Planning Engineer Jobs in Oman

<p><h4>Location</h4> <p>Sohar, Oman</p> <h4>Work status</h4> <p>Resident (5 days per week)</p> <h4>Start date</h4> <p>July 2026</p> <h4>Service duration</h4> <p>12 months (renewable)</p> <h4>Qualification</h4> <ul> <li>LNG project experience is a must</li> <li>Process/Chemical engineer with proven experience (more than 10 years) in gas treatment and/or LNG plants detailed design, including licensors</li> <li>Professional experience: several years of proven experience in EPSCC and operation stages of gas treatment projects, including process simulation</li> <li>Strong teamwork and communication skills</li> <li>Knowledge of project development and methods used to submit dossier to state expertise, permitting process, and technical approval</li> <li>Fluent in English</li> </ul> <h4>The service holder is accountable for</h4> <ul> <li>The performance of the LNG plant process in continuity with the detailed engineering results</li> <li>The control of eventual shareholder technical support (cryogenic expert and AGRU licensed expert)</li> <li>Frequent technical alignment between start-up team and field operation when relevant</li> <li>Communication to shareholders for process matters related</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Civil Engineer to oversee and verify civil works for a Combined Cycle Gas Turbine (CCGT) power plant during construction and pre-commissioning. The role ensures compliance with drawings, specifications, ITPs, method statements, and applicable standards, with a strong focus on quality, safety, and timely delivery. You will work closely with the EPC/Contractor, Owner s Engineer, and HSE teams to ensure all civil and structural works meet project requirements. Manage and oversee all civil engineering activities on site related to Open/Close Cycle Gas Turbine (OCGT/CCGT) projects and Substation Projects. Ensure compliance with design specifications and regulatory requirements. Coordinate with project managers, engineers, Owner and contractors to ensure smooth project execution. Supervise site preparation, foundation construction, structural works, and infrastructure development. Conduct regular inspections to monitor progress, quality, and safety standards. Address technical queries and provide solutions to any civil engineering challenges encountered during construction. Collaborate with stakeholders to optimize project outcomes and mitigate risks. Prepare regular progress reports and documentation for project milestones.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in civil engineering or related field. 4-8 years of experience in civil engineering roles with a focus on Open Cycle Gas Turbine (OCGT) projects. Strong understanding of civil engineering principles, construction methodologies, and materials. Knowledge of regulatory requirements and safety standards applicable to Open/Close Cycle Gas Turbine (OCGT/CCGT) projects and Substation projects. Familiarity with environmental regulations and sustainability practices in Open/Close Cycle Gas Turbine (OCGT/CCGT) projects and Substation projects.</p><p></p></section>

<p>Renardet S.A. &amp; Partners is multidisciplinary company that provides consultancy services for design, construction supervision, technical assistance and project management for infrastructural, architectural and industrial fields of work. The company has executed more than 1500 compound projects in domain of infrastructure, hydrology, structures and dams, as well as low-rise and high-rise buildings (architecture), thanks to our international experts and their expertise.</p><p>The Opportunity:</p><p>Resident Engineer (for Site Supervision Road Project)</p><p>In order to provide a quality and satisfactory service to our clients, we are looking for experts that apart from having excellent knowledge and experience in their field, also possess personal traits such as flexibility in their work environment, team work attribute as well as leadership spirit.</p><p>For a number of projects that will commence in the following months, Renardet S.A. &amp; Partners is looking to hire on a call of contract basis.</p><h2>Job Description:</h2><ul><li>Proven leadership, decision-making, and team management skills are necessary for supervising a multidisciplinary team of engineers, geologists, and inspectors.</li><li>Overseeing all construction activities for dam components, ensuring compliance with designs, specifications, and safety standards.</li><li>Provides technical guidance, resolve site specific problems, and review work plans, method statements, and materials submissions.</li><li>Manage a team of engineers and staff, coordinate with the contractors, and ensure work is completed efficiently.</li><li>Monitors project progress, assess risks, prepare a detailed progress reports, and review contractual issues like claims and variations.</li><li>acts as main point of contact with the Client, contractors, and regulatory bodies.</li><li>ensuring construction activities adhere to the project's budget and timeline.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Requirements:</h2><ul><li>Bachelor s degree in science in Civil Engineering;</li><li>Minimum of 15 years of experience in the construction supervision of roads and bridges.</li><li>Out of these 15 years, at least 8 years shall have been served in the capacity of Resident Engineer.</li><li>Must have at least 5 years experience in the middle east.</li><li>Proficiency in English language (spoken and written).</li></ul><p>Your CV in English language shall be sent exclusively electronically.