Ship Mechanic Jobs

<p>Under direct supervision, trains and becomes familiar with the chemical hygiene plan and the current HSE laboratory safety standards. Follows prescribed safety rules and regulations in performing assigned duties. Performs duties to conduct prototype or laboratory tests following prescribed procedures. Learns to build equipment and/or perform basic material or environmental tests using basic techniques with electrical/electronic, chemical, and mechanical equipment. Learns to document test data for reporting purposes. Maintains files and documentation related to test equipment and test results of equipment. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Skills typically through eight (8) hours of college chemistry (preferred).</p><p><strong>Desired Candidate Profile</strong></p>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .

<p>Conduct routine plant rounds and inspect assigned process areas. Support system walk-downs, punch-list clearance and mechanical completion activities. Participate in flushing, blowing, loop checking, leak testing and functional testing during commissioning. Perform equipment and process line-ups according to approved operating procedures. Operate field equipment associated with the reduction shaft/reactor, process gas circuit, Process Gas Heater and material-handling systems. Start and stop pumps, fans and other auxiliaries as instructed by the control room. Monitor equipment for leaks, unusual vibration, noise, temperature or other abnormalities. Read local gauges and instruments and communicate field readings to the Panel Operator. Assist during plant start-up, stabilization and shutdown activities. Support equipment isolation and reinstatement in coordination with operations and maintenance. Maintain field logbooks and operating checklists. Follow strict safety precautions when working around natural gas, hydrogen-rich reducing gas and carbon monoxide. Immediately report unsafe conditions, gas leaks, equipment abnormalities and process deviations. Maintain good housekeeping and operational discipline throughout assigned areas.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 1 year of relevant experience for degree holders or 4 years for diploma holders.</li><li>At least 1 year as a Shift Field Operator in an industrial process plant.</li><li>Experience in HYL/Energiron DRI, Midrex DRI, fertilizer, petrochemical or similar gas-based process plants is preferred.</li><li>Basic understanding of DRI processes, PGH, natural-gas handling and water-treatment systems.</li><li>Ability to understand P&amp;IDs, equipment identification and operating procedures.</li><li>Knowledge of industrial safety, PTW and LOTO practices.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><strong>Key Responsibilities</strong></span></p><br><ul><li><span>Provide project management support and mechanical engineering guidance for industrial facilities and infrastructure projects.</span></li><li><span>Support the development and maintenance of engineering standards, specifications, and procedures.</span></li><li><span>Monitor contractor performance to ensure work is completed in accordance with approved drawings, specifications, quality standards, and project requirements.</span></li><li><span>Manage and control site activities to achieve project objectives within approved schedule and budget constraints.</span></li><li><span>Prepare and present project progress reports, forecasts, and status updates to management.</span></li><li><span>Lead projects through all project phases, from concept and scope development through technical evaluation, execution, commissioning, and handover.</span></li><li><span>Coordinate engineering activities and pre-operational testing required for successful commissioning and start-up.</span></li><li><span>Evaluate proposed projects and provide technical recommendations.</span></li><li><span>Prepare technical reports, specifications, and supporting project documentation.</span></li><li><span>Monitor and assess contractor performance and compliance with project requirements.</span></li><li><span>Follow instructions and guidance provided by the designated Project Manager or Engineer-in-Charge.</span></li><li><span>Ensure compliance with applicable health, safety, environmental, and quality standards throughout project execution.</span></li></ul> a { text-decoration: none; color: #464feb;}tr th, tr td { border: 1px solid #e6e6e6;}tr th { background-color: #f5f5f5;}<br><p><span><strong>Qualifications</strong></span></p><br><ul><li><span>Bachelor's degree in Mechanical Engineering.</span></li><li><span>Master's degree in Engineering, Management, or a Project Management certification is advantageous.</span></li><li><span>Chartered Engineer status is considered an advantage.</span></li></ul><p><span><strong>Experience &amp; Skills</strong></span></p><br><ul><li><span>Minimum 10 years of project, design, and engineering experience within heavy industrial environments.</span></li><li><span>Experience in brownfield industrial projects is preferred.</span></li><li><span>Strong knowledge of project management principles and practices.</span></li><li><span>Proficiency in SAP and Microsoft Office applications (Word, Excel, PowerPoint).</span></li><li><span>Working knowledge of engineering and drafting software such as AutoCAD.</span></li><li><span>Experience with project planning software such as Microsoft Project and/or Primavera.