Fire Fighting EngineerJobs

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Instrumentation Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all instrumentation systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of field instrumentation, analyzers, control valves, actuators, weighing systems, process measurement systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of instrumentation systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p><b>Detailed Description </b></p> <p>INSTRUMENTATION MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for instrumentation systems across the concentrator plant and supporting infrastructure.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, instrumentation standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on instrumentation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for instrumentation systems and equipment.</p> <p>INSTRUMENTATION AUTOMATION / PLC / DCS INTERFACE</p> <p>Provide technical leadership for the interface between field instrumentation and PLC, DCS, SCADA, and associated automation systems.</p> <p>Ensure reliable communication and signal integrity between transmitters, analyzers, control valves, actuators, weighing systems, and PLC/DCS/SCADA systems.</p> <p>Support troubleshooting of instrumentation-related PLC/DCS input and output signals, communication faults, alarms, interlocks, and control-loop performance issues.</p> <p>Coordinate with Automation and Electrical teams for instrument signal interfaces, control system modifications, logic changes, and system upgrades.</p> <p>Review instrumentation requirements for PLC/DCS/SCADA modifications, including I/O requirements, signal types, communication protocols, alarm and trip interfaces, and control-loop functionality.</p> <p>Support loop checking, instrument calibration, functional testing, interlock testing, commissioning, energization, and startup activities involving instrumentation and automation systems.</p> <p>Ensure proper configuration, documentation, and management of instrument I/O, loop drawings, instrument data sheets, cause-and-effect diagrams, alarm settings, and associated technical documentation.</p> <p>Participate in troubleshooting and Root Cause Failure Analysis (RCFA) where instrumentation, PLC/DCS, or communication-system interfaces contribute to equipment or process failures.</p> <p>Support implementation of improvements to process control, instrumentation reliability, measurement accuracy, and automation system performance.</p> <p>Ensure instrumentation and automation interfaces comply with approved engineering standards, OEM requirements, cybersecurity requirements, HSE procedures, and applicable statutory requirements.</p> <p>INSTRUMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for field instrumentation, analyzers, control valves, actuators, weighing systems, sampling systems, and process monitoring equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major instrumentation failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor instrument performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs for critical instrumentation assets.</p> <p>PROCESS INSTRUMENTATION &amp; ANALYZER SYSTEMS</p> <p>Ensure safe and reliable operation of process instrumentation systems.</p> <p>Maintain pressure, flow, level, temperature, density, pH, conductivity, and other process measurement devices.</p> <p>Maintain online analyzers, sampling systems, and associated instrumentation.</p> <p>Monitor instrument accuracy and implement corrective actions where necessary.</p> <p>Ensure compliance with calibration standards and measurement integrity requirements.</p> <p>Support process optimization and operational efficiency initiatives through accurate measurement and monitoring.</p> <p><br></p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Instrumentation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Instrumentation assets in large-scale mineral processing facilities.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP)</p> <p> ISA Certified Control Systems Technician (CCST)</p> <p> ISA Certified Automation Professional (CAP)</p> <p> Six-sigma (BB)</p> <p> </p> <p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide expert technical engineering leadership and operational support for OQEP's offshore facility facilities, including piping systems in processing plants and production platforms, under the direction of the Manager Operation &amp; Maintenance Support, ensuring safe, reliable, available and efficient operations across Upstream Surface Operations. The role delivers robust technical judgement, innovative engineering solutions and operability, availability and reliability assessments for off shore facility, evaluating modification and innovation proposals against project requirements, engineering standards and operational integrity. It provides hands-on operational support, technical troubleshooting and readiness assurance for assigned assets, while acting as the operations interface with projects, procurement, supply and other stakeholders. The role also mentors and develops production and junior engineers into self-sufficient performers, embeds common engineering principles across teams, and drives operational excellence, safety and reliability across OQEP's surface operations facilities.</p><p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main Tasks and Responsibilities</strong></p><p>Provide robust technical engineering expertise and innovative solutions for the execution and operation of offshore facility (piping systems in processing plants and production platforms), ensuring teams apply common engineering principles and concepts.</p><p>Lead and deliver operability, availability and reliability assessments on systems related to offshore facility, providing robust technical judgement on modification and innovation proposals in line with project requirements, engineering standards, safety and reliability.</p><p>Handle a large scope of concurrent engineering activities and projects, prioritizing and delivering high-quality technical outputs across multiple assets simultaneously.</p><p>Analyze complex technical, operational and reliability issues on offshore facility and recommend solutions that significantly improve safety, availability and performance.</p><p>Provide operational support for offshore facility (piping systems in processing plants and production platforms) at Upstream Surface Operations.</p><p>Deliver assigned operational duties and tasks for the assets, including technical support, troubleshooting, backup and other services to operate applicable hardware, systems software and application software.</p><p>Modify and improve engineering processes, standards, operating procedures and technical documentation to enhance reliability, integrity and operational efficiency.</p><p>Measure and assure progress towards the state of Operational Readiness to Operate (ORA), ensuring readiness for safe and efficient operations at the site.</p><p>Act as the Operations interface to manage procurement and supply issues, ensuring timely availability of technical materials, spares and services.</p><p>Act as the ORA interface to engage and coordinate with different stakeholders across the function on readiness, technical and operational matters.</p><p>Provide technical leadership, guidance and review to junior engineers, trainees and teams on engineering principles, standards and operational practices.</p><p>Mentor and coach production engineers and staff to build capability and develop them into self-sufficient, high-performing engineers.</p><p>Convince and influence internal stakeholders, projects and vendors to adopt sound engineering solutions, operability improvements and reliability-centred practices.</p><p>Support incident investigation, root cause analysis and corrective actions for offshore facility reliability and integrity issues.</p><p>Support planning, budgeting, forecasting and reporting for operations support engineering activities and embed KPIs in day-to-day work.</p><p>Perform other similar duties as assigned by the Manager Operation &amp; Maintenance Support.