Electrical Drafts Man Jobs in Oman

<p>The Production Delivery Supervisor oversees the daily operations of oil field production, ensuring that safety, efficiency, and output targets are met. Key responsibilities include managing production schedules, coordinating with cross-functional teams, and ensuring adherence to both operational and HSE regulatory standards. The role involves monitoring equipment performance, troubleshooting issues, supervising field personnel, and ensuring timely and safe delivery of products. The supervisor is also responsible for implementing and enforcing HSE protocols, conducting safety audits, and leading emergency response efforts when necessary. Additionally, they play a key role in promoting a culture of safety and environmental responsibility within the team.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><h2>Main tasks and responsibilities</h2><ul><li>Provides extend well testing appraisals for production of the tight gas reservoirs in the Surface Facilities B60 - Off Plot.</li><li>Avoid excessive flaring of significant volumes of gas while predict full field production profiles.</li><li>Gather EWT data to support on the reduction Key depletion planning uncertainties identified at the outset of appraisal to a level sufficient to inform an investment decision. Ensure the EWT testing improves confidence in predictions of production profiles for the range of full field development wells.</li><li>Reveal the potential full field development design and startup concerns related to formation of hydrates due to gas expansion at the wellhead along with other potential integrity risks due to high chlorides content and the presence of minor H2S levels</li><li>Ensure the changing fluid chemistry helps in redefining the fluid basis of surface facilities design to optimize operability of the full field development.</li><li>Wells custodianship Receiving all handovers from WS (hoist), sending handovers to construction for hook up. Preparing wells handovers to WS for workover and following up with construction for un-hook &amp; re-hook up activity. In case well relates to OHL, to follow up with maintenance electrical team for power isolation/de-isolation as part of hook up</li><li>Follow up new wells hook up till walk down, attend walk down and record any punch points captured and follow up the closure of punch points. Follow up with surface equipment (VSD &amp; Surface cable) delivery and make sure that construction has marked VSD location to be offloaded correctly</li><li>Other off plot activities: Follow up with construction &amp; commissioning teams (along with support of PDTL) on TL, MSV, produced water lines, export lines/manifolds, etc and attend their walk down, PSSR &amp; commissioning. Participate in off plot shut down activities planned &amp; non-planned.</li><li>Supervise field personnel and ensure full compliance with HSE regulations. Implement and maintain HSE policies, procedures, and best practices. Conduct regular safety audits, risk assessments, and emergency drills. Promote safety awareness and lead incident investigations, providing corrective actions. Report production and HSE metrics to senior management.</li><li>Flexible to act any of off plot tasks like production delivery team lead, water section supervisor for some time if required.</li><li>Act as accountable &amp; responsible on maintaining workflow and managing to update any required documentation (handovers form, MCC, other reports). Once delegation is done a proper &amp; documented handover shall be given on time.</li></ul><h2>Key interactions</h2><ul><li>Internal: Upstream</li><li>External: Contractors, Vendors &amp; Suppliers</li></ul><h2>Notable Working Conditions</h2>Field Operations and office environment, Moderate to intensive computer screen use.<p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's in engineering, or related.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Bachelor Supervisor 5-7 years of relevant experience</li><li>Experience in relevant position in EWT (Extended Well Testing)</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Experience with well Surface Well Testing methods: Surface Test Tree, Surface Safety Valve, piping, Data Header, Choke Manifold, Heat Exchanger, 3 Phase Separator, Surge or Atmospheric Tank, Transfer Pump, Chemical Injection Pump, Emergency Shutdown System, Burner Boom/Burner Head or Flare Stack, Lab Container and Workshop.</li><li>Strong management &amp; leadership skills to lead all aspects of the Operation &amp; Maintenance process &amp; should be able to work collaboratively with all involved.</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Excellent interpersonal skills and multi-cultural sensitivity</li><li>Computer literate with expertise in MS Office.</li><li>EWT facility to perform</li><li>Surface Operations Off Plot</li><li>Field Production Operation</li><li>Water Treatment</li></ul>

<p>The Production Delivery Supervisor oversees the daily operations of oil field production, ensuring that safety, efficiency, and output targets are met. Key responsibilities include managing production schedules, coordinating with cross-functional teams, and ensuring adherence to both operational and HSE regulatory standards. The role involves monitoring equipment performance, troubleshooting issues, supervising field personnel, and ensuring timely and safe delivery of products. The supervisor is also responsible for implementing and enforcing HSE protocols, conducting safety audits, and leading emergency response efforts when necessary. Additionally, they play a key role in promoting a culture of safety and environmental responsibility within the team. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities:</strong></p><ul><li>Provides extend well testing appraisals for production of the tight gas reservoirs in the Surface Facilities B60 - Off Plot.</li><li>Avoid excessive flaring of significant volumes of gas while predict full field production profiles.</li><li>Gather EWT data to support on the reduction Key depletion planning uncertainties identified at the outset of appraisal to a level sufficient to inform an investment decision.</li><li>Ensure the EWT testing improves confidence in predictions of production profiles for the range of full field development wells.</li><li>Reveal the potential full field development design and startup concerns related to formation of hydrates due to gas expansion at the wellhead along with other potential integrity risks due to high chlorides content and the presence of minor H2S levels</li><li>Ensure the changing fluid chemistry helps in redefining the fluid basis of surface facilities design to optimize operability of the full field development.</li><li><strong>Wells custodianship</strong></li><li>Receiving all handovers from WS (hoist), sending handovers to construction for hook up.</li><li>Preparing wells handovers to WS for workover and following up with construction for un-hook &amp; re-hook up activity.</li><li>In case well relates to OHL, to follow up with maintenance electrical team for power isolation/de-isolation as part of hook up</li><li>Follow up new wells hook up till walk down, attend walk down and record any punch points captured and follow up the closure of punch points.</li><li>Follow up with surface equipment (VSD &amp; Surface cable) delivery and make sure that construction has marked VSD location to be offloaded correctly</li><li><strong>Other off plot activities:</strong></li><li>Follow up with construction &amp; commissioning teams (along with support of PDTL) on TL, MSV, produced water lines, export lines/manifolds, etc and attend their walk down, PSSR &amp; commissioning.</li><li>Participate in off plot shut down activities planned &amp; non-planned.</li><li>Supervise field personnel and ensure full compliance with HSE regulations.</li><li>Implement and maintain HSE policies, procedures, and best practices.</li><li>Conduct regular safety audits, risk assessments, and emergency drills.</li><li>Promote safety awareness and lead incident investigations, providing corrective actions.</li><li>Report production and HSE metrics to senior management.</li><li>Flexible to act any of off plot tasks like production delivery team lead, water section supervisor for some time if required.</li><li>Act as accountable &amp; responsible on maintaining workflow and managing to update any required documentation (handovers form, MCC, other reports).</li><li>Once delegation is done a proper &amp; documented handover shall be given on time.</li></ul><p><strong>Key interactions</strong></p><p>Internal: Upstream</p><p>External: Contractors, Vendors &amp; Suppliers</p><p><strong>Notable Working Conditions.</strong> Field Operations and office environment, Moderate to intensive computer screen use.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor in engineering, or related.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Bachelors, 5-7 years</li><li>Diploma, &gt;7 years</li><li>Experience in relevant position in EWT (Extended Well Testing)</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Experience with well Surface Well Testing methods: Surface Test Tree, Surface Safety Valve, piping, Data Header, Choke Manifold, Heat Exchanger, 3 Phase Separator, Surge or Atmospheric Tank, Transfer Pump, Chemical Injection Pump, Emergency Shutdown System, Burner Boom/Burner Head or Flare Stack, Lab Container and Workshop.</li><li>Strong management &amp; leadership skills to lead all aspects of the Operation &amp; Maintenance process &amp; should be able to work collaboratively with all involved.</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Excellent interpersonal skills and multi-cultural sensitivity</li><li>Computer literate with expertise in MS Office.</li><li>EWT facility to perform Surface Operations</li><li>Off Plot Field Production Operation</li><li>Water Treatment</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><span style="font-size: 11px;">Job Summary: The Lead TFA, having completed level III competencies, will contribute to the management of site activities including planning, organizing, integrating, and monitoring of resources such as labor, tools and technical assistants as required to complete the work scope according to contractual requirements. Will work within defined parameters to make decisions, apply concepts to issues of great complexity, and resolve issues through immediate action or short-term planning at customer power generating facilities.</span></p><p>Essential Duties &amp; Responsibilities:</p><ol><li>Project &amp; Site Management "Manage, perform, coordinate...": You are not just a technician; you are the Project Manager. You must organize labor, integrate subcontractors (riggers, welders, etc.), and ensure that resources are available when the schedule dictates. "Perform walk-downs... to ensure that the customer s contractors are working": As the Lead, you are the auditor. You walk the site to ensure the work is being done to the correct specifications, identifying issues before they become critical failures. "Ensure all parts needed for the job are shipped to the site": Logistics ownership. You are responsible for the supply chain for your specific outage scope.