Chemical Engineer Jobs in Oman

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: HSE Engineer (Health, Safety &amp; Environment Engineer)</p><p>Reports To: HSE Manager / Operations Manager</p><p>Job Details</p><p>Number of Vacancies: 3 Positions</p><p>Salary Range: OMR [REDACTED] per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The HSE Engineer is responsible for ensuring a safe working environment by developing, implementing, and monitoring health, safety, and environmental policies and procedures. The role focuses on risk reduction, regulatory compliance, and promoting a strong safety culture across all operations.</p><p>Key Responsibilities</p><ul><li>Develop, implement, and maintain HSE policies, procedures, and safety programs.</li><li>Conduct risk assessments, hazard identification, and job safety analyses (JSA).</li><li>Monitor workplace activities to ensure compliance with safety and environmental regulations.</li><li>Conduct safety inspections, audits, and site walkthroughs.</li><li>Investigate incidents, accidents, and near-misses, and prepare detailed reports with corrective actions.</li><li>Ensure compliance with local regulations and international safety standards.</li><li>Deliver safety training, toolbox talks, and awareness programs for employees and contractors.</li><li>Maintain HSE documentation, records, and reporting systems.</li><li>Support emergency response planning, drills, and preparedness activities.</li><li>Monitor environmental performance and ensure proper waste management and pollution control practices.</li><li>Coordinate with operations, maintenance, and project teams to ensure safe work practices.</li><li>Recommend improvements to reduce risks and improve workplace safety culture.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Qualifications</b><br>Bachelor s Degree in Environmental Engineering, Safety Engineering, Occupational Health &amp; Safety, Chemical Engineering, or a related field.<br><b>Experience</b><br>Practical Experience: 0 (No prior work experience required)<br>Internship or academic experience in HSE or safety-related activities is an advantage.<br><b>Technical Skills</b><br>Basic understanding of HSE management systems (ISO 45001, ISO 14001).<br>Awareness of risk assessment and safety procedures.<br>Basic knowledge of incident reporting and investigation methods.<br>Ability to assist in safety inspections and training activities.<br>Understanding of environmental compliance concepts.<br>Basic proficiency in Microsoft Office and reporting tools.<br><b>Soft Skills</b><br>Strong willingness to learn and develop professionally.<br>Good communication and teamwork abilities.<br>Strong attention to detail.<br>Ability to follow procedures and work under supervision.<br>Basic problem-solving mindset.<br><b>Working Conditions</b><br>Office, field, and site-based environments. May require site inspections and participation in safety drills and emergency situations.<br><b>Application Note :</b><br>The applicant must be a job seeker.<br>The applicant must be an Omani national.<br>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.<br>The applicant must not have previously benefited from any training program funded by either the public or private sector.<br>The applicant must have no more than three (3) years of work experience.<br>The applicant must not be more than 38 years of age</p></section>

<p>Graduate in Chemical Engineering, having a total 11+ years of engineering experience in Oil and gas industries, Currently working as a Technical Safety Engineer. Involved in the in the execution of several Front End (FEED) &amp; Detailed Design (DD) projects of the oil and gas systems with activities such as Preparation of Hazardous area classification layout &amp; schedul, HFE-VCA report, HFE-SCE report, FGDEA study, HSE action and concern register,HSSE&amp;SP activity plan,SIMOPS report,etc. Previuosly, was involved in the design of the oil and gas systems such as two-phase separation, pump, flare gas recovery. Preparation of datasheets for two phase separators, relief valves, control valves, pumps etc. Preparation of process deliverables such as Basis of Design, Major line sizing report, line list, equipment list and critical valve list, Tie-in shout down philosophy, POM etc. Familiar with international codes and standards such as API, ASME, PDO/Shell codes of practice DEPs, PDO SPs &amp; GU.</p><p><br></p><p>b</p><ul><li>Provide leadership for procurement activities required to support project delivery, including the execution of purchase orders and sourcing of materials through approved company systems.</li><li>Oversee the complete supply chain lifecycle for each purchase order, ensuring compliance with contract requirements, company procedures, and applicable work practices.</li><li>Lead, guide, and develop sourcing and logistics personnel by establishing effective control mechanisms, strengthening process discipline, and improving operational efficiency.</li><li>Develop and implement supply chain strategies that support continuous improvement across contracting, sourcing, logistics, expediting, inventory, and preservation activities.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Graduate in Chemical Engineering, having a total 11+ years of engineering experience in Oil and gas industries, Currently working as a Technical Safety Engineer. Involved in the in the execution of several Front End (FEED) &amp; Detailed Design (DD) projects of the oil and gas systems with activities such as Preparation of Hazardous area classification layout &amp; schedul, HFE-VCA report, HFE-SCE report, FGDEA study, HSE action and concern register,HSSE&amp;SP activity plan,SIMOPS report,etc. Previuosly, was involved in the design of the oil and gas systems such as two-phase separation, pump, flare gas recovery. Preparation of datasheets for two phase separators, relief valves, control valves, pumps etc. Preparation of process deliverables such as Basis of Design, Major line sizing report, line list, equipment list and critical valve list, Tie-in shout down philosophy, POM etc. Familiar with international codes and standards such as API, ASME, PDO/Shell codes of practice DEPs, PDO SPs &amp; GU.</p>

<p><h4>About Al-Futtaim Group</h4> <p>Established in the 1930s as a trading business, Al-Futtaim Group today is one of the most diversified and progressive, privately held regional businesses headquartered in Dubai, United Arab Emirates. Structured into five operating divisions; automotive, financial services, real estate, retail and healthcare; employing more than 35,000 employees across more than 20 countries in the Middle East, Asia and Africa, Al-Futtaim Group partners with over 200 of the world's most admired and innovative brands. Al-Futtaim Group’s entrepreneurship and relentless customer focus enables the organization to continue to grow and expand; responding to the changing needs of our customers within the societies in which we operate.</p> <p>By upholding our values of respect, excellence, collaboration and integrity; Al-Futtaim Group continues to enrich the lives and aspirations of our customers each and every day.</p> <h4>Overview of the role</h4> <p>The objective of this position is to exceed sales target for various water treatment product categories with speciality chemicals and build a robust order pipeline and customer base.</p> <h4>Description of accountability</h4> <p>Sales and marketing for reverse osmosis systems for medical and domestic applications, chlorination systems, sewage treatment and desalination systems along with experience in sale of speciality chemicals associated.</p> <p>Candidate will be responsible to develop dosing systems, HVAC flushing business and chemicals sales business.</p> <p>The sales engineer must be able to initiate contact with targeted customers, deliver product demonstrations, coordinate and drive sales opportunities through the sales lifecycle, and travel assigned sales territory to establish and retain effective relationships with customers.</p> <p>Candidate must be self-motivated, organized and analytical with minimum three years of experience involving design, specification and commissioning of water treatment systems.</p> <p>Review and understand techno-commercial proposals prepared by principals and develop sales proposals, present sales contracts and finalise orders.</p> <p>Preparation of technical submittals along with P&ID and BOQ’s.</p> <p>Work with customers and principal on design and price issues.</p> <p>Generate and qualify leads along with developing and maintaining customer database.</p> <p>Developing new customers and new avenues for sale of products.</p> <p>Ensuring timely payment collections and to ensure department profitability.</p> <p>Generate profitability from each sales account and build a balanced portfolio of clients across industries and geographies to de-risk revenue growth.</p> <p>Identify and develop new market and client opportunities.</p> <p>Track competitors and their strategies to build on company’s market share on each product category.</p> <p>Maintain strict commercial discipline by tracking and collecting receivables from customers, maintaining credit and or other documentations in line with company policy.</p> <p>Self-motivated to support the customers by maintaining constant communication with customer, projects execution team, manufacturer and service teams.</p> <h4>Required skills to be successful</h4> <ul> <li>Interpersonal skills</li> <li>Problem analysis and problem-solving</li> <li>Technical knowledge</li> <li>Persuasiveness</li> <li>Adaptability</li> <li>Delighting our customers</li> <li>Collaboration</li> <li>Managing complexity</li> <li>Influencing others</li> <li>Taking initiative</li> <li>Drive for results</li> <li>Engaging leadership</li> <li>Developing talent</li> </ul> <h4>What equips you for the role</h4> <ul> <li>Bachelor degree (masters preferred)</li> <li>5-6+ years’ experience in water treatment sales with minimum 3 years of design background</li> <li>Graduate in chemical engineering or diploma in chemical engineering</li> <li>Optional postgraduate in marketing or business administration with water treatment industry experience</li> <li>Technical and application knowledge in reverse osmosis plants, sewage treatment plants, industrial water treatment, dosing systems and chemical sales</li> <li>Experienced in design of water treatment systems</li> <li>Usage of computing applications and Microsoft Office applications</li> <li>Conversant with data and competition trend analysis</li> <li>Excellent communication and proposal making skills</li> <li>Experience in Gulf with valid Oman or Middle East driving license preferred</li> </ul> <h4>About Al-Futtaim Retail</h4> <p>Al-Futtaim Retail has established itself as one of the leaders in retail across the Middle East, Africa and Asia over the past 30 years. We have developed partnerships with some of the biggest and most respected brands in the world including IKEA, ACE and Toys R Us in the Middle East and the Inditex Group of Brands (Zara, Mango, Bershka and P&B) across Asia. We are also one of the largest global partners of Marks and Spencer’s in both regions with over 75 stores offering both fashion and food options.</p> <p>Most recently we have been responsible for bringing brands to the Middle East for the first time with the exciting launches of Watsons and B&Q and we aim to continue to be agile and adaptive to our markets with new launches and further development. For this to be possible we aim to recruit the best talent from all backgrounds who will continue to challenge and develop our diverse workforce which includes over 100 nationalities across 12 countries. Join us today and make a difference.</p></p><p></p>

