Cost Estimating Engineer Jobs in Oman

<p>Job Purpose: Control and advise all the technical and operational aspects of the vessel under OSMC s management. Provide necessary marine technical expertise in shipping matters to OSMC. Establish and maintain operational standards to enhance Safety, efficiency, tradability, and reliability of the vessel. Responsible for controlling and managing actual cost and budget for the vessels. Present requirement is for Very Large Crude Carriers, LR/MR Product and Chemical tankers, Very Large Bulk Carriers and Supramax Bulk Carriers.</p><p>Key Accountabilities</p><p>Supervision of Subordinates Support and supervise the vessels command in all aspects.</p><p>Instruction Manual Establish and maintain operations policies, procedures, and instruction manuals to ensure safe, reliable, and efficient operation including loading, discharging, gas free and docking etc. and supervise the provision of other services to the vessel.</p><p>Certificate &amp; Legal Document Validation Supervise expire date of all statutory and class certificates and documents to ensure they are as per legislative requirements and in accordance with OSMC s policies. Insurance, finance, crewing quality certificates by relevant departments Familiar with relating contract, agreement including technical management of operations activities, IMO &amp; Class rules and regulations.</p><p>Port Authority Coordination Liaises, as appropriate, with terminal operators at loading/unloading ports, customers, joint ship owners, service engineer and shipping agents store suppliers etc. Prepares repair and docking specification beforehand. Draw up estimate to obtain approval by the Fleet Manager as per requirement. Attend DD and co-ordinate with shipyard for safe and successful DD completion. Supervise, upkeep and maintenance as per scheduled in accordance with approved plan, making the necessary occasional visits.</p><p>System Audit Supervise ship maneuvering and mooring, etc. and ensure all established policies and processes are correctly implemented. Discusses and resolves in conjunction with Marine Manager and Fleet Manager, failure of machineries, unsatisfactory performance, etc. Administer in house ISM system, conduct audit of the vessel and in-house systems and conduct evaluation of the crew etc. in conjunction with ISM system.</p><p>Budgets and Plans Contribute to the preparation of the technical department budget and monitor financial performance versus the budget so that the business is aware of anticipated costs/revenues and areas of unsatisfactory performance are identified, rectified promptly and potential performance improvement opportunities are capitalized upon. Control and manage actual and budget for maintenance, Ship Store, LO, Medicines etc..</p><p>Policies, Systems, Processes &amp; Procedures Recommend improvements to departmental procedure and direct the implementation of instructions and controls covering a specific area of technical activity so that all relevant procedural/legislative requirements are fulfilled while delivering a quality, cost-effective service. Maintain a particular and clear PMS system ensuring the vessel is always meeting OSMC s standards. Ensure accurate and swift sign off and approval of all stores and requisitions, ensuring that no outstanding payments are impacting OSMC s relationship to its suppliers.</p><p>Continuous Improvement Stimulate subordinates and contribute to the identification of opportunities for continuous improvement of technical systems, processes and practices considering international best practice , improvement of business processes, cost reduction and productivity improvement.</p><p>MIS and Reports Prepare departmental MIS statements and reports timely and accurately to meet OSC and department requirements, policies and standards.</p><p>Safety, Quality &amp; Environment Ensure compliance to all relevant safety, quality and environmental management procedures and controls to guarantee employee safety, legislative compliance, delivery of high-quality product/service and a responsible environmental attitude.</p><p>Operating Activities Ensure timely condition monitoring of machinery by maintenance system to facilitate smooth operation. Ensure maintenance of the validity of all certificates and documents as per OSC policies and guidelines. Follow and co-ordinate with vessel to maintain all defect reports. Follow and co-ordinate with vessel to maintain inventory of all critical spares.</p><p>Document control and filing Ensure SMS document control and filing for duty ship.</p><p>Maintenance Visits Manage the upkeep and maintenance on board by making occasional/periodic visit, as per the set schedule</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum Qualification: Bachelor of Engineering in Marine/Mechanical/Electrical or Naval Arch.</li><li>Chief Engineer Certificate of Competency (Motor or Steam, as required).</li><li>Minimum Experience: Minimum of 10 years of relevant experience, including at least 1 year as a Technical Superintendent or 3 years as a Chief Engineer onboard a Foreign-Going (F.G.) vessel.</li></ul><p>Job Specific Skills:</p><ul><li>Detail oriented</li><li>Driven by getting things done correct.</li><li>Structured Communication</li><li>Organized in work.</li><li>Good Technical Knowledge</li></ul><p>Competencies:</p><ul><li>Marine Engineering Management</li><li>Planned &amp; Unplanned Maintenance</li><li>Vessel Technical Performance &amp; Monitoring</li><li>Spares /Stores Supply Chain Management</li><li>Dry Docking &amp; Repairs</li><li>Sale and Purchase Management</li><li>Technical Investigation &amp; Risk Analysis.</li></ul>

<p>Provide Operational Support at OQEP, Operated Assets Operations Support, under TL Operation Support scope s by delivering of a best practice operational strategies and results; in order to ensure safe and efficient operations at the site.</p><p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><h2>Main tasks and responsibilities</h2><h3>Common for All Levels</h3><p>Provide operational and technical engineering support across upstream surface facilities and associated systems, including on plot and off plot installations, during execution, commissioning, start up, and steady state operations.</p><p>Support troubleshooting, technical assessments, and operational problem solving to ensure safe and efficient plant and field operations.</p><p>Deliver assigned engineering and operational support tasks, including technical backup for hardware, process systems, utilities, and associated applications.</p><p>Support pre commissioning, commissioning, start up, and readiness activities for projects, brownfield modifications, and operational improvements.</p><p>Interface with Operations, Maintenance, Projects, HSE, Supply Chain and other Functions to support technical resolution of operational and execution issues.</p><p>Support procurement and supply activities from a technical standpoint, including resolving operational and technical clarification matters.</p><p>Monitor and support readiness to operate activities to ensure assets meet safety, operability, and reliability requirements.</p><p>Participate in operational reviews, audits, studies, and assurance activities (e.g. ORA, PSSR), as required by project or asset lifecycle stage.</p><p>Ensure compliance with company engineering standards, operating philosophies, applicable regulations, and best industry practices.</p><h3>Engineer Operation Support</h3><p>Execute assigned engineering and operational support tasks under supervision.</p><p>Apply approved engineering procedures, standards, and work practices during execution and operations.</p><p>Support commissioning, start up, and operational activities as part of a multi disciplinary team.</p><p>Contribute to studies, reviews, and troubleshooting activities under guidance.</p><h3>Senior Engineer Operation Support</h3><p>Independently handle multiple operational support and execution scopes across on plot and off plot facilities.</p><p>Provide technical guidance and mentoring to junior engineers and trainees.</p><p>Apply hands on experience in upstream surface facilities, including major process units and associated rotating and static equipment.</p><p>Act as discipline or process lead in technical reviews and studies (e.g. design reviews, HAZOP, RCAs, MOCs).</p><p>Lead technical input for brownfield modifications, operational improvements, and energy efficiency initiatives.</p><p>Manage technical aspects of procurement, bid evaluation, and vendor document reviews.