وظائف مهندس صيانة في سلطنة عمان

<p><strong>Job Title: Security Cameras and Networking Systems Technician (Low Voltage)</strong></p><p><strong>Responsibilities:</strong></p><ul><li>Installation, operation, and maintenance of surveillance cameras.</li><li>Installation, extension, and programming of network systems and low-voltage systems.</li><li>Diagnostics of faults and performing necessary maintenance.</li><li>Preparation and installation of network devices and linking them together.</li><li>Reading drawings and executing tasks according to technical specifications.</li><li>Testing systems and ensuring proper operation.</li><li>Preparing maintenance reports and completed works.</li></ul><p><strong>Requirements:</strong></p><ul><li>Appropriate technical qualification.</li><li>Experience in installing and maintaining surveillance cameras and network systems.</li><li>Good knowledge of low-voltage systems.</li><li>Ability to handle networking and surveillance devices.</li><li>Commitment, accuracy, and ability to work in the field.</li></ul>

<p>Electrical Maintenance: Carry out required daily electrical maintenance work and routine preventative electrical maintenance work according to set schedule and ACWA NOMAC procedures to facilitate continuous operations. Monitor the physical condition of all equipment in assigned plant and report non-conformances to Electrical Engineer / Electrical Supervisor to facilitate effective maintenance of all ACWA NOMAC facilities as per set Quality/ HSE standards. Respond to electrical failures and implement corrective actions in adherence with procedures and guidelines to reduce downtime and maximize functionality of equipment. Trouble shoot using necessary tools which include diagnosis, repairing and testing circuit or wiring faults; locating faults in cables to validate that all connection points and cables are capable of withstanding capacity voltages. Diagnose causes of electrical malfunction or failure of operational equipment such as transformers, motors, relays, switches and control and monitoring devices and take corrective measures in collaboration with Electrical Engineer / Electrical Supervisor. Read and understand technical manuals, wiring diagrams etc., and apply the knowledge to carry out maintenance and troubleshooting tasks, to prepare for the electrical maintenance to equipment in the assigned area. Align, adjust and calibrate equipment according to specifications and to maintain records of repairs, calibrations and tests Documentation : Update the maintenance logbook and record details of work carried out including defaults, problems, various findings and conditions of all equipment to ensure timely availability of information and organised referencing. Continuous Improvement : Contribute in the identification and implementation of change initiatives, programmes and projects in line with the organisation s standards. Policies, Processes, Systems &amp; Procedures Adhere to all relevant organisational and departmental policies, processes, standard maintenance procedures and instructions so that work is carried out to the required standard and in a consistent manner. Health, Safety, Security &amp; Environment Adhere to all relevant health, safety, security and environmental procedures, instructions and controls so that the safety of employees and environmental compliance can be guaranteed. Related Assignments Perform any other duties which the line manager may require to be carried out.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Qualifications: A technical certificate / Associate s Diploma in Electrical maintenance. Minimum Experience: 3-5 years experience in electrical maintenance as a technician in installation, maintenance and repair of electrical equipment and installations in a plant environment. Skills: Practical Knowledge of relevant plant equipment Awareness of HSE &amp; quality standards Team work and effective collaboration skills ISO awareness/working knowledge is preferred</p>

<p><br></p><p><b>About the Role</b></p><p>To carry out maintenance, installation, overhauling and modification activities on plant s electrical machinery and equipment in accordance with standard maintenance procedures, HSE guidelines and quality standards to attain effective functionality and reliability.</p><p>Carry out required daily electrical maintenance work and routine preventative electrical maintenance work according to set schedule and ACWA NOMAC procedures to facilitate continuous operations.</p><p>Monitor the physical condition of all equipment in assigned plant and report non-conformances to Electrical Engineer / Electrical Supervisor to facilitate effective maintenance of all ACWA NOMAC facilities as per set Quality/ HSE standards.</p><p>Respond to electrical failures and implement corrective actions in adherence with procedures and guidelines to reduce downtime and maximize functionality of equipment.</p><p>Trouble shoot using necessary tools which include diagnosis, repairing and testing circuit or wiring faults; locating faults in cables to validate that all connection points and cables are capable of withstanding capacity voltages.</p><p>Diagnose causes of electrical malfunction or failure of operational equipment such as transformers, motors, relays, switches and control and monitoring devices and take corrective measures in collaboration with Electrical Engineer / Electrical Supervisor.</p><p>Read and understand technical manuals, wiring diagrams etc., and apply the knowledge to carry out maintenance and troubleshooting tasks, to prepare for the electrical maintenance to equipment in the assigned area.</p><p>Align, adjust and calibrate equipment according to specifications and to maintain records of repairs, calibrations and tests.</p><p>Inventory:</p><p>Check the necessary stock levels of spare parts to support effective inventory Control.</p><p>Documentation:</p><p>Update the maintenance logbook and record details of work carried out including defaults, problems, various findings and conditions of all equipment to ensure timely availability of information and organised referencing.</p><p>Continous Improvement:</p><p>Contribute in the identification and implementation of change initiatives, programmes and projects in line with the organisation s standards.</p><p>Policies, Processes, Systems &amp; Procedures</p><p>Adhere to all relevant organisational and departmental policies, processes, standard maintenance procedures and instructions so that work is carried out to the required standard and in a consistent manner.</p><p>Health,Safety, Security &amp; Environment</p><p>Adhere to all relevant health, safety, security and environmental procedures, instructions and controls so that the safety of employees and environmental compliance can be guaranteed.</p><p>Related Assignments</p><p>Perform any other duties which the line manager may require to be carried out.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>A technical certificate / Associate s Diploma in Electrical maintenance.</li><li>3-5 years experience in electrical maintenance as a technician in installation, maintenance and repair of electrical equipment and installations in a plant environment.</li><li>Practical Knowledge of relevant plant equipment</li><li>Awareness of HSE &amp; quality standards</li><li>Team work and effective collaboration skills</li><li>ISO awareness/working knowledge is preferred</li></ul>

