Mechanical Engineering Jobs in Oman

<p><b>Job purpose</b></p><p><br></p><p>Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework.</p><p><br></p><p>&nbsp;</p><p><br></p><p>The position will act in accordance with the OQEP’s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani’s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><br></p><p><b>Main Tasks and Responsibilities</b></p><p><br></p><p>Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications.</p><p>Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities.</p><p>Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation.</p><p>Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent).</p><p>Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP.</p><p>Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects.</p><p>Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards.</p><p>Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase.</p><p>Support the preparation and review of technical safety documentation for regulatory submissions and engineering authority approvals.</p><p>Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle.</p><p>Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes.</p><p>Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments.</p><p>Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly.</p><p>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</p><p>Perform other related duties as assigned.</p><p>Key interactions</p><p><br></p><p>Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function.</p><p><br></p><p>External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities.</p><p><br></p><p>Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><b><br></b></p><p><b>Education requirements</b></p><p><br></p><p>Required: Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</p><p><br></p><p>Preferred: Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (TÜV or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</p><p><br></p><p>Language</p><p><br></p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p><br></p><p>Background and experience</p><p><br></p><p>Competencies and skills</p><p><br></p><p>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</p><p>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</p><p>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</p><p>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</p><p>Exposure to Fire &amp; Gas system design and philosophy development.</p><p>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</p><p>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</p><p>Soft:</p><p><br></p><p>Strong analytical and problem-solving skills.</p><p>Good communication skills, verbal and written.</p><p>Attention to detail and high level of technical accuracy.</p><p>Ability to work effectively in multidisciplinary project teams.</p><p>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</p><p>Ability to manage competing priorities in a project environment.</p><p>Cultural sensitivity in a multinational environment.</p><p>&nbsp;</p><p><br></p><p>Technical:</p><p><br></p><p>Computer literacy including MS Office and engineering software.</p><p>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</p><p>Quantitative and qualitative risk assessment techniques.</p><p>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</p><p>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</p><p>Fire &amp; Gas detection system design and philosophy.</p><p>Safety Case development and Major Accident Hazard (MAH) management.</p><p>Process safety engineering principles.</p><p>Applicable international standards (API, IEC, NFPA, IP codes).</p><p>Technical documentation and report writing.</p><p>&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking experienced Maintenance Technicians with a minimum of 7 years of experience in luxury residences, palaces, embassies, hotels, stadiums, commercial buildings, facilities management, oil &amp; gas, or other high-profile properties. The selected candidates will be responsible for preventive and corrective maintenance activities to ensure the safe, efficient, and uninterrupted operation of a VVIP residence. The role includes electrical, HVAC, plumbing, mechanical, and general building maintenance while maintaining the highest standards of professionalism, confidentiality, and service excellence. The position requires on-call availability for emergency maintenance requirements and involves both indoor and outdoor work, including lifting, climbing ladders, and other physical maintenance tasks.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Perform preventive and corrective maintenance of buildings, utility systems, and associated facilities.</p></li><li><p>Conduct routine inspections and identify maintenance issues before failures occur.</p></li><li><p>Carry out minor repairs on electrical, plumbing, HVAC, mechanical, carpentry, and building systems.</p></li><li><p>Maintain lighting systems, distribution boards, switches, sockets, and related equipment.</p></li><li><p>Repair plumbing fixtures, water supply systems, drainage systems, pumps, and sanitary installations.</p></li><li><p>Assist in maintaining HVAC systems, including split units, VRF systems, FCUs, AHUs, and ventilation systems.</p></li><li><p>Perform mechanical maintenance on pumps, motors, and rotating equipment.</p></li><li><p>Carry out furniture repairs and minor carpentry work.</p></li><li><p>Support maintenance of swimming pools, fountains, irrigation systems, gardens, and external facilities.</p></li><li><p>Respond promptly to emergency breakdowns and maintenance requests.</p></li><li><p>Maintain service reports, maintenance records, and spare parts inventories.</p></li><li><p>Coordinate with contractors and service providers.</p></li><li><p>Follow all HSE, security, and access-control procedures.</p></li><li><p>Maintain strict confidentiality regarding VVIP family activities and property information.</p></li></ul><p>Available Positions &amp; Requirements</p><p>AC Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Refrigeration &amp; Air-Conditioning Servicing (RAC) or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Strong knowledge of Chillers, AHUs, FCUs, CCUs, VRF Systems, and Central Plant Equipment</p></li><li><p>Experience in brazing, compressor replacement, HVAC troubleshooting, and preventive maintenance</p></li><li><p>Background in facilities management, commercial buildings, stadiums, or oil &amp; gas projects</p></li></ul><p>Electrician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Electrical Installation &amp; Maintenance or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Knowledge of MCC Panels, DBs, SMDBs, UPS Systems, Generators, and LV Systems</p></li><li><p>Strong troubleshooting and preventive maintenance experience</p></li><li><p>Experience in industrial plants, stadiums, or facilities management environments</p></li></ul><p>Electronic Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Electronics Products Assembly &amp; Servicing or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience with CCTV, BMS, PA Systems, Access Control Systems, Sliding Gates, and ELV Systems</p></li><li><p>Strong troubleshooting skills</p></li></ul><p>Fire Alarm Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Electrical/Electronics Technology or Fire Detection Systems or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience with Addressable &amp; Conventional Fire Alarm Systems, FM-200, Deluge Systems, Foam Systems, Fire Fighting Control Panels, Access Control Systems, UPS, and DC Systems</p></li><li><p>Strong fault-finding and preventive maintenance experience</p></li></ul><p>Mechanical Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Mechanical Technology, Industrial Mechanics, or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience with CHW Pumps, Cooling Tower Gearboxes, Motors, Rotating Equipment, and Pump Alignment</p></li><li><p>Strong troubleshooting and preventive maintenance knowledge</p></li></ul><p>Plumber</p><p>Requirements:</p><ul><li><p>TESDA NC III in Plumbing or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience in plumbing systems, sanitary installations, water supply networks, drainage systems, and PPR piping works</p></li><li><p>Strong troubleshooting, reporting, and documentation skills</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>An internship is your opportunity to understand how we work and whether our culture is right for you. It's also your chance to show us that you have the right skills and attitude to succeed here. Our internships are paid positions, and last between a few months to a whole year-offering opportunities to use what you've learned at university on real projects.