Client of Tawzef jobs

<p>Lead and coordinate all DRI plant activities during the assigned shift. Participate in project execution, equipment installation verification, system walk-downs, punch-list clearance and mechanical completion. Review P&amp;IDs, process flow diagrams, operating philosophies, equipment specifications and control narratives. Support pre-commissioning and commissioning activities including flushing, blowing, hydrotesting, leak testing, loop checking and equipment trials. Lead plant start-up, stabilization, normal operation and planned/emergency shutdown activities. Monitor and optimize major process areas including the reduction reactor/shaft furnace, Process Gas Heater (PGH), process gas circuit, CO removal system, natural-gas system, water-treatment facilities and associated utilities. Ensure process parameters remain within operating limits to achieve required DRI/HBI quality and production targets. Coordinate closely with panel operators, field operators, maintenance, electrical, instrumentation, laboratory and other supporting functions. Identify process deviations and equipment abnormalities and lead first-line troubleshooting. Ensure strict compliance with Permit to Work, LOTO, confined-space, gas-safety and other HSE procedures. Maintain accurate shift logs, production reports, abnormality reports and shift handover documentation. Develop and review SOPs, operating checklists and emergency operating procedures. Coach and supervise operators and ensure effective allocation of manpower during shifts. Support continuous improvement initiatives related to plant availability, productivity, energy efficiency and operational reliability.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Chemical Engineering/Science or Diploma in Chemical Engineering or equivalent. Minimum 8 years' relevant experience for degree holders or 12 years for diploma holders. At least 3 years' experience as a Shift Production Supervisor/Shift In-Charge in a DRI or comparable continuous-process facility. Strong preference for experience in Tenova HYL/Energiron and/or Midrex DRI plants. Previous greenfield, brownfield expansion, revamp or commissioning experience is highly desirable. Strong understanding of DRI process chemistry, reducing-gas systems, natural-gas handling, CO removal, water treatment and process utilities. Demonstrated leadership, troubleshooting and shift-management capabilities. Strong commitment to process safety and safe plant operation.</p>

<p>Lead electrical maintenance activities during the assigned shift. Supervise electrical technicians and coordinate daily maintenance activities. Perform and oversee preventive and corrective maintenance. Troubleshoot electrical equipment failures and minimize plant downtime. Maintain electrical systems including transformers, motors, MCCs, PCCs, and UPS systems. Support major and minor plant shutdown activities. Plan and monitor preventive maintenance activities through SAP. Ensure compliance with electrical safety standards and HIRA requirements. Coordinate maintenance activities with Operations and other departments.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in electrical engineering with minimum 10 years of relevant experience; OR Diploma in Electrical Engineering with minimum 15 years of relevant experience.</li><li>Strong experience in Electrical Maintenance within a Continuous Process Plant environment.</li><li>Experience with transformers, MCCs, PCCs, UPS systems, industrial motors, cranes, and lighting systems.</li><li>Strong preventive and breakdown maintenance experience.</li><li>Experience in plant shutdown activities.</li><li>Knowledge of SAP maintenance systems.</li><li>Previous team/shift leadership experience.</li><li>Strong troubleshooting and decision-making skills.</li><li>Good English communication skills.</li></ul>

<p>Install, calibrate, test, and maintain field instruments, transmitters, analyzers, and control valves. Perform cable laying, glanding, termination, loop checking, and testing. Conduct preventive and corrective maintenance of instrumentation equipment. Troubleshoot field devices, marshalling cabinets, and basic control-system faults. Maintain maintenance records and comply with PTW, LOTO, and hazardous-area procedures.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in Instrumentation/Electronics Engineering with 5 8 years of experience, or ITI with 8 12 years.</li><li>At least 5 years of experience in MIDREX or HYL plants.</li><li>Ability to read P&amp;IDs, loop diagrams, wiring diagrams, and datasheets.</li><li>Good knowledge of calibration, troubleshooting, and safety procedures.</li></ul>

