PLC Engineer Jobs in Oman

<p>The Automation Engineer is responsible for ensuring the safe, reliable, and efficient operation of all automation, control, PLC, SCADA, communication, and industrial network systems supporting the container terminal. The role focuses on maintaining and improving the performance of semi-automated Ship-to-Shore (STS) cranes, Rubber-Tyred Gantry (RTG) cranes, and associated terminal automation systems to maximize equipment availability and operational efficiency. The Automation Engineer works closely with Maintenance, Operations, IT, OEMs, and contractors to troubleshoot automation issues, implement system improvements, and support digitalization and predictive maintenance initiatives.</p><p>KEY ACCOUNTABILITIES</p><p>Automation &amp; Control Systems</p><ul><li>Maintain, troubleshoot, and optimize PLC, HMI, SCADA, and control systems for semi-automated STS and RTG cranes.</li><li>Perform software modifications, diagnostics, commissioning, and system testing.</li><li>Ensure all automation systems operate safely, reliably, and in accordance with OEM standards.</li></ul><p>PLC Programming &amp; Industrial Control</p><ul><li>Develop, modify, troubleshoot, and maintain PLC programs using Siemens TIA Portal/STEP 7 and other OEM platforms.</li><li>Configure and maintain remote I/O, safety PLCs, VFDs, encoders, sensors, laser positioning, and motion control systems.</li><li>Perform software backups, version control, and restoration of PLC and automation programs.</li></ul><p>Automation Servers &amp; OT Infrastructure</p><ul><li>Maintain the automation server infrastructure supporting crane operations, including application servers, engineering workstations, databases, and virtual environments.</li><li>Monitor server performance, system health, storage capacity, backups, redundancy, and disaster recovery.</li><li>Coordinate software updates, patches, and system upgrades with OEMs and the IT Department while minimizing operational disruption.</li></ul><p>Remote Operation &amp; Communication Systems</p><ul><li>Maintain and troubleshoot communication between Liebherr Automation Servers, STS/RTG cranes, Remote Operator Stations (ROS), Engineering Workstations, and the Terminal Operating System (TOS).</li><li>Support and maintain the wireless/radio communication network used for remote operation of RTGs, ensuring reliable communication between the RTGs, ROS stations, and central automation servers.</li><li>Diagnose and resolve communication failures, latency, synchronization issues, and network interruptions affecting crane operation.</li></ul><p>Industrial Networks</p><ul><li>Maintain and troubleshoot industrial communication networks including Fiber Optic networks, Industrial Ethernet, Profinet, Profibus, Modbus TCP/IP, Ethernet/IP, managed switches, routers, wireless access points, and communication gateways.</li><li>Ensure high network availability, redundancy, cybersecurity, and reliable data exchange between automation devices.</li></ul><p>Camera &amp; Vision Systems</p><ul><li>Maintain, configure, and troubleshoot all crane camera and vision systems, including spreader, trolley, boom, gantry, hoist, anti-collision, OCR, and CCTV cameras.</li><li>Ensure reliable video transmission, recording, and display at Remote Operator Stations.</li><li>Coordinate calibration, replacement, and commissioning of cameras and vision equipment.</li></ul><p>System Integration</p><ul><li>Support integration and communication between crane automation systems, PLCs, SCADA, ROS, TOS, CMMS, drive systems, anti-collision systems, positioning systems, and other terminal operational technologies.</li><li>Work closely with OEMs and IT to ensure seamless integration of new automation technologies and software upgrades.</li></ul><p>CMMS &amp; Reliability</p><ul><li>Develop preventive maintenance plans for automation systems using the CMMS.</li><li>Record maintenance activities, software revisions, equipment history, and recurring failures.</li><li>Perform Root Cause Analysis (RCA) and implement corrective actions to improve equipment reliability and reduce downtime.</li></ul><p>Cybersecurity &amp; Data Integrity</p><ul><li>Support OT cybersecurity by maintaining secure user access, backup procedures, antivirus protection, network segmentation, and disaster recovery plans.</li><li>Ensure automation software, PLC programs, and server configurations are securely backed up and protected against unauthorized access.</li></ul><p>Technical Support &amp; Continuous Improvement</p><ul><li>Provide technical support during equipment breakdowns and commissioning activities.</li><li>Lead automation fault investigations and recommend system improvements to increase equipment availability and operational efficiency.</li><li>Evaluate new technologies and recommend automation enhancements that improve safety, reliability, and productivity.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in electrical engineering, Automation Engineering, Control Systems, Mechatronics, or a related discipline.</li><li>Professional certification in PLC programming, industrial automation, or control systems is preferred.</li><li>Minimum 5 years of experience in industrial automation or electrical control systems, preferably within a container terminal, port, or heavy industrial environment.</li><li>Proven experience with semi-automated STS and RTG cranes and OEM automation systems (e.g., Liebherr, Siemens, ABB, Konecranes, or ZPMC).</li><li>Hands-on experience with PLC, SCADA, HMI, VFDs, industrial networks, automation servers, Remote Operator Stations (ROS), radio communication systems, camera systems, and Terminal Operating System (TOS) integration.</li><li>Experience using CMMS/EAM systems (e.g., SAP PM, Maximo, Hexagon) for maintenance planning and asset management.</li><li>Strong troubleshooting, commissioning, Root Cause Analysis (RCA), and contractor/OEM coordination experience.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Graduate Electrical Engineer or I&amp;amp;C with 7-10 years of experience in estimation of <br><br>EPC/Turnkey projects, should estimate projects related to Electrical, Instrumentation<br><br>&amp;amp; Control, process equipment installations, controls system upgrade, PLC/SCADA,<br><br>Cable installation, MCC, VFD, Switch gear installation and related scope of work.<br><br>Estimation of Saudi Aramco, SABIC projects shall be added advantage.<br><br>Graduate Mechanical Engineer with 7-10 years of experience in estimation of <br><br>EPC/Turnkey projects, should estimate projects related to Oil &amp;amp; gas pipeline<br><br>installation, process equipment installations, Tanks, structure installation and related<br><br>scope of work. Estimation of Saudi Aramco, SABIC projects shall be added<br><br>advantage<br><br></span><br><span>RequirementsEstimation Engineer (Mechanical)<br><br>Estimation Engineer (Electrical/I&amp;C)<br><br></span><br> </div>