</p><h3>Lead Engineer Operation Support</h3><p>Act as technical authority for operational support across on plot and off plot upstream facilities.</p><p>Provide strategic technical direction and ensure consistent application of engineering principles across assets and teams.</p><p>Lead and coordinate engineering and operational support teams during execution, commissioning, and readiness phases.</p><p>Serve as focal point for ORA, PSSR, commissioning governance, and operational readiness assurance.</p><p>Own technical risk evaluation, readiness endorsement, and final technical recommendations to management and stakeholders.</p><p>Support capability development, succession planning, and continuous improvement within Operation Support.</p><h2>Key interactions</h2><p>Internal: Operated Assets functions.</p><p>External: Contractors, Vendors &amp; Suppliers</p><h2>Notable Working Conditions.</h2><p>Field Operations and office environment, Moderate to intensive computer screen use.</p><p><strong>Desired Candidate Profile</strong></p><h2>Education requirements</h2><p>Bachelors in Process, Chemical, or equivalent</p><h2>Language requirements</h2><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><h2>Background and experience</h2><h3>Competencies and skills</h3><h4>Background</h4><p>5+ years of relevant experience</p><p>Adaptable and motivated engineering professional who thrives in complex operational and project environments.</p><p>Experience in engineering design support and troubleshooting within upstream surface facilities.</p><p>Exposure to project lifecycle activities including planning, installation, commissioning, start up, and operational support.</p><p>Demonstrates sound technical judgment with knowledge of engineering standards, material specifications, and applicable international codes.</p><p>Working knowledge of Quality Assurance, Quality Control, and HSE requirements.</p><p>Ability to interpret Process diagrams (PFDs, P&amp;IDs), engineering drawings, and OEM manuals.</p><h4>Soft Skills</h4><p>Excellent interpersonal skills with strong multi cultural awareness and sensitivity.</p><p>Ability to build effective working relationships with internal teams and contractors, with a strong focus on collaboration.</p><p>Ability to manage multiple priorities in a dynamic, time critical operational environment.</p><p>Analytical and fact based approach to problem solving and decision making.</p><p>Strong troubleshooting mindset and result oriented attitude.</p><h4>Technical Skills</h4><p>Computer literate with working knowledge of standard office and engineering applications (e.g. MS Office).</p><p>Sound technical judgment with practical understanding of upstream Oil &amp; Gas engineering disciplines.</p><p>Knowledge of resource coordination, interface management, and basic contract administration.</p><p>Experience in Root Cause Analysis (RCA) and structured problem solving techniques.</p><p>Ability to read and interpret engineering drawings, specifications, and vendor documentation.</p><p>Basic understanding of project execution and project management principles.</p><p>Ability to support the development, review, and modification of technical and operational procedures.</p><p>Capability to provide technical support, troubleshooting, backup, and operational assistance as required.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Role &amp; responsibilities Preparation of MEP Drawings Create detailed Mechanical, Electrical, and Plumbing drawings using CAD/BIM software (e.g., AutoCAD, Revit). Develop shop drawings, installation drawings, and as-built drawings. Coordination of MEP Services Coordinate MEP layouts with architectural and structural drawings. Identify and resolve clashes between different building services. Review of Design Documents Interpret engineering specifications, design calculations, and project requirements. Ensure drawings comply with project standards and client requirements. Revision and Documentation Update drawings based on engineer comments and site changes. Maintain drawing revisions and document control procedures. Preparation of Shop Drawings Produce detailed fabrication and installation drawings for HVAC, electrical, plumbing, and firefighting systems. Include dimensions, elevations, sections, and installation details. Quantity Take-Off Assist in preparing material quantity take-offs from drawings. Support estimation and procurement teams with accurate drawing information. BIM Modeling (if applicable) Create and maintain 3D MEP models using BIM software. Participate in clash detection and coordination meetings. Compliance with Standards Ensure drawings comply with local building codes, industry standards and company drafting procedures. Follow applicable safety and quality requirements. Site Support Provide revised drawings based on site conditions. Assist engineers and site teams by clarifying drawing details. Record Keeping Organize drawing files and maintain project documentation. Ensure all issued drawings are properly archived and traceable.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Required Skills Proficiency in AutoCAD and Revit MEP. Knowledge of HVAC, electrical, plumbing, and fire protection systems. Understanding of engineering drawings, symbols, and standards. Familiarity with BIM coordination and clash detection. Strong attention to detail and accuracy. Good communication and teamwork skills. Ability to manage multiple projects and meet deadlines. Educational Qualifications Diploma or Bachelor's degree in Mechanical Engineering, Electrical Engineering, Civil Engineering, or a related technical field. Certification in AutoCAD, Revit MEP, or BIM is an added advantage</p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons. Project Engineer who will be responsible for managing quantity surveying for major and extension projects shall undertake the following actions based on the project contract documents, approved documents on material submittals &amp; method statements:</p><p>Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p><p>Monitor all the cost and contractual aspect and report to the Client</p><p>Provide the required technical support, assistance and advice on all aspects of quantity surveying activities covering measurement, certification and payments</p><p>Collect and check quantity measurements from the project site and Prepare the Quantity Survey Reports</p><p>Prepare of monthly Contractor s Interim Payment Certificate and preparation of Final Account</p><p>Assist in the interpretation of the meaning or intent of the Contract Documents, and analysis of any claims which may be submitted by the contractor.</p><p>Review claims submitted by the contractor</p><p>Ensure that full documentation and records are maintained in the Client s office facility to properly substantiate all Interim and Final Payments to the contractor to a standard acceptable to the Client.</p><p>Ensure materials utilised at project site confirming to approved make and prepare report in case on non-conformance</p><p>Co-ordination with project managers</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in Engineering or related field. Professional engineering license preferred. In-depth knowledge of electrical systems, codes, and standards. Proven experience in project management and team leadership.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Civil Inspector to oversee and verify civil works for a Combined Cycle Gas Turbine (CCGT) power plant during construction and pre-commissioning. The role ensures compliance with drawings, specifications, ITPs, method statements, and applicable standards , with a strong focus on quality, safety, and timely delivery . You will work closely with the EPC/Contractor, Owner s Engineer, and HSE teams to ensure all civil and structural works meet project requirements.</p><p>Site Supervision &amp; Quality Control</p><ul><li>Inspect and supervise civil and structural works : foundations (GT/HRSG/STG/transformers), pedestals, pipe racks, control building, cooling towers/basins, chimneys/stacks, tanks, equipment foundations, culverts, underground utilities (stormwater, sewer, potable water, firewater), approach roads, pavements, trenching/backfilling, fencing, and buildings/ancillaries.</li><li>Verify compliance with approved IFC drawings , project specifications , ITPs , method statements , and codes/standards (e.g., ACI, ASTM, AISC/BS EN, BS 8007/BS 8110/Eurocodes where applicable).</li><li>Monitor and witness concrete works (formwork, rebar fixing, embed plates, anchor bolts, grouting), earthworks (compaction per Proctor/field density), asphalt , waterproofing , structural steel erection , painting/coating , rebar , precast , and piling (if applicable).