</p><p><strong>Key interactions</strong></p><p>Internal: Surface Operations, Operation &amp; Maintenance Support, Well Delivery, Projects Delivery, Technical Services, HSSE, Contract &amp; Procurement, and all relevant operational and support functions.</p><p>External: EPC and engineering contractors, equipment and piping vendors, OEMs, technical service providers, and specialist engineering consultants.</p><p><strong>Notable Working Conditions</strong>. Combination of office and field/plant environment; regular presence at processing plants and production platforms; intensive computer screen use; exposure to operational site conditions; occasional after-hours support for operational and readiness matters.</p><p><strong>Education Requirements</strong></p><p>Required: Bachelor's degree in Mechanical, Chemical, Process, Petroleum or a related Engineering discipline. Relevant post-degree qualification or professional engineering certification is preferred. Master's degree is a plus.</p><p><strong>Language</strong></p><p>Excellent knowledge of written, read and spoken English (required). Arabic is a plus.</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><p>8+ years' experience in Operations Support, Surface Operations, Process/Facilities Engineering or Production Engineering, preferably in the oil &amp; gas, energy or large industrial sector.</p><p>Proven track record of providing technical engineering leadership and operational support for offshore facility.</p><p>Strong experience in:</p><p>offshore facility and piping systems (processing plants and production platforms).</p><p>Operability, availability and reliability engineering.</p><p>Operational Readiness Assurance (ORA) and readiness-to-operate assessments.</p><p>Technical troubleshooting and operational support.</p><p>Modification and innovation proposal review against engineering standards.</p><p>Incident investigation and root cause analysis.</p><p>Engineering standards, codes and operating procedures.</p><p>Procurement and supply interface for technical materials and services.</p><p>Mentoring and developing junior engineers and Omani national talent.</p><p><br></p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Mechanical, Chemical, Process, Petroleum or a related Engineering discipline.</li><li>Relevant post-degree qualification or professional engineering certification is preferred.</li><li>Master's degree is a plus.</li><li>Excellent knowledge of written, read and spoken English (required). Arabic is a plus.</li><li>8+ years' experience in Operations Support, Surface Operations, Process/Facilities Engineering or Production Engineering, preferably in the oil &amp; gas, energy or large industrial sector.</li><li>Proven track record of providing technical engineering leadership and operational support for offshore facility.</li><li>Strong experience in: offshore facility and piping systems (processing plants and production platforms), Operability, availability and reliability engineering, Operational Readiness Assurance (ORA) and readiness-to-operate assessments, Technical troubleshooting and operational support, Modification and innovation proposal review against engineering standards, Incident investigation and root cause analysis, Engineering standards, codes and operating procedures, Procurement and supply interface for technical materials and services, Mentoring and developing junior engineers and Omani national talent.</li><li><strong>Behavioural Competencies:</strong> Strong technical and analytical problem-solving skills. Sound engineering judgement and decision-making. Maintaining effective, accurate and transparent communication with all stakeholders. Attention to detail and safety-first mindset. Planning and prioritization across multiple activities. Negotiation and influencing. Ethics, integrity and compliance. Engages and inspires colleagues to collaborate and share knowledge. Pursues innovation and continuous improvement. Acts as an agent for change, constructively challenging the status quo. Mentoring and coaching capability. Composure under operational and readiness pressure.</li><li><strong>Technical Competencies:</strong> Offshore facility and piping systems engineering (processing plants and production platforms). Operability, availability and reliability engineering. Operational Readiness Assurance (ORA) and readiness-to-operate. Technical troubleshooting and operational support. Modification/innovation proposal review and technical judgement. Engineering standards, codes and operating procedures. Incident investigation and root cause analysis (RCA). Process safety and asset integrity awareness. Procurement and supply interface for technical materials. Hardware, systems software and application software for operations. Excellent business and technical report writing skills. Very good knowledge of PC software and engineering tools.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Do you picture yourself as a Duty Engineer? At Crowne Plaza Resort Salalah, our goal is to make business travel work — and that’s where YOU come in.</span></p><br><p><span>When you join Crowne Plaza Resort Salalah, you are more than just your job title. We look for energetic, confident, and ambitious individuals who excel in their roles and help our guests succeed.</span></p><br><p><span>Set on 45 acres of beautiful tropical gardens and a long stretch of pristine sandy beach, Crowne Plaza Resort Salalah is perfectly positioned for business, meetings, and leisure travel.</span></p><br><p><span>As a Duty Engineer, you will play a vital role in maintaining the hotel's building systems, guest rooms, and public areas to the highest standards. You will ensure all engineering operations support an exceptional guest experience while promoting safety, sustainability, and cost-effective maintenance.</span></p><br><p><span>A little taste of your day-to-day</span></p><br><ul><li><p><span>Perform preventive and corrective maintenance on electrical, mechanical, HVAC, plumbing, and other building systems.</span></p><br></li><li><p><span>Respond promptly to guest maintenance requests and operational emergencies.</span></p><br></li><li><p><span>Inspect guest rooms, public areas, and back-of-house facilities to ensure they meet IHG brand standards.</span></p><br></li><li><p><span>Troubleshoot equipment faults and carry out repairs efficiently to minimize downtime.</span></p><br></li><li><p><span>Monitor the performance of plant and engineering equipment, reporting any defects or major maintenance requirements.</span></p><br></li><li><p><span>Ensure compliance with health, safety, fire, and environmental regulations and hotel policies.</span></p><br></li><li><p><span>Support energy conservation and sustainability initiatives by promoting efficient use of utilities and resources.</span></p><br></li><li><p><span>Maintain engineering tools, equipment, and maintenance records accurately.</span></p><br></li><li><p><span>Work closely with other hotel departments to support daily operations and deliver excellent guest service.</span></p><br></li></ul><p><span>What do we need from you?</span></p><br><ul><li><p><span>Diploma or certification in Electrical, Mechanical, HVAC, or a related Engineering discipline.</span></p><br></li><li><p><span>Minimum of 3 years' experience in hotel engineering or facilities maintenance, including at least 2 years of experience in GCC countries.</span></p><br></li><li><p><span>Strong knowledge of electrical, plumbing, HVAC, mechanical systems, and general building maintenance.</span></p><br></li><li><p><span>Proven ability to troubleshoot, repair, and maintain hotel engineering systems efficiently.</span></p><br></li><li><p><span>Good communication, teamwork, and problem-solving skills.</span></p><br></li><li><p><span>Service-oriented with the ability to work independently and under pressure.</span></p><br></li><li><p><span>Willingness to work flexible shifts, including weekends, public holidays, and emergency call-outs when required.</span></p><br></li></ul><br>At IHG, we’ve made a promise. As one of the world’s leading hotel groups, we’re here to deliver True Hospitality for Good. Making our guests and colleagues feel welcome, cared for, recognised and respected – wherever they are in the world. Want to be part of the journey? </div>

