Heavy equipment mechanical engineer Jobs

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Automation is responsible for leading the maintenance, reliability, availability, and performance optimization of automation, process control, and industrial digital systems across the Copper Concentrator Plant.</p> <p>The role ensures the safe, reliable, and cost-effective operation of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA systems, Human Machine Interfaces (HMI), industrial communication networks, historians, servers, workstations, and associated automation infrastructure through effective maintenance strategies, shutdown planning, reliability improvement initiatives, cybersecurity compliance, asset integrity management, and continuous improvement programs.The position provides technical leadership to automation personnel, supports operational excellence, and maximizes plant availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of automation and control systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking &amp; Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure.</p> <p>The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>AUTOMATION &amp; CONTROL SYSTEM MANAGEMENT</p> <p>Lead maintenance activities for automation, process control, and industrial digital systems across the concentrator plant.</p> <p>Ensure automation systems support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize system reliability and availability.</p> <p>Monitor automation system performance and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, engineering standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on automation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for automation systems and equipment.</p> <p>DCS, PLC &amp; SCADA SYSTEMS</p> <p>Lead reliability improvement initiatives for DCS, PLC, SCADA, HMI, historian, and control system infrastructure.</p> <p>Manage automation system architecture, configuration, and performance optimization.</p> <p>Support troubleshooting of control logic, process interlocks, alarms, permissives, and control loops.</p> <p>Ensure backup, restore, and disaster recovery procedures are maintained and tested.</p> <p>Manage automation software version control and change management processes.</p> <p>Review and approve DCS, PLC, and SCADA modifications.</p> <p>Ensure documentation, logic diagrams, and system architecture drawings remain updated.</p> <p>MOC &amp; CHANGE GOVERNANCE</p> <p>Ensure automation system modifications, upgrades, software changes, and configuration changes are managed through the approved Management of Change (MOC) process.</p> <p>Review proposed changes to DCS, PLC, SCADA, HMI, historian, control logic, alarms, interlocks, and associated automation infrastructure for technical and operational impacts.</p> <p>Ensure appropriate risk assessments, technical reviews, testing requirements, approvals, and implementation plans are completed before changes are introduced.</p> <p>Coordinate with Operations, Instrumentation, Electrical, Reliability, Projects, and relevant stakeholders during automation change activities.</p> <p>Ensure backup and recovery arrangements are completed before implementing critical system changes.</p> <p>Support FAT, SAT, simulation, functional testing, commissioning, and post-implementation verification of automation modifications.</p> <p>Ensure updated logic diagrams, configuration records, I/O documentation, system architecture drawings, software versions, and other technical documents are maintained following approved changes.</p> <p>Participate in post-change reviews and verify that modifications achieve the intended reliability, safety, control-performance, and operational objectives.</p> <p>PROCESS CONTROL &amp; OPTIMIZATION</p> <p>Support operational performance through advanced process control and automation improvements.</p> <p>Analyze process performance and identify opportunities for control optimization.</p> <p>Support tuning of control loops and optimization of process control strategies.</p> <p>Drive initiatives aimed at improving throughput, recovery, plant stability, and energy efficiency.</p> <p>Support implementation of advanced process control technologies and digital solutions.</p> <p>Work closely with Operations and Metallurgical teams to optimize plant performance.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor's Degree in Automation Engineering, Control Systems Engineering, Electrical &amp; Automation Engineering, Mechatronics Engineering, Instrumentation &amp; Control Engineering, or related discipline is mandatory.</p> <p>Experience:</p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Automation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Automation assets in large-scale mineral processing facilities.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> ISA Certified Automation Professional (CAP)</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP)</p> <p> ISA Certified Control Systems Technician (CCST)</p> <p> Six Sigma (BB)</p> <p><br></p>

<p><br></p><p>Below are the open positions:</p><p>A) Senior Estimation &amp; Proposal Engineer</p><p>1) Degree in Mechanical Engineering.</p><p>2) 8+ years of experience in Estimation &amp; Proposal writing</p><p>3) Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</p><p>4) Strong knowledge of international codes and standards</p><p>5) Strong knowledge of international codes and standards</p><p>6) Experience in bidding for long-term contracts is an added advantage.</p><p>7) Familiarity with local construction codes and regulations.</p><p>8) Working knowledge of PDO, OQ, and Oxy specifications.</p><p>9) Experience in contract processing and contract management.</p><p>10) GCC / Oman experience is a must</p><p>B) Sales Engineer (Rotating &amp; Static)</p><p>1) Degree in Mechanical / Chemical Engineering.</p><p>2) Identify, target and create prospects for business development.</p><p>3) Sales and marketing activities for the Principal / representing companies and their products.</p><p>4) Manage various aspects of project information in to competitive intelligence system</p><p>5) Networking with key personnel of both clients and Principals</p><p>6) To meet or exceed sales targets consistently</p><p>7) Responsible for sending product information, proposals and quotes, correspondence to follow up and to generate new sales, and maintaining accurate database of all contact interactions</p><p>8) To prepare tenders for various projects involving equipment</p><p>9) Reporting to the Sales Manager</p><p>10) GCC / Oman experience is a must</p><p>C) Painting &amp; Coating Inspector</p><p>1) Diploma / Degree in Mechanical, Chemical, or related engineering discipline.