</li><li>Review and approve material deliveries against MARs and MTCs ; ensure traceability and proper storage.</li><li>Coordinate material testing with labs: slump, compressive strength, trial mixes, FDT, plate load tests, rebar tensile/bend tests, weld NDT (if scope overlaps), coating DFT checks, etc.</li></ul><p>Documentation &amp; Reporting</p><ul><li>Implement and maintain inspection records , RFI/WIR logs, checklists , daily site reports , NCRs , SNCs , CARs , and punch lists .</li><li>Review and comment on method statements , ITPs , shop drawings , as-builts , and red-line markups .</li><li>Support QA/QC audits , root-cause analysis , and preventive/corrective actions .</li><li>Assist with turnover dossiers , as-built packages , and handover to commissioning for civil scope.</li></ul><p>Coordination &amp; HSE</p><ul><li>Interface with EPC/contractors , Owner s Engineer , client representatives , and multi-discipline teams (mechanical, electrical, I&amp;C) to plan civil works and resolve clashes (cable trenches vs foundations/utilities, elevations, sleeves, embeds).</li><li>Enforce HSE compliance per project HSE plan and Oman regulations; conduct toolbox talks related to civil activities; verify permits to work (PTW), lifting plans, excavations/shoring, confined space, and working at height controls.</li><li>Ensure temporary works design/inspection compliance (scaffolding tags, formwork stability, access platforms, edge protection).</li></ul><p>Schedule &amp; Progress</p><ul><li>Track daily/weekly progress against look-ahead schedules; flag risks/constraints (drawings, materials, manpower, plant).</li><li>Support readiness for commissioning by ensuring civil areas are defect-free and accessible; close punch items.</li></ul><p>Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma or Bachelor s in Civil Engineering or equivalent.</li><li>5 10 years of civil site supervision/inspection experience, with at least 3+ years on power plants (preferably CCGT or large industrial process plants).</li><li>Strong QA/QC background with hands-on experience in ITPs, method statements, RFIs, NCRs , and material testing .</li><li>Proven experience in: heavy foundations , equipment pedestals , anchor bolt alignment , grouting , underground utilities , roads &amp; drainage , structural steel , coatings , and buildings/architectural finishes .</li><li>Familiarity with relevant standards: ACI / ASTM / BS EN / AISC / Eurocodes , BS 8007 , BS 8110 (or current equivalents), ASD/ LRFD basics for steel verification.</li><li>Proficient in reading IFC drawings , rebar schedules , setting out , and as-built verification .</li><li>Excellent written/verbal communication in English ; ability to generate clear inspection reports.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Mace combines construction expertise with consultancy to unlock potential in every person or project and redefine the boundaries of ambition. Our values shape the way we consult and define the people we want to join us on our journey.</span></p><br><p><span><strong>The project:</strong></span></p><br><p><span>The programme includes the development of a state-of-the-art port facility with the capacity to process millions of tonnes of bulk cargo annually, incorporating marine infrastructure, landside logistics, transportation links, utilities, and operational facilities. Scheduled for completion later this decade, the project represents one of the region's most significant port and industrial infrastructure investments.</span></p><br><p><span>This is a unique opportunity to contribute to a complex, large-scale development that will play a pivotal role in supporting economic diversification, industrial growth, and global supply chain connectivity. Candidates will have the chance to work alongside multidisciplinary teams in a dynamic environment, helping to shape a strategic piece of infrastructure with long-term regional impact.</span></p><br><p><span><strong>You’ll be responsible for:</strong></span></p><br><ul><li><span>Overseeing the execution and compliance of all project contracts.</span></li><li><span>Supporting the resident engineer in drafting and issuing contractual correspondence to contractors.</span></li><li><span>Ensuring delivery aligns fully with contract terms and agreed conditions.</span></li><li><span>Working closely with the resident engineer, team leader and client to maintain contract adherence across all project activities.</span></li><li><span>Works collaboratively towards the common goal of net zero carbon transition and share responsibility for the proactive identification and management of the associated carbon emissions and reductions during the delivery of work.</span></li></ul><p><span><strong>You’ll need to have:</strong></span></p><br><ul><li><span>A relevant bachelor’s degree (postgraduate qualification in contract management preferred).</span></li><li><span>Progressing toward chartership with a recognised professional body and ongoing professional development.</span></li><li><span>Minimum 20 years’ experience in project/contract management on major construction or infrastructure projects.</span></li><li><span>Proven experience preparing, managing, and overseeing large-scale contracts.</span></li><li><span>Strong knowledge of FIDIC conditions of contract (preferred).</span></li><li><span>Experience in a similar role on at least two port construction projects valued at USD 400M+ each.</span></li></ul><p><span><strong>Our values</strong></span></p><br><p><span><strong>Safety first - Going home safe and well: </strong>We champion a safe, diverse, and inclusive working environment, understanding the importance of well-being in every team.</span></p><br><p><span><strong>Client focus - Deliver on our promise: </strong>We own the quality of deliverables and strategic outcomes and build long-term relationships with our clients.</span></p><br><p><span><strong>Integrity - Always do the right thing:</strong> We influence positive outcomes within our industry while always aligning with our compliance obligations.</span></p><br><p><span><strong>Create opportunity - For our people to excel:</strong> We champion a continuous improvement culture throughout all activities, inspiring our people and teams to develop.</span></p><br><p><br><span>Mace is an inclusive employer and welcomes interest from a diverse range of candidates. Even if you feel you do not fulfill all the criteria, please apply, as you may still be the best candidate for this role or another role within our organisation.</span></p><br><p><br><span>We are also open to discussing part-time, flexible, and hybrid working options if suitable within the role.</span></p><br><p><span>#LI-Onsite</span></p><br> </div>

<p>Overall Purpose of the Role: A Sales Engineer, or Customer Engineer, is a sales professional who specializes in understanding all of the technical aspects of a technical Bus and explaining them to potential consumers. Their duties include consulting on bus development, explaining product features to customers during live demonstrations and negotiating contract terms.</p><p>Reporting To: Sales and Marketing Manager</p><p>Key Responsibilities:</p><ol><li>GENERAL AND TASK MANAGEMENT<br>Implement divisional set strategies to achieve growth objectives and enhance overall sales achievements.<br>Implement the Market segmentation strategies; Geographically and by type of business.<br>Screen the designated territory and classify customers accordingly.<br>Assist Customers to properly select the best commercial transport solution for their application upon gaining a clear understanding of their businesses and requirements; Establish and maintain good working relationships with them to encourage repeat and referral business.<br>Monitor market and competitor activity, trends and demands, and inform appropriate persons within the organization<br>Develop an in depth understanding of the customers business and identify sales opportunities for products.<br>Prepare and deliver product technical presentations that explain product features, competitive advantages, or services to prospective customers.<br>Ability to work in a high-stress sales environment and multitask<br>Work closely with operations team to understand the different features available in KM products.<br>Prepare monthly and weekly sales reports to the management.<br>Answer and receive enquiries from various national and international customers.<br>Participate in national and international exhibitions, meetings to ensure having a good place in market.