</p><p>The shortlisted candidates will be contacted for the selection process</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for a skilled Senior Network Engineer with expertise in Cisco ACI and UCS to join our team in Muscut. The ideal candidate will have 10-15 years of experience in the automobile sector, with a strong background in network infrastructure design, implementation, and management. Roles and Responsibility Design, implement, and manage network infrastructure using Cisco ACI and UCS technologies. Configure and troubleshoot Cisco Nexus switches, routers, and firewalls to ensure high availability and performance. Develop and maintain documentation for network architecture, topology, and configurations. Collaborate with cross-functional teams to identify and resolve complex network issues. Provide technical guidance and support to junior engineers on network design and implementation best practices. Ensure compliance with industry standards and best practices for network security, scalability, and reliability.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Strong knowledge of Cisco ACI, UCS, Nexus, Data Center, DCNM, VXLAN, EVPN, Spine Leaf, and Fabric technologies. Experience with Cisco Switching, Routing, and Data Center Network design and implementation. Excellent problem-solving skills and ability to analyze complex network issues and develop creative solutions. Strong communication and collaboration skills, with the ability to work effectively with cross-functional teams. Ability to work in a fast-paced environment with multiple priorities and deadlines. Strong understanding of network security principles and protocols, including firewall configuration and management. Gender: Male.</p><p></p></section>

<p>Our client is one of the leading providers of Information and Communication Technology (ICT) to service providers currently looking for Automated Operations Engineer (1st Level Operations Telecommunication Managed Services) We are now looking for an Automated Operations Engineer within the Managed Services Ist-level Operations organization that will support the realization of solutions by providing specialized technical expertise on intelligent network systems. As an Automated Operations Engineer, you will be involved in crafting schema objects (facts, attributes, hierarchies, transformations) to develop application objects. You will also craft and create Bl reports and dashboards, write scripts and programs to automate manual work, and improve operations. This role involves maintaining, debugging, troubleshooting systems and software to ensure maximum efficiency.</p><p>Duties &amp; Responsibilities:</p><ul><li>Be responsible for real-time monitoring alarms and performance information on a 24x7 basis</li><li>Perform initial analysis to identify issues follow by restoration if possible (1st line of Support)</li><li>Perform detection, classification, correlation, and accurate escalation of network incidents according to the agreed escalation matrix.</li><li>Being able to work with a variety of tools</li><li>Be able to perform Alarm Surveillance, Trouble T-icket Management, Change Management Support for 1st Level Service Restoration Activities.</li><li>Be able to manage complaints from Customer Care.</li><li>Be able to ensure Adherence to all Processes.</li><li>Be responsible to escalate within the department / group as well as to service support units (ASP) / supplier partner functions so that service layer may be maintained at specified level.</li><li>Be able to execute Front office activities and routines according to schedules defined by Shift Team Leaders/NOC Manager.</li><li>Be able to send/receive/follow up with trouble reports sent to the delivery units/supplier/customer.</li><li>Be responsible for Remote Service Corrective, Preventive Maintenance.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Electrical Engineering / Telecommunication Engineering / Computer Science / Computer Engineering or equivalent.</li><li>Minimum 2-4 years of experience in Operation &amp; Maintenance implementation, Fault management/ performance management</li><li>Must have experience in working on UOC OSS tools</li><li>Good Multi-Vendor System knowledge</li><li>Proficient command of English is required</li><li>Experience in Performance KPls &amp; CEM KQls will be plus</li><li>Hands-on experience in automation will be advantageous</li><li>Monitoring of all alarms on RAN, Transmission, Core via NMS Nodes when required.</li></ul><p>Professional/Technical Competencies:</p><ul><li>Proficient knowledge of Access, Core, and IP/Transport Networks</li><li>Must be skilled in the network topology, its traffic handling capabilities and traffic characteristics.</li><li>Efficient knowledge of network performance/configuration parameters and their interpretation and use is critical.</li><li>Must be network service/performance focused</li><li>Adept expertise in network operation processes and interfaces</li><li>Advanced knowledge of operating network implementation/integration processes</li><li>Experience in the field of Mobile Network O&amp;M is essential</li><li>Agility and the vigor to work optimally in a fast-paced environment</li><li>The ability to direct a team and do optimum shift workload distribution</li></ul>

<p>We are seeking a highly motivated and experienced Mechanical Engineer with a strong background in MEP/HVAC sales, estimation, and tendering. The successful candidate will play a key role in preparing competitive bids, managing tender submissions, and supporting business development for major commercial, industrial, healthcare, and residential projects across Oman. Review tender documents, drawings, specifications, BOQs, and contract conditions. Prepare accurate quantity take-offs and detailed cost estimates for MEP works. Coordinate with engineering, design, procurement, and project teams during the tendering process. Obtain and evaluate quotations from suppliers and subcontractors. Prepare commercial and technical proposals, bid documentation, and tender submissions. Analyze project risks and identify value-engineering opportunities to improve project competitiveness. Participate in pre-bid meetings, technical clarifications, and site visits where required. Coordinate with clients, consultants, and internal stakeholders throughout the tendering process. Support order finalization and ensure a smooth handover to the project execution team. Maintain cost databases, supplier information, and market pricing for future tenders. Monitor market trends and contribute to business development initiatives.