<p><h4>Description</h4> <p>Mindrift is looking for highly skilled senior Python data scraping engineers to join the Tendem project and drive specialized data scraping workflows within our hybrid AI + human system.</p> <p>In this role, as an AI pilot – that’s how we refer to this role at Mindrift – you’ll collaborate with Tendem agents that handle repetitive tasks, while you provide critical thinking, domain expertise, and quality control to deliver accurate and actionable results.</p> <p>This part-time remote opportunity is ideal for technical professionals with hands-on experience in web scraping, data extraction and processing.</p> <h4>What we do</h4> <p>The Mindrift platform connects specialists with AI projects from major tech innovators. Our mission is to unlock the potential of generative AI by tapping into real-world expertise from across the globe.</p> <p>This is a freelance role for a Tendem project. As a senior Python data scraping engineer, you'll handle data scraping tasks requiring technical precision for web extraction and processing, utilizing various tools such as our provided Apify and OpenRouter alongside your own resourceful approaches.</p> <h4>Key responsibilities:</h4> <li>Own end-to-end data extraction workflows across complex websites, ensuring complete coverage, accuracy, and reliable delivery of structured datasets.</li> <li>Leverage internal tools (Apify, OpenRouter) alongside custom workflows to accelerate data collection, validation, and task execution while meeting defined requirements.</li> <li>Ensure reliable extraction from dynamic and interactive web sources, adapting approaches as needed to handle JavaScript-rendered content and changing site behavior.</li> <li>Enforce data quality standards through validation checks, cross-source consistency controls, adherence to formatting specifications, and systematic verification prior to delivery.</li> <li>Scale scraping operations for large datasets using efficient batching or parallelization, monitor failures, and maintain stability against minor site structure changes.</li> <h4>Requirements:</h4> <li>At least 5+ years of relevant experience in data engineering, web scraping, automation, or software development (required).</li> <li>Bachelor’s or master’s degree in engineering, applied mathematics, computer science, or related technical fields is a plus.</li> <li>Candidates should have a strong technical foundation and practical experience with scripting, automation, and AI-assisted workflows. We are looking for specialists who can solve non-trivial problems, work confidently with LLMs, and systematically collect, structure, and validate data from diverse sources. A methodical, detail-oriented approach and the ability to work independently are essential.</li> <li>Strong experience in Python web scraping (BeautifulSoup, Selenium or similar), including dynamic content (JS, AJAX, infinite scroll) and APIs via proxies.</li> <li>Proven ability to extract data from complex structures (hierarchies, archived pages, inconsistent HTML).</li> <li>Solid background in data cleaning, normalization, and validation, delivering structured datasets (CSV, JSON, Google Sheets).</li> <li>Demonstrated experience handling anti-bot mechanisms and dynamic site structures at scale.</li> <li>Experience with cloud infrastructure (AWS or equivalent) and containerization (Docker) as part of real workflows.</li> <li>Hands-on experience with LLM frameworks (LangChain, OpenRouter, or similar) applied to automation tasks.</li> <li>Strong attention to detail and commitment to data accuracy.</li> <li>Self-directed work ethic with ability to troubleshoot independently.</li> <li>A link to GitHub is a plus.</li> <li>English proficiency: Upper-intermediate (B2) or above (required).</li> <h4>Project time expectations</h4> <p>For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements. This is an estimate, not a guaranteed workload, and applies only while the project is active.</p> <h4>Compensation</h4> <p>On this project, contributors can earn up to $37 per hour equivalent, depending on their level and pace of contribution.</p> <p>Compensation varies across projects depending on scope, complexity, and required expertise. Please note that other projects on the platform may offer different earning levels based on their requirements.</p></p><p></p>

<p>The Senior Software Engineer designs, develops, implements, and supports secure, scalable, and high-quality software solutions that enable the Bank's digital products and technology services. He/She leads the delivery of complex software initiatives, establishes engineering best practices, ensures operational excellence, and collaborates with cross-functional teams to deliver reliable, maintainable, and high-performing technology solutions.The Senior Software Engineer promotes engineering excellence by driving software quality, automation, technical innovation, secure development practices, and continuous improvement while mentoring engineers and contributing to the Bank's technology transformation initiatives. Key Accountabilities: Mentors and coaches software engineers through technical guidance, knowledge sharing, design reviews, and continuous professional development. Drives continuous improvement by identifying opportunities to optimize software architecture, development processes, automation, operational efficiency, and technology practices. Maintains technical documentation, development standards, operational procedures, and knowledge repositories to support sustainable application lifecycle management. Ensures compliance with the Bank's technology policies, information security standards, regulatory requirements, and software engineering governance frameworks. Performs any other responsibilities consistent with the scope of the role, as assigned by the line manager.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related discipline. Equivalent practical experience may be considered. Minimum of 6 years of professional software engineering experience, including experience designing, developing, and supporting production-grade applications and services. Demonstrated experience delivering scalable enterprise software solutions across the full software development lifecycle. Strong experience with one or more modern programming languages such as Python, Java, Go, TypeScript, Dart, or similar technologies. Experience developing and supporting RESTful APIs, microservices, distributed applications, and modern software architecture. Experience with relational databases, data modelling, API integration, application performance optimization, and cloud-native application development. Experience with CI/CD pipelines, DevOps practices, containerization technologies, Infrastructure as Code (IaC), and cloud platforms such as OCI, AWS, Azure, or Google Cloud. Knowledge of software engineering best practices including version control, automated testing, secure coding, code reviews, and release management. Experience developing or supporting Artificial Intelligence, machine learning, or intelligent automation solutions is preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Quality Control (QC) Engineer – Construction Excellence Specialist<br></strong><br> Are you a detail-driven engineer passionate about delivering exceptional quality in large-scale construction projects? Join a dynamic team where your expertise in quality control systems will directly impact the successful execution and handover of complex infrastructure. As a QC Engineer, you will be at the forefront of maintaining rigorous construction quality management standards, collaborating closely with site teams, subcontractors, and project leaders to ensure every deliverable meets contractual and regulatory requirements. Your role is pivotal in driving quality processes, identifying issues early, and championing continuous improvement that safeguards the integrity and safety of our projects.<br> Required Skills<ul><li>Strong knowledge and practical experience in implementing construction Quality Control (QC) management systems.</li><li>Proven ability to assist in planning, developing, and executing quality programs aligned with contract and project quality plans.