Laboratory Specialist Jobs - muscat Oman

<p><h4>Position description</h4> <p><strong>Reports to:</strong> Shift Team Lead OTTCO<br> <strong>Department:</strong> Maintenance & Operation Department<br> <strong>Location:</strong> Duqm & Ras Markaz</p> <h4>Job purpose</h4> <p>Performs safe, orderly and efficient panel control operations for flow regulations on reception, storage and expedition (pressure, flow, rate, reading, gauges, inspecting product) at assigned sites (Muscat / Ras Markaz / Duqm), under shift Operation Supervisor's scope, as individual contributor by:</p> <ul> <li>Controlling and regulating the pressure, flow and rate of the facility and correcting anomalies.</li> <li>Overseeing, reading, and maintaining the equipment that controls the pressure and flow of plant.</li> <li>Watching gauges, inspecting product, troubleshooting, record keeping.</li> <li>Preparing written documents for supervisors or safety inspectors to ensure products meet the required specification and contribute to regular and safest operations.</li> </ul> <p>The position will act in accordance with OTTCO's mission, vision, values and strategies, as well as policies, guidelines and international standards, supported by an IT technology platform, HSE standards, Omani government and other legal justifications, and best international practices in consonance with national objectives.</p> <h4>Reporting structure</h4> <p><strong>Number of staff supervised (direct reports):</strong> 0</p> <h4>Key responsibilities</h4> <p><strong>General:</strong></p> <ul> <li>Perform all CRO operation activities role in petrochemical terminal and hydrocarbons.</li> <li>Accept shift from previous shift panel operator with detailed log sheet of operational adjustments and changes during previous shift.</li> <li>Ensure continuity of operational issues handed over by the previous shift and take necessary action.</li> <li>Capture all major highlights and constraints experienced during the shift in the log sheet in detail for the following shift.</li> <li>Monitor unit's process performance on a continuous basis using the Distributed Control System (DCS).</li> <li>Diagnose abnormal situations and take corrective action from the control panel.</li> <li>Ensure equipment is operating within specified parameters and report serious operational deviations to the Shift Team Leader.</li> <li>Review and compare outside log sheet readings at regular intervals with the control room instrumentation readings and ensure they correlate.</li> <li>Review laboratory sample analysis results by referring to Laboratory Information Management System updates and make necessary adjustments of the control panel instruments.</li> <li>Ensure Shift Team Leader is fully informed on all related aspects and obtain guidance when necessary.</li> <li>Control operating plant start-ups, shutdowns, and emergencies by alterations of speed, temperature, pressure and flow rates as necessary.</li> <li>Facilitate the shutdown and start-up for turnaround, maintenance and inspection purposes with adherence to the Standard Operating Procedures (SOP).</li> <li>Implement emergency procedures as dictated by the circumstances and SOPs.</li> <li>Contribute to the integrity of the organisation structure through constructive feedback.</li> <li>Contribute to improving processes and procedures within the department in conjunction with Team Leader.</li> <li>Adhere to Standard Operating Procedures and instructions received from Shift Team Leader in coordination with the Field Operator.</li> <li>Maintain log sheets and logbooks reporting the highlights of daily shift work.</li> <li>Record safety incidents (near misses, observations, incidents).</li> <li>Provide input into the weekly or monthly reports if required by the Area Department.</li> <li>Maintain continuity of panel operation and close all critical issues scheduled for the allocated shift.</li> <li>Communicate and correct process quality problems.</li> <li>Participate in Process Safety Management (PSM) activities.</li> <li>Effectively interact with all levels of employees, clients and vendors.</li> <li>Support unit turnarounds including work list identification/justification, procedure writing, procedure review and equipment inspection.</li> <li>Troubleshoot process operations, communicate and correct process quality problems.</li> <li>Perform other related duties or assignments as directed.</li> <li>Familiarize with QHSE policies, objectives, procedures and its record maintenance.</li> <li>Maintain awareness of significant environmental aspects, health and safety hazards, related actual and potential aspects and risks associated with their risk.</li> <li>Maintain awareness of emergency preparedness and response measures.</li> <li>Maintain awareness of implications of not conforming to the integrated management system requirements, including not fulfilling the organization's compliance obligations.</li> </ul> <h4>Qualifications & experience</h4> <p><strong>Minimum qualifications:</strong> Diploma in Petrochemical or Oil / Gas or equivalent.</p> <p>Excellent knowledge of written, read, and spoken English (required). Arabic - native (desirable).</p> <p><strong>Experience and background:</strong></p> <ul> <li>5-7 years of experience in hydrocarbons refining, petrochemical, process engineering or related industry.</li> <li>Relevant experience in the Oil & Gas / Refinery / Petrochemical industry with experience in Jetty / Tank Farm / Gantry units.</li> <li>Knowledge of fuel sector equipment.</li> <li>Knowledge of the refinery's offsite facilities and procedures.</li> </ul> <p><strong>Skills:</strong></p> <ul> <li>Good functional knowledge of DCS.</li> <li>Good knowledge of relevant operations, HSE requirements, Oil/Gas process and systems procedures and practices.</li> <li>Ability to perform as a team player.</li> <li>Self-motivated and dependable, demonstrating strong initiative.</li> <li>Ability to deal with change and demonstrate flexibility as required.</li> </ul> <h4>Key interactions</h4> <p><strong>Internal:</strong> Department Managers, Operations Shift Staff, SCM, TSD, Maintenance, HSE, Fire</p> <p><strong>External:</strong> OQ, SIPC, Surveying Companies, ROP and Civil Defence, gas companies, other contractors and suppliers as required.</p> <h4>Notable working conditions</h4> <p>Field operations and office environment, moderate to intensive computer screen use.</p></p><p></p>

<p><h4>Location</h4> <p>Muscat, Oman</p> <h4>Start date</h4> <p>2026</p> <h4>Service status</h4> <p>Resident (5 days per week)</p> <h4>Estimated service duration</h4> <p>12 months (renewable)</p> <h4>Qualification and experience required</h4> <ul> <li>Extensive experience in LNG shipping operations, terminal management, vessel berthing, cargo handling, and compliance with maritime safety and environmental regulations.</li> <li>Knowledge of OCIMF SIRE/CDI vetting and SIGTTO best practices.</li> <li>Understanding of ISPS Code implementation and port security protocols.</li> <li>Experience in similar position: over 10 years, including 5 years as chief officer or master on LNG/LPG carriers or crude/clean oil carriers.</li> <li>Good knowledge in warehouse and lifting activities.</li> </ul> <h4>Service purpose</h4> <p>We are seeking a skilled and experienced marine specialist to join our dynamic team for the LNG bunkering project.</p> <p>In this key role, in close collaboration with the LNG team in Sohar, you will be a strategic member of the Muscat back office in charge of preparing and overseeing the safety, compliance, and efficiency of all marine operations.</p> <p>Your area of responsibilities will apply to LNG carriers loading, LNG bunkering operations, and, to a larger extent, all marine-related matters of the LNG bunkering project.</p> <p>Your skills and experience will also identify you as a potential temporary replacement of the marine superintendent in Sohar.</p> <p>Additionally, you would potentially be able to provide support to the Sohar team regarding logistics entities and warehouse activities, as this will be part of the Sohar marine superintendent's scope.</p> <p>The job holder is part of the company Muscat back office team and will report directly to the supply chain and marine manager.</p> <p>If interested, kindly apply.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for a talented graphic designer and photography enthusiast who will be responsible for applying the regional brand guidelines in order to create visually appealing designs for various communication channels. Your primary role will be to apply creative solutions to existing templates or design and create graphics relevant to the brief shared.</p><p>In order to do well in this role, we d want you to have a good understanding of design principles, have proficiency in Adobe Creative Suite, are experienced in food photography and are able to manage multiple projects simultaneously.</p><p>WHAT'S ON YOUR PLATE?</p><ul><li>Responsible for managing assigned creative tasks</li><li>Creating original artwork through usage of templates and propose improvements when/if needed</li><li>Designing digital content, motion graphics and video editing.