Security Supervisor Jobs in Oman

<p>POSITION SUMMARY Our jobs aren t just about putting food on the table that our guests will enjoy until they ask for their bill. Instead, we want to build an experience that is memorable and unique with food and drinks on the side. Our Guest Service Support Experts take the initiative and deliver a wide range of services to make sure food and beverage operations run smoothly. Whether setting tables, assisting the kitchen, or cleaning work areas and replenishing supplies, the Guest Service Support Expert provides the support that make transactions feel like part of the experience. No matter what position you are in, there are a few things that are critical to success creating a safe workplace, following company policies and procedures, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional. Guest Service Support Experts will be on their feet and moving around (stand, sit, or walk for an extended time; moving over sloping, uneven, or slippery surfaces), managing the menu (read and visually verify information), and taking a hands-on approach to work (move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance and 50 pounds with assistance; reach overhead and below the knees, including bending, twisting, pulling, and stooping). Doing all these things well (and other reasonable job duties as requested) is critical for Guest Service Support Experts to get it right for our guests and our business each and every time.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High school diploma or G.E.D. equivalent. Related Work Experience: No related work experience. Previous experience in a food and beverage environment preferred. Supervisory Experience: No supervisory experience. License or Certification: None</p>

<p>POSITION SUMMARY Our jobs aren't just about putting food on the table that our guests will enjoy until they ask for their bill. Instead, we want to build an experience that is memorable and unique with food and drinks on the side. Our Guest Service Support Experts take the initiative and deliver a wide range of services to make sure food and beverage operations run smoothly. Whether setting tables, assisting the kitchen, or cleaning work areas and replenishing supplies, the Guest Service Support Expert provides the support that make transactions feel like part of the experience. No matter what position you are in, there are a few things that are critical to success creating a safe workplace, following company policies and procedures, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional. Guest Service Support Experts will be on their feet and moving around (stand, sit, or walk for an extended time; moving over sloping, uneven, or slippery surfaces), managing the menu (read and visually verify information), and taking a hands-on approach to work (move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance and 50 pounds with assistance; reach overhead and below the knees, including bending, twisting, pulling, and stooping). Doing all these things well (and other reasonable job duties as requested) is critical for Guest Service Support Experts to get it right for our guests and our business each and every time.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High school diploma or G.E.D. equivalent.</p><p>Related Work Experience: No related work experience. Previous experience in a food and beverage environment preferred.</p><p>Supervisory Experience: No supervisory experience.</p><p>License or Certification: None</p>

<p>POSITION SUMMARY Our jobs aren't just about putting food on the table that our guests will enjoy until they ask for their bill. Instead, we want to build an experience that is memorable and unique with food and drinks on the side. Our Guest Service Support Experts take the initiative and deliver a wide range of services to make sure food and beverage operations run smoothly. Whether setting tables, assisting the kitchen, or cleaning work areas and replenishing supplies, the Guest Service Support Expert provides the support that make transactions feel like part of the experience. No matter what position you are in, there are a few things that are critical to success: creating a safe workplace, following company policies and procedures, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional. Guest Service Support Experts will be on their feet and moving around (stand, sit, or walk for an extended time; moving over sloping, uneven, or slippery surfaces), managing the menu (read and visually verify information), and taking a hands-on approach to work (move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance and 50 pounds with assistance; reach overhead and below the knees, including bending, twisting, pulling, and stooping). Doing all these things well (and other reasonable job duties as requested) is critical for Guest Service Support Experts to get it right for our guests and our business each and every time.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Education: High school diploma or G.E.D. equivalent.</li><li>Related Work Experience: No related work experience. Previous experience in a food and beverage environment preferred.</li><li>Supervisory Experience: No supervisory experience.</li><li>License or Certification: None</li></ul>

<p><h4>Description</h4> <p>The opportunity</p> <p>A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. We are hiring an experienced PRO to manage the company's interaction with Omani government authorities on all matters relating to immigration, labour, civil status, and corporate registration.</p> <p>What the role covers</p> <ul> <li>End-to-end processing of employment visas, residence cards, and dependant visas; renewals in advance of expiry; cancellation on departure</li> <li>Labour clearances and work permits with the Ministry of Labour; Omanisation reporting and compliance</li> <li>Renewal of the company's commercial registration, Chamber of Commerce certificate, and related corporate filings</li> <li>Submission of corporate filings to the relevant authority on matters delegated by the Head of Corporate Services</li> <li>Collection and submission of documents to and from ministries, authorities, and embassies</li> <li>Attestation, notarisation, and translation of documents as required</li> <li>Safe transport and custody of original documents</li> </ul> <p>Requirements</p> <p>Who we are looking for</p> <ul> <li>At least five years as a PRO in Oman, ideally within a regulated financial services or international corporate environment</li> <li>Comprehensive working knowledge of Omani immigration, labour, and corporate registration procedures</li> <li>Established working relationships with the relevant ministries and authorities</li> <li>Valid Omani driving licence</li> <li>Fluent in Arabic; working English written and spoken</li> <li>Familiarity with authority procedures in an international financial centre context and prior experience supporting an international workforce with diverse nationalities are both advantages</li> </ul> <p>What this is</p> <p>This is a founding-team role at an institution that will employ an international workforce from the point of launch. The PRO function needs to be running without gaps from day one. If you have the procedural mastery and the established authority relationships to deliver that, this is worth a conversation.</p></p><p></p>

<p><h4>Description</h4> <p>The opportunity</p> <p>A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. We are hiring an experienced PRO to manage the company's interaction with Omani government authorities on all matters relating to immigration, labour, civil status, and corporate registration.</p> <p>What the role covers</p> <ul> <li>End-to-end processing of employment visas, residence cards, and dependant visas; renewals in advance of expiry; cancellation on departure</li> <li>Labour clearances and work permits with the Ministry of Labour; Omanisation reporting and compliance</li> <li>Renewal of the company's commercial registration, Chamber of Commerce certificate, and related corporate filings</li> <li>Submission of corporate filings to the relevant authority on matters delegated by the Head of Corporate Services</li> <li>Collection and submission of documents to and from ministries, authorities, and embassies</li> <li>Attestation, notarisation, and translation of documents as required</li> <li>Safe transport and custody of original documents</li> </ul> <p>Requirements</p> <p>Who we are looking for</p> <ul> <li>At least five years as a PRO in Oman, ideally within a regulated financial services or international corporate environment</li> <li>Comprehensive working knowledge of Omani immigration, labour, and corporate registration procedures</li> <li>Established working relationships with the relevant ministries and authorities</li> <li>Valid Omani driving licence</li> <li>Fluent in Arabic; working English written and spoken</li> <li>Familiarity with authority procedures in an international financial centre context and prior experience supporting an international workforce with diverse nationalities are both advantages</li> </ul> <p>What this is</p> <p>This is a founding-team role at an institution that will employ an international workforce from the point of launch. The PRO function needs to be running without gaps from day one. If you have the procedural mastery and the established authority relationships to deliver that, this is worth a conversation.</p></p><p></p>

