Fire Alarm Technician Jobs - muscat Oman

<p>Install and maintain fire alarm systems. Install and test smoke detectors, heat detectors, manual call points, sounders and related devices. Troubleshoot fire alarm panel faults and system wiring problems. Carry out periodic inspection, testing and preventive maintenance. Test alarm devices and confirm proper system operation. Read electrical drawings, fire alarm layouts and wiring diagrams. Assist with system commissioning and handover. Identify and rectify faults quickly and safely. Prepare service, inspection and maintenance reports. Follow project safety procedures and Oman Civil Defense requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>ONLY INDIAN CANDIDATES ONLY</p><p>Experience<br>1 - 4 Years<br>Qualification<br>12th Pass<br>Key Skills<br>Fire Alarm Technician<br>Fire Alarm System<br>Fire Fighting Technician<br>Fire &amp; Gas Technician<br>Alarm Monitoring<br>Fire Protection<br>Access Control System<br>Fire Detection</p>

<p>Perform preventive &amp; corrective maintenance of Instrumentation and E&amp;I systems . Calibrate, test and troubleshoot pressure, level, flow &amp; temperature instruments . Troubleshoot PLC, SCADA, VFDs, sensors and encoders . Work with Siemens PLC, WEG VFD, Profibus, Profinet &amp; Modbus . Maintain Fire &amp; Gas systems and CO, SO &amp; H detectors . Read P&amp;IDs, wiring diagrams and instrument datasheets . Maintain maintenance/calibration records and follow HSE &amp; PTW procedures .</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Instrumentation/E&amp;I: 57 years experience OR ITI Electrician: 7 9 years E&amp;I experience. Experience in Port, Plant, Oil &amp; Gas, Refinery, Petrochemical or Heavy Industry . Strong hands-on experience in instrumentation maintenance, calibration &amp; troubleshooting . Knowledge of PLC, SCADA, VFD and Fire &amp; Gas systems . Port/Bulk Handling experience preferred . Good communication and problem-solving skills. Interested candidates can apply with their updated CV.</p>

<p><br></p><p><strong>Scope of Position</strong><br>The Duty Technician is responsible for the daily operation of the engineering department and for ensuring that the department is operated in the safest and most efficient manner. The Duty Technician will assume the responsibilities of the Duty Engineer during his absence.</p><p><strong>Departmental:</strong></p><ul><li>Maintain proper and safe condition of all Plant, Plant Rooms, Equipment and Work areas.</li><li>Comply with all Fire, Life, Health, and Safety Standards.</li><li>To be conversant with the Hotel Emergency Procedures.</li><li>Perform Emergency Response Team duties as required.</li><li>Personal presentation will be clean, neat, and tidy always.</li><li>Be courteous, professional, and service orientated when dealing with Guest, Patrons, and Fellow Staff Members.</li><li>Assist Guests, Patrons, and Fellow Staff Members as and when appropriate.</li><li>Undertake specific duties and projects when assigned.</li><li>Activity support Training Programs.</li><li>To carry out work in accordance with The Hotel Planned Maintenance Program.</li><li>Familiarize himself with the technical details of all Plant and Services relating to the Hotel.</li><li>Work shifts as designated.</li><li>Maintain, repair, check and record equipment relating to:<ul><li>Guest Facilities</li><li>Plant Rooms</li><li>Air Conditioning Equipment</li><li>Refrigeration Equipment</li><li>Fire, Life, Health, and Safety</li><li>Electrical and Mechanical Services</li><li>Plumbing and Heating</li><li>Entertainment Equipment</li><li>Kitchens</li><li>Lighting</li><li>Furniture, Fittings and General Equipment</li></ul></li><li>Actively support and assist the Duty Engineer</li></ul><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Summary:</strong><br> We are looking for a motivated and detail-oriented professional with a background in fire fighting systems engineering to join our team as a Project Engineer – Fire Fighting System. The ideal candidate will combine technical expertise with strong selling skills and the ability to confidently communicate complex solutions. You will play a key role in delivering high-quality fire protection projects while collaborating across departments and ensuring client satisfaction. If you are passionate about fire safety engineering and enjoy developing solutions in a dynamic environment, we invite you to apply. </p><br><br>Key Responsibilities – Project Engineering and Fire Fighting System Management<ul> <li>Manage the planning, execution, and delivery of fire fighting system projects from inception through to completion, ensuring adherence to relevant codes and standards.</li> <li>Liaise with clients, consultants, contractors, and internal stakeholders to establish technical requirements, address queries, and ensure alignment throughout project phases.</li> <li>Prepare and review system designs, material submittals, method statements, and as-built documentation, ensuring technical accuracy and compliance.</li> <li>Attend site meetings, carry out inspections and technical assessments, and provide clear direction to installation teams.</li> <li>Identify and resolve project challenges through effective problem solving and proactive decision making.</li> <li>Assist the sales team by providing technical support, preparing accurate project quotations, and contributing to tender submissions as required.</li> <li>Track project progress, control costs, and ensure delivery against timelines and client expectations.</li> <li>Promote a strong safety culture and adherence to best practices at all project locations.</li> </ul>Required Skills – Selling Skills, Technical Knowledge, and Communication for Fire Fighting Systems<ul> <li>Proven selling skills in a project or engineering context, with the ability to present fire protection solutions and influence stakeholders.</li> <li>Comprehensive technical knowledge of fire fighting systems, including design, installation, testing, and compliance with international and local codes (NFPA, Civil Defence, or equivalent).