Fire Fighting EngineerJobs

<p><h4>Position summary</h4> <p>Patrol all areas of the property; assist guests with room access. Monitor closed circuit televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests/employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest/employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all security/loss prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents/thefts. Call for assistance using proper code responses. Complete a loss prevention shift summary/daily activity report. Maintain confidentiality of all security/loss prevention and property reports/documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties.</p> <p></p><p></p>

<p><h4>Position summary</h4> <p>Patrol all areas of the property; assist guests with room access. Monitor closed circuit televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests/employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest/employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all security/loss prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents/thefts. Call for assistance using proper code responses. Complete a loss prevention shift summary/daily activity report. Maintain confidentiality of all security/loss prevention and property reports/documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties.</p> <p>Follow</p><p></p>

<p><strong>� We're Hiring: Utility DCS Operator</strong></p><p>We're looking for an experienced <strong>Utility DCS Operator</strong> to join our operations team. If you have hands-on experience operating <strong>DCS-based utility systems</strong> in a continuous process, chemical, polymer, or power plant environment, we'd like to hear from you.</p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Independently operate and monitor large DCS-based utility systems during shift operations.</p></li><li><p>Operate, monitor, and troubleshoot utility systems, including:</p><ul><li><p>Air Compressors & Air Distribution</p></li><li><p>Nitrogen Generation (PSA & Pure Nitrogen)</p></li><li><p>Chilled Water Systems</p></li><li><p>Demineralized (DM) Water Systems</p></li><li><p>Steam Generation & Distribution</p></li><li><p>Heating Media (HTM) Systems</p></li><li><p>Cooling Tower Systems</p></li><li><p>Natural Gas Systems</p></li><li><p>HVAC/Air Conditioning Systems</p></li><li><p>Fire Hydrant & Fire Protection Systems</p></li></ul></li><li><p>Monitor equipment performance, record operational data, and prepare performance reports.</p></li><li><p>Coordinate equipment start-up and shutdown activities with the production team.</p></li><li><p>Maintain high standards of housekeeping across utility areas.</p></li><li><p>Ensure compliance with HSE policies, government regulations, and ISO 9001/ISO 14001 documentation requirements.</p></li><li><p>Work effectively both independently and within a team environment.</p></li></ul><p><strong>Requirements:</strong></p><ul><li><p>Hands-on experience operating DCS-based utility systems in continuous process industries such as chemical, polymer, power, or manufacturing plants.</p></li><li><p>Strong troubleshooting and operational knowledge of utility equipment.</p></li><li><p>Good understanding of safety, quality, and environmental management systems.</p></li><li><p>Willingness to work in rotating shift operations.</p></li></ul><p><strong>If you're a skilled utility professional looking for your next opportunity, we'd love to hear from you. Apply now and become part of a dynamic operations team!</strong></p><p><strong>Desired Candidate Profile</strong></p><ul><li><p>High school diploma or equivalent, with vocational training in utility management or a related field preferred.</p></li><li><p>Minimum of 3 years of hands-on experience in a utility operation or relevant industrial environment.</p></li><li><p>Certification in water treatment or waste management is highly desirable, showcasing commitment to industry standards.</p></li><li><p>Experience with SCADA systems and process control technology is essential for efficient operational management.</p></li></ul>

<p><h4>Position summary</h4> <p>Patrol all areas of the property; assist guests with room access. Monitor closed circuit televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests/employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest/employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all security/loss prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents/thefts. Call for assistance using proper code responses. Complete a loss prevention shift summary/daily activity report. Maintain confidentiality of all security/loss prevention and property reports/documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties.</p> <p>Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs; assist</p><p></p>

<p><h4>Position summary</h4> <p>Patrol all areas of the property; assist guests with room access. Monitor closed circuit televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests and employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest and employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all security and loss prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents or thefts. Call for assistance using proper code responses. Complete a loss prevention shift summary and daily activity report. Maintain confidentiality of all security, loss prevention, and property reports and documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties.</p> <p>Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs;</p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>1. Welding Production Supervision</strong></p> <ul> <li>Supervise day-to-day welding activities on shop floor including:</li> <ul> <li>Structural welding (jackets, topsides, decks)</li> <li>Fit-up and joint preparation</li> </ul> <li>Ensure welding is carried out as per:</li> <ul> <li>Approved WPS (Welding Procedure Specification)</li> <li>Applicable drawings and weld maps</li> </ul> </ul> <p><strong>2. Work Planning &amp; Execution</strong></p> <ul> <li>Execute work as per daily/weekly plans issued by planning team.</li> <li>Ensure readiness of:</li> <ul> <li>Materials</li> <li>Welding consumables</li> <li>Equipment and tools</li> <li>Qualified welders</li> </ul> <li>Allocate work to welders based on skill and qualification.</li> </ul> <p><strong>3. Workforce Supervision</strong></p> <ul> <li>Supervise welders, fitters, and helpers.</li> <li>Monitor manpower productivity and efficiency.</li> <li>Ensure proper discipline and work execution at site.</li> </ul> <p><strong>4. Quality Compliance</strong></p> <ul> <li>Ensure proper fit-up and joint preparation before welding.</li> <li>Coordinate with QA/QC inspectors for:</li> <ul> <li>Fit-up inspection</li> <li>Visual inspection</li> <li>NDT clearance</li> </ul> <li>Rectify welding defects and monitor repair work.</li> </ul> <p><strong>5. Welding Consumables &amp; Equipment</strong></p> <ul> <li>Ensure correct usage of welding consumables (electrodes, wires, gases).</li> <li>Monitor proper handling of:</li> <ul> <li>Electrodes (baking &amp; holding)</li> <li>Consumables storage</li> </ul> <li>Ensure welding machines and equipment are in working condition.</li> </ul> <p><strong>6. Productivity Monitoring</strong></p> <ul> <li>Track welding progress (joints completed, inch-dia, tonnage).</li> <li>Achieve production targets as per schedule.</li> <li>Identify delays and take corrective measures.</li> </ul> <p><strong>7. Safety Compliance</strong></p> <ul> <li>Ensure adherence to HSE requirements:</li> <ul> <li>Hot work permits</li> <li>Fire prevention measures</li> <li>Safe welding/gas cutting practices</li> </ul> <li>Conduct toolbox talks and enforce safe work practices.</li> </ul> <p><strong>8. Coordination</strong></p> <ul> <li>Coordinate with:</li> <ul> <li>Planning team (work targets and priorities)</li> <li>QA/QC team (inspection readiness)</li> <li>Stores (consumables availability)</li> <li>Engineering (clarifications)</li> </ul> </ul></div></section>

<p>Provide strong / robust engineering support in all aspects of Safety for all assigned sites under TL Central Safety scope s; through (1) Critically assessing RPI Safety performance, (2) Developing strategic and operational safety plans and processes, and (3) Designing and implementing safety systems, procedures, and equipment that are integrated into the design of a product or system adopting the industry best practices and safety compliance within OQ System (HSE), and (4) ; identifying and analyzing potential safety hazards and developing solutions to mitigate or eliminate them, in order to ensure that systems meet safety standards and regulations.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><ul><li>Critically assessing RPI Safety performance,</li><li>Developing strategic and operational safety plans and processes,</li><li>Designing and implementing safety systems, procedures, and equipment that are integrated into the design of a product or system adopting the industry best practices and safety compliance within OQ System (HSE),</li><li>Identifying and analysing potential safety hazards and developing solutions to mitigate or eliminate them,</li><li>Ensure that systems meet safety standards and regulations</li><li>Technical and Engineering support for all sites and plants and facilities including Terminal, and any other location in terms of project and development.