Heavy equipment mechanical engineer Jobs - muscat Oman

<p><h4>Position description</h4> <p><strong>Reports to:</strong> Shift Team Lead OTTCO<br> <strong>Department:</strong> Maintenance & Operation Department<br> <strong>Location:</strong> Duqm & Ras Markaz</p> <h4>Job purpose</h4> <p>Performs safe, orderly and efficient panel control operations for flow regulations on reception, storage and expedition (pressure, flow, rate, reading, gauges, inspecting product) at assigned sites (Muscat / Ras Markaz / Duqm), under shift Operation Supervisor's scope, as individual contributor by:</p> <ul> <li>Controlling and regulating the pressure, flow and rate of the facility and correcting anomalies.</li> <li>Overseeing, reading, and maintaining the equipment that controls the pressure and flow of plant.</li> <li>Watching gauges, inspecting product, troubleshooting, record keeping.</li> <li>Preparing written documents for supervisors or safety inspectors to ensure products meet the required specification and contribute to regular and safest operations.</li> </ul> <p>The position will act in accordance with OTTCO's mission, vision, values and strategies, as well as policies, guidelines and international standards, supported by an IT technology platform, HSE standards, Omani government and other legal justifications, and best international practices in consonance with national objectives.</p> <h4>Reporting structure</h4> <p><strong>Number of staff supervised (direct reports):</strong> 0</p> <h4>Key responsibilities</h4> <p><strong>General:</strong></p> <ul> <li>Perform all CRO operation activities role in petrochemical terminal and hydrocarbons.</li> <li>Accept shift from previous shift panel operator with detailed log sheet of operational adjustments and changes during previous shift.</li> <li>Ensure continuity of operational issues handed over by the previous shift and take necessary action.</li> <li>Capture all major highlights and constraints experienced during the shift in the log sheet in detail for the following shift.</li> <li>Monitor unit's process performance on a continuous basis using the Distributed Control System (DCS).</li> <li>Diagnose abnormal situations and take corrective action from the control panel.</li> <li>Ensure equipment is operating within specified parameters and report serious operational deviations to the Shift Team Leader.</li> <li>Review and compare outside log sheet readings at regular intervals with the control room instrumentation readings and ensure they correlate.</li> <li>Review laboratory sample analysis results by referring to Laboratory Information Management System updates and make necessary adjustments of the control panel instruments.</li> <li>Ensure Shift Team Leader is fully informed on all related aspects and obtain guidance when necessary.</li> <li>Control operating plant start-ups, shutdowns, and emergencies by alterations of speed, temperature, pressure and flow rates as necessary.</li> <li>Facilitate the shutdown and start-up for turnaround, maintenance and inspection purposes with adherence to the Standard Operating Procedures (SOP).</li> <li>Implement emergency procedures as dictated by the circumstances and SOPs.</li> <li>Contribute to the integrity of the organisation structure through constructive feedback.</li> <li>Contribute to improving processes and procedures within the department in conjunction with Team Leader.</li> <li>Adhere to Standard Operating Procedures and instructions received from Shift Team Leader in coordination with the Field Operator.</li> <li>Maintain log sheets and logbooks reporting the highlights of daily shift work.</li> <li>Record safety incidents (near misses, observations, incidents).</li> <li>Provide input into the weekly or monthly reports if required by the Area Department.</li> <li>Maintain continuity of panel operation and close all critical issues scheduled for the allocated shift.</li> <li>Communicate and correct process quality problems.</li> <li>Participate in Process Safety Management (PSM) activities.</li> <li>Effectively interact with all levels of employees, clients and vendors.</li> <li>Support unit turnarounds including work list identification/justification, procedure writing, procedure review and equipment inspection.</li> <li>Troubleshoot process operations, communicate and correct process quality problems.</li> <li>Perform other related duties or assignments as directed.</li> <li>Familiarize with QHSE policies, objectives, procedures and its record maintenance.</li> <li>Maintain awareness of significant environmental aspects, health and safety hazards, related actual and potential aspects and risks associated with their risk.</li> <li>Maintain awareness of emergency preparedness and response measures.</li> <li>Maintain awareness of implications of not conforming to the integrated management system requirements, including not fulfilling the organization's compliance obligations.</li> </ul> <h4>Qualifications & experience</h4> <p><strong>Minimum qualifications:</strong> Diploma in Petrochemical or Oil / Gas or equivalent.</p> <p>Excellent knowledge of written, read, and spoken English (required). Arabic - native (desirable).</p> <p><strong>Experience and background:</strong></p> <ul> <li>5-7 years of experience in hydrocarbons refining, petrochemical, process engineering or related industry.</li> <li>Relevant experience in the Oil & Gas / Refinery / Petrochemical industry with experience in Jetty / Tank Farm / Gantry units.</li> <li>Knowledge of fuel sector equipment.</li> <li>Knowledge of the refinery's offsite facilities and procedures.</li> </ul> <p><strong>Skills:</strong></p> <ul> <li>Good functional knowledge of DCS.</li> <li>Good knowledge of relevant operations, HSE requirements, Oil/Gas process and systems procedures and practices.</li> <li>Ability to perform as a team player.</li> <li>Self-motivated and dependable, demonstrating strong initiative.</li> <li>Ability to deal with change and demonstrate flexibility as required.</li> </ul> <h4>Key interactions</h4> <p><strong>Internal:</strong> Department Managers, Operations Shift Staff, SCM, TSD, Maintenance, HSE, Fire</p> <p><strong>External:</strong> OQ, SIPC, Surveying Companies, ROP and Civil Defence, gas companies, other contractors and suppliers as required.</p> <h4>Notable working conditions</h4> <p>Field operations and office environment, moderate to intensive computer screen use.</p></p><p></p>

<p><h4>Principal accountabilities</h4> <p>The warehouse operations supervisor is responsible to the site manager for the effective management of all functions supporting the Category II Satellite supply account. Responsible for effective supervision of subordinates. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <p>Ensures the condition and identification of all items received, stored, issued, turned-in, shipped or transferred to and from the supply account.</p> <p>Manages the shelf-life program and provides technical assistance to the other functions on site as required.</p> <p>Ensures the inspection of local purchase assets, delivered under contracts that require acceptance.</p> <p>Research part numbers to obtain National Stock Numbers (NSNs) that need loading.</p> <p>Maintains a limited file of technical orders and research materials. Issue items to maintenance quality control and the Time Compliance Technical Order (TCTO) kit monitor to ensure TCTO modifications and preservation are conducted.</p> <p>Establishes an aggressive quality assurance/inspection program to ensure that all Material Storage and Distribution (MS&D) functions are in compliance with applicable warehousing procedures and safety practices. Provides inspection reports to the MS&D supervisor and inspected activity.</p> <p>Manages the Material Deficiency Report and Supply Discrepancy Report (SDR) programs.</p> <p>Acts as point of contact for coordination with the Environmental Manager on storage requirements for health hazard items.</p> <p>Develops standards for subordinates. Implements the precepts of quality assurance within the guidelines set forth in the ISO 9001 program. Ensures that all work is completed to this quality standard and provides employees with feedback on their progress.</p> <p>Provides on-the-job training to newly assigned personnel.</p> <p>Performs all assigned duties related to the receipt, issue, storage and maintenance of hazardous materials (HAZMAT) and supplies stored on site when tasked.</p> <p>Maintains vendor BPA files.</p> <p>Performs other duties as assigned.</p> <p>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</p> <h4>Minimum requirements</h4> <p>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p> <p>Knowledge of warehouse layout, design and setup to meet Department of Defense and Occupational Safety and Health Administration safety standards required.