<p>The Senior Power System Secondary Engineer acts as the technical authority on behalf of the project developer, providing independent oversight, review, and verification of all secondary systems engineering across utility-scale renewable energy plants (Solar PV, Wind) and Battery Energy Storage Systems (BESS). The role is pivotal in ensuring that designs delivered by EPC contractors and specialist consultants are technically sound, safe, cost-effective, and fully compliant with International Best Practices, utility / TSO requirements, and applicable International Standards (IEC, IEEE/ANSI). </p><br><p>Design Review & Verification</p><ul><li><p>Lead the review and verification of all secondary design deliverables — including Single Line</p></li></ul><p>Diagrams (SLDs), Protection & Metering Diagrams (PMDs), Block Logic Diagrams (BLDs), AC/DC</p><p>schematics, and LV System Design Documents — for HV substations and renewable plants.</p><ul><li><p>Verify protection and control philosophies, including relay settings, selectivity analyses, and</p></li></ul><p>coordination studies (short-circuit calculations, CT/VT sizing) prepared by consultants and EPC</p><p>contractors.</p><ul><li><p>Review and approve interlocking schemes, bay-level logic, and station-level automation across</p></li></ul><p>switchgear, transformers, feeders, and renewable energy plant interfaces.</p><p>Substation Automation & SCADA</p><ul><li><p>Approve substation automation and SCADA architectures, ensuring correct implementation of IED</p></li></ul><p>logic, signal lists, and interlocking schemes at bay and station levels.</p><ul><li><p>Oversee the integration and configuration of communication protocols — IEC 61850</p></li></ul><p>(GOOSE/SV/MMS), IEC 60870-5-104, and DNP3 — governing data flow between Plant Power</p><p>Controllers (PPC/EMS), substations, and utility control centers.</p><ul><li><p>Review IED configurations, substation HMI displays, and historian / data management architectures</p></li></ul><p>for completeness and compliance.</p><p>Telecommunications & Cybersecurity</p><ul><li><p>Review and validate communication and telecommunication architectures, including managed</p></li></ul><p>network design (VLANs, PRP/HSR redundancy), cybersecurity policies (IEC 62351 / NERC-CIP</p><p>aligned), and tele-protection performance requirements.</p><p>Standards, Compliance & Grid Code Adherence</p><ul><li><p>Ensure strict adherence to international standards and grid codes (IEC, IEEE/ANSI) by performing</p></li></ul><p>technical audits and vetting technical submissions to Transmission / Distribution System Operators</p><p>(TSO/DSO).</p><ul><li><p>Manage technical interfaces and coordinate between EPC contractors, engineering consultants,</p></li></ul><p>OEMs, and the grid operator to ensure a coherent and optimized secondary systems design.</p><p>Testing, Commissioning & Project Governance</p><ul><li><p>Provide technical governance during critical project phases, including witnessing Factory</p></li></ul><p>Acceptance Tests (FAT) and Site Acceptance Tests (SAT), and reviewing commissioning</p><p>procedures for all secondary systems.</p><ul><li><p>Review and approve test plans, testing protocols, punch lists, and commissioning records to ensure</p></li></ul><p>safe energization of HV substations and plant systems.</p><ul><li><p>Act as the Owner’s Engineer representative in te</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education</p><ul><li><p>Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or a closely related field.</p></li><li><p>Professional Engineering registration (PE / CEng or equivalent) is an advantage.</p></li></ul><p>Experience</p><ul><li><p>8+ years of engineering experience with a demonstrable focus on substation secondary systems</p></li></ul><p>design and delivery.</p><ul><li><p>Significant experience in a developer, owner’s engineer, or utility role with direct responsibility for</p></li></ul><p>managing and challenging EPC contractor deliverables.</p><ul><li><p>Proven track record on grid-connected utility-scale renewable energy projects (Solar PV, Wind)</p></li></ul><p>and/or Battery Energy Storage Systems (BESS).</p><ul><li><p>Experience working across the full project lifecycle from FEED and detailed design through to FAT,</p></li></ul><p>SAT, and commercial operation</p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Instrumentation Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all instrumentation systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of field instrumentation, analyzers, control valves, actuators, weighing systems, process measurement systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of instrumentation systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p><b>Detailed Description </b></p> <p>INSTRUMENTATION MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for instrumentation systems across the concentrator plant and supporting infrastructure.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, instrumentation standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on instrumentation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for instrumentation systems and equipment.</p> <p>INSTRUMENTATION AUTOMATION / PLC / DCS INTERFACE</p> <p>Provide technical leadership for the interface between field instrumentation and PLC, DCS, SCADA, and associated automation systems.</p> <p>Ensure reliable communication and signal integrity between transmitters, analyzers, control valves, actuators, weighing systems, and PLC/DCS/SCADA systems.</p> <p>Support troubleshooting of instrumentation-related PLC/DCS input and output signals, communication faults, alarms, interlocks, and control-loop performance issues.</p> <p>Coordinate with Automation and Electrical teams for instrument signal interfaces, control system modifications, logic changes, and system upgrades.</p> <p>Review instrumentation requirements for PLC/DCS/SCADA modifications, including I/O requirements, signal types, communication protocols, alarm and trip interfaces, and control-loop functionality.</p> <p>Support loop checking, instrument calibration, functional testing, interlock testing, commissioning, energization, and startup activities involving instrumentation and automation systems.