Navigation Officer Jobs in Oman

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> The avionics technician (F-16 Block 50+) fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of instrumentation including: area surveillance, telemetry, radar, or global positioning system (GPS) metric track (MT). Conducts special technical studies and reports regarding instrumentation configuration, acceptance, and/or performance.</p> <p><strong>Job description:</strong></p> <ul> <li>Perform or supervise functions involving installation, repair, testing, and modification on NAV attack, flight controls radar, SMS, Comm/Nav and ECM systems.</li> <li>Operate avionics systems by using aircraft controls to determine operational condition.</li> <li>Interpret equipment operating characteristics to isolate malfunctions in systems such as attack control, radar infrared, laser, instruments, displays, flight control, communication, navigation, satellite communications, identification, defensive and offensive ECM systems.</li> <li>Use technical data wiring diagrams, electronic measurement equipment, AGE/GSE, and special tools.</li> <li>Remove and install components.</li> <li>Perform and supervise alignment calibration and bore sight of avionics systems.</li> <li>Upload operational software into system components.</li> <li>Inspect, analyze, and evaluate avionics systems.</li> <li>Interpret inspection findings and determine adequacy of corrective actions.</li> <li>Review maintenance management publications and procedures.</li> <li>Recommend methods to improve equipment performance and maintenance procedures.</li> <li>Perform on-the-job training and instruction; supervise and accept work performed by RAFO technicians.</li> </ul> <p><strong>Minimum requirements:</strong></p> <ul> <li>5 years F-16 Block 50+ or 8 years supporting F-16 aircraft.</li> <li>AFSC 2A3X4, 2A354, or 2A374 F-16 Block 50 integrated avionics or equivalent.</li> <li>Performed and/or supervised functions involving installation, repair, testing, and modification on F-16 Block 50 and up avionics systems.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma.</li> </ul> <p><strong>Clearance requirements:</strong><br> Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <p><strong>Physical/preferred qualifications:</strong></p> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Exposure to disagreeable fumes and to cuts and bruises from using tools in close places and hazards of moving vehicles such as forklifts in the shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul></p><p></p>

<p><h4>Location</h4> <p>Muscat, Oman</p> <h4>Start date</h4> <p>2026</p> <h4>Service status</h4> <p>Resident (5 days per week)</p> <h4>Estimated service duration</h4> <p>12 months (renewable)</p> <h4>Qualification and experience required</h4> <ul> <li>Extensive experience in LNG shipping operations, terminal management, vessel berthing, cargo handling, and compliance with maritime safety and environmental regulations.</li> <li>Knowledge of OCIMF SIRE/CDI vetting and SIGTTO best practices.</li> <li>Understanding of ISPS Code implementation and port security protocols.</li> <li>Experience in similar position: over 10 years, including 5 years as chief officer or master on LNG/LPG carriers or crude/clean oil carriers.</li> <li>Good knowledge in warehouse and lifting activities.</li> </ul> <h4>Service purpose</h4> <p>We are seeking a skilled and experienced marine specialist to join our dynamic team for the LNG bunkering project.</p> <p>In this key role, in close collaboration with the LNG team in Sohar, you will be a strategic member of the Muscat back office in charge of preparing and overseeing the safety, compliance, and efficiency of all marine operations.</p> <p>Your area of responsibilities will apply to LNG carriers loading, LNG bunkering operations, and, to a larger extent, all marine-related matters of the LNG bunkering project.</p> <p>Your skills and experience will also identify you as a potential temporary replacement of the marine superintendent in Sohar.</p> <p>Additionally, you would potentially be able to provide support to the Sohar team regarding logistics entities and warehouse activities, as this will be part of the Sohar marine superintendent's scope.</p> <p>The job holder is part of the company Muscat back office team and will report directly to the supply chain and marine manager.</p> <p>If interested, kindly apply.</p></p><p></p>

<p><h4>Location</h4> <p>Muscat, Oman</p> <h4>Start date</h4> <p>2026</p> <h4>Service status</h4> <p>Resident (5 days per week)</p> <h4>Estimated service duration</h4> <p>12 months (renewable)</p> <h4>Qualification and experience required</h4> <ul> <li>Extensive experience in LNG shipping operations, terminal management, vessel berthing, cargo handling, and compliance with maritime safety and environmental regulations.</li> <li>Knowledge of OCIMF SIRE/CDI vetting and SIGTTO best practices.</li> <li>Understanding of ISPS Code implementation and port security protocols.</li> <li>Experience in similar position: over 10 years, including 5 years as chief officer or master on LNG/LPG carriers or crude/clean oil carriers.</li> <li>Good knowledge in warehouse and lifting activities.</li> </ul> <h4>Service purpose</h4> <p>We are seeking a skilled and experienced marine specialist to join our dynamic team for the LNG bunkering project.</p> <p>In this key role, in close collaboration with the LNG team in Sohar, you will be a strategic member of the Muscat back office in charge of preparing and overseeing the safety, compliance, and efficiency of all marine operations.</p> <p>Your area of responsibilities will apply to LNG carriers loading, LNG bunkering operations, and, to a larger extent, all marine-related matters of the LNG bunkering project.</p> <p>Your skills and experience will also identify you as a potential temporary replacement of the marine superintendent in Sohar.</p> <p>Additionally, you would potentially be able to provide support to the Sohar team regarding logistics entities and warehouse activities, as this will be part of the Sohar marine superintendent's scope.</p> <p>The job holder is part of the company Muscat back office team and will report directly to the supply chain and marine manager.</p> <p>If interested, kindly apply.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Ingénieur-e Qualité Développement F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Intégré-e à la Direction Qualité de la Direction Technique, vous aurez en charge le développement de produits au sein de la Direction de Projets Produits Navigation. <br>Dans ce cadre, vos principales missions sont de garantir la validation de la définition, la qualité et la conformité des produits livrés conformément aux attentes du Client interne et externe.<br>Vous serez ainsi en charge des missions suivantes :<br>- Aider le Chef de Projet à la préparation et à la réalisation des principaux jalons projet ainsi qu'à la mise à jour des différents reportings internes et/ou clients ;<br>- Participer à l'élaboration des logiques de développement, jalons et des livrables conformément aux référentiels internes et clients ;<br>- Participer aux Revues de Conception techniques, contrôler l'application des règles Métiers et être force de proposition d'amélioration ;<br>- Aider à la gestion des risques projet et à l'analyse des éventuelles non-conformités ;<br>- Rédiger les documents qualité du projet ;<br>- Accompagner le projet sur l'identification, la déclinaison, la couverture et la justification des exigences ;<br>- Assurer le suivi et la validation de la gestion de configuration des produits conformément aux référentiels interne et client et aux exigences règlementaires ;<br>- Conduire l'analyse et la résolution des incidents en concertation avec les acteurs concernés, puis veiller à la mise en place des actions correctives et préventives pertinentes jusqu'à la vérification de l'efficacité et contribuer au retour d'expérience ;<br>- Promouvoir la démarche qualité, l'APQP et les dispositions du SMQ auprès de l'ensemble des acteurs des projets concernés et tendre vers le zéro défaut. </p><br><br><p>Déplacements occasionnels en France et en Europe (centres industriels, client, fournisseurs,...) </p><br><br><p>- Connaissance de la gestion de projet, du cycle de développement en V, de l'ingénierie système, de la gestion de configuration<br>- Connaissance des normes ISO 9001, EN9100, EN9145, AQAP 2110 <br>- Connaissances des standards aéronautiques (PART21, PART145,...)<br>- Compétences souhaitées en système, mécanique, électronique<br>- Compétences en analyse causale, résolution de problèmes, analyse fonctionnelle AMDEC, analyse de risque <br>- Autonomie, capacité à convaincre, pédagogie, rigueur <br>- Très bon relationnel et communication facile <br>- Capacité d'analyse, de diagnostic et de synthèse<br>Une expérience réussie en gestion de projet ou en assurance qualité développement est un plus. </p><br><br><br> </div>

