Heavy equipment mechanical engineer Jobs

<p>Act as technical authority for WTG erection activities. Supervise unloading, storage,</p><p>preservation, assembly and installation of turbine components. Coordinate crane</p><p>operations and heavy lifts for tower sections, nacelles, hubs and blades. Ensure</p><p>compliance with OEM procedures, quality requirements and HSE standards. Manage</p><p>subcontractors and interfaces with civil, electrical and commissioning teams. Support</p><p>mechanical completion, punch-list clearance and handover.</p><ol><li><p>Minimum Experience Requirements</p></li></ol><p>Minimum 8-10 years in industrial construction. Minimum 8 years dedicated to wind</p><p>turbine erection projects. Proven experience on wind farms above 300 MW.</p><p>Demonstrated involvement from construction through commissioning and COD.</p><p>Experience with international EPC contractors and OEM turbine suppliers.</p><ol><li><p>Preferred OEM Experience</p></li></ol><p>Candidates with hands-on experience in Vestas, Siemens Gamesa, GE Vernova,</p><p>Nordex, Enercon, Goldwind or Sany technologies shall be prioritized.</p><ol><li><p>Technical Competencies</p></li></ol><p>WTG erection methodology; tower installation; nacelle installation; blade mounting; bolt</p><p>tensioning; hydraulic torque equipment; alignment and leveling; lifting studies; heavy</p><p>crane operations; turbine preservation; mechanical inspections; quality dossiers; turbine</p><p>commissioning support; punch-list management; defect identification and rectification;</p><p>work packaging and construction sequencing.</p><ol><li><p>Construction and Project Management</p></li></ol><p>Management of subcontractors, daily progress monitoring, look-ahead planning,</p><p>resource allocation, productivity tracking, interface management, schedule recovery</p><p>actions, risk management and reporting to project management teams.</p><ol><li><p>HSE Requirements</p></li></ol><p>Strong leadership in lifting operations, work at height, rescue plans, permit to work</p><p>systems, lock-out tag-out procedures, risk assessments, toolbox talks and zero-harm</p><p>safety culture. Candidate must demonstrate a proactive safety leadership record.</p><ol><li><p>Qualifications</p></li></ol><p>Bachelor Degree in Mechanical Engineering or related discipline. English proficiency</p><p>B2/C1. Ability to work in remote locations and rotational assignments. Wind industry</p><p>certifications and GWO training are highly desirable.</p><ol><li><p>Geographic Experience</p></li></ol><p>Experience in international utility-scale wind projects is preferred. Middle East, Europe,</p><p>Latin America, Asia-Pacific and Africa wind farm experience will be considered</p><p>advantageous.</p><p><strong>Desired Candidate Profile</strong></p><p>This document defines the minimum and preferred recruitment requirements for hiring a Senior Wind Turbine Erection Engineer responsible for planning, supervision, erection, installation, quality control, mechanical completion and commissioning support of utility scale wind turbine generators (WTG). The role is intended for , Owners Engineers and Owner Representatives involved in onshore and offshore wind projects.</p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Drawings &amp; Designs is responsible for the development, management, control, and continuous improvement of all engineering drawings, technical documentation, plant design records, and engineering change processes across the mining and processing operations. The role ensures that all engineering drawings, as-built documentation, layouts, schematics, and design data are accurate, current, compliant with applicable engineering standards, and readily available to support safe, reliable, and efficient operation of plant assets. The position provides technical leadership for engineering design activities, drawing management systems, plant modifications, engineering change management (MOC), document control coordination, multidisciplinary design reviews, and digital engineering initiatives. The role supports maintenance, operations, projects, shutdowns, and capital development activities by ensuring engineering documentation integrity and effective design governance throughout the asset lifecycle.</p> <p> </p> <p><b>Detailed Description </b></p> <p>DRAWINGS AND DESIGN MANAGEMENT</p> <p>Develop, review, and manage engineering drawings including mechanical, structural, piping, electrical, instrumentation, civil, architectural, and process drawings.</p> <p>Ensure all engineering drawings are maintained accurately and updated to reflect plant modifications and as-built conditions.</p> <p>Establish and maintain engineering drawing standards, drafting procedures, templates, and design guidelines.</p> <p>Ensure consistency and compliance with applicable international standards, company requirements, and OEM specifications.</p> <p>Coordinate multidisciplinary drawing reviews and approvals prior to implementation of modifications.</p> <p>Maintain master drawing registers and document history records.</p> <p>Ensure obsolete drawings are withdrawn and controlled in accordance with document management procedures.</p> <p>Support digitalization initiatives involving engineering document management and drawing systems.</p> <p>ENGINEERING DESIGN AND MODIFICATIONS</p> <p>Lead and coordinate engineering design activities for plant upgrades, asset improvement initiatives, debottlenecking projects, and operational modifications.</p> <p>Prepare conceptual, basic, and detailed engineering designs.</p> <p>Develop engineering calculations, technical specifications, scopes of work, and equipment layouts.</p> <p>Conduct feasibility studies and technical evaluations for proposed modifications.</p> <p>Ensure designs achieve required safety, operability, maintainability, reliability, and cost objectives.</p> <p>Coordinate engineering deliverables with Operations, Maintenance, Reliability, Projects, and external consultants.</p> <p>Participate in design verification and interdisciplinary design reviews.</p> <p>Ensure engineering designs consider lifecycle cost optimization and long-term asset sustainability.</p> <p>MANAGEMENT OF CHANGE (MOC)</p> <p>Manage engineering aspects of the Management of Change process.</p> <p>Review and evaluate proposed modifications and technical changes.</p> <p>Ensure all design changes are supported by appropriate engineering documentation and risk assessments.</p> <p>Coordinate updating of drawings, technical documents, procedures, and asset records following approved changes.</p> <p>Verify implementation of approved modifications and completion of as-built documentation.</p> <p>Ensure engineering changes comply with statutory, safety, environmental, and operational requirements.</p> <p>ENGINEERING DOCUMENT CONTROL</p> <p>Maintain engineering document control systems and technical databases.</p> <p>Ensure proper filing, numbering, distribution, revision control, and archiving engineering documents.</p> <p>Manage controlled copies of plant drawings and technical records.</p> <p>Coordinate document reviews and approvals with engineering disciplines and stakeholders.</p> <p>Ensure document accessibility for maintenance, operations, projects, and regulatory requirements.</p> <p>Support audits by ensuring engineering records and documentation are accurate and available.</p> <p>PLANT LAYOUTS AND AS-BUILT MANAGEMENT</p> <p>Develop and maintain plant general arrangement drawings, equipment layouts, utility plans, and site infrastructure drawings.</p> <p>Coordinate field verification activities to ensure drawing accuracy.</p> <p>Conduct plant surveys and document existing conditions where required.</p> <p>Ensure timely preparation and updating of as-built drawings following project completion.</p> <p>Establish processes for maintaining plant configuration integrity.</p> <p>Support operational and maintenance teams through provision of accurate plant data and layouts.</p> <p>PROJECTS AND CAPITAL DEVELOPMENT SUPPORT</p> <p>Support capital projects through engineering design development and drawing preparation.</p> <p>Review consultant and contractor engineering deliverables.</p> <p>Participate in project scope development, technical reviews, and constructability assessments.</p> <p>Ensure project designs integrate effectively with existing facilities.</p> <p>Coordinate engineering deliverables during project execution and commissioning activities.</p> <p>Support handover processes and verification of final project documentation.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor s degree in mechanical engineering/production engineering or CAD/CAM engineering or equivalent</p> <p><b>Experience: </b></p> <p> Bachelor s degree with 15+ years experience in designs and drafting mechanical structures and mechanical equipment in mining, minerals processing, or heavy industrial operations.</p> <p> Experience in CAD/CAM, SolidWorks or equivalent design software</p> <p> Minimum 5 years in a senior engineering, design coordination, or technical authority role.</p> <p>Certifications: Candidate must have followed certification</p> <p> Certified AutoCAD Professional or equivalent CAD Design Certification.</p> <p>Following certifications added advantage</p> <p> Certified Asset Management Assessor (CAMA).</p> <p> Certified Maintenance and Reliability Professional (CMRP).</p> <p> Lean Six Sigma Green Belt or Black Belt.</p> <p> Autodesk Certified Professional (ACP) or equivalent advanced CAD certification.</p> <p><br></p>