</p> <p>Ensure proper configuration, documentation, and management of instrument I/O, loop drawings, instrument data sheets, cause-and-effect diagrams, alarm settings, and associated technical documentation.</p> <p>Participate in troubleshooting and Root Cause Failure Analysis (RCFA) where instrumentation, PLC/DCS, or communication-system interfaces contribute to equipment or process failures.</p> <p>Support implementation of improvements to process control, instrumentation reliability, measurement accuracy, and automation system performance.</p> <p>Ensure instrumentation and automation interfaces comply with approved engineering standards, OEM requirements, cybersecurity requirements, HSE procedures, and applicable statutory requirements.</p> <p>INSTRUMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for field instrumentation, analyzers, control valves, actuators, weighing systems, sampling systems, and process monitoring equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major instrumentation failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor instrument performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs for critical instrumentation assets.</p> <p>PROCESS INSTRUMENTATION &amp; ANALYZER SYSTEMS</p> <p>Ensure safe and reliable operation of process instrumentation systems.</p> <p>Maintain pressure, flow, level, temperature, density, pH, conductivity, and other process measurement devices.</p> <p>Maintain online analyzers, sampling systems, and associated instrumentation.</p> <p>Monitor instrument accuracy and implement corrective actions where necessary.</p> <p>Ensure compliance with calibration standards and measurement integrity requirements.</p> <p>Support process optimization and operational efficiency initiatives through accurate measurement and monitoring.</p> <p><br></p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Instrumentation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Instrumentation assets in large-scale mineral processing facilities.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP)</p> <p> ISA Certified Control Systems Technician (CCST)</p> <p> ISA Certified Automation Professional (CAP)</p> <p> Six-sigma (BB)</p> <p> </p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Instrumentation Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all instrumentation systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of field instrumentation, analyzers, control valves, actuators, weighing systems, process measurement systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of instrumentation systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>INSTRUMENTATION MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for instrumentation systems across the concentrator plant and supporting infrastructure.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, instrumentation standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on instrumentation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for instrumentation systems and equipment.</p> <p>INSTRUMENTATION AUTOMATION / PLC / DCS INTERFACE</p> <p>Provide technical leadership for the interface between field instrumentation and PLC, DCS, SCADA, and associated automation systems.</p> <p>Ensure reliable communication and signal integrity between transmitters, analyzers, control valves, actuators, weighing systems, and PLC/DCS/SCADA systems.</p> <p>Support troubleshooting of instrumentation-related PLC/DCS input and output signals, communication faults, alarms, interlocks, and control-loop performance issues.</p> <p>Coordinate with Automation and Electrical teams for instrument signal interfaces, control system modifications, logic changes, and system upgrades.</p> <p>Review instrumentation requirements for PLC/DCS/SCADA modifications, including I/O requirements, signal types, communication protocols, alarm and trip interfaces, and control-loop functionality.</p> <p>Support loop checking, instrument calibration, functional testing, interlock testing, commissioning, energization, and startup activities involving instrumentation and automation systems.</p> <p>Ensure proper configuration, documentation, and management of instrument I/O, loop drawings, instrument data sheets, cause-and-effect diagrams, alarm settings, and associated technical documentation.</p> <p>Participate in troubleshooting and Root Cause Failure Analysis (RCFA) where instrumentation, PLC/DCS, or communication-system interfaces contribute to equipment or process failures.</p> <p>Support implementation of improvements to process control, instrumentation reliability, measurement accuracy, and automation system performance.</p> <p>Ensure instrumentation and automation interfaces comply with approved engineering standards, OEM requirements, cybersecurity requirements, HSE procedures, and applicable statutory requirements.</p> <p>INSTRUMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for field instrumentation, analyzers, control valves, actuators, weighing systems, sampling systems, and process monitoring equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major instrumentation failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor instrument performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs for critical instrumentation assets.</p> <p>PROCESS INSTRUMENTATION &amp; ANALYZER SYSTEMS</p> <p>Ensure safe and reliable operation of process instrumentation systems.</p> <p>Maintain pressure, flow, level, temperature, density, pH, conductivity, and other process measurement devices.</p> <p>Maintain online analyzers, sampling systems, and associated instrumentation.</p> <p>Monitor instrument accuracy and implement corrective actions where necessary.</p> <p>Ensure compliance with calibration standards and measurement integrity requirements.</p> <p>Support process optimization and operational efficiency initiatives through accurate measurement and monitoring.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor's Degree in Instrumentation, Electronics, Control Systems, Automation, Mechatronics, or Electrical &amp; Instrumentation Engineering is mandatory.</p> <p><b>Experience</b>: </p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Instrumentation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Instrumentation assets in large-scale mineral processing facilities.</p> <p><br></p>

