وظائف مهندس تخطيط في سلطنة عمان

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Deliver pipeline engineering design across Project Delivery under the Mechanical Engineering Manager, covering Concept, Pre-FEED, FEED, Detailed Design, and EPC phases for cross-country and in-plant pipeline systems. The role ensures safe, optimized, and fit-for-purpose designs in full compliance with OQEP standards, asset requirements, and international codes.</p><p>Act as the technical authority for pipeline engineering, ensuring technical integrity of all deliverables and providing expert input to key design decisions across the project lifecycle. The position supports complex pipeline systems, including large-diameter and long-distance networks and interfaces closely with Field Urban planning, Projects, procurement, construction, commissioning, operation and integrity teams to ensure design intent is maintained through to project closeout.</p><p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><ul><li>Execute pipeline engineering design across Concept, Pre-FEED, FEED, Detailed Design, and EPC phases, ensuring alignment with project scope, schedule, and technical requirements.</li><li>Lead and coordinate pipeline engineering activities, ensuring timely and high-quality delivery of all design outputs.</li><li>Act as technical authority in pipeline engineering, providing guidance on design decisions, standards application, and resolving complex technical issues.</li><li>Ensure the engineering deliverables generated by Contractor meet project requirement in term of technical content and follow project procedures such as engineering plan, quality plan, document numbering, level of approval,</li><li>Develop and review key deliverables including pipeline layouts, plot plans, GA drawings, alignment sheets, isometrics, hydrotest diagrams, HDD profiles, crossing drawings, and station approach drawings.</li><li>Prepare and review Pipeline Design Basis, Stress Analysis Philosophy, stress analysis report, route selection reports and all related design calculations including wall thickness, Road crossing and upheaval buckling calculations.</li><li>Perform and review pipeline routing, alignment optimization, and feasibility studies including constructability and cost considerations.</li><li>Ensure compliance with Company design specifications, international design codes and standards including ASME B31.4, B31.8, B31.3, API, ISO, ASTM standards, and other applicable codes.</li><li>Design and review pipelines across various materials including Carbon Steel (CS), DSS, GRE, HDPE, PE-lined systems, and LLRTP.</li><li>Prepare material specifications, datasheets, RFQs, and support technical bid evaluations (TBE) and vendor document reviews (VDR) for all pipeline and piping items</li><li>Review and Develop construction specifications, scope of work for pipeline Engineering, route surveys, and interfaces</li><li>Coordinate with vendors, and multidisciplinary teams to ensure design compliance and alignment with project requirements.</li><li>Analyze pipeline engineering deliverables and actively participate in design reviews, HAZOPs, and technical workshops.</li><li>Identify and resolve technical challenges during FEED and detailed design, including urban planning studies and system modifications/upgrades.</li><li>Support end-to-end project execution including design engineering, resource planning, cost estimation, and activity Phasing.</li><li>Support urban planning, projects, procurement, construction, commissioning, operation and intergrity teams by providing technical clarifications and resolving site queries.</li><li>Conduct or support site visits, inspections, and mechanical walk-downs to ensure design accuracy and implementation compliance.</li><li>Identify gaps in standards, tools, and practices, and contribute to continuous improvement initiatives.</li><li>Ensure adherence to QHSE requirements and promote a strong safety culture across all engineering activities.</li><li>Report safety concerns or deviations and ensure compliance with company procedures.</li><li>Mentor and develop junior pipeline engineers by providing technical guidance, reviewing their work, and supporting their progression in design practices, standards, and tools.</li><li>Perform other related duties as required.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Projects, Operation, Integrity</li><li>External: Consultants, Contractors, Vendors</li></ul><p><strong>Notable Working Conditions.</strong> office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>The minimum qualification is a Bachelor s degree in Mechanical Engineering, or related.</p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p>Lead Engineer Bachelor 8+ years of relevant experience</p><p>Both:</p><p>Pipeline experience in similar projects is mandatory.</p><p>Pipeline offshore experience is favorable.</p><p>On plot piping experience is favorable.</p><p>Soft:</p><p>To work collaboratively with all involved.</p><p>Adaptable and motivated general management strategist who relishes challenges</p><p>Excellent interpersonal skills and multi-cultural sensitivity.</p><p>Technical:</p><p>Computer literate with expertise in MS Office.</p><p>Experienced in resource control, contract management and general management.</p><p>AutoCad, Naviswork</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Bachelor’s degree in civil engineering is mandatory.<br>&nbsp;Minimum 10&nbsp;years of experience as Planning Engineer, with at least 5 years of experience in Middle East.<br>Strong knowledge of road construction methods and project planning.<br>Strong leadership, communication, and problem-solving skills.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor’s degree in civil engineering is mandatory. &nbsp;Minimum 10&nbsp;years of experience as Planning Engineer, with at least 5 years of experience in Middle East. Strong knowledge of road construction methods and project planning. Strong leadership, communication, and problem-solving skills.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Testing &amp; Commissioning Roles &amp; Responsibilities</p><br><p>The T&amp;C engineer is responsible for planning test procedures, coordinating with construction teams, verifying equipment installation, and conducting functional and performance tests. Supervisors assist in site inspections, documentation, and ensuring safety compliance. Technicians execute testing activities, record readings, and report abnormalities. Quality and safety teams ensure adherence to regulations and risk control measures. Proper documentation, reporting, and handover to the client are key responsibilities, ensuring the system is reliable, efficient, and ready for operation.</p><br><p>From Basic Cable schedule preparation, LVAC &amp; LVDC Commissioning, GIS &amp; CRP Interlock, Scheme Tests,</p><br><p>Auxiliary Relay Test, Back up Relay Test &amp; Remote End modification works etc</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector. Job Title: Project Engineer Reports To: Project Manager / Engineering Manager Job Details Number of Vacancies: 1 Position Salary Range: OMR PHONE_NUMBER per month Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate) Job Purpose The Project Engineer is responsible for planning, coordinating, and executing engineering projects to ensure they are completed safely, on time, within budget, and in accordance with technical specifications and quality standards.