Mechanical Design Engineer Jobs in Oman

<p>Job title: Head of Exploration Stream: Commercial Function Exploration - Exploration New Operated Assets Location: Oman - HO Budget control: *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to : VP Exploration Direct reports: Principal Exploration Data Management Principal Geophysicist Principal Geoscientist Principal Reservoir Engineer Lead Geologist Senior Petrophysicist</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>To perform, evaluate, and report Phased Array Ultrasonic Testing (PAUT) on welded joints and critical components during offshore construction and installation activities, ensuring compliance with project specifications, applicable codes, and client requirements , while strictly adhering to offshore HSE standards.</p><h3>Key Responsibilities</h3><p>1. PAUT Inspection Activities</p><p>Perform PAUT inspections on:</p><ul><li>Offshore piping welds (CS / SS / CRA)</li><li>Structural welds and nodes</li><li>Pressure vessels and pipelines (as applicable)</li></ul><p>Ensure inspections are carried out in accordance with:</p><ul><li>Approved PAUT procedures</li><li>Inspection &amp; Test Plans (ITPs)</li><li>Offshore work packs</li></ul><p>2. Equipment Setup &amp; Calibration</p><p>Set up and calibrate PAUT equipment including:</p><ul><li>Phased array probes and wedges</li><li>Encoders and scanners (manual / semi?automated)</li></ul><p>Conduct calibration using:</p><ul><li>Approved reference blocks</li><li>Project?specific calibration standards</li></ul><p>Ensure all NDT equipment has valid calibration certificates</p><p>3. Data Acquisition &amp; Interpretation</p><p>Perform data acquisition and analysis using PAUT software</p><p>Interpret A?Scan, B?Scan, C?Scan and S?Scan data</p><p>Detect, evaluate, and size discontinuities such as:</p><ul><li>Lack of fusion</li><li>Lack of penetration</li><li>Cracks</li><li>Porosity and inclusions</li></ul><p>4. Reporting &amp; Documentation</p><p>Prepare accurate and timely:</p><ul><li>PAUT reports</li><li>Scan plans and data files</li><li>Repair and re?inspection reports</li></ul><p>Ensure full traceability of welds and inspection records</p><p>Support mechanical completion, pre?commissioning, and dossier handover</p>

<p>We are hiring an Auto Electrician for an automobile industry role. The ideal candidate should have hands-on experience in vehicle inspection, car electrician, Auto Electrician, troubleshooting, and repair . Candidates with GCC work experience and Arabic language proficiency will be preferred.</p><p>Key Responsibilities</p><ul><li>Conduct detailed inspections of vehicles to identify mechanical, electrical, and safety-related issues.</li><li>Perform preventive maintenance, servicing, and repair of cars.</li><li>Diagnose vehicle faults using modern diagnostic tools and equipment.</li><li>Inspect engine, transmission, braking, suspension, steering, electrical, and other vehicle systems.</li><li>Identify technical problems and recommend appropriate repair solutions.</li><li>Ensure all vehicles comply with required automotive safety and quality standards.</li><li>Maintain accurate inspection reports, service records, and maintenance documentation.</li><li>Coordinate with technicians and other departments to ensure timely completion of vehicle servicing.</li><li>Follow workplace safety procedures and automotive industry standards</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum 3 + years of relevant experience in automobile inspection, maintenance, servicing, or repair. Strong knowledge of Auto Electrician, diagnostics, and troubleshooting . Arabic language proficiency Speaking, Reading &amp; Writing is mandatory/preferred as per client requirement. Must possess valid educational certificates and supporting documents . Good knowledge of automotive diagnostic tools and equipment. Strong problem-solving and technical troubleshooting skills. Ability to work independently as well as part of a technical team.</p>

<p>Responsibilities Strategic Contribution Translate the approved South Cluster business plan, destination strategy and development priorities into an integrated portfolio delivery plan for Janaen Salalah, Khor Rori and other assigned projects. Act as the single accountable owner for the South portfolio across the full development life cycle, ensuring alignment of scope, cost, schedule, quality, HSE and commercial outcomes. Sponsor projects and phase releases through the applicable G0-G6 stage-gates within delegated authority, ensuring that required evidence, business cases and recommendations are robust and timely. Maintain a strong understanding of real-estate, tourism, hospitality and residential market dynamics relevant to the South portfolio and use market evidence to inform development and monetization decisions. Leadership Lead, build and develop the South Cluster delivery team, including project managers, PMO/project controls, commercial and handover resources and other assigned personnel. Set clear accountabilities, objectives and performance expectations for the cluster team and create a culture of ownership, transparent reporting, collaboration and delivery discipline. Develop Omani project leadership capability through coaching, knowledge transfer, succession planning and meaningful delegation. Organization Structure Establish and operate the approved cluster delivery blueprint, with appropriate project leadership for each asset and effective coordination with embedded or centrally deployed design and technical resources. Review portfolio resourcing requirements and recommend the optimum mix of internal resources, consultants, project managers and contractors to support efficient delivery. Budgets and Plans Own and manage approved portfolio and phase budgets, cash-flow forecasts, schedules, resource plans and delivery priorities, ensuring timely corrective action where material variances arise. Ensure portfolio financial and schedule performance is accurately forecast, monitored and reported to the Chief Development Officer and relevant governance forums. Policies, Systems, Processes &amp; Procedures Ensure consistent application of OMRAN policies, the stage-gate framework, Delegation of Authority, project controls, procurement requirements and all applicable statutory and regulatory requirements across the South Cluster. Drive disciplined reporting, risk management, change control, lessons learned and continuous improvement across the portfolio. Operational Lead delivery of the South portfolio across all active phases, with overall accountability for scope, schedule, cost, quality, HSE, risk, procurement, approvals and handover. Run the standard cluster delivery model, including project management by asset, cluster PMO/project controls, commercial and handover activities, stakeholder approvals and effective integration of central design and technical authorities. Ensure projects are delivered to Design &amp; Master Planning standards, Technical Services specifications and approved land-use/GFA parameters, including effective coordination of secondary infrastructure and utility interfaces with centrally delivered trunk infrastructure. Oversee procurement and contracting activities with Capital Procurement &amp; Contracts and the