Electrical Drafts Man Jobs in Oman

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide HSSE Engineering safety guidance to the logistics and transportation activities &amp; processes for RPI under TL Safety AP &amp; non Plant scope s, acting as owner of HSSE road safety engineering standards, through; (1) Assesses and continues improvement OQ road safety performance. (2) IVMS systems supervision for OQ and contractors fleet, (3) Promote road safety compliance audits and inspections, and (4) Develop and provide safe journey management support to Downstream business; in order to provide exceptional support on all HSSE logistics and transportation matters at Downstream operations.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justification s, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><p><strong>Road Safety performance management :</strong></p><ul><li>Promote road safety management awareness among company employees and contractor community drivers.</li><li>Ensure effective implementation of Road Safety Management &amp; Control Procedure is implemented in OQ RPI</li><li>Ensure road safety education to OQ RPI staff and contractors on company policies, procedures and relevant standards.</li><li>Lead and facilitate investigations of Motor Vehicle Incidents (MVIs), near misses, and Road Safety Violations.</li><li>Verifiy compliance with Safe Journey Management Systems and OQ RPI procedures as per company policies.</li><li>Conduct and lead oad traffic safety assurance audits for company and contractors community land transport and commuting and provide recommendations for continual improvement.</li><li>Oversee road safety systems regular maintenance and calibration services and coordinating with external service providers to ensure timely and effective execution.</li><li>Lead management of road safety infrastructure, including traffic signs, road markings, and speed limits.</li><li>Provide expert recommendations on road and barriers design in line with Oman Highway Design Manual, and associated industry best practices.</li><li>Identify and introduce innovative technologies and solutions to enhance company road safety performance</li><li>Lead OQ RPI fleet management contracts and procurements technical specification/evalution to ensure compliance with the approved road safety standards and specifications.</li><li>Monitor and verify compliance with OPAL road safety standard at OQ RPI.</li></ul><p><strong>IVMS, Road Safety Systems &amp; Technologies.</strong></p><ul><li>Ensure Company vehicles and contractors community are equipped with approved IVMS systems, associated ancillary devices such as GPS satellite communication tools to ensure effective tracking, and distress call feature is enabled all the time.</li><li>Ensure the electronic systems and associated devices installed in vehicles to monitor driver activities are able to identify behaviours such as excessive speed, harsh braking, rapid acceleration and fatigue assistance systems are effectively managed.</li><li>Monitor and tracks journeys in real time using IVMS live tracking systems and communication tools, ensuring vehicles safely reach their final destinations.</li><li>Maintain active communication with drivers and intervene before, during and after the journey as per the Safe Journey Management.</li><li>Initiate and lead Man Lost emergency response procedure search and rescue teams to locate the vehicle and driver.</li><li>Identify, report and coordinate resolution of any malfunction or failure of IVMS and associated devices of the company vehicles and ensuring timely repair and restoration.</li><li>Prepares and Prepare and submit the daily, weekly and monthlyreports on any non-compliance or at risk driving practices or behaviours.</li><li>Manage road safety enforcement systems, including radars, ensuring proper maintenance, calibration, and functionality.</li><li>Generate and distribute monthly IVMS performance reports for OQ RPI drivers to relevant stakeholders, including key findings and improvement actions.</li></ul><p><strong>Safe Journey Management :</strong></p><ul><li>Lead the implementation and continouns improvement of the Safe Journey Management System including the monitoring system performance and effectiveness.</li><li>Lead the engagement with internal customers, and provide technical assistance in matters related to E-Safe Journey Management System across OQ RPI Operating assets</li><li>Ensure customer &amp; drivers satisfaction, by providing exceptional, consistent services, including identification of road hazards that can be experienced on the planned routes, Vehicle inspections, weather, poor road conditions, other drivers and wildlife etc.), while measuring, monitoring and optimizing their experiences.</li><li>Ensure accurate and up to date management of driver profiles and company fleet data in the E-JMS system</li><li>To drive conformance to Journey management and challenge the noncompliance of all journeys by ensuring where possible the standards, certification and legal requirements for journey management and driving are adhered to.</li><li>Verifiy the necessity of a journey with Line Management, if required, and suggests available options for an alternative means of making the journey: by air or combined together with another Company approved vehicle etc. to ensure mileage countdowns and minimize exposure</li><li>Verifiy that all journeys are assessed correctly for risk using Companyapproved Road Journey Risk Assessment Matrix..</li><li>Verifiy that only competent and trained drivers and approved vehicles are assigned to the journeys.</li><li>Develop, review and continuously improve safe journey management procedures and associated assurance checklists.</li></ul><p><strong>Safety responsibilities :</strong></p><ul><li>Minimize incidents by proper monitoring &amp; implementation of Company s Health and Safety measures.</li><li>Conduct incident investigations (Root Cause Analysis) of all recordable incidents and near misses with high potential.</li><li>Prepare &amp; execute HSE campaigns, HSE audit / inspection schedules, HSE trainings and any other training / awareness as per safety section requirement.</li><li>Develop weekly / monthly reports / presentations with good analytics and update further as per directions from Engineers / Team Lead.</li></ul><p><strong>Key interactions</strong></p><p>Internal: Internal: RPI Department Heads, Employees.</p><p>External: External Auditors, Insurance Companies, Contractors</p><p><strong>Notable Working Conditions.</strong> Field Operations and office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum qualifications for this position is a bachelor degree in engineering and safety science or equivalent.</li><li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li><li>5-7 years Relevant experience in a similar role within the Oil and Gas industry preferable in Upstream &amp; Petroleum processes.</li><li>Fundamentals of HSE - knowledge of occupational health &amp; safety. understanding of general industry standards and the requirements of the more frequently referenced standards</li><li>Working knowledge of basic health and safety concepts such as hazard and risk assessment, personal protective equipment, Root cause analysis, behaviour-based safety, machine/ equipment safety, confined space entry among others.</li><li>Good Knowledge and experience in fleet safety management systems and IVMS specifications.</li><li>Experience in general Safety operational such as: Perform safety control programs effectively e.g. plant safety walk-through, risk assessments, field Inspections of PTW, PPEs, OMT activities, contractor activities, tools, equipment etc to control hazards.</li><li>Certified Incident Investigator preferably TapRooT RCA</li><li>Fully conversant with Oman traffic laws and regulations.</li><li>Fully conversant with OPAL Road Safety Standard.</li><li>Basic qualifications in HSE.</li><li><strong>Soft:</strong> Effective planning and organization skills, Interpersonal skills with strong customer service orientation, Acute observation and calculation skills, Forecasting abilities, Business Acumen, Negotiation, Communications, Creative work methodology, Planning and organizing.</li><li><strong>Technical:</strong> Proficiency in M/S Office, Familiarized with logistic and transportation engineering best practices, Costing and Budgeting, Technical reporting, Presentation.</li></ul><p></p></section>