</p> <p>Fundamental knowledge of the Department of Defense and USAF or US service equivalent Hazardous Materials Program required.</p> <p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p> <p>Will be required to operate material handling equipment up to 10k forklift.</p> <p>High school diploma or equivalent required.</p> <p>Five to seven years' experience in warehousing and supply chain associated with ILSS required.</p> <p>Must have three years' experience in a supervisory capacity.</p> <p>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</p> <p>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</p> <p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p> <p>Ability to travel domestically and internationally.</p> <h4>Preferred qualifications</h4> <p>Knowledge of USAF or US service equivalent automated system Integrated Logistics System Supply (ILSS) policies and procedures preferred.</p> <h4>Compensation details</h4> <p>Hourly and additional incentives.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting: 04/27/2026 - Until filled.</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Principal accountabilities</h4> <p>The warehouse operations supervisor is responsible to the site manager for the effective management of all functions supporting the Category II Satellite supply account. Responsible for effective supervision of subordinates. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <p>Ensures the condition and identification of all items received, stored, issued, turned-in, shipped or transferred to and from the supply account.</p> <p>Manages the shelf-life program and provides technical assistance to the other functions on site as required.</p> <p>Ensures the inspection of local purchase assets, delivered under contracts that require acceptance.</p> <p>Research part numbers to obtain National Stock Numbers (NSNs) that need loading.</p> <p>Maintains a limited file of technical orders and research materials. Issue items to maintenance quality control and the Time Compliance Technical Order (TCTO) kit monitor to ensure TCTO modifications and preservation are conducted.</p> <p>Establishes an aggressive quality assurance/inspection program to ensure that all Material Storage and Distribution (MS&D) functions are in compliance with applicable warehousing procedures and safety practices. Provides inspection reports to the MS&D supervisor and inspected activity.</p> <p>Manages the Material Deficiency Report and Supply Discrepancy Report (SDR) programs.</p> <p>Acts as point of contact for coordination with the Environmental Manager on storage requirements for health hazard items.</p> <p>Develops standards for subordinates. Implements the precepts of quality assurance within the guidelines set forth in the ISO 9001 program. Ensures that all work is completed to this quality standard and provides employees with feedback on their progress.</p> <p>Provides on-the-job training to newly assigned personnel.</p> <p>Performs all assigned duties related to the receipt, issue, storage and maintenance of hazardous materials (HAZMAT) and supplies stored on site when tasked.</p> <p>Maintains vendor BPA files.</p> <p>Performs other duties as assigned.</p> <p>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</p> <h4>Minimum requirements</h4> <p>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p> <p>Knowledge of warehouse layout, design and setup to meet Department of Defense and Occupational Safety and Health Administration safety standards required.</p> <p>Fundamental knowledge of the Department of Defense and USAF or US service equivalent Hazardous Materials Program required.</p> <p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p> <p>Will be required to operate material handling equipment up to 10k forklift.</p> <p>High school diploma or equivalent required.</p> <p>Five to seven years' experience in warehousing and supply chain associated with ILSS required.</p> <p>Must have three years' experience in a supervisory capacity.</p> <p>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</p> <p>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</p> <p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p> <p>Ability to travel domestically and internationally.</p> <h4>Preferred qualifications</h4> <p>Knowledge of USAF or US service equivalent automated system Integrated Logistics System Supply (ILSS) policies and procedures preferred.</p> <h4>Compensation details</h4> <p>Hourly and additional incentives.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting: 04/27/2026 - Until filled.</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p>The Production Delivery Supervisor oversees the daily operations of oil field production, ensuring that safety, efficiency, and output targets are met. Key responsibilities include managing production schedules, coordinating with cross-functional teams, and ensuring adherence to both operational and HSE regulatory standards. The role involves monitoring equipment performance, troubleshooting issues, supervising field personnel, and ensuring timely and safe delivery of products. The supervisor is also responsible for implementing and enforcing HSE protocols, conducting safety audits, and leading emergency response efforts when necessary. Additionally, they play a key role in promoting a culture of safety and environmental responsibility within the team.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><h2>Main tasks and responsibilities</h2><ul><li>Provides extend well testing appraisals for production of the tight gas reservoirs in the Surface Facilities B60 - Off Plot.</li><li>Avoid excessive flaring of significant volumes of gas while predict full field production profiles.</li><li>Gather EWT data to support on the reduction Key depletion planning uncertainties identified at the outset of appraisal to a level sufficient to inform an investment decision. Ensure the EWT testing improves confidence in predictions of production profiles for the range of full field development wells.</li><li>Reveal the potential full field development design and startup concerns related to formation of hydrates due to gas expansion at the wellhead along with other potential integrity risks due to high chlorides content and the presence of minor H2S levels</li><li>Ensure the changing fluid chemistry helps in redefining the fluid basis of surface facilities design to optimize operability of the full field development.</li><li>Wells custodianship Receiving all handovers from WS (hoist), sending handovers to construction for hook up. Preparing wells handovers to WS for workover and following up with construction for un-hook &amp; re-hook up activity. In case well relates to OHL, to follow up with maintenance electrical team for power isolation/de-isolation as part of hook up</li><li>Follow up new wells hook up till walk down, attend walk down and record any punch points captured and follow up the closure of punch points. Follow up with surface equipment (VSD &amp; Surface cable) delivery and make sure that construction has marked VSD location to be offloaded correctly</li><li>Other off plot activities: Follow up with construction &amp; commissioning teams (along with support of PDTL) on TL, MSV, produced water lines, export lines/manifolds, etc and attend their walk down, PSSR &amp; commissioning. Participate in off plot shut down activities planned &amp; non-planned.</li><li>Supervise field personnel and ensure full compliance with HSE regulations. Implement and maintain HSE policies, procedures, and best practices. Conduct regular safety audits, risk assessments, and emergency drills. Promote safety awareness and lead incident investigations, providing corrective actions. Report production and HSE metrics to senior management.</li><li>Flexible to act any of off plot tasks like production delivery team lead, water section supervisor for some time if required.</li><li>Act as accountable &amp; responsible on maintaining workflow and managing to update any required documentation (handovers form, MCC, other reports). Once delegation is done a proper &amp; documented handover shall be given on time.</li></ul><h2>Key interactions</h2><ul><li>Internal: Upstream</li><li>External: Contractors, Vendors &amp; Suppliers</li></ul><h2>Notable Working Conditions</h2>Field Operations and office environment, Moderate to intensive computer screen use.<p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's in engineering, or related.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Bachelor Supervisor 5-7 years of relevant experience</li><li>Experience in relevant position in EWT (Extended Well Testing)</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Experience with well Surface Well Testing methods: Surface Test Tree, Surface Safety Valve, piping, Data Header, Choke Manifold, Heat Exchanger, 3 Phase Separator, Surge or Atmospheric Tank, Transfer Pump, Chemical Injection Pump, Emergency Shutdown System, Burner Boom/Burner Head or Flare Stack, Lab Container and Workshop.</li><li>Strong management &amp; leadership skills to lead all aspects of the Operation &amp; Maintenance process &amp; should be able to work collaboratively with all involved.</li><li>Adaptable and motivated general management strategist who relishes challenges.</li><li>Excellent interpersonal skills and multi-cultural sensitivity</li><li>Computer literate with expertise in MS Office.</li><li>EWT facility to perform</li><li>Surface Operations Off Plot</li><li>Field Production Operation</li><li>Water Treatment</li></ul>

