PLC Engineer Jobs in Oman

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Engineer is responsible for executing, coordinating, and supporting all pre-commissioning and commissioning activities related to the telecommunications systems of a large-scale oil & gas / LNG facility. The role ensures that telecom systems are installed, tested, commissioned, and handed over safely and in compliance with project specifications, international standards, and applicable codes.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Review and understand telecom engineering documents, including specifications, drawings, data sheets, method statements, commissioning procedures, and vendor documentation.</li> <li>Participate in system walkdowns, punch listing, and verification of installation completeness for telecom systems.</li> <li>Verify correctness of installation for telecom equipment, cabling, fiber optic systems, racks, cabinets, and interfaces.</li> <li>Support preparation and updating of pre-commissioning and commissioning test packs.</li> <li>Ensure all telecom systems are mechanically complete and ready for commissioning activities.</li> <li>Coordinate with construction, quality, and engineering teams to resolve technical queries and punch items.</li> </ul> <p><strong>Commissioning & start-up</strong></p> <ul> <li>Execute and supervise commissioning activities for telecom systems, including functional testing, integration testing, and system validation.</li> <li>Perform system tests such as loop checks, signal verification, end-to-end testing, and redundancy checks.</li> <li>Interface with vendors, subcontractors, and other discipline engineers during commissioning activities.</li> <li>Support energization, SAT (Site Acceptance Tests), and system integration with ICSS, safety, and IT networks.</li> <li>Identify, troubleshoot, and resolve telecom-related issues during commissioning and start-up.</li> <li>Assist in preparing systems for Ready for Start-Up (RFSU) and operational handover.</li> </ul> <h4>Telecom systems scope (typical)</h4> <ul> <li>Telecom network infrastructure (fiber optic & copper)</li> <li>Telephone systems (PABX / IP telephony)</li> <li>Public address & general alarm (PAGA) systems</li> <li>CCTV & security surveillance systems</li> <li>Access control & intrusion detection systems</li> <li>Radio communication systems (TETRA / UHF / VHF)</li> <li>Data networks & telecom cabinets</li> <li>Interfaces with control and safety systems</li> </ul> <h4>Safety, quality & documentation</h4> <ul> <li>Strictly comply with HSE policies, procedures, and site safety requirements at all times.</li> <li>Participate in toolbox talks, job safety analyses (JSA), and risk assessments.</li> <li>Ensure commissioning activities are performed in accordance with approved procedures and quality standards.</li> <li>Support compilation of as-built documentation, test records, and commissioning dossiers.</li> <li>Contribute to lessons learned and commissioning close-out reports.</li> </ul> <h4>Interface & coordination</h4> <ul> <li>Work closely with commissioning management, discipline leads, construction teams, and vendors.</li> <li>Coordinate with operations and maintenance representatives during system handover.</li> <li>Support planning and sequencing of telecom commissioning activities in line with overall project milestones.</li> </ul> <h4>Qualification requirements</h4> <ul> <li>Bachelor’s degree in telecommunications engineering, electrical engineering, or related discipline.</li> <li>Minimum 5–8 years of experience in telecom engineering, with significant exposure to pre-commissioning and commissioning activities.</li> <li>Proven experience on LNG, gas processing, or large-scale oil & gas projects.</li> <li>Strong understanding of international standards (IEC, ITU, IEEE) relevant to telecom systems.</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Engineer is responsible for executing, coordinating, and supporting all pre-commissioning and commissioning activities related to the telecommunications systems of a large-scale oil & gas / LNG facility. The role ensures that telecom systems are installed, tested, commissioned, and handed over safely and in compliance with project specifications, international standards, and applicable codes.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Review and understand telecom engineering documents, including specifications, drawings, data sheets, method statements, commissioning procedures, and vendor documentation.</li> <li>Participate in system walkdowns, punch listing, and verification of installation completeness for telecom systems.</li> <li>Verify correctness of installation for telecom equipment, cabling, fiber optic systems, racks, cabinets, and interfaces.</li> <li>Support preparation and updating of pre-commissioning and commissioning test packs.</li> <li>Ensure all telecom systems are mechanically complete and ready for commissioning activities.</li> <li>Coordinate with construction, quality, and engineering teams to resolve technical queries and punch items.</li> </ul> <p><strong>Commissioning & start-up</strong></p> <ul> <li>Execute and supervise commissioning activities for telecom systems, including functional testing, integration testing, and system validation.</li> <li>Perform system tests such as loop checks, signal verification, end-to-end testing, and redundancy checks.</li> <li>Interface with vendors, subcontractors, and other discipline engineers during commissioning activities.</li> <li>Support energization, SAT (Site Acceptance Tests), and system integration with ICSS, safety, and IT networks.</li> <li>Identify, troubleshoot, and resolve telecom-related issues during commissioning and start-up.</li> <li>Assist in preparing systems for Ready for Start-Up (RFSU) and operational handover.</li> </ul> <h4>Telecom systems scope (typical)</h4> <ul> <li>Telecom network infrastructure (fiber optic & copper)</li> <li>Telephone systems (PABX / IP telephony)</li> <li>Public address & general alarm (PAGA) systems</li> <li>CCTV & security surveillance systems</li> <li>Access control & intrusion detection systems</li> <li>Radio communication systems (TETRA / UHF / VHF)</li> <li>Data networks & telecom cabinets</li> <li>Interfaces with control and safety systems</li> </ul> <h4>Safety, quality & documentation</h4> <ul> <li>Strictly comply with HSE policies, procedures, and site safety requirements at all times.</li> <li>Participate in toolbox talks, job safety analyses (JSA), and risk assessments.</li> <li>Ensure commissioning activities are performed in accordance with approved procedures and quality standards.</li> <li>Support compilation of as-built documentation, test records, and commissioning dossiers.</li> <li>Contribute to lessons learned and commissioning close-out reports.</li> </ul> <h4>Interface & coordination</h4> <ul> <li>Work closely with commissioning management, discipline leads, construction teams, and vendors.</li> <li>Coordinate with operations and maintenance representatives during system handover.</li> <li>Support planning and sequencing of telecom commissioning activities in line with overall project milestones.</li> </ul> <h4>Qualification requirements</h4> <ul> <li>Bachelor’s degree in telecommunications engineering, electrical engineering, or related discipline.</li> <li>Minimum 5–8 years of experience in telecom engineering, with significant exposure to pre-commissioning and commissioning activities.</li> <li>Proven experience on LNG, gas processing, or large-scale oil & gas projects.</li> <li>Strong understanding of international standards (IEC, ITU, IEEE) relevant to telecom systems.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Key Responsibilities Review and validate SCADA design documents, control philosophy, and I/O lists against contract specification and client requirements Supervise installation of RTUs, PLCs, HMI panels, and instrumentation across all project sites Configure and commission SCADA software, communication networks (radio, fibre, GSM/GPRS), and historian systems Coordinate with civil, mechanical, and electrical teams to sequence SCADA works against the overall construction programme Manage subcontractors and vendors supplying SCADA hardware and integration services Conduct FAT and SAT for control panels and integrated systems Prepare and execute loop testing, functional testing, and pre-commissioning checklists Interface with the Supervising Engineer on inspection and approval of SCADA works Maintain as-built drawings, control narratives, and O&amp;M documentation for handover Support RFI resolution on SCADA and instrumentation queries Train client operations staff on system use ahead of taking over</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Work share project execution experience.