Software Tester Jobs in Oman

<p><h4>Position summary</h4> <p>Run daily reports (number of arrivals, departures), identify any special requests, and check reports for accuracy. Document all trips prior to the start of and at the conclusion of each trip. Transport guests to/from assigned destinations using property vehicle. Park vehicle in designated location when not in use. Inspect property vehicles for damage and cleanliness. Check tire pressure and fluid levels for property vehicle and refuel as necessary. Document all vehicle incidents (i.e., damages, accidents) and provide reports of incidents to manager/supervisor.</p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; serve as a role model and first point of contact of the Guarantee of Fair Treatment/Open Door Policy process. Report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications.</p> <p>Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests’ service needs. Speak with others using clear and professional language; prepare and review written documents accurately and completely; answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others.</p> <p>Ensure adherence to quality expectations and standards; identify, recommend, and implement new ways to increase organizational quality. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Move at a speed required to respond to work situations (e.g., run, walk, jog). Stand, sit, or walk for an extended period of time or for an entire work shift.</p> <p>Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Continual use of manual dexterity and gross motor skills with frequent use of bi-manual dexterity and fine motor skills. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualification</h4> <p><strong>Education:</strong> High school diploma or G.E.D. equivalent.</p> <p><strong>Related work experience:</strong> Less than 1-year related work experience.</p> <p><strong>Supervisory experience:</strong> No supervisory experience.</p> <h4>Required qualification</h4> <p><strong>License or certification:</strong> Commercial Driver's License (CDL).</p> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Aloft, we aren’t your typical hotel—but we aren’t too cool for school either. We’re here to be our guests’ launching and landing pad. Whether they are taking their dog for a walk and coming back for a drink, wrapping up a day of meetings with coworkers, or they’re in town to see family, friends, or their favorite band, we offer a hub for connection to others and the area around them, with modern design and personality to boot.</p> <p>We’re looking for confident self-expressers who aren’t afraid to draw outside the lines. If you are someone who gets excited about the possibilities to connect with others, then Aloft Hotels is the place for you. In joining Aloft Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">The Electrician Helper is responsible for the inspection, maintenance and field repair of all electrical equipment on the rig, logistics equipment and camp in accordance with Nabors Rig Management System (RMS). <br> Nabors is a leading provider of advanced technology for the energy industry. With operations in about 20 countries, Nabors has established a global network of people, technology and equipment to deploy solutions that deliver safe, efficient and responsible hydrocarbon production. By leveraging its core competencies, particularly in drilling, engineering, automation, data science and manufacturing, Nabors aims to innovate the future of energy and enable the transition to a lower carbon world. 0-2 years of experience with equipment similar to that used on the rig being assigned to, with a minimum of 12 months experience with drive systems, if the rig is so equipped, is preferred. Experience with USCG regulations on the electrical systems and wiring requirements if the assigned rig is a MODU classed unit. Ability to wear respiratory protective devices. <br> To ensure that all operation of electrical equipment is carried out in a safe manner and in accordance with the manufacturers specifications To maintain all electrical equipment on the rig and camp in accordance with Nabors planned maintenance system and to manufacturers specifications To carry out unscheduled repairs to electrical equipment at the rig site and on the camp To liaise with the Rig Manager, Driller and Rig Mechanic to schedule major overhauls of rig equipment To ensure the availability of adequate spare parts for electrical equipment through the inventory system, both for routine maintenance and to cover unscheduled maintenance or replacements Personally responsible for own safety and conducting one s self to the standards of Nabors Policies and Procedures Carry out all duties in the safest possible manner and ensure that personal protective equipment (PPE) is used correctly Take personal responsibility for, and demonstrate leadership in HSE. Play a leading role in safety meetings and the safety program Supervise the activities of the Rig Welder and Motorman Enact the planned maintenance program for rig and camp electrical equipment and instrumentation Work with the Driller and other crew members to ensure that the rig is operated in accordance within the design parameters and in conformance with all aspects of Nabors RMS Conduct visual, and where possible functional, inspections of equipment both prior to use and at periodic intervals and in particular after rig moves and rig-up Take responsibility for planned maintenance, certification, record-keeping and reporting Maintain all required records, documentation and certification of electrical equipment on the rig and camp and produce accurate and timely reports on usage of such equipment Maintain and update all electrical drawings and wiring diagrams Ensure that lock-out and tag-out procedures are fully complied with at rig site and campsite Supervise the dismantling, packaging and preparation of electrical equipment for rig moves, including re-assembly at new locations Establish a culture of continuous improvement in operations and demonstrate results in this regard. Work with the other members of the rig crew to develop improved practices which will positively impact on rig performance Maintain, jointly with the Rig Mechanic, all rig instrumentation Manage, in conjunction with the Warehouseman, the inventory of spares and replacement parts for Electrical Equipment and initiate material requests and material transfers as required Maintain the cleanliness of the SCR house and integrity of the electrical control equipment therein Make recommendations for improved practices Prepare the rig and camp equipment for stacking out, when required, in accordance with the provisions of the RMS and contribute to preparation of the stack out report Make provisions for electrical supplies and instrumentation to meet third party service companies requirements at rig site and provide emergency repairs to their equipment where possible Provide on-the-job training for Electrical Helpers Maintain the validity of personal certification and training<br></div></section>

<p><h4>Principal accountabilities</h4> <p>The power gen mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with maintenance action sheets, technical orders, manuals, checklists, regulations, maintenance action sheets and unit type code (UTC) configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with maintenance action sheets, Air Force technical orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of bare base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including work orders, USAF supply and Amentum forms and updates Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs temporary duty (TDY) in the area of operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense agencies contingency systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense agencies contingency systems preferred but not required.</li> </ul></p><p></p>

