Embedded Systems Engineer Jobs in Oman

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a national operator to source a PCC HVAC Supervisor. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>4th quarter of 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning activities</strong></p> <ul> <li>Supervise HVAC pre commissioning and commissioning activities at site level</li> <li>Execute approved HVAC commissioning procedures and method statements</li> <li>Ensure HVAC systems are mechanically complete and ready for commissioning</li> <li>Support functional testing, start up, and performance testing of HVAC systems</li> <li>Identify, report, and assist in resolving commissioning issues and punch points</li> </ul> <p><strong>HVAC systems scope</strong></p> <ul> <li>Supervision of commissioning activities for: <ul> <li>Air handling units (AHUs)</li> <li>Chilled water and DX systems</li> <li>Packaged and split HVAC units</li> <li>Ventilation, exhaust, and pressurization systems</li> <li>Ducting, dampers, louvers, and insulation</li> <li>HVAC controls and basic instrumentation</li> </ul> </li> <li>Ensure systems are commissioned in line with design intent and operational requirements</li> </ul> <p><strong>Site supervision & coordination</strong></p> <ul> <li>Supervise technicians, subcontractors, and commissioning crews</li> <li>Coordinate daily activities with construction, electrical, and instrumentation teams</li> <li>Interface with commissioning engineers and vendors during testing activities</li> <li>Participate in system walkdowns, punch listing, and punch clearance</li> <li>Support handover activities and system acceptance</li> </ul> <p><strong>HSE & quality compliance</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE requirements</li> <li>Conduct toolbox talks and ensure safe work practices are followed</li> <li>Report unsafe conditions, incidents, and near misses</li> <li>Ensure quality documentation is completed accurately and on time</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Maintain daily commissioning activity records</li> <li>Support preparation and completion of test sheets and commissioning dossiers</li> <li>Provide progress updates to commissioning engineers and supervisors</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Diploma or bachelor’s degree in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 7–12 years of experience in HVAC installation, pre commissioning, and commissioning</li> <li>Previous experience on oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Site based commissioning experience within EPC project environments</li> <li>Middle East project experience is preferred</li> </ul> <p><strong>Technical skills</strong></p> <ul> <li>Strong hands on knowledge of HVAC systems and commissioning practices</li> <li>Ability to read and interpret drawings, layouts, datasheets, and procedures</li> <li>Familiarity with international standards such as ASHRAE, SMACNA, NFPA</li> <li>Practical troubleshooting skills during system start up and testing</li> </ul></p><p></p>

<p><br></p><p>Welding Engineer - Job Description</p><p>Job Title: Welding Engineer</p><p>Job Summary: A Welding Engineer is responsible for planning, developing, supervising, and improving welding processes to ensure the quality, safety, and efficiency of fabrication and construction activities. They ensure compliance with industry standards, project specifications, and quality requirements in manufacturing, oil &amp; gas, construction, power, and infrastructure projects.</p><p>Key Responsibilities</p><ul><li>Develop, review, and approve Welding Procedure Specifications (WPS) , Procedure Qualification Records (PQR) , and Welder Qualification Records (WQTR/WPQ) .</li><li>Monitor and control welding activities to ensure compliance with project specifications, codes, and standards (ASME, AWS, API, ISO, EN, etc.).</li><li>Provide technical support and guidance to welders, supervisors, inspectors, and project teams.</li><li>Evaluate welding techniques, materials, consumables, and equipment for suitability and efficiency.</li><li>Investigate welding defects, failures, and non-conformities and implement corrective actions.</li><li>Coordinate with Quality Control (QC), Non-Destructive Testing (NDT), and production teams.</li><li>Review engineering drawings, material specifications, and fabrication requirements.</li><li>Ensure proper implementation of welding procedures and heat treatment requirements.</li><li>Conduct welding procedure qualification tests and welder performance qualification tests.</li><li>Monitor productivity, welding parameters, consumable usage, and project schedules.</li><li>Ensure compliance with safety regulations and environmental requirements.</li><li>Prepare technical reports, welding documentation, and inspection records.</li></ul><p>Required Qualifications</p><ul><li>Bachelor's Degree in Mechanical Engineering , Welding Engineering , Metallurgical Engineering, or related field.</li><li>Professional certifications such as:</li><ul><li>AWS Certified Welding Inspector (CWI) (preferred)</li><li>International Welding Engineer (IWE) (preferred)</li><li>CSWIP 3.1/3.2 (advantageous)</li></ul><li>Knowledge of international codes and standards:</li><ul><li>ASME Section IX</li><li>ASME B31.3/B31.1</li><li>AWS D1.1</li><li>API 1104</li><li>ISO 3834</li></ul></ul><p>Required Skills</p><ul><li>Strong knowledge of welding processes:</li><ul><li>SMAW</li><li>GTAW (TIG)</li><li>GMAW (MIG)</li><li>FCAW</li><li>SAW</li></ul><li>Understanding of metallurgy and heat treatment.</li><li>Knowledge of NDT methods (RT, UT, MT, PT).</li><li>Ability to interpret engineering drawings and specifications.</li><li>Root cause analysis and problem-solving skills.</li><li>Strong communication and leadership abilities.</li><li>Proficiency in MS Office and welding management/documentation systems.</li></ul><p>Experience Requirements</p><ul><li>5-10+ years of experience in welding engineering, fabrication, construction, or oil &amp; gas projects.</li><li>Experience in pressure vessels, pipelines, structural steel, tanks, or process piping projects.</li><li>Familiarity with EPC projects and quality management systems.</li></ul><p>Key Performance Indicators (KPIs)</p><ul><li>Welding rejection/repair rate.</li><li>Productivity and welding efficiency.</li><li>Compliance with project quality requirements.</li><li>Number of qualified welders and procedures.</li><li>Safety performance and incident reduction.</li><li>On-time completion of welding activities.</li></ul><p>Reporting Structure</p><p>Reports To: QA/QC Manager, Fabrication Manager, Construction Manager, or Project Manager</p><p>Supervises: Welding Supervisors, Welders, Welding Technicians, and Welding Inspectors (as applicable).</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Mechanical Engineering , Welding Engineering , Metallurgical Engineering, or related field.</li><li>Professional certifications such as:<ul><li>AWS Certified Welding Inspector (CWI) (preferred)</li><li>International Welding Engineer (IWE) (preferred)</li><li>CSWIP 3.1/3.2 (advantageous)</li></ul></li><li>Knowledge of international codes and standards:<ul><li>ASME Section IX</li><li>ASME B31.3/B31.1</li><li>AWS D1.1</li><li>API 1104</li><li>ISO 3834</li></ul></li><li>Strong knowledge of welding processes:<ul><li>SMAW</li><li>GTAW (TIG)</li><li>GMAW (MIG)</li><li>FCAW</li><li>SAW</li></ul></li><li>Understanding of metallurgy and heat treatment.</li><li>Knowledge of NDT methods (RT, UT, MT, PT).</li><li>Ability to interpret engineering drawings and specifications.</li><li>Root cause analysis and problem-solving skills.</li><li>Strong communication and leadership abilities.</li><li>Proficiency in MS Office and welding management/documentation systems.</li><li>5-10+ years of experience in welding engineering, fabrication, construction, or oil &amp; gas projects.</li><li>Experience in pressure vessels, pipelines, structural steel, tanks, or process piping projects.</li><li>Familiarity with EPC projects and quality management systems.</li></ul>

