orders and maintenance records accurately using SAP, Maximo, or other CMMS systems. Prepare maintenance reports and equipment history records. Update equipment inspection checklists and maintenance logs.</p><p>7- Coaching New Hires</p><p>Coach newly hired/Junior Mechanical Technicians and teach them various policies, procedures, and repair techniques.</p><p>8- Safety Compliance</p><p>Comply with all plant safety procedures, permit-to-work systems, and lockout/tagout (LOTO) requirements. Ensure proper use of Personal Protective Equipment (PPE). Participate in toolbox talks, safety meetings, and risk assessments. Report hazards, near misses, and incidents promptly.</p><p>9-Technical Skills</p><p>Mechanical troubleshooting and fault diagnosis. Pump and compressor maintenance. Turbine auxiliary systems maintenance. Mechanical seal and bearing replacement. Shaft alignment using laser alignment tools. Reading and interpreting P&amp;IDs, engineering drawings, and manuals. Hydraulic and pneumatic systems maintenance. Knowledge of condition monitoring techniques. Familiarity with SAP PM, Maximo, or similar maintenance systems.</p><p>10-Health, Safety &amp; Quality</p><p>Comply with all relevant health, safety and quality requirements, to guarantee employee safety and legislative compliance.</p><p>11- Continuous Improvement</p><p>Participate in continuous improvement initiatives to enhance equipment reliability, plant availability, and maintenance efficiency. Share technical knowledge and lessons learned with team members to promote continuous learning and development.</p><p><strong>COMMUNICATION CHANNELS</strong></p><p>Internal Mechanical Maintenance Lead Maintenance Team Operations Team External Contractors Suppliers</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in Mechanical Engineer from a technical or vocational college.</li><li>Proficiency in English is a must, Arabic is a plus.</li><li>3 to 6 years of direct and relevant experience in power generation, desalination, water treatment, utilities.</li><li>Communication skills, Computer literacy (ERP), Microsoft tool (Excel, PowerPoint, Word).</li><li>Mechanical skills, Troubleshooting skills, Detail-Orientation, Problem-Solving skills, Teamwork, Knowledge in OSHA standards.</li><li>People Centricity, Integrity, Agility, Collaboration.</li></ul>

<p>ROLE PURPOSE is responsible for carrying out preventive, predictive, and corrective maintenance activities on mechanical equipment within the power and water plant. The role ensures the reliability, availability, efficiency, and safe operation of generating units, desalination systems, auxiliary equipment, and balance-of-plant assets. ACCOUNTABILITIES AND RESPONSIBILITIES 1- Troubleshooting Faulty Machinery Stay aware of anything unusual, troubleshoot faulty machinery and diagnose the root cause of the malfunction using diagnostic tools and problem-solving abilities. 2- Mechanical Preventive and Corrective maintenance Performing preventive, predictive, and corrective maintenance on mechanical equipment to ensure the safe, reliable, and efficient operation of the power and water plant. This includes inspecting, troubleshooting, repairing, and overhauling rotating and static equipment such as pumps, compressors, valves, fans, heat exchangers, gearboxes, and associated auxiliary systems. 3-Contractor Management Coordinate and supervise contractor personnel performing mechanical maintenance activities within the plant. Inspect completed contractor work to verify compliance with technical specifications, maintenance standards, and plant requirements 4- Collaboration on Complex Mechanical Issues Ensure maintenance procedures reflect current best practices, OEM recommendations, safety requirements, and plant operational needs. 5-SOP &amp; Manual Update and Development Support the development, review, and periodic update of Standard Operating Procedures (SOPs), maintenance procedures, and equipment manuals for mechanical systems and equipment. Ensure SOPs and maintenance documentation are aligned with OEM recommendations, industry best practices, plant requirements, and HSE standards. 6-Document Maintenance and Repairs Daily Log Complete work orders and maintenance records accurately using SAP, Maximo, or other CMMS systems. Prepare maintenance reports and equipment history records. Update equipment inspection checklists and maintenance logs. 7- Coaching New Hires Coach newly hired/Junior Mechanical Technicians and teach them various policies, procedures, and repair techniques. 8- Safety Compliance Comply with all plant safety procedures, permit-to-work systems, and lockout/tagout (LOTO) requirements. Ensure proper use of Personal Protective Equipment (PPE). Participate in toolbox talks, safety meetings, and risk assessments. Report hazards, near misses, and incidents promptly. 