</span></li><li><span>Sound understanding of budgets, contractual requirements, business processes, and organizational decision-making.</span></li><li><span>Experience supervising installation and commissioning of bulk material handling equipment, including conveyors and associated static and rotating equipment.</span></li><li><span>Proven experience managing contractors and multidisciplinary project teams.</span></li><li><span>Strong written and verbal communication skills, including technical reporting.</span></li><li><span>Demonstrated decision-making, coordination, and stakeholder management capabilities.</span></li><li><span>Knowledge of standard contract terms and conditions.</span></li><li><span>Working knowledge of industrial safety practices and project execution requirements.&nbsp;</span></li></ul><br><p><span><strong>Moving forward together</strong></span></p><br><p><span>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</span></p><br><p><span>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</span></p><br><p><span>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</span></p><br> </div>

<p>Role &amp; responsibilities Preventive, Breakdown, Corrective and Running Maintenance of packing machinery and associated equipment to ensure maximum reliability and operational efficiency. Troubleshooting, repair, overhauling, alignment, and restoration of high-speed packaging machines used in Biscuits, Chocolate, and Snacks production lines. Carrying out machine changeovers for different product and pack formats within targeted timelines. Calculating machine ratios, product pitch settings, timing adjustments, and machine parameters required for changeovers. Designing, fabricating, modifying, and installing change parts and machine components as required. Maintenance and troubleshooting of Horizontal Flow Wrappers including Omori, Multipack, Unipack, Syntegon, Bosch, Cavanna, and Makewell machines. Maintenance and troubleshooting of Vertical Form Fill Seal (VFFS) machines including Bosch and TNA. Maintenance and calibration support for Checkweighers, Metal Detectors, Thermal Transfer Ribbon (TTR) Printers, Continuous Inkjet (CIJ) Printers, Labeling Systems, and Conveyor Systems. Supporting project teams during installation, commissioning, trials, and optimization of new packaging equipment. Maintaining machine history cards, maintenance logs, breakdown records, and spare parts consumption records. Participating in technical discussions, continuous improvement initiatives, OEE improvement projects, and downtime reduction programs. Assisting in Engineering Stores management and identification of critical spare parts requirements. Performing workshop activities including fabrication, machining, fitting, and modification of machine components as required. Maintaining safe and hygienic working conditions in compliance with GMP, GHP, HACCP, Food Safety, and company safety procedures. Carrying out any other jobs/assignments entrusted by the supervisor or management</p><p><strong>Desired Candidate Profile</strong></p><p>Maximizing uptime and availability of packaging machines and auxiliary equipment. Reduction of breakdowns and unplanned downtime. Efficient execution of machine changeovers Improvement in Overall Equipment Effectiveness (OEE). Compliance with preventive maintenance schedules. Reduction in packaging material wastage. Proper documentation and maintenance records. Adherence to GMP, GHP, Food Safety, and Safety requirements. Continuous improvement of plant and machinery performance. ITI Mechanical/Fitter/Welder from reputed Technical Training Institute. Min 5 years experience in maintaining high speed packaging lines and process equipment in FMCG/ Pharmaceutical / Food industries. Proven experience in troubleshooting, machine overhauling, machine setup, and changeover management. Hands-on experience in manufacturing, modification, and fitting of machine change parts. Experience with Horizontal Flow Wrappers (Omori, Multipack, Unipack, Syntegon, Bosch, Cavanna, Makewell) and VFFS Machines (Bosch, TNA). Experience in maintaining Checkweighers, TTR Printers, CIJ Printers, Metal Detectors, and Conveying Systems. Maximum age of 35 years.</p>

<p> <strong>Greetings from SPK HR Services!!!</strong> </p> <br> <p> <strong>Urgent requirement from Oman, Long term job opportunity!!!</strong> </p> <br> <p> </p> <p> <strong>Position:</strong> Project Engineer PEB (Pre-Engineered Buildings)</p> <p> <strong>Experience:</strong> 47 years in PEB / Structural Steel Projects </p> <br> <p> <strong>Role &amp; responsibilities</strong> </p> <br> <p> </p> <ul> <li>The Project Engineer PEB is responsible for planning, coordinating, executing, and monitoring Pre-Engineered Building projects from engineering and fabrication through site installation and handover.</li> </ul> <br> <ul> <li>The role requires close coordination with clients, consultants, design teams, fabrication teams, suppliers, and site contractors to ensure projects are completed safely, on time, within budget, and according to approved specifications.</li> </ul> <br> <p> <strong>Preferred candidate profile</strong> </p> <p> </p> <ul> <li>Bachelors Degree in Mechanical Engineering or Structural Engineering.</li> <li>47 years of experience in PEB, structural steel, or industrial building projects.</li> <li>Good knowledge of PEB design, fabrication, and erection processes.</li> <li>Knowledge of structural steel materials, connections, cladding systems, and erection methods.</li> </ul> <br> <p> <strong> Other Benefits:</strong> </p> <br> <ul> <li> <strong>Monthly Salary: INR 99K to 1.20L</strong>, depending on experience and qualifications.</li> <li>Annual Air Ticket: One air ticket per year as per company policy.</li> <li>Annual Leave: 30 days paid annual leave.</li> <li>Accommodation and transportation will provide</li> <li>Food / Allowance will be provided</li> </ul>