relevant Tender Committee, ensuring appropriate tender strategies, contract administration, claims avoidance and disciplined variation control. Manage the performance of project managers, consultants, designers, cost consultants and contractors, ensuring timely decisions, effective issue resolution and accountability for agreed deliverables. Provide strong commercial oversight of the portfolio, including cost management, contract administration, claims, variations, cash flow and forecast final cost, escalating material exposures in a timely manner. With Sales &amp; Leasing, shape residential villa and plot products based on market evidence, support off-plan launches and escrow compliance, ensure agreed pre-sales thresholds are achieved before construction release where applicable, and oversee customer handover. Enforce OMRAN HSE standards across all sites and ensure appropriate management of environmental, coastal, archaeological and heritage constraints, particularly at Khor Rori and other sensitive locations. Represent OMRAN with Dhofar Municipality, relevant ministries, utility providers, local authorities and the community, building effective relationships and securing the approvals and local support required for delivery. Oversee testing, commissioning, snagging, practical completion and customer/asset handover, including transfer of common areas and estate obligations to the relevant Asset Management or community-management arrangements. Coordinate with Destinations Management and other relevant functions on destination experience requirements and seasonal programming, including Khareef-related requirements where applicable. Drive Omanisation and in-country value through recruitment, capability development, contracting and supply-chain decisions across the South Cluster. Provide accurate, transparent and timely portfolio reporting, decision papers and recommendations to the Chief Development Officer and relevant management and governance committees. Key Performance Indicators Portfolio cost and schedule variance against approved business plans and phase budgets. Achievement of approved project milestones, G0-G6 stage-gates and central-function SLA requirements. HSE performance, including LTIFR and zero major safety, environmental or heritage incidents. Effective management of portfolio risks, claims, variations and forecast final cost. Timely achievement of design, technical, statutory, authority and utility approvals. Residential pre-sales thresholds, absorption pace and launch readiness achieved in accordance with approved plans, where applicable. Handover quality, including defects, close-out performance and customer satisfaction. Achievement of approved commercial and financial outcomes, including phase monetization and contribution toward infrastructure investment recovery. Consultant, contractor and project-team performance against agreed deliverables and service levels. Achievement of Omanisation, Omani talent-development and ICV targets across the cluster. Authorities Operates within the Company's Delegation of Authority and approved phase budgets, with decision-making authority across the South Cluster portfolio within delegated limits. Material changes to land use, GFA, scope, phasing, budget or other matters beyond delegated thresholds are referred to the Chief Development Officer and the appropriate governance authority. The General Manager is accountable for planning to central design and technical approval SLAs and escalating material delays through the Development PMO.</p><p><strong>Desired Candidate Profile</strong></p><p>Education &amp; Experience Bachelor's degree in Engineering, Construction Management, Architecture, Quantity Surveying, Real Estate or a related discipline; PMP, chartered status or equivalent professional qualification is an advantage. A minimum of 15 years of relevant real-estate, destination or development-delivery experience, including at least 5 years leading multi-project portfolios at Project Director, Development Director or General Manager level. Proven track record of delivering a master-planned community, resort or mixed-use destination through multiple phases, preferably including residential build-to-sell components. Strong experience in residential development, including off-plan sales, escrow requirements, phased construction and customer handover. Extensive experience managing consultants and contractors, with strong commercial knowledge of cost management, contracts, claims and variation control. Experience operating in stage-gated, PMO-driven and matrix delivery environments with central design and technical authorities. Proven government and community stakeholder-management experience; familiarity with Dhofar or southern Oman is a distinct advantage. Strong HSE leadership and demonstrated sensitivity to environmental, coastal, archaeological and heritage constraints. Arabic is strongly preferred given the local stakeholder environment. Key Skills &amp; Competencies Functional Portfolio and multi-project development leadership across the full development life cycle. Strong commercial, financial and cost-management capability, including budget control, contracts, claims and variations. Ability to interpret and challenge business cases, project financials, cash flows and key development indicators. Strong project controls, programming, risk, issue and change-management capability. Sound understanding of master planning, design management, infrastructure, utilities, construction, commissioning and handover. Strong understanding of stage-gate governance, delegated authority and matrix delivery structures. Ability to lead multidisciplinary teams and manage complex stakeholder interfaces across multiple concurrent projects. Behavioral Visible and decisive leadership with strong accountability for delivery outcomes. Excellent communication, stakeholder-management, influencing and negotiation skills. Commercially sharp, calm under multi-site pressure and able to make balanced decisions with incomplete information. High standards of integrity, transparency and accuracy in reporting. Key Relationships Internal Chief Development Officer. South Cluster project managers, PMO/project controls, commercial, handover and other cluster resources. Design &amp; Master Planning and Technical Services. Capital Procurement &amp; Contracts, Finance, Legal/GRC and HSE. Sales &amp; Leasing, Asset Management, Destinations Management and other relevant OMRAN functions. External Dhofar Municipality, relevant ministries, utility providers and other government authorities. Project management consultants, designers, engineers, cost consultants, contractors and specialist advisers. Customers, investors, community representatives and other project stakeholders, as applicable.</p>

<p>Supervise and coordinate all steel structure and sandwich panel erection activities on site. Plan daily work assignments and allocate manpower, tools, and equipment effectively. Ensure erection work is carried out in accordance with approved drawings, specifications, and project schedules. Monitor work quality and ensure compliance with project quality standards. Coordinate with the Site Engineer, Project Manager, client representatives, and subcontractors.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 3 years experience in sandwich panel manufacturing company.</p>