</li><li>Take a lead in the development and implementation of Safety objectives, policies, processes, strategies, tactics, and standard operating procedures (SOP) to ensure all relevant procedural/legislative requirements are fulfilled.</li><li>Work in conjunction with various departments to assure implementation of HSE Management System.</li><li>Accountable for development and communication of all safety aspects of the OQ RPI periodical HSSE / Sustainability Performance Letter and Report.</li><li>Work in conjunction with other specialists to develop and monitor annual Safety Targets, identifying business impacts and developing control strategies that ensure the company goal of continuous improvement is managed and delivered.</li><li>Based on RPI HSE performance and industry direction develop strategic safety plans that effectively integrate into the overall OQ HSSE strategic plan.</li><li>Work in conjunction with Safety, Environment, and Fire Services Departments, focusing on the P.D.C.A. continual improvement cycle, to develop operational plans that can be practically executed by others within OQ.</li><li>Establish network with HSE Committee, Trade Associations, and Regulatory Authorities as applicable, at all RPI sites/locations align with Communication Department.</li><li>Develop and take ownership of all safety aspects of the RPI HSEMS.</li><li>Lead/participate in all critical incident investigations as required, providing necessary technical expert advice that supports the identification of system causes and sustainable rectification measures.</li><li>Work in conjunction with Fire Services &amp; Environment Department, ensuring all serious potential safety risks, and issues are considered and effectively mitigated.</li><li>Provide advice &amp; support for major/minor Projects and changes to facilities, to ensure all safety risks are identified and mitigated appropriately.</li><li>Understands MOC (Management of Change) process and provides technical advice on safety aspects as needed.</li><li>Provide technical support for Hazard, Risk Assessment, and Impact Assessment studies for facility expansions or as needed.</li><li>Expert in contractor management system to ensure the company requirement is followed by the contractors.</li><li>Well versed with risk assessment methodologies (QRA, HAZOP, HAZID, What-If etc) and give expert advice accordingly.</li><li>Take a lead on implementation of ISO certifications (ISO 9001, 14001, 45001)</li><li>Audit/verify reports to ensure accurate reporting, problem solving, hazard identification and to take necessary precautions</li><li>Supervises the preparation of timely and accurate Safety reports which conform to Company and department requirements, policies, and standards</li><li>Prepare technical material for Safety Trainings and assure capability from HSE Trainer to deliver all trainings as per HSE Training Matrix.</li><li>Develop safety competency criteria and training materials that ensure effective execution and improved competency for all relevant personnel.</li><li>Guide team through an effective culture change focus on meeting HSSE objectives.</li><li>Well versed with Safety software s to support HSE related data development &amp; further analysis.</li><li>Provide required mentoring and coaching to team member to develop their competencies and skill as per department plan.</li><li>Any other tasks assigned by line manager to achieve department objectives.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Within the department and plant personnel up to Managers level and other RPI functions/departments and Contractors</li><li>External: SIPC, ROP, Service Providers, Consultants</li></ul><p><strong>Notable Working Conditions</strong>. Field Operations and office environment, Moderate to intensive computer screen use.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>6-8 years of relevant experience</li><li>Experience in Oil and Gas industry preferable in Refinery, Petrochemical, and Petroleum processes.</li><li>Knowledge of main Safety procedures</li><li>Experience in the field of managing Safety aspects in Petrochemical, Oil &amp; Gas industries.</li><li>Fundamentals of HSSE - Comprehensive knowledge of occupational safety. Detailed understanding of general industry standards and the requirements of the more frequently referenced standards. Includes deep knowledge of basic safety concepts such as hazard and risk assessment, personal protective equipment, behaviour-based safety, machine/ equipment safety, confined space entry, etc.</li><li>Occupational Health &amp; Safety Management System-</li><li>Experience in HSE audits.</li><li>Knowledge of ISO 45001 and RC14001.</li><li>Knowledge of risk management methods and practices.</li><li>Knowledge of HAZOP or similar studies.</li><li>Detail knowledge about contractor HSSE Management procedure.</li><li>Thorough understanding on Incident Management.</li><li>Thorough understanding of HSSE performance management process.</li><li>Through experience on HSSE Training program development and management.</li><li>Through experience on Permit to Work Process.</li><li>Knowledge on Oman regulations pertaining to HSSE.</li><li>Soft:</li><li>People management</li><li>Planning and organizing</li><li>Communication</li><li>Integration</li><li>Presentation</li><li>Analytical thinking</li><li>Record keeping</li><li>Persuasive Communication</li><li>Coaching</li><li>Technical:</li><li>Proficiency in M/S Office</li><li>Quantitative &amp; Qualitative Risk Assessment (QRA)</li><li>Evidence searches and analysis</li><li>Ability to review, engineering documents, P&amp;ID, PFD</li><li>HAZOP &amp; HAZID</li><li>Root cause analysis</li><li>Investigations, Reporting, Documentation</li><li>Technical writing,</li><li>Establishes priorities and works with minimal direction.</li><li>Self-motivated and uses initiative and judgment to attain the best results.</li><li>Ability to prepare, update and draft policies, procedures and guidelines</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>PipeCare Group of companies has been helping the customers ensure the integrity of their pipeline and facility assets for over 20 years. PipeCare Group is looking for an experienced Team Leader [Operations] who will lead the team of field Project workers and making sure that the Project work is executed in a safe, effective and efficient manner in line with the time, resources and financial planning.</p><p>Key Responsibilities &amp; Authorities</p><ul><li>Prepare, sign and submit pigging, daily, express and other relevant reports</li><li>Discuss equipment and tools requirements including auxiliaries, AGM's, DGPS, magnets, launching trays, spares, tool box and all other required tools for use in the field, etc.</li><li>Study and analyze project information document, operation manuals, pigging procedures and other project-related documents</li><li>Establish professional contact with client s field personnel creating friendly working relations</li><li>Manage and develop the team to execute field work in a safe, effective and efficient manner in line with time, resource and financial planning.</li><li>Is authorized to stop execution of any work at site if it is unsafe or may create unsafe work conditions.</li><li>Coordinate field activities between the team, subcontractor, client and other involved parties.</li><li>Visit client s sites (site kick-off meetings, field surveys, risk assessment review meetings, etc.).</li></ul><p>Skills/Experience:</p><ul><li>Degree in Engineering (Mechanical or relevant) plus 3 years of operation planning experience</li><li>Experience in Oil and Gas sector, preferably with ILI exposure</li><li>Computer skills in Microsoft word, excel and outlook at an intermediate level</li><li>Fluency in English, the language of the Territory is an advantage</li><li>Ability to travel extensively</li></ul><p>Physical and Mental Requirements:</p><ul><li>Lifting and Carrying: Ability to lift and carry up to 50 pounds.</li><li>Mobility: Must be able to walk and climb to perform duties, including maneuvering within a refinery or plant environment and accessing elevated platforms via ladders and stairwells.</li><li>Communication: Sufficient clarity of speech and hearing, or other communication capabilities, to communicate effectively.</li><li>Focus and Multitasking: Ability to maintain focus and multitask effectively.</li><li>Safety Equipment: Must be able to wear safety equipment as required by the safety department for personal protection, if/where needed in manufacturing environments.</li><li>Personal Mobility and Reflexes: Sufficient personal mobility and physical reflexes, with or without reasonable accommodations, to perform office duties and travel to off-site locations when necessary.</li></ul><p>What we do:</p><p>In-Line Inspection Services</p><p>PIPECARE provides In-Line Inspection Services to locate, identify, and size threats, supporting integrity management requirements.</p><p>Check out our AI Technology and other cutting-edge technologies by clicking the following YouTube Links:</p><p>PIPECARE Group - YouTube</p><p>SMART AI CALIPER - Inspection experience like never befor e</p><p>Inspection Technologies</p><ul><li>Magnetic Flux Leakage (MFL): Detects and sizes general corrosion and metal loss anomalies, especially circumferentially oriented.</li><li>Transverse Field Inspection (TFI): Detects and sizes general corrosion and metal loss anomalies, primarily axially oriented.</li><li>Ultrasound (UT): Detects and sizes general and other metal loss anomalies with high depth sizing accuracy.