oil and gas jobs

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Superintendent to supervise and manage site execution of all instrumentation related precommissioning and commissioning activities on a large LNG facility. The role is fully site based and focuses on field supervision, workforce coordination, safety, and execution readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <h4>Key responsibilities</h4> <ul> <li>Supervise and coordinate instrumentation PCC field activities in line with approved procedures and schedules</li> <li>Manage and direct instrument technicians, supervisors, and subcontractors on site</li> <li>Ensure instrumentation systems are ready for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Oversee execution of: <ul> <li>Instrument installation checks and verification</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer installation and commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) status and ensure punch list closure for instrumentation scope</li> <li>Coordinate daily activities with construction, electrical, automation, operations, HSE, and QA/QC teams</li> <li>Support DCS, ESD, F&G, and PLC testing in coordination with vendors and commissioning engineers</li> <li>Ensure strict compliance with: <ul> <li>PTW systems</li> <li>SIMOPS requirements</li> <li>HSE procedures and risk assessments</li> </ul> </li> <li>Monitor field progress, productivity, constraints, and safety performance</li> <li>Report daily and weekly status to the Instrumentation Lead / Commissioning Manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong><br> Diploma or Bachelor’s degree in Instrumentation, Control, Electrical, or related discipline</p> <p><strong>Experience</strong><br> Minimum 12 years experience in oil & gas or LNG projects<br> Proven experience as Instrumentation Superintendent or Senior Instrument Supervisor during precommissioning and commissioning phases<br> Strong hands-on site experience on large EPC projects<br> Extensive exposure to LNG or gas processing facilities<br> Candidates without direct site supervision responsibility in PCC phases will not be considered.</p> <p><strong>Technical expertise</strong><br> Strong practical knowledge of: <ul> <li>Instrumentation PCC workflows and field execution</li> <li>Loop checks, cause & effect testing, calibration, and valve testing</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> </ul> Ability to read and work from: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop drawings and hookups</li> <li>Commissioning check sheets and test packs</li> </ul> </p> <p><strong>Supervisory & professional skills</strong><br> Strong field leadership and workforce management capability<br> Safety driven mindset with solid PTW and SIMOPS experience<br> Practical, hands-on problem solver<br> Clear communication in English<br> Comfortable working in demanding, multicultural site environments</p> <p><strong>Ideal background</strong><br> EPC contractor commissioning background<br> LNG precommissioning and commissioning field leadership experience<br> Middle East project experience (preferred)</p></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<p><br></p><p>Industry: Oil &amp; Gas</p><p>Location: Oman</p><p>Position: QC Inspector Painting &amp; Coating</p><p>Experience: 7 10 Years</p><p>We are looking for an experienced Quality Control Inspector Painting &amp; Coating with strong experience in the Oil &amp; Gas industry .</p><p>Key Responsibilities</p><ul><li>Inspect and monitor surface preparation, blasting, painting, and coating activities as per approved specifications and procedures.</li><li>Conduct inspection of coating works at various stages, including surface preparation, primer, intermediate, and final coats.</li><li>Verify environmental conditions such as temperature, humidity, dew point, and surface temperature before and during coating application.</li><li>Perform and document coating inspection tests, including DFT, WFT, adhesion, holiday detection, and surface profile checks.</li><li>Verify that paints, coatings, consumables, and application methods comply with approved specifications and manufacturer requirements.</li><li>Review Material Test Certificates (MTCs), technical datasheets, batch certificates, and inspection records .</li><li>Raise and follow up on NCRs, inspection reports, and quality documentation where required.</li><li>Ensure all painting and coating activities comply with project specifications, approved ITPs, method statements, and applicable international standards.</li><li>Coordinate with the client, third-party inspectors, contractors, and site teams during inspection activities.</li><li>Maintain accurate inspection records and prepare daily/weekly quality reports.