Radiographer Jobs in Oman

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform operations and maintenance of all mechanical systems and equipment across OTTCO s terminals, including pumps, compressors, valves, pipelines, tanks, and other static and rotating machinery. Ensure all mechanical maintenance and inspection activities are carried out efficiently, safely, and in accordance with approved company procedures, industry standards, and OEM recommendations to achieve maximum equipment reliability and asset integrity.</p><p>The position will operate in alignment with OTTCO s Mission, Vision, Values, and Strategies, ensuring adherence to company policies, HSE regulations, and applicable Omani legal and environmental requirements. The incumbent shall promote operational excellence, continuous improvement, and sustainability through the application of best international practices supported by modern maintenance systems and technologies.</p><p><strong>REPORTING STRUCTURE:</strong> Number of Staff Supervised Direct Reports: 0 Total: 0</p><p><strong>KEY RESPONSIBILITIES:</strong></p><p><strong>Operation &amp; Maintenance</strong></p><ul><li>Perform preventive, corrective, and predictive maintenance of mechanical systems including pumps, compressors, tanks, valves, pipelines, and associated static/rotating equipment.</li><li>Supervise all mechanical maintenance and repair activities to ensure they are conducted safely and in line with approved procedures, work instructions, and OEM standards.</li><li>Lead and support troubleshooting of mechanical faults and equipment breakdowns, ensuring timely restoration and minimal production impact.</li><li>Validate and enter all mechanical maintenance activities into the CMMS (SAP/Maximo or equivalent) and ensure proper record keeping.</li><li>Conduct periodic inspections of mechanical facilities to identify issues, deterioration, or nonconformities requiring intervention.</li><li>Supervise and certify equipment alignment, vibration analysis, balancing, and other critical maintenance activities.</li><li>Coordinate with Operations for equipment isolation, handover, and recommissioning to ensure safe execution of maintenance work.</li><li>Attend Daily operation-maintenance coordination meeting, YTT, and other departmental meetings.</li><li>Participate and support in root cause analysis (RCA) for major equipment failures and implement corrective and preventive actions to avoid recurrence.</li><li>Participate in shutdown/turnaround planning and execution, ensuring all mechanical activities are completed safely, on time, and within budget.</li><li>Closely monitor and verify that all work order closures are completed to a high standard, with clear documentation and all required supporting attachments.</li><li>Monitor, maintain, and continuously improve departmental KPIs by tracking performance metrics, analyzing trends, and implementing corrective actions to ensure alignment with operational targets and company objectives.</li></ul><p><strong>Engineering &amp; Project Interface</strong></p><ul><li>Participate in Engineering, Procurement, Construction, Commissioning, and Operational phases of terminal facilities.</li><li>Review and comment on mechanical engineering deliverables, specifications, and construction drawings to ensure alignment with operational needs.</li><li>Collaborate in multi-disciplinary design reviews to improve reliability, maintainability, and operability of new and existing systems.</li><li>Ensure mechanical designs comply with ASME, API, ASTM, and other relevant international codes.</li><li>Monitor project site activities for progress, quality, and HSE compliance.</li><li>Participate in commissioning, testing, and performance verification of new installations or modifications.</li></ul><p><strong>Team &amp; Contractor Supervision</strong></p><ul><li>Supervise and coordinate work of maintenance technicians, contractors, and third-party service providers performing mechanical works.</li><li>Provide technical guidance, training, and performance feedback to maintenance personnel.</li><li>Develop a skilled and motivated mechanical maintenance workforce capable of meeting operational goals.</li><li>Allocate daily and weekly work assignments, ensuring proper resource utilization and task prioritization.</li><li>Coordinate with contract department and provide necessary documents for contract awarding including scope of work, technical evaluations, etc.</li><li>Manage and allocate manpower across all OTTCO locations to ensure sufficient workforce availability and maintain optimal performance.</li><li>Provide technical guidance and training to subordinates to enhance team competency and performance.</li></ul><p><strong>Budgeting &amp; Resource Control</strong></p><ul><li>Contribute to preparation of the mechanical maintenance budget and ensure compliance with approved cost controls.</li><li>Resourcing of spares, suppliers, and service providers where necessary to enhance and support maintenance activities.</li><li>Identify and manage both critical and non-critical spare parts requirements, monitor inventory levels, and coordinate with the warehouse/procurement to ensure availability.</li><li>Monitor and control maintenance expenditures and support cost optimization initiatives under ETIZAAN and other improvement programs.</li><li>Participate in annual budget reviews and identify opportunities for operational efficiency and reliability improvements.</li></ul><p><strong>Continuous Improvement</strong></p><ul><li>Identify and report deviations in performance, equipment behavior, or process efficiency.</li><li>Develop and implement action plans for maintenance improvement, cost reduction, and reliability enhancement.</li><li>Liaise with OEMs, Engineering, and Maintenance Support teams to resolve recurring mechanical issues.</li><li>Participate in audits, integrity assessments, and reliability improvement initiatives.</li><li>Perform any other duties or special assignments as directed by line management.</li><li>Evaluate contractor performance and ensure compliance with scope of work, safety standards, and contractual requirements.</li><li>Support audits, inspections, and compliance reviews by ensuring mechanical systems meet regulatory and company requirements.</li><li>Coordinate with engineering teams for modifications, upgrades, and new equipment commissioning.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s Degree in Mechanical Engineering or equivalent from a recognized university.</p><p><strong>Experience</strong></p><ul><li>Minimum +6 years of experience in mechanical maintenance within tank terminal, oil &amp; gas, refinery, or petrochemical sectors.</li><li>Demonstrated expertise in rotating equipment, mechanical seals, alignment, piping systems, and static equipment (tanks, pressure vessels, exchangers).</li><li>Proven track record in supervision of EPC and maintenance contractors during shutdowns and major overhauls.</li><li>Strong exposure to mechanical integrity programs, inspection schedules, and reliability analysis.</li><li>Working knowledge of international standards such as API 610/650/682, ASME, ASTM, and ISO.</li></ul><p><strong>Professional Certifications</strong></p><ul><li>Authorized Mechanical/Rotating Equipment Maintenance Certification (where applicable).</li><li>Training in Root Cause Analysis (RCA), Reliability Centered Maintenance (RCM), or Vibration Analysis is preferred.</li><li>HSE or PTW certifications such as NEBOSH/IOSH are desirable.</li><li>Familiarity with SAP or CMMS systems for maintenance management is advantageous.</li></ul><p><strong>Technical Competencies</strong></p><ul><li>Deep knowledge of pumps, compressors, valves, hydraulic systems, HVAC, and pipeline systems.</li><li>Proficient in interpreting P&amp;IDs, isometric drawings, and mechanical schematics.</li><li>Skilled in troubleshooting, root cause analysis, and reliability improvement methodologies.</li><li>Familiarity with corrosion mechanisms, mechanical integrity inspections, and cathodic protection systems.</li><li>Capable of planning, scheduling, and managing shutdown and turnaround activities.</li></ul><p><strong>Behavioral Competencies</strong></p><ul><li>Strong leadership, problem-solving, and decision-making skills.</li><li>Excellent coordination and communication across multidisciplinary teams.</li><li>Proactive and detail-oriented, with a strong sense of accountability and ownership.</li><li>High commitment to HSE culture and continuous improvement.</li><li>Ability to work effectively under pressure and manage multiple priorities.</li><li>Demonstrates integrity, professionalism, and alignment with OTTCO s corporate values and strategic vision.</li></ul><p></p></section>