<p>Dear Doctor, Greetings from Good Fellow Foreign Services!! This is to inform you that MINISTRY OF HEALTH, OMAN is recruiting candidates for SULTAN QABOOS HOSPITAL ( SALALAH) for the positions of Medical Officer ,Consultant &amp; Specialist Doctors.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Medical Officer</li><li>Consultant &amp; Specialist Doctors</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Legal Advisor will be responsible for providing impartial, independent legal opinion and advice to the</p> <p>Management, Chief Executive Officer and Board of Directors of ASYAD Shipping Company and subsidiaries (ASC). The</p> <p>General Counsel has the responsibility to:</p> <p> provide quality, pragmatic, timely and cost-effective legal services to ASC and its subsidiaries;</p> <p> identify, develop, communicate, and monitor policies which will ensure compliance with applicable law by,</p> <p>and minimize impacts of identified legal risks to, ASC, its shareholders and subsidiaries;</p> <p> be part of the decision-making process in areas of significant, company-wide impact; and</p> <p> be part of the formulation of company strategies, the evaluation of new ventures and major investment proposals</p> <p>or divestments.</p> <p> be part of a team of professionals working for a publicly listed company with diversified fleet.</p> <p>Please note that ASYAD Group has implemented an operating model where the Legal Unit is centralised. To the extent</p> <p>required, the General Counsel is expected to inform and seek the advice of the Group Chief Legal Officer of ASYAD</p> <p>Group on significant legal matters impacting ASC business, or ASYAD Group, and on matters that impact the legal</p> <p>function of the group.</p> <p> </p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>RESPONSABLE DE LOT QUALIFICATION ENVIRONNEMENTALE H/F</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Au sein du Centre d'Ingénierie Systèmes de Navigation, vous rejoignez l'équipes en charge des essais en environnement des centrales inertielles.<br>Le Responsable de lot exerce les activités suivantes :<br>· Il est responsable de la tenue des performances Qualité / Coût / Délais sur le périmètre de ses lots de travaux en cohérence avec les engagements de ses fiches de lots (devis, jalons, périmètre des travaux).<br>· Il pilote les travaux de ses lots conformément aux exigences du processus de pilotage de la société. En particulier, il structure ses travaux en conformité avec le<br>WBS établi par le Pilote de Projet. Il anime les revues quotidiennes de performances.<br>Il participe aux réunions de pilotage projet et assure aux responsables projet et métier le reporting hebdomadaire en termes d'avancement et de tenue des objectifs.<br>· Il anime l'équipe de développement de ses lots de travaux et met à sa disposition les moyens de réaliser leurs tâches.<br>· Il est responsable de l'exécution des prestations externalisées réalisées dans son périmètre (contractualisation, animation et acceptation).<br>· Il est responsable de l'établissement du référentiel de ses lots de travaux (référentiel documentaire, enregistrements de validation, relevé de configuration, …)<br>· Il est garant des réalisations techniques de ses lots par délégation de son responsable métier.<br>· Il identifie les risques et opportunités sur son périmètre et pilote les actions associées.</p><br><br><p>A ce titre, vous aurez pour missions de :<br>· Participer au Set-Up de Test en Environnement<br>· Rédiger des plans de qualification<br>· Rédiger des procédures<br>· Rédiger et de suivre le fichier main courante liée à chaque essai<br>Réaliser des essais<br>· Rédiger des Comptes Rendus<br>· Réserver des laboratoires et d'établir des devis<br>· Assurer la bonne application des règles du métier qualification<br>· Contribuer à expertiser et résoudre les faits techniques et capitaliser les leçons apprises<br>· Faire progresser les savoir et savoir –faire au sein du pôle qualification<br>· Supporter le responsable du pôle qualification lors des revues des appels d'offres en participant à la définition de la stratégie des tests<br>· Etre en Interface avec différents interlocuteurs (Resp. de projet, Ingé syst, Ingénieur en Chef etc…)<br>Des déplacements ponctuels en France sur nos deux sites de fabrication sont à prévoir.<br>Savoir Faire <br>· Bonne connaissance des équipements embarqués aéronautique.<br>· Bonne connaissance hardware des bancs de test (appareils de mesure, connectivité RS, Ethernet , Protocole TCP/IP, ProtocoleIEEE , Teststand, Veristand ....)<br>· Expérience sur le cycle en V d'un produit aéronautique,<br>· Connaissance du logiciel MATLAB<br>· Anglais : Lu, parlé et écrit nécessaire<br>· Connaissance des normes DO160 et MILSTD<br>·Connaissance en essais CEM, mécaniques et climatiques<br>Savoir Etre<br>- Bon relationnel pour assurer une mission d'interface entre les différents membres du pôle qualif</p><br><br><p>BAC+5 <br>5 à 10 ans d'expérience </p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>RESPONSABLE DE LOT QUALIFCATION ENVIRONNEMENTALE H/F</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Au sein du Centre d'Ingénierie Systèmes de Navigation, vous rejoignez l'équipes en charge des essais en environnement des centrales inertielles.<br>Le Responsable de lot exerce les activités suivantes :<br>· Il est responsable de la tenue des performances Qualité / Coût / Délais sur le périmètre de ses lots de travaux en cohérence avec les engagements de ses fiches de lots (devis, jalons, périmètre des travaux).<br>· Il pilote les travaux de ses lots conformément aux exigences du processus de pilotage de la société. En particulier, il structure ses travaux en conformité avec le<br>WBS établi par le Pilote de Projet. Il anime les revues quotidiennes de performances.<br>Il participe aux réunions de pilotage projet et assure aux responsables projet et métier le reporting hebdomadaire en termes d'avancement et de tenue des objectifs.<br>· Il anime l'équipe de développement de ses lots de travaux et met à sa disposition les moyens de réaliser leurs tâches.<br>· Il est responsable de l'exécution des prestations externalisées réalisées dans son périmètre (contractualisation, animation et acceptation).<br>· Il est responsable de l'établissement du référentiel de ses lots de travaux (référentiel documentaire, enregistrements de validation, relevé de configuration, …)<br>· Il est garant des réalisations techniques de ses lots par délégation de son responsable métier.<br>· Il identifie les risques et opportunités sur son périmètre et pilote les actions associées.</p><br><br><p>A ce titre, vous aurez pour missions de :<br>· Participer au Set-Up de Test en Environnement<br>· Rédiger des plans de qualification<br>· Rédiger des procédures<br>· Rédiger et de suivre le fichier main courante liée à chaque essai<br>Réaliser des essais<br>· Rédiger des Comptes Rendus<br>· Réserver des laboratoires et d'établir des devis<br>· Assurer la bonne application des règles du métier qualification<br>· Contribuer à expertiser et résoudre les faits techniques et capitaliser les leçons apprises<br>· Faire progresser les savoir et savoir –faire au sein du pôle qualification<br>· Supporter le responsable du pôle qualification lors des revues des appels d'offres en participant à la définition de la stratégie des tests<br>· Etre en Interface avec différents interlocuteurs (Resp. de projet, Ingé syst, Ingénieur en Chef etc…)<br>Des déplacements ponctuels en France sur nos deux sites de fabrication sont à prévoir.