</li><li>Knowledge of national/international electrical codes and standards.</li><li>Rich knowledge and experience in specifications, selection, design and engineering of DCS/ESD/PLC/SCADA systems, including FF technology.</li><li>Hands-on experience in developing &amp; modification of plc logics and SCADA screens as per the requirements</li><li>Good knowledge of HAZOP/SIL study, including SIL calculation</li><li>Hands-on experience of FAT (Factory Acceptance Test) of various systems like DCS/ESD/SCADA/PLC, etc.</li><li>Sizing of Various instrument items like flow element, control valve, safety relief valve, wake frequency of thermo-well, etc.</li><li>FF Segment Calculation and design</li><li>Hands-on experience in handling instrumentation of critical packages like compressors, blowers, fire heaters, turbines, etc.</li><li>Detailed engineering to develop various instrumentation layouts and MT</li><li>Detailed engineering to develop various instrumentation documents like Logic Diagram, Control Narrative, Instrumented Protection Function Narratives, wiring connection details and loop diagrams</li><li>Manpower Planning, Scheduling, Cost Control skills</li><li>Ability to interact with other design groups in the office.</li><li>Excellent oral and written communication skills in English.</li><li>Compliance with budget, schedule and quality within allocated resources.</li><li>Vast work experience in Instrumentation Engineering and Design for Oil and Gas Industries, Petroleum and Refinery Units, chemical/Petrochemical/ Fertilizer plants, etc.</li><li>Good Experience in handling projects like developing Front End Engineering &amp; Design (FEED) Packages, executing Detailed Engineering services on an EPCM basis and PMC services</li><li>Experience as Team Leader</li></ul><p></p></section>

<p>The Automation Engineer is responsible for ensuring the safe, reliable, and efficient operation of all automation, control, PLC, SCADA, communication, and industrial network systems supporting the container terminal. The role focuses on maintaining and improving the performance of semi-automated Ship-to-Shore (STS) cranes, Rubber-Tyred Gantry (RTG) cranes, and associated terminal automation systems to maximize equipment availability and operational efficiency. The Automation Engineer works closely with Maintenance, Operations, IT, OEMs, and contractors to troubleshoot automation issues, implement system improvements, and support digitalization and predictive maintenance initiatives.</p><p>KEY ACCOUNTABILITIES</p><p>Automation &amp; Control Systems</p><ul><li>Maintain, troubleshoot, and optimize PLC, HMI, SCADA, and control systems for semi-automated STS and RTG cranes.</li><li>Perform software modifications, diagnostics, commissioning, and system testing.</li><li>Ensure all automation systems operate safely, reliably, and in accordance with OEM standards.</li></ul><p>PLC Programming &amp; Industrial Control</p><ul><li>Develop, modify, troubleshoot, and maintain PLC programs using Siemens TIA Portal/STEP 7 and other OEM platforms.</li><li>Configure and maintain remote I/O, safety PLCs, VFDs, encoders, sensors, laser positioning, and motion control systems.</li><li>Perform software backups, version control, and restoration of PLC and automation programs.</li></ul><p>Automation Servers &amp; OT Infrastructure</p><ul><li>Maintain the automation server infrastructure supporting crane operations, including application servers, engineering workstations, databases, and virtual environments.</li><li>Monitor server performance, system health, storage capacity, backups, redundancy, and disaster recovery.</li><li>Coordinate software updates, patches, and system upgrades with OEMs and the IT Department while minimizing operational disruption.</li></ul><p>Remote Operation &amp; Communication Systems</p><ul><li>Maintain and troubleshoot communication between Liebherr Automation Servers, STS/RTG cranes, Remote Operator Stations (ROS), Engineering Workstations, and the Terminal Operating System (TOS).</li><li>Support and maintain the wireless/radio communication network used for remote operation of RTGs, ensuring reliable communication between the RTGs, ROS stations, and central automation servers.</li><li>Diagnose and resolve communication failures, latency, synchronization issues, and network interruptions affecting crane operation.</li></ul><p>Industrial Networks</p><ul><li>Maintain and troubleshoot industrial communication networks including Fiber Optic networks, Industrial Ethernet, Profinet, Profibus, Modbus TCP/IP, Ethernet/IP, managed switches, routers, wireless access points, and communication gateways.</li><li>Ensure high network availability, redundancy, cybersecurity, and reliable data exchange between automation devices.</li></ul><p>Camera &amp; Vision Systems</p><ul><li>Maintain, configure, and troubleshoot all crane camera and vision systems, including spreader, trolley, boom, gantry, hoist, anti-collision, OCR, and CCTV cameras.</li><li>Ensure reliable video transmission, recording, and display at Remote Operator Stations.</li><li>Coordinate calibration, replacement, and commissioning of cameras and vision equipment.</li></ul><p>System Integration</p><ul><li>Support integration and communication between crane automation systems, PLCs, SCADA, ROS, TOS, CMMS, drive systems, anti-collision systems, positioning systems, and other terminal operational technologies.</li><li>Work closely with OEMs and IT to ensure seamless integration of new automation technologies and software upgrades.</li></ul><p>CMMS &amp; Reliability</p><ul><li>Develop preventive maintenance plans for automation systems using the CMMS.</li><li>Record maintenance activities, software revisions, equipment history, and recurring failures.</li><li>Perform Root Cause Analysis (RCA) and implement corrective actions to improve equipment reliability and reduce downtime.</li></ul><p>Cybersecurity &amp; Data Integrity</p><ul><li>Support OT cybersecurity by maintaining secure user access, backup procedures, antivirus protection, network segmentation, and disaster recovery plans.</li><li>Ensure automation software, PLC programs, and server configurations are securely backed up and protected against unauthorized access.</li></ul><p>Technical Support &amp; Continuous Improvement</p><ul><li>Provide technical support during equipment breakdowns and commissioning activities.</li><li>Lead automation fault investigations and recommend system improvements to increase equipment availability and operational efficiency.</li><li>Evaluate new technologies and recommend automation enhancements that improve safety, reliability, and productivity.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in electrical engineering, Automation Engineering, Control Systems, Mechatronics, or a related discipline.</li><li>Professional certification in PLC programming, industrial automation, or control systems is preferred.</li><li>Minimum 5 years of experience in industrial automation or electrical control systems, preferably within a container terminal, port, or heavy industrial environment.</li><li>Proven experience with semi-automated STS and RTG cranes and OEM automation systems (e.g., Liebherr, Siemens, ABB, Konecranes, or ZPMC).</li><li>Hands-on experience with PLC, SCADA, HMI, VFDs, industrial networks, automation servers, Remote Operator Stations (ROS), radio communication systems, camera systems, and Terminal Operating System (TOS) integration.</li><li>Experience using CMMS/EAM systems (e.g., SAP PM, Maximo, Hexagon) for maintenance planning and asset management.</li><li>Strong troubleshooting, commissioning, Root Cause Analysis (RCA), and contractor/OEM coordination experience.</li></ul>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job title </b>Engineer I&amp;C Central Assets Management Grade Stream Commercial &amp; Downstream RPI Function Central Assets Management Location Oman Suhar Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Team Lead Central Instru.