<p>Are you a passionate Gymnastics Coach looking to advance your career in the Middle East? A leading Sports Academy in Oman is seeking experienced and enthusiastic gymnastics coaches to join its growing coaching team. This is an exciting opportunity to work with one of Oman s premier sports academies, delivering high-quality gymnastics coaching to children and young athletes ranging from complete beginners to competitive gymnasts. The academy also partners with schools across Oman to deliver professional gymnastics programs. If you re committed to developing young athletes in a fun, safe, and inspiring environment, we d love to hear from you.</p><p>Position Gymnastics Coach</p><p>Location Oman</p><p>About the Academy The academy is dedicated to developing gymnastics at every level, from introductory recreational classes to competitive athlete development. Coaches work with children of different ages and abilities while helping to promote gymnastics through school partnerships and community programs.</p><p>Key Responsibilities</p><ul><li>Deliver engaging gymnastics classes for beginners, recreational and competitive gymnasts.</li><li>Plan and implement structured training sessions suitable for different age groups and ability levels.</li><li>Coach artistic gymnastics techniques while promoting correct movement, strength and flexibility.</li><li>Prepare athletes for competitions and performance events.</li><li>Monitor athlete progress and provide regular feedback to students and parents.</li><li>Ensure all sessions are delivered in a safe and positive learning environment.</li><li>Support gymnastics programs delivered in local schools.</li><li>Work collaboratively with the academy s coaching team.</li><li>Maintain high standards of equipment safety and facility presentation.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Previous experience coaching gymnastics.</p><p>Recognised gymnastics coaching qualification.</p><p>Experience coaching children and youth athletes.</p><p>Ability to teach both recreational and competitive gymnastics is highly desirable.</p><p>Strong communication and interpersonal skills.</p><p>Passion for athlete development and long-term progression.</p><p>Current First Aid and Safeguarding certifications are advantageous.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Key Responsibilities</strong></p><p><strong>&nbsp;</strong></p><p><strong>Sales &amp; Business Development</strong></p><ul><li><p>Develop and execute sales strategies to achieve monthly, quarterly, and annual targets.</p></li><li><p>Drive growth in vehicle sales, accessories, and related services.</p></li><li><p>Identify business opportunities within the Oman market and establish relationships with corporate and retail customers.</p></li><li><p>Monitor sales activities and market trends to maximize business opportunities.</p></li><li><p>Conduct competitor analysis and recommend business improvement initiatives.</p></li></ul><p><strong>Branch Operations Management</strong></p><ul><li><p>Oversee daily branch operations to ensure smooth and efficient functioning.</p></li><li><p>Manage inventory levels for vehicles, spare parts, and accessories.</p></li><li><p>Monitor branch expenditures and optimize operational costs.</p></li><li><p>Ensure compliance with company procedures and local business regulations in Oman.</p></li></ul><p><strong>Team Management</strong></p><ul><li><p>Lead and supervise sales executives, service advisors, technicians, and administrative staff.</p></li><li><p>Recruit, train, coach, and develop employees to improve performance.</p></li><li><p>Conduct regular performance reviews and implement development plans.</p></li><li><p>Maintain a high-performance and customer-focused work environment.</p></li></ul><p><strong>Customer Relationship Management</strong></p><ul><li><p>Ensure excellent customer service standards and customer satisfaction.</p></li><li><p>Handle customer complaints and resolve escalated issues professionally.</p></li><li><p>Build long-term customer relationships to encourage repeat business and referrals.</p></li></ul><p><strong>Financial &amp; Reporting Responsibilities</strong></p><ul><li><p>Monitor branch profitability and financial performance.</p></li><li><p>Prepare budgets, forecasts, and branch reports.</p></li><li><p>Ensure effective collection processes and financial control measures.</p></li><li><p>Submit periodic performance reports to senior management.</p></li></ul><p><strong>Compliance &amp; Administration</strong></p><ul><li><p>Ensure compliance with Oman labor laws, company policies, and safety standards.</p></li><li><p>Maintain accurate branch documentation and records.</p></li></ul><p>Monitor adherence to quality standards and audit requirements.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Graduate required; MBA or equivalent preferred</p><br><br><ul><li><p>Minimum 5–10 years of experience in the automobile industry with at least 3 years in a managerial role.</p></li></ul><br><p>a)&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ERP system proficiency (e.g., SAP, Oracle, Microsoft Dynamics)</p><br><p>GCC/Oman automobile industry experience preferred.</p><p>English (Essential) , &nbsp;local language (desirable)</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>ABOUT THE JOB</p><br><p>The Omnichannel Architecture Governance community is regrouping architects from all our Tech Divisions, Regions and Functions to trigger, support or help accelerate initiatives and projects by providing architects with a cohesive set of principles, tools, strategies and a network of excellence.</p><br><p>CHANEL's Information Systems Department has completed a key milestone in its transformation by migrating its Enterprise Architecture repository to LeanIX.</p><br><p>After initial deployment, we are now entering a phase to broaden its usage and bring additional use cases. In our current organization, we are looking for a leader capable to drive the development of this inventory into a true strategic steering cockpit for the Group.</p><br><p>Within Chanel’s Global IT organisation, you will play a pivotal role in shaping how the Maison understands, governs, and evolves its technology landscape. As the Architecture Referential Product Owner, you will be the driving force behind our Enterprise Architecture Management (EAM) platform, ensuring it becomes a trusted source of truth for IT and business stakeholders across the globe.</p><br><p>You will sit at the crossroads of technology strategy, data governance, and cross-functional collaboration. You will interact daily with Enterprise Architects, IT domain leaders, application owners across regions, divisions and functions. You will have direct visibility into how Chanel plans, rationalises, and transforms its application portfolio to support its long-term ambitions.</p><br><p>You will help shape architectural decisions that touch every corner of the House — from boutique operations and client engagement to supply chain and corporate functions. If you are passionate about turning complex IT landscapes into clear, actionable insights, this role is for you.</p><br><p>WHAT IMPACT YOU CREATE AT CHANEL</p><br><ul><li><p><b>Own and steer the Architecture Referential (LeanIX) platform roadmap</b>: You contribute to define the vision, prioritize enhancements, and ensure the platform evolves in line with Chanel’s IT strategy. Your guidance directly influence how the organisation visualises and manages its technology portfolio.</p><br></li><li><p><b>Drive data quality and completeness</b>: You establish governance standards and engage with application owners and IT teams worldwide to ensure the information within LeanIX is accurate, up-to-date, and meaningful. High-quality data means better decision-making at every level.</p><br></li><li><p><b>Enable strategic IT portfolio decisions</b>: By delivering clear dashboards, reports, and analyses, you empower leadership to identify redundancies, assess technology risks, plan modernisation roadmaps, and allocate investment where it matters most.</p><br></li><li><p><b>Champion adoption and engagement</b>: You design and lead training sessions, communication campaigns, and community rituals that make LeanIX a living tool — not just a repository — used actively by hundreds of contributors across the organisation.</p><br></li><li><p><b>Connect the dots across the ecosystem</b>: You ensure LeanIX integrates seamlessly with adjacent tools and processes (CMDB, project portfolio management, cloud inventories), creating a coherent and connected view of Chanel’s IT landscape.</p><br></li></ul><p>What makes this role unique is the combination of product ownership rigour with enterprise-wide architectural impact, all within a Maison that values craft, excellence, and long-term thinking.</p><br><p>YOU ARE ENERGISED BY</p><br><ul><li><p>Bringing structure and clarity to complex, multi-layered technology environments — you find satisfaction in making the invisible visible.</p><br></li><li><p>Engaging with a diverse, global community of stakeholders — from architects and developers to C-level leaders — and building trusted relationships across cultures and time zones.</p><br></li><li><p>Operating in an environment where craftsmanship and attention to detail are valued as much in IT as they are in the products Chanel creates.</p><br></li><li><p>Navigating ambiguity with confidence — this is a role where you will need to shape processes and define best practices, not just follow them.</p><br></li><li><p>Continuous learning and staying at the forefront of Enterprise Architecture Management trends, tools, and methodologies.</p><br></li></ul><p>WHAT YOU WILL BRING</p><br><ul><li><p><b>Experience</b>: 5+ years of hands-on experience with LeanIX or a comparable Enterprise Architecture Management platform (e.g., Ardoq, Mega). Proven experience acting as a Product Owner or functional lead for an enterprise-scale platform.</p><br></li><li><p><b>Technical acumen</b>: A solid understanding of enterprise architecture frameworks (TOGAF, ArchiMate), IT portfolio management concepts, and application lifecycle management. Familiarity with integration patterns (APIs, data feeds) and adjacent IT management tools.</p><br></li><li><p><b>Stakeholder engagement</b>: A natural ability to collaborate with and influence senior stakeholders across IT functions. You are comfortable presenting to leadership and equally comfortable coaching individual contributors on data entry best practices.