<p>Lead process technology and engineering activities across operations, maintenance, and capital projects. Provide technical leadership in process engineering, plant optimization, and troubleshooting. Support plant expansions, modifications, commissioning, and start-up activities. Review and approve process engineering designs, calculations, and technical deliverables. Identify and resolve complex process-related operational challenges. Lead process safety studies including HAZOP, SIL assessments, and technical risk reviews. Drive Advanced Process Control (APC) initiatives to improve plant stability, performance, and efficiency. Monitor process performance and recommend improvements to increase reliability and production efficiency. Support engineering studies, feasibility evaluations, and technology assessments. Act as the subject matter expert for process technology and provide technical guidance to cross-functional teams. Participate in failure investigations and root-cause analyses for process-related incidents. Ensure compliance with company standards, engineering practices, and HSE requirements. Manage interfaces with contractors, consultants, vendors, and internal stakeholders. Promote innovation, digitalization, and the adoption of emerging technologies. Mentor and develop junior engineers while fostering a culture of continuous improvement and technical excellence.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical Engineering, Process Engineering, Physics, or a related discipline.</li><li>Minimum 10 years of experience in the Oil &amp; Gas, Chemical, Energy, or related industries.</li><li>Minimum 5 years of technical engineering experience in a processing or industrial environment.</li><li>Strong experience in process engineering, plant operations support, process safety, and technical troubleshooting.</li><li>Experience supporting major industrial projects, commissioning, and plant modifications.</li><li>Knowledge of Advanced Process Control (APC), HAZOP, SIL studies, and process optimization methodologies is highly desirable.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wood is recruiting for a Senior Piping Engineer to join its Projects team focusing on delivering across FEED and Detail design scopes of work. Position is based in Muscat, Oman. This role is to supervise a team of process engineers to translate the limited information from the Concept Selection Report and/or Basis for Design to a full process design and project specifications. Supervise a team of process engineers to carry out the Process Engineering activities (Define stage) for an assigned area of a specific project in order to generate the relevant Process Engineering deliverables on time according to DCAF requirements. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws. What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. Experience Technical Authority TA2 Certification Degree in Chemical Engineering. Minimum 6 years experience in upstream oil &amp; gas Process Engineering. Minimum 6 years in Front End Engineering Design (FEED)/Engineering Experience. Good communicator and good inter-personal/leadership skills. Experience in managing small teams and third part contractor/licensor. Acting as a champion to break new grounds and self-motivated. Fluent in English; Written and Spoken. Designing the future. Transforming the world Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas. What we can offer Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details. Workmen s Compensation: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability. Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being. Responsibilities Prepare Process Engineering Cost, Time and Resource (CTR) Catalogue for projects. Supervise a team of process engineers assigned to a project area (supervised by Project process Lead). Contribute to Basis for Design, Basis of Design, and Project Specifications/Philosophies. Carry out/review Process Simulations Models and Flare &amp; Blowdown Simulations. Generate/review Heat &amp; Material Balance (H&amp;MB) Tables. Develop/review Process/Utility Flow Schemes and Control Narrative. Develop/review Process/Utility Engineering Flow Schemes and Process Safeguarding Flow Schemes. Review Sizing for Process Equipment and Relief Valves. Carry out/review Line Hydraulics and provide/review Inputs to Line Listing. Develop/review Safeguarding Memorandum. Carry out Process Engineering Studies. Participate in Design Reviews, HAZOP s, IPF Classifications, 3D Model review, Plot plan, etc. Implement, practice, and monitor Quality Management System (QMS) in line with ISO 9PHONE_NUMBER and API Q2 2nd edition requirements Manage Process Inputs to: Material Selection Report Cause &amp; Effect Diagrams. Instrument Data Sheets. Alarm &amp; Trip Setting. Hazardous Area Classification Schedule. Initiate, check, and/or approve Process Engineering Deliverables.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>What makes you remarkable?</b></p><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p><b>Experience</b></p><ul><li>Technical Authority TA2 Certification</li><li>Degree in Chemical Engineering.</li><li>Minimum 6 years experience in upstream oil &amp; gas Process Engineering.</li><li>Minimum 6 years in Front End Engineering Design (FEED)/Engineering Experience.</li><li>Good communicator and good inter-personal/leadership skills.</li><li>Experience in managing small teams and third part contractor/licensor.</li><li>Acting as a champion to break new grounds and self-motivated.</li><li>Fluent in English; Written and Spoken.</li></ul><p></p></section>

<p>Job title Sr. Engineer, Technical Safety Grade Stream Operated Assets Function Projects Delivery Engineering Location Oman Muscat / Project Sites Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Manager, Technical Safety Direct Reports - Job purpose Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main Tasks and Responsibilities Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications. Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities. Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation. Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent). Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP. Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects. Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards. Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase. Support the preparation and review of technical documentation for regulatory submissions and engineering authority approvals. Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle. Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes. Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments. Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly. Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture. Perform other related duties as assigned. Key interactions Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function. External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities. Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</li><li>Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (T V or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</li><li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li><li>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</li><li>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</li><li>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</li><li>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</li><li>Exposure to Fire &amp; Gas system design and philosophy development.</li><li>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</li><li>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</li><li>Strong analytical and problem-solving skills.</li><li>Good communication skills, verbal and written.</li><li>Attention to detail and high level of technical accuracy.</li><li>Ability to work effectively in multidisciplinary project teams.</li><li>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</li><li>Ability to manage competing priorities in a project environment.</li><li>Cultural sensitivity in a multinational environment.</li><li>Computer literacy including MS Office and engineering software.</li><li>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</li><li>Quantitative and qualitative risk assessment techniques.</li><li>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</li><li>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</li><li>Fire &amp; Gas detection system design and philosophy.</li><li>Safety Case development and Major Accident Hazard (MAH) management.</li><li>Process safety engineering principles.</li><li>Applicable international standards (API, IEC, NFPA, IP codes).</li><li>Technical documentation and report writing.</li></ul>

<p>Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main Tasks and Responsibilities</strong></p><ul><li>Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications.</li><li>Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities.</li><li>Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation.</li><li>Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent).</li><li>Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP.</li><li>Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects.</li><li>Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards.</li><li>Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase.</li><li>Support the preparation and review of technical safety documentation for regulatory submissions and engineering authority approvals.</li><li>Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle.</li><li>Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes.</li><li>Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments.</li><li>Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly.</li><li>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</li><li>Perform other related duties as assigned.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function.</li><li>External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities.</li></ul><p><strong>Notable Working Conditions.</strong></p><ul><li>Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><ul><li>Required: Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</li><li>Preferred: Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (T V or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</li><li>Language: Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li></ul><p><strong>Background and experience</strong></p><ul><li>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</li><li>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</li><li>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</li><li>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</li><li>Exposure to Fire &amp; Gas system design and philosophy development.</li><li>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</li><li>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</li></ul><p><strong>Competencies and skills</strong></p><ul><li>Soft: Strong analytical and problem-solving skills. Good communication skills, verbal and written. Attention to detail and high level of technical accuracy. Ability to work effectively in multidisciplinary project teams. Self-motivated with a proactive approach to identifying and resolving technical safety issues. Ability to manage competing priorities in a project environment. Cultural sensitivity in a multinational environment.</li><li>Technical: Computer literacy including MS Office and engineering software. Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie). Quantitative and qualitative risk assessment techniques. Consequence modelling tools (PHAST, Safeti, FRED, or equivalent). Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511). Fire &amp; Gas detection system design and philosophy. Safety Case development and Major Accident Hazard (MAH) management. Process safety engineering principles. Applicable international standards (API, IEC, NFPA, IP codes). Technical documentation and report writing.</li></ul>

