Computer Technician Jobs in Oman

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>JOB PURPOSE: To drive/operate heavy lifting equipment s as per the requirement from production division/Supervisor for fabrication/ installation /erection of blocks and shifting of materials/equipment in order to ensure that the activities of ship repair/conversion project works are conducted as per timelines, quality, health and safety standards established within ADC. KEY ACCOUNTABILITIES: Day-to-Day Operations Operator must have previous experience of operating all type of heavy lifting equipment s. Follow the shifting procedure/plans and travelling route/ load details etc. Familiar with heavy lifting vehicles and its system (for trouble shooting finding the route cause ) Good reading &amp; understanding command on operating function/lever (able to understand LCD parameter/function) Knowledge about loading / unloading and balance identification and fully aware about signal/and road signs as per the local ROP regulations. Co-ordination with production division and other heavy lift operators Aware about safety concern during operation/parking and Near miss/ incident/accident to be reported. Preferable if any certification course for heavy lifting transportation. Maintenance Activities Maintain tidiness and cleanliness of the equipment always. And perform routine pre and post inspections on equipment in order to ensure they are operating well and as per established Quality, health and safety standards. Carry out preventive maintenance of the equipment s such as lubricating the equipment and regular cleaning to ensure that the equipment is ready to use at all times. Prepare logbook for routine, preventive, breakdown maintenance of the equipment s in the industrial facilities in order to facilitate ease of access and reusability when required. Job Tracking and Reports Maintain tidiness and cleanliness of the equipment. Ensure work conforms to company safety policies, ROP rules and regulation. Inform immediately if any maintenance is required in the equipment. Coordination Coordinate with the Supervisor/senior Supervisor on all technical areas such as use of equipment s in order to ensure that the scheduled plans are completed on time. Preparing Reports Prepare daily reports on progress of jobs, which is allocated by the Supervisor. Report all daily activities in order to keep the Supervisor aware of the progress. Policies, Systems, Processes &amp; Procedures Follow all relevant Production Support departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner. Quality, Health, Safety, &amp; Environment Adhere to all relevant quality, health, safety and environmental procedures, instructions and controls and demonstrate the proper application and their importance in safe operations in order to ensure the safety of employees, quality of products/ services and environmental compliance can be guaranteed. Review and describe the need for emergency response procedures for various situations such as: electrical or mechanical failure, operator retrieval procedures and incidents in order to ensure continuity of operations in cases of emergencies.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Qualifications: 10+2 or any ITI trade certificate or equivalent trade certificate: Minimum Experience: 0-1 year of relevant experience, Heavy duty transporter operation (prefer shipyard experience) Operator must have valid Oman (ROP) License to operate heavy lift equipment s Job-Specific Knowledge &amp; Skills: Understanding of general daily routine maintenance of the equipment Equipment to be maintain in good condition &amp; prepare daily/weekly / Monthly check sheet Familiar with hydraulic &amp; electrical system of heavy equipment Good communication skills &amp; prepare lifting records (per lift/hours) Adherence to HSS rules/polices/procedures Communication skills</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <p> </p> <div> <strong>POSITION DESCRIPTION:</strong> <strong>Position Title:</strong> Mechanical Supervisor<br><strong>Reports to:</strong> Mechanical Lead<br><strong>Department:</strong> Maintenance Department<br><strong>Location:</strong> All OTTCO Terminals<br></div> <p> </p> <div> <strong>JOB PURPOSE:</strong> <p>Perform operations and maintenance of all mechanical systems and equipment across OTTCO s terminals, including pumps, compressors, valves, pipelines, tanks, and other static and rotating machinery. Ensure all mechanical maintenance and inspection activities are carried out efficiently, safely, and in accordance with approved company procedures, industry standards, and OEM recommendations to achieve maximum equipment reliability and asset integrity.</p> <p>The position will operate in alignment with OTTCO s Mission, Vision, Values, and Strategies, ensuring adherence to company policies, HSE regulations, and applicable Omani legal and environmental requirements. The incumbent shall promote operational excellence, continuous improvement, and sustainability through the application of best international practices supported by modern maintenance systems and technologies.</p> </div> <p> <strong> </strong> </p> <div><br> </div> <p> <strong> </strong> </p> <div> <strong>KEY RESPONSIBILITIES:</strong> <p> <strong>Operation &amp; Maintenance</strong> </p> <p> <span> <span> </span> </span>Perform preventive, corrective, and predictive maintenance of mechanical systems including pumps, compressors, tanks, valves, pipelines, and associated static/rotating equipment.</p> <p> <span> <span> </span> </span>Supervise all mechanical maintenance and repair activities to ensure they are conducted safely and in line with approved procedures, work instructions, and OEM standards.</p> <p> <span> <span> </span> </span>Lead and support troubleshooting of mechanical faults and equipment breakdowns, ensuring timely restoration and minimal production impact.</p> <p> <span> <span> </span> </span>Validate and enter all mechanical maintenance activities into the CMMS (SAP/Maximo or equivalent) and ensure proper record keeping.</p> <p> <span> <span> </span> </span>Conduct periodic inspections of mechanical facilities to identify issues, deterioration, or nonconformities requiring intervention.