</li><li>Ultrasonic Crack Detection: Detects and sizes cracks and colonies of cracks.</li><li>Caliper (Geometry): Detects and sizes deviations in the ideal circular shape of a pipeline (dents, ovalities, wrinkles, etc.).</li><li>Specialized Tools and Technologies</li><li>Combo Tools: Use multiple measurement systems in various combinations.</li><li>Specialized Tubing Technologies: Designed for Furnace and Downhole Operations.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Degree in Engineering (Mechanical or relevant) plus 3 years of operation planning experience</li><li>Experience in Oil and Gas sector, preferably with ILI exposure</li><li>Computer skills in Microsoft word, excel and outlook at an intermediate level</li><li>Fluency in English, the language of the Territory is an advantage</li><li>Ability to travel extensively</li></ul><p>Physical and Mental Requirements:</p><ul><li>Lifting and Carrying: Ability to lift and carry up to 50 pounds.</li><li>Mobility: Must be able to walk and climb to perform duties, including maneuvering within a refinery or plant environment and accessing elevated platforms via ladders and stairwells.</li><li>Communication: Sufficient clarity of speech and hearing, or other communication capabilities, to communicate effectively.</li><li>Focus and Multitasking: Ability to maintain focus and multitask effectively.</li><li>Safety Equipment: Must be able to wear safety equipment as required by the safety department for personal protection, if/where needed in manufacturing environments.</li><li>Personal Mobility and Reflexes: Sufficient personal mobility and physical reflexes, with or without reasonable accommodations, to perform office duties and travel to off-site locations when necessary.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span>We're recruiting an Operations Manager for one of our clients,&nbsp;<span><span><span><span>a hospitality group based in Muscat, Oman.</span></span></span></span></span><br><br><b><span>About Our Client</span></b><br><br></span><p><span><span><span><span><span><span>Our client is a well-known hospitality group based in Muscat, Oman, known for delivering high-quality dining experiences and exceptional service standards. The organization operates with a strong focus on culinary excellence, guest satisfaction, and innovation, offering a diverse range of concepts that cater to both local and international audiences.</span></span><br></span></span></span></span></p><br><b><span>Key Responsibilities:</span></b><br><br><p><span><span><b>Strategy, Planning &amp; Execution</b></span></span></p><br><ul><li><span><span><span>Lead strategy and planning, and ensure consistent and timely execution across all stores</span></span></span></li><li><span><span><span>Ensure consistency in the execution of all standards, policies, and procedures</span></span></span></li><li><span><span><span>Develop, standardize, and continuously improve SOP frameworks</span></span></span></li><li><span><span><span>Ensure strict adherence to operational, food safety, hygiene, and service standards</span></span></span></li><li><span><span><span>Manage franchise-franchisor communication and ensure compliance with franchisor requirements</span></span></span></li><li><span><span><span>Drive continuous improvement in operational systems, audits, quality controls, and digital initiatives</span></span></span><br></li></ul><span><span><span><b>Operations Management</b><br></span></span></span><br><ul><li><span><span><span>Manage end-to-end daily operations</span></span></span></li><li><span><span><span>Maintain operational readiness always during business hours</span></span></span></li><li><span><span><span>Ensure proper billing, prevent revenue leakage, and maintain transaction accuracy</span></span></span></li><li><span><span><span>Ensure all equipment, machines, and assets are properly maintained</span></span></span></li><li><span><span><span>Report operational issues to management</span></span></span></li></ul><p><span><span><b>Team Management</b></span></span></p><br><ul><li><span><span><span>Plan, recruit, and select staff in coordination with HR and Management</span></span></span></li><li><span><span><span>Train, lead, and motivate employees to ensure team performance and minimize staff turnover</span></span></span></li><li><span><span><span>Conduct performance reviews, identify training needs, and initiate development programs</span></span></span></li><li><span><span><span>Handle employee grievances and maintain workplace harmony</span></span></span></li></ul><p><span><span><b>Quality Assurance &amp; Customer Experience</b></span></span></p><br><ul><li><span><span><span>Maintain a warm, welcoming, and hospitable culture</span></span></span></li><li><span><span><span>Ensure consistency in product quality, presentation, portion sizes, and service standards</span></span></span></li><li><span><span><span>Handle customer complaints efficiently and with the highest level of attention</span></span></span></li><li><span><span><span>Ensure customer online feedback is monitored</span></span></span></li></ul><p><span><span><b>Inventory Management</b></span></span></p><br><ul><li><span><span><span>Monitor inventory control, ordering patterns, par levels, and stock accuracy</span></span></span></li><li><span><span><span>Reduce waste and variances, and ensure proper stock rotation</span></span></span></li><li><span><span><span>Manage vendor performance and ensure procurement costs efficiencies</span></span></span></li></ul><p><span><span><b>Compliance, Hygiene &amp; Safety</b></span></span></p><br><ul><li><span><span><span>Ensure compliance with local municipality, food safety, and regulatory requirements</span></span></span></li><li><span><span><span>Implement proper SOPs and checklists for cleanliness, pest control, safety checks (equipment, fire, gas, and electrical), and risk management</span></span></span></li><li><span><span><span>Maintain audit readiness and implement corrective action plans</span></span></span><br></li></ul><span><span><span><br><b>Sales &amp; Profitability</b><br></span></span></span><br><ul><li><span><span><span>Achieve monthly and annual sales targets</span></span></span></li><li><span><span><span>Monitor daily sales reports and cash handling</span></span></span></li><li><span><span><span>Implement strategies to increase average bill value through upselling, combo offers, and promotional campaigns</span></span></span></li><li><span><span><span>Monitor profit margins, optimize resource utilization, and control operational costs</span></span></span></li><li><span><span><span>Prepare daily, weekly, and monthly reports and share them with Management<br></span></span><br></span></li></ul><br><span>Requirements</span><ul><li><span><span><span>Bachelor’s degree in Hotel Management, Hospitality, or Business Administration<br></span></span></span></li><li><span><span><span>Minimum 10+ years of experience in multi-unit operations management<br></span></span></span></li><li><span><span><span>Solid understanding of business financials, digital platforms, hospitality standards, food safety requirements, customer service excellence, and industry best practices<br></span></span></span></li><li><span><span><span>Proficiency in POS systems, inventory management platforms, and operational reporting tools<br></span></span></span></li><li><span><span><span>Strong leadership, team management, and customer-focused mindset<br></span></span></span></li><li><span><span><span>Strong focus on quality, consistency, standards, and a high level of planning and execution</span></span></span><br></li><li><span><span><span>Fluency in both Arabic and English is preferred.<br></span></span></span></li></ul><br><span>Benefits</span><ul><li><span><span><span><span>Competitive Salary</span></span></span></span><br></li><li><span><span><span><span>​Employee Benefits as per the Oman Labor Law</span></span></span></span><br></li></ul><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare tag-wise Completion Management Plan and link equipment tags with applicable&nbsp;<strong>A-ITRs, B-ITRs, and C-ITRs</strong>.</p></li><li><p>Review SLDs, process block diagrams, and perform system boundary markups.</p></li><li><p>Prepare and maintain system completion dossiers and handover documentation.</p></li><li><p>Ensure closure of construction activities for&nbsp;<strong>CCC</strong>&nbsp;and verify readiness for&nbsp;<strong>MCC</strong>.</p></li><li><p>Identify, categorize, and track punch list items:&nbsp;<strong>A, B, and C</strong>.</p></li><li><p>Plan and execute pre-commissioning and commissioning activities.</p></li><li><p>Witness testing, calibration, electrical checks, energization readiness, and functional testing.</p></li><li><p>Commission equipment and systems including motors, pumps, HVAC, STP, fire systems, telecom, and electrical systems.</p></li><li><p>Prepare commissioning procedures, checklists, reports, and test records.</p></li><li><p>Coordinate with vendors, client commissioning team, construction, QA/QC, HSE, and operations.</p></li><li><p>Participate in&nbsp;<strong>PSSR</strong>&nbsp;and ensure safety systems, interlocks, and emergency systems are operational.</p></li><li><p>Ensure all documentation, approvals, and certificates are completed for final handover.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Degree or Diploma in Electrical, Mechanical, Instrumentation, or related Engineering discipline.