وظائف مشرف حركه

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: Mechanical Supervisor</p><p>Reports To: Maintenance Manager / Mechanical Engineering Manager / Site Manager</p><p>Job Details</p><p>Number of Vacancies: 55 Positions</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The Mechanical Supervisor is responsible for supervising and coordinating mechanical maintenance and installation activities across site operations. The role ensures that mechanical systems, equipment, and machinery are operating efficiently, safely, and in compliance with company standards and procedures.</p><p>Key Responsibilities</p><ul><li>Supervise daily mechanical maintenance and installation activities on site.</li><li>Assign tasks to technicians and ensure proper execution of work plans.</li><li>Monitor performance of mechanical systems, equipment, and machinery.</li><li>Ensure preventive and corrective maintenance activities are completed on time.</li><li>Inspect completed work to ensure quality standards and technical specifications are met.</li><li>Support troubleshooting and resolution of mechanical faults and breakdowns.</li><li>Ensure compliance with safety regulations and company procedures.</li><li>Coordinate with engineering and operations teams for maintenance planning.</li><li>Maintain maintenance records, reports, and work logs.</li><li>Ensure proper use of tools, equipment, and materials.</li><li>Support training and guidance of junior technicians and workers.</li></ul><p>Qualifications</p><p>Bachelor s Degree only in Mechanical Engineering or a related field.</p><p>Experience</p><p>Practical Experience: 0 years (Fresh graduates only)</p><p>No prior experience required.</p><p>Technical Skills</p><ul><li>Basic understanding of mechanical systems, maintenance, and equipment operations.</li><li>Ability to read technical drawings and maintenance manuals.</li><li>Familiarity with preventive maintenance procedures.</li><li>Basic knowledge of Microsoft Office (Word, Excel, Outlook).</li></ul><p>Soft Skills</p><ul><li>Strong leadership and supervisory skills.</li><li>Good communication and coordination abilities.</li><li>Problem-solving and decision-making skills.</li><li>Attention to detail and responsibility.</li><li>Ability to work under pressure and in field environments.</li><li>Team management and task organization skills.</li></ul><p>Working Conditions</p><ul><li>Site-based and operational work environment.</li><li>May require field supervision and outdoor work.</li><li>Standard working hours with possible overtime depending on project needs.</li></ul><p>Application Note :</p><p>The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age</p><p>The closing date is 3rd August 2026.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree only in Mechanical Engineering or a related field.</li><li>Practical Experience: 0 years (Fresh graduates only)</li><li>No prior experience required.</li><li>Basic understanding of mechanical systems, maintenance, and equipment operations.</li><li>Ability to read technical drawings and maintenance manuals.</li><li>Familiarity with preventive maintenance procedures.</li><li>Basic knowledge of Microsoft Office (Word, Excel, Outlook).</li><li>Strong leadership and supervisory skills.</li><li>Good communication and coordination abilities.</li><li>Problem-solving and decision-making skills.</li><li>Attention to detail and responsibility.</li><li>Ability to work under pressure and in field environments.</li><li>Team management and task organization skills.</li><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>

<p>We have openings for our prestigious client in Oman; they have openings for "MEP Engineer / Plumbing Supervisor / Electrical Supervisor / HVAC Supervisor Experience in Construction Projects - Oman Location!!!</p><p><strong>Desired Candidate Profile</strong></p><p>1) CANDIDATES SHOULD HAVE EXP IN COMMERICAL BUILDINGS / HOTELS / INDUSTRIAL PROJECTS ETC.</p><p>2) GCC EXP IS PREFERRED</p><p>Below are the open positions:</p><ul><li>1) MEP Engineer.</li><ul><li>a) Degree in Electrical Engineering.</li><li>b) Minimum 5+ years of experience as MEP Engineer in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>2) Plumbing Supervisor.</li><ul><li>a) Diploma / ITI in Mechanical.</li><li>b) Minimum 8+ years of experience as Plumbing Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>3) HVAC Supervisor.</li><ul><li>a) Diploma / ITI in Mechanical.</li><li>b) Minimum 8+ years of experience as HVAC Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>4) Electrical Supervisor.</li><ul><li>a) Diploma / ITI in Electrical.</li><li>b) Minimum 8+ years of experience as Electrical Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul></ul>

<p>Dear Candidates, Greetings from AMExemplar Services!!! We have openings for our prestigious client in Oman; they have openings for " MEP Engineer / Plumbing Supervisor / Electrical Supervisor / HVAC Supervisor Experience in Construction Projects - Oman Location!!! PLEASE NOTE:- 1) CANDIDATES SHOULD HAVE EXP IN COMMERICAL BUILDINGS / HOTELS / INDUSTRIAL PROJECTS ETC. 2) GCC EXP IS PREFERRED If interested, please send CV &amp; documents on EMAIL_ADDRESS Please provide below details:- Post Applied:- Current Company:- Current Location:- Current Salary:- Expected Salary:- Total years of Exp:- No of yrs exp as per post applied in Construction Projects:- No of years Gulf Exp:- Notice Period:- Passport number:- Passport Expiry Date:- Highest Qualifications:- Date of Birth:- Age:-</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma / ITI in Electrical.</li><li>Minimum 8+ years of experience as Electrical Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced and skilled Aluminum Foreman to supervise and manage aluminum fabrication and installation works at site. The ideal candidate should have strong leadership skills and hands-on experience in aluminum systems.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Experience 1 - 4 Years<br>Qualification 10th Pass<br>Key Skills ALUMINUM FOREMAN<br>Aluminum Technician<br>Windows Aluminum Technician<br>Foreman<br>Dyeing Supervisor</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Role: Service / Maintenance Supervisor</b></p><p>Industry Type: Oil &amp; Gas</p><p>Department: Production, Manufacturing &amp; Engineering</p><p>Employment Type: Full Time, Temporary/Contractual</p><p>Role Category: Operations, Maintenance &amp; Support</p><p>Education</p><p>UG: Diploma in Electronics And Instrumentation, Instrumentation And Control Engineering</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><br></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>As Human Resources Supervisor, I will fully comprehend the vision of Six Senses to help people reconnect with themselves, others and the world around them and our values of local sensitivity and global sensibility, crafted experiences, emotional hospitality, responsible and caring, fun and quirky and pioneering wellness. </p><br><p>Sustainability, Wellness and Out of the Ordinary experiences are at the core of everything we do at Six Senses. I will safeguard these pillars and ensure full knowledge and active participation of all our brand initiatives.</p><br><p><strong>Duties and Responsibilities&nbsp;</strong></p><br><p>As&nbsp;Human Resources&nbsp;Supervisor, I&nbsp;will assume full responsibility for the efficient operation&nbsp;in the following:</p><br><ul><li>Assist&nbsp;in preparing a HR &amp; Training plans for the resort annual based on systematic research and needs analysis.</li><li>Assist&nbsp;with the recruitment and interview processes.</li><li>Coordinate new hire documentation, contracts, and system entries.</li><li>Assist&nbsp;with coordination of new hire orientation and training for new hosts.</li><li>Assist with end-to-end employee lifecycle processes, including onboarding, probation reviews, internal movements, and offboarding.</li><li>Maintain accurate employee records and HR databases.</li><li>Collaborate closely with finance teams to ensure timely and accurate payroll processing.</li><li>Assist&nbsp;with variety of host events and initiatives in addition to other administrative duties.