<p><br></p><p>- A) Senior Estimation &amp; Proposal Engineer</p><p>1) Degree in Mechanical Engineering.</p><p>2) 8+ years of experience in Estimation &amp; Proposal writing</p><p>3) Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</p><p>4) Strong knowledge of international codes and standards</p><p>5) Strong knowledge of international codes and standards</p><p>6) Experience in bidding for long-term contracts is an added advantage.</p><p>7) Familiarity with local construction codes and regulations.</p><p>8) Working knowledge of PDO, OQ, and Oxy specifications.</p><p>9) Experience in contract processing and contract management.</p><p>10) GCC / Oman experience is a must</p><p>- B) Sales Engineer (Rotating &amp; Static)</p><p>5 Years of experience require</p><p>1) Degree in Mechanical / Chemical Engineering.</p><p>2) Identify, target and create prospects for business development.</p><p>3) Sales and marketing activities for the Principal / representing companies and their products.</p><p>4) Manage various aspects of project information in to competitive intelligence system</p><p>5) Networking with key personnel of both clients and Principals</p><p>6) To meet or exceed sales targets consistently</p><p>7) Responsible for sending product information, proposals and quotes, correspondence to follow up and to generate new sales, and maintaining accurate database of all contact interactions</p><p>8) To prepare tenders for various projects involving equipment</p><p>9) Reporting to the Sales Manager</p><p>10) GCC / Oman experience is a must</p><p>- C) Painting &amp; Coating Inspector</p><p>1) Diploma / Degree in Mechanical, Chemical, or related engineering discipline.</p><p>2) Minimum 5 years of experience in painting/coating inspection for oil &amp; gas, industrial, or EPCC projects in Oman or the GCC, including workshop / manufacturing environments.</p><p>3) Valid BGAS or NACE Level II Coating Inspector certificate (mandatory).</p><p>4) Hands-on expertise in inspection of piping external, vessel internal/external, and storage tank internal/external painting/coating applications.</p><p>5) Solid knowledge of applicable international codes and standards.</p><p>- D) QCI Painting Inspector</p><p>1) Diploma / Degree.</p><p>2) Minimum 5 years in these Minimum 3 years overseas experience in QA / QC Painting Inspector works, for Refinery / Petrochemical / Oil &amp; Gas Projects (Storage Tanks, Pressure Vessel, Piping &amp; Structure).</p><p>3) Well experienced in Tank internal / external painting system including GRE coating.</p><p>4) Knowledge in ASTM, ISO, SSPC and NACE</p><p>- E) HSE Officer</p><p>1) Bachelor s degree in Occupational Health &amp; Safety, Environmental Science, Engineering, or related field.</p><p>2) HSE certification (NEBOSH, IOSH, OSHA, etc.) is highly desirable</p><p>3) 3-5 years of experience in a safety role, preferably in the oil and gas / Petrochemical / Refinery industry.</p><p>- F) Senior Planning &amp; Project Control Engineer</p><p>1) Diploma / B. Tech / BE, Mechanical Engineering. PMP Certification.</p><p>2) 15+ years related experience and minimum 8+ years experience in the Planning engineer position with independently preparing project construction plans and schedules with resources schedules (Manpower/Materials/Equipment), control of major EPC Projects in Oil &amp; Gas industry and Fabrication Shop</p><p>3) Capable of preparing Project planning deliverables, Master schedules and Issuance of company procured and Client supply materials.</p><p>4) Progress reporting (External to Clients &amp; Internally to Management) including updating, monitoring and project controls. Responsible for development of Work breakdown Structure, Earned value and performance measurement for each project.</p><p>5) Coordinate between Engineering, Procurement, Suppliers and Construction teams during design and construction phases.</p><p>6) Experience in managing multiple subcontractors with high value subcontracts.</p><p>7) Independently manage planning and project control functions for EPC projects.</p><p>8) Prepare and update baseline schedules using Primavera (P6) or equivalent tools.</p><p>9) Track progress and prepare daily, weekly, and monthly reports.</p><p>10) Conduct delay analysis and propose mitigation plans. Issue cost reports and VOWD reports.</p><p>- G) Permit Holder (Mechanical)</p><p>1) Diploma / Degree in Mechanical Engineering.</p><p>2) (PDO/ OQ valid permit cards preferred)</p><p>- H) Senior HR Executive (Chennai Location)</p><p>1) MBA in Human Resource.</p><p>2) Must be having 2-5 years experience in recruitment for workmen and staff category.</p><p>3) Lead end-to-end recruitment process, attracting the most suitable candidate to support business objectives. (Blue &amp; White Collar)</p><p>4) Collaborate with line managers and division head, to understand manpower needs and ensure a streamlined recruitment experience.</p><p>5) Domestic Travelling required, as per work scope.</p><p>6) Foster positive employee relations by addressing concerns, resolving conflicts, and promoting collaborative work environment.</p><p>7) Coordinate with team to understand the training requirement.</p><p>8) Oversee the performance management process, ensure fair and transparent evaluation.</p><p>9) Work closely with division to set the performance expectation and to provide feedback to the employee.</p><p>10) Manage and administer the monthly payroll and C&amp;B program.</p><p>11) Ensure compliance with relevant labour laws and industry standards.</p><p>12) Devise the compensation schemes and implement to ensure employee motivation.</p><p>13) Develop and update HR policies and procedures, ensuring alignment with legal requirements and best practices.</p><p>14) Stay informed about the changes in labor laws and update organization policies accordingly.</p><p>15) Update the ISO audit related documents.</p><p>16) Collaborate with relevant stakeholders to create a positive and supportive work environment.</p><p>17) Organize orientation for new employees and exit interview.</p><p>18) Organize the camp inspection with the support of Admin, so a better living environment.</p><p>19) Maintain records for each employee.</p><p>20) Establish and maintain medical service providers, ensuring their continuous development.</p><p>21) Evaluate and select insurance policies and vendors.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>1) Diploma / Degree in Mechanical, Chemical, or related engineering discipline.</p><p>2) Minimum 5 years of experience in painting/coating inspection for oil &amp; gas, industrial, or EPCC projects in Oman or the GCC, including workshop / manufacturing environments.</p><p>3) Valid BGAS or NACE Level II Coating Inspector certificate (mandatory).</p><p>4) Hands-on expertise in inspection of piping external, vessel internal/external, and storage tank internal/external painting/coating applications.</p><p>5) Solid knowledge of applicable international codes and standards.</p>

<p><br></p><p><b>About the Role</b></p><p>To carry out maintenance, installation, overhauling and modification activities on plant s electrical machinery and equipment in accordance with standard maintenance procedures, HSE guidelines and quality standards to attain effective functionality and reliability.</p><p>Carry out required daily electrical maintenance work and routine preventative electrical maintenance work according to set schedule and ACWA NOMAC procedures to facilitate continuous operations.</p><p>Monitor the physical condition of all equipment in assigned plant and report non-conformances to Electrical Engineer / Electrical Supervisor to facilitate effective maintenance of all ACWA NOMAC facilities as per set Quality/ HSE standards.</p><p>Respond to electrical failures and implement corrective actions in adherence with procedures and guidelines to reduce downtime and maximize functionality of equipment.</p><p>Trouble shoot using necessary tools which include diagnosis, repairing and testing circuit or wiring faults; locating faults in cables to validate that all connection points and cables are capable of withstanding capacity voltages.</p><p>Diagnose causes of electrical malfunction or failure of operational equipment such as transformers, motors, relays, switches and control and monitoring devices and take corrective measures in collaboration with Electrical Engineer / Electrical Supervisor.</p><p>Read and understand technical manuals, wiring diagrams etc., and apply the knowledge to carry out maintenance and troubleshooting tasks, to prepare for the electrical maintenance to equipment in the assigned area.</p><p>Align, adjust and calibrate equipment according to specifications and to maintain records of repairs, calibrations and tests.