</p></li><li><p>Minimum&nbsp;<strong>10+ years of experience</strong>&nbsp;in systems completion, pre-commissioning, commissioning, and handover activities.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>JOB PURPOSE:</b></p><p>Identify/understand and execute the exact scope of work from specification, commercial tender, worklist and on-board identification, highlighting the actual work identified compared to the tender. To provide a completion program, prepare materials, and supervise all types of structural/hull fabrication, installation, refurbishment, and repair activities for all types of ship repair projects. Responsibilities include building new Ships, Floating production storage and offloading, Floating Storage and Regasification Unit conversion, and all kinds of Oil Rig projects. Executions of all relevant activities shall be in accordance with the project-agreed timelines, quality plan, and HSE standards established within ADC.</p><p><b>KEY ACCOUNTABILITIES:</b></p><p><b>Description</b></p><p><b>Supervision of Subordinates</b></p><ul><li>Organize and supervise the activities and work of subordinates to ensure that departmental work is carried out efficiently and consistently with operating policies and procedures</li><li>Provide on-the-job training and constructive feedback to subordinates to support their overall development</li><li>Supervise the Structural/Hull fabrication process and handling of materials to ensure the activities are completed according to timelines, budget man hours, and approved standards practices</li><li>Responsibilities include project execution, including maintaining quality standards, cost-effectiveness and time management to ensure projects are on time and within budget</li></ul><p><b>Day-to-Day Operations</b></p><ul><li>Schedules  Review scheduling and planning charts and documents and perform periodical inspections of the work site to track the progress of hull jobs such as dimensions, specifications and steel cutting and provide necessary guidance on the resolution of related issues to guarantee all hull job issues are resolved on time and to confirm high-quality deliverables.</li><li>Prepare the budget of the activities (Man- hour)</li><li>Prepare the schedule for the critical Activities according to the master schedule from SRM</li><li>Open the working code for additional activities</li><li>Monitor and control the activity time (tracking the progress) and reporting</li><li>Monitor and control the activities budget and prepare the reports</li><li>Monitor and control the consumable and preparation report (coils)</li><li>Streamline and finalize the KPI indicators for the Hull Fabrication department</li><li>Analyze project profit (in terms of MHR) and suggest areas of improvement</li><li>Document project WCR /Analysis report/Lessons learnt/welding coil consumption analysis etc.</li><li>Document 5weeks plan monitoring</li></ul><p><b>Resources Control</b>  </p><ul><li>Coordinate with the Production Control department and provide input on the planning of resources and budget required for hull activities to ensure the plan created considers all activities’ requirements</li><li>Oversee the monitoring and control of materials, equipment and manpower resources in the Hull department and continuously update the Production Control department to highlight any inconsistencies or deviations in the plan well in advance, allowing for pan modification and appropriate action taken</li><li>Liaise with the Contract and Procurement department for equipment to be purchased for hull activities based on the engineers recommendations to ensure the latest tools and technology are used</li></ul><p><b>Quality Control</b>  </p><ul><li>Ensure adherence to and maintenance of the quality of Hull Fabrication activities to ensure readiness for quality control inspections</li></ul><p><b>Progress Updates and Documentation</b>  </p><ul><li>Ensure that all activities findings of the department and production updates are reported to the Department Head –using the agreed format so that critical events and potential delays are timely and accurately communicated for prompt action, thus minimizing impact on overall schedules</li><li>Review, manage and ensure the development of relevant hull activities documentation, progress challenges and issues faced to ensure timely and accurate availability for any future reference and to ensure timely resolution of escalated issues</li></ul><p><b>Technical Advice and Troubleshooting</b>  </p><ul><li>Provide technical advice to subordinates on department-related matters to support them in achieving their jobs and to internal departments (e.g. – Production Engineers’) to provide them with feedback and recommendations for future improvement based on technical issues faced in manufacturing</li></ul><p><b>Continuous Improvement</b>  </p><ul><li>Motivate subordinates and contribute to the identification of opportunities for continuous improvement of systems, processes and practices, considering leading practices, improvement of processes and productivity improvement  </li></ul><p><b>Policies, Systems, Processes &amp; Procedures</b>  </p><ul><li>Implement approved Hull departmental policies, processes and procedures, provide instructions to subordinates and monitor their adherence so that work is carried out in a controlled manner  </li></ul><p><b>Quality, Health, Safety, &amp; Environment</b>  </p><ul><li>Ensure compliance to all relevant quality, health, safety and environmental management policies, procedures and controls across the department to guarantee employee safety, delivery of high- quality products/services and a responsible environmental attitude  </li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in industrial engineering/ mechanical engineering/ electrical engineering/ Naval Architecture or equivalent</li><li>10 years of relevant experience in Jib cranes and switchgears, heavy lifting equipment, generators, CNC Machines and PLC, drives and other workshop facilities in shipyard or heavy industries</li><li>Understanding of general mechanical drawing, mechanical process and sequence drawing</li><li>Communication and interpersonal skills</li><li>Leadership skills</li><li>Analytical thinking skills, Project Management skills</li></ul><p></p></section>

<p><br></p><p>The Bar Supervisor is responsible for, but not limited to, supervising the service in the bar venue. To provide back up for the Assistant Restaurant Manager, take responsibility for supervising and coordinating the daily bar activities and maintaining the highest standard of service established by the hotel.</p><p>Responsibilities</p><ul><li>Display full knowledge of food and beverage and dining venue offering.</li><li>Ensure colleagues start and finish shifts at the correct time.</li><li>Assist in setting up bar for all meal periods.</li><li>Assist colleagues in setting up bar service stations according to MEP standards.</li><li>Be familiar with all billing procedures.</li><li>To handle all banqueting area relevant equipment.</li><li>Attend daily meetings.</li><li>Attend all mandatory training sessions arranged by MO.</li><li>Act as a hotel ambassador always.</li><li>To carry out any additional duties requested by management, related to hotel operational activities</li><li>Follow the principle of the 5Ps Proper Planning Prevents Poor Performance at all times.</li><li>Ensure correct quality, presentation and delivery of all drinks.</li><li>Perform all administrative tasks designated to him/her by management.</li><li>Supervise F&amp;B service by directing and supporting his/her subordinates.</li><li>Ensure that the bar area is adequately staffed during his/her shift and to notify his/her superior of any shortages.</li><li>Identify and carry out any specific training and development needs among the team.</li><li>Support company's philosophy and company culture through the use of Legendary Quality Experiences on a daily basis to ensure Guest Satisfaction and the achievement of our Mission Statement.</li><li>Support company's philosophy and company culture through the use of Guiding Principles and D.E.L.I.G.H.T as part of ensuring Guest Satisfaction and the achievement of our Mission Statement.</li><li>Taking reservations accurately where necessary while keeping track of guest s preferences.</li><li>Greeting and seating guests according to MO standards.</li><li>Presenting the menu correctly to each guest.</li><li>Offering suggested up-selling based on outlet policy.</li><li>Serving beverages according to MO standards.</li><li>Assist colleagues in clearing plates and tables and ensuring general table maintenance throughout the meal.</li><li>Presenting the bill and handle payment procedures.</li><li>Ensure guest satisfaction at all times and proactively seek feedback.</li><li>Handling special requests from guests and VIPs.</li><li>Implement service recovery actions and follow up.</li><li>Bidding guests farewell when leaving the venue.</li><li>Anticipating the guests needs by keeping control of service flow and identify potential bottle necks.</li><li>Ensure that hotel grooming and hygiene standards are being maintained, enhancing a professional image.</li><li>Ensure that the environment of the outlet is being maintained to MO standards.</li><li>Be aware of, and comply with, safe working practices as laid down under FLHSS. This will include your awareness of any specific hazards at your workplace.