</p> <p> <span> <span> </span> </span>Supervise and certify equipment alignment, vibration analysis, balancing, and other critical maintenance activities. Coordinate with Operations for equipment isolation, handover, and recommissioning to ensure safe execution of maintenance work.</p> <p> <span> <span> </span> </span>Attend Daily operation-maintenance coordination meeting, YTT, and other departmental meetings.</p> <p> <span> <span> </span> </span>Participate and support in root cause analysis (RCA) for major equipment failures and implement corrective and preventive actions to avoid recurrence.</p> <p> <span> <span> </span> </span>Participate in shutdown/turnaround planning and execution, ensuring all mechanical activities are completed safely, on time, and within budget.</p> <p> <span> <span> </span> </span>Closely monitor and verify that all work order closures are completed to a high standard, with clear documentation and all required supporting attachments.</p> <p> <span> <span> </span> </span>Monitor, maintain, and continuously improve departmental KPIs by tracking performance metrics, analyzing trends, and implementing corrective actions to ensure alignment with operational targets and company objectives.</p> <p><br></p> </div> <p> <strong> </strong> </p> <p> </p> <div> <strong>QUALIFICATIONS, EXPERIENCE, &amp; SKILLS: </strong> <p> <span> <span> </span> </span>Bachelor s Degree in Mechanical Engineering or equivalent from a recognized university. </p> <p> <strong>Experience</strong> </p> <p> <span> <span> </span> </span>Minimum +6 years of experience in mechanical maintenance within tank terminal, oil &amp; gas, refinery, or petrochemical sectors.</p> <p> <span> <span> </span> </span>Demonstrated expertise in rotating equipment, mechanical seals, alignment, piping systems, and static equipment (tanks, pressure vessels, exchangers).</p> <p> <span> <span> </span> </span>Proven track record in supervision of EPC and maintenance contractors during shutdowns and major overhauls.</p> <p> <span> <span> </span> </span>Strong exposure to mechanical integrity programs, inspection schedules, and reliability analysis.</p> <p> <span> <span> </span> </span>Working knowledge of international standards such as API 610/650/682, ASME, ASTM, and ISO.</p> <p> <strong>Professional Certifications</strong> </p> <p> <span> <span> </span> </span>Authorized Mechanical/Rotating Equipment Maintenance Certification (where applicable).</p> <p> <span> <span> </span> </span>Training in Root Cause Analysis (RCA), Reliability Centered Maintenance (RCM), or Vibration Analysis is preferred.</p> <p> <span> <span> </span> </span>HSE or PTW certifications such as NEBOSH/IOSH are desirable.</p> <p> <span> <span> </span> </span>Familiarity with SAP or CMMS systems for maintenance management is advantageous.</p> <p> <strong>Technical Competencies</strong> </p> <p> <span> <span> </span> </span>Deep knowledge of pumps, compressors, valves, hydraulic systems, HVAC, and pipeline systems.</p> <p> <span> <span> </span> </span>Proficient in interpreting P&amp;IDs, isometric drawings, and mechanical schematics.</p> <p> <span> <span> </span> </span>Skilled in troubleshooting, root cause analysis, and reliability improvement methodologies.</p> <p> <span> <span> </span> </span>Familiarity with corrosion mechanisms, mechanical integrity inspections, and cathodic protection systems.</p> <p> <span> <span> </span> </span>Capable of planning, scheduling, and managing shutdown and turnaround activities.</p> <p> <strong>Behavioral Competencies</strong> </p> <p> <span> <span> </span> </span>Strong leadership, problem-solving, and decision-making skills.</p> <p> <span> <span> </span> </span>Excellent coordination and communication across multidisciplinary teams.</p> <p> <span> <span> </span> </span>Proactive and detail-oriented, with a strong sense of accountability and ownership.</p> <p> <span> <span> </span> </span>High commitment to HSE culture and continuous improvement.</p> <p> <span> <span> </span> </span>Ability to work effectively under pressure and manage multiple priorities.</p> <p> <span> <span> </span> </span>Demonstrates integrity, professionalism, and alignment with OTTCO s corporate values and strategic vision.</p> </div> <p> <strong> </strong> </p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Senior Renewable &amp; ESS Engineer is responsible for providing specialized technical support for the integration, operational planning, and performance monitoring of Variable Renewable Energy (VRE) and Energy Storage Systems (ESS) within the OETC transmission network. The role supports the development and implementation of dispatch strategies for solar, wind, and battery assets to enhance grid stability, improve renewable energy utilization, and reduce operational constraints. The Senior Engineer analyzes renewable generation forecasts, monitors Battery Energy Storage System (BESS) State-of-Charge (SoC) and performance indicators, and supports the verification of Inverter-Based Resources (IBR) compliance with the technical requirements of the Grid Code and Transmission Security Standards.</p><p>Support the daily integration and scheduling of renewable energy resources by performing technical analysis to optimize dispatch and minimize curtailment. Analyze and support the operational strategy for Energy Storage Systems (ESS/BESS), including charging and discharging cycles for peak shaving, frequency response, and system reliability requirements. Assess the performance of forecasting tools for solar and wind generation and recommend improvements to reduce system imbalances. Review Inverter-Based Resource (IBR) technical performance and support compliance verification against Grid Code requirements for fault ride-through, voltage control, and frequency support. Monitor BESS State-of-Charge (SoC), availability, and health indicators to support readiness for critical grid services. Conduct performance analysis of renewable plants, identify deviations from forecasted output, and coordinate with relevant teams on corrective actions. Provide technical input to the Ancillary Services section on the role of BESS in fast frequency response (FFR), operating reserves, and other flexibility services. Participate in the technical review of new renewable and ESS project commissioning requirements to support smooth integration into the LDC dispatch environment. Prepare, review, and update Standard Operating Procedures (SOPs), guidelines, and technical instructions related to VRE and energy storage operations. Share technical knowledge with engineers and operators and support capability building in renewable energy technologies, ESS, and inverter-based power systems.