oil and gas jobs

<p>We are hiring below mention manpower for Oman.</p><p><span >Candidate should have 6 to 8 years of exp in oil &amp; gas,petrochemical &amp; Refinery with NDT Level - 2 &amp; CSWIP certified.</span></p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<ul><li><p>Provide detailed engineering input during all design phases, including interpretation and challenge of standards. Actively communicate with other disciplines to optimise areas of interface, during the design development, review and check processes. </p></li><li><p>Support design/drawing office personnel with specialist engineering input. </p></li><li><p>Prepare requisitions and technical evaluation of bids for discipline material and equipment sourcing. </p></li><li><p>Ensure equipment Vendors provide timely and quality input into design packages. Review all third-party discipline design work. </p></li><li><p>Ensure design packages meet the relevant safety, environmental and ergonomic standards.</p></li><li><p>Understand the contract quality management system and ensure these requirements are met.</p></li><li><p>Participate in and sometimes lead, discipline design reviews. </p></li><li><p>Conversant with relevant international standards. </p></li><li><p>Experience with Company and/or Shell Group projects and standards (SPs) is strongly preferred.</p></li><li><p>Field experience in construction & commissioning strongly preferred.</p></li><li><p>Experience with Company and/or Shell Group projects and standards (SPs) is strongly preferred</p></li><li><p>Responsible for all day to day activities supporting build program planning and delivery; identifying key issues, constraints & critical path; setting and achieving key milestones; issuing various reports</p></li><li><p>Execute technical support studies as requested.</p></li><li><p>Provide engineering support to Construction and operations as requested.</p></li></ul><p><br></p><p><strong>Other tasks:</strong></p><ol type="1"><li><p>Promoting Group Values, Code of Conduct and associated policies</p></li><li><p>Participating and providing positive contribution to technical, commercial, planning, safety and quality performance of the organization and in accordance with Client, Contractual, regulatory requirements</p></li><li><p>Undertaking any other responsibilities as directed and mutually agreed with the Line Management.</p><p><br></p></li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Civil engineering discipline.</p></li><li><p>For Engineers, a minimum 8 years oil & gas engineering experience</p></li><li><p>Must be PC literate.</p></li><li><p>Shall demonstrate sound general management skills in all aspects of the work, be extremely well organised, methodical.</p></li><li><p>Good interpersonal & communication skills and an extrovert.</p></li><li><p>Shall be able to form, smoothly interact and motivate a team within a matrix type organisation.</p></li></ul><p><br><br></p>

<p>Conduct routine plant rounds and inspect assigned process areas. Support system walk-downs, punch-list clearance and mechanical completion activities. Participate in flushing, blowing, loop checking, leak testing and functional testing during commissioning. Perform equipment and process line-ups according to approved operating procedures. Operate field equipment associated with the reduction shaft/reactor, process gas circuit, Process Gas Heater and material-handling systems. Start and stop pumps, fans and other auxiliaries as instructed by the control room. Monitor equipment for leaks, unusual vibration, noise, temperature or other abnormalities. Read local gauges and instruments and communicate field readings to the Panel Operator. Assist during plant start-up, stabilization and shutdown activities. Support equipment isolation and reinstatement in coordination with operations and maintenance. Maintain field logbooks and operating checklists. Follow strict safety precautions when working around natural gas, hydrogen-rich reducing gas and carbon monoxide. Immediately report unsafe conditions, gas leaks, equipment abnormalities and process deviations. Maintain good housekeeping and operational discipline throughout assigned areas.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 1 year of relevant experience for degree holders or 4 years for diploma holders.</li><li>At least 1 year as a Shift Field Operator in an industrial process plant.</li><li>Experience in HYL/Energiron DRI, Midrex DRI, fertilizer, petrochemical or similar gas-based process plants is preferred.</li><li>Basic understanding of DRI processes, PGH, natural-gas handling and water-treatment systems.