</li> <li>Excellent communication skills, both verbal and written, with the capability to explain complex concepts to clients and colleagues.</li> <li>Competence in reading schematics, engineering drawings, and producing technical documentation.</li> <li>Experience using relevant engineering software and standard office applications.</li> </ul>Qualifications &amp; Experience – Project Engineer for Fire Fighting Systems<ul> <li>Bachelor’s degree in Mechanical Engineering, Fire Protection Engineering, or a closely related discipline.</li> <li>Minimum 3 years' experience in project engineering or technical roles within the fire fighting, MEP, or building services industry.</li> <li>Direct experience managing installation or commissioning of fire suppression systems, sprinklers, pumps, hydrants, and associated equipment is highly desirable.</li> <li>Familiarity with local regulatory frameworks and fire safety standards is a strong advantage.</li> </ul>What We Offer – Growth Opportunities and Supportive Team Culture<ul> <li>Structured opportunities for career development and technical upskilling in fire safety engineering.</li> <li>Comprehensive induction and continuous training on state-of-the-art fire protection technologies.</li> <li>Inclusive, gender-neutral, and collaborative workplace committed to employee success and innovation.</li> <li>Involvement in prestigious and diverse fire protection engineering projects.</li> </ul> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <p> </p> <p> </p> <div> <strong>POSITION DESCRIPTION:</strong> <strong>Position Title:</strong> Sr. Instrument Technician<br><strong>Reports to:</strong> Instrument Supervisor<br><strong>Department:</strong> Maintenance and Operation Department<br><strong>Location:</strong> Duqm/Ras Markaz<br></div> <p> <strong> </strong> </p> <div> <strong>JOB PURPOSE:</strong> <p>Take job order for maintenance services and overhauls of all Instrumentation &amp; Control equipment and related systems like Compressors, pumps, generators, tanks system and any rotating or static equipment located in the Terminal. In addition, to ensure maintenance activities are carried out as planned within preset time, high quality and as per HSE standards in order to maintain high reliability &amp; availability of Instrument equipment.</p> <p>The position will act in accordance with OTTCO s Mission, Vision, Values &amp; Strategies, as well as, policies,</p> <p>guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p> </div> <p> <strong> </strong> </p> <div> <strong>REPORTING STRUCTURE:</strong> <p> <strong>Number of Staff Supervised</strong> </p> <p> <strong>Direct Reports:</strong> </p> <p> <strong>0</strong> </p> <p> <strong>Total:</strong> </p> <p> <strong>0</strong> </p> </div> <p> <strong> </strong> </p> <div> <strong>KEY RESPONSIBILITIES:</strong> <p> </p> <p> <strong>Responsibilities</strong> </p> <ul> <li>Perform all Instrumentation activities role in Tank Terminal Industry &amp; Duqm Petrochemical Terminal.</li> <li>Prepare and signatory for Permit to Work activities within area of responsibility as licensed and advised by Supervisor and perform operations and maintenance activities in accordance with established company Quality Systems and manufacturers' practices and procedures.</li> <li>Ensure the availability of instrumentation, analyzers, control systems, and communication systems in the area, including the best work practices in maintenance.</li> <li>Install, maintain, repair, overhaul, calibrate, and test various industrial instruments such as control valves, transmitters, DCS, Fire and Gas Systems, ESD systems, and pressure controls.</li> <li>Preform and control all work related to instrument maintenance and calibration and analyze periodic maintenance reports to improve section efficiency.</li> <li>Maintain all instrumentation drawings in as-built condition and ensure any modifications are reflected accurately.</li> <li>Update, maintain detailed records of maintenance, calibration, and repair activities. Document any modifications made to systems and update technical manuals and drawings as necessary.</li> <li>Report any failures of safety-critical elements as per OTTCO standards and oversee the instrumentation side in all assigned locations.</li> <li>Maintain a high level of safety awareness and standards in all daily duties and tasks and guide the subordinate staff on safe working practices.</li> <li>Report daily activity status and work progress to the Instrument Supervisor and assist in planning, coordinating, and controlling instrumentation work activities.</li> <li>Continuously review Instrumentation and Control equipment to identify improvements in operability, reliability, safety, and integrity, and provide written feedback to the Instrument Supervisor.</li> <li>Maintain close communication with the Instrument Supervisor prior to work execution and support them by providing leadership, mentoring, and training to Instrument Technicians.</li> <li>Coordinate and supervise the work of Instrument Technicians and any sub-contractors personnel working on the terminal facilities associated with the Instrument &amp; Control facilities.</li> <li>Promptly respond to callouts for any system or equipment failures, ensuring timely resolution of issues to minimize downtime and maintain operational efficiency.</li> <li>Implement the Preventive Maintenance (PM) plan, manage work backlogs and maintain the maintenance KPI.</li> <li>Ensure that instrumentation maintenance history and reports are updated in SAP (CMMS), maintenance digitalization and critical issues and repetitive failures by implementing Root Cause Analysis (RCA) recommendations.</li> <li>Provide technical support during plant shutdowns</li> <li>Participate in instrumentation-related projects, including upgrades, retrofits, and new installations.</li> <li>Train and mentor junior technicians, providing guidance and support to help them develop their skills and knowledge.</li> <li><br></li> </ul> </div> <p> <strong> </strong> </p> <p> </p> <div> <strong>QUALIFICATIONS, EXPERIENCE, &amp; SKILLS: </strong> <p> </p> <ul> <li>Minimum Qualifications for this position is Diploma in Instrumentation and Control Engineering or equivalent.