</li><li>Upkeep Six Senses guidelines and standards of service and operation. My performance benchmarks are&nbsp;maintained&nbsp;and exceeded.</li><li>Strictly adhere to LQA standards and guest comments.</li></ul><p><strong>Qualifications</strong></p><br><p>To execute the position of Human Resources Supervisor, I must have the required qualifications, technical skills and experience in a similar role in luxury hotels with proven results and includes the following:</p><br><ul><li>Diploma or equivalent in Business, preferably in Human Resources and at least 2 years’ experience in a similar setting. Hospitality diploma/degree from a recognized hospitality school is preferred.</li><li>Technical skills include advanced MS Office, Outlook platforms.</li><li>Fluent in English</li></ul><p>The above is intended to provide an overview of the role and responsibilities for a Human Resources Supervisor at Six Senses Zighy Bay. It is not and does not infer that the above is an inclusive and/or exhaustive list of the duties and responsibilities inherent to the position.</p><br><p>Six Senses Zighy Bay is an equal opportunity employer. This policy applies to all terms and conditions of employment.</p><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>PTW Civil Supervisor</b></p><p><b><br></b></p><ul ><li >Diploma or Degree with 5+ yrs. exp.</li><li >Must have valid/expired PDO PTW card.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><br></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><span >Civil Supervisor</span></p><p>A leading O&amp;G contracting company</p><p>Posted by Dynamic Staffing Services</p><p>Company Logo</p><p>6 - 10 years</p><p><br></p><p>Continue with Google</p><p>Job description</p><p>Role &amp; responsibilities</p><p><br></p><p>Supervise site execution, manage manpower, ensure adherence to drawings, safety, and quality requirements.</p><p><br></p><p><br></p><p>Preferred candidate profile</p><p><br></p><p>Diploma in Civil Engineering with 6 to 10 years (Oil &amp; Gas)</p><p><br></p><p><br></p><p>Role: Construction / Site Supervisor</p><p>Industry Type: Oil &amp; Gas</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Construction Engineering</p><p>Education</p><p>UG: Diploma in Civil Engineering</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma in Civil Engineering with 6 to 10 years (Oil &amp; Gas)</p><p></p></section>

<p><h4>Job Description</h4> <p>The Traffic Management Specialist arranges the shipment of Global Prepositioned Material Services (GPMS) cargo to various worldwide destinations via air, land, and sea. The incumbent must comply with all applicable international and federal transportation laws, regulations, tariffs, and Department of Defense (DOD) guidance. Must be able to gain access to Logistics Tool Suite (LTS), Global Freight Management (GRM), Cargo Movement Operating System (CMOS), Integrated Logistics System-Supply (ILS-S), Global Air Transportation Execution System (GATES), Integrated Computerized Deployment System (ICODES), Integrated Booking System (IBS), Joint Container Management system (JCM), Wood Packaging Materials (WPM) Management Toolset, Global Asset Reporting Tool (GART), and web-based tracking systems such as Integrated Data Environment/Global Transportation Network Convergence (IGC), Radio Frequency Identification (RFID-ITV) Tracking Portal, Global Decision Support Systems (GDSS-2), and Single Mobility System (SMS) to ensure in-transit visibility (ITV) within the Defense Transportation System (DTS). Ensures all shipments comply with the International Trade and Arms Regulations (ITAR), the Performance Work Statement (PWS), and Amentum ISO 9001 Quality Management System (QMS). Must be able to complete AMMO-43, Intermodal Dry Cargo Container/CSC Reinspection, AMMO-62, Technical Transportation of Hazardous Materials Distance Learning Courses, and WPM certification/recertification web-based training. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Inspects, accepts documentation (DD Form 1149/1348-1), prepares, and processes all outbound/inbound cargo offered for transportation in the Defense Transportation System (DTS).</li> <li>Checks for completeness and accuracy. Verifies the nomenclatures, quantity, Transportation Control Numbers (TCN), Transportation Account Code (TAC), consignor and consignee codes, hazardous/classified materials, ITARS certifications, and other essential transportation data.</li> <li>Properly classifies freight, selects commodity codes, selects the most efficient mode of shipment, and controls obligations for government transportation funds.</li> <li>Prepares all required shipping documents for data input to CMOS/GATES, assigns Transportation Control Numbers, produces labels, issues truck manifest for general/hazardous cargo, and maintains manifest logs.</li> <li>Uses automated computer systems to process and document to accurately input the Transportation Control Numbers, Transportation Accounting Codes, consignor and consignee codes, and other essential transportation data into CMOS, GATES, or IBS.</li> <li>Inspects hazardous materials to ensure proper packaging, marking, labeling, documentation, and certification in accordance with applicable Dangerous Goods Regulations (AFMAN 24-604, 49 Code of Federal Regulation, International Air Transport Association (IATA), and International Maritime Dangerous Goods (IMDG)).</li> <li>Inspects, accepts, and inventories all incoming freight and containers for overages, shortages, and damage before acceptance. When required, initiates and completes DD Form 361, Transportation Discrepancy Report (TDR).</li> <li>Provides asset visibility and real-time view to track customer queries using IGC, RFID-ITV, GDSS2, or SMS.</li> <li>Prepares shipping documents and movement requests for international and domestic shipments between sites and container movements from the Sea Port of Embarkation (POE) to the Sea Port of Debarkation (POD) shipped by surface or sealift.</li> <li>Performs Port Handling and Inland Transportation (PHIT) and ensures the subcontractor performs all duties and responsibilities according to the Statement of Work (SOW). Inspects and documents each shipment for contract compliance on a Customer Service Survey form.</li> <li>Processes Export Traffic Release Requests (ETRR) for sealift shipments using Surface Deployment Distribution Command (SDDC) - Integrated Booking System (IBS).</li> <li>Performs host country customs clearances and liaises with military and host country ministries on import and export for border customs clearances, airport customs clearances, and seaport clearances.</li> <li>Selects and initiates contact with local carriers to arrange appropriate transport equipment for containers, classified, sensitive, hazardous, or outsized shipments based on the size, weight, commodity description, freight classification, required delivery date, priority, or other special requirements.</li> <li>Loads/unloads 463L pallets, equipment, vehicles, and ISO containers from flat-bed/low-bed trucks. May assist in loading/unloading military vessels at the seaport.</li> <li>Assists the Pallet and Net Managers with inspections, issuing, accounting, controlling, reporting, and maintaining operation stock levels of 463L pallets, nets, and other tie-down equipment located on-site.</li> <li>Assists the WPM Custodian with inspecting and certification, record keeping, and reporting the receipt and usage requirements.</li> <li>Assists the CCO with completing the monthly container inventory, ensuring all containers located on-site are inventoried between the 1st and 30th day of each month.</li> <li>Reports all lost, damaged, destroyed, and modified containers to the CCO within 12 hours of discovery.</li> <li>Performs container inspections and reports findings on the DA 2404 equipment inspection and maintenance worksheet.</li> <li>Receives/ships all containers in JCM within 12 hours of receipt or departure.</li> <li>Operates GATES and ICODES to process and manifest cargo and to develop load plans for military and commercial aircraft.</li> <li>Prepares, inspects, reviews, and submits preload plans, hazardous materials diplomatic clearances (HAZDIP), and other documents to facilitate air movement.