<p><b>Job purpose</b></p><p><br></p><p>Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework.</p><p><br></p><p>&nbsp;</p><p><br></p><p>The position will act in accordance with the OQEP’s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani’s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><br></p><p><b>Main Tasks and Responsibilities</b></p><p><br></p><p>Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications.</p><p>Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities.</p><p>Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation.</p><p>Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent).</p><p>Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP.</p><p>Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects.</p><p>Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards.</p><p>Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase.</p><p>Support the preparation and review of technical safety documentation for regulatory submissions and engineering authority approvals.</p><p>Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle.</p><p>Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes.</p><p>Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments.</p><p>Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly.</p><p>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</p><p>Perform other related duties as assigned.</p><p>Key interactions</p><p><br></p><p>Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function.</p><p><br></p><p>External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities.</p><p><br></p><p>Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><b><br></b></p><p><b>Education requirements</b></p><p><br></p><p>Required: Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</p><p><br></p><p>Preferred: Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (TÜV or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</p><p><br></p><p>Language</p><p><br></p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p><br></p><p>Background and experience</p><p><br></p><p>Competencies and skills</p><p><br></p><p>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</p><p>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</p><p>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</p><p>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</p><p>Exposure to Fire &amp; Gas system design and philosophy development.</p><p>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</p><p>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</p><p>Soft:</p><p><br></p><p>Strong analytical and problem-solving skills.</p><p>Good communication skills, verbal and written.</p><p>Attention to detail and high level of technical accuracy.</p><p>Ability to work effectively in multidisciplinary project teams.</p><p>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</p><p>Ability to manage competing priorities in a project environment.</p><p>Cultural sensitivity in a multinational environment.</p><p>&nbsp;</p><p><br></p><p>Technical:</p><p><br></p><p>Computer literacy including MS Office and engineering software.</p><p>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</p><p>Quantitative and qualitative risk assessment techniques.</p><p>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</p><p>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</p><p>Fire &amp; Gas detection system design and philosophy.</p><p>Safety Case development and Major Accident Hazard (MAH) management.</p><p>Process safety engineering principles.</p><p>Applicable international standards (API, IEC, NFPA, IP codes).</p><p>Technical documentation and report writing.</p><p>&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>Job title Process Engineer, Heavy Oils Company OQ8 Function TSD Department Process Engineering, Control Section Heavy Oils Location Oman (Duqm) Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Team Leader, Heavy Oils Direct reports - Job purpose</p><p>Provides engineering support for the development, implementation, and continuous improvement of process optimization-based activities in Heavy Oil process (Heavy Oils CDU/VDU/DCU/KTU/LTU/SGP), under TL Process Engineering Heavy Oils (Heavy Oils CDU/VDU/DCU/KTU/LTU/SGP) scope s, acting as team player for assigned units; through:</p><p>(1) Identifies opportunities of optimization, as well as investigates and supports optimization proposals from others executing &amp; leading the corresponding engineering, maintenance and operational activities.</p><p>(2) Execute actions to ensure that Management process optimization Services meets Management strategy and performance goals; in order to ensure projects and service targets are achieved efficiently and to optimum standards</p><p>The position will act in accordance with the OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, HSE standards, Oman s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Scope:</p><p>Unit Purpose Key Features Crude Distillation Unit (CDU)</p><p>Distils crude oil into various fractions based on boiling points.</p><p>Atmospheric Distillation, Preheating, Fractionating Column.</p><p>Vacuum Distillation Unit (VDU)</p><p>Processes heavier fractions from the CDU under vacuum to lower boiling points.</p><p>Vacuum Pressure, Heavy Oil Processing, Complex Equipment.</p><p>Delayed Coker Unit (DCU)</p><p>Converts heavy residues into lighter products and petroleum coke.</p><p>Cooking Process, High Temperature, Coke Drums.</p><p>Kerosene Treating Unit (KTU)</p><p>Treats kerosene to remove impurities and improve product quality.</p><p>Desulfurization, Hydrotreating, Product Quality.</p><p>Light Naphtha Isomerization Unit (LTU)</p><p>Converts light naphtha into high-octane gasoline components.</p><p>Isomerization, Catalysts, Product Quality.</p><p>Sour Gas Processing Unit (SGP)</p><p>Processes sour gas to remove sulfur compounds and recover valuable gases.</p><p>Amine Treatment, Sulfur Recovery, Gas Purification</p><p>Main tasks and responsibilities:</p><p>Data Analysis and Optimization</p><p>Provides robust support while analyses plant s data using PI and LIMS and provides remedial solutions for deviations.</p><p>Identifies optimization opportunities.</p><p>Identifies debottlenecking opportunities and improves unit efficiency.</p><p>Provides technical recommendation in resolving complex process issues.</p><p>Design and Process Optimization</p><p>Coordinates and reviews complex design work.</p><p>Develops Heat and Material Balances, designs minor modifications.</p><p>Prepares preliminary documents for tender submissions.</p><p>Leads engineering reviews for plant modifications and improvement projects.</p><p>Develops and validates process simulation and optimization studies.</p><p>Provides technical guidance to multidisciplinary teams.</p><p>Equipment Monitoring and Troubleshooting</p><p>Monitors equipment like reactors, drums, compressors.</p><p>Performs RCA and proposes corrective actions.</p><p>Safety and Compliance</p><p>Develops technical procedures.</p><p>Leads HAZOP, PSSR, and process safety reviews.</p><p>Provides technical leadership for MOC and risk assessment activities.</p><p>Promotes process safety best practices across the organization.</p><p>Process Engineering Support</p><p>Provides support for the development of Key Documents.</p><p>Provides technical assistance to other sections.</p><p>Develops advanced simulation models and digital performance tools.</p><p>Mentors and develops junior engineers.</p><p>Reviews and Approvals</p><p>Provides technical approval of key process engineering deliverables.</p><p>Performs independent technical reviews of engineering studies and proposals.</p><p>Represents Process Engineering in technical committees and strategic initiatives.</p><p>Key interactions</p><p>Internal: Liaise with colleagues and stakeholders for day-to-day work.</p><p>External: Consultants, contractors, vendors Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p><p>Education requirements Minimum Qualifications for this position are an Engineering degree in Chemical Engineering, Process Engineering or Operations Engineering or relevant Field.</p><p>Language requirements Excellent knowledge of written, read, and spoken English (required)</p><p>Background and experience Competencies and skills</p><p>5 years of of relevant refining/process engineering experience</p><p>Extensive experience in Heavy Oils CDU/VDU/DCU/KTU/LTU/SGP operations and optimization or relevant field.</p><p>Proven track record in leading process improvement and debottlenecking initiatives.</p><p>Experience leading refinery commissioning, start-up, and troubleshooting activities.</p><p>Strong experience in Process Safety Management (PSM), HAZOP, and MOC reviews.</p><p>Demonstrated capability in mentoring and developing junior engineers.</p><p>Advanced proficiency in process simulation and modeling tools (HYSYS, PetroSIM, UniSim).</p><p>Experience supporting cross-functional projects and strategic business initiatives.</p><p>Soft:</p><p>Strong Communication skill verbal and written.</p><p>Personal and Team Accountability</p><p>Reporting skills</p><p>Effective planning and organizing skills.</p><p>Proficient at interpreting Technical Drawings</p><p>Critical Thinking Skills</p><p>Result orientation</p><p>Planning and Organizing</p><p>Decisiveness</p><p>Exercising influence</p><p>Demonstrated ability to cooperate with and influence peers.</p><p>Strong leadership and mentoring skills.</p><p>Ability to lead cross-functional teams and technical workshops.</p><p>Strategic thinking and problem-solving capability.</p><p>Effective stakeholder management and influencing skills across all organizational levels.</p><p>Strong decision-making capability under operational and business pressures.</p><p>Technical:</p><p>Computer literacy including MS Office</p><p><br></p><p><strong>Desired Candidate Profile</strong></p>Minimum Qualifications for this position are an Engineering degree in Chemical Engineering, Process Engineering or Operations Engineering or relevant Field. Excellent knowledge of written, read, and spoken English (required)<br><br>5 years of of relevant refining/process engineering experience<br>Extensive experience in Heavy Oils CDU/VDU/DCU/KTU/LTU/SGP operations and optimization or relevant field.<br>Proven track record in leading process improvement and debottlenecking initiatives.<br>Experience leading refinery commissioning, start-up, and troubleshooting activities.<br>Strong experience in Process Safety Management (PSM), HAZOP, and MOC reviews.<br>Demonstrated capability in mentoring and developing junior engineers.<br>Advanced proficiency in process simulation and modeling tools (HYSYS, PetroSIM, UniSim).<br>Experience supporting cross-functional projects and strategic business initiatives.<br><br>Soft:<br>Strong Communication skill verbal and written.<br>Personal and Team Accountability<br>Reporting skills<br>Effective planning and organizing skills.<br>Proficient at interpreting Technical Drawings<br>Critical Thinking Skills<br>Result orientation<br>Planning and Organizing<br>Decisiveness<br>Exercising influence<br>Demonstrated ability to cooperate with and influence peers.<br>Strong leadership and mentoring skills.<br>Ability to lead cross-functional teams and technical workshops.<br>Strategic thinking and problem-solving capability.<br>Effective stakeholder management and influencing skills across all organizational levels.<br>Strong decision-making capability under operational and business pressures.<br><br>Technical:<br>Computer literacy including MS Office<br>SOP interpretation.<br>Good knowledge of modern Operation technologies &amp; Planning techniques for Heavy Oil processes.<br>Knowledge of engineering best practices.<br>Sound judgment in technical matters with good skills in the engineering field.<br>Good knowledge of HSE / SCE equipment &amp; plans.<br>Knowledge in estimating, budgeting, and cost control.<br>Advanced proficiency in process simulation tools such as HYSYS and Petro-SIM.<br>Strong knowledge of refinery process optimization, energy efficiency, and debottlenecking techniques.<br>Experience with Advanced Process Control (APC), PI systems, and data analytics applications.<br>Knowledge of Process Safety Management (PSM), HAZOP, SIL, MOC, and Root Cause Analysis methodologies.<br>Strong understanding of refinery commissioning, start-up, shutdown, and turnaround activities.<br>Ability to review and approve engineering studies, design packages, and technical deliverables.