<p>Measure, mark, cut, and shape wood, plywood, MDF, laminates, and other construction materials. Construct, assemble, and install doors, windows, partitions, cabinets, wardrobes, furniture, and wooden frameworks. Install ceiling systems, flooring, wall paneling, and decorative woodwork. Perform shuttering/formwork carpentry for concrete structures where required. Repair, replace, and maintain damaged wooden structures and fixtures. Operate and maintain hand tools and power tools such as saws, drills, planers, routers, sanders, and nail guns. Ensure all work meets project specifications, quality standards, and safety regulations. Check dimensions and ensure proper alignment and finishing of all carpentry work. Install hardware such as hinges, locks, handles, door closers, and drawer runners. Apply finishing work including sanding, polishing, varnishing, staining, and laminating. Coordinate with supervisors, engineers, and other trades to complete work efficiently. Maintain a clean and organized work area. Identify material requirements and minimize wastage.</p><p><strong>Desired Candidate Profile</strong></p><p>Male candidates Gulf experience</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The core responsibilities include the meticulous evaluation, selection, retrieval, and arrangement of documents. This involves proficient copying, scanning, and secure storage of all essential paperwork. A key duty is the creation and maintenance of accessible, retrievable computer archives and databases. The role requires organizing archival records and developing effective classification systems to ensure easy access to archival materials. Preparation of archival records, such as document descriptions, is crucial for facilitating information access. Accuracy checks and editing of files, including contracts, are a daily task. Reviewing and updating technical documents, like manuals and workflows, ensures organizational efficiency. Creating templates for future use streamlines processes. Maintaining confidentiality around sensitive information and terms of agreement is paramount. Managing the flow of documentation across various departments, including human resources, marketing, and construction, is essential. Finally, supervising the direct viewing of documents and retrieving copies of materials is part of the supervisory aspect of this role.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The core responsibilities include the meticulous evaluation, selection, retrieval, and arrangement of documents. This involves proficient copying, scanning, and secure storage of all essential paperwork. A key duty is the creation and maintenance of accessible, retrievable computer archives and databases. The role requires organizing archival records and developing effective classification systems to ensure easy access to archival materials. Preparation of archival records, such as document descriptions, is crucial for facilitating information access. Accuracy checks and editing of files, including contracts, are a daily task. Reviewing and updating technical documents, like manuals and workflows, ensures organizational efficiency. Creating templates for future use streamlines processes. Maintaining confidentiality around sensitive information and terms of agreement is paramount. Managing the flow of documentation across various departments, including human resources, marketing, and construction, is essential. Finally, supervising the direct viewing of documents and retrieving copies of materials is part of the supervisory aspect of this role.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Available specialties 9 openings</p> <div> Internal MedicineOncologyCardiologyPediatric SurgeryNephrologyUrologyGeneral PractitionerEmergencyOBG &amp; Gynaecology<br> </div> <div> <p>Entry requirements</p> <div> <div>1MBBS or equivalent + <strong>5 years' total experience</strong> </div> <div>2The last <strong>3 years of practice</strong> must be full-time in the specialty</div> <div>3Practice in a privately owned <strong>unregistered clinic is not acceptable</strong> </div> <div>4Age must be less than <strong>45 years</strong> </div> </div> </div> <div> <p>Benefits</p> <div> AccommodationLiving allowanceMedical coverTransport allowanceReturn air ticketPer Oman Labor Law<br> </div> </div> <div> <p>About this opportunity</p> <p>Medical Officer positions are available with leading healthcare institutions in the Sultanate of Oman. Ilahi Healthcare manages the full recruitment cycle from eligibility screening and OMSB credentialing guidance to scheduling online interviews in India and visa support. Experience must include at least 3 consecutive years full-time in the specialty. Age limit is under 45 years.</p> </div></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION DESCRIPTION: Position Title: Mechanical Technician Reports to: Mechanical Supervisor Department: Maintenance and Operations Department Location: Duqm/ Ras Markaz</p><p>JOB PURPOSE: Carry out preventive, corrective, and predictive maintenance of all mechanical systems and equipment across OTTCO s terminals, including pumps, compressors, valves, tanks, piping systems, HVAC units, and other static and rotating machinery, to ensure continuous and reliable operation of all facilities.</p><p>The position ensures that all maintenance and repair activities are performed in compliance with OTTCO s maintenance procedures, HSE policies, OEM recommendations, and international standards, supporting operational reliability and mechanical integrity of terminal assets.</p><p>REPORTING STRUCTURE: Number of Staff Supervised Direct Reports: 0 Total: 0</p><p>KEY RESPONSIBILITIES:</p><p>Operations &amp; Maintenance</p><p>Perform preventive and corrective maintenance on mechanical systems including pumps, compressors, gearboxes, valves, piping networks, and pressure vessels.</p><p>Dismantle, inspect, and assemble rotating equipment during scheduled and unscheduled maintenance.</p><p>Conduct alignment, balancing, lubrication, and vibration monitoring as per preventive maintenance plans.</p><p>Assist in troubleshooting equipment failures and identify root causes in coordination with the Mechanical Supervisor.</p><p>Carry out routine inspections to detect leaks, abnormal noise, vibration, or wear in mechanical components.</p><p>Support maintenance and inspection of static equipment such as tanks, exchangers, and pipelines.</p><p>Perform mechanical isolations, tagging, and reinstallation in accordance with PTW and safety procedures.</p><p>Update maintenance job cards, inspection findings, and work completion details in the CMMS (SAP/Maximo) system.</p><p>Participate in start-up, shutdown, and major overhaul activities as per approved maintenance plans.</p><p>Project &amp; Technical Support</p><p>Assist in installation, commissioning, and modification of mechanical equipment for ongoing projects or upgrades.</p><p>Participate in inspection and quality verification of mechanical works carried out by contractors.</p><p>Ensure installations comply with design drawings, mechanical standards, and project specifications (API, ASME, ASTM, ISO).</p><p>Provide site feedback on equipment condition and improvement opportunities to enhance reliability and maintainability.</p><p>Safety &amp; Compliance</p><p>Follow OTTCO s HSE, Permit-to-Work (PTW), and mechanical isolation procedures at all times.</p><p>Conduct toolbox talks and ensure proper use of PPE, tools, and lifting equipment.