</li><li>Ability to understand P&amp;IDs, equipment identification and operating procedures.</li><li>Knowledge of industrial safety, PTW and LOTO practices.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job F-4880-O - Head of Construction (CP8S) <p>Qualifications*</p><br><p>Bachelors Degree in Sciences or Engineering.</p><br><p><strong>Knowledge and/or Experience:-</strong></p><br><p> 10 years experience with Large Projects in Construction related disciplines (e.g., construction, installation, fabrication, execution, completion, hook-up, etc.) in the Oil &amp; Gas Industry, including 2 years of experience in a supervisory role, including acting roles, or oversight of service/vendor personnel. Additional relevant work experience may be substituted for technical education.<br> Good knowledge of Project Execution procedures and field management and techniques including fabrication, welding, lifting, mechanical testing and completions.<br> Experience with Oil and Gas companies, contractors, service companies, or heavy construction companies.</p><br><p><strong>Technical and Business Skills:-</strong></p><br><p> Knowledge of design standards, specifications, codes, and appropriate safety criteria related to major fabrication, transport, installation, brownfield execution, and hook-up, as applicable to the project scope.<br> Knowledge of offshore facilities and structures, onshore facilities, or yard operations as applicable to a project scope.<br> Knowledge of execution methods and risks associated with sour gas and LNG production facilities.<br> Experience working in large scale operating organizations in Operations, Projects, Subsurface, etc.</p><br> <br> <br> </div>

<p>Participate in mechanical completion inspections, system walk-downs and punch-list identification/closure. Verify equipment and piping installation against approved P&amp;IDs and operating requirements. Support flushing, blowing, hydrotesting, gas leak testing, line checking and equipment functional testing. Participate in commissioning and start-up of gas circuits, process equipment, CO removal systems and associated utilities. Perform field line-ups and equipment preparation for plant start-up, shutdown and maintenance. Operate and inspect field equipment including valves, pumps, compressors, heaters, material-handling systems and associated auxiliaries. Monitor field conditions for abnormal temperature, pressure, vibration, leakage, noise or equipment behaviour. Coordinate field actions with the Panel Operator and Shift In-Charge. Guide and supervise Field Operators during routine and non-routine operational activities. Support equipment isolation and de-isolation under approved PTW and LOTO procedures. Respond effectively to gas leaks, trips, equipment failures and other operational emergencies. Maintain accurate field logs and report abnormalities promptly. Ensure safe handling of natural gas, reducing gases, hydrogen-rich gas and carbon monoxide environments. Contribute to improving operating procedures and field checklists based on commissioning and operating experience.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical/Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 5 years' experience for degree holders or 8 years for diploma holders.</li><li>Minimum 2 years as a Senior Field Operator or equivalent.</li><li>Hands-on experience in Tenova HYL/Energiron or Midrex DRI operations.</li><li>Experience in commissioning/start-up of a DRI plant will be a strong advantage.</li><li>Good knowledge of process gas systems, CO removal, PGH, natural-gas systems and plant utilities.</li><li>Strong understanding of PTW, LOTO and gas-safety practices.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job F-4359-O - Construction Lead (Mech /HVAC CP4N) <p>Qualifications*</p><br><p>Bachelors Degree in Sciences or Engineering</p><br><p><strong>Knowledge and/or Experience:-</strong></p><br><p> 8 years specific involvement in project execution with previous leading roles in mechanical/HVAC scope within an EPC contract<br>execution environment in the Oil &amp; Gas Industry, including 1 year of experience in a supervisory role, including acting roles, or oversight of service/vendor personnel. Additional relevant work experience may be substituted for technical education.<br> Good knowledge of Project Execution procedures and field management and techniques including fabrication, welding, lifting,<br>mechanical testing and completions.<br> Experience with Oil and Gas companies, contractors, service companies, or heavy construction companies.<br> Experience working in large scale operating organisations in Operations, Projects, Subsurface etc.</p><br><p><strong>Technical and Business Skills:-</strong></p><br><p> Knowledge of design standards, specifications, codes, and appropriate safety criteria related to major fabrication, transport, installation,brownfield execution, and hook-up, as applicable to the project scope.<br> Knowledge of offshore facilities and structures, onshore facilities, or yard operations as applicable to a project scope.<br> Knowledge of execution methods and risks associated with sour gas<br>and LNG production facilities.</p><br> <br> <br> </div>

