Software Tester Jobs in Oman

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <h4>Position overview:</h4> <p>The F-16 C/D Electrical and Environmental (E&E) Specialist fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and when necessary, modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of system components.</p> <h4>Duties & responsibilities:</h4> <ul> <li>Performs and supervises aircraft electrical and environmental (E&E) functions and activities performing as an experienced 5 Level Journeyman or 7 Level Craftsman.</li> <li>Troubleshoots, inspects, removes, installs, repairs, modifies, overhauls, and operates aircraft E&E systems, components, and associated support equipment.</li> <li>Uses technical data, wiring diagrams, ohm meters, electronic measuring equipment, GSE and special tools. Expert level in accomplishing and training of wire repair procedures.</li> <li>Uploads operational software, flight programs (OFP) into system components and maintains currency and software upgrade efficiency.</li> <li>Expert level to inspect, analyze and evaluate electrical and environmental systems malfunctions, aircraft heating/air conditioning, avionics cooling, cabin pressure, OBOGS, fire and overheat detection systems, AC power system, DC power system, external power system, lighting system to include exterior, interior, emergency, position lights, anti-collision, formation, slipway lights, taxi light.</li> <li>Remove, install, adjust, operational check, bench-check, service the following: landing gear system, handle, control switches, arresting hook indication/canopy indication/overheat fire/master caution/fuel warning and control systems, anti-skid, brake holding, nose gear steering, secondary flight control, engine bleed air, fire extinguishing system, squibs, fire bottles, start and ignition/air conditioning/pressurization systems and liquid cooling systems.</li> <li>Interprets inspection findings and determines adequacy of corrective actions.</li> <li>Reviews maintenance management publications, time compliance technical orders and procedures for accuracy and currency, confirms corrective actions and accuracy of aircraft maintenance records.</li> <li>Recommends methods to improve equipment performance and maintenance procedures. Acts as quality assurance for the trade.</li> <li>Performs OJT and instruction, supervises and accepts work performed by RAFO technicians, acts as supervisor and mentor for the shop and directs daily maintenance performed.</li> <li>Required to perform assigned tasks within your work center that directly supports necessary functions of this job classification.</li> </ul> <h4>Requirements:</h4> <ul> <li>Recent, 5 years F-16 electrical and environmental (E&E) Block 40 or above experience.</li> <li>Very experienced 2A6X6 5 level or 7 skill level or equivalent with proven record of F-16 flightline (Organizational) or back shop (Intermediate) maintenance environment.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma or equivalent required.</li> <li>Current passport.</li> <li>Clearance requirements: Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</li> </ul> <h4>Preferences:</h4> <ul> <li>Air Force AFSC 2A656 or 2A676 with F-16 Block 30/50 experience.</li> <li>Block 50 experience.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Senior Solution Architect owns the architecture, design standards, delivery practices, and governance of the company s enterprise business applications. The role sets how solutions are designed, built, deployed, and integrated ensuring they are secure, scalable, well-governed, and reliably delivered into production. The Enterprise Document and Records Management System (EDRMS) is a core platform within the architect s portfolio.</p><p>The role provides technical direction across the application landscape: it defines reference architectures and CI/CD and deployment standards, governs solution designs (internal and vendor), and ensures changes meet security, records, and data-governance requirements.</p><p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><b>Main Tasks and Responsibilities</b><p>Solution Architecture &amp; Design</p><p>Define and maintain reference architectures, solution designs, integration designs, and data-flow diagrams for the enterprise application portfolio, including EDRMS.</p><p>Translate business requirements into secure, scalable, and maintainable technical solutions, selecting appropriate patterns and technologies.</p><p>Provide hands-on design, prototyping, and proof-of-concept work to validate architecture decisions and de-risk delivery.</p><p>Architecture Governance &amp; Standards</p><p>Define, maintain, and enforce solution-design, coding, and integration standards and technical guardrails across applications.</p><p>Operate design-authority / solution-review gates: review and approve internal and vendor technical designs against architecture, security, and data-governance principles.</p><p>Maintain Architecture Decision Records (ADRs) and ensure changes follow change-management, access-control, audit, and IT-governance requirements; provide architecture input to audits and assurance reviews.</p><p>Delivery Standards &amp; CI/CD</p><p>Define the CI/CD strategy and standards (e.g. Azure DevOps, GitLab CI, GitHub Actions) covering source control, branching, automated build/test, code quality, and artifact management.</p><p>Set expectations for automated testing and security scanning (SAST/DAST/dependency) within pipelines, and govern adherence across teams and vendors.</p><p>Guide engineers and vendors in implementing pipelines to the agreed standard, and review delivery practices for quality and consistency.</p><p>Deployment &amp; Release Strategy</p><p>Own deployment architecture and environment strategy (development, test, staging, production), including environment promotion and configuration management.</p><p>Define release governance deployment runbooks, rollback/back-out plans, and post-deployment verification and oversee controlled releases of significant changes.</p><p>Coordinate change windows and cutovers with IT Operations, Infrastructure, Database, Cybersecurity, and vendor teams to protect availability and performance.</p><p>EDRMS / ECM Platform Architecture</p><p>Own the architecture and roadmap of the EDRMS platform (e.g. OpenText Documentum, D2, Content Server, or similar) as a core managed platform.</p><p>Design document-management workflows, metadata models, taxonomy, classification, retention rules, access controls, and integration points, ensuring records compliance and data quality.</p><p>Direct migration, indexing, metadata improvement, OCR, and search-optimisation activities, working with specialist engineers and vendors for deep configuration and build.</p><p>Integration Architecture</p><p>Design secure, resilient integrations between EDRMS / business applications and ERP (e.g. SAP), SharePoint/M365, databases, portals, and identity-management systems using APIs, web services, and connectors.</p><p>Define standards for authentication, error handling, monitoring, and data quality across integrations.</p><p>Technical Leadership, Support Oversight &amp; Vendor Management</p><p>Act as technical authority and escalation point for complex incidents, performance problems, and integration issues, ensuring solutions are supportable and root causes are addressed without owning first-line incident resolution.</p><p>Coordinate with vendors, review technical deliverables for quality and compliance, and follow up on support and enhancement activities.</p><p>Provide technical guidance and knowledge transfer to internal teams and business users, and identify opportunities to automate manual processes and improve usability, efficiency, and reliability.</p><p>Perform other related duties as assigned.</p><b>Key interactions</b><p>Internal: IDS &amp; CI function, IT Operations, Infrastructure, Database, and Cybersecurity functions, business application owners and users across all OQEP functions and streams.</p><p>External: Software and platform vendors (EDRMS/ECM vendors, ERP vendors), system integrators, specialist technical consultants.</p><br><p></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Education Requirements</b><br>Required: Bachelor's degree in Computer Science, Information Technology, Software Engineering, or related field.<br>Preferred: Postgraduate qualification or professional certifications such as TOGAF, Azure Solutions Architect, OpenText/Documentum certification, or equivalent; certifications in DevOps or CI/CD tooling (Azure DevOps, GitLab) are an advantage.<br><b>Language</b><br>Excellent knowledge of written, read, and spoken English (required)<br><b>Background and experience</b><br><b>Competencies and skills</b><br>6+ years of relevant experience in solution architecture, enterprise applications, or software delivery within a medium to large organization.<br>Demonstrated experience designing and governing enterprise application architectures, including integration and deployment architecture.<br>Hands-on experience with EDRMS/ECM platforms (e.g. OpenText Documentum, D2, Content Server, or similar) is strongly preferred.<br>Experience defining and governing CI/CD pipelines and DevOps practices (Azure DevOps, GitLab CI, GitHub Actions, or equivalent).<br>Experience integrating business applications with ERP systems (e.g. SAP), SharePoint/M365, and identity management systems.<br>Familiarity with architecture governance practices including Architecture Decision Records (ADRs) and design-authority processes.<br>Experience working with vendors and managing technical delivery quality and compliance.<br><b>Technical Competencies:</b><br>Strong analytical and problem-solving skills.<br>Excellent communication skills, able to translate technical concepts for business stakeholders.<br>Ability to act as a technical authority and influence design decisions across teams and vendors.<br>Attention to detail and a quality-driven mindset.<br>Self-motivated with the ability to manage multiple initiatives concurrently.<br>Collaborative approach to working with cross-functional and vendor teams.<br>Cultural sensitivity in a multinational environment.<br><b>Technical Competencies:</b><br>Solution and enterprise architecture design (reference architectures, integration design, data-flow diagrams).<br>Architecture governance and Architecture Decision Records (ADRs).<br>CI/CD strategy and tooling (Azure DevOps, GitLab CI, GitHub Actions).<br>Automated testing and security scanning (SAST/DAST/dependency scanning).<br>Deployment architecture, environment strategy, and release governance.