</p><p>Identify and report unsafe acts, conditions, or potential hazards promptly.</p><p>Maintain mechanical workshops, pump stations, and maintenance areas in a clean and safe condition.</p><p>Ensure safe execution of lifting, rigging, and confined space activities as per approved procedures.</p><p>Participate in emergency drills and support plant safety initiatives.</p><p>Teamwork &amp; Coordination</p><p>Coordinate with Electrical, Instrument, and Operations teams to perform multidisciplinary maintenance activities.</p><p>Support supervisors during shutdowns, major overhauls, and turnaround campaigns.</p><p>Assist in mentoring and training junior technicians and contractors to maintain work quality and efficiency.</p><p>Participate in team meetings, planning sessions, and maintenance improvement workshops.</p><p>Documentation &amp; Reporting</p><p>Record daily work activities, inspection data, and equipment readings in job sheets or CMMS.</p><p>Maintain equipment history cards, lubrication charts, and spares consumption logs.</p><p>Report defects, performance issues, and material shortages to supervisors for timely action.</p><p>Support preparation of maintenance reports, failure analysis records, and spare parts lists.</p><p>Continuous Improvement</p><p>Recommend improvements to maintenance practices, procedures, and job plans.</p><p>Participate in root cause analysis (RCA) for repeated mechanical failures.</p><p>Support reliability and efficiency enhancement programs under the ETIZAAN initiative.</p><p>Identify cost-saving opportunities related to spare parts, lubrication, or resource utilization.</p><p>Perform any other duties or special assignments as directed by line management.</p><p>Familiarization with QHSE Policies, Objectives, procedures and its record maintenance</p><p>Awareness on Significant environmental aspects, Health and safety hazards, related actual and potential aspects and risks associated with their risk.</p><p>Awareness on Emergency preparedness and response measures.</p><p>Awareness on implications of not conforming to the integrated managements system requirements, including not fulfilling the organization s compliance obligations</p><p>Key interactions</p><p>Internal: Department Managers, Operations Shift Staff, SCM, TSD, Maintenance, HSE, Fire</p><p>External: OQ, SIPC, Surveying Companies, ROP and Civil Defence, gas companies, other contractors and suppliers as required. Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or National Vocational Qualification (NVQ) in Mechanical Engineering / Industrial Maintenance.</p><p>Professional Certifications</p><p>Authorized certification in Mechanical Maintenance / Rotating Equipment Maintenance.</p><p>HSE and PTW system certifications such as NEBOSH/IOSH preferred.</p><p>Training in Vibration Analysis, Alignment, and Rigging/Lifting Safety is advantageous.</p><p>CMMS (SAP) training and basic computer literacy preferred.</p><p>Experience</p><p>+5 years of hands-on experience in mechanical maintenance within oil &amp; gas terminals, refineries, or heavy industrial facilities.</p><p>Experience in servicing and maintaining centrifugal and positive displacement pumps, compressors, valves, and gearboxes.</p><p>Familiar with mechanical sealing systems, gaskets, and bolting procedures.</p><p>Experience in piping maintenance, leak repair, and hydrotesting.</p><p>Working knowledge of tanks, pressure vessels, exchangers, and HVAC systems.</p><p>Familiar with international standards such as API 610, 650, 682, ASME, and ASTM.</p><p>Technical Competencies</p><p>Skilled in dismantling, assembling, and aligning rotating machinery.</p><p>Proficiency in using precision tools (dial gauges, micrometers, torque wrenches, etc.).</p><p>Ability to interpret mechanical drawings, P&amp;IDs, and maintenance manuals.</p><p>Knowledge of lubrication practices, material compatibility, and corrosion prevention.</p><p>Capable of performing mechanical troubleshooting and identifying failure modes.</p><p>Familiar with safe rigging, lifting, and confined space work practices.</p><p>Behavioral Competencies</p><p>Safety-oriented with strong discipline and attention to detail.</p><p>Good communication and teamwork abilities across multi-discipline teams.</p><p>Capable of working under supervision and delivering high-quality workmanship.</p><p>Proactive, reliable, and committed to continuous improvement.</p><p>Upholds OTTCO s values of Safety, Integrity, Reliability, and Operational Excellence.</p><p></p></section>

<p>Consultant Strategic Partnerships &amp; M&amp;A leads the origination, evaluation and execution of ecosystem partnerships (hyperscalers, OEMs, telcos, ISVs) and inorganic growth opportunities (investments, JVs, acquisitions, carve-outs) that accelerate Onetech s strategy across data centre, cloud, cybersecurity and system integration services. The role owns the end-to-end deal cycle market scanning, business case and valuation, due diligence orchestration, negotiation and closing and sets up post-deal integration and partnership governance to realise synergies, protect value and ensure regulatory compliance in Oman.</p><p>RESPONSIBILITIES</p><ul><li>Strategy &amp; Deal Origination Translate corporate strategy into a pipeline of partnership/M&amp;A theses and target lists; maintain market maps for priority domains (cloud, managed services, cybersecurity, platforms, niche SIs).</li><li>Conduct opportunity analysis and screening of acquisition or investment targets aligned with OneTech s strategic priorities.</li><li>Build investment cases: problem statement, strategic fit, synergy logic, options analysis (build/partner/buy), risks and mitigations.</li><li>Run initial outreach, screening and NDAs; manage confidentiality and information flows.</li><li>Partnerships (Alliances, JVs) Identify, evaluate, and develop partnerships with technology vendors, hyperscalers, service providers, and ecosystem enablers.</li><li>Structure and negotiate partnership models (resell/CSP, MSP, OEM, co-sell, white-label, JV, distribution, BOT/revenue-share) with clear roles, quotas and support obligations.</li><li>Define partner tiering, enablement and joint GTM plans with Sales/Marketing; establish QBRs, scorecards and escalation paths.</li><li>Ensure compliance with data-protection, security, sanctions and competition requirements in partner agreements.</li><li>Monitor strategic partner performance and alignment with business goals.</li><li>Commercial Finance &amp; Deal Modelling Build financial models for partnerships and M&amp;A (P&amp;L, CF, BS impact; NPV/IRR; scenario/sensitivity; synergy and integration costs).</li><li>Set pricing/discount corridors and approval matrices for partnership constructs in coordination with Finance.</li><li>M&amp;A Execution Lead end-to-end M&amp;A processes: teasers/IM review, valuations, indicative offers (EOI/NBO), data-room Q&amp;A, management meetings.</li><li>Coordinate due diligence (commercial, financial, tax, legal, HR, tech/cyber, operations); consolidate findings and value-bridge, and define SPA/business-warranty protections.</li><li>Support the development of deal structures, term sheets, and definitive agreements in coordination with legal and financial advisors.</li><li>Drive negotiations (SPA, SHA/JVAs, TSAs), board/IC materials, and closing deliverables.</li><li>Post-Deal Integration &amp; Value Realisation Develop Day-0/Day-1 and 100-day plans, integration workstreams, TSA governance and synergy tracking (revenue, cost, capex/working capital).</li><li>Establish post-deal KPIs and risk logs; run integration reviews and corrective actions.