<p>The Project Manager shall be responsible for the overall planning, execution, supervision, coordination, and successful delivery of wastewater projects contracts. The role involves leading multidisciplinary teams, managing budgets and schedules, ensuring regulatory compliance, maintaining stakeholder coordination, and achieving contractual performance objectives in line with organizational goals.</p><p>The Project Manager shall be responsible for the overall management, coordination, and successful delivery of all ongoing and planned wastewater projects and contracts, from the initial planning stage through to project handover. This shall include ensuring the provision of all necessary support required for effective operations and maintenance. The responsibilities shall include, but not be limited to, the following:</p><ul><li>Providing overall leadership and direction to the NDS project team &amp; OE</li><li>Ensure projects are delivered safely, on time, within budget, and in compliance with contractual requirements.</li><li>Monitoring project progress, budget, KPIs, and contractor performance.</li><li>Administer and manage contracts in accordance with approved terms and conditions.</li><li>Review variations, claims, cost estimates, and financial implications of proposed changes.</li><li>Monitor project budgets, cash flow, and expenditure control.</li><li>Oversee design reviews, technical submissions, method statements, and engineering deliverables.</li><li>Ensure compliance with statutory, environmental, and regulatory requirements.</li><li>Provide strategic guidance on optimization, rehabilitation, and expansion projects.</li><li>Act as the primary point of contact between Client, Contractors, Consultants, and Regulatory Authorities.</li><li>Attend and lead progress meetings, technical reviews, and coordination sessions.</li><li>Prepare and submit executive reports to senior management and committees.</li><li>Identify opportunities for cost optimization and operational efficiency improvements.</li><li>Lead value engineering initiatives and long-term strategic planning for wastewater infrastructure.</li><li>Evaluate feasibility, return on investment, and lifecycle cost analysis for</li><li>Provide guidance and mentoring to engineering and operations staff.</li><li>Ensure proper documentation, reporting, and record keeping.</li><li>Perform any other duties assigned by NDS management as required.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s Degree in Civil / Mechanical / Electrical Engineering or equivalent.</li><li>Minimum 20 - 25 years of overall professional experience.</li><li>At least 15 - 18 years experience in wastewater projects.</li><li>Proven experience in managing large scale contracts and/or construction supervision of wastewater systems.</li><li>The Experience should be but not limited to the Water reclamation plant /Sewage Treatment Plant, Sewer Network, TSE Network &amp; Emergency outfall.</li><li>Well versed knowledge with ORACLE project management and costing module.</li><li>Strong knowledge of contract management, procurement procedures, and project controls.</li><li>Professional certifications such as PMP, PRINCE2, or equivalent will be an added advantage.</li><li>Strong leadership, decision making, and stakeholder management skills.</li><li>Excellent communication, negotiation, and reporting abilities.</li><li>Strong analytical, financial management, and risk assessment capabilities.</li><li>Good understanding of HSE regulations, statutory requirements, and quality management systems (ISO standards).</li></ul>

<p>We are seeking an experienced and highly motivated Senior Tendering Engineer to join our team in Oman. The ideal candidate will have a minimum of 10 years of experience in tendering and proposal management within the energy sector, including Oil &amp; Gas, Power Generation, Transmission &amp; Distribution, Renewable Energy, or EPC projects. The candidate will be responsible for managing the complete tendering process, ensuring competitive, compliant, and commercially sound proposals that support the company's business growth.</p><p>Key Responsibilities</p><ul><li>Lead the end-to-end tendering and bidding process from receipt of inquiry to final submission.</li><li>Review tender documents, technical specifications, commercial requirements, and contractual terms.</li><li>Coordinate with engineering, procurement, estimation, finance, legal, and project teams to prepare comprehensive technical and commercial proposals.</li><li>Develop accurate cost estimates, pricing strategies, and bid documentation.</li><li>Prepare bid clarifications and respond to client queries during the tender evaluation process.</li><li>Conduct risk assessments and identify commercial, technical, and contractual risks associated with bids.</li><li>Negotiate with suppliers and subcontractors to obtain competitive quotations.</li><li>Ensure all tender submissions comply with client requirements, company standards, and applicable regulations.</li><li>Maintain bid schedules and ensure timely submission of proposals.</li><li>Support management during contract negotiations and project handover after award.</li><li>Monitor market trends, competitor activities, and upcoming opportunities within the energy sector.</li><li>Maintain an organized repository of tender documentation and proposal templates.</li><li>Contribute to continuous improvement of tendering processes and best practices.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications</h2><p>Bachelor's Degree in Engineering (Mechanical, Electrical, Civil, Instrumentation, or equivalent). Additional qualifications in Project Management or Commercial Management are an advantage.</p><h2>Experience</h2><p>Minimum 10 years of proven experience in tendering, bid management, or proposal engineering within the Energy sector . Experience in EPC projects related to Oil &amp; Gas, Power, Utilities, Renewable Energy, or Industrial Infrastructure. Previous experience working in GCC countries, particularly Oman, is preferred.</p><h2>Required Skills</h2><ul><li>Strong knowledge of tendering procedures and contract documentation.</li><li>Excellent understanding of commercial and contractual terms (FIDIC knowledge is an advantage).</li><li>Proficiency in cost estimation, pricing, and bid preparation.</li><li>Strong analytical and problem-solving abilities.</li><li>Excellent negotiation and communication skills.</li><li>Ability to manage multiple tenders simultaneously under tight deadlines.</li><li>Strong organizational and leadership skills.</li><li>Proficiency in Microsoft Office Suite, especially Excel and Word.</li><li>Experience with ERP systems (SAP, Oracle, or similar) and estimation software is preferred.</li><li>Excellent written and spoken English. Arabic language skills are an added advantage.</li></ul><h2>Key Competencies</h2><ul><li>Strategic thinking</li><li>Commercial awareness</li><li>Attention to detail</li><li>Decision-making</li><li>Leadership and team collaboration</li><li>Time management</li><li>Client-focused approach</li><li>Ability to work under pressure</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>FUNCTIONS: Performs basic troubleshooting on mechanical, hydraulic and pneumatic systems. Knowledge in maintenance of Reverse Osmosis plant including pumps, compressors, mixers, agitators, gearbox etc. Overhauling of centrifugal, single-stage, multi-stage pumps. Maintenance of micro filtrations, ultra-filtrations, RO systems. Installation and maintenance of sewage and wastewater pumps and mixers. Preventive, predictive, and corrective maintenance as per instructions from managers. Operation and maintenance of belt press and new installation. Servicing of submersible pumps and mixers in CETRP. Coordination with electrical, instrument, and operational team for effective maintenance. Assisting in asset condition assessment and timely reporting to the line managers. Effective handling of power tools and optimizing manpower usage. Keeping high standards in HSE compliance and reporting observations and improvement suggestions. Repair and replacement of all type of valves and actuators. Replacement of cartridge filters, strainers etc. Coordination with OEM and third party contractors for maintenance. Availability during holidays in case of any emergency requirements. Installation of new and serviced electromechanical equipment.</p><p>RESPONSIBILITIES: Repair and perform preventive and corrective maintenance as per established standards. Performs all duties according to Company Policies and Procedures. Execution of maintenance activities as per the lead instructions and keeping HSE standards. Adheres to company s Quality, Health &amp; Safety and Environment policies and procedures. Adheres to company s HR Policies and Procedures.