</p><p>Knowledge and Understanding of Asset Management, QHSE Management System and IT Security Standard Requirements according to ISO55001, ISO 14001, OHSAS 18001 and ISO 27001 to carry out the assigned duties as per the roles and responsibilities matrix. Undertake additional responsibilities depending on Management and Business requirements.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree in Electrical Power Engineering (Master s specializing in Renewable Energy or Power Systems preferred )</li><li>Professional Experience: Minimum of 5 years of experience, in areas of Power System operations, Renewable Energy integration, Energy Storage System or Invertor Based resource management.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><strong>Accountability:</strong></span></p><br><p><span><span>Works independently at an advanced level completing a wide variety of assignments through the application of advanced design theories, techniques, and practices. Has substantial knowledge of relevant regulations, codes, manufacturing standards, and industry standard practices for the control, development, and application of deliverables. May provide discipline supervision for one larger or one or more smaller projects</span><span>.</span></span></p><br><p><span><span>Assists business development activities by maintaining an </span><span>up to date personal profile and resume. Builds positive working relationships with external parties such as the customer, suppliers, and contractors. Supports proposals by advising on the project execution strategy, estimating costs, writing proposal content, and presenting to customers. May be called upon to lead all or part of the technical proposal.</span></span></p><br><p><span><span>Supports the business by communicating team resource loading and skill requirements to a direct supervisor or the Discipline Design Chief. Ensures the project work is covered for vacation and unplanned absences. Mentors/trains and supports the delivery of training. Assists in the employee performance review process. Facilitates coverage of activities when people leave the team. Encourages knowledge of and compliance with requirements and processes. Works to resolve inter-discipline, vendor, and customer issues. Ensures discipline technical work and team activities meet all health, safety, environmental, and security requirements.</span></span></p><br> <span><span>Awarded a </span><span>2 or 3 year technical diploma with discipline specific training or an equivalent combination of education, training, and experience. Trained in leadership and project execution. Will be actively licensed with a local governing body where required by law.</span></span><br><span><span>Typically has 12+ years of relevant discipline experience. Has a competent understanding of regulations, codes, manufacturing standards, and industry standard practices.</span></span><br><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Ingénieur-e d'études senseurs inertiels F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p><br>Au sein du Centre d'Ingénierie des Modules Inertiels, vous êtes Ingénieur-e d'études en charge de travaux de développement des senseurs inertiels de Safran Electronics &amp; Defense.<br>Les senseurs inertiels Safran regroupent des accéléromètres et des gyromètres basés sur les toutes dernières technologies de senseurs vibrants et de MEMS.<br>Ces produits innovants, dont la taille et la consommation sont en rupture vis à vis des solutions traditionnelles, sont utilisés pour des missions de navigation / géolocalisation / guidage variées. Les applications possibles sont nombreuses : air, terre, mer mais également spatial.<br>Vous évoluerez dans un environnement de hautes technologies où l'interaction permanente avec nos nombreux experts et la richesse des équipements à disposition favorise l'innovation.<br>Plongé au cœur du développement des nouveaux produits SAFRAN, vous intervenez sur l'ensemble du cycle de vie des produits concernés.<br>A ce titre, vos principales missions sont :<br>- Etudes générales des algorithmes de pilotage et de calibration des senseurs inertiels<br>- Réalisation d'études de performance des senseurs inertiels, choix des structures algorithmiques, travaux d'architectures fonctionnelles et organiques, mise en place et recalage de simulateurs de référence<br>- Rédaction des spécifications techniques décrivant les algorithmes de pilotage et de calibration à implémenter<br>- Travaux préparatoires à la mise au point des senseurs inertiels (plan d'essais, fiches de test, mise en place / validation des montages d'essais sur moyens spéciaux)<br>- Réalisation des essais de caractérisation, dépouillements et analyses<br>- Contribution à l'élaboration du dossier de définition des produits<br>- Participation action à la construction des éléments de justification de la définition des produits (notes d'études, notes de calculs, notes d'analyse de résultats d'essais)<br>- Réalisation de travaux de mise au point sur prototypes<br>- Apporter un support technique auprès des équipes en centres de production (expertises)</p><br><br><p>Déplacements occasionnels en centre de production (Montluçon)</p><br><br><p>Diplômé-e d'un Bac+5 généraliste ou d'un doctorat avec une spécialisation en Electronique / Automatique<br>La connaissance des technologies de l'inertie est un plus !<br>Capacité d'abstraction pour compréhension du fonctionnement des senseurs inertiels, des traitements / électroniques de mise en œuvre.<br>Une première expérience en développement produit est préférable (2/3 ans mini), mais la porte n'est pas fermée à des profils moins expérimentés si la passion vous anime.</p><br><br><br> </div>