<p><b>Role: Purchase Executive / Officer</b></p><p>Industry Type: Engineering &amp; Construction</p><p>Department: Procurement &amp; Supply Chain</p><p>Employment Type: Full Time, Temporary/Contractual</p><p>Role Category: Procurement &amp; Purchase</p><p>Education</p><p>UG: Diploma in Mechanical Engineering, B.Tech / B.E. in Mechanical Engineering</p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <p><b>Job Description</b></p> <p>Service Delivery Manager - Oilfield Chemicals</p> <p> </p> <p>Do you like working in collaborative teams and solving critical issues?</p> <p> </p> <p>Do you enjoy being part of a successful team?</p> <p> </p> <p> </p> <p> </p> <p>Join our team</p> <p> </p> <p>Our Oilfield &amp; Industrial Chemicals (OIC) business provides technologies to monitor and control our customers energy extraction assets. Our team provides technical expertise to meet client expectations. We provide customers with the peace of mind needed to reliably and efficiently improve their operations.</p> <p> </p> <p>Partner with the best</p> <p> </p> <p> </p> <p> </p> <p>As a Service Delivery Manager Oilfield Chemicals, you will be responsible for:</p> <p> </p> <p>Ensure all activities are carried out according to our non-negotiables and our cultural pillars</p> <p>Constructing business plans incorporating essential market drivers and all obtainable analytics.</p> <p>Oversee the budget and P/L for the area of responsibility</p> <p>Collaborate with sales/comms teams as well as direct interaction with customers for assigned area to understand the activity forecast (volume and complexity)</p> <p>Ensure flawless execution and on-time delivery by assigning appropriate resources in line with volume and complexity of forecasted activity and ensuring Quality plans are in line with our job cycle process</p> <p>Ensure that the team fully understand the contracts/quote for their assigned job portfolio to ensure we harvest our contracts and collect what we are owed</p> <p>Leadership to Develop team in line with competency and training programs for their respective positions as well as future career plans</p> <p>Leading and driving continuous cost-efficiency alternatives while maintaining excellence in service delivery, Preparation and handling required resources for growth including equipment.</p> <p>Fuel your passion</p> <p> </p> <p><b>To be successful in this role you will:</b></p> <p> </p> <p>Have a Bachelor's degree of Engineering.</p> <p>Have at least 10 years of experience of a technical background in Oilfield Chemicals.</p> <p>Have at least 5 years of experience in a leadership role and multi-country management</p> <p>Have excellent interpersonal and leadership skills.</p> <p>Have an excellent operational background.</p></div></section>

<p><h4>Service purpose<\/h4>\n<p>We are seeking a skilled and experienced Marine Superintendent to join our dynamic team for the MARSA LNG Bunkering Project, a key initiative within TotalEnergies' energy transition strategy. In this key role, you will oversee the safety and coordination of all marine operations in collaboration with Sohar Port Authority at the terminal and relevant Port Authorities in case of bunkering operations elsewhere. Your responsibilities will encompass LNG bunkering operations, LNG carriers loading, inspection and follow-up of terminal marine facilities, and providing expert advice on technical aspects related to terminal activities. Additionally, you will be responsible for the logistics entities and warehouse activities.<\/p>\n<p>The job holder is a part of the MARSA LNG Plant team and will report functionally to the MARSA LNG Plant Manager.<\/p>\n<p>The Marine Superintendent will provide technical leadership for marine and logistics operations, ensuring that all objectives are achieved safely, efficiently and in compliance with all applicable rules. This includes overseeing the readiness of facilities, personnel, and procedures to minimize operational risks and support a seamless production. They will ensure that all resources, including well-trained personnel and robust operational procedures, are in place to uphold safety, compliance, and operational excellence.<\/p>\n<p>During the preparation phase of the future operations, the Marine Superintendent will be based in Muscat and act as the Marine Specialist for preparation, implementation and improvement of all marine-related operations (see below scope).<\/p>\n<p>MARSA LNG Operations relies on a lean organization with multi-competencies personnel. This job description is not exhaustive and only highlights the key activities, responsibilities and accountabilities.<\/p>\n<h4>Main tasks and responsibilities<\/h4>\n<h4>Project phase (resident status - Muscat, Oman)<\/h4>\n<p><strong>Methods & standards:<\/strong><\/p>\n<ul>\n<li>Develop local marine & port operating procedures, checklists, and standards including emergency procedures, port regulations, aligning with industry best practices (ISGOTT, SIGTTO, OCIMF compliance).<\/li>\n<\/ul>\n<p><strong>Marine expertise:<\/strong><\/p>\n<ul>\n<li>As future job holder of the below mentioned \"Normal Operations Phase\" scope, prepare all marine operations related to LNG bunkering and Sohar Jetty operations.<\/li>\n<li>Provide marine expertise on the technical aspects of safe loading and berthing operations at the terminal and participate in technical discussions with all marine related stakeholders, such as but not limited to Oman Government bodies, Sohar and Muscat Port Authorities, MARSA LNG Team in Sohar, MARSA LNG Commercial Department, ship owners and specialists.<\/li>\n<\/ul>\n<p><strong>Budget & cost control:<\/strong><\/p>\n<ul>\n<li>Participate in the elaboration of the marine and logistics budget issuance and follow the associated costs.<\/li>\n<\/ul>\n<p><strong>Compliance & assurance:<\/strong><\/p>\n<ul>\n<li>Focal point for regulatory compliance and interface with internal and external stakeholders, such as local authorities, partners (OQ and TotalEnergies) and contractors for documentation.<\/li>\n<li>Collaborate with the Plant Production and Maintenance team, certification societies, and other stakeholders on compliance matters related to marine facilities, operational controls and vessel certifications.<\/li>\n<li>Assist during audits of Marine Service Providers, including Port Authorities.<\/li>\n<\/ul>\n<p><strong>Reporting & continuous improvement:<\/strong><\/p>\n<ul>\n<li>Elaborate and implement an adequate method and tools to supervise the technical performance of ship management, the audits and inspections process.<\/li>\n<li>Prepare periodic technical reports detailing LNG vessel performance.<\/li>\n<li>Elaborate a method and adequate tools to record and monitor all marine activities, including marine assurance documentation (vetting records, audit reports, incident investigations), safety performance, operational logs, and personnel training.<\/li>\n<li>Lead continuous improvement efforts across marine activities, aligning processes with company safety, efficiency, and performance goals.<\/li>\n<\/ul>\n<h4>Normal operations phase (rotation 28 days on \/ 28 days off - Sohar, Oman)<\/h4>\n<p><strong>Methods & standards:<\/strong><\/p>\n<ul>\n<li>Supervise the revision and implementation of local marine technical policies, standards, and procedures, including port regulations, aligning with industry best practices.<\/li>\n<\/ul>\n<p><strong>Marine & technical expertise:<\/strong><\/p>\n<ul>\n<li>Manage and supervise Bunkering & Loading Masters during all marine activities.<\/li>\n<li>Manage and supervise all marine operations related to LNG bunker and carrier ships in coordination with SIPC, acting as the key liaison with the Trading\/Shipping department.<\/li>\n<li>Advise the Plant Manager on the technical aspects of safe loading and berthing operations at the terminal and participate in technical discussions with ship owners and specialists to address LNG handling anomalies.<\/li>\n<li>Focal point for marine related routine operational, security and emergency issues.<\/li>\n<li>Oversee the technical performance of ship management, conducting audits and inspections and providing recommendations on spot cargo LNG carriers and other vessels as necessary.