<br>EDRMS/ECM platform architecture (OpenText Documentum, D2, Content Server, or similar).<br>Document management workflows, metadata models, taxonomy, and records compliance.<br>Integration architecture (APIs, web services, connectors) with ERP, SharePoint/M365, and identity management systems.<br>IT governance, change management, and access control principles.<br>Vendor management and technical delivery review.IT governance, change management, and access control principles.<br>Vendor management and technical delivery review.</p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Architecte Calculateur F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Intégré-e au sein de la Direction Technique, vous rejoindrez le Centre d'Ingénierie Contrôle Moteur et Puissance spécialisé dans le développement de calculateurs pour l'aéronautique et le spatial.<br>Rattaché-e à l'équipe de développement produit, en tant qu'architecte calculateur, vous travaillerez en équipe intégrée et assurez la passerelle entre les mondes du système du Hardware et du Software.<br>Vous serez garant-e de la performance de la chaine fonctionnelle électrique (moteur/électronique, boucle de régulation / algorithme de contrôle/commande), vous êtes l'interface privilégiée :<br>- Avec l'équipe système en charge de dimensionnement de la chaine cinématique.<br>- De l'ingénierie électrotechnique en charge du développement du moteur électrique.<br>- Et le pilote technique de l'équipe de développement local en charge du développement Hardware et Software formelle.<br>Vos activités seront les suivantes : <br>- Support client interne/externe pour la maturation des spécifications fonctionnelles.<br>- Rédaction de spécifications fonctionnelles<br>- Spécification de scénarios de test <br>- Participation aux phases d'intégration maquette et prototype sur banc de test moteur.<br>- Développement de modèles Matlab/Simulink.</p><br><br><p>Un cadre de travail moderne et agréable<br>Notre site, construit en 2021, offre des locaux neufs, spacieux et confortables, pensés pour favoriser le bien-être et la collaboration au quotidien.</p><br><br><p>De formation supérieur de niveau BAC+5 école d'ingénieur ou équivalent, vous disposez d'au moins 5 ans d'expérience dans le contrôle d'actionnement électrique dans les systèmes embarqués. <br>Une bonne capacité d'analyse et de restitution est requise ainsi qu'une bonne aptitude à vulgariser et parler le langage du software et du hardware. <br>Vous savez vous exprimer en anglais à l'oral comme à l'écrit. Vous êtes le point focal technique pour nos clients et collaborateurs pour des projets à l'international.<br>Rejoignez-nous ! </p><br><br><br> </div>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> The avionics technician (F-16 Block 50+) fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of instrumentation including: area surveillance, telemetry, radar, or global positioning system (GPS) metric track (MT). Conducts special technical studies and reports regarding instrumentation configuration, acceptance, and/or performance.</p> <p><strong>Job description:</strong></p> <ul> <li>Perform or supervise functions involving installation, repair, testing, and modification on NAV attack, flight controls radar, SMS, Comm/Nav and ECM systems.</li> <li>Operate avionics systems by using aircraft controls to determine operational condition.</li> <li>Interpret equipment operating characteristics to isolate malfunctions in systems such as attack control, radar infrared, laser, instruments, displays, flight control, communication, navigation, satellite communications, identification, defensive and offensive ECM systems.</li> <li>Use technical data wiring diagrams, electronic measurement equipment, AGE/GSE, and special tools.</li> <li>Remove and install components.</li> <li>Perform and supervise alignment calibration and bore sight of avionics systems.</li> <li>Upload operational software into system components.</li> <li>Inspect, analyze, and evaluate avionics systems.</li> <li>Interpret inspection findings and determine adequacy of corrective actions.</li> <li>Review maintenance management publications and procedures.</li> <li>Recommend methods to improve equipment performance and maintenance procedures.</li> <li>Perform on-the-job training and instruction; supervise and accept work performed by RAFO technicians.</li> </ul> <p><strong>Minimum requirements:</strong></p> <ul> <li>5 years F-16 Block 50+ or 8 years supporting F-16 aircraft.</li> <li>AFSC 2A3X4, 2A354, or 2A374 F-16 Block 50 integrated avionics or equivalent.</li> <li>Performed and/or supervised functions involving installation, repair, testing, and modification on F-16 Block 50 and up avionics systems.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma.</li> </ul> <p><strong>Clearance requirements:</strong><br> Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <p><strong>Physical/preferred qualifications:</strong></p> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Exposure to disagreeable fumes and to cuts and bruises from using tools in close places and hazards of moving vehicles such as forklifts in the shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Support the delivery of enterprise applications, digital platforms, and integration initiatives. Participate in the full Software Development Life Cycle (SDLC), including analysis, planning, testing, deployment, and post-implementation support. Ensure compliance with organizational policies, regulatory requirements, and IT governance standards. Collaborate with internal stakeholders, vendors, and third-party service providers. Prepare documentation aligned with project and operational standards. Contribute to continuous improvement of delivery processes, quality standards, and operational efficiency. Support knowledge transfer and development of internal capabilities.</p><p>The Senior Business System Analyst shall:</p><ul><li><strong>Business Analysis &amp; Requirements Management</strong><ul><li>Conduct stakeholder analysis and requirements elicitation workshops.</li><li>Prepare Business Requirement Documents (BRD), Functional Specifications, and Use Cases.</li><li>Perform gap analysis between existing systems and proposed solutions.</li><li>Ensure traceability between business requirements and system implementation.</li><li>Ensure completeness, clarity, and consistency of requirements documentation.</li><li>Review system changes and enhancements for alignment with business objectives.</li><li>Provide analytical support during issue resolution and decision-making.</li></ul></li><li><strong>Solution &amp; Integration Support</strong><ul><li>Support solution design discussions with architects and developers.</li><li>Define integration requirements including APIs, data exchange, and workflow automation.</li><li>Assist in reviewing vendor proposals and technical solutions.</li></ul></li><li><strong>Project Delivery Support</strong><ul><li>Support UAT planning and execution.</li><li>Facilitate communication between business users and technical teams.</li><li>Support project teams during implementation and delivery phases.</li><li>Support change management and impact analysis.</li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Conduct stakeholder analysis and requirements elicitation workshops.</li><li>Prepare Business Requirement Documents (BRD), Functional Specifications, and Use Cases.</li><li>Perform gap analysis between existing systems and proposed solutions.</li><li>Ensure traceability between business requirements and system implementation.</li><li>Ensure completeness, clarity, and consistency of requirements documentation.</li><li>Review system changes and enhancements for alignment with business objectives.</li><li>Provide analytical support during issue resolution and decision-making.</li><li>Support solution design discussions with architects and developers.</li><li>Define integration requirements including APIs, data exchange, and workflow automation.</li><li>Assist in reviewing vendor proposals and technical solutions.</li><li>Support UAT planning and execution.</li><li>Facilitate communication between business users and technical teams.</li><li>Support project teams during implementation and delivery phases.</li><li>Support change management and impact analysis.</li></ul><p></p></section>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <h4>Position overview:</h4> <p>The F-16 C/D Electrical and Environmental (E&E) Specialist fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and when necessary, modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of system components.</p> <h4>Duties & responsibilities:</h4> <ul> <li>Performs and supervises aircraft electrical and environmental (E&E) functions and activities performing as an experienced 5 Level Journeyman or 7 Level Craftsman.</li> <li>Troubleshoots, inspects, removes, installs, repairs, modifies, overhauls, and operates aircraft E&E systems, components, and associated support equipment.</li> <li>Uses technical data, wiring diagrams, ohm meters, electronic measuring equipment, GSE and special tools. Expert level in accomplishing and training of wire repair procedures.</li> <li>Uploads operational software, flight programs (OFP) into system components and maintains currency and software upgrade efficiency.</li> <li>Expert level to inspect, analyze and evaluate electrical and environmental systems malfunctions, aircraft heating/air conditioning, avionics cooling, cabin pressure, OBOGS, fire and overheat detection systems, AC power system, DC power system, external power system, lighting system to include exterior, interior, emergency, position lights, anti-collision, formation, slipway lights, taxi light.</li> <li>Remove, install, adjust, operational check, bench-check, service the following: landing gear system, handle, control switches, arresting hook indication/canopy indication/overheat fire/master caution/fuel warning and control systems, anti-skid, brake holding, nose gear steering, secondary flight control, engine bleed air, fire extinguishing system, squibs, fire bottles, start and ignition/air conditioning/pressurization systems and liquid cooling systems.</li> <li>Interprets inspection findings and determines adequacy of corrective actions.</li> <li>Reviews maintenance management publications, time compliance technical orders and procedures for accuracy and currency, confirms corrective actions and accuracy of aircraft maintenance records.</li> <li>Recommends methods to improve equipment performance and maintenance procedures. Acts as quality assurance for the trade.