</p><p>Key Responsibilities Assist in the planning, scheduling, and execution of engineering and technical projects. Coordinate project activities with internal departments, contractors, consultants, and vendors. Monitor project progress and ensure compliance with project schedules, budgets, and technical requirements. Prepare project documentation, reports, specifications, drawings, and progress updates. Review engineering designs, technical documents, and project deliverables. Support procurement activities by reviewing technical specifications and evaluating vendor proposals. Conduct site inspections and supervise project implementation activities. Identify project risks and support the development of mitigation plans. Ensure compliance with company policies, safety regulations, quality standards, and industry best practices. Participate in project meetings and provide technical recommendations and solutions. Assist with project testing, commissioning, handover, and closeout activities. Maintain accurate project records and documentation throughout the project lifecycle.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Bachelor s Degree in Engineering (Civil, Mechanical, Electrical, Electronics, Telecommunications, Industrial, or related engineering discipline).</p><h2>Experience</h2><p>Practical Experience: 0 (No prior work experience required) Internship or academic project experience in engineering or project coordination is an advantage.</p><h2>Technical Skills</h2><p>Basic knowledge of project management principles and methodologies. Familiarity with project planning tools such as Microsoft Project or Primavera. Understanding of engineering drawings, specifications, and technical documents. Basic knowledge of budgeting, cost control, risk management, and project reporting. Awareness of engineering standards, quality systems, and safety regulations. Proficiency in Microsoft Office applications.</p><h2>Soft Skills</h2><p>Strong analytical and problem-solving skills. Good communication and interpersonal abilities. Willingness to learn and develop professionally. Ability to manage multiple tasks and meet deadlines. Strong teamwork and coordination skills. Attention to detail and commitment to quality.</p><h2>Working Conditions</h2><p>Office and site-based work environments. May require travel to project sites and participation in inspections, meetings, and commissioning activities.</p><h2>Application Note</h2><p>The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age The closing date is 3rd August 2026.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong>Reporting to :</strong> Director of Exploration Planning and Chief Exploration Officer</p> <p> </p> <p> <strong>Role Objective:</strong> </p> <p>Due to the growing number of pipeline projects, MDO is seeking Principal Mining Engineer to lead Technical Studies to own and drive the technical study process and to bridge between the Exploration, Business Development (BD) and Project Development (PD) teams in advancing projects through successive stages of maturity.</p> <p>As a suitably qualified and experienced Principal Mining Engineer reporting to the Director of Exploration Planning and Chief Exploration Officer, you will initiate, scope, lead and quality-assure multidisciplinary technical studies across the portfolio, integrating geology, mining, metallurgy and processing, infrastructure, environmental and economic inputs into investment-ready deliverables. You will manage external consultants and contractors, govern study quality against stage-gate criteria, and support the BD and PD teams through the full project lifecycle (scoping, pre-feasibility, feasibility, project assessment, remediation, and decommissioning/closure). Regular site visits and close coordination with a range of consultants will be required.</p> <p> </p> <p> <strong>Duties and Responsibilities:</strong> </p> <p>1. Initiating, scoping, leading and coordinating scoping, pre-feasibility and feasibility studies across the project pipeline, working with the BD &amp; PD teams and external consultants</p> <p>2. Defining study scope, work breakdown, schedules, budgets and stage-gate deliverables, and governing study progress and quality against agreed criteria</p> <p>3. Integrating multidisciplinary inputs (geology, mining, metallurgy and processing, infrastructure, environmental and social, and economics) into coherent, decision-ready study outputs</p> <p>4. Selecting, managing and quality-assuring external consultants and contractors engaged in study work</p> <p>5. Leading technical-economic evaluation, including capital and operating cost estimation, cash flow modelling and NPV/IRR analysis, together with trade-off and options studies</p> <p>6. Reviewing and challenging advanced exploration projects by working closely with the Resource and Project Geologists to confirm study-readiness</p> <p>7. Directing and reviewing short-, medium- and long-term mine design, LOM planning and scheduling produced in-house or by consultants</p> <p>8. Providing technical support to the BD &amp; PD teams through project execution phases, including M&amp;A, due diligence and JV technical reviews</p> <p>9. Reporting and presenting study outcomes and recommendations to management and investment decision forums</p> <p>10. May be assigned to coordinate special or ad hoc projects as needed.</p> <p> </p> <p> <strong>Education: </strong> </p> <p> Bachelor s degree in mining engineering and/or a related technical discipline (e.g. geology, metallurgy, mineral processing). A postgraduate qualification or MBA will be an added advantage.</p> <p> <strong>Experience:</strong> </p> <p> Minimum 10 years overall experience across mining studies and projects, spanning multiple commodities including base and precious metals, chromite, and industrial minerals (dolomite, gypsum, silica, limestone), with several years in a study management or technical lead capacity</p> <p> Initiating, leading and delivering technical studies (scoping, pre-feasibility and feasibility) through formal stage-gate processes</p> <p> Managing multidisciplinary study teams and external consultants from concept through to feasibility and execution</p> <p> Directing mine design, LOM planning and scheduling for both open pit and underground projects</p> <p> Leading project budgeting and technical-economic evaluation (feasibility studies, cash flow analysis, NPV &amp; IRR).</p> <p> </p> <p> <strong>Special Skills &amp; Knowledge:</strong> </p> <p> Leading technical studies, trade-off studies, cost estimation and project evaluation through stage-gate decision processes.</p> <p> Knowledge of a broad range of planning, operations and study-management practices.</p> <p> Sound technical grounding across mining methods, mine engineering and the principal study disciplines (geology, processing, infrastructure, environmental and economics).</p> <p> Good understanding of Mineral Resource and Ore Reserve estimation and reporting.</p> <p> Ability to direct and review work produced in mine planning software packages.</p> <p> Knowledge of mine capital and operating cost estimation and economic modelling.</p> <p> Strong stakeholder management, with experience in and / or an inclination for business development.</p> <p> Working familiarity with mining software such as Deswik, Micromine, Minesight and Vulcan, sufficient to scope, review and quality-assure outputs including stope and schedule optimization.</p> <p> Experience in due diligence activities and auditing.</p> <p> NI 43-101 and JORC technical reporting.</p> <p> </p> <p> <strong>ADDITIONAL QUALIFICATION /CERTIFICATION REQUIRED:</strong> </p> <p> Competent or Qualified Person status (e.g. AusIMM, AIG or equivalent recognised under JORC / NI 43-101) is desirable.