<p>To carry out maintenance, installation, overhauling and modification activities on plant s electrical machinery and equipment in accordance with standard maintenance procedures, HSE guidelines and quality standards to attain effective functionality and reliability.</p><p>Carry out required daily electrical maintenance work and routine preventative electrical maintenance work according to set schedule and ACWA NOMAC procedures to facilitate continuous operations.</p><p>Monitor the physical condition of all equipment in assigned plant and report non-conformances to Electrical Engineer / Electrical Supervisor to facilitate effective maintenance of all ACWA NOMAC facilities as per set Quality/ HSE standards.</p><p>Respond to electrical failures and implement corrective actions in adherence with procedures and guidelines to reduce downtime and maximize functionality of equipment.</p><p>Trouble shoot using necessary tools which include diagnosis, repairing and testing circuit or wiring faults; locating faults in cables to validate that all connection points and cables are capable of withstanding capacity voltages.</p><p>Diagnose causes of electrical malfunction or failure of operational equipment such as transformers, motors, relays, switches and control and monitoring devices and take corrective measures in collaboration with Electrical Engineer / Electrical Supervisor.</p><p>Read and understand technical manuals, wiring diagrams etc., and apply the knowledge to carry out maintenance and troubleshooting tasks, to prepare for the electrical maintenance to equipment in the assigned area.</p><p>Align, adjust and calibrate equipment according to specifications and to maintain records of repairs, calibrations and tests.</p><p>Inventory:</p><p>Check the necessary stock levels of spare parts to support effective inventory Control.</p><p>Documentation:</p><p>Update the maintenance logbook and record details of work carried out including defaults, problems, various findings and conditions of all equipment to ensure timely availability of information and organised referencing.</p><p>Continous Improvement:</p><p>Contribute in the identification and implementation of change initiatives, programmes and projects in line with the organisation s standards.</p><p>Policies, Processes, Systems &amp; Procedures</p><p>Adhere to all relevant organisational and departmental policies, processes, standard maintenance procedures and instructions so that work is carried out to the required standard and in a consistent manner.</p><p>Health,Safety, Security &amp; Environment</p><p>Adhere to all relevant health, safety, security and environmental procedures, instructions and controls so that the safety of employees and environmental compliance can be guaranteed.</p><p>Related Assignments</p><p>Perform any other duties which the line manager may require to be carried out.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>A technical certificate / Associate s Diploma in Electrical maintenance.</li><li>3-5 years experience in electrical maintenance as a technician in installation, maintenance and repair of electrical equipment and installations in a plant environment.</li><li>Practical Knowledge of relevant plant equipment</li><li>Awareness of HSE &amp; quality standards</li><li>Team work and effective collaboration skills</li><li>ISO awareness/working knowledge is preferred</li></ul>

<p><h4>Mechanical TFA – SGT-4000F / V94.3 Gas Turbine</h4> <p>We are seeking an experienced Mechanical Technical Field Advisor (TFA) with hands-on experience on Siemens SGT-4000F / V94.3 gas turbines.</p> <h4>Key Requirements:</h4> <ul> <li>Proven experience on SGT-4000F / V94.3 gas turbines.</li> <li>Strong mechanical field experience in planned outages, forced outages, inspections, and maintenance activities.</li> <li>Previous working experience with OEMs, particularly Siemens, will be highly preferred.</li> <li>Ability to support outage activities, troubleshooting, and field execution activities on site.</li> <li>Willingness to relocate and work across the Middle East.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Experience in power plant maintenance and outage execution.</li> <li>Strong communication and reporting skills.</li> <li>Ability to work in a multicultural and fast-paced environment.</li> </ul></p><p></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Hydraulics &amp; Lubrication Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of hydraulic and lubrication systems across the Copper Concentrator Plant.The role ensures the safe, reliable, and cost-effective operation of hydraulic power units (HPUs), centralized lubrication systems, oil circulation systems, hydraulic cylinders, pumps, motors, valves, accumulators, filtration systems, cooling systems, gear lubrication systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs.The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of hydraulic and lubrication systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, and associated mechanical equipment.The role works closely with Operations, Reliability, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards</p> <p>Detailed Description </p> <p>HYDRAULICS &amp; LUBRICATION MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for hydraulic and lubrication systems associated with the concentrator plant and supporting infrastructure.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, maintenance standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on hydraulic and lubrication maintenance planning, scheduling, and execution.</p> <p>Establish lubrication excellence and contamination control programs across all critical assets.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for hydraulic power units, lubrication skids, gear lubrication systems, pumps, cylinders, valves, accumulators, filtration systems, coolers, and associated equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>Drive oil analysis and contamination control programs for critical plant equipment.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and budgets for hydraulic and lubrication assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>Develop lubrication routes, inspection programs, and condition-based maintenance plans.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of hydraulic and lubrication system shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors, OEM specialists, and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the integrity and reliability of hydraulic and lubrication systems associated with critical plant assets.</p> <p>Monitor performance of lubrication systems, oil circulation systems, filtration units, accumulators, and hydraulic power units.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>Maintain hydraulic cleanliness targets and lubrication management standards.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education:</p> <p> Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is must.</p> <p> Minimum 8 years of experience in hydraulic and lubrication maintenance and reliability engineering is must.</p> <p> Proven track record of successfully managing maintenance and reliability of critical hydraulic and lubrication assets in large-scale mineral processing plants.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage</p> <p> ICML Machinery Lubrication Technician (MLT)</p> <p> ICML Machinery Lubrication Analyst (MLA)</p> <p> Six-sigma (BB)</p>

<p><br></p><p><strong>Scope of Position</strong><br>The Duty Technician is responsible for the daily operation of the engineering department and for ensuring that the department is operated in the safest and most efficient manner. The Duty Technician will assume the responsibilities of the Duty Engineer during his absence.</p><p><strong>Departmental:</strong></p><ul><li>Maintain proper and safe condition of all Plant, Plant Rooms, Equipment and Work areas.</li><li>Comply with all Fire, Life, Health, and Safety Standards.</li><li>To be conversant with the Hotel Emergency Procedures.</li><li>Perform Emergency Response Team duties as required.</li><li>Personal presentation will be clean, neat, and tidy always.</li><li>Be courteous, professional, and service orientated when dealing with Guest, Patrons, and Fellow Staff Members.</li><li>Assist Guests, Patrons, and Fellow Staff Members as and when appropriate.</li><li>Undertake specific duties and projects when assigned.</li><li>Activity support Training Programs.</li><li>To carry out work in accordance with The Hotel Planned Maintenance Program.</li><li>Familiarize himself with the technical details of all Plant and Services relating to the Hotel.</li><li>Work shifts as designated.</li><li>Maintain, repair, check and record equipment relating to:<ul><li>Guest Facilities</li><li>Plant Rooms</li><li>Air Conditioning Equipment</li><li>Refrigeration Equipment</li><li>Fire, Life, Health, and Safety</li><li>Electrical and Mechanical Services</li><li>Plumbing and Heating</li><li>Entertainment Equipment</li><li>Kitchens</li><li>Lighting</li><li>Furniture, Fittings and General Equipment</li></ul></li><li>Actively support and assist the Duty Engineer</li></ul><p><br></p>