</p><br><p>We offer two different internships in Operations. If you're applying for a Field Engineer internship, you must have completed your second year of an undergraduate degree in engineering or a relevant science. If you're applying for a Field Specialist internship, you must be working towards a two-year technical diploma or associate degree.</p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Planning Engineer</strong></p><p>Location : Muscat, Oman</p><p>Employment Type</p><p>Full-Time</p><p>Company: Timberworks</p><br><p>We are a leading Interior Fit-Out and Contracting company delivering high-quality commercial, hospitality, retail, residential, and turnkey fit-out projects. We are seeking an experienced Planning Engineer to join our team and take ownership of planning, monitoring, and reporting across multiple ongoing projects.</p><br><p><strong>Job Summary</strong></p><p>The Planning Engineer will be responsible for the overall planning, scheduling, monitoring, and coordination of multiple fit-out and contracting projects. This role will serve as the central point of contact for project progress and performance, ensuring management has accurate and up-to-date information regarding project status, milestones, risks, delays, resource allocation, cash flow, and payment tracking.</p><br><p>The ideal candidate should possess strong project planning expertise, excellent analytical skills, and the ability to manage and monitor multiple large-scale projects simultaneously.</p><br><p><strong>Key Responsibilities-</strong></p><ul><li><p>Develop, maintain, and monitor detailed project schedules for multiple fit-out and contracting projects.</p></li><li><p>Prepare baseline programs, recovery plans, look-ahead schedules, and revised project schedules as required.</p></li><li><p>Track project progress against approved schedules and identify potential delays or risks.</p></li><li><p>Monitor and report the status of all ongoing projects, including planning, procurement, execution, handover, and closeout stages.</p></li><li><p>Act as the primary source of project information for management and stakeholders.</p></li><li><p>Coordinate with Project Managers, Site Engineers, Procurement Teams, Quantity Surveyors, and Finance Departments to obtain accurate project updates.</p></li><li><p>Prepare weekly and monthly progress reports, dashboards, and management presentations.</p></li><li><p>Monitor project milestones, critical paths, and resource utilization.</p></li><li><p>Identify schedule deviations and recommend corrective actions to ensure timely project completion.</p><br></li><li><p>Maintain complete visibility of all projects under management, including:</p></li></ul><ol><li><p>Current project stage</p></li><li><p>Progress percentage</p></li><li><p>Key achievements</p></li><li><p>Pending activities</p></li><li><p>Risks and concerns</p></li><li><p>Procurement status</p></li><li><p>Payment and billing status</p></li><li><p>Variation orders and claims</p></li><li><p>Expected completion dates</p><br></li></ol><ul><li><p>Monitor contractor, subcontractor, and supplier performance against project schedules.</p></li><li><p>Assist management in project forecasting, resource planning, and workload distribution.</p></li><li><p>Support tender planning by preparing preliminary schedules and manpower histograms when required.</p></li><li><p>Ensure all project planning records and documentation are properly maintained and updated.</p></li></ul><br><p><strong>Requirements-</strong></p><br><p><strong>Qualifications</strong></p><ul><li><p>Bachelor’s Degree in Civil Engineering, Construction Management, Project Management, or a related field.</p></li></ul><br><p><strong>Experience</strong></p><ul><li><p>Minimum 5–6 years of experience as a Planning Engineer.</p></li><li><p>Proven experience in Interior Fit-Out, Contracting, Construction, or Turnkey Projects.</p></li><li><p>Experience managing and monitoring multiple projects simultaneously.</p></li><li><p>Strong understanding of project lifecycle management from initiation to handover.</p></li><li><p>Experience working on large-scale commercial, hospitality, retail, residential, or mixed-use projects is highly preferred.</p></li></ul><br><p><strong>Technical Skills</strong></p><ul><li><p>Proficiency in<strong> Primavera P6 (Mandatory).</strong></p></li><li><p>Strong knowledge of Microsoft Project.</p></li><li><p>Advanced Microsoft Excel skills.</p></li><li><p>Familiarity with Power BI and project reporting tools is an advantage.</p></li><li><p>Understanding of project cost control and cash flow monitoring.</p></li><li><p>Knowledge of procurement tracking and resource planning.</p></li></ul><br><p><strong>Key Competencies</strong></p><ul><li><p>Strong planning and scheduling capabilities.</p></li><li><p>Excellent analytical and problem-solving skills.</p></li><li><p>Ability to manage multiple projects concurrently.</p></li><li><p>Strong communication and coordination skills.</p></li><li><p>Detail-oriented with excellent organizational abilities.</p></li><li><p>Ability to work under pressure and meet deadlines.</p></li><li><p>Strong reporting and presentation skills.</p><br></li></ul><p><strong>What We Expect</strong></p><p>The successful candidate will have complete visibility across all company projects and be able to answer management queries regarding project status, progress, concerns, delays, resource requirements, procurement updates, and payment status at any given time. This role is critical in ensuring projects are delivered efficiently, on schedule, and in line with company objectives.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>-</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wood is recruiting for an Omani Telecom Engineer to join its Projects team focusing on delivering across FEED and Detail design scopes of work. In this role, you will be responsible to create Engineering deliverables and execute detail design under the supervision of a senior engineer for a specific project and ensure timely completion to the required quality standards. Assist senior engineer in developing and updating Office Qualty standards and add value to the work optimization process. Position is based in Oman for a long-term assignment. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws. What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. Experience: Degree in Relevant Engineering or equivalent. Good communicator and strong team player. Omani Telecom Engineer will be responsible for : Prepare Engineering deliverables. Conduct relevant Workshops and Reviews Contribute to Basis for Design Concept Selection, Project Specifications and detail design execution. Perform Engineering studies, review and maintain Quality and FEED Office standards affecting Telecoms in FEED Office. Designing the future. Transforming the world Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas. What we can offer Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details. Workmen s Compensation: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability. Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being. Typical responsibilities Responsible for initiating the First- Cut design of Telecom system under the accountability of Sr. Engineer Responsible for inititating meeting and technical solution discussions between several stake holders of the project. Responsible for obtaining As-Built information and aquiring solutions in the absence of As-built information Responsible for managing Technical Clarifications- on scope and needs. Responsible for coordination with the asset teams for the information Manage all technical changes internally and obtaining approval from Discipline Leads. Responsible for Scope change confirmation (TIN) Accountable for the Decision Making on changes Mange all Assurance Reviews and action close outs Accountable for Raising + Uploading +Liaising + Technical Variances Responsible for approving TPS Final reports Responsible for reviewing and approval of design and vendor documents in SPO. Responsible for obtaining DEM compliances. Maintaining a good relationship with the client is critical to the success of the (design) project and often requires visit to the site and/or client office. Be a team player where recognition of team performance as a whole is a greater priority than projecting individual contribution. Be able to work in a team environment and handle multiple project responsibilities. Application and maintenance of engineering processes, systems and tools (software). Follow/ensure Quality Management System Requirements are met in line with ISO 9PHONE_NUMBER and API Q2 2nd edition requirement. Shall be abreast with new Telecom technology and innovations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum 8 years experience in upstream oil &amp; gas Engineering. Minimum 3 years in FEED/ENGINEERING and Minimum 8 years in oil &amp; gas Experience.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job title </b>Sr. Engineer Turnaround Stream OQ8 Function Maintenance Department Turnaround Section Location Oman Duqm Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Head, Turnaround Direct reports</p><p>Job purpose:</p><p>Provides strong professional technical &amp; engineering expertise pertaining to Turnaround schedule / shutdown maintenance works, across OQ8, under TL Turnaround Execution scope s, acting as Technical Service provider of execution of turnaround under technical standards set by TSD to maintain the assets; through (1) Executing maintenance turnaround activities including shutdown works, equipment cleaning, inspection, repair, and replacement works, and Testing / commissioning, (2) Prepare the required report for the monitoring, control of the execution phase, and (3) Guide young engineers in Turnaround execution matters; in order to ensure maximum availability of plant at all times, optimizing the cost, time &amp; resource utilization, minimizing the down time and meeting the operational targets that support the gross margin / profitability with a sufficient organizational capability for business continuity while identifying &amp; developing talent people to as feeder for OQ8 talent pipeline.</p><p>The position will act in accordance with the OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Oman s government &amp; other legal justifications, and best international practices in consonance with national objectives. Scope (Engineer Turnaround Execution)</p><p>Turnaround Planning</p><p>Drive end to end planning of turnaround involving material and contract planning, stake holder management and coordination, resource management and optimization.</p><p>Turnaround Execution</p><p>Shutdowns or outages activities such as inspection, repair, replacement, and maintenance of equipment and facilities.</p><p>Inspection and Testing</p><p>Comprehensive inspection and testing of equipment, vessels, piping, and systems to identify any signs of damage, corrosion, leaks, or wear that need to be addressed</p><p>Maintenance and Repair</p><p>Repair or replacement of damaged or malfunctioning equipment, including pumps, compressors, turbines, heat exchangers, reactors, distillation columns, and other process units. This may involve activities such as welding, mechanical repairs, or reconditioning.</p><p>Cleaning and Decontamination</p><p>Cleaning of process equipment and systems to remove contaminants, deposits, and hazardous substances. This ensures optimal performance and minimizes the risk of operational issues.</p><p>Catalyst Replacement</p><p>Refineries often use catalysts in various processes. Turnarounds provide an opportunity to replace spent or deactivated catalysts with fresh ones to maintain efficiency and product quality.</p><p>Facility Upgrades</p><p>Implementation of modifications or upgrades to improve safety, reliability, efficiency, or compliance with environmental regulations.</p><p>Installing new equipment, upgrading control systems, or integrating new technologies.</p><p>Piping and Insulation</p><p>Inspection and repair of piping networks, valves, and fittings, as well as the replacement or repair of insulation to prevent heat loss or maintain proper temperature control.</p><p>Safety Measures</p><p>Implementation of strict safety protocols, including the training of personnel, adherence to permit-to-work systems, and the implementation of safety barriers to mitigate risks during the turnaround.</p><p>Environmental Compliance</p><p>Compliance with environmental regulations, such as the proper handling and disposal of hazardous materials, emissions monitoring, and implementation of pollution control measures.</p><p>Accountabilities:</p><p>Developing a turnaround plan for the execution</p><p>Works with the Turnaround Planning team to develop a comprehensive and integrated plan for the turnaround.</p><p>Identifying the scope of work, estimating the resources required, and developing a timeline for the execution of the work.</p><p>Procuring resources</p><p>Execute works with the procurement team to ensure that all the necessary resources, including materials, equipment, and personnel, are available for the turnaround.</p><p>Develop and review Scope of Works, prepare &amp; evaluate tender bid and prepare recommendations reports.</p><p>Managing the execution of work</p><p>Lead the execution of works, ensuring is conducted safely, efficiently, and in compliance with regulations.</p><p>Ensuring equipment manufacturers standards, procedures and safety regulations are followed by staff and contractors.</p><p>Develops work breakdown structures and recommends appropriate modifications and revisions for new work items assigned.</p><p>Establishes best maintenance practices &amp; systems to optimize resources and enhance turnaround / shutdown scheduled maintenance.</p><p>Proactively resolves issues during all phases of the schedule turnaround (including scope development &amp; start up to completion of turnaround activities).</p><p>Archives baseline and final schedules ensuring best practice for improvement is applied to turnaround schedule activities.</p><p>Conduct TA close out review and finalize close out report and conduct lessons learned workshop.</p><p>Coordinating with stakeholders</p><p>Works with a range of stakeholders, including maintenance teams, contractors, and operations personnel, to ensure that the turnaround is executed smoothly.</p><p>Monitoring progress</p><p>Monitoring the progress of the turnaround and providing regular updates to management.</p><p>Conduct meeting, prepare summary reports and provide daily update on the execution of the scheduled turnaround /shutdown maintenance.</p><p>Managing safety</p><p>Ensuring that all work is conducted in compliance with safety regulations and procedures.</p><p>Key interactions</p><p>Internal: All Maintenance Managers &amp; Engineers, Planners, Operations, Engineering, Technology, Procurement, Logistic &amp; HSE</p><p>External: Contractors, Vendors &amp; Suppliers Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Engineering (Mechanical, Electrical, Instrumentation) or related field.