<br>Savoir Faire <br>· Bonne connaissance des équipements embarqués aéronautique.<br>· Bonne connaissance hardware des bancs de test (appareils de mesure, connectivité RS, Ethernet , Protocole TCP/IP, ProtocoleIEEE , Teststand, Veristand ....)<br>· Expérience sur le cycle en V d'un produit aéronautique,<br>· Connaissance du logiciel MATLAB<br>· Anglais : Lu, parlé et écrit nécessaire<br>· Connaissance des normes DO160 et MILSTD<br>·Connaissance en essais CEM, mécaniques et climatiques<br>Savoir Etre<br>- Bon relationnel pour assurer une mission d'interface entre les différents membres du pôle qualif</p><br><br><p>BAC+5 <br>5 à 10 ans d'expérience </p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong><u>Job Purpose:</u></strong> The General Counsel will be responsible for providing impartial, independent legal opinion and advice to the Management, Chief Executive Officer and Board of Directors of ASYAD Shipping Company and subsidiaries (ASC). The General Counsel has the responsibility to: provide quality, pragmatic, timely and cost-effective legal services to ASC and its subsidiaries; identify, develop, communicate, and monitor policies which will ensure compliance with applicable law by, and minimize impacts of identified legal risks to, ASC, its shareholders and subsidiaries; be part of the decision-making process in areas of significant, company-wide impact; and be part of the formulation of company strategies, the evaluation of new ventures and major investment proposals or divestments. be part of a team of professionals working for a publicly listed company with diversified fleet. Please note that ASYAD Group has implemented an operating model where the Legal Unit is centralised. To the extent required, the General Counsel is expected to inform and seek the advice of the Group Chief Legal Officer of ASYAD Group on significant legal matters impacting ASC business, or ASYAD Group, and on matters that impact the legal function of the group.</p><p><strong><u>Key Accountabilities Description</u></strong></p><ul><li>Draft, review, and advise in relation to: Charter parties and other commercial contract. Marine insurance and claims; Ship management (technical) contracts; Marine regulatory environment, compliance and international sanctions; Class and flag requirements and practice; Ship financing; Crew employment contracts and matters generally; Protection and Indemnity (P&amp;I) and Freight, Demurrage and Defence (FD&amp;D) matters, where appropriate subject, to P &amp; I club agreement; Ship building and repair contracts; and Other commercial contracts relevant to ASC and its subsidiaries.</li><li>Ensure quality and timely review and advise in compliance with applicable laws, regulations, and policies.</li><li>Ensure ASC interests are properly protected.</li><li>Evaluation of legal risks and advising mitigation steps.</li><li>Proper Liaison with relevant department to ensure the best outcome.</li><li>Generally, advise ASC on all matters requiring legal input such as but not limited to, corporate governance, corporate, property, leases, employment, finance and banking, procurement, chartering, shipbuilding, ship acquisition and selling, etc.</li><li>Ensure compliance of ASC, its subsidiaries, and business with applicable laws and regulations.</li><li>Resolve any audit findings, or non-compliances identified from a legal perspective.</li><li>To provide the insurance team with expert knowledge in contracts as well as claim issues.</li><li>Liaise with other departments and business units in law-related areas of significant company-wide impact (e.g. flagging, class, insurance, HSSE, ship building and repair contracts, and maritime transportation).</li><li>Monitor performance of legal department staff advising on maritime, and shipping matters, and supervise their execution of work.</li><li>Ensure career development for legal department staff, in particular Omanis on shipping and maritime areas of law and industry knowledge.</li><li>Set performance KPIs to ensure development of the staff and liaise with Legal Unit of Asyad Group to ensure alignment of performance.</li><li>Ensure utilisation of existing registers to monitor performance of the works, and time taken to deliver the work.</li><li>Conduct internal training programs, and on the job-training for areas of development.</li><li>Propose training programs for the legal department staff.</li><li>Propose and implement improvements to the management of the legal department, and interface with the Legal Unit of Asyad Group.</li><li>Maintain excellent client relationships with senior managers and stakeholders to ensure timely delivery of pragmatic and quality legal services.</li><li>Obtain continuous feedback from stakeholders, and ensure any significant issues faced are addressed and resolved.</li><li>Identify major legal risks facing the ASC Group and propose management and mitigation options.</li><li>Set the legal budget for internal &amp; external legal spend with the Group Chief Legal Officer, CEO and Board; be accountable for the legal budget of ASC and for providing management information as appropriate.</li><li>Cost optimization of legal budget.</li><li>Act as the primary relationship manager with all external counsel to ensure clear instructions and cost-effective, relevant work product; ensure external legal spend is efficient and appropriate .</li><li>Ensure compliance with procurement and tendering policy, legal affairs policy on engagement of external counsel, and any other policy.</li><li>Lead the identification of opportunities for continuous improvement and sustainability of systems, processes and practices considering global standards, productivity improvement and cost reduction.</li><li>Identify programs, and systems that will contribute to the improvement of ASC s systems, processes, and practices.</li></ul><p><strong><u>Communication:</u></strong></p><ul><li><strong>Internal:</strong> Board of Directors, Chief Executive Officer, Executive Management, Group Chief Legal Officer of Asyad Group, Employees of the Legal Unit, All levels of staff. Asyad Group, and its business units</li><li><strong>External:</strong> External legal/business community, Finance/audit consultants, Government and regulatory agencies, Major suppliers, Contractors, Customers, Business partners</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong><u>Qualifications:</u></strong></p><ul><li>Minimum Qualification: Bachelor s in law or equivalent from a reputable university or law school with admission to a recognised civil or common law bar. Preferably qualified in English Law.</li><li>Minimum Experience: Minimum of 10 years experience in shipping and maritime areas of law, as relevant to ASC s business. An individual must have significant experience liaising with and advising directors, senior management and clients on complex legal matters.</li></ul><p><strong><u>Job Specific Skills:</u></strong></p><ul><li>Excellent communication skills (oral, written, presentation). Have clear, accurate and persuasive communication skills.</li><li>Strong analytical skills (focus on strategic and conceptual thinking).</li><li>Strong leadership and managerial skills.</li><li>Good people development skills (management, coaching and mentoring).</li><li>General computer literacy (Microsoft Office e.g. Word, Excel, PowerPoint, etc.) mandatory.</li><li>Have a strong orientation towards the provision of quality services and products, combined with a focus on creating value.</li><li>Possess drive and determination.</li><li>Possess self-discipline , diplomacy and tact.</li><li>Have strategic and commercial acumen to be able to contribute to the business beyond the confines of their pure legal training.</li><li>Be hands-on, possess a strong work ethic and have the ability to take a helicopter view of the business whilst prioritising many projects.</li><li>Be a relationship builder who enjoys working with others and who has a history of instilling confidence amongst multiple parties (management, colleagues, subordinates, government bodies, external general counsel etc).</li><li>Possess strong attention to detail whilst working concurrently on multiple projects under time pressure.</li><li>Act as an advocate of ASC and its values with all internal and external stakeholders.</li><li>Commercial mindset.</li></ul><p><strong><u>Competencies:</u></strong></p><ul><li>Legal Advice and Problem Solving</li><li>Legal Expertise</li><li>Regulatory Requirement</li><li>Shipping, Maritime and Logistics Sector Knowledge</li><li>Commercial Mindset</li><li>Stakeholder Management</li></ul><p></p></section>