<ul><li><p>Review commissioning plans, test procedures, inspection records, pre-commissioning documentation, and acceptance-related submissions.</p></li><li><p>Witness start-up tests, pre-commissioning, commissioning, reliability runs, performance tests, and system readiness activities.</p></li><li><p>Coordinate commissioning interfaces with discipline engineers, contractors, grid/interface parties, QA/QC, HSE, and project management teams.</p></li><li><p>Verify test results, commissioning records, punch list status, non-conformances, and readiness for handover or taking-over activities.</p></li><li><p>Support performance verification for wind, solar PV, BESS, electrical systems, and associated infrastructure as applicable.</p></li><li><p>Prepare commissioning inputs for progress reports, technical reviews, close-out reports, and acceptance documentation.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related discipline.</p></li><li><p>Minimum 10 years of experience in commissioning power generation, renewable energy, substations, grid-connected assets, or similar infrastructure projects.</p></li><li><p>Experience with start-up tests, reliability runs, performance tests, commissioning documentation, and acceptance procedures.</p></li><li><p>Experience with wind, solar PV, BESS, or HV/MV electrical systems is preferred.</p></li><li><p>Strong knowledge of commissioning sequencing, test witnessing, punch list management, and technical reporting.</p></li><li><p>Strong coordination, problem-solving, and stakeholder communication skills.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun. <br>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p><br></p><p><strong>Scope of Position</strong><br>The Duty Technician is responsible for the daily operation of the engineering department and for ensuring that the department is operated in the safest and most efficient manner. The Duty Technician will assume the responsibilities of the Duty Engineer during his absence.</p><p><strong>Departmental:</strong></p><ul><li>Maintain proper and safe condition of all Plant, Plant Rooms, Equipment and Work areas.</li><li>Comply with all Fire, Life, Health, and Safety Standards.</li><li>To be conversant with the Hotel Emergency Procedures.</li><li>Perform Emergency Response Team duties as required.</li><li>Personal presentation will be clean, neat, and tidy always.</li><li>Be courteous, professional, and service orientated when dealing with Guest, Patrons, and Fellow Staff Members.</li><li>Assist Guests, Patrons, and Fellow Staff Members as and when appropriate.</li><li>Undertake specific duties and projects when assigned.</li><li>Activity support Training Programs.</li><li>To carry out work in accordance with The Hotel Planned Maintenance Program.</li><li>Familiarize himself with the technical details of all Plant and Services relating to the Hotel.</li><li>Work shifts as designated.</li><li>Maintain, repair, check and record equipment relating to:<ul><li>Guest Facilities</li><li>Plant Rooms</li><li>Air Conditioning Equipment</li><li>Refrigeration Equipment</li><li>Fire, Life, Health, and Safety</li><li>Electrical and Mechanical Services</li><li>Plumbing and Heating</li><li>Entertainment Equipment</li><li>Kitchens</li><li>Lighting</li><li>Furniture, Fittings and General Equipment</li></ul></li><li>Actively support and assist the Duty Engineer</li></ul><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun. <br>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p><b>Brief Posting Description </b></p> <p>The Engineer Crushing &amp; Mills Maintenance is responsible for the maintenance, reliability, availability, and performance optimization of crushing, grinding, milling, screening, conveying, and associated plant equipment within mining and mineral processing operations.The role ensures safe, reliable, and cost-effective operation of crushing and milling assets through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses.</p> <p>Detailed Description </p> <p>CRUSHING &amp; MILLS MAINTENANCE MANAGEMENT</p> <p>Perform maintenance activities for crushing, grinding, screening, milling, conveying, and auxiliary plant equipment.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor plant equipment condition and recommend corrective actions.</p> <p>Ensure compliance with OEM recommendations and maintenance standards.</p> <p>Support long-term equipment lifecycle management initiatives.</p> <p>Provide technical guidance on maintenance planning and execution.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Perform reliability improvement initiatives for crushers, mills, screens, conveyors, feeders, pumps, and associated equipment.</p> <p>Analyze equipment failures and identify reliability improvement opportunities.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify bad actors and implement corrective action plans.