</li><li>Black Belt Certification, preferred</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Minimum 8 years of relevant experience within the Oil &amp; Gas / Refinery / Petrochemical industry, in a similar role.</li><li>Knowledge of: Computerized Maintenance Management Systems (CMMS), Expertise in SAP- PM Module., Primavera / MS Project</li><li>Hands on experience in turnround execution by executing multiple turnarounds involving complete process units.</li><li>Experience handling of maintenance contracts and procurement.</li><li>Experience in planning, scheduling of turnaround &amp; shutdown related jobs.</li><li>Familiar with material and international engineering applicable codes.</li><li>Coordinating projects and strategic initiatives from planning through execution and performance tracking.</li><li>Soft: Excellent interpersonal skills with strong customer service orientation. Demonstrated ability to direct, align, motivate, and develop planning staff. High level skills of planning &amp; organizing. Ability to delegate tasks and resources. Ability to manage multiple priorities in a diversified and critical environment. Possess analytical thinking in data analysis. Ability to pay attention to details. Ability to prioritize Turnaround maintenance activities. Flexibility to work on multiple planning task simultaneously. Ability to coordinate and influence peers.</li><li>Technical: Proficiency in M/S Office. Computerized Maintenance Management System (CMMS). Planning &amp; scheduling software. Ability to plan major shutdown projects. Well versed in maintenance &amp; technical specifications.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br> Job Description<br> <br> EMPLOYEE JOB DESCRIPTION JOB PURPOSE: Electric work for ship repair KEY ACCOUNTABILITIES: Description Day-to-Day Operations Plan and organized materials, tools and other resources require to undertake works where nominated Implement safety procedure on the work site accordance with ODC rules and regulations Accept responsibility for the day-to-day activities require and undertaken at the work site Assist with instrument/electrical operational checkout Workmanship must meet the ODC quality standard Installation, maintenance and repair of electrical equipment and associated control devices Co-operate with co-workers including Senior/ Foreman in creating smooth work flow, including assisting with each other work when necessary Instruct and direct subordinates as required Assist in testing, installation and commissioning of electrical/instrumentation equipment Maintain and compile relevant records on maintenance and repair works Provide feedback about the efficiency and operation of the systems installed and maintenance to the management when requested Worked to be completed within agreed time tables Unauthorized works are not being undertaken Attitude to other employees/contractors to be co-operative/positive and harmony to be maintained Adherence to working time and obligations to occupational health and safety act Show proper care and maintenance of hand tools and equipment and plant given by the ODC and obliged to show for the given tools and bags when inspections needed by the engineer/ in charge Responsibility for workplace activities accepted within agreed delegation and cleans the place of work before and after completion of the work Adherence to mobile use policy according to regulation at ODC Implemented the Business Ethics and Core Values of the Department are in proper manner Carrying out and controlling/Supervision of the repair work of Electric motor, lighting, cable change, Switch board cleaning etc. Prepare and study technical drawings, specifications of electrical systems to ensure that Installation and operations conform to standards and customer requirements. Carrying out and controlling/Supervision of Navigation and communication system etc. Attending on board meeting in daily basis during project period. Identify all the jobs from day one and prepare the repair plan accordingly. Troubleshoot and provide technical advice to the foremen on project, from starting to completion Of the repair works to support them in achieving their jobs. Follow up safety rules and regulations, orders by Superiors. Provide complete and accurate reports to Superior on duty May work without supervision on the night shift, if required Perform any other duties as needed to facilitate smooth operations at the discretion of Line Manager &nbsp; Quality, Health, Safety, &amp; Environment Ensure compliance to all relevant quality, health, safety and environmental management policies, procedures and controls across the department to guarantee employee safety, delivery of high quality products / services and responsible environmental attitude &nbsp; &nbsp; QUALIFICATIONS, EXPERIENCE &amp; SKILLS: Minimum Qualifications: Bachelor’s degree in electrical engineering or naval architecture or equivalent Minimum Experience: 3 - 5 years experience with minimum 3 years of experience in marine industry &nbsp; Skills Requires a good understanding of general mechanical drawing, mechanical process and sequence drawing Requires good skill in Word, Excel, Power point etc. Good communication and interpersonal skill in English is a must Exposure to ISO 9001-2000 standard<br> <br><b> Job Requirements</b><br><b> Minimum Qualification :<br></b> Bachelor Degree<br><b> Experience :<br></b> You should have Experience of Minimum 3 years to apply for this Job<br><br></div></section>

<ul><li><p>Lead daily site supervision activities and coordinate the Owner’s Engineer site team across civil, electrical, renewable energy, quality, planning, HSE interface, and document control functions.</p></li><li><p>Monitor construction works against approved drawings, specifications, inspection plans, method statements, and applicable standards.</p></li><li><p>Coordinate site interfaces between contractors, discipline engineers, project stakeholders, and relevant authorities or third parties.</p></li><li><p>Review progress, identify risks, bess</p></li><li><p>delays, interface constraints, and quality concerns, and support timely corrective actions.</p></li><li><p>Ensure site observations, technical issues, quality concerns, and progress updates are accurately captured and reported.</p></li><li><p>Support permit, regulatory, stakeholder, and interface coordination activities as required.</p></li><li><p>Act as the senior site representative for the Owner’s Engineer team and deputise for project leadership when required.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Engineering or a related technical discipline.</p></li><li><p>Minimum 15 years of experience in construction management, site supervision, or project delivery within power generation, renewable energy, infrastructure, or large EPC environments.</p></li><li><p>Prior site-based experience on utility-scale wind, solar PV, BESS, grid, substation, or similar energy infrastructure projects is preferred.</p></li><li><p>Strong understanding of construction sequencing, multidisciplinary site coordination, progress monitoring, quality surveillance, and interface management.</p></li><li><p>Excellent leadership, stakeholder management, communication, reporting, and problem-solving skills.