<div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Our jobs aren t just about giving guests a smooth check-in and check-out. Instead, we want to build and experience that is memorable and unique. Our Guest Experience Experts take the initiative to deliver a wide range of services that guide guests through their entire stay. They are empowered to move about their space and do what needs to be done. Whether processing operational needs, addressing guest requests, completing reports, or sharing the highlights of the local area, the Guest Experience Expert makes transactions feel like part of the experience.</p> <p> </p> <p>No matter what position you are in, there are a few things that are critical to success creating a safe work place, following company policies and procedures, maintaining confidentiality, protecting company assets, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional. Guest Experience Experts will be on their feet and moving around (stand, sit, or walk for an extended time) and taking a hands-on approach to work (move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance). Doing all these things well (and other reasonable job duties as requested) is critical for Guest Experience Experts to get it right for our guests and our business each and every time.</p> <p> </p> <p>PREFERRED QUALIFICATIONS</p> <p>Education: High school diploma or G.E.D. equivalent.</p> <p>Related Work Experience: No related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: None</p> <p> </p> <p> </p> </div> <div> </div> <p> <i>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</i> </p>

<p><h4>Overview</h4> <p>An opportunity is available for an experienced LNG subject matter expert to support major brownfield modification and execution activities across onshore LNG facilities in Oman and Qatar. This role focuses on construction planning, execution sequencing, and operational interface management within live plant environments.<br> You will act in a key advisory capacity, supporting EPC execution while ensuring safe, efficient, and well-coordinated delivery in complex operational settings.</p> <h4>Key responsibilities</h4> <ul> <li>Provide subject matter expertise across LNG brownfield execution and modification works</li> <li>Support demolition, revamp, and major facility modification activities</li> <li>Develop construction sequencing and execution logic aligned with isolations and area handovers</li> <li>Link execution sequencing to work packs, job cards, and field execution plans</li> <li>Review and support planning of SIMOPS activities within live operating environments</li> <li>Ensure effective application of PTW systems, isolations, and operational constraints</li> <li>Assess constructability including access, lifting strategies, and logistics planning</li> <li>Provide field-based input into execution planning and readiness reviews</li> <li>Review EPC execution strategies and provide guidance from an owner's perspective</li> <li>Challenge and validate contractor plans to ensure safe and efficient delivery</li> <li>Coordinate with operations teams, EPC contractors, and internal stakeholders</li> <li>Support site-based execution planning and problem solving during implementation</li> </ul> <h4>Requirements</h4> <ul> <li>Strong experience in LNG brownfield projects within oil and gas facilities</li> <li>Demonstrated background in demolition, revamp, and modification scopes</li> <li>Strong construction planning capability, including sequencing and workpack development</li> <li>Practical understanding of PTW systems, isolations, and SIMOPS environments</li> <li>Hands-on site experience in construction or execution environments</li> <li>Strong knowledge of constructability, lifting operations, and logistics constraints</li> <li>Experience working with major oil and gas operators preferred</li> <li>Strong communication, coordination, and stakeholder management skills</li> <li>Ability to work in high-pressure, live plant environments</li> <li>Owner's mindset with ability to influence EPC contractors and execution teams</li> <li>Willingness and ability to mobilise to Qatar at short notice</li> </ul> <h4>Additional information</h4> <ul> <li>Exposure to major LNG brownfield operations</li> <li>Role requires significant site-based involvement across Oman and Qatar</li> <li>Fast mobilisation required</li> </ul></p><p></p>

<p>We are looking for a Safety Officer to support our heat exchanger maintenance project at OQ Refinery, Oman. The Safety Officer will be responsible for monitoring site safety, conducting inspections, supporting risk assessments, ensuring compliance with HSE procedures, and promoting a strong safety culture at the worksite.</p><p>Key Responsibilities</p><ul><li><p>Monitor and enforce HSE rules and procedures at the worksite.</p></li><li><p>Conduct daily safety inspections and identify unsafe conditions.</p></li><li><p>Support preparation and review of Risk Assessments, JSA and Method Statements.</p></li><li><p>Monitor Permit-to-Work (PTW) activities.</p></li><li><p>Ensure compliance with safety requirements for confined space, hot work, working at height and LOTO.</p></li><li><p>Conduct toolbox talks and safety inductions.</p></li><li><p>Support incident and near-miss investigations.</p></li><li><p>Monitor safety during heat exchanger maintenance activities, including hydrojetting, chemical cleaning, retubing, blinding/deblinding and lifting activities.</p></li><li><p>Ensure proper use of PPE and compliance with site safety requirements.</p></li><li><p>Prepare and maintain HSE reports and records.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>NEBOSH certification is required.</strong></p></li><li><p>Bachelor's degree/Diploma in Occupational Health & Safety, Engineering, or a related technical field.</p></li><li><p>Good knowledge of HSE procedures and workplace safety.</p></li><li><p>Knowledge of Oil & Gas / Refinery safety practices will be an advantage.</p></li><li><p>Candidates with knowledge of heat exchanger maintenance activities will be preferred.</p></li><li><p>Freshers / candidates without previous experience may also apply.</p></li><li><p><strong>Omani National</strong></p></li><li><p>Good communication and interpersonal skills.</p></li></ol>

<p>Construct and install wooden/plywood formwork for columns, beams, slabs, walls, and foundations. Read and follow construction drawings, measurements, and site instructions. Cut, shape, assemble, and install timber and plywood according to required dimensions. Ensure formwork is properly aligned, levelled, supported, and secured before concrete pouring. Dismantle and remove formwork safely after concrete has sufficiently set. Carry out carpentry repairs, adjustments, and modification work at the construction site. Use carpentry hand tools and power tools safely and efficiently. Coordinate with steel fixers, masons, supervisors, and other site workers. Maintain proper quality and accuracy of carpentry work. Follow construction-site safety procedures and wear required PPE. Keep tools, materials, and work areas clean and organized.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: 10th / 12th Pass / Any Graduate can be considered. Experience: Preferably 2 5+ years of relevant construction carpentry experience . Candidates with GCC/Oman construction experience will be preferred. Experience in shuttering/formwork carpentry is an advantage. ITI/Diploma in Carpentry or related trade is preferred but not mandatory . Must be able to understand measurements and basic construction drawings. Should be physically fit and comfortable working at construction sites and heights. Hardworking, disciplined, and able to work as part of a team.</p>

<p>About the Role:-</p><p>We are seeking a creative, passionate, and experienced <strong>Art Teacher</strong> to join our Middle Section. The successful candidate will be responsible for developing students’ artistic skills, creativity, imagination, and appreciation of visual arts through engaging and age-appropriate lessons aligned with the CBSE curriculum.</p><br><p>Key Responsibilities:-</p><br><ul><li><p>Plan and deliver engaging Art & Visual Arts lessons for students in Grades VI–VIII.</p></li><li><p>Develop students’ skills in drawing, sketching, painting, craft, design, and other art forms.</p></li><li><p>Prepare lesson plans, teaching resources, activities, and practical projects.</p></li><li><p>Introduce students to different artistic techniques, styles, artists, and art traditions.</p></li><li><p>Encourage creativity, self-expression, experimentation, and independent thinking.</p></li><li><p>Assess students’ artistic development and maintain appropriate academic records.</p></li><li><p>Provide constructive feedback to help students improve their artistic skills.</p></li><li><p>Organise and support art exhibitions, competitions, displays, cultural programmes, and school events.</p></li><li><p>Display students’ artwork around the school to create an inspiring learning environment.</p></li><li><p>Maintain and manage art materials, equipment, and classroom resources responsibly.</p></li><li><p>Ensure a safe, clean, and well-organised art classroom.</p></li><li><p>Integrate technology and innovative teaching methods where appropriate.</p></li><li><p>Collaborate with other teachers and participate in school activities and professional development programmes.</p></li><li><p>Maintain effective communication with students, parents, and school management.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><br><p>Required Qualifications:-</p><br><ul><li><p>Bachelor’s degree in <strong>Fine Arts / Visual Arts / Applied Arts</strong> or a relevant discipline.</p></li><li><p><strong>B.Ed. in Fine Arts / Art Education</strong> is preferred.</p></li><li><p>Qualification should meet applicable <strong>CBSE and Oman Ministry of Education requirements</strong>.</p></li><li><p>Minimum <strong>5 years of relevant teaching experience</strong>, preferably in a CBSE or Indian school.</p></li><li><p>Experience teaching students at the Middle School level is preferred.</p></li><li><p>Strong knowledge of drawing, painting, sketching, craft, and other visual art techniques.</p></li><li><p>Good communication and classroom management skills.</p></li><li><p>Ability to plan creative, student-centred and activity-based lessons.</p></li><li><p>Valid experience certificates and relevant educational documents are required.</p></li></ul><br><p>Desirable Skills:-</p><br><ul><li><p>Knowledge of Indian and international art traditions.</p></li><li><p>Ability to conduct art workshops and extracurricular activities.</p></li><li><p>Experience preparing students for art competitions and exhibitions.</p></li><li><p>Basic knowledge of digital art and design tools will be an advantage.</p></li><li><p>Creative, patient, enthusiastic, and adaptable approach to teaching.</p></li><li><p>Ability to work effectively as part of a multicultural school community.</p></li></ul>