&amp; Auto.Central Assets Management Direct reports 0 Job purpose Designs, analyzes, implements and maintain control systems to regulate and optimize various processes in the RPI areas, under Team Leader Control Systems scope, acting as team player and part of the site s management team using his/her technical expertise to develop solutions regarding quality problems of control system, including all aspects of maintaining control system asset installed based, supporting on new automation projects, and leading the troubleshooting/repair/ and maintaining control system equipment by: (1) manage and ensure the availability of the site s Emergency Shutdown System (ESD), the Distributed Control System (DCS), and PLC-based control loops while proactively promote process safety initiatives, (2) Develop solutions to maintenance and quality problems of control systems in Suhar plants (SR2),(3) supporting on new automation projects, and (4) Interact with Operations, Engineering, Maintenance, Safety, Environmental personnel, and third-party contractors Control Systems works at RPI in designated areas, (5) Providing professional technical advice, guidance and support to the team, (6) Identify opportunities of improvement, as well as assess and support improvement proposals from others, and (7) Guide young engineers in related Control System matters; in order to ensure that the assets and equipment are available at all times, minimizing the down time and meeting the operational targets that support the gross margin / profitability with a sufficient organizational capability for business continuity while identifying &amp; developing talent people to as feeder for OQ talent pipeline. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Scope RPI &amp; Plastic Assets (SR/AP, MAF, Plastics &amp; NGLE) Pressure transmitters These instruments measure the pressure of fluids or gases in pipes, tanks, and vessels. They are used to ensure that the process is operating within safe pressure limits. Temperature transmitters gauges, Thermowells, Thermocouples, Thermocouple Assemblies. These instruments measure the temperature of fluids or gases in various process equipment, such as heat exchangers, reactors, and distillation columns. They help to ensure that the process operates within the desired temperature range. Flow meters These instruments measure the flow rate of liquids and gases in pipes and vessels. They are used to monitor the amount of material being transferred between different process stages. Level transmitters These instruments measure the level of liquids and solids in tanks and vessels. They are used to ensure that tanks are not overfilled or emptied too quickly, which could result in safety hazards or process disruptions. Analyzers These instruments measure the chemical composition of process streams. They are used to monitor the quality of products and ensure that the process is operating within the required specifications Control valves / Instrument Manifold / Positioners. These are critical components that control the flow of fluids in process equipment. They are used to adjust the flow rate, pressure, and temperature of the process stream to maintain optimal process conditions. Safety relief valves These are critical components that protect equipment and personnel from overpressure conditions. They are designed to open automatically when the pressure exceeds a predetermined level, releasing excess pressure and preventing equipment damage or personnel injury. Distributed Control System (DCS) This refers to a system used to control complex processes in industries such as manufacturing, oil and gas, power generation, and more. DCS systems consist of multiple interconnected control elements that work together to monitor and manage various aspects of a process. Programmable Logic Control (PLC) A Programmable Logic Controller (PLC) is a specialized digital computer used in industrial and manufacturing settings to control and automate various processes and machinery. PLCs are designed to handle real-time control tasks, making them integral to the automation of complex systems. Emergency Shutdown System (ESD) An Emergency Shutdown System (ESD) is a safety mechanism implemented in industrial facilities and processes to bring the operation rapidly and automatically to a safe state in the event of an emergency or hazardous situation. The primary goal of an ESD system is to protect personnel, equipment, and the environment by quickly shutting down critical processes or equipment when conditions deviate from safe operating parameters. Machine Monitoring and Protection System A Machine Monitoring and Protection System is a specialized technology used in industrial settings to monitor, analyze, and safeguard the performance and condition of machinery and equipment. The primary purpose is to ensure the optimal operation of machines, prevent unexpected failures, and enhance overall productivity by providing real-time insights into the health and status of critical equipment. OT cyber security OT cybersecurity involves securing the practices and technologies used to monitor, detect, and control changes to OT infrastructure, ensuring the safety, integrity, and continuity of operations. OT includes systems like industrial control systems (ICS), supervisory control and data acquisition (SCADA) systems, distributed control systems (DCS), and programmable logic controllers (PLC) Key interactions Internal: The Senior/Control System Engineer will interact with Operations, Engineering, Maintenance, Safety, Environmental personnel, and third-party contractors Control Systems works at RPI in designated areas. External: Vendors, contractors, manufacturers. Notable Working Conditions.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Qualifications for this position is a bachelor s degree in electrical / Electronic or Instrumentation Engineering or similar. Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p> <p>8+ years of relevant experience</p> <ul> <li>Relevant experience in similar role Control System in refinery &amp; petrochemical plants maintenance or proven merit on the required competency.</li> <li>Relevant experience in maintenance role within the Oil &amp; Gas / Refinery / Petrochemical industry, preferably with experience in the area/assets associated with this position.</li> <li>Knowledge of the refinery process and plant equipment.</li> <li>Experience in Developing/reviewing maintenance work instruction</li> <li>Sound judgment in technical matters with good skills in engineering field.</li> <li>Proven experience with Personal Safety Management.</li> <li>Good knowledge of HSE / SCE QA/QC, equipment &amp; plans/ standards</li> <li>Skill either in Yokogawa, Honeywell, or Schneider DCS and ESD is required.</li> <li>Skill either in Siemens, Triconex or Allen Bradley PLC is required.</li> <li>Skill in machine monitoring systems such as Bently Nevada or Emerson CSI</li> <li>Knowledgeable on machine protection systems such as Woodward, and CCC.</li> <li>Sound understanding of IEC62443 specifically focusing on maintenance of the OT equipment s.</li> <li>Experience in bid evaluation and knowledge of contracts management &amp; spare parts optimization.</li> </ul> <p><strong>Soft:</strong></p> <ul> <li>Strong analytical and problem-solving skills</li> <li>Result oriented.</li> <li>Analytical thinking.</li> <li>Time management</li> </ul> <p><strong>Technical</strong></p> <ul> <li>Computer literacy including MS Office</li> <li>Process automation protocols, such as (HART, Profibus, SDS).</li> <li>Maintaining and troubleshooting of Distributed Control System.</li> <li>Maintaining and troubleshooting PLCs.</li> <li>Develop/review maintenance work instruction.</li> <li>Writing technical reports and documentation,</li> <li>Use of mathematical models and computer simulations to analyze system behavior and make design decisions</li> <li>Full awareness of MOC Management of change procedure and implementation</li> <li>Familiar with SAP system transactions &amp; reports.</li> <li>Participate/Lead RCA &amp; HAZOP study.</li> <li>Develop/review Lifecycle Management Plan to overcome the obsolescence and support issues.</li> <li>Understanding of international standards related to control systems.</li> <li>Bids evaluation.