Equipment operator Jobs

<p><h4>Job Description</h4> <p>The Traffic Management Specialist arranges the shipment of Global Prepositioned Material Services (GPMS) cargo to various worldwide destinations via air, land, and sea. The incumbent must comply with all applicable international and federal transportation laws, regulations, tariffs, and Department of Defense (DOD) guidance. Must be able to gain access to Logistics Tool Suite (LTS), Global Freight Management (GRM), Cargo Movement Operating System (CMOS), Integrated Logistics System-Supply (ILS-S), Global Air Transportation Execution System (GATES), Integrated Computerized Deployment System (ICODES), Integrated Booking System (IBS), Joint Container Management system (JCM), Wood Packaging Materials (WPM) Management Toolset, Global Asset Reporting Tool (GART), and web-based tracking systems such as Integrated Data Environment/Global Transportation Network Convergence (IGC), Radio Frequency Identification (RFID-ITV) Tracking Portal, Global Decision Support Systems (GDSS-2), and Single Mobility System (SMS) to ensure in-transit visibility (ITV) within the Defense Transportation System (DTS). Ensures all shipments comply with the International Trade and Arms Regulations (ITAR), the Performance Work Statement (PWS), and Amentum ISO 9001 Quality Management System (QMS). Must be able to complete AMMO-43, Intermodal Dry Cargo Container/CSC Reinspection, AMMO-62, Technical Transportation of Hazardous Materials Distance Learning Courses, and WPM certification/recertification web-based training. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Inspects, accepts documentation (DD Form 1149/1348-1), prepares, and processes all outbound/inbound cargo offered for transportation in the Defense Transportation System (DTS).</li> <li>Checks for completeness and accuracy. Verifies the nomenclatures, quantity, Transportation Control Numbers (TCN), Transportation Account Code (TAC), consignor and consignee codes, hazardous/classified materials, ITARS certifications, and other essential transportation data.</li> <li>Properly classifies freight, selects commodity codes, selects the most efficient mode of shipment, and controls obligations for government transportation funds.</li> <li>Prepares all required shipping documents for data input to CMOS/GATES, assigns Transportation Control Numbers, produces labels, issues truck manifest for general/hazardous cargo, and maintains manifest logs.</li> <li>Uses automated computer systems to process and document to accurately input the Transportation Control Numbers, Transportation Accounting Codes, consignor and consignee codes, and other essential transportation data into CMOS, GATES, or IBS.</li> <li>Inspects hazardous materials to ensure proper packaging, marking, labeling, documentation, and certification in accordance with applicable Dangerous Goods Regulations (AFMAN 24-604, 49 Code of Federal Regulation, International Air Transport Association (IATA), and International Maritime Dangerous Goods (IMDG)).</li> <li>Inspects, accepts, and inventories all incoming freight and containers for overages, shortages, and damage before acceptance. When required, initiates and completes DD Form 361, Transportation Discrepancy Report (TDR).</li> <li>Provides asset visibility and real-time view to track customer queries using IGC, RFID-ITV, GDSS2, or SMS.</li> <li>Prepares shipping documents and movement requests for international and domestic shipments between sites and container movements from the Sea Port of Embarkation (POE) to the Sea Port of Debarkation (POD) shipped by surface or sealift.</li> <li>Performs Port Handling and Inland Transportation (PHIT) and ensures the subcontractor performs all duties and responsibilities according to the Statement of Work (SOW). Inspects and documents each shipment for contract compliance on a Customer Service Survey form.</li> <li>Processes Export Traffic Release Requests (ETRR) for sealift shipments using Surface Deployment Distribution Command (SDDC) - Integrated Booking System (IBS).</li> <li>Performs host country customs clearances and liaises with military and host country ministries on import and export for border customs clearances, airport customs clearances, and seaport clearances.</li> <li>Selects and initiates contact with local carriers to arrange appropriate transport equipment for containers, classified, sensitive, hazardous, or outsized shipments based on the size, weight, commodity description, freight classification, required delivery date, priority, or other special requirements.</li> <li>Loads/unloads 463L pallets, equipment, vehicles, and ISO containers from flat-bed/low-bed trucks. May assist in loading/unloading military vessels at the seaport.</li> <li>Assists the Pallet and Net Managers with inspections, issuing, accounting, controlling, reporting, and maintaining operation stock levels of 463L pallets, nets, and other tie-down equipment located on-site.</li> <li>Assists the WPM Custodian with inspecting and certification, record keeping, and reporting the receipt and usage requirements.</li> <li>Assists the CCO with completing the monthly container inventory, ensuring all containers located on-site are inventoried between the 1st and 30th day of each month.</li> <li>Reports all lost, damaged, destroyed, and modified containers to the CCO within 12 hours of discovery.</li> <li>Performs container inspections and reports findings on the DA 2404 equipment inspection and maintenance worksheet.</li> <li>Receives/ships all containers in JCM within 12 hours of receipt or departure.</li> <li>Operates GATES and ICODES to process and manifest cargo and to develop load plans for military and commercial aircraft.</li> <li>Prepares, inspects, reviews, and submits preload plans, hazardous materials diplomatic clearances (HAZDIP), and other documents to facilitate air movement.</li> <li>Inspects cargo documentation, conducts joint inspections, and certifies that cargo is built correctly and airworthy.</li> <li>Computes weight and balance and certifies weight distribution of the aircraft with passengers, cargo, and baggage.</li> <li>Determines cargo configuration and aircraft loading requirements in accordance with Air Transportability Test Loading Activity Certifications (ATTLA).</li> <li>Loads, unloads, and services aircraft. Ensures cargo loads are secure and tied down. Assists load team chief with selecting, assembling, palletizing, and transporting cargo loads to and from aircraft and storage areas.</li> <li>Safely transports and handles explosives.</li> <li>Performs passenger service procedures, check-in, manifests passengers and baggage, and performs security checks. Loads/unloads passengers and baggage from aircraft.</li> <li>Performs weighing of cargo, vehicles, and outsized cargo to determine the center of balance for rolling stock and ensures cargo dimensions are within pallet and aircraft limitations.</li> <li>Implements, documents, and controls quality, training, environment, and safety programs.</li> <li>Prepares and handles cargo in accordance with all prescribed regulations, instructions, technical orders, and procedures.</li> <li>Accomplishes receiving process for all inbound cargo functions of MILSTRIP and NON-MILSTRIP shipments addressed to the host installation SRAN in accordance with regulation.</li> <li>Maintains technical orders, publications, forms, and files required for traffic management operations.</li> <li>Compiles data and submits reports and other correspondence as required.</li> <li>Performs other duties as assigned.</li> <li>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum PowerPoint, Excel, and Word programs.</li> <li>Knowledge of related shipping/receiving procedures and the ability to detect/report problems to appropriate personnel.</li> <li>Excellent organizational skills and the ability to effectively work under pressure and strict timelines required.</li> <li>Ability to maintain an effective working relationship with coworkers, including multi-national staff and external and internal customers is required.