</p><p>Inventory:</p><p>Check the necessary stock levels of spare parts to support effective inventory Control.</p><p>Documentation:</p><p>Update the maintenance logbook and record details of work carried out including defaults, problems, various findings and conditions of all equipment to ensure timely availability of information and organised referencing.</p><p>Continous Improvement:</p><p>Contribute in the identification and implementation of change initiatives, programmes and projects in line with the organisation s standards.</p><p>Policies, Processes, Systems &amp; Procedures</p><p>Adhere to all relevant organisational and departmental policies, processes, standard maintenance procedures and instructions so that work is carried out to the required standard and in a consistent manner.</p><p>Health,Safety, Security &amp; Environment</p><p>Adhere to all relevant health, safety, security and environmental procedures, instructions and controls so that the safety of employees and environmental compliance can be guaranteed.</p><p>Related Assignments</p><p>Perform any other duties which the line manager may require to be carried out.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>A technical certificate / Associate s Diploma in Electrical maintenance.</li><li>3-5 years experience in electrical maintenance as a technician in installation, maintenance and repair of electrical equipment and installations in a plant environment.</li><li>Practical Knowledge of relevant plant equipment</li><li>Awareness of HSE &amp; quality standards</li><li>Team work and effective collaboration skills</li><li>ISO awareness/working knowledge is preferred</li></ul>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a national operator to source a PCC HVAC Supervisor. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>4th quarter of 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning activities</strong></p> <ul> <li>Supervise HVAC pre commissioning and commissioning activities at site level</li> <li>Execute approved HVAC commissioning procedures and method statements</li> <li>Ensure HVAC systems are mechanically complete and ready for commissioning</li> <li>Support functional testing, start up, and performance testing of HVAC systems</li> <li>Identify, report, and assist in resolving commissioning issues and punch points</li> </ul> <p><strong>HVAC systems scope</strong></p> <ul> <li>Supervision of commissioning activities for: <ul> <li>Air handling units (AHUs)</li> <li>Chilled water and DX systems</li> <li>Packaged and split HVAC units</li> <li>Ventilation, exhaust, and pressurization systems</li> <li>Ducting, dampers, louvers, and insulation</li> <li>HVAC controls and basic instrumentation</li> </ul> </li> <li>Ensure systems are commissioned in line with design intent and operational requirements</li> </ul> <p><strong>Site supervision & coordination</strong></p> <ul> <li>Supervise technicians, subcontractors, and commissioning crews</li> <li>Coordinate daily activities with construction, electrical, and instrumentation teams</li> <li>Interface with commissioning engineers and vendors during testing activities</li> <li>Participate in system walkdowns, punch listing, and punch clearance</li> <li>Support handover activities and system acceptance</li> </ul> <p><strong>HSE & quality compliance</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE requirements</li> <li>Conduct toolbox talks and ensure safe work practices are followed</li> <li>Report unsafe conditions, incidents, and near misses</li> <li>Ensure quality documentation is completed accurately and on time</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Maintain daily commissioning activity records</li> <li>Support preparation and completion of test sheets and commissioning dossiers</li> <li>Provide progress updates to commissioning engineers and supervisors</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Diploma or bachelor’s degree in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 7–12 years of experience in HVAC installation, pre commissioning, and commissioning</li> <li>Previous experience on oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Site based commissioning experience within EPC project environments</li> <li>Middle East project experience is preferred</li> </ul> <p><strong>Technical skills</strong></p> <ul> <li>Strong hands on knowledge of HVAC systems and commissioning practices</li> <li>Ability to read and interpret drawings, layouts, datasheets, and procedures</li> <li>Familiarity with international standards such as ASHRAE, SMACNA, NFPA</li> <li>Practical troubleshooting skills during system start up and testing</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Require Mechanical Engineer and Gas and Pipe Fitting Technician for Oil and Gas Company in Oman. Gas Technician should know LPG Fitting and Maintenance. Interested candidates Please email your CV on EMAIL_ADDRESS</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Require Mechanical Engineer and Gas and Pipe Fitting Technician for Oil and Gas Company in Oman. Gas Technician should know LPG Fitting and Maintenance.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Sr. Specialist Business Applications Grade Stream People, Technology &amp; Culture Function IDS &amp; CI - Digital Delivery Location Oman Muscat Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Manager Digital Delivery Direct reports - Job purpose The Senior Solution Architect owns the architecture, design standards, delivery practices, and governance of the company s enterprise business applications. The role sets how solutions are designed, built, deployed, and integrated ensuring they are secure, scalable, well-governed, and reliably delivered into production. The Enterprise Document and Records Management System (EDRMS) is a core platform within the architect s portfolio. The role provides technical direction across the application landscape: it defines reference architectures and CI/CD and deployment standards, governs solution designs (internal and vendor), and ensures changes meet security, records, and data-governance requirements. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main Tasks and Responsibilities Solution Architecture &amp; Design Define and maintain reference architectures, solution designs, integration designs, and data-flow diagrams for the enterprise application portfolio, including EDRMS. Translate business requirements into secure, scalable, and maintainable technical solutions, selecting appropriate patterns and technologies. Provide hands-on design, prototyping, and proof-of-concept work to validate architecture decisions and de-risk delivery. Architecture Governance &amp; Standards Define, maintain, and enforce solution-design, coding, and integration standards and technical guardrails across applications. Operate design-authority / solution-review gates: review and approve internal and vendor technical designs against architecture, security, and data-governance principles. Maintain Architecture Decision Records (ADRs) and ensure changes follow change-management, access-control, audit, and IT-governance requirements; provide architecture input to audits and assurance reviews. Delivery Standards &amp; CI/CD Define the CI/CD strategy and standards (e.g. Azure DevOps, GitLab CI, GitHub Actions) covering source control, branching, automated build/test, code quality, and artifact management. Set expectations for automated testing and security scanning (SAST/DAST/dependency) within pipelines, and govern adherence across teams and vendors. Guide engineers and vendors in implementing pipelines to the agreed standard, and review delivery practices for quality and consistency. Deployment &amp; Release Strategy Own deployment architecture and environment strategy (development, test, staging, production), including environment promotion and configuration management. Define release governance deployment runbooks, rollback/back-out plans, and post-deployment verification and oversee controlled releases of significant changes. Coordinate change windows and cutovers with IT Operations, Infrastructure, Database, Cybersecurity, and vendor teams to protect availability and performance. EDRMS / ECM Platform Architecture Own the architecture and roadmap of the EDRMS platform (e.g. OpenText Documentum, D2, Content Server, or similar) as a core managed platform. Design document-management workflows, metadata