<p>Brief Posting Description </p> <p>The Senior Engineer Reliability &amp; Performance is responsible for developing, implementing, and continuously improving reliability engineering, asset performance, maintenance optimization, and continuous improvement programs across mining, mineral processing, utilities, and infrastructure assets. The role ensures optimal equipment reliability, availability, maintainability, and operational performance through the application of reliability engineering principles, asset management practices, performance analytics, and data-driven decision-making.</p> <p>The position provides technical leadership in Reliability-Centered Maintenance (RCM), Root Cause Failure Analysis (RCFA), Failure Modes and Effects Analysis (FMEA), asset criticality assessment, maintenance strategy optimization, equipment performance monitoring, and reliability improvement initiatives. The role supports Operations, Maintenance, Inspection, and Projects teams by driving sustainable reliability improvements, maximizing asset value, reducing lifecycle costs, and enhancing overall business performance.</p> <p>Detailed Description </p> <p>RELIABILITY ENGINEERING &amp; STRATEGY MANAGEMENT</p> <p>Develop and continuously improve site reliability engineering programs and methodologies.</p> <p>Establish reliability strategies for fixed plant, mobile equipment, utilities, and infrastructure assets.</p> <p>Lead asset reliability improvement initiatives to improve equipment availability and operational performance.</p> <p>Develop reliability standards, procedures, and best practices.</p> <p>Facilitate reliability reviews and equipment performance assessments.</p> <p>Support long-term asset management and lifecycle planning activities.</p> <p>Ensure reliability objectives align with business and operational requirements.</p> <p>ASSET PERFORMANCE MANAGEMENT</p> <p>Monitor and analyze asset performance, equipment utilization, and operational efficiency.</p> <p>Develop asset performance indicators and equipment health indices.</p> <p>Identify performance gaps, bottlenecks, and reliability constraints affecting production.</p> <p>Conduct performance benchmarking and improvement studies.</p> <p>Support initiatives to improve plant throughput, asset utilization, and operating effectiveness.</p> <p>Drive operational excellence through performance analysis and continuous improvement methodologies.</p> <p>Establish performance improvement roadmaps for critical assets.</p> <p>RELIABILITY-CENTERED MAINTENANCE (RCM)</p> <p>Lead Reliability-Centered Maintenance studies for critical assets.</p> <p>Review and optimize maintenance strategies based on equipment criticality and risk.</p> <p>Develop maintenance task plans and reliability improvement recommendations.</p> <p>Optimize preventive, predictive, condition-based, and corrective maintenance programs.</p> <p>Ensure maintenance strategies support reliability and business objectives.</p> <p>Participate in maintenance program reviews and audits.</p> <p>FAILURE ANALYSIS &amp; DEFECT ELIMINATION</p> <p>Lead Root Cause Failure Analysis (RCFA) investigations for significant equipment failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Analyze recurring failures and reliability issues.</p> <p>Identify bad actors and develop corrective action plans.</p> <p>Monitor implementation and effectiveness of reliability improvement actions.</p> <p>Promote defect elimination methodologies throughout maintenance and operations teams.</p> <p>Capture lessons learned and implement sustainable solutions.</p> <p>ASSET CRITICALITY &amp; RISK MANAGEMENT</p> <p>Lead asset criticality assessments across all plant and infrastructure assets.</p> <p>Develop and maintain asset criticality rankings and risk profiles.</p> <p>Support risk-based maintenance and reliability decision-making processes.</p> <p>Evaluate operational, safety, environmental, and financial risks associated with asset failures.</p> <p>Participate in HAZID, HAZOP, risk assessments, and reliability reviews.</p> <p>Support business continuity and risk mitigation initiatives.</p> <p>MAINTENANCE OPTIMIZATION</p> <p>Analyze maintenance effectiveness and identify improvement opportunities.</p> <p>Optimize preventive maintenance frequencies and task content.</p> <p>Support development of predictive and condition-based maintenance programs.</p> <p>Evaluate work management performance and maintenance execution effectiveness.</p> <p>Improve maintenance productivity through data analytics and best practice implementation.</p> <p>Support spare parts optimization and critical equipment strategies.</p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor s degree in mechanical engineering, Electrical Engineering, Reliability Engineering, Industrial Engineering, Asset Management, or equivalent discipline.</p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years or Higher Diploma with 15+ years of experience in reliability engineering, asset management, maintenance optimization, and performance improvement within mining, minerals processing, oil &amp; gas, petrochemical, power generation, or heavy industrial operations.</p> <p> Minimum 5 years in senior reliability, asset management, maintenance excellence, or performance improvement role.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirable.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP).</p> <p> Certified Reliability Engineer (CRE).</p> <p> Asset Reliability Practitioner (ARP-E, ARP-L, or ARP-A).</p> <p> Certified Asset Management Assessor (CAMA).</p> <p> IAM Certificate or Diploma in Asset Management.</p> <p> Reliability Centered Maintenance (RCM) Practitioner Certification</p> <p> Root Cause Analysis (RCA) / Root Cause Failure Analysis (RCFA) Certification.</p> <p> ISO 55001 Asset Management Lead Implementer or Lead Auditor.</p> <p> Lean Six Sigma Green Belt or Black Belt.</p> <p> Project Management Professional (PMP).</p> <p> SAP PM Certification.</p> <p> Power BI Data Analytics Certification.</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Workshop, Cranes and Tools Room is responsible for the safe, reliable, and cost-effective management of the site maintenance workshop, lifting equipment, cranes, rigging gear, welding facilities, machine shop activities, and tools room operations. The role ensures that all workshop services, lifting equipment inspections, repair activities, fabrication works, and tool management processes support maintenance and operational objectives while complying with company safety, quality, and statutory requirements.The position provides technical leadership for workshop personnel, crane and lifting equipment compliance, specialized maintenance support services, contractor coordination, resource planning, and continuous improvement initiatives to maximize equipment availability, operational efficiency, and asset integrity throughout the operation.</p> <p>Detailed Description </p> <p><b>WORKSHOP MANAGEMENT</b></p> <p>Lead and manage all workshop activities including mechanical repairs, fabrication, machining, welding, equipment refurbishment, and overhaul works.</p> <p>Ensure workshop resources, manpower, facilities, and equipment are effectively utilized to support maintenance requirements.</p> <p>Develop and implement workshop operating procedures, work standards, and best practices.</p> <p>Coordinate repair priorities with Maintenance Planning, Operations, and Reliability teams.</p> <p>Monitor workshop productivity, work quality, turnaround times, and resource utilization.</p> <p>Ensure workshop equipment is maintained, calibrated, and fit for purpose.</p> <p>Identify and implement continuous improvement opportunities to enhance workshop performance and efficiency.</p> <p>CRANES, LIFTING EQUIPMENT AND RIGGING MANAGEMENT</p> <p>Manage inspection, testing, certification, maintenance, and compliance of all cranes, hoists, lifting equipment, lifting accessories, and rigging gear.</p> <p>Ensure all lifting equipment complies with company standards, OEM requirements, and regulatory requirements.</p> <p>Coordinate third-party inspections, load testing, and certification activities.</p> <p>Maintain lifting equipment registers, inspection records, and certification documentation.</p> <p>Review and approve lifting plans and critical lift requirements as required.</p> <p>Investigate lifting equipment failures and implement corrective actions.</p> <p>Provide technical guidance and support for lifting operations across the site.</p> <p>TOOLS ROOM MANAGEMENT</p> <p>Manage the operation of the tools room and ensure availability of specialized maintenance tools and equipment.</p> <p>Establish and maintain tool inventory management systems.</p> <p>Ensure proper control, storage, calibration, inspection, and maintenance of tools and equipment.</p> <p>Monitor tool utilization and implement measures to minimize loss and damage.</p> <p>Coordinate procurement and replacement of tools and workshop consumables.</p> <p>Maintain accurate inventory records within SAP or approved systems.</p> <p>MAINTENANCE EXECUTION SUPPORT</p> <p>Provide workshop support for planned maintenance, breakdown maintenance, shutdowns, and major projects.</p> <p>Coordinate refurbishment and repair activities for mechanical components and assemblies.</p> <p>Support field maintenance teams with technical solutions and workshop services.</p> <p>Ensure maintenance work is completed safely, efficiently, and according to quality standards.</p> <p>Facilitate rapid turnaround of critical repairs to minimize operational downtime.</p> <p>SHUTDOWN AND PROJECT SUPPORT</p> <p>Support maintenance shutdowns and major projects through workshop services, fabrication activities, and lifting equipment readiness.</p> <p>Coordinate manpower, tools, lifting equipment, and contractor support during shutdowns.</p> <p>Ensure workshop and crane resources are available to meet shutdown schedules.</p> <p>Participate in shutdown planning, execution reviews, and lessons learned activities.</p> <p>CONTRACTOR AND SERVICE PROVIDER MANAGEMENT</p> <p>Manage workshop-related contractors and service providers.</p> <p>Monitor contractor performance, safety compliance, and quality of work.</p> <p>Review scopes of work, quotations, and technical proposals.</p> <p>Verify completed work and approve contractor service reports where applicable.</p> <p>Ensure contractor activities comply with company and site requirements.</p> <p>PERFORMANCE MONITORING AND REPORTING</p> <p>Develop and maintain KPIs for workshop, cranes, lifting equipment, and tools room performance.</p> <p>Monitor and report:</p> <p>Workshop Productivity</p> <p>Equipment Repair Turnaround Time</p> <p>Crane and Lifting Equipment Availability</p> <p>Inspection and Certification Compliance</p> <p>Tool Utilization and Inventory Accuracy</p> <p>Safety Performance</p> <p>Maintenance Cost Performance</p> <p><br></p> <p><b>Job Requirements </b></p> <p><b>Education:</b></p> <p> Bachelor s degree or Higher Diploma</p> <p><b>Experience:</b></p> <p> Bachelor s degree with 10+ years or Higher Diploma with 15+ years of experience in workshop operations, cranes maintenance in mining, minerals processing, or heavy industrial operations.