</li> <li>Inspects cargo documentation, conducts joint inspections, and certifies that cargo is built correctly and airworthy.</li> <li>Computes weight and balance and certifies weight distribution of the aircraft with passengers, cargo, and baggage.</li> <li>Determines cargo configuration and aircraft loading requirements in accordance with Air Transportability Test Loading Activity Certifications (ATTLA).</li> <li>Loads, unloads, and services aircraft. Ensures cargo loads are secure and tied down. Assists load team chief with selecting, assembling, palletizing, and transporting cargo loads to and from aircraft and storage areas.</li> <li>Safely transports and handles explosives.</li> <li>Performs passenger service procedures, check-in, manifests passengers and baggage, and performs security checks. Loads/unloads passengers and baggage from aircraft.</li> <li>Performs weighing of cargo, vehicles, and outsized cargo to determine the center of balance for rolling stock and ensures cargo dimensions are within pallet and aircraft limitations.</li> <li>Implements, documents, and controls quality, training, environment, and safety programs.</li> <li>Prepares and handles cargo in accordance with all prescribed regulations, instructions, technical orders, and procedures.</li> <li>Accomplishes receiving process for all inbound cargo functions of MILSTRIP and NON-MILSTRIP shipments addressed to the host installation SRAN in accordance with regulation.</li> <li>Maintains technical orders, publications, forms, and files required for traffic management operations.</li> <li>Compiles data and submits reports and other correspondence as required.</li> <li>Performs other duties as assigned.</li> <li>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum PowerPoint, Excel, and Word programs.</li> <li>Knowledge of related shipping/receiving procedures and the ability to detect/report problems to appropriate personnel.</li> <li>Excellent organizational skills and the ability to effectively work under pressure and strict timelines required.</li> <li>Ability to maintain an effective working relationship with coworkers, including multi-national staff and external and internal customers is required.</li> <li>Must be able to communicate clearly and concisely, orally and in writing to coworkers and customers while maintaining Communication Security (COMSEC), Operational Security (OPSEC), and Computer Security (COMPUSEC).</li> <li>Knowledge and understanding of MHE equipment operations and associated hazards required.</li> <li>Will be required to receive training and operate material handling equipment.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Minimum of three years of experience in Traffic Management (TMO)/Air Freight operations or associate degree in a related field of study required.</li> <li>Experience may include but is not limited to import/export, freight acceptance, preparation, handling, cargo shipping/receiving by surface, sea and air data records, container management, customer service, cargo operating computer systems, or other related experience.</li> <li>Possess a current HAZMAT Certification in accordance with AFMAN 24-604 or ability to obtain it upon acceptance of the position.</li> <li>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Experienced in aircraft cargo loading/unloading and cargo tie-down restraint procedures, palletizing cargo on single or multiple 463L pallets using side and top nets, straps, chains, and devices for restraint preferred.</li> <li>Familiarization and certification in AMC Airlift Load Planning, or equivalent, and Joint Inspection process is preferred.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong>MEP Supervisor</strong> </p> <p> <strong>Job Summary:</strong> </p> <p>The MEP Supervisor is responsible for overseeing the installation, maintenance, and operations of mechanical, electrical, and plumbing systems on a construction site or within a facility. The role ensures that all MEP works are carried out according to specifications, standards, and project timelines, while coordinating between multiple teams and subcontractors.</p> <p> <strong>Key Responsibilities:</strong> </p> <ul> <li>Supervise and coordinate the work of MEP subcontractors and in-house teams.</li> <li>Review MEP drawings, plans, and specifications to ensure proper execution.</li> <li>Monitor installation progress and ensure compliance with safety, quality, and design standards.</li> <li>Plan and allocate resources to meet project timelines and budgets.</li> <li>Conduct regular inspections and quality checks for all MEP works.</li> <li>Coordinate with architects, structural engineers, and other stakeholders.</li> <li>Troubleshoot and resolve MEP-related issues on-site.</li> <li>Maintain daily reports and documentation of site activities and progress.</li> <li>Ensure that all work complies with local codes, regulations, and industry standards.</li> <li>Participate in testing and commissioning of MEP systems.</li> </ul> <p> <strong>Qualifications:</strong> </p> <ul> <li>Diploma or Bachelor s Degree in Mechanical, Electrical, or related engineering field.</li> <li>Minimum 8+years of experience in a supervisory MEP role in construction or facilities management.</li> <li>Strong knowledge of HVAC, electrical, plumbing, and fire protection systems.</li> <li>Familiarity with AutoCAD, MS Office, and project management tools.</li> <li>Excellent organizational and leadership skills.</li> <li>Strong communication and interpersonal abilities.</li> <li>Knowledge of safety and quality control procedures.</li> </ul> <p> <strong>Preferred:</strong> </p> <ul> <li>Certification in MEP or building services.</li> <li>Experience with large-scale residential, commercial, or industrial projects.</li> </ul></div></section>

<p><h4>Job Description</h4> <p>The Traffic Management Specialist arranges the shipment of Global Prepositioned Material Services (GPMS) cargo to various worldwide destinations via air, land, and sea. The incumbent must comply with all applicable international and federal transportation laws, regulations, tariffs, and Department of Defense (DOD) guidance. Must be able to gain access to Logistics Tool Suite (LTS), Global Freight Management (GRM), Cargo Movement Operating System (CMOS), Integrated Logistics System-Supply (ILS-S), Global Air Transportation Execution System (GATES), Integrated Computerized Deployment System (ICODES), Integrated Booking System (IBS), Joint Container Management system (JCM), Wood Packaging Materials (WPM) Management Toolset, Global Asset Reporting Tool (GART), and web-based tracking systems such as Integrated Data Environment/Global Transportation Network Convergence (IGC), Radio Frequency Identification (RFID-ITV) Tracking Portal, Global Decision Support Systems (GDSS-2), and Single Mobility System (SMS) to ensure in-transit visibility (ITV) within the Defense Transportation System (DTS). Ensures all shipments comply with the International Trade and Arms Regulations (ITAR), the Performance Work Statement (PWS), and Amentum ISO 9001 Quality Management System (QMS). Must be able to complete AMMO-43, Intermodal Dry Cargo Container/CSC Reinspection, AMMO-62, Technical Transportation of Hazardous Materials Distance Learning Courses, and WPM certification/recertification web-based training. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Inspects, accepts documentation (DD Form 1149/1348-1), prepares, and processes all outbound/inbound cargo offered for transportation in the Defense Transportation System (DTS).</li> <li>Checks for completeness and accuracy. Verifies the nomenclatures, quantity, Transportation Control Numbers (TCN), Transportation Account Code (TAC), consignor and consignee codes, hazardous/classified materials, ITARS certifications, and other essential transportation data.</li> <li>Properly classifies freight, selects commodity codes, selects the most efficient mode of shipment, and controls obligations for government transportation funds.</li> <li>Prepares all required shipping documents for data input to CMOS/GATES, assigns Transportation Control Numbers, produces labels, issues truck manifest for general/hazardous cargo, and maintains manifest logs.