</li><li>Be aware of and comply with local and relevant Food Hygiene Standards.</li><li>Wear any appropriate protective clothing provided by or recommended by the Hotel.</li><li>Report any defects in the building, plant or equipment according to the Hotel procedures.</li><li>Ensure any accidents to colleagues, guests or visitors are reported in accordance with Hotel procedures.</li><li>Attend all statutory fire training and to be fully conversant with and abide by all rules concerning, fire, health &amp; safety.</li><li><br></li></ul><p><strong>Desired Candidate Profile</strong></p><p><br></p><p>About the job</p><p>The Bar Supervisor is responsible for, but not limited to, supervising the service in the bar venue. To provide back up for the Assistant Restaurant Manager, take responsibility for supervising and coordinating the daily bar activities and maintaining the highest standard of service established by the hotel.</p><p>Responsibilities</p><ul><li>Display full knowledge of food and beverage and dining venue offering.</li><li>Ensure colleagues start and finish shifts at the correct time.</li><li>Assist in setting up bar for all meal periods.</li><li>Assist colleagues in setting up bar service stations according to MEP standards.</li><li>Be familiar with all billing procedures.</li><li>To handle all banqueting area relevant equipment.</li><li>Attend daily meetings.</li><li>Attend all mandatory training sessions arranged by MO.</li><li>Mandarin Oriental, Muscat has zero tolerance on all forms of harassment or discrimination, i.e. it is strictly forbidden to discriminate on the basis of gender, disability, including physical or medical condition, race, colour, religion, national origin, ancestry, citizenship, age, sexual orientation, marital status, or for any other reason.</li><li>Act as a hotel ambassador always.</li><li>To carry out any additional duties requested by management, related to hotel operational activities</li><li>Follow the principle of the 5Ps Proper Planning Prevents Poor Performance at all times.</li><li>Ensure correct quality, presentation and delivery of all drinks.</li><li>Perform all administrative tasks designated to him/her by management.</li><li>Supervise F&amp;B service by directing and supporting his/her subordinates.</li><li>Ensure that the bar area is adequately staffed during his/her shift and to notify his/her superior of any shortages.</li><li>Identify and carry out any specific training and development needs among the team.</li><li>Support company's philosophy and company culture through the use of Legendary Quality Experiences on a daily basis to ensure Guest Satisfaction and the achievement of our Mission Statement.</li><li>Support company's philosophy and company culture through the use of Guiding Principles and D.E.L.I.G.H.T as part of ensuring Guest Satisfaction and the achievement of our Mission Statement.</li><li>Taking reservations accurately where necessary while keeping track of guest s preferences.</li><li>Greeting and seating guests according to MO standards.</li><li>Presenting the menu correctly to each guest.</li><li>Offering suggested up-selling based on outlet policy.</li><li>Serving beverages according to MO standards.</li><li>Assist colleagues in clearing plates and tables and ensuring general table maintenance throughout the meal.</li><li>Presenting the bill and handle payment procedures.</li><li>Ensure guest satisfaction at all times and proactively seek feedback.</li><li>Handling special requests from guests and VIPs.</li><li>Implement service recovery actions and follow up.</li><li>Bidding guests farewell when leaving the venue.</li><li>Anticipating the guests needs by keeping control of service flow and identify potential bottle necks.</li><li>Ensure that hotel grooming and hygiene standards are being maintained, enhancing a professional image.</li><li>Ensure that the environment of the outlet is being maintained to MO standards.</li><li>Be aware of, and comply with, safe working practices as laid down under FLHSS. This will include your awareness of any specific hazards at your workplace.</li><li>Be aware of and comply with local and relevant Food Hygiene Standards.</li><li>Wear any appropriate protective clothing provided by or recommended by the Hotel.</li><li>Report any defects in the building, plant or equipment according to the Hotel procedures.</li><li>Ensure any accidents to colleagues, guests or visitors are reported in accordance with Hotel procedures.</li><li>Attend all statutory fire training and to be fully conversant with and abide by all rules concerning, fire, health &amp; safety.</li><li><br></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Patrol all areas of the property; assist guests with room access. Monitor Closed Circuit Televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests/employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest/employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all Security/Loss Prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents/thefts. Call for assistance using proper code responses. Complete a Loss Prevention shift summary/daily activity report. Maintain confidentiality of all Security/Loss Prevention and property reports/documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties.</p><p>Stand, sit, or walk for an extended period of time. In addition, some states may have additional licensing/registration requirements to be considered for this position. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Enter and locate work-related information using computers and/or point of sale systems. Move at a speed required to respond to work situations (e.g., run, walk, jog). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: High school diploma or G.E.D. equivalent.</p><p>Related Work Experience: No related work experience.</p><p>Supervisory Experience: No supervisory experience.</p><p>License or Certification: None</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>About GE Vernova GE Vernova is a planned, purpose-built global energy company that includes Power, Wind, and Electrification businesses and is supported by its accelerator businesses of Advanced Research, Consulting Services, and Financial Services. Building on over 130 years of experience tackling the world s challenges, GE Vernova is uniquely positioned to help lead the energy transition by continuing to electrify the world while simultaneously working to decarbonize it. GE Vernova helps customers power economies and deliver electricity that is vital to health, safety, security, and improved quality of life. GE Vernova is headquartered in Cambridge, Massachusetts, U.S., with more than 80,000 employees across 100+ countries around the world. GE Vernova s Gas Power business engineers advanced, efficient natural gas-powered technologies and services, along with decarbonization solutions that aim to help electrify a lower carbon future. As part of the Gas Power One Field Services team, FieldCore installs, maintains and upgrades power generation equipment, enabling operators of the world s energy infrastructure to provide more reliable and affordable energy. Job Summary: A TFA FEP is an entry level position. You will start by being enrolled in FieldCore s Field Engineering Program (FEP). While in the FEP, you will develop in-depth technical expertise, lean thinking and leadership skills and will have a unique opportunity to go through: In-person and Online training Curriculum On-the-job trainings Learning from experienced Technical Field Advisors (TFA s) You will gain experience and grow your career while traveling and helping provide power to communities. Upon successful graduation from the FEP program, you will be eligible for a TFA position. The TFA travels to customer sites and supports customers with installation, maintenance, and warranty work with industrial power generation rotating equipment (Gas/Steam turbines). This position requires technical competence in reading and interpreting electrical/mechanical flow and instrument diagrams, dial and laser alignment and thermal growth equipment. Implements and executes the work under safety and environmental policies, serving as an example for others and provide full and active commitment in the deployment of the EHS Policies and any additional project-specific written statement or procedure. Essential Duties &amp; Responsibilities: Manage, perform, coordinate the management of site activities Perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation Respond to requests for emergency repairs and services to troublesome equipment Provide technical instruction and assistance to customer representatives regarding installation, operation, calibration, repair, and maintenance at customer's sites Perform administrative functions such as: writing technical reports, ordering materials, securing quotations, preparing job status reports, reports to customers, time sheet and expense sheets on a complete timely, and thorough basis Signs off on all changes implemented Drive customer satisfaction through commitment to quality Maintain strong safety mindset to assure the executed work reflects the technical requirements within GE safety standards Knowledge to troubleshoot and provide routine maintenance checkout for wide range of equipment vintage Coach, mentor, and train other team members as required, to impart and perpetuate field engineering and/or product knowledge Prepare timely and accurate technical reports for customer records and