</li> <li>Must be able to communicate clearly and concisely, orally and in writing to coworkers and customers while maintaining Communication Security (COMSEC), Operational Security (OPSEC), and Computer Security (COMPUSEC).</li> <li>Knowledge and understanding of MHE equipment operations and associated hazards required.</li> <li>Will be required to receive training and operate material handling equipment.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Minimum of three years of experience in Traffic Management (TMO)/Air Freight operations or associate degree in a related field of study required.</li> <li>Experience may include but is not limited to import/export, freight acceptance, preparation, handling, cargo shipping/receiving by surface, sea and air data records, container management, customer service, cargo operating computer systems, or other related experience.</li> <li>Possess a current HAZMAT Certification in accordance with AFMAN 24-604 or ability to obtain it upon acceptance of the position.</li> <li>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Experienced in aircraft cargo loading/unloading and cargo tie-down restraint procedures, palletizing cargo on single or multiple 463L pallets using side and top nets, straps, chains, and devices for restraint preferred.</li> <li>Familiarization and certification in AMC Airlift Load Planning, or equivalent, and Joint Inspection process is preferred.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION DESCRIPTION: Position Title: Sr. Instrument Technician Reports to: Instrument Supervisor Department: Maintenance and Operation Department Location: Duqm/Ras Markaz</p><p>JOB PURPOSE: Take job order for maintenance services and overhauls of all Instrumentation &amp; Control equipment and related systems like Compressors, pumps, generators, tanks system and any rotating or static equipment located in the Terminal. In addition, to ensure maintenance activities are carried out as planned within preset time, high quality and as per HSE standards in order to maintain high reliability &amp; availability of Instrument equipment.</p><p>The position will act in accordance with OTTCO s Mission, Vision, Values &amp; Strategies, as well as, policies,</p><p>guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>REPORTING STRUCTURE: Number of Staff Supervised Direct Reports: 0 Total: 0</p><p>KEY RESPONSIBILITIES:</p><p>Perform all Instrumentation activities role in Tank Terminal Industry &amp; Duqm Petrochemical Terminal.</p><p>Prepare and signatory for Permit to Work activities within area of responsibility as licensed and advised by Supervisor and perform operations and maintenance activities in accordance with established company Quality Systems and manufacturers' practices and procedures.</p><p>Ensure the availability of instrumentation, analyzers, control systems, and communication systems in the area, including the best work practices in maintenance.</p><p>Install, maintain, repair, overhaul, calibrate, and test various industrial instruments such as control valves, transmitters, DCS, Fire and Gas Systems, ESD systems, and pressure controls.</p><p>Preform and control all work related to instrument maintenance and calibration and analyze periodic maintenance reports to improve section efficiency.</p><p>Maintain all instrumentation drawings in as-built condition and ensure any modifications are reflected accurately.</p><p>Update, maintain detailed records of maintenance, calibration, and repair activities. Document any modifications made to systems and update technical manuals and drawings as necessary.</p><p>Report any failures of safety-critical elements as per OTTCO standards and oversee the instrumentation side in all assigned locations.</p><p>Maintain a high level of safety awareness and standards in all daily duties and tasks and guide the subordinate staff on safe working practices.</p><p>Report daily activity status and work progress to the Instrument Supervisor and assist in planning, coordinating, and controlling instrumentation work activities.</p><p>Continuously review Instrumentation and Control equipment to identify improvements in operability, reliability, safety, and integrity, and provide written feedback to the Instrument Supervisor.</p><p>Maintain close communication with the Instrument Supervisor prior to work execution and support them by providing leadership, mentoring, and training to Instrument Technicians.</p><p>Coordinate and supervise the work of Instrument Technicians and any sub-contractors personnel working on the terminal facilities associated with the Instrument &amp; Control facilities.</p><p>Promptly respond to callouts for any system or equipment failures, ensuring timely resolution of issues to minimize downtime and maintain operational efficiency.</p><p>Implement the Preventive Maintenance (PM) plan, manage work backlogs and maintain the maintenance KPI.</p><p>Ensure that instrumentation maintenance history and reports are updated in SAP (CMMS), maintenance digitalization and critical issues and repetitive failures by implementing Root Cause Analysis (RCA) recommendations.</p><p>Provide technical support during plant shutdowns</p><p>Participate in instrumentation-related projects, including upgrades, retrofits, and new installations.</p><p>Train and mentor junior technicians, providing guidance and support to help them develop their skills and knowledge.</p><p>Interface with other maintenance/service department staff to coordinate breakdown or routine maintenance work on facilities and plants.</p><p>Full utilization of the use of SAP software to manage the day-to-day planning and scheduling of maintenance activities, ensuring quality control of the work is done and accomplished successfully.</p><p>Effective utilization of service laptops and field-related software, including PLC, TGS, and other instrumentation and control systems, to support day-to-day maintenance activities, diagnostics, troubleshooting, and system monitoring, ensuring work quality, system integrity, and successful task completion.</p><p>Manage spare parts inventory and ensure the availability for overhauls and emergency maintenance critical spares, follow up on spare status to support timely and high-quality work execution, and inspect newly purchased materials and spares upon receipt to ensure compliance with required specifications.</p><p>Ensure all required critical &amp; normal consumables are identified, ordered and stocked at stores.</p><p>Maintain tools and equipment s to be fully operational and in good working order.</p><p>Demonstrate familiarity with QHSE policies, objectives, procedures, and related record-keeping requirements.</p><p>Maintain awareness of emergency preparedness and response measures, as well as the implications of non-conformance with the Integrated Management System requirements, including failure to meet organizational compliance obligations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Qualifications for this position is Diploma in Instrumentation and Control Engineering or equivalent.</p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p>5+ years of experience in Instrumentation and Control Maintenance activities preferably at Oil and Gas Industry</p><p>Background in Instrumentation maintenance best practices.</p><p>requirements, Oil/Gas process &amp; systems procedures and practices</p><p>A good knowledge of relevant operations, HSE requirements, Oil/Gas process &amp; systems procedures and practices.</p><p>Ability to perform as a team player.</p><p>Self-motivated and dependable, demonstrating strong initiative.</p><p>Ability to perform as a team player.