</li> </ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Graduate Electrical Engineer or I&amp;amp;C with 7-10 years of experience in estimation of <br><br>EPC/Turnkey projects, should estimate projects related to Electrical, Instrumentation<br><br>&amp;amp; Control, process equipment installations, controls system upgrade, PLC/SCADA,<br><br>Cable installation, MCC, VFD, Switch gear installation and related scope of work.<br><br>Estimation of Saudi Aramco, SABIC projects shall be added advantage.<br><br>Graduate Mechanical Engineer with 7-10 years of experience in estimation of <br><br>EPC/Turnkey projects, should estimate projects related to Oil &amp;amp; gas pipeline<br><br>installation, process equipment installations, Tanks, structure installation and related<br><br>scope of work. Estimation of Saudi Aramco, SABIC projects shall be added<br><br>advantage<br><br></span><br><span>RequirementsEstimation Engineer (Mechanical)<br><br>Estimation Engineer (Electrical/I&amp;C)<br><br></span><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job title</b> Engineer I&amp;C Central Assets Management Grade Stream Commercial &amp; Downstream RPI Function Central Assets Management Location Oman Suhar Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Team Lead Central Instru.&amp; Auto.Central Assets Management Direct reports 0 Job purpose Designs, analyzes, implements and maintain control systems to regulate and optimize various processes in the RPI areas, under Team Leader Control Systems scope, acting as team player and part of the site s management team using his/her technical expertise to develop solutions regarding quality problems of control system, including all aspects of maintaining control system asset installed based, supporting on new automation projects, and leading the troubleshooting/repair/ and maintaining control system equipment by: (1) manage and ensure the availability of the site s Emergency Shutdown System (ESD), the Distributed Control System (DCS), and PLC-based control loops while proactively promote process safety initiatives, (2) Develop solutions to maintenance and quality problems of control systems in Suhar plants (SR2),(3) supporting on new automation projects, and (4) Interact with Operations, Engineering, Maintenance, Safety, Environmental personnel, and third-party contractors Control Systems works at RPI in designated areas, (5) Providing professional technical advice, guidance and support to the team, (6) Identify opportunities of improvement, as well as assess and support improvement proposals from others, and (7) Guide young engineers in related Control System matters; in order to ensure that the assets and equipment are available at all times, minimizing the down time and meeting the operational targets that support the gross margin / profitability with a sufficient organizational capability for business continuity while identifying &amp; developing talent people to as feeder for OQ talent pipeline.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Scope RPI &amp; Plastic Assets (SR/AP, MAF, Plastics &amp; NGLE) Pressure transmitters These instruments measure the pressure of fluids or gases in pipes, tanks, and vessels. They are used to ensure that the process is operating within safe pressure limits. Temperature transmitters gauges, Thermowells, Thermocouples, Thermocouple Assemblies. These instruments measure the temperature of fluids or gases in various process equipment, such as heat exchangers, reactors, and distillation columns. They help to ensure that the process operates within the desired temperature range. Flow meters These instruments measure the flow rate of liquids and gases in pipes and vessels. They are used to monitor the amount of material being transferred between different process stages. Level transmitters These instruments measure the level of liquids and solids in tanks and vessels. They are used to ensure that tanks are not overfilled or emptied too quickly, which could result in safety hazards or process disruptions. Analyzers These instruments measure the chemical composition of process streams. They are used to monitor the quality of products and ensure that the process is operating within the required specifications Control valves / Instrument Manifold / Positioners. These are critical components that control the flow of fluids in process equipment. They are used to adjust the flow rate, pressure, and temperature of the process stream to maintain optimal process conditions. Safety relief valves These are critical components that protect equipment and personnel from overpressure conditions. They are designed to open automatically when the pressure exceeds a predetermined level, releasing excess pressure and preventing equipment damage or personnel injury. Distributed Control System (DCS) This refers to a system used to control complex processes in industries such as manufacturing, oil and gas, power generation, and more. DCS systems consist of multiple interconnected control elements that work together to monitor and manage various aspects of a process. Programmable Logic Control (PLC) A Programmable Logic Controller (PLC) is a specialized digital computer used in industrial and manufacturing settings to control and automate various processes and machinery. PLCs are designed to handle real-time control tasks, making them integral to the automation of complex systems. Emergency Shutdown System (ESD) An Emergency Shutdown System (ESD) is a safety mechanism implemented in industrial facilities and processes to bring the operation rapidly and automatically to a safe state in the event of an emergency or hazardous situation. The primary goal of an ESD system is to protect personnel, equipment, and the environment by quickly shutting down critical processes or equipment when conditions deviate from safe operating parameters. Machine Monitoring and Protection System A Machine Monitoring and Protection System is a specialized technology used in industrial settings to monitor, analyze, and safeguard the performance and condition of machinery and equipment. The primary purpose is to ensure the optimal operation of machines, prevent unexpected failures, and enhance overall productivity by providing real-time insights into the health and status of critical equipment. OT cyber security OT cybersecurity involves securing the practices and technologies used to monitor, detect, and control changes to OT infrastructure, ensuring the safety, integrity, and continuity of operations. OT includes systems like industrial control systems (ICS), supervisory control and data acquisition (SCADA) systems, distributed control systems (DCS), and programmable logic controllers (PLC)</p><p>Key interactions Internal: The Senior/Control System Engineer will interact with Operations, Engineering, Maintenance, Safety, Environmental personnel, and third-party contractors Control Systems works at RPI in designated areas. External: Vendors, contractors, manufacturers. Notable Working Conditions. Field Operations and office environment, Moderate to extensive computer screen use.</p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Qualifications for this position is a bachelor s degree in electrical / Electronic or Instrumentation Engineering or similar. Language requirements Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector. Job Title: Automation Engineer Reports To: Engineering Manager / Automation Supervisor Job Details Number of Vacancies: 4 Positions Salary Range: OMR PHONE_NUMBER per month Work Location: All regions of Oman except Dhofar (Preference will be given to applicants from the local governorate) ________________________________________ Department: Engineering / Operations ________________________________________ Job Purpose The Automation Engineer is responsible for designing, implementing, maintaining, and optimizing automation and control systems to ensure efficient, reliable, and safe operation of industrial processes and equipment. ________________________________________ Key Responsibilities Design, develop, and implement automation and control solutions for operational facilities. Configure, program, and troubleshoot PLC, SCADA, HMI, and DCS systems. Monitor system performance and identify opportunities for process improvement and optimization. Conduct preventive and corrective maintenance of automation equipment and control systems. Support commissioning, testing, and startup