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong> Role Summary: </strong> </p> <p>Implement QA/QC activities including those of sub-suppliers works in accordance with approved ITPs and procedures, method statements and other Contract documents. </p> <p>Prepare and sign-off applicable records for quality surveillance / inspections / tests. </p> <p>Maintain records of calibration, inspection and testing equipment. </p> <p>Ensure availability of appropriate version of applicable work documents. </p> <p>Witness qualification procedures, tests and certify the results </p> <p>Provide feed-back to Site Quality Engineer or next immediate authority in quality organization chart on the day-to-day quality issues. </p> <p> <strong> Education: </strong> </p> <p>HNC or HND or appropriate craft training and trade certificate. </p> <p>Shall possess CSWIP 3.1 / AWS for welding inspection or equivalent and certified to ASNT / PCN level II in RT, PT, MT, and UT techniques and BGAS Level 2 or NACE CIP level 2 or equivalent. </p> <p> <strong> Experience: </strong> </p> <p> <strong> (Type &amp; Length) </strong> </p> <p>Minimum 5years of inspection experience in construction industries out of which 2 years shall be gained in oil and gas facility construction.</p> <p> </p> <p> </p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for maintaining, repairing, and troubleshooting commercial kitchen equipment and carrying out basic electrical, plumbing, and HVAC maintenance to ensure smooth kitchen operations.</p><p><strong>Key Responsibilities</strong></p><ul><li>Repair and maintain kitchen equipment (ovens, fryers, refrigerators, dishwashers, coffee machines, etc.)</li><li>Perform preventive maintenance and troubleshoot equipment breakdowns.</li><li>Handle basic electrical, plumbing, and HVAC (FCU) maintenance.</li><li>Respond to breakdown calls and complete repairs promptly.</li><li>Maintain service records and follow safety and hygiene standards.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Requirements</strong></p><ul><li>Diploma/ITI in Electrical, Mechanical, or a related field.</li><li>3 5 years of experience in kitchen equipment maintenance.</li><li>Good knowledge of commercial kitchen equipment and MEP systems.</li><li>Strong troubleshooting and problem-solving skills.</li></ul><p><strong>Preferred</strong></p><ul><li>Experience in a five-star hotel, catering company, or industrial kitchen.</li></ul><p></p></section>

<p>We are seeking an experienced and highly motivated Senior Tendering Engineer to join our team in Oman. The ideal candidate will have a minimum of 10 years of experience in tendering and proposal management within the energy sector, including Oil &amp; Gas, Power Generation, Transmission &amp; Distribution, Renewable Energy, or EPC projects. The candidate will be responsible for managing the complete tendering process, ensuring competitive, compliant, and commercially sound proposals that support the company's business growth.</p><p>Key Responsibilities</p><ul><li>Lead the end-to-end tendering and bidding process from receipt of inquiry to final submission.</li><li>Review tender documents, technical specifications, commercial requirements, and contractual terms.</li><li>Coordinate with engineering, procurement, estimation, finance, legal, and project teams to prepare comprehensive technical and commercial proposals.</li><li>Develop accurate cost estimates, pricing strategies, and bid documentation.</li><li>Prepare bid clarifications and respond to client queries during the tender evaluation process.</li><li>Conduct risk assessments and identify commercial, technical, and contractual risks associated with bids.</li><li>Negotiate with suppliers and subcontractors to obtain competitive quotations.</li><li>Ensure all tender submissions comply with client requirements, company standards, and applicable regulations.</li><li>Maintain bid schedules and ensure timely submission of proposals.</li><li>Support management during contract negotiations and project handover after award.</li><li>Monitor market trends, competitor activities, and upcoming opportunities within the energy sector.</li><li>Maintain an organized repository of tender documentation and proposal templates.</li><li>Contribute to continuous improvement of tendering processes and best practices.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications</h2><p>Bachelor's Degree in Engineering (Mechanical, Electrical, Civil, Instrumentation, or equivalent). Additional qualifications in Project Management or Commercial Management are an advantage.</p><h2>Experience</h2><p>Minimum 10 years of proven experience in tendering, bid management, or proposal engineering within the Energy sector . Experience in EPC projects related to Oil &amp; Gas, Power, Utilities, Renewable Energy, or Industrial Infrastructure. Previous experience working in GCC countries, particularly Oman, is preferred.</p><h2>Required Skills</h2><ul><li>Strong knowledge of tendering procedures and contract documentation.</li><li>Excellent understanding of commercial and contractual terms (FIDIC knowledge is an advantage).</li><li>Proficiency in cost estimation, pricing, and bid preparation.</li><li>Strong analytical and problem-solving abilities.</li><li>Excellent negotiation and communication skills.</li><li>Ability to manage multiple tenders simultaneously under tight deadlines.</li><li>Strong organizational and leadership skills.</li><li>Proficiency in Microsoft Office Suite, especially Excel and Word.</li><li>Experience with ERP systems (SAP, Oracle, or similar) and estimation software is preferred.</li><li>Excellent written and spoken English. Arabic language skills are an added advantage.</li></ul><h2>Key Competencies</h2><ul><li>Strategic thinking</li><li>Commercial awareness</li><li>Attention to detail</li><li>Decision-making</li><li>Leadership and team collaboration</li><li>Time management</li><li>Client-focused approach</li><li>Ability to work under pressure</li></ul>

<p><b>1. Job Title : Asst Project Manager</b></p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 10-12 years (GCC required) Industry</p><p>Exposure: Hospital/Commercial/ Residential Projects</p><p><br></p><p>Mandatory Qualification: Bachelor's degree in relevant engineering discipline</p><p><br></p><p><br></p><p><b><br></b></p><p><b>2. Job Title : Project Engineer</b></p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 10-12 years (GCC 810 years) (Hospital/Commercial/ Residential Projects)</p><p><br></p><p><br></p><p>Mandatory Qualification: Bachelor's degree in relevant engineering discipline</p><p><br></p><p><br></p><p>3. Job Title : Civil Engineer</p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 68 years (GCC 46 years) (Hospital/Commercial/ Residential Projects;</p><p><br></p><p><br></p><p>Qualification: Bachelor's degree in Civil Engineering</p><p><br></p><p><b><br></b></p><p><b>4. Job Title : Quantity Surveyor</b></p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 810 years (GCC 56 years,)Hospital/Commercial/Residential Projects)</p><p><br></p><p><br></p><p>Qualification: Bachelor's degree in Civil Engineering</p><p><br></p><p><br></p><p><b>5. Job Title : Civil Foreman</b></p><p><br></p><p><br></p><p>Knowledge:</p><p><br></p><p><br></p><p>1. Ability to read drawings and supervise site execution.</p><p>2. Strong coordination, quality control, and manpower management skills.</p><p><br></p><p><br></p><p>Experience: 1 012 years (GCC 6 years), Hospital/Commercial/Residential Projects)</p><p><br></p><p><br></p><p>Qualification: Diploma / Bachelor in Electrical Engineering</p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p>Our client is one of the leading providers of Information and Communication Technology (ICT) to service providers currently looking for Automated Operations Engineer (1st Level Operations Telecommunication Managed Services) We are now looking for an Automated Operations Engineer within the Managed Services Ist-level Operations organization that will support the realization of solutions by providing specialized technical expertise on intelligent network systems. As an Automated Operations Engineer, you will be involved in crafting schema objects (facts, attributes, hierarchies, transformations) to develop application objects. You will also craft and create Bl reports and dashboards, write scripts and programs to automate manual work, and improve operations. This role involves maintaining, debugging, troubleshooting systems and software to ensure maximum efficiency.