</p><p>Ability to deal with change and demonstrate flexibility as required</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>10 year of relevant industry experience 5 years of international experience Hands on experience in performing critical and complex critical lift Suitable experience in handling and managing site rigging teams Through knowledge on LOLER, BS standards and ASME requirements Ability to understand and comprehend engineering analysis. Ability to develop lift plan based on engineering inputs for complex critical lifts. Exposure on working with high capacity cranes 500 MT capacity and above Tandem lifts with minimum of 4 cranes Appointed person certification Technical diploma Proper understanding of technical aspects such as UC, SBC, DAF Ability to communicate with customer Preferred LEEA foundation course Familiarization with operations such as Flipping Roll up Shore to vessel crane operations Tailing operations Experience with Qatar Energy QE approved lifting specialist Fab yard experience and exposure to pancake handling and panel roll up Equipment erection experience.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10 year of relevant industry experience 5 years of international experience Hands on experience in performing critical and complex critical lift Suitable experience in handling and managing site rigging teams Through knowledge on LOLER, BS standards and ASME requirements Ability to understand and comprehend engineering analysis. Ability to develop lift plan based on engineering inputs for complex critical lifts. Exposure on working with high capacity cranes 500 MT capacity and above Tandem lifts with minimum of 4 cranes Appointed person certification Technical diploma Proper understanding of technical aspects such as UC, SBC, DAF Ability to communicate with customer Preferred LEEA foundation course Familiarization with operations such as Flipping Roll up Shore to vessel crane operations Tailing operations Experience with Qatar Energy QE approved lifting specialist Fab yard experience and exposure to pancake handling and panel roll up Equipment erection experience.</p><p></p></section>

<p>The Fuels Manager (FM)/Alternate Site Manager (ASM) provides leadership and guidance to FUELS Department personnel. Responsible for the overall program management of FUELS assets. Manages asset receipts, accountability, serviceability, storage, security, periodic inspections and deployment. Establishes asset reconstitution production schedules to meet United States Air Forces Central (USAFCENT) requirements. Reviews asset reconstitution production, periodic maintenance, and inventory reports to ensure timely and accurate submissions to USAFCENT A4/RF. Provides guidance on environmental issues as they relate to fuel assets. Responsible for program quality assurance as part of ISO 9000 standards. The ASM portion of the position coordinates and oversees the day-to-day operations, maintenance, personnel, and services at assigned location ensuring quality to the customer as directed by Site Manager.</p><p>Job Duties &amp; Responsibilities</p><ul><li>Primary liaison between Amentum sites and USAFCENT on issues pertaining to FUELS.</li><li>Oversees reconstitution and preservation plan for FUELS based upon requirements and the Performance Work Statement (PWS), to include the calibration of meters, gauges and tools, functional testing of pumping systems and hydrostatic testing of fuel hoses.</li><li>Tracks FUELS deployments, ensuring timely delivery of assets.</li><li>Answers inquiries from Program Management and sites concerning various requests from the USAF and external agencies.</li><li>Attends staff meetings and provides management reports and briefings, as required.</li><li>Provides assistance, guidance and coordination on revisions of FUELS maintenance actions in response to changes in Air Force Publications, Technical Orders and the PWS.</li><li>Oversees Product Quality Deficiency Reports from submission to resolution.</li><li>Creates, coordinates, implements, and revises FUELS Standard Operating Procedures, Work Instructions and Training Plans, as required.</li><li>Conducts periodic staff assistance visits to all sites.</li><li>Performs other duties and TDY travel as directed by management.</li><li>Performs duties of Site Manager in Site Manager s absence.</li><li>Manages basic support services and accompanying labor force for assigned location.</li><li>Manages small team of U.S. nationals supervising skilled, semi-skilled foreign and local nationals.</li><li>Ensure that all requirements are met as defined in the Performance Work Statement.</li><li>Communicate new requirements, concerns, and issues to PMO for resolution.</li><li>Ensure that requirements are met for employee health, morale, and welfare.</li><li>Ensure that employees adhere to the Armed Forces and host nation standards of conduct concerning in-theater operations.</li><li>Effectively manage any employee management issues that may arise.</li><li>Closely supervises equipment and material within assigned area of responsibility.</li><li>Closely supervises the arrival, retrofit, and upgrade of equipment and material as assigned.</li><li>Conducts the weekly and monthly collection of data for quality input to PEBs or AFEB.</li><li>Submits timely reports required by the United States Government.</li><li>Conducts regular property inventories.</li><li>Perform other duties as assigned.</li></ul><p>Management Responsibility</p><ul><li>Provides functional management for FUELS issues program wide.</li><li>Manages day-to-day operations as assigned by Site Manager.</li><li>Performs Site Manager duties in Site Manager s absence.</li></ul><p>Knowledge &amp; Skills</p><ul><li>Ability to communicate effectively both verbally and in writing.</li><li>Capable of organizing data quickly and effectively.</li><li>Able to prepare and execute briefings.</li><li>Knowledge of the USAF maintenance management system, to include OLVIMS required.</li><li>Knowledge of the maintenance and operating procedures for Fuels Operational Readiness Capability Equipment (FORCE) desired.</li><li>Knowledge of FUELS industrial safety, quality, environmental procedures, material deficiency reporting and the USAF supply system required.</li><li>Proficiency in Microsoft software applications required, particularly MS Outlook, PowerPoint, Excel, Word, etc.</li><li>Shall be knowledgeable and supervise all aspects of assignment of qualified personnel, scheduling workload, developing programs and procedures to satisfy customer requirements, coordinating with on-base support, preparing official correspondence, evaluating improvement suggestions, and knowledge of chain of command and protocol.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>The Fuels Manager shall have a minimum of six (6) years of specialized experience in fuels hydrant operations and maintenance of bulk petroleum storage terminals.</li><li>The FM/ASM shall have a minimum of three (3) years of experience in logistics, project management, operations management or facilities management/maintenance field.</li><li>As a minimum, the Fuels OM&amp;R Manager shall have two (2) years of supervisory experience in fuel hydrants operations with emphasis in operations and environmental compliance.</li><li>Must be able to obtain and maintain a SECRET US Government Clearance.</li><li>Note: US Citizenship is required to obtain a SECRET Clearance.</li><li>Must have a High School Diploma or equivalent.</li><li>Bachelor s degree preferred but not required.</li><li>Ability to communicate effectively both verbally and in writing.</li><li>Capable of organizing data quickly and effectively.</li><li>Able to prepare and execute briefings.</li><li>Knowledge of the USAF maintenance management system, to include OLVIMS required.</li><li>Knowledge of the maintenance and operating procedures for Fuels Operational Readiness Capability Equipment (FORCE) desired.</li><li>Knowledge of FUELS industrial safety, quality, environmental procedures, material deficiency reporting and the USAF supply system required.</li><li>Proficiency in Microsoft software applications required, particularly MS Outlook, PowerPoint, Excel, Word, etc.