9-Technical Skills Mechanical troubleshooting and fault diagnosis. Pump and compressor maintenance. Turbine auxiliary systems maintenance. Mechanical seal and bearing replacement. Shaft alignment using laser alignment tools. Reading and interpreting P&amp;IDs, engineering drawings, and manuals. Hydraulic and pneumatic systems maintenance. Knowledge of condition monitoring techniques. Familiarity with SAP PM, Maximo, or similar maintenance systems. 10-Health, Safety &amp; Quality Comply with all relevant health, safety and quality requirements, to guarantee employee safety and legislative compliance. 11- Continuous Improvement Participate in continuous improvement initiatives to enhance equipment reliability, plant availability, and maintenance efficiency. Share technical knowledge and lessons learned with team members to promote continuous learning and development. COMMUNICATION CHANNELS Internal Mechanical Maintenance Lead Maintenance Team Operations Team External Contractors Suppliers</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Qualifications: Diploma in Mechanical Engineer from a technical or vocational college. Proficiency in English is a must, Arabic is a plus. Minimum Experience: 3 to 6 years of direct and relevant experience in power generation, desalination, water treatment, utilities. Skills and Competencies Generic Skills: Communication skills, Computer literacy (ERP), Microsoft tool (Excel, PowerPoint, Word). Job Specific Skills: Mechanical skills, Troubleshooting skills, Detail-Orientation, Problem-Solving skills, Teamwork, Knowledge in OSHA standards. Behavioral Competencies: People Centricity, Integrity, Agility, Collaboration. *Only candidates selected to advance to the next stages of the assessment will be contacted*</p>

<p><strong>Key Responsibilities</strong></p><ul><li><p>Perform preventive and corrective maintenance on forklifts and material-handling equipment.</p></li><li><p>Diagnose and repair mechanical, hydraulic, electrical, and electronic faults in Forklifts.</p></li><li><p>Conduct routine inspections and identify safety-critical defects.</p></li><li><p>Troubleshoot forklift breakdowns and restore equipment to safe operating condition with minimum downtime.</p></li><li><p>Maintain and repair mast, lifting, steering, braking, transmission, drive, hydraulic, and electrical systems.</p></li><li><p>Carry out battery, charging-system, engine, fuel, and cooling-system maintenance as applicable to the equipment type.</p></li><li><p>Use diagnostic tools, test equipment, service manuals, and technical schematics to identify faults.</p></li><li><p>Perform functional and safety checks after completing repairs.</p></li><li><p>Maintain accurate records of inspections, repairs, spare parts, and preventive maintenance activities.</p></li><li><p>Follow all company HSE, maintenance, and equipment safety procedures.</p></li></ul><p><strong>Essential Qualifications & Experience</strong></p><ul><li><p>Technical diploma/certificate in Mechanical, Automotive, Electrical, Heavy Equipment, or a related technical field.</p></li><li><p>Minimum <strong>3–5 years of relevant experience</strong> as a Forklift Technician, Material Handling Equipment Technician, Heavy Equipment Technician, or similar role.</p></li><li><p>Hands-on experience with <strong>electric and/or internal-combustion forklifts</strong>.</p></li><li><p>Strong knowledge of <strong>mechanical, hydraulic, electrical, and electronic systems</strong>.</p></li><li><p>Proven ability to diagnose faults and perform repairs independently.</p></li><li><p>Ability to read and understand <strong>hydraulic and electrical schematics</strong>.</p></li><li><p>Experience using mechanical, electrical, hydraulic, and diagnostic tools.</p></li><li><p>Good knowledge of preventive maintenance practices.</p></li><li><p>Strong understanding of equipment safety and safe maintenance procedures.</p></li><li><p>Experience with major forklift brands/OEM equipment is an advantage.</p></li></ul><p><strong>Key Competencies</strong></p><ul><li><p>Strong troubleshooting and problem-solving skills.</p></li><li><p>Good mechanical and technical aptitude.</p></li><li><p>Safety-focused approach to all maintenance activities.</p></li><li><p>Ability to work independently and as part of a maintenance team.</p></li><li><p>Good attention to detail and quality of workmanship.</p></li><li><p>Ability to work under pressure and respond to equipment breakdowns.</p></li><li><p>Good communication and reporting skills.</p></li><li><p>Reliable, disciplined, and service-oriented.</p></li><li><p>Willingness to work shifts, overtime, or emergency breakdown support when required.</p></li></ul><p><strong>Preferred / Advantageous</strong></p><ul><li><p>OEM/manufacturer training or certification in forklift maintenance.