</p><br></li><li><p><b>Analytical mindset</b>: Strong skills in data analysis, reporting, and visualisation. You know how to turn raw data into compelling stories that drive action.</p><br></li><li><p><b>Communication</b>: Excellent written and verbal communication skills in English; French is a plus. You can adapt your message to your audience, whether it is a boardroom presentation or a hands-on workshop.</p><br></li><li><p><b>Rigour and autonomy</b>: You are structured, detail-oriented, and capable of managing multiple priorities in a fast-paced, global environment. You take ownership and deliver without needing to be closely supervised.</p><br></li><li><p><b>Mindset</b>: A genuine curiosity for how technology can serve a luxury Maison’s unique business model, and the humility to listen, learn, and adapt.</p><br></li></ul><p>WHAT CHANEL CAN OFFER YOU</p><br><ul><li><p><b>Enterprise-wide exposure</b>: You will gain a panoramic understanding of Chanel’s global IT landscape, business processes, and strategic priorities — a rare vantage point that accelerates your professional growth.</p><br></li><li><p><b>Leadership development</b>: By owning a platform with global reach, you will sharpen your skills in stakeholder management, influence without authority, and strategic communication.</p><br></li><li><p><b>Technical depth</b>: You will deepen your expertise in Enterprise Architecture Management, data governance, and IT portfolio optimisation — competencies that are increasingly valued across the industry.</p><br></li><li><p><b>A path forward</b>: This role can open doors to broader positions in IT strategy, enterprise architecture leadership, or digital transformation programme management within Chanel’s global organisation.</p><br></li><li><p><b>A distinctive culture</b>: At Chanel, you will experience a working environment where long-term vision takes precedence over short-term pressure, where excellence is expected and individuality is celebrated.</p><br></li></ul><p><i>At Chanel, we are focused on creating an inclusive culture that nurtures personal growth, contributing to collective progress. We believe the uniqueness of each individual increases the diversity, complementarity and effectiveness of our teams. We strongly encourage your application, as we value the perspective, experience and potential you could bring to Chanel.</i></p><br> </div>

<p>The Production Facility Electrical Engineer is responsible for ensuring the safe, reliable, and efficient operation of electrical systems supporting production facilities. The role provides technical expertise in electrical equipment reliability, maintenance optimization, troubleshooting, asset integrity, and continuous improvement while ensuring compliance with company standards and regulatory requirements.</p><p>Key Responsibilities:</p><ul><li>Provide technical leadership and engineering support for electrical systems across production facilities.</li><li>Ensure the safe and reliable operation of HV, MV, and LV electrical distribution systems, including switchgear, transformers, MCCs, motors, UPS systems, battery chargers, and emergency power generation systems.</li><li>Develop and implement preventive and predictive maintenance strategies to improve equipment reliability and plant availability.</li><li>Lead electrical troubleshooting and root cause failure analysis (RCFA) for critical equipment failures and recurring issues.</li><li>Monitor equipment performance and identify opportunities for reliability improvement, risk reduction, and maintenance optimization.</li><li>Support facility start-up, commissioning, shutdown, turnaround, and expansion projects.</li><li>Review, update, and maintain electrical engineering drawings, single-line diagrams, protection coordination studies, and technical documentation.</li><li>Ensure compliance with company electrical safety standards, electrical safe work practices, and applicable regulatory requirements.</li><li>Provide technical guidance for electrical isolations, Lockout/Tagout (LOTO), and Permit to Work (PTW) activities.</li><li>Define and review maintenance procedures, inspection plans, and operating instructions for electrical equipment.</li><li>Evaluate equipment condition through inspections, testing programs, and condition monitoring activities.</li><li>Support capital projects, equipment upgrades, and facility modifications by providing engineering design reviews and technical recommendations.</li><li>Collaborate with multidisciplinary teams to improve facility performance, energy efficiency, operational excellence, and asset utilization.</li><li>Manage electrical contractors and vendors to ensure work is executed safely and in accordance with company standards.</li><li>Ensure accurate maintenance records, equipment history, and reliability data are maintained within the CMMS.</li><li>Provide mentorship and technical support to maintenance personnel and junior engineers.</li><li>Drive continuous improvement initiatives focused on safety, reliability, productivity, and cost optimization.</li></ul><p>Technical Competencies</p><ul><li>Strong knowledge of industrial power generation, transmission, and distribution systems.</li><li>Knowledge of HV, MV, and LV electrical equipment and protection systems.</li><li>Experience with motors, VFDs, switchgear, transformers, UPS systems, generators, and control systems.</li><li>Understanding of power system studies, protection coordination, and electrical fault analysis.</li><li>Knowledge of reliability engineering principles and maintenance best practices.</li><li>Ability to interpret electrical schematics, wiring diagrams, and engineering drawings.</li><li>Familiarity with electrical testing, commissioning, and condition monitoring techniques.</li><li>Knowledge of CMMS and maintenance management processes.</li><li>Strong analytical, problem-solving, and troubleshooting skills.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electrical Engineering.</li><li>Minimum 3-8 years of experience in industrial facilities, manufacturing, energy, oil and gas, or production environments.</li><li>Experience supporting critical electrical infrastructure in an operational environment.</li><li>Working knowledge of electrical safety regulations, standards, and industry best practices.</li><li>Demonstrated experience in reliability improvement, maintenance engineering, and troubleshooting of electrical systems.</li><li>ESR certified and capable of obtaining electrical authorization in accordance with company requirements.</li><li>Strong communication, teamwork, and stakeholder management skills.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To lead and execute internal audit engagements, evaluate the effectiveness of governance, risk management, and internal control systems, and provide independent assurance and value-added recommendations to management. The Lead Internal Auditor is also responsible for coaching, training, and developing subordinate auditors to enhance the overall capability and effectiveness of the Internal Audit function.</p><p><strong>KEY ACCOUNTABILITIES:</strong></p><p><strong>Audit Planning and Execution</strong></p><ul><li>Lead and manage assigned internal audit engagements from planning through reporting and follow-up.</li><li>Develop risk-based audit programs and testing procedures.</li><li>Evaluate the adequacy and effectiveness of internal controls, governance processes, and risk management practices.</li><li>Conduct financial, operational, compliance, and special audits.</li><li>Review and assess compliance with company policies, procedures, laws, regulations, and industry standards.</li><li>Identify control weaknesses, inefficiencies, and opportunities for process improvement.</li><li>Conduct root cause analysis and develop practical recommendations.</li><li>Coordinate audit activities with management and auditees.</li></ul><p><strong>Audit Reporting</strong></p><ul><li>Review audit findings and supporting working papers.</li><li>Prepare clear, concise, and professional audit reports.</li><li>Present audit findings and recommendations to management.</li><li>Monitor implementation of corrective actions and agreed action plans.</li><li>Maintain accurate audit documentation in accordance with Internal Audit standards.</li></ul><p><strong>Risk Management and Governance</strong></p><ul><li>Support the annual risk assessment process.</li><li>Assist in the development of the annual internal audit plan.</li><li>Identify emerging risks and communicate them to the Head of Internal Audit.</li><li>Participate in fraud risk assessments and special investigations when required.</li><li>Evaluate compliance with governance frameworks and regulatory requirements.</li></ul><p><strong>Team Leadership and Development</strong></p><ul><li>Supervise, guide, and support Internal Auditors and Junior Internal Auditors during audit assignments.</li><li>Allocate audit assignments and monitor work progress.</li><li>Review the quality and completeness of audit working papers prepared by team members.</li><li>Provide technical guidance and coaching on audit methodologies, risk assessment, control evaluation, and report writing.</li><li>Conduct on-the-job training for subordinate auditors.</li><li>Develop individual training and development plans for team members.</li><li>Identify competency gaps and recommend appropriate training programs.