<p><h4>Mechanical TFA – SGT-4000F / V94.3 Gas Turbine</h4> <p>We are seeking an experienced Mechanical Technical Field Advisor (TFA) with hands-on experience on Siemens SGT-4000F / V94.3 gas turbines.</p> <h4>Key Requirements:</h4> <ul> <li>Proven experience on SGT-4000F / V94.3 gas turbines.</li> <li>Strong mechanical field experience in planned outages, forced outages, inspections, and maintenance activities.</li> <li>Previous working experience with OEMs, particularly Siemens, will be highly preferred.</li> <li>Ability to support outage activities, troubleshooting, and field execution activities on site.</li> <li>Willingness to relocate and work across the Middle East.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Experience in power plant maintenance and outage execution.</li> <li>Strong communication and reporting skills.</li> <li>Ability to work in a multicultural and fast-paced environment.</li> </ul></p><p></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Instrumentation Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all instrumentation systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of field instrumentation, analyzers, control valves, actuators, weighing systems, process measurement systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of instrumentation systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p><b>Detailed Description </b></p> <p>INSTRUMENTATION MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for instrumentation systems across the concentrator plant and supporting infrastructure.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, instrumentation standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on instrumentation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for instrumentation systems and equipment.</p> <p>INSTRUMENTATION AUTOMATION / PLC / DCS INTERFACE</p> <p>Provide technical leadership for the interface between field instrumentation and PLC, DCS, SCADA, and associated automation systems.</p> <p>Ensure reliable communication and signal integrity between transmitters, analyzers, control valves, actuators, weighing systems, and PLC/DCS/SCADA systems.</p> <p>Support troubleshooting of instrumentation-related PLC/DCS input and output signals, communication faults, alarms, interlocks, and control-loop performance issues.</p> <p>Coordinate with Automation and Electrical teams for instrument signal interfaces, control system modifications, logic changes, and system upgrades.</p> <p>Review instrumentation requirements for PLC/DCS/SCADA modifications, including I/O requirements, signal types, communication protocols, alarm and trip interfaces, and control-loop functionality.</p> <p>Support loop checking, instrument calibration, functional testing, interlock testing, commissioning, energization, and startup activities involving instrumentation and automation systems.</p> <p>Ensure proper configuration, documentation, and management of instrument I/O, loop drawings, instrument data sheets, cause-and-effect diagrams, alarm settings, and associated technical documentation.</p> <p>Participate in troubleshooting and Root Cause Failure Analysis (RCFA) where instrumentation, PLC/DCS, or communication-system interfaces contribute to equipment or process failures.</p> <p>Support implementation of improvements to process control, instrumentation reliability, measurement accuracy, and automation system performance.</p> <p>Ensure instrumentation and automation interfaces comply with approved engineering standards, OEM requirements, cybersecurity requirements, HSE procedures, and applicable statutory requirements.</p> <p>INSTRUMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for field instrumentation, analyzers, control valves, actuators, weighing systems, sampling systems, and process monitoring equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major instrumentation failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor instrument performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs for critical instrumentation assets.</p> <p>PROCESS INSTRUMENTATION &amp; ANALYZER SYSTEMS</p> <p>Ensure safe and reliable operation of process instrumentation systems.</p> <p>Maintain pressure, flow, level, temperature, density, pH, conductivity, and other process measurement devices.</p> <p>Maintain online analyzers, sampling systems, and associated instrumentation.</p> <p>Monitor instrument accuracy and implement corrective actions where necessary.</p> <p>Ensure compliance with calibration standards and measurement integrity requirements.</p> <p>Support process optimization and operational efficiency initiatives through accurate measurement and monitoring.</p> <p><br></p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Instrumentation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Instrumentation assets in large-scale mineral processing facilities.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP)</p> <p> ISA Certified Control Systems Technician (CCST)</p> <p> ISA Certified Automation Professional (CAP)</p> <p> Six-sigma (BB)</p> <p> </p> <p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Technician Instrument Grade Stream OQEP Function Operated Assets operations - B60 Field Operation Maintenance Location Oman B60 Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to TL B60 Maintenance Direct reports 0 Job purpose </p><p>Execute Instrument Maintenance Works for B-60, under delegated authority and direction from TL Maintenance B-60 as Technical Service provider of maintenance and execution of minor projects, modifications in accordance with the technical standards to maintain the assets through: (1) Leading the design Maintenance instrument services on planned / un-planned maintenance works utilizing best practice. (2) Coordination and supervision of assets, products and maintenance work in the designated area, (3) Implement plans and coordinate instrument maintenance works; in order to ensure plant equipment availability, reliability &amp; optimization of cost / resources while facilitating smooth operations of the plant to meet operational targets.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Main tasks and responsibilities</p><ul><li>Accountable for availability of Instrumentations, Analyzers and Controls systems, UPS/BC and communication system of the area</li><li>Ensure application of best work practices in execution of Instrumentations maintenance jobs.</li><li>Responsible for Instrumentations side of project implementation in SF B-60 facilities.</li><li>Implements the Preventive Maintenance (PM) plan within his section and execution along with work backlogs</li><li>Prepares procurement plan for his section.</li><li>Responsible for preparing the LLF of instruments and its implementations</li><li>Participate in Management of Change (MOC) committee review meetings.</li><li>Ensure Instrument equipment maintenance history &amp; reports are updated in SAP (CMMS)</li><li>Identify the critical issues, repetitive failure of Instrument equipment, done and the RCA Recommendations implemented for the area</li><li>Monitors staff attendance, attitude and implements discipline within the section.</li><li>Prepare annual leave plans</li><li>Directs, supervises and controls all work for instruments maintenance and calibration.</li><li>Receives and analyses periodic reports on instruments maintenance and scheduled turnarounds and determines the best course of action for increasing the Section s efficiency.</li><li>Provides full technical &amp; manpower support during plants shutdown.</li><li>Determines long term instrument maintenance policy and oversees detailed planning of maintenance activities and programs.</li><li>Reviews policies of warehouse materials/spare parts and determines strategy of their handling and procurement and ensures availability.</li><li>Coordinates efforts within the Section to develop guidelines, specifications, best practices and procedures for maintenance of pressure, level, flow, temperature, vibration and pH instruments.