</p><p>Duties &amp; Responsibilities:</p><ul><li>Be responsible for real-time monitoring alarms and performance information on a 24x7 basis</li><li>Perform initial analysis to identify issues follow by restoration if possible (1st line of Support)</li><li>Perform detection, classification, correlation, and accurate escalation of network incidents according to the agreed escalation matrix.</li><li>Being able to work with a variety of tools</li><li>Be able to perform Alarm Surveillance, Trouble T-icket Management, Change Management Support for 1st Level Service Restoration Activities.</li><li>Be able to manage complaints from Customer Care.</li><li>Be able to ensure Adherence to all Processes.</li><li>Be responsible to escalate within the department / group as well as to service support units (ASP) / supplier partner functions so that service layer may be maintained at specified level.</li><li>Be able to execute Front office activities and routines according to schedules defined by Shift Team Leaders/NOC Manager.</li><li>Be able to send/receive/follow up with trouble reports sent to the delivery units/supplier/customer.</li><li>Be responsible for Remote Service Corrective, Preventive Maintenance.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Electrical Engineering / Telecommunication Engineering / Computer Science / Computer Engineering or equivalent.</li><li>Minimum 2-4 years of experience in Operation &amp; Maintenance implementation, Fault management/ performance management</li><li>Must have experience in working on UOC OSS tools</li><li>Good Multi-Vendor System knowledge</li><li>Proficient command of English is required</li><li>Experience in Performance KPls &amp; CEM KQls will be plus</li><li>Hands-on experience in automation will be advantageous</li><li>Monitoring of all alarms on RAN, Transmission, Core via NMS Nodes when required.</li></ul><p>Professional/Technical Competencies:</p><ul><li>Proficient knowledge of Access, Core, and IP/Transport Networks</li><li>Must be skilled in the network topology, its traffic handling capabilities and traffic characteristics.</li><li>Efficient knowledge of network performance/configuration parameters and their interpretation and use is critical.</li><li>Must be network service/performance focused</li><li>Adept expertise in network operation processes and interfaces</li><li>Advanced knowledge of operating network implementation/integration processes</li><li>Experience in the field of Mobile Network O&amp;M is essential</li><li>Agility and the vigor to work optimally in a fast-paced environment</li><li>The ability to direct a team and do optimum shift workload distribution</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Quality Control (QC) Engineer – Construction Excellence Specialist<br></strong><br> Are you a detail-driven engineer passionate about delivering exceptional quality in large-scale construction projects? Join a dynamic team where your expertise in quality control systems will directly impact the successful execution and handover of complex infrastructure. As a QC Engineer, you will be at the forefront of maintaining rigorous construction quality management standards, collaborating closely with site teams, subcontractors, and project leaders to ensure every deliverable meets contractual and regulatory requirements. Your role is pivotal in driving quality processes, identifying issues early, and championing continuous improvement that safeguards the integrity and safety of our projects.<br> Required Skills<ul><li>Strong knowledge and practical experience in implementing construction Quality Control (QC) management systems.</li><li>Proven ability to assist in planning, developing, and executing quality programs aligned with contract and project quality plans.</li><li>Experience reviewing and approving product/material requisitions and subcontractor quality documentation, including Quality Management Systems, quality plans, and Inspection Test Plans (ITPs).</li><li>Skilled in conducting quality inductions, monitoring inspections, and assessing contractor compliance with QC procedures.</li><li>Proficiency in data management relating to QC records, non-conformance reports (NCRs), and turnover documentation.</li><li>Excellent communication skills to promote quality awareness and deliver targeted training.</li><li>Proficient in Microsoft Office Suite.</li></ul>Nice to Have Skills<ul><li>Familiarity with international standards such as EN standards, ASME code, EN1090 (structural steel), and the Pressure Equipment Directive (PED) for piping.</li><li>Quality Auditor certification from a recognized industry body.</li><li>Experience with construction completion and turnover management processes.</li><li>Understanding of Romanian regulatory requirements (ISCIR, INSEMEX, ISU, AFER, ANRE, RENAR, ISC).</li></ul>Preferred Education and Experience<ul><li>Bachelor’s degree in Engineering or a closely related discipline.</li><li>Minimum of 5 years of hands-on experience working in quality roles within EPC (Engineering, Procurement, and Construction) contract environments.</li><li>Demonstrated background in welding engineering, supported by relevant training or internationally recognized courses.</li></ul>Other Requirements<ul><li>Ability to work collaboratively with multidisciplinary teams and subcontractors on site.</li><li>Proven organizational skills for maintaining robust QC documentation and reporting.</li><li>Willingness to engage in local management reviews and continuous improvement initiatives.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>The Senior Power System Secondary Engineer acts as the technical authority on behalf of the project developer, providing independent oversight, review, and verification of all secondary systems engineering across utility-scale renewable energy plants (Solar PV, Wind) and Battery Energy Storage Systems (BESS). The role is pivotal in ensuring that designs delivered by EPC contractors and specialist consultants are technically sound, safe, cost-effective, and fully compliant with International Best Practices, utility / TSO requirements, and applicable International Standards (IEC, IEEE/ANSI). </p><br><p>Design Review & Verification</p><ul><li><p>Lead the review and verification of all secondary design deliverables — including Single Line</p></li></ul><p>Diagrams (SLDs), Protection & Metering Diagrams (PMDs), Block Logic Diagrams (BLDs), AC/DC</p><p>schematics, and LV System Design Documents — for HV substations and renewable plants.</p><ul><li><p>Verify protection and control philosophies, including relay settings, selectivity analyses, and</p></li></ul><p>coordination studies (short-circuit calculations, CT/VT sizing) prepared by consultants and EPC</p><p>contractors.</p><ul><li><p>Review and approve interlocking schemes, bay-level logic, and station-level automation across</p></li></ul><p>switchgear, transformers, feeders, and renewable energy plant interfaces.</p><p>Substation Automation & SCADA</p><ul><li><p>Approve substation automation and SCADA architectures, ensuring correct implementation of IED</p></li></ul><p>logic, signal lists, and interlocking schemes at bay and station levels.</p><ul><li><p>Oversee the integration and configuration of communication protocols — IEC 61850</p></li></ul><p>(GOOSE/SV/MMS), IEC 60870-5-104, and DNP3 — governing data flow between Plant Power</p><p>Controllers (PPC/EMS), substations, and utility control centers.</p><ul><li><p>Review IED configurations, substation HMI displays, and historian / data management architectures</p></li></ul><p>for completeness and compliance.</p><p>Telecommunications & Cybersecurity</p><ul><li><p>Review and validate communication and telecommunication architectures, including managed</p></li></ul><p>network design (VLANs, PRP/HSR redundancy), cybersecurity policies (IEC 62351 / NERC-CIP</p><p>aligned), and tele-protection performance requirements.