</li><li>Mentor and support employees pursuing professional certifications such as CIA, ACCA, CPA, CFE, or CMA.</li><li>Conduct periodic performance reviews and provide constructive feedback.</li><li>Promote knowledge sharing and continuous professional development within the Internal Audit team.</li></ul><p><strong>Continuous Improvement</strong></p><ul><li>Contribute to the enhancement of audit methodologies, templates, and procedures.</li><li>Support the implementation of audit management systems and data analytics tools.</li><li>Promote best practices in internal auditing and risk management.</li><li>Participate in quality assurance and improvement programs.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>QUALIFICATIONS, EXPERIENCE &amp; SKILLS:</h2><p><strong>Qualifications</strong></p><ul><li>Bachelor's Degree in Accounting, Finance, Auditing, Business Administration, or related field.</li></ul><p><strong>Experience</strong></p><ul><li>Minimum 10 years of experience in Internal Audit, External Audit, Risk Management, or related functions.</li><li>At least 3 years in a supervisory or team leadership role.</li></ul><p><strong>Technical Competencies</strong></p><ul><li>Leadership</li><li>Internal Auditing Standards (IIA Standards)</li><li>Risk Assessment and Internal Controls</li><li>Financial Statement Analysis</li><li>Audit Planning and Execution</li><li>Fraud Risk Management</li><li>Compliance Auditing</li><li>Root Cause Analysis</li><li>Audit Report Writing</li><li>Data Analytics and Audit Tools</li><li>ERP Systems and Financial Controls</li><li>Governance and Risk Management Frameworks</li></ul><p><strong>Behavioural Competencies</strong></p><ul><li>Leadership</li><li>Coaching and Mentoring</li><li>Communication Skills</li><li>Analytical Thinking</li><li>Problem Solving</li><li>Professional Skepticism</li><li>Teamwork and Collaboration</li><li>Integrity and Ethics</li><li>Time Management</li><li>Stakeholder Management</li><li>Continuous Learning and Development</li></ul><p></p></section>

<p>Supervise the execution of the safe &amp; efficient well drilling activities during assigned shift for the development, appraisal and exploration wells, and support the drilling engineers for any operational challenges/trainings and any other technical support. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><br></p><p><br></p><p><strong>Main tasks and responsibilities</strong></p><p><strong>HSE Roles &amp; Responsibilities:</strong></p><ul><li>Provide technical input during any HSE Emergency incident or Well control event arising from Well Engineering activities.</li><li>Responsible for the implementation of Well Delivery HSSE annual plan and ensure all units under Well Delivery operate 'at all time' in compliance with OQ HSSE requirements.</li><li>Assist in the close-out HSE actions resulting from Audit or incident investigations.</li><li>Actively contribute to all high potential HSE incidents investigations including participation in the investigation team while ensuring OQ investigation process is followed and all required reports completed on time.</li><li>When required, act as Well Delivery representative as per the Emergency Response Plan.</li><li>Ensure to Work safely and think proactively about personal safety and safety of others at work</li><li>Actively participate in, contribute to, and promote company occupational health, safety, security and environment culture.</li><li>Ensure work is carried out in accordance with the Company HSE and Security policies and procedures and meet company HSE goals and targets, and participate in HSE programs.</li></ul><p><strong>Operations Roles &amp; Responsibilities::</strong></p><ul><li>Execute the assigned work instructions for drilling and service in all aspects of daily drilling and completion activities including (but not limited to); drilling operations, casing operations, cementing operations, well integrity assurance, petrophysical data acquisition, geological data acquisition, fluid systems management, remedial operations and completion operations to ensure compliance with OQ programs.</li><li>In doing so, the roles may include but are not limited to: <ul><li>Selection of tools for bottom hole assemblies to identify an optimum configuration that optimizes performance of the tools string and job objective;</li><li>Monitor operation of equipment controls to ensure pipe movement in and/or out of the well does not compromise well control</li><li>Strong understanding of down-hole conditions: such as Problems associated with the drilling, due to the disturbances of earth stresses around the borehole, caused by the creation of the hole itself and by drilling mud/formation interaction). Open/sable hole by maintaining a balance between earth stresses and pore pressure on one side and well bore mud pressure and chemical composition on the other side (pressure and temperature reduce constantly, and the solubility of elemental sulfur in natural gas decreases continuously)</li><li>Perform field calculations to cementation jobs.</li><li>Supervise all rig up and rig downs on location including unit transit between locations to ensure HSE is not compromised.</li><li>Execute the assigned Drilling task for the Unit(s) and ensure are tested, maintained and operated within their envelope and as per OQ/OEM requirements.</li><li>Provide a detailed post-well operational performance review report.</li><li>Liaise with Senior Drilling Engineer on requirements for operation optimization or remedial work and formulates revised work instructions in accordance with OQ change management requirements.</li></ul></li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Development/Exploration Departments / Central Operations and Facilities Departments / Supply Chain Management Department.</li><li>External: Contractors &amp; Service Providers</li></ul><p><strong>Notable Working Conditions.</strong></p><p>Field Operational environment, computer screen use. (Shift)</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><p>Degree in Petroleum engineering or related.</p><p><strong>Language requirements :</strong></p><p>Excellent knowledge of written, read, and spoken English (required)</p><p>Arabic - Native (desirable)</p><p><strong>Background and experience</strong></p><p>+10 years of relevant experience</p><p>Well-rounded professional with strong background in petroleum engineering or G&amp;G, adaptable and motivated general management strategist who relishes challenges.</p><p><strong>Competencies and skills:</strong></p><p><strong>Soft:</strong> Strong management &amp; leadership skills &amp; should be able to work collaboratively with all involved. Excellent interpersonal skills and multi-cultural sensitivity.</p><p><strong>Technical:</strong> Computer literate with expertise in MS Office. Hands on experience at managerial level in Oil &amp; Gas subsurface field Experienced in resource control, contract management and general management.</p>

<p>Supervise the execution of the safe &amp; efficient well drilling activities during assigned shift for the development, appraisal and exploration wells, and support the drilling engineers for any operational challenges/trainings and any other technical support.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><p><strong>HSE Roles &amp; Responsibilities:</strong></p><ul><li>Provide technical input during any HSE Emergency incident or Well control event arising from Well Engineering activities.</li><li>Responsible for the implementation of Well Delivery HSSE annual plan and ensure all units under Well Delivery operate 'at all time' in compliance with OQ HSSE requirements.</li><li>Assist in the close-out HSE actions resulting from Audit or incident investigations.</li><li>Actively contribute to all high potential HSE incidents investigations including participation in the investigation team while ensuring OQ investigation process is followed and all required reports completed on time.</li><li>When required, act as Well Delivery representative as per the Emergency Response Plan.</li><li>Ensure to Work safely and think proactively about personal safety and safety of others at work</li><li>Actively participate in, contribute to, and promote company occupational health, safety, security and environment culture.</li><li>Ensure work is carried out in accordance with the Company HSE and Security policies and procedures and meet company HSE goals and targets, and participate in HSE programs.</li></ul><p><strong>Operations Roles &amp; Responsibilities:</strong></p><ul><li>Execute the assigned work instructions for drilling and service in all aspects of daily drilling and completion activities including (but not limited to); drilling operations, casing operations, cementing operations, well integrity assurance, petrophysical data acquisition, geological data acquisition, fluid systems management, remedial operations and completion operations to ensure compliance with OQ programs. In doing so, the roles may include but are not limited to:</li><li>Select ion of tools for bottom hole assemblies to identify an optimum configuration that optimizes performance of the tools string and job objective;</li><li>Monitor operation of equipment controls to ensure pipe movement in and/or out of the well does not compromise well control</li><li>Strong understanding of down-hole conditions: such as</li><li>Problems associated with the drilling, due to the disturbances of earth stresses around the borehole, caused by the creation of the hole itself and by drilling mud/formation interaction).