<p>Bioeconomy Officer, Oman ARISE Program Please note that the deadline is based on Korean Standard Time Zone (KST, UTC+9) INTRODUCTION TO GGGI The Global Green Growth Institute (GGGI) is a treaty-based international, inter-governmental organization dedicated to supporting and promoting strong, inclusive and sustainable economic growth in developing countries and emerging economies. To learn more please visit about GGGI web page. In the Sultanate of Oman, GGGI has partnered with the Government through the leadership of the Environment Authority (EA) to develop the "Accelerating Resilience and Innovation for Sustainable Ecosystems management" (ARISE) Program. The ARISE Program is a USD 100 million initiative spanning six years, designed to deliver climate action, ecosystem restoration, and economic growth through Nature-based Solutions (NbS) integrated into the Bioeconomy and Sustainable Special Economic Zones (SSEZs) in the Dhofar Mountains and the wider Salalah area. The program ultimately targets the restoration of 30,000 hectares of land, an estimated 750,000 tCO2e/year in greenhouse gas emission reductions, and the creation of over 1,000 green jobs. The implementation of the ARISE Program is structured around two phases. Phase 1 will cover 2 years, and Phase 2 will be over 4 years. The funding has been approved for Phase 1. POSITION SUMMARY The Bioeconomy Officer provides technical and analytical support to the ARISE Program's bioeconomy workstream. The Officer supports the development and implementation of the bioeconomy strategy and roadmap, including assessing bioeconomy potential in Salalah and identifying priority value chains. The officer collaborates with technical experts, government counterparts, and private sector stakeholders to design bankable business models and investment cases. Additionally, the role coordinates bioeconomy integration across broader program activities, such as Sustainable Special Economic Zones (SSEZs) and landscape restoration. The officer assists in designing pilot activities, supports engagement with financial partners, and contributes to budget monitoring and reporting, ensuring alignment with program objectives and donor requirements. PURPOSE • Facilitate the effective execution of the bioeconomy workstream, engaging key stakeholders including government, local communities, public and private investors, and SMEs. • Develop sustainable bioeconomy objectives and translate them into practical, high impact, and bankable business and investment models. • Contribute to workstream coordination by providing technical and analytical support, monitoring budgets and preparing high-quality reports that ensure adherence to compliance and results-based performance frameworks • Drive innovation and opportunity identification in bioeconomy related investment pipelines to expand program impact and sustainability. • Support a program-wide approach by ensuring integration of bioeconomy across other workstreams. ENGAGEMENT • Coordinate stakeholder engagement with government agencies, private-sector actors, financial institutions, and development partners to ensure coordinated delivery and alignment with national priorities. • Foster coherent collaboration across program staff and stakeholders to ensure complementarity, transparency, and efficient joint implementation. • Promote a team culture aligned with GGGI s values of Trust, Transparency, Respect, and Partnership. • Report directly to the Chief of Party- ARISE Program Lead on bioeconomy-related activities and coordination with other workstreams. • Represent the program in meetings, workshops, and calls as delegated, ensuring effective follow-up and timely documentation. DELIVERY • Contribute to the drafting and finalization of the bioeconomy strategy and roadmap, assisting in the tracking of project milestones, budget utilization, and timely delivery of key outputs. • Contribute technical expertise to the development of bioeconomy business models in collaboration with investment experts. • Coordinate the implementation of bioeconomy pilot activities in support of value chain development, ensuring operational activities align with program timelines and quality standards Identify, monitor, and manage workstream risks, irregularities, and implementation challenges, and implement timely mitigation measures. • Ensure the successful completion of deliverables outlined in the program s detailed implementation plan. • Contribute to effective team management, ensuring GGGI s core values are integrated into daily operations and that staff wellbeing is promoted. • Mainstream environmental and social safeguards, poverty reduction, gender equality, and social inclusion across all outputs and outcomes. • Ensure compliance with national legal frameworks and alignment with national strategies, Agenda 2030, and NDC frameworks. WORKING CONDITIONS The Bioeconomy officer is an G8NAT grade level in GGGI's national salary scale, details of which can be found in the GGGI Staff Rules on GGGI s website. In addition, GGGI provides 27 days of annual leave, flexible work arrangements and contribution towards private health insurance that covers dental and vision.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Advanced degree in Forestry, Environmental Management, Climate Change, Economics, Finance, Development Studies, Natural Resource Management, or a related discipline (additional relevant experience may be considered in lieu of a postgraduate degree).</li><li>At least 6 years of relevant work experience, with experience in bioeconomy, restoration, value chain development, climate finance, or nature-based solutions.</li><li>Proven track record project management, including budget oversight and the delivery of high-quality narrative reporting.</li><li>Demonstrated experience working effectively with government counterparts, donors, financial institutions, and private sector actors.</li><li>Familiarity with Dhofar's economic, land use, restoration, and climate policy landscape is an advantage.</li><li>PMP, PRINCE2, or equivalent project management certification is an asset.</li><li>Fluency in English (written and spoken) is required. Knowledge of Arabic is an asset.</li><li>Strong ability to interpret, outline and implement guidelines, policies, and procedures effectively.</li><li>Excellent interpersonal skills to manage diverse stakeholder needs and foster collaboration.</li><li>Strategic thinker with capacity for joint problem-solving and decision-making.</li><li>Highly organized, detail-oriented, and able to prioritize under time constraints.</li><li>Demonstrates creativity, innovation, flexibility, and entrepreneurial mindset in achieving outputs.</li><li>Comfortable working independently and within a team environment.</li><li>Excellent interpersonal and facilitation skills, capable of translating complex concepts around bioeconomy to a wider audience.</li><li>Proven experience in mainstreaming safeguards, gender, poverty reduction, and social inclusion in project delivery.</li><li>Understand and actively support GGGI's mission, vision and values.</li><li>Promote an organizational culture of trust, transparency, respect and partnership.</li><li>Excel at problem solving, ask questions and seek support when needed, easily share information and knowledge with others both internally as externally.</li><li>Manage emotions and stress positively, build rapport and resolves conflict easily.</li><li>Strong ability to work independently and/or remotely, while maintaining productivity.</li><li>Be able to lead and manage a program workstream independently, while knowing when to seek advice and liaise closely with the relevant GGGI structures.