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirable</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Six-sigma (BB)</p> <p>T</p> <p> Strong coordination and resource management skills, particularly during shutdowns and critical maintenance activities.</p> <p> Ability to make sound technical and operational decisions under pressure.</p> <p> Strong safety leadership and commitment to fostering a proactive safety culture.</p> <p> Excellent negotiation and contractor management skills.</p> <p> High level of accountability, integrity, and professional ethics.</p> <p> Strong attention to detail and commitment to quality and compliance standards.</p> <p> Effective conflict resolution and stakeholder influencing skills.</p> <p> Ability to manage multiple priorities and deliver results within deadlines.</p> <p> Strong collaboration skills with the ability to work effectively across all organizational levels.</p> <p> Adaptability and resilience in managing changing operational requirements and business priorities.</p> <p> Continuous improvement mindset with a focus on operational excellence, reliability, and cost optimization.</p> <p> Strong presentation, report-writing, and technical documentation skills.</p> <p> Ability to work effectively in a multicultural environment and build productive working relationships with internal and external stakeholders.</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Engineer Inspection &amp; Condition Monitoring is supporting in developing, implementing, and continuously improving the condition monitoring, predictive maintenance, asset inspection, and integrity management programs across mining, processing, utilities, and infrastructure assets. The role ensures that equipment health is effectively monitored using predictive technologies and inspection methodologies to identify potential failures, optimize maintenance strategies, improve equipment reliability, and maximize asset availability.</p> <p>The position provides support to technical leadership in vibration analysis, thermography, lubrication analysis, ultrasound testing, nondestructive testing (NDT), asset integrity management, reliability improvement initiatives, and risk-based inspection programs. The role supports maintenance, reliability, operations, and project teams through data-driven decision-making, equipment condition assessment, failure prevention, and continuous improvement programs to achieve world-class asset performance and operational excellence.</p> <p>Detailed Description </p> <p>CONDITION MONITORING PROGRAM MANAGEMENT</p> <p>Support in developing, implementing, and continuously improving the site-wide condition monitoring program.</p> <p>Support in establishing predictive maintenance strategies for critical plant and mobile equipment.</p> <p>Support in developing equipment monitoring routes, inspection plans, and asset health assessment methodologies.</p> <p>Ensure effective utilization of condition monitoring technologies to detect early-stage equipment deterioration.</p> <p>Review asset condition data and provide recommendations to prevent equipment failures.</p> <p>Establish inspection frequencies, alarm limits, and monitoring standards.</p> <p>Ensure condition monitoring activities are aligned with reliability and asset management objectives.</p> <p>Support digitalization initiatives relating to equipment health monitoring and predictive analytics.</p> <p>VIBRATION ANALYSIS &amp; MACHINERY DIAGNOTICS</p> <p>Perform vibration monitoring and analysis activities for rotating equipment.</p> <p>Conduct advanced vibration diagnostics and fault identification.</p> <p>Identify bearing defects, misalignment, imbalance, looseness, resonance, gear defects, and mechanical degradation.</p> <p>Establish vibration baselines and equipment health indices.</p> <p>Develop corrective action recommendations based on vibration analysis findings.</p> <p>Provide technical guidance to maintenance teams regarding equipment condition and required interventions.</p> <p>Monitor effectiveness of corrective actions and maintenance outcomes.</p> <p>THERMOGRAPHY AND INFRARED INSPECTION</p> <p>Execute and manage infrared thermography inspection programs.</p> <p>Conduct thermal condition assessments of electrical, mechanical, and process equipment.</p> <p>Identify abnormal temperature conditions and potential equipment failures.</p> <p>Verify corrective actions through follow-up thermal inspections.</p> <p>Maintain thermal imaging databases and inspection records.</p> <p>Develop thermography inspection standards and reporting requirements.</p> <p>LUBRICATION AND OIL ANALYSIS MANAGEMENT</p> <p>Execute lubrication excellence and oil analysis programs.</p> <p>Monitor lubricant condition, contamination levels, wear metals, and fluid degradation.</p> <p>Establish oil sampling schedules and testing requirements.</p> <p>Analyze laboratory reports and recommend corrective maintenance actions.</p> <p>Optimize lubrication practices and lubricant selection strategies.</p> <p>Support contamination control and machine health improvement initiatives.</p> <p>ULTRASOUND AND ADVANCED PREDICTIVE TECHNOLOGIES</p> <p>Manage ultrasound inspection activities for mechanical, electrical, and process systems.</p> <p>Conduct inspections for compressed air leaks, steam leaks, bearing defects, and electrical discharge.</p> <p>Evaluate and implement advanced predictive maintenance technologies where applicable.</p> <p>Support development of asset health monitoring systems and online condition monitoring solutions.</p> <p>Identify opportunities to improve predictive maintenance effectiveness.</p> <p>INSPECTION &amp; ASSET INTEGRITY MANAGEMENT</p> <p>Support in developing inspection strategies and risk-based inspection programs for fixed and rotating assets.</p> <p>Ensure inspection activities comply with applicable engineering standards, statutory requirements, and company procedures.</p> <p>Coordinate internal and external inspection activities.</p> <p>Develop statutory inspection programs for pressure vessels, tanks, pipelines, lifting equipment, and critical structures.</p> <p>Coordinate thickness monitoring and corrosion management programs.</p> <p>Manage inspection intervals and equipment integrity risk assessments.</p> <p>Ensure compliance with API, ASME, ISO, and applicable regulatory inspection requirements.</p> <p>Support Fitness-for-Service (FFS) assessments and equipment life extension studies</p> <p>Review inspection findings and assess equipment fitness for service.</p> <p>Monitor asset degradation mechanisms and recommend mitigation actions.</p> <p>Support asset integrity assessments and life extension studies.</p> <p>Maintain inspection records, reports, and regulatory compliance documentation.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education:</p> <p> Bachelor s degree in mechanical engineering, Electrical Engineering, Reliability Engineering, Asset Management, Industrial Engineering, or equivalent discipline.</p> <p><b>Experience:</b></p> <p> Bachelor s Degree with 5+ years or Higher Diploma with 10+ years of experience in condition monitoring, inspection, reliability engineering, asset integrity, and predictive maintenance within mining, minerals processing, oil &amp; gas, petrochemical, power generation, or heavy industrial operations.</p> <p>Certifications: Mandatory: Vibration Analysis Certification (ISO CAT II minimum).</p> <p>Added Advantage:</p> <p> ISO CAT III or IV Vibration Analyst,</p> <p> ISO 18436 Condition Monitoring Certifications,</p> <p> Infrared Thermography Certification Level I/II,</p> <p> Ultrasound Certification Level I/II,</p> <p> ASNT NDT Level II/III,</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Engineer Inspection &amp; Condition Monitoring is supporting in developing, implementing, and continuously improving the condition monitoring, predictive maintenance, asset inspection, and integrity management programs across mining, processing, utilities, and infrastructure assets. The role ensures that equipment health is effectively monitored using predictive technologies and inspection methodologies to identify potential failures, optimize maintenance strategies, improve equipment reliability, and maximize asset availability.</p> <p>The position provides support to technical leadership in vibration analysis, thermography, lubrication analysis, ultrasound testing, nondestructive testing (NDT), asset integrity management, reliability improvement initiatives, and risk-based inspection programs. The role supports maintenance, reliability, operations, and project teams through data-driven decision-making, equipment condition assessment, failure prevention, and continuous improvement programs to achieve world-class asset performance and operational excellence.</p> <p>Detailed Description </p> <p>CONDITION MONITORING PROGRAM MANAGEMENT</p> <p>Support in developing, implementing, and continuously improving the site-wide condition monitoring program.</p> <p>Support in establishing predictive maintenance strategies for critical plant and mobile equipment.</p> <p>Support in developing equipment monitoring routes, inspection plans, and asset health assessment methodologies.</p> <p>Ensure effective utilization of condition monitoring technologies to detect early-stage equipment deterioration.</p> <p>Review asset condition data and provide recommendations to prevent equipment failures.</p> <p>Establish inspection frequencies, alarm limits, and monitoring standards.</p> <p>Ensure condition monitoring activities are aligned with reliability and asset management objectives.</p> <p>Support digitalization initiatives relating to equipment health monitoring and predictive analytics.</p> <p>VIBRATION ANALYSIS &amp; MACHINERY DIAGNOTICS</p> <p>Perform vibration monitoring and analysis activities for rotating equipment.</p> <p>Conduct advanced vibration diagnostics and fault identification.</p> <p>Identify bearing defects, misalignment, imbalance, looseness, resonance, gear defects, and mechanical degradation.</p> <p>Establish vibration baselines and equipment health indices.</p> <p>Develop corrective action recommendations based on vibration analysis findings.