</li><li>Ensure compliance with Oil &amp; Gas project quality and HSE requirements .</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma / Bachelor's Degree in Engineering or relevant technical qualification.</li><li>5 10 years of relevant experience in Painting &amp; Coating Inspection within the Oil &amp; Gas industry .</li><li>B-Gas Certification is mandatory.</li><li>Strong knowledge of surface preparation, abrasive blasting, coating application, and inspection techniques.</li><li>Knowledge of relevant coating standards and specifications such as NACE/AMPP, SSPC, ISO, and project-specific requirements .</li><li>Experience with inspection instruments such as DFT gauges, surface profile gauges, dew point meters, holiday detectors, and adhesion testers .</li><li>Ability to read and understand coating specifications, drawings, ITPs, and method statements.</li><li>Strong reporting and documentation skills.</li><li>GCC / Aramco-approved project experience will be an added advantage.</li></ul>

<p>UT L 2 Technician 15 Nos, 7-9 Yrs, Diploma Mech, PCN 3.1/3.2/3.8/3.9, Oil &amp; Gas Offshore, Piping, Butt Welds, T/K/Y Joints, API RP 2X, Mock-up. Senior UT L2: 3 Nos, 10-11 Yrs, B.Sc Mech, Cross-checking &amp; verification of UT examination, API RP 2X Required Candidate profile PCN 3.1/3.2/3.8/3.9, strong Oil &amp; Gas experience in piping, butt welds and T/K/Y joints. API RP 2X knowledge. Senior candidates must handle independent UT result cross-checking and verification</p><p><strong>Desired Candidate Profile</strong></p><p>PCN 3.1/3.2/3.8/3.9, strong Oil &amp; Gas experience in piping, butt welds and T/K/Y joints. API RP 2X knowledge. Senior candidates must handle independent UT result cross-checking and verification</p>

<ul><li><p>Analyze project specifications, blueprints, and technical documents to accurately determine the scope of mechanical or electromechanical work required.</p></li><li><p>Quantify material, labor, and equipment needs, translating technical drawings into detailed bills of materials and resource estimates.</p></li><li><p>Develop comprehensive cost breakdowns, including direct and indirect costs, overhead, and profit margins, ensuring competitive and profitable bids.</p></li><li><p>Collaborate with design engineers, project managers, and procurement teams to gather all necessary information and validate estimates.</p></li><li><p>To prepare accurate and competitive electromechanical cost estimates and tender submissions for Oil & Gas, EPC, brownfield, maintenance and modification projects.</p></li><li><p>Responsible in providing cost estimates for Projects and/or Services, Responsible for building the Direct Costs estimate and give guidance to Activity Allowance issues.</p></li><li><p>Responsible for producing the Control Cost Estimate at 80% of Project Progress. Inputting payments in Company SAP system that includes creating service entries and technical release. Liaising and providing commercial/contractual awareness to other disciplines (Engineering, Operation, construction, etc) when required.</p></li><li><p>Review of Bids and Quotations from Vendors on completeness and to be included in Direct costs</p><p><br></p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in <strong>Mechanical Engineering</strong>, <strong>Electrical Engineering, Electromechanical Engineering</strong>, or a related technical field. Degree in a relevant engineering discipline and membership of internationally accepted applicable professional Institute.</p></li><li><p>Minimum of 10 years of experience in cost estimation for <strong>mechanical </strong>or <strong>electromechanical </strong>projects and with a proven track record of successful project bids.</p></li><li><p>Preferable familiar with Company or Shell standards and guidelines Fully conversant with International Design & Construction Standards for the Oil & gas industry. Skills in SAP, SAP BW, CCES, Candy, Primavera and other Cost control and Estimating systems</p></li><li><p>Proficiency in using estimation software (e.g., CostX, Sage Estimating, Procore) and CAD tools (e.g., AutoCAD, SolidWorks). or similar tools is essential for efficiency.</p></li><li><p>Excellent MS Excel skills with strong analytical and commercial capabilities.</p></li><li><p>The candidate should have relevant experience in Oil & Gas / EPC / Engineering & Construction projects,</p></li><li><p>Excellent understanding of electrical and mechanical construction methodology</p></li><li><p>Energetic person who is self-starting, takes initiatives, has a high degree of personal integrity, high standard of business ethics, good commercial acumen with adequate computer skills (familiar with Microsoft Windows, Microsoft Word and Microsoft Excel as a minimum).</p></li><li><p>Can actively train and encourage the development of Omani personnel</p></li><li><p>Both accuracy and consistency are good personal requirements.</p></li><li><p>Be able to challenge Cost Estimates prepared by others and Third Party.</p></li><li><p><strong>Oil & Gas/EPC experience mandatory & Oman / GCC Oil & Gas experience is preferred.</strong></p></li><li><p><strong>PDO project experience will be an added advantage.</strong></p></li><li><p><strong>Additional qualification in Quantity Surveying, Cost Engineering or Project Management will be an advantage.</strong></p></li></ul>

