Heavy equipment mechanical engineer Jobs

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced Telecom Lead Engineer to lead and manage telecommunications activities during the pre-commissioning and commissioning phases of a large-scale industrial facility. The role will involve overseeing telecom systems installation completion, testing, integration, and handover to operations, ensuring full compliance with project specifications, international standards, and safety requirements.</p> <p>The successful candidate will act as the technical authority for telecom discipline activities on site, coordinating closely with engineering, construction, commissioning, vendors, and operations teams.</p> <h4>Key responsibilities</h4> <strong>Engineering & technical leadership</strong><br> <ul> <li>Lead all telecommunications scope during pre-commissioning and commissioning phases</li> <li>Review and validate telecom engineering deliverables, including: <ul> <li>Network architecture and system layouts</li> <li>Telecom block diagrams and schematics</li> <li>Fiber optic, structured cabling, and routing drawings</li> </ul> </li> <li>Ensure systems are installed, tested, and commissioned in line with: <ul> <li>Project specifications</li> <li>Approved drawings and procedures</li> <li>Applicable international standards (IEC, ITU-T, ISO, IEEE)</li> </ul> </li> </ul> <strong>Systems scope</strong><br> <p>Responsible for the following systems, including integration and interface management:</p> <ul> <li>Telecom network infrastructure (LAN/WAN, IP/MPLS where applicable)</li> <li>Fiber optic and copper cabling systems</li> <li>Telephone systems (PABX/IP telephony)</li> <li>CCTV and video surveillance systems</li> <li>Access control and security systems</li> <li>Public address & general alarm (PAGA) systems</li> <li>Radio systems (TETRA/UHF/VHF, where applicable)</li> <li>Data and server room equipment (racks, switches, UPS interfaces)</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Develop and review: <ul> <li>Pre-commissioning check sheets</li> <li>Commissioning procedures and test scripts</li> </ul> </li> <li>Lead telecom system testing activities such as: <ul> <li>Point-to-point testing</li> <li>Loop checks</li> <li>Network performance and redundancy tests</li> <li>System integration tests</li> </ul> </li> <li>Coordinate vendor attendance and factory acceptance/site acceptance testing (FAT/SAT) support</li> <li>Monitor commissioning progress and proactively resolve technical issues</li> </ul> <strong>Site coordination & management</strong><br> <ul> <li>Act as single point of contact for telecom discipline on site</li> <li>Coordinate daily activities with: <ul> <li>Construction teams</li> <li>Commissioning teams</li> <li>Other engineering disciplines</li> <li>Client/operations representatives</li> </ul> </li> <li>Manage and support telecom engineers and technicians on site</li> <li>Participate in site walkdowns, punch listing, and system handover activities</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure compliance with: <ul> <li>Project HSE requirements</li> <li>Company quality standards</li> <li>Telecommunications industry best practices</li> </ul> </li> <li>Support preparation of telecom dossiers, test records, and handover documentation</li> <li>Close out punch items and support final system acceptance</li> </ul> <strong>Interface & reporting</strong><br> <ul> <li>Report to the Commissioning Manager/Engineering Manager</li> <li>Interface closely with: <ul> <li>Electrical, Instrumentation, and Automation teams</li> <li>IT/cybersecurity stakeholders (if applicable)</li> <li>Vendors and system integrators</li> </ul> </li> </ul> <h4>Requirements</h4> <ul> <li>Bachelor’s degree in: <ul> <li>Telecommunications Engineering</li> <li>Electrical/Electronics Engineering</li> <li>Or related discipline</li> </ul> </li> <li>Relevant professional certifications (but not mandatory)</li> <li>Minimum 10-15 years of experience in telecommunications engineering</li> <li>Proven experience as Telecom Lead Engineer on large industrial projects, preferably: <ul> <li>Oil & Gas</li> <li>LNG</li> <li>Petrochemical</li> <li>Power or heavy industrial facilities</li> </ul> </li> <li>Strong hands-on experience in pre-commissioning and commissioning phases</li> <li>Prior site-based project experience in the Middle East is highly desirable</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Instrumentation Asset Data &amp; SAP PM Engineer is responsible for ensuring the accuracy, completeness, and integrity of instrumentation asset data, conducting equipment criticality assessments, and maintaining asset master data within SAP Plant Maintenance (PM). The role supports maintenance reliability, asset performance, and operational excellence by standardizing equipment information and ensuring compliance with engineering and maintenance standards.</p><br><ul><li><p>Review instrumentation records to identify missing, inaccurate, or incomplete equipment data.</p></li><li><p>Verify equipment information using P&amp;IDs, loop diagrams, instrument index, datasheets, and asset registers.</p></li><li><p>Coordinate with Engineering, Maintenance, and Operations teams to collect and validate equipment information.</p></li><li><p>Prepare and standardize equipment datasheets for pressure, temperature, flow, level, analyzers, control valves, and other instrumentation assets.</p></li><li><p>Update technical specifications, operating ranges, calibration details, and equipment parameters while ensuring document accuracy and revision control.</p></li><li><p>Perform equipment criticality assessments based on safety, environmental, production, and reliability impacts.</p></li><li><p>Classify instrumentation assets according to operational risk and support the development of preventive and predictive maintenance strategies.</p></li><li><p>Create, update, and maintain SAP PM master data, including Equipment Masters, Functional Locations, Classification, and Maintenance Plans.</p></li><li><p>Ensure proper asset hierarchy, coding standards, and data quality within SAP.</p></li><li><p>Support asset management initiatives by maintaining accurate equipment records and improving master data quality.</p></li><li><p>Ensure compliance with company engineering standards, maintenance procedures, and HSE requirements.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's Degree in Instrumentation Engineering or a related Engineering discipline.</p></li><li><p>Minimum <strong>5 years</strong> of experience in instrumentation maintenance, reliability, or asset management within industrial environments.</p></li><li><p>Hands-on experience with <strong>SAP Plant Maintenance (SAP PM)</strong>, including Equipment Master Data and Functional Locations.</p></li><li><p>Strong knowledge of industrial instrumentation, calibration, P&amp;IDs, loop diagrams, and engineering documentation.</p></li><li><p>Experience in equipment criticality assessment and maintenance planning is preferred.</p></li><li><p>Proficient in Microsoft Office applications, particularly Excel.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced and results-driven <strong>HVAC Sales Engineer</strong> to join our growing team in <strong>Oman</strong>. The ideal candidate will have a strong background in HVAC project sales and business development, with proven experience selling Air Conditioning systems including <strong>Split AC, Ducted AC, Window AC, VRF/VRV systems</strong>, and related MEP solutions within the <strong>Oman/GCC market</strong>.</p><p>This role requires a proactive sales professional who can identify project opportunities, build strong relationships with contractors, consultants, developers, and end-users, and drive sustainable revenue growth.