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelors degree in mechanical engineering.</li><li>Proven experience in MEP/HVAC sales, estimation, and tendering.</li><li>Strong knowledge of HVAC, plumbing, fire protection, and electrical systems.</li><li>Experience in preparing competitive tenders for large-scale projects.</li><li>Good understanding of FIDIC contracts and GCC construction practices is preferred.</li><li>Proficiency in Microsoft Office, AutoCAD, and estimation tools.</li><li>Knowledge of Revit/BIM will be an added advantage.</li><li>Excellent communication, negotiation, analytical, and presentation skills.</li><li>Ability to work independently and manage multiple tenders within strict deadlines.</li></ul>

<p>We are looking for an experienced Senior Engineer – HVAC Tendering & Estimation to support the preparation of competitive tenders and cost estimates for commercial, industrial, healthcare, and residential projects. The successful candidate will be responsible for reviewing tender documents, preparing accurate cost estimates, coordinating with MEP disciplines, and ensuring timely submission of technical and commercial proposals.</p><br><ul><li><p>Review tender documents, BOQs, drawings, specifications, and contract conditions.</p></li><li><p>Prepare quantity take-offs and detailed HVAC cost estimates.</p></li><li><p>Prepare technical and commercial proposals for tender submissions.</p></li><li><p>Obtain and evaluate quotations from suppliers and subcontractors.</p></li><li><p>Coordinate with engineering, procurement, and other MEP disciplines during the tendering process.</p></li><li><p>Analyze project risks and identify value engineering opportunities.</p></li><li><p>Participate in pre-bid meetings, technical clarifications, and site visits.</p></li><li><p>Prepare bid analysis and cost comparison reports for management.</p></li><li><p>Maintain cost databases, supplier pricing, and market information.</p></li><li><p>Support project handover to the execution team after order finalization.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Mechanical Engineering.</p></li><li><p>10–12 years of experience in HVAC tendering and estimation for MEP projects.</p></li><li><p>Middle East/GCC experience is preferred.</p></li><li><p>Strong knowledge of HVAC systems, quantity surveying, BOQs, and cost estimation.</p></li><li><p>Familiarity with FIDIC contracts and GCC construction practices.</p></li><li><p>Proficiency in Microsoft Excel, MS Office, and AutoCAD. Knowledge of Revit/BIM is an added advantage.</p></li><li><p>Strong analytical, commercial, negotiation, and communication skills.</p></li><li><p>Ability to manage multiple tenders and meet strict submission deadlines.</p></li></ul><p><strong>Preferred Project Experience:</strong></p><ul><li><p>Commercial Buildings</p></li><li><p>Industrial Facilities</p></li><li><p>Hospitals</p></li><li><p>Residential Developments</p></li><li><p>Large-Scale HVAC/MEP Projects</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What if you could shape a career as unique as you? At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons.</p><p>Manage and oversee engineering projects from inception to completion. Develop project plans, schedules, and budgets, ensuring adherence to timelines and budgetary constraints. Coordinate with project stakeholders, including clients, contractors, architects, and regulatory agencies. Conduct regular site visits to monitor progress, quality of work, and adherence to safety protocols. Address any site-related issues promptly, providing technical guidance and solutions as necessary. Ensure compliance with relevant building codes, regulations, and environmental standards. Review project designs, specifications, and drawings to ensure accuracy and feasibility. Provide input during the design phase to optimize construction processes and materials selection. Collaborate with design teams to resolve any design-related issues or modifications.</p><p>Quality Assurance/Quality Control (QA/QC): Implement QA/QC procedures to ensure construction work meets established standards and specifications. Conduct inspections and tests to verify the quality of materials and workmanship. Document and report any non-conformities or deviations, and work towards timely resolution.</p><p>Work closely with architects, structural engineers, and other professionals to coordinate interdisciplinary aspects of projects. Foster a collaborative and positive work environment, encouraging effective communication and teamwork. Provide mentorship and support to junior engineers and site staff as needed.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Civil Engineering or related field. Master's degree preferred. Professional Engineer (PE) license or eligibility for licensure. Proven experience in Electrical engineering, with a focus on site management and construction. Strong knowledge of construction methods, materials, and techniques.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons. As a Graduate Engineer Electrical, you will be responsible for overseeing various construction projects, ensuring adherence to design specifications, safety standards, and project timelines.