<p>Candidates Must Have 5+ Yrs. Experience In Civil Construction For Oil &amp; Gas Projects</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates Must Have 5+ Yrs. Experience In Civil Construction For Oil &amp; Gas Projects</p>

<p>The Production Delivery Supervisor oversees the daily operations of oil field production, ensuring that safety, efficiency, and output targets are met. Key responsibilities include managing production schedules, coordinating with cross-functional teams, and ensuring adherence to both operational and HSE regulatory standards. The role involves monitoring equipment performance, troubleshooting issues, supervising field personnel, and ensuring timely and safe delivery of products. The supervisor is also responsible for implementing and enforcing HSE protocols, conducting safety audits, and leading emergency response efforts when necessary. Additionally, they play a key role in promoting a culture of safety and environmental responsibility within the team.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><h2>Main tasks and responsibilities</h2><ul><li>Provides extend well testing appraisals for production of the tight gas reservoirs in the Surface Facilities B60 - Off Plot.</li><li>Avoid excessive flaring of significant volumes of gas while predict full field production profiles.</li><li>Gather EWT data to support on the reduction Key depletion planning uncertainties identified at the outset of appraisal to a level sufficient to inform an investment decision. Ensure the EWT testing improves confidence in predictions of production profiles for the range of full field development wells.</li><li>Reveal the potential full field development design and startup concerns related to formation of hydrates due to gas expansion at the wellhead along with other potential integrity risks due to high chlorides content and the presence of minor H2S levels</li><li>Ensure the changing fluid chemistry helps in redefining the fluid basis of surface facilities design to optimize operability of the full field development.</li><li>Wells custodianship Receiving all handovers from WS (hoist), sending handovers to construction for hook up. Preparing wells handovers to WS for workover and following up with construction for un-hook &amp; re-hook up activity. In case well relates to OHL, to follow up with maintenance electrical team for power isolation/de-isolation as part of hook up</li><li>Follow up new wells hook up till walk down, attend walk down and record any punch points captured and follow up the closure of punch points. Follow up with surface equipment (VSD &amp; Surface cable) delivery and make sure that construction has marked VSD location to be offloaded correctly</li><li>Other off plot activities: Follow up with construction &amp; commissioning teams (along with support of PDTL) on TL, MSV, produced water lines, export lines/manifolds, etc and attend their walk down, PSSR &amp; commissioning. Participate in off plot shut down activities planned &amp; non-planned.</li><li>Supervise field personnel and ensure full compliance with HSE regulations. Implement and maintain HSE policies, procedures, and best practices. Conduct regular safety audits, risk assessments, and emergency drills. Promote safety awareness and lead incident investigations, providing corrective actions. Report production and HSE metrics to senior management.</li><li>Flexible to act any of off plot tasks like production delivery team lead, water section supervisor for some time if required.</li><li>Act as accountable &amp; responsible on maintaining workflow and managing to update any required documentation (handovers form, MCC, other reports). Once delegation is done a proper &amp; documented handover shall be given on time.</li></ul><h2>Key interactions</h2><ul><li>Internal: Upstream</li><li>External: Contractors, Vendors &amp; Suppliers</li></ul><h2>Notable Working Conditions</h2>Field Operations and office environment, Moderate to intensive computer screen use.<p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's in engineering, or related.