</li><li>Shall be knowledgeable and supervise all aspects of assignment of qualified personnel, scheduling workload, developing programs and procedures to satisfy customer requirements, coordinating with on-base support, preparing official correspondence, evaluating improvement suggestions, and knowledge of chain of command and protocol.</li><li>Compliance with fire, safety, and environmental protection requirements.</li><li>Background displaying ability to staff, organize, lead and manage a diverse work force larger than 5 people, particularly Foreign Nationals (FNs).</li><li>Willingness to travel and work in various locations in the world.</li><li>Willingness to work shifts and extended hours in support of 24/7 operations.</li><li>Willingness to learn about the cultural, economic, geopolitical, and/or military issues of the Middle East and/or Arab-speaking countries within that region desired.</li><li>Ability to exercise discretion and make effective decisions.</li><li>Solid communications skills, strong interpersonal skills.</li><li>Strong ability to work as a member of a diverse, dynamic team.</li><li>Outstanding problem-solving skills and sound judgment.</li><li>Must be capable of obtaining a flight line driver license when required by COR.</li><li>Must be capable of obtaining HAZMAT certifications as required by the PWS and/or host nation.</li></ul>

<p><h4>Position summary</h4> <p>Answer, record, log, and process all guest calls, requests, questions, or concerns. Operate telephone switchboard station. Process guest requests for wake-up calls, screening calls, do not disturb, call forwarding, conference calls, TDD relay calls, and non-registered guest calls. Advise guest of any messages received. Monitor busy or unanswered lines, check back with callers on hold to update status, and offer to take a message. Receive, record, and relay messages accurately, completely, and legibly. Activate/deactivate guest room message lights as appropriate. Instruct guests on how to access the internet; transfer guests with problems to provider's customer support line. Test communications equipment to ensure it works properly. Respond to special requests from guests with unique needs. Contact appropriate individual or department as necessary to resolve guest call, request, or problem. Follow up with guests to ensure their requests or problems have been met to their satisfaction. Dispatch bell staff or valet staff as needed.</p> <p>Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs; assist</p><p></p>

<p><h4>Position summary</h4> <p>Answer, record, log, and process all guest calls, requests, questions, or concerns. Operate telephone switchboard station. Process guest requests for wake-up calls, screening calls, do not disturb, call forwarding, conference calls, TDD relay calls, and non-registered guest calls. Advise guest of any messages received. Monitor busy or unanswered lines, check back with callers on hold to update status, and offer to take a message. Receive, record, and relay messages accurately, completely, and legibly. Activate/deactivate guest room message lights as appropriate. Instruct guests on how to access the internet; transfer guests with problems to provider's customer support line. Test communications equipment to ensure it works properly. Respond to special requests from guests with unique needs. Contact appropriate individual or department as necessary to resolve guest call, request, or problem. Follow up with guests to ensure their requests or problems have been met to their satisfaction. Dispatch bell staff or valet staff as needed.</p> <p>Follow all company policies and procedures; report accidents, injuries, and unsafe work conditions to manager; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests’ service needs; assist</p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Testing &amp; Commissioning Roles &amp; Responsibilities</p><br><p>The T&amp;C engineer is responsible for planning test procedures, coordinating with construction teams, verifying equipment installation, and conducting functional and performance tests. Supervisors assist in site inspections, documentation, and ensuring safety compliance. Technicians execute testing activities, record readings, and report abnormalities. Quality and safety teams ensure adherence to regulations and risk control measures. Proper documentation, reporting, and handover to the client are key responsibilities, ensuring the system is reliable, efficient, and ready for operation.</p><br><p>From Basic Cable schedule preparation, LVAC &amp; LVDC Commissioning, GIS &amp; CRP Interlock, Scheme Tests,</p><br><p>Auxiliary Relay Test, Back up Relay Test &amp; Remote End modification works etc</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Duties and Responsibilities</b></p><p>1. General Operational Duties</p><ul><li>Carry out routine farm and site operations including pond preparation, stocking, feeding support, sampling, harvesting, and cleaning activities.</li><li>Follow all operational procedures, biosecurity measures, and hygiene standards across assigned sections.</li><li>Operate and assist in the routine use of farm and processing equipment such as aerators, pumps, blowers, filters, and basic tools.</li><li>Maintain cleanliness and order in work areas, tanks, ponds, and processing sections.</li><li>Adhere strictly to Health, Safety &amp; Environment (HSE) requirements and report unsafe conditions immediately.</li></ul><p>2. GOP (Grow-Out Ponds) Operations</p><ul><li>Assist in pond preparation activities such as cleaning, liming, fertilizing, and water filling.</li><li>Support feeding operations and daily pond monitoring as instructed.</li><li>Assist during sampling, growth checks, and health observation of shrimp.</li><li>Support harvesting activities, including preparation of nets, equipment, and pond areas.</li></ul><p>3. Hatchery &amp; Nursery Operations</p><ul><li>Assist in cleaning, preparation, and maintenance of hatchery and nursery tanks.</li><li>Support routine activities related to larvae and post-larvae handling under supervision.</li><li>Assist in water quality checks and basic monitoring activities.</li><li>Support acclimatization, transfer, and preparation of PLs from hatchery to nursery or grow-out ponds.</li><li>Maintain hygiene and biosecurity within hatchery and nursery facilities.</li></ul><p>4. Processing Plant (PP) Support</p><ul><li>Assist in basic processing operations as assigned by the supervisor.</li><li>Support cleaning, sanitation, and preparation of processing areas and equipment.</li><li>Assist in grading, weighing, packing, and handling of shrimp in accordance with hygiene and quality standards.</li><li>Follow food safety and hygiene procedures strictly during processing activities.</li></ul><p>5. Records &amp; Reporting</p><ul><li>Assist in recording daily operational data such as feeding, harvesting quantities, basic water parameters, and work activities.</li><li>Report any abnormalities, equipment issues, or operational concerns to the supervisor promptly.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Basic technical and operational knowledge of farm or processing activities.</li><li>Ability to follow instructions, SOPs, and safety guidelines accurately.</li><li>Physically fit and able to work in outdoor farm and processing environments.</li><li>Team-oriented with a cooperative attitude and willingness to learn.</li><li>Flexible to work shifts, weekends, and during peak operational periods.</li></ul><p><b>Qualifications &amp; Education</b></p><ul><li>Bachelor s Degree in Marine Science, Aquaculture, Fisheries Science, or a related discipline is mandatory.</li></ul><p><b>Experience</b></p><ul><li>Minimum 1 3 years of relevant experience in shrimp farming, aquaculture operations, hatchery, nursery, grow-out ponds, or processing plant activities.</li><li>Practical site-based experience in farm operations will be given preference.</li><li>Fresh graduates with strong practical experience, including internships, in aquaculture or marine science may be considered.