</p> <p>Develop reliability-focused maintenance strategies.</p> <p>Monitor equipment performance against reliability KPIs.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and maintenance budgets.</p> <p>Review preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task content.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure maintenance work orders are properly executed and closed in SAP PM.</p> <p>Improve work management processes and maintenance effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Perfom preparation and execution of crusher, mill, and plant shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, and schedules.</p> <p>Coordinate contractors and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical-path activities.</p> <p>Ensure shutdown activities comply with safety and quality requirements.</p> <p>Conduct post-shutdown reviews and lessons learned sessions.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure mechanical integrity of critical crushing and milling equipment.</p> <p>Monitor wear-life performance of liners, crushers, mill components, screens, and conveying systems.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>TECHNICAL SUPPORT &amp; TROUBLESHOOTING</p> <p>Perform advanced troubleshooting support for major equipment failures.</p> <p>Review vibration analysis, thermography, lubrication analysis, and condition monitoring reports.</p> <p>Support operations in resolving equipment performance issues.</p> <p>Evaluate equipment modifications and engineering improvements.</p> <p>Review OEM recommendations and technical reports.</p> <p>Support commissioning and startup of new equipment.</p> <p>CONTINUOUS IMPROVEMENT</p> <p>Coordinate continuous improvement initiatives to improve equipment availability and throughput.</p> <p>Identify opportunities to reduce maintenance costs and unplanned downtime.</p> <p>Implement Lean Maintenance and reliability improvement methodologies.</p> <p>Develop business cases for equipment upgrades and reliability projects.</p> <p>Track benefits realization from improvement initiatives.</p> <p>Promote best practices across maintenance and operations teams.</p> <p>SAFETY, HEALTH, ENVIRONMENT &amp; QUALITY</p> <p>Coordinate a strong safety culture within maintenance activities.</p> <p>Ensure compliance with company HSE policies and statutory requirements.</p> <p>Participate in incident investigations, audits, and risk assessments.</p> <p>Ensure maintenance activities are carried out in accordance with approved procedures.</p> <p>Support implementation of corrective and preventive actions.</p> <p>Ensure compliance with quality and asset management standards.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 5+ years or Higher Diploma with 10+ years of experience in a Concentrator Plant/related process plant with similar type of equipment</p> <p> 5+ years of experience in the mining/processing industry or related.</p> <p> Proven track record of successfully managing maintenance in large-scale processing maintenance</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Six-sigma (BB)</p> <p><br></p>

<p>Perform TIG and MIG/MAG welding as per project specifications and required welding procedures. Weld and fabricate components made from mild steel, carbon steel, stainless steel and aluminium as required. Read and understand technical drawings, fabrication drawings, dimensions, and welding symbols. Prepare, fit, align, and tack-weld components before final welding. Set up welding machines and select appropriate welding parameters, gases, electrodes, and consumables. Perform welding in required positions, including horizontal, vertical and overhead positions. Inspect welds for proper penetration, alignment, appearance, and defects. Identify and rectify welding defects such as porosity, cracks, undercut, and lack of fusion. Carry out grinding, cutting, cleaning, and finishing of welded components. Maintain welding machines, tools, and equipment in proper working condition. Follow project quality standards, approved welding procedures, and safety requirements. Use appropriate PPE and maintain a clean and safe work area.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: 10th / 12th Pass / ITI / Diploma depending on employer requirement.</p><p>Experience: Preferably 25+ years of relevant TIG/MIG welding experience . Candidates with GCC experience , particularly Oman/UAE , will be preferred. Experience in fabrication, construction, manufacturing, structural steel, piping, or industrial projects is an advantage. ITI/technical certification in Welding, Fabrication, or Mechanical Trade preferred. Candidates with 6G/3G/4G welding certification may be preferred for specialized positions. Ability to read technical/fabrication drawings and welding symbols . Should be able to pass a practical welding test if required by the employer. Must be physically fit and comfortable working in workshops, construction sites, and industrial environments. Good hand-eye coordination, attention to detail, discipline, and teamwork.</p>