</p><p>Key Responsibilities</p><ul><li><p>Drive sales of Split AC, Window AC, Ducted AC Systems, VRF/VRV Systems, and associated MEP products for projects.</p></li><li><p>Generate new business through market visits, client meetings, networking, and business development activities.</p></li><li><p>Identify potential accounts and develop relationships with MEP contractors, consultants, developers, and project clients.</p></li><li><p>Promote and sell HVAC products along with related MEP solutions based on customer and project requirements.</p></li><li><p>Manage project sales opportunities and actively follow up on leads to achieve monthly and annual sales targets.</p></li><li><p>Build and maintain strong customer relationships to support long-term business growth.</p></li><li><p>Monitor market trends, competitor activities, and emerging project opportunities.</p></li><li><p>Coordinate with engineering, estimation, and project teams to ensure successful project execution and customer satisfaction.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum <strong>2-3 years of Oman/GCC experience</strong> in HVAC/AC project sales.</p></li><li><p>Strong experience in selling <strong>Split AC, Window AC, Ducted AC, and VRF/VRV Systems</strong>.</p></li><li><p>Previous experience working with reputed HVAC/AC brands is highly preferred.</p></li><li><p>Engineering background preferred.</p></li><li><p>Proven track record in business development, project sales, and customer relationship management.</p></li><li><p>Strong network with MEP contractors, consultants, developers, and project owners in Oman is an advantage.</p></li><li><p>Excellent communication, negotiation, and presentation skills.</p></li><li><p>Ability to work independently and drive sales growth.</p></li><li><p>Valid Oman Driving License is preferred.</p></li></ul><p>Preferred Qualifications</p><ul><li><p>Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related engineering field.</p></li><li><p>Experience in project sales of HVAC/AC equipment within the <strong>Oman market</strong>.</p></li><li><p>Familiarity with <strong>Oman Building Code</strong>, local MEP standards, and HVAC installation practices.</p></li><li><p>Knowledge of project cost estimation, BOQ analysis, tendering, and contract documentation.</p></li><li><p>Experience using CRM software and preparing technical and commercial proposals.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Purpose</p><p>The Technical Maintenance Officer is responsible for supporting preventive and corrective maintenance activities to ensure the proper functioning of equipment, machinery, and facility systems. The role involves assisting in troubleshooting, repairs, inspections, and maintaining operational efficiency.</p><p>Key Responsibilities</p><ul><li>Perform routine maintenance and inspection of equipment and facility systems.</li><li>Assist in troubleshooting mechanical and electrical faults.</li><li>Carry out preventive maintenance tasks as per schedule.</li><li>Support repair and replacement of faulty components.</li><li>Ensure equipment is operating safely and efficiently.</li><li>Report technical issues and maintenance requirements to supervisors.</li><li>Maintain maintenance logs and service records.</li><li>Follow safety procedures and use PPE at all times.</li><li>Assist senior technicians and engineers in maintenance activities.</li><li>Ensure tools and equipment are properly used and maintained.</li></ul><p>Working Conditions</p><ul><li>Site-based and technical work environment.</li><li>May involve physical work and field operations.</li><li>Standard working hours with possible shift work depending on operations.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Job Details</h2><p>Number of Vacancies: 41 Positions</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><h2>Qualifications</h2><h3>Diploma only in Mechanical Engineering, Electrical Engineering, or a related technical field.</h3><h3>Experience</h3><p>Practical Experience: 0 years (Fresh graduates are welcome to apply.)</p><h3>Technical Skills</h3><ul><li>Basic understanding of mechanical or electrical systems.</li><li>Ability to use basic tools and maintenance equipment.</li><li>Knowledge of safety procedures in technical environments.</li><li>Basic ability to read technical manuals and instructions.</li><li>Basic knowledge of Microsoft Office (Word, Excel).</li></ul><h3>Soft Skills</h3><ul><li>Strong problem-solving skills.</li><li>Attention to detail and accuracy.</li><li>Ability to work in a team environment.</li><li>Willingness to learn and develop technical skills.</li><li>Good communication and reporting skills.</li><li>Ability to work in field and operational environments.</li></ul><p>Application Note :</p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> We are looking for an experienced Maintenance Engineer to support maintenance operations and ensure smooth functioning of plant equipment and utilities in a fertilizer or petrochemical environment. The ideal candidate should possess strong expertise in mechanical maintenance along with exposure to desalination and utility systems.</p> <br> <p> <strong>Key Responsibilities</strong> </p> <ul> <li>Supervise and guide the technicians team to ensure reliable and uninterrupted plant operations. </li> <li>Prepare and implement preventive maintenance schedules for plant equipment and utility systems. </li> <li>Develop predictive maintenance plans to improve equipment reliability and reduce downtime. </li> <li>Coordinate with vendors and suppliers for procurement and timely availability of maintenance materials and spares. </li> <li>Support the Head Maintenance &amp; Mechanical in daily maintenance and operational activities. </li> <li>Monitor equipment performance and recommend improvements for operational efficiency. </li> <li>Ensure adherence to safety standards, maintenance procedures, and statutory compliance. </li> <li>Maintain maintenance records and documentation through CMMS systems.</li> </ul> <br> <p> <strong>Candidate Profile</strong> </p> <ul> <li>Strong knowledge of mechanical maintenance in continuous process industries. </li> <li>Hands-on experience in troubleshooting and maintenance planning. </li> <li>Good leadership, coordination, and problem-solving skills. </li> <li>Ability to work effectively in a multicultural industrial environment. </li> </ul> <br> <p> <strong>Experience Required</strong> </p> <ul> <li>9-12 years of experience in Maintenance Management within Fertilizer, Petrochemical, or similar process industries. </li> <li>Bachelors Degree in Mechanical Engineering. </li> <li>Knowledge of rotating and static equipment maintenance. </li> <li>Understanding of utility systems and plant reliability practices. </li> <li>Familiarity with shutdown planning and maintenance optimization techniques.</li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><p>To inspect, maintain, and repair heavy equipment and trucks to ensure safe, reliable, and uninterrupted operations at landfill and transfer station sites. The role covers daily inspections, preventive and predictive maintenance, major repairs, breakdown response, and support for CMMS-based maintenance workflow.</p><p>Key Responsibilities</p><ul><li><p>Conduct daily routine checks of all assigned equipment and trucks, including visual inspection, fluid levels, leaks, and functional operation.</p></li><li><p>Perform weekly inspections and report abnormalities for corrective action.</p></li><li><p>Carry out preventive maintenance (PM), predictive maintenance, and major maintenance work on heavy equipment and trucks as per OEM and site schedules.