<p><h4>Description</h4> <p>Apt Resources is seeking an Electrical ETP Officer to join our client's dairy farm operations in Abu Dhabi. In this role, you will be responsible for overseeing the electrical systems of the Effluent Treatment Plant (ETP) and ensuring that they operate efficiently and safely. Your expertise will play a critical role in maintaining compliance with environmental regulations and supporting sustainable farming practices.</p> <h4>Responsibilities</h4> <ul> <li>Oversee and maintain the electrical systems within the Effluent Treatment Plant (ETP).</li> <li>Diagnose and repair electrical faults in ETP machinery and equipment.</li> <li>Perform routine inspections and preventive maintenance on electrical installations.</li> <li>Ensure adherence to safety standards and environmental regulations.</li> <li>Keep abreast of industry best practices and advancements in ETP technology.</li> <li>Assist in developing and implementing electrical maintenance procedures and protocols.</li> <li>Respond to electrical emergencies and outages, coordinating with other departments as needed to resolve issues quickly and efficiently.</li> <li>Maintain accurate records of electrical maintenance activities, repairs, and system performance.</li> <li>Prepare reports on electrical system status, issues, and improvements for management review.</li> <li>Perform regular preventive maintenance on electrical systems to minimize downtime and prevent malfunctions.</li> <li>Diagnose and repair electrical faults and issues promptly to ensure continuous operation of the ETP.</li> <li>Monitor the performance of electrical systems to ensure optimal efficiency and compliance with operational standards.</li> <li>Implement improvements and upgrades to enhance system performance and energy efficiency.</li> <li>Conduct safety inspections and risk assessments to prevent electrical hazards and ensure a safe working environment.</li> </ul> <h4>Requirements</h4> <ul> <li>Diploma or degree in Electrical Engineering or a related field.</li> <li>At least 3 years of experience in electrical maintenance, ideally within a dairy farm, agricultural setting, or ETP environment.</li> <li>Strong knowledge of electrical systems, components, and machinery.</li> <li>Experience with PLCs (Programmable Logic Controllers) and SCADA (Supervisory Control and Data Acquisition) systems is a plus.</li> <li>Skilled in diagnosing and resolving electrical issues effectively.</li> <li>Exceptional attention to detail and problem-solving abilities.</li> <li>Good communication skills and the ability to work collaboratively within a team.</li> <li>Ability to work independently, manage multiple tasks, and handle responsibilities efficiently.</li> <li>Understanding of safety standards and environmental regulations relevant to electrical systems.</li> </ul> <h4>Benefits</h4> <p><strong>AED 4,500</strong> plus accommodation, food, toiletries, and other benefits as per UAE labor law.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The core responsibilities include the meticulous evaluation, selection, retrieval, and arrangement of documents. This involves proficient copying, scanning, and secure storage of all essential paperwork. A key duty is the creation and maintenance of accessible, retrievable computer archives and databases. The role requires organizing archival records and developing effective classification systems to ensure easy access to archival materials. Preparation of archival records, such as document descriptions, is crucial for facilitating information access. Accuracy checks and editing of files, including contracts, are a daily task. Reviewing and updating technical documents, like manuals and workflows, ensures organizational efficiency. Creating templates for future use streamlines processes. Maintaining confidentiality around sensitive information and terms of agreement is paramount. Managing the flow of documentation across various departments, including human resources, marketing, and construction, is essential. Finally, supervising the direct viewing of documents and retrieving copies of materials is part of the supervisory aspect of this role.</p></div></section>