</li><li>Ensure brand consistency through application of brand standards</li><li>Refine images, fonts and layouts provided by a local agency partner or the regional creative team</li><li>Ability to work independently with minimal supervision and within a collaborative team environment.</li><li>Detail-oriented. Be organized, effective and positive as you juggle multiple assignments with demanding deadlines.</li><li>attend photo sessions in order to take images of menu food items share photos with team for editing and uploading</li><li>Manage daily social media content posting and scheduling in coordination with the Social Media Specialist along with in-app communication.</li><li>Participate in brainstorming sessions for creative campaign ideas.</li><li>Stay updated on social media trends and industry developments.</li><li>Demonstrated expertise in creative and strategic content creation, along with excellent writing skills in two languages (English + Arabic).</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Good understanding of design principles</li><li>Proficiency in Adobe Creative Suite</li><li>Experienced in food photography</li><li>Ability to manage multiple projects simultaneously</li><li>Ability to work independently with minimal supervision and within a collaborative team environment.</li><li>Detail-oriented. Be organized, effective and positive as you juggle multiple assignments with demanding deadlines.</li><li>Demonstrated expertise in creative and strategic content creation, along with excellent writing skills in two languages (English + Arabic).</li></ul><p></p></section>

<p><h4>Position summary</h4> <p>Our spa specialists play an important role in support of a number of vital spa functions. At our hotels these associates work to build an experience that is memorable and unique – with spa services on the side. Our spa specialists take the initiative and deliver a wide range of services to make sure that guests enjoy their experience. Whether promoting spa services or retail, scheduling reservations and confirming appointments, providing answers about services, checking in guests, or processing payments, the spa specialist makes transactions feel like part of the experience.</p> <p>No matter what position you are in, there are a few things that are critical to success – creating a safe workplace, following company policies and procedures, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional. Spa specialists will be on their feet and moving around (stand, sit, or walk for an extended time; moving over sloping, uneven, or slippery surfaces), managing reservation software (read and visually verify information), and taking a hands-on approach to work (move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance and 25 pounds with assistance; reach overhead and below the knees, including bending, twisting, pulling, and stooping). Doing all these things well (and other reasonable job duties as requested) is critical for spa specialists – to get it right for our guests and our business each and every time.</p> <h4>Preferred qualifications</h4> <p><strong>Education:</strong> High school diploma or G.E.D. equivalent.</p> <p><strong>Related work experience:</strong> No related work experience.</p> <p><strong>Supervisory experience:</strong> No supervisory experience.</p> <p><strong>License or certification:</strong> None</p> <h4>Equal opportunity employer statement</h4> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <h4>About Marriott Hotels</h4> <p>Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels.</p> <p>In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p> <h4>About JW Marriott</h4> <p>JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J. Willard Marriott.</p> <p>Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates</p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Diagnose and manage a wide spectrum of adult diseases, from common ailments to complex chronic conditions, utilizing advanced diagnostic tools and clinical judgment.</li><li>Provide comprehensive primary and secondary care, acting as the first point of contact for patients and coordinating specialist referrals when necessary.</li><li>Develop and implement personalized treatment plans, incorporating evidence-based medicine and patient-centered care principles.</li><li>Conduct thorough physical examinations, interpret laboratory and imaging results, and order appropriate diagnostic tests.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Possess a recognized medical degree (MBBS or equivalent) followed by specialized training in Internal Medicine (MD/DNB/MRCP or equivalent).</li><li>Hold valid medical licenses and certifications required to practice in the relevant jurisdiction.</li><li>Demonstrate extensive experience in managing diverse adult patient populations within a hospital or clinic setting.</li><li>Exhibit exceptional diagnostic acumen and a systematic approach to problem-solving in complex clinical scenarios.</li></ul><p></p></section>

<p><h4>Position description</h4> <p><strong>Reports to:</strong> Shift Team Lead OTTCO<br> <strong>Department:</strong> Maintenance & Operation Department<br> <strong>Location:</strong> Duqm & Ras Markaz</p> <h4>Job purpose</h4> <p>Performs safe, orderly and efficient panel control operations for flow regulations on reception, storage and expedition (pressure, flow, rate, reading, gauges, inspecting product) at assigned sites (Muscat / Ras Markaz / Duqm), under shift Operation Supervisor's scope, as individual contributor by:</p> <ul> <li>Controlling and regulating the pressure, flow and rate of the facility and correcting anomalies.</li> <li>Overseeing, reading, and maintaining the equipment that controls the pressure and flow of plant.</li> <li>Watching gauges, inspecting product, troubleshooting, record keeping.</li> <li>Preparing written documents for supervisors or safety inspectors to ensure products meet the required specification and contribute to regular and safest operations.</li> </ul> <p>The position will act in accordance with OTTCO's mission, vision, values and strategies, as well as policies, guidelines and international standards, supported by an IT technology platform, HSE standards, Omani government and other legal justifications, and best international practices in consonance with national objectives.</p> <h4>Reporting structure</h4> <p><strong>Number of staff supervised (direct reports):</strong> 0</p> <h4>Key responsibilities</h4> <p><strong>General:</strong></p> <ul> <li>Perform all CRO operation activities role in petrochemical terminal and hydrocarbons.</li> <li>Accept shift from previous shift panel operator with detailed log sheet of operational adjustments and changes during previous shift.</li> <li>Ensure continuity of operational issues handed over by the previous shift and take necessary action.</li> <li>Capture all major highlights and constraints experienced during the shift in the log sheet in detail for the following shift.</li> <li>Monitor unit's process performance on a continuous basis using the Distributed Control System (DCS).</li> <li>Diagnose abnormal situations and take corrective action from the control panel.</li> <li>Ensure equipment is operating within specified parameters and report serious operational deviations to the Shift Team Leader.</li> <li>Review and compare outside log sheet readings at regular intervals with the control room instrumentation readings and ensure they correlate.</li> <li>Review laboratory sample analysis results by referring to Laboratory Information Management System updates and make necessary adjustments of the control panel instruments.</li> <li>Ensure Shift Team Leader is fully informed on all related aspects and obtain guidance when necessary.</li> <li>Control operating plant start-ups, shutdowns, and emergencies by alterations of speed, temperature, pressure and flow rates as necessary.</li> <li>Facilitate the shutdown and start-up for turnaround, maintenance and inspection purposes with adherence to the Standard Operating Procedures (SOP).</li> <li>Implement emergency procedures as dictated by the circumstances and SOPs.</li> <li>Contribute to the integrity of the organisation structure through constructive feedback.</li> <li>Contribute to improving processes and procedures within the department in conjunction with Team Leader.</li> <li>Adhere to Standard Operating Procedures and instructions received from Shift Team Leader in coordination with the Field Operator.</li> <li>Maintain log sheets and logbooks reporting the highlights of daily shift work.</li> <li>Record safety incidents (near misses, observations, incidents).</li> <li>Provide input into the weekly or monthly reports if required by the Area Department.</li> <li>Maintain continuity of panel operation and close all critical issues scheduled for the allocated shift.</li> <li>Communicate and correct process quality problems.</li> <li>Participate in Process Safety Management (PSM) activities.</li> <li>Effectively interact with all levels of employees, clients and vendors.</li> <li>Support unit turnarounds including work list identification/justification, procedure writing, procedure review and equipment inspection.</li> <li>Troubleshoot process operations, communicate and correct process quality problems.</li> <li>Perform other related duties or assignments as directed.