models, taxonomy, classification, retention rules, access controls, and integration points, ensuring records compliance and data quality. Direct migration, indexing, metadata improvement, OCR, and search-optimisation activities, working with specialist engineers and vendors for deep configuration and build. Integration Architecture Design secure, resilient integrations between EDRMS / business applications and ERP (e.g. SAP), SharePoint/M365, databases, portals, and identity-management systems using APIs, web services, and connectors. Define standards for authentication, error handling, monitoring, and data quality across integrations. Technical Leadership, Support Oversight &amp; Vendor Management Act as technical authority and escalation point for complex incidents, performance problems, and integration issues, ensuring solutions are supportable and root causes are addressed without owning first-line incident resolution. Coordinate with vendors, review technical deliverables for quality and compliance, and follow up on support and enhancement activities. Provide technical guidance and knowledge transfer to internal teams and business users, and identify opportunities to automate manual processes and improve usability, efficiency, and reliability. Perform other related duties as assigned. Key interactions Internal: IDS &amp; CI function, IT Operations, Infrastructure, Database, and Cybersecurity functions, business application owners and users across all OQEP functions and streams. External: Software and platform vendors (EDRMS/ECM vendors, ERP vendors), system integrators, specialist technical consultants. Notable Working Conditions. Office environment, intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education Requirements Required: Bachelor's degree in Computer Science, Information Technology, Software Engineering, or related field. <em>Preferred: Postgraduate qualification or professional certifications such as TOGAF, Azure Solutions Architect, OpenText/Documentum certification, or equivalent; certifications in DevOps or CI/CD tooling (Azure DevOps, GitLab) are an advantage.</em> Language Excellent knowledge of written, read, and spoken English (required) Background and experience Competencies and skills 6+ years of relevant experience in solution architecture, enterprise applications, or software delivery within a medium to large organization. Demonstrated experience designing and governing enterprise application architectures, including integration and deployment architecture. Hands-on experience with EDRMS/ECM platforms (e.g. OpenText Documentum, D2, Content Server, or similar) is strongly preferred. Experience defining and governing CI/CD pipelines and DevOps practices (Azure DevOps, GitLab CI, GitHub Actions, or equivalent). Experience integrating business applications with ERP systems (e.g. SAP), SharePoint/M365, and identity management systems. Familiarity with architecture governance practices including Architecture Decision Records (ADRs) and design-authority processes. Experience working with vendors and managing technical delivery quality and compliance. Technical Competencies: Strong analytical and problem-solving skills. Excellent communication skills, able to translate technical concepts for business stakeholders. Ability to act as a technical authority and influence design decisions across teams and vendors. Attention to detail and a quality-driven mindset. Self-motivated with the ability to manage multiple initiatives concurrently. Collaborative approach to working with cross-functional and vendor teams. Cultural sensitivity in a multinational environment. Technical Competencies: Solution and enterprise architecture design (reference architectures, integration design, data-flow diagrams). Architecture governance and Architecture Decision Records (ADRs). CI/CD strategy and tooling (Azure DevOps, GitLab CI, GitHub Actions). Automated testing and security scanning (SAST/DAST/dependency scanning). Deployment architecture, environment strategy, and release governance. EDRMS/ECM platform architecture (OpenText Documentum, D2, Content Server, or similar). Document management workflows, metadata models, taxonomy, and records compliance. Integration architecture (APIs, web services, connectors) with ERP, SharePoint/M365, and identity management systems. IT governance, change management, and access control principles. Vendor management and technical delivery review.IT governance, change management, and access control principles. Vendor management and technical delivery review.</p><p></p></section>

<p>Job Purpose</p> <p>(The primary reasons for which the job exists in the company)</p> <p> To apply specialist I&amp;C expertise for the efficient working of the I&amp;C Department at Manah Power Plant and housing complex;</p> <p> To ensure Plant I&amp;C equipment is maintained as per procedures documents</p> <p> To ensure downtime of the plant is reduced by careful planning and the implementation of Maintenance Practices of all plant equipment and efficient resolution of equipment defects.</p> <p> To assist the I&amp;C Engineer in ensuring that all I&amp;C equipment is well maintained, and all notifications of planned and unplanned work are completed on time.</p> <p> </p> <p>Description Key Result Areas</p> <p>Description</p> <p> </p> <p>Safety at Work</p> <p> Ensures a safe working environment for himself, his colleagues while working on any equipment.</p> <p> Ensures that there is a Permit to Work (taken by the I&amp;C Engineer) for each job as necessitated by the Manah Power Plant HSE Procedures put in place.</p> <p> Ensures all necessary precautions are taken by himself and Contractors while undertaking any jobs in Manah Power Plant.</p> <p> Ensures that all necessary tools are available for the safe working on equipment and that are used during the performance of all jobs in the Plant.</p> <p> Points out any unsafe conditions to the I&amp;C Engineer/ Maintenance Manager.</p> <p> </p> <p>Maintenance Task Planning and Execution</p> <p> Completes all Work Orders generated in ORACLE as directed by the I&amp;C Engineer.</p> <p> Generates reports (mainly log sheets/check sheets) as necessary for the maintenance done for the I&amp;C Engineer review.</p> <p> Ensures that maintenance of all I&amp;C equipment is in accordance with OEM Manuals for the equipment.</p> <p> Reviews I&amp;C maintenance procedures and suggests improvements.</p> <p> Reviews I&amp;C Maintenance Procedures and suggests improvements with coordination with I&amp;C Engineer/ Maintenance Manager.</p> <p> Works to full potential and ensures that work is of very high quality.</p> <p> </p> <p>Equipment Failure Troubleshooting and Repair</p> <p> Supports reliable and accessible 24-hour call-out functionality.</p> <p> Attempts all possible means of reducing equipment downtime and ensuring high plant availability.</p> <p> Performs troubleshooting activities as necessary along with the I&amp;C Engineer and colleagues to determine failure conditions and rectifies defects found.</p> <p> Records and reports to the I&amp;C Engineer all rectification jobs undertaken.</p> <p> Works with Plant Operations Personnel for resolving problems encountered with mechanical equipment under the guidance of the I&amp;C Engineer.</p> <p> </p> <p>Reporting and Planning</p> <p> Discusses planned and unplanned jobs undertaken with the I&amp;C Engineer.</p> <p> Assists the I&amp;C Engineer/ Maintenance Manager in planning daily jobs.</p> <p> </p> <p>Tools</p> <p> Ensures necessary tooling is available at work site during performance of any job.</p> <p> Uses correct tools for each job.</p> <p> Reports loss of tools or damage to any tools to the I&amp;C Engineer.</p> <p> Informs the I&amp;C Engineer of any requirements for tools.</p> <p> Ensures tools are in good working order.</p> <p> </p> <p>Ownership</p> <p>Assumes ownership of plant I&amp;C equipment and strives to maintain them in the best possible condition.</p> <p> </p> <p> </p> <p> The Job Holder will be based at the Manah Power Plant or any other Plant within MPC s control.</p> <p> The Job Holder will work in a controlled hazardous environment.