</p><p>Standards, Compliance & Grid Code Adherence</p><ul><li><p>Ensure strict adherence to international standards and grid codes (IEC, IEEE/ANSI) by performing</p></li></ul><p>technical audits and vetting technical submissions to Transmission / Distribution System Operators</p><p>(TSO/DSO).</p><ul><li><p>Manage technical interfaces and coordinate between EPC contractors, engineering consultants,</p></li></ul><p>OEMs, and the grid operator to ensure a coherent and optimized secondary systems design.</p><p>Testing, Commissioning & Project Governance</p><ul><li><p>Provide technical governance during critical project phases, including witnessing Factory</p></li></ul><p>Acceptance Tests (FAT) and Site Acceptance Tests (SAT), and reviewing commissioning</p><p>procedures for all secondary systems.</p><ul><li><p>Review and approve test plans, testing protocols, punch lists, and commissioning records to ensure</p></li></ul><p>safe energization of HV substations and plant systems.</p><ul><li><p>Act as the Owner’s Engineer representative in te</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education</p><ul><li><p>Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or a closely related field.</p></li><li><p>Professional Engineering registration (PE / CEng or equivalent) is an advantage.</p></li></ul><p>Experience</p><ul><li><p>8+ years of engineering experience with a demonstrable focus on substation secondary systems</p></li></ul><p>design and delivery.</p><ul><li><p>Significant experience in a developer, owner’s engineer, or utility role with direct responsibility for</p></li></ul><p>managing and challenging EPC contractor deliverables.</p><ul><li><p>Proven track record on grid-connected utility-scale renewable energy projects (Solar PV, Wind)</p></li></ul><p>and/or Battery Energy Storage Systems (BESS).</p><ul><li><p>Experience working across the full project lifecycle from FEED and detailed design through to FAT,</p></li></ul><p>SAT, and commercial operation</p>

<p>Responsible for monitoring the quality of incoming and outgoing materials, products, services for the assigned project, as well as the associated construction/production/manufacturing/installation etc process. Also responsible for conducting tests, analyzing measurements, and reporting thereof. Overall, a Quality Control Inspector, is responsible for making sure that the material/product/service meets the expected standards before being sent to the customer so as to arrest/reduce the chances of failure/non conformity.<br></p><ol><li><p>Responsible for all day to day activities and execution of all Quality Control plans for the assigned project in line with organizational and project/location specific QMS/CQP/PQP, international standards (ISO etc), client and statutory requirements</p></li><li><p>Responsible to perform various functional quality assessments & inspections on input samples (materials, products, services) and accept/reject based on specified internal/external criteria and defined procedures. Responsible to assess & inspect output samples (materials, products, services) and accept/reject based on specified internal/external criteria and defined procedures. Responsible to initiate corrective actions on non-conformities and monitor & track them to completion</p></li><li><p>Responsible to define functional inspection and test processes and document inspection outcomes by completing detailed inspection reports and performance records. Responsible to measure, track and monitor improvements to the construction/production/manufacturing/installation etc process to ensure quality control</p></li><li><p>Responsible for all individual and specific departmental productivity targets, financial objectives, KPIs and attainment thereof.<br></p></li></ol><p><strong>Other tasks:</strong></p><ol><li><p>Promoting Group Values, Code of Conduct and associated policies</p></li><li><p>Participating and providing positive contribution to technical, commercial, planning, safety and quality performance of the organization and in accordance with Client, Contractual, regulatory requirements</p></li><li><p>Undertaking any other responsibilities as directed and mutually agreed with the Line Management</p><p><br><br></p></li></ol><p><strong>Desired Candidate Profile</strong></p><p>Responsible for execution of Quality inspections as per SP 1171, Contract quality control plans and inspection test packs. He/she shall report to the relevant area Quality Engineer.<br></p><p><strong>Educational Qualifications</strong></p><br><ul><li><p>Bachelor’s degree in Mechanical Engineering</p><br></li><li><p><strong><u>GRP, GRE, GRV, HDPE, LLRTP, PVDF, PPFRP, PEFRP, PVCFRP, CPVC, UPVC (nonmetallic)</u></strong><br></p></li></ul><p><strong>Professional Certifications</strong></p><ul><li><p>A proven work experience as a <strong><em><u>GRE QCI ( Specially High Presser lines)</u></em></strong></p></li></ul><ul><li><p>Welding Inspection Qualification (CSWIP 3.1 or AWS- CWI) or equivalent</p></li><li><p>ASNT Level 2 or equivalent in UT, RT, PT, MT.</p></li><li><p>Certification in Quality Management Systems, Six Sigma, ISO, Total Quality Management or equivalent (preferred)</p></li><li><br></li></ul><p><strong>Skills</strong></p><ul><li><p>A proven work experience as a Welding QCI / GRE - GRV, HDPE, LLRTP, PVDF, PPFRP, PEFRP, PVCFRP, CPVC, UPVC (nonmetallic)</p></li><li><p>Familiarity with latest quality-oriented trends in the industry. Knowledge of best practices</p></li><li><p>Strong writing and record keeping abilities. Strong IT skills. Strong communication, planning, organizing and leadership skills.</p></li></ul><p><br></p><p><u>Key details of the position:</u></p><ul><li><p>Site-based job&nbsp;<strong>without family status</strong></p></li><li><p><strong>Food, accommodation and transportation</strong>&nbsp;will be provided by the company</p></li><li><p>Mandatory -&nbsp;<strong><em><u>Oil & Gas Experience</u></em></strong></p></li><li><p><strong>Leave cycle:</strong>&nbsp;6 months followed by 14 days of paid leave&nbsp;( Client approved Candidates/position only)</p></li></ul><p><br><br></p>

<p>Responsible for monitoring the quality of incoming and outgoing materials, products, services for the assigned project, as well as the associated construction/production/manufacturing/installation etc process. Also responsible for conducting tests, analyzing measurements, and reporting thereof. Overall, a Quality Control Inspector, is responsible for making sure that the material/product/service meets the expected standards before being sent to the customer so as to arrest/reduce the chances of failure/non conformity.<br></p><ol><li><p>Responsible for all day to day activities and execution of all Quality Control plans for the assigned project in line with organizational and project/location specific QMS/CQP/PQP, international standards (ISO etc), client and statutory requirements</p></li><li><p>Responsible to perform various functional quality assessments & inspections on input samples (materials, products, services) and accept/reject based on specified internal/external criteria and defined procedures. Responsible to assess & inspect output samples (materials, products, services) and accept/reject based on specified internal/external criteria and defined procedures. Responsible to initiate corrective actions on non-conformities and monitor & track them to completion</p></li><li><p>Responsible to define functional inspection and test processes and document inspection outcomes by completing detailed inspection reports and performance records. Responsible to measure, track and monitor improvements to the construction/production/manufacturing/installation etc process to ensure quality control</p></li><li><p>Responsible for all individual and specific departmental productivity targets, financial objectives, KPIs and attainment thereof.