</p> <p>Provide technical guidance to maintenance teams regarding equipment condition and required interventions.</p> <p>Monitor effectiveness of corrective actions and maintenance outcomes.</p> <p>THERMOGRAPHY AND INFRARED INSPECTION</p> <p>Execute and manage infrared thermography inspection programs.</p> <p>Conduct thermal condition assessments of electrical, mechanical, and process equipment.</p> <p>Identify abnormal temperature conditions and potential equipment failures.</p> <p>Verify corrective actions through follow-up thermal inspections.</p> <p>Maintain thermal imaging databases and inspection records.</p> <p>Develop thermography inspection standards and reporting requirements.</p> <p>LUBRICATION AND OIL ANALYSIS MANAGEMENT</p> <p>Execute lubrication excellence and oil analysis programs.</p> <p>Monitor lubricant condition, contamination levels, wear metals, and fluid degradation.</p> <p>Establish oil sampling schedules and testing requirements.</p> <p>Analyze laboratory reports and recommend corrective maintenance actions.</p> <p>Optimize lubrication practices and lubricant selection strategies.</p> <p>Support contamination control and machine health improvement initiatives.</p> <p>ULTRASOUND AND ADVANCED PREDICTIVE TECHNOLOGIES</p> <p>Manage ultrasound inspection activities for mechanical, electrical, and process systems.</p> <p>Conduct inspections for compressed air leaks, steam leaks, bearing defects, and electrical discharge.</p> <p>Evaluate and implement advanced predictive maintenance technologies where applicable.</p> <p>Support development of asset health monitoring systems and online condition monitoring solutions.</p> <p>Identify opportunities to improve predictive maintenance effectiveness.</p> <p>INSPECTION &amp; ASSET INTEGRITY MANAGEMENT</p> <p>Support in developing inspection strategies and risk-based inspection programs for fixed and rotating assets.</p> <p>Ensure inspection activities comply with applicable engineering standards, statutory requirements, and company procedures.</p> <p>Coordinate internal and external inspection activities.</p> <p>Develop statutory inspection programs for pressure vessels, tanks, pipelines, lifting equipment, and critical structures.</p> <p>Coordinate thickness monitoring and corrosion management programs.</p> <p>Manage inspection intervals and equipment integrity risk assessments.</p> <p>Ensure compliance with API, ASME, ISO, and applicable regulatory inspection requirements.</p> <p>Support Fitness-for-Service (FFS) assessments and equipment life extension studies</p> <p>Review inspection findings and assess equipment fitness for service.</p> <p>Monitor asset degradation mechanisms and recommend mitigation actions.</p> <p>Support asset integrity assessments and life extension studies.</p> <p>Maintain inspection records, reports, and regulatory compliance documentation.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education:</b></p> <p> Bachelor s degree in mechanical engineering, Electrical Engineering, Reliability Engineering, Asset Management, Industrial Engineering, or equivalent discipline.</p> <p>Experience:</p> <p> Bachelor s Degree with 5+ years or Higher Diploma with 10+ years of experience in condition monitoring, inspection, reliability engineering, asset integrity, and predictive maintenance within mining, minerals processing, oil &amp; gas, petrochemical, power generation, or heavy industrial operations.</p> <p>Certifications: Mandatory: Vibration Analysis Certification (ISO CAT II minimum).</p> <p>Added Advantage</p> <p> ISO CAT III or IV Vibration Analyst,</p> <p> ISO 18436 Condition Monitoring Certifications,</p> <p> Infrared Thermography Certification Level I/II,</p> <p> Ultrasound Certification Level I/II,</p> <p> ASNT NDT Level II/III,</p> <p><br></p> <p> </p> <p> </p>

<p>Position: E&amp;I Shift In-Charge</p><p>We are looking for an experienced E&amp;I Shift In-Charge to manage the operation, maintenance and troubleshooting of electrical and instrumentation systems in a bulk material handling/port environment.</p><p>Key Responsibilities:</p><ul><li>Manage preventive, predictive and corrective maintenance of electrical and instrumentation systems.</li><li>Handle operation, maintenance and troubleshooting of 11kV/440V substations with SCADA control.</li><li>Troubleshoot Siemens S7 PLC/DCS, SCADA, VFDs and industrial drives.</li><li>Handle maintenance, calibration and troubleshooting of field instruments, transmitters and flowmeters.</li><li>Handle F&amp;G, FACP and CACP systems.</li><li>Supervise maintenance teams during shutdowns, breakdowns and emergency maintenance.</li><li>Troubleshoot stackers, reclaimers, conveyors, wagon loaders, silos and ship loaders.</li><li>Maintain SAP work orders, maintenance records and calibration reports.</li><li>Coordinate with operations and control-room teams to ensure smooth equipment performance.</li><li>Ensure compliance with HSE procedures, PTW, risk assessments and safety standards.</li><li>Support maintenance planning, spare parts management and technical procurement.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Required Qualifications &amp; Experience:</strong></p><ul><li>B.E./B.Tech in Electrical &amp; Electronics/Electrical Engineering with 7 10 years of relevant experience, OR Diploma in Electrical &amp; Electronics/Instrumentation with 10 13 years of relevant experience.</li><li>Experience in Electrical &amp; Instrumentation maintenance, automation and industrial/port environments.</li><li>Hands-on experience with PLCs, SCADA, VFDs, substations and field instrumentation.</li><li>Knowledge of Profibus, Profinet and Modbus is preferred.</li><li>Experience with bulk material handling equipment such as stackers, reclaimers, conveyors and ship loaders is highly preferred.</li></ul><p><strong>Preferred Industry:</strong> Ports, Bulk Material Handling, Mining, Cement, Steel, Power Plant or Heavy Industrial Maintenance.</p>

<p><b>Brief Posting Description </b></p> <p>The Engineer Reliability &amp; Performance is responsible for support in developing, implementing, and continuously improving reliability engineering, asset performance, maintenance optimization, and continuous improvement programs across mining, mineral processing, utilities, and infrastructure assets. The role ensures optimal equipment reliability, availability, maintainability, and operational performance through the application of reliability engineering principles, asset management practices, performance analytics, and data-driven decision-making.</p> <p>The position provides support to technical leadership in Reliability-Centered Maintenance (RCM), Root Cause Failure Analysis (RCFA), Failure Modes and Effects Analysis (FMEA), asset criticality assessment, maintenance strategy optimization, equipment performance monitoring, and reliability improvement initiatives. The role supports Operations, Maintenance, Inspection, and Projects teams by driving sustainable reliability improvements, maximizing asset value, reducing lifecycle costs, and enhancing overall business performance.</p> <p>Detailed Description </p> <p><b>RELIABILITY ENGINEERING &amp; STRATEGY MANAGEMENT</b></p> <p>Support in developing and continuously improving site reliability engineering programs and methodologies.</p> <p>Establish reliability strategies for fixed plant, mobile equipment, utilities, and infrastructure assets.</p> <p>Support in leading asset reliability improvement initiatives to improve equipment availability and operational performance.</p> <p>Support in developing reliability standards, procedures, and best practices.</p> <p>Facilitate reliability reviews and equipment performance assessments.</p> <p>Support long-term asset management and lifecycle planning activities.</p> <p>Ensure reliability objectives align with business and operational requirements.</p> <p>ASSET PERFORMANCE MANAGEMENT</p> <p>Monitor and analyze asset performance, equipment utilization, and operational efficiency.</p> <p>Develop asset performance indicators and equipment health indices.</p> <p>Identify performance gaps, bottlenecks, and reliability constraints affecting production.</p> <p>Conduct performance benchmarking and improvement studies.</p> <p>Support initiatives to improve plant throughput, asset utilization, and operating effectiveness.</p> <p>Drive operational excellence through performance analysis and continuous improvement methodologies.</p> <p>Establish performance improvement roadmaps for critical assets.</p> <p>RELIABILITY-CENTERED MAINTENANCE (RCM)</p> <p>Support in leading Reliability-Centered Maintenance studies for critical assets.</p> <p>Review and optimize maintenance strategies based on equipment criticality and risk.</p> <p>Develop maintenance task plans and reliability improvement recommendations.</p> <p>Optimize preventive, predictive, condition-based, and corrective maintenance programs.</p> <p>Ensure maintenance strategies support reliability and business objectives.</p> <p>Participate in maintenance program reviews and audits.</p> <p>FAILURE ANALYSIS &amp; DEFECT ELIMINATION</p> <p>Lead Root Cause Failure Analysis (RCFA) investigations for significant equipment failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Analyze recurring failures and reliability issues.</p> <p>Identify bad actors and develop corrective action plans.</p> <p>Monitor implementation and effectiveness of reliability improvement actions.</p> <p>Promote defect elimination methodologies throughout maintenance and operations teams.</p> <p>Capture lessons learned and implemented for sustainable solutions.</p> <p>ASSET CRITICALITY &amp; RISK MANAGEMENT</p> <p>Lead asset criticality assessments across all plant and infrastructure assets.</p> <p>Develop and maintain asset criticality rankings and risk profiles.</p> <p>Support risk-based maintenance and reliability decision-making processes.</p> <p>Evaluate operational, safety, environmental, and financial risks associated with asset failures.</p> <p>Participate in HAZID, HAZOP, risk assessments, and reliability reviews.</p> <p>Support business continuity and risk mitigation initiatives.</p> <p>MAINTENANCE OPTIMIZATION</p> <p>Analyze maintenance effectiveness and identify improvement opportunities.</p> <p>Optimize preventive maintenance frequencies and task content.