</p> <p> </p> <p> </p> <p> </p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wet Utilities Design Engineer will be responsible for designing water supply, firefighting, irrigation, stormwater, and wastewater networks in accordance with Oman authority standards. The role requires strong technical skills in hydraulic design, preparation of construction documentation, and coordination with multidisciplinary teams. This position is ideal for an engineer with around 5 years of experience in wet utilities design for infrastructure or development projects.</p><p>Prepare detailed designs for water supply, TSE/irrigation, wastewater, and stormwater networks in line with Oman authority regulations. Develop hydraulic calculations, pipe sizing, network modeling, and design layouts using relevant engineering software. Prepare drawings, design reports, BOQs, technical notes, and specifications for tender and construction phases. Coordinate with civil, structural, and other engineering disciplines to ensure seamless integration of wet utility systems. Review topographical surveys, hydrological studies, and geotechnical data to inform design decisions. Conduct wet utility network modeling (e.g., EPANET, WaterCAD, SewerCAD, StormCAD or equivalent). Liaise with Oman authorities (e.g., PAEW/MADAYN/Municipality) for design submissions, approvals, and technical clarifications. Perform site visits to gather design inputs and verify existing utility conditions. Support senior engineers in value engineering, design validation, and optimization efforts. Respond to technical queries from contractors, clients, and project stakeholders during construction or permitting stages.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in Civil Engineering, Environmental Engineering, or a related field. Minimum 5 years of experience in wet utilities design, preferably within infrastructure or urban development projects. Strong understanding of Oman authority standards for water supply, sewerage, stormwater, and irrigation systems. Proficiency in design and modeling tools such as AutoCAD, Civil 3D, WaterCAD, SewerCAD, StormCAD, EPANET, or similar. Good understanding of hydraulic principles, pipe material specifications, manhole design, and pumping system basics. Experience preparing design documentation, reports, and BOQs. Strong communication and coordination skills with multidisciplinary teams. GCC experience and a valid driving license are advantageous. Professional memberships or relevant certifications are a plus.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p><strong>Job Title:</strong> Site Engineer</p><p><strong>Reports To:</strong> Project Manager / Construction Manager</p><p><strong>Job Details</strong></p><p>Number of Vacancies: 9</p><p>Position Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p><strong>Job Purpose</strong></p><p>The Site Engineer is responsible for planning, coordinating, and executing engineering projects to ensure they are completed safely, on time, within budget, and in accordance with technical specifications and quality standards.</p><p><strong>Key Responsibilities</strong></p><ul><li>Assist in the planning, scheduling, and execution of engineering and technical projects.</li><li>Coordinate project activities with internal departments, contractors, consultants, and vendors.</li><li>Monitor project progress and ensure compliance with project schedules, budgets, and technical requirements.</li><li>Prepare project documentation, reports, specifications, drawings, and progress updates.</li><li>Review engineering designs, technical documents, and project deliverables.</li><li>Support procurement activities by reviewing technical specifications and evaluating vendor proposals.</li><li>Conduct site inspections and supervise project implementation activities.</li><li>Identify project risks and support the development of mitigation plans.</li><li>Ensure compliance with company policies, safety regulations, quality standards, and industry best practices.</li><li>Participate in project meetings and provide technical recommendations and solutions.</li><li>Assist with project testing, commissioning, handover, and closeout activities.</li><li>Maintain accurate project records and documentation throughout the project lifecycle.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Bachelor s Degree in Engineering (Civil, Mechanical, Electrical, Electronics, Telecommunications, Industrial, or related engineering discipline).</p><h2>Experience</h2><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic project experience in engineering or project coordination is an advantage.</p><h2>Technical Skills</h2><ul><li>Basic knowledge of project management principles and methodologies.</li><li>Familiarity with project planning tools such as Microsoft Project or Primavera.</li><li>Understanding of engineering drawings, specifications, and technical documents.</li><li>Basic knowledge of budgeting, cost control, risk management, and project reporting.</li><li>Awareness of engineering standards, quality systems, and safety regulations.</li><li>Proficiency in Microsoft Office applications.</li></ul><h2>Soft Skills</h2><ul><li>Strong analytical and problem-solving skills.</li><li>Good communication and interpersonal abilities.</li><li>Willingness to learn and develop professionally.</li><li>Ability to manage multiple tasks and meet deadlines.</li><li>Strong teamwork and coordination skills.</li><li>Attention to detail and commitment to quality.</li></ul><h2>Working Conditions</h2><p>Office and site-based work environments. May require travel to project sites and participation in inspections, meetings, and commissioning activities.</p><h2>Application Note</h2><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Logistics &amp; Materials Engineer Grade Stream Upstream E&amp;P Function Well Delivery Department Operated Asset Location Oman Muscat Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Well Delivery Support Manager Direct Reports - Job purpose The Materials &amp; Logistics Engineer is responsible for planning, coordinating, and controlling materials and logistics activities to ensure that all required materials are available on time, meet technical and quality requirements, and support project schedules. The role supports drilling, workover, and well intervention operations by working closely with engineering, procurement, vendors, logistics providers, and site teams to ensure smooth project execution. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main tasks and responsibilities Review material requisitions and technical specifications to ensure compliance with company and project standards. Coordinate with drilling and engineering teams to address technical queries, material substitutions, and deviations. Ensure materials are procured, stored, and handled according to approved specifications, procedures, and industry standards. Maintain accurate material traceability, certifications, and documentation throughout the supply chain. Support the technical evaluation of vendors and materials when required. Review scopes of work related to materials, inspection, transportation, and quality control to ensure alignment with oil and gas industry best practices. Coordinate material receiving, inspection, storage, preservation, and issuance activities. Plan and manage inbound and outbound logistics, including transportation, shipping, and customs clearance, in line with OPAL standards. Ensure timely delivery of materials to warehouses, yards, and project sites according to project schedules. Monitor inventory levels and support stock optimization to prevent shortages or excess materials. Ensure proper identification, tagging, and preservation of materials to avoid damage or