Fire Fighting EngineerJobs

<p>Provide operational and technical engineering support across upstream surface facilities and associated systems, including on plot and off plot installations, during execution, commissioning, start up, and steady state operations. Support troubleshooting, technical assessments, and operational problem solving to ensure safe and efficient plant and field operations. Deliver assigned engineering and operational support tasks, including technical backup for hardware, process systems, utilities, and associated applications. Support pre commissioning, commissioning, start up, and readiness activities for projects, brownfield modifications, and operational improvements. Interface with Operations, Maintenance, Projects, HSE, Supply Chain and other Functions to support technical resolution of operational and execution issues. Support procurement and supply activities from a technical standpoint, including resolving operational and technical clarification matters. Monitor and support readiness to operate activities to ensure assets meet safety, operability, and reliability requirements. Participate in operational reviews, audits, studies, and assurance activities (e.g. ORA, PSSR), as required by project or asset lifecycle stage. Ensure compliance with company engineering standards, operating philosophies, applicable regulations, and best industry practices. Engineer Operation Support: Execute assigned engineering and operational support tasks under supervision. Apply approved engineering procedures, standards, and work practices during execution and operations. Support commissioning, start up, and operational activities as part of a multi disciplinary team. Contribute to studies, reviews, and troubleshooting activities under guidance. Senior Engineer Operation Support: Independently handle multiple operational support and execution scopes across on plot and off plot facilities. Provide technical guidance and mentoring to junior engineers and trainees. Apply hands on experience in upstream surface facilities, including major process units and associated rotating and static equipment. Act as discipline or process lead in technical reviews and studies (e.g. design reviews, HAZOP, RCAs, MOCs). Lead technical input for brownfield modifications, operational improvements, and energy efficiency initiatives. Manage technical aspects of procurement, bid evaluation, and vendor document reviews. Lead Engineer Operation Support: Act as technical authority for operational support across on plot and off plot upstream facilities. Provide strategic technical direction and ensure consistent application of engineering principles across assets and teams. Lead and coordinate engineering and operational support teams during execution, commissioning, and readiness phases. Serve as focal point for ORA, PSSR, commissioning governance, and operational readiness assurance. Own technical risk evaluation, readiness endorsement, and final technical recommendations to management and stakeholders. Support capability development, succession planning, and continuous improvement within Operation Support. Key interactions Internal: Operated Assets functions. External: Contractors, Vendors &amp; Suppliers Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p><p><strong>Desired Candidate Profile</strong></p><h2>Education requirements:</h2><p>Bachelors in Process, Chemical, or equivalent</p><h2>Language requirements :</h2><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><h2>Background and experience:</h2><p>Background 5+ years of relevant experience Adaptable and motivated engineering professional who thrives in complex operational and project environments. Experience in engineering design support and troubleshooting within upstream surface facilities. Exposure to project lifecycle activities including planning, installation, commissioning, start up, and operational support. Demonstrates sound technical judgment with knowledge of engineering standards, material specifications, and applicable international codes. Working knowledge of Quality Assurance, Quality Control, and HSE requirements. Ability to interpret Process diagrams (PFDs, P&amp;IDs), engineering drawings, and OEM manuals.</p><h2>Competencies and skills:</h2><h3>Soft Skills</h3><p>Excellent interpersonal skills with strong multi cultural awareness and sensitivity. Ability to build effective working relationships with internal teams and contractors, with a strong focus on collaboration. Ability to manage multiple priorities in a dynamic, time critical operational environment. Analytical and fact based approach to problem solving and decision making. Strong troubleshooting mindset and result oriented attitude.</p><h3>Technical Skills</h3><p>Computer literate with working knowledge of standard office and engineering applications (e.g. MS Office). Sound technical judgment with practical understanding of upstream Oil &amp; Gas engineering disciplines. Knowledge of resource coordination, interface management, and basic contract administration. Experience in Root Cause Analysis (RCA) and structured problem solving techniques. Ability to read and interpret engineering drawings, specifications, and vendor documentation. Basic understanding of project execution and project management principles. Ability to support the development, review, and modification of technical and operational procedures. Capability to provide technical support, troubleshooting, backup, and operational assistance as required.</p>

<p>Our client is one of the leading providers of Information and Communication Technology (ICT) to service providers currently looking for Automated Operations Engineer (1st Level Operations Telecommunication Managed Services) We are now looking for an Automated Operations Engineer within the Managed Services Ist-level Operations organization that will support the realization of solutions by providing specialized technical expertise on intelligent network systems. As an Automated Operations Engineer, you will be involved in crafting schema objects (facts, attributes, hierarchies, transformations) to develop application objects. You will also craft and create Bl reports and dashboards, write scripts and programs to automate manual work, and improve operations. This role involves maintaining, debugging, troubleshooting systems and software to ensure maximum efficiency.</p><p>Duties &amp; Responsibilities:</p><ul><li>Be responsible for real-time monitoring alarms and performance information on a 24x7 basis</li><li>Perform initial analysis to identify issues follow by restoration if possible (1st line of Support)</li><li>Perform detection, classification, correlation, and accurate escalation of network incidents according to the agreed escalation matrix.</li><li>Being able to work with a variety of tools</li><li>Be able to perform Alarm Surveillance, Trouble T-icket Management, Change Management Support for 1st Level Service Restoration Activities.</li><li>Be able to manage complaints from Customer Care.</li><li>Be able to ensure Adherence to all Processes.</li><li>Be responsible to escalate within the department / group as well as to service support units (ASP) / supplier partner functions so that service layer may be maintained at specified level.</li><li>Be able to execute Front office activities and routines according to schedules defined by Shift Team Leaders/NOC Manager.</li><li>Be able to send/receive/follow up with trouble reports sent to the delivery units/supplier/customer.</li><li>Be responsible for Remote Service Corrective, Preventive Maintenance.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Electrical Engineering / Telecommunication Engineering / Computer Science / Computer Engineering or equivalent.