<p>Conduct routine plant rounds and inspect assigned process areas. Support system walk-downs, punch-list clearance and mechanical completion activities. Participate in flushing, blowing, loop checking, leak testing and functional testing during commissioning. Perform equipment and process line-ups according to approved operating procedures. Operate field equipment associated with the reduction shaft/reactor, process gas circuit, Process Gas Heater and material-handling systems. Start and stop pumps, fans and other auxiliaries as instructed by the control room. Monitor equipment for leaks, unusual vibration, noise, temperature or other abnormalities. Read local gauges and instruments and communicate field readings to the Panel Operator. Assist during plant start-up, stabilization and shutdown activities. Support equipment isolation and reinstatement in coordination with operations and maintenance. Maintain field logbooks and operating checklists. Follow strict safety precautions when working around natural gas, hydrogen-rich reducing gas and carbon monoxide. Immediately report unsafe conditions, gas leaks, equipment abnormalities and process deviations. Maintain good housekeeping and operational discipline throughout assigned areas.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 1 year of relevant experience for degree holders or 4 years for diploma holders.</li><li>At least 1 year as a Shift Field Operator in an industrial process plant.</li><li>Experience in HYL/Energiron DRI, Midrex DRI, fertilizer, petrochemical or similar gas-based process plants is preferred.</li><li>Basic understanding of DRI processes, PGH, natural-gas handling and water-treatment systems.</li><li>Ability to understand P&amp;IDs, equipment identification and operating procedures.</li><li>Knowledge of industrial safety, PTW and LOTO practices.</li></ul>

<p>Install, calibrate, test, and maintain field instruments, transmitters, analyzers, and control valves. Perform cable laying, glanding, termination, loop checking, and testing. Conduct preventive and corrective maintenance of instrumentation equipment. Troubleshoot field devices, marshalling cabinets, and basic control-system faults. Maintain maintenance records and comply with PTW, LOTO, and hazardous-area procedures.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in Instrumentation/Electronics Engineering with 5-8 years of experience, or ITI with 8-12 years.</li><li>At least 5 years of experience in MIDREX or HYL plants.</li><li>Ability to read P&amp;IDs, loop diagrams, wiring diagrams, and datasheets.</li><li>Good knowledge of calibration, troubleshooting, and safety procedures.</li></ul>

<p>Perform electrical installation, inspection, testing, and maintenance activities at site. Carry out cable termination, temporary power arrangements, earthing, and illumination checks. Conduct continuity, insulation-resistance, and load-current tests. Identify and report electrical defects and safety risks. Support daily electrical maintenance and construction activities as directed.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in Electrical Engineering or ITI certification.</li><li>Minimum 5 years of construction-site or industrial electrical experience.</li><li>Ability to use multimeters, clamp meters, and insulation-resistance testers.</li><li>Good understanding of electrical ratings, cable termination, testing, earthing, and electrical safety.</li></ul>

<p>Lead electrical maintenance activities during the assigned shift. Supervise electrical technicians and coordinate daily maintenance activities. Perform and oversee preventive and corrective maintenance. Troubleshoot electrical equipment failures and minimize plant downtime. Maintain electrical systems including transformers, motors, MCCs, PCCs, and UPS systems. Support major and minor plant shutdown activities. Plan and monitor preventive maintenance activities through SAP. Ensure compliance with electrical safety standards and HIRA requirements. Coordinate maintenance activities with Operations and other departments</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in electrical engineering with minimum 10 years of relevant experience; OR Diploma in Electrical Engineering with minimum 15 years of relevant experience.</li><li>Strong experience in Electrical Maintenance within a Continuous Process Plant environment.</li><li>Experience with transformers, MCCs, PCCs, UPS systems, industrial motors, cranes, and lighting systems.</li><li>Strong preventive and breakdown maintenance experience.</li><li>Experience in plant shutdown activities.</li><li>Knowledge of SAP maintenance systems.</li><li>Previous team/shift leadership experience.</li><li>Strong troubleshooting and decision-making skills.</li><li>Good English communication skills.</li></ul>