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Bachelor Supervisor 5-7 years of relevant experience</li><li>Experience in relevant position in EWT (Extended Well Testing)</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Experience with well Surface Well Testing methods: Surface Test Tree, Surface Safety Valve, piping, Data Header, Choke Manifold, Heat Exchanger, 3 Phase Separator, Surge or Atmospheric Tank, Transfer Pump, Chemical Injection Pump, Emergency Shutdown System, Burner Boom/Burner Head or Flare Stack, Lab Container and Workshop.</li><li>Strong management &amp; leadership skills to lead all aspects of the Operation &amp; Maintenance process &amp; should be able to work collaboratively with all involved.</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Excellent interpersonal skills and multi-cultural sensitivity</li><li>Computer literate with expertise in MS Office.</li><li>EWT facility to perform</li><li>Surface Operations Off Plot</li><li>Field Production Operation</li><li>Water Treatment</li></ul>

<p>The Senior Cost Estimation Engineer will be responsible to analyze project scope, engineering documents, quantities, and material take-offs. Perform cost analysis, benchmarking, and maintain estimating databases and cost forecasting. Designing the future. Transforming the world Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.</p><p>What we can offer</p><ul><li>Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.</li><li>Workmen s Compensation : Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.</li><li>Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li></ul><p>Typical responsibilities</p><ul><li>Prepare and review CAPEX/OPEX cost estimates (Class 5 to Class 1) for Oil &amp; Gas projects.</li><li>Analyze project scope, engineering documents, quantities, and material take-offs.</li><li>Develop estimate basis, cost breakdowns, contingencies, and risk assessments.</li><li>Perform cost analysis, benchmarking, and maintain estimating databases.</li><li>Support tender evaluations, vendor quotations, budgeting, and cost forecasting.</li><li>Collaborate with project teams and stakeholders on funding, estimates, and investment decisions.</li><li>Contribute to continuous improvement of estimating processes and mentor junior engineers.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Experience:</p><ul><li>Bachelor of Engineering in related discipline</li><li>Minimum 12 years of experience in Oil and Gas industry with 5 years of experience in similar role</li><li>Experience in Refinery projects.</li><li>Skilled in MS Office applications.</li></ul>

<p><br></p><p>Industry: Oil &amp; Gas</p><p>Location: Oman</p><p>Position: QC Inspector Civil</p><p>Experience: 5 10 Years</p><p>We are looking for an experienced QC Inspector Civil with strong experience in Oil &amp; Gas / EPC projects to ensure that all civil and construction activities comply with approved project specifications, standards, and quality requirements.</p><p>Key Responsibilities</p><ul><li>Conduct inspections of civil and construction activities as per approved ITPs, drawings, specifications, and method statements .</li><li>Inspect earthworks, excavation, backfilling, grading, compaction, foundations, concrete, rebar, formwork, grouting, and structural works .</li><li>Monitor concrete works, including concrete pouring, slump tests, cube tests, curing, and related inspections .</li><li>Inspect reinforcement steel, embedded items, anchor bolts, formwork, and foundations prior to concrete placement.</li><li>Verify incoming construction materials and review relevant Material Test Certificates (MTCs) and test reports.</li><li>Coordinate with site engineers, construction teams, subcontractors, client representatives, and third-party inspectors.</li><li>Raise Inspection Requests (IRs) and maintain inspection records and quality documentation.</li><li>Identify non-conformities and assist in raising and closing NCRs and corrective actions.</li><li>Ensure compliance with applicable international standards, project specifications, and Oil &amp; Gas client requirements .</li><li>Review and maintain quality records, checklists, test reports, and inspection documentation.</li><li>Participate in client and third-party inspections.</li><li>Ensure all civil activities are executed in accordance with approved procedures and project quality requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma / Bachelor's Degree in Civil Engineering or relevant technical qualification.</li><li>5 10 years of relevant QC Civil Inspection experience in the Oil &amp; Gas / EPC industry .</li><li>Strong knowledge of civil construction and inspection activities.</li><li>Hands-on experience with concrete, rebar, foundations, earthworks, excavation, backfilling, compaction, grouting, and structural works .</li><li>Good knowledge of relevant ASTM, ACI, BS, ISO, and project-specific standards .</li><li>Ability to read and interpret civil drawings, specifications, ITPs, and method statements .</li><li>Strong knowledge of QA/QC documentation and inspection procedures.</li><li>Good communication and reporting skills.</li><li>GCC experience is preferred.</li><li>Aramco / ADNOC / PDO-approved project experience will be an added advantage.</li><li>Preferred Certifications CSWIP / NACE-AMPP / BGAS / ASNT-NDT / other relevant QC certifications will be an advantage, depending on project requirements.</li></ul>