</li><li>Open/sable hole by maintaining a balance between earth stresses and pore pressure on one side and well bore mud pressure and chemical composition on the other side (pressure and temperature reduce constantly, and the solubility of elemental sulfur in natural gas decreases continuously)</li><li>Perform field calculations to cementation jobs.</li><li>Supervise all rig up and rig downs on location including unit transit between locations to ensure HSE is not compromised.</li><li>Execute the assigned Drilling task for the Unit(s) and ensure are tested, maintained and operated within their envelope and as per OQ/OEM requirements.</li><li>Provide a detailed post-well operational performance review report.</li><li>Liaise with Senior Drilling Engineer on requirements for operation optimization or remedial work and formulates revised work instructions in accordance with OQ change management requirements.</li></ul><p><strong>Key interactions</strong></p><p>Internal: Development/Exploration Departments / Central Operations and Facilities Departments / Supply Chain Management Department.</p><p>External: Contractors &amp; Service Providers</p><p><strong>Notable Working Conditions.</strong> Field Operational environment, computer screen use. (Shift)</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Petroleum engineering or related.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Arabic - Native (desirable)</li><li>+10 years of relevant experience</li><li>Well-rounded professional with strong background in petroleum engineering or G&amp;G, adaptable and motivated general management strategist who relishes challenges.</li><li><strong>Soft:</strong></li><li>Strong management &amp; leadership skills &amp; should be able to work collaboratively with all involved.</li><li>Excellent interpersonal skills and multi-cultural sensitivity.</li><li><strong>Technical:</strong></li><li>Computer literate with expertise in MS Office.</li><li>Hands on experience at managerial level in Oil &amp; Gas subsurface field</li><li>Experienced in resource control, contract management and general management.</li></ul>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a client to source a PCC HVAC superintendent. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>July 1, 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning execution</strong></p> <ul> <li>Lead and supervise all HVAC pre commissioning and commissioning activities on site</li> <li>Review and validate HVAC commissioning procedures, method statements, and test packs</li> <li>Ensure readiness of HVAC systems for commissioning, including completion of mechanical checks, punch lists, and system cleanliness</li> <li>Coordinate functional testing, performance testing, and system balancing activities</li> <li>Oversee start up, testing, and troubleshooting of HVAC equipment and systems</li> </ul> <p><strong>Technical scope</strong></p> <ul> <li>HVAC systems including: <ul> <li>Chilled water systems</li> <li>DX and packaged units</li> <li>Air handling units (AHUs)</li> <li>Ventilation and exhaust systems</li> <li>Pressurization systems</li> <li>Ducting, dampers, controls, and instrumentation</li> </ul> </li> <li>Ensure HVAC systems meet design intent, operational requirements, and applicable international standards (ASHRAE, SMACNA, NFPA, etc.)</li> <li>Interface with vendors and OEM representatives during testing and commissioning activities</li> </ul> <p><strong>Interface & coordination</strong></p> <ul> <li>Coordinate with construction, QA/QC, electrical, instrumentation, and commissioning teams</li> <li>Liaise with engineering to resolve technical queries, NCRs, and site issues</li> <li>Support system walkdowns, punch clearing, and handover to operations/client teams</li> <li>Participate in commissioning meetings, progress reviews, and readiness assessments</li> </ul> <p><strong>HSE & quality</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE plans and procedures</li> <li>Promote safe working practices and participate in toolbox talks and risk assessments</li> <li>Ensure commissioning documentation is completed accurately and in a timely manner</li> <li>Support audits, inspections, and compliance reviews as required</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Monitor and report commissioning progress against schedule</li> <li>Prepare daily / weekly activity reports</li> <li>Ensure commissioning dossiers and handover documentation are completed and approved</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree or diploma in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10–15 years of experience in HVAC systems within oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Proven experience in pre commissioning and commissioning phases on major EPC projects</li> <li>Prior experience working on LNG facilities or complex energy infrastructure projects is highly desirable</li> <li>Strong site based commissioning background in multidisciplinary environments</li> </ul> <p><strong>Technical competence</strong></p> <ul> <li>In depth knowledge of HVAC system design, installation, and commissioning</li> <li>Familiarity with international codes and standards (ASHRAE, SMACNA, NFPA, ISO, etc.)</li> <li>Ability to read and interpret P&IDs, layouts, datasheets, and commissioning procedures</li> <li>Strong troubleshooting and problem solving skills during system start up</li> </ul> <p><strong>Soft skills & attributes</strong></p> <ul> <li>Strong leadership and team coordination skills</li> <li>Effective communication with multicultural teams and stakeholders</li> <li>Proactive, organized, and able to work under schedule pressure</li> <li>Safety driven mindset with strong attention to quality and detail</li> </ul> <p>If you would like to be considered for the position, please apply directly to this advertisement with your CV.</p> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Deliver pipeline engineering design across Project Delivery under the Mechanical Engineering Manager, covering Concept, Pre-FEED, FEED, Detailed Design, and EPC phases for cross-country and in-plant pipeline systems. The role ensures safe, optimized, and fit-for-purpose designs in full compliance with OQEP standards, asset requirements, and international codes.</p><p>Act as the technical authority for pipeline engineering, ensuring technical integrity of all deliverables and providing expert input to key design decisions across the project lifecycle. The position supports complex pipeline systems, including large-diameter and long-distance networks and interfaces closely with Field Urban planning, Projects, procurement, construction, commissioning, operation and integrity teams to ensure design intent is maintained through to project closeout.</p><p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><ul><li>Execute pipeline engineering design across Concept, Pre-FEED, FEED, Detailed Design, and EPC phases, ensuring alignment with project scope, schedule, and technical requirements.</li><li>Lead and coordinate pipeline engineering activities, ensuring timely and high-quality delivery of all design outputs.</li><li>Act as technical authority in pipeline engineering, providing guidance on design decisions, standards application, and resolving complex technical issues.</li><li>Ensure the engineering deliverables generated by Contractor meet project requirement in term of technical content and follow project procedures such as engineering plan, quality plan, document numbering, level of approval,</li><li>Develop and review key deliverables including pipeline layouts, plot plans, GA drawings, alignment sheets, isometrics, hydrotest diagrams, HDD profiles, crossing drawings, and station approach drawings.</li><li>Prepare and review Pipeline Design Basis, Stress Analysis Philosophy, stress analysis report, route selection reports and all related design calculations including wall thickness, Road crossing and upheaval buckling calculations.</li><li>Perform and review pipeline routing, alignment optimization, and feasibility studies including constructability and cost considerations.</li><li>Ensure compliance with Company design specifications, international design codes and standards including ASME B31.4, B31.8, B31.3, API, ISO, ASTM standards, and other applicable codes.</li><li>Design and review pipelines across various materials including Carbon Steel (CS), DSS, GRE, HDPE, PE-lined systems, and LLRTP.</li><li>Prepare material specifications, datasheets, RFQs, and support technical bid evaluations (TBE) and vendor document reviews (VDR) for all pipeline and piping items</li><li>Review and Develop construction specifications, scope of work for pipeline Engineering, route surveys, and interfaces</li><li>Coordinate with vendors, and multidisciplinary teams to ensure design compliance and alignment with project requirements.</li><li>Analyze pipeline engineering deliverables and actively participate in design reviews, HAZOPs, and technical workshops.</li><li>Identify and resolve technical challenges during FEED and detailed design, including urban planning studies and system modifications/upgrades.</li><li>Support end-to-end project execution including design engineering, resource planning, cost estimation, and activity Phasing.</li><li>Support urban planning, projects, procurement, construction, commissioning, operation and intergrity teams by providing technical clarifications and resolving site queries.</li><li>Conduct or support site visits, inspections, and mechanical walk-downs to ensure design accuracy and implementation compliance.