<p>The Fuels Manager (FM)/Alternate Site Manager (ASM) provides leadership and guidance to FUELS Department personnel. Responsible for the overall program management of FUELS assets. Manages asset receipts, accountability, serviceability, storage, security, periodic inspections and deployment. Establishes asset reconstitution production schedules to meet United States Air Forces Central (USAFCENT) requirements. Reviews asset reconstitution production, periodic maintenance, and inventory reports to ensure timely and accurate submissions to USAFCENT A4/RF. Provides guidance on environmental issues as they relate to fuel assets. Responsible for program quality assurance as part of ISO 9000 standards. The ASM portion of the position coordinates and oversees the day-to-day operations, maintenance, personnel, and services at assigned location ensuring quality to the customer as directed by Site Manager.</p><p>Job Duties &amp; Responsibilities</p><ul><li>Primary liaison between Amentum sites and USAFCENT on issues pertaining to FUELS.</li><li>Oversees reconstitution and preservation plan for FUELS based upon requirements and the Performance Work Statement (PWS), to include the calibration of meters, gauges and tools, functional testing of pumping systems and hydrostatic testing of fuel hoses.</li><li>Tracks FUELS deployments, ensuring timely delivery of assets.</li><li>Answers inquiries from Program Management and sites concerning various requests from the USAF and external agencies.</li><li>Attends staff meetings and provides management reports and briefings, as required.</li><li>Provides assistance, guidance and coordination on revisions of FUELS maintenance actions in response to changes in Air Force Publications, Technical Orders and the PWS.</li><li>Oversees Product Quality Deficiency Reports from submission to resolution.</li><li>Creates, coordinates, implements, and revises FUELS Standard Operating Procedures, Work Instructions and Training Plans, as required.</li><li>Conducts periodic staff assistance visits to all sites.</li><li>Performs other duties and TDY travel as directed by management.</li><li>Performs duties of Site Manager in Site Manager s absence.</li><li>Manages basic support services and accompanying labor force for assigned location.</li><li>Manages small team of U.S. nationals supervising skilled, semi-skilled foreign and local nationals.</li><li>Ensure that all requirements are met as defined in the Performance Work Statement.</li><li>Communicate new requirements, concerns, and issues to PMO for resolution.</li><li>Ensure that requirements are met for employee health, morale, and welfare.</li><li>Ensure that employees adhere to the Armed Forces and host nation standards of conduct concerning in-theater operations.</li><li>Effectively manage any employee management issues that may arise.</li><li>Closely supervises equipment and material within assigned area of responsibility.</li><li>Closely supervises the arrival, retrofit, and upgrade of equipment and material as assigned.</li><li>Conducts the weekly and monthly collection of data for quality input to PEBs or AFEB.</li><li>Submits timely reports required by the United States Government.</li><li>Conducts regular property inventories.</li><li>Perform other duties as assigned.</li></ul><p>Management Responsibility</p><ul><li>Provides functional management for FUELS issues program wide.</li><li>Manages day-to-day operations as assigned by Site Manager.</li><li>Performs Site Manager duties in Site Manager s absence.</li></ul><p>Knowledge &amp; Skills</p><ul><li>Ability to communicate effectively both verbally and in writing.</li><li>Capable of organizing data quickly and effectively.</li><li>Able to prepare and execute briefings.</li><li>Knowledge of the USAF maintenance management system, to include OLVIMS required.</li><li>Knowledge of the maintenance and operating procedures for Fuels Operational Readiness Capability Equipment (FORCE) desired.</li><li>Knowledge of FUELS industrial safety, quality, environmental procedures, material deficiency reporting and the USAF supply system required.</li><li>Proficiency in Microsoft software applications required, particularly MS Outlook, PowerPoint, Excel, Word, etc.</li><li>Shall be knowledgeable and supervise all aspects of assignment of qualified personnel, scheduling workload, developing programs and procedures to satisfy customer requirements, coordinating with on-base support, preparing official correspondence, evaluating improvement suggestions, and knowledge of chain of command and protocol.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>The Fuels Manager shall have a minimum of six (6) years of specialized experience in fuels hydrant operations and maintenance of bulk petroleum storage terminals.</li><li>The FM/ASM shall have a minimum of three (3) years of experience in logistics, project management, operations management or facilities management/maintenance field.</li><li>As a minimum, the Fuels OM&amp;R Manager shall have two (2) years of supervisory experience in fuel hydrants operations with emphasis in operations and environmental compliance.</li><li>Must be able to obtain and maintain a SECRET US Government Clearance.</li><li>Note: US Citizenship is required to obtain a SECRET Clearance.</li><li>Must have a High School Diploma or equivalent.</li><li>Bachelor s degree preferred but not required.</li><li>Ability to communicate effectively both verbally and in writing.</li><li>Capable of organizing data quickly and effectively.</li><li>Able to prepare and execute briefings.</li><li>Knowledge of the USAF maintenance management system, to include OLVIMS required.</li><li>Knowledge of the maintenance and operating procedures for Fuels Operational Readiness Capability Equipment (FORCE) desired.</li><li>Knowledge of FUELS industrial safety, quality, environmental procedures, material deficiency reporting and the USAF supply system required.</li><li>Proficiency in Microsoft software applications required, particularly MS Outlook, PowerPoint, Excel, Word, etc.