</p></li><li><p>Perform maintenance, troubleshooting, and repair of heavy equipment, including:</p></li><li><p>Excavators, Dozers, Compactors, Track Loaders</p></li><li><p>Backhoe Loaders, Wheel Loaders</p></li><li><p>Material Handler with Grappler &amp; Cutting Tool</p></li><li><p>Diesel Generators (CAT &amp; Perkins)</p></li><li><p>Carry out maintenance and repair of heavy trucks and trailers, including:</p></li><li><p>Forklifts, Skid Steer Loaders (Bobcat)</p></li><li><p>Wood Shredder Machine</p></li><li><p>Diesel Generators (CAT &amp; Perkins)</p></li><li><p>Carry out maintenance and repair of heavy trucks and trailers, including:</p></li><li><p>Hooklift Trucks, Prime Movers, Waste Compactor Trailers</p></li><li><p>Truck brands: Scania, MAN, Astra, Renault</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p> ITI / Diploma in Mechanical or equivalent</p><ul><li><p>Minimum 10 years GCC experience in heavy equipment and truck maintenance</p></li><li><p>Strong experience in CAT or equivalent heavy equipment</p></li><li><p>Experience with Scania, MAN, Astra, and Renault trucks preferred</p></li><li><p>Good knowledge of hydraulic systems, diesel engines, and drivetrains</p></li><li><p>Welding and fabrication experience preferred</p></li><li><p>Ability to work independently, handle emergency breakdowns, and shift duties</p></li><li><p>Preferred age: 30-45 years</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Provide detailed engineering input during all design phases, including interpretation and challenge of standards. Actively communicate with other disciplines to optimise areas of interface, during the design development, review and check processes. </p></li><li><p>Support design/drawing office personnel with specialist engineering input. </p></li><li><p>Prepare requisitions and technical evaluation of bids for discipline material and equipment sourcing. </p></li><li><p>Ensure equipment Vendors provide timely and quality input into design packages. Review all third-party discipline design work. </p></li><li><p>Ensure design packages meet the relevant safety, environmental and ergonomic standards.</p></li><li><p>Understand the contract quality management system and ensure these requirements are met.</p></li><li><p>Participate in and sometimes lead, discipline design reviews. </p></li><li><p>Conversant with relevant international standards. </p></li><li><p>Experience with Company and/or Shell Group projects and standards (SPs) is strongly preferred.</p></li><li><p>Field experience in construction &amp; commissioning strongly preferred.</p></li><li><p>Experience with Company and/or Shell Group projects and standards (SPs) is strongly preferred</p></li><li><p>Responsible for all day to day activities supporting build program planning and delivery; identifying key issues, constraints &amp; critical path; setting and achieving key milestones; issuing various reports</p></li><li><p>Execute technical support studies as requested.</p></li><li><p>Provide engineering support to Construction and operations as requested.</p></li></ul><p><br></p><p><strong>Other tasks:</strong></p><ol type="1"><li><p>Promoting Group Values, Code of Conduct and associated policies</p></li><li><p>Participating and providing positive contribution to technical, commercial, planning, safety and quality performance of the organization and in accordance with Client, Contractual, regulatory requirements</p></li><li><p>Undertaking any other responsibilities as directed and mutually agreed with the Line Management.</p><p><br></p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Mechanical or Civil engineering discipline.</p></li><li><p>For Engineers, a minimum 8 years oil &amp; gas engineering experience</p></li><li><p>Must be PC literate.</p></li><li><p>Shall demonstrate sound general management skills in all aspects of the work, be extremely well organised, methodical.</p></li><li><p>Good interpersonal &amp; communication skills and an extrovert. </p></li><li><p>Shall be able to form, smoothly interact and motivate a team within a matrix type organisation.</p></li></ul><p><br><br></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Purpose</p><p>The CMMS Engineer is responsible for managing, developing, and optimizing the Computerized Maintenance Management System (CMMS) to support effective maintenance planning, asset management, work order control, and equipment reliability across the organization.</p><p>Key Responsibilities</p><ul><li>Administer and maintain the CMMS platform to ensure accurate and efficient maintenance operations.</li><li>Create, update, and manage equipment master data, asset registers, and maintenance plans.</li><li>Generate and manage work orders, preventive maintenance schedules, and maintenance notifications.</li><li>Monitor maintenance activities and ensure timely completion of work orders.</li><li>Analyze maintenance data to identify trends, failures, and improvement opportunities.</li><li>Develop KPIs, dashboards, and performance reports related to maintenance activities.</li><li>Support maintenance planning and scheduling with operations and maintenance teams.</li><li>Ensure data accuracy, integrity, and consistency within the CMMS system.</li><li>Assist in system upgrades, configuration, testing, and implementation of improvements.</li><li>Provide training and technical support to CMMS users.</li><li>Coordinate with engineering, procurement, and maintenance teams for effective asset management.</li><li>Ensure compliance with company maintenance standards and asset management best practices.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications</strong></p><p>Bachelor s Degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, Computer Engineering, Information Technology, or related field.</p><p><strong>Experience</strong></p><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic exposure in maintenance systems or asset management is an advantage.</p><p><strong>Technical Skills</strong></p><ul><li>Basic knowledge of CMMS/EAM systems and maintenance workflows.</li><li>Understanding of preventive and corrective maintenance concepts.</li><li>Familiarity with data analysis and reporting tools.</li><li>Basic knowledge of asset management principles.</li><li>Awareness of industrial maintenance operations and equipment lifecycle.</li><li>Proficiency in Microsoft Excel and reporting tools.</li></ul><p><strong>Soft Skills</strong></p><ul><li>Strong willingness to learn and develop technical skills.</li><li>Good analytical and problem-solving abilities.</li><li>Strong attention to detail and data accuracy.</li><li>Good communication and teamwork skills.</li><li>Ability to manage tasks under supervision and meet deadlines.</li></ul><p><strong>Working Conditions</strong></p><p>Office-based with occasional site visits. May require support during maintenance shutdowns or system updates.</p><p><strong>Application Note</strong> :</p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br> <b>Job Duties</b> <br>Under direct supervision, the Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management. Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.<br><br><b>Qualifications</b> <br><br><br><p><b>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</b>.</p><br> <p><b><u>Location</u></b></p><br> <p>Str 2316, Bdg 65, Assarain Bdg,&nbsp;Muscat,&nbsp;Muscat,&nbsp;, Oman</p><br> <p><b><u>Job Details</u></b></p><br> <p><b>Requisition Number:</b>&nbsp;209925&nbsp;&nbsp;<br> <b>Experience Level:&nbsp;</b>Experienced Hire&nbsp;<br> <b>Job Family:</b>&nbsp;Engineering/Science/Technology&nbsp;<br> <b>Product Service Line:&nbsp;</b>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br> <b>Full Time / Part Time:&nbsp;</b>Full Time</p><br> <p><b>Additional Locations for this position:&nbsp;</b></p><br> <p><u><b>Compensation Information</b></u><br> Compensation is competitive and commensurate with experience.</p><br> </div>