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Positions / Specialities Required:</strong></p><br><ul><li><p>Anesthesia</p></li><li><p>Critical Care</p></li><li><p>Cardiology</p></li><li><p>Internal Medicine</p></li><li><p>ENT</p></li><li><p>Obstetrics &amp; Gynecology (OB-GYN)</p></li><li><p>General Surgery</p></li><li><p>Emergency Medicine</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Consultant (age below 50) — any one of:</strong></p><ul><li><p>MBBS + Internship + MCh + 6 years' experience</p></li><li><p>MBBS + Internship + DM (or equivalent) + 7 years' experience</p></li><li><p>MBBS + Internship + MD/MS (or equivalent) + 12 years' experience in the specialty after the Master's</p><br></li></ul><p><strong>Senior Specialist (age below 50) — any one of:</strong></p><ul><li><p>MBBS + Internship + DM/MCh (or equivalent) + 2 years' experience</p></li><li><p>MBBS + Internship + MD/MS (or equivalent) + 9 years' experience in the specialty after the Master's</p><br></li></ul><p><strong>Specialist (age below 45):</strong></p><ul><li><p>MBBS + Internship + MD/MS (or equivalent) + 3 years' experience after the Master's</p><br></li></ul><p><strong>Medical Officer (age below 45):</strong></p><ul><li><p>MBBS (or equivalent) + 5 years' experience, with the last 3 years full-time in the specialty</p></li></ul><p>Please Note : Practice in an unregistered private clinic is not accepted</p><br><p><strong>Salary Structure</strong></p><ul><li><p>Consultant - OMR 4245</p></li><li><p>Sr. Specialist - OMR 3325</p></li><li><p>Specialist - OMR 2145</p></li><li><p>Medical Officer - OMR 1200 -1406</p><br></li></ul><p><strong>Perks and other Benefits</strong></p><ul><li><p>Tax free Salary</p></li><li><p>Family Visa</p></li><li><p>Free Tickets to and fro</p></li><li><p>36 days paid annual leave</p></li></ul><p>• • 5 days a week / 8 hours a day working</p><br><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Positions / Specialities Required:</strong></p><br><ul><li><p>Anesthesia</p></li><li><p>Critical Care</p></li><li><p>Cardiology</p></li><li><p>Internal Medicine</p></li><li><p>ENT</p></li><li><p>Obstetrics &amp; Gynecology (OB-GYN)</p></li><li><p>General Surgery</p></li><li><p>Emergency Medicine</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Consultant (age below 50) — any one of:</strong></p><ul><li><p>MBBS + Internship + MCh + 6 years' experience</p></li><li><p>MBBS + Internship + DM (or equivalent) + 7 years' experience</p></li><li><p>MBBS + Internship + MD/MS (or equivalent) + 12 years' experience in the specialty after the Master's</p><br></li></ul><p><strong>Senior Specialist (age below 50) — any one of:</strong></p><ul><li><p>MBBS + Internship + DM/MCh (or equivalent) + 2 years' experience</p></li><li><p>MBBS + Internship + MD/MS (or equivalent) + 9 years' experience in the specialty after the Master's</p><br></li></ul><p><strong>Specialist (age below 45):</strong></p><ul><li><p>MBBS + Internship + MD/MS (or equivalent) + 3 years' experience after the Master's</p><br></li></ul><p><strong>Medical Officer (age below 45):</strong></p><ul><li><p>MBBS (or equivalent) + 5 years' experience, with the last 3 years full-time in the specialty</p></li></ul><p>Please Note : Practice in an unregistered private clinic is not accepted</p><br><p><strong>Salary Structure</strong></p><ul><li><p>Consultant - OMR 4245</p></li><li><p>Sr. Specialist - OMR 3325</p></li><li><p>Specialist - OMR 2145</p></li><li><p>Medical Officer - OMR 1200 -1406</p><br></li></ul><p><strong>Perks and other Benefits</strong></p><ul><li><p>Tax free Salary</p></li><li><p>Family Visa</p></li><li><p>Free Tickets to and fro</p></li><li><p>36 days paid annual leave</p></li></ul><p>• • 5 days a week / 8 hours a day working</p><br><p></p></section>

<p>We are looking for a Safety Officer to support our heat exchanger maintenance project at OQ Refinery, Oman. The Safety Officer will be responsible for monitoring site safety, conducting inspections, supporting risk assessments, ensuring compliance with HSE procedures, and promoting a strong safety culture at the worksite.</p><p>Key Responsibilities</p><ul><li><p>Monitor and enforce HSE rules and procedures at the worksite.</p></li><li><p>Conduct daily safety inspections and identify unsafe conditions.</p></li><li><p>Support preparation and review of Risk Assessments, JSA and Method Statements.</p></li><li><p>Monitor Permit-to-Work (PTW) activities.</p></li><li><p>Ensure compliance with safety requirements for confined space, hot work, working at height and LOTO.</p></li><li><p>Conduct toolbox talks and safety inductions.</p></li><li><p>Support incident and near-miss investigations.</p></li><li><p>Monitor safety during heat exchanger maintenance activities, including hydrojetting, chemical cleaning, retubing, blinding/deblinding and lifting activities.</p></li><li><p>Ensure proper use of PPE and compliance with site safety requirements.</p></li><li><p>Prepare and maintain HSE reports and records.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>NEBOSH certification is required.</strong></p></li><li><p>Bachelor's degree/Diploma in Occupational Health & Safety, Engineering, or a related technical field.</p></li><li><p>Good knowledge of HSE procedures and workplace safety.</p></li><li><p>Knowledge of Oil & Gas / Refinery safety practices will be an advantage.</p></li><li><p>Candidates with knowledge of heat exchanger maintenance activities will be preferred.</p></li><li><p>Freshers / candidates without previous experience may also apply.</p></li><li><p><strong>Omani National</strong></p></li><li><p>Good communication and interpersonal skills.</p></li></ol>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Role: Anesthesiologist</b></p><p>Industry Type: Medical Services / Hospital</p><p>Department: Healthcare &amp; Life Sciences</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Doctor</p><p>Education</p><p>UG: M.B.B.S. in Medicine</p><p>PG: Medical-MS/MD in Anaesthesiology, Diplomate of National Board (DNB) in Anaesthesia</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>MIN 3 YR OF EXP</li><li>POSITIONS : MEDICAL OFFICER , SPECIALIST, SEN SPECIALIST, CONSULTANT</li></ul><p></p></section>

<p>The Global Green Growth Institute (GGGI) is a treaty-based international, inter-governmental organization dedicated to supporting and promoting strong, inclusive and sustainable economic growth in developing countries and emerging economies. To learn more please visit about GGGI web page. In the Sultanate of Oman, GGGI has partnered with the Government through the leadership of the Environment Authority (EA) to develop the "Accelerating Resilience and Innovation for Sustainable Ecosystems management" (ARISE) Program . The ARISE Program is a USD 100 million initiative spanning six years, designed to deliver climate action, ecosystem restoration, and economic growth through Nature-based Solutions (NbS) integrated into the Bioeconomy and Sustainable Special Economic Zones (SSEZs) . The program ultimately targets the restoration of 30,000 hectares of land, an estimated 750,000 tCO2e/year in greenhouse gas emission reductions, and the creation of over 1,000 green jobs. The implementation of the ARISE Program is structured around two phases. Phase 1 will cover 2 years, and Phase 2 will be over 4 years. The funding has been approved for Phase 1. POSITION SUMMARY Based in Salalah, in Dhofar Governorate, Oman, the MEL &amp; Data Officer plays a key role as the MEL focal point for the Oman ARISE Program. Reporting directly to the ARISE Program Lead, this position supports the on-the-ground delivery of the multi-year program s results framework. The Officer will work in close collaboration with the Regional MEL Senior Officer for the Middle East and North Africa (MENA) to implement GGGI s organizational-wide MEL framework at the program level. This role involves coordinating MEL implementation, data collection, analysis, and visualization, learning &amp; reporting following the comprehensive MEL plan for ARISE, including supporting baseline assessments such as Knowledge, Aptitude, and Practices (KAP) surveys and ecological data tracking. Additionally, the Officer will collaborate with the Program Implementation Unit (PIU) to create tailored MEL tools, assist in internal and external reporting, and contribute to the capacity of local partners and government