<p><h4>Role summary</h4> <p>Working unsupervised, installing the ESP, monitoring, troubleshooting, and testing downhole ESP equipment to maximize well productivity and ESP run life.</p> <h4>Essential responsibilities</h4> <ul> <li>Under general supervision performs installation/pulling of Electrical Submersible Pumps (ESP) and associated equipment in onshore oil and water wells.</li> <li>May be required to work unsupervised.</li> <li>Assists with monitoring, troubleshooting, and testing downhole ESP equipment to maximize well productivity and ESP run life.</li> <li>The position involves frequent travel on domestic assignments and time away from home, often at short notice. Handles special projects as assigned.</li> <li>Conducts all business activities in accordance with HSE policies and legal compliance requirements.</li> </ul> <h4>Essential requirements of the role (experience / skills / competencies)</h4> <ul> <li>Years of experience: Minimum of 3 years of experience in Electrical Submersible Pump installation, commissioning, and troubleshooting are mandatory.</li> <li>Field of experience: Artificial Lift Systems - Electrical Submersible Pump installation and pull-out activities.</li> <li>Technical skills: <ul> <li>In-depth knowledge of downhole Electrical Submersible Pump systems.</li> <li>Experience with ESP downhole installation and pullout, as well as troubleshooting surface equipment.</li> <li>Analytical skills to route ESP problems during troubleshooting.</li> </ul> </li> <li>Soft skills: Customer focus, communication, interpersonal, and team working skills.</li> <li>Tools or software (required / preferred): MS Office.</li> <li>Education qualifications: Diploma or bachelor’s degree.</li> <li>Industry background or experience (required / preferred): Oil and Gas - Artificial Lift System Electrical Submersible Pump required.</li> <li>Required accreditations / qualifications / certification / licenses including driving license: LMV defensive driving experience.</li> </ul> <h4>Desirable attributes of the worker (experience / skills / competencies)</h4> <ul> <li>In-depth knowledge of downhole Electrical Submersible Pump systems.</li> <li>Experience with ESP downhole installation and pullout, as well as troubleshooting surface equipment.</li> <li>Minimum of 3 years of experience in Electrical Submersible Pump commissioning and troubleshooting responsibilities is mandatory.</li> <li>Analytical skills to route ESP problems during troubleshooting.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining, and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p><h4>Role summary</h4> <p>Working unsupervised, installing the ESP, monitoring, troubleshooting, and testing downhole ESP equipment to maximize well productivity and ESP run life.</p> <h4>Essential responsibilities</h4> <ul> <li>Under general supervision performs installation/pulling of Electrical Submersible Pumps (ESP) and associated equipment in onshore oil and water wells.</li> <li>May be required to work unsupervised.</li> <li>Assists with monitoring, troubleshooting, and testing downhole ESP equipment to maximize well productivity and ESP run life.</li> <li>The position involves frequent travel on domestic assignments and time away from home, often at short notice. Handles special projects as assigned.</li> <li>Conducts all business activities in accordance with HSE policies and legal compliance requirements.</li> </ul> <h4>Essential requirements of the role (experience / skills / competencies)</h4> <ul> <li>Years of experience: Minimum of 3 years of experience in Electrical Submersible Pump installation, commissioning, and troubleshooting are mandatory.</li> <li>Field of experience: Artificial Lift Systems - Electrical Submersible Pump installation and pull-out activities.</li> <li>Technical skills: <ul> <li>In-depth knowledge of downhole Electrical Submersible Pump systems.</li> <li>Experience with ESP downhole installation and pullout, as well as troubleshooting surface equipment.</li> <li>Analytical skills to route ESP problems during troubleshooting.</li> </ul> </li> <li>Soft skills: Customer focus, communication, interpersonal, and team working skills.</li> <li>Tools or software (required / preferred): MS Office.</li> <li>Education qualifications: Diploma or bachelor’s degree.</li> <li>Industry background or experience (required / preferred): Oil and Gas - Artificial Lift System Electrical Submersible Pump required.</li> <li>Required accreditations / qualifications / certification / licenses including driving license: LMV defensive driving experience.</li> </ul> <h4>Desirable attributes of the worker (experience / skills / competencies)</h4> <ul> <li>In-depth knowledge of downhole Electrical Submersible Pump systems.</li> <li>Experience with ESP downhole installation and pullout, as well as troubleshooting surface equipment.</li> <li>Minimum of 3 years of experience in Electrical Submersible Pump commissioning and troubleshooting responsibilities is mandatory.</li> <li>Analytical skills to route ESP problems during troubleshooting.</li> </ul> <p>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining, and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p> <strong>Job description</strong> </p> <p> <strong>Job Purpose </strong> </p> <p>This position is part of senior leadership team entrusted with spearheading the company forward. It works in close co-ordination with the company s CEO and other key personnel, to manage and run the operations of the farm, plant, bottle production, maintenance, stores, and inventory departments.</p> <p>The main purpose of the position is to implement tactical strategy and strategic operational goals to exceed customer expectation on product quality, cost, and delivery, maximizing efficiency, optimizing production levels, and driving operational excellence. Working closely with internal and external key stakeholders, regarding technical support for activities, striving for best-in-class products and business practices to deliver to the customer s expectations, managing teams and projects across the business.</p> <p>Provide clear leadership and vision, inspire, and motivate staff to achieve excellence and mentor them as they develop new skills. Drive Key Performance Indicators across all areas of the Manufacturing function to ensure that all projects are delivered on cost and on time to the highest quality standards. Ensure Health, Safety and Environmental issues are prioritized and facilitated, direct and drive implementation of Lean Business strategy and drive Continuous Improvement across all areas.</p> <p> </p> <p> <strong>Main Tasks &amp; Accountabilities</strong> </p> <p> </p> <p> <strong>Strategy and Development</strong> </p> <ul> <li>Ensure complete responsibility for Manufacturing activities across the business.</li> <li>Ensure to create and implement best practice manufacturing vision, strategy, policies, processes, and procedures to aid and improve business performance.</li> <li>Ensure that manufacturing strategies and processes are in place to meet business objectives and operational needs in terms of price, quality and delivery targets and which enables the company to function and compete effectively in the market.</li> <li>Evaluate the challenges faced by the business and take action to mitigate risks and develop opportunities.</li> <li>Contribute to overall business strategy and annual budget process.</li> <li>Take ownership of the manufacturing policy, guidelines and any associated documents.</li> <li>Initiate and develop creative and innovative manufacturing processes.</li> </ul> <p> </p> <p> <strong>Farm Management</strong> </p> <ul> <li>Ensure the department follows and implement all policies and procedures for good dairy farming practice so that safe and good quality milk can be produced at least cost.</li> <li>Ensure good biosecurity, dairy farming practice that include management practices that are sustainable, social, economic, and environmentally friendly. </li> <li>Ensure that the department implements all the steps for the maintenance of good farming practice.</li> </ul> <p> </p> <p> <strong>Central Processing Plant -Management</strong> </p> <ul> <li>Ensure that all the systems and processes for the Processing Plant are implemented.</li> <li>Ensure that all the documents and procedures are created for Certificate of Analysis covering the production, service, packaging, storage and administration areas.</li> <li>Ensure the upkeep of the entire plant facility and infrastructure.</li> </ul> <p> </p> <p> <strong>Bottle Production Management</strong> </p> <ul> <li>Ensure overall material planning, molding, filling, sealing, labeling, and bagging process is followed and implemented.</li> <li>Plan and ensure the entire process including segregating the products into PET, HDPE, IML, POUCH and the quantities of each type of packaging is worked on.</li> <li>Ensure that the material requirement for blow molding or injection molding the containers for packaging the targeted produce is estimated correctly.</li> <li>Manage all areas of packaging including blow molding / injection molding, filling, capping and sealing, labeling and bagging to ensure a seamless process.</li> </ul> <p> </p> <p> <strong>Maintenance</strong> </p> <ul> <li>Support &amp; ensure the smooth running of the production process.</li> <li>Manage and direct engineering workforce.</li> <li>Plan, organize, ensure and review maintenance schedules, shift working and related activities within the maintenance department. </li> <li>Design, plan and implement to ensure availability of emergency response (on and off-hour) including equipment repair, damage control, and assignment of support personnel as needed.</li> <li>Ensure preventive &amp; periodical Maintenance schedule is being implemented smoothly.</li> <li>Design, implement and maintain preventive as well as predictive maintenance programs with the help of the maintenance team.</li> <li>Establish with the department agreed planned services.</li> <li>Advise to the department on relevant maintenance replacements and upgrades required on a periodic basis.</li> <li>Ensure curative &amp; service Maintenance.</li> <li>Investigate and resolve technical problems within stipulated timelines with the help of a competent team.</li> </ul> <p> </p> <p><br></p><ul> </ul> <p> </p> <p> <strong>Education Level Minimum Requirement</strong> </p> <p>Bachelors / Master's Degree or MBA would be an added advantage.</p> <p> </p> <p> <strong>Professional Qualifications</strong> </p> <ul> <li>Preferably a Fellow or Chartered Member of an industry related Professional Body.</li> <li>Six Sigma Certification preferred.</li> <li>Supply Chain Certification preferred.</li> </ul> <p> </p> <p> <strong>Work Experience </strong> </p> <p>Overall experience of 15+ years experience in Manufacturing industry within fresh Food and Dairy dynamic business environment.</p> <p> </p> <p><br></p>

