وظائف مهندس PLC في سلطنة عمان

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Engineer is responsible for executing, coordinating, and supporting all pre-commissioning and commissioning activities related to the telecommunications systems of a large-scale oil & gas / LNG facility. The role ensures that telecom systems are installed, tested, commissioned, and handed over safely and in compliance with project specifications, international standards, and applicable codes.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Review and understand telecom engineering documents, including specifications, drawings, data sheets, method statements, commissioning procedures, and vendor documentation.</li> <li>Participate in system walkdowns, punch listing, and verification of installation completeness for telecom systems.</li> <li>Verify correctness of installation for telecom equipment, cabling, fiber optic systems, racks, cabinets, and interfaces.</li> <li>Support preparation and updating of pre-commissioning and commissioning test packs.</li> <li>Ensure all telecom systems are mechanically complete and ready for commissioning activities.</li> <li>Coordinate with construction, quality, and engineering teams to resolve technical queries and punch items.</li> </ul> <p><strong>Commissioning & start-up</strong></p> <ul> <li>Execute and supervise commissioning activities for telecom systems, including functional testing, integration testing, and system validation.</li> <li>Perform system tests such as loop checks, signal verification, end-to-end testing, and redundancy checks.</li> <li>Interface with vendors, subcontractors, and other discipline engineers during commissioning activities.</li> <li>Support energization, SAT (Site Acceptance Tests), and system integration with ICSS, safety, and IT networks.</li> <li>Identify, troubleshoot, and resolve telecom-related issues during commissioning and start-up.</li> <li>Assist in preparing systems for Ready for Start-Up (RFSU) and operational handover.</li> </ul> <h4>Telecom systems scope (typical)</h4> <ul> <li>Telecom network infrastructure (fiber optic & copper)</li> <li>Telephone systems (PABX / IP telephony)</li> <li>Public address & general alarm (PAGA) systems</li> <li>CCTV & security surveillance systems</li> <li>Access control & intrusion detection systems</li> <li>Radio communication systems (TETRA / UHF / VHF)</li> <li>Data networks & telecom cabinets</li> <li>Interfaces with control and safety systems</li> </ul> <h4>Safety, quality & documentation</h4> <ul> <li>Strictly comply with HSE policies, procedures, and site safety requirements at all times.</li> <li>Participate in toolbox talks, job safety analyses (JSA), and risk assessments.</li> <li>Ensure commissioning activities are performed in accordance with approved procedures and quality standards.</li> <li>Support compilation of as-built documentation, test records, and commissioning dossiers.</li> <li>Contribute to lessons learned and commissioning close-out reports.</li> </ul> <h4>Interface & coordination</h4> <ul> <li>Work closely with commissioning management, discipline leads, construction teams, and vendors.</li> <li>Coordinate with operations and maintenance representatives during system handover.</li> <li>Support planning and sequencing of telecom commissioning activities in line with overall project milestones.</li> </ul> <h4>Qualification requirements</h4> <ul> <li>Bachelor’s degree in telecommunications engineering, electrical engineering, or related discipline.</li> <li>Minimum 5–8 years of experience in telecom engineering, with significant exposure to pre-commissioning and commissioning activities.</li> <li>Proven experience on LNG, gas processing, or large-scale oil & gas projects.</li> <li>Strong understanding of international standards (IEC, ITU, IEEE) relevant to telecom systems.</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Engineer is responsible for executing, coordinating, and supporting all pre-commissioning and commissioning activities related to the telecommunications systems of a large-scale oil & gas / LNG facility. The role ensures that telecom systems are installed, tested, commissioned, and handed over safely and in compliance with project specifications, international standards, and applicable codes.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Review and understand telecom engineering documents, including specifications, drawings, data sheets, method statements, commissioning procedures, and vendor documentation.</li> <li>Participate in system walkdowns, punch listing, and verification of installation completeness for telecom systems.</li> <li>Verify correctness of installation for telecom equipment, cabling, fiber optic systems, racks, cabinets, and interfaces.</li> <li>Support preparation and updating of pre-commissioning and commissioning test packs.</li> <li>Ensure all telecom systems are mechanically complete and ready for commissioning activities.</li> <li>Coordinate with construction, quality, and engineering teams to resolve technical queries and punch items.</li> </ul> <p><strong>Commissioning & start-up</strong></p> <ul> <li>Execute and supervise commissioning activities for telecom systems, including functional testing, integration testing, and system validation.</li> <li>Perform system tests such as loop checks, signal verification, end-to-end testing, and redundancy checks.</li> <li>Interface with vendors, subcontractors, and other discipline engineers during commissioning activities.</li> <li>Support energization, SAT (Site Acceptance Tests), and system integration with ICSS, safety, and IT networks.</li> <li>Identify, troubleshoot, and resolve telecom-related issues during commissioning and start-up.</li> <li>Assist in preparing systems for Ready for Start-Up (RFSU) and operational handover.</li> </ul> <h4>Telecom systems scope (typical)</h4> <ul> <li>Telecom network infrastructure (fiber optic & copper)</li> <li>Telephone systems (PABX / IP telephony)</li> <li>Public address & general alarm (PAGA) systems</li> <li>CCTV & security surveillance systems</li> <li>Access control & intrusion detection systems</li> <li>Radio communication systems (TETRA / UHF / VHF)</li> <li>Data networks & telecom cabinets</li> <li>Interfaces with control and safety systems</li> </ul> <h4>Safety, quality & documentation</h4> <ul> <li>Strictly comply with HSE policies, procedures, and site safety requirements at all times.</li> <li>Participate in toolbox talks, job safety analyses (JSA), and risk assessments.</li> <li>Ensure commissioning activities are performed in accordance with approved procedures and quality standards.</li> <li>Support compilation of as-built documentation, test records, and commissioning dossiers.</li> <li>Contribute to lessons learned and commissioning close-out reports.