<\/li>\n<li>Assist during audit of Marine Service Providers including Port Authorities.<\/li>\n<li>Collaborate with the Plant Production and Maintenance team, certification societies, and other stakeholders on technical matters related to marine facilities operational controls and vessel certifications.<\/li>\n<li>Prepare and issue periodic technical reports detailing LNG vessel performance, identifying areas for improvement, and providing actionable recommendations.<\/li>\n<\/ul>\n<p><strong>Logistics:<\/strong><\/p>\n<ul>\n<li>Manage & supervise Site Lifting Specialist and on-site Warehouse & Logistics personnel.<\/li>\n<li>Establish and refine the company's warehousing and lifting policy and strategy to optimize manpower, equipment, and operational efficiency in line with best practices.<\/li>\n<li>Plan, develop and implement standardized procedures for managing materials, equipment, spare parts, and lifting tools essential for operations, leveraging SAP for enhanced control.<\/li>\n<li>Oversee daily warehouse and lifting activities, ensuring proper classification and safe management of stock materials using SAP systems.<\/li>\n<li>Monitor all lifting operations within the warehouse, plant premises and marine terminal to ensure compliance with safety regulations and operational standards.<\/li>\n<li>Ensure all warehouse and contractor-provided lifting equipment and accessories, such as cranes, forklifts, and rigging tools are inspected, certified and maintained to meet safety and operational standards before use on company premises.<\/li>\n<\/ul>\n<p><strong>Reporting & continuous improvement:<\/strong><\/p>\n<ul>\n<li>Maintain comprehensive records of marine, warehousing, and lifting activities, including equipment certifications, operational logs, and personnel training.<\/li>\n<li>Prepare periodic reports on inventory, lifting operations, marine activities, and safety performance to support continuous improvement initiatives.<\/li>\n<li>Collaborate with internal and external stakeholders to address technical issues and ensure the smooth execution of marine, logistics, and lifting operations.<\/li>\n<li>Lead continuous improvement efforts across marine and logistics activities, aligning processes with company safety, efficiency, and performance goals.<\/li>\n<\/ul>\n<p><strong>Compliance & assurance:<\/strong><\/p>\n<ul>\n<li>Supervise and ensure compliance with technical specifications and maintenance controls for marine facilities and logistics equipment.<\/li>\n<\/ul>\n<h4>Additional tasks<\/h4>\n<p><strong>HSE & security:<\/strong><\/p>\n<ul>\n<li>Apply and promote the company's HSE policy and local regulations, ensuring safe work practices across marine terminal, warehouse, and lifting activities.<\/li>\n<li>Participate in the investigation of incidents or near-misses related to warehousing, marine or lifting operations, the identification of root causes, the elaboration of the corrective action plan and the proper monitoring of the implementation of corrective actions to prevent recurrence.<\/li>\n<li>Ensure the application of the ISPS Code at the MARSA Terminal in collaboration with the Plant Team, ensuring proper coordination of relevant actions and surveys.<\/li>\n<\/ul>\n<p><strong>Personnel development:<\/strong><\/p>\n<ul>\n<li>Participate in maximizing the ICV (In-Country Value) during the project and operation phases by ensuring that the local marine personnel are adequately trained for operations.<\/li>\n<li>Participate in recruiting the future MARSA LNG Plant marine & logistics personnel and assess staff competency to build a capable and multi-skills workforce.<\/li>\n<li>Ensure company rules and specifications are implemented throughout the project for all production topics.<\/li>\n<\/ul>\n<h4>Additional responsibilities, as Marine Superintendent<\/h4>\n<p><strong>HSE<\/strong><\/p>\n<ul>\n<li>Adopt and demonstrate exemplary behaviour with regard to HSE, implement HSE rules and requirements within area of responsibility and ensure that required HSE competencies are within team.<\/li>\n<li>Ensure the development of key operational HSE procedures, e.g. PPE policy, risk assessment.<\/li>\n<li>Compliant with all HSE roles and regulations as per Oman law.<\/li>\n<\/ul>\n<p><strong>Personnel development & competency<\/strong><\/p>\n<ul>\n<li>Provide technical support to the recruitment and training of Marine and Logistics personnel.<\/li>\n<li>Develop the Personal Development Plan (IDPs) for Marine and Logistics Team based on the competency gap analysis. This includes on-the-job training, directing, and proper work delegation.<\/li>\n<li>Manage team performance and KPIs.<\/li>\n<li>Provide coaching and mentoring for Marine and Logistics team.<\/li>\n<li>Participate in succession planning process.<\/li>\n<\/ul>\n<p><strong>Budget & cost control<\/strong><\/p>\n<ul>\n<li>Accountable for the marine, warehouse and lifting associated costs.<\/li>\n<li>Participate in marine and logistics budget issuance and follow the associated costs.<\/li>\n<li>Participate in yearly business plan & budget.<\/li>\n<\/ul>\n<p><strong>General<\/strong><\/p>\n<ul>\n<li>Ensure company rules and specifications are implemented throughout the project for all Marine and Logistics topics.<\/li>\n<\/ul>\n<h4>Key interactions<\/h4>\n<p><strong>Internal:<\/strong> Operations, Shipping department, Procurement and Contract department, Project, Engineering, Training<\/p>\n<p><strong>External:<\/strong> SIPC, Port authority, Ships Agents, Ship master, Independent Cargo Surveyor, warehouse and lifting contractors.<\/p>\n<h4>Education requirements<\/h4>\n<p>Master mariner deep sea or equivalent (Class 1)<\/p>\n<h4>Language requirements<\/h4>\n<p>Excellent knowledge of written, read, and spoken English (required)<\/p>\n<h4>Background and experience<\/h4>\n<p><strong>Professional experience:<\/strong> Extensive experience in LNG shipping operations, terminal management, vessel berthing, cargo handling, and compliance with maritime safety and environmental regulations.<\/p>\n<p><strong>Experience in similar position (years):<\/strong> 12+ years including 5 years as Chief Officer or Master on LNG\/LPG Carriers or crude\/clean oil Carriers. Good knowledge in warehouse and lifting activities.<\/p>\n<h4>Required competencies<\/h4>\n<p>(Degree of mastery: 1: weak - 2: medium - 3: good - 4: excellent)<\/p>\n<table>\n <tr>\n <td><strong>Technical<\/strong><\/td>\n <td><strong>Soft<\/strong><\/td>\n <\/tr>\n <tr>\n <td>Port and terminal operations and interface - 4<\/td>\n <td>Management & Leadership Skills - 4<\/td>\n <\/tr>\n <tr>\n <td>Marine emergency response - 4<\/td>\n <td>Cross-functionality and resolve general complex issues - 3<\/td>\n <\/tr>\n <tr>\n <td>Management of HSE on site - 4<\/td>\n <td>Communications skills - 4<\/td>\n <\/tr>\n <tr>\n <td>Regulatory knowledge - 4<\/td>\n <td>Personnel coaching - 4<\/td>\n <\/tr>\n <tr>\n <td><\/td>\n <td>Open-mindedness & Adaptability - 4<\/td>\n <\/tr>\n <tr>\n <td><\/td>\n <td>Innovation - 3<\/td>\n <\/tr>\n<\/table><\/p><p><\/p>

<p>JOB SUMMARY Responsible verifying that operations are in compliance with hygiene and food safety standards. Advises on proper food handling practices and provides food hygiene training for all new hires and trainees. Identifies key areas of risk in various food operations and takes preemptive remedial action. Provides technical advice on product labeling issues for fulfilling government requriements.</p><p>CORE WORK ACTIVITIES</p><p>Managing Hygience and Food Safety Operations</p><p>Verifies compliance with Brand Standard Audit (BSA) requriements of Marriott International throughout the operations. Advises and monitors food handlers on the proper good handling practices and verifies their observance. Identifies key areas of risk in various food operations and takes preemptive remedial action. Verifies complianace with food and hygiene regulations, licensing conditions and codes of practice relating to food operations. Provides technical advice on product labeling issues for fulfilling government requirements. Provides in-house food hygiene training for all good handlers, (e.g. new hires and trainees). Handles complaints or enquiries from customers and local food sategey and health departments on food hygiene matters. Conducts and records daily kitchen inspections on the personal, environmental and food hygiene condictions and provides corrective action plans as necessary. Conducts regular vendor inspections in partnership with purchasing and culinary leadership. Conducts regular internal BSA inspections with culinary leadership and kitchen cleaning staff. Conducts regular inspections on the kitchen of kitchen equipment and verifies defects and non-conformities are remedied by the appropriate parties. Coordinates cleaning program in all F&amp;B areas (e.g., General clean), identifying trends and making recommendation for improvements. Establishes and maintains open, collaborative relationships with employees. Liases with pest control company for any pest issues and monitors pest control performance. Maintains and makes improvements to hygiene standards. Regularly reviews and refreshes the food safety standards of all food handlers withing the property. Maintains documentation on all hygiene and food safety stadards throughout the operation.