<p>Lead and coordinate all DRI plant activities during the assigned shift. Participate in project execution, equipment installation verification, system walk-downs, punch-list clearance and mechanical completion. Review P&amp;IDs, process flow diagrams, operating philosophies, equipment specifications and control narratives. Support pre-commissioning and commissioning activities including flushing, blowing, hydrotesting, leak testing, loop checking and equipment trials. Lead plant start-up, stabilization, normal operation and planned/emergency shutdown activities. Monitor and optimize major process areas including the reduction reactor/shaft furnace, Process Gas Heater (PGH), process gas circuit, CO removal system, natural-gas system, water-treatment facilities and associated utilities. Ensure process parameters remain within operating limits to achieve required DRI/HBI quality and production targets. Coordinate closely with panel operators, field operators, maintenance, electrical, instrumentation, laboratory and other supporting functions. Identify process deviations and equipment abnormalities and lead first-line troubleshooting. Ensure strict compliance with Permit to Work, LOTO, confined-space, gas-safety and other HSE procedures. Maintain accurate shift logs, production reports, abnormality reports and shift handover documentation. Develop and review SOPs, operating checklists and emergency operating procedures. Coach and supervise operators and ensure effective allocation of manpower during shifts. Support continuous improvement initiatives related to plant availability, productivity, energy efficiency and operational reliability.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Chemical Engineering/Science or Diploma in Chemical Engineering or equivalent. Minimum 8 years' relevant experience for degree holders or 12 years for diploma holders. At least 3 years' experience as a Shift Production Supervisor/Shift In-Charge in a DRI or comparable continuous-process facility. Strong preference for experience in Tenova HYL/Energiron and/or Midrex DRI plants. Previous greenfield, brownfield expansion, revamp or commissioning experience is highly desirable. Strong understanding of DRI process chemistry, reducing-gas systems, natural-gas handling, CO removal, water treatment and process utilities. Demonstrated leadership, troubleshooting and shift-management capabilities. Strong commitment to process safety and safe plant operation.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job F-4367-O - Construction Superintendent (Mech /HVAC CP4N) <p>Qualifications*</p><br><p>Diploma</p><br><p><strong>Knowledge and/or Experience:-</strong></p><br><p> 8 years experience of large offshore decks/topside /living quarters in a Mechanical environment.<br> Experience with multinational teams .<br> Good knowledge of Project Execution procedures and field management and techniques including fabrication, welding, lifting, mechanical testing and completions.</p><br><p><strong>Technical and Business Skills:-</strong></p><br><p> Experience with Oil and Gas companies, contractors, service companies, or heavy construction companies.<br> Knowledge of design standards, specifications, codes, and appropriate safety criteria related to major fabrication, transport,<br>installation, brownfield execution, and hook-up, as applicable to the project scope.<br> Knowledge of offshore facilities and structures, onshore facilities, or yard operations as applicable to a project scope.<br> Knowledge of execution methods and risks associated with sour gas and LNG production facilities.<br> Experience working in large scale operating organizations in Operations,Projects, Subsurface, etc.</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job F-4837-6-O - Construction Superintendent (E &amp; IT) <p>Qualifications*</p><br><p>Diploma in Electrical or Instrumentation</p><br><p><strong>Knowledge and/or Experience:-</strong></p><br><p> 8 years experience of large offshore decks/topsides/living quarters in a E&amp;IT supervisory position<br> Experience with multinational teams<br> Good knowledge of Project Execution procedures and field management and techniques including fabrication, welding,lifting, mechanical testing and completions.