<p>An HSE Trainer for oil and gas develops and delivers health, safety, and environmental training programs, conducts worker safety inductions, and ensures operations comply with energy sector regulations and high-risk site standards like PTW, H2S safety, and emergency response</p><p><strong>Key Responsibilities</strong></p><ul><li><strong>Training Delivery:</strong> Run classroom and on-site sessions covering site inductions, permit-to-work (PTW), confined space entry, and working at heights.</li><li><strong>Program Design:</strong> Create specialized training materials, presentations, and toolbox talk content tailored to upstream/downstream oil and gas risks.</li><li><strong>Competency Assessment:</strong> Evaluate worker knowledge, identify skills gaps, and track training matrices for employees and contractors.</li><li><strong>Safety Drills:</strong> Facilitate emergency mock drills (fire, H2S release, spill response) and review safety procedures.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><strong>Education:</strong> Bachelor s degree in Occupational Health and Safety, Environmental Science, or Engineering.</li><li><strong>Experience:</strong> 5+ years in HSE, with specific training or field experience in the oil, gas, or petrochemical sector.</li><li><strong>Certifications:</strong> NEBOSH (IGC/Diploma), IOSH, OSHA Trainer, and a recognized Train-the-Trainer (TTT) certificate.</li><li><strong>Core Skills:</strong> Strong public speaking, knowledge of hazard identification (HAZID/JSA), and profound familiarity with lifesaving rules in oilfields'</li></ul>

<p>Chief Finance Officer (CFO) Oil &amp; Gas | OMAN</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Min 10+ yrs preferably in the Oil &amp; Gas industry.</li><li>CA or MBA in Finance (or equivalent finance qualification).</li><li>Strong leadership, analytical, and communication skills.</li><li>Nationality: Indian</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>EMPLOYEE JOB DESCRIPTION</b></p> <p>JOB PURPOSE:</p> <p>The Industrial Specialist will play a key role in identifying, developing, and securing new business opportunities aligned with our shipyard workshop capabilities. The candidate will focus on industrial and oil &amp; gas sectors, generating qualified leads and supporting the growth of our fabrication, mechanical, machining, steel structure, and maintenance services.</p> <p>KEY ACCOUNTABILITIES:</p> <p>Description</p> <p>Business Development &amp; Lead Generation</p> <p>Identify and qualify new business leads in the industrial and oil &amp; gas sectors.</p> <p>Map market opportunities relevant to the shipyard s workshop capabilities (fabrication, steel works, mechanical works, blasting &amp; painting, machining, valves, etc.).</p> <p>Establish and maintain relationships with key decision-makers, contractors, EPC companies, and industrial operators.</p> <p>Market Research &amp; Analysis</p> <p>Monitor industry trends, competitor activities, and project announcements.</p> <p>Provide regular market intelligence reports and recommend strategies for increasing market penetration.</p> <p>Client Engagement &amp; Coordination</p> <p>Conduct client visits, presentations, and capability introductions.</p> <p>Coordinate with internal technical teams to prepare proposals, quotations, and technical submissions.</p> <p>Ensure client requirements are clearly communicated and aligned with workshop capacity and technical limits.</p> <p>Proposal &amp; Commercial Support</p> <p>Support tender processes by gathering technical inputs, pricing, and documentation.</p> <p>Assist in preparing commercial offers that reflect the shipyard s standards, capabilities, and pricing model.</p> <p>Sales Administration</p> <p>Maintain an updated CRM or lead tracking system.</p> <p>Prepare weekly and monthly reports on leads, activities, and pipeline status.</p> <p>Health, Safety, &amp; Environment</p> <p>Ensure compliance to all relevant health, safety and environmental management procedures and controls within the logistics function to guarantee employee safety, compliance, delivery of high quality products/services and a responsible environmental attitude.</p> <p> COMMUNICATIONS &amp; WORKING RELATIONSHIPS:</p> <p>Internal:</p> <p>Commercial Department Regular coordination on leads, proposals, pricing, and reporting.