</li> </ul> <h4>Interface & coordination</h4> <ul> <li>Work closely with commissioning management, discipline leads, construction teams, and vendors.</li> <li>Coordinate with operations and maintenance representatives during system handover.</li> <li>Support planning and sequencing of telecom commissioning activities in line with overall project milestones.</li> </ul> <h4>Qualification requirements</h4> <ul> <li>Bachelor’s degree in telecommunications engineering, electrical engineering, or related discipline.</li> <li>Minimum 5–8 years of experience in telecom engineering, with significant exposure to pre-commissioning and commissioning activities.</li> <li>Proven experience on LNG, gas processing, or large-scale oil & gas projects.</li> <li>Strong understanding of international standards (IEC, ITU, IEEE) relevant to telecom systems.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Key Responsibilities Review and validate SCADA design documents, control philosophy, and I/O lists against contract specification and client requirements Supervise installation of RTUs, PLCs, HMI panels, and instrumentation across all project sites Configure and commission SCADA software, communication networks (radio, fibre, GSM/GPRS), and historian systems Coordinate with civil, mechanical, and electrical teams to sequence SCADA works against the overall construction programme Manage subcontractors and vendors supplying SCADA hardware and integration services Conduct FAT and SAT for control panels and integrated systems Prepare and execute loop testing, functional testing, and pre-commissioning checklists Interface with the Supervising Engineer on inspection and approval of SCADA works Maintain as-built drawings, control narratives, and O&amp;M documentation for handover Support RFI resolution on SCADA and instrumentation queries Train client operations staff on system use ahead of taking over</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Work share project execution experience.</li><li>Knowledge of national/international electrical codes and standards.</li><li>Rich knowledge and experience in specifications, selection, design and engineering of DCS/ESD/PLC/SCADA systems, including FF technology.</li><li>Hands-on experience in developing &amp; modification of plc logics and SCADA screens as per the requirements</li><li>Good knowledge of HAZOP/SIL study, including SIL calculation</li><li>Hands-on experience of FAT (Factory Acceptance Test) of various systems like DCS/ESD/SCADA/PLC, etc.</li><li>Sizing of Various instrument items like flow element, control valve, safety relief valve, wake frequency of thermo-well, etc.</li><li>FF Segment Calculation and design</li><li>Hands-on experience in handling instrumentation of critical packages like compressors, blowers, fire heaters, turbines, etc.</li><li>Detailed engineering to develop various instrumentation layouts and MT</li><li>Detailed engineering to develop various instrumentation documents like Logic Diagram, Control Narrative, Instrumented Protection Function Narratives, wiring connection details and loop diagrams</li><li>Manpower Planning, Scheduling, Cost Control skills</li><li>Ability to interact with other design groups in the office.</li><li>Excellent oral and written communication skills in English.</li><li>Compliance with budget, schedule and quality within allocated resources.</li><li>Vast work experience in Instrumentation Engineering and Design for Oil and Gas Industries, Petroleum and Refinery Units, chemical/Petrochemical/ Fertilizer plants, etc.</li><li>Good Experience in handling projects like developing Front End Engineering &amp; Design (FEED) Packages, executing Detailed Engineering services on an EPCM basis and PMC services</li><li>Experience as Team Leader</li></ul><p></p></section>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job title : <b>Vertical Solution Sales Engineer (VSE) – Financial/Government Industry</b></p><p>Company : Huawei</p><p>Location : Muscat, Oman</p><p>Employment Type : Full-time</p><p> </p><p><b>Job Description:</b></p><p> </p><p>We are looking for a Vertical Solution Sales Engineer (VSE) to join Huawei Oman, focusing on the Financial and/or Government sectors. You will be responsible for designing and delivering end-to-end ICT solutions, supporting the sales team in technical engagements and project delivery.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Key Responsibilities:</b></p><p><br></p><ul><li>Understand customer business scenarios in Financial/Government sectors; design customized solutions leveraging Huawei and Western OEM products</li><li>Collaborate with Account Managers for customer requirement analysis, solution presentations, POC demonstrations, and bid support</li><li>Coordinate technical resources internally and externally to ensure solution delivery and project success</li><li>Track industry trends and policy updates; develop solution white papers and benchmark case studies</li><li>Support team capability building and enhance solution selling skills across the sales team</li></ul><p> </p><p><b>Qualifications:</b></p><p><br></p><ul><li>10+ years of experience in ICT solution sales or technical pre-sales; Oman-based candidates preferred</li><li>Strong understanding of local market and business practices</li><li>Experience working with channels and vendors (Vendor) in technical roles</li><li>Previous experience with Western OEM brands (e.g., Cisco, VMware, Oracle, Microsoft, HPE, etc.) in pre-sales or solution architecture</li><li>Proven track record in solution selling within Financial/Government sectors</li><li>Technical team management experience; previous Tech Lead role is a plus</li><li>Excellent presentation and communication skills; fluent in English (Arabic is a plus)</li><li>Familiar with Omani business culture; able to independently manage large-scale technical projects</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job title : <b>Vertical Solution Sales Engineer (VSE) – Financial/Oil &amp; Gas/Government Industry</b></p><p>Company : Huawei</p><p>Location : Muscat, Oman</p><p>Employment Type : Full-time</p><p><br></p><p><b>Job Description:</b></p><p><br></p><p>We are looking for a Vertical Solution Sales Engineer (VSE) to join Huawei Oman, focusing on the Financial/Oil &amp; Gas/Government sectors. You will be responsible for designing and delivering end-to-end ICT solutions, supporting the sales team in technical engagements and project delivery.