</li><li>Minimum 2-4 years of experience in Operation &amp; Maintenance implementation, Fault management/ performance management</li><li>Must have experience in working on UOC OSS tools</li><li>Good Multi-Vendor System knowledge</li><li>Proficient command of English is required</li><li>Experience in Performance KPls &amp; CEM KQls will be plus</li><li>Hands-on experience in automation will be advantageous</li><li>Monitoring of all alarms on RAN, Transmission, Core via NMS Nodes when required.</li></ul><p>Professional/Technical Competencies:</p><ul><li>Proficient knowledge of Access, Core, and IP/Transport Networks</li><li>Must be skilled in the network topology, its traffic handling capabilities and traffic characteristics.</li><li>Efficient knowledge of network performance/configuration parameters and their interpretation and use is critical.</li><li>Must be network service/performance focused</li><li>Adept expertise in network operation processes and interfaces</li><li>Advanced knowledge of operating network implementation/integration processes</li><li>Experience in the field of Mobile Network O&amp;M is essential</li><li>Agility and the vigor to work optimally in a fast-paced environment</li><li>The ability to direct a team and do optimum shift workload distribution</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Civil Inspector to oversee and verify civil works for a Combined Cycle Gas Turbine (CCGT) power plant during construction and pre-commissioning. The role ensures compliance with drawings, specifications, ITPs, method statements, and applicable standards , with a strong focus on quality, safety, and timely delivery . You will work closely with the EPC/Contractor, Owner s Engineer, and HSE teams to ensure all civil and structural works meet project requirements.</p><p>Site Supervision &amp; Quality Control</p><ul><li>Inspect and supervise civil and structural works : foundations (GT/HRSG/STG/transformers), pedestals, pipe racks, control building, cooling towers/basins, chimneys/stacks, tanks, equipment foundations, culverts, underground utilities (stormwater, sewer, potable water, firewater), approach roads, pavements, trenching/backfilling, fencing, and buildings/ancillaries.</li><li>Verify compliance with approved IFC drawings , project specifications , ITPs , method statements , and codes/standards (e.g., ACI, ASTM, AISC/BS EN, BS 8007/BS 8110/Eurocodes where applicable).</li><li>Monitor and witness concrete works (formwork, rebar fixing, embed plates, anchor bolts, grouting), earthworks (compaction per Proctor/field density), asphalt , waterproofing , structural steel erection , painting/coating , rebar , precast , and piling (if applicable).</li><li>Review and approve material deliveries against MARs and MTCs ; ensure traceability and proper storage.</li><li>Coordinate material testing with labs: slump, compressive strength, trial mixes, FDT, plate load tests, rebar tensile/bend tests, weld NDT (if scope overlaps), coating DFT checks, etc.</li></ul><p>Documentation &amp; Reporting</p><ul><li>Implement and maintain inspection records , RFI/WIR logs, checklists , daily site reports , NCRs , SNCs , CARs , and punch lists .</li><li>Review and comment on method statements , ITPs , shop drawings , as-builts , and red-line markups .</li><li>Support QA/QC audits , root-cause analysis , and preventive/corrective actions .</li><li>Assist with turnover dossiers , as-built packages , and handover to commissioning for civil scope.</li></ul><p>Coordination &amp; HSE</p><ul><li>Interface with EPC/contractors , Owner s Engineer , client representatives , and multi-discipline teams (mechanical, electrical, I&amp;C) to plan civil works and resolve clashes (cable trenches vs foundations/utilities, elevations, sleeves, embeds).</li><li>Enforce HSE compliance per project HSE plan and Oman regulations; conduct toolbox talks related to civil activities; verify permits to work (PTW), lifting plans, excavations/shoring, confined space, and working at height controls.</li><li>Ensure temporary works design/inspection compliance (scaffolding tags, formwork stability, access platforms, edge protection).</li></ul><p>Schedule &amp; Progress</p><ul><li>Track daily/weekly progress against look-ahead schedules; flag risks/constraints (drawings, materials, manpower, plant).</li><li>Support readiness for commissioning by ensuring civil areas are defect-free and accessible; close punch items.</li></ul><p>Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma or Bachelor s in Civil Engineering or equivalent.</li><li>5 10 years of civil site supervision/inspection experience, with at least 3+ years on power plants (preferably CCGT or large industrial process plants).</li><li>Strong QA/QC background with hands-on experience in ITPs, method statements, RFIs, NCRs , and material testing .</li><li>Proven experience in: heavy foundations , equipment pedestals , anchor bolt alignment , grouting , underground utilities , roads &amp; drainage , structural steel , coatings , and buildings/architectural finishes .</li><li>Familiarity with relevant standards: ACI / ASTM / BS EN / AISC / Eurocodes , BS 8007 , BS 8110 (or current equivalents), ASD/ LRFD basics for steel verification.</li><li>Proficient in reading IFC drawings , rebar schedules , setting out , and as-built verification .</li><li>Excellent written/verbal communication in English ; ability to generate clear inspection reports.</li></ul><p></p></section>

<p>Provide robust production-engineering expertise to the subsurface development of the Operated Assets Subsurface function, under the direction of the TL Production Engineer BISAT Development, by supporting field-based production activities, planning production, well design, and completion, and applying production-engineering practices to well and reservoir management, well design and completion, and Integrated Production Modelling (IPM), in order to optimise well and field performance and support the safe, reliable, and efficient production of significant oil and gas deposits.</p><p>The position will act in accordance with the OQEP's Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani's government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><ul><li>Provide robust technical production-engineering expertise, support, and innovative solutions for the execution of the production-engineering process, ensuring common engineering principles and concepts are applied; may handle a large scope of activities simultaneously and provide guidance to junior engineers and trainees.</li><li>Optimise well production through daily well-surveillance monitoring and troubleshooting of well-performance issues.</li><li>Hold direct responsibility for a range of activities including well surveillance, frac-job design and implementation, well testing, artificial-lift selection and design, completion and workover design and execution, well-intervention proposals, and well-stimulation design and execution.</li><li>Analyse and interpret field information using available engineering tools, making recommendations to optimise production and support field development.</li><li>Contribute to monthly production planning and reservoir-surveillance planning as required.</li><li>Hold direct responsibility for monitoring well failure rates, conducting the required Root Cause Failure Analysis (RCFA), and recommending solutions to reduce such rates.</li><li>Participate in integrated field studies for maturing hydrocarbon resources.</li><li>Evaluate well and reservoir performance and recommend production-improvement opportunities.</li><li>Provide production-engineering input to business planning and well proposals, and participate in the preparation of development plans and optimisation studies to maximise project value.