</li> <li>Familiarize with QHSE policies, objectives, procedures and its record maintenance.</li> <li>Maintain awareness of significant environmental aspects, health and safety hazards, related actual and potential aspects and risks associated with their risk.</li> <li>Maintain awareness of emergency preparedness and response measures.</li> <li>Maintain awareness of implications of not conforming to the integrated management system requirements, including not fulfilling the organization's compliance obligations.</li> </ul> <h4>Qualifications & experience</h4> <p><strong>Minimum qualifications:</strong> Diploma in Petrochemical or Oil / Gas or equivalent.</p> <p>Excellent knowledge of written, read, and spoken English (required). Arabic - native (desirable).</p> <p><strong>Experience and background:</strong></p> <ul> <li>5-7 years of experience in hydrocarbons refining, petrochemical, process engineering or related industry.</li> <li>Relevant experience in the Oil & Gas / Refinery / Petrochemical industry with experience in Jetty / Tank Farm / Gantry units.</li> <li>Knowledge of fuel sector equipment.</li> <li>Knowledge of the refinery's offsite facilities and procedures.</li> </ul> <p><strong>Skills:</strong></p> <ul> <li>Good functional knowledge of DCS.</li> <li>Good knowledge of relevant operations, HSE requirements, Oil/Gas process and systems procedures and practices.</li> <li>Ability to perform as a team player.</li> <li>Self-motivated and dependable, demonstrating strong initiative.</li> <li>Ability to deal with change and demonstrate flexibility as required.</li> </ul> <h4>Key interactions</h4> <p><strong>Internal:</strong> Department Managers, Operations Shift Staff, SCM, TSD, Maintenance, HSE, Fire</p> <p><strong>External:</strong> OQ, SIPC, Surveying Companies, ROP and Civil Defence, gas companies, other contractors and suppliers as required.</p> <h4>Notable working conditions</h4> <p>Field operations and office environment, moderate to intensive computer screen use.</p></p><p></p>

<p>We are seeking an experienced Laboratory Manager to oversee laboratory operations within a poultry production environment. The role will be responsible for managing laboratory testing activities, ensuring compliance with quality and biosecurity standards, supporting disease surveillance and product quality programs, and maintaining accurate laboratory processes to support poultry health, food safety, and operational excellence.</p><p><strong>Key Responsibilities</strong></p><ul><li>Manage daily laboratory operations and ensure the timely execution of testing activities.</li><li>Oversee laboratory testing related to poultry health, product quality, and food safety.</li><li>Ensure compliance with laboratory quality standards, biosafety requirements, and regulatory guidelines.</li><li>Supervise laboratory personnel and allocate resources to support operational priorities.</li><li>Review and approve laboratory test results and technical reports.</li><li>Maintain laboratory equipment and ensure calibration, maintenance, and validation activities are performed.</li><li>Develop and maintain laboratory procedures, quality documentation, and standard operating procedures (SOPs).</li><li>Monitor laboratory performance indicators and implement continuous improvement initiatives.</li><li>Coordinate with production, hatchery, veterinary, and quality teams to support operational decision-making.</li><li>Prepare laboratory performance reports and provide recommendations to management regarding quality, compliance, and laboratory operations.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Key Requirements</strong></p><ul><li>Proven experience managing laboratory operations within the poultry industry .</li></ul><p><strong>Other Qualifications</strong></p><ul><li>Bachelor's degree in Veterinary Medicine, Microbiology, Animal Science, Poultry Science, Biotechnology, Food Science, Laboratory Sciences, or a related field.</li><li>Strong analytical and problem-solving skills.</li><li>Strong leadership and team management capabilities.</li><li>Effective communication and reporting skills.</li></ul>

<p><h4>Description</h4> <p>The opportunity</p> <p>A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. The platform is a greenfield central securities depository being built to go-live in 2027.</p> <p>We are hiring an Operations Lead to design the operational function from a blank sheet in Build, and then operate it in Run. Issuers, primary dealers, custodians, settlement banks, and investors will depend on this platform to do what it says it will do, on time, every time, without exception. The Operations Lead is the person accountable for making that happen day after day once the platform is live.</p> <p>Scope is all operational activity except controls. Reconciliations, regulatory reporting, client money compliance, and data governance sit with the Head of Operations Control. Everything else operational sits here.</p> <h4>What the role covers</h4> <ul> <li>Designing the operational function from a blank sheet: team structure, capability profile, operating procedures, runbooks, calendars, cut-offs, and escalation paths</li> <li>Owning the operational execution of settlement: trade input, matching, instruction processing, cash and securities movement, settlement finality, and exception management</li> <li>Owning the operational execution of registry maintenance: account opening, amendments, position management, and holding statements</li> <li>Owning end-to-end operational responsibility for asset servicing and corporate actions: notification, election capture, processing, distribution, and reconciliation back to issuers and participants</li> <li>Designing and operating the participant onboarding process; owning day-to-day participant services including enquiry handling, instruction support, and issue resolution</li> <li>Owning first-line operational risk identification, recording, mitigation, and escalation; operating the operational incident management process</li> <li>Owning operational relationships with custodians, settlement banks, the exchange, SWIFT, and paying agents</li> <li>Owning operational readiness for go-live: trained team, tested procedures, signed-off runbooks, and completed dress rehearsals</li> <li>Line managing the Operations Analyst, Corporate Actions Specialist, and the wider Operations team as it builds</li> </ul> <h4>Requirements</h4> <p>Who we are looking for</p> <ul> <li>At least 10 years in securities operations, custody operations, settlement operations, or financial market infrastructure operations. Direct, demonstrable experience operating securities settlement and registry processes at scale: this is non-negotiable.</li> <li>Direct, hands-on experience of corporate actions operations across a range of event types.</li> <li>Demonstrated experience designing or significantly redesigning an operational function, including procedures, runbooks, team structure, and training, rather than only operating one inherited from elsewhere.</li> <li>Track record of operating under regulatory expectations for an FMI or a securities-services business.</li> <li>Experience managing operational relationships with custodians, settlement banks, and exchange or CSD counterparties.</li> <li>Fluent in English.</li> <li>Direct experience in a CSD, ICSD, or custody bank is a strong advantage. So is experience operating SWIFT-based settlement messaging and familiarity with Islamic-finance instrument operations.</li> </ul> <h4>What this is</h4> <p>The operational function does not exist yet. The procedures have not been written, the runbooks have not been drafted, and the team has not been built. The person who takes this role will have done all of it. If you have the settlement and registry operations background to design this from first principles and the leadership to run it to a regulated FMI standard, this is worth a conversation.</p></p><p></p>