</p> <p>Support development of predictive and condition-based maintenance programs.</p> <p>Evaluate work management performance and maintenance execution effectiveness.</p> <p>Improve maintenance productivity through data analytics and best practice implementation.</p> <p>Support spare parts optimization and critical equipment strategies.</p> <p>PERFORMANCE ANALYTICS &amp; REPORTING</p> <p>Support in developing and maintaining reliability and performance dashboards.</p> <p>Monitor and report key performance indicators including:</p> <p>Overall Equipment Effectiveness (OEE)</p> <p>Equipment Availability</p> <p>Reliability Performance</p> <p>Mean Time Between Failures (MTBF)</p> <p>Mean Time to Repair (MTTR)</p> <p>Failure Rates</p> <p>Maintenance Backlog</p> <p>PM Compliance</p> <p>Cost of Maintenance</p> <p>Asset Utilization</p> <p>Reliability Improvement Benefits</p> <p>Utilize SAP, Power BI, and other analytical tools to support decision-making.</p> <p>Prepare reliability performance reports and management presentations.</p> <p><b>Education: </b></p> <p>Bachelor s degree in mechanical engineering, Electrical Engineering, Reliability Engineering, Industrial Engineering, Asset Management, or equivalent discipline.</p> <p><b>Experience:</b></p> <p> Bachelor s Degree with 5+ years or Higher Diploma with 10+ years of experience in reliability engineering, asset management, maintenance optimization, and performance improvement within mining, minerals processing, oil &amp; gas, petrochemical, power generation, or heavy industrial operations.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirable.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP).</p> <p> Certified Asset Management Assessor (CAMA).</p> <p> Root Cause Analysis (RCA) / Root Cause Failure Analysis (RCFA) Certification.</p> <p> Lean Six Sigma Green Belt or Black Belt</p> <p> Project Management Professional (PMP).</p> <p> SAP PM Certification.</p> <p> Power BI Data Analytics Certification.</p> <p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION DESCRIPTION: Position Title: Mechanical Technician Reports to: Mechanical Supervisor Department: Maintenance and Operations Department Location: Duqm/ Ras Markaz </p><p>JOB PURPOSE: Carry out preventive, corrective, and predictive maintenance of all mechanical systems and equipment across OTTCO s terminals, including pumps, compressors, valves, tanks, piping systems, HVAC units, and other static and rotating machinery, to ensure continuous and reliable operation of all facilities. </p><p>The position ensures that all maintenance and repair activities are performed in compliance with OTTCO s maintenance procedures, HSE policies, OEM recommendations, and international standards, supporting operational reliability and mechanical integrity of terminal assets. </p><p>REPORTING STRUCTURE: Number of Staff Supervised Direct Reports: 0 Total: 0 </p><p>KEY RESPONSIBILITIES: </p><p>Operations &amp; Maintenance </p><p>Perform preventive and corrective maintenance on mechanical systems including pumps, compressors, gearboxes, valves, piping networks, and pressure vessels. </p><p>Dismantle, inspect, and assemble rotating equipment during scheduled and unscheduled maintenance. </p><p>Conduct alignment, balancing, lubrication, and vibration monitoring as per preventive maintenance plans. </p><p>Assist in troubleshooting equipment failures and identify root causes in coordination with the Mechanical Supervisor. </p><p>Carry out routine inspections to detect leaks, abnormal noise, vibration, or wear in mechanical components. </p><p>Support maintenance and inspection of static equipment such as tanks, exchangers, and pipelines. </p><p>Perform mechanical isolations, tagging, and reinstallation in accordance with PTW and safety procedures. </p><p>Update maintenance job cards, inspection findings, and work completion details in the CMMS (SAP/Maximo) system. </p><p>Participate in start-up, shutdown, and major overhaul activities as per approved maintenance plans. </p><p>Project &amp; Technical Support </p><p>Assist in installation, commissioning, and modification of mechanical equipment for ongoing projects or upgrades. </p><p>Participate in inspection and quality verification of mechanical works carried out by contractors. </p><p>Ensure installations comply with design drawings, mechanical standards, and project specifications (API, ASME, ASTM, ISO). </p><p>Provide site feedback on equipment condition and improvement opportunities to enhance reliability and maintainability. </p><p>Safety &amp; Compliance </p><p>Follow OTTCO s HSE, Permit-to-Work (PTW), and mechanical isolation procedures at all times. </p><p>Conduct toolbox talks and ensure proper use of PPE, tools, and lifting equipment. </p><p>Identify and report unsafe acts, conditions, or potential hazards promptly. </p><p>Maintain mechanical workshops, pump stations, and maintenance areas in a clean and safe condition. </p><p>Ensure safe execution of lifting, rigging, and confined space activities as per approved procedures. </p><p>Participate in emergency drills and support plant safety initiatives. </p><p>Teamwork &amp; Coordination </p><p>Coordinate with Electrical, Instrument, and Operations teams to perform multidisciplinary maintenance activities. </p><p>Support supervisors during shutdowns, major overhauls, and turnaround campaigns. </p><p>Assist in mentoring and training junior technicians and contractors to maintain work quality and efficiency. </p><p>Participate in team meetings, planning sessions, and maintenance improvement workshops. </p><p>Documentation &amp; Reporting </p><p>Record daily work activities, inspection data, and equipment readings in job sheets or CMMS. </p><p>Maintain equipment history cards, lubrication charts, and spares consumption logs. </p><p>Report defects, performance issues, and material shortages to supervisors for timely action. </p><p>Support preparation of maintenance reports, failure analysis records, and spare parts lists. </p><p>Continuous Improvement </p><p>Recommend improvements to maintenance practices, procedures, and job plans. </p><p>Participate in root cause analysis (RCA) for repeated mechanical failures. </p><p>Support reliability and efficiency enhancement programs under the ETIZAAN initiative. </p><p>Identify cost-saving opportunities related to spare parts, lubrication, or resource utilization. </p><p>Perform any other duties or special assignments as directed by line management. </p><p>Familiarization with QHSE Policies, Objectives, procedures and its record maintenance </p><p>Awareness on Significant environmental aspects, Health and safety hazards, related actual and potential aspects and risks associated with their risk. </p><p>Awareness on Emergency preparedness and response measures. </p><p>Awareness on implications of not conforming to the integrated managements system requirements, including not fulfilling the organization s compliance obligations </p><p>Key interactions </p><p>Internal: Department Managers, Operations Shift Staff, SCM, TSD, Maintenance, HSE, Fire </p><p>External: OQ, SIPC, Surveying Companies, ROP and Civil Defence, gas companies, other contractors and suppliers as required. Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or National Vocational Qualification (NVQ) in Mechanical Engineering / Industrial Maintenance. </p><p>Professional Certifications </p><p>Authorized certification in Mechanical Maintenance / Rotating Equipment Maintenance. </p><p>HSE and PTW system certifications such as NEBOSH/IOSH preferred. </p><p>Training in Vibration Analysis, Alignment, and Rigging/Lifting Safety is advantageous. </p><p>CMMS (SAP) training and basic computer literacy preferred. </p><p>Experience </p><p>+5 years of hands-on experience in mechanical maintenance within oil &amp; gas terminals, refineries, or heavy industrial facilities. </p><p>Experience in servicing and maintaining centrifugal and positive displacement pumps, compressors, valves, and gearboxes. </p><p>Familiar with mechanical sealing systems, gaskets, and bolting procedures. </p><p>Experience in piping maintenance, leak repair, and hydrotesting. </p><p>Working knowledge of tanks, pressure vessels, exchangers, and HVAC systems. </p><p>Familiar with international standards such as API 610, 650, 682, ASME, and ASTM. </p><p>Technical Competencies </p><p>Skilled in dismantling, assembling, and aligning rotating machinery. </p><p>Proficiency in using precision tools (dial gauges, micrometers, torque wrenches, etc.). </p><p>Ability to interpret mechanical drawings, P&amp;IDs, and maintenance manuals. </p><p>Knowledge of lubrication practices, material compatibility, and corrosion prevention. </p><p>Capable of performing mechanical troubleshooting and identifying failure modes. </p><p>Familiar with safe rigging, lifting, and confined space work practices. </p><p>Behavioral Competencies </p><p>Safety-oriented with strong discipline and attention to detail. </p><p>Good communication and teamwork abilities across multi-discipline teams. </p><p>Capable of working under supervision and delivering high-quality workmanship. </p><p>Proactive, reliable, and committed to continuous improvement. </p><p>Upholds OTTCO s values of Safety, Integrity, Reliability, and Operational Excellence. </p><p></p></section>