</p><p>2) Minimum 5 years of experience in painting/coating inspection for oil &amp; gas, industrial, or EPCC projects in Oman or the GCC, including workshop / manufacturing environments.</p><p>3) Valid BGAS or NACE Level II Coating Inspector certificate (mandatory).</p><p>4) Hands-on expertise in inspection of piping external, vessel internal/external, and storage tank internal/external painting/coating applications.</p><p>5) Solid knowledge of applicable international codes and standards.</p><p>D) QCI Painting Inspector</p><p>1) Diploma / Degree.</p><p>2) Minimum 5 years in these Minimum 3 years overseas experience in QA / QC Painting Inspector works, for Refinery / Petrochemical / Oil &amp; Gas Projects (Storage Tanks, Pressure Vessel, Piping &amp; Structure).</p><p>3) Well experienced in Tank internal / external painting system including GRE coating.</p><p>4) Knowledge in ASTM, ISO, SSPC and NACE</p><p>E) HSE Officer</p><p>1) Bachelor s degree in Occupational Health &amp; Safety, Environmental Science, Engineering, or related field.</p><p>2) HSE certification (NEBOSH, IOSH, OSHA, etc.) is highly desirable</p><p>3) 3-5 years of experience in a safety role, preferably in the oil and gas / Petrochemical / Refinery industry.</p><p>F) Senior Planning &amp; Project Control Engineer</p><p>1) Diploma / B. Tech / BE, Mechanical Engineering. PMP Certification.</p><p>2) 15+ years related experience and minimum 8+ years experience in the Planning engineer position with independently preparing project construction plans and schedules with resources schedules (Manpower/Materials/Equipment), control of major EPC Projects in Oil &amp; Gas industry and Fabrication Shop</p><p>3) Capable of preparing Project planning deliverables, Master schedules and Issuance of company procured and Client supply materials.</p><p>4) Progress reporting (External to Clients &amp; Internally to Management) including updating, monitoring and project controls. Responsible for development of Work breakdown Structure, Earned value and performance measurement for each project.</p><p>5) Coordinate between Engineering, Procurement, Suppliers and Construction teams during design and construction phases.</p><p>6) Experience in managing multiple subcontractors with high value subcontracts.</p><p>7) Independently manage planning and project control functions for EPC projects.</p><p>8) Prepare and update baseline schedules using Primavera (P6) or equivalent tools.</p><p>9) Track progress and prepare daily, weekly, and monthly reports.</p><p>10) Conduct delay analysis and propose mitigation plans. Issue cost reports and VOWD reports.</p><p>G) Permit Holder (Mechanical)</p><p>1) Diploma / Degree in Mechanical Engineering.</p><p>2) (PDO/ OQ valid permit cards preferred)</p><p>H) Senior HR Executive (Chennai Location)</p><p>1) MBA in Human Resource.</p><p>2) Must be having 2-5 years experience in recruitment for workmen and staff category.</p><p>3) Lead end-to-end recruitment process, attracting the most suitable candidate to support business objectives. (Blue &amp; White Collar)</p><p>4) Collaborate with line managers and division head, to understand manpower needs and ensure a streamlined recruitment experience.</p><p>5) Domestic Travelling required, as per work scope.</p><p>6) Foster positive employee relations by addressing concerns, resolving conflicts, and promoting collaborative work environment.</p><p>7) Coordinate with team to understand the training requirement.</p><p>8) Oversee the performance management process, ensure fair and transparent evaluation.</p><p>9) Work closely with division to set the performance expectation and to provide feedback to the employee.</p><p>10) Manage and administer the monthly payroll and C&amp;B program.</p><p>11) Ensure compliance with relevant labour laws and industry standards.</p><p>12) Devise the compensation schemes and implement to ensure employee motivation.</p><p>13) Develop and update HR policies and procedures, ensuring alignment with legal requirements and best practices.</p><p>14) Stay informed about the changes in labor laws and update organization policies accordingly.</p><p>15) Update the ISO audit related documents.</p><p>16) Collaborate with relevant stakeholders to create a positive and supportive work environment.</p><p>17) Organize orientation for new employees and exit interview.</p><p>18) Organize the camp inspection with the support of Admin, so a better living environment.</p><p>19) Maintain records for each employee.</p><p>20) Establish and maintain medical service providers, ensuring their continuous development.</p><p>21) Evaluate and select insurance policies and vendors.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Mechanical Engineering.</li><li>8+ years of experience in Estimation &amp; Proposal writing</li><li>Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</li><li>Strong knowledge of international codes and standards</li><li>Familiarity with local construction codes and regulations.</li><li>Working knowledge of PDO, OQ, and Oxy specifications.</li><li>Experience in contract processing and contract management.</li><li>GCC / Oman experience is a must</li></ul>

<p><b>Job purpose</b></p><p><br></p><p>Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework.</p><p><br></p><p>&nbsp;</p><p><br></p><p>The position will act in accordance with the OQEP’s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani’s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><br></p><p><b>Main Tasks and Responsibilities</b></p><p><br></p><p>Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications.</p><p>Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities.</p><p>Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation.</p><p>Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent).</p><p>Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP.</p><p>Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects.</p><p>Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards.</p><p>Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase.</p><p>Support the preparation and review of technical safety documentation for regulatory submissions and engineering authority approvals.</p><p>Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle.</p><p>Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes.</p><p>Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments.</p><p>Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly.</p><p>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</p><p>Perform other related duties as assigned.</p><p>Key interactions</p><p><br></p><p>Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function.