</li><li>Work closely with Reservoir Engineers and Geologists to maximise the value of assigned assets.</li><li>Ensure all evaluations are documented and related data is handled in accordance with the Company's Data Management Standards.</li><li>Work safely and proactively promote the Company's occupational health, safety, security, and environment culture, ensuring compliance with HSE and process-safety requirements and participating in HSE programs.</li><li>Fulfil stand-by / on-call duties when required.</li><li>Perform other similar duties as assigned by the TL Production Engineer BISAT Development.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: TL Production Engineer BISAT Development and the Subsurface &amp; Operation 60&amp;48 team, and enabling functions (Reservoir Engineering, Geoscience, Well Delivery, Operations, Facilities, and HSSE).</li><li>External: Contractors, service providers, and technical consultants; OQ Group (parent-company interfaces, as applicable).</li></ul><p><strong>Notable Working Conditions</strong></p><p>Combination of field operational environment and office-based technical work; regular presence at well sites and operating facilities to support well surveillance, production troubleshooting, well interventions, stimulation, workover activities, and production optimisation. The role may require working in remote operational areas, exposure to live production environments, and participation in stand-by / on-call duties as required.</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><ul><li>A minimum of 6+ years' relevant experience in production engineering within the upstream oil and gas industry.</li><li>Experience in production optimisation, well surveillance, and troubleshooting of well-performance issues.</li><li>Experience in artificial-lift selection and design, completion and workover design, well intervention, and stimulation.</li><li>Experience in well testing, frac-job design, and RCFA.</li><li>Proficiency in industry-standard production-engineering and nodal-analysis tools (e.g., PROSPER/GAP or equivalent).</li><li>Good understanding of reservoir behaviour, production operations, and completion procedures.</li><li>Experience working in a multidisciplinary team environment with Reservoir Engineers and Geologists.</li><li>Strong interpersonal and communication skills (verbal and written), with proficiency in written and spoken English.</li></ul><p><strong>Behavioral / Leadership Competencies:</strong></p><ul><li>Analytical thinking and sound engineering judgement.</li><li>Collaboration across multidisciplinary teams.</li><li>Effective communication of technical insights and risks.</li><li>Proactive problem-solving and continuous improvement.</li><li>Accountability and results orientation.</li><li>Commitment to HSSE, process safety, integrity, and high technical standards.</li></ul><p><strong>Technical Competencies:</strong></p><ul><li>Production optimisation and well-performance management.</li><li>Artificial lift, completion, and workover design.</li><li>Well intervention, stimulation, and frac-job design.</li><li>Well surveillance, testing, and RCFA.</li><li>Integrated Production Modelling (IPM) and nodal analysis.</li><li>Data management and technical reporting.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><ul><li>Bachelor s degree in Petroleum Engineering or equivalent</li><li>Master s degree (preferred)</li><li>Language requirements Excellent knowledge of written, read, and spoken English (required).</li></ul><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><ul><li>A minimum of 6+ years' relevant experience in production engineering within the upstream oil and gas industry.</li><li>Experience in production optimisation, well surveillance, and troubleshooting of well-performance issues.</li><li>Experience in artificial-lift selection and design, completion and workover design, well intervention, and stimulation.</li><li>Experience in well testing, frac-job design, and RCFA.</li><li>Proficiency in industry-standard production-engineering and nodal-analysis tools (e.g., PROSPER/GAP or equivalent).</li><li>Good understanding of reservoir behaviour, production operations, and completion procedures.</li><li>Experience working in a multidisciplinary team environment with Reservoir Engineers and Geologists.</li><li>Strong interpersonal and communication skills (verbal and written), with proficiency in written and spoken English.</li></ul><p><strong>Behavioral / Leadership Competencies:</strong></p><ul><li>Analytical thinking and sound engineering judgement.</li><li>Collaboration across multidisciplinary teams.</li><li>Effective communication of technical insights and risks.</li><li>Proactive problem-solving and continuous improvement.</li><li>Accountability and results orientation.</li><li>Commitment to HSSE, process safety, integrity, and high technical standards.</li></ul><p><strong>Technical Competencies:</strong></p><ul><li>Production optimisation and well-performance management.</li><li>Artificial lift, completion, and workover design.</li><li>Well intervention, stimulation, and frac-job design.</li><li>Well surveillance, testing, and RCFA.</li><li>Integrated Production Modelling (IPM) and nodal analysis.</li><li>Data management and technical reporting.</li></ul>

<p>The Senior Power System Secondary Engineer acts as the technical authority on behalf of the project developer, providing independent oversight, review, and verification of all secondary systems engineering across utility-scale renewable energy plants (Solar PV, Wind) and Battery Energy Storage Systems (BESS). The role is pivotal in ensuring that designs delivered by EPC contractors and specialist consultants are technically sound, safe, cost-effective, and fully compliant with International Best Practices, utility / TSO requirements, and applicable International Standards (IEC, IEEE/ANSI). </p><br><p>Design Review & Verification</p><ul><li><p>Lead the review and verification of all secondary design deliverables — including Single Line</p></li></ul><p>Diagrams (SLDs), Protection & Metering Diagrams (PMDs), Block Logic Diagrams (BLDs), AC/DC</p><p>schematics, and LV System Design Documents — for HV substations and renewable plants.</p><ul><li><p>Verify protection and control philosophies, including relay settings, selectivity analyses, and</p></li></ul><p>coordination studies (short-circuit calculations, CT/VT sizing) prepared by consultants and EPC</p><p>contractors.</p><ul><li><p>Review and approve interlocking schemes, bay-level logic, and station-level automation across</p></li></ul><p>switchgear, transformers, feeders, and renewable energy plant interfaces.</p><p>Substation Automation & SCADA</p><ul><li><p>Approve substation automation and SCADA architectures, ensuring correct implementation of IED</p></li></ul><p>logic, signal lists, and interlocking schemes at bay and station levels.</p><ul><li><p>Oversee the integration and configuration of communication protocols — IEC 61850</p></li></ul><p>(GOOSE/SV/MMS), IEC 60870-5-104, and DNP3 — governing data flow between Plant Power</p><p>Controllers (PPC/EMS), substations, and utility control centers.</p><ul><li><p>Review IED configurations, substation HMI displays, and historian / data management architectures</p></li></ul><p>for completeness and compliance.</p><p>Telecommunications & Cybersecurity</p><ul><li><p>Review and validate communication and telecommunication architectures, including managed</p></li></ul><p>network design (VLANs, PRP/HSR redundancy), cybersecurity policies (IEC 62351 / NERC-CIP</p><p>aligned), and tele-protection performance requirements.