</p><p>SKILLS PROFILE: Troubleshooting. Maintenance of rotating equipment. Handling of mechanical tools and power tools. Team Player. Self-motivated. Coordination skills.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>ACADEMIC BACKGROUND: Diploma Holder or 2-year technical course or relevant experience.</p><p>EXPERIENCE: Minimum of 3-5 years experience in the same field.</p><p>KNOWLEDGE OF: Technical procedures and safety. Methods and practices to be followed in the maintenance of tools, machinery, and equipment.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>This position is responsible for the technical design and execution of qualification programs and advanced power system simulations. The role focuses on ensuring that control engineers are qualified through rigorous simulation-based assessments using the Dispatcher Training Simulator (DTS). The Principal Engineer serves as the technical expert in modeling complex grid scenarios, including renewable penetration and market dynamics, to validate operational readiness. This function bridges the gap between theoretical system studies and real-time operational certification, ensuring the LDC team is equipped to handle contingencies and maintain grid stability.</p><p>Partner with Section Heads and Managers to conduct baseline competency assessments and design tailored training programs. Leads the technical development of simulation scenarios within the Dispatcher Training Simulator (DTS) to analyze various operational contingencies and conduct in-depth studies. Designs and executes the technical framework for the authorization and certification of LDC control engineers. Analyzes the penetration and effects of renewable generation on system operation to develop simulation-based mitigation strategies. Provides expert analysis and simulation-based reconstruction of sudden grid events to support root cause analysis. Monitors application system performance and tuning parameters to ensure simulation environments accurately reflect network dynamics. Develops technical training modules for LDC staff, focusing on high-standard technical outputs and mentoring. Identifies system operation bottlenecks during simulated contingencies and provides actionable recommendations for remedial actions. Assists in analyzing the technical impacts of the Spot Market on system operations during simulation cycles. Contributes to the security measures and crash recovery processes for the DTS and other training applications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in electrical Power Engineering</li><li>Advanced certification in Power System Simulation or Dispatcher Training Environments (preferred).</li><li>Minimum of 7 years experience in large, interconnected power system operations, specifically in system studies or simulation-based training.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons. Project Engineer who will be responsible for managing quantity surveying for major and extension projects shall undertake the following actions based on the project contract documents, approved documents on material submittals &amp; method statements:</p><p>Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p><p>Monitor all the cost and contractual aspect and report to the Client</p><p>Provide the required technical support, assistance and advice on all aspects of quantity surveying activities covering measurement, certification and payments</p><p>Collect and check quantity measurements from the project site and Prepare the Quantity Survey Reports</p><p>Prepare of monthly Contractor s Interim Payment Certificate and preparation of Final Account</p><p>Assist in the interpretation of the meaning or intent of the Contract Documents, and analysis of any claims which may be submitted by the contractor.</p><p>Review claims submitted by the contractor</p><p>Ensure that full documentation and records are maintained in the Client s office facility to properly substantiate all Interim and Final Payments to the contractor to a standard acceptable to the Client.</p><p>Ensure materials utilised at project site confirming to approved make and prepare report in case on non-conformance</p><p>Co-ordination with project managers</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in Engineering or related field. Professional engineering license preferred. In-depth knowledge of electrical systems, codes, and standards. Proven experience in project management and team leadership.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What if you could shape a career as unique as you? At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons.</p><p>Manage and oversee engineering projects from inception to completion. Develop project plans, schedules, and budgets, ensuring adherence to timelines and budgetary constraints. Coordinate with project stakeholders, including clients, contractors, architects, and regulatory agencies. Conduct regular site visits to monitor progress, quality of work, and adherence to safety protocols. Address any site-related issues promptly, providing technical guidance and solutions as necessary. Ensure compliance with relevant building codes, regulations, and environmental standards. Review project designs, specifications, and drawings to ensure accuracy and feasibility. Provide input during the design phase to optimize construction processes and materials selection. Collaborate with design teams to resolve any design-related issues or modifications.</p><p>Quality Assurance/Quality Control (QA/QC): Implement QA/QC procedures to ensure construction work meets established standards and specifications. Conduct inspections and tests to verify the quality of materials and workmanship. Document and report any non-conformities or deviations, and work towards timely resolution.</p><p>Work closely with architects, structural engineers, and other professionals to coordinate interdisciplinary aspects of projects. Foster a collaborative and positive work environment, encouraging effective communication and teamwork. Provide mentorship and support to junior engineers and site staff as needed.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Civil Engineering or related field. Master's degree preferred. Professional Engineer (PE) license or eligibility for licensure. Proven experience in Electrical engineering, with a focus on site management and construction. Strong knowledge of construction methods, materials, and techniques.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Civil Inspector to oversee and verify civil works for a Combined Cycle Gas Turbine (CCGT) power plant during construction and pre-commissioning. The role ensures compliance with drawings, specifications, ITPs, method statements, and applicable standards , with a strong focus on quality, safety, and timely delivery . You will work closely with the EPC/Contractor, Owner s Engineer, and HSE teams to ensure all civil and structural works meet project requirements.</p><p>Site Supervision &amp; Quality Control</p><ul><li>Inspect and supervise civil and structural works : foundations (GT/HRSG/STG/transformers), pedestals, pipe racks, control building, cooling towers/basins, chimneys/stacks, tanks, equipment foundations, culverts, underground utilities (stormwater, sewer, potable water, firewater), approach roads, pavements, trenching/backfilling, fencing, and buildings/ancillaries.</li><li>Verify compliance with approved IFC drawings , project specifications , ITPs , method statements , and codes/standards (e.g., ACI, ASTM, AISC/BS EN, BS 8007/BS 8110/Eurocodes where applicable).</li><li>Monitor and witness concrete works (formwork, rebar fixing, embed plates, anchor bolts, grouting), earthworks (compaction per Proctor/field density), asphalt , waterproofing , structural steel erection , painting/coating , rebar , precast , and piling (if applicable).</li><li>Review and approve material deliveries against MARs and MTCs ; ensure traceability and proper storage.</li><li>Coordinate material testing with labs: slump, compressive strength, trial mixes, FDT, plate load tests, rebar tensile/bend tests, weld NDT (if scope overlaps), coating DFT checks, etc.</li></ul><p>Documentation &amp; Reporting</p><ul><li>Implement and maintain inspection records , RFI/WIR logs, checklists , daily site reports , NCRs , SNCs , CARs , and punch lists .</li><li>Review and comment on method statements , ITPs , shop drawings , as-builts , and red-line markups .</li><li>Support QA/QC audits , root-cause analysis , and preventive/corrective actions .</li><li>Assist with turnover dossiers , as-built packages , and handover to commissioning for civil scope.