</p><br><p><strong>Technical and Business Skills:-</strong></p><br><p>Experience with Oil and Gas companies, contractors, service companies, or heavy construction companies.<br> Knowledge of design standards, specifications, codes, and appropriate safety criteria related to major fabrication, transport,installation, brownfield execution, and hook-up, as applicable to<br>the project scope.<br> Knowledge of offshore facilities and structures, onshore facilities,or yard operations as applicable to a project scope.<br> Knowledge of execution methods and risks associated with sour gas and LNG production facilities.<br> Experience working in large scale operating organizations in Operations, Projects, Subsurface, etc.</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job F-4395-O - Construction Superintendent (E &amp; IT) <p>Qualifications*</p><br><p>Diploma in Electrical or Instrumentation</p><br><p><strong>Knowledge and/or Experience:-</strong></p><br><p> 8 years experience of large offshore decks/topsides/living quarters in a E&amp;IT supervisory position<br> Experience with multinational teams<br> Good knowledge of Project Execution procedures and field management and techniques including fabrication, welding,lifting, mechanical testing and completions.</p><br><p><strong>Technical and Business Skills:-</strong></p><br><p>Experience with Oil and Gas companies, contractors, service companies, or heavy construction companies.<br> Knowledge of design standards, specifications, codes, and appropriate safety criteria related to major fabrication, transport,installation, brownfield execution, and hook-up, as applicable to<br>the project scope.<br> Knowledge of offshore facilities and structures, onshore facilities,or yard operations as applicable to a project scope.<br> Knowledge of execution methods and risks associated with sour gas and LNG production facilities.<br> Experience working in large scale operating organizations in Operations, Projects, Subsurface, etc.</p><br> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job F-4358-O - onstruction Superintendent (Mech /HVAC CP8S) <p>Qualifications*</p><br><p>Bachelors Degree in Sciences or Engineering</p><br><p><strong>Knowledge and/or Experience:-</strong></p><br><p> 8 years specific involvement in project execution with previous leading roles in mechanical/HVAC scope within an EPC contract<br>execution environment in the Oil &amp; Gas Industry, including 1 year of experience in a supervisory role, including acting roles, or oversight of service/vendor personnel. Additional relevant work experience may be substituted for technical education.<br> Good knowledge of Project Execution procedures and field management and techniques including fabrication, welding, lifting,<br>mechanical testing and completions.<br> Experience with Oil and Gas companies, contractors, service companies, or heavy construction companies.<br> Experience working in large scale operating organisations in Operations, Projects, Subsurface etc.</p><br><p><strong>Technical and Business Skills:-</strong></p><br><p> Knowledge of design standards, specifications, codes, and appropriate safety criteria related to major fabrication, transport, installation,brownfield execution, and hook-up, as applicable to the project scope.<br> Knowledge of offshore facilities and structures, onshore facilities, or yard operations as applicable to a project scope.<br> Knowledge of execution methods and risks associated with sour gas<br>and LNG production facilities.</p><br> <br> <br> </div>

<p>Carry out preventive, corrective, and breakdown maintenance of plant equipment. Repair, overhaul, install, and dismantle mechanical equipment as required. Maintain pumps, compressors, cooling-water systems, conveyors, HBI machines, and hydraulic systems. Support plant shutdowns, turnarounds, and commissioning activities. Follow HSE, PTW, and LOTO procedures at all times.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Mechanical Engineering with 5 10 years of experience, or ITI/Fitter with 8 12 years. Experience in gas-based DRI plants is preferred. Good knowledge of mechanical equipment maintenance, alignment, pumps, compressors, and hydraulics. Ability to read mechanical drawings and troubleshoot equipment failures.</p>