activities for new projects and system upgrades. Analyze system faults and implement corrective actions to minimize downtime. Prepare technical documentation, reports, drawings, and operating procedures. Ensure compliance with company standards, safety regulations, and industry best practices. Coordinate with operations, maintenance, and project teams to support business objectives. Provide technical support and training to operations and maintenance personnel. ________________________________________ Qualifications Bachelor s Degree in Automation Engineering, Electrical Engineering, Electronics Engineering, Instrumentation Engineering, or a related field. ________________________________________ Experience Practical Experience: 0 (No prior work experience required) Internship or academic project experience in automation or control systems is an advantage. ________________________________________ Technical Skills Basic knowledge of PLC programming (Siemens, Allen-Bradley, Schneider, ABB). Understanding of SCADA and HMI systems. Basic knowledge of instrumentation, control systems, and industrial automation technologies. Familiarity with industrial communication protocols such as Modbus, Profibus, Profinet, and Ethernet/IP is an advantage. Ability to read and interpret electrical and control system drawings. ________________________________________ Soft Skills Strong analytical and problem-solving skills. Good communication and teamwork abilities. Willingness to learn and develop technical skills. Ability to work under pressure and manage multiple tasks. Good organizational and documentation skills. ________________________________________ Working Conditions Office and field-based work environments. Site visits, troubleshooting activities, and support during shutdowns or emergencies may be required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualifications Bachelor s Degree in Automation Engineering, Electrical Engineering, Electronics Engineering, Instrumentation Engineering, or a related field.</p><p>Experience Practical Experience: 0 (No prior work experience required) Internship or academic project experience in automation or control systems is an advantage.</p><p>Technical Skills Basic knowledge of PLC programming (Siemens, Allen-Bradley, Schneider, ABB). Understanding of SCADA and HMI systems. Basic knowledge of instrumentation, control systems, and industrial automation technologies. Familiarity with industrial communication protocols such as Modbus, Profibus, Profinet, and Ethernet/IP is an advantage. Ability to read and interpret electrical and control system drawings.</p><p>Soft Skills Strong analytical and problem-solving skills. Good communication and teamwork abilities. Willingness to learn and develop technical skills. Ability to work under pressure and manage multiple tasks. Good organizational and documentation skills.</p><p>Working Conditions Office and field-based work environments. Site visits, troubleshooting activities, and support during shutdowns or emergencies may be required.</p><p>Application Note : The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>MEP MAINTENANCE ENGINEER</p><p>Coordinate technicians and contractors for planned and reactive maintenance Supervisor.</p><p>Understanding of SLAs, KPIs, and asset lifecycle management</p><p>Review and ensure implementation of preventive maintenance schedules.</p><p>Monitor system performance using BMS and CMMS platforms.</p><p>Serve as the primary technical liaison between the facilities management team and the clients representatives Attend regular meetings with the client to discuss maintenance activities, ongoing issues, and upcoming projects.</p><p>Provide timely and clear updates, technical reports, and recommendations to the client.</p><p>Ensure client satisfaction by promptly addressing concerns and coordinating effective solutions.</p><p>Conduct site inspections, issue technical reports, CAPA , HSE Reports and ensure safety compliance and well versed with FM Industry standards</p><p>INSTRUMENTATION ENGINEER esign, install, test, and commission instrumentation and control systems for industrial projects.</p><p>Develop and review instrumentation drawings, P&amp;IDs, loop diagrams, hook-up drawings, and cable schedules.</p><p>Select and specify field instruments such as pressure, temperature, flow, and level transmitters.</p><p>Install, calibrate, troubleshoot, and maintain instrumentation equipment.</p><p>Configure and maintain PLC, DCS, SCADA, and control systems.</p><p>Perform preventive, corrective, and predictive maintenance of instrumentation systems.</p><p>Conduct loop checking, functional testing, FAT, SAT, and commissioning activities.</p><p>Diagnose and resolve instrumentation and control system faults to minimize downtime.</p><p>Ensure all instrumentation complies with project specifications, industry standards, and safety regulations.</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Data Engineer IA orienté-e métier – Support et Service F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Rejoindre Safran Aircraft Engines, c'est contribuer à façonner l'avenir de l'aviation, avec une motorisation plus verte, plus économe et plus durable.<br>Au sein de la direction des Opérations Clients, nous pilotons la relation Support et Service avec l'ensemble de nos clients, telle que la facturation, les garanties, les contrats, le leasing, etc.. La donnée est au cœur de la performance et de la transformation digitale !<br>Nous avons identifié des leviers de croissance majeurs liés à l'exploitation de nos données. Pour transformer ces opportunités en outils de production/process fiables et rentables, nous créons ce poste d'Ingénieur IA orienté métier. Vous serez le pont indispensable entre la complexité algorithmique et les besoins pragmatiques de nos utilisateurs finaux en étant un véritable architecte de solutions concrètes !<br>Votre rôle sera de concevoir, déployer et maintenir des solutions d'IA qui répondent à des problématiques business réelles. Vous serez un véritable acteur de la maturité data de Safran Aircraft Engines et un partenaire privilégié des équipes de l'ensemble de nos services qui pilotent le Support et Service, chacun avec des business models et pratiques propres. <br>Vos missions : Transformer la donnée en valeur d'usage<br>• Analyse du besoin métier : Collaborer avec les directions opérationnelles pour traduire leurs enjeux en spécifications techniques<br>• Conception et Développement : Sélectionner les architectures adaptées (s'appuyer sur une IA interne Secured ChatGPT, Copilot / Copilot Premium – LLM, ML classique ou Deep Learning selon les cas) et développer les modèles en privilégiant la robustesse et l'explicabilité<br>• Industrialisation : Assurer le passage du prototype (PoC) à la mise en production, en veillant à la scalabilité et au monitoring des performances<br>• Vulgarisation et Accompagnement : Présenter les résultats aux parties prenantes non-techniques et accompagner le changement pour garantir l'adoption des outils créés<br>• Veille technologique : Identifier les nouvelles tendances IA applicables directement à notre secteur d'activité pour maintenir notre avantage compétitif<br>• Suivre les KPI et proposer des plans d'amélioration continue, en particulier sur le suivi des montées de version des IA</p><br><br><p>Pourquoi nous rejoindre ?<br>• Vous contribuerez directement à la transformation digitale et commerciale d'un grand acteur de l'aéronautique<br>• Vous serez au cœur d'un projet stratégique : utiliser de la donnée fiable, utile et créatrice de valeur<br>• Vous travaillerez dans un environnement collaboratif, où la curiosité et la créativité sont encouragées<br>• Vous développerez une double compétence IA/data et business Support et Service, précieuse pour la suite de votre carrière</p><br><br><p>Formation :<br>• Bac +5 (école d'ingénieur, école de commerce ou université) avec spécialisation en IA ou domaine connexe<br>• 3 ans d'expérience minimum sur un poste équivalent, idéalement acquise dans un environnement où l'IA est intégrée à un produit ou un service final<br>Compétences techniques<br>- Maîtrise de la Stack Data : Python (Expert), SQL, et les bibliothèques standards (Pandas, Scikit-learn ou PyTorch (TensorFlow apprécié)<br>- LLMs : Expérience dans l'implémentation de solutions type RAG, fine-tuning ou utilisation d'APIs — maîtrise de LangChain ou LlamaIndex<br>- Prompt engineering et évaluation de sorties LLM<br>- MLOps &amp; Cloud : MLflow ou équivalent, Docker (Kubernetes apprécié), et AWS (SageMaker apprécié)<br>- Aisance dans la manipulation de données multi-sources (CRM, ERP, fichiers plats, etc.)