</li> <li>Uses automated computer systems to process and document to accurately input the Transportation Control Numbers, Transportation Accounting Codes, consignor and consignee codes, and other essential transportation data into CMOS, GATES, or IBS.</li> <li>Inspects hazardous materials to ensure proper packaging, marking, labeling, documentation, and certification in accordance with applicable Dangerous Goods Regulations (AFMAN 24-604, 49 Code of Federal Regulation, International Air Transport Association (IATA), and International Maritime Dangerous Goods (IMDG)).</li> <li>Inspects, accepts, and inventories all incoming freight and containers for overages, shortages, and damage before acceptance. When required, initiates and completes DD Form 361, Transportation Discrepancy Report (TDR).</li> <li>Provides asset visibility and real-time view to track customer queries using IGC, RFID-ITV, GDSS2, or SMS.</li> <li>Prepares shipping documents and movement requests for international and domestic shipments between sites and container movements from the Sea Port of Embarkation (POE) to the Sea Port of Debarkation (POD) shipped by surface or sealift.</li> <li>Performs Port Handling and Inland Transportation (PHIT) and ensures the subcontractor performs all duties and responsibilities according to the Statement of Work (SOW). Inspects and documents each shipment for contract compliance on a Customer Service Survey form.</li> <li>Processes Export Traffic Release Requests (ETRR) for sealift shipments using Surface Deployment Distribution Command (SDDC) - Integrated Booking System (IBS).</li> <li>Performs host country customs clearances and liaises with military and host country ministries on import and export for border customs clearances, airport customs clearances, and seaport clearances.</li> <li>Selects and initiates contact with local carriers to arrange appropriate transport equipment for containers, classified, sensitive, hazardous, or outsized shipments based on the size, weight, commodity description, freight classification, required delivery date, priority, or other special requirements.</li> <li>Loads/unloads 463L pallets, equipment, vehicles, and ISO containers from flat-bed/low-bed trucks. May assist in loading/unloading military vessels at the seaport.</li> <li>Assists the Pallet and Net Managers with inspections, issuing, accounting, controlling, reporting, and maintaining operation stock levels of 463L pallets, nets, and other tie-down equipment located on-site.</li> <li>Assists the WPM Custodian with inspecting and certification, record keeping, and reporting the receipt and usage requirements.</li> <li>Assists the CCO with completing the monthly container inventory, ensuring all containers located on-site are inventoried between the 1st and 30th day of each month.</li> <li>Reports all lost, damaged, destroyed, and modified containers to the CCO within 12 hours of discovery.</li> <li>Performs container inspections and reports findings on the DA 2404 equipment inspection and maintenance worksheet.</li> <li>Receives/ships all containers in JCM within 12 hours of receipt or departure.</li> <li>Operates GATES and ICODES to process and manifest cargo and to develop load plans for military and commercial aircraft.</li> <li>Prepares, inspects, reviews, and submits preload plans, hazardous materials diplomatic clearances (HAZDIP), and other documents to facilitate air movement.</li> <li>Inspects cargo documentation, conducts joint inspections, and certifies that cargo is built correctly and airworthy.</li> <li>Computes weight and balance and certifies weight distribution of the aircraft with passengers, cargo, and baggage.</li> <li>Determines cargo configuration and aircraft loading requirements in accordance with Air Transportability Test Loading Activity Certifications (ATTLA).</li> <li>Loads, unloads, and services aircraft. Ensures cargo loads are secure and tied down. Assists load team chief with selecting, assembling, palletizing, and transporting cargo loads to and from aircraft and storage areas.</li> <li>Safely transports and handles explosives.</li> <li>Performs passenger service procedures, check-in, manifests passengers and baggage, and performs security checks. Loads/unloads passengers and baggage from aircraft.</li> <li>Performs weighing of cargo, vehicles, and outsized cargo to determine the center of balance for rolling stock and ensures cargo dimensions are within pallet and aircraft limitations.</li> <li>Implements, documents, and controls quality, training, environment, and safety programs.</li> <li>Prepares and handles cargo in accordance with all prescribed regulations, instructions, technical orders, and procedures.</li> <li>Accomplishes receiving process for all inbound cargo functions of MILSTRIP and NON-MILSTRIP shipments addressed to the host installation SRAN in accordance with regulation.</li> <li>Maintains technical orders, publications, forms, and files required for traffic management operations.</li> <li>Compiles data and submits reports and other correspondence as required.</li> <li>Performs other duties as assigned.</li> <li>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum PowerPoint, Excel, and Word programs.</li> <li>Knowledge of related shipping/receiving procedures and the ability to detect/report problems to appropriate personnel.</li> <li>Excellent organizational skills and the ability to effectively work under pressure and strict timelines required.</li> <li>Ability to maintain an effective working relationship with coworkers, including multi-national staff and external and internal customers is required.</li> <li>Must be able to communicate clearly and concisely, orally and in writing to coworkers and customers while maintaining Communication Security (COMSEC), Operational Security (OPSEC), and Computer Security (COMPUSEC).</li> <li>Knowledge and understanding of MHE equipment operations and associated hazards required.</li> <li>Will be required to receive training and operate material handling equipment.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Minimum of three years of experience in Traffic Management (TMO)/Air Freight operations or associate degree in a related field of study required.</li> <li>Experience may include but is not limited to import/export, freight acceptance, preparation, handling, cargo shipping/receiving by surface, sea and air data records, container management, customer service, cargo operating computer systems, or other related experience.</li> <li>Possess a current HAZMAT Certification in accordance with AFMAN 24-604 or ability to obtain it upon acceptance of the position.</li> <li>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Experienced in aircraft cargo loading/unloading and cargo tie-down restraint procedures, palletizing cargo on single or multiple 463L pallets using side and top nets, straps, chains, and devices for restraint preferred.</li> <li>Familiarization and certification in AMC Airlift Load Planning, or equivalent, and Joint Inspection process is preferred.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Traffic Management Specialist arranges the shipment of Global Prepositioned Material Services (GPMS) cargo to various worldwide destinations via air, land and sea. The Incumbent must comply with all applicable International and Federal Transportation Laws, Regulations, Tariffs and Department of Defense (DOD) guidance. Must be able to gain access to Logistics Tool Suite (LTS), Global Freight Management (GRM), Cargo Movement Operating System (CMOS), Integrated Logistics System-Supply (ILS-S), Global Air Transportation Execution System (GATES), Integrated Computerized Deployment System (ICODES), Integrated Booking System (IBS), Joint Container Management system (JCM), Wood Packaging Materials (WPM) Management Toolset, Global Asset Reporting Tool (GART) and web-based tracking systems such as Integrated Data Environment/Global Transportation Network Convergence (IGC), Radio Frequency Identification (RFID-ITV) Tracking Portal, Global Decision Support Systems (GDSS-2) and Single Mobility System (SMS) to ensure In-transit Visibility (ITV) within the Defense Transportation System (DTS). Ensures all shipments comply with the International Trade and Arms Regulations (ITAR), the Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS). Must be able to complete AMMO-43, Intermodal Dry Cargo Container/CSC Reinspection, AMMO-62, Technical Transportation of Hazardous Materials Distance Learning Courses and WPM certification/recertification web-based training. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p><p>Principal Accountabilities</p><ul><li>Inspects, accepts documentation (DD Form 1149/1348-1), prepares and processes all outbound/inbound cargo offered for transportation in the Defense Transportation System (DTS).</li><li>Checks for completeness and accuracy. Verifies the Nomenclatures, Quantity, Transportation Control Numbers (TCN), Transportation Account Code (TAC), Consignor and Consignee Codes, Hazardous/Classified materials, ITARS certifications and other essential transportation data.</li><li>Properly classified freight, selects commodity codes, selects the most efficient mode of shipment and controls obligations for government transportation funds.</li><li>Prepares all required shipping documents for data input to CMOS/GATES, assigns Transportation Control Numbers, produces labels, issues truck manifest for general/hazardous cargo and Maintains Manifest logs.</li><li>Uses automated computer systems to process and document to accurately input the Transportation Control Numbers, Transportation Accounting Codes, consignor and consignee codes and other essential transportation data into CMOS, GATES or IBS.</li><li>Inspects Hazardous Materials to ensure proper packaging, marking, labeling, documentation and certification in accordance with applicable Dangerous Goods Regulations (AFMAN 24-604, 49 Code of Federal Regulation, International Air Transport Association (IATA) and International Maritime Dangerous Goods (IMDG).</li><li>Inspects, accepts and inventories all incoming freight and containers for overages, shortages and damage before acceptance. When required, initiate and complete DD Form 361, Transportation Discrepancy Report (TDR).</li><li>Provides asset visibility and real-time view to track customer queries using IGC, RFID-ITV, GDSS2 or SMS.</li><li>Prepares shipping documents and Movement Requests for international and domestic shipments between sites and container movements from the Sea Port of Embarkation (POE) to the Sea Port of Debarkation (POD) shipped by surface or sealift.</li><li>Performs Port Handling and Inland Transportation (PHIT) and ensures the subcontractor performs all duties and responsibilities according to the Statement of Work (SOW). Inspects and documents each shipment for contract compliance on a Customer Service Survey form.</li><li>Processes Export Traffic Release Requests (ETRR) for sealift shipments using Surface Deployment Distribution Command (SDDC) - Integrated Booking System (IBS).</li><li>Performs Host Country customs clearances and liaises with Military and Host country Ministries on Import and Export for Border Customs Clearances, Airport Customs Clearances and Seaport Clearances.</li><li>Selects and initiates contact with local carriers to arrange appropriate transport equipment for containers, classified, sensitive, hazardous or outsized shipments based on the size, weight, commodity description, freight classification, required delivery date, priority or other special requirements.</li><li>Loads/unloads 463L pallets, equipment, vehicles and ISO containers from flat-bed/low-bed trucks. May assist in loading/unloading military vessels at the seaport.</li><li>Assists the Pallet and Net Managers with inspections, issuing, accounting, controlling, reporting and maintaining operation stock levels of 463L pallets, nets and other tie-down equipment located on-site.</li><li>Assists the WPM Custodian with inspecting and certification, record keeping and reporting the receipt and usage requirements.</li><li>Assists the CCO with completing the monthly container inventory, ensuring all containers located on-site are inventoried between the 1st and 30th day of each month.</li><li>Reports all lost, damaged, destroyed and modified containers to the CCO within 12 hours of discovery.</li><li>Performs container inspections and reports findings on the DA 2404 equipment inspection and maintenance worksheet.</li><li>Receives/Ships all containers in JCM within 12 hours of receipt or departure.</li><li>Operates GATES and ICODES to process and manifest cargo and to develop load plans for military and commercial aircraft.</li><li>Prepares, inspects, reviews and submits Preload Plans, Hazardous Materials Diplomatic Clearances (HAZDIP) and other documents to facilitate air movement.</li><li>Inspects cargo documentation, conducts Joint Inspections and certifies that cargo is built correctly and airworthy.</li><li>Computes weight and balance and certifies weight distribution of the aircraft with passengers, cargo and baggage.</li><li>Determines cargo configuration and aircraft loading requirements in accordance with Air Transportability Test Loading Activity Certifications (ATTLA).</li><li><br></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p><p>Knowledge of related shipping/receiving procedures and the ability to detect/report problems to appropriate personnel.</p><p>Excellent organizational skills and the ability to effectively work under pressure and strict timelines required.</p><p>Ability to maintain an effective working relationship with coworkers, including multi-national staff and external and internal customers is required.</p><p>Must be able to communicate clearly and concisely, orally and in writing to coworkers and customers while maintaining Communication Security (COMSEC), Operational Security (OPSEC) and Computer Security (COMPUSEC).</p><p>Knowledge and understanding of MHE equipment operations and associated hazards required.</p><p>Will be required to receive training and operate material handling equipment.</p><p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p><p>High School diploma or equivalent required.</p><p>Minimum of three years of experience in Traffic Management (TMO)/Air Freight operations or associate degree in a related field of study required.</p><p>Experience may include but is not limited to import/export, freight acceptance, preparation, handling, cargo shipping/receiving by surface, sea and air data records, container management, customer service, cargo operating computer systems or other related experience.</p><p>Possess a current HAZMAT Certification in accordance with AFMAN 24-604 or ability to obtain it upon acceptance of the position.</p><p>Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.</p><p>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</p><p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p><p>Ability to travel domestically and internationally.</p><p>Experienced in aircraft cargo loading/unloading and cargo tie-down restraint procedures, palletizing cargo on single or multiple 463L pallets using side and top nets, straps, chains and devices for restraint preferred.</p><p>Familiarization and certification in AMC Airlift Load Planning, or equivalent, and Joint Inspection process is preferred.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong>Site Supervisor Reservoir Construction</strong> </p> <p> <strong>Job Summary:</strong> </p> <p>The Site Supervisor with expertise in reservoir construction, pump rooms, and associated compound works, including waterproofing and structural activities. Skilled in interpreting drawings, setting out, bar bending schedules (BBS), and advanced shuttering systems (H20 beams and steel walings). Strong in manpower planning, material management, and executing works as per project schedules. Proven ability to ensure quality, safety, and timely project delivery in accordance with approved drawings and specifications.</p> <p> <strong>Key Responsibilities:</strong> </p> <ul> <li>Supervise all site activities related to reservoir construction including excavation, PCC, RCC works, waterproofing, and backfilling.</li> <li>Ensure work is executed as per approved drawings, method statements, and project specifications.