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Key Responsibilities:</b></p><p><br></p><ul><li>Understand customer business scenarios in Financial/Government sectors; design customized solutions leveraging Huawei and Western OEM products</li><li>Collaborate with Account Managers for customer requirement analysis, solution presentations, POC demonstrations, and bid support</li><li>Coordinate technical resources internally and externally to ensure solution delivery and project success</li><li>Track industry trends and policy updates; develop solution white papers and benchmark case studies</li><li>Support team capability building and enhance solution selling skills across the sales team</li></ul><p><br></p><p><b>Qualifications:</b></p><p><br></p><ul><li>10+ years of experience in ICT solution sales or technical pre-sales; Oman-based candidates preferred</li><li>Strong understanding of local market and business practices</li><li>Experience working with channels and vendors (Vendor) in technical roles</li><li>Previous experience with Western OEM brands (e.g., Cisco, VMware, Oracle, Microsoft, HPE, etc.) in pre-sales or solution architecture</li><li>Proven track record in solution selling within Financial/Oil &amp; Gas/Government industry </li><li>Technical team management experience; previous Tech Lead role is a plus</li><li>Excellent presentation and communication skills; fluent in English (Arabic is a plus)</li><li>Familiar with Omani business culture; able to independently manage large-scale technical projects</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector. Job Title: Automation Engineer Reports To: Engineering Manager / Automation Supervisor Job Details Number of Vacancies: 4 Positions Salary Range: OMR PHONE_NUMBER per month Work Location: All regions of Oman except Dhofar (Preference will be given to applicants from the local governorate) ________________________________________ Department: Engineering / Operations ________________________________________ Job Purpose The Automation Engineer is responsible for designing, implementing, maintaining, and optimizing automation and control systems to ensure efficient, reliable, and safe operation of industrial processes and equipment. ________________________________________ Key Responsibilities Design, develop, and implement automation and control solutions for operational facilities. Configure, program, and troubleshoot PLC, SCADA, HMI, and DCS systems. Monitor system performance and identify opportunities for process improvement and optimization. Conduct preventive and corrective maintenance of automation equipment and control systems. Support commissioning, testing, and startup activities for new projects and system upgrades. Analyze system faults and implement corrective actions to minimize downtime. Prepare technical documentation, reports, drawings, and operating procedures. Ensure compliance with company standards, safety regulations, and industry best practices. Coordinate with operations, maintenance, and project teams to support business objectives. Provide technical support and training to operations and maintenance personnel. ________________________________________ Qualifications Bachelor s Degree in Automation Engineering, Electrical Engineering, Electronics Engineering, Instrumentation Engineering, or a related field. ________________________________________ Experience Practical Experience: 0 (No prior work experience required) Internship or academic project experience in automation or control systems is an advantage. ________________________________________ Technical Skills Basic knowledge of PLC programming (Siemens, Allen-Bradley, Schneider, ABB). Understanding of SCADA and HMI systems. Basic knowledge of instrumentation, control systems, and industrial automation technologies. Familiarity with industrial communication protocols such as Modbus, Profibus, Profinet, and Ethernet/IP is an advantage. Ability to read and interpret electrical and control system drawings. ________________________________________ Soft Skills Strong analytical and problem-solving skills. Good communication and teamwork abilities. Willingness to learn and develop technical skills. Ability to work under pressure and manage multiple tasks. Good organizational and documentation skills. ________________________________________ Working Conditions Office and field-based work environments. Site visits, troubleshooting activities, and support during shutdowns or emergencies may be required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualifications Bachelor s Degree in Automation Engineering, Electrical Engineering, Electronics Engineering, Instrumentation Engineering, or a related field.</p><p>Experience Practical Experience: 0 (No prior work experience required) Internship or academic project experience in automation or control systems is an advantage.</p><p>Technical Skills Basic knowledge of PLC programming (Siemens, Allen-Bradley, Schneider, ABB). Understanding of SCADA and HMI systems. Basic knowledge of instrumentation, control systems, and industrial automation technologies. Familiarity with industrial communication protocols such as Modbus, Profibus, Profinet, and Ethernet/IP is an advantage. Ability to read and interpret electrical and control system drawings.</p><p>Soft Skills Strong analytical and problem-solving skills. Good communication and teamwork abilities. Willingness to learn and develop technical skills. Ability to work under pressure and manage multiple tasks. Good organizational and documentation skills.</p><p>Working Conditions Office and field-based work environments. Site visits, troubleshooting activities, and support during shutdowns or emergencies may be required.</p><p>Application Note : The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>MEP MAINTENANCE ENGINEER</p><p>Coordinate technicians and contractors for planned and reactive maintenance Supervisor.</p><p>Understanding of SLAs, KPIs, and asset lifecycle management</p><p>Review and ensure implementation of preventive maintenance schedules.</p><p>Monitor system performance using BMS and CMMS platforms.</p><p>Serve as the primary technical liaison between the facilities management team and the clients representatives Attend regular meetings with the client to discuss maintenance activities, ongoing issues, and upcoming projects.</p><p>Provide timely and clear updates, technical reports, and recommendations to the client.</p><p>Ensure client satisfaction by promptly addressing concerns and coordinating effective solutions.</p><p>Conduct site inspections, issue technical reports, CAPA , HSE Reports and ensure safety compliance and well versed with FM Industry standards</p><p>INSTRUMENTATION ENGINEER esign, install, test, and commission instrumentation and control systems for industrial projects.</p><p>Develop and review instrumentation drawings, P&amp;IDs, loop diagrams, hook-up drawings, and cable schedules.</p><p>Select and specify field instruments such as pressure, temperature, flow, and level transmitters.</p><p>Install, calibrate, troubleshoot, and maintain instrumentation equipment.</p><p>Configure and maintain PLC, DCS, SCADA, and control systems.</p><p>Perform preventive, corrective, and predictive maintenance of instrumentation systems.</p><p>Conduct loop checking, functional testing, FAT, SAT, and commissioning activities.