</p></li><li><p>Experience with Toyota, Hyster-Yale, Linde, Jungheinrich, Mitsubishi, Crown, CAT, Komatsu, or other major forklift brands.</p></li><li><p>Experience with modern electric forklifts, electronic control systems, and diagnostic software.</p></li><li><p>Previous experience in warehouse, logistics, manufacturing, port, or industrial environments.</p></li><li><p>Valid driving license, where applicable.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><p>A hands-on, safety-focused Forklift Technician with 3–5 years of practical experience, strong mechanical/hydraulic/electrical troubleshooting skills, and proven ability to independently maintain, diagnose, and repair electric and/or IC forklifts while minimizing equipment downtime.</p>

<p>Sheet Mechanical Technician – Extrusion Line position,</p><br><br><p>Key Responsibilities</p><ul><li><p>Troubleshoot mechanical problems in sheet extrusion and winder machines.</p></li><li><p>Inspect and troubleshoot hydraulic circuits, including safety checks, routine faults, and corrective actions.</p></li><li><p>Troubleshoot and maintain dryers, vacuum systems, and auxiliary equipment, including:</p><ul><li><p>Air compressors</p></li><li><p>Air cooled chillers</p></li><li><p>Wrapping machines</p></li><li><p>Basic AHU</p></li></ul></li><li><p>Perform routine equipment maintenance and carry out preventive and corrective maintenance.</p></li><li><p>Identify common mechanical faults and perform effective troubleshooting and repairs.</p></li><li><p>Read, interpret, and understand mechanical drawings and equipment documentation.</p></li></ul><br><p>Computer & Technical Skills</p><ul><li><p>Basic computer knowledge is required.</p></li><li><p>Working knowledge of Microsoft Office, including:</p><ul><li><p>MS Word</p></li><li><p>MS Excel</p></li><li><p>MS PowerPoint</p></li></ul></li><li><p>SAP experience is highly preferred, particularly for maintenance-related activities such as work orders, and maintenance records.</p></li></ul><br><p>Minimum Requirements</p><ul><li><p>Minimum 4 years of hands-on experience with extrusion lines, preferably in sheet extrusion.</p></li><li><p>Experience with SML Austria and EREMA extrusion machines is highly preferred.</p></li><li><p>Minimum Diploma in Mechanical Engineering or an equivalent technical qualification.</p></li></ul><br><p>Language Skills</p><ul><li><p>English language proficiency is required, (written and spoken English).</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>A technician who has worked directly on SML/EREMA sheet extrusion equipment and has strong hands-on experience in mechanical troubleshooting, hydraulics, preventive maintenance, and extrusion-line auxiliary systems.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job description</b></p><p>Require Procurement Engineer for Group of Company. Candidates must require experience in Oils and Gas Procurement . Mechanical Degree is require for Procurement.</p><p>Role: Procurement / Purchase Engineer</p><p>Industry Type: Engineering &amp; Construction</p><p>Department: Procurement &amp; Supply Chain</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Procurement &amp; Purchase</p><p><b>Education</b></p><p>UG: B.Tech / B.E. in Any Specialization</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must require experience in Oils and Gas Procurement .</li><li>Mechanical Degree is require for Procurement.</li></ul><p></p></section>

<p>URGENT HIRING FOR QA QC ENGINEER (Mechanical)</p><p>Industry: Oil &amp; Gas / Refinery / Pipeline</p><p>Location: GCC / Middle East</p><p>Position: QC Engineer Mechanical</p><p>Experience: Minimum 15 Years</p><p>We are looking for an experienced QC Engineer Mechanical with extensive experience in pipeline, piping, tanks, pressure equipment, valves, rotating equipment, and refinery construction projects .</p><p>Qualification &amp; Certifications</p><ul><li>HNC / HND / Bachelor's Degree or equivalent in Mechanical Engineering, Welding Engineering, Metallurgy , or relevant technical qualification</li><li>CSWIP 3.1 / AWS or equivalent certification</li><li>ASNT / EN 473 / PCN Level II certification in RT, PT, MT &amp; UT techniques</li><li>Strong knowledge of mechanical and metallurgical testing requirements</li></ul><p>Experience Required</p><ul><li>Minimum 15 years of relevant inspection/QC experience for HNC/HND candidates</li><li>Extensive experience in Oil &amp; Gas, Pipeline, Piping, Tanks, Pressure Equipment, Valves, Rotating Equipment, and Refinery Construction</li><li>Strong knowledge of welding, NDT, mechanical inspection, testing, and quality documentation</li><li>Experience working with approved ITPs, procedures, method statements, and project quality requirements</li></ul><p>Key Responsibilities</p><ul><li>Implement QA/QC activities , including inspection and surveillance of subcontractors and suppliers, in accordance with approved ITPs, procedures, method statements, and quality control documents.