</p><p>Standards, Compliance & Grid Code Adherence</p><ul><li><p>Ensure strict adherence to international standards and grid codes (IEC, IEEE/ANSI) by performing</p></li></ul><p>technical audits and vetting technical submissions to Transmission / Distribution System Operators</p><p>(TSO/DSO).</p><ul><li><p>Manage technical interfaces and coordinate between EPC contractors, engineering consultants,</p></li></ul><p>OEMs, and the grid operator to ensure a coherent and optimized secondary systems design.</p><p>Testing, Commissioning & Project Governance</p><ul><li><p>Provide technical governance during critical project phases, including witnessing Factory</p></li></ul><p>Acceptance Tests (FAT) and Site Acceptance Tests (SAT), and reviewing commissioning</p><p>procedures for all secondary systems.</p><ul><li><p>Review and approve test plans, testing protocols, punch lists, and commissioning records to ensure</p></li></ul><p>safe energization of HV substations and plant systems.</p><ul><li><p>Act as the Owner’s Engineer representative in te</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education</p><ul><li><p>Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or a closely related field.</p></li><li><p>Professional Engineering registration (PE / CEng or equivalent) is an advantage.</p></li></ul><p>Experience</p><ul><li><p>8+ years of engineering experience with a demonstrable focus on substation secondary systems</p></li></ul><p>design and delivery.</p><ul><li><p>Significant experience in a developer, owner’s engineer, or utility role with direct responsibility for</p></li></ul><p>managing and challenging EPC contractor deliverables.</p><ul><li><p>Proven track record on grid-connected utility-scale renewable energy projects (Solar PV, Wind)</p></li></ul><p>and/or Battery Energy Storage Systems (BESS).</p><ul><li><p>Experience working across the full project lifecycle from FEED and detailed design through to FAT,</p></li></ul><p>SAT, and commercial operation</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>EMPLOYEE JOB DESCRIPTION</b></p> <p> </p> <p>JOB PURPOSE:</p> <p> </p> <p>The Commercial Control Engineer is responsible for managing and administering contracts throughout their life cycle from tendering and evaluation to award, execution, variation control, and close-out. The role ensures compliance with company policies, legal requirements, and contractual obligations while driving financial discipline through strict budget monitoring, timely payment processing, and subcontractor performance management.</p> <p> </p> <p>KEY ACCOUNTABILITIES:</p> <p> </p> <p>Description</p> <p> </p> <p>Contract Preparation &amp; Tendering </p> <p> </p> <p>Prepare tender documents, scopes of work, and commercial terms.</p> <p>Coordinate pre bid meetings and communication with bidders.</p> <p>Conduct technical and commercial evaluations of contractor proposals.</p> <p>Support negotiation and recommendation for contract award</p> <p>Financial Control &amp; Monitoring</p> <p> </p> <p>Invoice Management: Oversee the verification and processing of contractor invoices to ensure payments are made on time.</p> <p>Consumption Tracking: Rigorously monitor contract consumption vs. Cap value to ensure expenditures remain within approved limits.</p> <p>Cost Optimization: Proactively explore subcontract cost-saving opportunities and value engineering initiatives.</p> <p>Subcontractor Evaluation</p> <p> </p> <p>Monthly Reporting: Conduct monthly subcontractor evaluations to assess quality of work, schedule adherence, and HSE compliance.</p> <p>Performance Accountability: Maintain subcontractor scorecards and provide regular reports to the Production Control Department Head on delivery performance.</p> <p>Change Management &amp; Commercial Support</p> <p> </p> <p>Review and evaluate variations, claims, and extensions of time.</p> <p>Prepare cost assessments and justification reports for variations.</p> <p>Provide commercial and contractual support to the contract holder and technical teams.</p> <p>Support annual budgeting and cost control activities.</p> <p>Compliance &amp; Documentation</p> <p> </p> <p>Administer contracts in accordance with company policies and established procedures.</p> <p>Ensure contractors comply with contractual terms, deliverables, timelines, and safety requirements.</p> <p>Maintain accurate contract documentation, correspondence, and records.</p> <p>Participate in audits and provide required documentation as needed</p> <p>General Support</p> <p> </p> <p>Perform any other duties or tasks as assigned by the Line Manager to support the department's objectives.</p> <p>Policies, Systems, Processes &amp; Procedures</p> <p> </p> <p>Adhere to all relevant departmental policies, processes, standard operating procedures, and instructions to ensure work is carried out in a controlled and consistent manner.</p> <p>Quality, Health, Safety, &amp; Environment </p> <p> </p> <p>Comply with all applicable quality, health, safety, and environmental procedures and requirements.</p> <p>Ensure that performance reporting and analysis do not compromise safety, quality, or compliance standards.</p> <p>COMMUNICATIONS &amp; WORKING RELATIONSHIPS:</p> <p> </p> <p>Internal: </p> <p> </p> <p>Production Division, Finance, Supply Chain, and Marketing</p> <p>QUALIFICATIONS, EXPERIENCE &amp; SKILLS:</p> <p> </p> <p>Qualifications &amp; Experience</p> <p> </p> <p>Bachelor s degree in Engineering, Supply Chain, Business, or related field.</p> <p>Minimum 6 years of experience in commercial, contract engineer, procurement, or project controls.</p> <p>Experience in maritime fields is preferred.</p> <p>Strong understanding of contract laws, contract drafting, and commercial terms.</p> <p>Proficiency in MS Office and ERP/contract management systems.</p> <p>Preferred Certifications</p> <p> </p> <p>MCIPS or CPCM highly preferred.</p> <p>Certification in FIDIC Contract Management is a significant advantage.</p> <p>Project Management certification (e.g., PMP).</p> <p>Membership in a recognized professional body (e.g., RICS, CIPS, or Omani Society of Engineers).</p> <p>Skills &amp; Competencies </p> <p> </p> <p>Strong analytical and negotiation skills.</p> <p>Excellent communication and stakeholder management abilities.</p> <p>High attention to detail and problem solving capabilities.</p> <p>Ability to manage multiple contracts simultaneously.</p> <p>Strong ethics, integrity, and professionalism.</p> <p>KEY PERFORMANCE INDICATORS (KPIS)</p> <p> </p> <p>On-Time Invoicing: Percentage of invoices verified and processed within the agreed timeframe.</p> <p>Budget Integrity: Accuracy of monitoring consumption vs. Cap value (prevention of overruns).</p> <p>Cost Savings: Tangible financial savings identified through subcontract optimization.</p> <p>Evaluation Compliance: Consistent submission of monthly subcontractor performance reports.</p> <p>Contractual Risk: Reduction in risks and avoidance of formal disputes.</p> <p><br></p> <p> </p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are hiring an experienced Water Desalination Plant Engineer for a reputed company in Oman. The ideal candidate should have hands-on experience in the installation, operation, maintenance, and design of water desalination plants, along with strong mechanical engineering knowledge.</p><p>Key Responsibilities</p><ul><li>Install, assemble, and commission water desalination plants.</li><li>Perform operation and maintenance of desalination systems.</li><li>Read and interpret technical drawings and engineering documents.</li><li>Prepare technical reports and maintenance records.</li><li>Troubleshoot plant equipment and ensure smooth operations.</li><li>Follow safety and quality standards during all activities.</li></ul><p>Salary: 74000 INR Per Month</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements</p><ul><li>Bachelor's Degree in Mechanical Engineering.</li><li>Minimum 4 years of experience in water desalination plant operation and maintenance.</li><li>Experience in installation and design of desalination plants.</li><li>Ability to read technical drawings and prepare reports.</li><li>Good English communication skills.</li><li>Age: Below 40 years.</li></ul><p></p></section>