</li><li>Shall be knowledgeable and supervise all aspects of assignment of qualified personnel, scheduling workload, developing programs and procedures to satisfy customer requirements, coordinating with on-base support, preparing official correspondence, evaluating improvement suggestions, and knowledge of chain of command and protocol.</li><li>Compliance with fire, safety, and environmental protection requirements.</li><li>Background displaying ability to staff, organize, lead and manage a diverse work force larger than 5 people, particularly Foreign Nationals (FNs).</li><li>Willingness to travel and work in various locations in the world.</li><li>Willingness to work shifts and extended hours in support of 24/7 operations.</li><li>Willingness to learn about the cultural, economic, geopolitical, and/or military issues of the Middle East and/or Arab-speaking countries within that region desired.</li><li>Ability to exercise discretion and make effective decisions.</li><li>Solid communications skills, strong interpersonal skills.</li><li>Strong ability to work as a member of a diverse, dynamic team.</li><li>Outstanding problem-solving skills and sound judgment.</li><li>Must be capable of obtaining a flight line driver license when required by COR.</li><li>Must be capable of obtaining HAZMAT certifications as required by the PWS and/or host nation.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><br>Country Sales Manager / BDM <br><br>Sector: Drilling, drilling contracting, oil and gas <br><br>Work Location: Muscat, Oman<br><br>Estimated Salary: OMR 1.5K to 3K per month (total cash lump sum package) + Family: medical insurance, annual flights, visa + Bonus (performance based)<br><br><br><br>Role Overview:<br><br>We are seeking an experienced Sales Manager / Business Development Manager to lead the growth and commercial performance of a drilling services business unit based in Muscat, Oman. The successful candidate will be responsible for driving sales, managing key client relationships, overseeing business development activities, and supporting the overall profitability and operational success of the drilling division.<br><br>Required Profile:<br><br><br>Overall 20 years maximum career experience. Anything higher will be deemed too senior for the role's needs.Must have proven experience within the drilling industry, ideally gained through hands-on operational, technical, maintenance, servicing, or commercial roles.<br><br><br><br>Must have progressed in career up to Sales Manager or Account Manager or BDM where the focus and responsibilities shifted to technical sales.<br>Strong understanding of drilling rigs, drilling equipment, drill pipes, and related services.Experience with rig maintenance, inspection, refurbishment, repair, or servicing activities is highly desirable (e.g., CAT III Inspection, CAT IV Refurbishment).Exposure to onshore and/or offshore drilling operations, preferably within the Middle East.Commercially minded with a solid understanding of business performance metrics, cash flow management, and P&amp;L responsibility.Strong client-facing, relationship management, and leadership capabilities.Capable of managing both business development initiatives and day-to-day business operations.<br><br><br> <br><br><br> <br><br> <br><br>Let op: vacaturefraude<br><br>Helaas komt vacaturefraude steeds vaker voor. We waarschuwen je voor mogelijke misleiding:<br>* Wij zullen nooit via WhatsApp of in een videogesprek vragen om jouw persoonlijke gegevens (zoals een kopie van je ID, bankgegevens of BSN).<br>* Twijfel je over de echtheid van een vacature of contactpersoon? Neem dan altijd rechtstreeks contact met ons op via de officiële contactgegevens op onze website.<br> <br>Important: job fraud<br> <br>Unfortunately, job fraud is becoming more common. Beware of such scams:<br>* We will never ask for personal information (such as a copy of your ID, bank details, or social security number) via WhatsApp or during a video call.<br>* If you're unsure whether a vacancy or contact person is legitimate, please reach out to us directly using the official contact details on our website.<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">Sales Manager, Business Development Manager, Drilling equipment, Drilling rig, Maintenance, Refurbishment, Inspection, Cat 3, Cat 4<br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What if you could shape a career as unique as you? </p> <p> At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons.<br> </p> <p> <span>Protection Engineer who will be responsible for managing Protection activities for projects shall undertake the following actions</span> </p> <ul> <li>Bachelor s degree in Engineering or related field.</li> <li>Professional engineering license preferred.</li> <li>In-depth knowledge of electrical systems, codes, and standards.</li> <li> <p>Proven experience in project management and team leadership. <br> </p> <p> <strong>Imagine a better future for you and a better future for us all. </strong> <br> </p> <p>Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? <br> <strong> </strong> </p> <p> <strong>With us, you can. Apply today.</strong> </p> </li> </ul> <ul> <li> <p>Conduct Witness test relay functional test for determining correct operation and sign off the relevant documents. Make appropriate recommendation/resolution for mitigation to Operations, and report to line manager.</p> </li> <li> <p>Perform system studies, provide protection requirements for design, review and sign off one-line, elementary, logic diagrams and work with other discipline engineers - substation engineers, Distribution Field engineers, project engineers, apparatus engineers - to support sub transmission and distribution substation expansion, substation automation and infrastructure replacement projects.