</li><li>Governance, Risk &amp; Compliance Maintain stage-gate governance, IC memos and deal documentation; ensure Delegations of Authority (DOA) compliance.</li><li>Manage regulatory touchpoints (competition/anti-trust; PDPL data obligations in transactions; tax/VAT structuring with Finance; sector approvals as applicable).</li><li>Stakeholder Management &amp; Communications Align internal stakeholders (Finance, Legal, Technology, Operations, Sales) and external advisors; manage board/EXCO expectations with clear narratives.</li><li>Prepare board-level presentations, strategic recommendations, and investment memos.</li><li>Market Intelligence &amp; Insights Track competitor moves, funding rounds, M&amp;A activity, and partnership models, technology trends and valuation benchmarks in the GCC; maintain a knowledge base of precedent deals and partnership structures.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><strong>Qualification</strong> Bachelor's degree in Business, Finance, Economics, or Engineering. Postgraduate degree (e.g., MBA or equivalent) is strongly preferred. Certification CFA / ACA / ACCA (preferred). Relevant certifications in corporate finance, valuation, or M&amp;A (e.g., FMVA, CIMA) are a plus.</li><li><strong>Experience</strong> Minimum 7 10 years of experience in M&amp;A, strategic partnerships, corporate development, or investment advisory ideally within ICT, technology, or telecom sectors.</li><li><strong>Skills</strong> Strategic and financial analysis. Business case development &amp; valuation modelling. M&amp;A due diligence and integration. Contract review and deal structuring. Market intelligence and partner management. Strong Excel, PowerPoint, and data visualization tools.</li></ul>

<p><h4>Principal Accountabilities<\/h4>\n<p>The chief age mechanic supervises, trains age technicians and performs inspections, maintenance and servicing and storage of assigned age. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven age. Responsible for the day-to-day age shop operations and communicates with the age superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n<ul>\n<li>Primary supervisor to train age mechanics and perform periodic inspection, maintenance and repair actions on assigned age assets.<\/li>\n<li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n<li>Prepares age\/FLSE and other equipment for exercises or actual deployments.<\/li>\n<li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n<li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n<li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n<li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n<li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n<li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n<li>Conducts on-the-job training for age mechanics on assigned age\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n<li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n<li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n<li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n<li>Operates material handling equipment as required.<\/li>\n<li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of hazmat when required.<\/li>\n<li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n<li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n<li>Attends age staff meetings as required.<\/li>\n<li>Prepares personnel performance reports as assigned.<\/li>\n<li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n<li>Performs other duties as assigned.<\/li>\n<li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n<h4>Minimum Requirements<\/h4>\n<ul>\n<li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n<li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n<li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n<li>Will be required to operate material handling equipment.<\/li>\n<li>High school diploma or equivalent required.<\/li>\n<li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n<li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n<li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n<li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n<li>Will be exposed to extreme noise from operating equipment.<\/li>\n<li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n<li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n<li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n<h4>Preferred Qualifications<\/h4>\n<ul>\n<li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n<li>Ideal candidate will have training as a USAF age, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Job Description<\/h4>\n<p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n\n<h4>Principal Accountabilities<\/h4>\n<ul>\n <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.<\/li>\n <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n <li>Prepares AGE\/FLSE and other equipment for exercises or actual deployments.<\/li>\n <li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n <li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n <li>Conducts on-the-job training for AGE mechanics on assigned AGE\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n <li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n <li>Operates material handling equipment as required.<\/li>\n <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.<\/li>\n <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n <li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n <li>Attends AGE staff meetings as required.<\/li>\n <li>Prepares personnel performance reports as assigned.<\/li>\n <li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n <li>Performs other duties as assigned.<\/li>\n <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n\n<h4>Minimum Requirements<\/h4>\n<ul>\n <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n <li>Will be required to operate material handling equipment.<\/li>\n <li>High school diploma or equivalent required.<\/li>\n <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n <li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n <li>Will be exposed to extreme noise from operating equipment.<\/li>\n <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n <li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n <li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n\n<h4>Preferred Qualifications<\/h4>\n<ul>\n <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n <li>Ideal candidate will have training as a USAF AGE, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job F-4359-O - Construction Lead (Mech /HVAC CP4N) <p>Qualifications*</p><br><p>Bachelors Degree in Sciences or Engineering</p><br><p><strong>Knowledge and/or Experience:-</strong></p><br><p> 8 years specific involvement in project execution with previous leading roles in mechanical/HVAC scope within an EPC contract<br>execution environment in the Oil &amp; Gas Industry, including 1 year of experience in a supervisory role, including acting roles, or oversight of service/vendor personnel. Additional relevant work experience may be substituted for technical education.<br> Good knowledge of Project Execution procedures and field management and techniques including fabrication, welding, lifting,<br>mechanical testing and completions.<br> Experience with Oil and Gas companies, contractors, service companies, or heavy construction companies.<br> Experience working in large scale operating organisations in Operations, Projects, Subsurface etc.</p><br><p><strong>Technical and Business Skills:-</strong></p><br><p> Knowledge of design standards, specifications, codes, and appropriate safety criteria related to major fabrication, transport, installation,brownfield execution, and hook-up, as applicable to the project scope.<br> Knowledge of offshore facilities and structures, onshore facilities, or yard operations as applicable to a project scope.<br> Knowledge of execution methods and risks associated with sour gas<br>and LNG production facilities.</p><br> <br> <br> </div>