<p>The Senior Panel Operator will be responsible for controlling and optimizing the DRI facility from the Central Control Room during commissioning, start-up, normal operation and shutdown. This is a critical control-room position requiring strong knowledge of DRI process behaviour, DCS operation, alarms, interlocks, process troubleshooting and emergency response. Key Responsibilities Operate and monitor the DRI plant through the PCS7 Distributed Control System (DCS). Participate in DCS/PLC loop checking, functional testing, interlock testing and Site Acceptance Testing. Monitor major process sections including the reactor/reduction shaft, PGH, process gas circuit, CO removal, HBI system and water-treatment facilities. Execute plant start-up, stabilization, normal-operation and shutdown sequences. Continuously monitor pressure, temperature, gas composition, flow, level and other critical process parameters. Maintain required DRI metallization, carbon content, production rate and product quality. Analyse trends and identify developing process abnormalities before they result in plant trips or production losses. Respond to alarms, trips and interlocks and take corrective action in accordance with approved operating procedures. Coordinate field actions with Senior Field Operators and Field Operators. Support emergency shutdown and plant recovery activities. Optimize consumption of natural gas, electricity, process gases, cooling water and other utilities. Maintain comprehensive control-room logs and shift reports. Support troubleshooting of recurring process and equipment problems. Coach Panel Operators and support their technical development. Work closely with Shift In-Charge, maintenance and instrumentation teams during breakdowns and plant interventions.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 4 years' relevant experience for degree holders or 8 years for diploma holders.</li><li>Minimum 4 years' experience as a Senior Panel Operator or equivalent control-room position.</li><li>Strong preference for candidates with Tenova HYL/Energiron DRI plant experience.</li><li>Strong knowledge of DRI plant start-up, shutdown and emergency operating procedures.</li><li>Hands-on experience with PCS7 or comparable modern DCS platforms.</li><li>Excellent understanding of process alarms, interlocks, trips, permissives and ESD philosophy.</li></ul>

<p>Lead mechanical maintenance activities during the assigned shift. Supervise maintenance teams and coordinate daily maintenance activities. Troubleshoot mechanical equipment failures and implement corrective actions. Execute preventive, predictive, and breakdown maintenance activities. Support plant shutdowns, start-ups, and commissioning activities. Maintain the reliability of critical DRI plant equipment. Coordinate spare parts and maintenance activities through SAP/CMMS. Ensure compliance with safety and maintenance procedures.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in mechanical engineering with 12 15 years of relevant experience; OR Diploma in Mechanical Engineering with 15 18 years of relevant experience.</li><li>Hands-on experience in Gas-Based DRI Plants is required.</li><li>Experience with MIDREX or HYL/ENERGIRON/HYL ZR technology is highly preferred.</li><li>Strong experience with DRI mechanical equipment such as reactors, compressors, water systems, PGH, and HBI machines.</li><li>Strong preventive, predictive, and breakdown maintenance experience.</li><li>Experience with plant shutdowns and cold/hot commissioning.</li><li>Knowledge of SAP/CMMS.</li><li>Strong troubleshooting, leadership, and decision-making skills.</li><li>Good English communication skills.</li></ul>

<p>Shutdown Openings for "QA QC Lead &amp; QC Inspector (Welding) Oil &amp; Gas Shutdown Experience Must Oman Location!!! Dear Candidates, Greetings from AMExemplar Services!!! We have openings for our prestigious client in Oman; they have openings for QA QC Lead &amp; QC Inspector (Welding) Oil &amp; Gas Shutdown Experience Must Oman Location . PLEASE NOTE:- 1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY. 2) GCC SHUTDOWN / TURNAROUND EXPERIENCE IS A MUST. 3) IT IS A 2 TO 3 MONTHS SHUTDOWN If interested, please send CV &amp; documents on EMAIL_ADDRESS Please provide below details:- Post Applied:- Current Company:- Current Location:- Current Salary:- Expected Salary:- Total years of Exp:- No of years Gulf exp as post applied in Oil &amp; Gas / Petrochemical / Refinery:- No of GCC Shutdown / Turnaround as post applied:- Notice Period:- Passport number:- Passport expiry date:- Highest Qualifications:- Date of birth:- Age:-</p><p><strong>Desired Candidate Profile</strong></p><p>Below is the open positions: - A) QA QC Lead (Mechanical) 1) Degree in Mechanical Engineering. 2) Minimum 8+ years of experience in Oil &amp; Gas / Petrochemical / Refinery. 3) GCC shutdown / turnaround experience is a must. 4) CSWIP is a must B) QC Inspector (Mechanical / Piping) 1) Diploma / Degree in Mechanical Engineering. 2) Minimum 5+ years of experience in Oil &amp; Gas / Petrochemical / Refinery. 3) GCC shutdown / turnaround experience is a must. 4) CSWIP is a must Please inform your friends &amp; colleagues for the same.</p>