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position Summary The Production Manager is responsible for delivering safe, efficient and cost-effective production across ISFC's canned tuna and sardine operations. The role drives manufacturing excellence by maximizing Overall Equipment Effectiveness (OEE), optimizing raw fish yield, improving labour productivity, reducing unit production costs, minimizing waste, ensuring accurate inventory control, and achieving production targets while maintaining the highest food safety and quality standards. The position will report to the Operations Director</p><p>Key Responsibilities :</p><p>Production Leadership</p><ul><li>Lead daily production of canned tuna and sardines to achieve safety, quality, output and cost objectives.</li><li>Deliver the production plan in coordination with Planning, Supply Chain and Maintenance.</li><li>Ensure compliance with food safety, GMP, HACCP and regulatory requirements.</li></ul><p>Yield Optimisation</p><ul><li>Maximise fish recovery and edible yield throughout thawing, cleaning, cooking, loining, filling and packing.</li><li>Monitor yield losses by process step and implement corrective actions.</li><li>Benchmark yield against international seafood manufacturing best practice.</li></ul><p>Overall Equipment Effectiveness (OEE)</p><ul><li>Improve OEE through higher availability, performance and quality.</li><li>Reduce downtime, changeover losses, micro-stoppages and speed losses.</li><li>Work with Maintenance to implement TPM and preventive maintenance.</li></ul><p>Labour Productivity</p><ul><li>Improve worker efficiency through line balancing, work measurement and standard operating procedures.</li><li>Develop productivity KPIs and incentive programmes.</li><li>Optimise manpower utilisation while maintaining safety and quality.</li></ul><p>Material Optimisation</p><ul><li>Optimise consumption of fish, oil, brine, sauces and other additives.</li><li>Reduce consumption of cans, lids, cartons, labels, shrink film and pallets.</li><li>Minimise giveaway, damage, scrap and rework.</li></ul><p>Cost Management</p><ul><li>Drive continuous reduction in manufacturing cost per case and cost per tonne.</li><li>Identify productivity and waste reduction projects.</li><li>Prepare weekly and monthly production cost reports with variance analysis.</li></ul><p>Inventory Management</p><ul><li>Maintain accurate WIP, packaging and finished goods inventory.</li><li>Ensure FIFO/FEFO compliance and stock accuracy.</li><li>Support monthly stock counts and inventory reconciliation.</li></ul><p>Continuous Improvement</p><ul><li>Lead Lean Manufacturing, Six Sigma and Kaizen initiatives.</li><li>Implement root cause analysis and corrective actions.</li><li>Promote a culture of operational excellence.</li></ul><p>People Leadership</p><ul><li>Coach supervisors and develop production talent.</li><li>Promote safety, teamwork, accountability and high performance.</li></ul><p>Key Performance Indicators (KPIs)</p><ul><li>Production : Production plan attainment (%) Output per shift Capacity utilisation (%)</li><li>Yield Fish yield (%) Raw material loss (%) Giveaway (%)</li><li>OEE Overall Equipment Effectiveness Availability Performance Quality rate</li><li>Labour : Cases per labour hour Labour productivity Overtime control</li><li>Materials Packaging consumption variance Additive consumption variance Waste &amp; scrap reduction</li><li>Cost Manufacturing cost per case Conversion cost per tonne Energy &amp; utility efficiency</li><li>Inventory : Inventory accuracy WIP accuracy Stock losses Cycle count compliance</li><li>Quality &amp; Safety First-pass quality Customer complaints Food safety compliance Lost Time Injury Frequency Rate</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Food Engineering, Industrial Engineering, Mechanical Engineering, Manufacturing or related discipline.</li><li>10+ years of food or seafood manufacturing experience.</li><li>Minimum 5 years leading high-volume production operations.</li><li>Experience with OEE, Lean Manufacturing, TPM and continuous improvement.</li><li>Knowledge of ERP/MES production reporting systems.</li></ul><p><strong>Core Competencies :</strong></p><ul><li>Production planning and scheduling</li><li>Yield optimisation</li><li>Manufacturing cost control</li><li>Inventory management</li><li>Lean Manufacturing</li><li>OEE improvement</li><li>Root cause analysis</li><li>Leadership and coaching</li><li>Data-driven decision making</li><li>Cross-functional collaboration</li></ul><p><strong>Success Profile :</strong></p><ul><li>Consistently achieves production targets safely and efficiently.</li><li>Maximises fish yield and minimises waste.</li><li>Improves OEE and labour productivity year after year.</li><li>Reduces manufacturing cost per unit while protecting quality.</li><li>Maintains accurate inventories and reliable production reporting.</li><li>Builds a disciplined, high-performing production team that supports ISFC's global growth ambitions.</li></ul><p></p></section>

<p><h4>Principal accountabilities</h4> <p>The warehouse operations supervisor is responsible to the site supply manager for the effective management of all functions supporting the Category II Satellite supply account. Responsible for effective supervision of subordinates. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <p>Ensures the condition and identification of all items received, stored, issued, turned-in, shipped or transferred to and from the supply account.</p> <p>Manages the shelf-life program and provides technical assistance to the other functions on site as required.</p> <p>Ensures the inspection of local purchase assets, delivered under contracts that require acceptance.</p> <p>Research part numbers to obtain National Stock Numbers (NSNs) that need loading.</p> <p>Maintains a limited file of technical orders and research materials. Issue items to maintenance quality control and the Time Compliance Technical Order (TCTO) kit monitor to ensure TCTO modifications and preservation are conducted.</p> <p>Establishes an aggressive quality assurance/inspection program to ensure that all Material Storage and Distribution (MS&D) functions are in compliance with applicable warehousing procedures and safety practices. Provides inspection reports to the (MS&D) supervisor and inspected activity.</p> <p>Manages the Material Deficiency Report and Supply Discrepancy Report (SDR) programs.</p> <p>Acts as point of contact for coordination with the Environment Manager on storage requirements for health hazard items.</p> <p>Develops standards for subordinates. Implements the precepts of quality assurance within the guidelines set forth in the ISO 9001 program. Ensures that all work is completed to this quality standard and provides employees with feedback on their progress.</p> <p>Provides on-the-job training to newly assigned personnel.</p> <p>Performs all assigned duties related to the receipt, issue, storage and maintenance of hazardous materials (HAZMAT) and supplies stored on site when tasked.</p> <p>Maintains vendor BPA files.</p> <p>Performs other duties as assigned.</p> <p>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</p> <h4>Minimum requirements</h4> <p>Must be proficient in the use of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p> <p>Knowledge of warehouse layout, design and setup to meet Department of Defense and Occupational Safety and Health Administration safety standards required.</p> <p>Fundamental knowledge of the Department of Defense and USAF or US service equivalent Hazardous Materials Program required.</p> <p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p> <p>Will be required to operate material handling equipment up to 10k forklift.</p> <p>High school diploma or equivalent required.</p> <p>Five to seven years' experience in warehousing and supply chain associated with ILSS required.</p> <p>Must have three years' experience in a supervisory capacity.</p> <p>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</p> <p>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</p> <p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p> <p>Ability to travel domestically and internationally.</p> <h4>Preferred qualifications</h4> <p>Knowledge of USAF or US service equivalent automated system Integrated Logistics System Supply (ILSS) policies and procedures preferred.</p></p><p></p>