</li><li>Maintains technical expertise in functional areas of process instrumentation.</li></ul><p>Key Interactions</p><ul><li>Internal: Field Operators, Shift Team Leader, Panel Operators, Maintenance Coordinator, Process Trainer, Technical Services Department, Sr. / Engineer Operations.</li><li>External: Ministries, Civil Defense, ROP and Neighboring Companies</li></ul><p>Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Qualifications Diploma i in Instrumentation Engineering or similar</li><li>Excellent knowledge of written, read, and spoken English (required), Arabic - Native (desirable)</li><li>2+ years of relevant experience</li><li>Relevant experience in similar role (Oil &amp; Gas)</li><li>Knowledge of maintenance processes for Gas Network operations:</li><li>Knowledge of instrument control loops.</li><li>Familiar with Systems, Applications and Products in data processing (SAP).</li><li>Experience on Local control station/ Plant interface bus and DCS.</li><li>Good knowledge of modern maintenance technologies &amp; maintenance Planning and execution of Instrumentation Equipment s, Analysers, Calibrations, control systems, ESDs</li><li>Experience and knowledge in project planning, cost control, contract development, installation, trouble shooting, and start-up.</li><li>Sound judgment in technical matters with good skills in engineering field materials specifications and international standards.</li><li>Good experience in handling Maintenance Contracts and shutdown related jobs.</li><li>Knowledge of:</li><li>Computerized Maintenance Management Systems (CMMS)</li><li>Expertise in SAP- PM</li><li>Process Equipment Life-Cycle Management</li><li>Good knowledge in Quality Assurance, Quality Control and HSE plans.</li><li>Familiar with techniques for ensuring data integrity with various integration of information/ reports</li><li>Knowledgeable in HSE plans related to maintenance activities.</li><li>Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals.</li><li>Soft:</li><li>Ve rbal and writing reporting skills-effective Communication</li><li>Demonstrated leadership impact to deliver improved and sustained performance</li><li>Able to build relationships within department staff and contractors with a focus on collaboration.</li><li>Ability to manage multiple priorities in a diversified and critical environment.</li><li>Technical:</li><li>Through use of facts</li><li>Troubleshooting and result oriented</li><li>Root Cause Analysis (RCA)</li><li>Reading and interpreting engineering drawings</li><li>Project Management</li><li>Developing and Modifying Technical Procedures</li><li>Ability to align the requirements of operations and maintenance</li><li>Familiar with techniques for ensuring data integrity with various integration of information/ reports</li><li>Knowledge in estimating, budgeting and cost control</li></ul><p></p></section>

<p><b>Brief Posting Description </b></p> <p>The Engineer Crushing &amp; Mills Maintenance is responsible for the maintenance, reliability, availability, and performance optimization of crushing, grinding, milling, screening, conveying, and associated plant equipment within mining and mineral processing operations.The role ensures safe, reliable, and cost-effective operation of crushing and milling assets through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses.</p> <p>Detailed Description </p> <p>CRUSHING &amp; MILLS MAINTENANCE MANAGEMENT</p> <p>Perform maintenance activities for crushing, grinding, screening, milling, conveying, and auxiliary plant equipment.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor plant equipment condition and recommend corrective actions.</p> <p>Ensure compliance with OEM recommendations and maintenance standards.</p> <p>Support long-term equipment lifecycle management initiatives.</p> <p>Provide technical guidance on maintenance planning and execution.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Perform reliability improvement initiatives for crushers, mills, screens, conveyors, feeders, pumps, and associated equipment.</p> <p>Analyze equipment failures and identify reliability improvement opportunities.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify bad actors and implement corrective action plans.</p> <p>Develop reliability-focused maintenance strategies.</p> <p>Monitor equipment performance against reliability KPIs.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and maintenance budgets.</p> <p>Review preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task content.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure maintenance work orders are properly executed and closed in SAP PM.</p> <p>Improve work management processes and maintenance effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Perfom preparation and execution of crusher, mill, and plant shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, and schedules.</p> <p>Coordinate contractors and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical-path activities.</p> <p>Ensure shutdown activities comply with safety and quality requirements.</p> <p>Conduct post-shutdown reviews and lessons learned sessions.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure mechanical integrity of critical crushing and milling equipment.</p> <p>Monitor wear-life performance of liners, crushers, mill components, screens, and conveying systems.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>TECHNICAL SUPPORT &amp; TROUBLESHOOTING</p> <p>Perform advanced troubleshooting support for major equipment failures.</p> <p>Review vibration analysis, thermography, lubrication analysis, and condition monitoring reports.</p> <p>Support operations in resolving equipment performance issues.</p> <p>Evaluate equipment modifications and engineering improvements.</p> <p>Review OEM recommendations and technical reports.</p> <p>Support commissioning and startup of new equipment.</p> <p>CONTINUOUS IMPROVEMENT</p> <p>Coordinate continuous improvement initiatives to improve equipment availability and throughput.</p> <p>Identify opportunities to reduce maintenance costs and unplanned downtime.</p> <p>Implement Lean Maintenance and reliability improvement methodologies.</p> <p>Develop business cases for equipment upgrades and reliability projects.</p> <p>Track benefits realization from improvement initiatives.</p> <p>Promote best practices across maintenance and operations teams.</p> <p>SAFETY, HEALTH, ENVIRONMENT &amp; QUALITY</p> <p>Coordinate a strong safety culture within maintenance activities.</p> <p>Ensure compliance with company HSE policies and statutory requirements.</p> <p>Participate in incident investigations, audits, and risk assessments.</p> <p>Ensure maintenance activities are carried out in accordance with approved procedures.</p> <p>Support implementation of corrective and preventive actions.</p> <p>Ensure compliance with quality and asset management standards.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 5+ years or Higher Diploma with 10+ years of experience in a Concentrator Plant/related process plant with similar type of equipment</p> <p> 5+ years of experience in the mining/processing industry or related.</p> <p> Proven track record of successfully managing maintenance in large-scale processing maintenance</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Six-sigma (BB)</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Automation is responsible for leading the maintenance, reliability, availability, and performance optimization of automation, process control, and industrial digital systems across the Copper Concentrator Plant.</p> <p>The role ensures the safe, reliable, and cost-effective operation of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA systems, Human Machine Interfaces (HMI), industrial communication networks, historians, servers, workstations, and associated automation infrastructure through effective maintenance strategies, shutdown planning, reliability improvement initiatives, cybersecurity compliance, asset integrity management, and continuous improvement programs.The position provides technical leadership to automation personnel, supports operational excellence, and maximizes plant availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of automation and control systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking &amp; Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure.</p> <p>The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>AUTOMATION &amp; CONTROL SYSTEM MANAGEMENT</p> <p>Lead maintenance activities for automation, process control, and industrial digital systems across the concentrator plant.</p> <p>Ensure automation systems support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize system reliability and availability.</p> <p>Monitor automation system performance and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, engineering standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on automation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for automation systems and equipment.</p> <p>DCS, PLC &amp; SCADA SYSTEMS</p> <p>Lead reliability improvement initiatives for DCS, PLC, SCADA, HMI, historian, and control system infrastructure.</p> <p>Manage automation system architecture, configuration, and performance optimization.</p> <p>Support troubleshooting of control logic, process interlocks, alarms, permissives, and control loops.</p> <p>Ensure backup, restore, and disaster recovery procedures are maintained and tested.</p> <p>Manage automation software version control and change management processes.</p> <p>Review and approve DCS, PLC, and SCADA modifications.</p> <p>Ensure documentation, logic diagrams, and system architecture drawings remain updated.</p> <p>MOC &amp; CHANGE GOVERNANCE</p> <p>Ensure automation system modifications, upgrades, software changes, and configuration changes are managed through the approved Management of Change (MOC) process.</p> <p>Review proposed changes to DCS, PLC, SCADA, HMI, historian, control logic, alarms, interlocks, and associated automation infrastructure for technical and operational impacts.</p> <p>Ensure appropriate risk assessments, technical reviews, testing requirements, approvals, and implementation plans are completed before changes are introduced.</p> <p>Coordinate with Operations, Instrumentation, Electrical, Reliability, Projects, and relevant stakeholders during automation change activities.</p> <p>Ensure backup and recovery arrangements are completed before implementing critical system changes.</p> <p>Support FAT, SAT, simulation, functional testing, commissioning, and post-implementation verification of automation modifications.</p> <p>Ensure updated logic diagrams, configuration records, I/O documentation, system architecture drawings, software versions, and other technical documents are maintained following approved changes.</p> <p>Participate in post-change reviews and verify that modifications achieve the intended reliability, safety, control-performance, and operational objectives.</p> <p>PROCESS CONTROL &amp; OPTIMIZATION</p> <p>Support operational performance through advanced process control and automation improvements.</p> <p>Analyze process performance and identify opportunities for control optimization.</p> <p>Support tuning of control loops and optimization of process control strategies.</p> <p>Drive initiatives aimed at improving throughput, recovery, plant stability, and energy efficiency.</p> <p>Support implementation of advanced process control technologies and digital solutions.</p> <p>Work closely with Operations and Metallurgical teams to optimize plant performance.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor's Degree in Automation Engineering, Control Systems Engineering, Electrical &amp; Automation Engineering, Mechatronics Engineering, Instrumentation &amp; Control Engineering, or related discipline is mandatory.</p> <p>Experience:</p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Automation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Automation assets in large-scale mineral processing facilities.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> ISA Certified Automation Professional (CAP)</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP)</p> <p> ISA Certified Control Systems Technician (CCST)</p> <p> Six Sigma (BB)</p> <p><br></p>

<p>JOB CONTENT </p> <p>Ensures the reliability, availability, and performance of OETC s assets. This role involves developing and optimizing maintenance plans using CMMS and leveraging data from the online condition monitoring system. The engineer ensures alignment with global best practices, including ISO 55001, and collaborates with cross-functional teams to address asset performance issues and enhance maintenance strategies</p> <p> Assist with the development of Asset Performance Framework, Strategies, Objectives, Plans, and Asset Risk Register.</p> <p> Develop, upload, and manage annual maintenance plans in the CMMS, utilizing historical data and asset performance trends to optimize reliability and minimize downtime</p> <p> Assist in the development and implementation of best-practice asset management standards, policies, and procedures in line with ISO 55001 and other global standards</p> <p> Review, validate, and update work orders in the CMMS to ensure accuracy, completeness, and compliance with maintenance schedules</p> <p> Identify and address missing, overdue, or incomplete work orders, ensuring data integrity and timely execution of maintenance tasks</p> <p> Monitor the execution of maintenance activities to ensure compliance with approved plans, schedules, and quality standards</p> <p> Follow up on incomplete or delayed maintenance tasks, coordinating with relevant teams to resolve issues and minimize disruptions</p> <p> Prepare and present maintenance progress reports, highlighting key achievements, challenges, and areas for improvement</p> <p> Work closely with relevant departments, including operations, performance engineering, and field teams, to ensure effective maintenance planning and execution</p> <p> Ensure seamless integration of OLCM data with the CMMS to enable data-driven decision-making</p> <p> Collaborate with performance engineers to analyze asset performance data, identify reliability and asset health risks, and provide input to develop proactive and targeted maintenance strategies</p> <p> Highlight performance-related concerns and incorporate them into maintenance plans to address potential risks and improve asset reliability</p> <p> Provide feedback to performance engineers on maintenance outcomes to support continuous improvement and innovation in asset management practices</p> <p> Contribute to continuous improvement initiatives by identifying opportunities to enhance maintenance planning, execution, and asset performance</p> <p> Contribute to the preparation of business and work plans to achieve technical deliverable</p> <p> Manage and review critical spares requirements, coordinating with procurement and inventory teams to ensure the timely availability of resources, tools, and spare parts, minimizing downtime during maintenance activities</p> <p> Contributes to continuous improvement and innovation in optimized asset maintenance plans.</p> <p> Adhere to the Company s health, safety, environmental and security policies always and immediately report violations of these policies to OETC health, safety &amp; environment representatives;</p> <p> Knowledge and Understanding of Asset Management, HSE Management System and IT Security Standard Requirements according to ISO55001, ISO 14001, ISO45001 and ISO 27001 to carry out the assigned duties as per the roles and responsibilities matrix.</p> <p>Job Qualifications and Experience</p> <p>Minimum Qualifications</p> <p> Bachelor s degree in electrical Power Engineering or equivalent </p> <p>Professional Experience </p> <p> 5+ years business experience in the utility of Transmission business</p> <p> </p> <p> </p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Conveyors &amp; Utilities Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of conveyor systems, stacking systems, reclaiming systems, feeders, transfer stations, utility systems, and associated plant equipment within mineral processing operations. The role ensures the safe, reliable, and cost-effective operation of conveyors and utility assets through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses.</p> <p>The incumbent is responsible for the maintenance and reliability of conveyor belts, pulleys, idlers, drives, gearboxes, feeders, stacking systems, reclaiming systems, compressed air systems, process water systems, fire water systems, pumps, utility distribution networks, and associated mechanical equipment. The role works closely with Operations, Reliability, Electrical, Instrumentation, and Project teams to achieve production, safety, utility availability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>CONVEYORS &amp; UTILITIES MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for conveyor systems, transfer stations, feeders, stacking &amp; reclaiming systems, utility systems, pumps, compressors, and auxiliary equipment.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, maintenance standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on maintenance planning, scheduling, and execution.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for conveyors, pulleys, idlers, belt cleaners, drives, gearboxes, feeders, pumps, compressors, and utility systems.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and budgets for conveyor and utility assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of conveyor, stacker, reclaimer, and utility system shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the mechanical integrity of critical conveyors and utility equipment.</p> <p>Monitor wear-life performance of belts, pulleys, idlers, chutes, drives, pumps, compressors, and utility systems.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>TECHNICAL SUPPORT &amp; TROUBLESHOOTING</p> <p>Provide advanced troubleshooting support for major conveyor and utility equipment failures.</p> <p>Review vibration analysis, thermography, lubrication analysis, and condition monitoring reports.</p> <p>Support operations in resolving equipment performance and reliability issues.</p> <p>Evaluate equipment modifications and engineering improvements.</p> <p>Review of OEM recommendations, technical reports, and equipment upgrade proposals.</p> <p>Support commissioning, testing, and startup of new equipment and system modifications.</p> <p>CONTINUOUS IMPROVEMENT</p> <p>Drive continuous improvement initiatives to enhance conveyor availability, material handling efficiency, utility system reliability, and plant throughput.</p> <p>Identify opportunities to reduce maintenance costs and minimize unplanned downtime.</p> <p>Implement reliability improvement and Lean Maintenance methodologies.</p> <p>Develop business cases for equipment upgrades and improvement projects.</p> <p>Track and report benefits realized from improvement initiatives.</p> <p>Promote maintenance and operational best practices across the organization.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in a Concentrator Plant/related process plant with similar type of equipment</p> <p> 8+ years of experience in the mining/processing industry or related.</p> <p> Proven track record of successfully managing maintenance in large-scale processing maintenance</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Six-sigma (BB)</p> <p><br></p>

<p><b>Job Content:</b></p> <p>The implementation and maintenance of all Protection and Metering equipment, ensuring that all policies, procedures and safety rules are adhered to</p> <p><b><br></b></p><p><b>Duties and Responsibilities</b></p> <p> Supervising the checking of the safety documents for all protection equipment</p> <p> Carry out daily safety checks</p> <p> Issuing Safety documents for related Protection activates with Zone</p> <p> Where possible to rectify any safety issues discovered in the checking Reporting all occurrences to the relevant departments across OETC</p> <p> Supervising and carrying out preventative measures to ensure a safe working environment</p> <p> Working within the framework of LOA (Limitation of Access), SFT (Sanction for Test) and PTW (Permit to Work) safety documents</p> <p> Supervising and ensuring that there is continuous availability of the system and that the system is working safely</p> <p> Timely restoration of all outages</p> <p> Preparation of the annual protection maintenance schedule</p> <p> Carry out all maintenance in line with the annual maintenance schedule</p> <p> The collection of data related to the function to be used for protection, devices and meter reference and store this information in the Central Log</p> <p> Analysis the Protection and Metering data and the reporting system operation performance</p> <p> Provide technical expertise to LDC, AMP and Strategic Planning and Project Departments.</p> <p> Fault analysis after tripping occurrences and rectifying to re energize</p> <p> Ensure protective relays function promptly at the time of fault conditions with proper coordination</p> <p> Checking the relays setting calculations, equipment design calculations and the fault level calculations</p> <p> Contribution towards the preparation of Protection and Metering budget, price control and tender documents</p> <p> Attending regular inter departmental meetings for troubleshooting, shut down and commissioning</p> <p> Ensuring 100% availability of spare devices, testing equipment s, relevant documents and testing reports</p> <p> Supporting and implementation of new protection and metering policy and procedures</p> <p> Coordination with the system studies unit in study of any expansion of the protection and metering system of the company</p> <p> Supporting Technicians to carry out all maintenance in accordance with the annual maintenance schedule and procedures</p> <p> Supporting the Technicians to operate safely</p> <p> Testing and commissioning of all Protection devices, Meters and New Grid stations</p> <p> Coordination for Engineering and Design of new projects</p> <p> Providing advice for the selection of new equipment for new projects</p> <p> Supervise the Subcontractors to ensure all safety rules</p> <p> Ensuring all Protection policies, procedures and work-related tasks are carried out correctly</p> <p> Sharing skills and experience with colleagues and supporting the development of others through coaching where possible</p> <p> Implementing and following department protection SOPs.</p> <p><b><br></b></p><p><b>Other Requirement:</b></p> <p> Pass the required protection system authorization assessment, e.g Level 1 &amp;2.</p> <p> Knowledge and Understanding of the Asset Management, HSE Management, Information Security Management, Quality Management, and Business Continuity Management Systems requirements according to ISO 55001, ISO 14001, ISO 45001, ISO 27001, ISO 9001, and ISO 22301 standards to carry out the assigned duties as per the roles and responsibilities matrix.</p> <p> <strong>Education:</strong> </p> <p>- Bachelor s degree in electrical Power Engineering/ Electrical Engineering</p> <p> <strong>Experience:</strong> </p> <p>- Minimum of 5 years in Protection environment</p> <p> </p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Crushing &amp; Mills Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of crushing, grinding, milling, screening, conveying, and associated plant equipment within mining and mineral processing operations.The role ensures safe, reliable, and cost-effective operation of crushing and milling assets through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses.</p> <p><b>Detailed Description </b></p> <p>CRUSHING &amp; MILLS MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for crushing, grinding, screening, milling, conveying, and auxiliary plant equipment.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor plant equipment condition and recommend corrective actions.</p> <p>Ensure compliance with OEM recommendations and maintenance standards.</p> <p>Support long-term equipment lifecycle management initiatives.</p> <p>Provide technical guidance on maintenance planning and execution.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for crushers, mills, screens, conveyors, feeders, pumps, and associated equipment.