<p>Role &amp; responsibilities To safely operate, monitor, and maintain CAT 3516H Gas Engine Generator sets during assigned shift at IPGF Power Plant. Ensure maximum gen-set availability, compliance with OEM and IPGF SOP, and zero safety incidents while meeting plant generation targets Preferred candidate profile Gas Engine Generator Power Plant Operations: Conduct pre-start inspections on the CAT 3516H, including checks on lube oil, jacket water, gas fuel pressure, batteries, air filters, and the gas detection system. Carry out safe start-up, synchronization, loading, and shutdown procedures utilizing the EMCP 4.x control panel. Monitor generator set parameters such as kW, power factor, exhaust temperature, jacket water temperature, oil pressure, ignition coil status, and AFR valve position. Acknowledge and troubleshoot EMCP alarms using SPN/FMI codes; implement corrective measures or escalate as necessary. Address common faults associated with the 3516H, including Low Gas Pressure SD, Crank Terminate, Ignition Misfire, High JW Temperature, and CAN Communication Error. Perform operator-level maintenance tasks such as draining gas train filters, inspecting spark plugs, belts, breathers, and verifying sensor functionality. Assist with scheduled maintenance activities, including spark plug replacements, oil changes, valve lash adjustments, and aftercooler cleaning. Ensure adherence to Lockout/Tag out and Permit-to-Work procedures at IPGF. Uphold IPGF HSE regulations, gas safety protocols, hot work, and confined space permits. Engage in toolbox talks, mock drills, and incident investigations. Keep an accurate shift logbook &amp; records, documenting run hours, kWh, gas consumption, alarms..</p>

<p>Graduate in Chemical Engineering, having a total 11+ years of engineering experience in Oil and gas industries, Currently working as a Technical Safety Engineer. Involved in the in the execution of several Front End (FEED) &amp; Detailed Design (DD) projects of the oil and gas systems with activities such as Preparation of Hazardous area classification layout &amp; schedul, HFE-VCA report, HFE-SCE report, FGDEA study, HSE action and concern register,HSSE&amp;SP activity plan,SIMOPS report,etc. Previuosly, was involved in the design of the oil and gas systems such as two-phase separation, pump, flare gas recovery. Preparation of datasheets for two phase separators, relief valves, control valves, pumps etc. Preparation of process deliverables such as Basis of Design, Major line sizing report, line list, equipment list and critical valve list, Tie-in shout down philosophy, POM etc. Familiar with international codes and standards such as API, ASME, PDO/Shell codes of practice DEPs, PDO SPs &amp; GU.</p><p><br></p><p>b</p><ul><li>Provide leadership for procurement activities required to support project delivery, including the execution of purchase orders and sourcing of materials through approved company systems.</li><li>Oversee the complete supply chain lifecycle for each purchase order, ensuring compliance with contract requirements, company procedures, and applicable work practices.</li><li>Lead, guide, and develop sourcing and logistics personnel by establishing effective control mechanisms, strengthening process discipline, and improving operational efficiency.</li><li>Develop and implement supply chain strategies that support continuous improvement across contracting, sourcing, logistics, expediting, inventory, and preservation activities.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Graduate in Chemical Engineering, having a total 11+ years of engineering experience in Oil and gas industries, Currently working as a Technical Safety Engineer. Involved in the in the execution of several Front End (FEED) &amp; Detailed Design (DD) projects of the oil and gas systems with activities such as Preparation of Hazardous area classification layout &amp; schedul, HFE-VCA report, HFE-SCE report, FGDEA study, HSE action and concern register,HSSE&amp;SP activity plan,SIMOPS report,etc. Previuosly, was involved in the design of the oil and gas systems such as two-phase separation, pump, flare gas recovery. Preparation of datasheets for two phase separators, relief valves, control valves, pumps etc. Preparation of process deliverables such as Basis of Design, Major line sizing report, line list, equipment list and critical valve list, Tie-in shout down philosophy, POM etc. Familiar with international codes and standards such as API, ASME, PDO/Shell codes of practice DEPs, PDO SPs &amp; GU.</p>