</li> <li>Performs OJT and instruction, supervises and accepts work performed by RAFO technicians, acts as supervisor and mentor for the shop and directs daily maintenance performed.</li> <li>Required to perform assigned tasks within your work center that directly supports necessary functions of this job classification.</li> </ul> <h4>Requirements:</h4> <ul> <li>Recent, 5 years F-16 electrical and environmental (E&E) Block 40 or above experience.</li> <li>Very experienced 2A6X6 5 level or 7 skill level or equivalent with proven record of F-16 flightline (Organizational) or back shop (Intermediate) maintenance environment.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma or equivalent required.</li> <li>Current passport.</li> <li>Clearance requirements: Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</li> </ul> <h4>Preferences:</h4> <ul> <li>Air Force AFSC 2A656 or 2A676 with F-16 Block 30/50 experience.</li> <li>Block 50 experience.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><ul><li><b>Identify and generate new business opportunities.</b></li><li><b>Develop and maintain relationships with corporate clients.</b></li><li><b>Promote and sell ERP, Accounting, HR, Inventory, POS, and other software solutions.</b></li><li><b>Conduct client meetings and software demonstrations.</b></li><li><b>Understand customer requirements and recommend suitable solutions.</b></li><li><b>Prepare quotations, proposals, and sales contracts.</b></li><li><b>Follow up with prospects until the sales process is completed.</b></li><li><b>Achieve monthly and annual sales targets.</b></li><li><b>Maintain accurate records in the CRM system.</b></li><li><b>Coordinate with the technical team during implementation.</b></li><li><b>Provide excellent after-sales support and maintain customer satisfaction.</b></li><li><b>Stay updated on market trends and competitor activities.</b></li><li><b>Prepare weekly and monthly sales reports.</b></li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><br></p><ol><li>Experience in ERP or Accounting Software sales is an advantage.</li><li>Strong communication, presentation, and negotiation skills.</li><li>Good command of English and Arabic.</li><li>Valid Omani driving license (preferred).</li></ol></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for supporting the implementation, configuration, testing, integration, and maintenance of technology solutions and applications. The role works closely with project teams, developers, vendors, and business users to ensure that technical requirements are met, and systems operate efficiently and effectively.</p><p>Assist in the implementation, deployment, and integration of systems and technology solutions. Coordinate with internal servers and network team and explain IP subnetting and classes Basic understanding of IP address subnetting classes Basic understanding of VPN connections type in network Participate in technical design discussions and contribute to solution development activities. Support the configuration, testing, and deployment of applications and system enhancements. Review technical documentation and assist in validating system configurations and functionalities. Support software testing activities and verify that technical requirements are met. Assist in analyzing system issues and troubleshooting application defects. Participate in change request implementation activities, including configuration, testing, and deployment. Support developers and vendors during implementation and post-go-live activities. Monitor system performance and report technical issues, risks, and improvement opportunities. Assist in maintaining technical documentation, procedures, and support guides. Participate in incident management activities and root cause analysis exercises. Ensure compliance with IT standards, security requirements, and established procedures. Collaborate with internal stakeholders to understand business requirements and support solution delivery. Contribute to automation and process improvement initiatives where applicable.</p><p>Act as the primary technical liaison between business stakeholders, vendors, project teams, and internal IT departments to ensure successful project delivery. Schedule, facilitate, and lead project meetings, workshops, requirement-gathering sessions, technical discussions, and status review meetings with business users, vendors, and internal teams. Coordinate with vendor project managers and technical teams to ensure project deliverables, timelines, dependencies, and technical requirements are clearly understood and executed. Manage project communications and provide regular project status updates, risk assessments, and issue reports to management and stakeholders.</p><p>Coordinate with internal Network, Server, Security, Database, and Infrastructure teams to support project implementation and operational requirements. Lead infrastructure readiness activities, ensuring all network, server, storage, security, and connectivity requirements are completed before implementation. Design, review, and maintain IP addressing VLAN configurations, and network segmentation plans. Review and validate server specifications, operating system requirements, network configurations, load-balancing requirements. Work closely with server teams to provision and configure development, staging, and production environments. Coordinate server access, user permissions, service accounts, and infrastructure-related requirements for project teams and vendors. Monitor infrastructure dependencies and ensure all server, network, and security configurations align with project requirements.</p><p>Demonstrate strong understanding of VPN technologies, including Site-to-Site VPN, Client-to-Site VPN, SSL VPN connectivity. Coordinate VPN setup and connectivity between internal systems, cloud environments, third-party vendors, and external partners. Work with network and security teams to implement firewall policies, access control rules, NAT configurations, and secure communication channels. Ensure network connectivity between systems, applications, databases, and vendor environments is established and tested successfully. Coordinate security reviews and ensure all connectivity solutions comply with organizational security standards and policies.</p><p>Serve as the primary point of contact for vendors regarding technical, infrastructure, integration, network, and connectivity requirements. Coordinate daily with vendor project managers and technical teams to review project progress, discuss issues, and drive timely resolution of blockers. Assist vendors in resolving network connectivity issues, VPN configuration issues, server access requests, firewall-related issues, and system integration challenges. Coordinate implementation activities between vendors and internal IT teams throughout project initiation, execution, deployment, and project closure. Ensure vendor access requests, server access, VPN connectivity, and infrastructure requirements are processed and completed within project timelines. Review vendor technical documentation, architecture diagrams, integration specifications, and deployment plans. Validate vendor solutions to ensure compatibility with existing infrastructure, network, security, and enterprise architecture standards.</p><p>Participate in technical solution design discussions and contribute to application, infrastructure, and integration architecture decisions. Coordinate system integrations between internal applications, third-party platforms, cloud services, APIs, databases, and vendor solutions. Review and validate interface specifications, data mapping documents, API integrations, and technical design documents. Support application configuration, deployment, upgrades, enhancements, and Vendor production releases. Ensure all integration requirements are documented, tested, and successfully implemented.</p><p>Provide day-to-day technical coordination and support for project teams, vendors, developers, infrastructure teams, and business users. Monitor system performance, application availability, network connectivity, and project servers infrastructure health. Investigate and troubleshoot application, server, database, network, VPN, and integration-related incidents. Lead incident management, problem management, and root cause analysis activities. Coordinate with support teams and vendors to ensure timely resolution of production issues. Identify recurring issues and recommend corrective and preventive actions.</p><p>Maintain technical documentation, network diagrams, VPN configurations, server inventories, integration documents, and operational procedures. Prepare meeting minutes, issue logs, risk registers, project reports, and technical implementation documents. Ensure compliance with IT governance policies, cybersecurity standards, operational procedures, and regulatory requirements. Support audits, security reviews, and compliance assessments related to infrastructure and project activities.</p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>MINIMUM EDUCATION, QUALIFICATIONS SKILLS</strong></p><p>Education: Bachelor s degree in computer science, Information Technology, Software Engineering, Computer Engineering, or a related field.</p><p>Experience: 0 3 years of experience in Information Technology, Software Development, System Support, System Implementation, or a related field. Fresh graduates with relevant internships or project experience may be considered.</p><p>Special Skills &amp; Knowledge: Basic understanding of software development and system implementation concepts. Knowledge of databases, operating systems, and application support. Familiarity with SDLC concepts and testing methodologies. Strong analytical and problem-solving skills. Good communication and teamwork abilities. Ability to learn new technologies and adapt to changing environments.</p><p></p></section>