<p><h4>Qualifications & Experience</h4> <p><strong>Qualification:</strong> Engineering degree in Mechanical Engineering.</p> <p><strong>Experience:</strong> Minimum 12 years' experience as Rotating Engineer in the oil and gas industry.</p> <p>Experience as Rotating Engineer in projects involving gas turbines and compressors.</p> <p>Strong leadership skills and good communication skills.</p> <p>Good analytical skills.</p> <p>Familiarity with Total general specifications is a plus, along with relevant codes and standards.</p> <p><strong>Language:</strong> Fluent English.</p> <p>Ability to work on projects in a complex and multicultural environment.</p> <h4>Activities</h4> <ul> <li>Identify Rotating Engineering technical decisions to be made. Define and manage a clear way forward for these decisions and report to the Package Manager.</li> <li>Work with the weight control engineer and engineering team to ensure close weight monitoring and control.</li> <li>Ensure close coordination with other disciplines on all engineering, constructability, and operational matters.</li> <li>Ensure that relevant feedback and lessons learned from previous similar projects are considered.</li> <li>Support fabrication and construction engineering by reviewing engineering documents, approving modifications, reviewing non-conformities, and assisting in closure of punch lists.</li> <li>Support the construction group by ensuring all mechanical rotating equipment and its auxiliaries are installed correctly as per standards, properly supported, aligned, and leveled according to design requirements.</li> <li>Support expediting closure of punch lists by following up with relevant parties from the contractor and/or vendor.</li> <li>Support the project during installation and hookup stages by reviewing and approving work packs and reviewing red marks.</li> <li>Ensure closure of mechanical rotating engineering dossiers consisting of contractor and vendor deliverables in a timely manner as per project requirements.</li> <li>Ensure project documents related to the Mechanical Rotating Engineering discipline are reviewed and commented on in a timely manner and in accordance with company standards, project specifications, and contractual requirements.</li> <li>Coordinate and issue project responses to contractors' and vendors' requests on engineering design clarifications and technical query reports (TQR).</li> <li>Identify potential deviations and derogations to the company and assist in preparation of deviation packages.</li> <li>Review and approve deviation and concession requests from contractors and/or vendors, aligned with the company Technical Referential Person (TRP).</li> <li>Consult the Engineering & Construction department to process derogation requests and interface with relevant TRPs to secure needed approvals.</li> <li>Review and expedite final project documentation including final dossiers and as-built drawings.</li> <li>Support the commissioning execution phase related to the rotating equipment and package.</li> <li>Follow the execution of mechanical commissioning activities to achieve commissioning schedule completion targets.</li> <li>Supervise commissioning execution to ensure all technical and contractual information is properly recorded, collected, and available for inspection and reference as required by law, regulations, and company policies.</li> <li>Control and follow up on vendors' commissioning scope of work activities such as site acceptance tests (SAT), operational test procedures (OTP), document updates, closing of punch lists, and reporting.</li> </ul></p><p></p>

<p><br></p><p>A) Senior Estimation &amp; Proposal Engineer</p><p>1) Degree in Mechanical Engineering.</p><p>2) 8+ years of experience in Estimation &amp; Proposal writing</p><p>3) Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</p><p>4) Strong knowledge of international codes and standards</p><p>5) Strong knowledge of international codes and standards</p><p>6) Experience in bidding for long-term contracts is an added advantage.</p><p>7) Familiarity with local construction codes and regulations.</p><p>8) Working knowledge of PDO, OQ, and Oxy specifications.</p><p>9) Experience in contract processing and contract management.</p><p>10) GCC / Oman experience is a must</p><p>B) Sales Engineer (Rotating &amp; Static)</p><p>5 Years of experience require</p><p>1) Degree in Mechanical / Chemical Engineering.</p><p>2) Identify, target and create prospects for business development.</p><p>3) Sales and marketing activities for the Principal / representing companies and their products.</p><p>4) Manage various aspects of project information in to competitive intelligence system</p><p>5) Networking with key personnel of both clients and Principals</p><p>6) To meet or exceed sales targets consistently</p><p>7) Responsible for sending product information, proposals and quotes, correspondence to follow up and to generate new sales, and maintaining accurate database of all contact interactions</p><p>8) To prepare tenders for various projects involving equipment</p><p>9) Reporting to the Sales Manager</p><p>10) GCC / Oman experience is a must</p><p>C) Painting &amp; Coating Inspector</p><p>1) Diploma / Degree in Mechanical, Chemical, or related engineering discipline.</p><p>2) Minimum 5 years of experience in painting/coating inspection for oil &amp; gas, industrial, or EPCC projects in Oman or the GCC, including workshop / manufacturing environments.</p><p>3) Valid BGAS or NACE Level II Coating Inspector certificate (mandatory).</p><p>4) Hands-on expertise in inspection of piping external, vessel internal/external, and storage tank internal/external painting/coating applications.</p><p>5) Solid knowledge of applicable international codes and standards.</p><p>D) QCI Painting Inspector</p><p>1) Diploma / Degree.</p><p>2) Minimum 5 years in these Minimum 3 years overseas experience in QA / QC Painting Inspector works, for Refinery / Petrochemical / Oil &amp; Gas Projects (Storage Tanks, Pressure Vessel, Piping &amp; Structure).</p><p>3) Well experienced in Tank internal / external painting system including GRE coating.</p><p>4) Knowledge in ASTM, ISO, SSPC and NACE</p><p>E) HSE Officer</p><p>1) Bachelor s degree in Occupational Health &amp; Safety, Environmental Science, Engineering, or related field.</p><p>2) HSE certification (NEBOSH, IOSH, OSHA, etc.) is highly desirable</p><p>3) 3-5 years of experience in a safety role, preferably in the oil and gas / Petrochemical / Refinery industry.</p><p>F) Senior Planning &amp; Project Control Engineer</p><p>1) Diploma / B. Tech / BE, Mechanical Engineering. PMP Certification.</p><p>2) 15+ years related experience and minimum 8+ years experience in the Planning engineer position with independently preparing project construction plans and schedules with resources schedules (Manpower/Materials/Equipment), control of major EPC Projects in Oil &amp; Gas industry and Fabrication Shop</p><p>3) Capable of preparing Project planning deliverables, Master schedules and Issuance of company procured and Client supply materials.</p><p>4) Progress reporting (External to Clients &amp; Internally to Management) including updating, monitoring and project controls. Responsible for development of Work breakdown Structure, Earned value and performance measurement for each project.</p><p>5) Coordinate between Engineering, Procurement, Suppliers and Construction teams during design and construction phases.