<br>Environnement &amp; outils disponibles<br>Vous évoluerez dans un environnement où la transformation digitale est déjà engagée : ChatGPT Secured déployé en interne, Microsoft Copilot / Copilot Premium intégré aux outils collaboratifs, et une infrastructure Cloud AWS en place.<br>Compétences comportementales : Equilibre entre rigueur technique et vision métier<br>• Sens du "Produit" : Vous ne développez pas pour la beauté de l'algorithme, mais pour résoudre un problème / améliorer un process<br>• Excellente Communication : Capacité à expliquer des concepts complexes de manière simple à des décideurs et des utilisateurs finaux<br>• Autonomie et Esprit Critique : Savoir dire "non" à une solution IA si une règle métier simple est plus efficace.<br>• Esprit d'équipe et d'entraide<br>• Esprit analytique, rigueur et sens du détail<br>• Pédagogie et envie de faire grandir la culture data autour de soi<br>• Curiosité, esprit d'innovation et goût du challenge<br>• Force de proposition dans l'amélioration continue<br>• Langues : Français et anglais professionnel</p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for the maintenance of field instruments related large water distribution and transmission Network Systems</p><p>Operate and monitor the SCADA system for the water supply network, including pumping stations, reservoirs, tanker filling stations, and borewells to ensure smooth and reliable operation. Monitor real-time parameters such as flow, pressure, level, pump status, and valve status, water quality parameters. Identify alarms, faults, and abnormal conditions and take corrective actions. Ensure continuous communication between SCADA, RTU/PLC, and field devices. SCADA system configuration, diagnostics, and troubleshooting.</p><p>Check the cost as per budget.</p><p>Minimum 4-Years working experience for the Operation and Maintenance of Various types of field instruments. Responsible for Instrument data sheets, drawings, P&amp; Ids, I/O wiring diagrams, charts, specifications, graphs, charts, etc. Supervise and directs all maintenance personnel in accordance with established policies and procedures. Maintain and troubleshoot field instruments including: o Flowmeters (electromagnetic / ultrasonic) o Pressure transmitters o Level transmitters o Control valves and actuators o Water Quality Analyzer (PH,Conductivity, chlorine and turbidity) Perform calibration checks and ensure instrument accuracy. Replace or repair faulty instruments as required. Support PLC/RTU configuration, Programming, diagnostics, and troubleshooting. Maintain Modbus RTU/TCP communication between instruments, RTUs, and SCADA. Assist in modification of logic and communication settings when required. Attend all the work orders given by Client regarding identification &amp; troubleshooting of issues related to SCADA &amp; PLC. Review the implementation of measuring devices or new control systems. Ensure each part is installed properly and conduct test runs before initiating actual operations. Perform scheduled preventive maintenance of SCADA and instrumentation systems. Attend breakdowns and restore system functionality in minimum downtime. Maintain maintenance logs, reports, and service records.</p><p>Keep Project Manager informed of all unusual conditions or maintenance problems. Assure that the entire plant and all equipments are in proper operating condition with proper data Management &amp; SCADA control Cooperates with site team to keep records of maintenance and service records of equipments. Supervise and directs all maintenance personnel in accordance with established policies and procedures.</p><p>Prepare and recommend specifications for equipment and material purchases. Report to Maintenance Manager Advise on Technical Support aspects Be fully aware of Contract requirements Observe procedures as required by the Contract Coordinate and monitor the preparation and submission of Drawings. Co ordinate with the external agencies like Omantel And PAEW for getting permissions and approvals Prepare Method Statements, Liaise with the Client Engineer. Attend relevant meetings with Project Manager. Ensure adequate protection of equipment at all times. Ensure Health &amp; Safety is adequately observed.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum 4-Years working experience for the Operation and Maintenance of Various types of field instruments.</p><p>Responsible for Instrument data sheets, drawings, P&amp; Ids, I/O wiring diagrams, charts, specifications, graphs, charts, etc.</p><p>Supervise and directs all maintenance personnel in accordance with established policies and procedures.</p><p>Maintain and troubleshoot field instruments including:</p><ul><li>Flowmeters (electromagnetic / ultrasonic)</li><li>Pressure transmitters</li><li>Level transmitters</li><li>Control valves and actuators</li><li>Water Quality Analyzer (PH,Conductivity, chlorine and turbidity)</li></ul><p>Perform calibration checks and ensure instrument accuracy.</p><p>Replace or repair faulty instruments as required.</p><p>Support PLC/RTU configuration, Programming, diagnostics, and troubleshooting.</p><p>Maintain Modbus RTU/TCP communication between instruments, RTUs, and SCADA.</p><p>Assist in modification of logic and communication settings when required.</p><p>Attend all the work orders given by Client regarding identification &amp; troubleshooting of issues related to SCADA &amp; PLC.</p><p>Review the implementation of measuring devices or new control systems.</p><p>Ensure each part is installed properly and conduct test runs before initiating actual operations.</p><p>Perform scheduled preventive maintenance of SCADA and instrumentation systems.</p><p>Attend breakdowns and restore system functionality in minimum downtime.</p><p>Maintain maintenance logs, reports, and service records.</p><p>Keep Project Manager informed of all unusual conditions or maintenance problems.</p><p>Assure that the entire plant and all equipments are in proper operating condition with proper data Management &amp; SCADA control</p><p>Cooperates with site team to keep records of maintenance and service records of equipments.</p><p>Supervise and directs all maintenance personnel in accordance with established policies and procedures.</p><p>Prepare and recommend specifications for equipment and material purchases.</p><p>Report to Maintenance Manager</p><p>Advise on Technical Support aspects</p><p>Be fully aware of Contract requirements</p><p>Observe procedures as required by the Contract</p><p>Coordinate and monitor the preparation and submission of Drawings.</p><p>Co ordinate with the external agencies like Omantel And PAEW for getting permissions and approvals</p><p>Prepare Method Statements, Liaise with the Client Engineer.</p><p>Attend relevant meetings with Project Manager.</p><p>Ensure adequate protection of equipment at all times.</p><p>Ensure Health &amp; Safety is adequately observed.