</li> <li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li> <li>5+ years of experience in Instrumentation and Control Maintenance activities preferably at Oil and Gas Industry</li> <li>Background in Instrumentation maintenance best practices.</li> <li>requirements, Oil/Gas process &amp; systems procedures and practices</li> <li>A good knowledge of relevant operations, HSE requirements, Oil/Gas process &amp; systems procedures and practices.</li> <li>Ability to perform as a team player.</li> <li>Self-motivated and dependable, demonstrating strong initiative.</li> <li>Ability to perform as a team player.</li> <li>Ability to deal with change and demonstrate flexibility as required</li> </ul> </div> <p> </p> <p> <strong> </strong> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION DESCRIPTION: Position Title: Sr. Instrument Technician Reports to: Instrument Supervisor Department: Maintenance and Operation Department Location: Duqm/Ras Markaz</p><p>JOB PURPOSE: Take job order for maintenance services and overhauls of all Instrumentation &amp; Control equipment and related systems like Compressors, pumps, generators, tanks system and any rotating or static equipment located in the Terminal. In addition, to ensure maintenance activities are carried out as planned within preset time, high quality and as per HSE standards in order to maintain high reliability &amp; availability of Instrument equipment.</p><p>The position will act in accordance with OTTCO s Mission, Vision, Values &amp; Strategies, as well as, policies,</p><p>guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>REPORTING STRUCTURE: Number of Staff Supervised Direct Reports: 0 Total: 0</p><p>KEY RESPONSIBILITIES:</p><p>Perform all Instrumentation activities role in Tank Terminal Industry &amp; Duqm Petrochemical Terminal.</p><p>Prepare and signatory for Permit to Work activities within area of responsibility as licensed and advised by Supervisor and perform operations and maintenance activities in accordance with established company Quality Systems and manufacturers' practices and procedures.</p><p>Ensure the availability of instrumentation, analyzers, control systems, and communication systems in the area, including the best work practices in maintenance.</p><p>Install, maintain, repair, overhaul, calibrate, and test various industrial instruments such as control valves, transmitters, DCS, Fire and Gas Systems, ESD systems, and pressure controls.</p><p>Preform and control all work related to instrument maintenance and calibration and analyze periodic maintenance reports to improve section efficiency.</p><p>Maintain all instrumentation drawings in as-built condition and ensure any modifications are reflected accurately.</p><p>Update, maintain detailed records of maintenance, calibration, and repair activities. Document any modifications made to systems and update technical manuals and drawings as necessary.</p><p>Report any failures of safety-critical elements as per OTTCO standards and oversee the instrumentation side in all assigned locations.</p><p>Maintain a high level of safety awareness and standards in all daily duties and tasks and guide the subordinate staff on safe working practices.</p><p>Report daily activity status and work progress to the Instrument Supervisor and assist in planning, coordinating, and controlling instrumentation work activities.</p><p>Continuously review Instrumentation and Control equipment to identify improvements in operability, reliability, safety, and integrity, and provide written feedback to the Instrument Supervisor.</p><p>Maintain close communication with the Instrument Supervisor prior to work execution and support them by providing leadership, mentoring, and training to Instrument Technicians.</p><p>Coordinate and supervise the work of Instrument Technicians and any sub-contractors personnel working on the terminal facilities associated with the Instrument &amp; Control facilities.</p><p>Promptly respond to callouts for any system or equipment failures, ensuring timely resolution of issues to minimize downtime and maintain operational efficiency.</p><p>Implement the Preventive Maintenance (PM) plan, manage work backlogs and maintain the maintenance KPI.</p><p>Ensure that instrumentation maintenance history and reports are updated in SAP (CMMS), maintenance digitalization and critical issues and repetitive failures by implementing Root Cause Analysis (RCA) recommendations.</p><p>Provide technical support during plant shutdowns</p><p>Participate in instrumentation-related projects, including upgrades, retrofits, and new installations.</p><p>Train and mentor junior technicians, providing guidance and support to help them develop their skills and knowledge.</p><p>Interface with other maintenance/service department staff to coordinate breakdown or routine maintenance work on facilities and plants.</p><p>Full utilization of the use of SAP software to manage the day-to-day planning and scheduling of maintenance activities, ensuring quality control of the work is done and accomplished successfully.</p><p>Effective utilization of service laptops and field-related software, including PLC, TGS, and other instrumentation and control systems, to support day-to-day maintenance activities, diagnostics, troubleshooting, and system monitoring, ensuring work quality, system integrity, and successful task completion.</p><p>Manage spare parts inventory and ensure the availability for overhauls and emergency maintenance critical spares, follow up on spare status to support timely and high-quality work execution, and inspect newly purchased materials and spares upon receipt to ensure compliance with required specifications.</p><p>Ensure all required critical &amp; normal consumables are identified, ordered and stocked at stores.</p><p>Maintain tools and equipment s to be fully operational and in good working order.</p><p>Demonstrate familiarity with QHSE policies, objectives, procedures, and related record-keeping requirements.