</p><p>Manage and oversee engineering projects from inception to completion. Develop project plans, schedules, and budgets, ensuring adherence to timelines and budgetary constraints. Coordinate with project stakeholders, including clients, contractors, architects, and regulatory agencies. Conduct regular site visits to monitor progress, quality of work, and adherence to safety protocols. Address any site-related issues promptly, providing technical guidance and solutions as necessary. Ensure compliance with relevant building codes, regulations, and environmental standards. Review project designs, specifications, and drawings to ensure accuracy and feasibility. Provide input during the design phase to optimize construction processes and materials selection. Collaborate with design teams to resolve any design-related issues or modifications. Quality Assurance/Quality Control (QA/QC): Implement QA/QC procedures to ensure construction work meets established standards and specifications. Conduct inspections and tests to verify the quality of materials and workmanship. Document and report any non-conformities or deviations, and work towards timely resolution. Work closely with architects, structural engineers, and other professionals to coordinate interdisciplinary aspects of projects. Foster a collaborative and positive work environment, encouraging effective communication and teamwork. Provide mentorship and support to junior engineers and site staff as needed.</p><p>Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Electrical Engineering or related field. Master's degree preferred. Professional Engineer (PE) license or eligibility for licensure. Proven experience in Electrical engineering, with a focus on site management and construction. Strong knowledge of construction methods, materials, and techniques.</p><p></p></section>

<p>The Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases. Procurement Coordination Obtain quotations from suppliers and subcontractors. Evaluate supplier offers technically and commercially. Negotiate prices to achieve competitive costing. Prepare comparison statements. Recommend suitable vendors. Tender Documentation Prepare complete tender submissions. Compile compliance statements. Prepare technical submittals. Prepare deviations and clarification documents. Assist in pre-qualification documentation. Client Coordination Attend pre-bid meetings. Conduct site visits before tender submission. Clarify technical queries with consultants and clients. Respond to tender clarifications. Project Handover to execution team Hand over awarded projects to the execution team. Explain estimation assumptions and exclusions. Support procurement during project execution. Cost Control Monitor estimated vs. actual project costs. Maintain cost history for future estimates. Identify opportunities for cost reduction.</p><p><strong>Desired Candidate Profile</strong></p><p>Need Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a motivated and enthusiastic Fresh Electrical Engineer to join our team. The ideal candidate should have a strong interest in sustainable energy technologies, particularly Solar PV, Wind Energy, and other renewable energy systems s well as environmental services and consultancy practices.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Electrical Engineering</li><li>Basic knowledge of renewable energy systems and technologies</li><li>Familiarity with renewable energy design and simulation software, such as: PVsyst, HOMER Pro,..etc</li><li>Good technical writing and report preparation skills</li><li>Strong communication skills in English</li><li>Self-motivated, hardworking, and willing to learn</li><li>Ability to work effectively both independently and within a team</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons. Project Engineer who will be responsible for managing the execution of 11kV/LT projects shall undertake the following actions:</p><p>Manage &amp; supervise all distribution substation construction activities and Overhead lines /Under Ground Line works</p><p>Review and approve the construction program submitted by the contractor and coordinate with the civil engineers to comply the requirements.</p><p>Provide assistance TO CONTRACTOR to finalize any outstanding issues related to approval, construction of existing construction stations.</p><p>Issue instructions to the contractor and supervise the execution of the works in accordance with tender specification and provide monthly feedback reports of energized projects during its defect liability period</p><p>Issue weekly and monthly progress reports and other technical financial reports associated with the works.</p><p>Review contractors claim for change request (cost/time) and prepare &amp; submit relevant reports</p><p>Attend progress meetings as and when required to review progress and identify problems, if any.</p><p>Prepare &amp; Submit proposal if required any changes on scope/time/quality/technical requirements in time.</p><p>In each meeting such issues shall be escalated along with proper recommendations.</p><p>Carryout site visit/factory visit jointly on or behalf of client for inspection, testing, during manufacturing, engineering, erection, testing and commissioning and ensure completion of all punch list point if raised, categorically.</p><p>Project correspondence/documents, drawing submittal, review and reply to and from contractor:</p><p>Clearance of energization &amp; snags and ensuring project closure in all respect, including as built approvals, certification and report on lesson learnt</p><p>Study the Invoice submitted by contractor &amp; its certification</p><p>Contractor performance report &amp; other relevant reports to be submitted in time as per line manager s instruction</p><p>Site Visit reports to be submitted on time</p><p>All other works seen by the client necessary to complete the project will be part of consultant scope.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in electrical engineering or related field. Professional engineering license preferred. In-depth knowledge of electrical systems, codes, and standards. Proven experience in project management and team leadership.