</p><p><br></p><p>External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities.</p><p><br></p><p>Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><b><br></b></p><p><b>Education requirements</b></p><p><br></p><p>Required: Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</p><p><br></p><p>Preferred: Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (TÜV or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</p><p><br></p><p>Language</p><p><br></p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p><br></p><p>Background and experience</p><p><br></p><p>Competencies and skills</p><p><br></p><p>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</p><p>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</p><p>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</p><p>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</p><p>Exposure to Fire &amp; Gas system design and philosophy development.</p><p>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</p><p>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</p><p>Soft:</p><p><br></p><p>Strong analytical and problem-solving skills.</p><p>Good communication skills, verbal and written.</p><p>Attention to detail and high level of technical accuracy.</p><p>Ability to work effectively in multidisciplinary project teams.</p><p>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</p><p>Ability to manage competing priorities in a project environment.</p><p>Cultural sensitivity in a multinational environment.</p><p>&nbsp;</p><p><br></p><p>Technical:</p><p><br></p><p>Computer literacy including MS Office and engineering software.</p><p>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</p><p>Quantitative and qualitative risk assessment techniques.</p><p>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</p><p>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</p><p>Fire &amp; Gas detection system design and philosophy.</p><p>Safety Case development and Major Accident Hazard (MAH) management.</p><p>Process safety engineering principles.</p><p>Applicable international standards (API, IEC, NFPA, IP codes).</p><p>Technical documentation and report writing.</p><p>&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main Tasks and Responsibilities</strong></p><ul><li>Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications.</li><li>Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities.</li><li>Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation.</li><li>Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent).</li><li>Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP.</li><li>Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects.</li><li>Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards.</li><li>Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase.</li><li>Support the preparation and review of technical safety documentation for regulatory submissions and engineering authority approvals.</li><li>Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle.</li><li>Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes.</li><li>Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments.</li><li>Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly.</li><li>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</li><li>Perform other related duties as assigned.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function.</li><li>External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities.</li></ul><p><strong>Notable Working Conditions.</strong></p><ul><li>Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><ul><li>Required: Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</li><li>Preferred: Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (T V or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</li><li>Language: Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li></ul><p><strong>Background and experience</strong></p><ul><li>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</li><li>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</li><li>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</li><li>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</li><li>Exposure to Fire &amp; Gas system design and philosophy development.</li><li>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</li><li>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</li></ul><p><strong>Competencies and skills</strong></p><ul><li>Soft: Strong analytical and problem-solving skills. Good communication skills, verbal and written. Attention to detail and high level of technical accuracy. Ability to work effectively in multidisciplinary project teams. Self-motivated with a proactive approach to identifying and resolving technical safety issues. Ability to manage competing priorities in a project environment. Cultural sensitivity in a multinational environment.</li><li>Technical: Computer literacy including MS Office and engineering software. Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie). Quantitative and qualitative risk assessment techniques. Consequence modelling tools (PHAST, Safeti, FRED, or equivalent). Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511). Fire &amp; Gas detection system design and philosophy. Safety Case development and Major Accident Hazard (MAH) management. Process safety engineering principles. Applicable international standards (API, IEC, NFPA, IP codes). Technical documentation and report writing.</li></ul>

<p><h4>Mechanical TFA – SGT-4000F / V94.3 Gas Turbine</h4> <p>We are seeking an experienced Mechanical Technical Field Advisor (TFA) with hands-on experience on Siemens SGT-4000F / V94.3 gas turbines.</p> <h4>Key Requirements:</h4> <ul> <li>Proven experience on SGT-4000F / V94.3 gas turbines.</li> <li>Strong mechanical field experience in planned outages, forced outages, inspections, and maintenance activities.</li> <li>Previous working experience with OEMs, particularly Siemens, will be highly preferred.</li> <li>Ability to support outage activities, troubleshooting, and field execution activities on site.</li> <li>Willingness to relocate and work across the Middle East.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Experience in power plant maintenance and outage execution.</li> <li>Strong communication and reporting skills.</li> <li>Ability to work in a multicultural and fast-paced environment.</li> </ul></p><p></p>