</p><p>Maintain awareness of emergency preparedness and response measures, as well as the implications of non-conformance with the Integrated Management System requirements, including failure to meet organizational compliance obligations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Qualifications for this position is Diploma in Instrumentation and Control Engineering or equivalent.</p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p>5+ years of experience in Instrumentation and Control Maintenance activities preferably at Oil and Gas Industry</p><p>Background in Instrumentation maintenance best practices.</p><p>requirements, Oil/Gas process &amp; systems procedures and practices</p><p>A good knowledge of relevant operations, HSE requirements, Oil/Gas process &amp; systems procedures and practices.</p><p>Ability to perform as a team player.</p><p>Self-motivated and dependable, demonstrating strong initiative.</p><p>Ability to perform as a team player.</p><p>Ability to deal with change and demonstrate flexibility as required</p><p></p></section>

<p><strong>POSITION DESCRIPTION:</strong> Position Title: Fire Fighting Supervisor Reports to: HSE Manager Department: Operation &amp; Maintenance - HSE Location: All OTTCO Terminals</p><p><strong>JOB PURPOSE:</strong> Lead and oversees as stand-alone role, the firefighting activities at OTTCO, under delegated authority and direction from OTTCO CHSSE, the owner of the Firefighting Services including resource planning, synchronization of operations, adjustment of operational parameters, through; (1) To control and overseas the replenishing consumables, scheduling inspection of fire hydrants, extinguishers and other equipment keeping all relevant maintenance reports and files. (2) Responsible of the Emergency Response, initial external Communication and Escalation to top level CHSSE. (3) supervise its assigned Unity team for the assigned sites, and (4) administer maintenance programs for OTTCO s firefighting systems and equipment; in order to ensure maintenance programs for OTTCO s firefighting systems and equipment specifications are set and met at optimum cost in a safe and efficient manner and handles all problems and emergencies occurring during shifts.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives</p><p><strong>REPORTING STRUCTURE:</strong> Number of Staff Supervised Direct Reports: 4 Total: 4</p><p><strong>KEY RESPONSIBILITIES:</strong></p><ul><li>Supervise the day-to-day Firefighting operations for the assigned site to ensure that work processes are implemented as designed and comply with established standards and procedures</li><li>Overview and influencing the teams in order to ensure the optimization of OTTCO s (as a system) in term of safety, environment, production, and margin cost.</li><li>Coach and mentoring of Firefighting Operators in order to contribute with department on capacity building Processes, and drive the agenda for continuous improvement.</li><li>Supervises and actively controls all Firefighting operations in close coordination with Unity Team.</li><li>Developed weekly / monthly reports</li><li>Implementation of Incident Command System and competencies.</li><li>Participate in the development of the emergency response and business continuity plans, continuously update, enhance, review and maintain the plans and pertaining documents to ensure they are up to date.</li><li>Plan and propose various awareness programs to encourage a work environment that values fire safety</li><li>Maintain up to date documentation on SOP s, departmental plans (Emergency Response Plans, Business Continuity plans etc.) for training purposes</li><li>Maintain on the ground presence during routine inspections, mock drills, and emergency scenario tests to observe and gather any feedback for improving the fire &amp; safety policies and plans</li><li>Initiates emergency response in case of major incidents.</li><li>Decides and declares type of emergency to ensure that all emergencies are handled in the most effective and safe way.</li><li>Acts as the Operations Site Coordinator during plant upset / emergency situations.</li><li>Ensures all operations staff are familiar with their unit emergency procedures</li></ul><p><strong>Optimization</strong></p><ul><li>Reviews and analyses Firefighting parameters and performance and takes necessary action to ensure targets are met with minimum wastage and optimum cost.</li><li>Works with the unit supervisor to identify and eliminate unplanned flare sources and optimize utility usage QHSE.</li><li>risks associated with their risk.</li><li>Awareness of Emergency preparedness and response measures.</li><li>Awareness on implications of not conforming to the integrated managements system requirements, including not fulfilling the organization s compliance obligations.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Operations Shift Staff, Engineers, Maintenance Coordinator, Maintenance, HSSE.</li><li>External: Surveying Companies, ROP and Civil Defense), other contractors and suppliers, Marketers.</li></ul><p>Notable Working Conditions: Field Operations and office environment, Moderate to intensive computer screen use.</p><p><strong>QUALIFICATIONS, EXPERIENCE, &amp; SKILLS:</strong></p><ul><li>Bachelors in Fire &amp; Safety Management or relevant</li><li>+10 Years of relevant experience in similar role.</li><li>Exposure to and experience with all fire and safety equipment s used in a refinery or petrochemicals</li><li>Demonstrated working experience in:</li><li>SOP interpretation</li><li>Refinery operations (Process, Static &amp; Rotating Equipment)</li><li>HSE (Permit to Work PTW, Confined Space, Process Safety, H2S Awareness, Basic Fire Fighting, Emergency Response</li><li>Process Control</li><li>Troubleshooting</li><li>Emergency Response Assessment</li><li>Risk Assessment</li></ul><p><strong>Competencies:</strong></p><ul><li>Proficiency in M/S Office</li><li>Procedure Writing</li><li>Information Management</li><li>Fire Equipment Specifying</li><li>Supervisory skills</li><li>Planning &amp; Organizing skills</li><li>Analytical &amp; Observational skills</li><li>Emergency Response Assessment</li><li>Risk Assessment</li><li>Ability to work collaboratively to develop and deliver appropriate solutions.