<p><strong>Maintenance Management</strong> Executes work order through CMMS (SAP) and coordinates with maintenance engineer for job completion and technical matters. Apply technical craft, techniques, processes and principles and be responsible for all necessary preparation required to carry out mechanical maintenance to equipment/area assigned to him. Report to Maintenance Manager for daily activities spare parts and consumables in the department to update spares availability to cope up with the maintenance requirements. Ensure Environmental Aspect-Impact and Hazard Risk Assessment are carried out, controlled and updated. Implement, monitor and report IMS objectives, Targets and programs. Provide necessary resources for effective implementation and sustenance of IMS. Report IMS performance to the management periodically. Ensure Legal compliance with respect to their scope of activities. Responsible to ensure the compliance to legal requirements, contractual and organizational requirements. Report deviations in Integrated Management System &amp; identify root cause and implement corrective and preventive actions. Ensure aspects identified are monitored and operational controls are followed.</p><p><strong>Health, Safely, Security &amp; Environment</strong> Ensure strict adherence to all relevant HSSE and permit to work system, instructions and controls and procedures are complied with so that the safety of employees and environmental compliance can be guaranteed. Together with HSE department, ensure that safety rules and regulations are fully explained to plant employees / contractor staff and appropriate safety and protective equipment is worn; safety notices are prominently displayed in all work areas and that all accidents and incidents are efficiently investigated and analyzed whilst ensuring that measures are implemented to avoid any recurrence</p><p><strong>Budgets</strong> Responsible for the Preparation of section budget Responsible for the control and monitoring of all maintenance related costs of the section</p><p><strong>Material Management</strong> To prepare purchase requisitions for spare parts and consumables ensuring budgetary constraints and arrange strategic spares availability to cope up with the maintenance requirements.</p><p><strong>Troubleshooting and Technical Guidance</strong> Acquires considerable knowledge of the process and the relevant systems throughout the plant and applies the same to troubleshoot problems and leads the maintenance team in resolving the issues. To performs routine, corrective and preventive maintenance of plant equipment, cleaning of machines related to electrical section. Ensure identification of root cause for the identified non conformances/ deviations and to implement corrective actions/Preventive actions.</p><p><strong>People Management</strong> Identify the competency gap for their subordinate personnel and implement necessary actions. Carry out annual performance evaluation of reporting employees. Provide on-the-job training to new employees and evaluate their OJT Performance. Effective resource utilization. Perform other duties as assigned.</p><p>5. COMMUNICATION &amp; WORKING RELATIONSHIPS:</p><p>Internal: Needs to work closely with O&amp;M Managers, Electrical Technicians, Operations Team.</p><p>External: Work closely with contractors and vendors</p><p><strong>Desired Candidate Profile</strong></p>6. QUALIFICATIONS, EXPERIENCE, &amp; SKILLS:<br>Bachelor of Engineering<br>10 to 12 Years related experience and training or equivalent combination of education and experience<br>Awareness of Quality, Occupational Health &amp; Safety and Environment Management system principles<br>Knowledge of applicable legal requirements<br>Hazard Risk assessment<br>Aspect Impact assessment<br>Investigating skills<br>Knowledge of spillage containment<br>Knowledge of managing HSE emergencies<br>Knowledge of identification, classification and disposal of waste<br>Knowledge of Emission Monitoring<br>Be able to lead the maintenance group.<br>Excellent communication skills in English Language<br>Computer literate. Able to use MS Outlook for correspondence.<br>Be able to use SAP as end user.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Deliver pipeline engineering design across Project Delivery under the Mechanical Engineering Manager, covering Concept, Pre-FEED, FEED, Detailed Design, and EPC phases for cross-country and in-plant pipeline systems. The role ensures safe, optimized, and fit-for-purpose designs in full compliance with OQEP standards, asset requirements, and international codes.</p><p>Act as the technical authority for pipeline engineering, ensuring technical integrity of all deliverables and providing expert input to key design decisions across the project lifecycle. The position supports complex pipeline systems, including large-diameter and long-distance networks and interfaces closely with Field Urban planning, Projects, procurement, construction, commissioning, operation and integrity teams to ensure design intent is maintained through to project closeout.</p><p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><ul><li>Execute pipeline engineering design across Concept, Pre-FEED, FEED, Detailed Design, and EPC phases, ensuring alignment with project scope, schedule, and technical requirements.</li><li>Lead and coordinate pipeline engineering activities, ensuring timely and high-quality delivery of all design outputs.</li><li>Act as technical authority in pipeline engineering, providing guidance on design decisions, standards application, and resolving complex technical issues.</li><li>Ensure the engineering deliverables generated by Contractor meet project requirement in term of technical content and follow project procedures such as engineering plan, quality plan, document numbering, level of approval,</li><li>Develop and review key deliverables including pipeline layouts, plot plans, GA drawings, alignment sheets, isometrics, hydrotest diagrams, HDD profiles, crossing drawings, and station approach drawings.</li><li>Prepare and review Pipeline Design Basis, Stress Analysis Philosophy, stress analysis report, route selection reports and all related design calculations including wall thickness, Road crossing and upheaval buckling calculations.</li><li>Perform and review pipeline routing, alignment optimization, and feasibility studies including constructability and cost considerations.</li><li>Ensure compliance with Company design specifications, international design codes and standards including ASME B31.4, B31.8, B31.3, API, ISO, ASTM standards, and other applicable codes.</li><li>Design and review pipelines across various materials including Carbon Steel (CS), DSS, GRE, HDPE, PE-lined systems, and LLRTP.</li><li>Prepare material specifications, datasheets, RFQs, and support technical bid evaluations (TBE) and vendor document reviews (VDR) for all pipeline and piping items</li><li>Review and Develop construction specifications, scope of work for pipeline Engineering, route surveys, and interfaces</li><li>Coordinate with vendors, and multidisciplinary teams to ensure design compliance and alignment with project requirements.</li><li>Analyze pipeline engineering deliverables and actively participate in design reviews, HAZOPs, and technical workshops.</li><li>Identify and resolve technical challenges during FEED and detailed design, including urban planning studies and system modifications/upgrades.</li><li>Support end-to-end project execution including design engineering, resource planning, cost estimation, and activity Phasing.