<p><h4>Description</h4> <p>The opportunity</p> <p>A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. The platform is a greenfield central securities depository being built to go-live in 2027.</p> <p>We are hiring an Operations Lead to design the operational function from a blank sheet in Build, and then operate it in Run. Issuers, primary dealers, custodians, settlement banks, and investors will depend on this platform to do what it says it will do, on time, every time, without exception. The Operations Lead is the person accountable for making that happen day after day once the platform is live.</p> <p>Scope is all operational activity except controls. Reconciliations, regulatory reporting, client money compliance, and data governance sit with the Head of Operations Control. Everything else operational sits here.</p> <h4>What the role covers</h4> <ul> <li>Designing the operational function from a blank sheet: team structure, capability profile, operating procedures, runbooks, calendars, cut-offs, and escalation paths</li> <li>Owning the operational execution of settlement: trade input, matching, instruction processing, cash and securities movement, settlement finality, and exception management</li> <li>Owning the operational execution of registry maintenance: account opening, amendments, position management, and holding statements</li> <li>Owning end-to-end operational responsibility for asset servicing and corporate actions: notification, election capture, processing, distribution, and reconciliation back to issuers and participants</li> <li>Designing and operating the participant onboarding process; owning day-to-day participant services including enquiry handling, instruction support, and issue resolution</li> <li>Owning first-line operational risk identification, recording, mitigation, and escalation; operating the operational incident management process</li> <li>Owning operational relationships with custodians, settlement banks, the exchange, SWIFT, and paying agents</li> <li>Owning operational readiness for go-live: trained team, tested procedures, signed-off runbooks, and completed dress rehearsals</li> <li>Line managing the Operations Analyst, Corporate Actions Specialist, and the wider Operations team as it builds</li> </ul> <h4>Requirements</h4> <p>Who we are looking for</p> <ul> <li>At least 10 years in securities operations, custody operations, settlement operations, or financial market infrastructure operations. Direct, demonstrable experience operating securities settlement and registry processes at scale: this is non-negotiable.</li> <li>Direct, hands-on experience of corporate actions operations across a range of event types.</li> <li>Demonstrated experience designing or significantly redesigning an operational function, including procedures, runbooks, team structure, and training, rather than only operating one inherited from elsewhere.</li> <li>Track record of operating under regulatory expectations for an FMI or a securities-services business.</li> <li>Experience managing operational relationships with custodians, settlement banks, and exchange or CSD counterparties.</li> <li>Fluent in English.</li> <li>Direct experience in a CSD, ICSD, or custody bank is a strong advantage. So is experience operating SWIFT-based settlement messaging and familiarity with Islamic-finance instrument operations.</li> </ul> <h4>What this is</h4> <p>The operational function does not exist yet. The procedures have not been written, the runbooks have not been drafted, and the team has not been built. The person who takes this role will have done all of it. If you have the settlement and registry operations background to design this from first principles and the leadership to run it to a regulated FMI standard, this is worth a conversation.</p></p><p></p>

<p><strong>JOB PURPOSE:</strong> To support the Quality Control Microbiology section in safeguarding the sterility, safety, and quality of pharmaceutical products by performing entry-level microbiological testing, sampling, and environmental monitoring under supervision. The role assists with media preparation, laboratory equipment use, and accurate documentation in compliance with GMP, GLP, approved SOPs, and data integrity requirements, while building the technical foundation and competencies required to progress within the microbiology function.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><p><strong>Microbiological Testing Support</strong></p><ul><li>Prepare culture media, reagents, glassware, and laboratory materials for microbiological analysis as per approved SOPs.</li><li>Perform or assist in routine microbial limit testing, including TAMC, TYMC, and specified pathogen testing, after required training and authorization.</li><li>Support testing of raw materials, packaging materials, in-process samples, finished products, stability samples, and hold-time samples as assigned.</li><li>Assist in growth promotion testing, preservative efficacy testing, and microbiological method-related activities under supervision when required.</li><li>Assist in sterility testing and endotoxin (LAL) testing activities under direct supervision, after required training and authorization.</li><li>Support basic microbial identification activities, including Gram staining and colony observation, under the guidance of senior laboratory staff.</li></ul><p><strong>Sampling, Water Testing and Environmental Monitoring</strong></p><ul><li>Collect, label, handle, and transfer microbiology samples in line with approved sampling and contamination-control procedures.</li><li>Support environmental monitoring in production areas and the microbiology laboratory using settle plates, air sampling, and surface monitoring methods.</li><li>Assist in microbiological testing of water and utility samples and record results accurately for review.</li><li>Support preparation of basic water and environmental monitoring trend summaries as directed by the supervisor.</li></ul><p><strong>Laboratory Equipment and Culture Handling</strong></p><ul><li>Use basic microbiology laboratory equipment such as autoclaves, laminar airflow units, incubators, balances, and refrigerators after training and authorization.</li><li>Perform routine equipment status checks, cleaning, and logbook entries, and report abnormalities or out-of-calibration status immediately.</li><li>Support media incubation, sample incubation, culture handling, and culture maintenance activities under supervision with proper labeling and traceability.</li></ul><p><strong>Documentation and Data Integrity</strong></p><ul><li>Complete worksheets, logbooks, labels, and laboratory records clearly, accurately, and on time in accordance with GDP and data integrity requirements.</li><li>Prepare basic microbiology test reports and submit results for review and approval by the authorized reviewer.</li><li>Maintain microbiology files, reports, and controlled documents in an organized and retrievable manner to support audit readiness.</li></ul><p><strong>Compliance, Safety and Continuous Improvement</strong></p><ul><li>Follow approved SOPs, GMP, GLP, biosafety, hygiene, PPE, and contamination-control requirements at all times.</li><li>Maintain laboratory cleanliness and support proper disposal of biological and laboratory waste according to company procedures.</li><li>Report deviations, abnormal results, contamination concerns, unsafe conditions, or incidents immediately to the supervisor.</li><li>Participate in training and competency development activities to build microbiology testing capability and compliance awareness.</li></ul><p><strong>Other Duties</strong></p><ul><li>Perform any other duties within the scope and level of the position, as assigned by the Line Manager, Supervisor, Department Head, or Management, in line with operational and business requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>QUALIFICATIONS, EXPERIENCE &amp; SKILLS:</strong></p><p><strong>Qualifications</strong></p><ul><li>Bachelor s degree in Microbiology, Biotechnology, Biochemistry, Biology, Pharmaceutical Sciences, or an equivalent relevant field.</li></ul><p><strong>Experience</strong></p><ul><li>Fresh graduate or 0 1 year of exposure to microbiology, pharmaceutical quality control, or laboratory work.</li><li>Academic projects, internship experience, or laboratory training related to microbiological testing, aseptic handling, sample preparation, or GMP/GLP documentation is an advantage.</li></ul><p><strong>Technical Competencies</strong></p><ul><li>Pharmaceutical Microbiology Testing</li><li>Aseptic Handling Practices</li><li>Sample Receipt, Labelling &amp; Traceability</li><li>Culture Media Preparation &amp; Sterilization Support</li><li>Environmental Monitoring Support</li><li>Water Testing Support</li><li>Microbial Limit Testing Support</li><li>Sterility &amp; Endotoxin (LAL) Testing Support</li><li>Laboratory Records &amp; Logbook Control</li><li>SOP, GMP &amp; GLP Awareness</li><li>Data Integrity Awareness</li><li>Microbiology Equipment Readiness</li><li>Biosafety &amp; Microbiological Waste Handling</li><li>Basic Microbial Identification &amp; Gram Staining Support</li></ul><p><strong>Behavioural Competencies</strong></p><ul><li>Attention to detail &amp; accuracy</li><li>Quality Focus</li><li>Ownership, accountability &amp; initiative</li><li>Willingness to Learn</li><li>Collaboration &amp; teamwork</li><li>Clear communication</li><li>Planning, prioritization &amp; time management</li><li>Integrity, confidentiality &amp; ethics</li><li>Safety Awareness</li></ul>