<p><h4>Principal accountabilities</h4> <p>The warehouse operations supervisor is responsible to the site supply manager for the effective management of all functions supporting the Category II Satellite supply account. Responsible for effective supervision of subordinates. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <p>Ensures the condition and identification of all items received, stored, issued, turned-in, shipped or transferred to and from the supply account.</p> <p>Manages the shelf-life program and provides technical assistance to the other functions on site as required.</p> <p>Ensures the inspection of local purchase assets, delivered under contracts that require acceptance.</p> <p>Research part numbers to obtain National Stock Numbers (NSNs) that need loading.</p> <p>Maintains a limited file of technical orders and research materials. Issue items to maintenance quality control and the Time Compliance Technical Order (TCTO) kit monitor to ensure TCTO modifications and preservation are conducted.</p> <p>Establishes an aggressive quality assurance/inspection program to ensure that all Material Storage and Distribution (MS&D) functions are in compliance with applicable warehousing procedures and safety practices. Provides inspection reports to the (MS&D) supervisor and inspected activity.</p> <p>Manages the Material Deficiency Report and Supply Discrepancy Report (SDR) programs.</p> <p>Acts as point of contact for coordination with the Environment Manager on storage requirements for health hazard items.</p> <p>Develops standards for subordinates. Implements the precepts of quality assurance within the guidelines set forth in the ISO 9001 program. Ensures that all work is completed to this quality standard and provides employees with feedback on their progress.</p> <p>Provides on-the-job training to newly assigned personnel.</p> <p>Performs all assigned duties related to the receipt, issue, storage and maintenance of hazardous materials (HAZMAT) and supplies stored on site when tasked.</p> <p>Maintains vendor BPA files.</p> <p>Performs other duties as assigned.</p> <p>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</p> <h4>Minimum requirements</h4> <p>Must be proficient in the use of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p> <p>Knowledge of warehouse layout, design and setup to meet Department of Defense and Occupational Safety and Health Administration safety standards required.</p> <p>Fundamental knowledge of the Department of Defense and USAF or US service equivalent Hazardous Materials Program required.</p> <p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p> <p>Will be required to operate material handling equipment up to 10k forklift.</p> <p>High school diploma or equivalent required.</p> <p>Five to seven years' experience in warehousing and supply chain associated with ILSS required.</p> <p>Must have three years' experience in a supervisory capacity.</p> <p>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</p> <p>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</p> <p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p> <p>Ability to travel domestically and internationally.</p> <h4>Preferred qualifications</h4> <p>Knowledge of USAF or US service equivalent automated system Integrated Logistics System Supply (ILSS) policies and procedures preferred.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Snr / Technician Analyzers Stream OQ8 Function Maintenance Department Electrical and Instrumentation Section Location Oman Duqm Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Supervisor Analyzers Direct reports</p><p>Job purpose:</p><p>Perform Instrument service repair at the designed location, under Supervisor Analyzers scope, as the focal point of contact; through (1) Executing routine maintenance, and troubleshooting of Instrument Analyzers in designated areas / Plants (including process, utility, power generation, workshop, offices, laboratory) while observing safety rules and contributing in the achievement of KPIs, as per Department Business Plan, (2) Installing and maintaining the operational integrity of Analyzers equipment and systems, and (3) Calibration, installation and repair of Analyzers, and use of calibration and test equipment, in order to minimize downtime, cost-effective and ensure the reliability, availability of equipment.</p><p>The position will act in accordance with the OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Oman s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Main Responsibilities:</p><p>Scope of Work - Areas</p><p>Heavy Oil Complex Operation (CDU, VDU, SGP, LTU, KTU, DCU, and UGP)</p><p>Hydro Processing Complex (HCU/ARU/SWS/DHT/HPU/PSA)</p><p>Sulfur/Utilities/WWTP Complex Operations (SRU, TGTU, ARU, CRU, SSW, CSW, BFW, Steam Generation, Air, N2, CWT, WWTP)</p><p>Offsite/Logistics Complex (Receiving Terminal, Refinery Tankage, Product Dispatch, Coke and Sulfur Handling, Flare, Buildings)</p><p>Instrument / Analyzer</p><p>Collects data from the field and reports them through proper communication channels.</p><p>Receives assignments or work orders from Instrument/Analyzer Supervisors and coordinates activities with other technicians and operators for solving problems with instrumentation equipment.</p><p>Perform routine maintenance, calibration, and testing of analytical instruments to ensure accurate measurements and compliance with safety and environmental regulations.</p><p>Diagnose and resolve issues with analytical equipment, including performing repairs and modifications as necessary using precision tools, PCs and special tools such as Fieldbus and HART Communicators.</p><p>Install, maintain, repair, and calibrate various types of analyzers sensors and detectors for flow, level, pressure, temperature, GC, TOC, pH/ORP, Conductivity, Oxygen, Moisture, and wide variety of environment and process gas analyzers.</p><p>Strong understanding of electrical, mechanical, and computerized systems related to analytical instruments.</p><p>Ability to troubleshoot complex issues and implement effective solutions.</p><p>Maintain detailed records of maintenance activities, calibration results, and repairs performed on equipment.</p><p>Key interactions</p><p>Internal: All Maintenance Managers &amp; Engineers, Planners, Operations, Procurement, Logistic &amp; HSE</p><p>External: Contractors, Vendors &amp; Suppliers</p><p>Notable Working Conditions. Field Operations and office environment. Moderate to intensive computer screen use. Shift</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma in Electronic &amp; Telecommunication or Instrument or Electrical Engineering</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Diploma Technician 2 years of relevant experience</li><li>Sr. Technician 4 years of relevant experience</li><li>Experience as Analyzer or Instrument Technician</li><li>Knowledge of refinery and petrochemical plant operations.</li><li>Experience in static equipment maintenance, Workshop activities.</li><li>Experience in workshop testing and repair techniques</li><li>Proficiency in M/S Office.</li><li>Communication skills.</li><li>Customer service skills.</li><li>Refining and petrochemical industry.</li><li>Static Oil &amp; Gas equipment (columns, vessels, furnaces etc.).</li><li>Oil and gas piping basic</li><li>Ability to read relevant technical drawings and specifications;</li><li>Hand and power tools</li><li>Measuring and testing devices.</li><li>Result oriented.