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>SCMS &amp; Cybersecurity Commissioning Engineer- Muscat, Oman Siemens strongly believes in the value of a Digital Portfolio, hence Smart Infrastructure combines Digital Power Distribution and Digital Building Infrastructure technologies. Our Digital Portfolio will enable our customers to enjoy occupant’s intuitive buildings which are comfortable, safe, secure and energy efficient. Smart infrastructure from Siemens intelligently connects energy systems, buildings and industries to adapt and evolve the way we live and work. We work together with customers and partners to build an ecosystem that intuitively responds to the needs of people and helps customers to better use resources. It helps our customers to thrive, communities to progress and supports sustainable development. Join our Smart Infrastructure Customer Services Team as the SCMS and Cybersecurity Commissioning Engineer and help us re-imagine the world by finding solutions and making the world a smarter place for tomorrow. Key Responsibilities Your Role – International, Challenging and Future-Oriented! In this role you will be performing commissioning of SCMS and Cybersecurity Systems in the Middle East based in Oman. While being part of the team, you will also be involved in the latest solutions on IOT, Cyber Security, Process Bus, etc. General Responsibilities: Configure and test Bay Control Units (BCUs), RTUs/PLCs, SCMS systems Develop new application solutions with IEC61850, Modbus, Profibus, IEC 101, IEC 104 or other communication protocols relevant in the energy automation field Design, configure, conduct FAT and commissioning of Cybersecurity for Substation Automation systems Be one of our primary customer interfaces, including trouble shooting and commissioning support Occasionally assist in developing new order proposals (bills of materials, clarifying technical comments, etc.) Design, development, implementation, testing, and commissioning of protection and control applications and schemes Prepare (SAT) Site Acceptance Test procedures. Configure, test and perform commissioning SCMS for retrofit applications. Travel to job sites, customer offices and vendors factories expected to be around 75% of total time. Perform Training on the SCMS system to customers Your Qualifications and Skills – Digital and Solid! Expected degree qualification and/or major: Bachelor’s degree in electrical/Electronics/Instrumentation Relevant year of experience: 3+ Years Knowledge of expertise: Advanced knowledge of substation network topology design; Ring/Star with redundancy protocol RSTP, PRP &amp; HSR etc. Practical knowledge of large 61850 network design, Human-Machine Interface / SCADA Parameterization including implementation of Substation Automation and Cyber Security Experience in parameterizing communication protocols, IEC61850, IEC 101, IEC 104 etc Hands-on experience in Configuring and testing BCUs with logics Configuring HMIs with SLDs, Alarms, Events, Trends, etc Configuring Gateways to convert various protocols Configuring, integration and troubleshooting of numerical devices and meters to SCMS/RTU systems Be on site to lead/participate in FAT and/or SAT and/or commissioning as required by the project Knowledge of Cybersecurity in OT Systems including configuration/parameterization of Next Gen Firewall IDS Syslog Server RBAC Hardening Awareness of IEC 62443 and IEC 62351 standards Any relevant certification: Will be an added Advantage Experience in utility or power transmission/distribution environments. Personal skills: Adaptability, problem-solving, cross-cultural collaboration, Language skills: English Considered a Plus – Not mandatory: The following experience is not mandatory; however, candidates who can demonstrate solid knowledge in these areas will be given extra consideration: Knowledge of Siemens relay/automation products and associated software Communication Network Technologies, including Design, Configuration, and troubleshooting Knowledge of ANSI standards, IEC standards. SICAM PAS SICAM SCC/WinCC SICAM A8000 RTU, SICAM 230 SCADA, SICAM AK3, Toolbox II DIGSI 4/5 Logic Building with (CAEx, ST, CFC etc) Knowledge of the multiple vendors' Numerical Relays products and associated software C, VB Programming Language experience. What else do you need to know? What else do you need to know? As a world leader in developing and producing the most advanced engineering technologies, we improve lives and further human achievements worldwide, while also protecting the climate - all thanks to our employees. Working with us, you have the foundation to develop personally and professionally. We give you the chance to do something significant that benefits society and human progress. We give you the chance to create a difference. Diversity at Siemens is our source of creativity and innovation. Having different types of talent and experiences makes us more ambitious and better prepared to respond successfully to the demands of the Society. Therefore, we value the candidates that reflect the Diversity that we enjoy in our Company. Please find more information at www.siemens.com At Siemens we are always challenging ourselves to build a better future. We need the most innovative and diverse Digital Minds to develop tomorrow ‘s reality. Find out more about the Digital world of Siemens here: www.siemens.com/careers/digitalminds We are looking forward to receiving your online application. Please note: Only complete applications can be considered in the selection process.</span> </div>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<p>The Senior Power System Secondary Engineer acts as the technical authority on behalf of the project developer, providing independent oversight, review, and verification of all secondary systems engineering across utility-scale renewable energy plants (Solar PV, Wind) and Battery Energy Storage Systems (BESS). The role is pivotal in ensuring that designs delivered by EPC contractors and specialist consultants are technically sound, safe, cost-effective, and fully compliant with International Best Practices, utility / TSO requirements, and applicable International Standards (IEC, IEEE/ANSI). </p><br><p>Design Review & Verification</p><ul><li><p>Lead the review and verification of all secondary design deliverables — including Single Line</p></li></ul><p>Diagrams (SLDs), Protection & Metering Diagrams (PMDs), Block Logic Diagrams (BLDs), AC/DC</p><p>schematics, and LV System Design Documents — for HV substations and renewable plants.</p><ul><li><p>Verify protection and control philosophies, including relay settings, selectivity analyses, and</p></li></ul><p>coordination studies (short-circuit calculations, CT/VT sizing) prepared by consultants and EPC</p><p>contractors.</p><ul><li><p>Review and approve interlocking schemes, bay-level logic, and station-level automation across</p></li></ul><p>switchgear, transformers, feeders, and renewable energy plant interfaces.</p><p>Substation Automation & SCADA</p><ul><li><p>Approve substation automation and SCADA architectures, ensuring correct implementation of IED</p></li></ul><p>logic, signal lists, and interlocking schemes at bay and station levels.</p><ul><li><p>Oversee the integration and configuration of communication protocols — IEC 61850</p></li></ul><p>(GOOSE/SV/MMS), IEC 60870-5-104, and DNP3 — governing data flow between Plant Power</p><p>Controllers (PPC/EMS), substations, and utility control centers.</p><ul><li><p>Review IED configurations, substation HMI displays, and historian / data management architectures</p></li></ul><p>for completeness and compliance.</p><p>Telecommunications & Cybersecurity</p><ul><li><p>Review and validate communication and telecommunication architectures, including managed</p></li></ul><p>network design (VLANs, PRP/HSR redundancy), cybersecurity policies (IEC 62351 / NERC-CIP</p><p>aligned), and tele-protection performance requirements.</p><p>Standards, Compliance & Grid Code Adherence</p><ul><li><p>Ensure strict adherence to international standards and grid codes (IEC, IEEE/ANSI) by performing</p></li></ul><p>technical audits and vetting technical submissions to Transmission / Distribution System Operators</p><p>(TSO/DSO).</p><ul><li><p>Manage technical interfaces and coordinate between EPC contractors, engineering consultants,</p></li></ul><p>OEMs, and the grid operator to ensure a coherent and optimized secondary systems design.</p><p>Testing, Commissioning & Project Governance</p><ul><li><p>Provide technical governance during critical project phases, including witnessing Factory</p></li></ul><p>Acceptance Tests (FAT) and Site Acceptance Tests (SAT), and reviewing commissioning</p><p>procedures for all secondary systems.</p><ul><li><p>Review and approve test plans, testing protocols, punch lists, and commissioning records to ensure</p></li></ul><p>safe energization of HV substations and plant systems.</p><ul><li><p>Act as the Owner’s Engineer representative in te</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education</p><ul><li><p>Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or a closely related field.</p></li><li><p>Professional Engineering registration (PE / CEng or equivalent) is an advantage.</p></li></ul><p>Experience</p><ul><li><p>8+ years of engineering experience with a demonstrable focus on substation secondary systems</p></li></ul><p>design and delivery.</p><ul><li><p>Significant experience in a developer, owner’s engineer, or utility role with direct responsibility for</p></li></ul><p>managing and challenging EPC contractor deliverables.</p><ul><li><p>Proven track record on grid-connected utility-scale renewable energy projects (Solar PV, Wind)</p></li></ul><p>and/or Battery Energy Storage Systems (BESS).</p><ul><li><p>Experience working across the full project lifecycle from FEED and detailed design through to FAT,</p></li></ul><p>SAT, and commercial operation</p>