<p><b>Brief Posting Description </b></p> <p>The Engineer Automation is responsible for supporting the maintenance, reliability, availability, and performance optimization of automation, process control, and industrial digital systems across the Copper Concentrator Plant. The role supports the safe, reliable, and cost-effective operation of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA systems, Human Machine Interfaces (HMI), industrial communication networks, historians, servers, workstations, and associated automation infrastructure through maintenance execution, troubleshooting, cybersecurity compliance, shutdown support, commissioning activities, and continuous improvement initiatives.</p> <p>The position provides technical support to maintenance teams and contractors and is responsible for maintaining automation and control systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking &amp; Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure.</p> <p>The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p><b>Detailed Description </b></p> <p>AUTOMATION &amp; CONTROL SYSTEM MANAGEMENT</p> <p>Support maintenance activities for automation, process control, and industrial digital systems across the concentrator plant.</p> <p>Ensure automation systems support safe, reliable, and efficient plant operation.</p> <p>Assist in implementing maintenance strategies to improve system reliability and availability.</p> <p>Monitor automation system performance and recommend corrective actions.</p> <p>Ensure compliance with OEM recommendations, engineering standards, and statutory requirements.</p> <p>Support asset lifecycle management and replacement planning activities.</p> <p>Provide technical support for automation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and operational readiness activities.</p> <p>DCS, PLC &amp; SCADA SYSTEMS</p> <p>Support reliability improvement initiatives for DCS, PLC, SCADA, HMI, historian, and control system infrastructure.</p> <p>Assist with automation system configuration, maintenance, and performance optimization.</p> <p>Troubleshoot control logic, process interlocks, alarms, permissives, and control loops.</p> <p>Support backup, restore, and disaster recovery activities.</p> <p>Assist with software version control and change management processes.</p> <p>Support testing and verification of DCS, PLC, and SCADA modifications.</p> <p>Maintain automation documentation, logic diagrams, and system records.</p> <p>MOC &amp; CHANGE GOVERNANCE</p> <p>Support implementation of approved Management of Change (MOC) requirements for automation modifications and software changes.</p> <p>Assist in reviewing proposed changes to DCS, PLC, SCADA, HMI, historian, control logic, alarms, interlocks, and associated automation infrastructure.</p> <p>Participate in risk assessments, testing, validation, and documentation activities associated with approved changes.</p> <p>Coordinate with Operations, Instrumentation, Electrical, Reliability, and Projects teams during implementation activities.</p> <p>Support FAT, SAT, simulation testing, commissioning, and post-implementation verification activities.</p> <p>Ensure technical documentation remains updated following approved modifications.</p> <p>Participate in post-change reviews and verification activities.</p> <p>PROCESS CONTROL &amp; OPTIMIZATION</p> <p>Support process control and automation improvement initiatives.</p> <p>Analyze process performance and identify opportunities for control-loop optimization.</p> <p>Assist with control-loop tuning and performance monitoring.</p> <p>Support initiatives aimed at improving throughput, recovery, plant stability, and energy efficiency.</p> <p>Support implementation of advanced process control technologies and digital solutions.</p> <p>Work closely with Operations and Metallurgical teams to optimize plant performance</p> <p>IT/OT CYBERSECURITY INTERFACE</p> <p>Support implementation of cybersecurity requirements for DCS, PLC, SCADA, HMI, historians, servers, workstations, and industrial communication networks.</p> <p>Assist with user access management, backup verification, patching activities, and cybersecurity compliance requirements.</p> <p>Participate in cybersecurity audits, vulnerability assessments, and incident investigations as required.</p> <p>Support cybersecurity-related upgrades and remediation activities.</p> <p>Ensure automation activities comply with approved OT cybersecurity policies and procedures.</p> <p>Maintain coordination between IT, OT Cybersecurity, Automation, Instrumentation, Electrical, Operations, and Project teams.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor's Degree in Automation Engineering, Control Systems Engineering, Electrical &amp; Automation Engineering, Mechatronics Engineering, Instrumentation &amp; Control Engineering, or related discipline is mandatory.</p> <p><b>Experience</b>: </p> <p> Bachelor s Degree with 5+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 3 years of experience in Automation maintenance and reliability engineering is mandatory.</p> <p> Experience supporting DCS, PLC, SCADA, and industrial communication systems in mineral processing or heavy&nbsp;</p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Instrumentation Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all instrumentation systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of field instrumentation, analyzers, control valves, actuators, weighing systems, process measurement systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of instrumentation systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>INSTRUMENTATION MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for instrumentation systems across the concentrator plant and supporting infrastructure.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, instrumentation standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on instrumentation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for instrumentation systems and equipment.</p> <p>INSTRUMENTATION AUTOMATION / PLC / DCS INTERFACE</p> <p>Provide technical leadership for the interface between field instrumentation and PLC, DCS, SCADA, and associated automation systems.</p> <p>Ensure reliable communication and signal integrity between transmitters, analyzers, control valves, actuators, weighing systems, and PLC/DCS/SCADA systems.</p> <p>Support troubleshooting of instrumentation-related PLC/DCS input and output signals, communication faults, alarms, interlocks, and control-loop performance issues.</p> <p>Coordinate with Automation and Electrical teams for instrument signal interfaces, control system modifications, logic changes, and system upgrades.</p> <p>Review instrumentation requirements for PLC/DCS/SCADA modifications, including I/O requirements, signal types, communication protocols, alarm and trip interfaces, and control-loop functionality.