</p><p>Diagnose and resolve instrumentation and control system faults to minimize downtime.</p><p>Ensure all instrumentation complies with project specifications, industry standards, and safety regulations.</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Data Engineer IA orienté-e métier – Support et Service F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Rejoindre Safran Aircraft Engines, c'est contribuer à façonner l'avenir de l'aviation, avec une motorisation plus verte, plus économe et plus durable.<br>Au sein de la direction des Opérations Clients, nous pilotons la relation Support et Service avec l'ensemble de nos clients, telle que la facturation, les garanties, les contrats, le leasing, etc.. La donnée est au cœur de la performance et de la transformation digitale !<br>Nous avons identifié des leviers de croissance majeurs liés à l'exploitation de nos données. Pour transformer ces opportunités en outils de production/process fiables et rentables, nous créons ce poste d'Ingénieur IA orienté métier. Vous serez le pont indispensable entre la complexité algorithmique et les besoins pragmatiques de nos utilisateurs finaux en étant un véritable architecte de solutions concrètes !<br>Votre rôle sera de concevoir, déployer et maintenir des solutions d'IA qui répondent à des problématiques business réelles. Vous serez un véritable acteur de la maturité data de Safran Aircraft Engines et un partenaire privilégié des équipes de l'ensemble de nos services qui pilotent le Support et Service, chacun avec des business models et pratiques propres. <br>Vos missions : Transformer la donnée en valeur d'usage<br>• Analyse du besoin métier : Collaborer avec les directions opérationnelles pour traduire leurs enjeux en spécifications techniques<br>• Conception et Développement : Sélectionner les architectures adaptées (s'appuyer sur une IA interne Secured ChatGPT, Copilot / Copilot Premium – LLM, ML classique ou Deep Learning selon les cas) et développer les modèles en privilégiant la robustesse et l'explicabilité<br>• Industrialisation : Assurer le passage du prototype (PoC) à la mise en production, en veillant à la scalabilité et au monitoring des performances<br>• Vulgarisation et Accompagnement : Présenter les résultats aux parties prenantes non-techniques et accompagner le changement pour garantir l'adoption des outils créés<br>• Veille technologique : Identifier les nouvelles tendances IA applicables directement à notre secteur d'activité pour maintenir notre avantage compétitif<br>• Suivre les KPI et proposer des plans d'amélioration continue, en particulier sur le suivi des montées de version des IA</p><br><br><p>Pourquoi nous rejoindre ?<br>• Vous contribuerez directement à la transformation digitale et commerciale d'un grand acteur de l'aéronautique<br>• Vous serez au cœur d'un projet stratégique : utiliser de la donnée fiable, utile et créatrice de valeur<br>• Vous travaillerez dans un environnement collaboratif, où la curiosité et la créativité sont encouragées<br>• Vous développerez une double compétence IA/data et business Support et Service, précieuse pour la suite de votre carrière</p><br><br><p>Formation :<br>• Bac +5 (école d'ingénieur, école de commerce ou université) avec spécialisation en IA ou domaine connexe<br>• 3 ans d'expérience minimum sur un poste équivalent, idéalement acquise dans un environnement où l'IA est intégrée à un produit ou un service final<br>Compétences techniques<br>- Maîtrise de la Stack Data : Python (Expert), SQL, et les bibliothèques standards (Pandas, Scikit-learn ou PyTorch (TensorFlow apprécié)<br>- LLMs : Expérience dans l'implémentation de solutions type RAG, fine-tuning ou utilisation d'APIs — maîtrise de LangChain ou LlamaIndex<br>- Prompt engineering et évaluation de sorties LLM<br>- MLOps &amp; Cloud : MLflow ou équivalent, Docker (Kubernetes apprécié), et AWS (SageMaker apprécié)<br>- Aisance dans la manipulation de données multi-sources (CRM, ERP, fichiers plats, etc.)<br>Environnement &amp; outils disponibles<br>Vous évoluerez dans un environnement où la transformation digitale est déjà engagée : ChatGPT Secured déployé en interne, Microsoft Copilot / Copilot Premium intégré aux outils collaboratifs, et une infrastructure Cloud AWS en place.<br>Compétences comportementales : Equilibre entre rigueur technique et vision métier<br>• Sens du "Produit" : Vous ne développez pas pour la beauté de l'algorithme, mais pour résoudre un problème / améliorer un process<br>• Excellente Communication : Capacité à expliquer des concepts complexes de manière simple à des décideurs et des utilisateurs finaux<br>• Autonomie et Esprit Critique : Savoir dire "non" à une solution IA si une règle métier simple est plus efficace.<br>• Esprit d'équipe et d'entraide<br>• Esprit analytique, rigueur et sens du détail<br>• Pédagogie et envie de faire grandir la culture data autour de soi<br>• Curiosité, esprit d'innovation et goût du challenge<br>• Force de proposition dans l'amélioration continue<br>• Langues : Français et anglais professionnel</p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for the maintenance of field instruments related large water distribution and transmission Network Systems</p><p>Operate and monitor the SCADA system for the water supply network, including pumping stations, reservoirs, tanker filling stations, and borewells to ensure smooth and reliable operation. Monitor real-time parameters such as flow, pressure, level, pump status, and valve status, water quality parameters. Identify alarms, faults, and abnormal conditions and take corrective actions. Ensure continuous communication between SCADA, RTU/PLC, and field devices. SCADA system configuration, diagnostics, and troubleshooting.</p><p>Check the cost as per budget.</p><p>Minimum 4-Years working experience for the Operation and Maintenance of Various types of field instruments. Responsible for Instrument data sheets, drawings, P&amp; Ids, I/O wiring diagrams, charts, specifications, graphs, charts, etc. Supervise and directs all maintenance personnel in accordance with established policies and procedures. Maintain and troubleshoot field instruments including: o Flowmeters (electromagnetic / ultrasonic) o Pressure transmitters o Level transmitters o Control valves and actuators o Water Quality Analyzer (PH,Conductivity, chlorine and turbidity) Perform calibration checks and ensure instrument accuracy. Replace or repair faulty instruments as required. Support PLC/RTU configuration, Programming, diagnostics, and troubleshooting. Maintain Modbus RTU/TCP communication between instruments, RTUs, and SCADA. Assist in modification of logic and communication settings when required. Attend all the work orders given by Client regarding identification &amp; troubleshooting of issues related to SCADA &amp; PLC. Review the implementation of measuring devices or new control systems. Ensure each part is installed properly and conduct test runs before initiating actual operations. Perform scheduled preventive maintenance of SCADA and instrumentation systems. Attend breakdowns and restore system functionality in minimum downtime. Maintain maintenance logs, reports, and service records.