<br><ul><li><p>Read and interpret structural fabrication drawings and engineering specifications.</p></li><li><p>Measure, mark, cut, drill, and prepare structural steel materials as per drawings.</p></li><li><p>Fabricate structural steel components such as beams, columns, frames, platforms, supports, stairs, and handrails.</p></li><li><p>Perform fit-up, alignment, leveling, and assembly of structural components.</p></li><li><p>Carry out grinding, edge preparation, and finishing of fabricated components.</p></li><li><p>Coordinate with welders for proper welding and joint preparation.</p></li><li><p>Check dimensions, alignment, and tolerances of fabricated structures.</p></li><li><p>Use measuring tools and fabrication equipment safely and effectively.</p></li><li><p>Ensure fabrication work complies with project specifications and quality standards.</p></li><li><p>Coordinate with QC inspectors, supervisors, engineers, and other fabrication team members.</p></li><li><p>Identify fabrication defects and carry out necessary corrections.</p></li><li><p>Follow company HSE procedures and maintain a safe working environment.</p></li><li><p>Handle materials, tools, and equipment safely during fabrication activities.</p></li><li><p>Complete fabrication activities within project schedules and production targets.</p><br></li></ul><br><p><strong>Desired Candidate Profile</strong></p><ul><li><p>ITI/Diploma in Mechanical, Fabrication, or a related field.</p></li><li><p>2–5 years of experience in structural steel fabrication.</p></li><li><p>Ability to read and interpret structural fabrication drawings.</p></li><li><p>Good knowledge of cutting, fitting, welding preparation, alignment, and dimensional inspection.</p></li><li><p>Strong awareness of <strong>quality standards, safety procedures, and PPE requirements</strong>.</p></li></ul>

<p><h4>Job Description</h4> <p>A reputable and well-established industrial manufacturing company is hiring a sales engineer to be based in Oman.</p> <p>Please note that you must meet all the criteria set out below for your application to be considered. Suitable candidates will be contacted within 5 working days. If you are not contacted by us within that time, please consider your application unsuccessful on this occasion.</p> <p>The main responsibilities will include but are not limited to:</p> <ul> <li>Developing a strong business pipeline, sales forecast, and achieving sales targets.</li> <li>Build and maintain strong relationships with existing and potential customers.</li> <li>Analyse customers’ requirements and recommend strategies to increase revenue and profitability.</li> <li>Prepare and deliver technical presentations explaining products or services to customers.</li> <li>Improve product marketability, profitability, and market share by researching and identifying market opportunities.</li> </ul> <p>To be successful you will need to meet the following:</p> <ul> <li>Bachelor’s degree in Mechanical Engineering.</li> <li>Minimum 2–3 years of relevant experience within the industrial/manufacturing industry.</li> <li>Must have a valid driver’s license.</li> <li>Excellent verbal and written communication skills in English and Arabic.</li> <li>Applicants should be available for face-to-face interviews in the location mentioned above.</li> </ul></p><p></p>

<ul><li><p>Estimation, preparation of quotations, product presentations, post and pre tender review meetings, submissions, follow-ups, negotiations and finalization of AMC.</p></li><li><p>Identifying new markets for other brand equipments and securing the contracts to grab additional market share.</p></li><li><p>Building and maintaining active association with Existing, new customers for business development.</p></li><li><p>Follow up & collect the AMC payments on time from all the assigned accounts.</p></li><li><p>Attaining maximum customer satisfaction by providing efficient after sale service to the customers.</p></li><li><p>Coordination with filed operation team for resolving the technical issues addressed by clients</p></li><li><p>Lead cross-functional coordination with Finance and Commercial teams to streamline post-order processing and ensure accurate and timely delivery of client contractual and commercial requirements.</p></li><li><p>Achieve assigned targets and consistently meet defined KPIs within specified timelines on a monthly and annual basis.</p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Graduate Mechanical / Electrical Engineers with 6+years <strong>OR</strong> Diploma with 12+ years of experience in AMC, Service Sales of elevator, escalators, trav-o-lators, etc.</p></li><li><p>Candidates should possess aggressive sales approach in the market and proven track record of targets achievement. Should also have good negotiation skills in Service sales AMC finalization </p></li></ul>

<ul><li><p>Estimation, preparation of quotations, product presentations, post and pre tender review meetings, submissions, follow-ups, negotiations and finalization of AMC.</p></li><li><p>Identifying new markets for other brand equipments and securing the contracts to grab additional market share.</p></li><li><p>Building and maintaining active association with Existing, new customers for business development.</p></li><li><p>Follow up & collect the AMC payments on time from all the assigned accounts.</p></li><li><p>Attaining maximum customer satisfaction by providing efficient after sale service to the customers.</p></li><li><p>Coordination with filed operation team for resolving the technical issues addressed by clients</p></li><li><p>Lead cross-functional coordination with Finance and Commercial teams to streamline post-order processing and ensure accurate and timely delivery of client contractual and commercial requirements.</p></li><li><p>Achieve assigned targets and consistently meet defined KPIs within specified timelines on a monthly and annual basis.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Graduate Mechanical / Electrical Engineers with 6+years <strong>OR</strong> Diploma with 12+ years of experience in AMC, Service Sales of elevator, escalators, trav-o-lators, etc.</p></li><li><p>Candidates should possess aggressive sales approach in the market and proven track record of targets achievement. Should also have good negotiation skills in Service sales AMC finalization </p></li></ul>