</li><li>Technical Execution &amp; Troubleshooting "On-site installation... preventive maintenance, repair, and calibration": You are the expert who ensures the systems are installed and tuned correctly. "Knowledge to troubleshoot... wide range of equipment vintage": You are expected to have an intuitive understanding of both modern gear and older, "vintage" equipment that may lack current support documentation. "Perform aftermarket upgrades": You act as the technical sales link, identifying and executing opportunities to improve the customer's equipment efficiency or reliability during the outage.</li><li>Customer &amp; Administrative Leadership "Provide technical instruction... to customer representatives": You are the primary educator for the customer. You must explain why certain procedures are necessary, building their trust in your expertise. "Administrative functions": This is the "paperwork" that ensures the business side of the outage is secure. This includes writing professional technical reports, managing quotations, and completing timesheets. Crucially, you are the person who "signs off on all changes," meaning you accept personal responsibility for the technical validity of the work performed. "Prepare timely and accurate technical reports": These reports are the legacy of the job. They serve as the customer's record and a roadmap for the next TFA who visits that site.</li><li>Safety &amp; Mentorship "Maintain strong safety mindset": You are responsible for the safety culture of the site. If the environment is unsafe, your duty is to stop the work. "Coach, mentor, and train other team members": This is the core of "Lead" status. You are responsible for the technical development of your team, ensuring that GE/FieldCore expertise is passed down to junior members.</li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Required Qualifications &amp; Experience :</h2><p>Education/Experience Path: Path A: Technical/University Degree. Path B: High School Diploma/GED + 4 years in a Field Services role.</p><p>Core Experience: Minimum 7+ years in field services or power generation maintenance. (This is a significant amount of experience, indicating they want someone who has "seen it all.")</p><p>Level III Certification: You must have successfully completed the required Level III training programs . This is non-negotiable within the GE/FieldCore system.</p><p>Technical Literacy: You must be highly proficient in reading/interpreting: Electrical/Mechanical flow diagrams. Instrument diagrams.</p><p>Advanced Tools: Specifically, dial and laser alignment and thermal growth equipment . (If you have worked with these, ensure they are front-and-center on your resume).</p><p>Logistics &amp; Communication: English proficiency: Required for technical reporting and customer communication.</p><p>Mobility: Willingness to travel extensively and work holidays/weekends/overtime. This is a core expectation for a Lead.</p><h2>Desired Characteristics:</h2><ul><li>Experienced Has the knowledge and skill to oversee field service activities and may possess expertise in a secondary competency.</li><li>Demonstrates mentor and team lead skills</li><li>Experience and training on Alstom, Siemens, or other OEM equipment</li><li>Extensive Field Engineering Services experience</li><li>Strong organizational and project management skills</li><li>Strong oral and written interpersonal, communication, and leadership skills</li><li>Strong business acumen and ability to sell GE products to the customer</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p><strong>Job Title:</strong> Site Engineer</p><p><strong>Reports To:</strong> Project Manager / Construction Manager</p><p><strong>Job Details</strong></p><p>Number of Vacancies: 9</p><p>Position Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p><strong>Job Purpose</strong></p><p>The Site Engineer is responsible for planning, coordinating, and executing engineering projects to ensure they are completed safely, on time, within budget, and in accordance with technical specifications and quality standards.</p><p><strong>Key Responsibilities</strong></p><ul><li>Assist in the planning, scheduling, and execution of engineering and technical projects.</li><li>Coordinate project activities with internal departments, contractors, consultants, and vendors.</li><li>Monitor project progress and ensure compliance with project schedules, budgets, and technical requirements.</li><li>Prepare project documentation, reports, specifications, drawings, and progress updates.</li><li>Review engineering designs, technical documents, and project deliverables.</li><li>Support procurement activities by reviewing technical specifications and evaluating vendor proposals.</li><li>Conduct site inspections and supervise project implementation activities.</li><li>Identify project risks and support the development of mitigation plans.</li><li>Ensure compliance with company policies, safety regulations, quality standards, and industry best practices.</li><li>Participate in project meetings and provide technical recommendations and solutions.</li><li>Assist with project testing, commissioning, handover, and closeout activities.</li><li>Maintain accurate project records and documentation throughout the project lifecycle.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Bachelor s Degree in Engineering (Civil, Mechanical, Electrical, Electronics, Telecommunications, Industrial, or related engineering discipline).</p><h2>Experience</h2><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic project experience in engineering or project coordination is an advantage.</p><h2>Technical Skills</h2><ul><li>Basic knowledge of project management principles and methodologies.</li><li>Familiarity with project planning tools such as Microsoft Project or Primavera.</li><li>Understanding of engineering drawings, specifications, and technical documents.</li><li>Basic knowledge of budgeting, cost control, risk management, and project reporting.</li><li>Awareness of engineering standards, quality systems, and safety regulations.</li><li>Proficiency in Microsoft Office applications.</li></ul><h2>Soft Skills</h2><ul><li>Strong analytical and problem-solving skills.</li><li>Good communication and interpersonal abilities.</li><li>Willingness to learn and develop professionally.</li><li>Ability to manage multiple tasks and meet deadlines.</li><li>Strong teamwork and coordination skills.</li><li>Attention to detail and commitment to quality.</li></ul><h2>Working Conditions</h2><p>Office and site-based work environments. May require travel to project sites and participation in inspections, meetings, and commissioning activities.</p><h2>Application Note</h2><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><u>Purpose</u></b><b>:</b></p><br><p>As part of the technical team, responsible for ensuring the most competitive and&nbsp;appropriate cable designs for each&nbsp;situation, considering OCI’s needs and&nbsp;capabilities, and the customers’ needs.</p><br><p><b><u>Summary of the Job Role</u></b><b>:</b></p><br><ul><li>Design cables in accordance with the&nbsp;parameters provided by applicable&nbsp;standards, customers and OCI.&nbsp;</li><li>To support OCI’s strategic goals and&nbsp;tendering, provide customer support and&nbsp;support Production.&nbsp;</li></ul><p><b><u>Key Deliverables – to and through the Head of Department</u></b><b>:</b></p><br><p><b><u>PRE ORDER</u></b></p><br><ul><li>Cooperate with the marketing team in responding timeously to customer enquiries for cables.</li><li>Understand the technical requirements of the customer in terms of cable and design the cable as per requirements.</li><li>Analyse the customer needs to understand the requirements as per OCI technical feasibility and provide feedback to marketing team accordingly.</li><li>Identify all aspects requiring clarification and participate in technical communications and meetings with customers to ensure the customers’ needs can be met and will be met.</li><li>Prepare raw material specifications as and when required.</li><li>You will be responsible to provide the technical data sheets as and whenever required by customers.</li><li>Prepare and upload the design sheets / BOMs for the raw materials required for production of cable in the ERP for the use of financial and marketing teams.</li><li>Coordinate with R&amp;D for all development, and with QC for additional testing that may be required.</li><li>Ensure daily activities are distributed to team members.</li><li>Risk assessment &amp; mitigation.</li><li>Design calculations– CYMCAP, Cable Sizing, Ampacity, Short Circuit Rating etc.</li></ul><p><b><u>POST ORDER</u></b></p><br><ul><li>Perform Contract review after order confirmation to clarify and finalize through marketing department any ambiguities in the purchase orders.</li><li>Prepare the CA Family, Item codes &amp; CMS (Cable Manufacturing Specification) as per the purchase order and transfer the information to production team to for final production.</li><li>Generate the information needed for the MES as and when required.</li><li>You will be responsible review the CMSs prepared by Design Engineers before sending it to production.</li><li>Prepare designs in a format suitable for driving the MES.</li><li>Work with New Product Development team, Material &amp; Lab teams, Operation &amp; Procurement team.</li><li>Take lead on CSI, DTC &amp; Sustainability activities.</li><li>Substitute managers responsibility as and when required.</li></ul><p><b><u>Qualifications</u></b><b>:</b></p><br><ul><li>Bachelor’s degree or diploma in electrical engineering.&nbsp;&nbsp;</li></ul><p><b><u>Skills/Knowledge</u></b><b>:</b></p><br><ul><li>Must have knowledge of MS Office, AutoCAD, SolidWorks &amp; CYMCAP.</li><li>Must have knowledge of Fictitious calculation &amp; Bill of Material calculation for LV, MV &amp; Instrumentation cables.</li><li>Must have understanding about cable manufacturing &amp; design for various cables like LV, MV &amp; Instrumentation cables as per IEC, BS, HD, AUS/NZ standards.</li><li>Attention for details &amp; analytical skills.</li><li>Strong Communication skills &amp; collaboration skills in an internation.</li><li>Ability to work independently &amp; perform well under-pressure.</li><li>Decision making &amp; team player.</li></ul><p><b><u>Experience</u></b><b>:</b></p><br><ul><li>Degree: 3+ years of experience as a power cable design engineer.&nbsp;</li><li>Diploma: 5+ years of experience as a power cable design engineer.</li></ul><p><b><u>Business Understanding</u></b><b>:</b></p><br><ul><li>Knowledge of costing software.</li><li>Knowledge of software for cable designing.</li><li>Knowledge of cables used for Oil &amp; Gas, Power Grids and Renewable.</li><li>Study &amp; analyzing cable market trends.