</li><li>Support urban planning, projects, procurement, construction, commissioning, operation and intergrity teams by providing technical clarifications and resolving site queries.</li><li>Conduct or support site visits, inspections, and mechanical walk-downs to ensure design accuracy and implementation compliance.</li><li>Identify gaps in standards, tools, and practices, and contribute to continuous improvement initiatives.</li><li>Ensure adherence to QHSE requirements and promote a strong safety culture across all engineering activities.</li><li>Report safety concerns or deviations and ensure compliance with company procedures.</li><li>Mentor and develop junior pipeline engineers by providing technical guidance, reviewing their work, and supporting their progression in design practices, standards, and tools.</li><li>Perform other related duties as required.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Projects, Operation, Integrity</li><li>External: Consultants, Contractors, Vendors</li></ul><p><strong>Notable Working Conditions.</strong> office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>The minimum qualification is a Bachelor s degree in Mechanical Engineering, or related.</p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p>Lead Engineer Bachelor 8+ years of relevant experience</p><p>Both:</p><p>Pipeline experience in similar projects is mandatory.</p><p>Pipeline offshore experience is favorable.</p><p>On plot piping experience is favorable.</p><p>Soft:</p><p>To work collaboratively with all involved.</p><p>Adaptable and motivated general management strategist who relishes challenges</p><p>Excellent interpersonal skills and multi-cultural sensitivity.</p><p>Technical:</p><p>Computer literate with expertise in MS Office.</p><p>Experienced in resource control, contract management and general management.</p><p>AutoCad, Naviswork</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>MEP MAINTENANCE ENGINEER</p><p>Coordinate technicians and contractors for planned and reactive maintenance Supervisor.</p><p>Understanding of SLAs, KPIs, and asset lifecycle management</p><p>Review and ensure implementation of preventive maintenance schedules.</p><p>Monitor system performance using BMS and CMMS platforms.</p><p>Serve as the primary technical liaison between the facilities management team and the clients representatives Attend regular meetings with the client to discuss maintenance activities, ongoing issues, and upcoming projects.</p><p>Provide timely and clear updates, technical reports, and recommendations to the client.</p><p>Ensure client satisfaction by promptly addressing concerns and coordinating effective solutions.</p><p>Conduct site inspections, issue technical reports, CAPA , HSE Reports and ensure safety compliance and well versed with FM Industry standards</p><p>INSTRUMENTATION ENGINEER esign, install, test, and commission instrumentation and control systems for industrial projects.</p><p>Develop and review instrumentation drawings, P&amp;IDs, loop diagrams, hook-up drawings, and cable schedules.</p><p>Select and specify field instruments such as pressure, temperature, flow, and level transmitters.</p><p>Install, calibrate, troubleshoot, and maintain instrumentation equipment.</p><p>Configure and maintain PLC, DCS, SCADA, and control systems.</p><p>Perform preventive, corrective, and predictive maintenance of instrumentation systems.</p><p>Conduct loop checking, functional testing, FAT, SAT, and commissioning activities.</p><p>Diagnose and resolve instrumentation and control system faults to minimize downtime.</p><p>Ensure all instrumentation complies with project specifications, industry standards, and safety regulations.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Proficiency in <strong>SAP PM</strong> for maintenance planning and work order management.</p></li><li><p>Knowledge of <strong>Primavera P6 and MS Project</strong> for planning and scheduling activities.</p></li><li><p>Strong understanding of <strong>preventive and corrective maintenance planning</strong>.</p></li><li><p>Experience in <strong>shutdown and turnaround planning,</strong> scheduling, and execution.</p></li><li><p>Ability to read and interpret technical drawings and documents including P&amp;IDs, electrical drawings, loop diagrams, mechanical drawings, GA drawings, isometrics, equipment cross-sectional drawings, and related engineering documents.</p></li><li><p><strong>Good knowledge of rotating equipment, static equipment, piping systems, electrical systems, instrumentation systems, control valves, analyzers, calibration, and loop checking activities, as applicable to the discipline.</strong></p></li><li><p>Strong coordination, communication, organizational, and problem-solving skills.</p></li><li><p>Good understanding of HSE standards, permit-to-work systems, and E-permit procedures.</p></li><li><p>Ability to work effectively under pressure and <strong>meet tight shutdown/turnaround schedules</strong>.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Bachelor’s or Diploma in Mechanical, Electrical, Instrumentation, Electronics Engineering,</strong> or a related discipline. Minimum 5 years of experience in <strong>maintenance planning within Oil &amp; Gas, Refinery, Petrochemical, LNG, Power</strong>, or other large industrial plants. <strong>Minimum 3 years of turnaround/shutdown planning experience is preferred.</strong></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <p> </p> <div> <strong>POSITION DESCRIPTION:</strong> <strong>Position Title:</strong> Mechanical Supervisor<br><strong>Reports to:</strong> Mechanical Lead<br><strong>Department:</strong> Maintenance Department<br><strong>Location:</strong> All OTTCO Terminals<br></div> <p> </p> <div> <strong>JOB PURPOSE:</strong> <p>Perform operations and maintenance of all mechanical systems and equipment across OTTCO s terminals, including pumps, compressors, valves, pipelines, tanks, and other static and rotating machinery. Ensure all mechanical maintenance and inspection activities are carried out efficiently, safely, and in accordance with approved company procedures, industry standards, and OEM recommendations to achieve maximum equipment reliability and asset integrity.</p> <p>The position will operate in alignment with OTTCO s Mission, Vision, Values, and Strategies, ensuring adherence to company policies, HSE regulations, and applicable Omani legal and environmental requirements. The incumbent shall promote operational excellence, continuous improvement, and sustainability through the application of best international practices supported by modern maintenance systems and technologies.</p> </div> <p> <strong> </strong> </p> <div><br> </div> <p> <strong> </strong> </p> <div> <strong>KEY RESPONSIBILITIES:</strong> <p> <strong>Operation &amp; Maintenance</strong> </p> <p> <span> <span> </span> </span>Perform preventive, corrective, and predictive maintenance of mechanical systems including pumps, compressors, tanks, valves, pipelines, and associated static/rotating equipment.</p> <p> <span> <span> </span> </span>Supervise all mechanical maintenance and repair activities to ensure they are conducted safely and in line with approved procedures, work instructions, and OEM standards.</p> <p> <span> <span> </span> </span>Lead and support troubleshooting of mechanical faults and equipment breakdowns, ensuring timely restoration and minimal production impact.</p> <p> <span> <span> </span> </span>Validate and enter all mechanical maintenance activities into the CMMS (SAP/Maximo or equivalent) and ensure proper record keeping.