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide HSSE Engineering safety guidance to the logistics and transportation activities &amp; processes for RPI under TL Safety AP &amp; non Plant scope s, acting as owner of HSSE road safety engineering standards, through; (1) Assesses and continues improvement OQ road safety performance. (2) IVMS systems supervision for OQ and contractors fleet, (3) Promote road safety compliance audits and inspections, and (4) Develop and provide safe journey management support to Downstream business; in order to provide exceptional support on all HSSE logistics and transportation matters at Downstream operations.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justification s, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><p><strong>Road Safety performance management :</strong></p><ul><li>Promote road safety management awareness among company employees and contractor community drivers.</li><li>Ensure effective implementation of Road Safety Management &amp; Control Procedure is implemented in OQ RPI</li><li>Ensure road safety education to OQ RPI staff and contractors on company policies, procedures and relevant standards.</li><li>Lead and facilitate investigations of Motor Vehicle Incidents (MVIs), near misses, and Road Safety Violations.</li><li>Verifiy compliance with Safe Journey Management Systems and OQ RPI procedures as per company policies.</li><li>Conduct and lead oad traffic safety assurance audits for company and contractors community land transport and commuting and provide recommendations for continual improvement.</li><li>Oversee road safety systems regular maintenance and calibration services and coordinating with external service providers to ensure timely and effective execution.</li><li>Lead management of road safety infrastructure, including traffic signs, road markings, and speed limits.</li><li>Provide expert recommendations on road and barriers design in line with Oman Highway Design Manual, and associated industry best practices.</li><li>Identify and introduce innovative technologies and solutions to enhance company road safety performance</li><li>Lead OQ RPI fleet management contracts and procurements technical specification/evalution to ensure compliance with the approved road safety standards and specifications.</li><li>Monitor and verify compliance with OPAL road safety standard at OQ RPI.</li></ul><p><strong>IVMS, Road Safety Systems &amp; Technologies.</strong></p><ul><li>Ensure Company vehicles and contractors community are equipped with approved IVMS systems, associated ancillary devices such as GPS satellite communication tools to ensure effective tracking, and distress call feature is enabled all the time.</li><li>Ensure the electronic systems and associated devices installed in vehicles to monitor driver activities are able to identify behaviours such as excessive speed, harsh braking, rapid acceleration and fatigue assistance systems are effectively managed.</li><li>Monitor and tracks journeys in real time using IVMS live tracking systems and communication tools, ensuring vehicles safely reach their final destinations.</li><li>Maintain active communication with drivers and intervene before, during and after the journey as per the Safe Journey Management.</li><li>Initiate and lead Man Lost emergency response procedure search and rescue teams to locate the vehicle and driver.</li><li>Identify, report and coordinate resolution of any malfunction or failure of IVMS and associated devices of the company vehicles and ensuring timely repair and restoration.</li><li>Prepares and Prepare and submit the daily, weekly and monthlyreports on any non-compliance or at risk driving practices or behaviours.</li><li>Manage road safety enforcement systems, including radars, ensuring proper maintenance, calibration, and functionality.</li><li>Generate and distribute monthly IVMS performance reports for OQ RPI drivers to relevant stakeholders, including key findings and improvement actions.</li></ul><p><strong>Safe Journey Management :</strong></p><ul><li>Lead the implementation and continouns improvement of the Safe Journey Management System including the monitoring system performance and effectiveness.</li><li>Lead the engagement with internal customers, and provide technical assistance in matters related to E-Safe Journey Management System across OQ RPI Operating assets</li><li>Ensure customer &amp; drivers satisfaction, by providing exceptional, consistent services, including identification of road hazards that can be experienced on the planned routes, Vehicle inspections, weather, poor road conditions, other drivers and wildlife etc.), while measuring, monitoring and optimizing their experiences.</li><li>Ensure accurate and up to date management of driver profiles and company fleet data in the E-JMS system</li><li>To drive conformance to Journey management and challenge the noncompliance of all journeys by ensuring where possible the standards, certification and legal requirements for journey management and driving are adhered to.</li><li>Verifiy the necessity of a journey with Line Management, if required, and suggests available options for an alternative means of making the journey: by air or combined together with another Company approved vehicle etc. to ensure mileage countdowns and minimize exposure</li><li>Verifiy that all journeys are assessed correctly for risk using Companyapproved Road Journey Risk Assessment Matrix..</li><li>Verifiy that only competent and trained drivers and approved vehicles are assigned to the journeys.</li><li>Develop, review and continuously improve safe journey management procedures and associated assurance checklists.</li></ul><p><strong>Safety responsibilities :</strong></p><ul><li>Minimize incidents by proper monitoring &amp; implementation of Company s Health and Safety measures.