<p><br></p><p>Industry: Oil &amp; Gas</p><p>Location: Oman</p><p>Position: QC Inspector Multi-Discipline</p><p>Experience: 5 10 Years</p><p>We are looking for experienced Multi-Discipline QC Inspectors with strong experience in the Oil &amp; Gas industry and relevant inspection certifications.</p><p>Key Responsibilities</p><ul><li>Carry out quality inspections and ensure compliance with approved project specifications, drawings, ITPs, method statements, and international standards .</li><li>Monitor and inspect construction activities across multiple disciplines, including mechanical, piping, welding, structural, fabrication, and related works .</li><li>Review and verify Material Test Certificates (MTCs), inspection reports, test results, and quality documentation .</li><li>Coordinate with construction teams, subcontractors, clients, and third-party inspection agencies.</li><li>Conduct inspections at various stages of construction and ensure compliance with approved procedures.</li><li>Identify quality issues, raise NCRs , and follow up on corrective and preventive actions.</li><li>Prepare and maintain Inspection Requests (IRs), quality reports, checklists, and inspection records .</li><li>Ensure proper implementation of ITPs, Quality Control Plans, and project quality procedures .</li><li>Participate in client and third-party inspections.</li><li>Support project teams in resolving technical and quality-related issues.</li><li>Ensure compliance with applicable Oil &amp; Gas industry standards and HSE requirements .</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma / Bachelor's Degree in Engineering or relevant technical qualification.</li><li>5 10 years of relevant QC inspection experience in the Oil &amp; Gas industry .</li><li>B-Gas Certification Mandatory .</li><li>CSWIP Certification Mandatory .</li><li>Strong knowledge of multi-discipline inspection and quality control procedures.</li><li>Experience in piping, welding, mechanical, structural, fabrication, and construction inspection .</li><li>Good knowledge of relevant international codes and standards .</li><li>Ability to read and interpret engineering drawings, specifications, ITPs, and method statements.</li><li>Strong documentation, reporting, and coordination skills.</li><li>GCC / Aramco-approved project experience will be an added advantage.</li><li>B-Gas + CSWIP Additional certifications such as NACE/AMPP, BGAS-CSWIP, ASNT/NDT, or other relevant QC certifications will be an advantage.</li></ul>

<p>PRINCIPAL ACCOUNTABILITIES</p><p>1. Carry out interpretation of 2D and 3D seismic data from the historical seismic databank and from new data received from seismic surveys. Identifies subsurface structure/trapping mechanism and reservoir distribution utilizing geophysical software packages such as Petrel, Geo-Graphix, DSD etc.</p><p>2. Generating plausible geophysical and geological concepts for leads and prospects in all possible plays, with appropriate risks, volume and commercial analysis and in support of a growing inventory of exploration portfolio.</p><p>3. Establish and maintain up-to-date Exploration Prospect Portfolio for all prospects for all levels, shallow to deep plays.</p><p>4. Identify new oil and gas prospects based on comprehensive technical work mainly Geophysical and Geological, from a regional prospective to block and field/prospect level.</p><p>5. Perform detail evaluation of identified prospect to progress to well proposal, presenting to the Management and shareholders to seek approval to drill Exploration wells in which clear conclusions and recommendations are required to the management to make decisions.</p><p>7. Work closely with Exploration geologist and reservoir engineer on analysis work of new found traps to ascertain the most likely locations of reservoir tops and subsequent locations of potential wells.</p><p>8. Identify optimal drilling locations using knowledge of 3D seismic interpretation and knowledge of regional and prospect specific petroleum systems.</p><p>9. Seamless coordination of all exploration-related operations between relevant internal and external parties.</p><p>10. Involvement on Tender documentation preparation and evaluation of bids for any study pertaining seismic; such as seismic data acquisition, survey plan, Processing, Reservoir Characterization, VSP, prospect identification etc.