<p>To perform, evaluate, and report Phased Array Ultrasonic Testing (PAUT) on welded joints and critical components during offshore construction and installation activities, ensuring compliance with project specifications, applicable codes, and client requirements , while strictly adhering to offshore HSE standards.</p><h3>Key Responsibilities</h3><p>1. PAUT Inspection Activities</p><p>Perform PAUT inspections on:</p><ul><li>Offshore piping welds (CS / SS / CRA)</li><li>Structural welds and nodes</li><li>Pressure vessels and pipelines (as applicable)</li></ul><p>Ensure inspections are carried out in accordance with:</p><ul><li>Approved PAUT procedures</li><li>Inspection &amp; Test Plans (ITPs)</li><li>Offshore work packs</li></ul><p>2. Equipment Setup &amp; Calibration</p><p>Set up and calibrate PAUT equipment including:</p><ul><li>Phased array probes and wedges</li><li>Encoders and scanners (manual / semi?automated)</li></ul><p>Conduct calibration using:</p><ul><li>Approved reference blocks</li><li>Project?specific calibration standards</li></ul><p>Ensure all NDT equipment has valid calibration certificates</p><p>3. Data Acquisition &amp; Interpretation</p><p>Perform data acquisition and analysis using PAUT software</p><p>Interpret A?Scan, B?Scan, C?Scan and S?Scan data</p><p>Detect, evaluate, and size discontinuities such as:</p><ul><li>Lack of fusion</li><li>Lack of penetration</li><li>Cracks</li><li>Porosity and inclusions</li></ul><p>4. Reporting &amp; Documentation</p><p>Prepare accurate and timely:</p><ul><li>PAUT reports</li><li>Scan plans and data files</li><li>Repair and re?inspection reports</li></ul><p>Ensure full traceability of welds and inspection records</p><p>Support mechanical completion, pre?commissioning, and dossier handover</p>

<p>We are hiring an Auto Electrician for an automobile industry role. The ideal candidate should have hands-on experience in vehicle inspection, car electrician, Auto Electrician, troubleshooting, and repair . Candidates with GCC work experience and Arabic language proficiency will be preferred.</p><p>Key Responsibilities</p><ul><li>Conduct detailed inspections of vehicles to identify mechanical, electrical, and safety-related issues.</li><li>Perform preventive maintenance, servicing, and repair of cars.</li><li>Diagnose vehicle faults using modern diagnostic tools and equipment.</li><li>Inspect engine, transmission, braking, suspension, steering, electrical, and other vehicle systems.</li><li>Identify technical problems and recommend appropriate repair solutions.</li><li>Ensure all vehicles comply with required automotive safety and quality standards.</li><li>Maintain accurate inspection reports, service records, and maintenance documentation.</li><li>Coordinate with technicians and other departments to ensure timely completion of vehicle servicing.</li><li>Follow workplace safety procedures and automotive industry standards</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum 3 + years of relevant experience in automobile inspection, maintenance, servicing, or repair. Strong knowledge of Auto Electrician, diagnostics, and troubleshooting . Arabic language proficiency Speaking, Reading &amp; Writing is mandatory/preferred as per client requirement. Must possess valid educational certificates and supporting documents . Good knowledge of automotive diagnostic tools and equipment. Strong problem-solving and technical troubleshooting skills. Ability to work independently as well as part of a technical team.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 11,000 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br><p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p><span>The role will be responsible for reviewing, coordinating, monitoring, and supervising all MEP and power-related engineering activities across the project lifecycle, ensuring compliance with contract requirements, railway standards, safety regulations, quality expectations, and project schedules</span></p><br><br> Missions/Main Duties <br><ul><li>Review and monitor the design, installation, and commissioning of&nbsp;<em><span>MEP and power systems</span></em>for railway stations, depots, operation control buildings, maintenance facilities, and associated infrastructure.</li><li>Ensure contractor works comply with approved drawings, specifications, contract requirements, safety rules, and relevant railway and building standards.</li><li>Review and provide technical comments on design documents, shop drawings, material submittals, method statements, inspection requests, and testing and commissioning procedures.</li><li>Supervise and monitor site execution of electrical, mechanical, plumbing, drainage, HVAC, fire protection, lighting, earthing, and power distribution works.