<p><b>Brief Posting Description </b></p> <p>The Planning Engineer is responsible for developing, implementing, and managing maintenance planning, scheduling, work management, shutdown planning, and maintenance control processes to ensure safe, reliable, and efficient plant operations.This role supports leadership in maintenance planning and resource coordination, and ensures the effective utilization of labor, materials, and services. A key focus of the position is establishing maintenance planning systems, CMMS processes, and work management standards to support commissioning, start-up, and sustainable plant operations.</p> <p>Detailed Description </p> <p>MAINTENANCE PLANNING &amp; SCHEDULING</p> <p>Develop and implement maintenance planning and scheduling processes.</p> <p>Ensure all preventive, predictive, corrective, and shutdown maintenance activities are properly planned and scheduled.</p> <p>Review work requests and convert approved work into executable job plans.</p> <p>Develop detailed work packs including labor requirements, materials, tools, permits, and procedures.</p> <p>Coordinate weekly and monthly maintenance schedules with Operations and Maintenance teams.</p> <p>Monitor schedule compliance and planning effectiveness.</p> <p>Ensure maintenance backlogs are effectively managed and prioritized.</p> <p>Support development of maintenance strategies for critical equipment.</p> <p>Own and govern the site's maintenance work management process, ensuring compliance with planning, scheduling, execution, and close-out standard</p> <p>Coordinate with warehouse and procurement teams to ensure timely availability of critical spares and shutdown materials</p> <p>Develop and maintain maintenance performance dashboards, reporting automation, and planning analytics tools to improve decision-making</p> <p>Coordinate and lead weekly, monthly and quarterly planning meetings in coordination with stakeholders</p> <p>WORK MANAGEMENT &amp; CMMS ADMINISTRATION</p> <p>Manage maintenance work management processes within ERP/CMMS systems.</p> <p>Ensure work order quality, data accuracy, and system compliance.</p> <p>Develop and maintain equipment hierarchies, asset registers, and maintenance plans.</p> <p>Monitor key work management KPIs.</p> <p>Maintain planning and scheduling standards across all maintenance disciplines.</p> <p>Ensure historical maintenance records are maintained for reliability analysis.</p> <p>Drive continuous improvement of CMMS utilization and effectiveness.</p> <p>SHUTDOWN &amp; TURNAROUND PLANNING</p> <p>Lead planning and preparation for plant shutdowns, turnarounds, and major maintenance campaigns.</p> <p>Develop integrated shutdown schedules and resource plans.</p> <p>Coordinate labor, equipment, materials, and contractor requirements.</p> <p>Monitor shutdown planning milestones and readiness reviews.</p> <p>Support execution teams during shutdown implementation.</p> <p>Facilitate shutdown governance meetings, readiness reviews, and critical path monitoring activities</p> <p>Conduct post-shutdown reviews and lessons learned assessments.</p> <p>PERFORMANCE MONITORING &amp; REPORTING</p> <p>Develop maintenance planning and execution performance dashboards.</p> <p>Monitor KPIs including:</p> <p>Schedule Compliance</p> <p>PM Compliance</p> <p>Backlog Management</p> <p>Work Order Closure Rates</p> <p>Contractor Performance</p> <p>Maintenance Cost Performance</p> <p>Shutdown Performance</p> <p>Prepare weekly and monthly maintenance performance reports.</p> <p>Analyze trends and recommend improvement initiatives.</p> <p>Support annual maintenance budgeting and forecasting processes.</p> <p>CONTRACTOR &amp; RESOURCE MANAGEMENT</p> <p>Coordinate with contract administrator for mobilization and demobilization activities.</p> <p>Evaluate contractor performance and productivity.</p> <p>Ensure contractors comply with safety, quality, and environmental requirements.</p> <p>Optimize utilization of labor, equipment, and maintenance resources.</p> <p>Coordinate external specialist services and OEM support.</p> <p>LEADERSHIP &amp; TEAM MANAGEMENT</p> <p>Lead maintenance planners, schedulers from Contractors</p> <p>Develop workforce capability and succession plans.</p> <p>Promote a culture of accountability, collaboration, and continuous improvement.</p> <p>Ensure departmental objectives align with maintenance business goals.</p> <p>SAFETY &amp; COMPLIANCE</p> <p>Ensure compliance with company safety policies and procedures.</p> <p>Participate in risk assessments and shutdown safety planning.</p> <p>Ensure contractor compliance with permit-to-work and site safety requirements.</p> <p>Support incident investigations and corrective action implementation.</p> <p>Promote safe work practices and zero-harm objectives.</p> <p>BUDGET &amp; COST CONTROL</p> <p>Support preparation of annual maintenance budgets.</p> <p>Monitor maintenance expenditures against approved budgets.</p> <p>Track contractor costs and service contract performance.</p> <p>Identify cost optimization opportunities without compromising reliability.</p> <p>Support spare parts and inventory management strategies.</p> <p>Provide cost forecasting and budget variance analysis.</p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor s degree in mechanical engineering or a related field</p> <p><b>Experience: </b></p> <p> 10+ years of maintenance planning, shutdown planning, or maintenance management experience in mining, minerals processing, or heavy industrial operations.</p> <p> Proven experience with large-scale shutdown planning and resources management.</p> <p> Experience supporting commissioning, start-up, and operational ramp-up activities is desirabl</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> Certified Maintenance &amp; Reliability Practitioner (CMRP)</p> <p> Project Management Professional (PMP)</p> <p> Six-sigma (BB)</p> <p>Technical Skills: </p> <p> Maintenance Planning and Scheduling</p> <p> Work Management Systems</p> <p> Shutdown and turnaround planning</p> <p> SAP PM</p> <p> Budgeting and Cost Control</p> <p> Resource Planning</p> <p> Procurement Processes</p> <p> Contractor Performance Management</p> <p> Maintenance KPI Reporting and Analysis</p> <p> Inventory and Spare Parts Management</p> <p> Risk Management</p> <p>Soft Skills: </p> <p><br></p>

<p>Overall Purpose of the Role: A Sales Engineer, or Customer Engineer, is a sales professional who specializes in understanding all of the technical aspects of a technical Bus and explaining them to potential consumers. Their duties include consulting on bus development, explaining product features to customers during live demonstrations and negotiating contract terms.</p><p>Reporting To: Sales and Marketing Manager</p><p>Key Responsibilities:</p><ol><li>GENERAL AND TASK MANAGEMENT<br>Implement divisional set strategies to achieve growth objectives and enhance overall sales achievements.<br>Implement the Market segmentation strategies; Geographically and by type of business.<br>Screen the designated territory and classify customers accordingly.<br>Assist Customers to properly select the best commercial transport solution for their application upon gaining a clear understanding of their businesses and requirements; Establish and maintain good working relationships with them to encourage repeat and referral business.<br>Monitor market and competitor activity, trends and demands, and inform appropriate persons within the organization<br>Develop an in depth understanding of the customers business and identify sales opportunities for products.<br>Prepare and deliver product technical presentations that explain product features, competitive advantages, or services to prospective customers.<br>Ability to work in a high-stress sales environment and multitask<br>Work closely with operations team to understand the different features available in KM products.<br>Prepare monthly and weekly sales reports to the management.<br>Answer and receive enquiries from various national and international customers.<br>Participate in national and international exhibitions, meetings to ensure having a good place in market.<br>Conduct market research and prepare market forecast report to the line manager to be presented in the market.<br>Following up the market trend and knowing the GCC and MENA region bus industry references.</li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li>Excellent knowledge in bus application and segments.</li><li>Excellent drive line technical knowledge</li><li>Excellent telematic and ITS knowledge</li><li>Proven Sales experience</li><li>Team player, Exceptional Presentation Skills, Proactive work style, creativity, energy</li><li>Excellent Knowledge of office management systems and procedures.</li><li>Excellent time management skills and ability to multi-task and prioritize work.</li><li>Attention to detail and problem-solving skills.</li><li>Excellent written and verbal communication skills.</li><li>Strong organizational and planning skills.</li><li>Excellent Interpersonal skills.</li><li>Excellent customer services attitude.</li><li>Excellent Negotiation and social problem-solving skills.</li><li>Ability to work in a high-stress sales environment and multitask</li><li>Bachelor s Degree in Business administration, Sales and Marketing or Mechanical /Electrical Engineering.</li><li>Proficiency in the use of Personal Computers, and knowledge of Microsoft applications.</li><li>Professional experience in the Truck Business, medium or heavy duty.</li><li>Commercial Automotive or Heavy Equipment.</li><li>Vast Knowledge of the local Gulf market dynamics.</li><li>Able to communicate fluently in English, written and spoken.</li><li>Arabic is a definite plus.</li><li>Minimum of 5 years of Sales experience in Automotive industry.</li><li>After-sales experience.</li></ul>

<p>Heavy Truck Driver Responsibilities: - Operate heavy trucks safely to transport construction materials, steel structures, sandwich panels, equipment, and tools to and from project sites. - Perform daily pre-trip and post-trip inspections of the vehicle, including brakes, tires, lights, fluids, and safety equipment. - Ensure cargo is properly loaded, secured, and transported in accordance with safety regulations. - Follow designated routes and delivery schedules while complying with traffic laws and company procedures. - Maintain accurate records of deliveries, fuel usage, mileage, and vehicle inspections.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>Evaluates mechanical and electromechanical systems and products by designing and conducting research programs; applying principles of mechanics, thermodynamics, hydraulics, heat transfer, and materials. Product capabilities by designing feasibility and testing methods. Develops mechanical and electromechanical products by studying customer requirements; researching and testing manufacturing and assembly methods and materials; soliciting observations from operators. Planning and designing new production processes Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies. Designing and implementing cost-effective equipment modifications to help improve safety and reliability and Developing, testing and evaluating theoretical designs; Developing a project specification, often including those from other engineering disciplines; Discussing and solving complex problems with manufacturing departments, sub-contractors, suppliers and customers. Managing projects using engineering principles and techniques Using research, analytical, conceptual and planning skills, particularly mathematical modelling and computer-aided design. Recommending modifications following prototype test results Working with other professionals, within and outside the engineering sector</p><p><strong>Desired Candidate Profile</strong></p><p>Strong written and verbal communication skills Planning and organizational skills, such as time and resource allocation &amp; commercial awareness Knowledge of Design Software, Strong initiative and Excellent problem solving skills. Experience of 5-8 years in Design and supervision of services for Buildings and Infrastructure</p>