stakeholders. PURPOSE • Coordinate the implementation and periodic review of MEL framework and MEL Plan specifically for the Oman ARISE Program, ensuring alignment with overall program objectives and GGGI s global MEL standards. • Support updates to the Theory of Change (TOC) and Detailed Implementation Plan (DIP) based on field validations and data collection. • Coordinate and execute formal baseline assessments including integrating GIS spatial data, GHG emission tracking, and socio-economic data within the first months of the inception phase. • Collaborate with the Program Lead and technical experts to design tailored mobile data collection tools and dashboards that effectively monitor and evaluate program outputs and outcomes. • Compile lessons learned and best practices to refine the program s adaptive management strategies. ENGAGEMENT • Collaborate with program team members to design, test, and implement tailored MEL and data collection tools that effectively monitor and evaluate community-level project activities. • Maintain close communication with the RO-MENA and collaborates closely with the Regional MEL Senior Officer (MENA) to ensure adherence and contribute to GGGI s Project/Program Cycle Management (PCM) guidelines and MEL methodologies. • Engage actively with key Omani government stakeholders, including the Environment Authority (EA), the National Centre for Statistics and Information (NCSI), and the Oman Zero Carbon Center, to align program MRV methodologies with national tracking systems and NDCs. • Partner with local academic institutions, primarily the Dhofar University Biodiversity Research Center (BRC), to execute randomized field surveys, focus group discussions, and ecological data triangulation. DELIVERY • Coordinate and support mixed-methods baseline assessments, including large-scale KAP surveys targeting Dhofar communities, ensuring high-quality data collection following statistically valid random sampling frameworks.&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p>Master's degree or equivalent in economics, statistics, data science, environmental science, development studies, or a related field.</p><p>A minimum of 5 years of professional experience in monitoring and evaluation, data analysis, and program development for large-scale international development or climate finance projects.</p><p>Demonstrated expertise in quantitative and qualitative data analysis software (e.g., R, Python, MAXQDA) and advanced Microsoft Excel (VBA).</p><p>Proven experience utilizing mobile data collection platforms (Kobo Toolbox, Ona, etc.) and developing user-friendly digital survey forms.</p><p>Exceptional analytical, writing, and presentation skills in English are required.</p><p>Fluency in Arabic is an asset for this role and is highly desirable.</p><p>Strong written and verbal communication skills in English; ability to draft high-quality MEL frameworks, evaluation reports, and technical documents.</p><p>Strong project management and coordination skills, including experience working with governments (e.g., Environment Authority), development partners, and technical experts.</p><p>Ability to interpret technical analysis, GIS mapping, and GHG modeling outputs and translate them into actionable MEL insights and policy-level reporting.</p><p>Strong background in developing complex logframes and impact tracking mechanisms, particularly for climate change, agriculture, or Nature-based Solutions (NbS).</p><p>Ability to coordinate consultants, enumerators, and data collection activities across multiple stakeholders without direct line management authority.</p><p>Strong organizational skills and attention to detail, with the ability to manage competing priorities and meet deadlines in a time-sensitive environment.</p><p>Solutions-oriented and collaborative approach to problem solving in a multi-stakeholder setting.</p><p>Understand and actively support GGGI's mission, vision and values.</p><p>Promote an organizational culture of trust, transparency, respect and partnership.</p><p>Excel at problem solving, ask questions and seek support when needed, share easily information and knowledge with others both internally as externally.</p><p>Manage emotions and stress positively, build rapport and resolves conflict easily.</p><p>Strong ability to work independently and/or remotely, while maintaining productivity.</p>

<p><h4>Job overview:</h4> <p>The primary responsibility of a Care Advisor is to handle telephone inquiries related to the company’s products and services, adhering to established scripts and procedures. The role requires ensuring that all calls are answered within defined service levels while maintaining the highest standards of customer service excellence. In addition, the Care Advisor is responsible for accurately documenting details of each interaction, including actions taken, to facilitate follow-ups and any necessary corrective measures. The role also involves maintaining effective communication with the Care Centre Team Leader and Assistant Manager, while consistently delivering a customer-focused service experience.</p> <h4>Key responsibilities:</h4> <ul> <li>Promotes a customer-centric culture within the Care Centre by delivering effective solutions to customer concerns and inquiries.</li> <li>Adheres to communication and update standards in line with Nextcare policies, scheme requirements, and agreed turnaround times.</li> <li>Handles inbound calls and assists customers and providers with specific requests and inquiries.</li> <li>Conducts outbound calls for case follow-ups, collection of medical reports, second opinions, and complaint management.</li> <li>Enhances customer awareness and engagement with the company’s products and services.</li> <li>Delivers high-quality, personalized customer service at all times.</li> <li>Maintains and updates customer/member records and ensures data accuracy in the system.</li> <li>Records details of interactions and actions taken to support continuity and follow-up.</li> <li>Maintains effective communication with the Care Centre Team Leader and Assistant Manager.</li> <li>Ensures proper documentation, call closure, and coordination with relevant departments.</li> <li>Evaluates issues thoroughly and provides logical solutions within the defined scope of authority.</li> <li>Reviews and processes pre-approval cases exceeding standard turnaround times to ensure timely resolution.</li> <li>Issues Guarantee of Payment (GOP) documents as required to support seamless patient care.</li> <li>Works effectively with AI, machine learning, data analytics, and cloud-based tools while adhering to high standards of data governance, security, and ethical use.</li> </ul> <h4>Key requirements:</h4> <ul> <li>Bachelor’s degree; medical background preferred.</li> <li>0-2 years experience in a call centre/customer service environment; TPA hospitals or medical centers exposure is a plus.</li> <li>Strong communication skills in English (additional languages are an advantage).</li> <li>Good understanding of customer service principles and telephone etiquette.</li> <li>Physically fit to carry out duties.</li> <li>Legally permitted to work in the country of operations.</li> <li>Fluency in MS Office (Excel, Word, Outlook, PowerPoint) and general internet navigation and research skills.</li> </ul> <p>Allianz Group is one of the most trusted insurance and asset management companies in the world. Caring for our employees, their ambitions, dreams, and challenges is what makes us a unique employer. Together we can build an environment where everyone feels empowered and has the confidence to explore, to grow, and to shape a better future for our customers and the world around us.</p> <p>At Allianz, we stand for unity: we believe that a united world is a more prosperous world, and we are dedicated to consistently advocating for equal opportunities for all. The foundation for this is our inclusive workplace, where people and performance both matter, and nurtures a culture grounded in integrity, fairness, inclusion, and trust.</p> <p>We therefore welcome applications regardless of ethnicity or cultural background, age, gender, nationality, religion, social class, disability, sexual orientation, or any other characteristics protected under applicable local laws and regulations.