</li><li>Coordinate interfaces between MEP systems and other railway systems, including civil works, architectural finishes, trackwork’s, signaling, telecommunications, and operational systems.</li><li>Verify electrical load calculations, equipment sizing, cable routing, grounding systems, backup power arrangements, and power distribution layouts.</li><li>Support review of substation, switchgear, transformers, LV panels, emergency power, UPS, and related power infrastructure interfacing with station and building systems.</li><li>Monitor construction quality and ensure installations meet approved quality plans, inspection test plans, and project standards.</li><li>Participate in inspections, testing, commissioning, snagging, defect tracking, and final handover processes</li><li>Identify technical risks, construction issues, and interface conflicts, and recommend practical corrective actions.</li><li>Prepare progress reports, technical observations, non-conformance comments, and engineering review notes for PMC and client management.</li><li>Coordinate with the client, contractors, designers, authorities, operators, and other stakeholders to support timely decision-making and issue resolution.</li><li>Ensure compliance with&nbsp;health, safety, environmental,&nbsp;and&nbsp;railway operational safety&nbsp;requirements throughout project delivery.</li><li>Support value engineering, constructability reviews, and optimization initiatives where appropriate.</li></ul> Profile/Skills <br><ul><li><span>Bachelor’s degree in&nbsp;Electrical Engineering,&nbsp;Mechanical Engineering, or a related engineering discipline. Master’s degree is an advantage</span></li><li>Minimum 10 years <span>of relevant experience in railway project</span></li><li><span>Strong knowledge of building services and electrical power systems in infrastructure projects</span></li><li><span>Familiarity with railway station and depot MEP requirements</span></li><li><span>Understanding of relevant international and local codes, standards, and railway specifications</span></li><li><span>Ability to review technical submittals, drawings, calculations, and commissioning documents</span></li><li><span>Strong site supervision and construction monitoring capability</span></li><li><span>Good coordination skills across multidisciplinary teams and interfaces</span></li><li><span>Excellent written and verbal communication skills</span></li><li><span>Ability to identify risks, resolve technical issues, and support timely project delivery</span></li><li><span>Strong awareness of safety, quality, and compliance requirements</span></li></ul> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Hydraulics &amp; Lubrication Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of hydraulic and lubrication systems across the Copper Concentrator Plant.The role ensures the safe, reliable, and cost-effective operation of hydraulic power units (HPUs), centralized lubrication systems, oil circulation systems, hydraulic cylinders, pumps, motors, valves, accumulators, filtration systems, cooling systems, gear lubrication systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs.The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of hydraulic and lubrication systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, and associated mechanical equipment.The role works closely with Operations, Reliability, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards</p> <p>Detailed Description </p> <p>HYDRAULICS &amp; LUBRICATION MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for hydraulic and lubrication systems associated with the concentrator plant and supporting infrastructure.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, maintenance standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on hydraulic and lubrication maintenance planning, scheduling, and execution.</p> <p>Establish lubrication excellence and contamination control programs across all critical assets.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for hydraulic power units, lubrication skids, gear lubrication systems, pumps, cylinders, valves, accumulators, filtration systems, coolers, and associated equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>Drive oil analysis and contamination control programs for critical plant equipment.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and budgets for hydraulic and lubrication assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>Develop lubrication routes, inspection programs, and condition-based maintenance plans.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of hydraulic and lubrication system shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors, OEM specialists, and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the integrity and reliability of hydraulic and lubrication systems associated with critical plant assets.</p> <p>Monitor performance of lubrication systems, oil circulation systems, filtration units, accumulators, and hydraulic power units.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>Maintain hydraulic cleanliness targets and lubrication management standards.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education:</p> <p> Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is must.</p> <p> Minimum 8 years of experience in hydraulic and lubrication maintenance and reliability engineering is must.