<p>Position Information Summary The After Sales Manager is responsible for leading and managing all after-sales operations for trucks and buses, ensuring high levels of customer satisfaction, service quality, and profitability. The role oversees workshop operations, spare parts availability, warranty administration, service contracts, and customer support while ensuring compliance with manufacturer standards and company policies.</p><p>Reporting To: Chief Executive Officer</p><p>Key Responsibilities</p><ul><li>Manage the overall after-sales business, including workshop, spare parts, warranty, and field service operations.</li><li>Develop and implement strategies to improve customer satisfaction, retention, and service revenue.</li><li>Ensure efficient workshop operations, including job planning, productivity, quality control, and timely vehicle delivery.</li><li>Monitor and improve key performance indicators (KPIs) such as workshop efficiency, technician productivity, first-time fix rate, and customer satisfaction.</li><li>Oversee spare parts inventory management to ensure optimum stock levels and parts availability.</li><li>Manage warranty claims, ensuring accurate documentation and timely submission in line with manufacturer requirements.</li><li>Build and maintain strong relationships with fleet customers and key accounts through regular visits and proactive support.</li><li>Lead, coach, and develop service advisors, workshop supervisors, technicians, and parts personnel.</li><li>Ensure compliance with health, safety, environmental, and quality standards.</li><li>Prepare annual budgets, monitor expenses, and achieve departmental profitability targets.</li><li>Analyze service performance reports and implement continuous improvement initiatives.</li><li>Coordinate with sales, technical support, and manufacturers on product issues, recalls, and service campaigns.</li><li>Ensure all service processes comply with manufacturer guidelines and company policies.</li><li>Handle customer complaints professionally and ensure timely resolution.</li><li>Identify opportunities to increase after-sales revenue through maintenance contracts, value-added services, and customer loyalty programs.</li></ul><p>Qualifications</p><ul><li>Bachelor s degree in mechanical engineering, Automotive Engineering with Business Administration, or a related field.</li><li>Professional certifications in automotive or commercial vehicle service management are an advantage.</li></ul><p>Experience</p><ul><li>Minimum 10 years of experience in commercial vehicle after-sales operations, including preparing budgets and P&amp;L management</li><li>Minimum 5 years in a managerial role within a truck and bus dealership or commercial vehicle manufacturer.</li><li>Experience in establishing and managing workshop operations, spare parts, warranty, and customer service.</li><li>Experience in Dealer and Service Partner Management</li></ul><p>Required Skills</p><ul><li>Strong leadership and team management skills.</li><li>Excellent knowledge of truck and bus maintenance, diagnostics, and repair processes.</li><li>Understanding of dealer management systems (DMS), ERP systems, and workshop management software.</li><li>Strong financial and budget management skills.</li><li>Excellent customer relationship and conflict resolution abilities.</li><li>Analytical and problem-solving skills.</li><li>Effective communication and negotiation skills.</li><li>Ability to work under pressure and achieve performance targets.</li><li>Proficiency in Microsoft Office applications.</li></ul><p>Key Performance Indicators (KPIs)</p><ul><li>Customer Satisfaction Index (CSI)</li><li>Workshop productivity and efficiency</li><li>Technician utilization rate</li><li>First-time fix rate</li><li>Service revenue growth</li><li>Spare parts sales growth</li><li>Warranty claim accuracy and recovery</li><li>Vehicle turnaround time</li><li>Customer retention rate</li><li>Department profitability</li><li>Health and safety compliance</li></ul><p>Technical Competencies</p><ul><li>Commercial Vehicle Diagnostics</li><li>Workshop Operations</li><li>Fleet Maintenance</li><li>Warehouse &amp; Inventory Management</li><li>ERP Systems (SAP/Odoo)</li><li>Warranty Systems</li><li>Technical Reporting</li><li>Root Cause Analysis</li><li>Preventive Maintenance Planning</li><li>KPI Dashboard Development</li><li>Budgeting &amp; Financial Analysis</li><li>Contract &amp; SLA Management</li><li>Government Tender Support</li></ul><p>Language Requirements</p><ul><li>Fluent English (Mandatory) verbal and written.</li><li>Arabic (Mandatory) conversational and business communication with customers, government entities, and service partners.</li></ul><p>Other Requirements</p><ul><li>Middle East /Oman Driving License.</li><li>Willingness to travel extensively across the Sultanate of Oman and Middle east.</li><li>Ability to support customers personally during emergency breakdowns and critical fleet operations.</li><li>Strong understanding of Government procurement processes and public-sector customer expectations.</li></ul><p>Reporting Line</p><ul><li>Reports to: CEO / Dealer Principal / Aftersales Director</li><li>Direct Reports: Workshop Manager/Supervisor Service Advisors Parts Manager Warranty Administrator Field Service Team Technicians (directly or through supervisors)</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in mechanical engineering, Automotive Engineering with Business Administration, or a related field. Professional certifications in automotive or commercial vehicle service management are an advantage. Minimum 10 years of experience in commercial vehicle after-sales operations, including preparing budgets and P&amp;L management. Minimum 5 years in a managerial role within a truck and bus dealership or commercial vehicle manufacturer. Experience in establishing and managing workshop operations, spare parts, warranty, and customer service. Experience in Dealer and Service Partner Management. Strong leadership and team management skills. Excellent knowledge of truck and bus maintenance, diagnostics, and repair processes. Understanding of dealer management systems (DMS), ERP systems, and workshop management software. Strong financial and budget management skills. Excellent customer relationship and conflict resolution abilities. Analytical and problem-solving skills. Effective communication and negotiation skills. Ability to work under pressure and achieve performance targets. Proficiency in Microsoft Office applications. Middle East /Oman Driving License. Willingness to travel extensively across the Sultanate of Oman and Middle east. Ability to support customers personally during emergency breakdowns and critical fleet operations. Strong understanding of Government procurement processes and public-sector customer expectations.</p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Pre-commissioning & commissioning electrical superintendent</h4> <h4>Job summary</h4> <p>We are seeking an experienced pre-commissioning and commissioning electrical superintendent to lead and coordinate electrical pre-commissioning and commissioning activities on a major onshore energy development project. The role is responsible for ensuring the safe, timely, and compliant execution of all electrical systems through completion, energization, testing, and handover to operations.