</p><p>6) Experience in managing multiple subcontractors with high value subcontracts.</p><p>7) Independently manage planning and project control functions for EPC projects.</p><p>8) Prepare and update baseline schedules using Primavera (P6) or equivalent tools.</p><p>9) Track progress and prepare daily, weekly, and monthly reports.</p><p>10) Conduct delay analysis and propose mitigation plans. Issue cost reports and VOWD reports.</p><p>G) Permit Holder (Mechanical)</p><p>1) Diploma / Degree in Mechanical Engineering.</p><p>2) (PDO/ OQ valid permit cards preferred)</p><p>H) Senior HR Executive (Chennai Location)</p><p>1) MBA in Human Resource.</p><p>2) Must be having 2-5 years experience in recruitment for workmen and staff category.</p><p>3) Lead end-to-end recruitment process, attracting the most suitable candidate to support business objectives. (Blue &amp; White Collar)</p><p>4) Collaborate with line managers and division head, to understand manpower needs and ensure a streamlined recruitment experience.</p><p>5) Domestic Travelling required, as per work scope.</p><p>6) Foster positive employee relations by addressing concerns, resolving conflicts, and promoting collaborative work environment.</p><p>7) Coordinate with team to understand the training requirement.</p><p>8) Oversee the performance management process, ensure fair and transparent evaluation.</p><p>9) Work closely with division to set the performance expectation and to provide feedback to the employee.</p><p>10) Manage and administer the monthly payroll and C&amp;B program.</p><p>11) Ensure compliance with relevant labour laws and industry standards.</p><p>12) Devise the compensation schemes and implement to ensure employee motivation.</p><p>13) Develop and update HR policies and procedures, ensuring alignment with legal requirements and best practices.</p><p>14) Stay informed about the changes in labor laws and update organization policies accordingly.</p><p>15) Update the ISO audit related documents.</p><p>16) Collaborate with relevant stakeholders to create a positive and supportive work environment.</p><p>17) Organize orientation for new employees and exit interview.</p><p>18) Organize the camp inspection with the support of Admin, so a better living environment.</p><p>19) Maintain records for each employee.</p><p>20) Establish and maintain medical service providers, ensuring their continuous development.</p><p>21) Evaluate and select insurance policies and vendors.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>1) Diploma / Degree in Mechanical Engineering.</p><p>2) (PDO/ OQ valid permit cards preferred)</p>

<p>Title: Class teacher Department: Academics Reports to: Academic Quality Controller / Director / RAQC Studying &amp; Preparing the curriculum to enable the teacher to prepare the lesson plans for classes &amp; deliver in class according to the set pacing charts. Checking students notebooks &amp; copybooks on regular basis to ensure that they are preparing their homework &amp; writing down the required points. Correcting &amp; grading of written parts of exams. Advice and guidance to students in the class _ the teacher will remind the students on a regular basis that she is available to see them at certain times each week to discuss problems, give advice, etc.( This should happen at least three times a week in the form Classroom at the beginning of the Lunch Recess). Follow up of letters and notices to parents to check that all letters, results, memos or any other form of written communication to parents have, in fact, been delivered. Where appropriate to check that replies have been received. Posting of Results to check that AMS results have been posted and students have had them drawn to their attention. To replace any results that go missing. To check on a daily basis that an up to date seating plan is in place and to replace it immediately if of goes missing. To monitor class prefects to have regular meetings with class prefects and to make sure that they know what are their duties. Decoration and Displays to be responsible for the pin boards and other displays in the classroom. To make sure that there is a lively and attractive display of material that is relevant to the various themes in Social Studies, Class Reader, etc. To monitor general class cleanliness and tidiness. There should be no direct communication between Class teachers and Parents. All communication is channeled through the AQC. Class teachers should report problems immediately to the AQC. A file will be provided for you to note sown issues, if the AQC is not available. All problems must be regarded as confidential. They can be discussed only with the AQC or the Director not with other teachers or supervisors. Exam invigilation duties. Class teachers of Grs 4 and 5 should check diaries on a daily basis.</p><p><strong>Desired Candidate Profile</strong></p><h2>Knowledge, skills and Abilities:</h2><ul><li>Passion for teaching</li><li>Ability to abide by the SABIS(R) System &amp; methodology</li><li>Excellent communication skills</li><li>Ability to get through to students</li><li>Strong teaching skills to include planning, delivery of instruction, classroom management, curriculum implementation and classroom assessment</li><li>Strong organizational skills</li><li>Excellent planning skills</li><li>Punctuality</li><li>Efficiency in delivery</li><li>Conscientiousness with a sense of responsibility</li><li>Maturity</li><li>Ability to spread positive spirit and maintain positive atmosphere</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> The job of <strong>Executive Chef </strong>is executed satisfactorily when:<br><ul><li>Recipes are maintained up-dated and accurate costing of all dishes prepared and sold in the Food and Beverage operation. New dishes and products are developed.</li><li>Comprehensive product knowledge is fostered in regards to ingredients, equipment, suppliers, markets and current trends and appropriate adjustments to kitchen operations are made accordingly.</li><li>Excellent culinary technical skills are displayed and maintained.</li><li>Menus offering our guests value for money in accordance with corporate guidelines are created in collaboration with the Food &amp; Beverage Director / Manager.</li><li>Effective and positive employee working relationships are established and maintained (ESS score 75% and above).</li><li>All HACCP guidelines are achieved and maintained.</li></ul>The <strong>Executive Chef</strong> fulfils their role as a Talent Development Ambassador when:<br><ul><li>They actively support and implement Talent Development initiatives as a part of their daily activities.</li><li>They identify Training talents in their department and throughout the hotels as per below definition* and actively support their career development.</li><li>They support and initiate transfer, cross exposure and task force assignments for their team.</li><li>They personally conduct prefinance evaluation with their team on a regular basis and take personal interest for their talents’ development plans.</li><li>They recruit and select potential talent according to the Company’s current and future hotel, regional and worldwide needs including conducting interviews for positions in their department and their region.</li></ul><br><ul><li>Manage all functions of the Food Production and Stewarding operations to achieve the optimum departmental profit.</li><li>Plan and organize with the Director of Food and Beverage successful Food and Beverage activities in the hotel and abroad.</li><li>Keep an up-dated hotel policies and procedures file.</li><li>Work with the People Services Manager to ensure the departmental performance of staff is productive.