</li><li>Ability to describe personal strengths and development needs.</li><li>Demonstrated ability to cooperate with and influence peers.</li><li>Demonstrated ability to listen and collaborate with others.</li><li>Technical understanding of downstream petroleum industries</li><li>Business understanding of HC (hydrocarbons) marketing and their movements</li><li>Understanding of LP optimization</li><li>Collaborative Approach</li><li>Managing performance</li><li>Exercising influence</li><li>Work Prioritization</li><li>Report Writing</li><li>SOP interpretation</li><li>Terminal operations (Process, Static &amp; Rotating Equipment)</li><li>HSE (Permit to Work PTW, Confined Space, Process Safety, H2S Awareness, Basic Fire Fighting, Emergency Response</li><li>Process Control</li><li>Troubleshooting</li><li>Risk Assessment</li><li>Communication</li></ul><p>Must hold a valid certificate in the following courses according to Association of Fire Chiefs:</p><ul><li>Fire Fighter I and II</li><li>First Aid and Basic Life Support</li><li>ICS 100 and 300</li><li>Incident Safety Officer</li><li>Industrial Fire Fighter</li><li>HAZMAT Operations</li><li>Rope Rescue</li><li>Confined Space Rescue</li><li>Bulk Storage Emergencies</li><li>Fire Inspector</li><li>Fire Instructor I, II</li><li>Fire Officer I, II</li><li>Train the trainer</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelors in Fire &amp; Safety Management or relevant</li><li>+10 Years of relevant experience in similar role.</li><li>Exposure to and experience with all fire and safety equipment s used in a refinery or petrochemicals</li><li>Demonstrated working experience in:</li><li>SOP interpretation</li><li>Refinery operations (Process, Static &amp; Rotating Equipment)</li><li>HSE (Permit to Work PTW, Confined Space, Process Safety, H2S Awareness, Basic Fire Fighting, Emergency Response</li><li>Process Control</li><li>Troubleshooting</li><li>Emergency Response Assessment</li><li>Risk Assessment</li></ul><p><strong>Competencies:</strong></p><ul><li>Proficiency in M/S Office</li><li>Procedure Writing</li><li>Information Management</li><li>Fire Equipment Specifying</li><li>Supervisory skills</li><li>Planning &amp; Organizing skills</li><li>Analytical &amp; Observational skills</li><li>Emergency Response Assessment</li><li>Risk Assessment</li><li>Ability to work collaboratively to develop and deliver appropriate solutions.</li><li>Ability to describe personal strengths and development needs.</li><li>Demonstrated ability to cooperate with and influence peers.</li><li>Demonstrated ability to listen and collaborate with others.</li><li>Technical understanding of downstream petroleum industries</li><li>Business understanding of HC (hydrocarbons) marketing and their movements</li><li>Understanding of LP optimization</li><li>Collaborative Approach</li><li>Managing performance</li><li>Exercising influence</li><li>Work Prioritization</li><li>Report Writing</li><li>SOP interpretation</li><li>Terminal operations (Process, Static &amp; Rotating Equipment)</li><li>HSE (Permit to Work PTW, Confined Space, Process Safety, H2S Awareness, Basic Fire Fighting, Emergency Response</li><li>Process Control</li><li>Troubleshooting</li><li>Risk Assessment</li><li>Communication</li></ul><p>Must hold a valid certificate in the following courses according to Association of Fire Chiefs:</p><ul><li>Fire Fighter I and II</li><li>First Aid and Basic Life Support</li><li>ICS 100 and 300</li><li>Incident Safety Officer</li><li>Industrial Fire Fighter</li><li>HAZMAT Operations</li><li>Rope Rescue</li><li>Confined Space Rescue</li><li>Bulk Storage Emergencies</li><li>Fire Inspector</li><li>Fire Instructor I, II</li><li>Fire Officer I, II</li><li>Train the trainer</li></ul>

<p>MEP Technician for Oman Company</p><p><strong>Desired Candidate Profile</strong></p><p>MEP Technician Exp. in Mechanical, Plumbing, Electrical work Exp. in BMS &amp; Facility Mgmt</p>

<p>MEP Technician for Oman Company</p><p><strong>Desired Candidate Profile</strong></p><p>MEP Technician Exp. in Mechanical, Plumbing, Electrical work Exp. in BMS &amp; Facility Mgmt</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION DESCRIPTION: Position Title: Mechanical Technician Reports to: Mechanical Supervisor Department: Maintenance and Operations Department Location: Duqm/ Ras Markaz </p><p>JOB PURPOSE: Carry out preventive, corrective, and predictive maintenance of all mechanical systems and equipment across OTTCO s terminals, including pumps, compressors, valves, tanks, piping systems, HVAC units, and other static and rotating machinery, to ensure continuous and reliable operation of all facilities. </p><p>The position ensures that all maintenance and repair activities are performed in compliance with OTTCO s maintenance procedures, HSE policies, OEM recommendations, and international standards, supporting operational reliability and mechanical integrity of terminal assets. </p><p>REPORTING STRUCTURE: Number of Staff Supervised Direct Reports: 0 Total: 0 </p><p>KEY RESPONSIBILITIES: </p><p>Operations &amp; Maintenance </p><p>Perform preventive and corrective maintenance on mechanical systems including pumps, compressors, gearboxes, valves, piping networks, and pressure vessels. </p><p>Dismantle, inspect, and assemble rotating equipment during scheduled and unscheduled maintenance. </p><p>Conduct alignment, balancing, lubrication, and vibration monitoring as per preventive maintenance plans. </p><p>Assist in troubleshooting equipment failures and identify root causes in coordination with the Mechanical Supervisor. </p><p>Carry out routine inspections to detect leaks, abnormal noise, vibration, or wear in mechanical components. </p><p>Support maintenance and inspection of static equipment such as tanks, exchangers, and pipelines. </p><p>Perform mechanical isolations, tagging, and reinstallation in accordance with PTW and safety procedures. </p><p>Update