<br> The successful candidate will act as a key site-based technical authority, coordinating closely with construction, commissioning, operations, contractors, and engineering teams to deliver systems in accordance with project specifications, safety standards, and quality requirements.</p> <h4>Key responsibilities</h4> <strong>Pre-commissioning & commissioning execution</strong> <ul> <li>Lead and supervise all electrical pre-commissioning and commissioning activities, including inspections, testing, energization, and system handover.</li> <li>Ensure readiness of electrical systems for commissioning by validating construction completion, punch list clearance, and mechanical completion dossiers.</li> <li>Oversee execution of insulation resistance tests, continuity checks, functional testing, loop checks, cable meggering, and high-voltage testing.</li> <li>Manage and authorize electrical system energization activities, ensuring compliance with approved procedures and permits.</li> <li>Coordinate commissioning sequences aligned with system priorities and overall project schedules.</li> </ul> <strong>Safety & compliance</strong> <ul> <li>Ensure full compliance with HSE policies, electrical safety regulations, and project commissioning procedures.</li> <li>Lead risk assessments, job hazard analyses (JHA), and method statement reviews related to electrical works.</li> <li>Enforce lockout-tagout (LOTO) and safe isolation procedures during testing and energization.</li> <li>Promote a strong safety culture within commissioning teams and contractor workforce.</li> </ul> <strong>Team leadership & coordination</strong> <ul> <li>Supervise electrical commissioning supervisors, technicians, and contractors on site.</li> <li>Allocate manpower, tools, and resources effectively to meet commissioning milestones.</li> <li>Interface closely with construction, instrumentation, mechanical, and operations teams to resolve inter-disciplinary issues.</li> <li>Coordinate with vendors and OEMs during factory acceptance tests (FAT), site acceptance tests (SAT), and specialized commissioning activities.</li> </ul> <strong>Documentation & reporting</strong> <ul> <li>Review and approve electrical commissioning procedures, test packs, and completion dossiers.</li> <li>Ensure accurate recording of test results and verification data in commissioning databases.</li> <li>Track and manage punch lists, anomalies, and non-conformances to closure.</li> <li>Provide regular progress reports, highlighting risks, delays, and mitigation actions to commissioning management.</li> </ul> <strong>Technical oversight</strong> <p>Provide technical leadership for HV and LV systems including:</p> <ul> <li>HV/LV switchgear</li> <li>Transformers</li> <li>Motors and drives (VFDs)</li> <li>UPS systems</li> <li>Emergency power and generators</li> <li>Lighting, earthing, and lightning protection systems</li> </ul> <p>Support troubleshooting and resolution of electrical issues encountered during commissioning and early operation.</p> <strong>Handover & start-up support</strong> <ul> <li>Support structured handover of commissioned systems to operations and maintenance teams.</li> <li>Participate in start-up, performance testing, and early operational support as required.</li> <li>Ensure commissioning documentation is complete, approved, and archived per project requirements.</li> </ul> <h4>Qualifications & experience</h4> <strong>Education</strong> <p>Bachelor’s degree in electrical engineering or equivalent technical qualification.</p> <strong>Experience</strong> <ul> <li>Minimum 12–15 years of experience in electrical engineering within large EPC or energy infrastructure projects.</li> <li>Proven experience in pre-commissioning and commissioning of complex industrial facilities (LNG, oil & gas, petrochemical, or power projects preferred).</li> <li>Hands-on experience with high-voltage electrical systems and critical power infrastructure.</li> <li>Strong understanding of international electrical codes and standards (IEC, IEEE, NFPA, etc.).</li> </ul> <strong>Skills & competencies</strong> <ul> <li>Strong leadership and team coordination skills in a multicultural site environment.</li> <li>High level of competence in electrical safety management and energization planning.</li> <li>Excellent problem-solving and decision-making abilities under schedule pressure.</li> <li>Strong communication and reporting skills.</li> <li>Ability to interpret engineering drawings, single line diagrams, and commissioning procedures.</li> <li>Proficient in MS Office and electronic commissioning documentation systems.</li> </ul> <h4>Work conditions</h4> <ul> <li>Site-based role within a large industrial construction environment.</li> <li>May require shift work, extended hours, and weekend coverage during critical commissioning phases.</li> <li>Ability to work in challenging climatic conditions as per project location.</li> </ul></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Pre-commissioning & commissioning electrical superintendent</h4> <h4>Job summary</h4> <p>We are seeking an experienced pre-commissioning and commissioning electrical superintendent to lead and coordinate electrical pre-commissioning and commissioning activities on a major onshore energy development project. The role is responsible for ensuring the safe, timely, and compliant execution of all electrical systems through completion, energization, testing, and handover to operations.<br> The successful candidate will act as a key site-based technical authority, coordinating closely with construction, commissioning, operations, contractors, and engineering teams to deliver systems in accordance with project specifications, safety standards, and quality requirements.</p> <h4>Key responsibilities</h4> <strong>Pre-commissioning & commissioning execution</strong> <ul> <li>Lead and supervise all electrical pre-commissioning and commissioning activities, including inspections, testing, energization, and system handover.</li> <li>Ensure readiness of electrical systems for commissioning by validating construction completion, punch list clearance, and mechanical completion dossiers.</li> <li>Oversee execution of insulation resistance tests, continuity checks, functional testing, loop checks, cable meggering, and high-voltage testing.</li> <li>Manage and authorize electrical system energization activities, ensuring compliance with approved procedures and permits.</li> <li>Coordinate commissioning sequences aligned with system priorities and overall project schedules.</li> </ul> <strong>Safety & compliance</strong> <ul> <li>Ensure full compliance with HSE policies, electrical safety regulations, and project commissioning procedures.</li> <li>Lead risk assessments, job hazard analyses (JHA), and method statement reviews related to electrical works.</li> <li>Enforce lockout-tagout (LOTO) and safe isolation procedures during testing and energization.</li> <li>Promote a strong safety culture within commissioning teams and contractor workforce.