<p><h4>Service delivery coordinator</h4> <p>Do you enjoy leading a team that provides a high-quality service for our customers?<br> Do you love collaborating with teams to solve complex problems?</p> <h4>Join our team</h4> <p>Baker Hughes is the first and only comprehensive provider of digital oilfield products, services and solutions. Drawing inspiration from its rich heritage as an inventor company, Baker Hughes harnesses the passion and expertise of its people to improve productivity throughout the entire oil and gas value chain.</p> <h4>Partner with the best</h4> <p>As the service coordinator, you will ensure flawless execution, on-time delivery and contract adherence. You will ensure that Baker Hughes maximizes its short and long term revenue and profit opportunities. You will coordinate job activities to ensure execution in line with customer expectations and contract terms and conditions.</p> <h4>As a service delivery coordinator, you will be responsible for:</h4> <ul> <li>Protecting the health and safety of our personnel and the environment.</li> <li>Conducting all activities in line with our non-negotiables, applicable processes and cultural pillars.</li> <li>Ensuring the assigned contracts/quotes are fully understood and capitalized upon.</li> <li>Coordinating and monitoring all job activities as outlined in MTJC across organizational boundaries.</li> <li>Acting as primary contact for client for job preparation, execution and close out.</li> <li>Being responsible for scheduling and dispatching of resources in line with job requirements.</li> <li>Being familiar with the assigned client’s process for MOC / escalation to ensure the proper process is followed when there is risk of not achieving the client’s objectives (examples: clients asking for Baker Hughes to operate outside of product specifications, client asking Baker Hughes to execute work in a way that is not aligned with the Baker Hughes SOP).</li> <li>Prompting escalation of issues that can impact service delivery.</li> <li>Ensuring invoice is in line with contract/quote, with no revenue leakage and timely collection of cash.</li> <li>Complying with job center and S&OP platforms.</li> </ul> <h4>Fuel your passion</h4> <p>To be successful in this role you will:</p> <ul> <li>Have a bachelor's degree in engineering.</li> <li>Have 10 years of experience in drilling services.</li> <li>Have previous experience as an applications engineer for 4+ years.</li> <li>Have technical knowledge and engineering understanding towards drilling services.</li> <li>Be able to work in a team.</li> <li>Be able to demonstrate leadership skills.</li> <li>Demonstrate intermediate / advanced English.</li> </ul> <h4>Work in a way that works for you</h4> <p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:</p> <ul> <li>Office worker</li> </ul> <h4>Working with us</h4> <p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.</p> <h4>Working for you</h4> <p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p> <ul> <li>Contemporary work-life balance policies and wellbeing activities.</li> <li>Comprehensive private medical care options.</li> <li>Safety net of life insurance and programs.</li> <li>Tailored financial programs.</li> <li>Additional elected or voluntary benefits.</li> </ul> <p>The Baker Hughes internal title for this role is: Services Senior Specialist - Service Delivery Coordination.</p> <h4>About us</h4> <p>We are an energy technology company that provides solutions to energy and industrial customers worldwide. Built on a century of experience and conducting business in over 120 countries, our innovative technologies and services are taking energy forward – making it safer, cleaner and more efficient for</p><p></p>

<p><h4>Service delivery coordinator</h4> <p>Do you enjoy leading a team that provides a high-quality service for our customers?<br> Do you love collaborating with teams to solve complex problems?</p> <h4>Join our team</h4> <p>Baker Hughes is the first and only comprehensive provider of digital oilfield products, services and solutions. Drawing inspiration from its rich heritage as an inventor company, Baker Hughes harnesses the passion and expertise of its people to improve productivity throughout the entire oil and gas value chain.</p> <h4>Partner with the best</h4> <p>As the service coordinator, you will ensure flawless execution, on-time delivery and contract adherence. You will ensure that Baker Hughes maximizes its short and long term revenue and profit opportunities. You will coordinate job activities to ensure execution in line with customer expectations and contract terms and conditions.</p> <h4>As a service delivery coordinator, you will be responsible for:</h4> <ul> <li>Protecting the health and safety of our personnel and the environment.</li> <li>Conducting all activities in line with our non-negotiables, applicable processes and cultural pillars.</li> <li>Ensuring the assigned contracts/quotes are fully understood and capitalized upon.</li> <li>Coordinating and monitoring all job activities as outlined in MTJC across organizational boundaries.</li> <li>Acting as primary contact for client for job preparation, execution and close out.</li> <li>Being responsible for scheduling and dispatching of resources in line with job requirements.</li> <li>Being familiar with the assigned client’s process for MOC / escalation to ensure the proper process is followed when there is risk of not achieving the client’s objectives (examples: clients asking for Baker Hughes to operate outside of product specifications, client asking Baker Hughes to execute work in a way that is not aligned with the Baker Hughes SOP).</li> <li>Prompting escalation of issues that can impact service delivery.</li> <li>Ensuring invoice is in line with contract/quote, with no revenue leakage and timely collection of cash.</li> <li>Complying with job center and S&OP platforms.</li> </ul> <h4>Fuel your passion</h4> <p>To be successful in this role you will:</p> <ul> <li>Have a bachelor's degree in engineering.</li> <li>Have 10 years of experience in drilling services.</li> <li>Have previous experience as an applications engineer for 4+ years.</li> <li>Have technical knowledge and engineering understanding towards drilling services.</li> <li>Be able to work in a team.</li> <li>Be able to demonstrate leadership skills.</li> <li>Demonstrate intermediate / advanced English.</li> </ul> <h4>Work in a way that works for you</h4> <p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:</p> <ul> <li>Office worker</li> </ul> <h4>Working with us</h4> <p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.</p> <h4>Working for you</h4> <p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p> <ul> <li>Contemporary work-life balance policies and wellbeing activities.</li> <li>Comprehensive private medical care options.</li> <li>Safety net of life insurance and programs.</li> <li>Tailored financial programs.</li> <li>Additional elected or voluntary benefits.</li> </ul> <p>The Baker Hughes internal title for this role is: Services Senior Specialist - Service Delivery Coordination.</p> <h4>About us</h4> <p>We are an energy technology company that provides solutions to energy and industrial customers worldwide. Built on a century of experience and conducting business in over 120 countries, our innovative technologies and services are taking energy forward – making it safer, cleaner and more efficient for</p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Quality Controller will be responsible for establishing and maintaining the company’s quality assurance program across all farm and processing operations. This role ensures that all products meet regulatory, organic certification, and internal quality standards. The position involves developing and maintaining quality assurance systems, conducting internal audits, managing compliance, training staff, and driving a culture of continuous improvement</p><ul><li><p>Quality Assurance Program Development</p></li><li><p>Food Safety, Laboratory Services and Laboratory development</p></li><li><p>Training and Development</p></li><li><p>Regulatory Compliance</p></li><li><p>Data Management and Reporting</p></li><li><p>Problem Solving and Corrective Action</p></li><li><p>Supplier Quality Management</p></li><li><p>Continuous Improvement</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Food Science, Agriculture, Quality Assurance, or a related field; Master’s degree or certifications (HACCP, ISO 9001) preferred.</p></li><li><p>Minimum 10 years of experience managing and developing quality assurance programs in the food industry, preferably in dairy or organic processing.</p></li><li><p>Strong knowledge of food safety regulations, organic certification processes, and QA/QC methodologies.</p></li><li><p>Proven experience establishing food safety laboratories and conducting microbiological testing.</p></li><li><p>Experience working with EU and/or USDA regulatory frameworks.</p></li><li><p>Demonstrated success in taking products from R&amp;D to market.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Department of Mathematics and Computer Science at Modern College of Business and Science (MCBS) invites applications for a full-time faculty position in Physics. The successful candidate will teach physics courses, conduct scholarly and applied research, support student learning, and contribute to quality assurance, accreditation, curriculum development, and community engagement activities. Core Teaching Areas May Include General Physics; Mechanics; Electricity and Magnetism; Thermodynamics; Waves and Optics; Modern Physics; Applied Physics; Computational Physics and Emerging Applications Key Responsibilities Teach undergraduate physics courses in face-to-face, online, and blended learning modes. Develop course syllabi, laboratory manuals, digital learning materials, assessment tools, rubrics, and course files aligned with learning outcomes. Integrate modern teaching methodologies, simulations, laboratory technologies, and real-world applications into classroom instruction. Conduct research and publish in peer-reviewed journals; contribute to research projects, grants, consultancy, and community engagement activities. Advise and mentor students, supervise projects, and support academic and career development initiatives. Participate in curriculum review, program assessment, accreditation activities, and Continuous Quality Improvement (CQI) processes. Contribute to departmental committees, outreach activities, and institutional service initiatives. Quality Assurance and Accreditation Contributions: Participate in quality assurance, assessment, and continuous improvement activities of the program and department. Support curriculum review, program enhancement, and accreditation-related initiatives. Contribute to departmental committees and activities that support academic quality and institutional effectiveness The successful candidate is expected to maintain academic and professional currency, contribute to teaching excellence, research productivity, student success, quality assurance initiatives, and the continuous enhancement of the Department.