</p> <p> </p> <p>Work Levels and Conditions and Risks:</p> <p> Work Level 1: the tasks that he/she performs as part of their daily work activities do not represent a risk for their integrity;</p> <p> Work Level 2: the tasks that he/she performs as part of their daily work activities represent a risk for their physical integrity (e.g. working in zones with high temperatures or with permanent increased noise levels);</p> <p> Work Level 3: the tasks that he/she performs as part of their daily work activities represent a risk of medium kind and with temporary consequences like blows, falls, etc.;</p> <p> Work Level 4: the tasks that he/she performs as part of their daily work activities represent a risk of accidents of medium kind that can generate permanent consequences (burns, mutilations, irreversible wounds);</p> <p> Work Level 5: the tasks that he/she performs as part of their daily work activities represent risks and are controlled by means of procedures, supervision, safety devices and HSE Teams in such a way that its non-observance that could lead to a serious accident of even death.</p> <p> Work Level 6: the tasks that he/she performs as part of their daily work activities represent a high risk for their physical integrity. This job is classified according to International Safety Regulations as a high risk level job.</p> <p> </p> <p>Exposure to Risks:</p> <p> Traffic/automobile accidents, ergonomic problems and accidents;</p> <p> Risks inherent to the job of the I&amp;C Technician while performing inspections, site visits, operations and maintenance activities, etc.</p> <p> </p> <p> </p>

<p>URGENT HIRING FOR QA QC ENGINEER (Mechanical)</p><p>Industry: Oil &amp; Gas / Refinery / Pipeline</p><p>Location: GCC / Middle East</p><p>Position: QC Engineer Mechanical</p><p>Experience: Minimum 15 Years</p><p>We are looking for an experienced QC Engineer Mechanical with extensive experience in pipeline, piping, tanks, pressure equipment, valves, rotating equipment, and refinery construction projects .</p><p>Qualification &amp; Certifications</p><ul><li>HNC / HND / Bachelor's Degree or equivalent in Mechanical Engineering, Welding Engineering, Metallurgy , or relevant technical qualification</li><li>CSWIP 3.1 / AWS or equivalent certification</li><li>ASNT / EN 473 / PCN Level II certification in RT, PT, MT &amp; UT techniques</li><li>Strong knowledge of mechanical and metallurgical testing requirements</li></ul><p>Experience Required</p><ul><li>Minimum 15 years of relevant inspection/QC experience for HNC/HND candidates</li><li>Extensive experience in Oil &amp; Gas, Pipeline, Piping, Tanks, Pressure Equipment, Valves, Rotating Equipment, and Refinery Construction</li><li>Strong knowledge of welding, NDT, mechanical inspection, testing, and quality documentation</li><li>Experience working with approved ITPs, procedures, method statements, and project quality requirements</li></ul><p>Key Responsibilities</p><ul><li>Implement QA/QC activities , including inspection and surveillance of subcontractors and suppliers, in accordance with approved ITPs, procedures, method statements, and quality control documents.</li><li>Prepare, review, and sign off applicable inspection, testing, and quality surveillance records .</li><li>Conduct surveillance inspections to ensure compliance with approved processes and procedures.</li><li>Monitor construction activities and ensure required quality standards are maintained.</li><li>Raise RFIs (Request for Inspection) to the client for day-to-day construction activities.</li><li>Witness pigging, hydrostatic testing, pneumatic testing , and other applicable inspection and testing activities.</li><li>Conduct line walks and prepare, monitor, and close punch lists.</li><li>Witness and verify PQR/WQT activities in accordance with approved PWPS/WPS .</li><li>Verify that all materials are procured from approved suppliers and comply with project specifications.</li><li>Monitor and ensure timely closure of NCRs , including suitable correction and corrective actions.</li><li>Maintain records related to calibration, inspection, and testing equipment .</li><li>Ensure the latest approved versions of applicable drawings, specifications, procedures, and quality documents are available at site.</li><li>Witness qualification procedures and tests and certify the results as applicable.</li><li>Issue Inspection Release Notes (IRN) and sign test packs / QC dossiers as required.</li><li>Coordinate with clients, third-party inspectors, subcontractors, and construction teams on quality-related matters.</li><li>Provide regular feedback to the Site Quality Engineer / Quality Manager regarding day-to-day quality issues and concerns.</li></ul><p>Required Skills</p><ul><li>Strong knowledge of QA/QC procedures and inspection practices</li><li>Good understanding of NDT techniques and welding inspection</li><li>Knowledge of quality audits and quality management systems</li><li>Strong knowledge of MS Office</li><li>Excellent written and verbal communication skills in English</li><li>Strong reporting, documentation, coordination, and problem-solving abilities</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>HNC / HND / Bachelor's Degree or equivalent in Mechanical Engineering, Welding Engineering, Metallurgy , or relevant technical qualification</li><li>CSWIP 3.1 / AWS or equivalent certification</li><li>ASNT / EN 473 / PCN Level II certification in RT, PT, MT &amp; UT techniques</li><li>Strong knowledge of mechanical and metallurgical testing requirements</li><li>Minimum 15 years of relevant inspection/QC experience for HNC/HND candidates</li><li>Extensive experience in Oil &amp; Gas, Pipeline, Piping, Tanks, Pressure Equipment, Valves, Rotating Equipment, and Refinery Construction</li><li>Strong knowledge of welding, NDT, mechanical inspection, testing, and quality documentation</li><li>Experience working with approved ITPs, procedures, method statements, and project quality requirements</li><li>Strong knowledge of QA/QC procedures and inspection practices</li><li>Good understanding of NDT techniques and welding inspection</li><li>Knowledge of quality audits and quality management systems</li><li>Strong knowledge of MS Office</li><li>Excellent written and verbal communication skills in English</li><li>Strong reporting, documentation, coordination, and problem-solving abilities</li></ul>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The pre-commissioning & commissioning field instrument supervisor is responsible for supervising and executing all field instrumentation activities during the pre-commissioning and commissioning phases of a major process facility. The role ensures that instrumentation systems are installed, tested, calibrated, loop-checked, and commissioned safely, efficiently, and in accordance with project specifications and international standards.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Supervise field instrumentation activities, including installation checks, calibration, testing, and reinstatement</li> <li>Review and execute pre-commissioning procedures, check sheets, and test records</li> <li>Coordinate loop checking, functional testing, and punch listing/clearance</li> <li>Ensure correct installation and readiness of instruments, control valves, analyzers, and associated systems</li> <li>Verify compliance with project specifications, drawings, and approved vendor documentation</li> </ul> <p><strong>Commissioning phase</strong></p> <ul> <li>Support cold and hot commissioning activities for instrumentation systems</li> <li>Coordinate with commissioning engineers, operations, electrical, and DCS teams</li> <li>Troubleshoot instrumentation issues during system startup and stabilize operations</li> <li>Support logic checks, cause & effect testing, and system handover to operations</li> <li>Ensure timely closure of punch items related to instrumentation</li> </ul> <p><strong>HSE & quality</strong></p> <ul> <li>Enforce strict compliance with HSE policies, procedures, and permit to work systems</li> <li>Conduct toolbox talks and ensure safe execution of site activities</li> <li>Ensure all commissioning documentation is completed accurately and submitted on time</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise and guide technicians and subcontractors in the field</li> <li>Report daily progress, constraints, and technical issues to commissioning management</li> <li>Interface with construction, QA/QC, and client representatives as required</li> </ul> <h4>Qualifications & experience (must have)</h4> <ul> <li>Diploma or bachelor’s degree in instrumentation, control engineering, or equivalent</li> <li>Minimum 8–12 years of experience in field