a reference for future outages Ensure all parts needed for the job are shipped to the site Perform walk-downs during installation to ensure that the customer s contractors are working properly Perform aftermarket upgrades that need to be performed at the site level Ability and willingness to work holidays, weekends and overtime as required by field assignments Extensive travel to and from projects and various field assignments will be required May be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values. Ability and willingness to work holidays, weekends and overtime as required by field assignments Manage and develop employees</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Required Qualifications &amp; Experience : Technical/University degree or qualifying experience OR a High School Diploma / GED with a minimum of 4 years of experience in a Field Services role 3+ years of experience in a field services or power generation equipment maintenance position Strong technical competence in reading and interpreting electrical/mechanical flow and instrument diagrams dial and laser alignment and thermal growth equipment Extensive travel to and from projects and various field assignments will be required English proficiency required Desired Characteristics: Introductory level. Most new hires with little experience on the GE Product will start in this level. Participates in on-the-job training. Experience and training on Alstom, Siemens, or other OEM equipment Extensive Field Engineering Services experience Strong organizational and project management skills Strong oral and written interpersonal, communication, and leadership skills Strong business acumen and ability to sell GE products to the customer</p><p></p></section>

<p><h4>Job summary</h4> <p>The Fuels Manager (FM)/Alternate Site Manager (ASM) provides leadership and guidance to fuels department personnel. Responsible for the overall program management of fuels assets. Manages asset receipts, accountability, serviceability, storage, security, periodic inspections, and deployment. Establishes asset reconstitution production schedules to meet United States Air Forces Central (USAFCENT) requirements. Reviews asset reconstitution production, periodic maintenance, and inventory reports to ensure timely and accurate submissions to USAFCENT A4/RF. Provides guidance on environmental issues as they relate to fuel assets. Responsible for program quality assurance as part of ISO 9000 standards. The ASM portion of the position coordinates and oversees the day-to-day operations, maintenance, personnel, and services at assigned location ensuring quality to the customer as directed by Site Manager.</p> <h4>Job duties & responsibilities</h4> <ul> <li>Primary liaison between Amentum sites and USAFCENT on issues pertaining to fuels.</li> <li>Oversees reconstitution and preservation plan for fuels based upon requirements and the Performance Work Statement (PWS), including calibration of meters, gauges and tools, functional testing of pumping systems, and hydrostatic testing of fuel hoses.</li> <li>Tracks fuels deployments, ensuring timely delivery of assets.</li> <li>Answers inquiries from program management and sites concerning various requests from the USAF and external agencies.</li> <li>Attends staff meetings and provides management reports and briefings, as required.</li> <li>Provides assistance, guidance, and coordination on revisions of fuels maintenance actions in response to changes in Air Force publications, technical orders, and the PWS.</li> <li>Oversees product quality deficiency reports from submission to resolution.</li> <li>Creates, coordinates, implements, and revises fuels standard operating procedures, work instructions, and training plans, as required.</li> <li>Conducts periodic staff assistance visits to all sites.</li> <li>Performs other duties and TDY travel as directed by management.</li> <li>Performs duties of Site Manager in Site Manager’s absence.</li> <li>Manages basic support services and accompanying labor force for assigned location.</li> <li>Manages small team of U.S. nationals supervising skilled, semi-skilled foreign and local nationals.</li> <li>Ensures that all requirements are met as defined in the Performance Work Statement.</li> <li>Communicates new requirements, concerns, and issues to PMO for resolution.</li> <li>Ensures that requirements are met for employee health, morale, and welfare.</li> <li>Ensures that employees adhere to the Armed Forces and host nation standards of conduct concerning in-theater operations.</li> <li>Effectively manages any employee management issues that may arise.</li> <li>Closely supervises equipment and material within assigned area of responsibility.</li> <li>Closely supervises the arrival, retrofit, and upgrade of equipment and material as assigned.</li> <li>Conducts the weekly and monthly collection of data for quality input to PEBs or AFEB.</li> <li>Submits timely reports required by the United States Government.</li> <li>Conducts regular property inventories.</li> <li>Performs other duties as assigned.</li> </ul> <h4>Management responsibility</h4> <ul> <li>Provides functional management for fuels issues program wide.</li> <li>Manages day-to-day operations as assigned by Site Manager.</li> <li>Performs Site Manager duties in Site Manager’s absence.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Ability to communicate effectively both verbally and in writing. Capable of organizing data quickly and effectively. Able to prepare and execute briefings.</li> <li>Knowledge of the USAF maintenance management system, including OLVIMS required.</li> <li>Knowledge of the maintenance and operating procedures for Fuels Operational Readiness Capability Equipment (FORCE) desired.</li> <li>Knowledge of fuels industrial safety, quality, environmental procedures, material deficiency reporting, and the USAF supply system required.</li> <li>Proficiency in Microsoft software applications required, particularly MS Outlook, PowerPoint, Excel, Word, etc.</li> <li>Knowledgeable and able to supervise all aspects of assignment of qualified personnel, scheduling workload, developing programs and procedures to satisfy customer requirements, coordinating with on-base support, preparing official correspondence, evaluating improvement suggestions, and knowledge of chain of command and protocol.</li> <li>Compliance with fire, safety, and environmental protection requirements.</li> <li>Background displaying ability to staff, organize, lead and manage a diverse workforce larger than five people, particularly foreign nationals (FNs).</li> <li>Willingness to travel and work in various locations in the world.</li> <li>Willingness to work shifts and extended hours in support of 24/7 operations.</li> <li>Willingness to learn about the cultural, economic, geopolitical, and/or military issues of the Middle East and/or Arab-speaking countries within that region desired.</li> <li>Ability to exercise discretion and make effective decisions.</li> <li>Solid communication skills, strong interpersonal skills.</li> <li>Strong ability to work as a member of a diverse, dynamic team.</li> <li>Outstanding problem-solving skills and sound judgment.</li> <li>Must be capable of obtaining a flight line driver license when required by COR.</li> <li>Must be capable of obtaining HAZMAT certifications as required by the PWS and/or host nation.</li> </ul> <h4>Experience & education</h4> <ul> <li>The Fuels Manager shall have a minimum of six (6) years of specialized experience in fuels hydrant operations and maintenance of bulk petroleum storage terminals.</li> <li>The FM/ASM shall have a minimum of three (3) years of experience in logistics, project management, operations management or facilities management/maintenance field.</li> <li>As a minimum, the Fuels OM&R Manager shall have two (2) years of supervisory experience in fuel hydrants operations with emphasis in operations and environmental compliance.</li> <li>Must be able to obtain and maintain a SECRET US Government Clearance. Note: US Citizenship is required to obtain a SECRET Clearance.</li> <li>Must have a high school diploma or equivalent.</li> <li>Bachelor’s degree preferred but not required.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Works in normal office environment and as required outside and/or in fuel facilities.</li> <li>Living and working conditions at the assignment location could be remote and uncomfortable.</li> <li>Long hours, exposure to weather and hazardous conditions.</li> <li>Personnel should be aware of moving on short notice and under adverse conditions.</li> </ul> <h4>Travel / other</h4> <ul> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Disclaimer</h4> <p>The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.</p> <h4>Compensation details</h4> <p>TBD</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Patrol all areas of the property; assist guests with room access. Monitor Closed Circuit Televisions, perimeter alarm system, duress alarms, and fire life safety system. Lock property entrances when required. Conduct daily physical hazard inspections. Respond to accidents, contact EMS or administer first aid/CPR as required. Assist guests/employees during emergency situations. Notify appropriate individuals in the event of accidents, attacks, or other incidents. Defuse guest/employee disturbances. Call for outside assistance if necessary. Complete incident reports to document all Security/Loss Prevention related incidents. Handle all interruptions and complaints. Resolve safety hazard situations. Escort any unwelcome persons from the property without interrupting the orderly flow of property operation. Report to scenes of vehicle accidents/thefts. Call for assistance using proper code responses. Complete a Loss Prevention shift summary/daily activity report. Maintain confidentiality of all Security/Loss Prevention and property reports/documents; release information only to authorized individuals. Conduct investigations and gather evidence. Conduct interviews with relevant parties.