</li></ul><p><i><span>Prysmian , as an Equal Opportunity Employer, aims to attract and recruit individuals with diverse backgrounds, skills, and abilities. We strongly believe that diversity brings significant value at all levels of the organization, increasing the possibility of capturing market opportunities and maximizing value for our customers and stakeholders. With Diversity, Equity, and Inclusion (DE&amp;I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. </span></i></p><br><p><br><i><span>All Managers and HRs in Prysmian are responsible for ensuring DE&amp;I policies are respected during the recruiting process, as well as recognizing and mitigating unconscious biases that must not influence our selection processes. All persons will be considered for employment without regard to their race, ethnicity, religion, nationality, origin, citizenship status, socio-economic status, age, sex, gender identity or expression, sexual orientation, marital status, disability, military service or veteran status, pregnancy, parental leave, medical conditions, or any other characteristic protected by applicable federal, state or local laws. Prysmian will endeavor to make a reasonable accommodation for any disclosed physical or neurological condition or disability of a qualified applicant unless the accommodation would impose an undue hardship on the operation of our business.</span></i></p><br><p><i>Visit our DE&amp;I Page to</i><i> learn more about Prysmian's commitments.</i></p><br><p>Your application data will be treated according to our Data Protection Policy. If you believe you require assistance to complete this form or to participate in an interview, please let us know.</p><br> </div>

<p>Job Purpose: Control and advise all the technical and operational aspects of the vessel under OSMC s management. Provide necessary marine technical expertise in shipping matters to OSMC. Establish and maintain operational standards to enhance Safety, efficiency, tradability, and reliability of the vessel. Responsible for controlling and managing actual cost and budget for the vessels. Present requirement is for Very Large Crude Carriers, LR/MR Product and Chemical tankers, Very Large Bulk Carriers and Supramax Bulk Carriers.</p><p>Key Accountabilities</p><p>Supervision of Subordinates Support and supervise the vessels command in all aspects.</p><p>Instruction Manual Establish and maintain operations policies, procedures, and instruction manuals to ensure safe, reliable, and efficient operation including loading, discharging, gas free and docking etc. and supervise the provision of other services to the vessel.</p><p>Certificate &amp; Legal Document Validation Supervise expire date of all statutory and class certificates and documents to ensure they are as per legislative requirements and in accordance with OSMC s policies. Insurance, finance, crewing quality certificates by relevant departments Familiar with relating contract, agreement including technical management of operations activities, IMO &amp; Class rules and regulations.</p><p>Port Authority Coordination Liaises, as appropriate, with terminal operators at loading/unloading ports, customers, joint ship owners, service engineer and shipping agents store suppliers etc. Prepares repair and docking specification beforehand. Draw up estimate to obtain approval by the Fleet Manager as per requirement. Attend DD and co-ordinate with shipyard for safe and successful DD completion. Supervise, upkeep and maintenance as per scheduled in accordance with approved plan, making the necessary occasional visits.</p><p>System Audit Supervise ship maneuvering and mooring, etc. and ensure all established policies and processes are correctly implemented. Discusses and resolves in conjunction with Marine Manager and Fleet Manager, failure of machineries, unsatisfactory performance, etc. Administer in house ISM system, conduct audit of the vessel and in-house systems and conduct evaluation of the crew etc. in conjunction with ISM system.</p><p>Budgets and Plans Contribute to the preparation of the technical department budget and monitor financial performance versus the budget so that the business is aware of anticipated costs/revenues and areas of unsatisfactory performance are identified, rectified promptly and potential performance improvement opportunities are capitalized upon. Control and manage actual and budget for maintenance, Ship Store, LO, Medicines etc..</p><p>Policies, Systems, Processes &amp; Procedures Recommend improvements to departmental procedure and direct the implementation of instructions and controls covering a specific area of technical activity so that all relevant procedural/legislative requirements are fulfilled while delivering a quality, cost-effective service. Maintain a particular and clear PMS system ensuring the vessel is always meeting OSMC s standards. Ensure accurate and swift sign off and approval of all stores and requisitions, ensuring that no outstanding payments are impacting OSMC s relationship to its suppliers.</p><p>Continuous Improvement Stimulate subordinates and contribute to the identification of opportunities for continuous improvement of technical systems, processes and practices considering international best practice , improvement of business processes, cost reduction and productivity improvement.</p><p>MIS and Reports Prepare departmental MIS statements and reports timely and accurately to meet OSC and department requirements, policies and standards.</p><p>Safety, Quality &amp; Environment Ensure compliance to all relevant safety, quality and environmental management procedures and controls to guarantee employee safety, legislative compliance, delivery of high-quality product/service and a responsible environmental attitude.</p><p>Operating Activities Ensure timely condition monitoring of machinery by maintenance system to facilitate smooth operation. Ensure maintenance of the validity of all certificates and documents as per OSC policies and guidelines. Follow and co-ordinate with vessel to maintain all defect reports. Follow and co-ordinate with vessel to maintain inventory of all critical spares.</p><p>Document control and filing Ensure SMS document control and filing for duty ship.</p><p>Maintenance Visits Manage the upkeep and maintenance on board by making occasional/periodic visit, as per the set schedule</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum Qualification: Bachelor of Engineering in Marine/Mechanical/Electrical or Naval Arch.</li><li>Chief Engineer Certificate of Competency (Motor or Steam, as required).</li><li>Minimum Experience: Minimum of 10 years of relevant experience, including at least 1 year as a Technical Superintendent or 3 years as a Chief Engineer onboard a Foreign-Going (F.G.) vessel.</li></ul><p>Job Specific Skills:</p><ul><li>Detail oriented</li><li>Driven by getting things done correct.</li><li>Structured Communication</li><li>Organized in work.</li><li>Good Technical Knowledge</li></ul><p>Competencies:</p><ul><li>Marine Engineering Management</li><li>Planned &amp; Unplanned Maintenance</li><li>Vessel Technical Performance &amp; Monitoring</li><li>Spares /Stores Supply Chain Management</li><li>Dry Docking &amp; Repairs</li><li>Sale and Purchase Management</li><li>Technical Investigation &amp; Risk Analysis.</li></ul>

<p>Oversee and manage all activities related to maintenance of the rotating equipment including - developing QA/QC protocols and procedures for preventive and corrective maintenance by delivering technical excellence and leadership to ensure that the technical integrity of the rotating equipment is maintained.</p><p><strong>MANAGERIAL RESPONSIBILITIES</strong></p><ul><li>Drive seamless communication between senior leadership, team members, and other departments to ensure smooth flow of information and timely decision making</li><li>Build a strong team culture by fostering a positive and productive work environment and ensuring that the staff is motivated and collaborative</li><li>Set clear goals and expectations for team members, regularly assess their performance against the set goals, and provide constructive feedback for continuous improvement</li><li>Conduct regular check ins with team members for alignment on expectations and performance</li><li>Lead the rotating equipment team and ensure effective and efficient utilization of resources to achieve departmental objectives</li><li>Guide and support team members on all operational and functional matters and resolve any doubts/concerns/grievances they have</li><li>Devote time to train team members on new ways of working, developing new competencies, and upskilling to drive performance and productivity</li></ul><p><strong>FUNCTIONAL RESPONSIBILITIES</strong></p><p><strong>Rotating Equipment Strategic Planning and Budgeting:</strong></p><ul><li>Develop departmental strategies in alignment with the corporate strategy and ensure alignment of the delivery of business results to the corporate objectives</li><li>Develop and maintain the long-term strategic plan for the engineering discipline activities in the Asset Reference Plan, and ensure alignment with production, maintenance, and projects for delivery</li><li>Develop optimum Capex &amp; Opex budget for all rotating equipment engineering activities considering the future requirements and forecast expenditure to ensure sufficient funds and resources are available at all times</li></ul><p><strong>Project, Operation, and Maintenance of Rotating Equipment:</strong></p><ul><li>Lead Rotating engineering activities for capital projects, plant expansions, and brownfield modifications from concept selection through commissioning and start-up.</li><li>Manage Rotating project interfaces, technical evaluations, vendor selection, FAT/SAT, and contractor performance to ensure safe and efficient project delivery.</li><li>Develop and manage the delivery of technical excellence within rotating equipment engineering</li><li>Recommend best practices related to operation and maintenance of the rotating equipment</li><li>Guide the team on complex investigations and provide expert guidance to resolve technical challenges with maintenance and projects delivery</li><li>Propose and initiate reliability and safety improvement projects in coordination with reliability teams</li><li>Direct the team in technical studies and failure investigations, Process and Instrument Diagram Reviews, Safety Integrity Level (SIL) assessments and HAZOP s etc.