<br>Conduct market research and prepare market forecast report to the line manager to be presented in the market.<br>Following up the market trend and knowing the GCC and MENA region bus industry references.</li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li>Excellent knowledge in bus application and segments.</li><li>Excellent drive line technical knowledge</li><li>Excellent telematic and ITS knowledge</li><li>Proven Sales experience</li><li>Team player, Exceptional Presentation Skills, Proactive work style, creativity, energy</li><li>Excellent Knowledge of office management systems and procedures.</li><li>Excellent time management skills and ability to multi-task and prioritize work.</li><li>Attention to detail and problem-solving skills.</li><li>Excellent written and verbal communication skills.</li><li>Strong organizational and planning skills.</li><li>Excellent Interpersonal skills.</li><li>Excellent customer services attitude.</li><li>Excellent Negotiation and social problem-solving skills.</li><li>Ability to work in a high-stress sales environment and multitask</li><li>Bachelor s Degree in Business administration, Sales and Marketing or Mechanical /Electrical Engineering.</li><li>Proficiency in the use of Personal Computers, and knowledge of Microsoft applications.</li><li>Professional experience in the Truck Business, medium or heavy duty.</li><li>Commercial Automotive or Heavy Equipment.</li><li>Vast Knowledge of the local Gulf market dynamics.</li><li>Able to communicate fluently in English, written and spoken.</li><li>Arabic is a definite plus.</li><li>Minimum of 5 years of Sales experience in Automotive industry.</li><li>After-sales experience.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Summary:</strong><br> We are looking for a motivated and detail-oriented professional with a background in fire fighting systems engineering to join our team as a Project Engineer – Fire Fighting System. The ideal candidate will combine technical expertise with strong selling skills and the ability to confidently communicate complex solutions. You will play a key role in delivering high-quality fire protection projects while collaborating across departments and ensuring client satisfaction. If you are passionate about fire safety engineering and enjoy developing solutions in a dynamic environment, we invite you to apply. </p><br><br>Key Responsibilities – Project Engineering and Fire Fighting System Management<ul> <li>Manage the planning, execution, and delivery of fire fighting system projects from inception through to completion, ensuring adherence to relevant codes and standards.</li> <li>Liaise with clients, consultants, contractors, and internal stakeholders to establish technical requirements, address queries, and ensure alignment throughout project phases.</li> <li>Prepare and review system designs, material submittals, method statements, and as-built documentation, ensuring technical accuracy and compliance.</li> <li>Attend site meetings, carry out inspections and technical assessments, and provide clear direction to installation teams.</li> <li>Identify and resolve project challenges through effective problem solving and proactive decision making.</li> <li>Assist the sales team by providing technical support, preparing accurate project quotations, and contributing to tender submissions as required.</li> <li>Track project progress, control costs, and ensure delivery against timelines and client expectations.</li> <li>Promote a strong safety culture and adherence to best practices at all project locations.</li> </ul>Required Skills – Selling Skills, Technical Knowledge, and Communication for Fire Fighting Systems<ul> <li>Proven selling skills in a project or engineering context, with the ability to present fire protection solutions and influence stakeholders.</li> <li>Comprehensive technical knowledge of fire fighting systems, including design, installation, testing, and compliance with international and local codes (NFPA, Civil Defence, or equivalent).</li> <li>Excellent communication skills, both verbal and written, with the capability to explain complex concepts to clients and colleagues.</li> <li>Competence in reading schematics, engineering drawings, and producing technical documentation.</li> <li>Experience using relevant engineering software and standard office applications.</li> </ul>Qualifications &amp; Experience – Project Engineer for Fire Fighting Systems<ul> <li>Bachelor’s degree in Mechanical Engineering, Fire Protection Engineering, or a closely related discipline.</li> <li>Minimum 3 years' experience in project engineering or technical roles within the fire fighting, MEP, or building services industry.</li> <li>Direct experience managing installation or commissioning of fire suppression systems, sprinklers, pumps, hydrants, and associated equipment is highly desirable.</li> <li>Familiarity with local regulatory frameworks and fire safety standards is a strong advantage.</li> </ul>What We Offer – Growth Opportunities and Supportive Team Culture<ul> <li>Structured opportunities for career development and technical upskilling in fire safety engineering.</li> <li>Comprehensive induction and continuous training on state-of-the-art fire protection technologies.</li> <li>Inclusive, gender-neutral, and collaborative workplace committed to employee success and innovation.</li> <li>Involvement in prestigious and diverse fire protection engineering projects.</li> </ul> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: System Senior Engineer</p><p>Reports To: IT Infrastructure Manager / Systems Manager</p><p>Job Details</p><p>Number of Vacancies: 2 Positions</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All Governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The System Senior Engineer is responsible for supporting the administration, maintenance, and optimization of the organization's IT infrastructure and enterprise systems. The role ensures the availability, reliability, security, and performance of servers, operating systems, virtualization platforms, and related infrastructure while providing technical support for system implementation, monitoring, troubleshooting, and continuous improvement.</p><p>Key Responsibilities</p><p>Install, configure, monitor, and maintain servers, operating systems, and enterprise infrastructure.</p><p>Monitor system performance, availability, and capacity to ensure reliable business operations.</p><p>Perform system administration tasks, including user account management, access control, and system configuration.</p><p>Troubleshoot and resolve system, server, and infrastructure-related incidents.</p><p>Support the implementation of new systems, upgrades, patches, and infrastructure enhancements.</p><p>Perform system health checks, preventive maintenance, and performance optimization.</p><p>Assist in backup, disaster recovery, and business continuity activities.</p><p>Ensure compliance with IT security policies and infrastructure standards.</p><p>Maintain technical documentation, system configurations, and operational procedures.</p><p>Coordinate with vendors and technical teams to resolve infrastructure issues.</p><p>Participate in infrastructure projects, testing, and technology improvement initiatives.</p><p>Perform any other duties assigned by management within the scope of the role.</p><p>Working Conditions</p><p>Office-based work environment.</p><p>Regular collaboration with IT Infrastructure, Network, Cybersecurity, and business teams.</p><p>May occasionally be required to provide after-hours support during planned maintenance, system upgrades, or critical incidents.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Bachelor's Degree in Information Technology, Computer Science, Information Systems, Software Engineering, Computer Engineering, or a related field.</p><h2>Experience</h2><p>Practical Experience: 0 (No prior work experience required)</p><p>Fresh graduates are welcome to apply.</p><h2>Technical Skills</h2><ul><li>Basic knowledge of Windows Server and Linux operating systems.</li><li>Understanding of Active Directory, DNS, DHCP, and Group Policy concepts.</li><li>Basic understanding of virtualization technologies such as VMware or Hyper-V.</li><li>Familiarity with backup and recovery solutions.</li><li>Basic knowledge of networking concepts, including TCP/IP, LAN/WAN, and network security.</li><li>Understanding of cloud computing platforms (Microsoft Azure or AWS) is an advantage.</li><li>Familiarity with Microsoft Office applications.</li><li>Strong analytical and troubleshooting skills.</li></ul><h2>Soft Skills</h2><ul><li>Strong problem-solving and analytical abilities.</li><li>Excellent communication and interpersonal skills.</li><li>Ability to work effectively in a team environment.</li><li>Good organizational and time management skills.</li><li>Attention to detail and commitment to service quality.</li><li>Ability to prioritize tasks and work under pressure.</li><li>Willingness to learn emerging technologies and continuously develop technical skills.</li></ul><p></p></section>