<ul><li><p>To manage multi-discipline projects from the initiation till the close-out, within schedule and cost to an acceptable quality.</p></li><li><p>Shall have worked as a single-point responsible project engineer for a medium size oil/gas project or managing multiple smaller projects concurrently. </p></li><li><p>Shall have proven capabilities in managing and motivating all disciplines to deliver projects.</p></li><li><p>Shall demonstrate sound general management skills in all aspects of the work, be extremely well organised, methodical</p></li><li><p>Single point responsible for the efficient execution of assigned projects to deliver within schedule, cost and at an acceptable quality. </p></li><li><p>Develop scope of work handed over by the Company project engineer for each project to achieve the specified deliverables. </p></li><li><p>Develop cost and schedule control estimates and project key control documentation.</p></li><li><p>Responsible for management of all project reporting, interface definition, interface management, liaison with Company project engineers, maintain and control project variance logs, project audit reports, managing close-out of audit action items, early highlight and resolution of project issues.</p></li><li><p>Exercising control over manpower and material resources in order to execute the project within budget, schedule, quality and HSE requirements. </p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Degree in a relevant engineering discipline -<strong><u> Preferable Mech.</u></strong></p><p>membership of internationally accepted applicable professional Institute. i.e PMP</p><p>Must be PC literate & Good communication skills</p><p>Hands on experience on planning software tools such as <strong><em>PRIMAVERA or equivalent.</em></strong></p><p>Experience in project management of sour facilities</p><p>Good interpersonal & communication skills and an extrovert.</p><p>Shall be able to form, smoothly interact and motivate a team within a matrix type organisation</p><p>Promote a planning execute - measure – feedback work loop method in project engineering.</p><p><br></p>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Key responsibilities</h4> <p>Provide project management support and mechanical engineering guidance for industrial facilities and infrastructure projects.<br> Support the development and maintenance of engineering standards, specifications, and procedures.<br> Monitor contractor performance to ensure work is completed in accordance with approved drawings, specifications, quality standards, and project requirements.<br> Manage and control site activities to achieve project objectives within approved schedule and budget constraints.<br> Prepare and present project progress reports, forecasts, and status updates to management.<br> Lead projects through all project phases, from concept and scope development through technical evaluation, execution, commissioning, and handover.<br> Coordinate engineering activities and pre-operational testing required for successful commissioning and start-up.<br> Evaluate proposed projects and provide technical recommendations.<br> Prepare technical reports, specifications, and supporting project documentation.<br> Monitor and assess contractor performance and compliance with project requirements.<br> Follow instructions and guidance provided by the designated Project Manager or Engineer-in-Charge.<br> Ensure compliance with applicable health, safety, environmental, and quality standards throughout project execution.</p> <h4>Qualifications</h4> <p>Bachelor's degree in Mechanical Engineering.<br> Master's degree in Engineering, Management, or a Project Management certification is advantageous.<br> Chartered Engineer status is considered an advantage.</p> <h4>Experience & skills</h4> <p>Minimum 10 years of project, design, and engineering experience within heavy industrial environments.<br> Experience in brownfield industrial projects is preferred.<br> Strong knowledge of project management principles and practices.<br> Proficiency in SAP and Microsoft Office applications (Word, Excel, PowerPoint).<br> Working knowledge of engineering and drafting software such as AutoCAD.<br> Experience with project planning software such as Microsoft Project and/or Primavera.<br> Sound understanding of budgets, contractual requirements, business processes, and organizational decision-making.<br> Experience supervising installation and commissioning of bulk material handling equipment, including conveyors and associated static and rotating equipment.<br> Proven experience managing contractors and multidisciplinary project teams.<br> Strong written and verbal communication skills, including technical reporting.<br> Demonstrated decision-making, coordination, and stakeholder management capabilities.<br> Knowledge of standard contract terms and conditions.<br> Working knowledge of industrial safety practices and project execution requirements.</p> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.<br> And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.<br> And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<p>Provide Operational Support at OQEP, Operated Assets Operations Support, under TL Operation Support scope s by delivering of a best practice operational strategies and results; in order to ensure safe and efficient operations at the site.</p><p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><h2>Main tasks and responsibilities</h2><h3>Common for All Levels</h3><p>Provide operational and technical engineering support across upstream surface facilities and associated systems, including on plot and off plot installations, during execution, commissioning, start up, and steady state operations.</p><p>Support troubleshooting, technical assessments, and operational problem solving to ensure safe and efficient plant and field operations.</p><p>Deliver assigned engineering and operational support tasks, including technical backup for hardware, process systems, utilities, and associated applications.</p><p>Support pre commissioning, commissioning, start up, and readiness activities for projects, brownfield modifications, and operational improvements.</p><p>Interface with Operations, Maintenance, Projects, HSE, Supply Chain and other Functions to support technical resolution of operational and execution issues.</p><p>Support procurement and supply activities from a technical standpoint, including resolving operational and technical clarification matters.</p><p>Monitor and support readiness to operate activities to ensure assets meet safety, operability, and reliability requirements.</p><p>Participate in operational reviews, audits, studies, and assurance activities (e.g. ORA, PSSR), as required by project or asset lifecycle stage.</p><p>Ensure compliance with company engineering standards, operating philosophies, applicable regulations, and best industry practices.</p><h3>Engineer Operation Support</h3><p>Execute assigned engineering and operational support tasks under supervision.</p><p>Apply approved engineering procedures, standards, and work practices during execution and operations.</p><p>Support commissioning, start up, and operational activities as part of a multi disciplinary team.</p><p>Contribute to studies, reviews, and troubleshooting activities under guidance.