</li><li>Prepare, review, and sign off applicable inspection, testing, and quality surveillance records .</li><li>Conduct surveillance inspections to ensure compliance with approved processes and procedures.</li><li>Monitor construction activities and ensure required quality standards are maintained.</li><li>Raise RFIs (Request for Inspection) to the client for day-to-day construction activities.</li><li>Witness pigging, hydrostatic testing, pneumatic testing , and other applicable inspection and testing activities.</li><li>Conduct line walks and prepare, monitor, and close punch lists.</li><li>Witness and verify PQR/WQT activities in accordance with approved PWPS/WPS .</li><li>Verify that all materials are procured from approved suppliers and comply with project specifications.</li><li>Monitor and ensure timely closure of NCRs , including suitable correction and corrective actions.</li><li>Maintain records related to calibration, inspection, and testing equipment .</li><li>Ensure the latest approved versions of applicable drawings, specifications, procedures, and quality documents are available at site.</li><li>Witness qualification procedures and tests and certify the results as applicable.</li><li>Issue Inspection Release Notes (IRN) and sign test packs / QC dossiers as required.</li><li>Coordinate with clients, third-party inspectors, subcontractors, and construction teams on quality-related matters.</li><li>Provide regular feedback to the Site Quality Engineer / Quality Manager regarding day-to-day quality issues and concerns.</li></ul><p>Required Skills</p><ul><li>Strong knowledge of QA/QC procedures and inspection practices</li><li>Good understanding of NDT techniques and welding inspection</li><li>Knowledge of quality audits and quality management systems</li><li>Strong knowledge of MS Office</li><li>Excellent written and verbal communication skills in English</li><li>Strong reporting, documentation, coordination, and problem-solving abilities</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>HNC / HND / Bachelor's Degree or equivalent in Mechanical Engineering, Welding Engineering, Metallurgy , or relevant technical qualification</li><li>CSWIP 3.1 / AWS or equivalent certification</li><li>ASNT / EN 473 / PCN Level II certification in RT, PT, MT &amp; UT techniques</li><li>Strong knowledge of mechanical and metallurgical testing requirements</li><li>Minimum 15 years of relevant inspection/QC experience for HNC/HND candidates</li><li>Extensive experience in Oil &amp; Gas, Pipeline, Piping, Tanks, Pressure Equipment, Valves, Rotating Equipment, and Refinery Construction</li><li>Strong knowledge of welding, NDT, mechanical inspection, testing, and quality documentation</li><li>Experience working with approved ITPs, procedures, method statements, and project quality requirements</li><li>Strong knowledge of QA/QC procedures and inspection practices</li><li>Good understanding of NDT techniques and welding inspection</li><li>Knowledge of quality audits and quality management systems</li><li>Strong knowledge of MS Office</li><li>Excellent written and verbal communication skills in English</li><li>Strong reporting, documentation, coordination, and problem-solving abilities</li></ul>

<p>JOB PURPOSE: To perform various tasks pertaining to effective planning of vessel discharge &amp; load operations, yard layouts &amp; operations for Imports, MTs, Exports and Transshipment with due segregation as per department policies and procedures. The planning considers vessel stability, cargo safety &amp; security, an efficient yard and vessel operation. Close real-time monitoring of vessel, berth, yard and gate operations to ensure that vessel, cargo / containers have confirmed positions at any point of time to reduce shifting and unproductive moves either while loading or unloading. KEY RESPONSIBILITIES: In liaison with JPO Team Lead, provides the vessel, yard, gate and berth planning &amp; administration: For all types of cargo operations Dry Bulk, Containers, Multi-purpose, RORO, Liquid Bulk. Ensure each shipment is handled in the correct way, this will include freight, weight measurement determination and calculation, requesting adequate equipment &amp; manpower are in the right place at the right time. Responsible for planning the activities based on discharge / load documentation such as Stowage Plans, Bills of Lading, Cargo / Vessel Manifests, Load List, Booking, Release Requests, IMDG declarations, Special Requests for services and others. Digitize these documents by uploading in JMT. Prepare generate and communicate vessel load/discharge