</p> <p>Support loop checking, instrument calibration, functional testing, interlock testing, commissioning, energization, and startup activities involving instrumentation and automation systems.</p> <p>Ensure proper configuration, documentation, and management of instrument I/O, loop drawings, instrument data sheets, cause-and-effect diagrams, alarm settings, and associated technical documentation.</p> <p>Participate in troubleshooting and Root Cause Failure Analysis (RCFA) where instrumentation, PLC/DCS, or communication-system interfaces contribute to equipment or process failures.</p> <p>Support implementation of improvements to process control, instrumentation reliability, measurement accuracy, and automation system performance.</p> <p>Ensure instrumentation and automation interfaces comply with approved engineering standards, OEM requirements, cybersecurity requirements, HSE procedures, and applicable statutory requirements.</p> <p>INSTRUMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for field instrumentation, analyzers, control valves, actuators, weighing systems, sampling systems, and process monitoring equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major instrumentation failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor instrument performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs for critical instrumentation assets.</p> <p>PROCESS INSTRUMENTATION &amp; ANALYZER SYSTEMS</p> <p>Ensure safe and reliable operation of process instrumentation systems.</p> <p>Maintain pressure, flow, level, temperature, density, pH, conductivity, and other process measurement devices.</p> <p>Maintain online analyzers, sampling systems, and associated instrumentation.</p> <p>Monitor instrument accuracy and implement corrective actions where necessary.</p> <p>Ensure compliance with calibration standards and measurement integrity requirements.</p> <p>Support process optimization and operational efficiency initiatives through accurate measurement and monitoring.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor's Degree in Instrumentation, Electronics, Control Systems, Automation, Mechatronics, or Electrical &amp; Instrumentation Engineering is mandatory.</p> <p><b>Experience</b>: </p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Instrumentation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Instrumentation assets in large-scale mineral processing facilities.</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Instrumentation Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all instrumentation systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of field instrumentation, analyzers, control valves, actuators, weighing systems, process measurement systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs. The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of instrumentation systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p><b>Detailed Description </b></p> <p>INSTRUMENTATION MAINTENANCE MANAGEMENT</p> <p>Lead maintenance activities for instrumentation systems across the concentrator plant and supporting infrastructure.</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, instrumentation standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on instrumentation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for instrumentation systems and equipment.</p> <p>INSTRUMENTATION AUTOMATION / PLC / DCS INTERFACE</p> <p>Provide technical leadership for the interface between field instrumentation and PLC, DCS, SCADA, and associated automation systems.</p> <p>Ensure reliable communication and signal integrity between transmitters, analyzers, control valves, actuators, weighing systems, and PLC/DCS/SCADA systems.</p> <p>Support troubleshooting of instrumentation-related PLC/DCS input and output signals, communication faults, alarms, interlocks, and control-loop performance issues.</p> <p>Coordinate with Automation and Electrical teams for instrument signal interfaces, control system modifications, logic changes, and system upgrades.</p> <p>Review instrumentation requirements for PLC/DCS/SCADA modifications, including I/O requirements, signal types, communication protocols, alarm and trip interfaces, and control-loop functionality.</p> <p>Support loop checking, instrument calibration, functional testing, interlock testing, commissioning, energization, and startup activities involving instrumentation and automation systems.</p> <p>Ensure proper configuration, documentation, and management of instrument I/O, loop drawings, instrument data sheets, cause-and-effect diagrams, alarm settings, and associated technical documentation.</p> <p>Participate in troubleshooting and Root Cause Failure Analysis (RCFA) where instrumentation, PLC/DCS, or communication-system interfaces contribute to equipment or process failures.</p> <p>Support implementation of improvements to process control, instrumentation reliability, measurement accuracy, and automation system performance.</p> <p>Ensure instrumentation and automation interfaces comply with approved engineering standards, OEM requirements, cybersecurity requirements, HSE procedures, and applicable statutory requirements.</p> <p>INSTRUMENT RELIABILITY &amp; PERFORMANCE</p> <p>Lead reliability improvement initiatives for field instrumentation, analyzers, control valves, actuators, weighing systems, sampling systems, and process monitoring equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major instrumentation failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor instrument performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs for critical instrumentation assets.</p> <p>PROCESS INSTRUMENTATION &amp; ANALYZER SYSTEMS</p> <p>Ensure safe and reliable operation of process instrumentation systems.</p> <p>Maintain pressure, flow, level, temperature, density, pH, conductivity, and other process measurement devices.</p> <p>Maintain online analyzers, sampling systems, and associated instrumentation.</p> <p>Monitor instrument accuracy and implement corrective actions where necessary.</p> <p>Ensure compliance with calibration standards and measurement integrity requirements.</p> <p>Support process optimization and operational efficiency initiatives through accurate measurement and monitoring.</p> <p><br></p> <p><b>Experience: </b></p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Instrumentation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Instrumentation assets in large-scale mineral processing facilities.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP)</p> <p> ISA Certified Control Systems Technician (CCST)</p> <p> ISA Certified Automation Professional (CAP)</p> <p> Six-sigma (BB)</p> <p> </p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Automation is responsible for leading the maintenance, reliability, availability, and performance optimization of automation, process control, and industrial digital systems across the Copper Concentrator Plant.