</li><li>Act as a deputy subject matter expert (SME) for rotating equipment engineering and act as the definitive source of knowledge, technique, and expertise to provide professional and technical insight for electrical design, engineering, and trouble-shooting activities</li></ul><p><strong>Management of Spare Parts:</strong></p><ul><li>Manage and control the inventory of materials and spare parts, ensure that spare parts and material purchase orders have been prepared and updated in time on SAP and the materials are supplied well in advance of the scheduled execution</li><li>Identify spare parts and consumables requirements for rotating equipment, and submit Material Master requests for the same, as and when required</li><li>Ensure that the handling procedures are in place for all equipment (capitalized insurance spares, special tools etc.) to be handled with care to ensure its integrity and long service life</li></ul><p><strong>Quality and Assurance Management:</strong></p><ul><li>Ensure technical quality of all the rotating equipment engineering activities within the department</li><li>Ensure that the rotating equipment meet the required standards set per code or OEM or Industry best practices by regular or surprise inspections</li><li>Develop and maintain robust assurance functions within procedures to ensure risk profile in relevant business scope is identified, monitored, and controlled</li><li>Liaise with relevant area managers within production, maintenance, projects, and technology to develop and strengthen assurance processes to ensure uninterrupted plant operation</li><li>Oversee departmental activities and ensure HSSE and regulatory compliance</li></ul><p><strong>Vendor Management and Engineering Contracts:</strong></p><ul><li>Liaise with vendors as part of long-term service contracts, ensure contract terms and conditions are fulfilled</li><li>Support ENR in strategizing major engineering contracts from inception, contract strategy, contractor evaluation to selection</li><li>Ensure delivery of major contracts and contractual compliance with regards to budgets, safety and quality and timelines</li></ul><p><strong>Stakeholder Management and Continuous Improvement:</strong></p><ul><li>Develop and maintain cordial relationships with a variety of internal and external stakeholders with the highest standards of business ethics</li><li>Promote and foster technical innovation, acquisition of expertise and a continuous improvement culture by constantly seeking new technical developments and actively pursuing deployment opportunities</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Degree in Mechanical Engineering or Equivalent</p><p>10 years of rotating equipment experience in LNG or Oil and Gas industry</p><p>Technical Authority Level3</p><p>Demonstrated experience in the execution, engineering, construction, commissioning, or management of major industrial projects, preferably within the Oil &amp; Gas, LNG, or energy sector</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As part of the technical team, responsible for ensuring the most competitive and appropriate cable designs for each situation, considering OCI s needs and capabilities, and the customers needs. Summary of the Job Role : Design cables in accordance with the parameters provided by applicable standards, customers and OCI. To support OCI s strategic goals and tendering, provide customer support and support Production. Key Deliverables to and through the Head of Department : PRE ORDER Cooperate with the marketing team in responding timeously to customer enquiries for cables. Understand the technical requirements of the customer in terms of cable and design the cable as per requirements. Analyse the customer needs to understand the requirements as per OCI technical feasibility and provide feedback to marketing team accordingly. Identify all aspects requiring clarification and participate in technical communications and meetings with customers to ensure the customers needs can be met and will be met. Prepare raw material specifications as and when required. You will be responsible to provide the technical data sheets as and whenever required by customers. Prepare and upload the design sheets / BOMs for the raw materials required for production of cable in the ERP for the use of financial and marketing teams. Coordinate with R&amp;D for all development, and with QC for additional testing that may be required. Ensure daily activities are distributed to team members. Risk assessment &amp; mitigation. Design calculations CYMCAP, Cable Sizing, Ampacity, Short Circuit Rating etc. POST ORDER Perform Contract review after order confirmation to clarify and finalize through marketing department any ambiguities in the purchase orders. Prepare the CA Family, Item codes &amp; CMS (Cable Manufacturing Specification) as per the purchase order and transfer the information to production team to for final production. Generate the information needed for the MES as and when required. You will be responsible review the CMSs prepared by Design Engineers before sending it to production. Prepare designs in a format suitable for driving the MES. Work with New Product Development team, Material &amp; Lab teams, Operation &amp; Procurement team. Take lead on CSI, DTC &amp; Sustainability activities. Substitute managers responsibility as and when required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree or diploma in electrical engineering.</li><li>Must have knowledge of MS Office, AutoCAD, SolidWorks &amp; CYMCAP.</li><li>Must have knowledge of Fictitious calculation &amp; Bill of Material calculation for LV, MV &amp; Instrumentation cables.</li><li>Must have understanding about cable manufacturing &amp; design for various cables like LV, MV &amp; Instrumentation cables as per IEC, BS, HD, AUS/NZ standards.</li><li>Attention for details &amp; analytical skills.</li><li>Strong Communication skills &amp; collaboration skills in an internation.</li><li>Ability to work independently &amp; perform well under-pressure.</li><li>Decision making &amp; team player.</li><li>Degree: 3+ years of experience as a power cable design engineer.</li><li>Diploma: 5+ years of experience as a power cable design engineer.</li><li>Knowledge of costing software.</li><li>Knowledge of software for cable designing.</li><li>Knowledge of cables used for Oil &amp; Gas, Power Grids and Renewable.</li><li>Study &amp; analyzing cable market trends.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector. Job Title: Project Engineer Reports To: Project Manager / Engineering Manager Job Details Number of Vacancies: 1 Position Salary Range: OMR PHONE_NUMBER per month Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate) Job Purpose The Project Engineer is responsible for planning, coordinating, and executing engineering projects to ensure they are completed safely, on time, within budget, and in accordance with technical specifications and quality standards.</p><p>Key Responsibilities Assist in the planning, scheduling, and execution of engineering and technical projects. Coordinate project activities with internal departments, contractors, consultants, and vendors. Monitor project progress and ensure compliance with project schedules, budgets, and technical requirements. Prepare project documentation, reports, specifications, drawings, and progress updates. Review engineering designs, technical documents, and project deliverables. Support procurement activities by reviewing technical specifications and evaluating vendor proposals. Conduct site inspections and supervise project implementation activities. Identify project risks and support the development of mitigation plans. Ensure compliance with company policies, safety regulations, quality standards, and industry best practices. Participate in project meetings and provide technical recommendations and solutions. Assist with project testing, commissioning, handover, and closeout activities. Maintain accurate project records and documentation throughout the project lifecycle.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Bachelor s Degree in Engineering (Civil, Mechanical, Electrical, Electronics, Telecommunications, Industrial, or related engineering discipline).</p><h2>Experience</h2><p>Practical Experience: 0 (No prior work experience required) Internship or academic project experience in engineering or project coordination is an advantage.</p><h2>Technical Skills</h2><p>Basic knowledge of project management principles and methodologies. Familiarity with project planning tools such as Microsoft Project or Primavera. Understanding of engineering drawings, specifications, and technical documents. Basic knowledge of budgeting, cost control, risk management, and project reporting. Awareness of engineering standards, quality systems, and safety regulations. Proficiency in Microsoft Office applications.</p><h2>Soft Skills</h2><p>Strong analytical and problem-solving skills. Good communication and interpersonal abilities. Willingness to learn and develop professionally. Ability to manage multiple tasks and meet deadlines. Strong teamwork and coordination skills. Attention to detail and commitment to quality.</p><h2>Working Conditions</h2><p>Office and site-based work environments. May require travel to project sites and participation in inspections, meetings, and commissioning activities.</p><h2>Application Note</h2><p>The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age The closing date is 3rd August 2026.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What if you could shape a career as unique as you? </p> <p> At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons.<br> </p> <p> <span>Protection Engineer who will be responsible for managing Protection activities for projects shall undertake the following actions</span> </p> <ul> <li>Bachelor s degree in Engineering or related field.</li> <li>Professional engineering license preferred.</li> <li>In-depth knowledge of electrical systems, codes, and standards.</li> <li> <p>Proven experience in project management and team leadership. <br> </p> <p> <strong>Imagine a better future for you and a better future for us all. </strong> <br> </p> <p>Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? <br> <strong> </strong> </p> <p> <strong>With us, you can. Apply today.</strong> </p> </li> </ul> <ul> <li> <p>Conduct Witness test relay functional test for determining correct operation and sign off the relevant documents. Make appropriate recommendation/resolution for mitigation to Operations, and report to line manager.</p> </li> <li> <p>Perform system studies, provide protection requirements for design, review and sign off one-line, elementary, logic diagrams and work with other discipline engineers - substation engineers, Distribution Field engineers, project engineers, apparatus engineers - to support sub transmission and distribution substation expansion, substation automation and infrastructure replacement projects.</p> </li> <li> <p>Gather and evaluate line data of transmission, sub-transmission, distribution systems, transformer test data, switchgear date, etc. Model systems on appropriate software tool, such as CAPE, perform short circuit studies, and protection coordination studies necessary for completing relay settings, perform relay settings, prepare protection summary, and coordinate relay settings with protection departments. </p> </li> <li> <p>Issue Substation Relays and field Auto recloser settings via relevant relay database to the field, support Test technicians in-servicing or commissioning relay settings, review/approve returned as-left relay setting files, and communicate with Test technicians for making revisions/changes to relay settings as necessary.