maintenance job cards, inspection findings, and work completion details in the CMMS (SAP/Maximo) system. </p><p>Participate in start-up, shutdown, and major overhaul activities as per approved maintenance plans. </p><p>Project &amp; Technical Support </p><p>Assist in installation, commissioning, and modification of mechanical equipment for ongoing projects or upgrades. </p><p>Participate in inspection and quality verification of mechanical works carried out by contractors. </p><p>Ensure installations comply with design drawings, mechanical standards, and project specifications (API, ASME, ASTM, ISO). </p><p>Provide site feedback on equipment condition and improvement opportunities to enhance reliability and maintainability. </p><p>Safety &amp; Compliance </p><p>Follow OTTCO s HSE, Permit-to-Work (PTW), and mechanical isolation procedures at all times. </p><p>Conduct toolbox talks and ensure proper use of PPE, tools, and lifting equipment. </p><p>Identify and report unsafe acts, conditions, or potential hazards promptly. </p><p>Maintain mechanical workshops, pump stations, and maintenance areas in a clean and safe condition. </p><p>Ensure safe execution of lifting, rigging, and confined space activities as per approved procedures. </p><p>Participate in emergency drills and support plant safety initiatives. </p><p>Teamwork &amp; Coordination </p><p>Coordinate with Electrical, Instrument, and Operations teams to perform multidisciplinary maintenance activities. </p><p>Support supervisors during shutdowns, major overhauls, and turnaround campaigns. </p><p>Assist in mentoring and training junior technicians and contractors to maintain work quality and efficiency. </p><p>Participate in team meetings, planning sessions, and maintenance improvement workshops. </p><p>Documentation &amp; Reporting </p><p>Record daily work activities, inspection data, and equipment readings in job sheets or CMMS. </p><p>Maintain equipment history cards, lubrication charts, and spares consumption logs. </p><p>Report defects, performance issues, and material shortages to supervisors for timely action. </p><p>Support preparation of maintenance reports, failure analysis records, and spare parts lists. </p><p>Continuous Improvement </p><p>Recommend improvements to maintenance practices, procedures, and job plans. </p><p>Participate in root cause analysis (RCA) for repeated mechanical failures. </p><p>Support reliability and efficiency enhancement programs under the ETIZAAN initiative. </p><p>Identify cost-saving opportunities related to spare parts, lubrication, or resource utilization. </p><p>Perform any other duties or special assignments as directed by line management. </p><p>Familiarization with QHSE Policies, Objectives, procedures and its record maintenance </p><p>Awareness on Significant environmental aspects, Health and safety hazards, related actual and potential aspects and risks associated with their risk. </p><p>Awareness on Emergency preparedness and response measures. </p><p>Awareness on implications of not conforming to the integrated managements system requirements, including not fulfilling the organization s compliance obligations </p><p>Key interactions </p><p>Internal: Department Managers, Operations Shift Staff, SCM, TSD, Maintenance, HSE, Fire </p><p>External: OQ, SIPC, Surveying Companies, ROP and Civil Defence, gas companies, other contractors and suppliers as required. Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or National Vocational Qualification (NVQ) in Mechanical Engineering / Industrial Maintenance. </p><p>Professional Certifications </p><p>Authorized certification in Mechanical Maintenance / Rotating Equipment Maintenance. </p><p>HSE and PTW system certifications such as NEBOSH/IOSH preferred. </p><p>Training in Vibration Analysis, Alignment, and Rigging/Lifting Safety is advantageous. </p><p>CMMS (SAP) training and basic computer literacy preferred. </p><p>Experience </p><p>+5 years of hands-on experience in mechanical maintenance within oil &amp; gas terminals, refineries, or heavy industrial facilities. </p><p>Experience in servicing and maintaining centrifugal and positive displacement pumps, compressors, valves, and gearboxes. </p><p>Familiar with mechanical sealing systems, gaskets, and bolting procedures. </p><p>Experience in piping maintenance, leak repair, and hydrotesting. </p><p>Working knowledge of tanks, pressure vessels, exchangers, and HVAC systems. </p><p>Familiar with international standards such as API 610, 650, 682, ASME, and ASTM. </p><p>Technical Competencies </p><p>Skilled in dismantling, assembling, and aligning rotating machinery. </p><p>Proficiency in using precision tools (dial gauges, micrometers, torque wrenches, etc.). </p><p>Ability to interpret mechanical drawings, P&amp;IDs, and maintenance manuals. </p><p>Knowledge of lubrication practices, material compatibility, and corrosion prevention. </p><p>Capable of performing mechanical troubleshooting and identifying failure modes. </p><p>Familiar with safe rigging, lifting, and confined space work practices. </p><p>Behavioral Competencies </p><p>Safety-oriented with strong discipline and attention to detail. </p><p>Good communication and teamwork abilities across multi-discipline teams. </p><p>Capable of working under supervision and delivering high-quality workmanship. </p><p>Proactive, reliable, and committed to continuous improvement. </p><p>Upholds OTTCO s values of Safety, Integrity, Reliability, and Operational Excellence. </p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>A reputed healthcare facility in Saham, Oman is looking for a dedicated and experienced Female Lab Technician to join its professional team. This is an excellent opportunity for candidates seeking a rewarding career in a modern healthcare environment with competitive compensation.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Job Position: Lab Technician (Female)</p> <p>Location: Saham, Oman</p><p></p></section>