</p> <p> <span> <span> </span> </span>Conduct periodic inspections of mechanical facilities to identify issues, deterioration, or nonconformities requiring intervention.</p> <p> <span> <span> </span> </span>Supervise and certify equipment alignment, vibration analysis, balancing, and other critical maintenance activities. Coordinate with Operations for equipment isolation, handover, and recommissioning to ensure safe execution of maintenance work.</p> <p> <span> <span> </span> </span>Attend Daily operation-maintenance coordination meeting, YTT, and other departmental meetings.</p> <p> <span> <span> </span> </span>Participate and support in root cause analysis (RCA) for major equipment failures and implement corrective and preventive actions to avoid recurrence.</p> <p> <span> <span> </span> </span>Participate in shutdown/turnaround planning and execution, ensuring all mechanical activities are completed safely, on time, and within budget.</p> <p> <span> <span> </span> </span>Closely monitor and verify that all work order closures are completed to a high standard, with clear documentation and all required supporting attachments.</p> <p> <span> <span> </span> </span>Monitor, maintain, and continuously improve departmental KPIs by tracking performance metrics, analyzing trends, and implementing corrective actions to ensure alignment with operational targets and company objectives.</p> <p><br></p> </div> <p> <strong> </strong> </p> <p> </p> <div> <strong>QUALIFICATIONS, EXPERIENCE, &amp; SKILLS: </strong> <p> <span> <span> </span> </span>Bachelor s Degree in Mechanical Engineering or equivalent from a recognized university. </p> <p> <strong>Experience</strong> </p> <p> <span> <span> </span> </span>Minimum +6 years of experience in mechanical maintenance within tank terminal, oil &amp; gas, refinery, or petrochemical sectors.</p> <p> <span> <span> </span> </span>Demonstrated expertise in rotating equipment, mechanical seals, alignment, piping systems, and static equipment (tanks, pressure vessels, exchangers).</p> <p> <span> <span> </span> </span>Proven track record in supervision of EPC and maintenance contractors during shutdowns and major overhauls.</p> <p> <span> <span> </span> </span>Strong exposure to mechanical integrity programs, inspection schedules, and reliability analysis.</p> <p> <span> <span> </span> </span>Working knowledge of international standards such as API 610/650/682, ASME, ASTM, and ISO.</p> <p> <strong>Professional Certifications</strong> </p> <p> <span> <span> </span> </span>Authorized Mechanical/Rotating Equipment Maintenance Certification (where applicable).</p> <p> <span> <span> </span> </span>Training in Root Cause Analysis (RCA), Reliability Centered Maintenance (RCM), or Vibration Analysis is preferred.</p> <p> <span> <span> </span> </span>HSE or PTW certifications such as NEBOSH/IOSH are desirable.</p> <p> <span> <span> </span> </span>Familiarity with SAP or CMMS systems for maintenance management is advantageous.</p> <p> <strong>Technical Competencies</strong> </p> <p> <span> <span> </span> </span>Deep knowledge of pumps, compressors, valves, hydraulic systems, HVAC, and pipeline systems.</p> <p> <span> <span> </span> </span>Proficient in interpreting P&amp;IDs, isometric drawings, and mechanical schematics.</p> <p> <span> <span> </span> </span>Skilled in troubleshooting, root cause analysis, and reliability improvement methodologies.</p> <p> <span> <span> </span> </span>Familiarity with corrosion mechanisms, mechanical integrity inspections, and cathodic protection systems.</p> <p> <span> <span> </span> </span>Capable of planning, scheduling, and managing shutdown and turnaround activities.</p> <p> <strong>Behavioral Competencies</strong> </p> <p> <span> <span> </span> </span>Strong leadership, problem-solving, and decision-making skills.</p> <p> <span> <span> </span> </span>Excellent coordination and communication across multidisciplinary teams.</p> <p> <span> <span> </span> </span>Proactive and detail-oriented, with a strong sense of accountability and ownership.</p> <p> <span> <span> </span> </span>High commitment to HSE culture and continuous improvement.</p> <p> <span> <span> </span> </span>Ability to work effectively under pressure and manage multiple priorities.</p> <p> <span> <span> </span> </span>Demonstrates integrity, professionalism, and alignment with OTTCO s corporate values and strategic vision.</p> </div> <p> <strong> </strong> </p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Supporting the management of the long term (Siemens) gas turbine service contract with respect to planned and unplanned outage services of gas turbines. Development of routine plant maintenance through the use of CMMS. Successful preparations and completion of planned shutdowns conducted by Siemens. Implementation of Mechanical engineering practices in accordance with OEM and international standards. Support the development and implementation of a Long Term engineering strategic plan. Life cycle management for all Mechanical systems. Completing the planned shutdowns within time and budget. Safe and efficient delivery of high levels of commercial availability within environment limits. Make decisions, or assist others to make decisions, to resolve plant maintenance problems with immediate, medium and long term consequences. Lead and motivate the team by setting appropriate people and plant related performance measures. Deliver outcomes, in all areas of work, consistent with the Quality, Health, Safety and Environmental policies. Ensure Company Health, Safety, and Environmental policies and procedures are followed. Participate in internal / external Quality, Health, Safety and Environmental audits and monitor relevant findings. Ensure all procedures, documentation, drawings and manuals are kept up to date and necessary training is completed in a timely manner. Ensure suitable training programs are in place, both for individual development and engineering competence, and develop appropriate succession plans for key staff. Prepare a budget for maintenance and provide regular reports of expenditure, explaining variances, potential risks and/or problems and recommending solutions. Support an environment and mechanism where communication and cooperation between the Maintenance and Operation teams, as well as with Admin Staff, is maintained at excellent levels. Continues improvement in the process of work. Any other tasks that may be required.</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About Company:</b></p><br><br><br><p><span>Our client&nbsp;operates fourteen manufacturing facilities producing power plant equipment and sugar-related products. Its Power Transmission Business, established in Mysore in 1976, specializes in high-speed high-power gearboxes having an installation base of 12000+ gearboxes, spanning over 80+ countries and catering to diverse applications &amp; industry segments.</span></p><br><br><br><br><p><b>An Ideal Candidate:</b></p><br><br><br><p><span>Sr. Engineer SCM will be responsible to manage procurement and supply chain activities for Engineering Goods and projects by sourcing mechanical components, developing vendors, coordinating with internal departments, and ensuring timely availability of quality materials at optimized cost.