</p> <p>The role ensures the safe, reliable, and cost-effective operation of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA systems, Human Machine Interfaces (HMI), industrial communication networks, historians, servers, workstations, and associated automation infrastructure through effective maintenance strategies, shutdown planning, reliability improvement initiatives, cybersecurity compliance, asset integrity management, and continuous improvement programs.The position provides technical leadership to automation personnel, supports operational excellence, and maximizes plant availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of automation and control systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking &amp; Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure.</p> <p>The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>AUTOMATION &amp; CONTROL SYSTEM MANAGEMENT</p> <p>Lead maintenance activities for automation, process control, and industrial digital systems across the concentrator plant.</p> <p>Ensure automation systems support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize system reliability and availability.</p> <p>Monitor automation system performance and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, engineering standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on automation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for automation systems and equipment.</p> <p>DCS, PLC &amp; SCADA SYSTEMS</p> <p>Lead reliability improvement initiatives for DCS, PLC, SCADA, HMI, historian, and control system infrastructure.</p> <p>Manage automation system architecture, configuration, and performance optimization.</p> <p>Support troubleshooting of control logic, process interlocks, alarms, permissives, and control loops.</p> <p>Ensure backup, restore, and disaster recovery procedures are maintained and tested.</p> <p>Manage automation software version control and change management processes.</p> <p>Review and approve DCS, PLC, and SCADA modifications.</p> <p>Ensure documentation, logic diagrams, and system architecture drawings remain updated.</p> <p>MOC &amp; CHANGE GOVERNANCE</p> <p>Ensure automation system modifications, upgrades, software changes, and configuration changes are managed through the approved Management of Change (MOC) process.</p> <p>Review proposed changes to DCS, PLC, SCADA, HMI, historian, control logic, alarms, interlocks, and associated automation infrastructure for technical and operational impacts.</p> <p>Ensure appropriate risk assessments, technical reviews, testing requirements, approvals, and implementation plans are completed before changes are introduced.</p> <p>Coordinate with Operations, Instrumentation, Electrical, Reliability, Projects, and relevant stakeholders during automation change activities.</p> <p>Ensure backup and recovery arrangements are completed before implementing critical system changes.</p> <p>Support FAT, SAT, simulation, functional testing, commissioning, and post-implementation verification of automation modifications.</p> <p>Ensure updated logic diagrams, configuration records, I/O documentation, system architecture drawings, software versions, and other technical documents are maintained following approved changes.</p> <p>Participate in post-change reviews and verify that modifications achieve the intended reliability, safety, control-performance, and operational objectives.</p> <p>PROCESS CONTROL &amp; OPTIMIZATION</p> <p>Support operational performance through advanced process control and automation improvements.</p> <p>Analyze process performance and identify opportunities for control optimization.</p> <p>Support tuning of control loops and optimization of process control strategies.</p> <p>Drive initiatives aimed at improving throughput, recovery, plant stability, and energy efficiency.</p> <p>Support implementation of advanced process control technologies and digital solutions.</p> <p>Work closely with Operations and Metallurgical teams to optimize plant performance.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor's Degree in Automation Engineering, Control Systems Engineering, Electrical &amp; Automation Engineering, Mechatronics Engineering, Instrumentation &amp; Control Engineering, or related discipline is mandatory.</p> <p>Experience:</p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Automation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Automation assets in large-scale mineral processing facilities.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> ISA Certified Automation Professional (CAP)</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP)</p> <p> ISA Certified Control Systems Technician (CCST)</p> <p> Six Sigma (BB)</p> <p><br></p>

<ul><li><p>The scope of the position is to install, maintain, troubleshoot, and repair a wide variety of industrial instruments, which include, electronic monitoring, metering, controlling, signaling devices used in petrochemical process industry</p></li></ul><br><p><strong>Operational</strong></p><ul><li><p>Install, repair, and maintain plant control and process monitoring instrumentation. This includes electronic, pneumatic, hydraulic, and microprocessor-based control and monitoring systems.</p></li><li><p>Read/interpret engineering drawings and manuals to install, calibrate and maintain plant instrumentation systems.</p></li><li><p>Observe installed systems to detect hazards and determine the need for adjustments and modifications.</p></li><li><p>Ability to use test and calibration equipment to calibrate transmitters and control loops.</p></li><li><p>Troubleshooting and rectifying any faults in sheet lines, HTM plant, conveying system, chips cutter system, compressors, chillers, steam boiler, bagging system, weighbridge, wastewater plant, fire detection system and all other systems on site.</p></li><li><p>Responsible for the calibration and preventive maintenance of valves / PLC / DCS system, Continuous emission monitoring systems as per the schedule.</p></li><li><p>Responsible for the calibration of all types of measuring instruments (flow meter / temperature transmitter / pressure gauges / temp gauges / Pressure transmitters).</p></li><li><p>To review and update work order closure history, time function and job details.</p></li><li><p>Assisting the Instrument Engineer in any plant modification and carrying out wiring, cable laying and termination work.</p></li><li><p>Reporting any breakdown or failure in plant equipment to Instrumentation Engineer and assist team by trouble shooting, repairing the equipment with necessary tools, and measuring instruments.</p></li><li><p>Adheres to the health and safety working practices and procedures within the company</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>A diploma or certificate proven Technical Skills in Instrumentation.</p></li><li><p>3 years or more experience in Petrochemicals/PET resin plant.</p></li><li><p>Experience in calibration/repairs of all types of instruments</p></li><li><p>Well conversant with working principle of all types of instruments.</p></li><li><p>Skills in calibration/repairs of all types of instruments.</p></li><li><p>Skills in Reading of Electrical drawings and P&IDs.</p></li><li><p>Skills and Knowledge of operation of the systems as Cutters/HTM plant/Boiler/Chillers/Compressors.</p></li><li><p>Ability to analyze the problems and solve it systematically following safe procedures</p></li></ul>