<ul><li>Lead project planning, scheduling, and budgeting to ensure timely and cost-effective project delivery.</li><li>Coordinate with engineers, architects, and contractors to align project objectives and resolve any technical challenges.</li><li>Oversee site operations, ensuring compliance with safety regulations and environmental standards.</li><li>Manage stakeholder communications, keeping clients informed on project progress and addressing concerns proactively.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Civil Engineering or related field, with a Master's degree preferred for advanced projects.</li><li>Minimum of 5 years of relevant experience in civil engineering project management, with a proven track record of successful project delivery.</li><li>Professional Engineer (PE) license or equivalent certification is highly desirable.</li><li>Familiarity with industry standards and local regulations specific to the construction environment.</li></ul>

<p>PDO approved GRE inspector - (High Pressure - Non Metallic) </p><br><ol><li><p>Maintain records of calibration, inspection and testing equipment.</p></li><li><p>Ensure availability of appropriate version of applicable work documents.</p></li><li><p>Witness qualification procedures, tests and certify the results.</p></li><li><p>Provide feed-back to Site Quality Engineer or next immediate authority in quality organization chart (where SQE is not identified) on the day to-day quality issues.</p></li></ol><br><br><br><p><strong>Desired Candidate Profile</strong></p><p>Qualifications: Shall be HNC or HND with minimum of 4 years of inspection experience in construction industries out of which 2 years shall be in the construction of oil and gas facilities on relevant Non-metallic pipeline / piping construction. </p><p>2 years of experience working with Non-metallic manufacturer may be considered to give equivalent competence. </p>

<p>Job title Sr. Engineer, Technical Safety Grade Stream Operated Assets Function Projects Delivery Engineering Location Oman Muscat / Project Sites Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Manager, Technical Safety Direct Reports - Job purpose Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main Tasks and Responsibilities Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications. Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities. Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation. Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent). Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP. Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects. Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards. Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase. Support the preparation and review of technical documentation for regulatory submissions and engineering authority approvals. Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle. Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes. Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments. Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly. Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture. Perform other related duties as assigned. Key interactions Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function. External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities. Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</li><li>Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (T V or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</li><li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li><li>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</li><li>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</li><li>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</li><li>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</li><li>Exposure to Fire &amp; Gas system design and philosophy development.</li><li>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</li><li>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</li><li>Strong analytical and problem-solving skills.</li><li>Good communication skills, verbal and written.</li><li>Attention to detail and high level of technical accuracy.</li><li>Ability to work effectively in multidisciplinary project teams.</li><li>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</li><li>Ability to manage competing priorities in a project environment.</li><li>Cultural sensitivity in a multinational environment.</li><li>Computer literacy including MS Office and engineering software.</li><li>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</li><li>Quantitative and qualitative risk assessment techniques.</li><li>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</li><li>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</li><li>Fire &amp; Gas detection system design and philosophy.</li><li>Safety Case development and Major Accident Hazard (MAH) management.</li><li>Process safety engineering principles.</li><li>Applicable international standards (API, IEC, NFPA, IP codes).</li><li>Technical documentation and report writing.</li></ul>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title TL Instrument SR2 Grade Stream OQ RPI Function Assets Management SR2 Instrument Location Oman Suhar Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Head of Assets Management SR2 Direct reports 10: <br> Sr/ Engineer (1) <br> Supervisor (1) <br> Sr /Specialist (2) <br> Sr Technician/ Technician (6) Job purpose <br> Leads, and coordinates, the Instrument Maintenance Works, and the designated team for SR2 and all related operations under Head of Assets Management SR2 scope, acting as Technical Service provider of maintenance and execution of minor projects, modifications in accordance with the technical standards to maintain the assets through: (1) Leading the design Maintenance instrument services on planned / un-planned maintenance works utilizing best practice. (2) Coordination and supervision of assets, products and maintenance work in the designated area, (3) Implement plans and coordinate instrument maintenance works (4) Lead the designated staff (team) and external contractors in performing electrical maintenance services on planned / un-planned maintenance (CM, PM &amp; TA) activities ; in order to ensure plant equipment availability, reliability &amp; optimization of cost / resources while facilitating smooth operations of the plant to meet operational targets. <br> <br> The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by IT Technology platform, HSE standards, Omani government &amp; other legal justifications, and best international practices in consonance with national objectives Main tasks and responsibilities <br><br> SR <br> Plant Area Acronym Details Area1 CDUs, VDU &amp; DCU Crude / Vacuum Distillation <br> Area2 RFCC Residue Fluidized Catalytic Cracking <br> Area 3,4,5 <br> HCU, <br> Hydrotreaters <br> HGU <br> <br> Hydrocracker Unit <br> Hydrotreaters : Hydro-desulfurization (HDS) to remove sulfur and nitrogen compounds from natural gas and other refined petroleum products like diesel, gasoline, and jet fuel. <br> Hydrogen Generation Unit : Pre-desulfurization section, followed by desulfurization, reforming and process gas cooling with high temperature shift conversion to increase the hydrogen content of the process gas. <br> Area 6 Offsite Operations Tank Farm, Waste-water Treatment, Sulfur Granulation, Non-Plant areas Utilities Utilities Steam, fuel, various waters, air, electric power, and sewers, <br> <br>Instrument <br> Equipment Lead the teams for the execution of Maintenance works related with the following equipment / aspects: <br> Pressure transmitters These instruments measure the pressure of fluids or gases in pipes, tanks, and vessels. They are used to ensure that the process is operating within safe pressure limits. Temperature transmitters gauges, Thermowells, <br> Thermocouple Assemblies. These instruments measure the temperature of fluids or gases in various process equipment, such as heat exchangers, reactors, and distillation columns. <br> They help to ensure that the process is operating