<p>We are looking for an experienced Specialized Elevator Technician for a reputed company. The candidate will be responsible for the installation, maintenance, repair, and troubleshooting of elevator systems to ensure safe and reliable operation. The role requires strong technical knowledge and hands-on experience with different elevator systems, especially European brands.</p><p>Key Responsibilities</p><ul><li>Install, inspect, and maintain elevator systems and related components</li><li>Diagnose and repair elevator malfunctions and electrical faults</li><li>Perform preventive maintenance to ensure safe and smooth elevator operation</li><li>Troubleshoot mechanical and electrical issues in elevator systems</li><li>Work with elevator control panels, wiring, and electrical systems</li><li>Follow safety standards and operational procedures during maintenance work</li><li>Coordinate with the technical team to resolve complex technical issues</li><li>Maintain service records and report maintenance activities</li></ul><p>Salary: 83000 INR Per Month</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 5+ years of experience in elevator installation and maintenance</li><li>Experience working with multiple European elevator brands</li><li>Technical background in electrical systems or elevator technology</li><li>Experience as Assistant Electrician or Elevator Technician preferred</li><li>Ability to troubleshoot mechanical and electrical elevator systems</li><li>Basic English communication skills</li><li>Age between 27 40 years</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Require Piping and PLG gas Technician for LPG gas supply company in Oman. Candidates must require experience in Piping , Gas Piping , LPG installation etc.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must require experience in Piping , Gas Piping , LPG installation etc.</p><p></p></section>

<p>Diagnose and Repair Engine, Transmission, Suspension, and Brake System Issues. Perform Routine Vehicle Maintenance and Inspections. Replace Defective Parts and Ensure Vehicles are Safe for Operation. Use Diagnostic Tools and Follow Workshop Safety Procedures. Repair Damaged Vehicle Body Panels and Frames. Remove Dents Using Appropriate Repair Techniques. Replace Damaged Body Parts When Necessary. Prepare Vehicle Surfaces for Painting.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Experience 1 - 5 Years</li><li>Qualification 10th Pass</li><li>Key Skills: Car Technician, Car Manufacturing, Car Sales, Car Denter, Car Washer, Car Mechanic, Car Driver, Car Sales Executive, Motor Mechanic</li></ul>

<p>As discussed, we have an urgent requirement for a UT Level II Technicians-15 Nos. for the Qatar Energy LNG Project with the following qualifications and experience.</p><p><strong>Desired Candidate Profile</strong></p><p><b>Mandatory Requirements:</b></p><ul><li>UT Technician certified in PCN 3.1, 3.2, 3.8 &amp; 3.9</li><li>Minimum 5 years of experience in Ultrasonic Testing</li><li>Strong hands-on field experience in performing UT inspections on Oil &amp; Gas Offshore Structures and Piping</li><li>Experience in inspection of Butt Welds and T/K/Y Joints</li><li>In-depth knowledge and experience in API RP 2X will be highly preferred</li><li>Technician shall qualify interview &amp; Company Mockup as per API RP-2X &amp; responsibilities</li></ul>

<p>We are looking for qualified and experienced <strong>Laser Technicians</strong> to join our team in Oman. The ideal candidate should have a nursing or medical background with hands-on experience in performing laser treatments while ensuring high standards of patient care and safety.</p><br><p><strong>Requirements-</strong></p><ul><li><p><strong>Nationality:</strong> Philippines or Nepal.</p></li><li><p><strong>Education:</strong> Diploma/Degree in Nursing or any Medical/Healthcare-related field.</p></li><li><p><strong>Experience:</strong> Minimum <strong>1 year</strong> of experience as a Laser Technician.</p></li><li><p>Good communication and interpersonal skills.</p></li><li><p>Ability to work in a professional clinical environment.</p><br></li></ul><p><strong>Benefits-</strong></p><ul><li><p><strong>Accommodation:</strong> Provided by the company.</p></li><li><p><strong>Annual Leave:</strong> 30 days.</p></li><li><p><strong>Air Ticket:</strong> One return ticket every two years.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>.</p>

<p><br></p><p>❖ RETUBING TECHNICIAN</p><p>Shortlisting in Progress URGENT RECRUITMENT</p><p>➤ Qualification: Diploma in Mechanical Engineering or ITI.</p><p>➤ Perform heat exchanger and condenser retubing, including tube removal and installation.</p><p>Carry out tube cutting, pulling, cleaning, alignment and preparation.</p><p>➤ Operate hydraulic tube pullers, tube expanders and tube rolling machines.</p><p>➤ Perform tube-to-tube sheet expansion/rolling, tube plugging and leak rectification.</p><p><br></p>

<p><b>Industrial Electrical Technician Responsibilities:</b></p><ul><li>knowledgeable and technical experience about CNC and PLC details.</li><li>Troubleshoot malfunctions of any electrical system must make inspections and assess potential problems and recommend changes or upgrades to electrical systems to increase productivity and functionality.</li><li>Perform regular tests to new and existing electrical systems equipment and machinery both to spot potential problems and to ensure that systems are operating at their highest possible levels of functionality.</li><li>knowledge in Problem Solving Process and Root cause analysis.</li><li>Provide regular scheduled electrical mechanical monitoring Activities.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>ITI/Diploma Candidates with Good experience 3-5 years in any Engineering company.</li><li>Diploma in Electrical and Electronics Engineering</li><li>Good Verbal &amp; written communication skills in English with problem solving.</li></ul>