<p><strong>Position Summary</strong></p><p>The Site Engineer will be responsible for the day-to-day execution, management, and supervision of potable water pipeline construction activities.&nbsp;</p><p>The successful candidate must demonstrate the ability to operate independently on-site, managing field resources, tracking daily progress, and overcoming construction challenges with minimal supervision.&nbsp;</p><p>This role requires seamless communication and reporting to the Project Manager to ensure project deliverables are achieved safely, on schedule, within scope, and in strict compliance with engineering specifications.</p><p><strong>Key Responsibilities</strong></p><p>Site Management &amp; Execution</p><ul><li>Supervise and drive the daily construction activities of potable water pipeline installations, including excavation, pipe laying, jointing, thrust block construction, backfilling, and compaction.</li><li>Manage onsite sub-contractors, laborers, plant machinery, and material resources individually to ensure efficient field workflows.</li><li>Conduct field inspections to verify that all work aligns with approved engineering drawings, method statements, and structural parameters.</li><li>Direct pressure testing, hydrotesting, flushing, and disinfection protocols for newly laid potable water pipelines before commissioning.</li></ul><p>Reporting &amp; Project Coordination</p><ul><li>Coordinate closely with the Project Manager to track project timelines, resource allocations, and budget milestones.</li><li>Generate and submit precise daily, weekly, and monthly site progress reports, documenting work completed, delays, equipment utilization, and labor hours.</li><li>Act as the primary onsite point of contact, resolving field issues independently while escalating complex variations or delays to the Project Manager immediately.</li><li>Liaise with client representatives, consultants, and local authorities during routine site inspections and quality sign-offs.</li></ul><p>Quality Assurance &amp; Safety Compliance</p><ul><li>Maintain strict quality control metrics over all incoming pipeline materials, ensuring proper handling and storage of pipes, valves, and fittings.</li><li>Implement and enforce all company Health, Safety, and Environment (HSE) policies onsite, targeting zero incidents.</li><li>Ensure accurate site surveying, alignment verification, and the preservation of levels as dictated by the design specifications.</li></ul><p><strong>Requirements &amp; Qualifications</strong></p><p>Experience &amp; Education</p><ul><li><strong>Minimum Experience:</strong> 5+ years of verified site engineering experience dedicated to pipeline infrastructure works, specifically focused on potable water transmission and distribution networks.</li><li><strong>Education:</strong> Bachelor’s Degree or Diploma in Civil Engineering, Mechanical Engineering, or a closely related construction discipline.</li><li><strong>Technical Knowledge:</strong> Deep familiarity with water pipeline materials (such as DI, HDPE, PVC, and Carbon Steel), jointing techniques, valve chambers, testing mechanisms, and standard utility standards.</li></ul><p>Key Competencies</p><ul><li><strong>Autonomy:</strong> Proven ability to manage a construction site individually, handle rapid decision-making under pressure, and drive productivity independently.</li><li><strong>Software Proficiency:</strong> Basic proficiency in AutoCAD for checking layout designs and MS Office (Excel, Word) for administrative reporting.</li><li><strong>Communication:</strong> Strong interpersonal and report-writing skills to build working relationships across sub-contractors and project executives.</li></ul><p>Preferred Assets (Added Advantage)</p><ul><li><strong>Driving License:</strong> Possession of a valid, active driving license is highly preferred and considered a significant advantage for field mobility across site segments.</li></ul>

<p>MEP ENGINEER Qualification -BE Electrical Experience - T otal 10 years with minimum 5 year GCC experience as an MEP Engineer GCC driving license -Preferred Leave &amp; Other entitlements -As per Omani Labour Law Age - Below 45 years Salary &amp; Benefits -Salary will be discussed and finalized based on Qualification, experience, skills and Interview assessment by client. In addition of salary company will provide free accommodation , Transportation, Medical GENERAL INFORMATION REQUIRED Please send all documents in following sequence of attachment. Kindly accord priority. Document Required to be sent with CV:- Updated CV Academic Certificate of Graduation and above Achievements/Awards during career growth/Licence (if any)/Permit copy/Any other approvals copy as required for job. Experience certificates Passport copy clear (Please attach your Passport last Visa cancelled page if you were present earlier with any employer of current hiring country) Recent Photograph Mobile number Your current Location If already in Gulf, how soon you can join Current Salary &amp; Salary Expectation In case you need any clarification pls send message on WhatsApp PHONE_NUMBER .</p><p><strong>Desired Candidate Profile</strong></p><p>BE Electrical</p> <p>Total 10 years with minimum 5 year GCC experience as an MEP Engineer</p> <p>GCC driving license -Preferred</p> <p>Age - Below 45 years</p>

<p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 11,000 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world. For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><p>The Testing &amp; Commissioning Engineer will be responsible for planning, managing, coordinating, and performing all activities related to the testing and commissioning of systems and equipment for large-scale PMC (Project Management Consultancy) infrastructure projects, particularly in the railway sector. The candidate will ensure that all systems function safely and according to project requirements prior to handover.</p><p><strong>Missions/Main Duties</strong></p><ul><li>Develop, review, and update testing and commissioning plans, procedures, and schedules to match project timelines.</li><li>Collaborate with design, construction, and systems teams to identify commissioning requirements and interfaces.</li><li>Lead and execute on-site testing and commissioning for various systems (electrical, mechanical, signaling, telecom, etc.).</li><li>Ensure all installations and systems meet contract specifications, safety standards, and regulatory codes.</li><li>Lead technical workshops, readiness reviews, and T&amp;C governance meetings to ensure alignment across all stakeholders.</li><li>Manage the Design and Build contractor s Factory Acceptance Testing, System Integration Testing, and Site Acceptance Testing for complex railway systems, ensuring full technical compliance, seamless system integration, and a smooth handover to operations.</li><li>Supervise and validate the testing and commissioning performed by vendors and contractors.</li><li>Coordinate with all project stakeholders to resolve issues and ensure smooth project handover.</li><li>Conduct meetings to track progress, address challenges, and review commissioning documentation.</li><li>Review and approve inspection test plans, method statements, and testing procedures.</li><li>Oversee final system integration, performance testing, and acceptance activities.</li><li>Prepare and submit final commissioning documents and as-built records.</li><li>Support training and transition for the client s operations team.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electrical Engineering, Mechanical Engineering, or a related field.</li><li>Minimum 10 years of relevant experience in Testing &amp; Commissioning roles, preferably within railway or large infrastructure PMC projects.</li><li>Proven experience leading testing and commissioning for multi-disciplinary systems.</li><li>Sound knowledge of applicable international standards and safety regulations</li><li>Strong understanding of project management methodologies and PMC practices.</li></ul>