</p> <p>Great to have you on board. Let's care for tomorrow.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>JOB PURPOSE:</b></p> <p><b>Electric work for ship repair</b></p> <p><b>KEY ACCOUNTABILITIES:</b></p> <p>Description</p> <p>Day-to-Day Operations</p> <p>Plan and organized materials, tools and other resources require to undertake works where nominated</p> <p>Implement safety procedure on the work site accordance with ODC rules and regulations</p> <p>Accept responsibility for the day-to-day activities require and undertaken at the work site</p> <p>Assist with instrument/electrical operational checkout</p> <p>Workmanship must meet the ODC quality standard</p> <p>Installation, maintenance and repair of electrical equipment and associated control devices</p> <p>Co-operate with co-workers including Senior/ Foreman in creating smooth work flow, including assisting with each other work when necessary</p> <p>Instruct and direct subordinates as required</p> <p>Assist in testing, installation and commissioning of electrical/instrumentation equipment</p> <p>Maintain and compile relevant records on maintenance and repair works</p> <p>Provide feedback about the efficiency and operation of the systems installed and maintenance to the management when requested</p> <p>Worked to be completed within agreed time tables</p> <p>Unauthorized works are not being undertaken</p> <p>Attitude to other employees/contractors to be co-operative/positive and harmony to be maintained</p> <p>Adherence to working time and obligations to occupational health and safety act</p> <p>Show proper care and maintenance of hand tools and equipment and plant given by the ODC and obliged to show for the given tools and bags when inspections needed by the engineer/ in charge</p> <p>Responsibility for workplace activities accepted within agreed delegation and cleans the place of work before and after completion of the work</p> <p>Adherence to mobile use policy according to regulation at ODC</p> <p>Implemented the Business Ethics and Core Values of the Department are in proper manner</p> <p>Carrying out and controlling/Supervision of the repair work of Electric motor, lighting, cable change, Switch board cleaning etc.</p> <p>Prepare and study technical drawings, specifications of electrical systems to ensure that Installation and operations conform to standards and customer requirements.</p> <p>Carrying out and controlling/Supervision of Navigation and communication system etc.</p> <p>Attending on board meeting in daily basis during project period.</p> <p>Identify all the jobs from day one and prepare the repair plan accordingly.</p> <p>Troubleshoot and provide technical advice to the foremen on project, from starting to completion Of the repair works to support them in achieving their jobs.</p> <p>Follow up safety rules and regulations, orders by Superiors.</p> <p>Provide complete and accurate reports to Superior on duty</p> <p>May work without supervision on the night shift, if required</p> <p>Perform any other duties as needed to facilitate smooth operations at the discretion of Line Manager </p> <p>Quality, Health, Safety, &amp; Environment</p> <p>Ensure compliance to all relevant quality, health, safety and environmental management policies, procedures and controls across the department to guarantee employee safety, delivery of high quality products / services and responsible environmental attitude</p> <p>QUALIFICATIONS, EXPERIENCE &amp; SKILLS:</p> <p>Minimum Qualifications:</p> <p>Bachelor s degree in electrical engineering or naval architecture or equivalent</p> <p>Minimum Experience:</p> <p>3 - 5 years experience with minimum 3 years of experience in marine industry</p> <p>Skills</p> <p>Requires a good understanding of general mechanical drawing, mechanical process and sequence drawing</p> <p>Requires good skill in Word, Excel, Power point etc.</p> <p> </p> <p>Good communication and interpersonal skill in English is a must</p> <p> </p> <p>Exposure to ISO 9001-2000 standards</p> <p> </p> <p><br></p> <p> </p> <p> </p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Architecte Électronique Embarquée – Systèmes Autodirecteurs &amp; Missiles de Nouvelle Génération F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Rejoignez l'Unité d'Ingénierie Électronique Guidage de Safran Electronics &amp; Défense et devenez un acteur majeur de la conception et développement des architectures électroniques qui équiperont les autodirecteurs et missiles de demain. Notre dynamique d'innovation, illustrée par des réalisations telles que l'implémentation interne de réseaux de neurones sur FPGA, la miniaturisation avancée des cartes d'alimentation, ou encore la cybersécurité embarquée sur-mesure, fait de nous un référent du secteur.<br>Spécificité du poste : <br>Au sein d'équipes multidisciplinaires, vous participerez à toutes les étapes : du recueil des besoins clients jusqu'à la qualification finale, en passant par la définition des architectures électroniques intégrant des sous-systèmes complexes (optronique, IA embarquée, asservissement moteur, cybersécurité…), la coordination de spécialistes d'horizons variés (électronique, logiciel, mécanique, FPGA), et l'intégration précoce des contraintes d'industrialisation.<br>Vous serez impliqué dans la structuration technique, la validation fonctionnelle, et l'amélioration continue des équipements, garantissant ainsi leur robustesse en environnement exigeant. En tant qu'architecte, vous valoriserez le savoir-faire par la capitalisation documentaire et le partage d'expérience, tout en étant le garant de l'innovation et de la satisfaction client.<br>Chez Safran, nous valorisons l'esprit d'initiative, la créativité et la diversité des profils : être architecte, c'est avoir un vrai impact sur la transformation technologique et contribuer à des projets stratégiques qui soutiennent la souveraineté et la sécurité.</p><br><br><p>Intégrez un environnement dynamique où l'innovation collective et la coopération sont au cœur du quotidien.<br>• Parcours d'intégration personnalisé et accès à des opportunités de formation et d'évolution, au sein d'un acteur mondial des hautes technologies.<br>• Equilibre vie professionnelle/vie personnelle respecté, avec la possibilité de télétravail quelques jours par semaine suivant la nature des activités<br>• Package attractif : rémunération compétitive, intéressement, avantages groupe, accompagnement individualisé.<br>• Des équipes engagées sur des projets à fort impact, contribuant à la souveraineté technologique et à la sécurité nationale.<br>• Valorisation du partage d'expérience et implication de chacun dans la montée en compétences.<br>• Accès aux dispositifs de développement professionnel et à un réseau interne d'experts.<br>Rejoindre Safran, c'est faire partie d'une communauté qui transforme l'innovation en réalité, et où votre contribution concrète compte pour l'avenir.</p><br><br><p>Diplômé(e) Bac+5 (école d'ingénieur ou équivalent), vous bénéficiez d'une expérience significative (minimum 5 ans) en conception et architecture de systèmes électroniques embarqués, acquise idéalement dans des secteurs à fortes exigences (défense, aéronautique, spatial).<br>Compétences :<br>• Maîtrise du cycle complet de développement de calculateurs électroniques (PCB, FPGA, SoC), de la conception à l'industrialisation, avec des contraintes temps réel critiques.<br>• Solides connaissances des bus numériques standards (SPI, Ethernet, I2C, RS422...) et spécifiques (1553…).<br>• Aptitude à comprendre et intégrer les contraintes des algorithmes : traitement d'images, navigation, asservissement moteur, réseaux de neurones embarqués.<br>• Notions d'ingénierie système (MBSE) et connaissance de la norme DO-254 seraient appréciées.<br>• Intérêt marqué pour les systèmes optroniques et autodirecteurs complexes.<br>Qualités personnelles :<br>• Expérience avérée en coordination de projets et fédération d'équipes pluridisciplinaires.<br>• Autonomie, rigueur, esprit d'analyse et créativité technique.<br>• Très bonnes capacités rédactionnelles et aptitudes à la communication en français et anglais.