</li> <li>Monitor daily progress and report to the Project Engineer/Manager.</li> <li>Coordinate with subcontractors, operators, and labor teams for smooth workflow.</li> <li>Ensure proper utilization of manpower, materials, and equipment.</li> <li>Maintain site safety standards and ensure compliance with HSE regulations.</li> <li>Conduct toolbox talks and safety briefings for workers.</li> <li>Check quality of work including formwork, reinforcement, and concrete works.</li> <li>Ensure proper curing and finishing of concrete structures.</li> <li>Liaise with surveyors for level and alignment checks.</li> <li>Maintain daily site records, progress reports, and material consumption logs.</li> <li>Identify and resolve site issues and delays proactively.</li> <li>Ensure proper housekeeping and site organization.</li> </ul> <p> <strong>Required Qualifications:</strong> </p> <ul> <li>Diploma in Civil Engineering</li> <li>Minimum 3 7 years of experience in reservoir, water tank, or infrastructure construction projects.</li> </ul> <p> <strong>Skills:</strong> </p> <ul> <li>Strong knowledge of RCC works, waterproofing, and structural construction.</li> <li>Ability to read and interpret engineering drawings.</li> <li>Good leadership and team management skills.</li> <li>Knowledge of safety standards and site practices.</li> <li>Strong knowledge of material requirements for elevated water tanks.</li> <li>Understanding of stage-wise construction procedures as per project schedule.</li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As Kids Club Supervisor, you will be responsible for the following duties:</p><p>Participate in the smooth running of the Kids department on a day-to-day basis to achieve the highest possible levels of guest satisfaction. Manage the smooth operations of the Kids Club effectively on a day-to-day basis to achieve the highest possible levels of guest satisfaction. This includes covering the reception area when required and supervising the team in the absence of the Kids Club Manager. Handles guest complaints and follows correct reporting procedures and follows up with guest satisfaction. Support FLHSS management and have a deep understanding of all related processes &amp; procedures for the area. To ensure hazards and malfunctioning, improperly working equipment is reported in a timely manner to management/IT/Engineering. Be confident user of the hotel operational systems such as in HMS, SCM, Alice Conduct the Kids Club Inventory twice per month, monitor the required quantity or stationery items. Train and develop the Kids Club attendants along with the Kids Manager, create a monthly L&amp;D calendar. Create new, unique and interesting activities that draw upon the best cultural, sporting or other offerings of the area in which the hotel is located. Help make the kids offering a point of competitive advantage for the hotel. Ensure any outsourced service provides maintenance standards. To have a complete knowledge of the products and services offered by the hotel, and particularly all the kids club activities in the hotel. Execution of the kids activities programme. Ensure that all activities are performed in a safe environment using proper safety techniques. Use qualified attendants in all areas where relevant qualifications are required, i.e. Lifeguard. Monitor the success of the activities programs through the number of participants and through guests feedback. Make necessary adjustments to maintain top quality, fun filled and original programs for hotel guests and kids. Prepare and circulate clear information to guests of the events offered by the hotel in conjunction with Mandarin Oriental Muscat Concierge. Keep all equipment clean and well maintained in the kids club. Develop and maintain a strong working environment with the other departments. Ensure proper accounting procedures are followed when collecting of charging fees for the Kids club Drive revenues for the department.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>As Kids Club Supervisor, we expect from you:</p><ul><li>Must have at least 2 years experience working with children in a hotel or resort</li><li>Must be fluent in English both written and verbal</li><li>Must be flexible and have a good sense of humour</li><li>Must be a strong communicator</li><li>Obtain the Pediatric First Aid and CPR certification</li><li>Fluent in English both written and verbal</li></ul><p>Our commitment to you</p><ul><li>Learning &amp; Development. Your success is our success. We craft unique learning and development programmes for various stages in your career so that you grow, continuously.</li><li>MOstay. When you work as hard as our colleagues do, it's important to take time off. As a member of the #MOfamily, you can stay with us wherever you go in the world. The MOstay programme offers complimentary nights and additionally attractive rates on rooms for you and your loved ones.</li><li>Heath &amp; Colleague Wellness. Finding the right work-life balance is important. Your wellbeing matters to us. A variety of health benefits and wellness programmes are offered to all our colleagues, globally.</li></ul><p>We're Fans. Are you?</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>1. Assist the Clinical Skills Lab Supervisor in the proper maintenance of the Clinical Skills Lab facility, equipment and materials.</p><p>2. Assist the Clinical Skills Lab Supervisor to conduct training courses for students and teachers at Suhar and Rustaq campus</p><p>3. Assist the Clinical Skills Lab Supervisor in conducting the short courses for the community</p><p>4. Assist with training sessions and lab usage.</p><p>5. Maintain accurate records of sessions, attendance, and equipment use.</p><p>6. Any other duties assigned by the Line Manager.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Master s degree in nursing with minimum of 5 years postmaster or Other Related Health Sciences</li><li>Bachelor s degree in nursing science with 15 years of bedside experience</li><li>3-5 Years of Simulation, Skills Labs, or Related Educational Technology (Preferable)</li><li>5-10 years of medical / nursing education and training.</li><li>Proficiency in English is a must.</li><li>Certified trainer in BLS, ACLS, PALS and other relevant programs preferred</li><li>Certified Modeling &amp; Simulation Professional program preferred, but not mandatory</li><li>Experience with organizing and conduction short courses or workshops.</li><li>Experience in IT support environment</li><li>Experience with Microsoft office</li><li>Experience with audio/visual systems</li><li>Age from: 25 45</li><li>OMANI CANDIDATES ONLY.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>As GEM Supervisor, I will fully comprehend the vision of Six Senses to help people reconnect with themselves, others and the world around them and our values of local sensitivity and global sensibility, crafted experiences, emotional hospitality, responsible and caring, fun and quirky and pioneering wellness. </p><br><p>Sustainability, Wellness and Out of the Ordinary experiences are at the core of everything we do at Six Senses. I will safeguard these pillars and its strategic planning and development and ensure all directives, practices and initiatives are implemented, embraced, adopted within the resort.