</p><p>11. Follow up and Supervise specialist or outsourced studies of seismic evaluation.</p><p>12. Stays up to date with current developments in seismic and geophysical mapping techniques and software. The role will also involve participating in the assessment of new technology, methodologies and workflows</p><p>13. Provide mentorship, guidance and control as required to junior Daleel geoscience staff with respect to geophysical methods and evaluation procedures.</p><p>14. Follows and promotes all QHSSE policies of the Company at all times.</p><p>KEY CHALLENGES:</p><p>Ability to work in both; Exploration and Development environments</p><p>Supporting day-to-day operations on well delivering for Exploration/Appraisal wells</p><p>Works closely with other team members as and when required.</p><p>To complete the company KPI by drilling required number of Exploration wells per year.</p><p>Ability to interact with internal and external clients</p><p><strong>Desired Candidate Profile</strong></p>JOB KNOWLEDGE, SKILLS AND EXPERIENCE<br>Minimum Academic Qualifications: Bachelor's degree in Geophysics or a related discipline<br>Minimum Work experience: At least 12 years experience in Geophysics or Seismic Interpretation in a recognized oil company and integration of seismic, well and other data.<br>Knowledge of Oman plays and Petroleum systems.<br>Proven Exploration record in finding new oil and gas resources.<br>Experience upstream E&amp;P professional with familiarity in petroleum systems analysis, well data analysis, geological interpretation and prospect evaluation.<br>Maturation and development of new prospects.<br>Experience in workstation-based seismic interpretation from regional to prospect level.<br>Awareness of seismic acquisition and processing<br>An understanding of principles of rock physics and quantitative seismic interpretation would be desirable.<br>Must be a technically established engineer in the Geophysics and well skilled in mentoring and motivating new Geophysicist.

<p><br></p><p>Industry: Oil &amp; Gas</p><p>Location: Oman</p><p>Position: QC Inspector Painting &amp; Coating</p><p>Experience: 7 10 Years</p><p>We are looking for an experienced Quality Control Inspector Painting &amp; Coating with strong experience in the Oil &amp; Gas industry .</p><p>Key Responsibilities</p><ul><li>Inspect and monitor surface preparation, blasting, painting, and coating activities as per approved specifications and procedures.</li><li>Conduct inspection of coating works at various stages, including surface preparation, primer, intermediate, and final coats.</li><li>Verify environmental conditions such as temperature, humidity, dew point, and surface temperature before and during coating application.</li><li>Perform and document coating inspection tests, including DFT, WFT, adhesion, holiday detection, and surface profile checks.</li><li>Verify that paints, coatings, consumables, and application methods comply with approved specifications and manufacturer requirements.</li><li>Review Material Test Certificates (MTCs), technical datasheets, batch certificates, and inspection records .</li><li>Raise and follow up on NCRs, inspection reports, and quality documentation where required.</li><li>Ensure all painting and coating activities comply with project specifications, approved ITPs, method statements, and applicable international standards.</li><li>Coordinate with the client, third-party inspectors, contractors, and site teams during inspection activities.</li><li>Maintain accurate inspection records and prepare daily/weekly quality reports.</li><li>Ensure compliance with Oil &amp; Gas project quality and HSE requirements .</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma / Bachelor's Degree in Engineering or relevant technical qualification.</li><li>5 10 years of relevant experience in Painting &amp; Coating Inspection within the Oil &amp; Gas industry .</li><li>B-Gas Certification is mandatory.</li><li>Strong knowledge of surface preparation, abrasive blasting, coating application, and inspection techniques.</li><li>Knowledge of relevant coating standards and specifications such as NACE/AMPP, SSPC, ISO, and project-specific requirements .</li><li>Experience with inspection instruments such as DFT gauges, surface profile gauges, dew point meters, holiday detectors, and adhesion testers .</li><li>Ability to read and understand coating specifications, drawings, ITPs, and method statements.</li><li>Strong reporting and documentation skills.</li><li>GCC / Aramco-approved project experience will be an added advantage.</li></ul>