</li></ul><p>Coordination &amp; HSE</p><ul><li>Interface with EPC/contractors , Owner s Engineer , client representatives , and multi-discipline teams (mechanical, electrical, I&amp;C) to plan civil works and resolve clashes (cable trenches vs foundations/utilities, elevations, sleeves, embeds).</li><li>Enforce HSE compliance per project HSE plan and Oman regulations; conduct toolbox talks related to civil activities; verify permits to work (PTW), lifting plans, excavations/shoring, confined space, and working at height controls.</li><li>Ensure temporary works design/inspection compliance (scaffolding tags, formwork stability, access platforms, edge protection).</li></ul><p>Schedule &amp; Progress</p><ul><li>Track daily/weekly progress against look-ahead schedules; flag risks/constraints (drawings, materials, manpower, plant).</li><li>Support readiness for commissioning by ensuring civil areas are defect-free and accessible; close punch items.</li></ul><p>Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma or Bachelor s in Civil Engineering or equivalent.</li><li>5 10 years of civil site supervision/inspection experience, with at least 3+ years on power plants (preferably CCGT or large industrial process plants).</li><li>Strong QA/QC background with hands-on experience in ITPs, method statements, RFIs, NCRs , and material testing .</li><li>Proven experience in: heavy foundations , equipment pedestals , anchor bolt alignment , grouting , underground utilities , roads &amp; drainage , structural steel , coatings , and buildings/architectural finishes .</li><li>Familiarity with relevant standards: ACI / ASTM / BS EN / AISC / Eurocodes , BS 8007 , BS 8110 (or current equivalents), ASD/ LRFD basics for steel verification.</li><li>Proficient in reading IFC drawings , rebar schedules , setting out , and as-built verification .</li><li>Excellent written/verbal communication in English ; ability to generate clear inspection reports.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wood is recruiting for a Control &amp; Automation Designer to join its Projects team focusing on delivering across FEED and Detail design scopes of work. Position is based in Muscat, Oman. This role will be developing C&amp;A design drawings and documents and provide expertise in drawing systems.</p><p>Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com</p><p>Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</p><p>What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p>Designing the future. Transforming the world</p><p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.</p><p>What we can offer</p><ul><li>Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors</li><li>Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.</li><li>Workmen s Compensation: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.</li><li>Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li></ul><p>Responsibilities</p><ul><li>Works closely with discipline project engineers/designers and other discipline engineers in the delivery of project engineering/construction deliverables, quality control drawings and overall project support.</li><li>Follow/ensure Quality Management System Requirements are met in line with ISO 9PHONE_NUMBER and API Q2 2nd edition requirements.</li><li>Develop designs in PDMS and (new) drawings in electronic format (AutoCAD).</li><li>Implement hand marked-up changes to drawings.</li><li>Maintain standard drawing templates.</li><li>Provides quality assurance reviews and detailed checking support.</li><li>Maintain and monitor drawing development progress.</li><li>Meet project commitments and deliver to schedule.</li><li>Identify &amp; implement process improvement to reduce cycle time &amp; cost.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum ITI or equivalent</p><p>Minimum 3 years in FEED/Engineering Experience and 6 years experience in the oil and gas industry with experience on major capital projects</p><p>Minimum of 5 years experience with 3D drawing systems (e.g. PDMS) and AutoCAD.</p><p>Technical knowledge of advanced 3D design applications and processes.</p><p>Efficiently uses Aveva software applications (i.e. PDMS design modules, forms/menus, REVIEW)</p><p>Knowledgeable of codes, standards and regulatory guidelines that apply to the design disciplines, specifically any API, CENELEC, IEC, IEC IP, IEEE, NEC, and NEMA standards.</p><p>Knowledgeable with designing industry related electrical and instrumentation deliverables (skids, equipment general arrangements, isometrics, plans, area classification drawings, single-lines, cable block diagrams, schematics, interconnect wiring diagrams)</p><p>Familiar with Electrical &amp; Instrumentation Data Handling Software, such as INTools, PowerGen, and any Programmable Logic Control or Digital Control System Software.</p><p>Is proficient in the use of human factors engineering guidelines and HSE best practices</p><p>Ability to work effectively in a team environment or independently with little guidance or supervision is required.</p><p>Knowledgeable of the interface points between design disciplines.</p><p>Is able to use Microsoft Word, Excel, Access, and PowerPoint.</p><p>Strong interpersonal and communications skills are highly desirable.</p><p></p></section>

<p><h4>Job overview</h4> <p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <h4>Principal accountabilities</h4> <ul> <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.</li> <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.</li> <li>Prepares AGE/FLSE and other equipment for exercises or actual deployments.</li> <li>Responds to enquiries concerning storage and status of assigned equipment.</li> <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.</li> <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.</li> <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.</li> <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.</li> <li>Orients new personnel to work crews, plans work assignments and establishes work methods.</li> <li>Conducts on-the-job training for AGE mechanics on assigned AGE/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.</li> <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.</li> <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.</li> <li>Prepares and submits quality/material deficiency reports and technical order changes as required.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.</li> <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Ensures that the work area is maintained to the highest standards of cleanliness.</li> <li>Attends AGE staff meetings as required.</li> <li>Prepares personnel performance reports as assigned.</li> <li>Performs TDY within the area of operations as required by the US Air Force/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</li> <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>Will be required to operate material handling equipment.</li> <li>High school diploma or equivalent required.</li> <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.</li> <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.</li> <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.</li> <li>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</li> <li>Will be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.</li> <li>Ideal candidate will have training as a USAF AGE, RED X certified inspector.</li> </ul> <h4>Compensation details</h4> <p>Hourly plus additional incentives.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting date: 05/04/2026 - Until filled.</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <h4>Equal opportunity statement</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p>Overall Purpose of the Role: A Sales Engineer, or Customer Engineer, is a sales professional who specializes in understanding all of the technical aspects of a technical Bus and explaining them to potential consumers. Their duties include consulting on bus development, explaining product features to customers during live demonstrations and negotiating contract terms.</p><p>Reporting To: Sales and Marketing Manager</p><p>Key Responsibilities:</p><ol><li>GENERAL AND TASK MANAGEMENT<br>Implement divisional set strategies to achieve growth objectives and enhance overall sales achievements.<br>Implement the Market segmentation strategies; Geographically and by type of business.<br>Screen the designated territory and classify customers accordingly.<br>Assist Customers to properly select the best commercial transport solution for their application upon gaining a clear understanding of their businesses and requirements; Establish and maintain good working relationships with them to encourage repeat and referral business.