<p>The Livestock Husbandry Officer is responsible for planning, implementing, monitoring, and improving livestock production systems with a focus on animal nutrition, fodder production, herd health management, milk production, meat production, animal welfare, and farm productivity. The position supports the development of sustainable and climate-resilient livestock systems in Oman while ensuring compliance with national veterinary, food safety, and biosecurity regulations. The position ensures data collection and reporting by maintaining livestock production databases and farm records, analyzing production, health, and economic performance indicators, preparing technical reports, progress reports, and recommendations, supporting livestock sector assessments and feasibility studies and contributing to national livestock development initiatives and projects.</p><p><strong>ENGAGEMENT</strong></p><ul><li>Coordinate stakeholder engagement with government agencies, private-sector actors, financial institutions, and development partners to ensure coordinated delivery and alignment with national priorities.</li><li>Foster coherent collaboration across program staff and stakeholders to ensure complementarity, transparency, and efficient joint implementation.</li><li>Promote a team culture aligned with GGGI s values of Trust, Transparency, Respect, and Partnership.</li><li>Report directly to the Chief of Party on livestock husbandry-related activities and coordination with other workstreams.</li><li>Represent the program in meetings, workshops, and calls as delegated, ensuring effective follow-up and timely documentation.</li></ul><p><strong>DELIVERY</strong></p><ul><li><strong>Livestock Production Management:</strong> Provide technical support for cattle, camel, and small ruminant production systems; monitor herd performance indicators (growth, mortality, reproduction, milk yield, and meat efficiency); and assist stakeholders in adopting improved breeds and production technologies.</li><li><strong>Feed, Nutrition, and Fodder Management:</strong> Formulate balanced, cost-effective rations and introduce alternative, climate-smart feed resources and conservation techniques (silage and hay) suited for arid environments. Assess fodder availability to develop sustainable production plans including Rhodes grass, Alfalfa, Sorghum, Maize silage, and hydroponics that reduce reliance on imported feed while optimizing water management.</li><li><strong>Animal Health, Biosecurity and Dairy/Meat Development:</strong> Partner with veterinary teams to implement disease prevention, vaccination, and biosecurity protocols while ensuring compliance with Omani notifiable disease reporting and antimicrobial stewardship. Monitor dairy/meat performance to improve milk hygiene, mastitis control, fattening programs, and carcass quality.</li><li><strong>Capacity Building and Extension Services:</strong> Deliver targeted training manuals, guidelines, and climate-smart livestock extension programs for farmers, cooperatives, and local personnel, with a specific focus on mainstreaming women and youth participation across livestock value chains.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in: Animal Science, Animal Production, Livestock Production, Veterinary Science, Agricultural Science (Livestock Specialization)</li><li>Preferred: Master's degree in animal nutrition, ruminant production, dairy science, veterinary public health, or related field.</li><li>6-8 years of relevant experience in livestock production, husbandry, and farm management</li><li>Proven practical experience in dairy and/or meat production systems, feed formulation, and fodder production under arid or semi-arid environments.</li><li>Familiarity of animal health management and biosecurity practices, and smallholder/commercial livestock operations</li><li>Experience in arid and semi-arid environments.</li><li>Experience in GCC countries, particularly Oman.</li><li>Experience in donor-funded agricultural development projects.</li><li>Fluency in English (written and spoken) is required. Knowledge of Arabic is an asset.</li></ul><p><strong>FUNCTIONAL</strong></p><ul><li>Strong ability to interpret, outline and implement guidelines, policies, and procedures effectively.</li><li>Excellent interpersonal skills to manage diverse stakeholder needs and foster collaboration.</li><li>Strategic thinker with capacity for joint problem-solving and decision-making.</li><li>Highly organized, detail-oriented, and able to prioritize under time constraints.</li><li>Demonstrates creativity, innovation, flexibility, and entrepreneurial mindset in achieving outputs.</li><li>Comfortable working independently and within a team environment.</li><li>Excellent interpersonal and facilitation skills, capable of translating complex concepts around bioeconomy to a wider audience.</li><li>Proven experience in mainstreaming safeguards, gender, poverty reduction, and social inclusion in project delivery.</li></ul><p><strong>CORPORATE</strong></p><ul><li>Understand and actively support GGGI's mission, vision and values.</li><li>Promote an organizational culture of trust, transparency, respect and partnership.</li><li>Excel at problem solving, ask questions and seek support when needed, easily share information and knowledge with others both internally as externally.</li><li>Manage emotions and stress positively, build rapport and resolve conflict easily.</li><li>Strong ability to work independently and/or remotely, while maintaining productivity.</li><li>Be able to lead and manage a program workstream independently, while knowing when to seek advice and liaise closely with the relevant GGGI structures.</li></ul>