<p><b>Brief Posting Description </b></p> <p>The Engineer Maintenance Contracts is responsible for administering and managing maintenance service contracts, supporting contractor performance management, coordinating procurement and commercial activities related to maintenance services, and ensuring contractual compliance across all maintenance operations. The role supports maintenance execution by managing contractor resources, contract documentation, tendering activities, service agreements, cost control, and vendor performance to ensure safe, reliable, and cost-effective plant operations. The position plays a key role in establishing contract management processes and supporting commissioning, start-up, and sustainable operational performance.</p> <p><b>Detailed Description </b></p> <p>CONTRACT ADMINISTRATION &amp; MANAGEMENT</p> <p>Administer maintenance service contracts, agreements, and framework arrangements to ensure compliance with company requirements and contractual obligations.</p> <p>Review, prepare, and manage scopes of work, technical specifications, service agreements, and contract documentation.</p> <p>Coordinate contract tendering, bid evaluations, technical assessments, and contractor selection processes.</p> <p>Monitor contract performance against agreed KPIs, deliverables, and service levels.</p> <p>Manage contract variations, claims, extensions, and contract close-out activities.</p> <p>Maintain accurate contract records, correspondence, and commercial documentation.</p> <p>Ensure all contracts are administered in accordance with company procurement and governance procedures.</p> <p>Use SAP for resource planning and manning</p> <p>Generate Power BI reports for contracts administration</p> <p>CONTRACTOR PERFORMANCE MANAGEMENT</p> <p>Monitor contractor performance, productivity, and compliance with contractual requirements.</p> <p>Conduct regular contractor performance reviews and KPI assessments.</p> <p>Coordinate contractor mobilization and demobilization activities.</p> <p>Support development and implementation of contractor improvement plans where required.</p> <p>Ensure contractor resources meet operational, technical, and safety requirements.</p> <p>Maintain effective working relationships with contractors, suppliers, and external service providers.</p> <p>PROCUREMENT &amp; COMMERCIAL SUPPORT</p> <p>Work closely with Procurement and Maintenance teams to support sourcing of maintenance services and contracts.</p> <p>Participate in commercial and technical evaluations of contractor bids and proposals.</p> <p>Support contract negotiations, renewals, and service level agreements.</p> <p>Review contractor invoices and verify work completion in accordance with contract terms.</p> <p>Assist in the preparation of budget estimates and cost forecasts related to maintenance contracts.</p> <p>Identify opportunities for cost optimization and value improvement while maintaining service quality.</p> <p>MAINTENANCE SUPPORT COORDINATION</p> <p>Coordinate with maintenance planners, supervisors, and operations teams to ensure contracted services are delivered effectively.</p> <p>Support execution of planned maintenance, shutdowns, and special projects through contractor coordination.</p> <p>Ensure timely availability of external specialist services and OEM support.</p> <p>Facilitate communication between contractors and site stakeholders.</p> <p>Monitor contractor resource allocation to support maintenance objectives.</p> <p>SHUTDOWN &amp; PROJECT CONTRACT SUPPORT</p> <p>Support contract planning and administration activities for shutdowns, turnarounds, and major maintenance projects.</p> <p>Coordinate contractor readiness reviews, resource planning, and mobilization requirements.</p> <p>Monitor contractor performance during shutdown execution.</p> <p>Assist with post-shutdown contract evaluations and lessons learned reviews.</p> <p>PERFORMANCE MONITORING &amp; REPORTING</p> <p>Develop and maintain contract performance reports and dashboards.</p> <p>Monitor and report key performance indicators, including:</p> <p>Contractor Performance</p> <p>Service Level Compliance</p> <p>Contract Utilization</p> <p>Cost Performance</p> <p>Contractor Safety Performance</p> <p>Invoice Processing Efficiency</p> <p>Prepare periodic reports for management on contract status and performance.</p> <p>Analyze trends and recommend improvement opportunities.</p> <p>SAFETY, QUALITY &amp; COMPLIANCE</p> <p>Ensure contractors comply with company health, safety, environmental, and quality requirements.</p> <p>Participate in contractor safety audits, inspections, and risk assessments.</p> <p>Verify contractor compliance with permit-to-work systems and site procedures.</p> <p>Support incident investigations involving contractors and ensure corrective actions are implemented.</p> <p>Promote a strong safety culture and adherence to company standards.</p> <p>STAKEHOLDER MANAGEMENT</p> <p>Maintain effective relationships with internal stakeholders, contractors, suppliers, and service providers.</p> <p>Provide contract-related advice and support to Maintenance, Procurement, Finance, and Operations teams.</p> <p>Support development and implementation of contract management best practices.</p> <p>Participate in continuous improvement initiatives to enhance contract performance and operational efficiency.</p> <p>COST CONTROL &amp; BUDGET MANAGEMENT</p> <p>Monitor maintenance contract expenditures against approved budgets.</p> <p>Track contractor costs and service contract performance.</p> <p>Review cost trends and identify opportunities for savings.</p> <p>Support annual budgeting and forecasting activities for maintenance contracts.</p> <p>Ensure accurate cost allocation and reporting for contracted services.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> </p> <p> Bachelor s degree or Higher Diploma</p> <p> </p> <p>Experience: </p> <p> Bachelor s degree with 7+ years or Higher Diploma with 10+ years of maintenance planning, shutdown planning, contracts administration, or maintenance management experience in mining, minerals processing, or heavy industrial operations.</p> <p> Proven experience with large-scale shutdown planning and contractor management.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirable</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> </p> <p> Six-sigma (BB)</p> <p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: Mechanical Supervisor</p><p>Reports To: Maintenance Manager / Mechanical Engineering Manager / Site Manager</p><p>Job Details</p><p>Number of Vacancies: 55 Positions</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The Mechanical Supervisor is responsible for supervising and coordinating mechanical maintenance and installation activities across site operations. The role ensures that mechanical systems, equipment, and machinery are operating efficiently, safely, and in compliance with company standards and procedures.