</li> </ul> <strong>Team leadership & coordination</strong> <ul> <li>Supervise electrical commissioning supervisors, technicians, and contractors on site.</li> <li>Allocate manpower, tools, and resources effectively to meet commissioning milestones.</li> <li>Interface closely with construction, instrumentation, mechanical, and operations teams to resolve inter-disciplinary issues.</li> <li>Coordinate with vendors and OEMs during factory acceptance tests (FAT), site acceptance tests (SAT), and specialized commissioning activities.</li> </ul> <strong>Documentation & reporting</strong> <ul> <li>Review and approve electrical commissioning procedures, test packs, and completion dossiers.</li> <li>Ensure accurate recording of test results and verification data in commissioning databases.</li> <li>Track and manage punch lists, anomalies, and non-conformances to closure.</li> <li>Provide regular progress reports, highlighting risks, delays, and mitigation actions to commissioning management.</li> </ul> <strong>Technical oversight</strong> <p>Provide technical leadership for HV and LV systems including:</p> <ul> <li>HV/LV switchgear</li> <li>Transformers</li> <li>Motors and drives (VFDs)</li> <li>UPS systems</li> <li>Emergency power and generators</li> <li>Lighting, earthing, and lightning protection systems</li> </ul> <p>Support troubleshooting and resolution of electrical issues encountered during commissioning and early operation.</p> <strong>Handover & start-up support</strong> <ul> <li>Support structured handover of commissioned systems to operations and maintenance teams.</li> <li>Participate in start-up, performance testing, and early operational support as required.</li> <li>Ensure commissioning documentation is complete, approved, and archived per project requirements.</li> </ul> <h4>Qualifications & experience</h4> <strong>Education</strong> <p>Bachelor’s degree in electrical engineering or equivalent technical qualification.</p> <strong>Experience</strong> <ul> <li>Minimum 12–15 years of experience in electrical engineering within large EPC or energy infrastructure projects.</li> <li>Proven experience in pre-commissioning and commissioning of complex industrial facilities (LNG, oil & gas, petrochemical, or power projects preferred).</li> <li>Hands-on experience with high-voltage electrical systems and critical power infrastructure.</li> <li>Strong understanding of international electrical codes and standards (IEC, IEEE, NFPA, etc.).</li> </ul> <strong>Skills & competencies</strong> <ul> <li>Strong leadership and team coordination skills in a multicultural site environment.</li> <li>High level of competence in electrical safety management and energization planning.</li> <li>Excellent problem-solving and decision-making abilities under schedule pressure.</li> <li>Strong communication and reporting skills.</li> <li>Ability to interpret engineering drawings, single line diagrams, and commissioning procedures.</li> <li>Proficient in MS Office and electronic commissioning documentation systems.</li> </ul> <h4>Work conditions</h4> <ul> <li>Site-based role within a large industrial construction environment.</li> <li>May require shift work, extended hours, and weekend coverage during critical commissioning phases.</li> <li>Ability to work in challenging climatic conditions as per project location.</li> </ul></p><p></p>

<p>Greetings Form TQcert (Tata Projects) ! We Have Requirement With Our Reputed Client. Job Position: Welding Inspectors - CBT Job Location: Oman (Onshore Fabrication Yard) Benefits: Salary + F.A.T Duty Hours: 10 Hrs - 6 Days.</p> <h3>Key Responsibilities:</h3> <ul> <li><strong>NDT Coordination</strong> Witness and validate NDT activities such as RT, UT, MT, and PT. Review NDT reports and ensure acceptance criteria compliance.</li> <li><strong>Documentation &amp; Reporting</strong> Review and endorse QA/QC documentation including: Welding procedures (WPS/PQR) Inspection reports Material traceability records Prepare daily/weekly inspection reports and submit to client/TPI agency. Identify and report non-conformances (NCRs) and follow up on corrective actions.</li> <li><strong>Compliance &amp; Standards</strong> Ensure adherence to: AWS D1.1, ASME Section IX, ISO standards, Client specifications and project requirements Verify material identification and traceability.</li> <li><strong>Stakeholder Coordination</strong> Interface with contractor QA/QC, client representatives, and project team. Provide technical clarification and inspection feedback.</li> </ul><p><strong>Desired Candidate Profile</strong></p><h3>Required Qualifications &amp; Certifications:</h3> <ul> <li>Diploma / Degree in Mechanical Engineering or related discipline.</li> <li>CSWIP 3.1 / AWS-CWI or equivalent (Mandatory).</li> <li>CBT Certification (as per client/project requirements).</li> <li>Knowledge of international codes and offshore fabrication standards.</li> </ul> <h3>Experience Requirements:</h3> <ul> <li>5-10 years in welding inspection.</li> <li>Mandatory experience in Third Party Inspection (TPI) assignments.</li> <li>Having Experience in offshore structures (jackets, topsides, modules) fabricated in onshore yards is added advantage.</li> </ul> <h3>Additional Requirements:</h3> <ul> <li>Willing to work in onshore yard environments.</li> <li>Ability to work under strict timelines and quality requirements.</li> <li>Immediate availability preferred.</li> </ul>

<p>Role &amp; responsibilities Prepare project schedules, manpower planning, and work execution plans as per project requirements. Monitor daily, weekly, and monthly project progress and prepare progress reports. Coordinate with site execution team for work status, measurements, and quantity tracking. Prepare RA Bills, client billing, subcontractor billing, and invoice supporting documents. Verify work quantities as per drawings, site execution, and BOQ. Maintain billing records, work completion reports, and project documentation. Coordinate with client and consultant for bill certification and approvals. Track project delays, variations, and additional scope of work. Prepare bar charts, progress trackers, DPR, WPR, and MPR reports. Support project management team in cost control and project monitoring activities. Coordinate with QA/QC and execution departments for measurement and billing clearances. Ensure all billing activities are completed within timeline and as per contract conditions. Attend project review meetings with client and management.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma / B.E. in Mechanical Engineering or relevant discipline. Minimum 512 years of experience in planning and billing activities for industrial projects. Experience in Oil &amp; Gas, Steel Plant, Power Plant, Refinery, or Petrochemical projects preferred. Strong knowledge of billing procedures, BOQ, quantity estimation, and project planning. Good knowledge of MS Excel, MS Project, Primavera (preferred), and reporting formats. Ability to coordinate with client, execution, and commercial teams effectively. Gulf experience will be an added advantage. Good communication and documentation skills.</p>