deterioration. Support periodic inventory audits and reconciliation processes. Interface with procurement, contracts, QA/QC, drilling, construction, and operations teams. Prepare and provide materials and logistics status reports to project management. Support expediting activities to ensure vendors and logistics providers meet agreed milestones. Participate in project planning and coordination meetings related to materials and logistics. Coordinate with well delivery team members to identify critical materials that must be prioritized for transportation. Ensure all activities comply with company supply chain policies, HSSE requirements, and quality management systems. Identify opportunities to improve logistics efficiency, material handling processes, and cost effectiveness. Ensure hazardous and non-hazardous materials are correctly labeled, packaged, and returned to base in accordance with environmental regulations. Contribute to lessons learned and continuous improvement initiatives. Use materials management and inventory systems to track material orders, consumption, and stock levels in real time. Key interactions Internal: Upstream External : Notable Working Conditions. Office environment, intensive computer screen use, sporadic visits to operation site, traveling, when possible and needed.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education requirements Minimum qualification is a bachelor s degree in mechanical engineering or equivalent. Language Excellent knowledge of written, read, and spoken English (required) Background and experience Competencies and skills 5+ years relevant experience in similar role Understanding of materials management and drilling procedures. Working knowledge of Microsoft, Excel, Power Point, Word and materials/logistics management software Soft: Attention to detail and high level of accuracy. Able to lead discussions credibly and effectively negotiate resolutions. Previous experience working with a diversified workforce, with good people skills Highly organized, detail-oriented and able to work independently. Strong Communication skills and coordination skills (including verbal and written). Analytical and problem solving skills. Technical: Very good knowledge in using material management software. Excellent business and technical report writing skills Deep working understanding of material management and operations Planning and Reporting skills.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Support to oversee the integrity and consistency of technical compliance among new and existing assets by conducting technical audits.</p></li><li><p>Support to provide techno-commercial inputs for preparation of Strategic Plans to forecast the sewage volumes &amp; categories for urban development requirements/needs, as well as to analyses &amp; recommend the suitable technologies / methods for the collection, treatment &amp; re-use of treated products of wastewater/sewage align to the company’s business model</p></li><li><p>Provide inputs related to Process Engineering to develop project design documents including detailing the Terms of Reference (TOR) and basic project design to ensure an optimized design and suitable materials, compliant with safety codes, as applicable.</p></li><li><p>Supervise inspections of plant / materials/ equipment at factory and on post installation and document the findings to ensure that the materials installed meets the requisite specifications and identify causes of problems/defects, if any.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>BE/BSc in Process/ Chemical/ Environmental Engineering or Equivalent.</p></li><li><p>Overall (12) year’s total experience, (8) years’ experience in the Water/Wastewater Industry.</p></li><li><p>Experience in writing technical documents/reports/specifications.</p></li><li><p>Experience of Process design of water and wastewater systems.</p></li><li><p>Fluent speaking and writing of English language.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Provide detailed engineering input during all design phases, including interpretation and challenge of standards. Actively communicate with other disciplines to optimise areas of interface, during the design development, review and check processes. </p></li><li><p>Support design/drawing office personnel with specialist engineering input. </p></li><li><p>Prepare requisitions and technical evaluation of bids for discipline material and equipment sourcing. </p></li><li><p>Ensure equipment Vendors provide timely and quality input into design packages. Review all third-party discipline design work. </p></li><li><p>Ensure design packages meet the relevant safety, environmental and ergonomic standards.</p></li><li><p>Understand the contract quality management system and ensure these requirements are met.</p></li><li><p>Participate in and sometimes lead, discipline design reviews. </p></li><li><p>Conversant with relevant international standards. </p></li><li><p>Experience with Company and/or Shell Group projects and standards (SPs) is strongly preferred.</p></li><li><p>Field experience in construction &amp; commissioning strongly preferred.</p></li><li><p>Experience with Company and/or Shell Group projects and standards (SPs) is strongly preferred</p></li><li><p>Responsible for all day to day activities supporting build program planning and delivery; identifying key issues, constraints &amp; critical path; setting and achieving key milestones; issuing various reports</p></li><li><p>Execute technical support studies as requested.</p></li><li><p>Provide engineering support to Construction and operations as requested.</p></li></ul><p><br></p><p><strong>Other tasks:</strong></p><ol type="1"><li><p>Promoting Group Values, Code of Conduct and associated policies</p></li><li><p>Participating and providing positive contribution to technical, commercial, planning, safety and quality performance of the organization and in accordance with Client, Contractual, regulatory requirements</p></li><li><p>Undertaking any other responsibilities as directed and mutually agreed with the Line Management.</p><p><br></p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Mechanical or Civil engineering discipline.</p></li><li><p>For Engineers, a minimum 8 years oil &amp; gas engineering experience</p></li><li><p>Must be PC literate.</p></li><li><p>Shall demonstrate sound general management skills in all aspects of the work, be extremely well organised, methodical.</p></li><li><p>Good interpersonal &amp; communication skills and an extrovert. </p></li><li><p>Shall be able to form, smoothly interact and motivate a team within a matrix type organisation.</p></li></ul><p><br><br></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: HSE Engineer (Health, Safety &amp; Environment Engineer)</p><p>Reports To: HSE Manager / Operations Manager</p><p>Job Details</p><p>Number of Vacancies: 3 Positions</p><p>Salary Range: OMR [REDACTED] per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The HSE Engineer is responsible for ensuring a safe working environment by developing, implementing, and monitoring health, safety, and environmental policies and procedures. The role focuses on risk reduction, regulatory compliance, and promoting a strong safety culture across all operations.</p><p>Key Responsibilities</p><ul><li>Develop, implement, and maintain HSE policies, procedures, and safety programs.</li><li>Conduct risk assessments, hazard identification, and job safety analyses (JSA).</li><li>Monitor workplace activities to ensure compliance with safety and environmental regulations.</li><li>Conduct safety inspections, audits, and site walkthroughs.