instrumentation, with strong exposure to pre-commissioning and commissioning</li> <li>Prior experience on large oil & gas, LNG, petrochemical, or process plant projects</li> <li>Hands-on experience with: <ul> <li>Field instruments (pressure, temperature, flow, level)</li> <li>Control valves and actuators</li> <li>Analyzers and packaged units</li> <li>Loop checking and functional testing</li> </ul> </li> <li>Strong understanding of commissioning procedures, system turnover, and punch management</li> </ul> <h4>Certifications & technical skills</h4> <ul> <li>Valid HSE certification (e.g., IOSH, NEBOSH, or equivalent)</li> <li>Familiar with international standards (IEC, ISA, API)</li> <li>Ability to read and interpret P&IDs, loop diagrams, hookups, and wiring diagrams</li> <li>Experience working with DCS/PLC systems in a commissioning environment</li> </ul> <h4>Soft skills & attributes</h4> <ul> <li>Strong leadership and field supervision skills</li> <li>Excellent coordination and communication abilities</li> <li>Problem-solving mindset with strong troubleshooting capability</li> <li>Able to work under pressure in fast paced commissioning environments</li> <li>Willingness to work extended hours and rotational site schedules</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p>PRINCIPAL ACCOUNTABILITIES</p><p>1. Carry out interpretation of 2D and 3D seismic data from the historical seismic databank and from new data received from seismic surveys. Identifies subsurface structure/trapping mechanism and reservoir distribution utilizing geophysical software packages such as Petrel, Geo-Graphix, DSD etc.</p><p>2. Generating plausible geophysical and geological concepts for leads and prospects in all possible plays, with appropriate risks, volume and commercial analysis and in support of a growing inventory of exploration portfolio.</p><p>3. Establish and maintain up-to-date Exploration Prospect Portfolio for all prospects for all levels, shallow to deep plays.</p><p>4. Identify new oil and gas prospects based on comprehensive technical work mainly Geophysical and Geological, from a regional prospective to block and field/prospect level.</p><p>5. Perform detail evaluation of identified prospect to progress to well proposal, presenting to the Management and shareholders to seek approval to drill Exploration wells in which clear conclusions and recommendations are required to the management to make decisions.</p><p>7. Work closely with Exploration geologist and reservoir engineer on analysis work of new found traps to ascertain the most likely locations of reservoir tops and subsequent locations of potential wells.</p><p>8. Identify optimal drilling locations using knowledge of 3D seismic interpretation and knowledge of regional and prospect specific petroleum systems.</p><p>9. Seamless coordination of all exploration-related operations between relevant internal and external parties.</p><p>10. Involvement on Tender documentation preparation and evaluation of bids for any study pertaining seismic; such as seismic data acquisition, survey plan, Processing, Reservoir Characterization, VSP, prospect identification etc.</p><p>11. Follow up and Supervise specialist or outsourced studies of seismic evaluation.</p><p>12. Stays up to date with current developments in seismic and geophysical mapping techniques and software. The role will also involve participating in the assessment of new technology, methodologies and workflows</p><p>13. Provide mentorship, guidance and control as required to junior Daleel geoscience staff with respect to geophysical methods and evaluation procedures.</p><p>14. Follows and promotes all QHSSE policies of the Company at all times.</p><p>KEY CHALLENGES:</p><p>Ability to work in both; Exploration and Development environments</p><p>Supporting day-to-day operations on well delivering for Exploration/Appraisal wells</p><p>Works closely with other team members as and when required.</p><p>To complete the company KPI by drilling required number of Exploration wells per year.</p><p>Ability to interact with internal and external clients</p><p><strong>Desired Candidate Profile</strong></p>JOB KNOWLEDGE, SKILLS AND EXPERIENCE<br>Minimum Academic Qualifications: Bachelor's degree in Geophysics or a related discipline<br>Minimum Work experience: At least 12 years experience in Geophysics or Seismic Interpretation in a recognized oil company and integration of seismic, well and other data.<br>Knowledge of Oman plays and Petroleum systems.<br>Proven Exploration record in finding new oil and gas resources.<br>Experience upstream E&amp;P professional with familiarity in petroleum systems analysis, well data analysis, geological interpretation and prospect evaluation.<br>Maturation and development of new prospects.<br>Experience in workstation-based seismic interpretation from regional to prospect level.<br>Awareness of seismic acquisition and processing<br>An understanding of principles of rock physics and quantitative seismic interpretation would be desirable.<br>Must be a technically established engineer in the Geophysics and well skilled in mentoring and motivating new Geophysicist.

<p>The Planning Engineer is a key member of the supervision services team. He supports the Senior Planning Engineer and Associate Project Managers with planning activities pertaining to schedule and cost control throughout the project lifecycle. The jobholder reviews on contractors work programs and continuously monitors contractors activities against approved plans. The jobholder shall stay abreast of the latest trends and developments in the construction management and planning space, and implement best practices, where applicable.</p><p>Responsibilities:</p><ul><li>Review and check the contractor s work program during the pre-construction phase, ensuring compliance with project requirements</li><li>Support the Senior Planning Engineer in the review of contractors submittals, including staffing proposals, organization charts, shop drawings, method statements, project procedures, traffic management plans, etc. during the pre-construction phase</li><li>Provide input to the Associate Project Manager on the development of project risk management plans, including the identification of potential risks and corresponding contingency plans</li><li>Assist in monitoring supervision project schedules and investigating reasons for delays with contractors and recommend corrective measures</li><li>Assist in monitoring contractors daily activities and resource allocation against project plan</li><li>Support Associate Project Managers with the review of contractors unit rates for new work items not covered in the original Bills of Quantities</li><li>Assist the Senior Planning Engineer in monitoring project progress</li><li>Track and check the versions of drawings and specifications and ensure that all relevant parties are using the latest revised construction drawings</li><li>Support the Associate Project Manager with reviewing and commenting on the contractors testing and commissioning plan, as needed</li><li>Support the Associate Project Manager with the preparation and issuance of Take-Over Certificates, Defect Liability Certificates, Final Accounts and Statements of Completion, as needed</li><li>Assist the Senior Planning Engineer in the development of periodic project progress reports</li><li>Implement corporate policies and procedures</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Qualifications :B.Sc. in Engineering Experience :8- 15 years. The experience shall include successfully completing a previous position as Planning Engineer in similar projects (Supervision).</p>