</li><li>Identify gaps in standards, tools, and practices, and contribute to continuous improvement initiatives.</li><li>Ensure adherence to QHSE requirements and promote a strong safety culture across all engineering activities.</li><li>Report safety concerns or deviations and ensure compliance with company procedures.</li><li>Mentor and develop junior pipeline engineers by providing technical guidance, reviewing their work, and supporting their progression in design practices, standards, and tools.</li><li>Perform other related duties as required.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Projects, Operation, Integrity</li><li>External: Consultants, Contractors, Vendors</li></ul><p><strong>Notable Working Conditions.</strong> office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>The minimum qualification is a Bachelor s degree in Mechanical Engineering, or related.</p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p>Lead Engineer Bachelor 8+ years of relevant experience</p><p>Both:</p><p>Pipeline experience in similar projects is mandatory.</p><p>Pipeline offshore experience is favorable.</p><p>On plot piping experience is favorable.</p><p>Soft:</p><p>To work collaboratively with all involved.</p><p>Adaptable and motivated general management strategist who relishes challenges</p><p>Excellent interpersonal skills and multi-cultural sensitivity.</p><p>Technical:</p><p>Computer literate with expertise in MS Office.</p><p>Experienced in resource control, contract management and general management.</p><p>AutoCad, Naviswork</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description<br><p>Must have Skills : Pre-sales support, Business Solutioning (Expert), Solution-oriented (Strong), Customer orientation (Expert), Value proposition creation</p><br><p>Job Description:</p><br><p>Years of Experience 12+ Years The Pre-Sales Consultant partners with sales, delivery, and solution teams to shape customer-centric solutions, respond to RFPs/RFIs, and support deal closures through strong technical, functional, and commercial alignment. Key Responsibilities: - Work closely with sales teams to understand customer requirements and define solution approaches. - Lead or support RFP/RFI responses, including solution design, effort estimation, and proposal documentation. - Develop solution architectures, demos, PoCs, and presentations aligned with customer needs. - Collaborate with delivery, architecture, and product teams to ensure feasibility and scalability of proposed solutions. - Support pricing, costing, and commercial models in coordination with finance and leadership. - Participate in client workshops, technical discussions, and solution presentations. - Maintain reusable assets such as proposal templates, case studies, and solution accelerators. - Stay current with industry trends, technologies, and competitive offerings.</p><br><p>Skills &amp; Experience: - Strong understanding of enterprise IT solutions, digital platforms, and system integration. - Experience in consulting, pre-sales, or solutioning roles within SI / ICT organizations. - Excellent communication, stakeholder management, and presentation skills. - Ability to translate business requirements into technical and functional solutions.</p><br><p>Qualifications - Bachelor's degree in Engineering, Computer Science, Information Technology, or a related field. - MBA is an added advantage Success Metrics (KPIs) - Number of RFP/RFI responses supported and submitted per quarter. - Bid win rate and contribution to revenue pipeline. - Quality and completeness of solution proposals (as measured by internal and client feedback). - Turnaround time for proposal and solution preparation. - Number of client workshops, demos, and PoCs supported. - Reuse and creation of proposal assets, accelerators, and case studies. - Collaboration effectiveness with sales and delivery teams.</p><br><br><br> </div>

<p>We are looking for an experienced <strong>Commercial Kitchen Equipment Sales Manager</strong> with a strong <strong>engineering/technical background</strong> and proven Oman market experience.</p><p>The candidate must have strong expertise in <strong>commercial kitchen equipment sales, supply, installation, and project execution</strong>.<br></p><p><strong>Key Responsibilities</strong></p><ul><li><p>Generate <strong>qualified leads</strong> and actively<strong> develop new business.</strong></p></li><li><p>Convert <strong>enquiries into confirmed projects</strong> and <strong>achieve sales targets.</strong></p></li><li><p>Build relationships with hotels, restaurants, cafés, catering companies, consultants, contractors, and F&B groups.</p></li><li><p>Understand kitchen layouts, equipment specifications, BOQs, and MEP requirements.</p></li><li><p>Prepare <strong>technical and commercial quotations</strong> and negotiate with clients.</p></li><li><p>Manage projects from <strong>sales confirmation to supply, installation, testing, and handover</strong>.</p></li><li><p>Coordinate and manage sales, technical, procurement, and installation teams.</p></li><li><p>Maintain strong client relationships and generate repeat business.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>4-5+ years of proven experience in commercial kitchen equipment sales</strong>, preferably in <strong>Oman or the GCC</strong>.</p></li><li><p>Strong <strong>engineering/technical background</strong> with expertise in commercial kitchen equipment, supply, installation, and project execution.</p></li><li><p>Proven ability to <strong>generate leads, develop new business, negotiate, and close projects</strong>.</p></li><li><p>Strong network within <strong>hotels, restaurants, cafés, catering companies, consultants, contractors, developers, and F&B groups in Oman</strong> is highly preferred.</p></li><li><p>Good understanding of <strong>kitchen layouts, BOQs, equipment specifications, MEP requirements, refrigeration, ventilation, and stainless-steel fabrication</strong>.</p></li><li><p>Capable of managing projects from <strong>enquiry and quotation through supply, installation, testing, and handover</strong>.</p></li><li><p>Strong client management, negotiation, and team leadership skills.</p></li><li><p>Target-driven and capable of taking full ownership of <strong>sales and project delivery</strong>.</p></li><li><p><strong>Valid Oman driving licence preferred.</strong><br><br><strong>We need someone who can bring business, close projects, and take complete ownership from enquiry to final handover. Location: Sohar, Oman Employment: Full-Time Salary: Competitive + Sales Incentives</strong></p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br>Under direct supervision, trains and becomes familiar with the chemical hygiene plan and the current HSE laboratory safety standards. Follows prescribed safety rules and regulations in performing assigned duties. Performs duties to conduct prototype or laboratory tests following prescribed procedures. Learns to build equipment and/or perform basic material or environmental tests using basic techniques with electrical/electronic, chemical, and mechanical equipment. Learns to document test data for reporting purposes. Maintains files and documentation related to test equipment and test results of equipment. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Skills typically through eight (8) hours of college chemistry (preferred).<br><br><b>Qualifications</b> <br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Str 2316, Bdg 65, Assarain Bdg,&nbsp;Muscat,&nbsp;Muscat,&nbsp;, Oman</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210945&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Entry-Level&nbsp;<br><strong>Job Family:</strong>&nbsp;Engineering/Science/Technology&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Baroid&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Prepare special meals or substitute items. Regulate temperature of ovens, broilers, grills, and roasters. Pull food from freezer storage to thaw in the refrigerator. Ensure proper portion, arrangement, and food garnish. Maintain food logs. Monitor the quality and quantity of food that is prepared. Communicate assistance needed during busy periods. Inform Chef of excess food items for use in daily specials. Inform Food &amp; Beverage service staff of menu specials and out of stock menu items. Ensure the quality of the food items. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods. Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; serve as a role model. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards. Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>PREFERRED QUALIFICATION Education: Technical, Trade, or Vocational School Degree. Related Work Experience: At least 3 years of related work experience. Supervisory Experience: No supervisory experience. License or Certification: None</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description<br><p>Must have Skills : Pre-sales support, Business Solutioning (Expert), Solution-oriented (Strong), Customer orientation (Expert), Value proposition creation</p><br><p>Job Description:</p><br><p>Years of Experience 12+ Years The Pre-Sales Consultant partners with sales, delivery, and solution teams to shape customer-centric solutions, respond to RFPs/RFIs, and support deal closures through strong technical, functional, and commercial alignment. Key Responsibilities: - Work closely with sales teams to understand customer requirements and define solution approaches. - Lead or support RFP/RFI responses, including solution design, effort estimation, and proposal documentation. - Develop solution architectures, demos, PoCs, and presentations aligned with customer needs. - Collaborate with delivery, architecture, and product teams to ensure feasibility and scalability of proposed solutions. - Support pricing, costing, and commercial models in coordination with finance and leadership. - Participate in client workshops, technical discussions, and solution presentations. - Maintain reusable assets such as proposal templates, case studies, and solution accelerators. - Stay current with industry trends, technologies, and competitive offerings.