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>JOB PURPOSE: To perform and actively engage in civil works related to the construction, maintenance, and repair of civil structures within ADC premises. This includes executing assigned tasks in accordance with approved drawings, technical specifications, and project requirements with strict adherence to ADC s health, safety, and environmental (HSE) policies is required to ensure a safe working environment and compliance with all applicable regulations</p><p>KEY ACCOUNTABILITIES:</p><p>Day to Day Operations</p><ul><li>Perform onsite day to day civil works repair, surveying works, Maintaining the Inspection checklists, building and maintenance works such as damages in dry dock structures repair, yard pavement repair, production shops building and plants structure repair, crane rail maintenance and repair, utility pipe leakage repair, utility trench &amp; manhole maintenance.</li><li>Works includes also machine and tools operations, construction of new structures such as shelters for machines, generators and other civil related works in ADC premises.</li></ul><p>Coordination</p><ul><li>Coordinate with the Civil maintenance Foreman on all technical areas such as use of equipment, civil works process and technical drawings and sketches in order to ensure the projected schedule will be met.</li></ul><p>Material Requirements and Use</p><ul><li>Coordinate with the Civil maintenance Foreman if and when required by the civil maintenance section in order to ensure the materials/tools/equipment are provided timely and accurately to complete job requirements.</li><li>Also, control the use of materials in order to minimize losses.</li></ul><p>Policies, Systems, Processes &amp; Procedures</p><ul><li>Follow all relevant Production Support departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.</li></ul><p>Quality, HSSE</p><ul><li>Adhere to and ensure compliance with all relevant health, safety, security and environment procedures, standards, controls and systems across ODC to guarantee employee safety and security, compliance with quality &amp; procedures, and a responsible environmental attitude.</li></ul><p>COMMUNICATIONS &amp; WORKING RELATIONSHIPS:</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School Certificate training for civil works</li><li>3 years of relevant experience in civil maintenance/construction jobs.</li><li>Knowledge and understanding of the civil construction/maintenance system and how to implement.</li><li>Adherence to safety policies/procedures</li><li>Communication and interpersonal skills</li><li>Exposure to ISO 9001:2015 standards</li></ul><p></p></section>

<p><h4>Position summary</h4> <p>Complete opening and closing duties including setting up necessary supplies and tools, cleaning all equipment and areas, locking doors, etc. Set up, stock, and maintain work areas. Input orders into cash register system and collect payment from customer. Take orders, record in MICROS system and prepare food and coffee beverages. Ensure that appliances (e.g., coffee makers) are turned on/off at the appropriate times. Bus coffee cart areas and tables. Clean dishes, utensils, work areas, tables, and equipment throughout the day. Obtain change required for expected business level. Count bank at end of shift, complete designated cashier reports, resolve any discrepancies, drop off receipts, and secure bank.</p> <p>Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<p><h4>Position summary</h4> <p>Complete opening and closing duties including setting up necessary supplies and tools, cleaning all equipment and areas, locking doors, etc. Set up, stock, and maintain work areas. Input orders into cash register system and collect payment from customer. Take orders, record in MICROS system and prepare food and coffee beverages. Ensure that appliances (e.g., coffee makers) are turned on/off at the appropriate times. Bus coffee cart areas and tables. Clean dishes, utensils, work areas, tables, and equipment throughout the day. Obtain change required for expected business level. Count bank at end of shift, complete designated cashier reports, resolve any discrepancies, drop off receipts, and secure bank.</p> <p>Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>1. Assist the Clinical Skills Lab Supervisor in the proper maintenance of the Clinical Skills Lab facility, equipment and materials.</p><p>2. Assist the Clinical Skills Lab Supervisor to conduct training courses for students and teachers at Suhar and Rustaq campus</p><p>3. Assist the Clinical Skills Lab Supervisor in conducting the short courses for the community</p><p>4. Assist with training sessions and lab usage.</p><p>5. Maintain accurate records of sessions, attendance, and equipment use.</p><p>6. Any other duties assigned by the Line Manager.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Master s degree in nursing with minimum of 5 years postmaster or Other Related Health Sciences</li><li>Bachelor s degree in nursing science with 15 years of bedside experience</li><li>3-5 Years of Simulation, Skills Labs, or Related Educational Technology (Preferable)</li><li>5-10 years of medical / nursing education and training.</li><li>Proficiency in English is a must.</li><li>Certified trainer in BLS, ACLS, PALS and other relevant programs preferred</li><li>Certified Modeling &amp; Simulation Professional program preferred, but not mandatory</li><li>Experience with organizing and conduction short courses or workshops.</li><li>Experience in IT support environment</li><li>Experience with Microsoft office</li><li>Experience with audio/visual systems</li><li>Age from: 25 45</li><li>OMANI CANDIDATES ONLY.</li></ul><p></p></section>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <h4>Position overview:</h4> <p>The F-16 C/D Electrical and Environmental (E&E) Specialist fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and when necessary, modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of system components.</p> <h4>Duties & responsibilities:</h4> <ul> <li>Performs and supervises aircraft electrical and environmental (E&E) functions and activities performing as an experienced 5 Level Journeyman or 7 Level Craftsman.</li> <li>Troubleshoots, inspects, removes, installs, repairs, modifies, overhauls, and operates aircraft E&E systems, components, and associated support equipment.</li> <li>Uses technical data, wiring diagrams, ohm meters, electronic measuring equipment, GSE and special tools. Expert level in accomplishing and training of wire repair procedures.</li> <li>Uploads operational software, flight programs (OFP) into system components and maintains currency and software upgrade efficiency.</li> <li>Expert level to inspect, analyze and evaluate electrical and environmental systems malfunctions, aircraft heating/air conditioning, avionics cooling, cabin pressure, OBOGS, fire and overheat detection systems, AC power system, DC power system, external power system, lighting system to include exterior, interior, emergency, position lights, anti-collision, formation, slipway lights, taxi light.</li> <li>Remove, install, adjust, operational check, bench-check, service the following: landing gear system, handle, control switches, arresting hook indication/canopy indication/overheat fire/master caution/fuel warning and control systems, anti-skid, brake holding, nose gear steering, secondary flight control, engine bleed air, fire extinguishing system, squibs, fire bottles, start and ignition/air conditioning/pressurization systems and liquid cooling systems.</li> <li>Interprets inspection findings and determines adequacy of corrective actions.</li> <li>Reviews maintenance management publications, time compliance technical orders and procedures for accuracy and currency, confirms corrective actions and accuracy of aircraft maintenance records.</li> <li>Recommends methods to improve equipment performance and maintenance procedures. Acts as quality assurance for the trade.</li> <li>Performs OJT and instruction, supervises and accepts work performed by RAFO technicians, acts as supervisor and mentor for the shop and directs daily maintenance performed.</li> <li>Required to perform assigned tasks within your work center that directly supports necessary functions of this job classification.