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Required Qualifications Assistant Professor: PhD in Physics, Applied Physics or Computational Physics from a recognized university. Lecturer: Master s degree in Physics, Applied Physics or Computational Physics from a recognized university (Omanis preferred) Essential Requirements Evidence of effective teaching physics at the university level. Ability to teach physics laboratory and theory courses. Experience in online and hybrid teaching using modern educational technologies. Strong communication and interpersonal skills. Experience in student advising and mentoring. Preferred Qualifications and Experience Research expertise in areas Physics, Applied Physics or Computational Physics. Experience with laboratory management and experimental research. Professional certifications or industry experience relevant to physics applications. Experience with curriculum development, program assessment, and accreditation processes.</p><p></p></section>

<div><br></div><div><br></div><p><strong>Business Development Manager</strong></p> <p>Would you like to be part of the most international company in the world? A company operating in more than 220 countries worldwide and has been pioneering cross-border express shipping since 1969.  Would you like to be part of a business that connects people across the globe and want to make a difference? Then waste no time and join our amazing team at DHL Group. DHL Global Forwarding, Freight (DGFF) is the Group's air, ocean, and road freight specialist. We offer standardized transport as well as highly specialized end-to-end solutions to customers in a wide range of industries globally.</p> <p><em>Who moves mountains even across oceans? You do.</em> <strong>DHL Global Forwarding</strong> has an opening for a Business Development Manager<strong> in</strong><strong> Muscat, Oman</strong><strong>. </strong></p>   <p>Develop and administer field sales plans and processes to achieve revenue growth, enhance customer retention and acquisition, and increase lead conversion for a defined geographic region, product line or market segment in line with business strategy, financial objectives, Group guidelines and policies</p>   <p>Join us in connecting people and improving lives!</p>   <p><strong>In this Experienced Business Support Field Sales position </strong></p> <ul> <li>Under supervision support field sales plans and processes to achieve revenue growth, enhance customer retention and acquisition, and increase lead conversion for a defined geographic region, product line or market segment</li> <li>Comply with established procedures to implement field sales activities for increased and profitable sales on new and existing accounts</li> <li>Classify basic information for sales presentations, bids, etc., provide product/ service information and follow up on quotes to close business with the prospect</li> <li>Follow up with relevant local management to coordinate customer requests and products/ services that are being promoted</li> <li>Assist in reporting inside sales, and provide information on competitors and suppliers to product management</li> <li>Comply with established procedures, instructions and processes without making changes to them</li> </ul><div><div ><p><strong><span >business Development</span></strong></p><ul > <li><span >Identify and acquire new customers through prospecting, networking, and market research.</span></li> <li><span >Generate and qualify sales leads to build a strong sales pipeline.</span></li> <li><span >Conduct customer visits, presentations, and solution-selling discussions.</span></li> <li><span >Achieve agreed revenue, volume, and gross profit targets.</span></li> </ul><p><strong><span >Account Management</span></strong></p><ul > <li><span >Maintain and develop relationships with prospective and existing customers.</span></li> <li><span >Understand customer business needs and identify opportunities for cross-selling and upselling.</span></li> <li><span >Ensure high levels of customer satisfaction and retention.</span></li> <li><span >Conduct regular business reviews with assigned customers.</span></li> </ul></div><br></div>   <p><strong>Now, here is what we need from you! </strong></p> <table> <tbody> <tr> <td> <p><strong>Education Level</strong></p> </td> </tr> <tr> <td> <p> Vocational/Specialized/Technical/Certification</p> </td> </tr> <tr> <td> <p><strong>Experience Level</strong></p> </td> </tr> <tr> <td> <p> less than 2 years</p> </td> </tr> </tbody> </table>       <p><strong>We offer:</strong></p> <ul> <li>Opportunities in a global company where you can contribute your ideas and skills to move towards our shared goals.</li> <li>Possible further career development</li> <li>Competitive salary</li> </ul> <p><strong>Why join DHL Global Forwarding?</strong></p>   <p>We are part of Deutsche Post DHL, the world’s leading logistics provider with operations in over 220 countries. Visit our career site on the web at <a href="https://www.logistics.dhl/us-en/home/careers.html">https://www.logistics.dhl/us-en/home/careers.html</a></p>   <p>Our <strong>TOP EMPLOYER prestigious certification</strong> attests to our best-in-class efforts to attract and retain talent by fostering a positive work environment and encouraging personal and professional development among employees. The development of talented women in our organization will be a focus for us and an important part of our DGF Strategy 2025. </p>   <p>We aspire to become the undisputed leader in our industry, <strong>when people think of forwarding; we want them to think DGF </strong>because we have:</p>   <ul> <li>The<strong> largest global network</strong> with more than 30,000 passionate employees</li> <li>The most <strong>efficient processes</strong> and <strong>fastest response times</strong></li> <li>The <strong>best solutions</strong> and <strong>best customer service</strong></li> </ul>   <p><strong>Our Vision: </strong>The Logistics Company for the World.</p> <p><strong>Our Mission: </strong>Excellence. Simply Delivered.<br> <strong>Our Purpose: </strong>Connecting People, improving lives.<br> <strong>Our Values: </strong>Respect & Results<br> <strong>Our Goals: </strong>Employer, Provider, and Investment of Choice, Living Responsibility</p>   <p><em>DHL Global Forwarding is an equal opportunity employer.  We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. </em></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Process Manager is a key life-of-asset leadership role responsible for the process plant across the late execution phase, commissioning, ramp-up, and full steady-state operations of a copper and gold processing project. The role encompasses metallurgical performance, process plant operations, operational stability and continuous improvement, laboratory systems including both metallurgical laboratory and outsourced analytical laboratory services, and process plant technical governance, as well as integration with water systems, concentrate handling, and associated process infrastructure. The incumbent is a highly experienced mining industry professional capable of leading a copper-gold processing plant through late-stage project execution, commissioning, ramp-up, and into stable operations. The role requires strong background in metallurgical engineering, process plant optimization, equipment and system understanding, commissioning execution, and steady-state operations of mineral processing facilities, preferably within base metals and gold. The incumbent ensures that metallurgical and process practices are safe, technically sound, and aligned with company values, while developing technical capability within the team and delivering measurable improvements in recovery, plant stability, and cost efficiency. The role also requires strong capability to work effectively within multicultural, multidisciplinary teams and to communicate clearly across stakeholders.</p><p>Operational:</p><ul><li>Lead the processing department, promoting a culture of safety, operational excellence, and continuous improvement.</li><li>Provide overall technical and operational leadership for the process plant across late-stage project execution, commissioning, ramp-up, and steady-state operations, ensuring continuity from construction completion to stable long-term production.</li><li>Ensure metallurgical performance targets are achieved and sustained, including recovery, throughput, concentrate quality, reagent consumption, and overall process stability.