</p><br><p>Skills &amp; Experience: - Strong understanding of enterprise IT solutions, digital platforms, and system integration. - Experience in consulting, pre-sales, or solutioning roles within SI / ICT organizations. - Excellent communication, stakeholder management, and presentation skills. - Ability to translate business requirements into technical and functional solutions.</p><br><p>Qualifications - Bachelor's degree in Engineering, Computer Science, Information Technology, or a related field. - MBA is an added advantage Success Metrics (KPIs) - Number of RFP/RFI responses supported and submitted per quarter. - Bid win rate and contribution to revenue pipeline. - Quality and completeness of solution proposals (as measured by internal and client feedback). - Turnaround time for proposal and solution preparation. - Number of client workshops, demos, and PoCs supported. - Reuse and creation of proposal assets, accelerators, and case studies. - Collaboration effectiveness with sales and delivery teams.</p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Oman </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What if you could shape a career as unique as you? At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons.</p><p>Project Engineer who will be responsible for managing SCADA activities for projects shall undertake the following actions:</p><p>Supervision the delivery and implementation of NEDC s SCADA system in accordance with the Company s license conditions . Adhere to the Company s health, safety, environmental and security policies at all times and immediately report violations of these policies to NEDC s health, safety &amp; environment representatives Oversee the design and implementation of the Company s SCADA s system project. Develop and implement the transition strategy of the new SCADA system to operations Ensure that correct and accurate policies and procedures are in place for the new SCADA system Trouble shoots complete SCADA System and Maintain all SCADA components. Recommends updates to the SCADA system, as required Configure RTU s, communication modems and other SCADA devices End-To-End testing procedures review, approval, inspections and testing supervision. Supervise technical staff as required Review and approval of Operation and Maintenance (O&amp;M) Manuals. Oversee the development, management and implementation of annual work programs and budgets for implementation of the new SCADA system consistent with the NEDC s business strategy and business planning process Develop, implement and report against staff training programs to improve technical and management skills Other duties, as assigned by client.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in electrical engineering or related field. Professional engineering license preferred. In-depth knowledge of electrical systems, codes, and standards. Proven experience in project management and team leadership.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons. Project Engineer who will be responsible for managing quantity surveying for major and extension projects shall undertake the following actions based on the project contract documents, approved documents on material submittals &amp; method statements:</p><p>Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p><p>Monitor all the cost and contractual aspect and report to the Client</p><p>Provide the required technical support, assistance and advice on all aspects of quantity surveying activities covering measurement, certification and payments</p><p>Collect and check quantity measurements from the project site and Prepare the Quantity Survey Reports</p><p>Prepare of monthly Contractor s Interim Payment Certificate and preparation of Final Account</p><p>Assist in the interpretation of the meaning or intent of the Contract Documents, and analysis of any claims which may be submitted by the contractor.</p><p>Review claims submitted by the contractor</p><p>Ensure that full documentation and records are maintained in the Client s office facility to properly substantiate all Interim and Final Payments to the contractor to a standard acceptable to the Client.</p><p>Ensure materials utilised at project site confirming to approved make and prepare report in case on non-conformance</p><p>Co-ordination with project managers</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in Engineering or related field. Professional engineering license preferred. In-depth knowledge of electrical systems, codes, and standards. Proven experience in project management and team leadership.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What if you could shape a career as unique as you? At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons.</p><p>Manage and oversee engineering projects from inception to completion. Develop project plans, schedules, and budgets, ensuring adherence to timelines and budgetary constraints. Coordinate with project stakeholders, including clients, contractors, architects, and regulatory agencies. Conduct regular site visits to monitor progress, quality of work, and adherence to safety protocols. Address any site-related issues promptly, providing technical guidance and solutions as necessary. Ensure compliance with relevant building codes, regulations, and environmental standards. Review project designs, specifications, and drawings to ensure accuracy and feasibility. Provide input during the design phase to optimize construction processes and materials selection. Collaborate with design teams to resolve any design-related issues or modifications.</p><p>Quality Assurance/Quality Control (QA/QC): Implement QA/QC procedures to ensure construction work meets established standards and specifications. Conduct inspections and tests to verify the quality of materials and workmanship. Document and report any non-conformities or deviations, and work towards timely resolution.</p><p>Work closely with architects, structural engineers, and other professionals to coordinate interdisciplinary aspects of projects. Foster a collaborative and positive work environment, encouraging effective communication and teamwork. Provide mentorship and support to junior engineers and site staff as needed.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Civil Engineering or related field. Master's degree preferred. Professional Engineer (PE) license or eligibility for licensure. Proven experience in Electrical engineering, with a focus on site management and construction. Strong knowledge of construction methods, materials, and techniques.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Vehicle Inspector inspects all vehicle repairs to ensure maintenance is performed to the highest standard. Responsible for daily quality control of all vehicle repairs performed by the work center. Complies with all applicable USAF Technical Order (TO) requirements. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p><p>Principal Accountabilities</p><ul><li>Inspects all vehicle repairs to ensure Quality Control is maintained to the highest level.</li><li>Monitors quality of work performed by technicians and documents rejected vehicle repairs.</li><li>Ensures safety practices and housekeeping guidelines are maintained to the highest standard.</li><li>Conducts impromptu toolbox inspections for accountability and serviceability of assigned tools.</li><li>Informs the Chief Mechanic of any deficiencies noted.</li><li>Conducts Limited Technical Inspections (LTI's) on assigned vehicles and ensures inspections are performed within prescribed guidelines, determining the causes of malfunctions, extent of repairs required, parts required and cost of repair.</li><li>Assists with on-the-job training of new mechanics; provides knowledge, expertise and training to mechanics; provides task certification for mechanics in training and certifies periodic training.</li><li>Assists mechanics with repairs or replacement of parts and assemblies, realignment and adjustment systems including manual and automatic transmissions, steering and braking systems, clutches, fluid flywheels and torque converters, axle hubs and bearings, fuel air and cooling systems, suspension and body work.</li><li>Assists mechanics with troubleshooting and calibrating vehicle systems using diagrams, manuals, special tools, meters and test equipment.</li><li>Checks completeness and accuracy of maintenance forms such as work orders, parts requests and maintenance sheets; records data such as hours worked, work performed, speedometer/hour meter readings, parts used.</li><li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable reporting any deficiencies.</li><li>Assists with parts research by means of the Commercial Manuals, Technical Orders and parts manuals; checks all parts research to ensure accuracy and that only required repair parts are ordered.</li><li>Inspects vehicles after preparation of USAF vehicle assets for air/land/sea movement.