</li><li>Experience reviewing and approving product/material requisitions and subcontractor quality documentation, including Quality Management Systems, quality plans, and Inspection Test Plans (ITPs).</li><li>Skilled in conducting quality inductions, monitoring inspections, and assessing contractor compliance with QC procedures.</li><li>Proficiency in data management relating to QC records, non-conformance reports (NCRs), and turnover documentation.</li><li>Excellent communication skills to promote quality awareness and deliver targeted training.</li><li>Proficient in Microsoft Office Suite.</li></ul>Nice to Have Skills<ul><li>Familiarity with international standards such as EN standards, ASME code, EN1090 (structural steel), and the Pressure Equipment Directive (PED) for piping.</li><li>Quality Auditor certification from a recognized industry body.</li><li>Experience with construction completion and turnover management processes.</li><li>Understanding of Romanian regulatory requirements (ISCIR, INSEMEX, ISU, AFER, ANRE, RENAR, ISC).</li></ul>Preferred Education and Experience<ul><li>Bachelor’s degree in Engineering or a closely related discipline.</li><li>Minimum of 5 years of hands-on experience working in quality roles within EPC (Engineering, Procurement, and Construction) contract environments.</li><li>Demonstrated background in welding engineering, supported by relevant training or internationally recognized courses.</li></ul>Other Requirements<ul><li>Ability to work collaboratively with multidisciplinary teams and subcontractors on site.</li><li>Proven organizational skills for maintaining robust QC documentation and reporting.</li><li>Willingness to engage in local management reviews and continuous improvement initiatives.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Conveyors &amp; Utilities Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of conveyor systems, stacking systems, reclaiming systems, feeders, transfer stations, utility systems, and associated plant equipment within mineral processing operations. The role ensures the safe, reliable, and cost-effective operation of conveyors and utility assets through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses.</p> <p>The incumbent is responsible for the maintenance and reliability of conveyor belts, pulleys, idlers, drives, gearboxes, feeders, stacking systems, reclaiming systems, compressed air systems, process water systems, fire water systems, pumps, utility distribution networks, and associated mechanical equipment. The role works closely with Operations, Reliability, Electrical, Instrumentation, and Project teams to achieve production, safety, utility availability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>CONVEYORS &amp; UTILITIES MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for conveyor systems, transfer stations, feeders, stacking &amp; reclaiming systems, utility systems, pumps, compressors, and auxiliary equipment.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, maintenance standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on maintenance planning, scheduling, and execution.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for conveyors, pulleys, idlers, belt cleaners, drives, gearboxes, feeders, pumps, compressors, and utility systems.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and budgets for conveyor and utility assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of conveyor, stacker, reclaimer, and utility system shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the mechanical integrity of critical conveyors and utility equipment.</p> <p>Monitor wear-life performance of belts, pulleys, idlers, chutes, drives, pumps, compressors, and utility systems.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>TECHNICAL SUPPORT &amp; TROUBLESHOOTING</p> <p>Provide advanced troubleshooting support for major conveyor and utility equipment failures.</p> <p>Review vibration analysis, thermography, lubrication analysis, and condition monitoring reports.</p> <p>Support operations in resolving equipment performance and reliability issues.</p> <p>Evaluate equipment modifications and engineering improvements.</p> <p>Review of OEM recommendations, technical reports, and equipment upgrade proposals.</p> <p>Support commissioning, testing, and startup of new equipment and system modifications.</p> <p>CONTINUOUS IMPROVEMENT</p> <p>Drive continuous improvement initiatives to enhance conveyor availability, material handling efficiency, utility system reliability, and plant throughput.</p> <p>Identify opportunities to reduce maintenance costs and minimize unplanned downtime.</p> <p>Implement reliability improvement and Lean Maintenance methodologies.</p> <p>Develop business cases for equipment upgrades and improvement projects.</p> <p>Track and report benefits realized from improvement initiatives.</p> <p>Promote maintenance and operational best practices across the organization.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in a Concentrator Plant/related process plant with similar type of equipment</p> <p> 8+ years of experience in the mining/processing industry or related.</p> <p> Proven track record of successfully managing maintenance in large-scale processing maintenance</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Six-sigma (BB)</p> <p><br></p>

<p>The Senior Power System Secondary Engineer acts as the technical authority on behalf of the project developer, providing independent oversight, review, and verification of all secondary systems engineering across utility-scale renewable energy plants (Solar PV, Wind) and Battery Energy Storage Systems (BESS). The role is pivotal in ensuring that designs delivered by EPC contractors and specialist consultants are technically sound, safe, cost-effective, and fully compliant with International Best Practices, utility / TSO requirements, and applicable International Standards (IEC, IEEE/ANSI). </p><br><p>Design Review & Verification</p><ul><li><p>Lead the review and verification of all secondary design deliverables — including Single Line</p></li></ul><p>Diagrams (SLDs), Protection & Metering Diagrams (PMDs), Block Logic Diagrams (BLDs), AC/DC</p><p>schematics, and LV System Design Documents — for HV substations and renewable plants.</p><ul><li><p>Verify protection and control philosophies, including relay settings, selectivity analyses, and</p></li></ul><p>coordination studies (short-circuit calculations, CT/VT sizing) prepared by consultants and EPC</p><p>contractors.</p><ul><li><p>Review and approve interlocking schemes, bay-level logic, and station-level automation across</p></li></ul><p>switchgear, transformers, feeders, and renewable energy plant interfaces.</p><p>Substation Automation & SCADA</p><ul><li><p>Approve substation automation and SCADA architectures, ensuring correct implementation of IED</p></li></ul><p>logic, signal lists, and interlocking schemes at bay and station levels.</p><ul><li><p>Oversee the integration and configuration of communication protocols — IEC 61850</p></li></ul><p>(GOOSE/SV/MMS), IEC 60870-5-104, and DNP3 — governing data flow between Plant Power</p><p>Controllers (PPC/EMS), substations, and utility control centers.</p><ul><li><p>Review IED configurations, substation HMI displays, and historian / data management architectures</p></li></ul><p>for completeness and compliance.</p><p>Telecommunications & Cybersecurity</p><ul><li><p>Review and validate communication and telecommunication architectures, including managed</p></li></ul><p>network design (VLANs, PRP/HSR redundancy), cybersecurity policies (IEC 62351 / NERC-CIP</p><p>aligned), and tele-protection performance requirements.</p><p>Standards, Compliance & Grid Code Adherence</p><ul><li><p>Ensure strict adherence to international standards and grid codes (IEC, IEEE/ANSI) by performing</p></li></ul><p>technical audits and vetting technical submissions to Transmission / Distribution System Operators</p><p>(TSO/DSO).</p><ul><li><p>Manage technical interfaces and coordinate between EPC contractors, engineering consultants,</p></li></ul><p>OEMs, and the grid operator to ensure a coherent and optimized secondary systems design.