</p><h3>Senior Engineer Operation Support</h3><p>Independently handle multiple operational support and execution scopes across on plot and off plot facilities.</p><p>Provide technical guidance and mentoring to junior engineers and trainees.</p><p>Apply hands on experience in upstream surface facilities, including major process units and associated rotating and static equipment.</p><p>Act as discipline or process lead in technical reviews and studies (e.g. design reviews, HAZOP, RCAs, MOCs).</p><p>Lead technical input for brownfield modifications, operational improvements, and energy efficiency initiatives.</p><p>Manage technical aspects of procurement, bid evaluation, and vendor document reviews.</p><h3>Lead Engineer Operation Support</h3><p>Act as technical authority for operational support across on plot and off plot upstream facilities.</p><p>Provide strategic technical direction and ensure consistent application of engineering principles across assets and teams.</p><p>Lead and coordinate engineering and operational support teams during execution, commissioning, and readiness phases.</p><p>Serve as focal point for ORA, PSSR, commissioning governance, and operational readiness assurance.</p><p>Own technical risk evaluation, readiness endorsement, and final technical recommendations to management and stakeholders.</p><p>Support capability development, succession planning, and continuous improvement within Operation Support.</p><h2>Key interactions</h2><p>Internal: Operated Assets functions.</p><p>External: Contractors, Vendors &amp; Suppliers</p><h2>Notable Working Conditions.</h2><p>Field Operations and office environment, Moderate to intensive computer screen use.</p><p><strong>Desired Candidate Profile</strong></p><h2>Education requirements</h2><p>Bachelors in Process, Chemical, or equivalent</p><h2>Language requirements</h2><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><h2>Background and experience</h2><h3>Competencies and skills</h3><h4>Background</h4><p>5+ years of relevant experience</p><p>Adaptable and motivated engineering professional who thrives in complex operational and project environments.</p><p>Experience in engineering design support and troubleshooting within upstream surface facilities.</p><p>Exposure to project lifecycle activities including planning, installation, commissioning, start up, and operational support.</p><p>Demonstrates sound technical judgment with knowledge of engineering standards, material specifications, and applicable international codes.</p><p>Working knowledge of Quality Assurance, Quality Control, and HSE requirements.</p><p>Ability to interpret Process diagrams (PFDs, P&amp;IDs), engineering drawings, and OEM manuals.</p><h4>Soft Skills</h4><p>Excellent interpersonal skills with strong multi cultural awareness and sensitivity.</p><p>Ability to build effective working relationships with internal teams and contractors, with a strong focus on collaboration.</p><p>Ability to manage multiple priorities in a dynamic, time critical operational environment.</p><p>Analytical and fact based approach to problem solving and decision making.</p><p>Strong troubleshooting mindset and result oriented attitude.</p><h4>Technical Skills</h4><p>Computer literate with working knowledge of standard office and engineering applications (e.g. MS Office).</p><p>Sound technical judgment with practical understanding of upstream Oil &amp; Gas engineering disciplines.</p><p>Knowledge of resource coordination, interface management, and basic contract administration.</p><p>Experience in Root Cause Analysis (RCA) and structured problem solving techniques.</p><p>Ability to read and interpret engineering drawings, specifications, and vendor documentation.</p><p>Basic understanding of project execution and project management principles.</p><p>Ability to support the development, review, and modification of technical and operational procedures.</p><p>Capability to provide technical support, troubleshooting, backup, and operational assistance as required.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Bachelor’s degree in<strong> Electronics Engineering</strong>, or a related field.</li><li>Open-minded, Innovative, Adaptable, and Hardworking willing to handle challenging tasks.</li><li>Work closely with IT, software, and other engineering teams to deliver comprehensive solutions.</li><li>Implementing secure network connections for IoT-based ELV systems.</li><li>Strong knowledge of <strong>networking</strong>, including <strong>designing Networks like LANs VLANs, Configure Switches and Routers</strong> and knowledge in QoS, and IP-based system integration. </li><li>Design and integrate<strong> audio, lighting, and LED systems</strong>, ensuring performance, compliance, and detailed technical documentation for projects. (<em>Preferred</em>)</li><li>Configure and optimize <strong>PAS (Public Address System)</strong>, oversee <strong>DJ system setup</strong>, and troubleshoot complex audio issues to ensure seamless event audio integration. (<em>Preferred</em>)</li><li>Design <strong>stage lighting with DMX, engineer LED screen setups</strong>, and ensure seamless compatibility and synchronization between lighting and visuals. (<em>Preferred</em>)</li><li>Strong knowledge of <strong>networking</strong>, including <strong>designing Networks like LANs VLANs, Configure Switches and Routers</strong> and knowledge in QoS, and IP-based system integration. </li><li>Manage project planning, implementation, and support; coordinate stakeholders; and deliver training and documentation for successful, on-time, and budget-compliant delivery.</li><li>Proven experience in <strong>audio-visual system design, implementation, and maintenance</strong>. - Preferred</li><li>Certifications in relevant areas (e.g., AVIXA CTS-D, Cisco(<strong>CCIE, CCNA, CCNP, CWNA)</strong>, Crestron)- Preferred</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>We are seeking an experienced and dynamic <strong>Audio-Visual/ Lighting/Network/ELV Engineer</strong> to design, implement, and maintain advanced <strong>AV and ELV systems</strong> for events, installations, and permanent setups and also knowledge in Networking. The ideal candidate will have a strong technical background in <strong>audio systems, stage lighting, LED screens, and networking</strong>, complemented by expertise in electrical and electronic engineering.</p><p></p></section>

<p>We are looking for Network Engineer:</p><br><p>Bachelor’s in Networking/IT, 3–5 years’ networking experience. ITIL Foundation, CCNA and CCNP are required.</p><p><strong>Desired Candidate Profile</strong></p><p>.</p>

<p><strong>JOB DESCRIPTION</strong></p><p><strong>BASIC INFORMATION</strong></p><ul><li>Position Name: Mechanical Technician</li><li>Function: Operations &amp; Maintenance</li><li>Job Code: </li><li>Department: Plant</li><li>Section: Maintenance</li><li>Location: Plant</li><li>Reporting To (Functional Title): Mechanical Maintenance Lead</li><li>Number of Direct Reports: N/A</li></ul><p><strong>ROLE PURPOSE</strong></p><p>is responsible for carrying out preventive, predictive, and corrective maintenance activities on mechanical equipment within the power and water plant. The role ensures the reliability, availability, efficiency, and safe operation of generating units, desalination systems, auxiliary equipment, and balance-of-plant assets.</p><p><strong>ACCOUNTABILITIES AND RESPONSIBILITIES</strong></p><ul><li>Troubleshooting Faulty Machinery: Stay aware of anything unusual, troubleshoot faulty machinery and diagnose the root cause of the malfunction using diagnostic tools and problem-solving abilities.