<p>Job Title: Graduate Teaching Assistant (GTA) in Engineering (Chemical, Energy) or closely related disciplines, Faculty of Engineering Job Summary: This is a predominantly teaching focused position to manage and support delivery of postgraduate, undergraduate, foundation and executive programmes. Applicants should demonstrate excellence in assisting teaching and research. Preference will be given to candidates with previous experience in teaching and research engagement. The successful candidate is expected to:</p><p>- Assist in teaching: Support the delivery of modules at the undergraduate level in subjects related to chemical, electrical, or mechanical engineering. Engagement with classes, laboratories, and supervision is expected in both semesters (2 semesters per academic year).</p><p>- Supervise Projects: Assist in supervising undergraduate design projects through multiple modules, and support in supervising students through laboratory experimentation sessions. Throughout these tasks, the GTA will ensure students are receiving guidance on their work, methodologies and outcomes.</p><p>- Engage in Research: Work with research supervisors and assist in the conduct of research activities that lead to meeting the research goals of the faculty.</p><p>- Collaborate for Grants: Support in developing research collaborations that result in research grant applications, enhancing the department's funding and research capabilities.</p><p>- Curriculum Development: Participate in curriculum development, and graduate supervision while attracting research funding to support program initiatives.</p><p>- Community Engagement: Participate in service activities for the university as well as professional and local communities, promoting the importance of engineering science.</p><p>Responsibilities:</p><p>- Reporting to the academic director of the relevant faculty (line manager)</p><p>- Complete an annual report, submit to the line manager</p><p>- Following the shadowing period (1 year) to lead on the seminar delivery for the shadowed modules while continuing to attend the same lectures.</p><p>- Assisting in assessment marking and entering grades on the system</p><p>- Support discussion sections, tutorials, lab sessions, and attending faculty meetings</p><p>- Assist students with coursework, study strategies, and problem-solving</p><p>- Address student concerns and refer serious issues to the instructor</p><p>- Set up equipment or software for labs or demonstrations</p><p>- Take attendance and manage class records</p><p>- Assist in invigilating exams</p><p>- Provide feedback about student progress and course effectiveness</p><p>Job Features Responsible To Faculty Dean, Faculty of Engineering Location Muscat, Oman (some local travel may be required) Hours Full time/Part Time. Hours as necessary for the role. Start date 01-10-2026</p><p><strong>Desired Candidate Profile</strong></p><p>Requirements The Department invites applications for full-time candidates. The position within the faculty of engineering requires:</p><ul><li>Educational Qualifications: Muscat University alumni with BEng in Chemical Engineering, BEng in Energy Engineering, and MSc in Renewable Energy Engineering.</li><li>Teaching Experience: Preferred to have experience in teaching/tutoring engineering courses at the undergraduate level and supervising students.</li><li>Research Engagement: Preferred to have experience or engagement in research within their areas of specialization, showing intellectual engagement with current trends and challenges in engineering.</li><li>Practical Skills: Candidates should possess necessary practical computing skills relevant to their areas of expertise.</li><li>Certifications: Professional certifications are plus, demonstrating a commitment to ongoing professional development.</li></ul><p>Applicants should provide a current CV and a cover letter justifying their suitability for the position. In doing so, applicants should use their qualifications and related experience in academia and research in an HE environment, teaching areas of interest and ability, and motivation for applying to Muscat University. While we value the interest shown by every applicant, we are able to respond only to short-listed candidates. * The job description may be altered at any time in the future in line with the level of the post to meet changing institutional requirements, but only in full consultation with the post-holder.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To provide guidance, insights, and execute with autonomy, the refinery hydrocarbon accounting and reconciliation. This is achieved by practicing defined strategies, plans, and programs for the end-to-end process of comparing and reconciling the production of refinery hydrocarbons among the parties involved in production and sales under the purview of Hydrocarbon Accounting leadership. The individual will act as the Subject Matter Expert for HCA Refinery accounting reconciliation, including measurement, data collection, validation, reconciliation, and reporting.</p><p>1) Provide guidance and insights and ensures that hydrocarbon accounting procedures and reports are prepared accurately and according to agreed schedules. Additionally, conducts routine reconciliation of production and off-take satisfactorily in liaison with reconciliation engineers, Production Planning, Scheduling, and the Financial Accounting team.</p><p>2) Provide guidance and insights while developing strategies for Fuel &amp; loss accounting in accordance with high management performance standards, focusing on control/reduction planning.</p><p>3) Offers guidance for Refinery Production Accounting, including the formulation and drafting of Crude processing and finished product mass balance reports to provide qualitative input to stakeholders.</p><p>4) Provide guidance, insights, and data field analysis to address production difficulties effectively.</p><p>5) Execute the reconciliation of hydrocarbon production data with third parties, ensuring alignment with production targets while tracking and controlling production.</p><p>6) Manage the accounting of Intra-plant &amp; Intercompany streams within Group companies.</p><p>7) Guide and coach younger staff in HCA Refinery Reconciliation processes, identifying potential losses or discrepancies in the production and sales process, implementing corrective actions to prevent future losses, improve efficiency, and ensure accurate compensation for all parties involved in the production and sales chain.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by IT hardware and software platforms, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main Accountabilities</strong></p><p><strong>Scope Refinery Hydrocarbon Accounting and Reconciliation:</strong></p><p>Develop and assess Hydrocarbon accounting procedures and ensure that accounting reports are prepared accurately and according to agreed schedules for routine production reconciliation.</p><p>Conduct off-take activities satisfactorily in collaboration with the Senior Engineer in Production Planning, Scheduling, and Finance Accounting.</p><p>Devise strategies for fuel &amp; loss accounting in alignment with Heat-mass balance (HMB) standards and plan for control/reduction.</p><p>Formulate &amp; draft crude processing and finished products mass balance reports to provide qualitative input to stakeholders.</p><p>Review field data analysis to adopt plans that overcome production difficulties.</p><p>Account for the hydrocarbons produced and reconcile data with third parties while effectively tracking and controlling production to ensure meeting production targets. Handle accounting of Intra-plant &amp; Intercompany streams within Group companies.</p><p><strong>General</strong> Through active participations, recommend actions and manage Mass balance data to ensure the optimum use of resources.</p><p>Contribute to the achievement of the approved Performance Objectives for the Section / Department in line with the Company Performance framework</p><p><strong>Data collection &amp; Master Data Validation</strong> Manage and maintain the company's records of movements with the operation departments, and ensure updated changes are captured in a timely manner.</p><p>Ensure high quality data is recorded into reconciliation tools &amp; accurate mass balance information in ERP.</p><p>Manage the database and produce monthly reports of each production facilities.</p><p>Maintain database and prepare report for deferment analysis, plant production opportunity losses and related statistics.</p><p>Enable the accurate Master data management for ERP &amp; Reconciliation application.</p><p>Validate the accuracy of the data collected by comparing it to other sources of data and industry standards.</p><p><strong>System development.</strong></p><p>Execute hydrocarbon accounting activities and maintain the reporting system.</p><p>Ensure that product yields and quantities are continuously monitored, analysing performance deviations, and initiating investigations for any deviations. Determine corrective actions as necessary.</p><p>Prepare internal and external daily and monthly management production reports, ensuring that the required report quality is achieved and that reports are issued in an effective and timely manner.</p><p>Prepare various ad hoc reports related to hydrocarbon deliveries and inventory.</p><p>Conduct daily analysis of production, identifying production losses, and highlighting production optimization opportunities.</p><p>Administer procurement and sales contracts related to hydrocarbon accounting activities.</p><p>Reconcile accounts and generate various reports related to refined product exports.</p><p>Perform necessary month and year-end closing activities.</p><p>Analyse the Process historian data for movement reconciliation.</p><p>Facilitate hydrocarbon accounting auditing and provide all required inputs as requested.</p><p>Provide input for monthly performance monitoring reviews (PMR), follow up on observations, and close out any identified gaps</p><p><strong>Supervision</strong> Provide opportunities for training and development of employees under his/her direction, assess their progress and suggest gap closing program</p><p><strong>Policies, Systems, Processes &amp; Procedures</strong> Implement approved Section / Department policies, processes, systems, standards, and procedures to support execution of the Section s / Department work programs in line with Company and International standards.</p><p><strong>Innovation and Continuous Improvement</strong></p><p>Design and implement new tools and techniques to improve the quality and efficiency of operational processes.</p><p>Identify improvements in internal processes against best practices in pursuit of greater efficiency in line with international standards to define intelligent solutions for issues confronting the function.