</p> </li> <li> <p>Drive, Support and Contribute to innovative projects/initiatives such as Protection impact studies due to Distributed Energy Resources (Micro grid, Battery Storage, etc.,), Downed Conductor detection, Arc flash fault duties and Grid Modernization efforts.</p> </li> <li> <p>Ability to analyse information, perform engineering assessments and evaluations and provide reports and recommendations to internal clients and project team members.</p> </li> <li> <p>Experience using application software such as Microsoft Word, Excel, PowerPoint, Access, Visio, and Project.</p> </li> <li> <p>Analyse post-fault event using historical data such as DFR traces, digital relay records, or related data.</p> </li> <li> <p>Support and Reviews advanced power system analyses.</p> </li> <li> <p>Performs field inspections and provides professional field support as necessary during construction phases.</p> </li> <li> <p>Performs investigation of material and system failures</p> </li> <li> <p>On site commissioning, testing and support</p> </li> <li> <p>Other relevant duties assigned by client. </p> </li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Design &amp; Commissioning Engineer Security &amp; Telecom Summary Engineering Graduate with minimum 5-7 years of relevant experience in commissioning of Security system products like Milestone, Genetec, Lenel, CEM System, Softwarehouse, Honelywell, Bosch, Gallaget, Senstar and Southwest Microwave, responsible entire commissioning and technical compliance. Key Job responsibilities and duties Reporting to Technical Lead on all technical related points Analyze system hardware and software requirements for all assigned Security &amp; Telecom System Project BOQ and design properly as per Project requirement Review and ensure Technical Correctness of MAS and Procurement. Designs and/or engineers Security &amp; Telecom systems including but not limited to Access Control system, physical security, intrusion, Video Management System, Fiber optic solution, Structured Cabling solutions, Networking, Telephony, Storage etc. Defines all Technical architectures components including, hardware, software, OS, performance and monitoring of projects assigned, in alignment with all compliance and best practice guidelines. Completes all system design(s) and engineering to core engineering standards. Acts as technical design owner and subject matter expert for assigned projects. Guide and Check system design layouts and installation specifications, including design documents and drawings prepared by Draughtsman/Team. Recommends the use of existing and new technologies to ensure core objectives are met for all security and Telecom projects. Conduct analyses and provide direction and support for Sales/Procurement/Service/Project Team. Maintains expertise in the principles and techniques required for hardware and software system integration. Responsible for all system upgradation and ensure the systems are having latest update. Maintains knowledge of current and emerging technologies and industry best practices related to all security &amp; Telecom systems. Proposes and implements best practices and tools supporting these technologies and practices. Develops system integration skills. Attends industry seminars and /or training sessions in order to stay current with all new security technologies and integration principles. Responsible for successful completion of Factory Acceptance Test, Commissioning, Site Acceptance Test and Client approvals for assigned projects. Develop and articulates a coherent technology architecture and system wide integration for all the Technical Security Systems as project requirement. Inspect, review and approve the erection, cabling and termination works at site as required. Coordinate with system vendors and customer as necessary to implement, integrate, update and test the system. Responsible to maintain the technical documentation as per the standards. Provide the commissioning report, checklist, cause and effect matrix etc., Responsible in managing Teams in delivering client SLA without NCR and in meeting client expectations. Responsible for all technicalities and Level2 &amp; Level3 support to teams in maintaining the Low current systems like CCTV Surveillance Systems, Electronic Access Control Systems, Gates &amp; HVM, PIDS, Electrified Fence, BMS, LCS, AV systems, ICT and Telecom Systems etc. Responsible for all system upgradation and ensure the systems are having latest update. Perform &amp; work on all upgradations [to keep up the systems to latest versions] as per OEM guidelines, migrations, and expansion works in all aspects. Also, to ensure all integration works and compatibility. Responsible for SSA/CarePlus/SUP, and maintaining all clients. Highlight the renewal date of SSA/Careplus/SUP timely to get it renewed. Responsible for handing client technical queries. Conduct Training for Customer and In-house Team. Technical Presentation and lead POC/Demo to customer as required. Responsible to maintain the technical documentation as per the standards. Ensure the client satisfaction throughout the project phase in terms of technical. KPI: K.P.I sTarget % A) System commissioning, SAT and client approvals as per project schedule in line with contractual requirements and product specifications and capabilities. Commissioning the systems, up to the product specs and client expectations in line with the product capabilities B) Pro-active Pre-commissioning and timely and trouble-free commissioning works 35%To maintain all client systems up to date version, and successfully manage upgradation works, Expansion, migration works, to ensure efficient integrations and its compatibility.20%Client SLA and satisfaction levels. In meeting best performance as per ERP analysis.10%Technical documentation works, Service Analysis, better communication internal and external, regular DAR etc10%Expert knowledge on Milestone Xprotect, CEM Systems AC2000, Lenel OnGuard, Pelco VideoXpert, Paxton, Gallagher etc., Technical and Expert Support Levels for all products, and in maintaining product certifications.10%Client Relation and Handlings5%Attitude, Punctuality, Interpersonal skills5%Ensure QHSE and ISO compliance and no NCR in ISO implementation related to Project &amp; service Operations5%</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualification - Professional Engineering Graduate in Electrical, Electronics, Instrumentation, Communication, IT Experience - Engineering Graduate with minimum 5-7 years of relevant experience in managing major turnkey EPC security projects. Preferred Experience of 2-3 years in Middle East region &amp; having valid Oman driving license. 2-3 year Oil &amp; Gas Industrial security projects experience, atleast in 1 major Oil &amp; Gas (Or) Petrochemical EPC Security projects as commissioning Engineer position. The ELV products include Industrial &amp; Commercial CCTV, Integrated high end Access Control, Fire Alarm, Fire Fighting, Intruder Alarm, PAVA systems, Physical Control Equipment, PIDS, BMS, Telecom, A/V systems, ISMS, SMATV, VDP, Gate Automation &amp; residential systems, etc. In addition, the incumbent MUST have related in-depth knowledge on IT &amp; Telecom systems inclusive of database management, Fiber systems, Server &amp; Storage systems, Active &amp; passive components, operating systems, IP domain, redundancy operations in connection with ELV systems specified above.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>SCMS &amp; Cybersecurity Commissioning Engineer- Muscat, Oman Siemens strongly believes in the value of a Digital Portfolio, hence Smart Infrastructure combines Digital Power Distribution and Digital Building Infrastructure technologies. Our Digital Portfolio will enable our customers to enjoy occupant’s intuitive buildings which are comfortable, safe, secure and energy efficient. Smart infrastructure from Siemens intelligently connects energy systems, buildings and industries to adapt and evolve the way we live and work. We work together with customers and partners to build an ecosystem that intuitively responds to the needs of people and helps customers to better use resources. It helps our customers to thrive, communities to progress and supports sustainable development. Join our Smart Infrastructure Customer Services Team as the SCMS and Cybersecurity Commissioning Engineer and help us re-imagine the world by finding solutions and making the world a smarter place for tomorrow. Key Responsibilities Your Role – International, Challenging and Future-Oriented! In this role you will be performing commissioning of SCMS and Cybersecurity Systems in the Middle East based in Oman. While being part of the team, you will also be involved in the latest solutions on IOT, Cyber Security, Process Bus, etc. General Responsibilities: Configure and test Bay Control Units (BCUs), RTUs/PLCs, SCMS systems Develop new application solutions with IEC61850, Modbus, Profibus, IEC 101, IEC 104 or other communication protocols relevant in the energy automation field Design, configure, conduct FAT and commissioning of Cybersecurity for Substation Automation systems Be one of our primary customer interfaces, including trouble shooting and commissioning support Occasionally assist in developing new order proposals (bills of materials, clarifying technical comments, etc.) Design, development, implementation, testing, and commissioning of protection and control applications and schemes Prepare (SAT) Site Acceptance Test procedures. Configure, test and perform commissioning SCMS for retrofit applications. Travel to job sites, customer offices and vendors factories expected to be around 75% of total time. Perform Training on the SCMS system to customers Your Qualifications and Skills – Digital and Solid! Expected degree qualification and/or major: Bachelor’s degree in electrical/Electronics/Instrumentation Relevant year of experience: 3+ Years Knowledge of expertise: Advanced knowledge of substation network topology design; Ring/Star with redundancy protocol RSTP, PRP &amp; HSR etc. Practical knowledge of large 61850 network design, Human-Machine Interface / SCADA Parameterization including implementation of Substation Automation and Cyber Security Experience in parameterizing communication protocols, IEC61850, IEC 101, IEC 104 etc Hands-on experience in Configuring and testing BCUs with logics Configuring HMIs with SLDs, Alarms, Events, Trends, etc Configuring Gateways to convert various protocols Configuring, integration and troubleshooting of numerical devices and meters to SCMS/RTU systems Be on site to lead/participate in FAT and/or SAT and/or commissioning as required by the project Knowledge of Cybersecurity in OT Systems including configuration/parameterization of Next Gen