<p><h4>Operation MultiTech E&I</h4> <p><strong>Start date:</strong> 1-Jul-2026<br> <strong>End date:</strong> 30-Jun-2027</p> <h4>Working location</h4> <p><strong>Initial location:</strong> Sohar, Oman (on site)<br> <strong>Relocation:</strong> Role will start in Oman then relocate to offshore Qatar in Jan 2027.</p> <h4>Work schedule and allowances</h4> <p><strong>Oman:</strong><br> Location - Sohar on site<br> Schedule - 5 days per week, 8 hours per day<br> Allowance - Full board accommodation and transportation provided.</p> <p><strong>Qatar:</strong><br> Role relocates to Qatar on 1 Jan 2027<br> Location - Qatar offshore<br> Schedule - 28/28, 12 hours per day</p> <h4>Key responsibilities and accountabilities</h4> <p>During the onshore construction and commissioning phase on yard, the start-up MultiTech will assist the Start-up Supervisor with:</p> <ul> <li>The witness of the Operational Test Procedure (OTP).</li> <li>The execution of the OTP.</li> <li>The execution of the commissioning (leak test, function test, etc.).</li> <li>Preparation of the start-up procedures and the operation.</li> </ul> <p>The Multi-Tech will accommodate with the project on the offshore temporary accommodation. They will follow the commissioning activities as seconded to the Start-up Supervisor as Field Operation representative and prepare the first oil of the new wellhead platform.</p> <h4>Activities</h4> <ul> <li>Identify, in conjunction with the Start-up Supervisor and Operating Authority (OTL), the procedures and precautions to be taken to provide a safe place for the intended start-up activities.</li> <li>Assist the Start-up Supervisor and finalize on-site start-up procedures, sharing them with the Field Operation core crew to make them applicable on site.</li> <li>Assist the Start-up Supervisor to finalize a detailed start-up sequence in close collaboration with the core Field Operation crew on site.</li> <li>Participate in the preparation of the kick-off meeting for start-up activities.</li> <li>Participate in the preparation of the risk assessment of the activities to be performed during the start-up.</li> <li>Prepare, as Area Authority, the potential Permit to Work required for start-up activities associated with Company Only Fluid (COF).</li> <li>Liaise with the Start-up Supervisor on the main site to coordinate the progress of the start-up.</li> <li>Contribute to updating the start-up monitoring tools as required with the Start-up Supervisor.</li> <li>Take part in every Permit to Work meeting related to start-up and commissioning activities.</li> <li>Witness, along with the Start-up Supervisor, the Operational Tests performed by commissioning and liaise with the Field Operation team.</li> <li>Assist the Start-up Supervisor in preparing the request and order for required start-up tools, and ensure proper storage and identification of the start-up tools.</li> <li>Prepare the operation of first fill with the commissioning team.</li> <li>Prepare arrival on site (PTW, KOM, JSA, etc.) of vendors involved in the start-up of the facility.</li> <li>Identify and check the critical valves (especially on brownfield) used as battery limits for leak tests.</li> <li>Check any type B and C punch list and investigate if requested by the Start-up Supervisor, Field Operations Lead, the OTL or the OIM.</li> <li>Ensure the list of inhibitions and isolations, with associated certificates and risk assessments, is properly signed and validated by the relevant persons.</li> <li>Be aware of potential downgraded situations on site and update the core crew on any changes associated with start-up activity.</li> <li>Participate in HazId, JSA and Pre-Startup Safety Reviews of new facilities.</li> <li>Prepare, update and check on site the red line mark-up P&ID at the end of the construction and during commissioning phase. Ensure a set of up-to-date P&IDs is always available for the Field Operation team.</li> <li>Contribute to the Incident Free initiative on site by reporting any anomaly, defect, bad practice, lack of equipment or lack of competence.</li> <li>Assist the Start-up Supervisor to ensure all operators on site are well aware of the new safety systems and process upgrades brought by the project.</li> <li>Maintain local signage and barriers adapted to the situation over time, with special attention to the boundaries of the SimOps area, the exit walkways and scaffolds.</li> <li>Assist the teams with procedures for mechanical isolations, de-isolations and draining.</li> <li>Suggest improvements and request modifications if Operating Procedures are not satisfactory.</li> <li>All staff must be willing to participate in crisis response training and to assist during emergency response situations if required.</li> </ul> <h4>Context and environment</h4> <p>Position will be full-time onshore work during engineering and construction in yards. Offshore rotation during HUC and start-up. Travel between sites will be necessary. During the offshore phase work will be on a rotation of 28 days on / 28 days off offshore Al Shaheen Field.</p> <p>The position will transition to Offshore FOPS on completion of the project.</p> <h4>Requirements</h4> <h4>Minimum qualifications and experience</h4> <ul> <li>Education: Higher National Diploma or certificate (equivalent to A-levels + 2 years' study).</li> <li>Industry experience: Minimum 5 years' experience in oil and gas production operations.</li> <li>COMPEX Certification is mandatory.</li> <li>5+ years of experience in offshore oil and gas production facilities.</li> <li>Previous experience with national oil companies or large international operators is an advantage.</li> </ul> <h4>Technical, personal and linguistic competencies</h4> <ul> <li>Ability to work independently while maintaining good relations with colleagues and others.</li> <li>Proven sense of operational responsibility and courage to intervene and challenge.</li> <li>Previous experience with offshore operation, production, oil and gas, preferably former control room operators.</li> <li>Willingness to work flexible shifts and extended shifts as required.</li> <li>Fluent in written and spoken English.</li> <li>Computer literate.</li> </ul> <h4>Professional and HSE certifications</h4> <ul> <li>Basic firefighting.</li> <li>T-BOSIET, H2S training OPITO approved.</li> <li>PTW training and JSA awareness.</li> <li>Confined Space Entry and Rescue, Authorized Gas Tester.</li> <li>Lifting and rigging training, manual handling training.</li> <li>Radiation protection awareness.</li> <li>Hazard and energy control Lockout and Tagout awareness.</li> </ul> <h4>Additional technical information</h4> <h4>Multi Technician - Instruments</h4> <ul> <li>Thorough knowledge of instrumentation and measurement signal principles, safety systems (ESD / Fire and Gas), field calibration equipment and tools such as Hart Communicators.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Demonstrable evidence of attending and passing a qualification in Small Tube Boring.</li> <li>Some production operator experience preferable.</li> </ul> <h4>Multi Technician - Electrical</h4> <ul> <li>Thorough knowledge of HV and LV equipment such as generators, motors, electrical systems and associated switchgear.</li> <li>Good understanding of how to read electrical circuit diagrams.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Some production operator experience preferable.</li> </ul></p><p></p>

<p><h4>Operation MultiTech E&I</h4> <p><strong>Start date:</strong> 1-Jul-2026<br> <strong>End date:</strong> 30-Jun-2027</p> <h4>Working location</h4> <p><strong>Initial location:</strong> Sohar, Oman (on site)<br> <strong>Relocation:</strong> Role will start in Oman then relocate to offshore Qatar in Jan 2027.</p> <h4>Work schedule and allowances</h4> <p><strong>Oman:</strong><br> Location - Sohar on site<br> Schedule - 5 days per week, 8 hours per day<br> Allowance - Full board accommodation and transportation provided.</p> <p><strong>Qatar:</strong><br> Role relocates to Qatar on 1 Jan 2027<br> Location - Qatar offshore<br> Schedule - 28/28, 12 hours per day</p> <h4>Key responsibilities and accountabilities</h4> <p>During the onshore construction and commissioning phase on yard, the start-up MultiTech will assist the Start-up Supervisor with:</p> <ul> <li>The witness of the Operational Test Procedure (OTP).</li> <li>The execution of the OTP.</li> <li>The execution of the commissioning (leak test, function test, etc.).</li> <li>Preparation of the start-up procedures and the operation.</li> </ul> <p>The Multi-Tech will accommodate with the project on the offshore temporary accommodation. They will follow the commissioning activities as seconded to the Start-up Supervisor as Field Operation representative and prepare the first oil of the new wellhead platform.</p> <h4>Activities</h4> <ul> <li>Identify, in conjunction with the Start-up Supervisor and Operating Authority (OTL), the procedures and precautions to be taken to provide a safe place for the intended start-up activities.</li> <li>Assist the Start-up Supervisor and finalize on-site start-up procedures, sharing them with the Field Operation core crew to make them applicable on site.</li> <li>Assist the Start-up Supervisor to finalize a detailed start-up sequence in close collaboration with the core Field Operation crew on site.</li> <li>Participate in the preparation of the kick-off meeting for start-up activities.</li> <li>Participate in the preparation of the risk assessment of the activities to be performed during the start-up.</li> <li>Prepare, as Area Authority, the potential Permit to Work required for start-up activities associated with Company Only Fluid (COF).</li> <li>Liaise with the Start-up Supervisor on the main site to coordinate the progress of the start-up.</li> <li>Contribute to updating the start-up monitoring tools as required with the Start-up Supervisor.</li> <li>Take part in every Permit to Work meeting related to start-up and commissioning activities.</li> <li>Witness, along with the Start-up Supervisor, the Operational Tests performed by commissioning and liaise with the Field Operation team.</li> <li>Assist the Start-up Supervisor in preparing the request and order for required start-up tools, and ensure proper storage and identification of the start-up tools.</li> <li>Prepare the operation of first fill with the commissioning team.</li> <li>Prepare arrival on site (PTW, KOM, JSA, etc.) of vendors involved in the start-up of the facility.</li> <li>Identify and check the critical valves (especially on brownfield) used as battery limits for leak tests.</li> <li>Check any type B and C punch list and investigate if requested by the Start-up Supervisor, Field Operations Lead, the OTL or the OIM.</li> <li>Ensure the list of inhibitions and isolations, with associated certificates and risk assessments, is properly signed and validated by the relevant persons.</li> <li>Be aware of potential downgraded situations on site and update the core crew on any changes associated with start-up activity.</li> <li>Participate in HazId, JSA and Pre-Startup Safety Reviews of new facilities.</li> <li>Prepare, update and check on site the red line mark-up P&ID at the end of the construction and during commissioning phase. Ensure a set of up-to-date P&IDs is always available for the Field Operation team.</li> <li>Contribute to the Incident Free initiative on site by reporting any anomaly, defect, bad practice, lack of equipment or lack of competence.