</p><p>Review of system Validation, Process control &amp; bringing more Automation, Dashboard reporting.</p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education requirements</strong> Minimum Qualifications for this position are bachelor s degree in chemical engineering or similar</p><p><strong>Language</strong> Excellent knowledge of written, read, and spoken English (required)</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><p>8+ years of relevant experience</p><p>Demonstrated experience in the Oil &amp; Energy sector, with emphasis in Downstream (Refinery Operations &amp; Processes)</p><p>Experience in reading and analyse benchmarking activities</p><p>Process Reconciliation Tools. (Preferably Sigmafine)</p><p>Process Historian, IT interfaces</p><p>Hydrocarbon Contract management,</p><p>Performance analysis, assessment with Analytical &amp; Reporting tools (SAP - BW/BI, Power BI)</p><p>Project management</p><p>Financial advice and support to business projects</p><p>Have a sound knowledge of API / ASTM standard for the quantity conversion.</p><p>Have a sound knowledge of SAP transactions, Product pricing, Production cost accounting &amp; gross margin analysis.</p><p><strong>Soft:</strong></p><p>Detailed oriented with a self-starter attitude.</p><p>Excellent Organization and time management</p><p>Result oriented.</p><p>Communication skill verbal and written</p><p>Detailed Analytical &amp; Accurate Reporting skills</p><p>Personal and Team Accountability</p><p>Decisiveness</p><p>Problem Solving Skills</p><p>Work Prioritization, Planning and Organizing</p><p>Ability to work under pressure and handle sensitive/critical issues effectively.</p><p><strong>Technical:</strong></p><p>Strong computer skills, including proficiency in Microsoft Word, Excel, Vision, and PowerPoint</p><p>Excellent writer (technical and non-technical)</p><p>Application Knowledge for HCA accounting &amp; reconciliation,</p><p>Knowledge of ERP configuration, ERP transactions, rules, and regulations</p><p>Knowledge of Policies &amp; Procedure of business process management</p><p>Knowledge of Laboratory Processes.</p><p></p></section>

<p>Job title Process Engineer, Hydro-Processing Company OQ8 Function TSD Department Process Engineering &amp; Control Section Hydro-processing Location Oman (Duqm) Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Team Leader, Hydro-processing Direct reports - Job purpose<br><br>Provides engineering support for the development, implementation, and continuous improvement of process optimization-based activities in Hydro Processing (HPU, DHT,HCU) units, under TL Process Engineering Hydro Processing (HPU, DHT, HCU) scope s, acting as team player for assigned units; through:<br><br>(1) Identifies opportunities of optimization, as well as investigates and supports optimization proposals from others executing &amp; leading the corresponding engineering, maintenance and operational activities.<br>(2) Execute actions to ensure that Management process optimization Services meets Management strategy and performance goals; in order to ensure projects and service targets are achieved efficiently and to optimum standards<br><br>The position will act in accordance with the OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, HSE standards, Oman s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main tasks and responsibilities:<br>Unit Purpose Key Features HPU (Hydro-processing Unit) General term for units that perform hydro-treating or hydrocracking. Utilizes hydrogen to treat petroleum fractions.<br>Removes contaminants like sulfur, nitrogen, and metals.<br>Enhances product quality and ensures compliance with environmental standards.<br>DHT (Diesel Hydrotreater) Specifically designed to treat diesel fractions to produce ultra-low sulfur diesel (ULSD). Removes sulfur and nitrogen compounds from diesel feedstock.<n>Operates at high temperatures and pressures with hydrogen.<br>Catalysts are used to facilitate the reaction, improving the cetane number and stability of diesel.<br>HCU (Hydrocracking Unit) Breaks down heavy hydrocarbons into lighter, more valuable products like gasoline, diesel, and jet fuel Uses hydrogen under high pressure and temperature.<br>Employs dual-function catalysts (acidic function for cracking and metallic function for hydrogenation).<br>Converts heavy feedstock into lighter, cleaner products.<br>Enhances the yield of high-value products.<br>Accountabilities:<br>Data Analysis and Optimization<br>Provides robust support while analyses plant s data using PI and LIMS and provides remedial solutions for deviations.<br>Identifies optimization opportunities.<br>Identifies debottlenecking opportunities and improves unit efficiency.<br>Provides technical recommendation in resolving complex process issues.<br>Design and Process Optimization<br>Coordinates and reviews complex design work.<br>Develops Heat and Material Balances, designs minor modifications.<br>Prepares preliminary documents for tender submissions.<br>Leads engineering reviews for plant modifications and improvement projects.<br>Develops and validates process simulation and optimization studies.<br>Provides technical guidance to multidisciplinary teams.<br>Equipment Monitoring and Troubleshooting<br>Monitors equipment like reactors, drums, compressors.<br>Performs RCA and proposes corrective actions.<br>Safety and Compliance<br>Develops technical procedures.<br>Leads HAZOP, PSSR, and process safety reviews.<br>Provides technical leadership for MOC and risk assessment activities.<br>Promotes process safety best practices across the organization.<br>Process Engineering Support<br>Provides support for the development of Key Documents.<br>Provides technical assistance to other sections.<br>Develops advanced simulation models and digital performance tools.<br>Mentors and develops junior engineers.<br>Reviews and Approvals<br>Provides technical approval of key process engineering deliverables.<br>Performs independent technical reviews of engineering studies and proposals.<br>Represents Process Engineering in technical committees and strategic initiatives.<br>Key interactions<br>Internal: Liaise with colleagues and stakeholders for day-to-day work.<br>External: Consultants, contractors, vendors Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</n></p><p><strong>Desired Candidate Profile</strong></p><h4>Minimum Qualifications</h4><p>Minimum Qualifications for this position are an Engineering degree preferably in Chemical Engineering or relevant field</p><h4>Language requirements</h4><p>Excellent knowledge of written, read, and spoken English (required)</p><h4>Background and experience</h4><ul><li>5 years of of relevant refining/process engineering experience</li><li>Extensive experience in Hydro Processing (HPU, DHT, HCU) operations and optimization or relevant field .</li><li>Proven track record in leading process improvement and debottlenecking initiatives.</li><li>Experience leading refinery commissioning, start-up, and troubleshooting activities.</li><li>Strong experience in Process Safety Management (PSM), HAZOP, and MOC reviews.</li><li>Demonstrated capability in mentoring and developing junior engineers.</li><li>Advanced proficiency in process simulation and modeling tools (HYSYS, PetroSIM, UniSim).</li><li>Experience supporting cross-functional projects and strategic business initiatives.</li></ul><h4>Soft Skills</h4><ul><li>Strong Communication skill verbal and written.</li><li>Personal and Team Accountability</li><li>Accurate Reporting skills</li><li>Effective planning and organizing skills.</li><li>Proficient at interpreting Technical Drawings</li><li>Critical Thinking Skills</li><li>Result orientation</li><li>Planning and Organizing</li><li>Decisiveness</li><li>Exercising influence</li><li>Demonstrated ability to cooperate with and influence peers.</li><li>Strong leadership and mentoring skills.</li><li>Ability to lead cross-functional teams and technical workshops.</li><li>Strategic thinking and problem-solving capability.</li><li>Effective stakeholder management and influencing skills across all organizational levels.</li><li>Strong decision-making capability under operational and business pressures.</li></ul><h4>Technical Skills</h4><ul><li>Computer literacy including MS Office</li><li>SOP interpretation.</li><li>Good knowledge of modern Operation technologies &amp; Planning techniques for Hydro Processing (HPU, DHT, HCU) processes.</li><li>Knowledge of engineering best practices.</li><li>Sound judgment in technical matters with good skills in the engineering field.</li><li>Good knowledge of HSE / SCE equipment &amp; plans.</li><li>Knowledge in estimating, budgeting, and cost control.</li><li>Advanced proficiency in process simulation tools such as HYSYS and Petro-SIM.</li><li>Strong knowledge of refinery process optimization, energy efficiency, and debottlenecking techniques.</li><li>Experience with Advanced Process Control (APC), PI systems, and data analytics applications.</li><li>Knowledge of Process Safety Management (PSM), HAZOP, SIL, MOC, and Root Cause Analysis methodologies.</li><li>Strong understanding of refinery commissioning, start-up, shutdown, and turnaround activities.</li><li>Ability to review and approve engineering studies, design packages, and technical deliverables.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job title T</b>eam Leader, SUW &amp; O&amp;L Company OQ8 Function TSD Department Process Engineering, Control &amp; Safety Section Process Engineering Location Oman - Duqm Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Head Process Engineering, Control &amp; Safety Direct reports 3 Job purpose</p><p>Leads the team for optimizing the process engineering activities across the Sulfur/Utilities/Wastewater &amp; Offsites and Logistics units at OQ8, under Head of Process Engineering, Controls &amp; Safety scope, acting as team leader and single point of accountability for managing Process Engineering in Sulfur/Utilities/Wastewater &amp; Offsites and Logistics units though: (1) Leading the resolution of complex operational problems associated with process engineering at OQ8 Sulfur/Utilities/Wastewater &amp; Offsites and Logistics units, (2) Coordinate team to ensure that Management process optimization Services meets Management strategy and performance goals, and (3) Leads the development, implementation, and continuous improvement of process optimization-based activities in refinery processes; in order to ensure the safe, efficient, and reliable operation of these units, contributing to the overall performance and profitability of the OQ8 Assets.