Firewall IDS Syslog Server RBAC Hardening Awareness of IEC 62443 and IEC 62351 standards Any relevant certification: Will be an added Advantage Experience in utility or power transmission/distribution environments. Personal skills: Adaptability, problem-solving, cross-cultural collaboration, Language skills: English Considered a Plus – Not mandatory: The following experience is not mandatory; however, candidates who can demonstrate solid knowledge in these areas will be given extra consideration: Knowledge of Siemens relay/automation products and associated software Communication Network Technologies, including Design, Configuration, and troubleshooting Knowledge of ANSI standards, IEC standards. SICAM PAS SICAM SCC/WinCC SICAM A8000 RTU, SICAM 230 SCADA, SICAM AK3, Toolbox II DIGSI 4/5 Logic Building with (CAEx, ST, CFC etc) Knowledge of the multiple vendors' Numerical Relays products and associated software C, VB Programming Language experience. What else do you need to know? What else do you need to know? As a world leader in developing and producing the most advanced engineering technologies, we improve lives and further human achievements worldwide, while also protecting the climate - all thanks to our employees. Working with us, you have the foundation to develop personally and professionally. We give you the chance to do something significant that benefits society and human progress. We give you the chance to create a difference. Diversity at Siemens is our source of creativity and innovation. Having different types of talent and experiences makes us more ambitious and better prepared to respond successfully to the demands of the Society. Therefore, we value the candidates that reflect the Diversity that we enjoy in our Company. Please find more information at www.siemens.com At Siemens we are always challenging ourselves to build a better future. We need the most innovative and diverse Digital Minds to develop tomorrow ‘s reality. Find out more about the Digital world of Siemens here: www.siemens.com/careers/digitalminds We are looking forward to receiving your online application. Please note: Only complete applications can be considered in the selection process.</span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br> <p> </p> <p> <strong>Job Purpose:</strong> </p> <p> </p> <p>Provides technical maintenance expertise pertaining to Maintenance Performance Management &amp; strategies across RPI &amp; Plastics designated sites and all related operations, under TL Performance Management &amp; strategies Maintenance scope s, acting as team player for the timely and cost-effective maintenance of the RPI &amp; Plastics assigned equipment and infrastructure during the execution of maintenance and minor projects, modifications in accordance with the technical standards to maintain the assets through: (1) Prepares maintenance performance reports for all RPI &amp; Plastics facilities and advises improvements recommendations / plans; in order to support maintenance function to meet cost-effective, timely and efficient manner. (2) CAPEX &amp; OPEX budget, monitoring and control (3) Conducts periodic inventory reports analysis, spots abnormalities in demand &amp; supply reports findings.</p> <p> </p> <p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p> <p> </p> <p> <strong>Main Tasks and Responsibilities: </strong> </p> <p> </p> <p>RPI &amp; Plastics Assets Maintenance</p> <p>Maintenance planning and scheduling:</p> <p>Performance management:</p> <p>Budget management:</p> <p>Maintenance minor project management:</p> <p>Safety and environmental compliance</p> <p> </p> <p> <strong>Accountabilities: </strong> </p> <p> </p> <p> <strong>Performance Management &amp; Strategies</strong> </p> <p>Analysis of maintenance performance and initiates improvement / corrective actions.</p> <p>Assist in developing draft for Functional KPIs.</p> <p>Support in collecting Monthly progress updates, develop Stewardship report &amp; assist to develop monthly Functional KPI scorecards On-time with Quality.</p> <p>Develop special reports &amp; Presentations on-demand as advised by Team Leader</p> <p>Prepare, Analyze and Cascade Weekly Visibility Reports for all RPI &amp; Plastics Plants.</p> <p>Coordinate and align with maintenance departments to develop Maintenance Policies, Processes and Procedures and maintain documented.</p> <p>Generate or assist in generation of any departmental reports as per management request, in a timely and accurate manner.</p> <p> </p> <p> <strong>Budget</strong> </p> <p> </p> <p>Provide support &amp; Assistance in development of draft budget proposal as per guidelines received from finance Team (within time &amp; quality submission).</p> <p>Initiate budget requirements for all maintenance departments based on the scope/ volume of work.</p> <p>Development of Monthly OpEx &amp; CapEx Reports &amp; submit to Team Leader for review.</p> <p>Receive progress updates for CapEx projects from all Project Leaders &amp; Compile data for PMO submission. (Progress &amp; Cost)</p> <p>Perform analysis for Maintenance Commitments &amp; joint review with Execution teams for cleansing &amp; control.</p> <p>Budget reports, analysis to ensure that expense bookings are done under correct budget heads.</p> <p>Conduct Analysis on Actual spent vs Solomon benchmark, develop strategies and action plans to improve in lagging areas (to next Quartile)</p> <p>Focal point for Solomon studies regarding the maintenance function, leading the collection of data for the study inputs tables to be submitted to Operating Excellence team.</p> <p> </p> <p> <strong>Reporting &amp; Continuous Improvements</strong> </p> <p>Prepare, Validate and issuance of periodic maintenance performance reports (daily, weekly, Bi-weekly, Monthly etc.)</p> <p>Develop Performance reports and feedback in regard to maintenance performance, compliance monitoring to implemented work processes and issuance of recommendation to the execution teams.</p> <p>Analysis of maintenance performance KPIs and identifying opportunities for improvements.</p> <p>Maintain the maintenance department Policy, processes and procedures.</p> <p>Budget reports and analysis to ensure that expense bookings are made under correct budget heads.</p> <p>Monitoring the completion of MOCs under the maintenance function implementation and follow up with projects leaders on delays of implementation / closing.</p> <p>Contribute to the identification of opportunities for continuous improvement of function / department systems, processes and practices, cost reduction and productivity improvement. (taking into consideration 'Industrial best practice')</p> <p> </p> <p> <strong>Stakeholder</strong> </p> <p> <strong> </strong> </p> <p>Conduct &amp; chair periodic Staff meetings, prepare summary reports and provide daily updates on the performance of maintenance execution activities.</p> <p> </p> <p> <strong>Regulatory &amp; Compliance</strong> </p> <p> <strong> </strong> </p> <p>Provide facilitation for external/ internal audits and follow-up of the action items assigned against maintenance function.</p> <p> </p> <p><br></p> <p> </p> <p> <strong>Education requirements</strong> </p> <p>Minimum Qualification for this position is a degree in Mechanical / Electrical / Instrument Engineering or equivalent.</p> <p> </p> <p> <strong>Language requirements </strong> </p> <p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p> <p> </p> <p> <strong>Background and experience</strong> </p> <p> </p> <p>5-8 years of relevant experience</p> <p>Prior scheduling experience in a maintenance facility is a strong plus</p> <p>Extensive experience in reporting, planning, and scheduling routine maintenance.</p> <p>Expertise for budgeting and cost control.</p> <p>Experience in planning techniques, scheduling &amp; cost monitoring.</p> <p>Experience in Performance management for maintenance &amp; shutdown related jobs.</p> <p>Experience in handling Maintenance Contracts and shutdown related jobs.</p> <p> <u>Background</u>:</p> <p>Knowledge in material specification, QA/QC, and international Codes &amp; standards.</p> <p>Knowledge of Budget / Estimation resources (internal and external) Cost Control</p> <p>Knowledge of:</p> <p>Computerized Maintenance Management Systems (CMMS)</p> <p>Expertise in SAP- PM, MM &amp; FM Module.</p> <p>Primavera / Maximo / MS Project</p> <p>Knowledgeable in HSE plans related to maintenance activities.</p> <p>Knowledge in material specification, QA/QC, and international Codes &amp; standards</p> <p>Familiar with techniques for ensuring data integrity with various integrations of information/ reports</p> <p>Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals.</p></div></section>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a national operator to source a PCC HVAC Supervisor. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>4th quarter of 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning activities</strong></p> <ul> <li>Supervise HVAC pre commissioning and commissioning activities at site level</li> <li>Execute approved HVAC commissioning procedures and method statements</li> <li>Ensure HVAC systems are mechanically complete and ready for commissioning</li> <li>Support functional testing, start up, and performance testing of HVAC systems</li> <li>Identify, report, and assist in resolving commissioning issues and punch points</li> </ul> <p><strong>HVAC systems scope</strong></p> <ul> <li>Supervision of commissioning activities for: <ul> <li>Air handling units (AHUs)</li> <li>Chilled water and DX systems</li> <li>Packaged and split HVAC units</li> <li>Ventilation, exhaust, and pressurization systems</li> <li>Ducting, dampers, louvers, and insulation</li> <li>HVAC controls and basic instrumentation</li> </ul> </li> <li>Ensure systems are commissioned in line with design intent and operational requirements</li> </ul> <p><strong>Site supervision & coordination</strong></p> <ul> <li>Supervise technicians, subcontractors, and commissioning crews</li> <li>Coordinate daily activities with construction, electrical, and instrumentation teams</li> <li>Interface with commissioning engineers and vendors during testing activities</li> <li>Participate in system walkdowns, punch listing, and punch clearance</li> <li>Support handover activities and system acceptance</li> </ul> <p><strong>HSE & quality compliance</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE requirements</li> <li>Conduct toolbox talks and ensure safe work practices are followed</li> <li>Report unsafe conditions, incidents, and near misses</li> <li>Ensure quality documentation is completed accurately and on time</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Maintain daily commissioning activity records</li> <li>Support preparation and completion of test sheets and commissioning dossiers</li> <li>Provide progress updates to commissioning engineers and supervisors</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Diploma or bachelor’s degree in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 7–12 years of experience in HVAC installation, pre commissioning, and commissioning</li> <li>Previous experience on oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Site based commissioning experience within EPC project environments</li> <li>Middle East project experience is preferred</li> </ul> <p><strong>Technical skills</strong></p> <ul> <li>Strong hands on knowledge of HVAC systems and commissioning practices</li> <li>Ability to read and interpret drawings, layouts, datasheets, and procedures</li> <li>Familiarity with international standards such as ASHRAE, SMACNA, NFPA</li> <li>Practical troubleshooting skills during system start up and testing</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a national operator to source a PCC HVAC Supervisor. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>4th quarter of 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning activities</strong></p> <ul> <li>Supervise HVAC pre commissioning and commissioning activities at site level</li> <li>Execute approved HVAC commissioning procedures and method statements</li> <li>Ensure HVAC systems are mechanically complete and ready for commissioning</li> <li>Support functional testing, start up, and performance testing of HVAC systems</li> <li>Identify, report, and assist in resolving commissioning issues and punch points</li> </ul> <p><strong>HVAC systems scope</strong></p> <ul> <li>Supervision of commissioning activities for: <ul> <li>Air handling units (AHUs)</li> <li>Chilled water and DX systems</li> <li>Packaged and split HVAC units</li> <li>Ventilation, exhaust, and pressurization systems</li> <li>Ducting, dampers, louvers, and insulation</li> <li>HVAC controls and basic instrumentation</li> </ul> </li> <li>Ensure systems are commissioned in line with design intent and operational requirements</li> </ul> <p><strong>Site supervision & coordination</strong></p> <ul> <li>Supervise technicians, subcontractors, and commissioning crews</li> <li>Coordinate daily activities with construction, electrical, and instrumentation teams</li> <li>Interface with commissioning engineers and vendors during testing activities</li> <li>Participate in system walkdowns, punch listing, and punch clearance</li> <li>Support handover activities and system acceptance</li> </ul> <p><strong>HSE & quality compliance</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE requirements</li> <li>Conduct toolbox talks and ensure safe work practices are followed</li> <li>Report unsafe conditions, incidents, and near misses</li> <li>Ensure quality documentation is completed accurately and on time</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Maintain daily commissioning activity records</li> <li>Support preparation and completion of test sheets and commissioning dossiers</li> <li>Provide progress updates to commissioning engineers and supervisors</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Diploma or bachelor’s degree in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 7–12 years of experience in HVAC installation, pre commissioning, and commissioning</li> <li>Previous experience on oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Site based commissioning experience within EPC project environments</li> <li>Middle East project experience is preferred</li> </ul> <p><strong>Technical skills</strong></p> <ul> <li>Strong hands on knowledge of HVAC systems and commissioning practices</li> <li>Ability to read and interpret drawings, layouts, datasheets, and procedures</li> <li>Familiarity with international standards such as ASHRAE, SMACNA, NFPA</li> <li>Practical troubleshooting skills during system start up and testing</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The pre-commissioning & commissioning field instrument supervisor is responsible for supervising and executing all field instrumentation activities during the pre-commissioning and commissioning phases of a major process facility. The role ensures that instrumentation systems are installed, tested, calibrated, loop-checked, and commissioned safely, efficiently, and in accordance with project specifications and international standards.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Supervise field instrumentation activities, including installation checks, calibration, testing, and reinstatement</li> <li>Review and execute pre-commissioning procedures, check sheets, and test records</li> <li>Coordinate loop checking, functional testing, and punch listing/clearance</li> <li>Ensure correct installation and readiness of instruments, control valves, analyzers, and associated systems</li> <li>Verify compliance with project specifications, drawings, and approved vendor documentation</li> </ul> <p><strong>Commissioning phase</strong></p> <ul> <li>Support cold and hot commissioning activities for instrumentation systems</li> <li>Coordinate with commissioning engineers, operations, electrical, and DCS teams</li> <li>Troubleshoot instrumentation issues during system startup and stabilize operations</li> <li>Support logic checks, cause & effect testing, and system handover to operations</li> <li>Ensure timely closure of punch items related to instrumentation</li> </ul> <p><strong>HSE & quality</strong></p> <ul> <li>Enforce strict compliance with HSE policies, procedures, and permit to work systems</li> <li>Conduct toolbox talks and ensure safe execution of site activities</li> <li>Ensure all commissioning documentation is completed accurately and submitted on time</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise and guide technicians and subcontractors in the field</li> <li>Report daily progress, constraints, and technical issues to commissioning management</li> <li>Interface with construction, QA/QC, and client representatives as required</li> </ul> <h4>Qualifications & experience (must have)</h4> <ul> <li>Diploma or bachelor’s degree in instrumentation, control engineering, or equivalent</li> <li>Minimum 8–12 years of experience in field instrumentation, with strong exposure to pre-commissioning and commissioning</li> <li>Prior experience on large oil & gas, LNG, petrochemical, or process plant projects</li> <li>Hands-on experience with: <ul> <li>Field instruments (pressure, temperature, flow, level)</li> <li>Control valves and actuators</li> <li>Analyzers and packaged units</li> <li>Loop checking and functional testing</li> </ul> </li> <li>Strong understanding of commissioning procedures, system turnover, and punch management</li> </ul> <h4>Certifications & technical skills</h4> <ul> <li>Valid HSE certification (e.g., IOSH, NEBOSH, or equivalent)</li> <li>Familiar with international standards (IEC, ISA, API)</li> <li>Ability to read and interpret P&IDs, loop diagrams, hookups, and wiring diagrams</li> <li>Experience working with DCS/PLC systems in a commissioning environment</li> </ul> <h4>Soft skills & attributes</h4> <ul> <li>Strong leadership and field supervision skills</li> <li>Excellent coordination and communication abilities</li> <li>Problem-solving mindset with strong troubleshooting capability</li> <li>Able to work under pressure in fast paced commissioning environments</li> <li>Willingness to work extended hours and rotational site schedules</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The pre-commissioning & commissioning field instrument supervisor is responsible for supervising and executing all field instrumentation activities during the pre-commissioning and commissioning phases of a major process facility. The role ensures that instrumentation systems are installed, tested, calibrated, loop-checked, and commissioned safely, efficiently, and in accordance with project specifications and international standards.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Supervise field instrumentation activities, including installation checks, calibration, testing, and reinstatement</li> <li>Review and execute pre-commissioning procedures, check sheets, and test records</li> <li>Coordinate loop checking, functional testing, and punch listing/clearance</li> <li>Ensure correct installation and readiness of instruments, control valves, analyzers, and associated systems</li> <li>Verify compliance with project specifications, drawings, and approved vendor documentation</li> </ul> <p><strong>Commissioning phase</strong></p> <ul> <li>Support cold and hot commissioning activities for instrumentation systems</li> <li>Coordinate with commissioning engineers, operations, electrical, and DCS teams</li> <li>Troubleshoot instrumentation issues during system startup and stabilize operations</li> <li>Support logic checks, cause & effect testing, and system handover to operations</li> <li>Ensure timely closure of punch items related to instrumentation</li> </ul> <p><strong>HSE & quality</strong></p> <ul> <li>Enforce strict compliance with HSE policies, procedures, and permit to work systems</li> <li>Conduct toolbox talks and ensure safe execution of site activities</li> <li>Ensure all commissioning documentation is completed accurately and submitted on time</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise and guide technicians and subcontractors in the field</li> <li>Report daily progress, constraints, and technical issues to commissioning management</li> <li>Interface with construction, QA/QC, and client representatives as required</li> </ul> <h4>Qualifications & experience (must have)</h4> <ul> <li>Diploma or bachelor’s degree in instrumentation, control engineering, or equivalent</li> <li>Minimum 8–12 years of experience in field instrumentation, with strong exposure to pre-commissioning and commissioning</li> <li>Prior experience on large oil & gas, LNG, petrochemical, or process plant projects</li> <li>Hands-on experience with: <ul> <li>Field instruments (pressure, temperature, flow, level)</li> <li>Control valves and actuators</li> <li>Analyzers and packaged units</li> <li>Loop checking and functional testing</li> </ul> </li> <li>Strong understanding of commissioning procedures, system turnover, and punch management</li> </ul> <h4>Certifications & technical skills</h4> <ul> <li>Valid HSE certification (e.g., IOSH, NEBOSH, or equivalent)</li> <li>Familiar with international standards (IEC, ISA, API)</li> <li>Ability to read and interpret P&IDs, loop diagrams, hookups, and wiring diagrams</li> <li>Experience working with DCS/PLC systems in a commissioning environment</li> </ul> <h4>Soft skills & attributes</h4> <ul> <li>Strong leadership and field supervision skills</li> <li>Excellent coordination and communication abilities</li> <li>Problem-solving mindset with strong troubleshooting capability</li> <li>Able to work under pressure in fast paced commissioning environments</li> <li>Willingness to work extended hours and rotational site schedules</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The telecom supervisor will be responsible for supervising, coordinating, and supporting telecommunication systems activities during pre-commissioning and commissioning phases of a major onshore energy infrastructure project. The role ensures that all telecom systems are installed, tested, safe, compliant, and fully operational in line with project specifications, international standards, and schedule requirements.