<br></p></li></ol><p><strong>Other tasks:</strong></p><ol><li><p>Promoting Group Values, Code of Conduct and associated policies</p></li><li><p>Participating and providing positive contribution to technical, commercial, planning, safety and quality performance of the organization and in accordance with Client, Contractual, regulatory requirements</p></li><li><p>Undertaking any other responsibilities as directed and mutually agreed with the Line Management</p><p><br><br></p></li></ol><p><strong>Desired Candidate Profile</strong></p><p>Responsible for execution of Quality inspections as per SP 1171, Contract quality control plans and inspection test packs. He/she shall report to the relevant area Quality Engineer.<br></p><p><strong>Educational Qualifications</strong></p><ul><li><p>Bachelor’s degree in Mechanical Engineering<br></p></li></ul><p><strong>Professional Certifications</strong></p><ul><li><p>Welding Inspection Qualification (CSWIP 3.1 or AWS- CWI) or equivalent</p></li><li><p>ASNT Level 2 or equivalent in UT, RT, PT, MT.</p></li><li><p>Certification in Quality Management Systems, Six Sigma, ISO, Total Quality Management or equivalent (preferred)</p></li><li><p>B_Gas Certification.</p></li></ul><p><strong>Skills</strong></p><ul><li><p>A proven work experience as a Welding QCI</p></li><li><p>Familiarity with latest quality-oriented trends in the industry. Knowledge of best practices</p></li><li><p>Strong writing and record keeping abilities. Strong IT skills. Strong communication, planning, organizing and leadership skills.</p></li></ul><p><br></p><p><u>Key details of the position:</u></p><ul><li><p>Site-based job&nbsp;<strong>without family status</strong></p></li><li><p><strong>Food, accommodation and transportation</strong>&nbsp;will be provided by the company</p></li><li><p>Mandatory -&nbsp;<strong><em><u>Oil & Gas Experience & The role requires significant experience in pipelines, Cross Country Pipelines and flowlines and is offered on a long-term basis employment.</u></em></strong></p></li><li><p><strong>Leave cycle:</strong>&nbsp;6 months followed by 14 days of paid leave&nbsp;(Client approved Candidates/position only)</p></li></ul><p><br><br></p>

<ul><li><p>To manage multi-discipline projects from the initiation till the close-out, within schedule and cost to an acceptable quality.</p></li><li><p>Shall have worked as a single-point responsible project engineer for a medium size oil/gas project or managing multiple smaller projects concurrently. </p></li><li><p>Shall have proven capabilities in managing and motivating all disciplines to deliver projects.</p></li><li><p>Shall demonstrate sound general management skills in all aspects of the work, be extremely well organised, methodical</p></li><li><p>Single point responsible for the efficient execution of assigned projects to deliver within schedule, cost and at an acceptable quality. </p></li><li><p>Develop scope of work handed over by the Company project engineer for each project to achieve the specified deliverables. </p></li><li><p>Develop cost and schedule control estimates and project key control documentation.</p></li><li><p>Responsible for management of all project reporting, interface definition, interface management, liaison with Company project engineers, maintain and control project variance logs, project audit reports, managing close-out of audit action items, early highlight and resolution of project issues.</p></li><li><p>Exercising control over manpower and material resources in order to execute the project within budget, schedule, quality and HSE requirements. </p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Degree in a relevant engineering discipline -<strong><u> Preferable Mech.</u></strong></p><p>membership of internationally accepted applicable professional Institute. i.e PMP</p><p>Must be PC literate & Good communication skills</p><p>Hands on experience on planning software tools such as <strong><em>PRIMAVERA or equivalent.</em></strong></p><p>Experience in project management of sour facilities</p><p>Good interpersonal & communication skills and an extrovert.</p><p>Shall be able to form, smoothly interact and motivate a team within a matrix type organisation</p><p>Promote a planning execute - measure – feedback work loop method in project engineering.</p><p><br></p>

<p>Diagnose and Repair Engine, Transmission, Suspension, and Brake System Issues. Perform Routine Vehicle Maintenance and Inspections. Replace Defective Parts and Ensure Vehicles are Safe for Operation. Use Diagnostic Tools and Follow Workshop Safety Procedures. Repair Damaged Vehicle Body Panels and Frames. Remove Dents Using Appropriate Repair Techniques. Replace Damaged Body Parts When Necessary. Prepare Vehicle Surfaces for Painting.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Experience 1 - 5 Years</li><li>Qualification 10th Pass</li><li>Key Skills: Car Technician, Car Manufacturing, Car Sales, Car Denter, Car Washer, Car Mechanic, Car Driver, Car Sales Executive, Motor Mechanic</li></ul>

<p>Do you like working in collaborative teams and solving critical issues? Do you enjoy being part of a successful team? Join our Team! We are the leader in well construction and production. Our innovative physical and digital solutions improve efficiency, production and maximize reservoir value. Our Pressure Pumping team are expertise in Cementing, Coil Tubing &amp; Stimulation. Partner with the best The Technical support Engineer ensures Baker Hughes deliver flawless execution by providing Technical Support to the Service Delivery organization and Sales organization when needed in pre-planning, job execution, and post job analysis. As a Technical Support Engineer Cementing, you will be responsible for:</p><ul><li>Ensuring compliance with Manage the Job Cycle (MtJC) process</li><li>Being Subject Matter Expert for their area of support</li><li>Providing Support the field technically through different media ( online , phone calls and technical papers)</li><li>Providing 24/7 Support for Critical Operations in the field when needed</li><li>Sharing the knowledge across the organization by submitting best practices, case histories &amp; lessons learned to the knowledge management database</li><li>Following up on field failures that requires Technology involvement and ensure that the learning is shared across the field</li><li>Raising an alert across the Service Delivery organization whenever an unfamiliar technical issues arises on a job</li><li>Coaching other technical resources in their area of expertise</li><li>Communicating to Engineering and Technology organization on issues and lessons learned related to different technologies performing PL specific responsibilities</li><li>Handling special projects as required</li></ul><p>Fuel your passion To be successful in this role you will:</p><p>Work in a way that works for you We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. Working with us Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other. Working for you Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p><ul><li>Contemporary work-life balance policies and wellbeing activities</li><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li>Tailored financial programs</li><li>Additional elected or voluntary benefits'</li></ul><p><strong>Desired Candidate Profile</strong></p>Have a bachelor degree in Engineer (Masters degree is preferred) Have 15+ years of experience in cementing Have experience in CemFacts, cemvision, IsoVision for 10+ years Have experience in Foam cementing system for 10+ years Have a strong analytical and problem-solving skills. Have the ability to develop and mentor small technical teams. Have thorough understanding of P/L technology &amp; service delivery requirements. Be able to work in a 24/7 service environment, based on an agreed shift schedule. Have good communication skills both verbal and written in English.