</li><li>Investigate incidents, accidents, and near-misses, and prepare detailed reports with corrective actions.</li><li>Ensure compliance with local regulations and international safety standards.</li><li>Deliver safety training, toolbox talks, and awareness programs for employees and contractors.</li><li>Maintain HSE documentation, records, and reporting systems.</li><li>Support emergency response planning, drills, and preparedness activities.</li><li>Monitor environmental performance and ensure proper waste management and pollution control practices.</li><li>Coordinate with operations, maintenance, and project teams to ensure safe work practices.</li><li>Recommend improvements to reduce risks and improve workplace safety culture.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Qualifications</b><br>Bachelor s Degree in Environmental Engineering, Safety Engineering, Occupational Health &amp; Safety, Chemical Engineering, or a related field.<br><b>Experience</b><br>Practical Experience: 0 (No prior work experience required)<br>Internship or academic experience in HSE or safety-related activities is an advantage.<br><b>Technical Skills</b><br>Basic understanding of HSE management systems (ISO 45001, ISO 14001).<br>Awareness of risk assessment and safety procedures.<br>Basic knowledge of incident reporting and investigation methods.<br>Ability to assist in safety inspections and training activities.<br>Understanding of environmental compliance concepts.<br>Basic proficiency in Microsoft Office and reporting tools.<br><b>Soft Skills</b><br>Strong willingness to learn and develop professionally.<br>Good communication and teamwork abilities.<br>Strong attention to detail.<br>Ability to follow procedures and work under supervision.<br>Basic problem-solving mindset.<br><b>Working Conditions</b><br>Office, field, and site-based environments. May require site inspections and participation in safety drills and emergency situations.<br><b>Application Note :</b><br>The applicant must be a job seeker.<br>The applicant must be an Omani national.<br>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.<br>The applicant must not have previously benefited from any training program funded by either the public or private sector.<br>The applicant must have no more than three (3) years of work experience.<br>The applicant must not be more than 38 years of age</p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provides strong technical engineering expertise pertaining Central Maintenance Planning &amp; Support Systems works, across RPI designated sites and all related operations, under TL Central Planning System &amp; Coordination scope s, as Technical Service provider of maintenance and execution of minor projects, modifications in accordance with the technical standards set by TSD to maintain the assets through; (1) Execute maintenance planning activities and shutdown to assets &amp; products, (2) Prepare reports and implementation plans / coordination for minor maintenance works in the designated areas, and (3) guide young engineers in Central Planning System &amp; Coordination matters; in order to ensure maximum availability of plant at all times, optimizing the cost, time &amp; resource utilization, minimizing the down time and meeting the operational targets that support the gross margin / profitability with a sufficient organizational capability for business continuity while identifying &amp; developing talent people to as feeder for OQ talent pipeline.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><p><strong>Role Scope</strong></p><p>Scope</p><p>RPI Assets Maintenance</p><p>Central Planning System &amp; Coordination</p><p>SAP maintenance model Owner</p><p>CMMS (SAP) PM master data and level of CMMS (SAP) usage</p><p>Safety and environmental compliance</p><p><strong>Accountabilities:</strong></p><p><strong>Planning &amp; Scheduling</strong></p><p>Provide input in development of maintenance strategies and plans, its administration, control, and availability of resources.</p><p>Maintenance focal point as SAP maintenance model Owner for assigned assets.</p><p>Arranges for planning/ preparations Shutdown related for jobs. Keep the packages ready in view of materials, resources &amp; other requirements to take-up the jobs in any opportunity.</p><p>Ensures that all temporary &amp; permanent solutions are being planned &amp; executed in coordination with execution teams for the Inspection generated work requests.</p><p><strong>Central Planning System &amp; Coordination</strong></p><p>Coordination with concerned discipline engineers to prepare detailed specifications, scope of work and ensure optimum use of resources.</p><p>Participation in identifying &amp; arranging maintenance works beyond in-house resources and need to be contracted out.</p><p>Leads daily maintenance planning meetings to discuss &amp; coordinate schedules, timing, and critical &amp; priority work, identifying manpower and equipment requirements.</p><p>Monitor &amp; guide planners to prepare maintenance plans, schedules with sufficient resources requirements for all maintenance activities.</p><p>Analyze the performance indicators and recommend solutions to catch-up for lagging areas.</p><p>Review job plans in the CMMS system giving job estimates showing sequence of steps, manpower requirements, man-hour requirements and any materials or equipment needed</p><p>Monitors and coordinate work executor s compliance to routine maintenance or SD planned.</p><p>Review &amp; adjusts planned maintenance schedules to maximize efficiency and discusses/resolves of actual time from schedule time.</p><p>Monitor the progress of the planned maintenance activities and update contractor s performance.</p><p>Conduct audit backlog, update estimates, and ensure maintenance orders are charged under correct WBS/ cost centres.</p><p>Proactively resolves issues during all phases of the schedule maintenance (including scope development &amp; start up to completion of shutdown/maintenance activities).</p><p>Involves in procurement process by preparation of detailed scope of works and liaising with contracts management &amp; execution teams.</p><p><strong>Stakeholder</strong></p><p>Collaborating with other teams and stakeholders, such as maintenance, engineering, procurement, and contractors.</p><p>Design the relevant contracts &amp; procurement of materials as per company strategy</p><p>Provide adequate contractor &amp; vendor management</p><p><strong>Regulatory &amp; Compliance</strong></p><p>Ensuring compliance with safety and environmental regulations, minimizing the risk of accidents and environmental incidents.</p><p>Ensuring that all relevant HSE aspects are incorporated in the scope work packs.</p><p>Implementation of lessons learned.</p><p>Ensure proper document &amp; data management to achieve an auditable process</p><p>Provide facilitation for external/ internal audits and follow-up of the maintenance function action items.</p><p><strong>Budget</strong></p><p>Developing maintenance budgets, ensuring that maintenance activities are cost-effective and align with the overall goals of the organization.</p><p>Analyse and monitor the progress &amp; budget status for capital projects.</p><p>Compilation of CAPEX &amp; OPEX budget, monitoring, and control.</p><p><strong>Reporting &amp; Continuous Improvements</strong></p><p>Leads in generating and preparation of reports and feedback regarding maintenance performance, compliance monitoring to implemented work processes.</p><p>Reviews the progress reports &amp; performance indicators and takes appropriate action and coordinates with concerned teams to catch-up for lagging areas.