</p> <p> Proven track record of successfully managing maintenance and reliability of critical hydraulic and lubrication assets in large-scale mineral processing plants.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage</p> <p> ICML Machinery Lubrication Technician (MLT)</p> <p> ICML Machinery Lubrication Analyst (MLA)</p> <p> Six-sigma (BB)</p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Crushing &amp; Mills Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of crushing, grinding, milling, screening, conveying, and associated plant equipment within mining and mineral processing operations.The role ensures safe, reliable, and cost-effective operation of crushing and milling assets through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses.</p> <p><b>Detailed Description </b></p> <p>CRUSHING &amp; MILLS MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for crushing, grinding, screening, milling, conveying, and auxiliary plant equipment.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor plant equipment condition and recommend corrective actions.</p> <p>Ensure compliance with OEM recommendations and maintenance standards.</p> <p>Support long-term equipment lifecycle management initiatives.</p> <p>Provide technical guidance on maintenance planning and execution.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for crushers, mills, screens, conveyors, feeders, pumps, and associated equipment.</p> <p>Analyze equipment failures and identify reliability improvement opportunities.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify bad actors and implement corrective action plans.</p> <p>Develop reliability-focused maintenance strategies.</p> <p>Monitor equipment performance against reliability KPIs.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and maintenance budgets.</p> <p>Review preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task content.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure maintenance work orders are properly executed and closed in SAP PM.</p> <p>Improve work management processes and maintenance effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of crusher, mill, and plant shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, and schedules.</p> <p>Coordinate contractors and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical-path activities.</p> <p>Ensure shutdown activities comply with safety and quality requirements.</p> <p>Conduct post-shutdown reviews and lessons learned sessions.</p> <p>ASSET INTEGRITY MANAGEME</p> <p>Ensure mechanical integrity of critical crushing and milling equipment.</p> <p>Monitor wear-life performance of liners, crushers, mill components, screens, and conveying systems.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>TECHNICAL SUPPORT &amp; TROUBLESHOOTING</p> <p>Provide advanced troubleshooting support for major equipment failures.</p> <p>Review vibration analysis, thermography, lubrication analysis, and condition monitoring reports.</p> <p>Support operations in resolving equipment performance issues.</p> <p>Evaluate equipment modifications and engineering improvements.</p> <p>Review OEM recommendations and technical reports.</p> <p>Support commissioning and startup of new equipment.</p> <p>CONTINUOUS IMPROVEMENT</p> <p>Drive continuous improvement initiatives to improve equipment availability and throughput.</p> <p>Identify opportunities to reduce maintenance costs and unplanned downtime.</p> <p>Implement Lean Maintenance and reliability improvement methodologies.</p> <p>Develop business cases for equipment upgrades and reliability projects.</p> <p>Track benefits realization from improvement initiatives.</p> <p>Promote best practices across maintenance and operations teams.</p> <p>SAFETY, HEALTH, ENVIRONMENT &amp; QUALITY</p> <p>Promote a strong safety culture within maintenance activities.</p> <p>Ensure compliance with company HSE policies and statutory requirements.</p> <p>Participate in incident investigations, audits, and risk assessments.</p> <p>Ensure maintenance activities are carried out in accordance with approved procedures.</p> <p>Support implementation of corrective and preventive actions.</p> <p>Ensure compliance with quality and asset management standards.</p> <p>CONTRACTOR MANAGEMENT</p> <p>Supervise contractors engaged in shutdowns and maintenance activities.</p> <p>Review of contractor performance and safety compliance.</p> <p>Validate maintenance quality and technical deliverables.</p> <p>Ensure contractor activities align with company standards and expectations.</p> <p>PEOPLE LEADERSHIP &amp; DEVELOPMENT</p> <p>Provide technical leadership and mentoring to maintenance supervisors, planners, and technicians.</p> <p>Develop team competencies related to crushing and milling equipment.</p> <p>Support skills development and knowledge transfer initiatives.</p> <p>Promote teamwork, accountability, and continuous improvement culture.</p> <p>Support succession planning and capability development programs.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education</b>: </p> <p> Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in a Concentrator Plant/related process plant with similar type of equipment</p> <p> 8+ years of experience in the mining/processing industry or related.</p> <p> Proven track record of successfully managing maintenance in large-scale processing maintenance</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage</p> <p> Six-sigma (BB)</p> <p><br></p>