</p><p>Testing, Commissioning & Project Governance</p><ul><li><p>Provide technical governance during critical project phases, including witnessing Factory</p></li></ul><p>Acceptance Tests (FAT) and Site Acceptance Tests (SAT), and reviewing commissioning</p><p>procedures for all secondary systems.</p><ul><li><p>Review and approve test plans, testing protocols, punch lists, and commissioning records to ensure</p></li></ul><p>safe energization of HV substations and plant systems.</p><ul><li><p>Act as the Owner’s Engineer representative in te</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education</p><ul><li><p>Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or a closely related field.</p></li><li><p>Professional Engineering registration (PE / CEng or equivalent) is an advantage.</p></li></ul><p>Experience</p><ul><li><p>8+ years of engineering experience with a demonstrable focus on substation secondary systems</p></li></ul><p>design and delivery.</p><ul><li><p>Significant experience in a developer, owner’s engineer, or utility role with direct responsibility for</p></li></ul><p>managing and challenging EPC contractor deliverables.</p><ul><li><p>Proven track record on grid-connected utility-scale renewable energy projects (Solar PV, Wind)</p></li></ul><p>and/or Battery Energy Storage Systems (BESS).</p><ul><li><p>Experience working across the full project lifecycle from FEED and detailed design through to FAT,</p></li></ul><p>SAT, and commercial operation</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Do you picture yourself as a Duty Engineer? At Crowne Plaza Resort Salalah, our goal is to make business travel work — and that’s where YOU come in.</span></p><br><p><span>When you join Crowne Plaza Resort Salalah, you are more than just your job title. We look for energetic, confident, and ambitious individuals who excel in their roles and help our guests succeed.</span></p><br><p><span>Set on 45 acres of beautiful tropical gardens and a long stretch of pristine sandy beach, Crowne Plaza Resort Salalah is perfectly positioned for business, meetings, and leisure travel.</span></p><br><p><span>As a Duty Engineer, you will play a vital role in maintaining the hotel's building systems, guest rooms, and public areas to the highest standards. You will ensure all engineering operations support an exceptional guest experience while promoting safety, sustainability, and cost-effective maintenance.</span></p><br><p><span>A little taste of your day-to-day</span></p><br><ul><li><p><span>Perform preventive and corrective maintenance on electrical, mechanical, HVAC, plumbing, and other building systems.</span></p><br></li><li><p><span>Respond promptly to guest maintenance requests and operational emergencies.</span></p><br></li><li><p><span>Inspect guest rooms, public areas, and back-of-house facilities to ensure they meet IHG brand standards.</span></p><br></li><li><p><span>Troubleshoot equipment faults and carry out repairs efficiently to minimize downtime.</span></p><br></li><li><p><span>Monitor the performance of plant and engineering equipment, reporting any defects or major maintenance requirements.</span></p><br></li><li><p><span>Ensure compliance with health, safety, fire, and environmental regulations and hotel policies.</span></p><br></li><li><p><span>Support energy conservation and sustainability initiatives by promoting efficient use of utilities and resources.</span></p><br></li><li><p><span>Maintain engineering tools, equipment, and maintenance records accurately.</span></p><br></li><li><p><span>Work closely with other hotel departments to support daily operations and deliver excellent guest service.</span></p><br></li></ul><p><span>What do we need from you?</span></p><br><ul><li><p><span>Diploma or certification in Electrical, Mechanical, HVAC, or a related Engineering discipline.</span></p><br></li><li><p><span>Minimum of 3 years' experience in hotel engineering or facilities maintenance, including at least 2 years of experience in GCC countries.</span></p><br></li><li><p><span>Strong knowledge of electrical, plumbing, HVAC, mechanical systems, and general building maintenance.</span></p><br></li><li><p><span>Proven ability to troubleshoot, repair, and maintain hotel engineering systems efficiently.</span></p><br></li><li><p><span>Good communication, teamwork, and problem-solving skills.</span></p><br></li><li><p><span>Service-oriented with the ability to work independently and under pressure.</span></p><br></li><li><p><span>Willingness to work flexible shifts, including weekends, public holidays, and emergency call-outs when required.</span></p><br></li></ul><br>At IHG, we’ve made a promise. As one of the world’s leading hotel groups, we’re here to deliver True Hospitality for Good. Making our guests and colleagues feel welcome, cared for, recognised and respected – wherever they are in the world. Want to be part of the journey? </div>

<p><b>Brief Posting Description </b></p> <p>The Engineer Automation is responsible for supporting the maintenance, reliability, availability, and performance optimization of automation, process control, and industrial digital systems across the Copper Concentrator Plant. The role supports the safe, reliable, and cost-effective operation of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA systems, Human Machine Interfaces (HMI), industrial communication networks, historians, servers, workstations, and associated automation infrastructure through maintenance execution, troubleshooting, cybersecurity compliance, shutdown support, commissioning activities, and continuous improvement initiatives.</p> <p>The position provides technical support to maintenance teams and contractors and is responsible for maintaining automation and control systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking &amp; Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure.</p> <p>The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p><b>Detailed Description </b></p> <p>AUTOMATION &amp; CONTROL SYSTEM MANAGEMENT</p> <p>Support maintenance activities for automation, process control, and industrial digital systems across the concentrator plant.</p> <p>Ensure automation systems support safe, reliable, and efficient plant operation.</p> <p>Assist in implementing maintenance strategies to improve system reliability and availability.</p> <p>Monitor automation system performance and recommend corrective actions.</p> <p>Ensure compliance with OEM recommendations, engineering standards, and statutory requirements.</p> <p>Support asset lifecycle management and replacement planning activities.</p> <p>Provide technical support for automation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and operational readiness activities.</p> <p>DCS, PLC &amp; SCADA SYSTEMS</p> <p>Support reliability improvement initiatives for DCS, PLC, SCADA, HMI, historian, and control system infrastructure.</p> <p>Assist with automation system configuration, maintenance, and performance optimization.</p> <p>Troubleshoot control logic, process interlocks, alarms, permissives, and control loops.</p> <p>Support backup, restore, and disaster recovery activities.</p> <p>Assist with software version control and change management processes.</p> <p>Support testing and verification of DCS, PLC, and SCADA modifications.</p> <p>Maintain automation documentation, logic diagrams, and system records.</p> <p>MOC &amp; CHANGE GOVERNANCE</p> <p>Support implementation of approved Management of Change (MOC) requirements for automation modifications and software changes.</p> <p>Assist in reviewing proposed changes to DCS, PLC, SCADA, HMI, historian, control logic, alarms, interlocks, and associated automation infrastructure.</p> <p>Participate in risk assessments, testing, validation, and documentation activities associated with approved changes.</p> <p>Coordinate with Operations, Instrumentation, Electrical, Reliability, and Projects teams during implementation activities.</p> <p>Support FAT, SAT, simulation testing, commissioning, and post-implementation verification activities.</p> <p>Ensure technical documentation remains updated following approved modifications.</p> <p>Participate in post-change reviews and verification activities.</p> <p>PROCESS CONTROL &amp; OPTIMIZATION</p> <p>Support process control and automation improvement initiatives.