</p><p>Keep Project Manager informed of all unusual conditions or maintenance problems. Assure that the entire plant and all equipments are in proper operating condition with proper data Management &amp; SCADA control Cooperates with site team to keep records of maintenance and service records of equipments. Supervise and directs all maintenance personnel in accordance with established policies and procedures.</p><p>Prepare and recommend specifications for equipment and material purchases. Report to Maintenance Manager Advise on Technical Support aspects Be fully aware of Contract requirements Observe procedures as required by the Contract Coordinate and monitor the preparation and submission of Drawings. Co ordinate with the external agencies like Omantel And PAEW for getting permissions and approvals Prepare Method Statements, Liaise with the Client Engineer. Attend relevant meetings with Project Manager. Ensure adequate protection of equipment at all times. Ensure Health &amp; Safety is adequately observed.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum 4-Years working experience for the Operation and Maintenance of Various types of field instruments.</p><p>Responsible for Instrument data sheets, drawings, P&amp; Ids, I/O wiring diagrams, charts, specifications, graphs, charts, etc.</p><p>Supervise and directs all maintenance personnel in accordance with established policies and procedures.</p><p>Maintain and troubleshoot field instruments including:</p><ul><li>Flowmeters (electromagnetic / ultrasonic)</li><li>Pressure transmitters</li><li>Level transmitters</li><li>Control valves and actuators</li><li>Water Quality Analyzer (PH,Conductivity, chlorine and turbidity)</li></ul><p>Perform calibration checks and ensure instrument accuracy.</p><p>Replace or repair faulty instruments as required.</p><p>Support PLC/RTU configuration, Programming, diagnostics, and troubleshooting.</p><p>Maintain Modbus RTU/TCP communication between instruments, RTUs, and SCADA.</p><p>Assist in modification of logic and communication settings when required.</p><p>Attend all the work orders given by Client regarding identification &amp; troubleshooting of issues related to SCADA &amp; PLC.</p><p>Review the implementation of measuring devices or new control systems.</p><p>Ensure each part is installed properly and conduct test runs before initiating actual operations.</p><p>Perform scheduled preventive maintenance of SCADA and instrumentation systems.</p><p>Attend breakdowns and restore system functionality in minimum downtime.</p><p>Maintain maintenance logs, reports, and service records.</p><p>Keep Project Manager informed of all unusual conditions or maintenance problems.</p><p>Assure that the entire plant and all equipments are in proper operating condition with proper data Management &amp; SCADA control</p><p>Cooperates with site team to keep records of maintenance and service records of equipments.</p><p>Supervise and directs all maintenance personnel in accordance with established policies and procedures.</p><p>Prepare and recommend specifications for equipment and material purchases.</p><p>Report to Maintenance Manager</p><p>Advise on Technical Support aspects</p><p>Be fully aware of Contract requirements</p><p>Observe procedures as required by the Contract</p><p>Coordinate and monitor the preparation and submission of Drawings.</p><p>Co ordinate with the external agencies like Omantel And PAEW for getting permissions and approvals</p><p>Prepare Method Statements, Liaise with the Client Engineer.</p><p>Attend relevant meetings with Project Manager.</p><p>Ensure adequate protection of equipment at all times.</p><p>Ensure Health &amp; Safety is adequately observed.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>CNS&nbsp;is a technology company that powers the future by providing digital solutions essential to support all enterprise and human development. While growing and managing a robust pool of supplier-partners for the benefit of our clients has always been a priority, we are constantly re-inventing ourselves.<br> Founded in 1987 with more than 30 years of experience, CNS employs over 320 employees including more than 250 certified engineers. We offer in-depth expertise and a range of best-in-class products that support the digital transformation of all major industries. With offices in three countries, we have an extensive reach into, and regional knowledge of the Middle East markets.<br> A shift into levering our many years of experience to develop pioneering software in-house will add yet another dimension to our highly innovative solutions-portfolio.</p><br><br>Job Description<br><p>The Professional Services Engineer will be responsible for close collaboration with clients, vendors, and internal teams to implement, support, and optimize banking technology solutions across multiple platforms. The ideal candidate will be proactive, detail-oriented, and able to handle complex technical challenges while delivering high-quality customer service.</p><br><p><strong>DUTIES &amp; RESPONSIBILITIES</strong></p><br><ul><li>Install, configure, customize, and troubleshoot banking applications, including:<ul><li>VCP LITE NDC-DDC</li><li>VCP KIOSK NDC-DDC</li><li>Probase, Procashin, Prochequein, Protopas WEBEXT, Prorkl</li><li>Vynamic View and Vynamic Security</li></ul></li><li>Support Proof of Concept (POC) for new products, User Acceptance Testing (UAT), and EMV ADVT/MTIP certifications.</li><li>Plan, schedule, monitor, and manage projects to ensure successful business solution implementation.</li><li>Conduct root-cause analysis on escalated issues and provide permanent resolutions.</li><li>Research and contribute to technical proposals and solution documentation.</li><li>Maintain and administer tools required for deployment and support of solutions.</li><li>Respond to customer inquiries through multiple channels and resolve issues within SLA timelines.</li><li>Collaborate with vendor support teams for software updates, patches, and issue resolution.</li><li>Provide guidance and mentorship to junior engineers during project execution and troubleshooting.</li></ul><br>Qualifications<br><ul><li>Bachelor’s degree in computer science, Computer Engineering, or Information Technology.</li><li><p>3–4 years of experience in the banking or BFSI technology domain.</p><br></li><li><p>4–5 years of experience in the banking or BFSI technology domain is preferable.