<p><strong>Key Responsibilities</strong></p><ul><li><p>Perform preventive and corrective maintenance on forklifts and material-handling equipment.</p></li><li><p>Diagnose and repair mechanical, hydraulic, electrical, and electronic faults in Forklifts.</p></li><li><p>Conduct routine inspections and identify safety-critical defects.</p></li><li><p>Troubleshoot forklift breakdowns and restore equipment to safe operating condition with minimum downtime.</p></li><li><p>Maintain and repair mast, lifting, steering, braking, transmission, drive, hydraulic, and electrical systems.</p></li><li><p>Carry out battery, charging-system, engine, fuel, and cooling-system maintenance as applicable to the equipment type.</p></li><li><p>Use diagnostic tools, test equipment, service manuals, and technical schematics to identify faults.</p></li><li><p>Perform functional and safety checks after completing repairs.</p></li><li><p>Maintain accurate records of inspections, repairs, spare parts, and preventive maintenance activities.</p></li><li><p>Follow all company HSE, maintenance, and equipment safety procedures.</p></li></ul><p><strong>Essential Qualifications & Experience</strong></p><ul><li><p>Technical diploma/certificate in Mechanical, Automotive, Electrical, Heavy Equipment, or a related technical field.</p></li><li><p>Minimum <strong>3–5 years of relevant experience</strong> as a Forklift Technician, Material Handling Equipment Technician, Heavy Equipment Technician, or similar role.</p></li><li><p>Hands-on experience with <strong>electric and/or internal-combustion forklifts</strong>.</p></li><li><p>Strong knowledge of <strong>mechanical, hydraulic, electrical, and electronic systems</strong>.</p></li><li><p>Proven ability to diagnose faults and perform repairs independently.</p></li><li><p>Ability to read and understand <strong>hydraulic and electrical schematics</strong>.</p></li><li><p>Experience using mechanical, electrical, hydraulic, and diagnostic tools.</p></li><li><p>Good knowledge of preventive maintenance practices.</p></li><li><p>Strong understanding of equipment safety and safe maintenance procedures.</p></li><li><p>Experience with major forklift brands/OEM equipment is an advantage.</p></li></ul><p><strong>Key Competencies</strong></p><ul><li><p>Strong troubleshooting and problem-solving skills.</p></li><li><p>Good mechanical and technical aptitude.</p></li><li><p>Safety-focused approach to all maintenance activities.</p></li><li><p>Ability to work independently and as part of a maintenance team.</p></li><li><p>Good attention to detail and quality of workmanship.</p></li><li><p>Ability to work under pressure and respond to equipment breakdowns.</p></li><li><p>Good communication and reporting skills.</p></li><li><p>Reliable, disciplined, and service-oriented.</p></li><li><p>Willingness to work shifts, overtime, or emergency breakdown support when required.</p></li></ul><p><strong>Preferred / Advantageous</strong></p><ul><li><p>OEM/manufacturer training or certification in forklift maintenance.</p></li><li><p>Experience with Toyota, Hyster-Yale, Linde, Jungheinrich, Mitsubishi, Crown, CAT, Komatsu, or other major forklift brands.</p></li><li><p>Experience with modern electric forklifts, electronic control systems, and diagnostic software.</p></li><li><p>Previous experience in warehouse, logistics, manufacturing, port, or industrial environments.</p></li><li><p>Valid driving license, where applicable.</p></li></ul><br><p><strong>Desired Candidate Profile</strong></p><p>A hands-on, safety-focused Forklift Technician with 3–5 years of practical experience, strong mechanical/hydraulic/electrical troubleshooting skills, and proven ability to independently maintain, diagnose, and repair electric and/or IC forklifts while minimizing equipment downtime.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Our client, an award-winning group of hotels in Europe, is seeking an experienced Mechanical Technician to join their Engineering team.<br> The successful candidate will be responsible for the maintenance, repair, and efficient operation of the hotel's mechanical systems and equipment, ensuring a safe, comfortable, and well-maintained environment for guests and staff.<br> Responsibilities Perform preventive and corrective maintenance on hotel mechanical systems and equipment.<br> Inspect, troubleshoot, repair, and maintain HVAC, pumps, motors, boilers, plumbing-related mechanical equipment, and other building systems .<br> Identify mechanical faults and carry out appropriate repairs to minimize equipment downtime.<br> Monitor the operation and performance of mechanical equipment and report defects or potential issues.<br> Conduct routine inspections and preventive maintenance in guest rooms, public areas, back-of-house areas, and plant rooms.<br> Safely use and maintain mechanical tools, equipment, and testing instruments.<br> Assist with installation, replacement, and commissioning of mechanical equipment and systems when required.<br> Maintain accurate records of maintenance work, repairs, and equipment issues.<br> Follow hotel health, safety, hygiene, and environmental procedures.<br> Coordinate with the Engineering/Maintenance team and external contractors when required.<br> Maintain a clean and organized work area and ensure tools and equipment are properly stored.<br> Perform other related duties as assigned by the Engineering or Maintenance Manager.<br> Competitive salary as per market standards Proven experience as a Mechanical Technician, Mechanical Maintenance Technician, or similar role within 4- or 5-star hotels, luxury resorts, facilities management companies, large commercial properties, or similar technical environments.<br> Technical or vocational qualification in Mechanical Engineering, Mechanical Maintenance, HVAC, or a related field is preferred.<br> Good knowledge of mechanical systems, equipment, maintenance, and troubleshooting.<br> Practical experience with HVAC systems, pumps, motors, boilers, and other mechanical equipment.<br> Ability to diagnose mechanical faults and perform repairs and preventive maintenance.<br> Familiarity with maintenance tools, testing equipment, and safety procedures.<br> Ability to read and understand basic technical drawings, manuals, and equipment specifications.<br> Proficient in English.<br> Willingness to relocate and work in Cyprus if selected.<br></span> </div>