<br>Monitor market and competitor activity, trends and demands, and inform appropriate persons within the organization<br>Develop an in depth understanding of the customers business and identify sales opportunities for products.<br>Prepare and deliver product technical presentations that explain product features, competitive advantages, or services to prospective customers.<br>Ability to work in a high-stress sales environment and multitask<br>Work closely with operations team to understand the different features available in KM products.<br>Prepare monthly and weekly sales reports to the management.<br>Answer and receive enquiries from various national and international customers.<br>Participate in national and international exhibitions, meetings to ensure having a good place in market.<br>Conduct market research and prepare market forecast report to the line manager to be presented in the market.<br>Following up the market trend and knowing the GCC and MENA region bus industry references.</li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li>Excellent knowledge in bus application and segments.</li><li>Excellent drive line technical knowledge</li><li>Excellent telematic and ITS knowledge</li><li>Proven Sales experience</li><li>Team player, Exceptional Presentation Skills, Proactive work style, creativity, energy</li><li>Excellent Knowledge of office management systems and procedures.</li><li>Excellent time management skills and ability to multi-task and prioritize work.</li><li>Attention to detail and problem-solving skills.</li><li>Excellent written and verbal communication skills.</li><li>Strong organizational and planning skills.</li><li>Excellent Interpersonal skills.</li><li>Excellent customer services attitude.</li><li>Excellent Negotiation and social problem-solving skills.</li><li>Ability to work in a high-stress sales environment and multitask</li><li>Bachelor s Degree in Business administration, Sales and Marketing or Mechanical /Electrical Engineering.</li><li>Proficiency in the use of Personal Computers, and knowledge of Microsoft applications.</li><li>Professional experience in the Truck Business, medium or heavy duty.</li><li>Commercial Automotive or Heavy Equipment.</li><li>Vast Knowledge of the local Gulf market dynamics.</li><li>Able to communicate fluently in English, written and spoken.</li><li>Arabic is a definite plus.</li><li>Minimum of 5 years of Sales experience in Automotive industry.</li><li>After-sales experience.</li></ul>

<p>Our client is one of the leading providers of Information and Communication Technology (ICT) to service providers currently looking for Automated Operations Engineer (1st Level Operations Telecommunication Managed Services) We are now looking for an Automated Operations Engineer within the Managed Services Ist-level Operations organization that will support the realization of solutions by providing specialized technical expertise on intelligent network systems. As an Automated Operations Engineer, you will be involved in crafting schema objects (facts, attributes, hierarchies, transformations) to develop application objects. You will also craft and create Bl reports and dashboards, write scripts and programs to automate manual work, and improve operations. This role involves maintaining, debugging, troubleshooting systems and software to ensure maximum efficiency.</p><p>Duties &amp; Responsibilities:</p><ul><li>Be responsible for real-time monitoring alarms and performance information on a 24x7 basis</li><li>Perform initial analysis to identify issues follow by restoration if possible (1st line of Support)</li><li>Perform detection, classification, correlation, and accurate escalation of network incidents according to the agreed escalation matrix.</li><li>Being able to work with a variety of tools</li><li>Be able to perform Alarm Surveillance, Trouble T-icket Management, Change Management Support for 1st Level Service Restoration Activities.</li><li>Be able to manage complaints from Customer Care.</li><li>Be able to ensure Adherence to all Processes.</li><li>Be responsible to escalate within the department / group as well as to service support units (ASP) / supplier partner functions so that service layer may be maintained at specified level.</li><li>Be able to execute Front office activities and routines according to schedules defined by Shift Team Leaders/NOC Manager.</li><li>Be able to send/receive/follow up with trouble reports sent to the delivery units/supplier/customer.</li><li>Be responsible for Remote Service Corrective, Preventive Maintenance.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Electrical Engineering / Telecommunication Engineering / Computer Science / Computer Engineering or equivalent.</li><li>Minimum 2-4 years of experience in Operation &amp; Maintenance implementation, Fault management/ performance management</li><li>Must have experience in working on UOC OSS tools</li><li>Good Multi-Vendor System knowledge</li><li>Proficient command of English is required</li><li>Experience in Performance KPls &amp; CEM KQls will be plus</li><li>Hands-on experience in automation will be advantageous</li><li>Monitoring of all alarms on RAN, Transmission, Core via NMS Nodes when required.</li></ul><p>Professional/Technical Competencies:</p><ul><li>Proficient knowledge of Access, Core, and IP/Transport Networks</li><li>Must be skilled in the network topology, its traffic handling capabilities and traffic characteristics.</li><li>Efficient knowledge of network performance/configuration parameters and their interpretation and use is critical.</li><li>Must be network service/performance focused</li><li>Adept expertise in network operation processes and interfaces</li><li>Advanced knowledge of operating network implementation/integration processes</li><li>Experience in the field of Mobile Network O&amp;M is essential</li><li>Agility and the vigor to work optimally in a fast-paced environment</li><li>The ability to direct a team and do optimum shift workload distribution</li></ul>

<p>Job Contents: </p> <p>The primary objective of this role is to provide strategic guidance, technical leadership, and expertise in Supervisory Control and Data Acquisition (SCADA) systems to support the organization's goals and objectives. This role plays a critical role in advising on the design, implementation, optimization, and maintenance of SCADA systems, ensuring alignment with industry best practices, regulatory requirements, and business needs. This Role aims to drive innovation, efficiency, reliability, and scalability in SCADA system projects and operations. Additionally, the role involves mentoring junior engineers, collaborating with cross-functional teams, staying abreast of emerging technologies and trends.</p> <p> Responsible for Managing SCADA Master systems, Data Analytics &amp; other related applications of OETC transmission network.</p> <p> Provide expert guidance and advisory services on SCADA system architecture, design, and implementation strategies to meet organizational objectives.</p> <p> Provide technical expertise and support to SCADA system engineers, and operations personnel during installation, maintenance, and troubleshooting activities.</p> <p> Conduct comprehensive assessments of existing SCADA systems, identifying areas for improvement and recommending solutions to enhance efficiency, reliability, and cybersecurity.</p> <p> Maintaining SCADA Communication servers (FEPs) and troubleshooting any communication issue.</p> <p> Managing and configuring e-terracontrol and all its related tools and functionalities</p> <p> Experience with e-terrasource and the process of integrating new Gris stations as well as modifying existing ones.</p> <p> To improve and enhance the process of adding new GS into GE e-terraplatform system.</p> <p> Maintaining total hardware in the control center(s), preventive maintenance at various levels with the support of SCADA team</p> <p> System administration, network administration, e-terra patch updates, Antivirus patch updates.</p> <p> Review of the specifications of future Projects, Design documents review and approval. Project implementation support</p> <p> Helping in building technically strong permanent team for OETC</p> <p> Reporting major changes/bugs in the system in advance to GE, which are hampering daily operations.</p> <p> Collaborating with engineering teams to develop and implement SCADA/Data analytics strategies that optimize operational efficiency, reliability, and performance.</p> <p> Develop policies, procedures and processes for the SCADA systems and ensure the implementation of these policies and procedures by other staff.</p> <p> Sharing skills and experience with colleagues and supporting the development of staff.</p> <p> Troubleshooting and resolving technical issues related to SCADA systems, including communication failures, data discrepancies, and software glitches.</p> <p> Assisting EMS Engineer for Database Modifications.</p> <p> Configuration and customization of Software Database, mimics, reports, cases, historic, data.</p> <p> Centralized archiving, data storage and retrieval facilities.</p> <p> <strong>Job Qualifications and Experience</strong> </p> <p> <strong>Minimum Qualifications</strong> </p> <p> Bachelor s Degree in Electrical / Instrumentation / Electronics / computer Engineering </p> <p> <strong>Professional Experience </strong> </p> <p> Minimum 7 years of hands-on experience</p> <p>Certification Required Recommended</p> <p>Networking &amp; Security:</p> <p> Cisco CCNA / CCNP</p> <p> Fortinet NSE / Palo Alto PCNSE</p> <p> CISSP (Certified Information Systems Security Professional)</p> <p>Microsoft &amp; Directory Services:</p> <p> VMware Certified Professional</p> <p> Microsoft Certified: Azure Administrator Associate</p> <p> Microsoft Certified: Identity and Access Administrator Associate</p> <p> </p> <p> </p> <p> </p>