within the desired temperature range. Flow meters These instruments measure the flow rate of liquids and gases in pipes and vessels. They are used to monitor the amount of material being transferred between different process stages. Level transmitters These instruments measure the level of liquids and solids in tanks and vessels. They are used to ensure that tanks are not overfilled or emptied too quickly, which could result in safety hazards or process disruptions. Analyzers These instruments measure the chemical composition of process streams. They are used to monitor the quality of products and ensure that the process is operating within the required specifications Control valves / Instrument Manifold / Positioners. These are critical components that control the flow of fluids in process equipment. They are used to adjust the flow rate, pressure, and temperature of the process stream to maintain optimal process conditions. Safety relief valves These are critical components that protect equipment and personnel from overpressure conditions. They are designed to open automatically when the pressure exceeds a predetermined level, releasing excess pressure and preventing equipment damage or personnel injury. <br> <br> Accountabilities: <br> Team management: <br> Leading a team of Instrument maintenance engineers, supervisors, and technicians by assigning Instrument maintenance tasks, monitor the progress, providing feedback, training, and manage the team performance. <br> Develop and provide effective Training Program for the development of young engineers. <br> Evaluate job performance for the assigned maintenance team and assist Head of Maintenance in setting key performance indicators for the department. <br> Provide guidance &amp; support to maintenance team on identifying critical issues, repetitive failure of rotating equipment (RCA) &amp; work backlogs. <br> Lead the development and ensures execution of Training Program for the development of young engineers. <br> Maintains technical expertise in functional areas of process Instrument. <br> Reviews policies of warehouse materials/spare parts and determines strategy of their handling and procurement <br> Develops IDP of Omanis within the section, prepares training programs and monitors their implementation <br> Participate in Management of Change (MOC) committee review meetings. <br> Monitors staff attendance, attitude and implements discipline within the section. <br> Prepare annual leave plans. <br> Equipment maintenance <br> Implements the Preventive Maintenance (PM) plan within his section. <br> Accountable for all work for instruments maintenance and calibration to the SR2 facility / buildings. <br> Accountable for continuous availability of Instrument equipment such as switchgear, transformers, motors, drivers, UPS/BC, generation system, communication system. <br> Ensure application of best work practices in execution of Instrument maintenance jobs. <br> Responsible for issuing Work Permits on Instrument side and implementing Lock Out Tag Out (LOTO) procedure. <br> In emergency drills or emergencies maintains close liaison with On-Scene Commander and Operation Coordinator, for ensuring quick restoration of power. <br><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Qualifications for this position are a bachelor in Instrument/Electronics Engineering or equivalent</p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><p>TL 8-10 years of relevant experience 10-12 years of relevant experience</p><p>Relevant experience in instrument Maintenance Services inclusive of 4 years of relevant experience as Maintenance Team Leader role (Oil &amp; Gas / Petrochemical or Refinery Plant experience preferred).</p><p>Experience in bids evaluation and knowledge of contracts management &amp; spare parts optimization.</p><p>Experience and knowledge in project planning, cost control, contract development, installation, trouble shooting, and start-up.</p><p>Sound judgment in technical matters with good skills in engineering field materials specifications and international standards.</p><p>Good experience in handling of Maintenance Contracts and shutdown related jobs.</p><p><strong>Knowledge of:</strong></p><p>Computerized Maintenance Management Systems (CMMS)</p><p>Expertise in SAP- PM</p><p>Process Equipment Life-Cycle Management</p><p>Experience in condition monitoring systems on rotating equipment.</p><p>Good knowledge in Quality Assurance, Quality Control and HSE plans.</p><p>Familiar with techniques for ensuring data integrity with various integration of information/ reports</p><p>Knowledgeable in HSE plans related to maintenance activities.</p><p>Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals.</p><p><strong>Instruments:</strong></p><p>Knowledge of instrument control loops.</p><p>Familiar with Systems, Applications and Products in data processing (SAP).</p><p>Experience on Local control station/ Plant interface bus and DCS.</p><p>Good knowledge of modern maintenance technologies &amp; maintenance Planning and execution of Instrumentation Equipment s, Analysers, Calibrations, control systems, ESDs</p><p>Good knowledge of Foundation Field bus Instrumentation .</p><p>Proficient in Functional safety , SIL &amp; ESD Instrumentation and Maintenance requirements.</p><p><strong>Soft:</strong></p><p>Leadership and people management skills</p><p>Demonstrated leadership impact to deliver improved and sustained performance</p><p>Through use of facts</p><p>Troubleshooting and result oriented</p><p>Able to build relationships within department staff and contractors with a focus on collaboration.</p><p>Ability to manage multiple priorities in a diversified and critical environment.</p><p>Verbal and writing reporting skills-effective Communication</p><p><strong>Technical</strong></p><p>Computer Literacy including MS Office</p><p>Root Cause Analysis (RCA)</p><p>Reading and interpreting engineering drawings</p><p>Project Management</p><p>Developing and Modifying Technical Procedures</p><p>Ability to align the requirements of operations and maintenance</p><p>Familiar with techniques for ensuring data integrity with various integration of information/ reports</p><p>Knowledge in estimating, budgeting, and cost control.</p><p>Process automation protocols, such as (HART, Profibus and SDS).</p><p>Entis Tank management system and tank gauging.</p><p>Instruments calibration.</p><p>Conducting Safety Integrated Level (SIL) Study.</p><p>Quality and safety standards.</p><p>Bid Review.</p><p></p></section>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Principal safety engineer</h4> <p>Minimum of 20 years total experience in engineering or consultancy of oil and gas facilities, including a minimum of 15 years’ experience in TSE in onshore oil and gas facilities with demonstrated TSE deliverables development and assurance experience (BP, Shell, PDO projects experience is mandatory).</p> <ul> <li>Track record of managing major oil and gas engineering projects as lead safety engineer (CAPEX > 100 million USD) spanning various project life cycle stages such as feasibility, concept, FEED, execute, project to asset transition.</li> <li>Demonstrated experience in development and assurance of:</li> <ul> <li>HSE philosophy, fire and gas philosophy, F & G cause and effects, F & G layouts, F & G mapping.</li> <li>FEA/FGDEA, flare radiation and dispersion studies, safety equipment layouts, input to facility layouts/facility siting and layout studies, EPZ calculation, QRA. Experience/conducted studies using Shell FRED, SHEPHERD software and/or other PEM/risk integration software. Formal certification preferred.</li> <li>Hazardous area classification, critical element identification, performance standards, bow ties.</li> <li>ALARP (as low as reasonably practicable), design HSE case, operations HSE case, AIPSM (asset integrity-process safety management) and HEMP (hazard and effect management process).</li> <li>Loss prevention aspects such as fire safety, fire protection design (FW demand, hydraulics, surge, PFDs/P & IDs, etc.), escape and fire fighting design.</li> <li>Human factors engineering studies experience (valve criticality, HFE screening, etc).</li> </ul> <li>Facilitated/led workshops for technical safety, which may include but not be limited to HAZID, HAZOP, bowties, ALARP demonstration, MOPO/SIMOPs workshop, SCE identification workshops, DEM1/DEM2/LFI screenings and demonstrations and other HEMP studies.</li> <li>Adequate involvement in safeguarding reviews such as design review, HAZOP, IPF, etc.</li> <li>Involvement in vendor documents evaluations (e.g. technical bid evaluation, datasheets/specifications/MR).