<ul><li><p>Review tender documents, drawings, specifications, and BOQs.</p></li><li><p>Prepare detailed quantity take-offs for Plumbing and Firefighting systems.</p></li><li><p>Prepare accurate cost estimates, pricing, and tender submissions.</p></li><li><p>Obtain and evaluate quotations from suppliers and subcontractors.</p></li><li><p>Analyze project scope, identify risks, and recommend cost-effective solutions.</p></li><li><p>Coordinate with engineering, procurement, and project teams during the tender stage.</p></li><li><p>Prepare technical and commercial bid documentation.</p></li><li><p>Attend pre-bid meetings and respond to tender clarifications.</p></li><li><p>Maintain an updated database of material, labor, and subcontractor rates.</p></li><li><p>Support project handover by preparing budget and cost information after successful tender awards.</p></li><li><p>Ensure compliance with client specifications, local regulations, and company standards.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Qualifications</p><ul><li><p>Diploma or BTech in Mechanical Engineering.</p></li><li><p>5–10 years of relevant experience as an MEP Quantity Surveyor in Plumbing and Firefighting works.</p></li><li><p>Preference will be given to candidates with experience in Oman construction companies.</p></li><li><p>Proven track record of preparing successful and winning tenders.</p></li></ul><p>Required Skills</p><ul><li><p>Strong knowledge of Plumbing and Firefighting systems.</p></li><li><p>Expertise in quantity take-offs, estimation, BOQ preparation, and cost analysis.</p></li><li><p>Knowledge of Oman construction practices, local authority requirements, and market rates.</p></li><li><p>Proficiency in AutoCAD, Microsoft Excel, and estimation/QS software.</p></li><li><p>Ability to interpret engineering drawings and technical specifications.</p></li><li><p>Strong analytical, negotiation, and communication skills.</p></li><li><p>Ability to work independently and manage multiple tender submissions within deadlines.</p></li></ul><p>Preferred Experience</p><ul><li><p>Experience with commercial, residential, industrial, and infrastructure projects.</p></li><li><p>Familiarity with FIDIC contracts and tendering procedures.</p></li></ul>

<p>Lead and coordinate all DRI plant activities during the assigned shift. Participate in project execution, equipment installation verification, system walk-downs, punch-list clearance and mechanical completion. Review P&amp;IDs, process flow diagrams, operating philosophies, equipment specifications and control narratives. Support pre-commissioning and commissioning activities including flushing, blowing, hydrotesting, leak testing, loop checking and equipment trials. Lead plant start-up, stabilization, normal operation and planned/emergency shutdown activities. Monitor and optimize major process areas including the reduction reactor/shaft furnace, Process Gas Heater (PGH), process gas circuit, CO removal system, natural-gas system, water-treatment facilities and associated utilities. Ensure process parameters remain within operating limits to achieve required DRI/HBI quality and production targets. Coordinate closely with panel operators, field operators, maintenance, electrical, instrumentation, laboratory and other supporting functions. Identify process deviations and equipment abnormalities and lead first-line troubleshooting. Ensure strict compliance with Permit to Work, LOTO, confined-space, gas-safety and other HSE procedures. Maintain accurate shift logs, production reports, abnormality reports and shift handover documentation. Develop and review SOPs, operating checklists and emergency operating procedures. Coach and supervise operators and ensure effective allocation of manpower during shifts. Support continuous improvement initiatives related to plant availability, productivity, energy efficiency and operational reliability.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Chemical Engineering/Science or Diploma in Chemical Engineering or equivalent. Minimum 8 years' relevant experience for degree holders or 12 years for diploma holders. At least 3 years' experience as a Shift Production Supervisor/Shift In-Charge in a DRI or comparable continuous-process facility. Strong preference for experience in Tenova HYL/Energiron and/or Midrex DRI plants. Previous greenfield, brownfield expansion, revamp or commissioning experience is highly desirable. Strong understanding of DRI process chemistry, reducing-gas systems, natural-gas handling, CO removal, water treatment and process utilities. Demonstrated leadership, troubleshooting and shift-management capabilities. Strong commitment to process safety and safe plant operation.</p>

<p>Hiring for a leading company in Oman for solar project. Required Project Engineer (Civil) with experience in solar piling and alignment activity preferred.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Project Engineer (Civil) with experience in solar piling and alignment activity preferred.</p>

<p>ENINE is seeking a Junior / Electrical Site Engineer / Civil Site Engineer.</p><p><br></p><p><span style="font-size: 11px;">Bachelor s degree in Civil Engineering.</span><br><span style="font-size: 11px;">Fresh graduates and experienced candidates are welcome to apply.</span><br><span style="font-size: 11px;">Good command of AutoCAD and Microsoft Office.</span><br><span style="font-size: 11px;">Strong communication, organization, and teamwork skills.</span></p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>URGENT OVERSEAS RECRUITMENT OMAN We are hiring experienced professionals and skilled electrical workers for Oman-based projects . 1. QA/QC Coating &amp; Painting Engineer Seawater Projects Experience: 10+ years Preferred: Civil Engineering background Salary: Up to OMR 800 2. Civil Engineer Experience: 5 years, including 2 3 years GCC experience Qualification: BE/B.Tech in Civil Engineering Preferred: Experience in STP/WWTP construction Salary: Up to OMR 450 3. QA/QC Engineer Electrical Qualification: BE/B.Tech in Electrical &amp; Electronics Engineering (EEE) Certification: ISO 9001:2015 Internal Auditor Experience: 5+ years Preferred: Substation project experience Salary: OMR PHONE_NUMBER 4. Lineman 15 Vacancies Experience: 4+ years Education: Minimum 10th Pass Salary: OMR PHONE_NUMBER Employment: Project-based Required Experience: Substation, overhead line and underground cable works up to 33kV Climbing wooden poles Stringing of conductors 5. Chargehand 5 Vacancies Experience: 8+ years Education: Minimum 10th Pass Salary: OMR 150 Employment: Project-based Required Experience: Substation, overhead line and underground cable works up to 33kV Climbing wooden poles Stringing of conductors FREE BENEFITS Free Food Free Accommodation Free Transportation Free Joining Air Ticket Free Vacation/Return Air Ticket Free Medical Interested candidates can share their updated CV: Contact: PHONE_NUMBER Email: EMAIL_ADDRESS Location: Oman | Immediate Hiring</p><p><strong>Desired Candidate Profile</strong></p><p>Experience: 10+ years Preferred: Civil Engineering background</p>