</p><br><p><strong><u>Duties and Responsibilities </u></strong></p><br><p>As GEM Supervisor, I will assume full responsibility for the efficient operation of the Guest Experience department to provide exceptional products and services within brand operating standards. </p><br><p>The duties and responsibilities will include: </p><br><ul><li>Have a thorough knowledge of all facilities and services offered by the hotel. </li><li>Understand the hotel's policy on guaranteed reservations and no-shows. </li><li>Process advance deposits on reservations. </li><li>Oversee the management of the guest history and profile system in conjunction with the Front Office Manager. </li><li>Support the Director of Rooms and focus on the rejuvenation of the guests’ experience. </li><li>Work in partnership with Front Office, F&amp;B and other departments to ensure guest’s needs are determined /met and oversee the overall smooth operation of guest experience. Ensure that all set policies, procedures, best practices are in place and rigorously enforced. </li><li>Instill a cost-focused philosophy through training and education. </li><li>Operate the property consistent with all legal, statutory and financial requirements and documentation, reporting systems, contractual obligations, security and safety protocols, communications, product and service standards, host management practices and budgetary controls are implemented, reviewed and maintained to ensure the successful operation of the hotel. </li></ul><p><strong><u>Qualifications</u></strong></p><br><p>To execute the position of GEM Supervisor, I must have the required qualifications, technical skills and experience in a similar role in luxury hotels with proven results and includes the following: </p><br><ul><li>High school diploma or equivalent and at least 2 years’ experience in a similar hotel operational setting. Hospitality diploma/degree from a recognized hospitality school is preferred. </li><li>I have an excellent command of written and spoken English, and I am able to live in a remote location for extended periods of time and travel on single status.</li></ul><p><i>The above is intended to provide an overview of the role and responsibilities for a GEM Supervisor at Six Senses Zighy Bay. It is not and does not infer that the above is an inclusive and/or exhaustive list of the duties and responsibilities inherent in the position.</i></p><br><p><i>Six Senses Zighy Bay is an equal opportunity employer. This policy applies to all terms and conditions of employment.</i></p><br><br>At IHG, we’ve made a promise. As one of the world’s leading hotel groups, we’re here to deliver True Hospitality for Good. Making our guests and colleagues feel welcome, cared for, recognised and respected – wherever they are in the world. Want to be part of the journey? </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To execute the procurement process for the assigned materials/services in respective corporate departments to ensure that procurement requirements are met in line with ACWA Power Corporate Procurement Procedure, whilst ensuring internal customer requirements are met in the most timely and cost-efficient manner.</p><p>Collate the required information from the corporate departments and finalize the specifications and requirements for the preparation of RFQ s to be provided to the potential list of suppliers.</p><p>Coordinate the procurement cycle for assigned materials and services under the supervision of the procurement supervisor to ensure the procurement needs are met in a timely and cost-optimized manner.</p><p>Administer terms of purchase in conjunction with relevant stakeholders and legal to ensure all the procured materials and/or services are delivered as per the purchase order (PO) to take any corrective measures in case of noted deviations and ensure that ACWA Power s interests are always protected.</p><p>Provide input based on the analysis of quotations, comparison statements (with emphasis on price, quality, delivery period, terms of payment, etc.), market knowledge and previous contractor evaluations to the Procurement Supervisor for discussion in the tender committee around suitable suppliers.</p><p>Conduct negotiations of quotations with the vendors to ensure that ACWA Power gets the best value for the money they are paying to the vendors.</p><p>Coordinate internal tender committee meetings for assigned purchase orders to enable the approval or modifications of requests for the preparation of purchase orders.</p><p>Enter the information into the system for the generation of a purchase order, and obtain proper approvals, so that the PO can be generated in a timely manner.</p><p>Ensure timely order acceptance from the vendors.</p><p>Implement and coordinate relevant invoice processing activities in liaison with finance, to ensure vendors receive their payments as per the contract terms.</p><p>Analyze vendor performance based on the inputs of internal customers and achievement of the contract obligations to identify the most suitable vendors for any potential work involvement with the Group in the future.</p><p>Provide the support for periodic vendor performance evaluation.</p><p>Support the process of identifying new suppliers to expand the company s preferred supplier database by conducting market research and updating supplier background and credentials, to ensure the Group s supplier database is timely and comprehensively updated with background information.</p><p>Keep abreast of market information about suppliers, dealers, Original Equipment Manufacturers (OEM s) etc. to develop a good network of suppliers that can be contacted for critical requirements.</p><p>Adhere to all relevant organizational and departmental policies, processes, standard operating procedures and instructions so that work is carried out to the required standard and in a consistent manner fully aligning to the local country procurement regulations</p><p>Adhere to all relevant health, safety, security and environmental procedures, instructions and controls and implement the same to vendors/contractors through PO terms so that the safety of employees and environmental compliance can be guaranteed.</p><p>Perform any other duties which the organization may require to be carried out.</p><p>Needs to work closely with Supply Chain teams at the country as well as Corporate level, Plant Operations and Maintenance Teams, IT Team, IMS team, Internal Auditors, Finance Team etc.</p><p>Needs to build a rapport with suppliers, insurance companies, logistics firms, etc.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>A Bachelor s degree holder in Business Administration, Engineering, Materials Management, Logistics and distribution or equivalent.</p><p>3-5 years experience in the same field on local as well as international procurement.</p><p>Ability to look at improvements as well as</p><p>Understanding of the SAP system</p><p>Knowledge of law/regulations and contracts including terms and conditions.</p><p>Ability to understand the material or service with a sourcing perspective.</p><p>Planning and organizing Skills</p><p>Ability to develop relationships with new vendors</p><p>Attention to detail</p><p>Process orientation</p><p></p></section>

<p>We have openings for our prestigious client in Oman; they have openings for Fleet Supervisor &amp; QA QC Lead (Mechanical) Experience in Oil &amp; Gas Oman Location PLEASE NOTE:- 1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY. 2) GCC EXPERIENCE IS A MUST. If interested, please send CV &amp; documents on EMAIL_ADDRESS Please provide below details:- Post Applied:- Current Company:- Current Location:- Current Salary:- Expected Salary:- Total years of Exp:- No of years Gulf Exp:- Notice Period:- Passport number:- Passport Expiry date:- Highest Qualifications:- Date of Birth:- Age:- Below is the open positions: - A) Fleet Supervisor. a) Minimum 5 years of experience as Fleet / Transport Supervisor. B) QA QC Lead (Mechanical). 1) Degree / Diploma in Mechanical Engineering. 2) More than 10 years of experience in Engineering QA/QC work in Petrochemical / Refinery / Oil &amp; Gas or Power Generation industry 3) English language read, write and speaking to IELTS level 4 or equivalent 4) Able to work with computers, work, excel &amp; windows. 5) Knowledgeable on different pipe, gaskets and bolting materials. 6) Knowledgeable on different welding techniques and their quality requirements. 7) Be a qualified welding inspector 8) Able to qualify WPSs and welders 9) Certified ASNT NDT Level II with sound working knowledge of the various NDT techniques 10) Be qualified to interpret radiographs 11) Experienced in ISO 9001:2000 including auditing 12) Develop and implement inspection and test plans 13) Develop and implement QA/QC procedure and ensure activity at the site are as per approved method statement &amp; inspection test plan. 14) Carry out the role of Radiation Safety Officer 15) Set up and maintain quality documents archive 16) Coordinate with the company for inspection &amp; resolution of any quality problem including the closures of Non-Compliance report 17) Manage all QA/QC documents of the contract scope including certificates, Calibrations, test result, inspection request, non-compliance reports &amp; site instruction/observations, permanent material delivered and other QA/QC documents 18) Ensure closure of non-conformance, NCR &amp; site instructions 19) Implement the quality management standards and practices to ensure compliance to the quality scope requirements. 