plans and vessel work plans in JMT as applicable to the relevant department / Vessel Agents. Real-time monitoring of vessel / yard / gate / berth cargo operations to improve terminal productivity. Cargo Accounting - Reconciliation of import, export and storage cargoes. Manage all customer electronic or manual documentation Booking, Pre-Note, Release Requests Import / Export, Cargo Manifests in preformatted form. Responsible to plan the effective utilization of Berth, Yard, Gate and other port facilities. Based on inputs from the Vessel Agent for the voyages, keep the JMT / Planning Board always updated with all relevant data for each voyage / cargo. Responsible to organize &amp; minute- Pre-Ops / Toolbox meetings. Manage Draft Survey and reporting proactively. Reports problems and issues especially the issues of complexity or impact on the operations. Maintain yard inventory to track the movement of cargo and Gate Opening / Closing for export cargo as per rules and yard setups to maximize productivity, capacity and efficiency. Responsible for planning the gate movements and schedule truck appointments. Report on a regular basis on the status of berth, yard density, equipment utilization and strategy/allocation changes. Prepare daily yard work plans related to discharges, receiving exports, housekeeping etc. Responsible for data quality of all vessel / cargo related information especially review the data quality of tally sheets from various points and the cargo transactions in JMT. Contribute to continuous process improvement of workflows of the department. Responsible for quality checks and controls of all invoices before processing by Commercial team. HSE Responsibilities: Ensure that all HSE instructions are fully understood and complied with. Must demonstrate total commitment to the company safety policies through participation and proactive involvement. Reporting HSE incident, near misses and violation to immediate supervisor. Responsible to participate in safety meetings and safety drills held on board and ensures operations abide by established/HSE operating procedures and practices and equipment is used within predetermined capacities. QUALIFICATION, EXPERIENCE AND SKILLS: Education: Diploma preferably in Port and Ship Management or as per the Minimum Qualifications and Experiences matrix in Ports. Experience : Minimum of 3 years of experience in Planning of cargo / containers, preferably multi-purpose port or terminal. Skills &amp; Knowledge: Understanding of Shipping and Port Industry. Excellent communication skills and negotiating skills. Focus on details and high accuracy. Ability to work safely in adverse weather conditions. Good Presentation skills to present information in a one-on-one and small group. Good Communication skills and aptitude to create effective teams. Good Problem-Solving Skills; Good Team Management Skills. Computer literacy including MS Office. The ability to write reports and keep records. Good planning &amp; administrative skills. Needs to be in good physical condition (full body check to be performed + check height phobia + Colour Blindness). Obtain cooperation and assistance to meet objectives within a multi-cultural environment. Extensive and hands-on understanding of modern terminal operations including computer terminal management systems. Extensive and in depth understanding of vessel and yard planning. Strong communication skills with the ability to communicate with team and customers. Extensive knowledge of operational practices. Fluent in English, both written and spoken. Dynamic, rigorous, and strong tolerance for the elements. Ability to work in shifts and long hours. Solid understanding of the shipping industry in general and Port &amp; Terminals in specific. KEY INTERACTIONS: Internally : Commercial. Operation. HSSE. Harbour &amp; Marine. Externally : All customers, including Shipping Lines, Vessel Agents, consignees, shippers, and other logistic support service providers (both existing and potential). ROP / Customs / Immigration / Health &amp; Quarantine and related government bodies etc.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: Diploma preferably in Port and Ship Management or as per the Minimum Qualifications and Experiences matrix in Ports.</p><p>Experience : Minimum of 3 years of experience in Planning of cargo / containers, preferably multi-purpose port or terminal.</p><p>Skills &amp; Knowledge:</p><ul><li>Understanding of Shipping and Port Industry.</li><li>Excellent communication skills and negotiating skills.</li><li>Focus on details and high accuracy.</li><li>Ability to work safely in adverse weather conditions.</li><li>Good Presentation skills to present information in a one-on-one and small group.</li><li>Good Communication skills and aptitude to create effective teams.