</li><li>Mechanical Preventive and Corrective maintenance: performing preventive, predictive, and corrective maintenance on mechanical equipment to ensure the safe, reliable, and efficient operation of the power and water plant. This includes inspecting, troubleshooting, repairing, and overhauling rotating and static equipment such as pumps, compressors, valves, fans, heat exchangers, gearboxes, and associated auxiliary systems.</li><li>Contractor Management: Coordinate and supervise contractor personnel performing mechanical maintenance activities within the plant. Inspect completed contractor work to verify compliance with technical specifications, maintenance standards, and plant requirements.</li><li>Collaboration on Complex Mechanical Issues: Ensure maintenance procedures reflect current best practices, OEM recommendations, safety requirements, and plant operational needs.</li><li>SOP &amp; Manual Update and Development: Support the development, review, and periodic update of Standard Operating Procedures (SOPs), maintenance procedures, and equipment manuals for mechanical systems and equipment. Ensure SOPs and maintenance documentation are aligned with OEM recommendations, industry best practices, plant requirements, and HSE standards.</li><li>Document Maintenance and Repairs Daily Log: Complete work orders and maintenance records accurately using SAP, Maximo, or other CMMS systems. Prepare maintenance reports and equipment history records. Update equipment inspection checklists and maintenance logs.</li><li>Coaching New Hires: Coach newly hired/Junior Mechanical Technicians and teach them various policies, procedures, and repair techniques.</li><li>Safety Compliance: Comply with all plant safety procedures, permit-to-work systems, and lockout/tagout (LOTO) requirements. Ensure proper use of Personal Protective Equipment (PPE). Participate in toolbox talks, safety meetings, and risk assessments. Report hazards, near misses, and incidents promptly.</li><li>Technical Skills: Mechanical troubleshooting and fault diagnosis. Pump and compressor maintenance. Turbine auxiliary systems maintenance. Mechanical seal and bearing replacement. Shaft alignment using laser alignment tools. Reading and interpreting P&amp;IDs, engineering drawings, and manuals. Hydraulic and pneumatic systems maintenance. Knowledge of condition monitoring techniques. Familiarity with SAP PM, Maximo, or similar maintenance systems.</li><li>Health, Safety &amp; Quality: Comply with all relevant health, safety and quality requirements, to guarantee employee safety and legislative compliance.</li><li>Continuous Improvement: Participate in continuous improvement initiatives to enhance equipment reliability, plant availability, and maintenance efficiency. Share technical knowledge and lessons learned with team members to promote continuous learning and development.</li></ul><p><strong>COMMUNICATION CHANNELS</strong></p><ul><li>Internal: Mechanical Maintenance Lead, Maintenance Team, Operations Team</li><li>External: Contractors, Suppliers</li></ul><p><strong>ROLE REQUIREMENTS</strong></p><p><strong>Educational &amp; Professional Qualifications and Experience</strong></p><ul><li>Minimum Qualifications: Diploma in Mechanical Engineer from a technical or vocational college</li><li>Proficiency in English is a must, Arabic is a plus</li><li>Minimum Experience: 3 to 6 years of direct and relevant experience in power generation, desalination, water treatment, utilities</li><li>Skills and Competencies: Generic Skills: Communication skills, Computer literacy (ERP), Microsoft tool (Excel, PowerPoint, Word)</li><li>Job Specific Skills: Mechanical skills, Troubleshooting skills, Detail-Orientation, Problem-Solving skills, Teamwork, Knowledge in OSHA standards</li><li>Behavioural Competencies: People Centricity, Integrity, Agility, Collaboration</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in Mechanical Engineer from a technical or vocational college</li><li>Proficiency in English is a must, Arabic is a plus</li><li>3 to 6 years of direct and relevant experience in power generation, desalination, water treatment, utilities</li><li>Generic Skills: Communication skills, Computer literacy (ERP), Microsoft tool (Excel, PowerPoint, Word)</li><li>Job Specific Skills: Mechanical skills, Troubleshooting skills, Detail-Orientation, Problem-Solving skills, Teamwork, Knowledge in OSHA standards</li><li>Behavioural Competencies: People Centricity, Integrity, Agility, Collaboration</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Responsibilities:</strong></p> <ul> <li>Support supervision teams with the review of the contractor s work program during the pre-construction phase, as needed</li> <li>Support supervision teams with the review of contractors submittals, including staffing proposals, organization charts, shop drawings, method statements, project procedures, traffic management plans, etc., as needed</li> <li>Maintain familiarity with construction drawings, specifications, standard details and all other information related to the standard workmanship and quality of works</li> <li>Closely work with Planning Engineers for monitoring contractors daily activities on site (e.g. concrete pouring, installations, etc.) and resource allocation against plans</li> <li>Conduct inspection on construction works according to Requests for Inspections submitted by contractors and highlight reasons for rejection of works, if any</li> <li>Conduct quality inspections on contractors and subcontractors with the QA / QC Engineer and identify and raise quality issues, as needed</li> <li>Monitor the implementation of quality non-conformities action plans on construction sites</li> <li>Support HSSE Engineers on enforcing and monitoring the implementation of HSSE procedures on construction sites and recording and raising HSSE non-conformities, as needed</li> <li>Support the Materials Engineer to supervise the testing of materials and checking of materials samples against specifications and standards, as needed</li> <li>Support project teams with the review, assessment and response to all claims raised by the contractor regarding scope, schedule and cost changes of projects, as needed</li> <li>Support the supervision team during the hand-over and defects liability period, as needed</li> <li>Support Site Engineers with the preparation of commissioning reports and with conducting final inspection of works</li> <li>Assist Site Engineers with the preparation of list of snags to the contractor and monitoring the contractors rectification of list of snags during the Defects Liability Period</li> <li>Provide input for the preparation and issuance of Take-Over Certificates and Defect Liability Certificates</li> <li>Provide input to Planning Engineers for the development of project progress reports, as needed</li> <li>Implement corporate policies and procedures</li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Require Electrician, Piping Technician, Mechanical Engineer and Gas Technician for Engineering Maintenance Company in Oman. Candidate must require experience in Heavy Industry like Cement, Power oil etc.</p></div></section>