<p>Require Mechanical Maintenance Engineer for Cement Plant at Oman. Candidates must require experience in Cement Company as a Maintenance Engineer.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must require experience in Cement Company as a Maintenance Engineer.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Technician Instrument Grade Stream OQEP Function Operated Assets operations - B60 Field Operation Maintenance Location Oman B60 Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to TL B60 Maintenance Direct reports 0 Job purpose </p><p>Execute Instrument Maintenance Works for B-60, under delegated authority and direction from TL Maintenance B-60 as Technical Service provider of maintenance and execution of minor projects, modifications in accordance with the technical standards to maintain the assets through: (1) Leading the design Maintenance instrument services on planned / un-planned maintenance works utilizing best practice. (2) Coordination and supervision of assets, products and maintenance work in the designated area, (3) Implement plans and coordinate instrument maintenance works; in order to ensure plant equipment availability, reliability &amp; optimization of cost / resources while facilitating smooth operations of the plant to meet operational targets.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Main tasks and responsibilities</p><ul><li>Accountable for availability of Instrumentations, Analyzers and Controls systems, UPS/BC and communication system of the area</li><li>Ensure application of best work practices in execution of Instrumentations maintenance jobs.</li><li>Responsible for Instrumentations side of project implementation in SF B-60 facilities.</li><li>Implements the Preventive Maintenance (PM) plan within his section and execution along with work backlogs</li><li>Prepares procurement plan for his section.</li><li>Responsible for preparing the LLF of instruments and its implementations</li><li>Participate in Management of Change (MOC) committee review meetings.</li><li>Ensure Instrument equipment maintenance history &amp; reports are updated in SAP (CMMS)</li><li>Identify the critical issues, repetitive failure of Instrument equipment, done and the RCA Recommendations implemented for the area</li><li>Monitors staff attendance, attitude and implements discipline within the section.</li><li>Prepare annual leave plans</li><li>Directs, supervises and controls all work for instruments maintenance and calibration.</li><li>Receives and analyses periodic reports on instruments maintenance and scheduled turnarounds and determines the best course of action for increasing the Section s efficiency.</li><li>Provides full technical &amp; manpower support during plants shutdown.</li><li>Determines long term instrument maintenance policy and oversees detailed planning of maintenance activities and programs.</li><li>Reviews policies of warehouse materials/spare parts and determines strategy of their handling and procurement and ensures availability.</li><li>Coordinates efforts within the Section to develop guidelines, specifications, best practices and procedures for maintenance of pressure, level, flow, temperature, vibration and pH instruments.</li><li>Maintains technical expertise in functional areas of process instrumentation.</li></ul><p>Key Interactions</p><ul><li>Internal: Field Operators, Shift Team Leader, Panel Operators, Maintenance Coordinator, Process Trainer, Technical Services Department, Sr. / Engineer Operations.</li><li>External: Ministries, Civil Defense, ROP and Neighboring Companies</li></ul><p>Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Qualifications Diploma i in Instrumentation Engineering or similar</li><li>Excellent knowledge of written, read, and spoken English (required), Arabic - Native (desirable)</li><li>2+ years of relevant experience</li><li>Relevant experience in similar role (Oil &amp; Gas)</li><li>Knowledge of maintenance processes for Gas Network operations:</li><li>Knowledge of instrument control loops.</li><li>Familiar with Systems, Applications and Products in data processing (SAP).</li><li>Experience on Local control station/ Plant interface bus and DCS.</li><li>Good knowledge of modern maintenance technologies &amp; maintenance Planning and execution of Instrumentation Equipment s, Analysers, Calibrations, control systems, ESDs</li><li>Experience and knowledge in project planning, cost control, contract development, installation, trouble shooting, and start-up.</li><li>Sound judgment in technical matters with good skills in engineering field materials specifications and international standards.</li><li>Good experience in handling Maintenance Contracts and shutdown related jobs.</li><li>Knowledge of:</li><li>Computerized Maintenance Management Systems (CMMS)</li><li>Expertise in SAP- PM</li><li>Process Equipment Life-Cycle Management</li><li>Good knowledge in Quality Assurance, Quality Control and HSE plans.</li><li>Familiar with techniques for ensuring data integrity with various integration of information/ reports</li><li>Knowledgeable in HSE plans related to maintenance activities.</li><li>Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals.</li><li>Soft:</li><li>Ve rbal and writing reporting skills-effective Communication</li><li>Demonstrated leadership impact to deliver improved and sustained performance</li><li>Able to build relationships within department staff and contractors with a focus on collaboration.</li><li>Ability to manage multiple priorities in a diversified and critical environment.</li><li>Technical:</li><li>Through use of facts</li><li>Troubleshooting and result oriented</li><li>Root Cause Analysis (RCA)</li><li>Reading and interpreting engineering drawings</li><li>Project Management</li><li>Developing and Modifying Technical Procedures</li><li>Ability to align the requirements of operations and maintenance</li><li>Familiar with techniques for ensuring data integrity with various integration of information/ reports</li><li>Knowledge in estimating, budgeting and cost control</li></ul><p></p></section>

<p>Project Engineer Infrastructure Condition Survey Civil/Structural Engineer with 8 12 years experience, including marine/port/bridge infrastructure. Expertise in condition assessment, structural inspection, Total Station/GNSS.</p><p><strong>Desired Candidate Profile</strong></p><p>Civil/Structural Engineer with 8 12 years experience, including marine/port/bridge infrastructure. Expertise in condition assessment, structural inspection, Total Station/GNSS.</p>

<p><br></p><p><strong>Scope of Position</strong><br>The Duty Technician is responsible for the daily operation of the engineering department and for ensuring that the department is operated in the safest and most efficient manner. The Duty Technician will assume the responsibilities of the Duty Engineer during his absence.</p><p><strong>Departmental:</strong></p><ul><li>Maintain proper and safe condition of all Plant, Plant Rooms, Equipment and Work areas.</li><li>Comply with all Fire, Life, Health, and Safety Standards.</li><li>To be conversant with the Hotel Emergency Procedures.</li><li>Perform Emergency Response Team duties as required.</li><li>Personal presentation will be clean, neat, and tidy always.</li><li>Be courteous, professional, and service orientated when dealing with Guest, Patrons, and Fellow Staff Members.</li><li>Assist Guests, Patrons, and Fellow Staff Members as and when appropriate.</li><li>Undertake specific duties and projects when assigned.</li><li>Activity support Training Programs.</li><li>To carry out work in accordance with The Hotel Planned Maintenance Program.</li><li>Familiarize himself with the technical details of all Plant and Services relating to the Hotel.</li><li>Work shifts as designated.</li><li>Maintain, repair, check and record equipment relating to:<ul><li>Guest Facilities</li><li>Plant Rooms</li><li>Air Conditioning Equipment</li><li>Refrigeration Equipment</li><li>Fire, Life, Health, and Safety</li><li>Electrical and Mechanical Services</li><li>Plumbing and Heating</li><li>Entertainment Equipment</li><li>Kitchens</li><li>Lighting</li><li>Furniture, Fittings and General Equipment</li></ul></li><li>Actively support and assist the Duty Engineer</li></ul><p><br></p>