</p><p>Providing periodic reports regarding work status.</p><p>Maintenance backlog reports, analysis, and issuance of recommendation to the execution teams</p><p>Reporting the MOC under the maintenance function implementation</p><p><strong>Key interactions</strong></p><p>Internal: All Maintenance Managers &amp; Engineers, Planners, All Operations Managers, Procurement, Finance, People &amp; Culture, QHSE</p><p>External: Contractors, Vendors &amp; Suppliers</p><p>Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Qualification for this position is a bachelor s degree in mechanical / Electrical / Instrument Engineering or equivalent.</li><li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li><li>8+years of relevant experience</li><li>Relevant experience in similar role for Central Planning System (Oil &amp; Gas / Petrochemical or Refinery Plant experience preferred).</li><li>Engineering Planning System experience is a strong plus.</li><li>Good experience in Performance management for maintenance &amp; shutdown related jobs.</li><li>Knowledge of : Computerized Maintenance Management Systems (CMMS)</li><li>Expertise in SAP- PM, MM &amp; FM Module.</li><li>Primavera / Maximo / MS Project</li><li>Extensive experience in planning, scheduling of routine maintenance.</li><li>Sound judgment in technical matters with good skills in engineering field materials specifications and international standards.</li><li>Good experience in handling of Maintenance Contracts and shutdown related jobs.</li><li>Expertise for budgeting and cost control.</li><li>Good knowledge in Quality Assurance, Quality Control and HSE plans.</li><li>Familiar with techniques for ensuring data integrity with various integration of information/ reports</li><li>Knowledgeable in HSE plans related to maintenance activities.</li><li>Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals</li><li>Result oriented</li><li>Budget / Estimation</li><li>Good knowledge in Quality Assurance, Quality Control and HSE plans.</li><li>International Standards and applicable codes</li><li>Scheduling and Procurement process</li><li>Prior scheduling experience in a maintenance facility is a strong plus</li><li>Resources (internal and external) Cost Control</li><li>Knowledge in material specification, QA/QC, and international Codes &amp; standards</li><li>Ability to identify and resolve problems with appropriate resources</li><li>Must have excellent organizational skills and have a strong attention to detail.</li><li>Requires excellent communication skills, both verbal and written</li><li>Strong leadership skills as well as the ability to communicate across all levels.</li><li>Communication Skills (verbal / written)</li><li>SAP- PM Module. Primavera P6 / MSP, M/S Office.</li><li>Computerized Maintenance Management Systems (CMMS)</li><li>Computer problem solving skills,</li><li>Planning techniques, scheduling &amp; cost monitoring.</li><li>Knowledge in material specification, QA/QC, and international Codes &amp; standards.</li><li>Ability to schedule major shutdown projects</li><li>Ability to manage multiple priorities and perform multiple tasks simultaneously in a diversified and critical environment.</li><li>Data analysis and report writing skills</li><li>Ability to align the requirements of operations and maintenance</li><li>Able to build relationships within department staff and contractors with a focus on collaboration.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Purpose</p><p>The CMMS Engineer is responsible for managing, developing, and optimizing the Computerized Maintenance Management System (CMMS) to support effective maintenance planning, asset management, work order control, and equipment reliability across the organization.</p><p>Key Responsibilities</p><ul><li>Administer and maintain the CMMS platform to ensure accurate and efficient maintenance operations.</li><li>Create, update, and manage equipment master data, asset registers, and maintenance plans.</li><li>Generate and manage work orders, preventive maintenance schedules, and maintenance notifications.</li><li>Monitor maintenance activities and ensure timely completion of work orders.</li><li>Analyze maintenance data to identify trends, failures, and improvement opportunities.</li><li>Develop KPIs, dashboards, and performance reports related to maintenance activities.</li><li>Support maintenance planning and scheduling with operations and maintenance teams.</li><li>Ensure data accuracy, integrity, and consistency within the CMMS system.</li><li>Assist in system upgrades, configuration, testing, and implementation of improvements.</li><li>Provide training and technical support to CMMS users.</li><li>Coordinate with engineering, procurement, and maintenance teams for effective asset management.</li><li>Ensure compliance with company maintenance standards and asset management best practices.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications</strong></p><p>Bachelor s Degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, Computer Engineering, Information Technology, or related field.</p><p><strong>Experience</strong></p><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic exposure in maintenance systems or asset management is an advantage.</p><p><strong>Technical Skills</strong></p><ul><li>Basic knowledge of CMMS/EAM systems and maintenance workflows.</li><li>Understanding of preventive and corrective maintenance concepts.</li><li>Familiarity with data analysis and reporting tools.</li><li>Basic knowledge of asset management principles.</li><li>Awareness of industrial maintenance operations and equipment lifecycle.</li><li>Proficiency in Microsoft Excel and reporting tools.</li></ul><p><strong>Soft Skills</strong></p><ul><li>Strong willingness to learn and develop technical skills.</li><li>Good analytical and problem-solving abilities.</li><li>Strong attention to detail and data accuracy.</li><li>Good communication and teamwork skills.</li><li>Ability to manage tasks under supervision and meet deadlines.</li></ul><p><strong>Working Conditions</strong></p><p>Office-based with occasional site visits. May require support during maintenance shutdowns or system updates.</p><p><strong>Application Note</strong> :</p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Supervise the installation, testing, and commissioning of LV and ELV electrical systems for commercial building projects.</p></li><li><p>Review electrical shop drawings, method statements, technical submittals, and material approvals before execution.</p></li><li><p>Coordinate electrical works with MEP disciplines to ensure smooth project execution and resolve site clashes.</p></li><li><p>Monitor subcontractors to ensure compliance with project specifications, quality standards, and construction schedules.</p></li><li><p>Conduct site inspections and ensure all electrical installations comply with approved drawings, IEC standards, and local authority requirements.</p></li><li><p>Prepare RFIs, inspection requests, technical documentation, and project progress reports.</p></li><li><p>Coordinate with consultants, clients, and authorities to obtain approvals and resolve technical issues.</p></li><li><p>Oversee the installation of transformers, switchgear, generators, UPS, lighting, power distribution, and ELV systems.</p></li><li><p>Ensure compliance with QA/QC procedures, HSE requirements, and project specifications throughout construction activities.</p></li><li><p>Support project planning, progress monitoring, and successful project handover within budget and schedule.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's Degree in Electrical Engineering.