</p><p><strong>Desired Candidate Profile</strong></p><p>Education and Experience High school diploma or GED; 2 years experience in the food and beverage, culinary, or related professional area. OR 2-year degree from an accredited university in Hotel and Restaurant Management, Hospitality, Business Administration, or related major. Preferred: Environmental Health Degree or Culinary Degree</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Mace combines construction expertise with consultancy to unlock potential in every person or project and redefine the boundaries of ambition. Our values shape the way we consult and define the people we want to join us on our journey.</span></p><br><p><span><strong>The project:</strong></span></p><br><p><span>The programme includes the development of a state-of-the-art port facility with the capacity to process millions of tonnes of bulk cargo annually, incorporating marine infrastructure, landside logistics, transportation links, utilities, and operational facilities. Scheduled for completion later this decade, the project represents one of the region's most significant port and industrial infrastructure investments.</span></p><br><p><span>This is a unique opportunity to contribute to a complex, large-scale development that will play a pivotal role in supporting economic diversification, industrial growth, and global supply chain connectivity. Candidates will have the chance to work alongside multidisciplinary teams in a dynamic environment, helping to shape a strategic piece of infrastructure with long-term regional impact.</span></p><br><p><span><strong>You’ll be responsible for:</strong></span></p><br><ul><li><span>Supervise the construction of jetties, berths, revetments, piling, and associated marine structures.</span></li><li><span>Ensure full compliance with contract requirements, technical specifications and approved design.</span></li><li><span>Maintain full-time site presence, driving safe, high-quality and on-schedule delivery.</span></li><li><span>Monitor materials and workmanship, including testing of concrete, reinforcement and structural elements.</span></li><li><span>Inspect formwork, reinforcement, and structural steel, ensuring alignment, levels and installation accuracy.</span></li><li><span>Review contractor inspection requests, approve works or raise non-conformance reports where required.</span></li><li><span>Verify precast elements meet design and quality standards.</span></li><li><span>Ensure structural tolerances are achieved across substructure and superstructure works.</span></li><li><span>Coordinate with multidisciplinary teams to ensure integration of civil provisions.</span></li><li><span>Support defect resolution during the liability period.</span></li><li><span>Works collaboratively towards the common goal of net zero carbon transition and share responsibility for the proactive identification and management of the associated carbon emissions and reductions during the delivery of work.</span></li></ul><p><span><strong>You’ll need to have:</strong></span></p><br><ul><li><span>Registered Civil Engineer with a degree in Civil Engineering (or equivalent).</span></li><li><span>15+ years’ experience, including 6+ years in port and marine construction.</span></li><li><span>Proven experience on at least two breakwater projects in a similar capacity.</span></li><li><span>Strong site supervision and quality assurance capability in marine works.</span></li><li><span>Proven consultancy background.</span></li><li><span>Effective communicator with analytical capability and ability to engage, influence and build trusted stakeholder relationships.</span></li></ul><p><span><strong>Our values</strong></span></p><br><p><span><strong>Safety first - Going home safe and well: </strong>We champion a safe, diverse, and inclusive working environment, understanding the importance of well-being in every team.</span></p><br><p><span><strong>Client focus - Deliver on our promise: </strong>We own the quality of deliverables and strategic outcomes and build long-term relationships with our clients.</span></p><br><p><span><strong>Integrity - Always do the right thing: </strong>We influence positive outcomes within our industry while always aligning with our compliance obligations.</span></p><br><p><span><strong>Create opportunity - For our people to excel:</strong> We champion a continuous improvement culture throughout all activities, inspiring our people and teams to develop.</span></p><br><p><br><span>Mace is an inclusive employer and welcomes interest from a diverse range of candidates. Even if you feel you do not fulfill all the criteria, please apply, as you may still be the best candidate for this role or another role within our organisation.</span></p><br><p><br><span>We are also open to discussing part-time, flexible, and hybrid working options if suitable within the role.</span></p><br><p><span>#LI-Onsite</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Mace combines construction expertise with consultancy to unlock potential in every person or project and redefine the boundaries of ambition. Our values shape the way we consult and define the people we want to join us on our journey.</span></p><br><p><span><strong>The project:</strong></span></p><br><p><span>The programme includes the development of a state-of-the-art port facility with the capacity to process millions of tonnes of bulk cargo annually, incorporating marine infrastructure, landside logistics, transportation links, utilities, and operational facilities. Scheduled for completion later this decade, the project represents one of the region's most significant port and industrial infrastructure investments.</span></p><br><p><span>This is a unique opportunity to contribute to a complex, large-scale development that will play a pivotal role in supporting economic diversification, industrial growth, and global supply chain connectivity. Candidates will have the chance to work alongside multidisciplinary teams in a dynamic environment, helping to shape a strategic piece of infrastructure with long-term regional impact.</span></p><br><p><span><strong>You’ll be responsible for:</strong></span></p><br><ul><li><span>Supervise the construction of breakwaters and associated marine works, ensuring full compliance with contract, design, and specifications.</span></li><li><span>Maintain full-time site presence, providing hands-on oversight of delivery and progress.</span></li><li><span>Monitor quality of materials and workmanship, including testing of concrete, rock supply and armour units</span><br><span>Verify quarry sources and ensure materials meet required standards and specifications.</span></li><li><span>Oversee installation and placement of precast armour units and underlayer profiling.</span></li><li><span>Review contractor inspection requests, approve works, or raise non-conformance reports where required.</span></li><li><span>Check lines, levels and overall construction accuracy.</span></li><li><span>Coordinate with client, contractors and wider team to ensure timely, cost-effective delivery</span></li><li><span>Support defect resolution during the liability period.</span></li><li><span>Works collaboratively towards the common goal of net zero carbon transition and share responsibility for the proactive identification and management of the associated carbon emissions and reductions during the delivery of work.</span></li></ul><p><span><strong>You’ll need to have:</strong></span></p><br><ul><li><span>Registered Civil Engineer with a degree in Civil Engineering (or equivalent).</span></li><li><span>15+ years’ experience, including 6+ years in port and marine construction.</span></li><li><span>Proven experience on at least two breakwater projects in a similar capacity.</span></li><li><span>Strong site supervision and quality assurance capability in marine works Proven consultancy background.</span></li><li><span>Effective communicator with analytical capability and ability to engage, influence and build trusted stakeholder relationships.</span></li></ul><p><span><strong>Our values</strong></span></p><br><p><span><strong>Safety first - Going home safe and well:</strong> We champion a safe, diverse, and inclusive working environment, understanding the importance of well-being in every team.</span></p><br><p><span><strong>Client focus - Deliver on our promise: </strong>We own the quality of deliverables and strategic outcomes and build long-term relationships with our clients.</span></p><br><p><span><strong>Integrity - Always do the right thing:</strong> We influence positive outcomes within our industry while always aligning with our compliance obligations.</span></p><br><p><span><strong>Create opportunity - For our people to excel:</strong> We champion a continuous improvement culture throughout all activities, inspiring our people and teams to develop.</span></p><br><p><br><span>Mace is an inclusive employer and welcomes interest from a diverse range of candidates. Even if you feel you do not fulfill all the criteria, please apply, as you may still be the best candidate for this role or another role within our organisation.</span></p><br><p><br><span>We are also open to discussing part-time, flexible, and hybrid working options if suitable within the role.</span></p><br><p><span>#LI-Onsite</span></p><br> </div>