</li><li>Plan for future staffing needs.</li><li>Ensure training needs analysis of Kitchen staff is carried out and training programmes are designed and implemented to meet needs (in collaboration with the Training Manager where applicable).</li><li>Conduct probation and formal performance appraisal in line with company guidelines.</li><li>Maintain up to date staff records and approves leave requests.</li><li>Coach, counsel and discipline staff, providing constructive feedback to enhance performance.</li><li>Participate in the preparation of the hotel's revenue plan and marketing programmes.</li><li>Determine with the Finance Director the minimum and maximum stocks of all food, material and equipment.</li><li>Work with Finance in the preparation and management of the department’s budget.</li><li>Demonstrate awareness of OH&amp;S policies and procedures and ensure all procedures are conducted safely and within OH&amp;S guidelines and ensure all direct reports do the same.</li><li>Be aware of duty of care and adhere to occupational, health and safety legislation, policies and procedures.&nbsp;</li><li>Be familiar with property safety, first aid and fire and emergency procedures and operate equipment safely and sensibly.</li><li>Initiate action to correct a hazardous situation and notify supervisors of potential dangers.</li><li>Log security incidents and accidents in accordance with hotel requirements.</li><li>Implement and practice HACCP.</li></ul>Additional responsibilities and tasks can be added at any time according to the needs of the business and of the hotel.<br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>PipeCare Group of companies has been helping the customers ensure the integrity of their pipeline and facility assets for over 20 years. PipeCare Group is looking for an experienced Team Leader [Operations] who will lead the team of field Project workers and making sure that the Project work is executed in a safe, effective and efficient manner in line with the time, resources and financial planning.</p><p>Key Responsibilities &amp; Authorities</p><ul><li>Prepare, sign and submit pigging, daily, express and other relevant reports</li><li>Discuss equipment and tools requirements including auxiliaries, AGM's, DGPS, magnets, launching trays, spares, tool box and all other required tools for use in the field, etc.</li><li>Study and analyze project information document, operation manuals, pigging procedures and other project-related documents</li><li>Establish professional contact with client s field personnel creating friendly working relations</li><li>Manage and develop the team to execute field work in a safe, effective and efficient manner in line with time, resource and financial planning.</li><li>Is authorized to stop execution of any work at site if it is unsafe or may create unsafe work conditions.</li><li>Coordinate field activities between the team, subcontractor, client and other involved parties.</li><li>Visit client s sites (site kick-off meetings, field surveys, risk assessment review meetings, etc.).</li></ul><p>Skills/Experience:</p><ul><li>Degree in Engineering (Mechanical or relevant) plus 3 years of operation planning experience</li><li>Experience in Oil and Gas sector, preferably with ILI exposure</li><li>Computer skills in Microsoft word, excel and outlook at an intermediate level</li><li>Fluency in English, the language of the Territory is an advantage</li><li>Ability to travel extensively</li></ul><p>Physical and Mental Requirements:</p><ul><li>Lifting and Carrying: Ability to lift and carry up to 50 pounds.</li><li>Mobility: Must be able to walk and climb to perform duties, including maneuvering within a refinery or plant environment and accessing elevated platforms via ladders and stairwells.</li><li>Communication: Sufficient clarity of speech and hearing, or other communication capabilities, to communicate effectively.</li><li>Focus and Multitasking: Ability to maintain focus and multitask effectively.</li><li>Safety Equipment: Must be able to wear safety equipment as required by the safety department for personal protection, if/where needed in manufacturing environments.</li><li>Personal Mobility and Reflexes: Sufficient personal mobility and physical reflexes, with or without reasonable accommodations, to perform office duties and travel to off-site locations when necessary.</li></ul><p>What we do:</p><p>In-Line Inspection Services</p><p>PIPECARE provides In-Line Inspection Services to locate, identify, and size threats, supporting integrity management requirements.</p><p>Check out our AI Technology and other cutting-edge technologies by clicking the following YouTube Links:</p><p>PIPECARE Group - YouTube</p><p>SMART AI CALIPER - Inspection experience like never befor e</p><p>Inspection Technologies</p><ul><li>Magnetic Flux Leakage (MFL): Detects and sizes general corrosion and metal loss anomalies, especially circumferentially oriented.</li><li>Transverse Field Inspection (TFI): Detects and sizes general corrosion and metal loss anomalies, primarily axially oriented.</li><li>Ultrasound (UT): Detects and sizes general and other metal loss anomalies with high depth sizing accuracy.</li><li>Ultrasonic Crack Detection: Detects and sizes cracks and colonies of cracks.</li><li>Caliper (Geometry): Detects and sizes deviations in the ideal circular shape of a pipeline (dents, ovalities, wrinkles, etc.).</li><li>Specialized Tools and Technologies</li><li>Combo Tools: Use multiple measurement systems in various combinations.</li><li>Specialized Tubing Technologies: Designed for Furnace and Downhole Operations.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Degree in Engineering (Mechanical or relevant) plus 3 years of operation planning experience</li><li>Experience in Oil and Gas sector, preferably with ILI exposure</li><li>Computer skills in Microsoft word, excel and outlook at an intermediate level</li><li>Fluency in English, the language of the Territory is an advantage</li><li>Ability to travel extensively</li></ul><p>Physical and Mental Requirements:</p><ul><li>Lifting and Carrying: Ability to lift and carry up to 50 pounds.</li><li>Mobility: Must be able to walk and climb to perform duties, including maneuvering within a refinery or plant environment and accessing elevated platforms via ladders and stairwells.</li><li>Communication: Sufficient clarity of speech and hearing, or other communication capabilities, to communicate effectively.</li><li>Focus and Multitasking: Ability to maintain focus and multitask effectively.</li><li>Safety Equipment: Must be able to wear safety equipment as required by the safety department for personal protection, if/where needed in manufacturing environments.</li><li>Personal Mobility and Reflexes: Sufficient personal mobility and physical reflexes, with or without reasonable accommodations, to perform office duties and travel to off-site locations when necessary.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Talent Development &amp; Performance Officer is responsible for supporting the implementation of performance management, learning and development, competency development, and employee capability enhancement initiatives. The role ensures that performance appraisal processes, training activities, development plans, and related HR reports are properly coordinated, documented, and aligned with approved HR policies and procedures.</p><p><strong>Key Tasks and Responsibilities</strong></p><p><strong>Performance Management</strong></p><ul><li>Support the implementation and administration of the Performance Management System (PMS).</li><li>Coordinate the annual performance appraisal cycle, including reminders, follow-ups, documentation, and submission tracking.