<p>To cook and prepare all required dishes in a timely and efficient manner according to related recipes and specifications To use materials correctly and make continuous efforts to avoid and/or minimize wastage To keep kitchen and other work places clean and tidy at all times To coordinate works with colleagues and work together as one team, ensure harmony and provide assistance as may be required To ensure correct use of equipment and report damages for required repairs To ensure the responsibility for the integrity and confidentiality of all documents and other information within the company and to ensure that no information is disclosed to unauthorised personnel To observe and enforce the company s Rules and Regulations and report any serious breach of these rules to immediate superiors To ensure/carry out all works in strict and full compliance with Company HSE Plans, Policies, Procedures and to STOP any unsafe work immediately To understand and comply with the AA Group s Commitment to Health, Safety and Environment (HSE) that is expressed through the OHS Policy, Environment Policy, Alcohol &amp; Drugs Policy, Transportation Policy, Food Safety &amp; Hygiene Policy, Anti Bribery &amp; Corruption Policy and the Ethical Code of Conduct Policy, The 12 Life Saving Rules and its Consequence Matrix and all other related documents within the AA Group s QHSE MS including that Everyone is empowered to STOP unsafe work To ensure that the rules and regulations of the AA Group and the Oman Government are understood and complied with and that any necessary disciplinary action will be taken whenever these rules and regulations are broken To understand and comply with the AA Group s Policy that prior Management permission is required before leaving a location; the use of private transport is prohibited and only Company provided or approved transportation shall be used for commuting to and from Oil &amp; Gas Interior locations To carry out any other duties and tasks required by superiors</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><strong>Key Responsibilities</strong></span></p><br><ul><li><span>Provide project management support and mechanical engineering guidance for industrial facilities and infrastructure projects.</span></li><li><span>Support the development and maintenance of engineering standards, specifications, and procedures.</span></li><li><span>Monitor contractor performance to ensure work is completed in accordance with approved drawings, specifications, quality standards, and project requirements.</span></li><li><span>Manage and control site activities to achieve project objectives within approved schedule and budget constraints.</span></li><li><span>Prepare and present project progress reports, forecasts, and status updates to management.</span></li><li><span>Lead projects through all project phases, from concept and scope development through technical evaluation, execution, commissioning, and handover.</span></li><li><span>Coordinate engineering activities and pre-operational testing required for successful commissioning and start-up.</span></li><li><span>Evaluate proposed projects and provide technical recommendations.</span></li><li><span>Prepare technical reports, specifications, and supporting project documentation.</span></li><li><span>Monitor and assess contractor performance and compliance with project requirements.</span></li><li><span>Follow instructions and guidance provided by the designated Project Manager or Engineer-in-Charge.</span></li><li><span>Ensure compliance with applicable health, safety, environmental, and quality standards throughout project execution.</span></li></ul> a { text-decoration: none; color: #464feb;}tr th, tr td { border: 1px solid #e6e6e6;}tr th { background-color: #f5f5f5;}<br><p><span><strong>Qualifications</strong></span></p><br><ul><li><span>Bachelor's degree in Mechanical Engineering.</span></li><li><span>Master's degree in Engineering, Management, or a Project Management certification is advantageous.</span></li><li><span>Chartered Engineer status is considered an advantage.</span></li></ul><p><span><strong>Experience &amp; Skills</strong></span></p><br><ul><li><span>Minimum 10 years of project, design, and engineering experience within heavy industrial environments.</span></li><li><span>Experience in brownfield industrial projects is preferred.</span></li><li><span>Strong knowledge of project management principles and practices.</span></li><li><span>Proficiency in SAP and Microsoft Office applications (Word, Excel, PowerPoint).</span></li><li><span>Working knowledge of engineering and drafting software such as AutoCAD.</span></li><li><span>Experience with project planning software such as Microsoft Project and/or Primavera.</span></li><li><span>Sound understanding of budgets, contractual requirements, business processes, and organizational decision-making.</span></li><li><span>Experience supervising installation and commissioning of bulk material handling equipment, including conveyors and associated static and rotating equipment.</span></li><li><span>Proven experience managing contractors and multidisciplinary project teams.</span></li><li><span>Strong written and verbal communication skills, including technical reporting.</span></li><li><span>Demonstrated decision-making, coordination, and stakeholder management capabilities.</span></li><li><span>Knowledge of standard contract terms and conditions.</span></li><li><span>Working knowledge of industrial safety practices and project execution requirements.&nbsp;</span></li></ul><br><p><span><strong>Moving forward together</strong></span></p><br><p><span>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</span></p><br><p><span>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</span></p><br><p><span>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</span></p><br> </div>

<p>To cook and prepare all required dishes in a timely and efficient manner according to related recipes and specifications To use materials correctly and make continuous efforts to avoid and/or minimize wastage To keep kitchen and other work places clean and tidy at all times To coordinate works with colleagues and work together as one team, ensure harmony and provide assistance as may be required. To notify Supervisor of any issues that arise that may affect operations To ensure correct use of equipment, it s kept clean and report damages for required repairs To ensure the responsibility for the integrity and confidentiality of all documents and other information within the company and to ensure that no information is disclosed to unauthorised personnel To observe and enforce the company s Rules and Regulations and report any serious breach of these rules to immediate superiors To ensure/carry out all works in strict and full compliance with Company HSE Plans, Policies, Procedures and to STOP any unsafe work immediately To understand and comply with the AA Group s Commitment to Health, Safety and Environment (HSE) that is expressed through the OHS Policy, Environment Policy, Alcohol &amp; Drugs Policy, Transportation Policy, Food Safety &amp; Hygiene Policy, Anti Bribery &amp; Corruption Policy and the Ethical Code of Conduct Policy, The 12 Life Saving Rules and its Consequence Matrix and all other related documents within the AA Group s QHSE MS including that Everyone is empowered to STOP unsafe work To ensure that the rules and regulations of the AA Group and the Oman Government are understood and complied with and that any necessary disciplinary action will be taken whenever these rules and regulations are broken To understand and comply with the AA Group s Policy that prior Management permission is required before leaving a location; the use of private transport is prohibited and only Company provided or approved transportation shall be used for commuting to and from Oil &amp; Gas Interior locations To carry out any other duties and tasks required by superiors</p><p><strong>Desired Candidate Profile</strong></p><p>NA</p>

<p>Looking for a QS Engineer with min 4 to 5 year of Experience</p><p><br></p><p>for OMAN - 300 OMR</p><p>Oman Driving License will be an added advantage</p><p><strong>Desired Candidate Profile</strong></p><p>min 4 to 5 year of Experience</p>

<p>Potential to develop up to a Cost Estimator / Engineer position for large projects. Review of proposed "Star Rates" on description and validation. Providing all type of measurements or valuations of Direct costs . Single focal point in QS issues.</p>