</li><li>Conduct incident investigations (Root Cause Analysis) of all recordable incidents and near misses with high potential.</li><li>Prepare &amp; execute HSE campaigns, HSE audit / inspection schedules, HSE trainings and any other training / awareness as per safety section requirement.</li><li>Develop weekly / monthly reports / presentations with good analytics and update further as per directions from Engineers / Team Lead.</li></ul><p><strong>Key interactions</strong></p><p>Internal: Internal: RPI Department Heads, Employees.</p><p>External: External Auditors, Insurance Companies, Contractors</p><p><strong>Notable Working Conditions.</strong> Field Operations and office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum qualifications for this position is a bachelor degree in engineering and safety science or equivalent.</li><li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li><li>5-7 years Relevant experience in a similar role within the Oil and Gas industry preferable in Upstream &amp; Petroleum processes.</li><li>Fundamentals of HSE - knowledge of occupational health &amp; safety. understanding of general industry standards and the requirements of the more frequently referenced standards</li><li>Working knowledge of basic health and safety concepts such as hazard and risk assessment, personal protective equipment, Root cause analysis, behaviour-based safety, machine/ equipment safety, confined space entry among others.</li><li>Good Knowledge and experience in fleet safety management systems and IVMS specifications.</li><li>Experience in general Safety operational such as: Perform safety control programs effectively e.g. plant safety walk-through, risk assessments, field Inspections of PTW, PPEs, OMT activities, contractor activities, tools, equipment etc to control hazards.</li><li>Certified Incident Investigator preferably TapRooT RCA</li><li>Fully conversant with Oman traffic laws and regulations.</li><li>Fully conversant with OPAL Road Safety Standard.</li><li>Basic qualifications in HSE.</li><li><strong>Soft:</strong> Effective planning and organization skills, Interpersonal skills with strong customer service orientation, Acute observation and calculation skills, Forecasting abilities, Business Acumen, Negotiation, Communications, Creative work methodology, Planning and organizing.</li><li><strong>Technical:</strong> Proficiency in M/S Office, Familiarized with logistic and transportation engineering best practices, Costing and Budgeting, Technical reporting, Presentation.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>CQA Engineer responsible for independent verification and assurance that all TSF construction works are executed in accordance with Issued-for-Construction (IFC) drawings, technical specifications (both developed by WSP), and regulatory requirements. The role focuses on systematic inspection, testing verification, documentation, and management of construction quality across earthworks, lining systems, drainage, and associated infrastructure of the TSF including decant ponds, access ramps, maintenance routes, etc.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in civil / Geotechnical / Environmental Engineering Mandatory Skills: Full knowledge of the following to Independently verify construction compliance: o TSF design and construction practices o QA/QC procedures, ITPs, and standards o Geosynthetics installation and testing o Compaction and earthworks control Working knowledge of international dam and tailings standards, including ICOLD, ANCOLD, and GISTM is required</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What if you could shape a career as unique as you? </p> <p> At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons.<br> </p> <p> <span>Protection Engineer who will be responsible for managing Protection activities for projects shall undertake the following actions</span> </p> <ul> <li>Bachelor s degree in Engineering or related field.</li> <li>Professional engineering license preferred.</li> <li>In-depth knowledge of electrical systems, codes, and standards.</li> <li> <p>Proven experience in project management and team leadership. <br> </p> <p> <strong>Imagine a better future for you and a better future for us all. </strong> <br> </p> <p>Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? <br> <strong> </strong> </p> <p> <strong>With us, you can. Apply today.</strong> </p> </li> </ul> <ul> <li> <p>Conduct Witness test relay functional test for determining correct operation and sign off the relevant documents. Make appropriate recommendation/resolution for mitigation to Operations, and report to line manager.</p> </li> <li> <p>Perform system studies, provide protection requirements for design, review and sign off one-line, elementary, logic diagrams and work with other discipline engineers - substation engineers, Distribution Field engineers, project engineers, apparatus engineers - to support sub transmission and distribution substation expansion, substation automation and infrastructure replacement projects.</p> </li> <li> <p>Gather and evaluate line data of transmission, sub-transmission, distribution systems, transformer test data, switchgear date, etc. Model systems on appropriate software tool, such as CAPE, perform short circuit studies, and protection coordination studies necessary for completing relay settings, perform relay settings, prepare protection summary, and coordinate relay settings with protection departments. </p> </li> <li> <p>Issue Substation Relays and field Auto recloser settings via relevant relay database to the field, support Test technicians in-servicing or commissioning relay settings, review/approve returned as-left relay setting files, and communicate with Test technicians for making revisions/changes to relay settings as necessary.