<p>We have openings for our prestigious client in Oman; they have openings for "MEP Engineer / Plumbing Supervisor / Electrical Supervisor / HVAC Supervisor Experience in Construction Projects - Oman Location!!!</p><p><strong>Desired Candidate Profile</strong></p><p>1) CANDIDATES SHOULD HAVE EXP IN COMMERICAL BUILDINGS / HOTELS / INDUSTRIAL PROJECTS ETC.</p><p>2) GCC EXP IS PREFERRED</p><p>Below are the open positions:</p><ul><li>1) MEP Engineer.</li><ul><li>a) Degree in Electrical Engineering.</li><li>b) Minimum 5+ years of experience as MEP Engineer in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>2) Plumbing Supervisor.</li><ul><li>a) Diploma / ITI in Mechanical.</li><li>b) Minimum 8+ years of experience as Plumbing Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>3) HVAC Supervisor.</li><ul><li>a) Diploma / ITI in Mechanical.</li><li>b) Minimum 8+ years of experience as HVAC Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul><li>4) Electrical Supervisor.</li><ul><li>a) Diploma / ITI in Electrical.</li><li>b) Minimum 8+ years of experience as Electrical Supervisor in Construction projects (Commercial Buildings / Hotels / Industrial Projects, Etc.)</li></ul></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wood is recruiting for an Omani Telecom Engineer to join its Projects team focusing on delivering across FEED and Detail design scopes of work. In this role, you will be responsible to create Engineering deliverables and execute detail design under the supervision of a senior engineer for a specific project and ensure timely completion to the required quality standards. Assist senior engineer in developing and updating Office Qualty standards and add value to the work optimization process. Position is based in Oman for a long-term assignment. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws. What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. Experience: Degree in Relevant Engineering or equivalent. Good communicator and strong team player. Omani Telecom Engineer will be responsible for : Prepare Engineering deliverables. Conduct relevant Workshops and Reviews Contribute to Basis for Design Concept Selection, Project Specifications and detail design execution. Perform Engineering studies, review and maintain Quality and FEED Office standards affecting Telecoms in FEED Office. Designing the future. Transforming the world Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas. What we can offer Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details. Workmen s Compensation: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability. Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being. Typical responsibilities Responsible for initiating the First- Cut design of Telecom system under the accountability of Sr. Engineer Responsible for inititating meeting and technical solution discussions between several stake holders of the project. Responsible for obtaining As-Built information and aquiring solutions in the absence of As-built information Responsible for managing Technical Clarifications- on scope and needs. Responsible for coordination with the asset teams for the information Manage all technical changes internally and obtaining approval from Discipline Leads. Responsible for Scope change confirmation (TIN) Accountable for the Decision Making on changes Mange all Assurance Reviews and action close outs Accountable for Raising + Uploading +Liaising + Technical Variances Responsible for approving TPS Final reports Responsible for reviewing and approval of design and vendor documents in SPO. Responsible for obtaining DEM compliances. Maintaining a good relationship with the client is critical to the success of the (design) project and often requires visit to the site and/or client office. Be a team player where recognition of team performance as a whole is a greater priority than projecting individual contribution. Be able to work in a team environment and handle multiple project responsibilities. Application and maintenance of engineering processes, systems and tools (software). Follow/ensure Quality Management System Requirements are met in line with ISO 9PHONE_NUMBER and API Q2 2nd edition requirement. Shall be abreast with new Telecom technology and innovations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum 8 years experience in upstream oil &amp; gas Engineering. Minimum 3 years in FEED/ENGINEERING and Minimum 8 years in oil &amp; gas Experience.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>As Shift Technician (Buggy &amp; Generator), I will fully comprehend the vision of Six Senses to help people reconnect with themselves, others and the world around them and our values of local sensitivity and global sensibility, crafted experiences, emotional hospitality, responsible and caring, fun and quirky and pioneering wellness.</p><br><p>Sustainability, Wellness and Out of the Ordinary experiences are at the core of everything we do at Six Senses. I will safeguard these pillars and ensure full knowledge and active participation of all our brand initiatives.</p><br><p><strong>Duties and Responsibilities&nbsp;</strong><br>As Shift Technician, I will assume full responsibility for the efficient operation in the following:&nbsp;<br>• Evaluates mechanical, electromechanical systems and products by designing and conducting research programs; applying principles of mechanics, thermodynamics, hydraulics, heat transfer and materials.&nbsp;<br>• Develops mechanical and electromechanical products by studying customer requirements.&nbsp;<br>• Assures system and product quality by designing testing methods; tests finished product and system capabilities; confirms fabrication, assembly, and installation processes.&nbsp;<br>• Controls maintenance tools, stores and equipment and ensure there is continuous cover of the machinery and equipment in case of breakdowns.&nbsp;<br>• Ensure the efficient and economic operation of the Generators and Buggy<br>• Giving solutions to any engineer for any Engineering related issue<br>• Assist the engineering Manager with reporting and technical issues<br>• Ensure that the budget is adhered to and costs are strictly controlled.&nbsp;<br>• Supporting the sustainability department on how we are to be self-sustainable and Cost saving<br>• Coordinate with engineering coordinator related with material order<br>• Control and monitor consumption of materials and asset.<br>• Keeps record of assignments and produce detailed work reports.&nbsp;<br>• Maintains working area and makes sure that all working areas remain clean at all times.&nbsp;<br>• Uses personal safety wares for personal safety while on duty.&nbsp;<br>• Upkeep Six Senses guidelines and standards of service and operation. My performance benchmarks are maintained and exceeded.&nbsp;<br>• Strictly adhere to LQA standards and guest comments.&nbsp;</p><br><p><strong>Qualifications</strong><br>To execute the position of Shift Technician&nbsp;, I must have the required qualifications, technical skills and experience in a similar role in luxury hotels with proven results and includes the following:</p><br><p>• High school diploma or equivalent and/or valid license to practice mechanical engineering and at least 1 year experience in a similar setting.&nbsp;<br>• Technical skills include the ability to analyze and design projects of limited complexity and scope. Knowledge in blueprint reading and installing of machines, wiring and equipment and basic mechanical skills are mandatory.<br>• I have an excellent command of written and spoken English, and I am able to live in a remote location for extended periods of time and travel on single status.</p><br><p><i>The above is intended to provide an overview of the role and responsibilities for a Shift Technician at Six Senses Zighy Bay. It is not and does not infer that the above is an inclusive and/or exhaustive list of the duties and responsibilities inherent to the position.</i></p><br><p><i>Six Senses Zighy Bay is an equal opportunity employer. This policy applies to all terms and conditions of employment.</i></p><br><br>At IHG, we’ve made a promise. As one of the world’s leading hotel groups, we’re here to deliver True Hospitality for Good. Making our guests and colleagues feel welcome, cared for, recognised and respected – wherever they are in the world. Want to be part of the journey? </div>

<p>Q C Civil Inspectors ( Oil &amp; Gas ) Graduate Engineer ( OMAN Engineering Council Certified. If not this can done after selection )</p><p>6-8 years of experience in Oil &amp; Gas, Refinery</p><p>Supervising construction activities related to mechanical, piping, painting, insulation, refractory</p><p>Reinforcement &amp; Formwork Inspection</p><p>Earthworks &amp; Compaction Verification</p><p>Foundations &amp; Underground Utilities Inspection</p><p>Alert Seniors whenever any aspect of the work does not comply with the contract requirements or is being performed outside of the contract scope either by sib contractor or any other party involved</p><p>Quality Documentation &amp; Reporting</p><p>Client &amp; Consultant Inspection Coordination</p><p><strong>Desired Candidate Profile</strong></p><p>Graduate Engineer ( OMAN Engineering Council Certified. If not this can done after selection )</p><p>6-8 years of experience in Oil &amp; Gas, Refinery</p>