</p></li><li><p>Minimum <strong>10 years</strong> of experience in electrical engineering within the commercial construction industry, including GCC experience.</p></li><li><p>Strong experience in LV and ELV systems, including power distribution, lighting, earthing, CCTV, BMS, Access Control, and Fire Alarm systems.</p></li><li><p>Proficiency in AutoCAD, Revit MEP, and electrical design principles such as load calculations and cable sizing.</p></li><li><p>Thorough knowledge of IEC, NFPA, Gulf standards, and local authority approval requirements.</p></li><li><p>Excellent coordination, communication, and project management skills with experience in commercial and hospitality projects.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What if you could shape a career as unique as you? At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons.</p><p>Project Engineer who will be responsible for managing SCADA activities for projects shall undertake the following actions:</p><p>Supervision the delivery and implementation of NEDC s SCADA system in accordance with the Company s license conditions . Adhere to the Company s health, safety, environmental and security policies at all times and immediately report violations of these policies to NEDC s health, safety &amp; environment representatives Oversee the design and implementation of the Company s SCADA s system project. Develop and implement the transition strategy of the new SCADA system to operations Ensure that correct and accurate policies and procedures are in place for the new SCADA system Trouble shoots complete SCADA System and Maintain all SCADA components. Recommends updates to the SCADA system, as required Configure RTU s, communication modems and other SCADA devices End-To-End testing procedures review, approval, inspections and testing supervision. Supervise technical staff as required Review and approval of Operation and Maintenance (O&amp;M) Manuals. Oversee the development, management and implementation of annual work programs and budgets for implementation of the new SCADA system consistent with the NEDC s business strategy and business planning process Develop, implement and report against staff training programs to improve technical and management skills Other duties, as assigned by client.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in electrical engineering or related field. Professional engineering license preferred. In-depth knowledge of electrical systems, codes, and standards. Proven experience in project management and team leadership.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>A Testing Engineer is required to fully test the product or system to ensure it functions properly and meets the business needs. As a Test Engineer you will be responsible for planning and implementing of tests that prove the functional and non-functional requirements of the system.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: Water Network Engineer</p><p>Reports To: Water Engineering Manager / Utilities Manager / Project Manager</p><p>Job Details</p><p>Number of Vacancies: 46 Positions</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The Water Network Engineer is responsible for supporting the design, operation, maintenance, and monitoring of water distribution networks. The role ensures efficient water supply systems, minimizes losses, and supports the planning and implementation of water infrastructure projects.</p><p>Key Responsibilities</p><ul><li>Assist in the design, operation, and maintenance of water distribution networks.</li><li>Monitor water network performance and identify leaks, losses, and inefficiencies.</li><li>Support planning and implementation of water infrastructure projects.</li><li>Prepare technical reports, drawings, and documentation related to water systems.</li><li>Conduct site inspections and field assessments of pipelines and network assets.</li><li>Coordinate with maintenance and operational teams to resolve network issues.</li><li>Support hydraulic analysis and system performance evaluation.</li><li>Ensure compliance with engineering standards and safety regulations.</li><li>Maintain accurate records of water network operations and maintenance activities.</li><li>Assist in improving efficiency and sustainability of water distribution systems.</li></ul><p>Qualifications</p><ul><li>Bachelor s Degree only in Water Engineering, Civil Engineering, Hydraulic Engineering, or a related field.</li></ul><p>Experience</p><p>Practical Experience: 0 years (Fresh graduates are welcome to apply.)</p><p>Technical Skills</p><ul><li>Basic understanding of water distribution systems and hydraulic principles.</li><li>Ability to read engineering drawings and technical specifications.</li><li>Familiarity with basic hydraulic analysis concepts.</li><li>Proficiency in Microsoft Office (Word, Excel, PowerPoint).</li><li>Knowledge of engineering software is an advantage.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and problem-solving skills.</li><li>Attention to detail and accuracy.</li><li>Good communication and teamwork skills.</li><li>Ability to work in field and office environments.</li><li>Willingness to learn and develop professionally.</li></ul><p>Working Conditions</p><p>Office and field-based work environment.</p><p>May require site visits and inspections.</p><p>Standard working hours with occasional field work depending on project needs.</p><p>Application Note :</p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree only in Water Engineering, Civil Engineering, Hydraulic Engineering, or a related field.</li><li>Practical Experience: 0 years (Fresh graduates are welcome to apply.)</li><li>Basic understanding of water distribution systems and hydraulic principles.</li><li>Ability to read engineering drawings and technical specifications.</li><li>Familiarity with basic hydraulic analysis concepts.</li><li>Proficiency in Microsoft Office (Word, Excel, PowerPoint).</li><li>Knowledge of engineering software is an advantage.</li><li>Strong analytical and problem-solving skills.</li><li>Attention to detail and accuracy.</li><li>Good communication and teamwork skills.</li><li>Ability to work in field and office environments.</li><li>Willingness to learn and develop professionally.</li><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <p><br></p> <p> <strong>Job Purpose:</strong> </p> <p> <strong> </strong> </p> <p>Provides Specialized contracts baking for Operations at RPI, under Manager Contracts for Operations scope s to support Downstream RPI (Operations), acting as team player for contract preparation, tender specifications, business demands, technical and commercial standards to meet end user s timelines by; (1) Delivery of procurement planning assigned tasks, (2) Compilation of Tender Documents (ITT) &amp; Contract Packages in compliance of Oil &amp; Gas industry standards, (3) Preparation of Contract documents, amendments, variations in accordance with approved OQ contract policy (correspondence with counterparties, corrective actions identification, corrective actions endorsement, and corrective actions execution and monitoring), (4) Execution and distribution of contract documents to Contractors and User Departments., (5) Gathering information regarding the status of ongoing contracts and issue periodical reports, (Expiring/new contacts identification, Establishment of negotiating team, Definition of contracting strategy, Negotiation and contracting, and Contract signing and filing, etc.); and (6) Provides administrative assistance to staff / clients in contract related issues; in order to ensure their compliance and the conditions agreed in the SLA and relevant policies.