<p>Job Description Position: Electrical Engineer Location: Oman, Sohar The Scope of Work: Maintenance, upkeep, and fault handling of all electrical equipment throughout the factory premises. Major Responsibilities: 1. Be responsible for technical management of electrical systems, transformer,distribution cabinets, motors, inverters, PLC and sensors. 2.Analyze, troubleshoot and repair electrical faults, deal with tripping, communication failure and component damage 3.Compile electrical check list, maintenance plan and SOP; update electrical drawings and wiring diagrams 4.Provide electrical technical support for operation &amp; shift staff, conduct technical training 5.Implement electrical safety management: earthing, insulation test, LOTO lockout tagout, high voltage operation safety control Minor Responsibilities: 1.Review electrical modification &amp; new project schemes; perform on site installation, commissioning and power on test 2.Record equipment abnormalities &amp; accidents, write failure reports and formulate corrective &amp; preventive actions 3.Evaluate and apply for electrical spare parts; count component consumption and control spare part cost Performance Standards: Safety management: Neither I nor my subordinates experience any safety incidents or work-related accidents during the month, and the number of instances of red-ink incidents does not exceed 1time. Quality of supply: Ensure stable supply quality and prevent supply interruptions caused by human errors or inadequate management. Ensure that the workgroup performs maintenance and upkeep according to the equipment maintenance plan, implements maintenance tasks, and reduces the frequency of equipment failures.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications: 1. College degree or above, major in Electrical Automation, Mechatronics, Electrical Engineering and related fields. 2. Familiar with high/low-voltage electrical circuit, distribution cabinet wiring, motor control, sensors and electric-pneumatic control principle. 3.Able to read electrical schematics and wiring drawings, independently complete inspection, maintenance and technical improvement 4. Familiar with factory electrical safety standards, master LOTO, insulation test and grounding inspection. 5. Strong fault analysis and problem-solving ability, able to handle electrical abnormalities efficiently 6. Hold valid High Voltage/Low-Voltage/ Electrician Certificate is a plus.</p>

<p>Responsible for configuration, maintenance, and optimization of SCADA systems used for monitoring and control of wastewater treatment plants, lifting stations, and associated infrastructure, ensuring system reliability, accurate alarm management, and operational efficiency.</p><p>Configure and maintain SCADA servers, clients, and historian systems. Develop and update HMI screens, trends, and reporting dashboards. Implement alarm configuration, rationalization, and performance optimization. Integrate new PLCs/RTUs and field devices into the SCADA system. Perform system backups, patching coordination, and version control. Support FAT, SAT, commissioning, and system upgrades. Ensure data integrity and accuracy for operational and regulatory reporting. Provide technical support to operations and maintenance teams. Perform any other duties assigned by NDS Management as required.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Electrical, Instrumentation, or Control Engineering. Minimum 8 years of experience in SCADA system configuration and maintenance within industrial environments (water/wastewater preferred). Experience in PLC/RTU integration and industrial communication protocols. Familiarity with Windows Server environments, virtualization, and SCADA redundancy setups.</p><p>Preferred Certifications: Project-specific SCADA platform certification PLC programming certification ISA training (ISA-95 / ISA-99 awareness)</p>

<p>Position: E&amp;I Shift In-Charge</p><p>We are looking for an experienced E&amp;I Shift In-Charge to manage the operation, maintenance and troubleshooting of electrical and instrumentation systems in a bulk material handling/port environment.</p><p>Key Responsibilities:</p><ul><li>Manage preventive, predictive and corrective maintenance of electrical and instrumentation systems.</li><li>Handle operation, maintenance and troubleshooting of 11kV/440V substations with SCADA control.</li><li>Troubleshoot Siemens S7 PLC/DCS, SCADA, VFDs and industrial drives.</li><li>Handle maintenance, calibration and troubleshooting of field instruments, transmitters and flowmeters.</li><li>Handle F&amp;G, FACP and CACP systems.</li><li>Supervise maintenance teams during shutdowns, breakdowns and emergency maintenance.</li><li>Troubleshoot stackers, reclaimers, conveyors, wagon loaders, silos and ship loaders.</li><li>Maintain SAP work orders, maintenance records and calibration reports.</li><li>Coordinate with operations and control-room teams to ensure smooth equipment performance.</li><li>Ensure compliance with HSE procedures, PTW, risk assessments and safety standards.</li><li>Support maintenance planning, spare parts management and technical procurement.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Required Qualifications &amp; Experience:</strong></p><ul><li>B.E./B.Tech in Electrical &amp; Electronics/Electrical Engineering with 7 10 years of relevant experience, OR Diploma in Electrical &amp; Electronics/Instrumentation with 10 13 years of relevant experience.</li><li>Experience in Electrical &amp; Instrumentation maintenance, automation and industrial/port environments.</li><li>Hands-on experience with PLCs, SCADA, VFDs, substations and field instrumentation.</li><li>Knowledge of Profibus, Profinet and Modbus is preferred.</li><li>Experience with bulk material handling equipment such as stackers, reclaimers, conveyors and ship loaders is highly preferred.</li></ul><p><strong>Preferred Industry:</strong> Ports, Bulk Material Handling, Mining, Cement, Steel, Power Plant or Heavy Industrial Maintenance.</p>