<p>SLB Training for Employment Opportunity - Field Specialist (Production Systems)</p><p>SLB is pleased to announce a training program leading to an employment opportunity for the position of Field Specialist within the Production Systems Division. The training program will run for 18 months and is designed to develop participants' technical knowledge and practical skills in the following disciplines:</p><ul><li>Mechanical</li><li>Electrical</li><li>Instrumentation</li><li>Process Operations</li></ul><p>During the training period, trainees will receive a monthly stipend of OMR 300 to support accommodation and transportation expenses. Please note that SLB will not provide accommodation or transportation during the training period. However, all training-related costs will be fully covered by SLB.</p><p>Upon successful completion of the training program, participants will be offered a field-based role as a Field Specialist. The position will follow a 6 weeks on / 3 weeks off rotational schedule. This program offers an excellent opportunity for individuals seeking to build a rewarding career in the energy industry while gaining hands-on experience and world-class technical training with SLB.</p><p>Key Information</p><ul><li>Position: Field Specialist (Production Systems)</li><li>Training Duration: 18 months</li><li>Monthly Stipend: OMR 300</li><li>Accommodation &amp; Transportation: Not provided by SLB during training</li><li>Training Costs: Fully covered by SLB</li><li>Training Disciplines: Mechanical, Electrical, Instrumentation, and Process Operations</li><li>Post-Training Work Schedule: 6 weeks on / 3 weeks off rotation</li><li>Work Location: Field-based role</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum qualification: Bachelor or Diploma in Mechanical, Electrical, Instrumentation &amp; process engineering</p><p>Must be a job seeker</p><p>Must be an Omani National</p>

<p>SLB Training for Employment Opportunity - Field Specialist (Production Systems) SLB is pleased to announce a training program leading to an employment opportunity for the position of Field Specialist within the Production Systems Division . The training program will run for 18 months and is designed to develop participants' technical knowledge and practical skills in the following disciplines: Mechanical Electrical Instrumentation Process Operations</p><p>During the training period, trainees will receive a monthly stipend of OMR 300 to support accommodation and transportation expenses. Please note that SLB will not provide accommodation or transportation during the training period . However, all training-related costs will be fully covered by SLB .</p><p>Upon successful completion of the training program, participants will be offered a field-based role as a Field Specialist. The position will follow a 6 weeks on / 3 weeks off rotational schedule . This program offers an excellent opportunity for individuals seeking to build a rewarding career in the energy industry while gaining hands-on experience and world-class technical training with SLB.</p><h3>Key Information</h3><ul><li>Position: Field Specialist (Production Systems)</li><li>Training Duration: 18 months</li><li>Monthly Stipend: OMR 300</li><li>Accommodation &amp; Transportation: Not provided by SLB during training</li><li>Training Costs: Fully covered by SLB</li><li>Training Disciplines: Mechanical, Electrical, Instrumentation, and Process Operations</li><li>Post-Training Work Schedule: 6 weeks on / 3 weeks off rotation</li><li>Work Location: Field-based role</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum qualification: Bachelor or Diploma in Mechanical, Electrical, Instrumentation &amp; process engineering</p><p>Must be a job seeker</p><p>Must be an Omani National</p>

<p>Diagnose and repair cars, SUVs and light vehicles. Perform regular servicing and preventive maintenance. Inspect engines, brakes, suspension, steering and transmission systems. Identify mechanical faults using proper diagnostic methods. Repair or replace defective mechanical components. Perform oil changes, filter replacement and general vehicle servicing.</p><p><strong>Desired Candidate Profile</strong></p><p>Experience 2 - 4 Years</p> <p>Qualification 10th Pass</p> <p>Key Skills AUTO MECHANIC TECHNICIAN Auto Mechanic Auto Technician Assistant Auto Technician Maintenance Mechanic Motor Mechanic</p>

<p>We are seeking an experienced MEP Coordinator to join a prestigious large-scale mixed-use development project in Oman. The successful candidate will oversee the coordination, execution, and delivery of Mechanical, Electrical, and Plumbing (MEP) works throughout the project lifecycle, ensuring compliance with international standards, project specifications, quality requirements, and construction schedules. This role requires strong technical expertise, stakeholder management skills, and extensive experience working on complex mega construction projects.</p><p>Key Responsibilities</p><ul><li>Coordinate all Mechanical, Electrical and Plumbing (MEP) activities from design through construction and final handover.</li><li>Review MEP designs, drawings, technical specifications, and shop drawings to ensure compliance with project requirements.</li><li>Coordinate interfaces between consultants, contractors, suppliers, utility providers, and government authorities.</li><li>Monitor project progress, quality, safety, cost, and schedule performance for all MEP works.</li><li>Identify project risks, technical issues, and construction conflicts, implementing practical solutions to minimize delays.</li><li>Conduct regular site inspections to ensure installation works comply with approved drawings, specifications, and international standards.</li><li>Review contractor submissions, RFIs, material approvals, method statements, and inspection requests.</li><li>Support value engineering initiatives and recommend technical improvements where appropriate.</li><li>Manage post-contract matters including technical variations, claims, and coordination issues.</li><li>Ensure timely reporting of project progress, risks, and key milestones to project management.</li><li>Monitor contractor performance and ensure compliance with contractual obligations.</li><li>Support project commissioning, testing, handover, and close-out activities.</li><li>Ensure compliance with all Quality, Health, Safety and Environmental (QHSE) requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Requirements</h2><ul><li>Bachelor's Degree in Mechanical Engineering (or closely related engineering discipline).</li><li>Minimum 15 years of total experience within the construction industry.</li><li>At least 5 years' experience as an MEP Coordinator on large-scale mega construction projects.</li><li>Previous experience working within a PMC or Engineering Consultancy environment is highly preferred.</li><li>Strong experience coordinating Mechanical, Electrical and Plumbing systems across multidisciplinary projects.</li><li>Proven knowledge of project planning, construction coordination, technical reviews, commissioning, and project delivery.</li><li>Experience coordinating with consultants, contractors, government authorities, and utility providers.</li><li>Excellent understanding of international engineering standards and local construction regulations.</li><li>Strong knowledge of project management principles, risk management, quality assurance, and contract administration.</li><li>PMP Certification is considered an advantage.