</li> </ul> <h4>Requirements:</h4> <ul> <li>Recent, 5 years F-16 electrical and environmental (E&E) Block 40 or above experience.</li> <li>Very experienced 2A6X6 5 level or 7 skill level or equivalent with proven record of F-16 flightline (Organizational) or back shop (Intermediate) maintenance environment.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma or equivalent required.</li> <li>Current passport.</li> <li>Clearance requirements: Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</li> </ul> <h4>Preferences:</h4> <ul> <li>Air Force AFSC 2A656 or 2A676 with F-16 Block 30/50 experience.</li> <li>Block 50 experience.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p> <p> Bachelor of Nursing, with Certification in Advanced Emergency Medical Technician (EMT) or equivalent, and preferably with Certification in Occupational Health Nursing. </p> <p> Training certification in the following subjects, which shall be valid at the beginning and throughout the contract, with third-party international certification: </p> <p> Basic Life Support (BLS) </p> <p> Prehospital Trauma Life Support (PHTLS) </p> <p> Advanced Cardiovascular Life Support (ACLS) </p> <p> START Triage Certification </p> <p> First Aid Instructor (AHA Heartsaver) </p> <p> HACCP Level 3 Food Safety </p> <p> ECG and Airway Management </p> <p> ISO 45001 Auditor Certification </p> <p> Limited X-ray Machine Operator (LXMO) or equivalent (only for Block 60 - Bisat) </p> <p> Air Ambulance Operations Training (only for Musandam) </p> <p> Medical Review Officer (MRO) Certification (only for Musandam) </p> <p> 5 years of experience in emergency department or emergency medical service, preferably with experience in working at Onshore, Offshore, Refinery, Petrochemical or Petroleum processes. </p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Do you picture yourself as a Duty Engineer? At Crowne Plaza Resort Salalah, our goal is to make business travel work — and that’s where YOU come in.</span></p><br><p><span>When you join Crowne Plaza Resort Salalah, you are more than just your job title. We look for energetic, confident, and ambitious individuals who excel in their roles and help our guests succeed.</span></p><br><p><span>Set on 45 acres of beautiful tropical gardens and a long stretch of pristine sandy beach, Crowne Plaza Resort Salalah is perfectly positioned for business, meetings, and leisure travel.</span></p><br><p><span>As a Duty Engineer, you will play a vital role in maintaining the hotel's building systems, guest rooms, and public areas to the highest standards. You will ensure all engineering operations support an exceptional guest experience while promoting safety, sustainability, and cost-effective maintenance.</span></p><br><p><span>A little taste of your day-to-day</span></p><br><ul><li><p><span>Perform preventive and corrective maintenance on electrical, mechanical, HVAC, plumbing, and other building systems.</span></p><br></li><li><p><span>Respond promptly to guest maintenance requests and operational emergencies.</span></p><br></li><li><p><span>Inspect guest rooms, public areas, and back-of-house facilities to ensure they meet IHG brand standards.</span></p><br></li><li><p><span>Troubleshoot equipment faults and carry out repairs efficiently to minimize downtime.</span></p><br></li><li><p><span>Monitor the performance of plant and engineering equipment, reporting any defects or major maintenance requirements.</span></p><br></li><li><p><span>Ensure compliance with health, safety, fire, and environmental regulations and hotel policies.</span></p><br></li><li><p><span>Support energy conservation and sustainability initiatives by promoting efficient use of utilities and resources.</span></p><br></li><li><p><span>Maintain engineering tools, equipment, and maintenance records accurately.</span></p><br></li><li><p><span>Work closely with other hotel departments to support daily operations and deliver excellent guest service.</span></p><br></li></ul><p><span>What do we need from you?</span></p><br><ul><li><p><span>Diploma or certification in Electrical, Mechanical, HVAC, or a related Engineering discipline.</span></p><br></li><li><p><span>Minimum of 3 years' experience in hotel engineering or facilities maintenance, including at least 2 years of experience in GCC countries.</span></p><br></li><li><p><span>Strong knowledge of electrical, plumbing, HVAC, mechanical systems, and general building maintenance.</span></p><br></li><li><p><span>Proven ability to troubleshoot, repair, and maintain hotel engineering systems efficiently.</span></p><br></li><li><p><span>Good communication, teamwork, and problem-solving skills.</span></p><br></li><li><p><span>Service-oriented with the ability to work independently and under pressure.</span></p><br></li><li><p><span>Willingness to work flexible shifts, including weekends, public holidays, and emergency call-outs when required.</span></p><br></li></ul><br>At IHG, we’ve made a promise. As one of the world’s leading hotel groups, we’re here to deliver True Hospitality for Good. Making our guests and colleagues feel welcome, cared for, recognised and respected – wherever they are in the world. Want to be part of the journey? </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Purpose</p><p>The CMMS Engineer is responsible for managing, developing, and optimizing the Computerized Maintenance Management System (CMMS) to support effective maintenance planning, asset management, work order control, and equipment reliability across the organization.</p><p>Key Responsibilities</p><ul><li>Administer and maintain the CMMS platform to ensure accurate and efficient maintenance operations.</li><li>Create, update, and manage equipment master data, asset registers, and maintenance plans.</li><li>Generate and manage work orders, preventive maintenance schedules, and maintenance notifications.</li><li>Monitor maintenance activities and ensure timely completion of work orders.</li><li>Analyze maintenance data to identify trends, failures, and improvement opportunities.</li><li>Develop KPIs, dashboards, and performance reports related to maintenance activities.</li><li>Support maintenance planning and scheduling with operations and maintenance teams.</li><li>Ensure data accuracy, integrity, and consistency within the CMMS system.</li><li>Assist in system upgrades, configuration, testing, and implementation of improvements.</li><li>Provide training and technical support to CMMS users.</li><li>Coordinate with engineering, procurement, and maintenance teams for effective asset management.</li><li>Ensure compliance with company maintenance standards and asset management best practices.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications</strong></p><p>Bachelor s Degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, Computer Engineering, Information Technology, or related field.</p><p><strong>Experience</strong></p><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic exposure in maintenance systems or asset management is an advantage.</p><p><strong>Technical Skills</strong></p><ul><li>Basic knowledge of CMMS/EAM systems and maintenance workflows.</li><li>Understanding of preventive and corrective maintenance concepts.</li><li>Familiarity with data analysis and reporting tools.</li><li>Basic knowledge of asset management principles.</li><li>Awareness of industrial maintenance operations and equipment lifecycle.</li><li>Proficiency in Microsoft Excel and reporting tools.</li></ul><p><strong>Soft Skills</strong></p><ul><li>Strong willingness to learn and develop technical skills.</li><li>Good analytical and problem-solving abilities.</li><li>Strong attention to detail and data accuracy.</li><li>Good communication and teamwork skills.</li><li>Ability to manage tasks under supervision and meet deadlines.</li></ul><p><strong>Working Conditions</strong></p><p>Office-based with occasional site visits. May require support during maintenance shutdowns or system updates.</p><p><strong>Application Note</strong> :</p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul><p></p></section>