</li><li>Good Problem-Solving Skills; Good Team Management Skills.</li><li>Computer literacy including MS Office.</li><li>The ability to write reports and keep records.</li><li>Good planning &amp; administrative skills.</li><li>Needs to be in good physical condition (full body check to be performed + check height phobia + Colour Blindness).</li><li>Obtain cooperation and assistance to meet objectives within a multi-cultural environment.</li><li>Extensive and hands-on understanding of modern terminal operations including computer terminal management systems.</li><li>Extensive and in depth understanding of vessel and yard planning.</li><li>Strong communication skills with the ability to communicate with team and customers.</li><li>Extensive knowledge of operational practices.</li><li>Fluent in English, both written and spoken.</li><li>Dynamic, rigorous, and strong tolerance for the elements.</li><li>Ability to work in shifts and long hours.</li><li>Solid understanding of the shipping industry in general and Port &amp; Terminals in specific.</li></ul>

<p>MEP Technician for Oman Company</p><p><strong>Desired Candidate Profile</strong></p><p>MEP Technician Exp. in Mechanical, Plumbing, Electrical work Exp. in BMS &amp; Facility Mgmt</p>

<p>MEP Technician for Oman Company</p><p><strong>Desired Candidate Profile</strong></p><p>MEP Technician Exp. in Mechanical, Plumbing, Electrical work Exp. in BMS &amp; Facility Mgmt</p>

<ul><li><p>Project management, estimation, coordination with factory, Design and develop mechanical systems and components, ensuring they meet industry standards and function efficiently under specified conditions.</p></li><li><p>Conduct simulations and analyses using CAD software to predict product performance and identify potential design flaws before prototyping.</p></li><li><p>Lead projects from concept through production, coordinating with cross-functional teams to ensure timely delivery and adherence to specifications.</p></li><li><p>Evaluate and select materials for projects by assessing their mechanical properties, cost, and availability, while considering environmental impact.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Diploma/Bachelor's degree in Mechanical Engineering or a related field, with a strong foundation in </p></li><li><p>Minimum of 2-3 years of relevant work experience in mechanical design or product development, preferably in the steel fabrication industry.</p></li><li><p>Proficiency in CAD software such as SolidWorks or AutoCAD, with the ability to create detailed 3D models and technical drawings is a must.</p></li></ul>

<p>Diagnose and troubleshoot hydraulic and mechanical systems in heavy commercial vehicles. Perform installation, servicing, maintenance, repair, and commissioning of hydraulic equipment. Inspect hydraulic pumps, motors, cylinders, valves, hoses, fittings, and hydraulic circuits. Identify hydraulic leakage, pressure, flow, overheating, and performance-related issues. Read and interpret hydraulic circuit diagrams, mechanical drawings, and technical manuals. Conduct preventive and breakdown maintenance of heavy vehicles and hydraulic systems. Perform hydraulic pressure and functional testing after repairs. Troubleshoot vehicle systems including hydraulic, mechanical, pneumatic, and related components. Attend customer/field service complaints and provide timely technical solutions. Coordinate with customers, workshops, technicians, and internal engineering teams. Maintain service reports, inspection reports, repair records, and maintenance documentation. Ensure compliance with safety procedures and manufacturer/service standards. Provide technical guidance and support to technicians and service teams.</p><p><strong>Desired Candidate Profile</strong></p><p>6-10 years + Diploma Mechanical + Heavy Commercial Vehicles + Hydraulics .</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Role: Operations, Maintenance &amp; Support - Other</b></p><p>Industry Type: Oil &amp; Gas</p><p>Department: Production, Manufacturing &amp; Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Operations, Maintenance &amp; Support</p><p>Education</p><p>UG: B.Tech / B.E. in Mechanical Engineering, Civil</p></div></section>

<p> <strong> </strong> </p> <p><strong style="font-size: 11px;">Hr.omc@omanmethanol.com</strong></p> <p> </p> <p> </p> <p> <strong>Job Vacancy Mechanical Engineer</strong> </p> <p>We are seeking a qualified Mechanical Engineer with not less than 3 years of experience in refineries, oil &amp; gas, or methanol plants.</p> <p>The candidate must hold a Mechanical Engineering degree with strong knowledge in pumps, compressors, turbines, and preventive maintenance.</p> <p>Excellent communication and teamwork skills are required.</p> <p><br></p> <p> </p> <p> </p> <p> </p>