<p><b>Brief Posting Description </b></p> <p>The Engineer Automation is responsible for supporting the maintenance, reliability, availability, and performance optimization of automation, process control, and industrial digital systems across the Copper Concentrator Plant. The role supports the safe, reliable, and cost-effective operation of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA systems, Human Machine Interfaces (HMI), industrial communication networks, historians, servers, workstations, and associated automation infrastructure through maintenance execution, troubleshooting, cybersecurity compliance, shutdown support, commissioning activities, and continuous improvement initiatives.</p> <p>The position provides technical support to maintenance teams and contractors and is responsible for maintaining automation and control systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking &amp; Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure.</p> <p>The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p><b>Detailed Description </b></p> <p>AUTOMATION &amp; CONTROL SYSTEM MANAGEMENT</p> <p>Support maintenance activities for automation, process control, and industrial digital systems across the concentrator plant.</p> <p>Ensure automation systems support safe, reliable, and efficient plant operation.</p> <p>Assist in implementing maintenance strategies to improve system reliability and availability.</p> <p>Monitor automation system performance and recommend corrective actions.</p> <p>Ensure compliance with OEM recommendations, engineering standards, and statutory requirements.</p> <p>Support asset lifecycle management and replacement planning activities.</p> <p>Provide technical support for automation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and operational readiness activities.</p> <p>DCS, PLC &amp; SCADA SYSTEMS</p> <p>Support reliability improvement initiatives for DCS, PLC, SCADA, HMI, historian, and control system infrastructure.</p> <p>Assist with automation system configuration, maintenance, and performance optimization.</p> <p>Troubleshoot control logic, process interlocks, alarms, permissives, and control loops.</p> <p>Support backup, restore, and disaster recovery activities.</p> <p>Assist with software version control and change management processes.</p> <p>Support testing and verification of DCS, PLC, and SCADA modifications.</p> <p>Maintain automation documentation, logic diagrams, and system records.</p> <p>MOC &amp; CHANGE GOVERNANCE</p> <p>Support implementation of approved Management of Change (MOC) requirements for automation modifications and software changes.</p> <p>Assist in reviewing proposed changes to DCS, PLC, SCADA, HMI, historian, control logic, alarms, interlocks, and associated automation infrastructure.</p> <p>Participate in risk assessments, testing, validation, and documentation activities associated with approved changes.</p> <p>Coordinate with Operations, Instrumentation, Electrical, Reliability, and Projects teams during implementation activities.</p> <p>Support FAT, SAT, simulation testing, commissioning, and post-implementation verification activities.</p> <p>Ensure technical documentation remains updated following approved modifications.</p> <p>Participate in post-change reviews and verification activities.</p> <p>PROCESS CONTROL &amp; OPTIMIZATION</p> <p>Support process control and automation improvement initiatives.</p> <p>Analyze process performance and identify opportunities for control-loop optimization.</p> <p>Assist with control-loop tuning and performance monitoring.</p> <p>Support initiatives aimed at improving throughput, recovery, plant stability, and energy efficiency.</p> <p>Support implementation of advanced process control technologies and digital solutions.</p> <p>Work closely with Operations and Metallurgical teams to optimize plant performance</p> <p>IT/OT CYBERSECURITY INTERFACE</p> <p>Support implementation of cybersecurity requirements for DCS, PLC, SCADA, HMI, historians, servers, workstations, and industrial communication networks.</p> <p>Assist with user access management, backup verification, patching activities, and cybersecurity compliance requirements.</p> <p>Participate in cybersecurity audits, vulnerability assessments, and incident investigations as required.</p> <p>Support cybersecurity-related upgrades and remediation activities.</p> <p>Ensure automation activities comply with approved OT cybersecurity policies and procedures.</p> <p>Maintain coordination between IT, OT Cybersecurity, Automation, Instrumentation, Electrical, Operations, and Project teams.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor's Degree in Automation Engineering, Control Systems Engineering, Electrical &amp; Automation Engineering, Mechatronics Engineering, Instrumentation &amp; Control Engineering, or related discipline is mandatory.</p> <p><b>Experience</b>: </p> <p> Bachelor s Degree with 5+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 3 years of experience in Automation maintenance and reliability engineering is mandatory.</p> <p> Experience supporting DCS, PLC, SCADA, and industrial communication systems in mineral processing or heavy&nbsp;</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><strong>Key Responsibilities</strong></span></p><br><ul><li><span>Provide project management support and mechanical engineering guidance for industrial facilities and infrastructure projects.</span></li><li><span>Support the development and maintenance of engineering standards, specifications, and procedures.</span></li><li><span>Monitor contractor performance to ensure work is completed in accordance with approved drawings, specifications, quality standards, and project requirements.</span></li><li><span>Manage and control site activities to achieve project objectives within approved schedule and budget constraints.</span></li><li><span>Prepare and present project progress reports, forecasts, and status updates to management.</span></li><li><span>Lead projects through all project phases, from concept and scope development through technical evaluation, execution, commissioning, and handover.</span></li><li><span>Coordinate engineering activities and pre-operational testing required for successful commissioning and start-up.</span></li><li><span>Evaluate proposed projects and provide technical recommendations.</span></li><li><span>Prepare technical reports, specifications, and supporting project documentation.</span></li><li><span>Monitor and assess contractor performance and compliance with project requirements.</span></li><li><span>Follow instructions and guidance provided by the designated Project Manager or Engineer-in-Charge.</span></li><li><span>Ensure compliance with applicable health, safety, environmental, and quality standards throughout project execution.</span></li></ul> a { text-decoration: none; color: #464feb;}tr th, tr td { border: 1px solid #e6e6e6;}tr th { background-color: #f5f5f5;}<br><p><span><strong>Qualifications</strong></span></p><br><ul><li><span>Bachelor's degree in Mechanical Engineering.</span></li><li><span>Master's degree in Engineering, Management, or a Project Management certification is advantageous.</span></li><li><span>Chartered Engineer status is considered an advantage.</span></li></ul><p><span><strong>Experience &amp; Skills</strong></span></p><br><ul><li><span>Minimum 10 years of project, design, and engineering experience within heavy industrial environments.</span></li><li><span>Experience in brownfield industrial projects is preferred.</span></li><li><span>Strong knowledge of project management principles and practices.</span></li><li><span>Proficiency in SAP and Microsoft Office applications (Word, Excel, PowerPoint).</span></li><li><span>Working knowledge of engineering and drafting software such as AutoCAD.</span></li><li><span>Experience with project planning software such as Microsoft Project and/or Primavera.</span></li><li><span>Sound understanding of budgets, contractual requirements, business processes, and organizational decision-making.</span></li><li><span>Experience supervising installation and commissioning of bulk material handling equipment, including conveyors and associated static and rotating equipment.</span></li><li><span>Proven experience managing contractors and multidisciplinary project teams.</span></li><li><span>Strong written and verbal communication skills, including technical reporting.</span></li><li><span>Demonstrated decision-making, coordination, and stakeholder management capabilities.</span></li><li><span>Knowledge of standard contract terms and conditions.</span></li><li><span>Working knowledge of industrial safety practices and project execution requirements.&nbsp;</span></li></ul><br><p><span><strong>Moving forward together</strong></span></p><br><p><span>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</span></p><br><p><span>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</span></p><br><p><span>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</span></p><br> </div>