</p> <p>Analyze equipment failures and identify reliability improvement opportunities.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify bad actors and implement corrective action plans.</p> <p>Develop reliability-focused maintenance strategies.</p> <p>Monitor equipment performance against reliability KPIs.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and maintenance budgets.</p> <p>Review preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task content.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure maintenance work orders are properly executed and closed in SAP PM.</p> <p>Improve work management processes and maintenance effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of crusher, mill, and plant shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, and schedules.</p> <p>Coordinate contractors and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical-path activities.</p> <p>Ensure shutdown activities comply with safety and quality requirements.</p> <p>Conduct post-shutdown reviews and lessons learned sessions.</p> <p>ASSET INTEGRITY MANAGEME</p> <p>Ensure mechanical integrity of critical crushing and milling equipment.</p> <p>Monitor wear-life performance of liners, crushers, mill components, screens, and conveying systems.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>TECHNICAL SUPPORT &amp; TROUBLESHOOTING</p> <p>Provide advanced troubleshooting support for major equipment failures.</p> <p>Review vibration analysis, thermography, lubrication analysis, and condition monitoring reports.</p> <p>Support operations in resolving equipment performance issues.</p> <p>Evaluate equipment modifications and engineering improvements.</p> <p>Review OEM recommendations and technical reports.</p> <p>Support commissioning and startup of new equipment.</p> <p>CONTINUOUS IMPROVEMENT</p> <p>Drive continuous improvement initiatives to improve equipment availability and throughput.</p> <p>Identify opportunities to reduce maintenance costs and unplanned downtime.</p> <p>Implement Lean Maintenance and reliability improvement methodologies.</p> <p>Develop business cases for equipment upgrades and reliability projects.</p> <p>Track benefits realization from improvement initiatives.</p> <p>Promote best practices across maintenance and operations teams.</p> <p>SAFETY, HEALTH, ENVIRONMENT &amp; QUALITY</p> <p>Promote a strong safety culture within maintenance activities.</p> <p>Ensure compliance with company HSE policies and statutory requirements.</p> <p>Participate in incident investigations, audits, and risk assessments.</p> <p>Ensure maintenance activities are carried out in accordance with approved procedures.</p> <p>Support implementation of corrective and preventive actions.</p> <p>Ensure compliance with quality and asset management standards.</p> <p>CONTRACTOR MANAGEMENT</p> <p>Supervise contractors engaged in shutdowns and maintenance activities.</p> <p>Review of contractor performance and safety compliance.</p> <p>Validate maintenance quality and technical deliverables.</p> <p>Ensure contractor activities align with company standards and expectations.</p> <p>PEOPLE LEADERSHIP &amp; DEVELOPMENT</p> <p>Provide technical leadership and mentoring to maintenance supervisors, planners, and technicians.</p> <p>Develop team competencies related to crushing and milling equipment.</p> <p>Support skills development and knowledge transfer initiatives.</p> <p>Promote teamwork, accountability, and continuous improvement culture.</p> <p>Support succession planning and capability development programs.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education</b>: </p> <p> Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in a Concentrator Plant/related process plant with similar type of equipment</p> <p> 8+ years of experience in the mining/processing industry or related.</p> <p> Proven track record of successfully managing maintenance in large-scale processing maintenance</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage</p> <p> Six-sigma (BB)</p> <p><br></p>

<p><strong>Maintenance Management</strong> Executes work order through CMMS (SAP) and coordinates with maintenance engineer for job completion and technical matters. Apply technical craft, techniques, processes and principles and be responsible for all necessary preparation required to carry out mechanical maintenance to equipment/area assigned to him. Report to Maintenance Manager for daily activities spare parts and consumables in the department to update spares availability to cope up with the maintenance requirements. Ensure Environmental Aspect-Impact and Hazard Risk Assessment are carried out, controlled and updated. Implement, monitor and report IMS objectives, Targets and programs. Provide necessary resources for effective implementation and sustenance of IMS. Report IMS performance to the management periodically. Ensure Legal compliance with respect to their scope of activities. Responsible to ensure the compliance to legal requirements, contractual and organizational requirements. Report deviations in Integrated Management System &amp; identify root cause and implement corrective and preventive actions. Ensure aspects identified are monitored and operational controls are followed.</p><p><strong>Health, Safely, Security &amp; Environment</strong> Ensure strict adherence to all relevant HSSE and permit to work system, instructions and controls and procedures are complied with so that the safety of employees and environmental compliance can be guaranteed. Together with HSE department, ensure that safety rules and regulations are fully explained to plant employees / contractor staff and appropriate safety and protective equipment is worn; safety notices are prominently displayed in all work areas and that all accidents and incidents are efficiently investigated and analyzed whilst ensuring that measures are implemented to avoid any recurrence</p><p><strong>Budgets</strong> Responsible for the Preparation of section budget Responsible for the control and monitoring of all maintenance related costs of the section</p><p><strong>Material Management</strong> To prepare purchase requisitions for spare parts and consumables ensuring budgetary constraints and arrange strategic spares availability to cope up with the maintenance requirements.</p><p><strong>Troubleshooting and Technical Guidance</strong> Acquires considerable knowledge of the process and the relevant systems throughout the plant and applies the same to troubleshoot problems and leads the maintenance team in resolving the issues. To performs routine, corrective and preventive maintenance of plant equipment, cleaning of machines related to electrical section. Ensure identification of root cause for the identified non conformances/ deviations and to implement corrective actions/Preventive actions.</p><p><strong>People Management</strong> Identify the competency gap for their subordinate personnel and implement necessary actions. Carry out annual performance evaluation of reporting employees. Provide on-the-job training to new employees and evaluate their OJT Performance. Effective resource utilization. Perform other duties as assigned.</p><p>5. COMMUNICATION &amp; WORKING RELATIONSHIPS:</p><p>Internal: Needs to work closely with O&amp;M Managers, Electrical Technicians, Operations Team.</p><p>External: Work closely with contractors and vendors</p><p><strong>Desired Candidate Profile</strong></p>6. QUALIFICATIONS, EXPERIENCE, &amp; SKILLS:<br>Bachelor of Engineering<br>10 to 12 Years related experience and training or equivalent combination of education and experience<br>Awareness of Quality, Occupational Health &amp; Safety and Environment Management system principles<br>Knowledge of applicable legal requirements<br>Hazard Risk assessment<br>Aspect Impact assessment<br>Investigating skills<br>Knowledge of spillage containment<br>Knowledge of managing HSE emergencies<br>Knowledge of identification, classification and disposal of waste<br>Knowledge of Emission Monitoring<br>Be able to lead the maintenance group.<br>Excellent communication skills in English Language<br>Computer literate. Able to use MS Outlook for correspondence.<br>Be able to use SAP as end user.