</p><p>The position will act in accordance with OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, HSE standards, Oman s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main tasks and responsibilities</p><p>Scope</p><p>The Sulfur/Amines, Utilities, Wastewater, Offsites, and Logistics units play a critical role in ensuring safe, reliable, efficient, and environmentally compliant refinery operations by supporting continuous processing, energy optimization, product handling, and environmental protection.</p><p>Accountabilities:</p><p>Plant Performance and Optimization</p><ul><li>Lead and supervise Sulfur/Amines/Sour Water, Utilities, Wastewater, Offsites and Logistics operations to ensure safe, reliable, and efficient performance.</li><li>Monitor overall unit performance, identify gaps, and drive optimization initiatives to improve reliability, throughput, and operational stability.</li><li>Ensure optimum utilization of utilities including steam, fuel gas, power, cooling water, instrument air, nitrogen, and flare systems.</li><li>Lead troubleshooting activities for recurring operational and reliability issues.</li><li>Coordinate with Operations, Maintenance, Inspection, and technical teams to minimize unit downtime and operational losses.</li><li>Ensure refinery offsites and logistics systems support continuous refinery operation without constraints.</li><li>Monitor refinery energy performance and identify opportunities for energy conservation and efficiency improvement.</li><li>Lead energy optimization initiatives across utilities and process integration systems.</li><li>Monitor key energy KPIs including Steam balance, Fuel gas consumption, Power consumption, Boiler efficiency, Steam venting and condensate recovery and Flare minimization</li><li>Support refinery energy intensity reduction and sustainability initiatives.</li></ul><p>Energy Management &amp; Utility Optimization</p><ul><li>Act as focal point for refinery energy management and utilities optimization.</li><li>Ensure efficient operation of boilers, steam systems, cooling water systems, and power generation/distribution networks.</li><li>Lead refinery-wide steam and energy balance reviews.</li><li>Identify opportunities for Heat integration improvement, Steam optimization, Fuel gas reduction, Energy recovery and Emission reduction</li><li>Coordinate implementation of energy-saving projects and monitor achieved benefits.</li><li>Support energy benchmarking activities against industry standards and best practices.</li><li>Ensure optimization of sulfur recovery and amine systems to minimize operational losses and environmental impact.</li></ul><p>Safety, Environmental &amp; Regulatory Compliance</p><ul><li>Ensure all units operate in compliance with company HSE standards and environmental regulations.</li><li>Ensure safe operation of sulfur recovery, flare, wastewater, and utility systems to minimize environmental impact.</li><li>Support and participate in HAZOP, PSSR, HAZID, SIL reviews, Risk assessments and Incident investigations</li><li>Ensure implementation and compliance with operating procedures, standards, and management of change (MOC) requirements.</li><li>Lead initiatives related to flare reduction, emissions control, sulfur recovery efficiency, and wastewater compliance.</li><li>Ensure refinery wastewater treatment systems meet environmental discharge requirements.</li></ul><p>Technical &amp; Engineering coordination</p><ul><li>Provide technical direction and guidance to engineers and operations teams.</li><li>Review and endorse major technical studies, process modifications, and optimization proposals.</li><li>Coordinate with Engineering and Project teams during design modifications, commissioning, and startup activities.</li><li>Ensure technical integrity of utility, sulfur complex, wastewater, and offsites systems.</li><li>Support development of operating philosophies, control strategies, and performance monitoring systems.</li><li>Review major process engineering recommendations and ensure alignment with operational objectives.</li></ul><p>Projects, Improvement &amp; Strategic Planning</p><ul><li>Lead continuous improvement initiatives to enhance safety, reliability, operability, and energy efficiency.</li><li>Support refinery expansion, debottlenecking, and revamp projects related to utilities, sulfur, wastewater, and offsites facilities.</li><li>Participate in refinery strategic planning and long-term capacity improvement studies.</li><li>Ensure lessons learned and best practices are implemented across all responsible units.</li><li>Drive digitalization and performance monitoring initiatives for utilities and offsites systems.</li></ul><p>Leadership &amp; Team Management</p><ul><li>Lead and develop a high-performing multidisciplinary team.</li><li>Set team objectives and monitor performance against KPIs.</li><li>Ensure competency development, coaching, and succession planning within the team.</li><li>Promote strong coordination between Operations, Maintenance, Inspection, Process Engineering, and HSE teams.</li><li>Support effective communication and alignment across refinery departments.</li><li>Manage contractors and external technical support activities related to responsible areas.</li></ul><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Qualifications for this position are an Engineering degree preferably in Chemical Engineering.</p><p>Professional Engineer (PE) certification preferred.</p><p>Excellent knowledge of written, read, and spoken English (required)</p><p>10+ years of total experience within the Oil &amp; Gas / Refinery / Petrochemical industry, with a minimum of 3 years of relevant experience in a similar role</p><p>Experience with Sulfur/Utilities/Wastewater &amp; Offsites and Logistics units.</p><p>Expertise in process simulation software and modelling techniques.</p><p>Proven record in leading HAZOP studies and process optimizations.</p><p>Demonstrated leadership impact to deliver improved and sustained performance.</p><p>Proven experience with Personal Safety Management.</p><p>Refinery commissioning and start-up experience.</p><p>Proven Emergency Response experience.</p><p>Experience is Process Simulation tools like HYSYS, PetroSIM etc.</p><p>Supervisory skills.</p><p>Strong Communication skill verbal and written.</p><p>Personal and Team Accountability</p><p>Accurate Reporting skills</p><p>Effective planning and organizing skills.</p><p>Proficient at interpreting Technical Drawings</p><p>Critical Thinking Skills</p><p>Result orientation</p><p>Planning and Organizing</p><p>Decisiveness</p><p>Exercising influence</p><p>Demonstrated ability to cooperate with and influence peers.</p><p>Computer literacy including MS Office applications.</p><p>Knowledge of refinery operations, industry standards, and best practices.</p><p>Proficient in interpreting PFDs, P&amp;IDs, technical drawings, and SOPs.</p><p>Good knowledge of Sulfur, Utilities, Wastewater, and Offsites systems.</p><p>Knowledge of energy management and utilities optimization.</p><p>Experience in process simulation tools such as Aspen HYSYS, Aspen Plus, or Petro-SIM.</p><p>Strong analytical, troubleshooting, and problem-solving skills.</p><p>Good understanding of HSE requirements and Safety Critical Equipment (SCE).</p><p>Knowledge of estimating, budgeting, and cost control.</p><p>Experience in refinery commissioning, startup, shutdown, and optimization activities.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To provide guidance, insights, and execute with autonomy, the refinery hydrocarbon accounting and reconciliation. This is achieved by practicing defined strategies, plans, and programs for the end-to-end process of comparing and reconciling the production of refinery hydrocarbons among the parties involved in production and sales under the purview of Hydrocarbon Accounting leadership. The individual will act as the Subject Matter Expert for HCA Refinery accounting reconciliation, including measurement, data collection, validation, reconciliation, and reporting.</p><p>1) Provide guidance and insights and ensures that hydrocarbon accounting procedures and reports are prepared accurately and according to agreed schedules. Additionally, conducts routine reconciliation of production and off-take satisfactorily in liaison with reconciliation engineers, Production Planning, Scheduling, and the Financial Accounting team.</p><p>2) Provide guidance and insights while developing strategies for Fuel &amp; loss accounting in accordance with high management performance standards, focusing on control/reduction planning.</p><p>3) Offers guidance for Refinery Production Accounting, including the formulation and drafting of Crude processing and finished product mass balance reports to provide qualitative input to stakeholders.</p><p>4) Provide guidance, insights, and data field analysis to address production difficulties effectively.</p><p>5) Execute the reconciliation of hydrocarbon production data with third parties, ensuring alignment with production targets while tracking and controlling production.</p><p>6) Manage the accounting of Intra-plant &amp; Intercompany streams within Group companies.</p><p>7) Guide and coach younger staff in HCA Refinery Reconciliation processes, identifying potential losses or discrepancies in the production and sales process, implementing corrective actions to prevent future losses, improve efficiency, and ensure accurate compensation for all parties involved in the production and sales chain.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by IT hardware and software platforms, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><b>Main Accountabilities</b></p><p><b>Scope Refinery Hydrocarbon Accounting and Reconciliation:</b></p><p>Develop and assess Hydrocarbon accounting procedures and ensure that accounting reports are prepared accurately and according to agreed schedules for routine production reconciliation.</p><p>Conduct off-take activities satisfactorily in collaboration with the Senior Engineer in Production Planning, Scheduling, and Finance Accounting.</p><p>Devise strategies for fuel &amp; loss accounting in alignment with Heat-mass balance (HMB) standards and plan for control/reduction.</p><p>Formulate &amp; draft crude processing and finished products mass balance reports to provide qualitative input to stakeholders.</p><p>Review field data analysis to adopt plans that overcome production difficulties.</p><p>Account for the hydrocarbons produced and reconcile data with third parties while effectively tracking and controlling production to ensure meeting production targets. Handle accounting of Intra-plant &amp; Intercompany streams within Group companies.</p><p><b>General</b> Through active participations, recommend actions and manage Mass balance data to ensure the optimum use of resources.