</p><br></li></ul><br>Additional Information<br><p><strong><u>Core Technical Skills</u></strong></p><br><ul><li>VCP LITE / KIOSK NDC-DDC, Probase, Procashin, Prochequein, Protopas WEBEXT, Prorkl</li><li>Vynamic View, Vynamic Security</li></ul><p><strong><u>Professional Services Engineering Practices</u></strong></p><br><ul><li>Strong understanding of banking applications, ATMs, and self-service terminals.</li><li>Experience with software deployment, configuration, and maintenance.</li><li>Familiarity with regulatory standards and compliance in banking technology (EMV, MTIP, ADVT).</li><li>Excellent teamwork and interpersonal skills.</li></ul><p><strong><u>Soft Skills</u></strong></p><br><ul><li>Strong troubleshooting, analytical, and problem-solving abilities.</li><li>Effective verbal, written, and listening communication skills in English.</li><li>Ability to quickly learn and adapt to new technologies.</li><li>Proactive, organized, and able to manage multiple priorities in a fast-paced environment.</li></ul><p><em>Compliance with policies and procedures based on the ISO standards adopted by CNS.</em></p><br><br><br> </div>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>DUTIES &amp; RESPONSIBILITIES</strong></p> <ul> <li>Install, configure, customize, and troubleshoot banking applications, including:<ul> <li>VCP LITE NDC-DDC</li> <li>VCP KIOSK NDC-DDC</li> <li>Probase, Procashin, Prochequein, Protopas WEBEXT, Prorkl</li> <li>Vynamic View and Vynamic Security</li> </ul> </li> <li>Support Proof of Concept (POC) for new products, User Acceptance Testing (UAT), and EMV ADVT/MTIP certifications.</li> <li>Plan, schedule, monitor, and manage projects to ensure successful business solution implementation.</li> <li>Conduct root-cause analysis on escalated issues and provide permanent resolutions.</li> <li>Research and contribute to technical proposals and solution documentation.</li> <li>Maintain and administer tools required for deployment and support of solutions.</li> <li>Respond to customer inquiries through multiple channels and resolve issues within SLA timelines.</li> <li>Collaborate with vendor support teams for software updates, patches, and issue resolution.</li> <li>Provide guidance and mentorship to junior engineers during project execution and troubleshooting.</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>The Professional Services Engineer will be responsible for close collaboration with clients, vendors, and internal teams to implement, support, and optimize banking technology solutions across multiple platforms. The ideal candidate will be proactive, detail-oriented, and able to handle complex technical challenges while delivering high-quality customer service.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 10,300 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br><p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p><span>The Senior Site Engineer – Systems is responsible for supervising and coordinating all aspects of systems installation, integration, testing, and site activities for large infrastructure projects under Project Management Consultancy (PMC) contracts, particularly in the rail and public transport sectors. The role ensures systems are delivered according to design specifications, quality standards, safety requirements, and project timelines</span></p><br><br> Missions/Main Duties <br><ul><li><span>Supervise and monitor the on-site installation and integration of various systems (signaling, telecommunications, electrical, SCADA, AFC, CCTV, etc.).</span></li><li><span>Review and interpret design drawings, technical specifications, and method statements, ensuring correct implementation and compliance.</span></li><li><span>Conduct regular site inspections and audits to verify quality, progress, and adherence to safety standards.</span></li><li><span>Identify and resolve technical challenges, interfacing issues, and site constraints during installation and testing phases.</span></li><li><span>Coordinate closely with contractors, suppliers, design engineers, and client representatives for effective execution and resolution of issues.</span></li><li><span>Support and monitor the systems testing and commissioning activities, ensuring system performance meets project requirements.</span></li><li><span>Manage site documentation, including inspection records, daily reports, non-conformance reports, and as-built drawings.</span></li><li><span>Lead and manage system interfaces across multiple disciplines, ensuring alignment between civil, track, rolling stock, and MEP teams to avoid clashes and integration delays.</span></li><li><span>Oversee contractor’s compliance with project schedules, proactively identifying risks to key milestones and implementing mitigation measures to maintain overall program delivery.</span></li><li><span>Ensure adequate implementation of permit-to-work, HSE procedures, and safety protocols.</span></li><li><span>Participate in technical meetings, interface workshops, and project progress reviews.</span></li></ul> Profile/Skills <br><ul><li>Bachelor’s Degree in Electrical Engineering, Mechanical Engineering, or a related field.</li><li><span>Minimum 10 years’ site experience in systems engineering roles within major infrastructure/PMC projects (rail/metro preferred).</span></li><li><span>Strong knowledge of systems installation, integration, and testing processes.</span></li><li><span>Solid understanding of international codes, standards, and best practices applicable to rail and transportation systems.</span></li><li><span>Proven ability to coordinate multidisciplinary site teams and resolve technical issues efficiently.</span></li></ul> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>For Wind &amp; Solar PV projects Experience Required Experience in civil/structural engineering for renewable energy, infrastructure, or large-scale construction projects. Hands-on knowledge of wind turbine foundations, solar PV mounting systems, drainage, access roads, and cable trenching works. Proficiency in structural design and analysis software such as STAAD, SAP2000, AutoCAD Civil 3D, or similar tools. Experience reviewing technical drawings, structural calculations, geotechnical reports, and contractor submittals. Strong understanding of foundation design, geotechnical engineering, earthworks, and construction quality standards. Ability to coordinate with multidisciplinary teams and manage technical documentation, inspections, and site execution activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Civil engineer<br><br>If you have this experience pls contact +968 96596797</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong>Site Supervisor Reservoir Construction</strong> </p> <p> <strong>Job Summary:</strong> </p> <p>The Site Supervisor with expertise in reservoir construction, pump rooms, and associated compound works, including waterproofing and structural activities. Skilled in interpreting drawings, setting out, bar bending schedules (BBS), and advanced shuttering systems (H20 beams and steel walings). Strong in manpower planning, material management, and executing works as per project schedules. Proven ability to ensure quality, safety, and timely project delivery in accordance with approved drawings and specifications.