</p> <h4>Key responsibilities</h4> <strong>Supervision & site execution</strong><br> <ul> <li>Supervise and coordinate all telecommunication pre-commissioning and commissioning activities on site.</li> <li>Provide day-to-day supervision of subcontractors, technicians, and vendors performing telecom works.</li> <li>Ensure installation and commissioning activities are executed according to approved drawings, procedures, and specifications.</li> <li>Interface closely with construction, commissioning, ICSS, electrical, and operations teams.</li> </ul> <strong>Telecom systems scope</strong><br> <p>Supervise commissioning activities for, but not limited to:</p> <ul> <li>PAGA (Public Address & General Alarm) systems</li> <li>CCTV and security surveillance systems</li> <li>Access control systems</li> <li>Telephone systems (VoIP / PABX)</li> <li>Radio communication systems (UHF/VHF/TETRA)</li> <li>Fiber optic and structured cabling systems</li> <li>Data networks and LAN/WAN infrastructure</li> <li>Telecom equipment rooms, racks, cabinets, and patch panels</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Review and implement pre-commissioning and commissioning procedures, method statements, and test packs.</li> <li>Perform and witness inspections, loop checks, function tests, and system integration testing.</li> <li>Coordinate system energization, signaling checks, and performance verification.</li> <li>Participate in SAT (Site Acceptance Tests) and vendor commissioning support activities.</li> <li>Support system handover from construction to commissioning and from commissioning to operations.</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure full compliance with HSE requirements, company policies, and local regulations.</li> <li>Enforce permit-to-work, toolbox talks, and safe work practices at all times.</li> <li>Ensure telecom systems comply with international standards (e.g., IEC, IEEE, ITU, NFPA as applicable).</li> <li>Identify and report non-conformances, punch items, and corrective actions.</li> </ul> <strong>Documentation & reporting</strong><br> <ul> <li>Review and update commissioning dossiers, test records, and as-built documentation.</li> <li>Track punch lists and ensure timely close-out of telecom-related items.</li> <li>Prepare daily and weekly progress reports.</li> <li>Support final system acceptance and project close-out activities.</li> </ul> <strong>Coordination & communication</strong><br> <ul> <li>Act as the technical focal point for telecom commissioning on site.</li> <li>Liaise with engineering teams to resolve design and technical issues.</li> <li>Coordinate with vendors, suppliers, and third-party inspectors.</li> <li>Support operations and maintenance teams during training and handover.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>Diploma or degree in telecommunications engineering, electronics engineering, or related field.</li> <li>Minimum 8–12 years of experience in telecom systems for oil & gas, LNG, refinery, or large industrial projects.</li> <li>Proven experience in pre-commissioning and commissioning phases.</li> <li>Prior exposure to brownfield and/or greenfield energy projects is preferred.</li> <li>Experience working within EPC project environments.</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The telecom supervisor will be responsible for supervising, coordinating, and supporting telecommunication systems activities during pre-commissioning and commissioning phases of a major onshore energy infrastructure project. The role ensures that all telecom systems are installed, tested, safe, compliant, and fully operational in line with project specifications, international standards, and schedule requirements.</p> <h4>Key responsibilities</h4> <strong>Supervision & site execution</strong><br> <ul> <li>Supervise and coordinate all telecommunication pre-commissioning and commissioning activities on site.</li> <li>Provide day-to-day supervision of subcontractors, technicians, and vendors performing telecom works.</li> <li>Ensure installation and commissioning activities are executed according to approved drawings, procedures, and specifications.</li> <li>Interface closely with construction, commissioning, ICSS, electrical, and operations teams.</li> </ul> <strong>Telecom systems scope</strong><br> <p>Supervise commissioning activities for, but not limited to:</p> <ul> <li>PAGA (Public Address & General Alarm) systems</li> <li>CCTV and security surveillance systems</li> <li>Access control systems</li> <li>Telephone systems (VoIP / PABX)</li> <li>Radio communication systems (UHF/VHF/TETRA)</li> <li>Fiber optic and structured cabling systems</li> <li>Data networks and LAN/WAN infrastructure</li> <li>Telecom equipment rooms, racks, cabinets, and patch panels</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Review and implement pre-commissioning and commissioning procedures, method statements, and test packs.</li> <li>Perform and witness inspections, loop checks, function tests, and system integration testing.</li> <li>Coordinate system energization, signaling checks, and performance verification.</li> <li>Participate in SAT (Site Acceptance Tests) and vendor commissioning support activities.</li> <li>Support system handover from construction to commissioning and from commissioning to operations.</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure full compliance with HSE requirements, company policies, and local regulations.</li> <li>Enforce permit-to-work, toolbox talks, and safe work practices at all times.</li> <li>Ensure telecom systems comply with international standards (e.g., IEC, IEEE, ITU, NFPA as applicable).</li> <li>Identify and report non-conformances, punch items, and corrective actions.</li> </ul> <strong>Documentation & reporting</strong><br> <ul> <li>Review and update commissioning dossiers, test records, and as-built documentation.</li> <li>Track punch lists and ensure timely close-out of telecom-related items.</li> <li>Prepare daily and weekly progress reports.</li> <li>Support final system acceptance and project close-out activities.</li> </ul> <strong>Coordination & communication</strong><br> <ul> <li>Act as the technical focal point for telecom commissioning on site.</li> <li>Liaise with engineering teams to resolve design and technical issues.</li> <li>Coordinate with vendors, suppliers, and third-party inspectors.</li> <li>Support operations and maintenance teams during training and handover.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>Diploma or degree in telecommunications engineering, electronics engineering, or related field.</li> <li>Minimum 8–12 years of experience in telecom systems for oil & gas, LNG, refinery, or large industrial projects.</li> <li>Proven experience in pre-commissioning and commissioning phases.</li> <li>Prior exposure to brownfield and/or greenfield energy projects is preferred.</li> <li>Experience working within EPC project environments.</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Engineer is responsible for executing, coordinating, and supporting all pre-commissioning and commissioning activities related to the telecommunications systems of a large-scale oil & gas / LNG facility. The role ensures that telecom systems are installed, tested, commissioned, and handed over safely and in compliance with project specifications, international standards, and applicable codes.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Review and understand telecom engineering documents, including specifications, drawings, data sheets, method statements, commissioning procedures, and vendor documentation.</li> <li>Participate in system walkdowns, punch listing, and verification of installation completeness for telecom systems.</li> <li>Verify correctness of installation for telecom equipment, cabling, fiber optic systems, racks, cabinets, and interfaces.</li> <li>Support preparation and updating of pre-commissioning and commissioning test packs.</li> <li>Ensure all telecom systems are mechanically complete and ready for commissioning activities.</li> <li>Coordinate with construction, quality, and engineering teams to resolve technical queries and punch items.</li> </ul> <p><strong>Commissioning & start-up</strong></p> <ul> <li>Execute and supervise commissioning activities for telecom systems, including functional testing, integration testing, and system validation.</li> <li>Perform system tests such as loop checks, signal verification, end-to-end testing, and redundancy checks.</li> <li>Interface with vendors, subcontractors, and other discipline engineers during commissioning activities.</li> <li>Support energization, SAT (Site Acceptance Tests), and system integration with ICSS, safety, and IT networks.</li> <li>Identify, troubleshoot, and resolve telecom-related issues during commissioning and start-up.</li> <li>Assist in preparing systems for Ready for Start-Up (RFSU) and operational handover.</li> </ul> <h4>Telecom systems scope (typical)</h4> <ul> <li>Telecom network infrastructure (fiber optic & copper)</li> <li>Telephone systems (PABX / IP telephony)</li> <li>Public address & general alarm (PAGA) systems</li> <li>CCTV & security surveillance systems</li> <li>Access control & intrusion detection systems</li> <li>Radio communication systems (TETRA / UHF / VHF)</li> <li>Data networks & telecom cabinets</li> <li>Interfaces with control and safety systems</li> </ul> <h4>Safety, quality & documentation</h4> <ul> <li>Strictly comply with HSE policies, procedures, and site safety requirements at all times.</li> <li>Participate in toolbox talks, job safety analyses (JSA), and risk assessments.</li> <li>Ensure commissioning activities are performed in accordance with approved procedures and quality standards.</li> <li>Support compilation of as-built documentation, test records, and commissioning dossiers.</li> <li>Contribute to lessons learned and commissioning close-out reports.</li> </ul> <h4>Interface & coordination</h4> <ul> <li>Work closely with commissioning management, discipline leads, construction teams, and vendors.</li> <li>Coordinate with operations and maintenance representatives during system handover.</li> <li>Support planning and sequencing of telecom commissioning activities in line with overall project milestones.</li> </ul> <h4>Qualification requirements</h4> <ul> <li>Bachelor’s degree in telecommunications engineering, electrical engineering, or related discipline.</li> <li>Minimum 5–8 years of experience in telecom engineering, with significant exposure to pre-commissioning and commissioning activities.</li> <li>Proven experience on LNG, gas processing, or large-scale oil & gas projects.</li> <li>Strong understanding of international standards (IEC, ITU, IEEE) relevant to telecom systems.</li> </ul></p><p></p>