<p>JOB CONTENT </p> <p>Ensures the reliability, availability, and performance of OETC s assets. This role involves developing and optimizing maintenance plans using CMMS and leveraging data from the online condition monitoring system. The engineer ensures alignment with global best practices, including ISO 55001, and collaborates with cross-functional teams to address asset performance issues and enhance maintenance strategies</p> <p> Assist with the development of Asset Performance Framework, Strategies, Objectives, Plans, and Asset Risk Register.</p> <p> Develop, upload, and manage annual maintenance plans in the CMMS, utilizing historical data and asset performance trends to optimize reliability and minimize downtime</p> <p> Assist in the development and implementation of best-practice asset management standards, policies, and procedures in line with ISO 55001 and other global standards</p> <p> Review, validate, and update work orders in the CMMS to ensure accuracy, completeness, and compliance with maintenance schedules</p> <p> Identify and address missing, overdue, or incomplete work orders, ensuring data integrity and timely execution of maintenance tasks</p> <p> Monitor the execution of maintenance activities to ensure compliance with approved plans, schedules, and quality standards</p> <p> Follow up on incomplete or delayed maintenance tasks, coordinating with relevant teams to resolve issues and minimize disruptions</p> <p> Prepare and present maintenance progress reports, highlighting key achievements, challenges, and areas for improvement</p> <p> Work closely with relevant departments, including operations, performance engineering, and field teams, to ensure effective maintenance planning and execution</p> <p> Ensure seamless integration of OLCM data with the CMMS to enable data-driven decision-making</p> <p> Collaborate with performance engineers to analyze asset performance data, identify reliability and asset health risks, and provide input to develop proactive and targeted maintenance strategies</p> <p> Highlight performance-related concerns and incorporate them into maintenance plans to address potential risks and improve asset reliability</p> <p> Provide feedback to performance engineers on maintenance outcomes to support continuous improvement and innovation in asset management practices</p> <p> Contribute to continuous improvement initiatives by identifying opportunities to enhance maintenance planning, execution, and asset performance</p> <p> Contribute to the preparation of business and work plans to achieve technical deliverable</p> <p> Manage and review critical spares requirements, coordinating with procurement and inventory teams to ensure the timely availability of resources, tools, and spare parts, minimizing downtime during maintenance activities</p> <p> Contributes to continuous improvement and innovation in optimized asset maintenance plans.</p> <p> Adhere to the Company s health, safety, environmental and security policies always and immediately report violations of these policies to OETC health, safety &amp; environment representatives;</p> <p> Knowledge and Understanding of Asset Management, HSE Management System and IT Security Standard Requirements according to ISO55001, ISO 14001, ISO45001 and ISO 27001 to carry out the assigned duties as per the roles and responsibilities matrix.</p> <p>Job Qualifications and Experience</p> <p>Minimum Qualifications</p> <p> Bachelor s degree in electrical Power Engineering or equivalent </p> <p>Professional Experience </p> <p> 5+ years business experience in the utility of Transmission business</p> <p> </p> <p> </p>

<p>To lead and execute the preparation of accurate cost estimates and tender submissions for utilities, infrastructure, and civil projects and to ensure all estimates are based on complete and verified technical and commercial data. To coordinate with engineering, procurement, and project teams to develop competitive and compliant proposals and to support management in pricing strategies and value engineering to secure new business opportunities.</p><p>Operational</p><ul><li>Review tender documents, drawings, specifications, and bill of quantities (BOQ) to identify scope, requirements, and risks.</li><li>Prepare detailed cost estimates, including materials, labor, equipment, and subcontractor costs.</li><li>Coordinate with procurement for material quotations and supplier comparisons.</li><li>Liaise with subcontractors to obtain competitive prices and technical compliance.</li><li>Evaluate technical addenda, clarifications, and pre-bid queries to ensure full understanding of tender requirements.</li><li>Support the preparation of tender summaries, cost breakdowns, and commercial evaluations.</li><li>Ensure all estimates comply with company policies, project specifications, and client requirements.</li></ul><p>Value Engineering &amp; Cost Optimization</p><ul><li>Identify cost-saving alternatives and innovative construction methods to improve competitiveness.</li><li>Review and optimize resource allocation, productivity norms, and material selections.</li><li>Contribute to the development of pricing strategies for major bids.</li></ul><p>Coordination &amp; Documentation</p><ul><li>Collaborate with engineering, planning, and project teams for technical input and constructability reviews.</li><li>Maintain an organized database of rates, cost information, and historical project data.</li><li>Ensure proper documentation and filing of tender submissions and correspondence.</li></ul><p>Management &amp; Leadership</p><ul><li>Guide and review the work of junior estimators, ensuring accuracy and consistency.</li><li>Participate in tender review meetings, bid evaluations, and management presentations.</li><li>Support post-tender clarifications, negotiations, and contract finalization as required.</li></ul><p>Health, Safety, Environment &amp; Quality</p><ul><li>Aware of HSE company policy.</li></ul><p>1. KEY PERFORMANCE INDICATORS (KPIs)</p><ul><li>Accuracy and completeness of cost estimates and tender submissions.</li><li>Number of tenders delivered on time and in compliance with client requirements.</li><li>Success rate of bids and tenders submitted.</li><li>Effectiveness in cost optimization and value engineering initiatives.</li><li>Quality of coordination and communication with internal and external stakeholders.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>2. QUALIFICATIONS, EXPERIENCE &amp; SKILLS</h2><ul><li>Bachelor s degree in civil, Mechanical, or Electrical Engineering.</li><li>Minimum 8 12 years of experience in estimation and tendering within utilities, infrastructure, or heavy civil projects.</li><li>Strong knowledge of estimation software, pricing methodologies, and market rate analysis.</li><li>Proficiency in MS Excel, AutoCAD, and Primavera (for BOQ/time correlation).</li><li>Excellent analytical, numerical, and negotiation skills.</li><li>Strong attention to detail and ability to work under tight deadlines.</li><li>Familiarity with Omani construction market, cost structures, and local suppliers/subcontractors.</li></ul><h2>3. RELATIONSHIPS</h2><ul><li>Internal: Estimation Lead / Commercial Manager.</li><li>Coordinate with Engineering, Planning, Procurement, and Project Teams.</li><li>Supervise Junior Estimators.</li><li>External: Liaise with clients, consultants, subcontractors, and suppliers for tender-related clarifications and quotations.</li><li>Engage with government and private entities for prequalification and bidding opportunities.</li></ul>