</p> </li> <li> <p>Gather and evaluate line data of transmission, sub-transmission, distribution systems, transformer test data, switchgear date, etc. Model systems on appropriate software tool, such as CAPE, perform short circuit studies, and protection coordination studies necessary for completing relay settings, perform relay settings, prepare protection summary, and coordinate relay settings with protection departments. </p> </li> <li> <p>Issue Substation Relays and field Auto recloser settings via relevant relay database to the field, support Test technicians in-servicing or commissioning relay settings, review/approve returned as-left relay setting files, and communicate with Test technicians for making revisions/changes to relay settings as necessary.</p> </li> <li> <p>Drive, Support and Contribute to innovative projects/initiatives such as Protection impact studies due to Distributed Energy Resources (Micro grid, Battery Storage, etc.,), Downed Conductor detection, Arc flash fault duties and Grid Modernization efforts.</p> </li> <li> <p>Ability to analyse information, perform engineering assessments and evaluations and provide reports and recommendations to internal clients and project team members.</p> </li> <li> <p>Experience using application software such as Microsoft Word, Excel, PowerPoint, Access, Visio, and Project.</p> </li> <li> <p>Analyse post-fault event using historical data such as DFR traces, digital relay records, or related data.</p> </li> <li> <p>Support and Reviews advanced power system analyses.</p> </li> <li> <p>Performs field inspections and provides professional field support as necessary during construction phases.</p> </li> <li> <p>Performs investigation of material and system failures</p> </li> <li> <p>On site commissioning, testing and support</p> </li> <li> <p>Other relevant duties assigned by client. </p> </li> </ul></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Responsable du Lot Fonctionnel SI d'un projet Nouvelle Usine MRO F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Vous êtes prêt-e à décoller avec nous ? Rejoignez l'équipe Safran Aircraft Engines : leader mondial dans la conception, la fabrication et la maintenance de moteurs d'avions civils et militaires. Ensemble, nous façonnons un avenir durable pour l'aviation et permettons à nos clients de voler en toute sécurité.<br>Dans un contexte de forte croissance du monde du service dans l'aéronautique et pour faire face à la montée en cadence de l'activité de maintenance et réparation des moteurs au sein de notre entreprise, notre Direction Support &amp; Services a lancé un projet d'implémentation d'une nouvelle usine MRO (Maintenance, Repair and Overhaul).<br>Pour préparer les premières de maintenance de moteur, la définition du besoin fonctionnel pour le système d'information doit être réalisée puis les travaux de réalisation doivent être pilotés en lien avec la DSI. <br>Pour ce faire, votre mission sera de :<br>- Piloter toutes les actions nécessaires au démarrage de l'activité en 2027 puis à la mise en place de la nouvelle usine (horizon 2028). Ce pilotage sera fait en lien avec les équipes du Système d'Information, en respectant les plannings et budget du projet.<br>Cela concerne :<br>o la mise en place des installations techniques (réseau, serveurs, postes de travail, …) en s'appuyant sur l'équipe locale mutualisée<br>o la mise en place des solutions applicatives : corporate Safran (gestion du personnel, gestion achats, …) et spécifiques à un shop MRO (SAP) en interaction avec les acteurs de la DSI.<br>En complément, vous aurez à : <br>- Structurer le lot SI avec ses jalons en cohérence avec les jalons du projet global<br>- Identifier l'ensemble des ressources nécessaires au projet<br>- Apporter tous les éléments Métier d'expression de besoin ou spécifications détaillées nécessaires à ces mises en place<br>- Piloter l'avancement des plannings<br>- Coordonner le travail des équipes concernées (support central et autres, experts fonctionnels SAP, DSI, IT local)<br>- Préparer les travaux nécessaires à la prise en main des installations<br>- Préparer les travaux nécessaires à la prise en main des applications (construction du plan de formation, pilotage du plan de formation,…)<br>- Tenir régulièrement une instance de pilotage du périmètre afin de partager l'avancement, les éventuels points durs et les risques à des fins d'arbitrage, de validation ou de décision<br>- Participer au comité de pilotage du projet global </p><br><br><p>Quelques déplacements sur nos sites en France et à l'étranger seront requis pour une meilleure connaissance des processus métier et besoins fonctionnels inhérents à nos usines MRO + des visites sur site auprès des équipes locales </p><br><br><p>Ingénieur généraliste ou orienté informatique,<br>Compétences : bonnes connaissances IT, maîtrise des méthodologies de gestion de projet, gestion des risques et des points bloquants avec anticipation des impacts, gestion des interdépendances, analyse des besoins métier, compréhension des architectures SI industrielles. <br>Savoir-être : capacité à fédérer des équipes multi métiers et multiculturelles, leadership transverse, Autonomie et prise de décision dans un contexte d'incertitude ou d'ambiguité (nouveau projet, contexte international,…), Bonne communication à l'écrit et l'oral en français et en anglais et écoute active pour désamorcer le cas échéant les tensions avec les parties prenantes. <br>Une connaissance du secteur aéronautique et des spécificités MRO serait un plus. </p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Wheel Loader Operator is responsible for safely and efficiently operating the wheel loader within the shipyard premises to support material handling activities. The primary purpose of the role is to load, unload, transfer, and stack various materials, equipment, and waste items required for shipbuilding, ship repair, and yard operations. The operator handles materials such as scrap metal, steel plates, sand, aggregates, debris, containers, and other heavy items, ensuring proper loading onto trucks, trailers, or designated storage areas. The role also includes transporting materials between work sites, stores, and laydown areas as per operational requirements. The Wheel Loader Operator is responsible for conducting daily equipment inspections, maintaining the machine in good working condition, and reporting any mechanical issues promptly. All activities must be carried out in compliance with ADC s safety regulations, traffic management procedures, and environmental standards to ensure safe and smooth yard operations.