<p>The Senior Panel Operator will be responsible for controlling and optimizing the DRI facility from the Central Control Room during commissioning, start-up, normal operation and shutdown. This is a critical control-room position requiring strong knowledge of DRI process behaviour, DCS operation, alarms, interlocks, process troubleshooting and emergency response. Key Responsibilities Operate and monitor the DRI plant through the PCS7 Distributed Control System (DCS). Participate in DCS/PLC loop checking, functional testing, interlock testing and Site Acceptance Testing. Monitor major process sections including the reactor/reduction shaft, PGH, process gas circuit, CO removal, HBI system and water-treatment facilities. Execute plant start-up, stabilization, normal-operation and shutdown sequences. Continuously monitor pressure, temperature, gas composition, flow, level and other critical process parameters. Maintain required DRI metallization, carbon content, production rate and product quality. Analyse trends and identify developing process abnormalities before they result in plant trips or production losses. Respond to alarms, trips and interlocks and take corrective action in accordance with approved operating procedures. Coordinate field actions with Senior Field Operators and Field Operators. Support emergency shutdown and plant recovery activities. Optimize consumption of natural gas, electricity, process gases, cooling water and other utilities. Maintain comprehensive control-room logs and shift reports. Support troubleshooting of recurring process and equipment problems. Coach Panel Operators and support their technical development. Work closely with Shift In-Charge, maintenance and instrumentation teams during breakdowns and plant interventions.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 4 years' relevant experience for degree holders or 8 years for diploma holders.</li><li>Minimum 4 years' experience as a Senior Panel Operator or equivalent control-room position.</li><li>Strong preference for candidates with Tenova HYL/Energiron DRI plant experience.</li><li>Strong knowledge of DRI plant start-up, shutdown and emergency operating procedures.</li><li>Hands-on experience with PCS7 or comparable modern DCS platforms.</li><li>Excellent understanding of process alarms, interlocks, trips, permissives and ESD philosophy.</li></ul>

<p>Lead mechanical maintenance activities during the assigned shift. Supervise maintenance teams and coordinate daily maintenance activities. Troubleshoot mechanical equipment failures and implement corrective actions. Execute preventive, predictive, and breakdown maintenance activities. Support plant shutdowns, start-ups, and commissioning activities. Maintain the reliability of critical DRI plant equipment. Coordinate spare parts and maintenance activities through SAP/CMMS. Ensure compliance with safety and maintenance procedures.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in mechanical engineering with 12 15 years of relevant experience; OR Diploma in Mechanical Engineering with 15 18 years of relevant experience.</li><li>Hands-on experience in Gas-Based DRI Plants is required.</li><li>Experience with MIDREX or HYL/ENERGIRON/HYL ZR technology is highly preferred.</li><li>Strong experience with DRI mechanical equipment such as reactors, compressors, water systems, PGH, and HBI machines.</li><li>Strong preventive, predictive, and breakdown maintenance experience.</li><li>Experience with plant shutdowns and cold/hot commissioning.</li><li>Knowledge of SAP/CMMS.</li><li>Strong troubleshooting, leadership, and decision-making skills.</li><li>Good English communication skills.</li></ul>

<p>Carry out preventive, corrective, and breakdown maintenance of plant equipment. Repair, overhaul, install, and dismantle mechanical equipment as required. Maintain pumps, compressors, cooling-water systems, conveyors, HBI machines, and hydraulic systems. Support plant shutdowns, turnarounds, and commissioning activities. Follow HSE, PTW, and LOTO procedures at all times.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Mechanical Engineering with 5 10 years of experience, or ITI/Fitter with 8 12 years. Experience in gas-based DRI plants is preferred. Good knowledge of mechanical equipment maintenance, alignment, pumps, compressors, and hydraulics. Ability to read mechanical drawings and troubleshoot equipment failures.</p>