</p> <p> <strong>Key Responsibilities:</strong> </p> <ul> <li>Supervise all site activities related to reservoir construction including excavation, PCC, RCC works, waterproofing, and backfilling.</li> <li>Ensure work is executed as per approved drawings, method statements, and project specifications.</li> <li>Monitor daily progress and report to the Project Engineer/Manager.</li> <li>Coordinate with subcontractors, operators, and labor teams for smooth workflow.</li> <li>Ensure proper utilization of manpower, materials, and equipment.</li> <li>Maintain site safety standards and ensure compliance with HSE regulations.</li> <li>Conduct toolbox talks and safety briefings for workers.</li> <li>Check quality of work including formwork, reinforcement, and concrete works.</li> <li>Ensure proper curing and finishing of concrete structures.</li> <li>Liaise with surveyors for level and alignment checks.</li> <li>Maintain daily site records, progress reports, and material consumption logs.</li> <li>Identify and resolve site issues and delays proactively.</li> <li>Ensure proper housekeeping and site organization.</li> </ul> <p> <strong>Required Qualifications:</strong> </p> <ul> <li>Diploma in Civil Engineering</li> <li>Minimum 3 7 years of experience in reservoir, water tank, or infrastructure construction projects.</li> </ul> <p> <strong>Skills:</strong> </p> <ul> <li>Strong knowledge of RCC works, waterproofing, and structural construction.</li> <li>Ability to read and interpret engineering drawings.</li> <li>Good leadership and team management skills.</li> <li>Knowledge of safety standards and site practices.</li> <li>Strong knowledge of material requirements for elevated water tanks.</li> <li>Understanding of stage-wise construction procedures as per project schedule.</li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Design &amp; Commissioning Engineer Security &amp; Telecom Summary Engineering Graduate with minimum 5-7 years of relevant experience in commissioning of Security system products like Milestone, Genetec, Lenel, CEM System, Softwarehouse, Honelywell, Bosch, Gallaget, Senstar and Southwest Microwave, responsible entire commissioning and technical compliance. Key Job responsibilities and duties Reporting to Technical Lead on all technical related points Analyze system hardware and software requirements for all assigned Security &amp; Telecom System Project BOQ and design properly as per Project requirement Review and ensure Technical Correctness of MAS and Procurement. Designs and/or engineers Security &amp; Telecom systems including but not limited to Access Control system, physical security, intrusion, Video Management System, Fiber optic solution, Structured Cabling solutions, Networking, Telephony, Storage etc. Defines all Technical architectures components including, hardware, software, OS, performance and monitoring of projects assigned, in alignment with all compliance and best practice guidelines. Completes all system design(s) and engineering to core engineering standards. Acts as technical design owner and subject matter expert for assigned projects. Guide and Check system design layouts and installation specifications, including design documents and drawings prepared by Draughtsman/Team. Recommends the use of existing and new technologies to ensure core objectives are met for all security and Telecom projects. Conduct analyses and provide direction and support for Sales/Procurement/Service/Project Team. Maintains expertise in the principles and techniques required for hardware and software system integration. Responsible for all system upgradation and ensure the systems are having latest update. Maintains knowledge of current and emerging technologies and industry best practices related to all security &amp; Telecom systems. Proposes and implements best practices and tools supporting these technologies and practices. Develops system integration skills. Attends industry seminars and /or training sessions in order to stay current with all new security technologies and integration principles. Responsible for successful completion of Factory Acceptance Test, Commissioning, Site Acceptance Test and Client approvals for assigned projects. Develop and articulates a coherent technology architecture and system wide integration for all the Technical Security Systems as project requirement. Inspect, review and approve the erection, cabling and termination works at site as required. Coordinate with system vendors and customer as necessary to implement, integrate, update and test the system. Responsible to maintain the technical documentation as per the standards. Provide the commissioning report, checklist, cause and effect matrix etc., Responsible in managing Teams in delivering client SLA without NCR and in meeting client expectations. Responsible for all technicalities and Level2 &amp; Level3 support to teams in maintaining the Low current systems like CCTV Surveillance Systems, Electronic Access Control Systems, Gates &amp; HVM, PIDS, Electrified Fence, BMS, LCS, AV systems, ICT and Telecom Systems etc. Responsible for all system upgradation and ensure the systems are having latest update. Perform &amp; work on all upgradations [to keep up the systems to latest versions] as per OEM guidelines, migrations, and expansion works in all aspects. Also, to ensure all integration works and compatibility. Responsible for SSA/CarePlus/SUP, and maintaining all clients. Highlight the renewal date of SSA/Careplus/SUP timely to get it renewed. Responsible for handing client technical queries. Conduct Training for Customer and In-house Team. Technical Presentation and lead POC/Demo to customer as required. Responsible to maintain the technical documentation as per the standards. Ensure the client satisfaction throughout the project phase in terms of technical. KPI: K.P.I sTarget % A) System commissioning, SAT and client approvals as per project schedule in line with contractual requirements and product specifications and capabilities. Commissioning the systems, up to the product specs and client expectations in line with the product capabilities B) Pro-active Pre-commissioning and timely and trouble-free commissioning works 35%To maintain all client systems up to date version, and successfully manage upgradation works, Expansion, migration works, to ensure efficient integrations and its compatibility.20%Client SLA and satisfaction levels. In meeting best performance as per ERP analysis.10%Technical documentation works, Service Analysis, better communication internal and external, regular DAR etc10%Expert knowledge on Milestone Xprotect, CEM Systems AC2000, Lenel OnGuard, Pelco VideoXpert, Paxton, Gallagher etc., Technical and Expert Support Levels for all products, and in maintaining product certifications.10%Client Relation and Handlings5%Attitude, Punctuality, Interpersonal skills5%Ensure QHSE and ISO compliance and no NCR in ISO implementation related to Project &amp; service Operations5%</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualification - Professional Engineering Graduate in Electrical, Electronics, Instrumentation, Communication, IT Experience - Engineering Graduate with minimum 5-7 years of relevant experience in managing major turnkey EPC security projects. Preferred Experience of 2-3 years in Middle East region &amp; having valid Oman driving license. 