</p> </li> <li> <p>Drive, Support and Contribute to innovative projects/initiatives such as Protection impact studies due to Distributed Energy Resources (Micro grid, Battery Storage, etc.,), Downed Conductor detection, Arc flash fault duties and Grid Modernization efforts.</p> </li> <li> <p>Ability to analyse information, perform engineering assessments and evaluations and provide reports and recommendations to internal clients and project team members.</p> </li> <li> <p>Experience using application software such as Microsoft Word, Excel, PowerPoint, Access, Visio, and Project.</p> </li> <li> <p>Analyse post-fault event using historical data such as DFR traces, digital relay records, or related data.</p> </li> <li> <p>Support and Reviews advanced power system analyses.</p> </li> <li> <p>Performs field inspections and provides professional field support as necessary during construction phases.</p> </li> <li> <p>Performs investigation of material and system failures</p> </li> <li> <p>On site commissioning, testing and support</p> </li> <li> <p>Other relevant duties assigned by client. </p> </li> </ul></div></section>

<p><h4>Description</h4> <p>The role</p> <p>We are looking for a hands-on senior ML engineer to lead the development and operation of production-grade AI systems across LLMs, OCR, and voice. This role combines deep technical ownership with leadership of a high-performing team of junior engineers, as well as direct engagement with stakeholders to shape AI solutions.</p> <p><strong>Responsibilities:</strong></p> <ul> <li>Lead and mentor a team of highly talented junior ML engineers through:<br>   • Code reviews, design reviews, and technical direction<br>   • Enforcement of strong software engineering and ML best practices</li> <li>Design, deploy, and operate scalable AI systems with a focus on reliability and performance</li> <li>Lead production deployment of LLMs and multimodal systems (RAG, OCR, voice)</li> <li>Own <strong>model performance end-to-end</strong>, combining evaluation, observability, and hardware optimization:<br>   • Build evaluation pipelines (benchmarks, regression testing, LLM-as-judge)<br>   • Implement deep observability (tracing, latency, error tracking)<br>   • Optimize GPU utilization (multi-GPU serving, batching, quantization, memory tuning)<br>   • Continuously improve throughput, latency, and cost efficiency</li> <li>Architect and manage GPU infrastructure:<br>   • Model serving, load balancing, and scaling strategies<br>   • Hardware-aware deployment and performance tuning</li> <li>Build and maintain robust MLOps pipelines:<br>   • Model/version management, CI/CD, automated testing, and rollback strategies<br>   • Monitoring and feedback loops for continuous improvement</li> <li>Engage directly with clients and stakeholders to:<br>   • Gather and clarify business requirements<br>   • Translate non-technical needs into well-defined technical problems<br>   • Communicate solutions, trade-offs, and progress through clear documentation, reports, and proposals</li> <li>Contribute hands-on to system design, implementation, debugging, and production incident resolution</li> </ul> <p><strong>Requirements</strong></p> <ul> <li>Proven experience deploying LLMs in production</li> <li>Strong experience with GPU-based inference and optimization</li> <li>Solid backend engineering skills (Python, APIs, distributed systems)</li> <li>Experience with MLOps and production ML systems</li> <li>Experience with OCR/document AI and/or voice systems (STT/TTS)</li> <li>Experience with Docker and Kubernetes</li> <li>Strong understanding of modern AI architectures (RAG, vector DBs, agent workflows)</li> <li>Experience mentoring or leading engineers</li> <li>Strong communication skills with the ability to bridge business and technical domains</li> </ul> <p><strong>Nice to have:</strong></p> <ul> <li>Experience with open-weight models (Qwen, Llama, DeepSeek, Gemma)</li> <li>Experience with on-prem / sovereign AI deployments</li> <li>Experience with LoRA / fine-tuning</li> <li>Multilingual or Arabic NLP experience</li> </ul></p><p></p>

<p><h4>Description</h4> <p>The role</p> <p>We are looking for a hands-on senior ML engineer to lead the development and operation of production-grade AI systems across LLMs, OCR, and voice. This role combines deep technical ownership with leadership of a high-performing team of junior engineers, as well as direct engagement with stakeholders to shape AI solutions.</p> <p><strong>Responsibilities:</strong></p> <ul> <li>Lead and mentor a team of highly talented junior ML engineers through:<br>   • Code reviews, design reviews, and technical direction<br>   • Enforcement of strong software engineering and ML best practices</li> <li>Design, deploy, and operate scalable AI systems with a focus on reliability and performance</li> <li>Lead production deployment of LLMs and multimodal systems (RAG, OCR, voice)</li> <li>Own <strong>model performance end-to-end</strong>, combining evaluation, observability, and hardware optimization:<br>   • Build evaluation pipelines (benchmarks, regression testing, LLM-as-judge)<br>   • Implement deep observability (tracing, latency, error tracking)<br>   • Optimize GPU utilization (multi-GPU serving, batching, quantization, memory tuning)<br>   • Continuously improve throughput, latency, and cost efficiency</li> <li>Architect and manage GPU infrastructure:<br>   • Model serving, load balancing, and scaling strategies<br>   • Hardware-aware deployment and performance tuning</li> <li>Build and maintain robust MLOps pipelines:<br>   • Model/version management, CI/CD, automated testing, and rollback strategies<br>   • Monitoring and feedback loops for continuous improvement</li> <li>Engage directly with clients and stakeholders to:<br>   • Gather and clarify business requirements<br>   • Translate non-technical needs into well-defined technical problems<br>   • Communicate