</li> <li>Assist the Start-up Supervisor to ensure all operators on site are well aware of the new safety systems and process upgrades brought by the project.</li> <li>Maintain local signage and barriers adapted to the situation over time, with special attention to the boundaries of the SimOps area, the exit walkways and scaffolds.</li> <li>Assist the teams with procedures for mechanical isolations, de-isolations and draining.</li> <li>Suggest improvements and request modifications if Operating Procedures are not satisfactory.</li> <li>All staff must be willing to participate in crisis response training and to assist during emergency response situations if required.</li> </ul> <h4>Context and environment</h4> <p>Position will be full-time onshore work during engineering and construction in yards. Offshore rotation during HUC and start-up. Travel between sites will be necessary. During the offshore phase work will be on a rotation of 28 days on / 28 days off offshore Al Shaheen Field.</p> <p>The position will transition to Offshore FOPS on completion of the project.</p> <h4>Requirements</h4> <h4>Minimum qualifications and experience</h4> <ul> <li>Education: Higher National Diploma or certificate (equivalent to A-levels + 2 years' study).</li> <li>Industry experience: Minimum 5 years' experience in oil and gas production operations.</li> <li>COMPEX Certification is mandatory.</li> <li>5+ years of experience in offshore oil and gas production facilities.</li> <li>Previous experience with national oil companies or large international operators is an advantage.</li> </ul> <h4>Technical, personal and linguistic competencies</h4> <ul> <li>Ability to work independently while maintaining good relations with colleagues and others.</li> <li>Proven sense of operational responsibility and courage to intervene and challenge.</li> <li>Previous experience with offshore operation, production, oil and gas, preferably former control room operators.</li> <li>Willingness to work flexible shifts and extended shifts as required.</li> <li>Fluent in written and spoken English.</li> <li>Computer literate.</li> </ul> <h4>Professional and HSE certifications</h4> <ul> <li>Basic firefighting.</li> <li>T-BOSIET, H2S training OPITO approved.</li> <li>PTW training and JSA awareness.</li> <li>Confined Space Entry and Rescue, Authorized Gas Tester.</li> <li>Lifting and rigging training, manual handling training.</li> <li>Radiation protection awareness.</li> <li>Hazard and energy control Lockout and Tagout awareness.</li> </ul> <h4>Additional technical information</h4> <h4>Multi Technician - Instruments</h4> <ul> <li>Thorough knowledge of instrumentation and measurement signal principles, safety systems (ESD / Fire and Gas), field calibration equipment and tools such as Hart Communicators.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Demonstrable evidence of attending and passing a qualification in Small Tube Boring.</li> <li>Some production operator experience preferable.</li> </ul> <h4>Multi Technician - Electrical</h4> <ul> <li>Thorough knowledge of HV and LV equipment such as generators, motors, electrical systems and associated switchgear.</li> <li>Good understanding of how to read electrical circuit diagrams.</li> <li>Thorough knowledge of Ex philosophies and principles used in the petrochemical industry, with participation in and passing of CompEx course (Ex1-4).</li> <li>Some production operator experience preferable.</li> </ul></p><p></p>

<p><h4>Please submit your CV in English and indicate your level of English proficiency.<\/h4>\n<p>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment.<\/p>\n<h4>What this opportunity involves:<\/h4>\n<p>We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<\/p>\n<p>You'll create challenging tasks and evaluation criteria within realistic simulated environments:<\/p>\n<ul>\n <li>Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history<\/li>\n <li>Design tasks from intermediate states of these environments - craft the prompt, define what \"solved\" means, and ensure the task is solvable by an AI agent<\/li>\n <li>Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient<\/li>\n <li>Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust<\/li>\n<\/ul>\n<h4>What this is not:<\/h4>\n<ul>\n <li>Not data labeling<\/li>\n <li>Not prompt engineering<\/li>\n <li>Not writing code from scratch - the agent writes most of the code; you guide and evaluate<\/li>\n<\/ul>\n<h4>What we look for:<\/h4>\n<ul>\n <li>8+ years in software development<\/li>\n <li>Core stack: Python (FastAPI), JavaScript\/TypeScript (React), Docker, Postgres, Kafka, Redis<\/li>\n <li>Experience writing tests (functional, integration)<\/li>\n <li>English proficiency - B2+<\/li>\n<\/ul>\n<h4>Why this is hard:<\/h4>\n<p>Frontier models are already good at coding. Creating a task that genuinely challenges the best models is non-trivial. You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution. Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<\/p>\n<h4>How it works<\/h4>\n<p>Apply? Pass qualification(s)? Join a project? Complete tasks? Get paid.<\/p>\n<h4>Effort estimate<\/h4>\n<p>Tasks for this project are estimated to take 30 hours to complete, depending on complexity. This is an estimate and not a schedule requirement; you choose when and how to work. Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<\/p><\/p><p><\/p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What if you could shape a career as unique as you? </p> <p> At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons.<br> </p> <p> <span>Protection Engineer who will be responsible for managing Protection activities for projects shall undertake the following actions</span> </p> <ul> <li>Bachelor s degree in Engineering or related field.</li> <li>Professional engineering license preferred.</li> <li>In-depth knowledge of electrical systems, codes, and standards.</li> <li> <p>Proven experience in project management and team leadership. <br> </p> <p> <strong>Imagine a better future for you and a better future for us all. </strong> <br> </p> <p>Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? <br> <strong> </strong> </p> <p> <strong>With us, you can. Apply today.</strong> </p> </li> </ul> <ul> <li> <p>Conduct Witness test relay functional test for determining correct operation and sign off the relevant documents. Make appropriate recommendation/resolution for mitigation to Operations, and report to line manager.</p> </li> <li> <p>Perform system studies, provide protection requirements for design, review and sign off one-line, elementary, logic diagrams and work with other discipline engineers - substation engineers, Distribution Field engineers, project engineers, apparatus engineers - to support sub transmission and distribution substation expansion, substation automation and infrastructure replacement projects.</p> </li> <li> <p>Gather and evaluate line data of transmission, sub-transmission, distribution systems, transformer test data, switchgear date, etc. Model systems on appropriate software tool, such as CAPE, perform short circuit studies, and protection coordination studies necessary for completing relay settings, perform relay settings, prepare protection summary, and coordinate relay settings with protection departments. </p> </li> <li> <p>Issue Substation Relays and field Auto recloser settings via relevant relay database to the field, support Test technicians in-servicing or commissioning relay settings, review/approve returned as-left relay setting files, and communicate with Test technicians for making revisions/changes to relay settings as necessary.</p> </li> <li> <p>Drive, Support and Contribute to innovative projects/initiatives such as Protection impact studies due to Distributed Energy Resources (Micro grid, Battery Storage, etc.,), Downed Conductor detection, Arc flash fault duties and Grid Modernization efforts.</p> </li> <li> <p>Ability to analyse information, perform engineering assessments and evaluations and provide reports and recommendations to internal clients and project team members.</p> </li> <li> <p>Experience using application software such as Microsoft Word, Excel, PowerPoint, Access, Visio, and Project.</p> </li> <li> <p>Analyse post-fault event using historical data such as DFR traces, digital relay records, or related data.</p> </li> <li> <p>Support and Reviews advanced power system analyses.</p> </li> <li> <p>Performs field inspections and provides professional field support as necessary during construction phases.</p> </li> <li> <p>Performs investigation of material and system failures</p> </li> <li> <p>On site commissioning, testing and support</p> </li> <li> <p>Other relevant duties assigned by client. </p> </li> </ul></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br>What this opportunity involves: We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br> You'll create challenging tasks and evaluation criteria within realistic simulated environments: Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate What we look for: 8+ years in software development Core stack: Python (FastAPI), JavaScript/TypeScript (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+ Why this is hard: Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution.<br> Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paidEffort estimate Tasks for this project are estimated to take 30 hours to complete, depending on complexity.<br> This is an estimate and not a schedule requirement; you choose when and how to work.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation: Up to $200/hr equivalent , depending on level and pace.<br> Tasks are estimated at ~30 hours each; you set your own schedule.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Senior Core Banking &amp; Payment Systems Specialist is responsible for the administration, support, enhancement, testing, deployment, and continuous improvement of the Bank's Core Banking System (ICBS) and payment systems. The role acts as the primary liaison between business users, IT teams, vendors, and external stakeholders to ensure that all business requirements, system enhancements, regulatory changes, and technical updates are successfully implemented without impacting business operations. The incumbent will manage the full lifecycle of system changes, including requirement analysis, testing, quality assurance, deployment, production support, and vendor coordination for Core Banking, ACH, RTGS, VAT, ERP, and related integrated banking applications.