<p><h4>Qualifications & Experience</h4> <p><strong>Qualification:</strong> Engineering degree in Mechanical Engineering.</p> <p><strong>Experience:</strong> Minimum 12 years' experience as Rotating Engineer in the oil and gas industry.</p> <p>Experience as Rotating Engineer in projects involving gas turbines and compressors.</p> <p>Strong leadership skills and good communication skills.</p> <p>Good analytical skills.</p> <p>Familiarity with Total general specifications is a plus, along with relevant codes and standards.</p> <p><strong>Language:</strong> Fluent English.</p> <p>Ability to work on projects in a complex and multicultural environment.</p> <h4>Activities</h4> <ul> <li>Identify Rotating Engineering technical decisions to be made. Define and manage a clear way forward for these decisions and report to the Package Manager.</li> <li>Work with the weight control engineer and engineering team to ensure close weight monitoring and control.</li> <li>Ensure close coordination with other disciplines on all engineering, constructability, and operational matters.</li> <li>Ensure that relevant feedback and lessons learned from previous similar projects are considered.</li> <li>Support fabrication and construction engineering by reviewing engineering documents, approving modifications, reviewing non-conformities, and assisting in closure of punch lists.</li> <li>Support the construction group by ensuring all mechanical rotating equipment and its auxiliaries are installed correctly as per standards, properly supported, aligned, and leveled according to design requirements.</li> <li>Support expediting closure of punch lists by following up with relevant parties from the contractor and/or vendor.</li> <li>Support the project during installation and hookup stages by reviewing and approving work packs and reviewing red marks.</li> <li>Ensure closure of mechanical rotating engineering dossiers consisting of contractor and vendor deliverables in a timely manner as per project requirements.</li> <li>Ensure project documents related to the Mechanical Rotating Engineering discipline are reviewed and commented on in a timely manner and in accordance with company standards, project specifications, and contractual requirements.</li> <li>Coordinate and issue project responses to contractors' and vendors' requests on engineering design clarifications and technical query reports (TQR).</li> <li>Identify potential deviations and derogations to the company and assist in preparation of deviation packages.</li> <li>Review and approve deviation and concession requests from contractors and/or vendors, aligned with the company Technical Referential Person (TRP).</li> <li>Consult the Engineering & Construction department to process derogation requests and interface with relevant TRPs to secure needed approvals.</li> <li>Review and expedite final project documentation including final dossiers and as-built drawings.</li> <li>Support the commissioning execution phase related to the rotating equipment and package.</li> <li>Follow the execution of mechanical commissioning activities to achieve commissioning schedule completion targets.</li> <li>Supervise commissioning execution to ensure all technical and contractual information is properly recorded, collected, and available for inspection and reference as required by law, regulations, and company policies.</li> <li>Control and follow up on vendors' commissioning scope of work activities such as site acceptance tests (SAT), operational test procedures (OTP), document updates, closing of punch lists, and reporting.</li> </ul></p><p></p>

<p><h4>Qualifications & Experience</h4> <p><strong>Qualification:</strong> Engineering degree in Mechanical Engineering.</p> <p><strong>Experience:</strong> Minimum 12 years' experience as Rotating Engineer in the oil and gas industry.</p> <p>Experience as Rotating Engineer in projects involving gas turbines and compressors.</p> <p>Strong leadership skills and good communication skills.</p> <p>Good analytical skills.</p> <p>Familiarity with Total general specifications is a plus, along with relevant codes and standards.</p> <p><strong>Language:</strong> Fluent English.</p> <p>Ability to work on projects in a complex and multicultural environment.</p> <h4>Activities</h4> <ul> <li>Identify Rotating Engineering technical decisions to be made. Define and manage a clear way forward for these decisions and report to the Package Manager.</li> <li>Work with the weight control engineer and engineering team to ensure close weight monitoring and control.</li> <li>Ensure close coordination with other disciplines on all engineering, constructability, and operational matters.</li> <li>Ensure that relevant feedback and lessons learned from previous similar projects are considered.</li> <li>Support fabrication and construction engineering by reviewing engineering documents, approving modifications, reviewing non-conformities, and assisting in closure of punch lists.</li> <li>Support the construction group by ensuring all mechanical rotating equipment and its auxiliaries are installed correctly as per standards, properly supported, aligned, and leveled according to design requirements.</li> <li>Support expediting closure of punch lists by following up with relevant parties from the contractor and/or vendor.</li> <li>Support the project during installation and hookup stages by reviewing and approving work packs and reviewing red marks.</li> <li>Ensure closure of mechanical rotating engineering dossiers consisting of contractor and vendor deliverables in a timely manner as per project requirements.</li> <li>Ensure project documents related to the Mechanical Rotating Engineering discipline are reviewed and commented on in a timely manner and in accordance with company standards, project specifications, and contractual requirements.</li> <li>Coordinate and issue project responses to contractors' and vendors' requests on engineering design clarifications and technical query reports (TQR).</li> <li>Identify potential deviations and derogations to the company and assist in preparation of deviation packages.</li> <li>Review and approve deviation and concession requests from contractors and/or vendors, aligned with the company Technical Referential Person (TRP).</li> <li>Consult the Engineering & Construction department to process derogation requests and interface with relevant TRPs to secure needed approvals.</li> <li>Review and expedite final project documentation including final dossiers and as-built drawings.</li> <li>Support the commissioning execution phase related to the rotating equipment and package.</li> <li>Follow the execution of mechanical commissioning activities to achieve commissioning schedule completion targets.</li> <li>Supervise commissioning execution to ensure all technical and contractual information is properly recorded, collected, and available for inspection and reference as required by law, regulations, and company policies.</li> <li>Control and follow up on vendors' commissioning scope of work activities such as site acceptance tests (SAT), operational test procedures (OTP), document updates, closing of punch lists, and reporting.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under direct supervision, the Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under direct supervision, the Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Do you picture yourself as a Duty Engineer? At Crowne Plaza Resort Salalah, our goal is to make business travel work — and that’s where YOU come in.</span></p><br><p><span>When you join Crowne Plaza Resort Salalah, you are more than just your job title. We look for energetic, confident, and ambitious individuals who excel in their roles and help our guests succeed.</span></p><br><p><span>Set on 45 acres of beautiful tropical gardens and a long stretch of pristine sandy beach, Crowne Plaza Resort Salalah is perfectly positioned for business, meetings, and leisure travel.</span></p><br><p><span>As a Duty Engineer, you will play a vital role in maintaining the hotel's building systems, guest rooms, and public areas to the highest standards. You will ensure all engineering operations support an exceptional guest experience while promoting safety, sustainability, and cost-effective maintenance.</span></p><br><p><span>A little taste of your day-to-day</span></p><br><ul><li><p><span>Perform preventive and corrective maintenance on electrical, mechanical, HVAC, plumbing, and other building systems.</span></p><br></li><li><p><span>Respond promptly to guest maintenance requests and operational emergencies.</span></p><br></li><li><p><span>Inspect guest rooms, public areas, and back-of-house facilities to ensure they meet IHG brand standards.</span></p><br></li><li><p><span>Troubleshoot equipment faults and carry out repairs efficiently to minimize downtime.</span></p><br></li><li><p><span>Monitor the performance of plant and engineering equipment, reporting any defects or major maintenance requirements.</span></p><br></li><li><p><span>Ensure compliance with health, safety, fire, and environmental regulations and hotel policies.</span></p><br></li><li><p><span>Support energy conservation and sustainability initiatives by promoting efficient use of utilities and resources.</span></p><br></li><li><p><span>Maintain engineering tools, equipment, and maintenance records accurately.</span></p><br></li><li><p><span>Work closely with other hotel departments to support daily operations and deliver excellent guest service.</span></p><br></li></ul><p><span>What do we need from you?</span></p><br><ul><li><p><span>Diploma or certification in Electrical, Mechanical, HVAC, or a related Engineering discipline.</span></p><br></li><li><p><span>Minimum of 3 years' experience in hotel engineering or facilities maintenance, including at least 2 years of experience in GCC countries.</span></p><br></li><li><p><span>Strong knowledge of electrical, plumbing, HVAC, mechanical systems, and general building maintenance.</span></p><br></li><li><p><span>Proven ability to troubleshoot, repair, and maintain hotel engineering systems efficiently.</span></p><br></li><li><p><span>Good communication, teamwork, and problem-solving skills.</span></p><br></li><li><p><span>Service-oriented with the ability to work independently and under pressure.</span></p><br></li><li><p><span>Willingness to work flexible shifts, including weekends, public holidays, and emergency call-outs when required.</span></p><br></li></ul><br>At IHG, we’ve made a promise. As one of the world’s leading hotel groups, we’re here to deliver True Hospitality for Good. Making our guests and colleagues feel welcome, cared for, recognised and respected – wherever they are in the world. Want to be part of the journey? </div>