solutions, trade-offs, and progress through clear documentation, reports, and proposals</li> <li>Contribute hands-on to system design, implementation, debugging, and production incident resolution</li> </ul> <p><strong>Requirements</strong></p> <ul> <li>Proven experience deploying LLMs in production</li> <li>Strong experience with GPU-based inference and optimization</li> <li>Solid backend engineering skills (Python, APIs, distributed systems)</li> <li>Experience with MLOps and production ML systems</li> <li>Experience with OCR/document AI and/or voice systems (STT/TTS)</li> <li>Experience with Docker and Kubernetes</li> <li>Strong understanding of modern AI architectures (RAG, vector DBs, agent workflows)</li> <li>Experience mentoring or leading engineers</li> <li>Strong communication skills with the ability to bridge business and technical domains</li> </ul> <p><strong>Nice to have:</strong></p> <ul> <li>Experience with open-weight models (Qwen, Llama, DeepSeek, Gemma)</li> <li>Experience with on-prem / sovereign AI deployments</li> <li>Experience with LoRA / fine-tuning</li> <li>Multilingual or Arabic NLP experience</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description<br><p>Must have Skills : Python (Strong), Model Packaging &amp; Deployment (Strong), RAG Workflow (Strong), Prompt Engineering with LLMs (Strong)</p><br><p>Good To Have Skills : Vector Databases and Embeddings (Capable)</p><br><p>Job description: Generative AI developer (experience 1 to 2 years) Early-career AI/ML Engineer supporting the development and deployment of Generative AI solutions (LLMs, RAG systems). Focus on hands-on implementation, integration, and learning-by-delivery, under guidance.</p><br><p>Must Have: 1. Strong foundation in Python (data handling, APIs, scripts) 2. Understanding of APIs, Docker, or deployment workflows 3. Exposure to deploying ML/AI models (even in projects/internships) 4. Understanding of embeddings, retrieval flow 5. Hands-on exposure through projects 6. Experience working with GPT/Llama APIs 7. Ability to structure prompts and evaluate outputs 8. Vector Databases (Exposure Level) - Familiarity with FAISS / Chroma / Pinecone and basic usage in projects. 9. . ML Fundamentals: Core concepts - overfitting, evaluation metrics, basic algorithms. Ability to reason about model behavior.</p><br><p>Core Responsibilities (Execution Under Guidance) 1. Assist in building RAG-based GenAI solutions for enterprise use cases. 2. Develop Python-based services/APIs integrating LLMs. 3. Support data preprocessing, embeddings, and retrieval pipelines. 4. Contribute to model deployment and integration tasks. 5. Debug and improve existing pipelines under supervision. 6. Work closely with senior engineers to understand production constraints (latency, cost, accuracy)</p><br><p>Good to Have 1. LangChain / LlamaIndex exposure 2. Cloud basics (Azure / AWS / GCP) 3. Basic understanding of CI/CD or MLOps concepts 4. Internship/project experience in GenAI or ML use cases Experience &amp; Qualification 1. Bachelor's in Computer Science / Data Science or related field. 2. 12 years of experience in AI/ML (including internships and project work). 3. Exposure to at least one end-to-end ML/GenAI project (academic and professional).</p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Oman </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Senior Control &amp; Automation Engineer to join its Projects team focusing on delivering across FEED and Detail design scopes of work.&nbsp;<br> Position is based in Muscat, Oman</p><br><br> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>This position is responsible for the technical design and execution of qualification programs and advanced power system simulations. The role focuses on ensuring that control engineers are qualified through rigorous simulation-based assessments using the Dispatcher Training Simulator (DTS). The Principal Engineer serves as the technical expert in modeling complex grid scenarios, including renewable penetration and market dynamics, to validate operational readiness. This function bridges the gap between theoretical system studies and real-time operational certification, ensuring the LDC team is equipped to handle contingencies and maintain grid stability.</p><p>Partner with Section Heads and Managers to conduct baseline competency assessments and design tailored training programs. Leads the technical development of simulation scenarios within the Dispatcher Training Simulator (DTS) to analyze various operational contingencies and conduct in-depth studies. Designs and executes the technical framework for the authorization and certification of LDC control engineers. Analyzes the penetration and effects of renewable generation on system operation to develop simulation-based mitigation strategies. Provides expert analysis and simulation-based reconstruction of sudden grid events to support root cause analysis. Monitors application system performance and tuning parameters to ensure simulation environments accurately reflect network dynamics. Develops technical training modules for LDC staff, focusing on high-standard technical outputs and mentoring. Identifies system operation bottlenecks during simulated contingencies and provides actionable recommendations for remedial actions. Assists in analyzing the technical impacts of the Spot Market on system operations during simulation cycles. Contributes to the security measures and crash recovery processes for the DTS and other training applications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in electrical Power Engineering</li><li>Advanced certification in Power System Simulation or Dispatcher Training Environments (preferred).</li><li>Minimum of 7 years experience in large, interconnected power system operations, specifically in system studies or simulation-based training.</li></ul><p></p></section>