</p><p>Key Responsibilities</p><ul><li>Supervise daily mechanical maintenance and installation activities on site.</li><li>Assign tasks to technicians and ensure proper execution of work plans.</li><li>Monitor performance of mechanical systems, equipment, and machinery.</li><li>Ensure preventive and corrective maintenance activities are completed on time.</li><li>Inspect completed work to ensure quality standards and technical specifications are met.</li><li>Support troubleshooting and resolution of mechanical faults and breakdowns.</li><li>Ensure compliance with safety regulations and company procedures.</li><li>Coordinate with engineering and operations teams for maintenance planning.</li><li>Maintain maintenance records, reports, and work logs.</li><li>Ensure proper use of tools, equipment, and materials.</li><li>Support training and guidance of junior technicians and workers.</li></ul><p>Qualifications</p><p>Bachelor s Degree only in Mechanical Engineering or a related field.</p><p>Experience</p><p>Practical Experience: 0 years (Fresh graduates only)</p><p>No prior experience required.</p><p>Technical Skills</p><ul><li>Basic understanding of mechanical systems, maintenance, and equipment operations.</li><li>Ability to read technical drawings and maintenance manuals.</li><li>Familiarity with preventive maintenance procedures.</li><li>Basic knowledge of Microsoft Office (Word, Excel, Outlook).</li></ul><p>Soft Skills</p><ul><li>Strong leadership and supervisory skills.</li><li>Good communication and coordination abilities.</li><li>Problem-solving and decision-making skills.</li><li>Attention to detail and responsibility.</li><li>Ability to work under pressure and in field environments.</li><li>Team management and task organization skills.</li></ul><p>Working Conditions</p><ul><li>Site-based and operational work environment.</li><li>May require field supervision and outdoor work.</li><li>Standard working hours with possible overtime depending on project needs.</li></ul><p>Application Note :</p><p>The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age</p><p>The closing date is 3rd August 2026.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree only in Mechanical Engineering or a related field.</li><li>Practical Experience: 0 years (Fresh graduates only)</li><li>No prior experience required.</li><li>Basic understanding of mechanical systems, maintenance, and equipment operations.</li><li>Ability to read technical drawings and maintenance manuals.</li><li>Familiarity with preventive maintenance procedures.</li><li>Basic knowledge of Microsoft Office (Word, Excel, Outlook).</li><li>Strong leadership and supervisory skills.</li><li>Good communication and coordination abilities.</li><li>Problem-solving and decision-making skills.</li><li>Attention to detail and responsibility.</li><li>Ability to work under pressure and in field environments.</li><li>Team management and task organization skills.</li><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>

<p><h4>Mechanical TFA – SGT-4000F / V94.3 Gas Turbine</h4> <p>We are seeking an experienced Mechanical Technical Field Advisor (TFA) with hands-on experience on Siemens SGT-4000F / V94.3 gas turbines.</p> <h4>Key Requirements:</h4> <ul> <li>Proven experience on SGT-4000F / V94.3 gas turbines.</li> <li>Strong mechanical field experience in planned outages, forced outages, inspections, and maintenance activities.</li> <li>Previous working experience with OEMs, particularly Siemens, will be highly preferred.</li> <li>Ability to support outage activities, troubleshooting, and field execution activities on site.</li> <li>Willingness to relocate and work across the Middle East.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Experience in power plant maintenance and outage execution.</li> <li>Strong communication and reporting skills.</li> <li>Ability to work in a multicultural and fast-paced environment.</li> </ul></p><p></p>

<p>Required Mechanical&nbsp; Site Supervisor<br>Diploma in mechanical, Having Experience in plate and structure fabrication, Shutdown work.&nbsp;<br>Industry:&nbsp; preferably cement, steel, fertilizer industry experience.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Role: Operations, Maintenance &amp; Support - Other</b></p><p>Industry Type: Oil &amp; Gas</p><p>Department: Production, Manufacturing &amp; Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Operations, Maintenance &amp; Support</p><p>Education</p><p>UG: B.Tech / B.E. in Mechanical Engineering, Civil</p></div></section>

<p>Implement and maintain QA/QC procedures for electrical works in accordance with project specifications and quality standards. Prepare and review Inspection &amp; Test Plans (ITP), Method Statements, Checklists, and Quality Control Procedures. Conduct inspections of electrical installation and construction activities. Ensure electrical works comply with approved drawings, specifications, codes, and applicable standards. Inspect electrical equipment, materials, cable installations, termination, earthing, testing, and commissioning activities. Coordinate with site engineers, subcontractors, consultants, and client representatives for inspections and approvals. Prepare and maintain quality documentation, inspection reports, test reports, and project quality records. Identify quality issues, non-conformities, and deviations and coordinate corrective/preventive actions. Raise and close NCRs, observations, and punch points as required. Monitor material inspections and ensure materials conform to approved specifications. Participate in testing and commissioning inspections of electrical systems and equipment. Ensure proper implementation of ISO 9001:2015 quality management requirements. Support internal quality audits and maintain audit-related documentation. Monitor subcontractor quality performance and ensure compliance with project requirements. Coordinate with the project team to ensure timely completion of inspection and quality requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>BE/B.Tech in Electrical Engineering / EEE . Minimum 5+ years of relevant experience in Electrical QA/QC. ISO 9001:2015 Internal Auditor certification is required. Strong knowledge of electrical installation, inspection, testing, and commissioning. Good understanding of QA/QC procedures and documentation. Experience with ITP, Method Statements, NCR, MIR, WIR, inspection checklists, and quality reports . Knowledge of relevant electrical codes, standards, and project specifications. Substation / Switchyard project experience will be an added advantage. Strong communication, coordination, and documentation skills. Ability to work independently and coordinate effectively with site teams and clients.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p><p><br></p><p>Handle quantity surveying, cost control, BOQs, variation orders, claims, and progress measurement for multi-discipline works.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Degree/Diploma in Civil/Mechanical Engineering with 12 to 15 years (GCC preferred)</p><p></p></section>