</li> </ul> <p>Bachelor’s degree in chemical, mechanical or process safety engineering.</p> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<p>We have an opening for an HSSE Engineer with specialized expertise in Process Safety Management (PSM) and Fire safety, along with relevant experience in similar industries and operational environments. Please find below the key requirements and preferences for this role.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Position Requirements</strong></p><br><ul><li><p>PSM background with strong HSE expertise (primary focus)</p></li><li><p>Mechanical Engineering or Fire Safety Engineering qualification preferred</p></li><li><p>Proven experience in a similar role within the petrochemical, polymer, PET, or related process industries</p></li><li><p>Strong knowledge of fixed fire detection and fire protection systems</p></li><li><p>SAP and other relevant software knowledge</p></li><li><p>Experience leading and managing teams</p></li><li><p>Quality-driven mindset with strong operational focus</p></li><li><p>Strong stakeholder management and leadership capabilities</p></li></ul><br><p>Please note that expectations from global, regional, site management, and operations leadership for this role are exceptionally high.</p><br><p><strong>Compensation & Benefits</strong></p><ul><li><p>Salary: Up to <strong>OMR 1,350 per month</strong></p></li></ul><p>Family benefits provided</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are hiring an experienced Water Desalination Plant Engineer for a reputed company in Oman. The ideal candidate should have hands-on experience in the installation, operation, maintenance, and design of water desalination plants, along with strong mechanical engineering knowledge.</p><p>Key Responsibilities</p><ul><li>Install, assemble, and commission water desalination plants.</li><li>Perform operation and maintenance of desalination systems.</li><li>Read and interpret technical drawings and engineering documents.</li><li>Prepare technical reports and maintenance records.</li><li>Troubleshoot plant equipment and ensure smooth operations.</li><li>Follow safety and quality standards during all activities.</li></ul><p>Salary: 74000 INR Per Month</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements</p><ul><li>Bachelor's Degree in Mechanical Engineering.</li><li>Minimum 4 years of experience in water desalination plant operation and maintenance.</li><li>Experience in installation and design of desalination plants.</li><li>Ability to read technical drawings and prepare reports.</li><li>Good English communication skills.</li><li>Age: Below 40 years.</li></ul><p></p></section>

<p>Provide robust production-engineering expertise to the subsurface development of the Operated Assets Subsurface function, under the direction of the TL Production Engineer BISAT Development, by supporting field-based production activities, planning production, well design, and completion, and applying production-engineering practices to well and reservoir management, well design and completion, and Integrated Production Modelling (IPM), in order to optimise well and field performance and support the safe, reliable, and efficient production of significant oil and gas deposits.</p><p>The position will act in accordance with the OQEP's Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani's government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><ul><li>Provide robust technical production-engineering expertise, support, and innovative solutions for the execution of the production-engineering process, ensuring common engineering principles and concepts are applied; may handle a large scope of activities simultaneously and provide guidance to junior engineers and trainees.</li><li>Optimise well production through daily well-surveillance monitoring and troubleshooting of well-performance issues.</li><li>Hold direct responsibility for a range of activities including well surveillance, frac-job design and implementation, well testing, artificial-lift selection and design, completion and workover design and execution, well-intervention proposals, and well-stimulation design and execution.</li><li>Analyse and interpret field information using available engineering tools, making recommendations to optimise production and support field development.</li><li>Contribute to monthly production planning and reservoir-surveillance planning as required.</li><li>Hold direct responsibility for monitoring well failure rates, conducting the required Root Cause Failure Analysis (RCFA), and recommending solutions to reduce such rates.</li><li>Participate in integrated field studies for maturing hydrocarbon resources.</li><li>Evaluate well and reservoir performance and recommend production-improvement opportunities.</li><li>Provide production-engineering input to business planning and well proposals, and participate in the preparation of development plans and optimisation studies to maximise project value.</li><li>Work closely with Reservoir Engineers and Geologists to maximise the value of assigned assets.</li><li>Ensure all evaluations are documented and related data is handled in accordance with the Company's Data Management Standards.</li><li>Work safely and proactively promote the Company's occupational health, safety, security, and environment culture, ensuring compliance with HSE and process-safety requirements and participating in HSE programs.</li><li>Fulfil stand-by / on-call duties when required.</li><li>Perform other similar duties as assigned by the TL Production Engineer BISAT Development.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: TL Production Engineer BISAT Development and the Subsurface &amp; Operation 60&amp;48 team, and enabling functions (Reservoir Engineering, Geoscience, Well Delivery, Operations, Facilities, and HSSE).</li><li>External: Contractors, service providers, and technical consultants; OQ Group (parent-company interfaces, as applicable).</li></ul><p><strong>Notable Working Conditions</strong></p><p>Combination of field operational environment and office-based technical work; regular presence at well sites and operating facilities to support well surveillance, production troubleshooting, well interventions, stimulation, workover activities, and production optimisation. The role may require working in remote operational areas, exposure to live production environments, and participation in stand-by / on-call duties as required.</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><ul><li>A minimum of 6+ years' relevant experience in production engineering within the upstream oil and gas industry.</li><li>Experience in production optimisation, well surveillance, and troubleshooting of well-performance issues.</li><li>Experience in artificial-lift selection and design, completion and workover design, well intervention, and stimulation.</li><li>Experience in well testing, frac-job design, and RCFA.</li><li>Proficiency in industry-standard production-engineering and nodal-analysis tools (e.g., PROSPER/GAP or equivalent).</li><li>Good understanding of reservoir behaviour, production operations, and completion procedures.</li><li>Experience working in a multidisciplinary team environment with Reservoir Engineers and Geologists.</li><li>Strong interpersonal and communication skills (verbal and written), with proficiency in written and spoken English.</li></ul><p><strong>Behavioral / Leadership Competencies:</strong></p><ul><li>Analytical thinking and sound engineering judgement.</li><li>Collaboration across multidisciplinary teams.</li><li>Effective communication of technical insights and risks.</li><li>Proactive problem-solving and continuous improvement.</li><li>Accountability and results orientation.</li><li>Commitment to HSSE, process safety, integrity, and high technical standards.</li></ul><p><strong>Technical Competencies:</strong></p><ul><li>Production optimisation and well-performance management.</li><li>Artificial lift, completion, and workover design.</li><li>Well intervention, stimulation, and frac-job design.</li><li>Well surveillance, testing, and RCFA.</li><li>Integrated Production Modelling (IPM) and nodal analysis.</li><li>Data management and technical reporting.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><ul><li>Bachelor s degree in Petroleum Engineering or equivalent</li><li>Master s degree (preferred)</li><li>Language requirements Excellent knowledge of written, read, and spoken English (required).