</p> <p>Workshops / Operations Teams Aligning client requirements with technical capabilities, capacity, and delivery timelines.</p> <p>Engineering / Technical Teams Gathering technical inputs for quotations, clarifications, and feasibility assessments.</p> <p>Finance &amp; Contracts Supporting cost estimates, commercial terms, and contract reviews.</p> <p> External:</p> <p>Clients &amp; Prospective Customers Developing relationships, presenting capabilities, and identifying business opportunities.</p> <p>EPC Contractors &amp; Industrial Operators Engaging for project inquiries, partnerships, and prequalification processes.</p> <p>Suppliers &amp; Service Providers Coordinating for pricing support, outsourced services, or value-added solutions.</p> <p>Industry Stakeholders &amp; Regulators Staying informed of market trends, projects, and compliance-related updates.</p> <p> QUALIFICATIONS, EXPERIENCE &amp; SKILLS:</p> <p>Minimum Qualifications:</p> <p>Bachelor s Degree or an equivalent qualification in Engineering filed</p> <p>Minimum Experience:</p> <p>Minimum 3 years of experience in a commercial or business development role in the industrial, oil &amp; gas, or marine engineering sectors.</p> <p> Job-Specific Knowledge &amp; Skills:</p> <p>Industrial &amp; Oil &amp; Gas Market Knowledge Understanding market dynamics, key players, and project opportunities relevant to shipyard capabilities.</p> <p>Lead Generation &amp; Business Development Ability to identify, qualify, and develop commercial leads into tangible opportunities.</p> <p>Technical Understanding of Workshop Capabilities Familiarity with fabrication, mechanical works, steel structures, machining, and maintenance services to match client requirements.</p> <p>Commercial &amp; Proposal Skills Preparing quotations, offers, and proposals aligned with client needs and organizational standards.</p> <p> BEHAVIORAL COMPETENCIES</p> <p>Market awareness (industrial &amp; oil and gas sectors).</p> <p>Strong networking and client engagement skills.</p> <p>Technical understanding of workshop-related services.</p> <p>Organized, proactive, and target oriented.</p> <p>Strong commercial acumen and reporting ability.</p> <p><br></p></div></section>

<p>We are hiring Safety Officer for oman for Long Term with 3 to 5 years of experience in Oil &amp; Gas.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidate must have 5 to 6 years of experience in Oil &amp; Gas. Education - Technical Diploma + Nebosh.</p>

<ol><li><p>Oversee the planning, preparation and execution of <strong>onshore fabrication activities</strong> from yard execution through load-out.</p></li><li><p>Manage the execution of <strong>Compression Platform Complex fabrication scope</strong> while ensuring Safety, Quality and Schedule objectives are achieved.</p></li><li><p>Supervise and control <strong>Contractor/Subcontractor activities</strong> related to topsides fabrication and Mechanical Completion.</p></li><li><p>Review <strong>constructability and technical compliance</strong> of engineering deliverables against project requirements and applicable standards.</p></li><li><p>Monitor <strong>construction progress and quality</strong>, identify critical issues or deviations, and recommend corrective actions.</p></li><li><p>Coordinate with Contractors/Subcontractors on <strong>Mechanical Completion, Pre-commissioning and Commissioning</strong> activities.</p></li><li><p>Review contractor progress reports and highlight <strong>critical problems, schedule drifts and execution issues</strong>.</p></li><li><p>Lead and participate in <strong>Risk Assessments, Pre-Job Meetings and technical meetings</strong> as required.</p></li><li><p>Maintain effective interfaces between <strong>Company, Contractor and Engineering teams</strong> to resolve construction and execution issues.</p></li><li><p>Capture and implement <strong>lessons learned</strong> from previous and current projects to improve construction execution.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Bachelor’s Degree in <strong>Science or Engineering</strong>.</p></li><li><p>Minimum <strong>10 years of experience</strong> in large-scale Oil & Gas construction-related projects.</p></li><li><p>Minimum <strong>2 years of supervisory/leadership experience</strong>, including acting roles or oversight of service/vendor personnel.</p></li><li><p>Strong experience in <strong>construction, fabrication, installation, execution, completion and/or hook-up</strong>.</p></li><li><p>Good knowledge of <strong>fabrication, welding, lifting, mechanical testing and completions</strong>.</p></li><li><p>Experience with <strong>topsides fabrication, Mechanical Completion and construction execution</strong>.</p></li><li><p>Strong <strong>Contractor/Subcontractor management</strong> and project interface experience.