</p> <p> </p> <p>Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests service needs; assist individuals with disabilities; thank guests with genuine appreciation. Speak with others using clear and professional language; prepare and review written documents accurately and completely. Develop and maintain positive working relationships with others; support team to reach common goals. Comply with quality assurance expectations and standards. Stand, sit, or walk for an extended period of time. In addition, some states may have additional licensing/registration requirements to be considered for this position. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Enter and locate work-related information using computers and/or point of sale systems. Move at a speed required to respond to work situations (e.g., run, walk, jog). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p> <p> </p> <p>PREFERRED QUALIFICATIONS</p> <p>Education: High school diploma or G.E.D. equivalent.</p> <p>Related Work Experience: No related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: None</p> <p> </p> <p> </p> </div> <div> </div> <p><br></p></div></section>

<p>Coordinating purchasing for the Kitchen and stewarding departments with the finance team as per the hotel procedures Conduct interviews for candidates in the department in conjunction with Human Resources and prepare job descriptions Daily monitoring of the Food Cost to ensure monthly targets are achieved without undermining the agreed product quality Adhere to and monitor departmental operating expenses as per departmental budget and forecast. Review and monitor departmental work schedules, oversee that departmental payroll is in line with budgets. Assist the Food &amp; Beverage Manager with the preparation and conversion on departments promotions calendar Co Ordinate together with Food &amp; Beverage Operations with changing programmes and promotions according to seasonality In conjunction with the Food &amp; Beverage Manager coordinate with Sales and Marketing so that all Food and Beverage Marketing collateral is prepared in advance Ensure that staff scheduling is done effectively and in line with business demands and posted seven (7) days in advance Ensure all menus are accurately costed, have standard recipes and presentation photos All new menu items to include service staff education and tasting Full compliance with local municipality HACCAP standards and certification. In conjunction with the Food &amp; Beverage Manager look at new potential revenue streams including outside catering opportunities.</p><p>Operations: Train and develop the kitchen and stewarding team in the departmental operating standards Ensure all kitchen team members are aware of the a.l.c Housekeeping &amp; Handyman services available to guests and are skilled in up selling them as a preferred supplier Maintain a consistent focus on improving the overall flow of the kitchen operations, seeking ways to maximize and improve the operation through productivity management and energy savings programs To lead and support employees in the achievement of financial, operational and service delivery targets via effective organizational policy and procedural development and appropriate employee training activities Foster a winning, solution-oriented work environment, motivating and engaging employees to continuously deliver the best possible service and to provide feedback and suggestions To lead daily departmental briefings and monthly employee meetings To have a complete understanding of and to adhere to M venpick Hotels &amp; Resorts policy relating to Fire, Hygiene, Health and Safety. To drive the performance of the kitchen and stewarding team members, including completion of performance appraisals, coaching counselling and performance management in conjunction with Human Resources Ensure the team work within the department with a sales focused attitude and team are aware of sales opportunities within the hotel which will assist with the maximization of revenue. Ensure all team members are aware of all F&amp;B revenue targets as well as food cost targets, and are kept informed of performance results. Ensure guests are communicated with and assisted in an efficient, warm and professional manner by all team members.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Full compliance with local municipality HACCAP standards and certification.</li><li>Train and develop the kitchen and stewarding team in the departmental operating standards</li><li>Ensure all kitchen team members are aware of the a.l.c Housekeeping &amp; Handyman services available to guests and are skilled in up selling them as a preferred supplier</li><li>Maintain a consistent focus on improving the overall flow of the kitchen operations, seeking ways to maximize and improve the operation through productivity management and energy savings programs</li><li>To lead and support employees in the achievement of financial, operational and service delivery targets via effective organizational policy and procedural development and appropriate employee training activities</li><li>Foster a winning, solution-oriented work environment, motivating and engaging employees to continuously deliver the best possible service and to provide feedback and suggestions</li><li>To lead daily departmental briefings and monthly employee meetings</li><li>To have a complete understanding of and to adhere to M venpick Hotels &amp; Resorts policy relating to Fire, Hygiene, Health and Safety.</li><li>To drive the performance of the kitchen and stewarding team members, including completion of performance appraisals, coaching counselling and performance management in conjunction with Human Resources</li><li>Ensure the team work within the department with a sales focused attitude and team are aware of sales opportunities within the hotel which will assist with the maximization of revenue.</li><li>Ensure all team members are aware of all F&amp;B revenue targets as well as food cost targets, and are kept informed of performance results.</li><li>Ensure guests are communicated with and assisted in an efficient, warm and professional manner by all team members.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Electrical Inspector is responsible for inspecting and monitoring electrical installation works to ensure compliance with approved drawings, technical specifications, quality standards, and project requirements. Conducts site inspections of power distribution, lighting, low-current systems, and related electrical infrastructure, verifies installation quality, identifies non-conformances, and coordinates with contractors and consultants to ensure works are completed safely and in accordance with applicable codes, standards, and regulations.</p><br><br><p>Hill International, with more than 4,300+ professionals in over 100 offices worldwide, provides program management, project management, construction management, project management oversight, advisory, facilities management, and other consulting services to clients in a variety of market sectors. Engineering News-Record magazine recently ranked Hill as one of the largest program management firms in the world. For more information on Hill, please visit our website at&nbsp;www.hillintl.com.</p><br><p>Hill is exclusively a program, project, and construction management provider, meaning we have one focus as a company: protecting client interests. Free of any potential conflicts, our entire business is geared towards helping clients achieve their desired outcomes. We are dedicated to exceeding expectations throughout the entire construction project lifecycle and adapt to the needs of each assignment to develop tailored approaches and solutions to meet those needs.</p><br><p>Hill is a GISI Consulting Group company, part of the Global Infrastructure Solutions, Inc. (GISI) family of companies. Learn more about GISI Consulting Group at&nbsp;www.gisiconsulting.com.</p><br><p><b>Hill International is an Equal Opportunity Employer/Veteran/Disabled</b><br><u>Note</u>:&nbsp;<i>This job description is intended to provide an indication of the nature and levels of work, knowledge, skills, abilities and other essential functions to be carried out as part of fulfilling the role mentioned in the job title. Various other duties as required.</i></p><br><br>Responsibilities:<br><ul><li><p><span><span>Inspect installation of LV/MV electrical systems, conduits, panels, and terminations.</span></span></p><br></li><li><p><span><span>Ensure compliance with approved electrical drawings and specifications.</span></span></p><br></li><li><p><span><span>Verify IRs are aligned with work completion and readiness for inspection.</span></span></p><br></li><li><p><span><span>Monitor correct installation of cable trays, earthing systems, and devices.</span></span></p><br></li><li><p><span><span>Ensure fire alarm, data, lighting control, and power systems meet quality standards.</span></span></p><br></li><li><p><span><span>Witness testing and commissioning activities including insulation resistance, continuity, and grounding.</span></span></p><br></li><li><p><span><span>Raise NCRs and track rectification measures related to electrical works.</span></span></p><br></li><li><p><span><span>Coordinate closely with mechanical and architectural inspectors on shared spaces and false ceiling areas.</span></span></p><br></li><li><p><span><span>Ensure adherence to local electrical codes (e.g., IEC, NEC) and safety regulations.</span></span></p><br></li><li><p><span><span>Document and report inspection findings and contractor performance.&nbsp;</span></span></p><br></li><li><p><span><span>Perform other duties as assigned by the line manager/supervisor.</span></span></p><br></li></ul><br>Qualifications:<br><ul><li><span><span>Diploma or Degree in Electrical Engineering.</span></span></li><li><span><span>7+ years of inspection experience in complex projects (theme parks, hospitals, or airports preferred).</span></span></li><li><span><span>Familiarity with ride systems, show lighting, and life safety electrical systems is a plus.</span></span></li><li><span><span>Strong understanding of testing protocols and international electrical standards.</span></span></li></ul> </div>