</p><p><strong>2. Duties and Responsibilities</strong></p><p><strong>Core Banking System (ICBS) Management</strong></p><ul><li>Administer, support, and maintain the ICBS Core Banking System.</li><li>Act as the primary point of contact between the Bank and the Core Banking vendor for all technical and functional matters.</li><li>Gather, analyze, and document business requirements for new features, enhancements, and regulatory changes.</li><li>Translate business requirements into functional specifications and coordinate implementation with the vendor.</li><li>Review and validate vendor deliverables to ensure compliance with business requirements.</li><li>Monitor system performance and ensure high availability of Core Banking services.</li><li>Identify opportunities to optimize banking processes through standard ICBS functionalities.</li><li>Evaluate customization requests and recommend the most effective solution.</li></ul><p><strong>Change Management &amp; System Enhancements</strong></p><ul><li>Manage all Core Banking system changes from requirement gathering through production deployment.</li><li>Coordinate the implementation of new functionalities, enhancements, fixes, and patches.</li><li>Ensure all requested changes are configured correctly and aligned with business requirements.</li><li>Conduct impact analysis for all proposed changes before implementation.</li><li>Ensure proper documentation of all system modifications and configurations.</li><li>Participate in Change Advisory Board (CAB) meetings and provide technical recommendations.</li></ul><p><strong>Testing &amp; Quality Assurance</strong></p><ul><li>Deploy patches, upgrades, and enhancements in the test environment.</li><li>Prepare and execute functional, integration, regression, and user acceptance testing.</li><li>Validate that all requested changes function as expected.</li><li>Verify that new changes do not negatively impact existing system functionality.</li><li>Identify, document, and coordinate resolution of defects with vendors and stakeholders.</li><li>Prepare testing reports and deployment readiness recommendations.</li></ul><p><strong>Production Deployment &amp; Support</strong></p><ul><li>Coordinate and execute production deployments in accordance with approved management procedures.</li><li>Ensure successful migration of approved changes from test to production environments.</li><li>Conduct post-deployment validation and system health checks.</li><li>Monitor production systems and resolve issues within agreed service levels.</li><li>Ensure minimal disruption to banking operations during deployments and upgrades.</li><li>Provide after-hours support during critical system implementations and upgrades when required.</li></ul><p><strong>Vendor &amp; Stakeholder Management</strong></p><ul><li>Manage relationships with system vendors and service providers.</li><li>Track vendor performance against agreed SLAs.</li><li>Coordinate issue resolution and enhancement requests with vendors.</li><li>Ensure timely closure of outstanding issues and defects.</li><li>Participate in project meetings and provide technical guidance.</li><li>Work closely with business departments to understand operational needs and provide suitable solutions.</li></ul><p><strong>System Integration &amp; Regulatory Compliance</strong></p><ul><li>Support integrations between Core Banking and other systems including<br>o Digital Banking Platform<br>o AML Systems<br>o CRM Systems<br>o ERP Systems<br>o Government Platforms<br>o Other third-party applications</li><li>Ensure compliance with Central Bank regulations and internal policies.</li><li>Support regulatory reporting and compliance-related system changes.</li><li>Assist in audits, inspections, and compliance reviews.</li></ul><p><strong>Documentation &amp; Reporting</strong></p><ul><li>Maintain system configuration and operational documentation.</li><li>Prepare reports on system performance, incidents, changes, and enhancements.</li><li>Develop and maintain operational procedures and user guides.</li><li>Ensure proper knowledge transfer and documentation for all implemented changes.</li></ul><p><strong>KEY INTERACTIONS</strong></p><ol><li>Internal All internal departments and branches As per operational activities</li><li>External Vendors, Service Providers, Clients As part of operational activities</li></ol><p><strong>Level of external interaction</strong> This position requires a medium level of external interaction</p><p><strong>MINIMUM EDUCATION, QUALIFICATIONS &amp; SKILLS</strong></p><p><strong>Education:</strong> Bachelor s degree in information technology, Computer Science, Information Systems, Software Engineering, or a related field. Professional certifications in Core Banking Systems, Oracle, ITIL, or Project Management are preferred.</p><p><strong>Experience:</strong> Minimum 7 10 years of experience in banking technology. Minimum 5 years of hands-on experience supporting Core Banking Systems. Strong experience working with Core Banking platforms. Experience managing ACH, RTGS, ERP, and other banking payment systems. Experience working with banking vendors and third-party service providers.</p><p><strong>Special Skills &amp; Knowledge:</strong> Banking Operations and Payment Systems. ACH and RTGS Operations. ERP Systems Support. AML System Support SQL and Database Querying. System Integration and API Concepts. Change Management and Release Management. Software Testing and Quality Assurance. Incident and Problem Management. Regulatory and Compliance Requirements. Microsoft Office Applications.</p><p><strong>Business Understanding:</strong> This position requires a medium to high level of business understanding</p><p><strong>HEALTH, SAFETY AND ENVIRONMENT</strong></p><p>This position follows all the HSE procedures as set by the company</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in information technology, Computer Science, Information Systems, Software Engineering, or a related field.</li><li>Professional certifications in Core Banking Systems, Oracle, ITIL, or Project Management are preferred.</li><li>Minimum 7 10 years of experience in banking technology.</li><li>Minimum 5 years of hands-on experience supporting Core Banking Systems.</li><li>Strong experience working with Core Banking platforms.</li><li>Experience managing ACH, RTGS, ERP, and other banking payment systems.</li><li>Experience working with banking vendors and third-party service providers.</li><li>Banking Operations and Payment Systems.</li><li>ACH and RTGS Operations.</li><li>ERP Systems Support.</li><li>AML System Support</li><li>SQL and Database Querying.</li><li>System Integration and API Concepts.</li><li>Change Management and Release Management.</li><li>Software Testing and Quality Assurance.</li><li>Incident and Problem Management.</li><li>Regulatory and Compliance Requirements.</li><li>Microsoft Office Applications.</li><li>This position requires a medium to high level of business understanding</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Sr. Specialist Business Applications Grade Stream People, Technology &amp; Culture Function IDS &amp; CI - Digital Delivery Location Oman Muscat Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Manager Digital Delivery Direct reports - Job purpose The Senior Solution Architect owns the architecture, design standards, delivery practices, and governance of the company s enterprise business applications. The role sets how solutions are designed, built, deployed, and integrated ensuring they are secure, scalable, well-governed, and reliably delivered into production. The Enterprise Document and Records Management System (EDRMS) is a core platform within the architect s portfolio. The role provides technical direction across the application landscape: it defines reference architectures and CI/CD and deployment standards, governs solution designs (internal and vendor), and ensures changes meet security, records, and data-governance requirements. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main Tasks and Responsibilities Solution Architecture &amp; Design Define and maintain reference architectures, solution designs, integration designs, and data-flow diagrams for the enterprise application portfolio, including EDRMS. Translate business requirements into secure, scalable, and maintainable technical solutions, selecting appropriate patterns and technologies. Provide hands-on design, prototyping, and proof-of-concept work to validate architecture decisions and de-risk delivery. Architecture Governance &amp; Standards Define, maintain, and enforce solution-design, coding, and integration standards and technical guardrails across applications. Operate design-authority / solution-review gates: review and approve internal and vendor technical designs against architecture, security, and data-governance principles. Maintain Architecture Decision Records (ADRs) and ensure changes follow change-management, access-control, audit, and IT-governance requirements; provide architecture input to audits and assurance reviews. Delivery Standards &amp; CI/CD Define the CI/CD strategy and standards (e.g. Azure DevOps, GitLab CI, GitHub Actions) covering source control, branching, automated build/test, code quality, and artifact management. Set expectations for automated testing and security scanning (SAST/DAST/dependency) within pipelines, and govern adherence across teams and vendors. Guide engineers and vendors in implementing pipelines to the agreed standard, and review delivery practices for quality and consistency. Deployment &amp; Release Strategy Own deployment architecture and environment strategy (development, test, staging, production), including environment promotion and configuration management. Define release governance deployment runbooks, rollback/back-out plans, and post-deployment verification and oversee controlled releases of significant changes. Coordinate change windows and cutovers with IT Operations, Infrastructure, Database, Cybersecurity, and vendor teams to protect availability and performance. EDRMS / ECM Platform Architecture Own the architecture and roadmap of the EDRMS platform (e.g. OpenText Documentum, D2, Content Server, or similar) as a core managed platform. Design document-management workflows, metadata models, taxonomy, classification, retention rules, access controls, and integration points, ensuring records compliance and data quality. Direct migration, indexing, metadata improvement, OCR, and search-optimisation activities, working with specialist engineers and vendors for deep configuration and build. Integration Architecture Design secure, resilient integrations between EDRMS / business applications and ERP (e.g. SAP), SharePoint/M365, databases, portals, and identity-management systems using APIs, web services, and connectors. Define standards for authentication, error handling, monitoring, and data quality across integrations. Technical Leadership, Support Oversight &amp; Vendor Management Act as technical authority and escalation point for complex incidents, performance problems, and integration issues, ensuring solutions are supportable and root causes are addressed without owning first-line incident resolution. Coordinate with vendors, review technical deliverables for quality and compliance, and follow up on support and enhancement activities. Provide technical guidance and knowledge transfer to internal teams and business users, and identify opportunities to automate manual processes and improve usability, efficiency, and reliability. Perform other related duties as assigned. Key interactions Internal: IDS &amp; CI function, IT Operations, Infrastructure, Database, and Cybersecurity functions, business application owners and users across all OQEP functions and streams. External: Software and platform vendors (EDRMS/ECM vendors, ERP vendors), system integrators, specialist technical consultants. Notable Working Conditions. Office environment, intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education Requirements Required: Bachelor's degree in Computer Science, Information Technology, Software Engineering, or related field. <em>Preferred: Postgraduate qualification or professional certifications such as TOGAF, Azure Solutions Architect, OpenText/Documentum certification, or equivalent; certifications in DevOps or CI/CD tooling (Azure DevOps, GitLab) are an advantage.</em> Language Excellent knowledge of written, read, and spoken English (required) Background and experience Competencies and skills 6+ years of relevant experience in solution architecture, enterprise applications, or software delivery within a medium to large organization. Demonstrated experience designing and governing enterprise application architectures, including integration and deployment architecture. Hands-on experience with EDRMS/ECM platforms (e.g. OpenText Documentum, D2, Content Server, or similar) is strongly preferred. Experience defining and governing CI/CD pipelines and DevOps practices (Azure DevOps, GitLab CI, GitHub Actions, or equivalent). Experience integrating business applications with ERP systems (e.g. SAP), SharePoint/M365, and identity management systems. Familiarity with architecture governance practices including Architecture Decision Records (ADRs) and design-authority processes. Experience working with vendors and managing technical delivery quality and compliance. Technical Competencies: Strong analytical and problem-solving skills. Excellent communication skills, able to translate technical concepts for business stakeholders. Ability to act as a technical authority and influence design decisions across teams and vendors. Attention to detail and a quality-driven mindset. Self-motivated with the ability to manage multiple initiatives concurrently. Collaborative approach to working with cross-functional and vendor teams. Cultural sensitivity in a multinational environment. Technical Competencies: Solution and enterprise architecture design (reference architectures, integration design, data-flow diagrams). Architecture governance and Architecture Decision Records (ADRs). CI/CD strategy and tooling (Azure DevOps, GitLab CI, GitHub Actions). Automated testing and security scanning (SAST/DAST/dependency scanning). Deployment architecture, environment strategy, and release governance. EDRMS/ECM platform architecture (OpenText Documentum, D2, Content Server, or similar). Document management workflows, metadata models, taxonomy, and records compliance. Integration architecture (APIs, web services, connectors) with ERP, SharePoint/M365, and identity management systems. IT governance, change management, and access control principles. Vendor management and technical delivery review.IT governance, change management, and access control principles. Vendor management and technical delivery review.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: ICT Projects Business Analyst Reports To: ICT Projects Manager / IT Manager</p><p>Number of Vacancies: 2 Positions Salary Range: OMR PHONE_NUMBER per month Work Location: All Governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>The ICT Projects Business Analyst is responsible for supporting the planning, analysis, and implementation of ICT projects by gathering business requirements, analyzing business processes, and coordinating with stakeholders to ensure that technology solutions align with organizational objectives. The role supports successful project delivery through effective communication, documentation, and business analysis activities.</p><p>Key Responsibilities</p><ul><li>Gather, analyze, and document business and functional requirements for ICT projects.</li><li>Work closely with business users to understand operational needs and recommend appropriate technology solutions.</li><li>Assist in preparing Business Requirement Documents (BRDs), Functional Specifications, process flows, and user stories.</li><li>Support project planning, implementation, testing, and deployment activities.</li><li>Coordinate with project managers, technical teams, vendors, and business stakeholders throughout the project lifecycle.</li><li>Participate in User Acceptance Testing (UAT) and ensure that business requirements are successfully delivered.</li><li>Analyze existing business processes and identify opportunities for process improvement and digital transformation.</li><li>Monitor project progress and assist in tracking project deliverables, milestones, and risks.</li><li>Prepare project documentation, meeting minutes, reports, and presentations.</li><li>Support change management activities, user training, and post-implementation support.</li><li>Ensure project documentation is maintained and updated throughout the project lifecycle.</li><li>Perform any other duties assigned by management within the scope of the role.</li></ul><p>Qualifications</p><p>Bachelor's Degree in Information Technology, Information Systems, Computer Science, Software Engineering, Business Information Systems, Business Administration, or a related field.</p><p>Experience</p><p>Practical Experience: 0 (No prior work experience required) Fresh graduates are welcome to apply.</p><p>Technical Skills</p><ul><li>Basic understanding of Business Analysis principles and methodologies.</li><li>Familiarity with ICT project lifecycle and project management concepts.</li><li>Basic knowledge of business process mapping and process improvement techniques.</li><li>Understanding of Software Development Life Cycle (SDLC) is an advantage.</li><li>Familiarity with Microsoft Office applications, especially Excel, Word, PowerPoint, and Visio.</li><li>Basic knowledge of project management tools such as Microsoft Project, Jira, or similar platforms is an advantage.</li><li>Strong analytical, documentation, and reporting skills.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and critical thinking skills.</li><li>Excellent communication and stakeholder engagement skills.</li><li>Good problem-solving and decision-making abilities.</li><li>Strong organizational and time management skills.</li><li>Ability to work collaboratively within cross-functional teams.</li><li>Attention to detail and commitment to quality.</li><li>Willingness to learn and adapt to changing business and technology environments.</li></ul><p>Working Conditions</p><p>Office-based work environment. Regular coordination with ICT teams, business departments, vendors, and project stakeholders. May occasionally support project implementations, workshops, testing activities, and business meetings as required.</p><p>Application Note : The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age The closing date is 3rd August 2026.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Information Technology, Information Systems, Computer Science, Software Engineering, Business Information Systems, Business Administration, or a related field.</li><li>Practical Experience: 0 (No prior work experience required) Fresh graduates are welcome to apply.</li><li>Basic understanding of Business Analysis principles and methodologies.</li><li>Familiarity with ICT project lifecycle and project management concepts.</li><li>Basic knowledge of business process mapping and process improvement techniques.</li><li>Understanding of Software Development Life Cycle (SDLC) is an advantage.</li><li>Familiarity with Microsoft Office applications, especially Excel, Word, PowerPoint, and Visio.</li><li>Basic knowledge of project management tools such as Microsoft Project, Jira, or similar platforms is an advantage.</li><li>Strong analytical, documentation, and reporting skills.</li><li>Strong analytical and critical thinking skills.</li><li>Excellent communication and stakeholder engagement skills.</li><li>Good problem-solving and decision-making abilities.</li><li>Strong organizational and time management skills.</li><li>Ability to work collaboratively within cross-functional teams.</li><li>Attention to detail and commitment to quality.</li><li>Willingness to learn and adapt to changing business and technology environments.</li><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><span>PIPECARE is seeking <strong>Data Analyst</strong> to join our team in Oman, specializing in the oil and gas industry.<br>PIPECARE provide complete Solutions to all aspects of all aspects of In Line- Solutions in the oil and gas industry and ensure pipeline integrity by providing highly accurate information for Maintenance and Repair Programs.<br> <br> <b>Position Summary</b> <br>General role for the Data Analyst includes identification obstructions in the pipeline. It shall be noted that PIPECARE has Subsidiaries around the world and although Data Analyst reports to Data Analyst Team Leader of that Subsidiary and to the corporate Data Analyst Manager, the responsibility of the Data Analyst is to ensure that all tasks and projects related to local subsidiary are executed according to the plan, corporate standards and policy approved by the Corporate Office.<br> <br> <b>Key Responsibilities &amp; Authorities</b> </span> <ul> <li> <ul> <li> <span>Checking and approving the tool performance during the PTT.</span> </li> <li> <span>Checking the data quality of ILI runs.</span> </li> <li> <span>Caliper Data Analysis.</span> </li> <li> <span>MFL Data Analysis.</span> </li> <li> <span>TFI Data Analysis.