</p> <p> </p> <p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p> <p> <strong>Main tasks and responsibilities:</strong> </p> <p> <strong> </strong> </p> <p> <strong>Scope:</strong> </p> <p> <strong> </strong> </p> <p> <strong> </strong> </p> <p> <strong> </strong> </p> <p> <strong> </strong> </p> <p> <strong> </strong> </p> <p> <strong>Scope </strong> </p> <p> <strong> </strong> </p> <p>RPI Operations </p> <p>Operation Contracts:</p> <p>Raw materials supply, </p> <p>chemicals, </p> <p>Catalyst, </p> <p>Additives, </p> <p>Diesel, </p> <p>Operation of Utilities </p> <p>Waste management services, such as the collection, treatment, and disposal of hazardous and non-hazardous waste, as well as environmental monitoring and compliance services</p> <p>logistics, </p> <p>inventory management,<strong> </strong> </p> <p> <strong> </strong> </p> <p> <strong> </strong> </p> <p> <strong> </strong> </p> <p> <strong>Accountabilities: </strong> </p> <p> <strong> </strong> </p> <p> <strong> General </strong> </p> <p>Create library to learn from previous mistakes </p> <p>Execute the full contract cycle from pre-award to post-award and carry out the contract (includes the tender-board approvals). </p> <p>Executes end-to end process and recommend changes that will suit the design / process</p> <p>Implementing the support strategy as key agent for assigned client (OMT RPI) </p> <p>Executes the design, develop, build, test of strategy</p> <p> <strong>Contract Planning &amp; Preparation </strong> </p> <p> <strong> </strong> </p> <p>Create contracts plans well ahead for Operations Contracts in order to meet end user s timelines. </p> <p>Check the synergy between them and unify the common ones before starting tendering processes.</p> <p>Develops plans using detailed drawings.</p> <p>Preparing estimates and budgets.</p> <p>Creating accurate project specifications.</p> <p>Designing engineering experiments.</p> <p>Completing regulatory documents concerning safety issues.</p> <p>Analyses contract requests from stakeholders &amp; determines the appropriate method of contracting / procurements.</p> <p>Ensures proper bids technical and commercial evaluations are done in line with the internal policies and procedures.</p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Principal Reservoir Engineering Grade Stream Upstream E&amp;P Function Operated Assets Subsurface - Development Location Oman - HO Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Team Lead Bisat WRM Direct reports Job purpose <br>Apply reservoir engineering &amp; Simulation to the subsurface development ABB Development, by (1) Conducting workflows pertaining to reserves maturation, well testing, field development planning update reservoir management strategies, (2) Monitor a range of activities, including well surveillance, fluid sampling, well testing and completion operations, (3) Work and support with multi-disciplinary team to apply reservoir engineering practices to reservoir management, well test design and analysis, reservoir simulation, reserves evaluation &amp; estimation, and (4) Directing lab workflows, managing lab data, working PVT data analysis (with internal and external PVT reports), developing EoS models &amp; BOT, developing final report, and presenting post project reviews with BUs. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justification s, and best international practices in consonance with national objectives. Main tasks and responsibilities <br><br>Provide guidance to support the Manager ABB Development in achieving desired performance objectives. <br>Guide Manager ABB Development &amp; Reservoir Team to aid in maintaining high technical standards <br>Guide on development plans / programs as required by the Manager ABB Development <br>Guide on fluid characterization studies for understanding fluid distribution in the field Guide on analysis and interpretation of RFT / MDT data as required <br>Participate in integrated field studies for maturing hydrocarbon resources <br>Evaluate well/reservoir performance and recommend production improvement opportunities <br>Guide on RE input to business planning, reserve evaluation and well proposals <br>Work with other disciplines on hydrocarbon maturation to further develop the asset <br>Evaluate well/reservoir performance and recommend production improvement opportunities <br>Provide RE input to business planning, reserve evaluation and well proposals <br>Participate in integrated field studies <br>Work with other disciplines on hydrocarbon maturation to further develop the asset <br>Coach and mentor early career professionals Participate in integrated field studies for maturing hydrocarbon resources <br><b>Key interactions <br></b>Internal: Subsurface Development &amp; Exploration / Well Delivery / Facilities / Operations / Supply Chain <br>External: Contractors, Technical Committees Notable Working Conditions. Field operations and o ffice environment, computer screen use. Education requirements Bachelor s degree in Petroleum Engineering or equivalent Language requirements Excellent knowledge of written, read, and spoken English (required) - Arabic - Native (desirable) Background and experience Competencies and skills <br>10+ years experience in Reservoir Engineering within Oil &amp; Gas industry <br>Proficiency in industry standard reservoir engineering packages such as Kappa Saphire, OFM, Eclipse <br>Experience with reservoir management <br>Experience with reservoir simulation <br>Good understanding of production operations and completion procedures <br>Experience in tight gas reservoirs is a plus <br>Experience in working with multi-disciplinary team role <br>Soft: <br><br>Leading multidisciplinary integrated teams and contribution to exploration opportunity risking and ranking. <br>Has participated or contributed to technical reviews, audits and preparation of Field Development Plans <br>Self-starter with the ability to multi task while maintaining priorities <br><br><br>Technical: <br><br>Computer literacy including MS Office <br>Project Management skills <br><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education requirements Bachelor s degree in Petroleum Engineering or equivalent Language requirements Excellent knowledge of written, read, and spoken English (required) - Arabic - Native (desirable) Background and experience Competencies and skills <br>10+ years experience in Reservoir Engineering within Oil &amp; Gas industry <br>Proficiency in industry standard reservoir engineering packages such as Kappa Saphire, OFM, Eclipse <br>Experience with reservoir management <br>Experience with reservoir simulation <br>Good understanding of production operations and completion procedures <br>Experience in tight gas reservoirs is a plus <br>Experience in working with multi-disciplinary team role <br>Soft: <br><br>Leading multidisciplinary integrated teams and contribution to exploration opportunity risking and ranking. <br>Has participated or contributed to technical reviews, audits and preparation of Field Development Plans <br>Self-starter with the ability to multi task while maintaining priorities <br><br><br>Technical: <br><br>Computer literacy including MS Office <br>Project Management skills <br><br></p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Senior Planning Engineer to join our team in Musandam, Oman to lead consolidated plan initiatives and support the delivering of planned production &amp; profitability across the SRF by optimizing planning by working alongside with the Project team to deliver the optimum project plan for the SFR project. Assignment duration is one year.<br> &nbsp;</p><br><br> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>