<p>Responsible for the design, operation, and optimization of the industrial network and SCADA communication infrastructure supporting wastewater treatment plants, pumping stations, reservoirs, and remote assets. Ensures high availability, redundancy, secure connectivity, and continuous data flow across all control system components.</p><p><b><br></b></p><p><b>Key Responsibilities:</b></p><ul><li>Design and maintain SCADA network architecture for wastewater facilities and remote pumping stations.</li><li>Configure and manage industrial switches, routers, fiber networks, and communication links.</li><li>Implement and maintain network redundancy and failover mechanisms.</li><li>Monitor network performance, availability, and fault diagnostics.</li><li>Support SCADA data communication between PLCs, RTUs, and control room systems.</li><li>Coordinate with cybersecurity team on network segmentation and secure architecture.</li><li>Support disaster recovery and business continuity planning.</li><li>Participate in FAT/SAT, commissioning, and system upgrades.</li><li>Perform any other duties assigned by NDS Management as required.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum Qualifications &amp; Experience:</p><ul><li>Bachelor s degree in Electrical Engineering, Control Systems, Computer Engineering, or related field.</li><li>Minimum 10 years of experience in SCADA / ICS environments, preferably in water or wastewater utilities.</li><li>Proven experience in managing industrial Ethernet networks (Layer 2/3).</li><li>Strong knowledge of:<ul><li>VLANs, RSTP/MSTP, routing fundamentals</li><li>SNMP configuration and network monitoring</li><li>Industrial communication protocols (Modbus TCP/IP, DNP3, IEC 60870-5-104, etc.)</li></ul></li><li>Hands-on experience in designing redundancy and high-availability architectures.</li></ul><p>Preferred Certifications:</p><ul><li>CCNA / CCNP (or industrial networking equivalent)</li><li>Vendor SCADA/network certification (e.g., Siemens, Schneider, GE)</li><li>ITIL Foundation (optional)</li></ul>

<p>Manage instrumentation and control activities across the DRI Plant. Support installation, testing, commissioning, start-up, and maintenance activities. Review P&amp;IDs, instrumentation datasheets, control system architecture, and technical drawings. Support FAT, SAT, testing, and performance verification activities. Monitor and troubleshoot DCS, PLC, SIS/ESD, and SCADA systems. Coordinate with technology licensors, vendors, EPC contractors, and internal teams. Support preventive and corrective maintenance activities. Lead and support instrumentation engineers, supervisors, and technicians. Ensure compliance with applicable HSE and technical standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s Degree in Instrumentation, Electronics, Electrical &amp; Instrumentation Engineering, or a related discipline with 10 15 years of relevant experience; OR Diploma in Instrumentation Engineering with 12 18 years of relevant experience. Minimum 8 years of experience with MIDREX or HYL/ENERGIRON technology. Strong knowledge of DCS and PLC systems. Experience with SIS/ESD, SCADA, and industrial control systems. Exposure to Siemens PCS 7 is highly preferred. Knowledge of SAP PM/MM, HART, Modbus, HAZOP, and SIL is an advantage. Strong commissioning, start-up, maintenance, and troubleshooting experience. Good English communication skills.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a <strong>Lead Telecom Engineer</strong> to join its Projects team focusing on delivering across FEED and Detail design scopes of work. In this role, you will be responsible to Plan, implement and manage FEED Office projects and assist IM&amp;T (Applications, Telecoms, Computing and Information Management) projects for within scope, cost and time<br> Position is based in Muscat, Oman .</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Lead QAQC Engineer to be seconded to the client office.<br> Position is based in Musandam, Oman for a long-term assignment.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>SCMS &amp; Cybersecurity Commissioning Engineer- Muscat, Oman Siemens strongly believes in the value of a Digital Portfolio, hence Smart Infrastructure combines Digital Power Distribution and Digital Building Infrastructure technologies. Our Digital Portfolio will enable our customers to enjoy occupant’s intuitive buildings which are comfortable, safe, secure and energy efficient. Smart infrastructure from Siemens intelligently connects energy systems, buildings and industries to adapt and evolve the way we live and work. We work together with customers and partners to build an ecosystem that intuitively responds to the needs of people and helps customers to better use resources. It helps our customers to thrive, communities to progress and supports sustainable development. Join our Smart Infrastructure Customer Services Team as the SCMS and Cybersecurity Commissioning Engineer and help us re-imagine the world by finding solutions and making the world a smarter place for tomorrow. Key Responsibilities Your Role – International, Challenging and Future-Oriented! In this role you will be performing commissioning of SCMS and Cybersecurity Systems in the Middle East based in Oman. While being part of the team, you will also be involved in the latest solutions on IOT, Cyber Security, Process Bus, etc. General Responsibilities: Configure and test Bay Control Units (BCUs), RTUs/PLCs, SCMS systems Develop new application solutions with IEC61850, Modbus, Profibus, IEC 101, IEC 104 or other communication protocols relevant in the energy automation field Design, configure, conduct FAT and commissioning of Cybersecurity for Substation Automation systems Be one of our primary customer interfaces, including trouble shooting and commissioning support Occasionally assist in developing new order proposals (bills of materials, clarifying technical comments, etc.) Design, development, implementation, testing, and commissioning of protection and control applications and schemes Prepare (SAT) Site Acceptance Test procedures. Configure, test and perform commissioning SCMS for retrofit applications. Travel to job sites, customer offices and vendors factories expected to be around 75% of total time. Perform Training on the SCMS system to customers Your Qualifications and Skills – Digital and Solid! Expected degree qualification and/or major: Bachelor’s degree in electrical/Electronics/Instrumentation Relevant year of experience: 3+ Years Knowledge of expertise: Advanced knowledge of substation network topology design; Ring/Star with redundancy protocol RSTP, PRP &amp; HSR etc. Practical knowledge of large 61850 network design, Human-Machine Interface / SCADA Parameterization including implementation of Substation Automation and Cyber Security Experience in parameterizing communication protocols, IEC61850, IEC 101, IEC 104 etc Hands-on experience in Configuring and testing BCUs with logics Configuring HMIs with SLDs, Alarms, Events, Trends, etc Configuring Gateways to convert various protocols Configuring, integration and troubleshooting of numerical devices and meters to SCMS/RTU systems Be on site to lead/participate in FAT and/or SAT and/or commissioning as required by the project Knowledge of Cybersecurity in OT Systems including configuration/parameterization of Next Gen Firewall IDS Syslog Server RBAC Hardening Awareness of IEC 62443 and IEC 62351 standards Any relevant certification: Will