<br>• Adaptabilité, dynamisme et envie d'avoir un impact concret : transformer des idées en réalisations mesurables.<br>Nous valorisons la diversité des expériences et encourageons la candidature de profils singuliers : l'innovation naît des trajectoires variées et du partage d'expertise.</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Ingénieur-e SLI / Support Produit « Systèmes de Drones » expérimenté-e F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Acteur incontournable dans le domaine des hautes technologies de l'optronique, de l'inertiel et de la navigation, le site de Safran Electronics &amp; Defense d'Eragny situé à 20 min de Paris rassemble environ 1300 salariés et dispose d'infrastructures ludiques tels qu'une salle de créativité, un espace de convivialité, et sportives à proximité. <br>Son Centre de Soutien Technique Drones (CSTD) de la Direction du Support et Service Client Défense recherche son-sa futur-e ingénieur-e SLI/Support Produit expérimenté-e « Systèmes de Drones » intéressé-e par les systèmes complexes et la haute technologie. <br>Vous êtes à la recherche d'un poste dynamique et complet ? Cette offre est faite pour vous ! De par votre expérience et votre polyvalence, vous participerez à la conception du système de soutien de nos « systèmes de Drones » et serez également acteur-trice de leur déploiement et de leur support en exploitation. Vos connaissances des standards SLI (ASD S-Series) et des environnements aéronautiques vous permettrons d'assurer vos principales missions : <br>1. Pendant la phase de développement des produits : <br> - Définir et développer le système de soutien au sein de l'équipe Projet par délégation de l'équipe Programme ;<br> - Piloter, avec toutes les parties prenantes, les activités d'ingénierie de support pour définir les éléments de soutien des produits à développer pour supporter les produits après leur entrée en service : plan de maintenance, documentation technique, outils, bancs, formation et rechanges, etc. ; <br> - Réaliser les études de support à la maintenance (maintenabilité, testabilité et réparabilité) du produit et caractériser son système de soutien en cohérence du concept de maintenance retenu ; <br> - Spécifier, dimensionner et contribuer au développement du système de soutien et au maintien de ce système tout au long du cycle de vie du produit ; <br> - Piloter le processus de management de la donnée du système de soutien au sein du processus support ; <br>2. Pendant la phase d'exploitation des produits, vous êtes capable de : <br> - Suivre le comportement des produits en service ; <br> - Être garant du Référentiel technique du dossier d'entretien ; <br> - Supporter techniquement nos clients internes (Directions technique, programme, industrielle) et externes (clients, fournisseurs ...) en s'appuyant sur les experts de divers domaines et avec pour objectif la satisfaction du client : <br> o Réponse technique aux clients et ateliers de maintenance ; <br> o En cas d'événements en opération, résolution de problème à travers diverses étapes : investigation, identification des solutions et rédaction du rapport ; <br> o Participation à la mise à jour des documentations techniques ; <br> o Contribuer à la production des livrables contractuels ; <br> - Réaliser et exploiter les retours d'expériences opérationnelles ; <br> - Contribuer au développement de nouveaux services/produits</p><br><br><p>Dans le cadre de vos activités, vous serez amené-e à effectuer des déplacements en France (principalement) ou à l'étranger (occasionnellement) pendant les phases de développement et d'exploitation des produits de votre périmètre (centres d'essais en vol, bases aériennes, terrestres ou navales, etc.).</p><br><br><p>De formation bac+5, Ingénieur généraliste et/ou aéronautique, vous avez une expérience réussie d'au moins 5 ans dans l'industrie et le domaine du support client.<br>Vous savez faire preuve de rigueur et disposez d'une grande autonomie tout en étant animé d'un excellent esprit d'équipe. <br>De nature pragmatique, avec une grande capacité d'analyse et de synthèse, vous avez le sens de l'engagement pour mener à bien vos missions.<br>Reconnu pour vos excellentes connaissances métier SLI, et de par votre expérience, vous avez la capacité à encadrer une petite équipe d'ingénieur SLI. Vous êtes pédagogue, et vous avez à coeur de transmettre et d'accompagner la montée en compétence de l'équipe. </p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br> Job Description<br> <br> EMPLOYEE JOB DESCRIPTION JOB PURPOSE: Electric work for ship repair KEY ACCOUNTABILITIES: Description Day-to-Day Operations Plan and organized materials, tools and other resources require to undertake works where nominated Implement safety procedure on the work site accordance with ODC rules and regulations Accept responsibility for the day-to-day activities require and undertaken at the work site Assist with instrument/electrical operational checkout Workmanship must meet the ODC quality standard Installation, maintenance and repair of electrical equipment and associated control devices Co-operate with co-workers including Senior/ Foreman in creating smooth work flow, including assisting with each other work when necessary Instruct and direct subordinates as required Assist in testing, installation and commissioning of electrical/instrumentation equipment Maintain and compile relevant records on maintenance and repair works Provide feedback about the efficiency and operation of the systems installed and maintenance to the management when requested Worked to be completed within agreed time tables Unauthorized works are not being undertaken Attitude to other employees/contractors to be co-operative/positive and harmony to be maintained Adherence to working time and obligations to occupational health and safety act Show proper care and maintenance of hand tools and equipment and plant given by the ODC and obliged to show for the given tools and bags when inspections needed by the engineer/ in charge Responsibility for workplace activities accepted within agreed delegation and cleans the place of work before and after completion of the work Adherence to mobile use policy according to regulation at ODC Implemented the Business Ethics and Core Values of the Department are in proper manner Carrying out and controlling/Supervision of the repair work of Electric motor, lighting, cable change, Switch board cleaning etc. Prepare and study technical drawings, specifications of electrical systems to ensure that Installation and operations conform to standards and customer requirements. Carrying out and controlling/Supervision of Navigation and communication system etc. Attending on board meeting in daily basis during project period. Identify all the jobs from day one and prepare the repair plan accordingly. Troubleshoot and provide technical advice to the foremen on project, from starting to completion Of the repair works to support them in achieving their jobs. Follow up safety rules and regulations, orders by Superiors. Provide complete and accurate reports to Superior on duty May work without supervision on the night shift, if required Perform any other duties as needed to facilitate smooth operations at the discretion of Line Manager &nbsp; Quality, Health, Safety, &amp; Environment Ensure compliance to all relevant quality, health, safety and environmental management policies, procedures and controls across the department to guarantee employee safety, delivery of high quality products / services and responsible environmental attitude &nbsp; &nbsp; QUALIFICATIONS, EXPERIENCE &amp; SKILLS: Minimum Qualifications: Bachelor’s degree in electrical engineering or naval architecture or equivalent Minimum Experience: 3 - 5 years experience with minimum 3 years of experience in marine industry &nbsp; Skills Requires a good understanding of general mechanical drawing, mechanical process and sequence drawing Requires good skill in Word, Excel, Power point etc. Good communication and interpersonal skill in English is a must Exposure to ISO 9001-2000 standard<br> <br><b> Job Requirements</b><br><b> Minimum Qualification :<br></b> Bachelor Degree<br><b> Experience :<br></b> You should have Experience of Minimum 3 years to apply for this Job<br><br></div></section>