&nbsp;</span></p><br><br><p><b>Key Competencies:</b></p><br><br><br><p><span>• Procure mechanical components such as forgings, castings, pumps, bearings, motors, control panels, and machined components as per specifications and drawings. </span></p><br><br><p><span>• Identify, evaluate, and develop reliable vendors/suppliers. </span></p><br><br><p><span>• Prepare and issue RFQs (Request for Quotation) to suppliers. </span></p><br><br><p><span>• Negotiate prices, delivery schedules, and payment terms with vendors. </span></p><br><br><p><span>• Generate Purchase Orders and ensure compliance with company procurement policies. </span></p><br><br><p><span>• Coordinate with internal customers i.e engineering, projects, Quality production for project execution. </span></p><br><br><p><span>• Monitor order status and ensure timely delivery of materials. </span></p><br><br><p><span>• Ensure quality standards and compliance with required specifications. </span></p><br><br><p><span>• Identify and mitigate risks related to delivery timelines, quality issues, and supplier performance </span></p><br><br><p><span>• Track cost savings and support cost optimization initiatives. </span></p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Testing &amp; Commissioning Roles &amp; Responsibilities</p><br><p>The T&amp;C engineer is responsible for planning test procedures, coordinating with construction teams, verifying equipment installation, and conducting functional and performance tests. Supervisors assist in site inspections, documentation, and ensuring safety compliance. Technicians execute testing activities, record readings, and report abnormalities. Quality and safety teams ensure adherence to regulations and risk control measures. Proper documentation, reporting, and handover to the client are key responsibilities, ensuring the system is reliable, efficient, and ready for operation.</p><br><p>From Basic Cable schedule preparation, LVAC &amp; LVDC Commissioning, GIS &amp; CRP Interlock, Scheme Tests,</p><br><p>Auxiliary Relay Test, Back up Relay Test &amp; Remote End modification works etc</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> Responsible for all plant equipment maintenance strategies and activities within targeted time frames.</p> <p> Maintenance compliance responsibility covers all disciplines mechanical, electrical, instrumentation &amp; automation.</p> <p> Coordinate operation and maintenance activities to ensure that the plant is operated according to the demand, operation plan and business plan. Efforts to consistently achieve operational targets, contractual obligations &amp; reliability.</p> <p> Ensure all plant equipment is healthy by providing quality maintenance.</p> <p> Inspect completed work to ensure that maintenance completed correctly, and machinery/equipment conform to specifications and safety standards.</p> <p> Implement the SOPs and working routines. Develop the new procedures as and when required.</p> <p> Prioritize and assign tasks so that team resources are used effectively, and that work schedules and targets are met.</p> <p> Monitor condition of the equipment, materials, parts, and tools, ensure those are maintained according to applicable guidelines and policies, take corrective actions when needed.</p> <p> Problem solving &amp; Root cause analysis for all plant equipment.</p> <p> Maintenance Reports.</p> <p> Incidents reporting, analysis, investigations, and action plans implementation.</p> <p> Spares/consumables/tools planning &amp; assist in procurement. Be responsible for effective inventory control/management in the responsible area.</p> <p> Suggest and implement improvements.</p> <p> Ensure that the work is executed meeting all Quality, Health, Safety and Environmental standards/guidelines as per MPC/MIPP &amp; OEM.</p> <p> Provide theoretical and on the job training for subordinates including preparation of training material, structured approach of team development to be applied.</p> <p> Coach and mentor maintenance staff and assist them to diagnose more complex.</p> <p> problems with machinery.</p> <p> Manage warranties &amp; defects.</p> <p> Ensure good housekeeping and clean plants always.</p> <p> Prepared to work in shifts (including night) if required.</p> <p> Audits compliance &amp; action plans implementation.</p> <p> Assist in business plan &amp; budget preparations.</p> <p> Proper Communications with the stakeholders &amp; plant team.</p> <p> Maintaining good teamwork including other department personnel.</p> <p> Ensure compliance with all permits/licenses and legal requirements.</p> <p> Liaise with authorities as and when required.</p> <p> Performing Operations Engineer responsibilities as and when required.</p> <p> Any other responsibilities assigned by superior as per company requirement.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform operations and maintenance of all mechanical systems and equipment across OTTCO s terminals, including pumps, compressors, valves, pipelines, tanks, and other static and rotating machinery. Ensure all mechanical maintenance and inspection activities are carried out efficiently, safely, and in accordance with approved company procedures, industry standards, and OEM recommendations to achieve maximum equipment reliability and asset integrity.</p><p>The position will operate in alignment with OTTCO s Mission, Vision, Values, and Strategies, ensuring adherence to company policies, HSE regulations, and applicable Omani legal and environmental requirements. The incumbent shall promote operational excellence, continuous improvement, and sustainability through the application of best international practices supported by modern maintenance systems and technologies.</p><p><strong>REPORTING STRUCTURE:</strong> Number of Staff Supervised Direct Reports: 0 Total: 0</p><p><strong>KEY RESPONSIBILITIES:</strong></p><p><strong>Operation &amp; Maintenance</strong></p><ul><li>Perform preventive, corrective, and predictive maintenance of mechanical systems including pumps, compressors, tanks, valves, pipelines, and associated static/rotating equipment.</li><li>Supervise all mechanical maintenance and repair activities to ensure they are conducted safely and in line with approved procedures, work instructions, and OEM standards.</li><li>Lead and support troubleshooting of mechanical faults and equipment breakdowns, ensuring timely restoration and minimal production impact.</li><li>Validate and enter all mechanical maintenance activities into the CMMS (SAP/Maximo or equivalent) and ensure proper record keeping.</li><li>Conduct periodic inspections of mechanical facilities to identify issues, deterioration, or nonconformities requiring intervention.</li><li>Supervise and certify equipment alignment, vibration analysis, balancing, and other critical maintenance activities.</li><li>Coordinate with Operations for equipment isolation, handover, and recommissioning to ensure safe execution of maintenance work.</li><li>Attend Daily operation-maintenance coordination meeting, YTT, and other departmental meetings.</li><li>Participate and support in root cause analysis (RCA) for major equipment failures and implement corrective and preventive actions to avoid recurrence.</li><li>Participate in shutdown/turnaround planning and execution, ensuring all mechanical activities are completed safely, on time, and within budget.</li><li>Closely monitor and verify that all work order closures are completed to a high standard, with clear documentation and all required supporting attachments.</li><li>Monitor, maintain, and continuously improve departmental KPIs by tracking performance metrics, analyzing trends, and implementing corrective actions to ensure alignment with operational targets and company objectives.</li></ul><p><strong>Engineering &amp; Project Interface</strong></p><ul><li>Participate in Engineering, Procurement, Construction, Commissioning, and Operational phases of terminal facilities.</li><li>Review and comment on mechanical engineering deliverables, specifications, and construction drawings to ensure alignment with operational needs.</li><li>Collaborate in multi-disciplinary design reviews to improve reliability, maintainability, and operability of new and existing systems.