be an added Advantage Experience in utility or power transmission/distribution environments. Personal skills: Adaptability, problem-solving, cross-cultural collaboration, Language skills: English Considered a Plus – Not mandatory: The following experience is not mandatory; however, candidates who can demonstrate solid knowledge in these areas will be given extra consideration: Knowledge of Siemens relay/automation products and associated software Communication Network Technologies, including Design, Configuration, and troubleshooting Knowledge of ANSI standards, IEC standards. SICAM PAS SICAM SCC/WinCC SICAM A8000 RTU, SICAM 230 SCADA, SICAM AK3, Toolbox II DIGSI 4/5 Logic Building with (CAEx, ST, CFC etc) Knowledge of the multiple vendors' Numerical Relays products and associated software C, VB Programming Language experience. What else do you need to know? What else do you need to know? As a world leader in developing and producing the most advanced engineering technologies, we improve lives and further human achievements worldwide, while also protecting the climate - all thanks to our employees. Working with us, you have the foundation to develop personally and professionally. We give you the chance to do something significant that benefits society and human progress. We give you the chance to create a difference. Diversity at Siemens is our source of creativity and innovation. Having different types of talent and experiences makes us more ambitious and better prepared to respond successfully to the demands of the Society. Therefore, we value the candidates that reflect the Diversity that we enjoy in our Company. Please find more information at www.siemens.com At Siemens we are always challenging ourselves to build a better future. We need the most innovative and diverse Digital Minds to develop tomorrow ‘s reality. Find out more about the Digital world of Siemens here: www.siemens.com/careers/digitalminds We are looking forward to receiving your online application. Please note: Only complete applications can be considered in the selection process.</span> </div>

<p>MEP ENGINEER Qualification -BE Electrical Experience - T otal 10 years with minimum 5 year GCC experience as an MEP Engineer GCC driving license -Preferred Leave &amp; Other entitlements -As per Omani Labour Law Age - Below 45 years Salary &amp; Benefits -Salary will be discussed and finalized based on Qualification, experience, skills and Interview assessment by client. In addition of salary company will provide free accommodation , Transportation, Medical GENERAL INFORMATION REQUIRED Please send all documents in following sequence of attachment. Kindly accord priority. Document Required to be sent with CV:- Updated CV Academic Certificate of Graduation and above Achievements/Awards during career growth/Licence (if any)/Permit copy/Any other approvals copy as required for job. Experience certificates Passport copy clear (Please attach your Passport last Visa cancelled page if you were present earlier with any employer of current hiring country) Recent Photograph Mobile number Your current Location If already in Gulf, how soon you can join Current Salary &amp; Salary Expectation In case you need any clarification pls send message on WhatsApp PHONE_NUMBER .</p><p><strong>Desired Candidate Profile</strong></p><p>BE Electrical</p> <p>Total 10 years with minimum 5 year GCC experience as an MEP Engineer</p> <p>GCC driving license -Preferred</p> <p>Age - Below 45 years</p>

<p>Relevant experience in 33 kV Overhead Line projects. Strong project execution and site management experience.</p><p><strong>Desired Candidate Profile</strong></p><p>Degree/Diploma in Electrical Engineering or relevant qualification. Power / Oil &amp; Gas experience is preferred.</p>

<p><strong>1 ) JOB DESCRIPTION SITE MANAGER (SCADA ENGINEER)</strong></p><p>Key Responsibilities:</p><p>Supervision: Coordinate and manage onsite Engineers, Technicians, and Sub-contractors.</p><p>Planning: Monitor project schedules, track milestones, and manage resource allocation.</p><p>Communication: Liaise with client engineers on site and contract manager regarding progress reports.</p><p>Tools &amp; Materials: Arrange and manage tools, equipment, and materials to ensure smooth execution of all site activities.</p><p>SCADA Design &amp; Implementation: SCADA configuration, including HMI graphics, dashboard design, history and alarm management.</p><p>Programming &amp; Configuration: Program RTUs and PLCs including I/O Mapping to monitor and control remote assets (Wells, Manifolds, Tanks, Solar Systems etc.).</p><p>Communication &amp; Protocols: Configure communication links (Radio, GSM/4G/5G) using industrial protocols like Modbus Serial/TCP, DNP3 etc.</p><p>System Compliance: Ensure all control systems comply with safety regulations and operational standards and report any safety/operational concerns to the Site Manager.</p><p>Documentation: Maintain accurate records of installation, maintenance, and configurations for RTU/SCADA.</p><p>HSSE Compliance: Ensure proper use of PPE at all times and comply with the necessary OPAL regulations for work in Oil &amp; Gas Environments.</p><p>Required Skills &amp; Qualifications:</p><p>Education: Bachelors degree in Electrical, Electronics, or Instrumentation Engineering.</p><p>Technical Expertise: Sound knowledge and hands-on experience with RTUs, PLCs and SCADA.</p><p>Protocols: Proficient in Industrial Communication Protocols such as Modbus &amp; TCP/IP, DNP3 etc.</p><p>E xperience: Minimum 7 - 8 years of experience in industrial automation, oil &amp; gas automation, or field service.</p><p>Compensation Gross Salary OMR 1,100/-</p><p>Work Schedule 3 Months Work at Site / 1 Month Leave</p><p>Air Ticket Every 3 Months (provided by company)</p><p>Food, Transport &amp; Accommodation at Site covered by Company</p><p>Location : Oman</p><p>Age : 30-35 Years</p><p><strong>2) JOB DESCRIPTION SITE SUPERVISOR (INSTRUMENT TECHNICIAN)</strong></p><p>Key Responsibilities</p><p>Supervision: Manage on-site instrumentation technicians, and daily installation &amp; maintenance activities.</p><p>Installation &amp; Calibration: Oversee setup and testing of flow meters, pressure transmitters, control valves, and safety systems.</p><p>Safety Compliance: Enforce Health, Safety, and Environment (HSE) rules, work permits, and Lockout/Tagout (LOTO) procedures.</p><p>Requirements and Qualifications</p><p>Education: Diploma in Instrumentation, Electrical Engineering, or a related field.</p><p>Experience: 5 to 6 years of industrial site experience, with supervisory roles in oil, gas, petrochemical, or energy sectors.</p><p>Technical Skills: Knowledge of process control loops, field instrumentation, and safety shutdown systems (ESD)</p><p>Driving: Oman Driving License is a must.</p><p>Compensation: Gross Salary OMR 425/-</p><p>Work Schedule 3 Months Work at Site / 1 Month Leave</p><p>Air Ticket Every 3 Months (provided by company)</p><p>Food, Transport &amp; Accommodation at Site covered by Company</p><p>Location : Oman</p><p>Age : 30-35 Years</p><p>Note : Service Charges are applicable.