<p><h4>Starting date:</h4> <p>ASAP</p> <h4>Duration:</h4> <p>10 months onshore at the yard in Sohar, Oman, followed by 3–6 months offshore in Qatar</p> <h4>Principal responsibilities</h4> <p>To ensure safety of commissioning activities, with good coordination with other parties involved, and in respect with company regulations.<br> To manage and supervise pre-commissioning and commissioning activities in a safe and professional manner performed by a team of supervisors and technicians and ensure a smooth transfer of the facilities to the company operations team in compliance with the company standards within the priorities defined.<br> To be the technical referent for all matters related to his trade and provide solutions to technical issues.</p> <h4>HSE</h4> <p>Demonstrate HSE leadership by promoting HSE and quality policy and procedures to all personnel within the work environment in line with company HSE rules.<br> Conduct all activities in a safe and efficient manner in accordance with company policies, standards, and procedures.<br> Ensure implementation within commissioning team of project standing instructions related to LOTO and authorizations by relevant authority.<br> Ensure that all accident, incident, and near miss are reported in a factual and professional way and that evidence is available for further investigations.<br> Ensure all PTW/JSA requirements are met for any activity and prepare as required.<br> Participate in the client safety performance program and training.</p> <h4>Technical requirements</h4> <h4>Commissioning preparation:</h4> <p>Manage preparation of commissioning according to the responsibility matrix in respect with company methodology (OPERCOM) and all applicable company specifications - task identification, procedures, requirements for tools, vendors, equipment, manpower and ensure that these resources will be mobilized in time.<br> Ensure interface with the project team to integrate the commissioning schedule to the overall project schedule.<br> Ensure the preparation of system limit drawings.<br> Ensure the preparation of commissioning test procedures for approval and identify resource requirements for its performance.<br> Populate or supervise as required the completion database (ICAPS) in his trade.<br> Approve, follow, record and test all software modifications with the approval from the company.</p> <h4>Commissioning execution:</h4> <p>Ensure interfaces and requirements between commissioning team and contractor construction team in his trade.<br> Lead the sub-system completion walkdowns for his trade.<br> Lead and coordinate pre-commissioning and commissioning activities in his trade (loop testing, control panels energization and testing, functional tests, troubleshooting and support to other disciplines, assistance to start-up and operations teams, etc.).<br> Participate in and validate the site acceptance tests for his trade.<br> Supervise the vendor(s) activities related to his trade.<br> Consolidate the commissioning red-line marked-up drawings for his trade.<br> Produce, witness and track punch list items.</p> <h4>Reporting:</h4> <p>Ensure all documentation is filed and updated in the completion dossiers for his trade.<br> Report daily activities and progress in his trade to client’s representative.<br> Prepare technical reports and presentations as required.</p> <h4>Experience / qualifications</h4> <ul> <li>15+ years of experience onshore and/or offshore commissioning within the oil and gas industry.</li> <li>Experience with oil treatment and storage facilities.</li> <li>Very strong knowledge in his trade systems (LV, HV, power generator, transformers, switchboards, earthing, UPS and batteries, PMS/ECS, etc.) and technical documentation (PFD, P&ID, single line diagrams, etc.).</li> <li>Demonstrate a high level of awareness of safe working practices associated with the design, construction, pre-commissioning, commissioning, installation and start-up of oil and gas facilities in his trade.</li> <li>Demonstrate HSE leadership and proactive approach.</li> <li>Sound knowledge of various completions management systems.</li> <li>Ability to troubleshoot and to resolve issues in a timely and professional manner.</li> <li>Ability to develop cooperative working relationships and to promote teamwork.</li> <li>Ability to effectively communicate with relevant stakeholders relating to the project, including contractors and other project entities.</li> <li>Excellent communication and written skills (in English) and ability to work with different disciplines and cultures.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job Purpose:</strong> Lead and manage HR and administrative functions, ensuring alignment with company objectives, compliance with regulations, and the development of a high-performance culture. Oversee recruitment, talent management, employee relations, organisational development, and efficient administrative operations.</p><p><strong>Tasks and Responsibilities:</strong></p><p><strong>Human Resources Leadership:</strong></p><ul><li>Develop and implement HR strategies aligned with business objectives.</li><li>Oversee recruitment, on boarding, and talent retention.</li><li>Manage performance appraisal and employee development processes.</li><li>Promote employee engagement and a positive workplace culture.</li><li>Ensure compliance with labor laws, regulations, and company policies.</li></ul><p><strong>Talent Development and Succession Planning:</strong></p><ul><li>Identify training needs and implement employee development programs.</li><li>Develop and execute succession plans for key positions.</li><li>Support leadership development and future talent pipelines.</li><li>Implement Omanisation plans in line with organisational targets.</li></ul><p><strong>Employee Relations:</strong></p><ul><li>Serve as the primary contact for employee relations matters.</li><li>Resolve workplace conflicts fairly and effectively.</li><li>Promote a positive work environment through effective communication and employee support.</li></ul><p><strong>Compensation and Benefits Management:</strong></p><ul><li>Oversee compensation, benefits, and payroll administration.</li><li>Conduct market benchmarking to maintain competitive reward programs.</li><li>Ensure accurate and timely salary and benefits processing.</li></ul><p><strong>Administration Leadership:</strong></p><ul><li>Manage administrative functions and ensure efficient office operations.</li><li>Oversee facilities, assets, and office resources to maintain safety and productivity.</li><li>Ensure proper maintenance and accountability of company assets.</li><li>Maintain high standards for employee facilities and services.</li></ul><p><strong>Compliance and Risk Management:</strong></p><ul><li>Ensure HR and administrative practices comply with laws, standards, and company policies.</li><li>Support the implementation of HSE policies and initiatives.</li><li>Manage HR and administrative risks, including data protection and employee safety.</li></ul><p><strong>Reporting and Analysis:</strong></p><ul><li>Prepare HR and administrative reports with insights and recommendations for management.</li><li>Utilize HR data and metrics to support decision-making and improve processes.</li><li>Monitor budgets and ensure cost-effective resource utilization.</li><li>Develop manpower plans in coordination with Department Heads.</li><li>Perform additional duties as assigned by Senior Management.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Qualifications and Experience:</b></p><ul><li>Bachelor's degree in Human Resources, Business Administration, or a related field.</li><li>MBA or advanced degree in HR or Organisational Development.</li><li>Relevant certifications in Human Resources (e.g., CIPD, SHRM) are advantageous.</li><li>12+ years of experience in human resources and administration, with at least 8 years in a managerial role, preferably in a manufacturing environment.</li><li>Proven experience in talent management, employee relations, Omanisation program management and HR compliance to government regulations.</li></ul><p></p></section>