</li><li>Ensure mechanical designs comply with ASME, API, ASTM, and other relevant international codes.</li><li>Monitor project site activities for progress, quality, and HSE compliance.</li><li>Participate in commissioning, testing, and performance verification of new installations or modifications.</li></ul><p><strong>Team &amp; Contractor Supervision</strong></p><ul><li>Supervise and coordinate work of maintenance technicians, contractors, and third-party service providers performing mechanical works.</li><li>Provide technical guidance, training, and performance feedback to maintenance personnel.</li><li>Develop a skilled and motivated mechanical maintenance workforce capable of meeting operational goals.</li><li>Allocate daily and weekly work assignments, ensuring proper resource utilization and task prioritization.</li><li>Coordinate with contract department and provide necessary documents for contract awarding including scope of work, technical evaluations, etc.</li><li>Manage and allocate manpower across all OTTCO locations to ensure sufficient workforce availability and maintain optimal performance.</li><li>Provide technical guidance and training to subordinates to enhance team competency and performance.</li></ul><p><strong>Budgeting &amp; Resource Control</strong></p><ul><li>Contribute to preparation of the mechanical maintenance budget and ensure compliance with approved cost controls.</li><li>Resourcing of spares, suppliers, and service providers where necessary to enhance and support maintenance activities.</li><li>Identify and manage both critical and non-critical spare parts requirements, monitor inventory levels, and coordinate with the warehouse/procurement to ensure availability.</li><li>Monitor and control maintenance expenditures and support cost optimization initiatives under ETIZAAN and other improvement programs.</li><li>Participate in annual budget reviews and identify opportunities for operational efficiency and reliability improvements.</li></ul><p><strong>Continuous Improvement</strong></p><ul><li>Identify and report deviations in performance, equipment behavior, or process efficiency.</li><li>Develop and implement action plans for maintenance improvement, cost reduction, and reliability enhancement.</li><li>Liaise with OEMs, Engineering, and Maintenance Support teams to resolve recurring mechanical issues.</li><li>Participate in audits, integrity assessments, and reliability improvement initiatives.</li><li>Perform any other duties or special assignments as directed by line management.</li><li>Evaluate contractor performance and ensure compliance with scope of work, safety standards, and contractual requirements.</li><li>Support audits, inspections, and compliance reviews by ensuring mechanical systems meet regulatory and company requirements.</li><li>Coordinate with engineering teams for modifications, upgrades, and new equipment commissioning.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s Degree in Mechanical Engineering or equivalent from a recognized university.</p><p><strong>Experience</strong></p><ul><li>Minimum +6 years of experience in mechanical maintenance within tank terminal, oil &amp; gas, refinery, or petrochemical sectors.</li><li>Demonstrated expertise in rotating equipment, mechanical seals, alignment, piping systems, and static equipment (tanks, pressure vessels, exchangers).</li><li>Proven track record in supervision of EPC and maintenance contractors during shutdowns and major overhauls.</li><li>Strong exposure to mechanical integrity programs, inspection schedules, and reliability analysis.</li><li>Working knowledge of international standards such as API 610/650/682, ASME, ASTM, and ISO.</li></ul><p><strong>Professional Certifications</strong></p><ul><li>Authorized Mechanical/Rotating Equipment Maintenance Certification (where applicable).</li><li>Training in Root Cause Analysis (RCA), Reliability Centered Maintenance (RCM), or Vibration Analysis is preferred.</li><li>HSE or PTW certifications such as NEBOSH/IOSH are desirable.</li><li>Familiarity with SAP or CMMS systems for maintenance management is advantageous.</li></ul><p><strong>Technical Competencies</strong></p><ul><li>Deep knowledge of pumps, compressors, valves, hydraulic systems, HVAC, and pipeline systems.</li><li>Proficient in interpreting P&amp;IDs, isometric drawings, and mechanical schematics.</li><li>Skilled in troubleshooting, root cause analysis, and reliability improvement methodologies.</li><li>Familiarity with corrosion mechanisms, mechanical integrity inspections, and cathodic protection systems.</li><li>Capable of planning, scheduling, and managing shutdown and turnaround activities.</li></ul><p><strong>Behavioral Competencies</strong></p><ul><li>Strong leadership, problem-solving, and decision-making skills.</li><li>Excellent coordination and communication across multidisciplinary teams.</li><li>Proactive and detail-oriented, with a strong sense of accountability and ownership.</li><li>High commitment to HSE culture and continuous improvement.</li><li>Ability to work effectively under pressure and manage multiple priorities.</li><li>Demonstrates integrity, professionalism, and alignment with OTTCO s corporate values and strategic vision.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What you will do: </p> <ul> <li>Responsible for the overall maintenance of the hotel s facilities and equipment</li> <li>Ensure that the maintenance budget and stock levels are controlled, ensuring that all expenses are kept in line with budget guidelines.</li> <li>To be fully aware, and competent in, all health and safety procedures, policies and assist with preparing all risk assessments. </li> <li>Ensure that there is an effective PPM schedules in place. </li> <li>Manage the onsite activity of all contractors. </li> <li>Order all maintenance supplies and ensure stock controls are in place. </li> <li>Maintain records of all machinery and equipment including manufacturers details, specifications, and manuals. </li> <li>Ensure that all fire safety equipment is maintained and tested in a timely manner. </li> <li>Arrange and co-ordinate quotations from suppliers in relation to maintenance work. </li> <li>Lead and manage a team of high-energy people who love our guests, by setting and monitoring goals, empowering and developing them, and creating an environment where people can be themselves. </li> <li>Pro-actively identify opportunities to improve and enhance processes and procedures. </li> <li>To be a member of the hotel crisis and fire teams, and to be fully conversant in all related procedures. </li> <li>Pro-actively project manage any changes in policies and procedures. </li> <li>Achieve and maintain the highest possible levels of customer service to both external and internal customers, forging long-term relationships with suppliers and contractors.</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Proven experience as a Chief Engineer in the hospitality industry or a related field</p> <ul> <li>Bachelor s Degree or Diploma in Mechanical, Electrical, Civil, or Electromechanical Engineering or related field.</li> <li>Minimum 8 12 years of engineering/facilities experience, including leadership roles.</li> <li>Strong leadership and team management skills</li> <li>Excellent problem-solving and decision-making capability</li> <li>Strong communication and interpersonal skills</li> <li>Ability to work under pressure and manage emergencies</li> <li>Strong organizational and planning skills</li> <li>Flexible working hours based on operational requirements</li> <li>Strong track record in strategic planning and project leadership</li> </ul><p></p></section>