<p>Participate in mechanical completion inspections, system walk-downs and punch-list identification/closure. Verify equipment and piping installation against approved P&amp;IDs and operating requirements. Support flushing, blowing, hydrotesting, gas leak testing, line checking and equipment functional testing. Participate in commissioning and start-up of gas circuits, process equipment, CO removal systems and associated utilities. Perform field line-ups and equipment preparation for plant start-up, shutdown and maintenance. Operate and inspect field equipment including valves, pumps, compressors, heaters, material-handling systems and associated auxiliaries. Monitor field conditions for abnormal temperature, pressure, vibration, leakage, noise or equipment behaviour. Coordinate field actions with the Panel Operator and Shift In-Charge. Guide and supervise Field Operators during routine and non-routine operational activities. Support equipment isolation and de-isolation under approved PTW and LOTO procedures. Respond effectively to gas leaks, trips, equipment failures and other operational emergencies. Maintain accurate field logs and report abnormalities promptly. Ensure safe handling of natural gas, reducing gases, hydrogen-rich gas and carbon monoxide environments. Contribute to improving operating procedures and field checklists based on commissioning and operating experience.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical/Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 5 years' experience for degree holders or 8 years for diploma holders.</li><li>Minimum 2 years as a Senior Field Operator or equivalent.</li><li>Hands-on experience in Tenova HYL/Energiron or Midrex DRI operations.</li><li>Experience in commissioning/start-up of a DRI plant will be a strong advantage.</li><li>Good knowledge of process gas systems, CO removal, PGH, natural-gas systems and plant utilities.</li><li>Strong understanding of PTW, LOTO and gas-safety practices.</li></ul>

<p>Lead instrumentation maintenance activities during the assigned shift. Supervise instrumentation technicians and contractors. Troubleshoot instrumentation and control system issues. Support installation, commissioning, start-up, and shutdown activities. Review P&amp;IDs, loop diagrams, wiring diagrams, datasheets, and other technical documentation. Monitor DCS, PLC, ESD, F&amp;G, and SCADA systems. Coordinate calibration and preventive/corrective maintenance activities. Ensure compliance with plant HSE procedures and maintenance standards.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s Degree in Instrumentation/Electronics Engineering with 5 8 years of relevant experience; OR Diploma in Instrumentation Engineering with 8 12 years of relevant experience.</li><li>Minimum 5 years of experience with MIDREX or HYL/ENERGIRON technology.</li><li>Strong knowledge of DCS, PLC, instrumentation calibration, and troubleshooting.</li><li>Experience with ESD, F&amp;G, and SCADA systems.</li><li>Previous commissioning, start-up, shutdown, and maintenance exposure.</li><li>Previous team/shift leadership experience is preferred.</li><li>SAP exposure is an advantage.</li><li>Good English communication skills.</li></ul>

<p>Manage instrumentation and control activities across the DRI Plant. Support installation, testing, commissioning, start-up, and maintenance activities. Review P&amp;IDs, instrumentation datasheets, control system architecture, and technical drawings. Support FAT, SAT, testing, and performance verification activities. Monitor and troubleshoot DCS, PLC, SIS/ESD, and SCADA systems. Coordinate with technology licensors, vendors, EPC contractors, and internal teams. Support preventive and corrective maintenance activities. Lead and support instrumentation engineers, supervisors, and technicians. Ensure compliance with applicable HSE and technical standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s Degree in Instrumentation, Electronics, Electrical &amp; Instrumentation Engineering, or a related discipline with 10 15 years of relevant experience; OR Diploma in Instrumentation Engineering with 12 18 years of relevant experience. Minimum 8 years of experience with MIDREX or HYL/ENERGIRON technology. Strong knowledge of DCS and PLC systems. Experience with SIS/ESD, SCADA, and industrial control systems. Exposure to Siemens PCS 7 is highly preferred. Knowledge of SAP PM/MM, HART, Modbus, HAZOP, and SIL is an advantage. Strong commissioning, start-up, maintenance, and troubleshooting experience. Good English communication skills.</p>

<p>Minimum 5 years of relevant marketing experience, with strong exposure to Digital Marketing.</p><p>Strong knowledge of digital marketing channels, tools, analytics, CRM, marketing automation, and performance measurement.</p><p>Proven experience in managing teams, marketing campaigns, budgets, and external partners.</p><p>Fluent English communication and presentation skills are required.</p><p>Arabic language skills are considered an advantage.</p><p>Strong leadership, communication, analytical, and strategic thinking skills.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Marketing, Business Administration, or a related field.</p><p>At least 2 years of team management or leadership experience.</p><p>Candidates do not necessarily need to currently hold a Marketing Manager title; Team Leads or candidates in similar leadership positions can be considered based on their responsibilities and overall experience.</p><p>Strong preference for candidates coming from Marketing Agencies, particularly those with extensive Digital Marketing exposure.</p>