</p><p>Contribute to the achievement of the approved Performance Objectives for the Section / Department in line with the Company Performance framework</p><p><b>Data collection &amp; Master Data Validation</b></p><p>Manage and maintain the company's records of movements with the operation departments, and ensure updated changes are captured in a timely manner.</p><p>Ensure high quality data is recorded into reconciliation tools &amp; accurate mass balance information in ERP.</p><p>Manage the database and produce monthly reports of each production facilities.</p><p>Maintain database and prepare report for deferment analysis, plant production opportunity losses and related statistics.</p><p>Enable the accurate Master data management for ERP &amp; Reconciliation application.</p><p>Validate the accuracy of the data collected by comparing it to other sources of data and industry standards.</p><p><b>System development.</b></p><p>Execute hydrocarbon accounting activities and maintain the reporting system.</p><p>Ensure that product yields and quantities are continuously monitored, analysing performance deviations, and initiating investigations for any deviations. Determine corrective actions as necessary.</p><p>Prepare internal and external daily and monthly management production reports, ensuring that the required report quality is achieved and that reports are issued in an effective and timely manner.</p><p>Prepare various ad hoc reports related to hydrocarbon deliveries and inventory.</p><p>Conduct daily analysis of production, identifying production losses, and highlighting production optimization opportunities.</p><p>Administer procurement and sales contracts related to hydrocarbon accounting activities.</p><p>Reconcile accounts and generate various reports related to refined product exports.</p><p>Perform necessary month and year-end closing activities.</p><p>Analyse the Process historian data for movement reconciliation.</p><p>Facilitate hydrocarbon accounting auditing and provide all required inputs as requested.</p><p>Provide input for monthly performance monitoring reviews (PMR), follow up on observations, and close out any identified gaps</p><p><b>Supervision</b></p><p>Provide opportunities for training and development of employees under his/her direction, assess their progress and suggest gap closing program</p><p><b>Policies, Systems, Processes &amp; Procedures</b></p><p>Implement approved Section / Department policies, processes, systems, standards, and procedures to support execution of the Section s / Department work programs in line with Company and International standards.</p><p><b>Innovation and Continuous Improvement</b></p><p>Design and implement new tools and techniques to improve the quality and efficiency of operational processes.</p><p>Identify improvements in internal processes against best practices in pursuit of greater efficiency in line with international standards to define intelligent solutions for issues confronting the function.</p><p>Review of system Validation, Process control &amp; bringing more Automation, Dashboard reporting.</p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Education requirements</b> Minimum Qualifications for this position are bachelor s degree in chemical engineering or similar</p><p><b>Language</b> Excellent knowledge of written, read, and spoken English (required)</p><p><b>Background and experience</b></p><p><b>Competencies and skills</b></p><p>8+ years of relevant experience</p><p>Demonstrated experience in the Oil &amp; Energy sector, with emphasis in Downstream (Refinery Operations &amp; Processes)</p><p>Experience in reading and analyse benchmarking activities</p><p>Process Reconciliation Tools. (Preferably Sigmafine)</p><p>Process Historian, IT interfaces</p><p>Hydrocarbon Contract management,</p><p>Performance analysis, assessment with Analytical &amp; Reporting tools (SAP - BW/BI, Power BI)</p><p>Project management</p><p>Financial advice and support to business projects</p><p>Have a sound knowledge of API / ASTM standard for the quantity conversion.</p><p>Have a sound knowledge of SAP transactions, Product pricing, Production cost accounting &amp; gross margin analysis.</p><p><b>Soft:</b></p><p>Detailed oriented with a self-starter attitude.</p><p>Excellent Organization and time management</p><p>Result oriented.</p><p>Communication skill verbal and written</p><p>Detailed Analytical &amp; Accurate Reporting skills</p><p>Personal and Team Accountability</p><p>Decisiveness</p><p>Problem Solving Skills</p><p>Work Prioritization, Planning and Organizing</p><p>Ability to work under pressure and handle sensitive/critical issues effectively.</p><p><b>Technical:</b></p><p>Strong computer skills, including proficiency in Microsoft Word, Excel, Vision, and PowerPoint</p><p>Excellent writer (technical and non-technical)</p><p>Application Knowledge for HCA accounting &amp; reconciliation,</p><p>Knowledge of ERP configuration, ERP transactions, rules, and regulations</p><p>Knowledge of Policies &amp; Procedure of business process management</p><p>Knowledge of Laboratory Processes.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br>Under direct supervision, trains and becomes familiar with the chemical hygiene plan and the current HSE laboratory safety standards. Follows prescribed safety rules and regulations in performing assigned duties. Performs duties to conduct prototype or laboratory tests following prescribed procedures. Learns to build equipment and/or perform basic material or environmental tests using basic techniques with electrical/electronic, chemical, and mechanical equipment. Learns to document test data for reporting purposes. Maintains files and documentation related to test equipment and test results of equipment. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Skills typically through eight (8) hours of college chemistry (preferred).<br><br><b>Qualifications</b> <br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Str 2316, Bdg 65, Assarain Bdg,&nbsp;Muscat,&nbsp;Muscat,&nbsp;, Oman</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210945&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Entry-Level&nbsp;<br><strong>Job Family:</strong>&nbsp;Engineering/Science/Technology&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Baroid&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<p>Shutdown openings for "Lifting Specialist OPAL Approved - Oman Location!!!</p><p>Dear Candidates, Greetings from AMExemplar Services !!!</p><p>We have openings for our prestigious client in Oman; they have openings for Lifting Specialist OPAL Approved Oman Location</p><p>PLEASE NOTE:-</p><p>1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY.</p><p>2) OPAL APPROVED LIFTING SPECIALIST IS A MUST.</p><p>3) BELOW FULL JOB DESCRIPTION FOR YOUR REFERENCE.</p><p>4) SHUTDOWN EXPERIENCE IS A MUST</p><p>If interested, please send CV &amp; documents on EMAIL_ADDRESS</p><p>Please provide below details:-</p><p>Current Company:-</p><p>Current Location:-</p><p>Current Salary:-</p><p>Expected Salary:-</p><p>Total years of Exp:-</p><p>No of years Gulf Exp:-</p><p>Are you Opal Approved(Yes/No):-</p><p>No of shutdown done:-</p><p>Notice Period:-</p><p>Passport number:-</p><p>Highest Qualifications:-</p><p>Age:-</p><p>Below is the open positions: -</p><p>1) Lifting Specialist.</p><p>a) Degree / Diploma in Mechanical Engineering.</p><p>b) Valid OPAL certification as a Lifting Appointed Person.</p><p>c) Minimum 10 years of relevant experience as a Lifting Specialist/Lifting Appointed Person in the oil &amp; gas, LNG, or petrochemical industry, with substantial experience in GCC projects and operating facilities.</p><p>d) Proven experience in preparing lifting studies, method statements, and lifting plans for routine and non-routine lifting activities.</p><p>e) Sound knowledge of international lifting standards, lifting equipment, rigging practices, and safety requirements.</p><p>f) Develop and implement lifting plans for Routine Lifts and Non-Routine Simple Lifts in accordance with the approved OLNG lifting plan format and procedures.</p><p>g) Execute, monitor, and directly supervise all lifting and hoisting operations under the assigned scope of work.</p><p>h) Act as a competent person responsible for planning, organizing, executing, and supervising lifting activities at site while ensuring safe work practices.</p><p>i) Provide technical expertise for the execution of heavy and critical lifting operations and prepare lifting plans in compliance with OLNG requirements and applicable international standards, codes, and best practices.</p><p>j) Coordinate and oversee all rigging and lifting activities to ensure compliance with approved method statements, risk assessments, and safety procedures.</p><p>k) Assess lifting requirements for each assigned task and determine the appropriate lifting equipment, rigging arrangements, and execution methodology.</p><p>l) Coordinate with the OLNG Lifting Appointed Person for activities involving Simultaneous Operations (SIMOPS) and obtain necessary approvals.</p><p>m) Review, revise, and obtain approval for lifting plan modifications based on actual site conditions, particularly during shutdown activities, within a short time (typically 1 to 2 hours).</p><p>n) Preferably possess working knowledge and experience of Oman LNG Lifting Procedures, standards, and permit-to-work requirements.</p><p>Please inform your friends &amp; colleagues for the same.</p><p>Warm Regards,</p><p>Vinayak Thakkar - Assistant Manager - Recruitment</p><p>AMExemplar Services</p><p>Branches: - Surat (HO) | Navi Mumbai | Oman | UAE</p><p>Tel: - +91 22 PHONE_NUMBER4</p><p>Mobile: - PHONE_NUMBER</p><p>Email id: - EMAIL_ADDRESS</p><p>Website: - www.exemplarworld.com</p><p><strong>Desired Candidate Profile</strong></p><p>1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY.</p><p>2) OPAL APPROVED LIFTING SPECIALIST IS A MUST.</p><p>3) BELOW FULL JOB DESCRIPTION FOR YOUR REFERENCE.</p><p>4) SHUTDOWN EXPERIENCE IS A MUST</p><p>a) Degree / Diploma in Mechanical Engineering.</p><p>b) Valid OPAL certification as a Lifting Appointed Person.</p><p>c) Minimum 10 years of relevant experience as a Lifting Specialist/Lifting Appointed Person in the oil &amp; gas, LNG, or petrochemical industry, with substantial experience in GCC projects and operating facilities.</p><p>d) Proven experience in preparing lifting studies, method statements, and lifting plans for routine and non-routine lifting activities.</p><p>e) Sound knowledge of international lifting standards, lifting equipment, rigging practices, and safety requirements.</p><p>f) Develop and implement lifting plans for Routine Lifts and Non-Routine Simple Lifts in accordance with the approved OLNG lifting plan format and procedures.</p><p>g) Execute, monitor, and directly supervise all lifting and hoisting operations under the assigned scope of work.</p><p>h) Act as a competent person responsible for planning, organizing, executing, and supervising lifting activities at site while ensuring safe work practices.</p><p>i) Provide technical expertise for the execution of heavy and critical lifting operations and prepare lifting plans in compliance with OLNG requirements and applicable international standards, codes, and best practices.</p><p>j) Coordinate and oversee all rigging and lifting activities to ensure compliance with approved method statements, risk assessments, and safety procedures.</p><p>k) Assess lifting requirements for each assigned task and determine the appropriate lifting equipment, rigging arrangements, and execution methodology.</p><p>l) Coordinate with the OLNG Lifting Appointed Person for activities involving Simultaneous Operations (SIMOPS) and obtain necessary approvals.</p><p>m) Review, revise, and obtain approval for lifting plan modifications based on actual site conditions, particularly during shutdown activities, within a short time (typically 1 to 2 hours).</p><p>n) Preferably possess working knowledge and experience of Oman LNG Lifting Procedures, standards, and permit-to-work requirements.</p>