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Electrical Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all electrical systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of power generation and distribution systems, substations, transformers, switchgear, motors, motor control centers (MCCs), variable frequency drives (VFDs), electrical protection systems, UPS systems, emergency power systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs.</p> <p>The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of electrical systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Instrumentation, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p><b>ELECTRICAL MAINTENANCE MANAGEMENT</b></p> <p>Lead maintenance activities for electrical systems across the concentrator plant and support infrastructure.</p> <p>Maintenance experience with 33kV/11kV substations, transformers, switchgear, protection systems, and plant-wide HV/LV distribution networks is mandatory</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, electrical standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on electrical maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for electrical systems and equipment.</p> <p>ELECTRICAL SYSTEM RELIABILITY</p> <p>Lead reliability improvement initiatives for transformers, switchgear, substations, motors, MCCs, VFDs, UPS systems, generators, and power distribution equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major electrical failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs including thermography, motor testing, partial discharge monitoring, and power quality assessments.</p> <p>POWER DISTRIBUTION &amp; PROTECTION SYSTEMS</p> <p>Ensure safe and reliable operation of HV and LV power distribution systems.</p> <p>Maintain substations, transformers, switchgear, protection relays, circuit breakers, and associated electrical infrastructure.</p> <p>Review protection settings and coordinate electrical protection studies.</p> <p>Monitor power quality and implement corrective actions where necessary.</p> <p>Support system load analysis, energy optimization, and electrical efficiency initiatives.</p> <p>Ensure compliance with electrical safety regulations and industry best practices.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and budgets for electrical assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of electrical shutdown and turnaround activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors, OEM specialists, and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the integrity and reliability of critical electrical assets.</p> <p>Review inspection and test findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>Support development of asset lifecycle and replacement strategies.</p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p><b> Bachelor s degree in electrical engineering is mandatory</b></p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in electrical maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of electrical assets in large-scale mineral processing facilities.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Ingénieur-e SLI / Support Produit « Systèmes de Drones » expérimenté-e F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Acteur incontournable dans le domaine des hautes technologies de l'optronique, de l'inertiel et de la navigation, le site de Safran Electronics &amp; Defense d'Eragny situé à 20 min de Paris rassemble environ 1300 salariés et dispose d'infrastructures ludiques tels qu'une salle de créativité, un espace de convivialité, et sportives à proximité. <br>Son Centre de Soutien Technique Drones (CSTD) de la Direction du Support et Service Client Défense recherche son-sa futur-e ingénieur-e SLI/Support Produit expérimenté-e « Systèmes de Drones » intéressé-e par les systèmes complexes et la haute technologie. <br>Vous êtes à la recherche d'un poste dynamique et complet ? Cette offre est faite pour vous ! De par votre expérience et votre polyvalence, vous participerez à la conception du système de soutien de nos « systèmes de Drones » et serez également acteur-trice de leur déploiement et de leur support en exploitation. Vos connaissances des standards SLI (ASD S-Series) et des environnements aéronautiques vous permettrons d'assurer vos principales missions : <br>1. Pendant la phase de développement des produits : <br> - Définir et développer le système de soutien au sein de l'équipe Projet par délégation de l'équipe Programme ;<br> - Piloter, avec toutes les parties prenantes, les activités d'ingénierie de support pour définir les éléments de soutien des produits à développer pour supporter les produits après leur entrée en service : plan de maintenance, documentation technique, outils, bancs, formation et rechanges, etc. ; <br> - Réaliser les études de support à la maintenance (maintenabilité, testabilité et réparabilité) du produit et caractériser son système de soutien en cohérence du concept de maintenance retenu ; <br> - Spécifier, dimensionner et contribuer au développement du système de soutien et au maintien de ce système tout au long du cycle de vie du produit ; <br> - Piloter le processus de management de la donnée du système de soutien au sein du processus support ; <br>2. Pendant la phase d'exploitation des produits, vous êtes capable de : <br> - Suivre le comportement des produits en service ; <br> - Être garant du Référentiel technique du dossier d'entretien ; <br> - Supporter techniquement nos clients internes (Directions technique, programme, industrielle) et externes (clients, fournisseurs ...) en s'appuyant sur les experts de divers domaines et avec pour objectif la satisfaction du client : <br> o Réponse technique aux clients et ateliers de maintenance ; <br> o En cas d'événements en opération, résolution de problème à travers diverses étapes : investigation, identification des solutions et rédaction du rapport ; <br> o Participation à la mise à jour des documentations techniques ; <br> o Contribuer à la production des livrables contractuels ; <br> - Réaliser et exploiter les retours d'expériences opérationnelles ; <br> - Contribuer au développement de nouveaux services/produits</p><br><br><p>Dans le cadre de vos activités, vous serez amené-e à effectuer des déplacements en France (principalement) ou à l'étranger (occasionnellement) pendant les phases de développement et d'exploitation des produits de votre périmètre (centres d'essais en vol, bases aériennes, terrestres ou navales, etc.).</p><br><br><p>De formation bac+5, Ingénieur généraliste et/ou aéronautique, vous avez une expérience réussie d'au moins 5 ans dans l'industrie et le domaine du support client.<br>Vous savez faire preuve de rigueur et disposez d'une grande autonomie tout en étant animé d'un excellent esprit d'équipe. <br>De nature pragmatique, avec une grande capacité d'analyse et de synthèse, vous avez le sens de l'engagement pour mener à bien vos missions.<br>Reconnu pour vos excellentes connaissances métier SLI, et de par votre expérience, vous avez la capacité à encadrer une petite équipe d'ingénieur SLI. Vous êtes pédagogue, et vous avez à coeur de transmettre et d'accompagner la montée en compétence de l'équipe. </p><br><br><br> </div>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Flotation &amp; De-watering Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of flotation, thickening, filtration, dewatering, slurry handling, and associated process plant equipment within mineral processing operations.</p> <p>The role ensures the safe, reliable, and cost-effective operation of flotation and dewatering assets through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs, production losses, and process interruptions.The incumbent is responsible for the maintenance and reliability of flotation cells, Concorde Cells, reagent systems, slurry pumps, concentrate and tailings thickeners, filtration equipment, process water recovery systems, and associated mechanical equipment. The role works closely with Operations, Process, Reliability, and Project teams to achieve production, recovery, concentrating quality, water recovery, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p><b>Detailed Description </b></p> <p>FLOTATION &amp; DE-WATERING MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for flotation cells, reagent preparation and dosing systems, concentrate and tailings thickeners, filtration systems, slurry pumps, pipelines, and associated auxiliary equipment.</p> <p>Ensure maintenance practices support safe, reliable, and efficient operation of flotation and dewatering facilities.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability, availability, and process performance.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, maintenance standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on maintenance planning, scheduling, and execution.</p> <p>EQUIPMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for flotation cells, thickeners, filter systems, pumps, agitators, blowers, and associated equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major equipment breakdowns.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support the development of annual maintenance plans and budgets for flotation and dewatering assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of flotation, thickening, filtration, and dewatering plant shutdown activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the mechanical integrity of critical flotation and dewatering equipment.</p> <p>Monitor wear-life performance of flotation mechanisms, thickener components, filter assemblies, pumps, piping systems, and associated equipment.</p> <p>Review inspection findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>TECHNICAL SUPPORT &amp; TROUBLESHOOTING</p> <p>Provide advanced troubleshooting support for major flotation and dewatering equipment failures.</p> <p>Review vibration analysis, thermography, lubrication analysis, and condition monitoring reports.</p> <p>Support operations in resolving equipment performance and process reliability issues.</p> <p>Evaluate equipment modifications and engineering improvements.</p> <p>Review OEM recommendations, technical reports, and equipment upgrade proposals.</p> <p>Support commissioning, testing, and startup of new equipment and system modifications.</p> <p>CONTINUOUS IMPROVEMENT</p> <p>Drive continuous improvement initiatives to enhance equipment availability, process recovery, throughput, and&nbsp;</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: Bachelor s degree in mechanical engineering or a related field or higher Diploma</p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in a Concentrator Plant/related process plant with similar type of equipment</p> <p> 8+ years of experience in the mining/processing industry or related.</p> <p> Proven track record of successfully managing maintenance in large-scale processing maintenance</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p><br></p>