<p>The Senior Power System Secondary Engineer acts as the technical authority on behalf of the project developer, providing independent oversight, review, and verification of all secondary systems engineering across utility-scale renewable energy plants (Solar PV, Wind) and Battery Energy Storage Systems (BESS). The role is pivotal in ensuring that designs delivered by EPC contractors and specialist consultants are technically sound, safe, cost-effective, and fully compliant with International Best Practices, utility / TSO requirements, and applicable International Standards (IEC, IEEE/ANSI). </p><br><p>Design Review & Verification</p><ul><li><p>Lead the review and verification of all secondary design deliverables — including Single Line</p></li></ul><p>Diagrams (SLDs), Protection & Metering Diagrams (PMDs), Block Logic Diagrams (BLDs), AC/DC</p><p>schematics, and LV System Design Documents — for HV substations and renewable plants.</p><ul><li><p>Verify protection and control philosophies, including relay settings, selectivity analyses, and</p></li></ul><p>coordination studies (short-circuit calculations, CT/VT sizing) prepared by consultants and EPC</p><p>contractors.</p><ul><li><p>Review and approve interlocking schemes, bay-level logic, and station-level automation across</p></li></ul><p>switchgear, transformers, feeders, and renewable energy plant interfaces.</p><p>Substation Automation & SCADA</p><ul><li><p>Approve substation automation and SCADA architectures, ensuring correct implementation of IED</p></li></ul><p>logic, signal lists, and interlocking schemes at bay and station levels.</p><ul><li><p>Oversee the integration and configuration of communication protocols — IEC 61850</p></li></ul><p>(GOOSE/SV/MMS), IEC 60870-5-104, and DNP3 — governing data flow between Plant Power</p><p>Controllers (PPC/EMS), substations, and utility control centers.</p><ul><li><p>Review IED configurations, substation HMI displays, and historian / data management architectures</p></li></ul><p>for completeness and compliance.</p><p>Telecommunications & Cybersecurity</p><ul><li><p>Review and validate communication and telecommunication architectures, including managed</p></li></ul><p>network design (VLANs, PRP/HSR redundancy), cybersecurity policies (IEC 62351 / NERC-CIP</p><p>aligned), and tele-protection performance requirements.</p><p>Standards, Compliance & Grid Code Adherence</p><ul><li><p>Ensure strict adherence to international standards and grid codes (IEC, IEEE/ANSI) by performing</p></li></ul><p>technical audits and vetting technical submissions to Transmission / Distribution System Operators</p><p>(TSO/DSO).</p><ul><li><p>Manage technical interfaces and coordinate between EPC contractors, engineering consultants,</p></li></ul><p>OEMs, and the grid operator to ensure a coherent and optimized secondary systems design.</p><p>Testing, Commissioning & Project Governance</p><ul><li><p>Provide technical governance during critical project phases, including witnessing Factory</p></li></ul><p>Acceptance Tests (FAT) and Site Acceptance Tests (SAT), and reviewing commissioning</p><p>procedures for all secondary systems.</p><ul><li><p>Review and approve test plans, testing protocols, punch lists, and commissioning records to ensure</p></li></ul><p>safe energization of HV substations and plant systems.</p><ul><li><p>Act as the Owner’s Engineer representative in te</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education</p><ul><li><p>Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or a closely related field.</p></li><li><p>Professional Engineering registration (PE / CEng or equivalent) is an advantage.</p></li></ul><p>Experience</p><ul><li><p>8+ years of engineering experience with a demonstrable focus on substation secondary systems</p></li></ul><p>design and delivery.</p><ul><li><p>Significant experience in a developer, owner’s engineer, or utility role with direct responsibility for</p></li></ul><p>managing and challenging EPC contractor deliverables.</p><ul><li><p>Proven track record on grid-connected utility-scale renewable energy projects (Solar PV, Wind)</p></li></ul><p>and/or Battery Energy Storage Systems (BESS).</p><ul><li><p>Experience working across the full project lifecycle from FEED and detailed design through to FAT,</p></li></ul><p>SAT, and commercial operation</p>

<p>Reporting To: Procurement &amp; ICV Director Role Objective: The Contracts Specialist is responsible for the end-to-end contracting and technical procurement process for projects and operational requirements, ensuring commercially sound contracts, effective risk management, regulatory and successful project delivery, procurement planning, spend monitoring, cost savings reporting, KPI reporting, and ensuring compliance with company procurement policies and procedures. Duties and Responsibilties: Review, assess, and process technical procurement requests, ensuring completeness of specifications, scope of work, and commercial requirements. Prepare and manage tendering processes for technical projects, including RFQs, RFPs, ITTs, bid evaluations, and recommendation reports. Develop, draft, negotiate, and administer contracts, agreements, purchase orders, and amendments in compliance with company policies and applicable regulations. Coordinate with end users, engineering, operations, project teams, and other stakeholders to clarify technical and contractual requirements. Lead commercial and contractual evaluations of bids, ensuring best value, risk mitigation, and compliance with technical specifications. Support project procurement activities from initiation through contract award, execution, performance monitoring, and closeout. Manage contract execution, monitor contractor performance, and ensure compliance with contractual obligations, milestones, deliverables, and service levels. Identify and mitigate contractual, commercial, and operational risks associated with technical procurement activities and projects. Prepare contract correspondence, notices, variation orders, claims assessments, extensions of time, and dispute resolution documentation when required. Maintain contract records, procurement files, and documentation to ensure audit readiness and regulatory compliance. Liaise with suppliers, contractors, and consultants to resolve contractual and commercial issues and facilitate successful project delivery. Support supplier prequalification, vendor performance evaluation, and contractor relationship management initiatives. Ensure all procurement and contracting activities comply with approved delegation of authority, governance requirements, and applicable laws and regulations. Contribute to cost optimization, value engineering, and continuous improvement initiatives across procurement and contract management processes. Provide contractual and commercial advice to project teams and internal stakeholders throughout the project lifecycle.</p><p><strong>Desired Candidate Profile</strong></p><h2>Education and Qualification:</h2><p>Bachelor's Degree in Procurement &amp; Supply Chain Management, Business Administration, Engineering (Mechanical, Electrical, Civil, Industrial, or related discipline), Quantity Surveying, Commercial Management, Law (Contract Law or Commercial Law) or Project Management.</p><p>Preferred certifications include: MCIPS (Member of the Chartered Institute of Procurement &amp; Supply), PMP (Project Management Professional), CCM (Certified Commercial Contracts Manager), CPCM (Certified Professional Contracts Manager), Certified Procurement Professional (CPP) or Certified Supply Chain Professional (CSCP)</p><h2>Experience:</h2><p>Minimum 4 years of experience in contracts management, procurement, tendering, or commercial management. Proven experience in tendering, bid evaluation, contract negotiation, contract administration, and claims management.</p><h2>Special Skills and Knowledge:</h2><ul><li>Strong understanding of contract law and commercial terms.</li><li>Experience with RFQ, RFP, ITT, and tender management processes.</li><li>Ability to review technical specifications and scope of work documents.</li><li>Knowledge of project procurement and contract lifecycle management.</li><li>Strong negotiation, analytical, and stakeholder management skills.</li><li>Excellent report-writing and communication skills.</li><li>Contract Administration &amp; Compliance Management</li><li>Claims, Variations &amp; Change Order Management</li><li>Contractor Performance Management</li><li>Commercial Risk &amp; Dispute Resolution</li><li>Contract Close-Out &amp; Final Account Settlement</li></ul>