<p><b>JOB PURPOSE</b></p> <p>The Planning and Contracts Lead Engineer is responsible for developing, implementing, and managing maintenance planning, scheduling, work management, shutdown planning, contractor administration, and maintenance control processes to ensure safe, reliable, and efficient plant operations.The role provides leadership in maintenance planning and resource coordination, oversees contract administration and contractor performance, and ensures the effective utilization of labor, materials, and services. A key focus of the position is establishing maintenance planning systems, CMMS processes, contract management frameworks, and work management standards to support commissioning, start-up, and sustainable plant operations.</p> <p> </p> <p><b><br></b></p><p><b>MAIN TASKS, DUTIES AND RESPONSIBILITIES</b></p> <p>MAINTENANCE PLANNING &amp; SCHEDULING</p> <p> Develop and implement maintenance planning and scheduling processes.</p> <p> Ensure all preventive, predictive, corrective, and shutdown maintenance activities are properly planned and scheduled.</p> <p> Review work requests and convert approved work into executable job plans.</p> <p> Develop detailed work packs including labor requirements, materials, tools, permits, and procedures.</p> <p> Coordinate weekly and monthly maintenance schedules with Operations and Maintenance teams.</p> <p> Monitor schedule compliance and planning effectiveness.</p> <p> Ensure maintenance backlogs are effectively managed and prioritized.</p> <p> Support development of maintenance strategies for critical equipment.</p> <p> Own and govern the site's maintenance work management process, ensuring compliance with planning, scheduling, execution, and close-out standard</p> <p> Coordinate with warehouse and procurement teams to ensure timely availability of critical spares and shutdown materials</p> <p> Develop and maintain maintenance performance dashboards, reporting automation, and planning analytics tools to improve decision-making</p> <p> Coordinate and lead weekly, monthly and quarterly planning meetings in coordination with stakeholders</p> <p>WORK MANAGEMENT &amp; CMMS ADMINISTRATION</p> <p> Manage maintenance work management processes within ERP/CMMS systems.</p> <p> Ensure work order quality, data accuracy, and system compliance.</p> <p> Develop and maintain equipment hierarchies, asset registers, and maintenance plans.</p> <p> Monitor key work management KPIs.</p> <p> Maintain planning and scheduling standards across all maintenance disciplines.</p> <p> Ensure historical maintenance records are maintained for reliability analysis.</p> <p> Drive continuous improvement of CMMS utilization and effectiveness.</p> <p>CONTRACTS ADMINISTRATION</p> <p> Administer maintenance service contracts and agreements.</p> <p> Monitor contractor performance against contractual obligations and KPIs.</p> <p> Coordinate tender evaluations and contractor selection processes.</p> <p> Review scope-of-work documents, service agreements, and technical specifications.</p> <p> Support commercial negotiations and contract renewals.</p> <p> Ensure contract compliance with company policies and procurement procedures.</p> <p> Manage contractor claims, variations, and contract close-out activities.</p> <p> Maintain contract documentation and administration records.</p> <p>SHUTDOWN &amp; TURNAROUND PLANNING</p> <p> Lead planning and preparation for plant shutdowns, turnarounds, and major maintenance campaigns.</p> <p> Develop integrated shutdown schedules and resource plans.</p> <p> Coordinate labor, equipment, materials, and contractor requirements.</p> <p> Monitor shutdown planning milestones and readiness reviews.</p> <p> Support execution teams during shutdown implementation.</p> <p> Facilitate shutdown governance meetings, readiness reviews, and critical path monitoring activities</p> <p> Conduct post-shutdown reviews and lessons learned assessments.</p> <p>PERFORMANCE MONITORING &amp; REPORTING</p> <p> Develop maintenance planning and execution performance dashboards.</p> <p> Monitor KPIs including: </p> <p>o Schedule Compliance</p> <p>o PM Compliance</p> <p>o Backlog Management</p> <p>o Work Order Closure Rates</p> <p>o Contractor Performance</p> <p>o Maintenance Cost Performance</p> <p>o Shutdown Performance</p> <p> Prepare weekly and monthly maintenance performance reports.</p> <p> Analyze trends and recommend improvement initiatives.</p> <p> Support annual maintenance budgeting and forecasting processes.</p> <p><br></p> <p> </p> <p> </p>

<p><b>❖ PIPELINE ENGINEER</b></p><p>Shortlisting in Progress URGENT RECRUITMENT</p><p>Education: Degree/Diploma in Mechanical Engineering. Experience: Minimum 7 years relevant Oil &amp; Gas</p><p>construction experience, including 5 years in the Middle East, in a supervisory position.</p><p>Technical Skills: Strong knowledge of pipeline welding, lowering, HSS coating, STOPAQ application and box-up activities.</p><p>Test Packs &amp; Documentation: Prepare test packs, review as-built drawings, and ensure completed works comply with Company standards before handover.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>HYDROTEST ENGINEER</p><p>Shortlisting in Progress URGENT RECRUITMENT</p><p>Education: Diploma or Bachelor's Degree in Engineering, preferably Mechanical Engineering.</p><p>Experience: Minimum 7 years relevant experience in onshore Oil &amp; Gas construction, including 5 years in Middle East Oil &amp; Gas in a supervisory role.</p><p>Hydrotesting Experience: Strong experience in pipeline and piping hydrotesting, including cleaning, gauging and pressure testing activities.</p><p>Technical Skills: Sound knowledge of hydrotest</p><p>procedures, specifications, standards, documentation and site execution.</p><div><br></div><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>Job title Sr. Engineer, Technical Safety Grade Stream Operated Assets Function Projects Delivery Engineering Location Oman Muscat / Project Sites Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Manager, Technical Safety Direct Reports - Job purpose Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main Tasks and Responsibilities Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications. Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities. Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation. Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent). Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP. Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects. Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards. Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase. Support the preparation and review of technical documentation for regulatory submissions and engineering authority approvals. Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle. Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes. Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments. Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly. Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture. Perform other related duties as assigned. Key interactions Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function. External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities. Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</li><li>Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (T V or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</li><li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li><li>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</li><li>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</li><li>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</li><li>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</li><li>Exposure to Fire &amp; Gas system design and philosophy development.</li><li>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</li><li>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</li><li>Strong analytical and problem-solving skills.</li><li>Good communication skills, verbal and written.</li><li>Attention to detail and high level of technical accuracy.</li><li>Ability to work effectively in multidisciplinary project teams.</li><li>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</li><li>Ability to manage competing priorities in a project environment.</li><li>Cultural sensitivity in a multinational environment.</li><li>Computer literacy including MS Office and engineering software.</li><li>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</li><li>Quantitative and qualitative risk assessment techniques.</li><li>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</li><li>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</li><li>Fire &amp; Gas detection system design and philosophy.</li><li>Safety Case development and Major Accident Hazard (MAH) management.</li><li>Process safety engineering principles.</li><li>Applicable international standards (API, IEC, NFPA, IP codes).</li><li>Technical documentation and report writing.</li></ul>

<p>The Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases. Procurement Coordination Obtain quotations from suppliers and subcontractors. Evaluate supplier offers technically and commercially. Negotiate prices to achieve competitive costing. Prepare comparison statements. Recommend suitable vendors. Tender Documentation Prepare complete tender submissions. Compile compliance statements. Prepare technical submittals. Prepare deviations and clarification documents. Assist in pre-qualification documentation. Client Coordination Attend pre-bid meetings. Conduct site visits before tender submission. Clarify technical queries with consultants and clients. Respond to tender clarifications. Project Handover to execution team Hand over awarded projects to the execution team. Explain estimation assumptions and exclusions. Support procurement during project execution. Cost Control Monitor estimated vs. actual project costs. Maintain cost history for future estimates. Identify opportunities for cost reduction.</p><p><strong>Desired Candidate Profile</strong></p><p>Need Estimation Engineer Fire &amp; Safety is responsible for preparing accurate cost estimates, technical proposals, and tender submissions for Fire Protection, Fire Alarm, Fire Fighting, Fire Suppression and other ELV systems. The role involves reviewing tender documents, preparing BOQs, coordinating with suppliers and subcontractors, ensuring compliance with project specifications and relevant standards, and supporting the sales and project teams throughout the tendering process. Tender &amp; Estimation Review tender documents, specifications, drawings, and BOQs. Prepare detailed cost estimates (abstract) for Fire &amp; Safety maintenance &amp; projects. Calculate material, labour, equipment, execution costs. Prepare technical and commercial proposals. Develop quantity take-offs from drawings. Analyze tender risks and recommend mitigation measures. Prepare value engineering proposals where applicable. Maintain estimation records and cost databases.</p>

<p>An international company based at Oman into Port shipping industry Port Construction Site Supervision Team We are hiring for multiple requirements for Oman location, please find the requirements below. 1 Resident Engineer 2 Breakwater Engineer 3 Jetties Engineer 4 Yard &amp; Infrastructure Engineer 5 Buildings Engineer 6 Material Handling System Expert 7 Electrical Engineer 8 Quarry Engineer (to ensure proper quality and gradation of rock supplied for the breakwater in accordance with the design requirements) Mine Development Design Review &amp; Site Supervision Team 9 Resident Engineer 10 Mechanical Engineer (Crusher) 11 Civil Engineer 12 Electrical Engineer Additional Supporting Staff 13 Hydrographic Surveyor / Quantity Surveyor 14 Billing Engineer (for verification and certification of the Contractor's monthly payment applications) 15 QA/QC Technicians 16 Underwater Inspector 17 Environmental &amp; Social Officer 18 Document Controller This job is renewable for 2 years. Salary : Omani Rial 1200 - 1300 per month (In Indian Rs. 3,00,000 - 3,25,000 per month)</p><p><strong>Desired Candidate Profile</strong></p><p>1. Candidate with engineer back ground.<br>2. Willing to work in port industry</p>