<p>Hiring Now - Electrical Site Engineer | Civil Site Engineer</p><p><br></p><p><span style="font-size: 11px;">Bachelor s degree in Civil Engineering</span><br><span style="font-size: 11px;">1 to 6 years of experience in residential execution works</span><br><span style="font-size: 11px;">Strong knowledge of construction methods and site management</span><br><span style="font-size: 11px;">Ability to work under pressure and meet deadlines</span><br><span style="font-size: 11px;">Good communication and coordination skills</span></p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> The avionics technician (F-16 Block 50+) fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of instrumentation including: area surveillance, telemetry, radar, or global positioning system (GPS) metric track (MT). Conducts special technical studies and reports regarding instrumentation configuration, acceptance, and/or performance.</p> <p><strong>Job description:</strong></p> <ul> <li>Perform or supervise functions involving installation, repair, testing, and modification on NAV attack, flight controls radar, SMS, Comm/Nav and ECM systems.</li> <li>Operate avionics systems by using aircraft controls to determine operational condition.</li> <li>Interpret equipment operating characteristics to isolate malfunctions in systems such as attack control, radar infrared, laser, instruments, displays, flight control, communication, navigation, satellite communications, identification, defensive and offensive ECM systems.</li> <li>Use technical data wiring diagrams, electronic measurement equipment, AGE/GSE, and special tools.</li> <li>Remove and install components.</li> <li>Perform and supervise alignment calibration and bore sight of avionics systems.</li> <li>Upload operational software into system components.</li> <li>Inspect, analyze, and evaluate avionics systems.</li> <li>Interpret inspection findings and determine adequacy of corrective actions.</li> <li>Review maintenance management publications and procedures.</li> <li>Recommend methods to improve equipment performance and maintenance procedures.</li> <li>Perform on-the-job training and instruction; supervise and accept work performed by RAFO technicians.</li> </ul> <p><strong>Minimum requirements:</strong></p> <ul> <li>5 years F-16 Block 50+ or 8 years supporting F-16 aircraft.</li> <li>AFSC 2A3X4, 2A354, or 2A374 F-16 Block 50 integrated avionics or equivalent.</li> <li>Performed and/or supervised functions involving installation, repair, testing, and modification on F-16 Block 50 and up avionics systems.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma.</li> </ul> <p><strong>Clearance requirements:</strong><br> Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <p><strong>Physical/preferred qualifications:</strong></p> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Exposure to disagreeable fumes and to cuts and bruises from using tools in close places and hazards of moving vehicles such as forklifts in the shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul></p><p></p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> The avionics technician (F-16 Block 50+) fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of instrumentation including: area surveillance, telemetry, radar, or global positioning system (GPS) metric track (MT). Conducts special technical studies and reports regarding instrumentation configuration, acceptance, and/or performance.</p> <p><strong>Job description:</strong></p> <ul> <li>Perform or supervise functions involving installation, repair, testing, and modification on NAV attack, flight controls radar, SMS, Comm/Nav and ECM systems.</li> <li>Operate avionics systems by using aircraft controls to determine operational condition.</li> <li>Interpret equipment operating characteristics to isolate malfunctions in systems such as attack control, radar infrared, laser, instruments, displays, flight control, communication, navigation, satellite communications, identification, defensive and offensive ECM systems.</li> <li>Use technical data wiring diagrams, electronic measurement equipment, AGE/GSE, and special tools.</li> <li>Remove and install components.</li> <li>Perform and supervise alignment calibration and bore sight of avionics systems.</li> <li>Upload operational software into system components.</li> <li>Inspect, analyze, and evaluate avionics systems.</li> <li>Interpret inspection findings and determine adequacy of corrective actions.</li> <li>Review maintenance management publications and procedures.</li> <li>Recommend methods to improve equipment performance and maintenance procedures.</li> <li>Perform on-the-job training and instruction; supervise and accept work performed by RAFO technicians.</li> </ul> <p><strong>Minimum requirements:</strong></p> <ul> <li>5 years F-16 Block 50+ or 8 years supporting F-16 aircraft.</li> <li>AFSC 2A3X4, 2A354, or 2A374 F-16 Block 50 integrated avionics or equivalent.</li> <li>Performed and/or supervised functions involving installation, repair, testing, and modification on F-16 Block 50 and up avionics systems.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma.</li> </ul> <p><strong>Clearance requirements:</strong><br> Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <p><strong>Physical/preferred qualifications:</strong></p> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Exposure to disagreeable fumes and to cuts and bruises from using tools in close places and hazards of moving vehicles such as forklifts in the shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Execute Electrical Maintenance Works B-60, under delegated authority and direction from TL Maintenance B60 as Technical Service provider of maintenance and execution of minor projects, modifications in accordance with the technical standards to maintain the assets through: (1) Leading the design Maintenance Electrical services on planned / un-planned maintenance works utilizing best practice. (2) Coordination and supervision of assets, products and maintenance work in the designated area, (3) Implement plans and coordinate Electrical maintenance works; in order to ensure plant equipment availability, reliability &amp; optimization of cost / resources while facilitating smooth operations of the plant to meet operational targets.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><p>Accountable for continuous flow of electrical power to plant / Substations / buildings.</p><p>Ensure application of best work practices in execution of electrical maintenance jobs.</p><p>Responsible for electrical side of project implementation in Gas Network facilities.</p><p>Implements the Preventive Maintenance (PM) plan within his section and execution along with work backlogs</p><p>Prepares procurement plan for his section.</p><p>Responsible for issuing Work Permits on electrical side and implementing Lock Out Tag Out (LOTO) procedure.</p><p>In emergency drills or emergency situations maintains close liaison with On-Scene Commander and Operation Coordinator, for ensuring quick restoration of power.</p><p>Participate in Management of Change (MOC) committee review meetings.</p><p>Ensure electrical equipment maintenance history &amp; reports are updated in SAP (CMMS)</p><p>Implements the Corrective Maintenance (CM) plan within his section and execution along with work backlogs</p><p>Ensure to raise Z1 notification for CM activity in SAP</p><p>Identify the critical issues, repetitive failure of Electrical equipment, done and the RCA Recommendations implemented for the area</p><p>Monitors staff attendance, attitude and implements discipline within the section.