</li></ul><h2>Key Competencies</h2><ul><li>MEP Design &amp; Construction Coordination</li><li>Project Management</li><li>Technical Review &amp; Design Coordination</li><li>Quality Assurance</li><li>Risk Management</li><li>Vendor &amp; Contractor Management</li><li>Stakeholder Management</li><li>Construction Planning</li><li>Problem Solving</li><li>Leadership &amp; Decision Making</li><li>Communication &amp; Negotiation</li><li>Report Writing</li></ul><h2>Preferred Project Experience</h2>Candidates with experience delivering one or more of the following project types will be highly regarded:<ul><li>Mixed-use developments</li><li>Commercial buildings</li><li>High-rise developments</li><li>Hospitality projects</li><li>Residential communities</li><li>Infrastructure developments</li><li>Smart city or sustainable development projects</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Responsable de projets – Senseurs de pilotage F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Rejoignez Safran Electronics &amp; Defense et contribuez à la performance et à la fiabilité des senseurs de pilotage qui sécurisent les aéronefs civils et militaires.<br>Vous aimez piloter des projets techniques concrets, au plus près du produit et des métiers de l'ingénierie ?<br>Vous souhaitez coordonner des équipes pluridisciplinaires autour d'équipements de haute technologie, utilisés en environnement critique ?<br>Safran Electronics &amp; Defense recherche un Responsable de projets – Senseurs de pilotage (H/F) pour renforcer ses équipes.<br>En tant que responsable de projet, vous êtes au cœur de la vie série et des évolutions de nos senseurs de pilotage. Vous assurez le pilotage transverse des activités techniques, depuis la définition jusqu'aux essais et au support, en garantissant la tenue des objectifs de coûts, délais et qualité.<br>Vos principales responsabilités :<br>1. Pilotage des activités multi-métiers<br>• Animer et coordonner les différents métiers impliqués : mécanique, électronique, assurance qualité, Product Support Engineer<br>• Planifier, suivre et prioriser les travaux en cohérence avec les engagements projet.<br>• Préparer et conduire les revues d'avancement, assurer un reporting clair et synthétique.<br>2. Gestion de la définition et du référentiel produit<br>• Assurer la mise à jour des dossiers de définition.<br>• Piloter les évolutions de configuration via les mécanismes de changement.<br>• Garantir la cohérence des données techniques et documentaires associées aux activités.<br>3. Pilotage des faits techniques<br>• Centraliser et instruire les faits techniques remontés par la production, le support ou les clients.<br>• Organiser les analyses, suivre les plans d'actions et formaliser les décisions.<br>• Assurer la mise à jour des documents associés pour tracer les évolutions et les traitements.<br>4. Pilotage des essais et de la validation<br>• Préparer et orchestrer la réalisation des essais : fonctionnels, environnementaux, mécaniques, électriques, selon les besoins.<br>• Définir les plans d'essais en lien avec les experts et les laboratoires.<br>• Suivre l'exécution, analyser les résultats et rédiger les comptes rendus structurés.<br>5. Support et interface avec les parties prenantes<br>• Travailler en étroite collaboration avec la production, le support produit, la qualité, les équipes design et les chefs de projet.<br>• Assurer un rôle de point focal sur votre périmètre, capable d'expliquer les décisions techniques et les enjeux.<br>• Contribuer à la fiabilité et à la pérennité des équipements sur toute leur vie opérationnelle.</p><br><br><p>Déplacements occasionnels en centres de production à Fougères et Montluçon sont à prévoir.</p><br><br><p>• Formation Ingénieur ou Bac+5 à dominante technique (généraliste, mécatronique, électronique, mécanique…).<br>• Expérience en pilotage de lot ou de projets techniques en environnement industriel exigeant.<br>• Autonomie, polyvalence, rigueur et très bonne organisation.<br>• Excellent relationnel et aisance pour coordonner des équipes pluridisciplinaires.<br>• Compétences en électronique et/ou mécanique appréciées.<br>• À l'aise avec les outils de PLM et la rédaction de comptes rendus clairs et structurés.</p><br><br><br> </div>

<div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Ensure staff is working together as a team to ensure optimum service and that guest needs are met. Inspect grooming and attire of staff, and rectify any deficiencies. Complete opening and closing duties including setting up necessary supplies and tools, cleaning all equipment and areas, locking doors, etc. Inspect storage areas for organization, use of FIFO, and cleanliness. Complete scheduled inventories and stock and requisition necessary supplies. Monitor dining rooms for seating availability, service, safety, and well being of guests. Complete work orders for maintenance repairs.</p> <p> </p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; and serve as a role model and first point of contact of the Guarantee of Fair Treatment/Open Door Policy process. Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p> <p> </p> <p><b>PREFERRED QUALIFICATIONS</b></p> <p>Education: High school diploma or G.E.D. equivalent.</p> <p>Related Work Experience: At least 2 years of related work experience.</p> <p>Supervisory Experience: At least 1 year of supervisory experience.</p> <p>License or Certification: None</p> <p> </p> <p> </p> </div> <div> </div> <p> <i>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</i> </p>

<p>To work as a a Quantity Surveyor Civil, Mechanical, Electrical Instrument.</p><p>Conducting feasibility studies to estimate materials, time and labour costs. Preparing, negotiating and analysing costs for tenders and contracts.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor Of Engineering / Diploma of Engineering in Mechanical / Civil / Electrical. Minimum 5 years out of which 5 years in Oil &amp; Gas Gulf Experience in Post Quantity Surveyor role in Project Site. Having specialist cost management/quantity surveying consultancies within the construction Engineering &amp; Contracting Companies. Strong analytical and critical thinking skills.</p>

<p>We have openings for our prestigious client in Oman; they have openings for Fleet Supervisor &amp; QA QC Lead (Mechanical) Experience in Oil &amp; Gas Oman Location PLEASE NOTE:- 1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY. 2) GCC EXPERIENCE IS A MUST. If interested, please send CV &amp; documents on EMAIL_ADDRESS Please provide below details:- Post Applied:- Current Company:- Current Location:- Current Salary:- Expected Salary:- Total years of Exp:- No of years Gulf Exp:- Notice Period:- Passport number:- Passport Expiry date:- Highest Qualifications:- Date of Birth:- Age:- Below is the open positions: - A) Fleet Supervisor. a) Minimum 5 years of experience as Fleet / Transport Supervisor. B) QA QC Lead (Mechanical). 1) Degree / Diploma in Mechanical Engineering. 2) More than 10 years of experience in Engineering QA/QC work in Petrochemical / Refinery / Oil &amp; Gas or Power Generation industry 3) English language read, write and speaking to IELTS level 4 or equivalent 4) Able to work with computers, work, excel &amp; windows. 5) Knowledgeable on different pipe, gaskets and bolting materials. 6) Knowledgeable on different welding techniques and their quality requirements. 7) Be a qualified welding inspector 8) Able to qualify WPSs and welders 9) Certified ASNT NDT Level II with sound working knowledge of the various NDT techniques 10) Be qualified to interpret radiographs 11) Experienced in ISO 9001:2000 including auditing 12) Develop and implement inspection and test plans 13) Develop and implement QA/QC procedure and ensure activity at the site are as per approved method statement &amp; inspection test plan. 14) Carry out the role of Radiation Safety Officer 15) Set up and maintain quality documents archive 16) Coordinate with the company for inspection &amp; resolution of any quality problem including the closures of Non-Compliance report 17) Manage all QA/QC documents of the contract scope including certificates, Calibrations, test result, inspection request, non-compliance reports &amp; site instruction/observations, permanent material delivered and other QA/QC documents 18) Ensure closure of non-conformance, NCR &amp; site instructions 19) Implement the quality management standards and practices to ensure compliance to the quality scope requirements. 20) Leads inspections recommendations &amp; continuous improvement programs to improve quality, control costs and maintain reliability. 21) Good interpersonal &amp; communication skills 22) Demonstrable leadership, decision making &amp; analytical thinking skills. Please inform your friends &amp; colleagues for the same. Warm Regards, Vinayak Thakkar - Assistant Manager - Recruitment AMExemplar Services Branches: - Surat (HO) | Navi Mumbai | Oman | UAE Mobile: - PHONE_NUMBER Email id: - EMAIL_ADDRESS Website: - www.exemplarworld.com</p><p><strong>Desired Candidate Profile</strong></p><p>1) CANDIDATES SHOULD HAVE EXP IN OIL &amp; GAS / PETROCHEMICAL / REFINERY. 2) GCC EXPERIENCE IS A MUST.</p><p>A) Fleet Supervisor. a) Minimum 5 years of experience as Fleet / Transport Supervisor.</p><p>B) QA QC Lead (Mechanical). 1) Degree / Diploma in Mechanical Engineering. 