<p><br></p><p><strong>MANAGERIAL RESPONSIBILITIES:</strong></p><ul><li>Create a strategic plan of action for the Rotating Equipment Engineering Services to achieve the goal of zero incidents at the Qalhat LNG Complex for project phase, including adoption of best practices from the industry and budget allocations.</li><li>Build, coach, and performance manage the rotating equipment team; develop succession and capability.</li><li>Manage interfaces with owners, EPC/EPCM, OEMs, utilities/authorities, insurers, and operations/maintenance.</li><li>Provide executive level reporting and decision support.</li><li>Set clear goals and expectations for team members, regularly assess their performance against the set goals, and provide constructive feedback for continuous improvement</li><li>Devote time to train team members on new ways of working, developing new competencies, and upskilling to drive performance and productivity</li></ul><p><strong>FUNCTIONAL RESPONSIBILITIES:</strong></p><p><strong>Projects/Asset Management and Delivery:</strong></p><ul><li>Oversee concept/FEED, detailed design, and interdisciplinary interfaces (civil/structural, mechanical, I&amp;C, telecoms).</li><li>Validate vendor data/OEM integration; ensure operability, maintainability, and reliability targets.</li><li>Design the rotating equipment equipment, rotating equipment distribution and generation system in accordance with HSSE standards, OLNG standards and other regulatory requirements.</li><li>Acts as the subject matter expert (SME) definitive source of knowledge, technique, and expertise within his/her area to provide professional and technical insight for design, engineering and/or complex trouble-shooting activities.</li><li>Mastery Specialist skills on a selected equipment is desirable.</li><li>Skills in load flow system studies, fault level calculations &amp; rotating equipment protection relay grading</li><li>Provide comprehensive support and expertise in technical studies for Rotating Equipment, and all associated components, including proficiency in Process and Instrument Diagram reviews, Safety Integrity Level (SIL) assessments, and HAZOP analyses.</li><li>Well-versed in international codes, standards, and practices for oil and gas EPC projects.</li><li>Oversee troubleshooting for all rotating equipment process incidents that may impact plant reliability and availability, utilising appropriate methodologies such as Root Cause Analysis (RCA) and Tripod as required.</li><li>Ensure complete as built, spares, O&amp;M manuals, training, and warranty plans.</li><li>Achieve performance tests and reliability run per contract, support RAM targets.</li></ul><p><strong>Strategic Planning of Departmental activities:</strong></p><ul><li>Establishes and applies best practices within their area of expertise, leading teams through complex investigations and offering innovative, expert guidance in Rotating Equipment Engineering to effectively address technical issues encountered during maintenance and project execution.</li><li>Define rotating equipment execution strategy, contracting model, and phasing; align with project execution plan (PEP) and governance.</li><li>Establish design basis, standards, and assurance gates for the rotating equipment scope.</li><li>Chair rotating equipment risk reviews, design reviews (rotating equipment), and rotating equipment readiness reviews (MC/Pre Comm/Comm/OR).</li><li>Accountable for ensuring the technical quality of every aspect of Rotating Equipment Engineering projects, including developing and upholding assurance processes across procedures, organizational structure, other business units, staff, and corporate functions to effectively identify, monitor, and manage risks within the relevant business scope.</li><li>Accountable for establishing and sustaining discipline engineering assurance functions, offering advanced specialist technical expertise to support other departments.</li><li>Accountable for developing and implementing the long-term strategic plan for engineering discipline activities within the Asset Reference Plan, ensuring alignment with production, maintenance, and project objectives to achieve effective delivery.</li></ul><p><strong>Stakeholder Management:</strong></p><ul><li>Serve as the primary senior company interface for the client on all rotating equipment matters.</li><li>Manage strategic relationships with joint venture partners, key vendors, and regulatory bodies.</li><li>Experience to manage CONTRACTORS &amp; Project deliverables for owner is distinctly preferred.</li><li>Negotiate settlement of major claims and variations related to rotating equipment scope.</li><li>Builds and sustains productive partnerships with a diverse range of stakeholders such as area maintenance managers, turnaround managers, project managers, and senior leadership.</li><li>This position requires dynamic involvement in several workgroups simultaneously, ensuring information is shared effectively throughout the organization.</li><li>Foster technical innovation and ongoing improvement by seeking new developments, deploying opportunities, and engaging with leadership in line with OLNG s core values and policies.</li><li>Accountable for fostering and sustaining organisational alignment to achieve business objectives within the relevant discipline, while ensuring overall consistency with corporate goals.</li></ul><p><strong>Management of Engineering Contracts:</strong></p><ul><li>Establish technical requisition requirements and evaluation criteria; provide leadership in Technical Bid Evaluation (TBE) and vendor selection for Rotating Equipment.</li><li>Manage rotating equipment change orders, claims avoidance/defence, and commercial exposure for rotating equipment packages.</li><li>Initiate new contracts for Major Rotating Equipment Maintenance &amp; Projects and carry out technical evaluation.</li><li>Responsible for planning major engineering contracts from the beginning, including developing contract strategies, evaluating and choosing contractors.</li><li>Also ensures that significant contracts are delivered on time, within budget, and in compliance with safety, quality, and contractual requirements.</li></ul><p><strong>Quality Assurance:</strong></p><ul><li>Drive zero harm culture; ensure compliance with rotating equipment safety standards (e.g. DEP, where applicable).</li><li>Ensure design and construction adhere to applicable codes, environmental and regulatory permits.</li><li>Own rotating equipment QA/QC plan, ITPs, and non conformance management.</li><li>Accountable that all the rotating equipment discipline procedures within an ISO certified quality assurance system.</li><li>Accountable in setting the requirement of regular rotating equipment spare parts.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>BSc in Mechanical Engineering or Equivalent. Minimum of 12 years relevant oil and gas industry experience with 8 10+ years in large industrial/ O&amp;G projects with LNG experience 5+ years in leadership of multi disciplinary rotating equipment teams; track record of first time right energization. Technical Authority Level 2 (TA-2) Minimum 4+ years of experience in troubleshooting, analysis of Rotating Equipment Technical Authority Level3 Demonstrated experience in the execution, engineering, construction, commissioning, or management of major industrial projects, preferably within the Oil &amp; Gas, LNG, or energy sector</p>