</p></li><li><p>Knowledge of <strong>constructability, project execution procedures, field management, design standards, specifications and applicable codes</strong>.</p></li><li><p>Experience/exposure to <strong>onshore facilities, offshore facilities/structures and/or yard operations</strong>.</p></li><li><p>Knowledge of execution methods and risks associated with <strong>LNG and sour gas production facilities</strong>.</p></li><li><p>Experience working with <strong>Oil & Gas operating companies, EPC contractors, service companies or heavy construction companies</strong>.</p></li><li><p>Candidates with experience in major Oil & Gas operating companies or leading EPC/fabrication contractors will be preferred.</p></li></ol>

<p><strong>1 ) JOB DESCRIPTION SITE MANAGER (SCADA ENGINEER)</strong></p><p>Key Responsibilities:</p><p>Supervision: Coordinate and manage onsite Engineers, Technicians, and Sub-contractors.</p><p>Planning: Monitor project schedules, track milestones, and manage resource allocation.</p><p>Communication: Liaise with client engineers on site and contract manager regarding progress reports.</p><p>Tools &amp; Materials: Arrange and manage tools, equipment, and materials to ensure smooth execution of all site activities.</p><p>SCADA Design &amp; Implementation: SCADA configuration, including HMI graphics, dashboard design, history and alarm management.</p><p>Programming &amp; Configuration: Program RTUs and PLCs including I/O Mapping to monitor and control remote assets (Wells, Manifolds, Tanks, Solar Systems etc.).</p><p>Communication &amp; Protocols: Configure communication links (Radio, GSM/4G/5G) using industrial protocols like Modbus Serial/TCP, DNP3 etc.</p><p>System Compliance: Ensure all control systems comply with safety regulations and operational standards and report any safety/operational concerns to the Site Manager.</p><p>Documentation: Maintain accurate records of installation, maintenance, and configurations for RTU/SCADA.</p><p>HSSE Compliance: Ensure proper use of PPE at all times and comply with the necessary OPAL regulations for work in Oil &amp; Gas Environments.</p><p>Required Skills &amp; Qualifications:</p><p>Education: Bachelors degree in Electrical, Electronics, or Instrumentation Engineering.</p><p>Technical Expertise: Sound knowledge and hands-on experience with RTUs, PLCs and SCADA.</p><p>Protocols: Proficient in Industrial Communication Protocols such as Modbus &amp; TCP/IP, DNP3 etc.</p><p>E xperience: Minimum 7 - 8 years of experience in industrial automation, oil &amp; gas automation, or field service.</p><p>Compensation Gross Salary OMR 1,100/-</p><p>Work Schedule 3 Months Work at Site / 1 Month Leave</p><p>Air Ticket Every 3 Months (provided by company)</p><p>Food, Transport &amp; Accommodation at Site covered by Company</p><p>Location : Oman</p><p>Age : 30-35 Years</p><p><strong>2) JOB DESCRIPTION SITE SUPERVISOR (INSTRUMENT TECHNICIAN)</strong></p><p>Key Responsibilities</p><p>Supervision: Manage on-site instrumentation technicians, and daily installation &amp; maintenance activities.</p><p>Installation &amp; Calibration: Oversee setup and testing of flow meters, pressure transmitters, control valves, and safety systems.</p><p>Safety Compliance: Enforce Health, Safety, and Environment (HSE) rules, work permits, and Lockout/Tagout (LOTO) procedures.</p><p>Requirements and Qualifications</p><p>Education: Diploma in Instrumentation, Electrical Engineering, or a related field.</p><p>Experience: 5 to 6 years of industrial site experience, with supervisory roles in oil, gas, petrochemical, or energy sectors.</p><p>Technical Skills: Knowledge of process control loops, field instrumentation, and safety shutdown systems (ESD)</p><p>Driving: Oman Driving License is a must.</p><p>Compensation: Gross Salary OMR 425/-</p><p>Work Schedule 3 Months Work at Site / 1 Month Leave</p><p>Air Ticket Every 3 Months (provided by company)</p><p>Food, Transport &amp; Accommodation at Site covered by Company</p><p>Location : Oman</p><p>Age : 30-35 Years</p><p>Note : Service Charges are applicable.</p><p><strong>Desired Candidate Profile</strong></p><ul><li><strong>SITE MANAGER (SCADA ENGINEER)</strong></li><li>Education: Bachelors degree in Electrical, Electronics, or Instrumentation Engineering.</li><li>Technical Expertise: Sound knowledge and hands-on experience with RTUs, PLCs and SCADA.</li><li>Protocols: Proficient in Industrial Communication Protocols such as Modbus &amp; TCP/IP, DNP3 etc.</li><li>Experience: Minimum 7 - 8 years of experience in industrial automation, oil &amp; gas automation, or field service.</li><li>Age : 30-35 Years</li><li><strong>SITE SUPERVISOR (INSTRUMENT TECHNICIAN)</strong></li><li>Education: Diploma in Instrumentation, Electrical Engineering, or a related field.</li><li>Experience: 5 to 6 years of industrial site experience, with supervisory roles in oil, gas, petrochemical, or energy sectors.</li><li>Technical Skills: Knowledge of process control loops, field instrumentation, and safety shutdown systems (ESD)</li><li>Driving: Oman Driving License is a must.</li><li>Age : 30-35 Years</li></ul>