2) More than 10 years of experience in Engineering QA/QC work in Petrochemical / Refinery / Oil &amp; Gas or Power Generation industry 3) English language read, write and speaking to IELTS level 4 or equivalent 4) Able to work with computers, work, excel &amp; windows. 5) Knowledgeable on different pipe, gaskets and bolting materials. 6) Knowledgeable on different welding techniques and their quality requirements. 7) Be a qualified welding inspector 8) Able to qualify WPSs and welders 9) Certified ASNT NDT Level II with sound working knowledge of the various NDT techniques 10) Be qualified to interpret radiographs 11) Experienced in ISO 9001:2000 including auditing 12) Develop and implement inspection and test plans 13) Develop and implement QA/QC procedure and ensure activity at the site are as per approved method statement &amp; inspection test plan. 14) Carry out the role of Radiation Safety Officer 15) Set up and maintain quality documents archive 16) Coordinate with the company for inspection &amp; resolution of any quality problem including the closures of Non-Compliance report 17) Manage all QA/QC documents of the contract scope including certificates, Calibrations, test result, inspection request, non-compliance reports &amp; site instruction/observations, permanent material delivered and other QA/QC documents 18) Ensure closure of non-conformance, NCR &amp; site instructions 19) Implement the quality management standards and practices to ensure compliance to the quality scope requirements. 20) Leads inspections recommendations &amp; continuous improvement programs to improve quality, control costs and maintain reliability. 21) Good interpersonal &amp; communication skills 22) Demonstrable leadership, decision making &amp; analytical thinking skills.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Leadership</strong>&nbsp;</p><br><p>1. Build teamwork and enhance the team’s commitment to their work and the hotel.&nbsp;</p><br><p>2. Delegate appropriate responsibility to others based on their ability whilst ensuring they have sufficient authority and resources.</p><br><p>&nbsp;3. Achieve a record of success in recruiting, interviewing and hiring people.(“Getting the right person in the right job”)</p><br><p>&nbsp;4. Communicate the vision and brand personality to the team and ensure it is integrated in the department’s business practices.&nbsp;</p><br><p>5. Actively and successfully train people for current assignments and future growth.&nbsp;</p><br><p>6. Set and communicate high performance standards.&nbsp;</p><br><p>7. Recognize outstanding individual performance in the department and deal with substandard performance fairly, immediately and constructively.&nbsp;</p><br><p>8. Ensure all employees under your supervision are scheduled in accordance with business needs.&nbsp;</p><br><p><strong>Budgeting and Finance</strong></p><br><p>&nbsp;1. Prepare the annual business plan for all F&amp;B outlets.&nbsp;</p><br><p>2. Monitor the outlets’ budget and proactively implement corrective action where necessary.</p><br><p>&nbsp;3. Control cost whilst ensuring guests get value for money.&nbsp;</p><br><p><strong>Communication</strong></p><br><p>&nbsp;1. Communicate effectively within the organization at all levels using the most appropriate communication method for the matter concerned.&nbsp;</p><br><p>2. Conduct regular brief, concise, well prepared departmental meetings and ensure follow-up.&nbsp;</p><br><p><strong>Other</strong></p><br><p>&nbsp;1. Adjust to changes in job requirements and the hotel’s operational strategies to meet business needs.</p><br><p>&nbsp;2. Maintain an efficient and effective administrative system.&nbsp;</p><br><p>3. Continue professional development by self-directed learning and participation in company sponsored training programs.</p><br><p>&nbsp;4. Keep abreast of developments affecting your field of expertise.&nbsp;</p><br><p><strong>Technical Expertise</strong></p><br><p>&nbsp;1. Plan and recommend replacement of FF&amp;E and OE in accordance with needs and available budget.</p><br><p>&nbsp;2. Attain the highest banquet yield achievable.</p><br><p>&nbsp;3. Ensure the correct implementation of all cash-handling procedures in the departments under your supervision.</p><br><p>&nbsp;4. Ensure banquet, buffet set-up and banquet function themes are creative and in accordance with the hotel’s image.</p><br><p>&nbsp;5. Constantly seek to profit engineer by monitoring cost of sales and implementing revenues-increasing products/programs activities.&nbsp;</p><br><p>6. Work together with Marketing Communications to achieve high impact exposure of the hotel’s F&amp;B facilities in the market.</p><br><br><b>Qualifications:</b><br><ul><li><p><span>Minimum 4 years of experience in a Food &amp; Beverage management role, preferably within luxury hotels, resorts, or upscale hospitality environments.</span></p><br></li><li><p><span>Bachelor's Degree in Hospitality Management, Hotel Management, Business Administration, or a related field is preferred</span></p><br></li><li><span>Strong knowledge of luxury hospitality service standards and Food &amp; Beverage operations.</span></li><li><span>Strong commercial acumen with a proven track record of increasing F&amp;B sales and profitability.</span></li><li><span>Proficiency in F&amp;B management systems, POS systems, and other relevant hospitality software.</span></li><li><span>Excellent communication, leadership, and interpersonal skills.</span></li><li><span>Highly presentable, professional, and guest-focused.</span></li><li><span>Outgoing and energetic personality with strong relationship-building abilities.</span></li><li><span>Strong organizational, analytical, problem-solving, and decision-making skills.</span></li><li><span>Fluency in English; additional languages will be an advantage.</span></li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br>Job Description</p><br><p><b>Field Specialist – Drilling &amp; Completion Fluids </b></p><br><p><b>Are you an experienced Drilling &amp; Completion Fluids Engineer looking for a new challenge?</b><br><b>Do you enjoy being part of team that provides high-quality engineering for our customers?</b><br>&nbsp;</p><br><p><b>Be part of a successful team</b><br>Our Drilling Fluids business provides intelligent, connected technologies to support, monitor and control drilling processes. We provide innovative solutions across multiple geographies. Providing customers with the excellent solutions needed to reliably and efficiently improve their operations.<br>&nbsp;</p><br><p><b>Partner with the best</b><br>As a Field Specialist - Drilling &amp; Completion Fluids, you will provide on site services by measuring, testing and supervising the running of fluid mixing and pumping, including technical analysis and specific product and practical recommendations for controlling fluid properties under broad direction.</p><br><p><b>As a Field Specialist - Drilling &amp; Completion Fluids, you will be responsible for:</b></p><br><ul><li>Providing onsite services by measuring, testing, and supervising the running of fluid mixing and pumping.&nbsp;</li><li>Maintaining fluid properties at rig sites by accurately testing.&nbsp;</li><li>Managing inventory at customer well sites.&nbsp;</li><li>Ensuring effective customer service by keeping rig-site customers informed and creating solutions to problems.&nbsp;</li><li>Being trained in the prevention and cure of Lost Circulation and stuck pipe&nbsp;&nbsp;</li><li>Conducting sales calls at the field level or accompany Sales Representatives.&nbsp;</li><li>Assisting operations in providing customers with effective and environmentally safe drilling fluids.&nbsp;</li><li>Conducting all business activities in line with Baker Hughes policies</li></ul><p><b>Fuel your passion</b></p><br><p>To be successful in this role you will:</p><br><ul><li>Have a relevant bachelor's degree</li><li>Have 3-5 years of experience with Drilling &amp; Completion Fluids</li><li>Have basic product line knowledge.&nbsp;</li><li>Demonstrated industry experience.</li><li>Have demonstrated industry experience.&nbsp;</li><li>Have strong teamwork skills.</li></ul><p><b>Work in a way that works for you</b><br>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. Talk to use for your preferred working arrangement during interview.</p><br><p><br><b>Working with us</b><br>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.<br>&nbsp;</p><br><p><b>Working for you</b><br>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input.&nbsp; Join us, and you can expect:<br>Contemporary work-life balance policies and wellbeing activities</p><br><ul><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li>Tailored financial programs</li><li>Additional elected or voluntary benefits</li></ul>The Baker Hughes internal title for this role is: FIELD SPEC II - FLD </div>