</span> </li> <li> <span>Checking and implementing dig verification tasks at sites and preparing relevant reports.</span> </li> <li> <span>Reviewing the software inter phase.</span> </li> <li> <span>Reviewing software user manuals.</span> </li> <li> <span>Preparing/Reviewing DAD quality documentation.</span> </li> <li> <span>To ensure accurate tool sensitivity values are provided to TM in Tool Checklist.</span> </li> <li> <span>To prepare a specific Run assessment report.</span> </li> <li> <span>To identify obstructions in the pipeline; to produce technically valid Preliminary / Final report (if applicable).</span> </li> <li> <span>To produce technically valid Preliminary / Final report.</span> </li> <li> <span>To inform HO-DAD about the results and/or to implement the results into the reports.</span> </li> <li> <span>To ensure that the coordinates are synchronized with the data.</span> </li> <li> <span>To alert the R&amp;D regarding the software problems.</span> </li> <li> <span>To update the documentation.</span> </li> <li> <span>To produce updated standard quality procedures.</span> </li> <li> <span>To alert the DA Team Leader / DA Manager regarding the software problems.</span> </li> <li> <span>Execute all other tasks as requested by DA Team Leader or DA Manager and/or Executive Team within the assigned job role.</span> </li> </ul> </li> </ul> <br> <span> <b>Skills/Experience required.</b> </span> <ul> <li> <ul> <li> <span>Bachelor s degree in engineering/technology, OR related degree (preferred but not limited to GIS Field, petrochemical background, pipeline integrity).</span> </li> <li> <span>Prior certification as ILI ASNT-PQ L2, or L3 Data Analyst in one or more of the following in-line inspection technologies: UTWM, UTCD, EMAT; or the ability to become certified</span> </li> <li> <span>Experience in contacts with clients (report presentations, software trainings etc.)</span> </li> <li> <span>Ability to learn proprietary software platforms; proficiency in Microsoft based applications is a must</span> </li> <li> <span>Database development and implementation experience</span> </li> <li> <span>Process analysis, requirement / functional specification development experience</span> </li> <li> <span>Quality assurance of databases, reporting experience</span> </li> <li> <span>Experience of working on large, complex and multiple databases</span> </li> <li> <span>Proficient in using analytical tools and instruments for instance Excel, Microsoft Access, Minitab and SPSS</span> </li> <li> <span>High ability to work with numbers</span> </li> <li> <span>Strong written and verbal communication skills</span> </li> <li> <span>Analytical mind which is able to process information logically</span> </li> <li> <span>Professional level of English language.</span> </li> </ul> </li> </ul> <p> <strong> <span>Physical and Mental Requirements:</span> </strong> </p> <ul> <li>Lifting and Carrying: Ability to lift and carry up to 50 pounds.</li> <li>Mobility: Must be able to walk and climb to perform duties, including maneuvering within a refinery or plant environment and accessing elevated platforms via ladders and stairwells.</li> <li>Communication: Sufficient clarity of speech and hearing, or other communication capabilities, to communicate effectively.</li> <li>Focus and Multitasking: Ability to maintain focus and multitask effectively.</li> <li>Safety Equipment: Must be able to wear safety equipment as required by the safety department for personal protection, if/where needed in manufacturing environments. </li> <li>Personal Mobility and Reflexes: Sufficient personal mobility and physical reflexes, with or without reasonable accommodations, to perform office duties and travel to off-site locations when necessary.</li> </ul> <p><br></p></div></section>

<p>We are looking for a motivated Business Development and Digital Marketing Executive to join our growing team at Hike Tech LLC, a software and technology company based in Muscat, Oman. Candidates who can join within 15 days are preferred. The role involves two key responsibilities. First, identifying and acquiring new clients for our software and digital product services through cold outreach, networking and relationship building. Second, managing our brand presence across digital channels including Instagram, LinkedIn and WhatsApp. The ideal candidate is comfortable with both closing deals and creating content. You will work directly with the founder and play a key role in driving company growth across the GCC market. Key responsibilities include generating and qualifying leads, reaching out to potential clients via email, WhatsApp, LinkedIn and social media, preparing proposals, following up on opportunities, attending GCC networking events and meetups, managing social media accounts, creating engaging content, building ambassador and referral programs, and reporting on performance and growth metrics on a weekly basis. This is an exciting opportunity to join an early stage technology company and make a real impact on its growth from day one.</p><p>We are looking for a candidate with 1 to 3 years of experience in business development, sales, digital marketing or a related field who is available to join immediately. The ideal candidate has strong communication and negotiation skills in both English and Arabic, and is comfortable with cold outreach and building professional relationships from scratch. The candidate must be self motivated, target driven and able to work independently with minimal supervision. A solid understanding of the GCC market and business culture is essential. Familiarity with social media platforms especially Instagram and LinkedIn is required. An existing network of businesses or decision makers in the GCC is a strong advantage. Experience selling software or digital services, or working with content creators and influencer communities, is also highly desirable. Content creation skills including photography, video editing and Reels production are a bonus. A degree in Marketing, Business Administration or a related field is preferred but not mandatory. What matters most is attitude, drive and the ability to deliver results from day one.</p>

<p>We are looking for a motivated Business Development and Digital Marketing Executive to join our growing team at Hike Tech LLC, a software and technology company based in Muscat, Oman. Candidates who can join within 15 days are preferred. The role involves two key responsibilities. First, identifying and acquiring new clients for our software and digital product services through cold outreach, networking and relationship building. Second, managing our brand presence across digital channels including Instagram, LinkedIn and WhatsApp. The ideal candidate is comfortable with both closing deals and creating content. You will work directly with the founder and play a key role in driving company growth across the GCC market. Key responsibilities include generating and qualifying leads, reaching out to potential clients via email, WhatsApp, LinkedIn and social media, preparing proposals, following up on opportunities, attending GCC networking events and meetups, managing social media accounts, creating engaging content, building ambassador and referral programs, and reporting on performance and growth metrics on a weekly basis. This is an exciting opportunity to join an early stage technology company and make a real impact on its growth from day one.</p><p>We are looking for a candidate with 1 to 3 years of experience in business development, sales, digital marketing or a related field who is available to join immediately. The ideal candidate has strong communication and negotiation skills in both English and Arabic, and is comfortable with cold outreach and building professional relationships from scratch. The candidate must be self motivated, target driven and able to work independently with minimal supervision. A solid understanding of the GCC market and business culture is essential. Familiarity with social media platforms especially Instagram and LinkedIn is required. An existing network of businesses or decision makers in the GCC is a strong advantage. Experience selling software or digital services, or working with content creators and influencer communities, is also highly desirable. Content creation skills including photography, video editing and Reels production are a bonus. A degree in Marketing, Business Administration or a related field is preferred but not mandatory. What matters most is attitude, drive and the ability to deliver results from day one.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Ingénieur développement FPGA JD F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Dans un contexte de forte croissance des secteurs aéronautique et défense, nous recherchons un ingénieur de développement FPGA pour travailler avec nous sur des produits passionnants et de haute technologie.<br>Vous travaillerez sur des développements de fonctions FPGA, réaliserez des vérifications par simulation et participerez à des intégrations sur carte électronique en laboratoire.<br>Vos missions vous permettront d'échanger avec des ingénieurs système et logiciel afin de trouver les meilleures solutions, et serez intégré dans une équipe d'ingénieurs FPGA passionnés.<br>Vous serez amené à travailler sur différentes cibles : Microchip, Altera, Xilinx, sur des FPGA au coeur de nos produits. Vous découvrirez le domaine passionnant de la navigation inertielle et des récepteurs GNSS !<br>Rejoignez-nous !</p><br><br><p>Les missions principales :<br>- En collaboration avec les autres membres de l'équipe, participer à l'élaboration de l'architecture du FPGA, à la spécification des blocs fonctionnels et à la définition de la stratégie de vérification, <br>- Coder et simuler les différents blocs fonctionnels en langage HDL<br>- Instancier et tester le bon fonctionnement du bloc sur FPGA<br>- Remonter les informations au responsable de projet sur l'avancement des activités<br>- Assurer un support technique aux différentes équipes Métier connexes (Logiciel/Electronique/Système)</p><br><br><p>Ingénieur-e en électronique avec une spécialisation FPGA/HDL :<br>- Connaissance d'un langage de description HDL (Verilog, SystemVerilog ou VHDL).<br>- Connaissance d'un outil de simulation RTL, et d'un outil de synthèse placement/routage sur FPGA.<br>- Une première expérience avec les contraintes/analyses de timing est souhaitable<br>- Une connaissance de l'outil de gestion de configuration Git est un plus <br>compétence transversales / savoir être :<br>- organisé et rigoureux<br>- autonome<br>- bon relationnel, bonne communication</p><br><br><br> </div>