</p><p>1- KEY ACCOUNTABILITIES:</p><p>Description</p><p>Day-to-Day Operations</p><ul><li>Follow the daily action plan laid out by the Supervisor in order to ensure Excavation, loading and unloading of earth materials and material segregation in stock yard and other works as required by the section.</li><li>Excavator/ Wheel Loader/ Backhoe loader Operation</li><li>Operate an Wheel Loader, Excavator/ Backhoe loader for excavation operation, loading &amp; unloading operation, stock piling in construction works and coordinate with supervisors in order to carry out safe and accurate excavation operations.</li><li>Transport materials between loading, unloading, processing and storage areas in order to ensure the materials are moved carefully to site location and no damage is caused to it.</li><li>Utilise the standard hand signals for equipment operations in order to signal to others the directions, emergencies and path clearance as per established standards of HSSE/ROP.</li></ul><p>Data Recording</p><ul><li>Handled materials or products, and record weight and other production data on tags or labels to ensure the materials off-loaded are tracked for damages, loss, quantity in order to maintain the quality and quantity of products brought to waste management s system.</li></ul><p>Equipment Maintenance</p><ul><li>Perform routine pre and post inspections on Wheel Loader/ Backhoe loader / Excavator in order to ensure they are operating well and as per established quality, health and safety standards.</li><li>Carry out preventive maintenance of Excavator, Wheel Loader/ Backhoe loader such as lubricating the equipment and report to Supervisor to request for maintenance on the criticality in order to ensure that the equipment is usable and the problem is resolved in minimal amount of time.</li><li>Prepare logbook for routine, preventive, breakdown maintenance of Excavator, Wheel Loader/ Backhoe loader in the industrial facilities in order to facilitate ease of access and reusability when required.</li></ul><p>Policies, Systems, Processes &amp; Procedures</p><ul><li>Follow all relevant Production Support departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.</li></ul><p>Quality, Health, Safety, &amp; Environment</p><ul><li>Adhere to all relevant quality, health, safety and environmental procedures including personal protection requirement such as hard hats, gloves, protective footwear and personal fall arrest equipment, etc., instructions, controls and demonstrate the proper application of tag lines and their importance in safe lifting operations in order to guarantee the safety of employees, quality of products/ services and environmental compliances.</li><li>Review and describe the need for emergency response procedures for various situations such as electrical or mechanical failure, operator retrieval procedures (cab cranes), Incidents etc. in order to ensure continuity of operations in cases of emergencies.</li></ul><p>2. COMMUNICATIONS &amp; WORKING RELATIONSHIPS:</p><p>Internal: Production Division QA/QC HSSE Division</p><p>External: Ship Owner/Suppliers/ Vendors</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School graduate or equivalent</li><li>License from concerned authority to operate forklift in Oman</li><li>2 years of relevant experience in operating a Excavator, Wheel Loader/ Backhoe loader operation in Construction or shipyard facility or similar work</li><li>Understanding of general daily maintenance of the Excavator, Wheel Loader/ Backhoe loader</li><li>Rules &amp; regulations of ROP/SEZAD/Govt. Authorities in Oman</li><li>Good sense of responsibility</li><li>Adherence to safety requirements</li><li>Communication skills</li></ul><p></p></section>

<p><b>Job description</b></p><p>INTERNAL MEDICINE JOB IN OMAN</p><p>Designation: CONSULTANT GENERAL PHYSICIAN</p><p>Qualification: MBBS,MD (OMAN Prometric and OMSB Data Flow Verification)</p><p>Required Experience: Minimum 3 years Experience required</p><p>Gender: Male or Female doctors</p><p><strong>Desired Candidate Profile</strong></p><p>Qualification: MBBS,MD (OMAN Prometric and OMSB Data Flow Verification) Required Experience: Minimum 3 years Experience required Gender: Male or Female doctors</p>

<p><h4>Job Description</h4> <p>The Power Gen Mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with Maintenance Action Sheets, Air Force Technical Orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of Bare Base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including Work Orders, USAF Supply and Amentum forms and update Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs Temporary Duty (TDY) in the Area of Operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense Agencies Contingency Systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred but not required.</li> </ul></p><p></p>

<p><h4>Principal accountabilities</h4> <p>The power gen mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with maintenance action sheets, technical orders, manuals, checklists, regulations, maintenance action sheets and unit type code (UTC) configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with maintenance action sheets, Air Force technical orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of bare base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including work orders, USAF supply and Amentum forms and updates Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs temporary duty (TDY) in the area of operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense agencies contingency systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense agencies contingency systems preferred but not required.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li>Develop, qualify, and approve NDT procedures.</li><li>Establish techniques and ensure compliance with applicable codes and standards (ASME, AWS, ASTM, etc.)</li><li>Procedure demonstration by validating PAUT and TOFD blocks, as per the customer requirements and codes/standards.