</li></ul><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><ul><li>A minimum of 6+ years' relevant experience in production engineering within the upstream oil and gas industry.</li><li>Experience in production optimisation, well surveillance, and troubleshooting of well-performance issues.</li><li>Experience in artificial-lift selection and design, completion and workover design, well intervention, and stimulation.</li><li>Experience in well testing, frac-job design, and RCFA.</li><li>Proficiency in industry-standard production-engineering and nodal-analysis tools (e.g., PROSPER/GAP or equivalent).</li><li>Good understanding of reservoir behaviour, production operations, and completion procedures.</li><li>Experience working in a multidisciplinary team environment with Reservoir Engineers and Geologists.</li><li>Strong interpersonal and communication skills (verbal and written), with proficiency in written and spoken English.</li></ul><p><strong>Behavioral / Leadership Competencies:</strong></p><ul><li>Analytical thinking and sound engineering judgement.</li><li>Collaboration across multidisciplinary teams.</li><li>Effective communication of technical insights and risks.</li><li>Proactive problem-solving and continuous improvement.</li><li>Accountability and results orientation.</li><li>Commitment to HSSE, process safety, integrity, and high technical standards.</li></ul><p><strong>Technical Competencies:</strong></p><ul><li>Production optimisation and well-performance management.</li><li>Artificial lift, completion, and workover design.</li><li>Well intervention, stimulation, and frac-job design.</li><li>Well surveillance, testing, and RCFA.</li><li>Integrated Production Modelling (IPM) and nodal analysis.</li><li>Data management and technical reporting.</li></ul>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Key responsibilities</h4> <p>Provide project management support and mechanical engineering guidance for industrial facilities and infrastructure projects.<br> Support the development and maintenance of engineering standards, specifications, and procedures.<br> Monitor contractor performance to ensure work is completed in accordance with approved drawings, specifications, quality standards, and project requirements.<br> Manage and control site activities to achieve project objectives within approved schedule and budget constraints.<br> Prepare and present project progress reports, forecasts, and status updates to management.<br> Lead projects through all project phases, from concept and scope development through technical evaluation, execution, commissioning, and handover.<br> Coordinate engineering activities and pre-operational testing required for successful commissioning and start-up.<br> Evaluate proposed projects and provide technical recommendations.<br> Prepare technical reports, specifications, and supporting project documentation.<br> Monitor and assess contractor performance and compliance with project requirements.<br> Follow instructions and guidance provided by the designated Project Manager or Engineer-in-Charge.<br> Ensure compliance with applicable health, safety, environmental, and quality standards throughout project execution.</p> <h4>Qualifications</h4> <p>Bachelor's degree in Mechanical Engineering.<br> Master's degree in Engineering, Management, or a Project Management certification is advantageous.<br> Chartered Engineer status is considered an advantage.</p> <h4>Experience & skills</h4> <p>Minimum 10 years of project, design, and engineering experience within heavy industrial environments.<br> Experience in brownfield industrial projects is preferred.<br> Strong knowledge of project management principles and practices.<br> Proficiency in SAP and Microsoft Office applications (Word, Excel, PowerPoint).<br> Working knowledge of engineering and drafting software such as AutoCAD.<br> Experience with project planning software such as Microsoft Project and/or Primavera.<br> Sound understanding of budgets, contractual requirements, business processes, and organizational decision-making.<br> Experience supervising installation and commissioning of bulk material handling equipment, including conveyors and associated static and rotating equipment.<br> Proven experience managing contractors and multidisciplinary project teams.<br> Strong written and verbal communication skills, including technical reporting.<br> Demonstrated decision-making, coordination, and stakeholder management capabilities.<br> Knowledge of standard contract terms and conditions.<br> Working knowledge of industrial safety practices and project execution requirements.</p> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.<br> And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.<br> And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<p>PRINCIPAL ACCOUNTABILITIES</p><p>1. Carry out interpretation of 2D and 3D seismic data from the historical seismic databank and from new data received from seismic surveys. Identifies subsurface structure/trapping mechanism and reservoir distribution utilizing geophysical software packages such as Petrel, Geo-Graphix, DSD etc.</p><p>2. Generating plausible geophysical and geological concepts for leads and prospects in all possible plays, with appropriate risks, volume and commercial analysis and in support of a growing inventory of exploration portfolio.</p><p>3. Establish and maintain up-to-date Exploration Prospect Portfolio for all prospects for all levels, shallow to deep plays.</p><p>4. Identify new oil and gas prospects based on comprehensive technical work mainly Geophysical and Geological, from a regional prospective to block and field/prospect level.</p><p>5. Perform detail evaluation of identified prospect to progress to well proposal, presenting to the Management and shareholders to seek approval to drill Exploration wells in which clear conclusions and recommendations are required to the management to make decisions.</p><p>7. Work closely with Exploration geologist and reservoir engineer on analysis work of new found traps to ascertain the most likely locations of reservoir tops and subsequent locations of potential wells.</p><p>8. Identify optimal drilling locations using knowledge of 3D seismic interpretation and knowledge of regional and prospect specific petroleum systems.</p><p>9. Seamless coordination of all exploration-related operations between relevant internal and external parties.</p><p>10. Involvement on Tender documentation preparation and evaluation of bids for any study pertaining seismic; such as seismic data acquisition, survey plan, Processing, Reservoir Characterization, VSP, prospect identification etc.</p><p>11. Follow up and Supervise specialist or outsourced studies of seismic evaluation.</p><p>12. Stays up to date with current developments in seismic and geophysical mapping techniques and software. The role will also involve participating in the assessment of new technology, methodologies and workflows</p><p>13. Provide mentorship, guidance and control as required to junior Daleel geoscience staff with respect to geophysical methods and evaluation procedures.</p><p>14. Follows and promotes all QHSSE policies of the Company at all times.</p><p>KEY CHALLENGES:</p><p>Ability to work in both; Exploration and Development environments</p><p>Supporting day-to-day operations on well delivering for Exploration/Appraisal wells</p><p>Works closely with other team members as and when required.</p><p>To complete the company KPI by drilling required number of Exploration wells per year.</p><p>Ability to interact with internal and external clients</p><p><strong>Desired Candidate Profile</strong></p>JOB KNOWLEDGE, SKILLS AND EXPERIENCE<br>Minimum Academic Qualifications: Bachelor's degree in Geophysics or a related discipline<br>Minimum Work experience: At least 12 years experience in Geophysics or Seismic Interpretation in a recognized oil company and integration of seismic, well and other data.<br>Knowledge of Oman plays and Petroleum systems.<br>Proven Exploration record in finding new oil and gas resources.<br>Experience upstream E&amp;P professional with familiarity in petroleum systems analysis, well data analysis, geological interpretation and prospect evaluation.<br>Maturation and development of new prospects.<br>Experience in workstation-based seismic interpretation from regional to prospect level.<br>Awareness of seismic acquisition and processing<br>An understanding of principles of rock physics and quantitative seismic interpretation would be desirable.<br>Must be a technically established engineer in the Geophysics and well skilled in mentoring and motivating new Geophysicist.