<p><h4>Position description</h4> <p><strong>Reports to:</strong> Shift Team Lead OTTCO<br> <strong>Department:</strong> Maintenance & Operation Department<br> <strong>Location:</strong> Duqm & Ras Markaz</p> <h4>Job purpose</h4> <p>Performs safe, orderly and efficient panel control operations for flow regulations on reception, storage and expedition (pressure, flow, rate, reading, gauges, inspecting product) at assigned sites (Muscat / Ras Markaz / Duqm), under shift Operation Supervisor's scope, as individual contributor by:</p> <ul> <li>Controlling and regulating the pressure, flow and rate of the facility and correcting anomalies.</li> <li>Overseeing, reading, and maintaining the equipment that controls the pressure and flow of plant.</li> <li>Watching gauges, inspecting product, troubleshooting, record keeping.</li> <li>Preparing written documents for supervisors or safety inspectors to ensure products meet the required specification and contribute to regular and safest operations.</li> </ul> <p>The position will act in accordance with OTTCO's mission, vision, values and strategies, as well as policies, guidelines and international standards, supported by an IT technology platform, HSE standards, Omani government and other legal justifications, and best international practices in consonance with national objectives.</p> <h4>Reporting structure</h4> <p><strong>Number of staff supervised (direct reports):</strong> 0</p> <h4>Key responsibilities</h4> <p><strong>General:</strong></p> <ul> <li>Perform all CRO operation activities role in petrochemical terminal and hydrocarbons.</li> <li>Accept shift from previous shift panel operator with detailed log sheet of operational adjustments and changes during previous shift.</li> <li>Ensure continuity of operational issues handed over by the previous shift and take necessary action.</li> <li>Capture all major highlights and constraints experienced during the shift in the log sheet in detail for the following shift.</li> <li>Monitor unit's process performance on a continuous basis using the Distributed Control System (DCS).</li> <li>Diagnose abnormal situations and take corrective action from the control panel.</li> <li>Ensure equipment is operating within specified parameters and report serious operational deviations to the Shift Team Leader.</li> <li>Review and compare outside log sheet readings at regular intervals with the control room instrumentation readings and ensure they correlate.</li> <li>Review laboratory sample analysis results by referring to Laboratory Information Management System updates and make necessary adjustments of the control panel instruments.</li> <li>Ensure Shift Team Leader is fully informed on all related aspects and obtain guidance when necessary.</li> <li>Control operating plant start-ups, shutdowns, and emergencies by alterations of speed, temperature, pressure and flow rates as necessary.</li> <li>Facilitate the shutdown and start-up for turnaround, maintenance and inspection purposes with adherence to the Standard Operating Procedures (SOP).</li> <li>Implement emergency procedures as dictated by the circumstances and SOPs.</li> <li>Contribute to the integrity of the organisation structure through constructive feedback.</li> <li>Contribute to improving processes and procedures within the department in conjunction with Team Leader.</li> <li>Adhere to Standard Operating Procedures and instructions received from Shift Team Leader in coordination with the Field Operator.</li> <li>Maintain log sheets and logbooks reporting the highlights of daily shift work.</li> <li>Record safety incidents (near misses, observations, incidents).</li> <li>Provide input into the weekly or monthly reports if required by the Area Department.</li> <li>Maintain continuity of panel operation and close all critical issues scheduled for the allocated shift.</li> <li>Communicate and correct process quality problems.</li> <li>Participate in Process Safety Management (PSM) activities.</li> <li>Effectively interact with all levels of employees, clients and vendors.</li> <li>Support unit turnarounds including work list identification/justification, procedure writing, procedure review and equipment inspection.</li> <li>Troubleshoot process operations, communicate and correct process quality problems.</li> <li>Perform other related duties or assignments as directed.</li> <li>Familiarize with QHSE policies, objectives, procedures and its record maintenance.</li> <li>Maintain awareness of significant environmental aspects, health and safety hazards, related actual and potential aspects and risks associated with their risk.</li> <li>Maintain awareness of emergency preparedness and response measures.</li> <li>Maintain awareness of implications of not conforming to the integrated management system requirements, including not fulfilling the organization's compliance obligations.</li> </ul> <h4>Qualifications & experience</h4> <p><strong>Minimum qualifications:</strong> Diploma in Petrochemical or Oil / Gas or equivalent.</p> <p>Excellent knowledge of written, read, and spoken English (required). Arabic - native (desirable).</p> <p><strong>Experience and background:</strong></p> <ul> <li>5-7 years of experience in hydrocarbons refining, petrochemical, process engineering or related industry.</li> <li>Relevant experience in the Oil & Gas / Refinery / Petrochemical industry with experience in Jetty / Tank Farm / Gantry units.</li> <li>Knowledge of fuel sector equipment.</li> <li>Knowledge of the refinery's offsite facilities and procedures.</li> </ul> <p><strong>Skills:</strong></p> <ul> <li>Good functional knowledge of DCS.</li> <li>Good knowledge of relevant operations, HSE requirements, Oil/Gas process and systems procedures and practices.</li> <li>Ability to perform as a team player.</li> <li>Self-motivated and dependable, demonstrating strong initiative.</li> <li>Ability to deal with change and demonstrate flexibility as required.</li> </ul> <h4>Key interactions</h4> <p><strong>Internal:</strong> Department Managers, Operations Shift Staff, SCM, TSD, Maintenance, HSE, Fire</p> <p><strong>External:</strong> OQ, SIPC, Surveying Companies, ROP and Civil Defence, gas companies, other contractors and suppliers as required.</p> <h4>Notable working conditions</h4> <p>Field operations and office environment, moderate to intensive computer screen use.</p></p><p></p>

<p>Optimize the machine settings to ensure that the highest quality is produced at the maximum output. Carry out product changeover and strictly adhere to the process specification sheets for each product. Record all machine settings as required and carry out a shift turnover to the incoming operators. Follow the Daily Production Schedule as prepared by the Production Planner. Troubleshoot sheet faults. Report any damage or misuse of equipment and will always ensure that the equipment is operated in a safe manner. Ensure that the equipment is run with all machine guards in working order and fully functional at all times.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in Mechanical Engineering</li><li>Prefer who have experience in Petrochemical / PET sheet/resin plant.</li><li>English language ability required</li><li>Priority to the Dhofar Region.</li></ul><p>Note: Those jobs are under MoL wage support.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We're Hiring: Branch Sales Executive | AKG Hardware</p><p>Are you passionate about sales and building strong customer relationships? Join AKG Hardware and be part of a growing team dedicated to delivering quality services and premium construction chemicals and superb tiling solutions.</p><p>Key Responsibilities:</p><p>• Achieve branch sales targets and drive business growth.</p><p>• Assist customers in selecting the right products and provide excellent service.</p><p>• Prepare quotations, process POS orders, and coordinate timely deliveries.</p><p>• Build and maintain relationships with contractors, retailers, and other customers.</p><p>• Identify new business opportunities and support branch operations.</p><p>Requirements:</p><p>• Bachelor’s degree in construction chemicals or a related field.</p><p>• 2–5 years of sales experience, preferably in construction chemicals, tiling solutions or construction products.</p><p>• Strong communication, negotiation, and customer service skills.</p><p>• Proficiency in MS Office; ERP/POS experience is an advantage.</p><p>If you're a motivated sales professional looking to grow your career with a dynamic organization, we'd love to hear from you.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Strong communication, negotiation, and customer service skills</p></div>

<p>Conduct quality control inspections of welds, materials, and equipment in accordance with Aramco's standards and specifications. Identify defects or non-conformities and recommend corrective actions to ensure compliance with QA/QC requirements. Collaborate with production teams to resolve issues related to welding processes, material selection, and fabrication techniques. Develop and maintain documentation for inspection records, reports, and certifications.</p><p><strong>Desired Candidate Profile</strong></p><p>5-10 years of experience in oil &amp; gas industry as an EI (Engineering Inspection) QC Inspector or similar role. Strong knowledge of QA/QC principles, practices, and procedures in the petrochemical sector. Proficiency in PDO (Petroleum Development Overseas) standards and regulations applicable to oil &amp; gas projects. Experience with welding inspection methods, including visual examination, testing, and documentation.</p>