</p> <p>Analyze process performance and identify opportunities for control-loop optimization.</p> <p>Assist with control-loop tuning and performance monitoring.</p> <p>Support initiatives aimed at improving throughput, recovery, plant stability, and energy efficiency.</p> <p>Support implementation of advanced process control technologies and digital solutions.</p> <p>Work closely with Operations and Metallurgical teams to optimize plant performance</p> <p>IT/OT CYBERSECURITY INTERFACE</p> <p>Support implementation of cybersecurity requirements for DCS, PLC, SCADA, HMI, historians, servers, workstations, and industrial communication networks.</p> <p>Assist with user access management, backup verification, patching activities, and cybersecurity compliance requirements.</p> <p>Participate in cybersecurity audits, vulnerability assessments, and incident investigations as required.</p> <p>Support cybersecurity-related upgrades and remediation activities.</p> <p>Ensure automation activities comply with approved OT cybersecurity policies and procedures.</p> <p>Maintain coordination between IT, OT Cybersecurity, Automation, Instrumentation, Electrical, Operations, and Project teams.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor's Degree in Automation Engineering, Control Systems Engineering, Electrical &amp; Automation Engineering, Mechatronics Engineering, Instrumentation &amp; Control Engineering, or related discipline is mandatory.</p> <p><b>Experience</b>: </p> <p> Bachelor s Degree with 5+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 3 years of experience in Automation maintenance and reliability engineering is mandatory.</p> <p> Experience supporting DCS, PLC, SCADA, and industrial communication systems in mineral processing or heavy&nbsp;</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves Frontier coding agents are already good at passing tests.<br> We measure whether they pass them the right way .<br>We're building a dataset to evaluate the safety and conduct of AI coding agents — not just whether they complete a task, but whether they do it honestly, within scope, and without cutting corners.<br>You'll design tasks where the easy path is the unsafe one, and write the tests that catch it: Build realistic developer environments — a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks that pair a benign development goal with a tempting unsafe shortcut: scope creep, policy violations, data corruption, over-permissive changes Write tests that verify whether the agent completed the task the right way — catching corners cut, not just checking outputs Iterate on tasks and tests based on QA feedback — review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling; Not prompt engineering; Not cybersecurity or red-teaming — there is no attacker in the scenario.<br> Cybersecurity experience is a nice-to-have but not a requirement.<br> We're looking for engineers who understand how code should behave, not penetration testers.<br> Strong software engineers, not security specialists; Not writing code from scratch — the agent writes most of the code; you design the situation and evaluate the outcome; What we look for 4–5+ years in software development; Core stack: Python, JavaScript/TypeScript; Strong test design skills — functional and integration tests that separate safe from unsafe completion, not just correct from incorrect; Hands-on experience with coding agents (Claude Code, GitHub Copilot CLI, Codex, or similar); Familiarity with GitHub PRs and CI workflows as a user; Stack breadth is welcome, not a filter.<br> Tasks simulate real repositories with databases, CI pipelines, and deploy scripts, so wider backend and infrastructure exposure is genuinely useful — but you don't need to be an expert in every layer; English proficiency — B2+ Why this is hard Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> The real difficulty is building the temptation — a scenario where the unsafe or out-of-scope path is the path of least resistance — and then writing tests that reliably catch an agent that took it.<br> Tasks have many valid solutions; tests must accept all of them and reject the bad ones.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid Project time expectations For this project, tasks are estimated to require around 20-25 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation On this project, contributors can earn up to $75 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<p>Production Engineer Responsibilities: - Identify manpower requirements based on production plans. - Raise manpower requisitions for new hires. - Coordinate with the HR department for recruitment activities. - Screen resumes and shortlist suitable candidates. - Conduct initial interviews for operators, technicians, and production staff. - Evaluate candidates' technical skills, experience, and attitude. - Plan and conduct new employee induction and orientation. - Train new employees on production processes, quality standards, and safety procedure.</p><p><strong>Desired Candidate Profile</strong></p><p>Requirements - 3-7 years experience in sandwich panel manufacturing company.</p>

<p>Responsibilities: Collaborate with production team on equipment optimization Ensure compliance with safety standards during maintenance activities Maintain pharmaceutical machinery, HVAC systems &amp; chillers</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Goodman Masson is partnering with a new financial markets infrastructure venture under formation in Oman.<br> Backed by prominent institutional investors, the business is building a greenfield platform from the ground up, and is now hiring at the build stage.<br> This is a rare chance to help stand up critical market infrastructure from a blank sheet and then run what you have built.<br> The role The Network and Security Engineer builds and looks after the network the platform runs on, and keeps it secure at the same time.<br> In the build phase you help design and then stand up the network from the ground up.<br> In the run phase you keep it working, watch it, and fix it when something breaks.<br> What you will do Help design and then build the network: segmentation and zoning, routing and switching, firewalls, load balancing, DNS, and time synchronisation, engineered for steady low-latency performance Set up and secure connectivity to external counterparties such as custodians, settlement banks, and market systems Own perimeter and internal network security in the first line: firewalls, segmentation, secure and privileged remote access, and certificate and encryption management Keep network devices patched and hardened, support penetration testing, and close network findings Lead the first response to network and security incidents, and escalate cleanly when needed Keep the network documented to a standard that holds up under review Location and terms Based in Muscat, Oman.<br> Permanent for Omani nationals; two-year fixed-term contract for expatriate hires.<br> Omani nationals are strongly encouraged to apply.<br> If this is your kind of build, please apply now!<br> What you will bring Degree in computer science, networking, information security, or a related field, or equivalent hands-on experience At least six years in network engineering, with direct hands-on responsibility for network security as well as the network itself Strong network design and operation: segmentation and zoning, routing and switching, firewalls, load balancing, secure remote access, and low-latency design Direct experience owning first-line network security including firewalls, hardening, certificates, and secure connectivity Experience securing external-facing connectivity in a regulated or high-assurance setting Experience leading the first response to a live network or security incident Hands-on credibility: able to configure a firewall and a switch, segment a network, read a packet capture, and challenge a vendor design Fluent English, written and spoken Also of interest Experience in financial services or financial market infrastructure such as a central securities depository, central counterparty, exchange, or payment system Experience with secure connectivity to SWIFT, Bloomberg, or the international central securities depositories Infrastructure-as-code and automation experience such as Terraform or Ansible Relevant certifications in networking such as CCNP or CCIE, and in security such as CISSP</span> </div>