</li><li>Ensures all hazardous materials are handled, stored and disposed of in accordance with Amentum Standard Operating Procedures (SOPs) and host nation rules.</li><li>Ensures that only current up-to-date Technical Orders and commercial manuals are used when repairing vehicles or assisting in repairs.</li><li>Uses Quality data base to enter and maintain all inspections required by SOP, WI's and all PWs publications.</li><li>Reports any discrepancies in shop first aid kits, fire extinguishers and eyewash stations.</li><li>Performs other duties as assigned.</li><li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Requirements</p><ul><li>Must have excellent organizational skills and be able to understand, speak, read and write English at an intermediate level.</li><li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li><li>Will be required to operate material handling equipment and light to heavy military type vehicles.</li><li>High School diploma or equivalent required.</li><li>Four years' experience in vehicle repair required with three years on USAF equipment required.</li><li>Two years' experience in a Quality Control capacity and the ability to mentor individuals on a corrective action plan.</li><li>Will be exposed to extreme noise from operating equipment.</li><li>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</li><li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li><li>Ability to travel domestically and internationally.</li></ul><p>Preferred Qualifications</p><ul><li>Proficiency in the use of personal computers with Windows Operating System and Microsoft Office to include as a minimum, Excel and Word systems is preferred.</li><li>Recognized national qualification in vehicle maintenance at a higher level preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Expert Lean Coach Grade Stream RPI Function Transformation &amp; Business Excellence Location Oman, Suhar Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Head of Continuous Improvement Direct reports - Job purpose This role leads the deployment strategies of continuous improvement culture and practices under the direction of the Head of Continuous Improvement and Principal Lean Coach, serving as the SME to identify improvement opportunities aligned with the business plan and enables teams by leading, training, and coaching them in structured problem solving, CI ways of working, and value driven improvement initiatives. This role also drives the CI Deployment and Governance including change management and stakeholder management in alignment and collaboration with the Principal Lean Coach and the Head of Continuous Improvement. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main tasks and responsibilities 1) CI Deployment Strategy and Governance Develop and refine the CI Deployment Strategy to align with organizational objectives with supervision of Principal CI Coach. Develop and deploy of the CI/Lean transformation roadmap across functions with supervision of Principal CI Coach. Facilitate the establishment and progression of CI maturity levels within the business. Drive change management efforts through the continuous improvement of systems, processes, and practices in line CI Deployment Strategies and evolving business needs. Establish and drive the Strategy and CI Deployment review with key stakeholders through periodic reviews (Cadence) 2) CI Frameworks and Standards Develop and execute Continuous Improvement (CI) culture implementation plans in alignment with organizational objectives. Maintain integrated CI deployment frameworks e.g., Yellow Belt (Rapid Problem Solving), Green Belt, Black Belt, Kaizen, CI Leadership, CI Fundamentals, Maturity Frameworks, Diagnostics etc. Set culture development and maturity objectives, create implementation plans, and motivate teams to participate and take ownership of improvements. Participate to develop CI standards, Systems, guidelines, and training materials to ensure consistency and excellence in CI deployment. 3) Training, Coaching and Capability Development Participate to Identify and develop training needs and assess the effectiveness of CI capability building activities in OQ RPI. Participate to develop training material and Co-facilitate training Delivery on CI methodologies, tools &amp; techniques to CI Practitioners, Sponsors, Champions, and project teams. Coach and mentor leaders, executives, and individuals on effective CI ways of working and leadership behaviours that support a continuous improvement culture. Build and enhance capabilities of CI Specialist, including conducting competency assessments and driving development plans. 4) Project Leadership, Facilitation and Execution Identify, prioritize &amp; define improvement opportunities in partnership with stakeholders, in alignment with business goals and objectives. Facilitate and lead cross-functional teams, ensuring effective collaboration and structured project execution. Facilitate and drive project stage gate reviews using standard reporting, ensuring clear documentation of progress and achievements. Monitor project execution through structured reviews, ensuring benefits are realized, risks are mitigated, and improvements are sustained. Facilitate and drive project stage gate reviews using standard reporting, ensuring clear documentation of progress and achievements. Actively participate in Performance Huddles to enable identification of improvement opportunities Lead complex improvement/ Black Belt projects and structured problem-solving workshops to address strategic business challenges. 5) CI Systems and Advanced analytical Expertise Provide expert support in advanced statistics, problem solving, and analytical methods to strengthen CI project rigor. Participate to develop and strengthen CI systems, tools, and digital solutions in OQ RPI 6) Business Partnership and Strategic Support Engage business leaders to understand business challenges, opportunities &amp; risks to facilitate and lead CI based integrated solutions e.g. KPI Cascade/Goal deployment, Performance management, Leader standard work etc. Build and execute (showcase) relevant CI solutions and practices that enable realization of strategic business goals and objectives Key interactions Internal: RPI External: Contractors, vendors, and providers. Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use. Education requirements Bachelor s degree in engineering, Lean Six Sigma Black Belt certificate, Train the Trainer (L&amp;D) certification, Coaching skills.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in engineering, Lean Six Sigma Black Belt certificate, Train the Trainer (L&amp;D) certification, Coaching skills. Project Management Certification, Coaching certificate (Preferred)</p> <p>Excellent proficiency in written, spoken, and reading English (required) | Arabic Native proficiency (desirable)</p> <p>8+ years of relevant experience on Continuous Improvement</p> <p>Working experience in:</p> <ul> <li>Leading, facilitating, and executing Business Process improvement projects (Lean Six Sigma, Kaizen events, Rapid Problem Solving).</li> <li>Develop Continuous improvement capabilities development (training &amp; coaching) for Green Belts and CI Leaders.</li> <li>Training &amp; Coaching executives and individuals on continuous improvement aspects covering Waste reduction, Variation reduction, Go-See / Process walks, LSW, Value Stream management, Process Analysis, Statistical and Graphical Analysis</li> <li>Stakeholder management and presentations to Executive Leadership</li> <li>Lead frameworks for CI Deployment under guidance of Principal.</li> <li>Lead CI Deployment Strategy under guidance of Principal.</li> <li>Operation or maintenance or Technical or services (in Refinery &amp; Petrochemical is preferable)</li> </ul> <p>Soft:</p> <ul> <li>Knowledge of Business System thinking/ interlinks.</li> <li>Skilled to engage stakeholder interests and priorities.</li> <li>Skilled facilitator</li> <li>Skilled at effective communication and relationship building.</li> <li>Skilled at Business perception/acumen and Strategy</li> <li>Skilled at Voice of Customer management</li> <li>Knowledge of best practices on Capability Development</li> <li>Skilled at developing others through Coaching &amp; mentoring.</li> <li>Skilled at best practices of Presentation</li> <li>Skilled at best practices of Training development and delivery</li> <li>Skilled at Project management and process management</li> <li>Skilled at best practices of Motivation and Team Leadership</li> <li>Knowledge of Change management</li> <li>Knowledge of Financial benefits quantification and validation that links projects to business impact (COPQ, productivity, cash flow, margin)</li> </ul> <p>Technical:</p> <ul> <li>Skilled at CI maturity levels and CI frameworks.</li> <li>Skilled at CI systems thinking/ interlinks.</li> <li>Strong skills on lean six sigma methodology, tools and practice</li> <li>Skilled at LSS Black Belt and Problem solving methodologies including different tools and techniques (DMAIC, Lean, PDCA, A3 thinking, Kaizen, Rapid problem solving, Process mapping etc.)</li> <li>Skilled at CI Ways of Working, Performance management practices covering KPI cascade, VM Board design, Huddles, Gap closure actions, CI Ideas management, and Leader standard work</li> <li>Skilled at Data management, advanced data analytics, and statistical software use</li> <li>Knowledge of Business diagnostics, value drivers, and improvement opportunity identification</li> <li>Knowledge of Hosin-kanri and Goal Deployment</li> </ul><p></p></section>