</p><p>Prepare annual leave plans</p><p>Full technical &amp; manpower support during plants shutdown.</p><p>Determines long term Electrical maintenance policy and oversees detailed planning of maintenance activities and programs.</p><p>Reviews policies of warehouse materials/spare parts and determines strategy of their handling and procurement and ensures availability.</p><p>Coordinates efforts within the Section to develop guidelines, specifications, best practices and procedures for maintenance</p><p>Maintains technical expertise in functional areas.</p><p>Carries out the technical evaluation of bids and generates the evaluation report.</p><p>Develops IDP of Omanis within the section, prepares training programs and monitors their implementation</p><p><strong>Key Interactions</strong></p><p>Internal: Field Operators, Shift Team Leader, Panel Operators, Maintenance Coordinator, Process Trainer, Technical Services Department, Sr. / Engineer Operations.</p><p>External: Ministries, Civil Defense, ROP and Neighboring Companies</p><p><strong>Notable Working Conditions.</strong> Field Operations and office environment, Moderate to intensive computer screen use.</p><p>2+ years of relevant experience</p><p>Knowledge of maintenance processes for Gas Network operations</p><p>Knowledge of Electrical control loops.</p><p>Familiar with Systems, Applications and Products in data processing (SAP).</p><p>Expertise in High Tension voltage, Substation, Switch gear, MCC and Power network</p><p>Experience on pre-commissioning and commissioning of Power Sub Station</p><p>Good knowledge of modern maintenance technologies &amp; maintenance Planning and execution of Electrical Equipment s, Substation, EDGs, VFD Drives, Power electronics, 33KV OHL, UPS,</p><p>Sound judgment in technical matters with good skills in engineering field materials specifications and international standards.</p><p>Good experience in handling Maintenance Contracts and shutdown related jobs.</p><p>Knowledge of:</p><p>Computerized Maintenance Management Systems (CMMS)</p><p>Expertise in SAP- PM, CM&amp;Z1</p><p>Process Equipment Life-Cycle Management</p><p>Good knowledge in Quality Assurance, Quality Control and HSE plans.</p><p>Familiar with techniques for ensuring data integrity with various integration of information/ reports</p><p>Knowledgeable in HSE plans related to maintenance activities.</p><p>Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals</p><p><strong>Soft:</strong></p><p>Through use of facts</p><p>Troubleshooting and result oriented</p><p>Verbal and writing reporting skills-effective Communication</p><p>Demonstrated leadership impact to deliver improved and sustained performance</p><p>Able to build relationships within department staff and contractors with a focus on collaboration.</p><p>Ability to manage multiple priorities in a diversified and critical environment.</p><p><strong>Technical:</strong></p><p>Root Cause Analysis (RCA)</p><p>Reading and interpreting engineering drawings</p><p>Project Management</p><p>Developing and Modifying Technical Procedures</p><p>Ability to align the requirements of operations and maintenance</p><p>Familiar with techniques for ensuring data integrity with various integration of information/ reports</p><p>Knowledge in estimating, budgeting and cost control.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Minimum Qualifications Diploma in Electrical Engineering or similar<br>Language requirements Excellent knowledge of written, read, and spoken English (required), Arabic - Native (desirable)<br>Competencies and skills<br>2+ years of relevant experience<br>Knowledge of maintenance processes for Gas Network operations<br>Knowledge of Electrical control loops.<br>Familiar with Systems, Applications and Products in data processing (SAP).<br>Expertise in High Tension voltage, Substation, Switch gear, MCC and Power network<br>Experience on pre-commissioning and commissioning of Power Sub Station<br>Good knowledge of modern maintenance technologies &amp; maintenance Planning and execution of Electrical Equipment s, Substation, EDGs, VFD Drives, Power electronics, 33KV OHL, UPS,<br>Sound judgment in technical matters with good skills in engineering field materials specifications and international standards.<br>Good experience in handling Maintenance Contracts and shutdown related jobs.<br>Knowledge of:<br>Computerized Maintenance Management Systems (CMMS)<br>Expertise in SAP- PM, CM&amp;Z1<br>Process Equipment Life-Cycle Management<br>Good knowledge in Quality Assurance, Quality Control and HSE plans.<br>Familiar with techniques for ensuring data integrity with various integration of information/ reports<br>Knowledgeable in HSE plans related to maintenance activities.<br>Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals<br>Soft:<br>Through use of facts<br>Troubleshooting and result oriented<br>Verbal and writing reporting skills-effective Communication<br>Demonstrated leadership impact to deliver improved and sustained performance<br>Able to build relationships within department staff and contractors with a focus on collaboration.<br>Ability to manage multiple priorities in a diversified and critical environment.<br>Technical:<br>Root Cause Analysis (RCA)<br>Reading and interpreting engineering drawings<br>Project Management<br>Developing and Modifying Technical Procedures<br>Ability to align the requirements of operations and maintenance<br>Familiar with techniques for ensuring data integrity with various integration of information/ reports<br>Knowledge in estimating, budgeting and cost control.</p></section>

<p>Apply the approved standards, procedures and schedules to ensure the reliability and integrity of the plant equipment and systems in the allocated area. Implement the scheduled and unscheduled maintenance on relevant equipment and ensure all work history and data is entered into the CMMS system. Generate all testing protocols, certificates and other documentation in line with established standards and ensure that these are linked to the respective equipment within the CMMS. Ensure the application of approved standards, procedures and schedules for reliability and integrity of the Plant in line with company guidelines Place and remove spades and to open and close pipe flanges, recognize the gasket types, types of bolts and nuts. Carry out Flange tightening by Hydraulic Torquing and tensioning methods. Perform proper slinging and lifting with chain-blocks and small cranes. Remove and re-install rotating equipment like pumps, motors, mixers. Replace Mechanical seals in pumps and compressors. Obtain rotating equipment machine clearances and dimensional data. Acquire PTW certificate and carry out all the responsibilities of PTW holder. Work extended hours and respond to call out duties as and when required.</p><p><strong>Desired Candidate Profile</strong></p><p>Specific Skills: English Language read, write and speaking to IELTS level Able to work with computers, word, excel, and windows and good understanding of Trained and experienced in the alignment of rotating equipment with reverse dial gauge alignment, in addition to using laser alignment equipment. Degree / HND or Diploma in relative discipline or its equivalent.</p>