</li><li>Lead process plant operational readiness activities, ensuring all systems, procedures, operating philosophies, documentation, and training programs are fully developed, validated, and implemented prior to start-up.</li><li>Oversee commissioning activities, including pre-commissioning, dry and wet commissioning, and first ore processing, ensuring safe, controlled, and efficient plant start-up and ramp-up.</li><li>Develop and implement operating strategies, control philosophies, and standard operating procedures to ensure safe, stable, and efficient plant operations.</li><li>Manage the transition from project execution to operational ownership, ensuring effective handover of systems, documentation, spares, and operational responsibilities.</li><li>Oversee metallurgical accounting, process monitoring, and plant performance reporting to ensure accurate and reliable operational decision-making.</li><li>Manage metallurgical laboratory operations and outsourced analytical laboratory services, ensuring data quality, QA/QC compliance, turnaround performance, and integration into process control and optimization.</li><li>Drive continuous improvement initiatives focused on metallurgical performance, plant stability, energy efficiency, reagent optimization, and cost reduction.</li><li>Ensure effective integration between process operations, mining feed variability, maintenance activities, and production planning to optimize overall asset performance.</li><li>Act as the technical authority for process-related matters, including engineering change review, troubleshooting, and resolution of operational issues.</li><li>Lead and develop technical capability within the process and metallurgical team, ensuring strong operational competence and performance culture.</li><li>Support long-term asset performance by ensuring the plant is operated within design parameters while identifying and implementing debottlenecking and optimization opportunities.</li><li>Maintain strong and structured reporting of plant performance, including daily, weekly, and monthly production, metallurgical, and cost performance KPIs to support operational decision-making and management visibility.</li><li>Foster strong working relationships with the Mining and Maintenance departments to ensure alignment on ore supply, plant availability, maintenance planning, and overall production objectives, ensuring integrated and efficient site-wide performance.</li><li>Promote in-country value by actively developing, training, and mentoring local talent, ensuring progressive capability transfer and the development of a strong national workforce within the process and metallurgical teams.</li></ul><p>Health, Safety, and Environment (HSE):</p><ul><li>Ensure all metallurgical and process operations are conducted in full compliance with applicable health, safety, and environmental standards, policies, and regulations.</li><li>Promote and embed a strong process safety culture across all operational, commissioning, and technical activities.</li><li>Participate in hazard studies, risk assessments, and process safety reviews (including HAZOPs), ensuring all actions are properly closed and implemented.</li><li>Ensure safe commissioning and start-up practices, including proper isolation, permit-to-work systems, and control of high-risk activities.</li><li>Ensure process plant operations comply with environmental requirements, including water balance management, tailings handling, and effluent quality control.</li><li>Support incident investigations related to process safety, metallurgical operations, and plant performance, ensuring root cause identification and effective corrective actions.</li><li>Ensure safe operating envelopes are defined, communicated, and respected across all process systems and operating conditions.</li><li>Foster a strong safety culture within the process and metallurgical teams, promoting proactive risk identification and continuous improvement in safety performance.</li></ul></div></section>

<p><strong>Role Objective:</strong> Sample analysis and LIMS data entry and analysis.</p><p><strong>Duties and Responsibilities:</strong></p><ul><li>Receiving sample in the chemistry department and allocate it to analyst in LIMS</li><li>Collect the results work sheet and enter in the LIMS on daily basis</li><li>Arranging sample in the sample room before and after analysis</li><li>Retrieve sample from sample room and arrange analysis as and when required.</li><li>Disposal of sample on timely basis as per plan on regular interval.</li><li>Sample analysis for composition and nutritional analytes.</li><li>Sample analysis for physical, sensory and shelf-life studies.</li><li>Sample analysis for effect of storage conditions on composition and nutritional analytes.</li><li>Analysis of samples for contaminants and packaging material residues.</li><li>Any other new analysis planned by laboratory and management.</li><li>Market sample analysis as per customers or GSO requirements</li><li>Record keeping of all the analysis and entering data in LIMS.</li><li>Up to date with scientific and technical developments</li><li>Method development (as per standards) for the above-mentioned analysis.</li><li>Working collaboratively in cross-functional teams</li><li>Being aware of, and keeping up to date with, health and safety issues.</li><li>Validating methods and calibration of equipment.</li><li>Implementation of good laboratory practices</li><li>Calibration and performance of lab equipment s/Balances</li><li>Variable responsibilities are contingent on workload vis a vis primary responsibilities and Company needs.</li><li>Ready to work overtime, weekends, shifts and during holidays.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>QUALIFICATION &amp; SKILLS GUIDELINES</h2><ol><li><strong>Education:</strong> (Minimum) Diploma in food technology/ Food Science/Chemistry/Applied chemistry/Science.</li><li><strong>Experience:</strong> (Years and nature of experience) 0-3 Years of Experience Some Experience from Food and water testing Laboratory is desirable.</li><li><strong>Special Skills &amp; Knowledge:</strong><ul><li>Computer literate and having IT skills related to configuration of software program LIMS.</li><li>Good knowledge of type of foods and its storage requirements.</li><li>Knowledge of inventory management.</li><li>Hands on lab analysis experience from relevant field.</li><li>Hands on experience on advance lab equipment.</li><li>Strong food chemistry knowledge and background.</li><li>Knowledge on GLP.</li><li>Knowledge of Microbiological Analysis.</li><li>Knowledge of ISO 17025.</li><li>Knowledge of calibration, methods validation and uncertainty measurement</li><li>Solid track record with an analytical lab &amp; troubleshooting analytical equipment.</li><li>Proven knowledge of quality systems, analytical lab equipment validation</li><li>Strong communicator</li><li>Ideally a strong background within a regulated lab function ideally within food,</li><li>Knowledge Occupational hazards and safety precautions necessary in the workplace.</li><li>Data management and reporting.</li><li>Computer literacy</li><li>Statistical techniques</li></ul></li></ol>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Plan, prepare, and deliver high-quality Physics lessons aligned with the school's curriculum. Develop lesson plans that meet curriculum objectives and address students' learning needs. Conduct laboratory experiments and practical activities while ensuring compliance with health and safety regulations. Assess, monitor, and evaluate students' academic progress using a variety of assessment methods. Prepare and mark assignments, quizzes, tests, and examinations. Maintain accurate student records and provide timely academic reports. Foster a positive, engaging, and inclusive learning environment. Participate in school meetings, professional development activities, and extracurricular programs. Communicate effectively with parents regarding students' academic progress and well-being. Comply with all school policies, procedures, and safeguarding requirements.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Academic Qualifications</h2><p>Bachelor's degree in Physics, Applied Physics, or a closely related field. A recognized teaching qualification, such as a Bachelor of Education (B.Ed.), PGCE, Postgraduate Diploma in Education, or an equivalent teaching certification. A Master's degree in Physics or Education is an advantage.</p><h2>Experience</h2><p>Minimum of 2 years of teaching experience in Physics. Experience teaching the Cambridge IGCSE and AS/A Level curriculum or another recognized international curriculum is preferred. Experience preparing students for external examinations.</p><h2>Required Skills</h2><ul><li>Excellent English communication skills, both written and spoken.</li><li>Strong classroom management skills.</li><li>Excellent planning, organization, and time management skills.</li><li>Ability to explain scientific concepts clearly and inspire student learning.</li><li>Competence in conducting laboratory experiments safely and effectively.</li><li>Proficiency in Microsoft Office, Google Workspace, and educational technology platforms.</li><li>Strong analytical, problem-solving, and critical-thinking skills.</li><li>Ability to work collaboratively within a multicultural school environment.</li></ul><h2>Preferred Skills</h2><ul><li>Familiarity with the Cambridge Assessment International Education curriculum.</li><li>Ability to teach IGCSE and AS/A Level Physics.</li><li>Experience using Learning Management Systems (LMS), such as Google Classroom or Microsoft Teams.</li><li>Knowledge of inquiry-based and student-centered teaching methodologies.</li></ul><h2>Preferred Certifications</h2><ul><li>Valid teaching license (where applicable).</li><li>Safeguarding and Child Protection training.</li><li>Professional development certificates related to Physics education or educational technology.</li></ul><p></p></section>