<p><b>JOB PURPOSE</b></p> <p>The Reliability, Inspection and Design Superintendent is responsible for developing and implementing asset reliability strategies, inspection programs, engineering standards, and maintenance improvement initiatives to maximize equipment availability, safety, and asset life.The role leads reliability engineering, condition monitoring, equipment inspection, failure analysis, and maintenance optimization activities while providing technical support for plant modifications, upgrades, projects, commissioning, and operational excellence initiatives. A key focus is establishing asset management systems and reliability processes to support commissioning, ramp-up, and sustainable long-term operation of the concentrator plant.</p> <p> </p> <p><b><br></b></p><p><b>MAIN TASKS, DUTIES AND RESPONSIBILITIES</b></p> <p>RELIABILITY MANAGEMENT</p> <p> Develop and implement site reliability strategies for fixed plant assets.</p> <p> Lead Reliability Centered Maintenance (RCM) initiatives.</p> <p> Establish asset criticality assessments and maintenance tactics.</p> <p> Monitor reliability KPIs and drive improvement plans.</p> <p> Develop long-term asset replacement and lifecycle management strategies.</p> <p> Facilitate defect elimination programs.</p> <p> Establish reliability standards, procedures, and engineering best practices across the maintenance department. </p> <p> Facilitate regular reliability review meetings with Operations, Mechanical, and E&amp;I teams</p> <p>PERFORMANCE MONITORING</p> <p> Develop and maintain asset performance monitoring systems for critical plant equipment.</p> <p> Analyze equipment performance trends and identify opportunities to improve availability, reliability, and maintainability.</p> <p> Monitor and report key performance indicators (KPIs) including equipment availability, OEE, MTBF, MTTR, maintenance costs, and reliability improvement targets.</p> <p> Develop and maintain reliability dashboards and management reports.</p> <p> Conduct performance gap analysis and recommend corrective actions.</p> <p> Identify bad actors and recurring equipment failures through data analysis.</p> <p> Support condition monitoring technologies including vibration analysis, oil analysis, thermography, ultrasonic testing, and online monitoring systems.</p> <p> Collaborate with Operations, Mechanical, and E&amp;I teams to improve plant throughput and equipment performance.</p> <p> Benchmark maintenance and reliability performance against industry best practices.</p> <p> Drive data quality improvements within CMMS/ERP systems to support effective decision-making.</p> <p> Present performance reviews and reliability improvement initiatives to site leadership</p> <p>INSPECTION &amp; ASSET INTEGRITY</p> <p> Develop and manage inspection programs for critical equipment.</p> <p> Ensure statutory inspections are completed in accordance with regulatory requirements.</p> <p> Manage structural, piping, pressure equipment, tanks, chutes, and conveyor inspections.</p> <p> Coordinate non-destructive testing (NDT) activities.</p> <p> Monitor corrosion, wear, fatigue, and equipment degradation mechanisms.</p> <p> Maintain asset integrity records and inspection databases.</p> <p> Lead the development and implementation of the site's Asset Management Framework aligned with ISO 55000 principles. </p> <p> Maintain equipment criticality rankings and lifecycle management plans.</p> <p>RELIABILITY ENGINEERING</p> <p> Lead Corrective &amp; Preventive Actions (CAPA) and Root Cause Failure Analysis (RCFA) investigations.</p> <p> Conduct failure mode analysis and risk assessments.</p> <p> Review equipment performance trends.</p> <p> Drive predictive maintenance initiatives including </p> <p>o Vibration analysis</p> <p>o Thermography</p> <p>o Oil analysis</p> <p> Ultrasonic inspections</p> <p> Motor current analysis</p> <p> Identify bad actors and recurring equipment failures.</p> <p>ENGINEERING &amp; DESIGN</p> <p> Review and approve engineering modifications.</p> <p> Support plant improvement and debottlenecking projects.</p> <p> Act as the technical authority for engineering modifications and management of change (MOC) processes.</p> <p> Review OEM recommendations and approve engineering improvement opportunities.</p> <p> Ensure compliance with engineering standards and specifications.</p> <p> Coordinate design reviews and technical evaluations.</p> <p> Support capital project development and execution.</p> <p>COMMISSIONING &amp; PROJECTS</p> <p> Support equipment specification and technical evaluations.</p> <p> Participate in FAT (Factory Acceptance Testing) and SAT (Site Acceptance Testing).</p> <p> Support commissioning and plant performance testing.</p> <p> Validate maintenance strategies for new assets.</p> <p> Ensure operational readiness prior to handover.</p> <p>LEADERSHIP &amp; TEAM MANAGEMENT</p> <p> Lead reliability engineers, inspection personnel, and technical specialists.</p> <p> Develop technical competency programs.</p> <p> Mentor engineering and maintenance teams.</p> <p> Foster a culture of continuous improvement and technical excellence.</p> <p>SAFETY &amp; COMPLIANCE</p> <p> Ensure compliance with company safety standards.</p> <p> Support risk assessments and HAZOP studies.</p> <p> Participate in incident investigations.</p> <p> Ensure compliance with regulatory and asset integrity requirements.</p> <p> Promote safe work practices and a zero-harm culture.</p> <p>BUDGET &amp; RESOURCES MANAGEMENT</p> <p> Prepare and manage department budgets.</p> <p> Monitor spare parts inventory and optimize stock levels.</p> <p> Control maintenance expenditures while maintaining equipment reliability.</p> <p> Assist with procurement of equipment/spares and services.</p> <p> Manage and evaluate contractor performance. </p> <p> Ensure contractor compliance with safety and quality requirements. </p> <p> Review contractor scopes of work and service agreements along with other MMC teams.</p> <p>DATA ANALYTICS &amp; DIGITALIZATION</p> <p> Utilize CMMS, condition monitoring, and operational data to identify reliability improvement opportunities.</p> <p> Develop reliability dashboards and performance reporting tools.</p> <p> Support predictive and prescriptive maintenance initiatives through digital technologies and advanced analytics.</p> <p> </p> <p><br></p> <p> </p> <p> </p>