<p>Technical Coordinator – Vendor Inspection | CSWIP 3.1 <strong>Job Title:</strong> Technical Coordinator – Vendor Inspection <strong>Location:</strong> Gulf Region <strong>Industry:</strong> Oil & Gas / Engineering / Inspection <strong>Employment </strong>Type: Full-Time <strong>Experience:</strong> 5+ Years Qualification: Engineering Diploma / Bachelor’s Degree Certification: CSWIP 3.1 – Welding Inspector <strong><u>Job Description</u></strong> We are looking for an experienced Technical Coordinator – Vendor Inspection to coordinate vendor inspection activities, inspection schedules, documentation, and technical requirements for Oil & Gas / Engineering projects. The ideal candidate should have strong experience in vendor inspection coordination, quality control, welding inspection, inspection documentation, and coordination with clients, vendors, inspectors, and project teams.</p><p><strong>Desired Candidate Profile</strong></p><p>Job Description</p><p>We are looking for an experienced <strong>Technical Coordinator – Vendor Inspection</strong> to coordinate vendor inspection activities, inspection schedules, documentation, and technical requirements for Oil & Gas / Engineering projects.</p><p>The ideal candidate should have strong experience in <strong>vendor inspection coordination, quality control, welding inspection, inspection documentation, and coordination with clients, vendors, inspectors, and project teams</strong>.</p><p>Key Responsibilities</p><ul><li><p>Coordinate and monitor <strong>vendor inspection activities</strong> as per approved Inspection & Test Plans (ITPs), specifications, and project requirements.</p></li><li><p>Coordinate with vendors, third-party inspectors, clients, and project teams for inspection schedules and requirements.</p></li><li><p>Review inspection notifications, inspection requests, reports, and supporting technical documentation.</p></li><li><p>Monitor inspection progress and ensure inspections are completed within project schedules.</p></li><li><p>Coordinate <strong>welding, fabrication, material, dimensional, NDT, and testing inspections</strong>.</p></li><li><p>Review inspection reports, certificates, test reports, and quality documentation for completeness and compliance.</p></li><li><p>Track inspection status, pending actions, NCRs, and corrective actions.</p></li><li><p>Ensure compliance with applicable <strong>codes, standards, client specifications, and project quality requirements</strong>.</p></li><li><p>Coordinate with inspectors holding relevant certifications, including <strong>CSWIP 3.1</strong>.</p></li><li><p>Prepare and maintain inspection trackers, vendor inspection records, and quality documentation.</p></li><li><p>Liaise with procurement, engineering, QA/QC, vendors, and clients to resolve inspection-related issues.</p></li><li><p>Support project teams in ensuring timely completion of vendor documentation and inspection activities.</p></li></ul><p>Required Skills & Qualifications</p><ul><li><p>Diploma / Bachelor’s Degree in Mechanical Engineering or related discipline.</p></li><li><p><strong>CSWIP 3.1 Welding Inspector certification is mandatory/preferred.</strong></p></li><li><p>Minimum <strong>5 years of relevant experience</strong> in vendor inspection / QA-QC / Oil & Gas projects.</p></li><li><p>Strong knowledge of welding inspection, fabrication, NDT, material inspection, and quality documentation.</p></li><li><p>Experience working with <strong>ITPs, inspection procedures, MDRs, NCRs, and vendor quality documentation</strong>.</p></li><li><p>Good understanding of international codes and standards such as <strong>ASME, AWS, API, and relevant ISO standards</strong>.</p></li><li><p>Strong coordination, communication, documentation, and follow-up skills.</p></li><li><p>Gulf / Middle East project experience will be an advantage.</p></li><li><p>Candidates available for immediate deployment will be preferred.</p></li></ul>

<p>This role involves ensuring adherence to health, safety, and environmental regulations within the Oil &amp; Gas sector. Responsibilities include implementing safety protocols, conducting risk assessments, and promoting a safe working environment.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree or 3 years Diploma + NEBOSH IGC</li><li>Minimum 4 years of experience in Oil &amp; Gas.</li><li>Gulf Experience is Mandatory.</li><li>Good English communication is essential.</li></ul>