20) Leads inspections recommendations &amp; continuous improvement programs to improve quality, control costs and maintain reliability. 21) Good interpersonal &amp; communication skills 22) Demonstrable leadership, decision making &amp; analytical thinking skills. Please inform your friends &amp; colleagues for the same. Warm Regards, Vinayak Thakkar - Assistant Manager - Recruitment AMExemplar Services Branches: - Surat (HO) | Navi Mumbai | Oman | UAE Mobile: - PHONE_NUMBER Email id: - EMAIL_ADDRESS Website: - www.exemplarworld.com</p><p><strong>Desired Candidate Profile</strong></p><p>1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY. 2) GCC EXPERIENCE IS A MUST.</p><p>A) Fleet Supervisor. a) Minimum 5 years of experience as Fleet / Transport Supervisor.</p><p>B) QA QC Lead (Mechanical). 1) Degree / Diploma in Mechanical Engineering. 2) More than 10 years of experience in Engineering QA/QC work in Petrochemical / Refinery / Oil &amp; Gas or Power Generation industry 3) English language read, write and speaking to IELTS level 4 or equivalent 4) Able to work with computers, work, excel &amp; windows. 5) Knowledgeable on different pipe, gaskets and bolting materials. 6) Knowledgeable on different welding techniques and their quality requirements. 7) Be a qualified welding inspector 8) Able to qualify WPSs and welders 9) Certified ASNT NDT Level II with sound working knowledge of the various NDT techniques 10) Be qualified to interpret radiographs 11) Experienced in ISO 9001:2000 including auditing 12) Develop and implement inspection and test plans 13) Develop and implement QA/QC procedure and ensure activity at the site are as per approved method statement &amp; inspection test plan. 14) Carry out the role of Radiation Safety Officer 15) Set up and maintain quality documents archive 16) Coordinate with the company for inspection &amp; resolution of any quality problem including the closures of Non-Compliance report 17) Manage all QA/QC documents of the contract scope including certificates, Calibrations, test result, inspection request, non-compliance reports &amp; site instruction/observations, permanent material delivered and other QA/QC documents 18) Ensure closure of non-conformance, NCR &amp; site instructions 19) Implement the quality management standards and practices to ensure compliance to the quality scope requirements. 20) Leads inspections recommendations &amp; continuous improvement programs to improve quality, control costs and maintain reliability. 21) Good interpersonal &amp; communication skills 22) Demonstrable leadership, decision making &amp; analytical thinking skills.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Check figures, postings, and documents for accuracy. Organize, secure, and maintain all files, records, cash and cash equivalents in accordance with policies and procedures. Record, store, access, and/or analyze computerized financial information. Classify, code, and summarize numerical and financial data to compile and keep financial records, using journals, ledgers, and/or computers. Prepare, maintain, audit, and distribute statistical, financial, accounting, auditing, or payroll reports and tables. Complete period-end closing procedures and reports as specified. Prepare, review, reconcile, and issue bills, invoices, and account statements according to company procedures. Follow-up and resolve past due accounts and vendor invoices until payment in full is received or resolved. Coordinate tasks and work with other departments; serve as a departmental role model or mentor; assign and ensure work tasks are completed on time and that they meet appropriate quality standards. Report work related accidents, or other injuries immediately upon occurrence to manager/supervisor. Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Speak with others using clear and professional language; prepare and review written documents accurately and completely; answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Education: high school diploma or G.E.D. equivalent.</li><li>Related Work Experience: At least 1 year of related work experience.</li><li>Supervisory Experience: No supervisory experience.</li><li>License or Certification: None</li></ul><p></p></section>

<p>"1) Daily check and deliver farm updated reports to Plot Manager.</p><ol><li><p>Daily monitoring mortality & culls and observing bird’s behavior and feeding & drinking activity.</p></li><li><p>In case of abnormally high mortality informing Vet care Supervisor & concerned Plot Manager immediately."</p></li></ol><p>"4) Instruction to farm forman for necessary tasks, especially after farm visit in written.</p><ol><li><p>Organize washing and cleaning of the uniforms and towels on daily basis.</p></li><li><p>Organize specific operations i.e., grading vaccination, beak trimming, rejects and sex error removal etc."</p></li></ol><p>"7) Applying all bio-security recommendations and supervising the medication if needed and to maintain farm and staff & living hygiene.</p><ol><li><p>Weighing birds on weekly basis as per protocol & keeping records."</p></li></ol><p>"Daily visiting farm and observe following:</p><p>a) Daily Feeding time</p><p>b) Temperature and humidity</p><p>c)Environment of the poultry house</p><p>d) Ventilation parameters</p><p>e) Litter condition</p><p>f) Feeder and nipple lines</p><p>g) Light duration on / off / intensity</p><p>h) Feed and water distribution</p><p>i) Water pressure in pressure tube</p><p>j) Bird’s activity, fleshing, health status</p><p>k) Attendance record "</p><p>"9) Supervising the grading of pullets as per standard operating procedure.</p><ol><li><p>Deciding for feed allocation (increment) based on body weight gain and deviation from std body weight.</p></li><li><p>Keeping optimum level of biosecurity within the farm by organizing the main farm entrance foot dip cleaning and refreshing it with disinfectant.</p></li><li><p>Collecting feed, water & blood samples as required.</p></li></ol><p>"</p><p>"13) Ensure cooling pads clean as per schedule given.</p><ol><li><p>Ensuring feed demand request as per amount to be given to the birds on weekly basis.</p></li><li><p>Ensuring the efficiency of fans, lighting equipment, heaters, and thermometers and measuring scales etc. and getting them calibrated periodically."</p></li></ol><p>"16) Distributing & counting of birds in pens according to the population of the pen. 17) Beak trimming and correction of males and females as required.</p><ol><li><p>Adjustment of feeding ,watering & floor space whenever required.</p></li><li><p>Supervising operations like preparation, cleaning and disinfections between the crops. "</p></li></ol><p>"20) Continuous training and upgrading of new and existing employees and keeping records of training.</p><ol><li><p>Applying the Management policies and technical factors for the optimum performance of the flock.</p></li><li><p>Administering lighting program according to standard procedures."</p></li></ol><p>"23) Observing daily production and taking steps to have the maximum hatching eggs and check daily egg rejection at farm level.</p><ol><li><p>Supervising daily egg collection as per schedule given for auto collection and grading of eggs.</p></li><li><p>Keeping hatch able eggs inside egg store immediately after collection and grading next day before packing in carton boxes."</p></li></ol><p>"26) Daily egg weighing as per procedure and keep record at farm as weekly egg weight.</p><ol><li><p>Dispatch all hatch able and reject eggs to Main egg warehouse store.</p></li><li><p>Strict to Standard operating procedures and ready for audit as per system."</p></li></ol><br><p><strong>Desired Candidate Profile</strong></p><p>A diligent employee who understands the requirements for Poultry Health</p>