</li><li>Communicate with Heads of Departments and Line Managers to ensure timely completion of performance appraisal reports.</li><li>Review submitted appraisal forms to ensure completeness and compliance with the approved HR process.</li><li>Maintain accurate records of employee performance appraisal reports and related documents.</li><li>Assist in analyzing performance appraisal outcomes to identify performance gaps, development needs, and areas for improvement.</li><li>Support the preparation of performance-related reports, summaries, and dashboards for HR and management review.</li><li>Follow up on probation performance evaluations and ensure timely submission from concerned departments.</li><li>Support departments in clarifying performance appraisal requirements, timelines, and documentation standards.</li></ul><p><strong>Learning and Development</strong></p><ul><li>Support the preparation and execution of the annual Learning and Development Plan based on organizational requirements, approved budgets, and identified training needs.</li><li>Coordinate training programs, workshops, certifications, and employee development initiatives.</li><li>Liaise with departments to identify training needs and development priorities.</li><li>Assist in conducting Training Needs Analysis (TNA) based on performance results, competency gaps, and departmental requirements.</li><li>Coordinate with internal and external training providers to arrange training sessions and development programs</li><li>Maintain and update training records, attendance sheets, evaluation forms, and training-related documentation.</li><li>Support the evaluation of training effectiveness through feedback analysis and post-training assessments</li><li>Maintain and update the approved training provider database.</li><li>Assist in preparing training utilization reports, training cost summaries, and development activity reports.</li><li>Support succession planning and internal talent development initiatives when required.</li></ul><p><strong>Employee Engagement</strong></p><ul><li>Plan and execute follow-up actions arising from Employee Opinion Survey results.</li><li>Own and drive the Onboarding Scheme, continuously improving the new joiner experience.</li><li>Organize Employee Team Building Activities and Away Days.</li><li>Coordinate the Lunch/Coffee with the CEO programme for new joiners.</li><li>Support the creation of an energetic and flexible office work environment.</li><li>Manage Internal Communications for employees related to HR announcements and initiatives.</li><li>Produce the Annual Report on New Joiner Satisfaction Survey results.</li><li>Support Employee Wellbeing, Health, and Fitness initiatives.</li><li>Administer the Employee Exit Survey and contribute to the Annual Exit Report</li></ul><p>Other duties assigned by the line manager.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree in Human Resources, Business Administration, or related field.</li><li>CIPD Level 3 or equivalent HR certification.</li><li>Fresh 3 years of HR experience with a focus on Talent Development &amp; Performance Officer</li><li>Good understanding of HR functions, especially performance management and employee development.</li><li>Strong coordination, follow-up, and organizational skills.</li><li>Good communication and interpersonal skills.</li><li>Ability to prepare reports, summaries, and presentations.</li><li>Good analytical skills and attention to detail.</li><li>Ability to handle confidential information with professionalism and discretion.</li><li>Proficiency in Microsoft Office, especially Excel, Word, and PowerPoint.</li><li>Ability to work with different departments and stakeholders.</li><li>Good command of English and Arabic, both written and spoken.</li></ul><p></p></section>

<ol type="a"><li><p>NDT Coordination</p></li><li><p>Witness and validate NDT activities such as RT, UT, MT, and PT.</p></li><li><p>Review NDT reports and ensure acceptance criteria compliance.</p></li><li><p>Documentation & Reporting</p></li><li><p>Review and endorse QA/QC documentation including:</p></li><li><p>Welding procedures (WPS/PQR)</p></li><li><p>Inspection reports</p></li><li><p>Material traceability records</p></li><li><p>Prepare daily/weekly inspection reports and submit to client/TPI agency.</p></li><li><p>Identify and report non-conformances (NCRs) and follow up on corrective actions.</p></li><li><p>Compliance & Standards</p></li><li><p>Ensure adherence to:&nbsp;AWS D1.1, ASME Section IX, ISO standards, Client specifications and project requirements</p></li><li><p>Verify material identification and traceability.</p></li><li><p>Stakeholder Coordination</p></li><li><p>Interface with contractor QA/QC, client representatives, and project team.</p></li><li><p>Provide technical clarification and inspection feedback.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol type="a"><li><p>Diploma / Degree in Mechanical Engineering or related discipline.</p></li><li><p>CSWIP 3.1 / AWS-CWI or equivalent (Mandatory).</p></li><li><p>CBT Certification (as per client/project requirements).</p></li><li><p>Knowledge of international codes and offshore fabrication standards.</p></li><li><p><strong>5–10 years in welding inspection.</strong></p><br><br></li></ol>

<p><h4>Description</h4> <p>Please submit your CV in English and indicate your level of English proficiency.</p> <p>Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems. Participation is project-based, not permanent employment.</p> <h4>What this opportunity involves</h4> <p>While each project involves unique tasks, contributors may:</p> <ul> <li>Evaluate AI-generated mortgage underwriting decisions across loan types (conforming, jumbo, FHA, VA, cash-out refinance);</li> <li>Create test cases involving qualifying income calculations for self-employed borrowers using Schedule C, K-1, and Schedule E;</li> <li>Draft and audit conditional approval letters and adverse action notices for Reg B / ECOA compliance;</li> <li>Distinguish Fannie Mae / Freddie Mac selling guide rules from lender overlays in jumbo and non-conforming loan scenarios;</li> <li>Document problem statements clearly and provide verified correct answers.</li> </ul> <h4>What we look for</h4> <p>This opportunity is a good fit for mortgage underwriters and loan origination professionals open to part-time, non-permanent projects. Ideally, contributors will have:</p> <ul> <li>Degree in finance, economics, business administration, accounting, real estate, or any related field;</li> <li>3+ years of mortgage, lending, real estate, or financial services experience;</li> <li>Current or recent experience in underwriting and origination or adjacent roles;</li> <li>Ability to calculate qualifying income for self-employed borrowers from IRS Forms 1040, Schedule C, Schedule E, and K-1;</li> <li>Deep familiarity with Fannie Mae / Freddie Mac selling guides and knowledge of Reg B, Reg Z, and TRID disclosure timing rules;</li> <li>Strong written English (C1+).</li> </ul> <h4>How it works</h4> <p>Apply? Pass qualification(s)? Join a project? Complete tasks? Get paid.</p> <h4>Project time expectations</h4> <p>For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements. This is an estimate, not a guaranteed workload, and applies only while the project is active.</p> <h4>Compensation</h4> <p>On this project, contributors can earn up to $50 per hour equivalent, depending on their level and pace of contribution.</p> <p>Compensation varies across projects depending on scope, complexity, and required expertise. Please note that other projects on the platform may offer different earning levels based on their requirements.</p></p><p></p>