2-3 year Oil &amp; Gas Industrial security projects experience, atleast in 1 major Oil &amp; Gas (Or) Petrochemical EPC Security projects as commissioning Engineer position. The ELV products include Industrial &amp; Commercial CCTV, Integrated high end Access Control, Fire Alarm, Fire Fighting, Intruder Alarm, PAVA systems, Physical Control Equipment, PIDS, BMS, Telecom, A/V systems, ISMS, SMATV, VDP, Gate Automation &amp; residential systems, etc. In addition, the incumbent MUST have related in-depth knowledge on IT &amp; Telecom systems inclusive of database management, Fiber systems, Server &amp; Storage systems, Active &amp; passive components, operating systems, IP domain, redundancy operations in connection with ELV systems specified above.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Lead QAQC Engineer to be seconded to the client office.<br> Position is based in Musandam, Oman for a long-term assignment.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>The Lead QAQC Engineer will be responsible:</p><br><ul> <li>Contribute to Implementation of QA/QC systems, processes and activities as defined in the OQ Project Quality Management Plan.</li> <li>Familiarize with Scope of Work, FEED &amp; Contract requirements, OQ and PMC specifications as applicable to QA/QC.</li> <li>Maintain Project Quality Management System reflecting requirements of OQ specifications, standards, procedures and current best practices, for all project activities.</li> <li>Develop, implement, update the project quality plan as applicable.</li> <li>Provide QA/QC inputs as applicable to project deliverables and decisions.</li> <li>Review and approve Contractor Quality Plans, Programs, Project Quality Documents and Coordination Procedures. Prepare quality assurance procedures.</li> <li>Overview implementation of Project QA/QC plan focusing on the key requirements of OQ Project quality specifications.</li> <li>Plan and implement owner reviews of Contactor and Vendor QA/QC documents and Inspection &amp; testing procedures in line with document distribution matrix. Timely review and approval of QA QC Deliverables i.e. Material Requisitions, Technical Bid Evaluation, EPC Contractor/Subcontractor/ supplier/manufacturer documents, Inspection reports, Welding and NDT procedures, Inspection Test Plans, Quality Control Procedures.</li> <li>Communicate, clarify, align, and set methodologies and procedures for inspection and testing process, between the Vendor, EPC Contractor, TPI and OQ.</li> <li>Engage Third Party Inspection agency (TPI - Local and overseas) and Management of Inspections and Testing using TPI and own Inspectors</li> <li>Monitor Inspection and Quality Control efforts of the EPC Contractor. Participate in Inspection and Testing process as required by the approved QCP/ITP</li> <li>Establish and Participate in Pre-Inspection Meetings for CR I and CR II Equipment and Materials.</li> <li>Develop audit plan and ensure audits are conducted on EPC Contractors and their respective subcontractors or Vendors, for adherence to contract requirements, quality requirements and procedures.</li> <li>Conduct /participate in Project Quality Audits (Internal and External)</li> <li>Review of audit findings, and timely implementation of corrective actions.</li> <li>Implement Non-Conformance and Corrective action systems.</li> <li>In consultation with Project Manager, monitor Project Quality performance to ensure all Project Quality deliverables are accomplished and Quality KPIs are achieved.</li> <li>Monitoring the quality performance of the Contractors.</li> <li>Prepare and present QAQC Reports as required.</li> <li>Monitor Contractors RFT program</li> <li>Monitor Lessons Learned implementation</li> <li>Ensuring that activities carried out by the EPC Contractor are conducted in compliance to their Quality plan, procedures, method statement and Company requirements.</li> <li>Ensuring competent resources are available within the respective QA/QC organization of the EPC Contractors</li> <li>Lead a Team of QA QC engineers/inspectors to complete project inspection tasks.</li> <li>Promote Awareness of the Project Quality Management System.</li> <li>Monitor the process of design and compiling of Project records</li> <li>Review of Manufacturer Data Books / Inspection Record Book/ Project Quality Records</li></ul><p><strong>Designing the future. Transforming the world</strong></p><br><p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.<br> &nbsp;<strong>What we can offer</strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> delivered to leaders of industry across oil and gas&nbsp; and emerging energy sectors&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.</li> <li><strong>Workmen’s Compensation</strong>: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.</li> <li><strong>Employee Assistance Programme:&nbsp;</strong>Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;</p><br><p><strong>Experience:</strong></p><br><ul> <li>University Degree in Mechanical / Chemical or equivalent Engineering Discipline</li> <li>Certified Lead Auditor to any of the Management Systems – ISO 9001 / ISO 14001 / OHSAS 18001.</li> <li>Discipline specific certifications required (e.g. Welding, NDT, Coating etc.)</li></ul><p><strong>Minimum Experience:</strong></p><br><ul> <li>Shall have Minimum of 15 years of experience in Quality Assurance / Quality Control in Oil and Petrochemical Industry. Shall be experienced in Engineering, Procurement and Construction Phases of Engineering Projects in Oil and Gas Industry. Inspection and testing experience at manufacturing units and Construction sites required. Multidiscipline Quality Control experience is preferred. Experience with owner side such as Major Operating Companies, Multinational Project Management Companies preferred.&nbsp;</li> <li>Experience in API 650 Storage Tanks, Process Piping, Onshore Pipeline, Pumps, Package Equipment. Experience in SBM, PLEM, Subsea pipeline, Fiber Optic Cable required for Offshore position.</li> <li>Good Knowledge in the application of industry codes and standards</li></ul> </div>