<p>This is a teaching and research focused position to manage and support delivery of undergraduate and postgraduate programmes in Chemical Engineering. Applicants should demonstrate excellence in teaching and research. Preference will be given to candidates with industry experience and administrative experience. The successful candidate is expected to:</p><p>Teach Modules: Deliver modules at both undergraduate and postgraduate levels in core Chemical Engineering areas including Process Design, Separation Processes, Reaction Engineering, Thermodynamics, Fluid and Heat Transfer, and Process Simulation. The normal teaching load is 3-4 modules per semester (2 semesters per academic year).</p><p>Supervise Projects: Oversee undergraduate and postgraduate projects, design projects (including the major Advanced Process Design project), and dissertations, ensuring students receive guidance on their research methodologies, design practice, and technical outcomes.</p><p>Engage in Research: Actively participate in scholarly research activities that lead to publications in refereed, indexed, and ranked international journals within the field of Chemical Engineering and related areas.</p><p>Collaborate for Grants: Initiate and develop research collaborations that result in successful research grant applications, enhancing the department's funding and research capabilities.</p><p>Curriculum Development: Play a significant role in research, curriculum development, laboratory development, and graduate supervision while attracting research funding to support program initiatives and accreditation activities (e.g., ABET, OAAA).</p><p>Lead Research Output: Produce high-quality scholarly work that contributes to the department's research output and enhances its academic reputation.</p><p>Community Engagement: Participate in service activities for the university as well as professional and local communities, promoting the importance of Chemical Engineering and engaging with industry partners.</p><p>Deliver high-quality teaching experience in foundation, undergraduate (Chemical Engineering), laboratory, postgraduate programmes and in executive programmes.</p><p>Ensure all necessary content and material is in place for the degree programmes in time.</p><p>Construct and plan student assignments, module delivery and assessment, ensuring coherence and relevance.</p><p>Liaise with the faculty Dean on all student matters &amp; timetable planning and manage module timetable, content &amp; resource areas, liaising with academic &amp; technical staff as appropriate.</p><p>Engage with students and demonstrators during laboratory sessions to ensure a high level of understanding is achieved by the students.</p><p>Ensure all learning experiences comply with the expectations of all related standards of the Oman Academic Accreditation Authority (OAAA) and Internation accreditation (ABET).</p><p>Monitor the student voice through meetings, surveys and reviews and liaise with the Faculty Dean in relation to findings, initiating solutions to any student dissatisfaction or other issues.</p><p>Formulate and coordinate the Final Year Projects and Thesis to ensure a consistent and rigorous process, including liaising with industry where necessary.</p><p>Attend Open Days, external events and interviews as required by the Faculty Dean to support recruitment activities.</p><p>Actively engage with businesses/professional bodies/schools and colleges/communities/enterprises, etc., organize student outreach and invite industry speakers to enhance the student experience and facilitate industrial placement of students, as appropriate.</p><p>Organize, prepare and participate in university meetings and events including Boards of Examiners, Programme Reviews, Planning and Monitoring committees, Student/Staff Liaison, and faculty and university committees and policy developments.</p><p>Work with the Faculty Dean and other University representatives to ensure student attainment, success and progression by monitoring student attendance and performance, and obtaining student feedback.</p><p><strong>Desired Candidate Profile</strong></p><p>A PhD in Chemical Engineering, Process Engineering, or a closely related discipline from an internationally recognized university.</p><p>Expertise in one or more of the following areas: Process Design and Simulation, Reaction Engineering and Catalysis, Separation Processes (distillation, absorption, membrane processes), Process Safety and Risk Assessment, Energy Systems / Renewable Energy Technologies, or Transport Phenomena (fluid flow, heat and mass transfer).</p><p>Demonstrated experience teaching Chemical Engineering courses at undergraduate level and supervising research or design projects.</p><p>Active involvement in research within their areas of specialization, showing intellectual engagement with current trends and challenges in Chemical Engineering.</p><p>Preference will be given to candidates with relevant industry experience that complements their academic qualifications.</p><p>Candidates should possess necessary practical computing skills relevant to their areas of expertise, including proficiency in process simulation software (Aspen Plus, Aspen HYSYS, MATLAB).</p><p>Evidence of active participation in university, professional, and local community initiatives related to Chemical Engineering.</p>

<p>Plan, prepare, and deliver high-quality Science lessons in accordance with the approved curriculum. Develop lesson plans that meet curriculum objectives and address students' diverse learning needs. Deliver engaging theoretical and practical Science lessons using a variety of effective teaching strategies. Plan and conduct laboratory experiments while ensuring compliance with health and safety regulations. Prepare, administer, and mark assignments, quizzes, tests, practical assessments, and examinations. Monitor, assess, and evaluate students' academic progress, providing timely and constructive feedback. Maintain accurate records of student attendance, achievement, and assessment results. Create a positive, inclusive, and stimulating learning environment that encourages scientific inquiry and critical thinking. Integrate educational technology and digital resources to enhance teaching and learning. Participate in departmental meetings, school events, extracurricular activities, and professional development programs. Communicate effectively with parents regarding students' academic progress and well-being when required. Collaborate with colleagues to support curriculum development and continuous school improvement. Comply with all school policies, safeguarding requirements, health and safety regulations, and professional standards. Required Skills Excellent English communication skills, both written and spoken. Strong classroom management skills. Excellent knowledge of scientific concepts and practical laboratory skills. Strong planning, organizational, and time management skills. Ability to explain scientific concepts clearly and effectively. Proficiency in Microsoft Office, Google Workspace, and educational technology platforms. Strong analytical, problem-solving, and critical-thinking skills. Ability to work collaboratively within a multicultural environment. Preferred Skills Familiarity with the Cambridge International Curriculum. Experience teaching Science at the Primary, Lower Secondary, or IGCSE level. Experience using Learning Management Systems (LMS) such as Google Classroom or Microsoft Teams. Ability to implement inquiry-based and student-centered learning approaches. Preferred Certifications Valid teaching license (where applicable). Cambridge Professional Development training or certification. Safeguarding and Child Protection certification.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Academic Qualifications</strong> Bachelor's degree in Science or a related field such as Biology, Chemistry, Physics, General Science, or Education (Science). A recognized teaching qualification such as a Bachelor of Education (B.Ed.), PGCE, Postgraduate Diploma in Education, or an equivalent teaching certification is preferred. A Master's degree in the relevant subject or Education is an advantage.</p><p><strong>Experience</strong> A minimum of three (3) years of teaching experience. Experience teaching the Cambridge International Curriculum or another recognized international curriculum is preferred. Experience preparing students for national or international examinations is an advantage.</p>