<p><b>Brief Posting Description </b></p> <p>The Planning Engineer is responsible for developing, implementing, and managing maintenance planning, scheduling, work management, shutdown planning, and maintenance control processes to ensure safe, reliable, and efficient plant operations.This role supports leadership in maintenance planning and resource coordination, and ensures the effective utilization of labor, materials, and services. A key focus of the position is establishing maintenance planning systems, CMMS processes, and work management standards to support commissioning, start-up, and sustainable plant operations.</p> <p>Detailed Description </p> <p>MAINTENANCE PLANNING &amp; SCHEDULING</p> <p>Develop and implement maintenance planning and scheduling processes.</p> <p>Ensure all preventive, predictive, corrective, and shutdown maintenance activities are properly planned and scheduled.</p> <p>Review work requests and convert approved work into executable job plans.</p> <p>Develop detailed work packs including labor requirements, materials, tools, permits, and procedures.</p> <p>Coordinate weekly and monthly maintenance schedules with Operations and Maintenance teams.</p> <p>Monitor schedule compliance and planning effectiveness.</p> <p>Ensure maintenance backlogs are effectively managed and prioritized.</p> <p>Support development of maintenance strategies for critical equipment.</p> <p>Own and govern the site's maintenance work management process, ensuring compliance with planning, scheduling, execution, and close-out standard</p> <p>Coordinate with warehouse and procurement teams to ensure timely availability of critical spares and shutdown materials</p> <p>Develop and maintain maintenance performance dashboards, reporting automation, and planning analytics tools to improve decision-making</p> <p>Coordinate and lead weekly, monthly and quarterly planning meetings in coordination with stakeholders</p> <p>WORK MANAGEMENT &amp; CMMS ADMINISTRATION</p> <p>Manage maintenance work management processes within ERP/CMMS systems.</p> <p>Ensure work order quality, data accuracy, and system compliance.</p> <p>Develop and maintain equipment hierarchies, asset registers, and maintenance plans.</p> <p>Monitor key work management KPIs.</p> <p>Maintain planning and scheduling standards across all maintenance disciplines.</p> <p>Ensure historical maintenance records are maintained for reliability analysis.</p> <p>Drive continuous improvement of CMMS utilization and effectiveness.</p> <p>SHUTDOWN &amp; TURNAROUND PLANNING</p> <p>Lead planning and preparation for plant shutdowns, turnarounds, and major maintenance campaigns.</p> <p>Develop integrated shutdown schedules and resource plans.</p> <p>Coordinate labor, equipment, materials, and contractor requirements.</p> <p>Monitor shutdown planning milestones and readiness reviews.</p> <p>Support execution teams during shutdown implementation.</p> <p>Facilitate shutdown governance meetings, readiness reviews, and critical path monitoring activities</p> <p>Conduct post-shutdown reviews and lessons learned assessments.</p> <p>PERFORMANCE MONITORING &amp; REPORTING</p> <p>Develop maintenance planning and execution performance dashboards.</p> <p>Monitor KPIs including:</p> <p>Schedule Compliance</p> <p>PM Compliance</p> <p>Backlog Management</p> <p>Work Order Closure Rates</p> <p>Contractor Performance</p> <p>Maintenance Cost Performance</p> <p>Shutdown Performance</p> <p>Prepare weekly and monthly maintenance performance reports.</p> <p>Analyze trends and recommend improvement initiatives.</p> <p>Support annual maintenance budgeting and forecasting processes.</p> <p>CONTRACTOR &amp; RESOURCE MANAGEMENT</p> <p>Coordinate with contract administrator for mobilization and demobilization activities.</p> <p>Evaluate contractor performance and productivity.</p> <p>Ensure contractors comply with safety, quality, and environmental requirements.</p> <p>Optimize utilization of labor, equipment, and maintenance resources.</p> <p>Coordinate external specialist services and OEM support.</p> <p>LEADERSHIP &amp; TEAM MANAGEMENT</p> <p>Lead maintenance planners, schedulers from Contractors</p> <p>Develop workforce capability and succession plans.</p> <p>Promote a culture of accountability, collaboration, and continuous improvement.</p> <p>Ensure departmental objectives align with maintenance business goals.</p> <p>SAFETY &amp; COMPLIANCE</p> <p>Ensure compliance with company safety policies and procedures.</p> <p>Participate in risk assessments and shutdown safety planning.</p> <p>Ensure contractor compliance with permit-to-work and site safety requirements.</p> <p>Support incident investigations and corrective action implementation.</p> <p>Promote safe work practices and zero-harm objectives.</p> <p>BUDGET &amp; COST CONTROL</p> <p>Support preparation of annual maintenance budgets.</p> <p>Monitor maintenance expenditures against approved budgets.</p> <p>Track contractor costs and service contract performance.</p> <p>Identify cost optimization opportunities without compromising reliability.</p> <p>Support spare parts and inventory management strategies.</p> <p>Provide cost forecasting and budget variance analysis.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor s degree in mechanical engineering or a related field</p> <p><b>Experience: </b></p> <p> 10+ years of maintenance planning, shutdown planning, or maintenance management experience in mining, minerals processing, or heavy industrial operations.</p> <p> Proven experience with large-scale shutdown planning and resources management.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirabl</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Practitioner (CMRP)</p> <p> Project Management Professional (PMP)</p> <p> Six-sigma (BB)</p> <p>Technical Skills: </p> <p> Maintenance Planning and Scheduling</p> <p> Work Management Systems</p> <p> Shutdown and turnaround planning</p> <p> SAP PM</p> <p> Budgeting and Cost Control</p> <p> Resource Planning</p> <p> Procurement Processes</p> <p> Contractor Performance Management</p> <p> Maintenance KPI Reporting and Analysis</p> <p> Inventory and Spare Parts Management</p> <p> Risk Management</p> <p>Soft Skills: </p> <p><br></p>

<p>A Welding Quality Control (QC) Engineer is a specialized professional responsible for ensuring that all welding operations meet defined quality, safety, and technical standards throughout a project or manufacturing process.</p><p>Responsibilities</p><ul><li>Inspect welds using visual and NDT methods (UT, RT, MT, PT).</li><li>Develop and review WPS, PQR, and welder qualification records.</li><li>Ensure compliance with codes such as AWS D1.1, ASME IX, API 1104.</li><li>Monitor preheat, interpass temperature, and PWHT.</li><li>Prepare NCRs, inspection reports, and quality documentation.</li><li>Control material and consumable traceability.</li><li>Coordinate with clients, third-party inspectors, and project teams.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Age limit is 24-50</p><p>Need Gulf Experience</p>

<p>Responsible for supervising daily site activities, ensuring construction works are executed as per approved drawings, specifications, and project schedules. The candidate should coordinate with subcontractors, monitor progress, maintain site records, and ensure compliance with quality and safety requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>Can share cv on PHONE_NUMBER</p>