<ul><li><p>Develop production action plan as per OPC farms requirments </p></li><li><p>Develop & supervise preventive maintenance action plan </p></li><li><p> Lead the implementation of actions plan to ensure right feed type at right location/farm</p></li><li><p>Schedule the raw materials arrangement, items and spare parts availability used at feed mill to scure unintrupted feed supply </p></li><li><p>Schedule productions according to weekly plan forwarded by Operation manager/ Plot site managers </p></li><li><p>Ensure the clean, disinfection, fumigation and sterilization for store, silo and other facilities as per plan </p></li><li><p>Ensure the additives and premix stock , raw materials avaialbility in accordance to production plans </p></li><li><p>Ensure receipt of raw materials and items accordance the specification and quantities required </p></li><li><p>Ensure the storage requirments accordance to standards </p></li><li><p>Ensure the right working time of Silo fan </p></li><li><p>Manage load of raw materials process. </p></li><li><p>Manage & monitor closely manufacturing process </p></li><li><p>Evaluate the out put of production quantity with raw materials consumed to evaluate losses </p></li><li><p>Ensure the efficiency of production comparing to standard </p></li><li><p>Ensure the quality of production with lowest cost and suitable time </p></li><li><p> Ensure the right utilize of resource to optimise mill efficinecy </p></li><li><p> Manage the preventive, corrective and emergency breakdown and maintenance </p></li><li><p>Manage the electrical, mechanical installations works </p></li><li><p> Ensure the efficiency of machinery, equipment's and boiler </p></li><li><p> Follow up all records includes parameters, compressor, motor control center (MCC) readings, cold rooms, machine and boiler bearing temperature </p></li><li><p> Ensure the efficiency of sieve & keep the repord </p></li><li><p> Ensure the right chemical dose at boiler & record to be registered </p></li><li><p> Ensure the right water quantity used at boiler </p></li><li><p>Ensure the right utilize of energy and diesel </p></li><li><p>Ensure the conservation and optimal use of energy, diesel, machine and equipment's </p></li><li><p> Ensure the implant of greasing work process </p></li><li><p>Ensure the documentation of all operation process as per ISO, HACCP and FSMS certifications </p></li><li><p>Submit the necessary reports related to the aforementioned topics </p></li><li><p> Rotate to provide services according to company working shift </p></li><li><p>Any work if and when required </p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Manage Feed manufacturing process to ensure the availability of quality feed to flocks , production starting from receiving raw materials, maintenance of, equipment's and boiler, manage the necessary maintenance to ensure the efficiency and progress of manufacturing</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are supporting a hospitality investment and asset management group in Oman with the appointment of a Technical Asset Manager . This is an excellent opportunity for a technical hospitality professional to join an owner-side asset management function and support the maintenance, condition, technical performance, and long-term value of a hotel portfolio. Role Overview The Technical Asset Manager will be responsible for planning, monitoring, and controlling maintenance, facilities operations, and technical asset management activities across operating hotel assets and shareholder properties. The role will work closely with hotel operators, General Managers, engineering teams, consultants, contractors, service providers, specialist vendors, and internal stakeholders to ensure that hotel assets are well maintained, compliant, cost-controlled, and aligned with ownership objectives. This is a portfolio-level technical asset management role. The successful candidate will support CAPEX planning, Property Improvement Plans, asset condition reviews, lifecycle maintenance planning, contractor performance, technical reporting, and operational readiness across existing assets, renovations, handovers, and hotel pre-opening or transition phases.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Engineering, preferably Mechanical, Electrical, Civil, Facilities Management, or another relevant technical discipline.</p><p>6 10 years of relevant experience in hotel engineering, technical asset management, facilities management, maintenance planning, project coordination, or owner-side asset operations.</p><p>Proven exposure to hotel operations, multi-asset portfolios, CAPEX planning, Property Improvement Plans, contractor management, and asset condition reviews.</p><p>Strong technical understanding of hotel engineering, building systems, maintenance standards, asset condition assessment, and lifecycle planning.</p><p>Experience reviewing and monitoring OPEX, CAPEX, renovation, upgrade, and property improvement works.</p><p>Strong understanding of HSE standards, statutory compliance, technical standards, and contractor management requirements.</p><p>Strong project and stakeholder management skills, with the ability to work effectively with hotel operators, General Managers, engineering teams, consultants, contractors, vendors, and internal teams.</p><p>Hands-on and execution-oriented approach, with strong cost awareness, attention to detail, and the ability to manage multiple hotel assets, urgent maintenance matters, and CAPEX works.</p><p>Professional certifications such as PMP, CFM, FMP, hospitality engineering, asset management, or equivalent would be an advantage.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced and results-driven <strong>HVAC Sales Engineer</strong> to join our growing team in <strong>Oman</strong>. The ideal candidate will have a strong background in HVAC project sales and business development, with proven experience selling Air Conditioning systems including <strong>Split AC, Ducted AC, Window AC, VRF/VRV systems</strong>, and related MEP solutions within the <strong>Oman/GCC market</strong>.</p><p>This role requires a proactive sales professional who can identify project opportunities, build strong relationships with contractors, consultants, developers, and end-users, and drive sustainable revenue growth.</p><p>Key Responsibilities</p><ul><li><p>Drive sales of Split AC, Window AC, Ducted AC Systems, VRF/VRV Systems, and associated MEP products for projects.</p></li><li><p>Generate new business through market visits, client meetings, networking, and business development activities.</p></li><li><p>Identify potential accounts and develop relationships with MEP contractors, consultants, developers, and project clients.</p></li><li><p>Promote and sell HVAC products along with related MEP solutions based on customer and project requirements.</p></li><li><p>Manage project sales opportunities and actively follow up on leads to achieve monthly and annual sales targets.</p></li><li><p>Build and maintain strong customer relationships to support long-term business growth.</p></li><li><p>Monitor market trends, competitor activities, and emerging project opportunities.</p></li><li><p>Coordinate with engineering, estimation, and project teams to ensure successful project execution and customer satisfaction.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum <strong>2-3 years of Oman/GCC experience</strong> in HVAC/AC project sales.</p></li><li><p>Strong experience in selling <strong>Split AC, Window AC, Ducted AC, and VRF/VRV Systems</strong>.</p></li><li><p>Previous experience working with reputed HVAC/AC brands is highly preferred.</p></li><li><p>Engineering background preferred.</p></li><li><p>Proven track record in business development, project sales, and customer relationship management.</p></li><li><p>Strong network with MEP contractors, consultants, developers, and project owners in Oman is an advantage.</p></li><li><p>Excellent communication, negotiation, and presentation skills.</p></li><li><p>Ability to work independently and drive sales growth.</p></li><li><p>Valid Oman Driving License is preferred.</p></li></ul><p>Preferred Qualifications</p><ul><li><p>Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related engineering field.</p></li><li><p>Experience in project sales of HVAC/AC equipment within the <strong>Oman market</strong>.</p></li><li><p>Familiarity with <strong>Oman Building Code</strong>, local MEP standards, and HVAC installation practices.</p></li><li><p>Knowledge of project cost estimation, BOQ analysis, tendering, and contract documentation.</p></li><li><p>Experience using CRM software and preparing technical and commercial proposals.</p></li></ul><p></p></section>