</p><p><strong>Desired Candidate Profile</strong></p><ul><li><strong>SITE MANAGER (SCADA ENGINEER)</strong></li><li>Education: Bachelors degree in Electrical, Electronics, or Instrumentation Engineering.</li><li>Technical Expertise: Sound knowledge and hands-on experience with RTUs, PLCs and SCADA.</li><li>Protocols: Proficient in Industrial Communication Protocols such as Modbus &amp; TCP/IP, DNP3 etc.</li><li>Experience: Minimum 7 - 8 years of experience in industrial automation, oil &amp; gas automation, or field service.</li><li>Age : 30-35 Years</li><li><strong>SITE SUPERVISOR (INSTRUMENT TECHNICIAN)</strong></li><li>Education: Diploma in Instrumentation, Electrical Engineering, or a related field.</li><li>Experience: 5 to 6 years of industrial site experience, with supervisory roles in oil, gas, petrochemical, or energy sectors.</li><li>Technical Skills: Knowledge of process control loops, field instrumentation, and safety shutdown systems (ESD)</li><li>Driving: Oman Driving License is a must.</li><li>Age : 30-35 Years</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Ingénieur-e CEM confirmé-e F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>La Direction Ingénierie Electronique Mécanique et Optique de Safran Electronics and Defense recherche un-e Ingénieur-e CEM confirmé-e. Intégré-e au sein du Pôle CEM d'Eragny, le ou la candidate aura à terme une position de référent-e et devra :<br>- Assurer la réponse à appel d'offre et le suivi technique des projets dont il-elle aura la responsabilité sur l'ensemble du cycle de développement et/ou de maintien en condition opérationnelle.<br>- Analyser et décliner les spécifications EMI/Foudre du Système dans le but de fournir les contraintes de conception CEM de nos équipements électroniques.<br>- Participer au développement des équipements intégrant de l'électronique afin d'assurer leur conformité aux exigences environnementales CEM de ces équipements.<br>- Spécifier les électroniques de protection et de filtrage.<br>- Suivre/Piloter les essais CEM.<br>- Effectuer les expertises et investigations techniques qui lui seront confiées.<br>- Rédiger les documents de justification dans le cadre des validations, qualifications et certifications.<br>- Développer, capitaliser et diffuser ses compétences techniques au sein de l'équipe.<br>- Piloter les travaux de R&amp;T qui lui seront confiés.<br>- Participer au développement des capacités de modélisation/simulation adaptées aux besoins opérationnels de l'équipe.<br>Le poste requiert une expérience démontrée dans le développement de systèmes électroniques avec des compétences techniques solides en Compatibilité Electromagnétique. Plus particulièrement des connaissances normatives aéronautiques civiles et militaires (DO-160, MIL-STD-461, AECTP,…), des connaissances en terme de techniques d'essais et de mesures ainsi que des connaissances fortes en modélisation/simulation électromagnétique (simulation circuit, lignes de transmission, full-wave).</p><br><br><p>Des déplacements occasionnels au niveau national sont à prévoir et encore plus ponctuellement au niveau international.</p><br><br><p>De formation minimum BAC+5, vous justifierez d'une expérience professionnelle supérieure à 5 ans dans le domaine de la compatibilité électromagnétique et les effets indirects de la foudre. Des compétences en électronique, gestion de projet et en ingénierie des systèmes serait un plus.<br>En terme de savoir-être :<br>- Vous possédez de bonnes compétences en communication.<br>- Vous faites preuve de curiosité, d'autonomie et de dynamisme.<br>- Vous avez de bonnes capacités de travail en équipe.<br>- Vous êtes capable de travailler efficacement et de manière proactive avec d'autres équipes.<br>- Vous savez tenir les jalons dans un contexte multi-projet avec une bonne gestion des priorités.<br>- Vous avez des bonnes compétence en rédaction/revue de documentation technique.</p><br><br><br> </div>

<p>Develop novel state-of-the-art vision algorithms and corresponding systems, leveraging deep learning techniques. Research, develop and prototype advanced computer vision technologies and integration with hardware edge processors. Develop high-quality computer vision algorithms for localization, object detection, classification, and video analysis. Translate algorithms into production-level code. Contribute to a large code base in Python for deploying these models in production environments. Implement best practices for data collection, preprocessing, feature engineering, and model training, and ensure that the team follows these practices consistently Conduct regular code reviews and provide technical guidance and feedback to team members, ensuring that they produce high-quality code that is efficient, scalable, and maintainable. Interface with the Product/Project manager to develop R&amp;D plans, proposals, intellectual property filings, commercialization strategies and other material that facilitate the innovation process. Collaborate with Product/Project managers in maintaining a roadmap for the team's AI projects, including identifying key milestones, timelines, and resource requirements. Collaborate with team members to develop, test, deploy, and maintain software/AI systems while being actively involved in product backlog grooming, sprint planning, execution, review, and retrospectives. Work with IT, software and security teams to deploy production grade AI solutions that comply with relevant data privacy and security regulations. Collaborate with subject matter experts to understand their business needs and develop ML solutions that meet their requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Qualifications Bachelor s degree in AI, Remote Sensing, Survey, Engineering, or any other related fields Minimum Experience: Preferably 1-3 years experience in the same field Job-Specific Knowledge &amp; Skills: Experience developing machine learning models and neural network-based computer vision models. Experience deploying production grade ML and vision systems on the edge for real-time applications. Python Knowledge. Strong software engineering skills. Strong ability to present work and communicate ideas to technical and non-technical coworkers. Experience with machine learning libraries such as Tensorflow, Keras, Sklearn and others. Experience using OpenCV. Experience with git and other such versioning tools. Experience with DevOps cloud tools (AWS, Google Cloud etc.). Experience with NVIDIA Triton inference server will be plus Experience with MLOps tools such as Kubeflow will be a plus. Experience with web development frameworks (e.g Flask, Django) will be a plus Experience handling a large code base in python will be a plus. Experience developing computer vision algorithms for anomaly detection will be a plus. Fluency in English.</p>