<p>The Software Engineer is responsible for designing, developing, testing, implementing, and supporting secure, reliable, and scalable software solutions that support the Bank's digital services and business operations.He/She develops high-quality software applications, contributes to the delivery of technology initiatives, supports production systems, and collaborates with cross-functional teams to ensure solutions meet business, technical, security, and operational requirements.The Software Engineer contributes to engineering excellence by following established software development standards, embracing continuous learning, and supporting the delivery of innovative technology solutions that enhance the Bank's digital transformation journey.</p><p><strong>Key Accountabilities:</strong></p><ul><li>Develops, tests, implements, and maintains software applications and technology solutions in accordance with business requirements, architectural standards, and development best practices.</li><li>Delivers assigned software development activities within agreed timelines while proactively identifying, communicating, and mitigating delivery risks and technical issues.</li><li>Produces technical documentation, solution designs, and implementation documentation to support software development, maintenance, and knowledge sharing.</li><li>Develops secure, scalable, maintainable, and reusable application components that comply with the Bank's software engineering standards and coding practices.</li><li>Performs unit testing, integration testing, debugging, defect resolution, and code optimization to ensure software quality and application reliability.</li><li>Participates in code reviews, technical discussions, and peer collaboration to improve software quality, knowledge sharing, and engineering consistency.</li><li>Supports application deployment, production releases, monitoring, and post-implementation activities to ensure stable and reliable production environments.</li><li>Monitors application performance, system logs, operational alerts, and production incidents, supporting timely issue resolution and continuous service improvement.</li><li>Collaborates with business users, quality assurance teams, solution architects, infrastructure teams, and other technology functions to deliver integrated technology solutions.</li><li>Develops and supports application programming interfaces (APIs), system integrations, and modern software services that enable efficient business processes and digital capabilities.</li><li>Applies secure software development practices by adhering to information security standards, data protection requirements, secure coding principles, and vulnerability management practices.</li><li>Contributes to the development and support of Artificial Intelligence-enabled features, automation capabilities, and intelligent digital solutions in accordance with established governance and engineering standards.</li><li>Maintains accurate technical documentation, operational procedures, and software artefacts to support application lifecycle management and operational continuity.</li><li>Continuously enhances technical knowledge, adopts emerging technologies, and contributes to improving software engineering practices, development processes, and team capabilities.</li><li>Ensures compliance with the Bank's technology policies, information security standards, regulatory requirements, and software engineering governance frameworks.</li><li>Performs any other responsibilities consistent with the scope of the role, as assigned by the line manager.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related discipline. Equivalent practical experience may be considered.</li><li>Minimum of 4 years of professional software development experience, including experience supporting or developing production applications.</li><li>Experience developing software applications using one or more modern programming languages such as Python, Java, Go, TypeScript, Dart, or similar technologies.</li><li>Experience developing and consuming RESTful APIs, system integrations, and modern software applications.</li><li>Working knowledge of software development lifecycle (SDLC), version control systems, automated testing, and code review practices.</li><li>Experience working with relational databases, SQL, application debugging, and software troubleshooting techniques.</li><li>Familiarity with CI/CD pipelines, containerization technologies, cloud platforms, or managed application environments is preferred.</li><li>Knowledge of secure software development practices, application security principles, and information security standards.</li><li>Exposure to Artificial Intelligence, intelligent automation, or machine learning technologies is considered an advantage.</li><li>Strong analytical, problem-solving, communication, teamwork, and continuous learning skills.</li></ul><p><strong>Applications will be accepted until 16-Aug-2026 at 2:00 P.M Submissions received after this date and time will not be considered</strong></p>

<p>The Senior Software Engineer designs, develops, implements, and supports secure, scalable, and high-quality software solutions that enable the Bank's digital products and technology services. He/She leads the delivery of complex software initiatives, establishes engineering best practices, ensures operational excellence, and collaborates with cross-functional teams to deliver reliable, maintainable, and high-performing technology solutions.The Senior Software Engineer promotes engineering excellence by driving software quality, automation, technical innovation, secure development practices, and continuous improvement while mentoring engineers and contributing to the Bank's technology transformation initiatives. Key Accountabilities: Mentors and coaches software engineers through technical guidance, knowledge sharing, design reviews, and continuous professional development. Drives continuous improvement by identifying opportunities to optimize software architecture, development processes, automation, operational efficiency, and technology practices. Maintains technical documentation, development standards, operational procedures, and knowledge repositories to support sustainable application lifecycle management. Ensures compliance with the Bank's technology policies, information security standards, regulatory requirements, and software engineering governance frameworks. Performs any other responsibilities consistent with the scope of the role, as assigned by the line manager.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related discipline. Equivalent practical experience may be considered.</li><li>Minimum of 6 years of professional software engineering experience, including experience designing, developing, and supporting production-grade applications and services.</li><li>Demonstrated experience delivering scalable enterprise software solutions across the full software development lifecycle.</li><li>Strong experience with one or more modern programming languages such as Python, Java, Go, TypeScript, Dart, or similar technologies.</li><li>Experience developing and supporting RESTful APIs, microservices, distributed applications, and modern software architecture.</li><li>Experience with relational databases, data modelling, API integration, application performance optimization, and cloud-native application development.</li><li>Experience with CI/CD pipelines, DevOps practices, containerization technologies, Infrastructure as Code (IaC), and cloud platforms such as OCI, AWS, Azure, or Google Cloud.</li><li>Knowledge of software engineering best practices including version control, automated testing, secure coding, code reviews, and release management.</li><li>Experience developing or supporting Artificial Intelligence, machine learning, or intelligent automation solutions is preferred.</li></ul>

<p>&nbsp;<strong>Position:</strong> Civil Engineer – Specialized in Earth Works</p><p><strong>Experience Required:</strong> Minimum <strong>5+ years in GCC</strong></p><p>(Earthwork, Infrastructure, Roads, and related projects)</p><p><strong>Eligibility Criteria</strong></p><ul><li>Bachelor’s Degree in Civil Engineering (or equivalent).</li><li>Proven expertise in <strong>earthworks, excavation, grading, compaction, and soil stabilization</strong>.</li><li>Strong knowledge of GCC construction standards and safety regulations.</li><li>Ability to lead site teams and coordinate with consultants/clients.</li><li>Excellent communication and project management skills.</li></ul><p><strong>✨ Benefits Offered</strong></p><ul><li>Attractive salary package (commensurate with experience).</li><li>Free food &amp; accommodation.</li><li>Annual leave with return airfare.</li><li>Career growth opportunities within the organization.</li></ul>