</li><li>Review Inspection reports and certificates</li><li>Train and supervise Level I and II technicians as per Company written practice</li><li>Ensure personnel understand procedures and techniques thoroughly.</li><li>Maintain and audit quality manuals and NDT documentation.</li><li>Resolve Day to day problems at site in coordination with Cleint.</li><li>Conduct detailed reviews and approvals of inspection data to ensure accuracy and compliance with customer requirements and</li></ul><p>industry standards.</p><br><ul><li>Develop, prepare, and approve procedures for all</li></ul><p>Advanced NDT related services, as per the customer requirements and codes/standards.</p><br><ul><li>Carry out investigation and provide correction / corrective actions for non- conformances/customer complaints.</li><li>Carryout technical audits / witness monitoring.</li></ul><p>Data Interpretation and reporting.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Dear Candidate, Greetings from Smart Resourcing International! We are pleased to inform you of an excellent career opportunity with One of the reputed Hospital, Muscat, Oman, for the position of Manager HR (Talent Acquisition).</p><p><b>Position Details:</b></p><p>Position: Manager HR (Talent Acquisition)</p><p>Location: Muscat, Oman</p><p>Experience Required: 12+ Years</p><p>Age Preference: Up to 45 Years</p><p>Joining: Immediate / Short Notice Preferred</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum 10+ years of HR experience with significant exposure to Talent Acquisition.</li><li>Minimum 5 years of experience in a managerial/leadership role within Talent Acquisition.</li><li>Mandatory healthcare/hospital sector experience, including Hospitals, Healthcare Groups, Medical Centers, or Healthcare Recruitment Organizations.</li><li>Minimum 34 years of hospital sector experience is essential.</li><li>Experience in recruiting Physicians, Specialists, Nurses, Allied Health Professionals, Technicians, and Corporate Staff.</li><li>GCC healthcare recruitment and international sourcing experience will be an added advantage.</li><li>Strong expertise in stakeholder management, workforce planning, recruitment strategy, and talent acquisition leadership.</li></ul><p></p></section>

<p><h4>About the role</h4> <p>At Pavago, one of our clients is hiring a Real Estate Operations Coordinator to support the day-to-day operations of residential and commercial property portfolios.</p> <p>This is a high-ownership operational role focused on:</p> <ul> <li>Tenant communication</li> <li>Leasing coordination</li> <li>Maintenance management</li> <li>Property system updates</li> <li>Owner reporting and compliance</li> </ul> <p>You will act as the operational bridge between:</p> <ul> <li>Tenants</li> <li>Vendors</li> <li>Property owners</li> <li>Internal property management teams</li> </ul> <p>The ideal candidate is highly organized, detail-oriented, and comfortable managing multiple moving parts in a fast-paced property management environment.</p> <p>If you have experience with:</p> <ul> <li>Property management systems</li> <li>Leasing workflows</li> <li>Tenant communication</li> <li>Maintenance coordination</li> </ul> <p>This role is a strong fit.</p> <h4>What you'll own</h4> <h4>Tenant communication & support</h4> <p>Respond to tenant inquiries related to:</p> <ul> <li>Rent payments</li> <li>Lease terms</li> <li>Maintenance requests</li> <li>Property policies</li> </ul> <p>Track all communication within:</p> <ul> <li>Yardi</li> <li>AppFolio</li> <li>Buildium</li> <li>Similar property management platforms</li> </ul> <p>Send reminders for:</p> <ul> <li>Rent due dates</li> <li>Lease renewals</li> <li>Compliance notices</li> </ul> <h4>Leasing & documentation</h4> <p>Draft, review, and process:</p> <ul> <li>Lease agreements</li> <li>Lease renewals</li> <li>Tenant onboarding documentation</li> </ul> <p>Manage documentation using:</p> <ul> <li>DocuSign</li> <li>Dotloop</li> </ul> <p>Maintain organized and compliant tenant files including:</p> <ul> <li>Applications</li> <li>Identification records</li> <li>Inspection reports</li> <li>Signed agreements</li> </ul> <p>Support property marketing across:</p> <ul> <li>Zillow</li> <li>Apartments.com</li> <li>MLS listing platforms</li> </ul> <h4>Property management systems</h4> <p>Maintain accurate records across property management software</p> <p>Track:</p> <ul> <li>Rent collections</li> <li>Delinquencies</li> <li>Occupancy status</li> <li>Late fees</li> </ul> <p>Generate and reconcile:</p> <ul> <li>Rent rolls</li> <li>Delinquency reports</li> <li>Occupancy trackers</li> </ul> <h4>Maintenance coordination</h4> <ul> <li>Create and assign vendor work orders</li> <li>Track maintenance tickets from start to completion</li> <li>Coordinate with tenants and vendors to ensure timely issue resolution</li> <li>Verify vendor invoices against completed work orders</li> </ul> <h4>Owner reporting & operational updates</h4> <p>Prepare:</p> <ul> <li>Owner statements</li> <li>Cash flow summaries</li> <li>Occupancy reports</li> <li>Vacancy updates</li> </ul> <p>Provide regular updates regarding:</p> <ul> <li>Rent collection status</li> <li>Open maintenance issues</li> <li>Leasing activity</li> </ul> <p>Ensure reporting is accurate and delivered on time</p> <h4>Compliance & quality control</h4> <p>Ensure all tenant documentation complies with:</p> <ul> <li>Local landlord-tenant regulations</li> <li>Fair Housing requirements</li> <li>Internal compliance standards</li> </ul> <p>Maintain organized, audit-ready property documentation</p> <h4>What success looks like</h4> <ul> <li>Tenant issues are resolved quickly and professionally</li> <li>Lease documentation remains accurate and compliant</li> <li>Maintenance requests are handled efficiently</li> <li>Property systems stay updated and organized</li> <li>Owners receive timely and accurate reporting</li> </ul> <h4>What makes you a strong fit</h4> <ul> <li>Strong communication skills with tenants, vendors, and property owners</li> <li>Highly organized and comfortable managing multiple workflows simultaneously</li> <li>Detail-oriented with strong operational follow-through</li> <li>Problem-solver who balances tenant experience with operational efficiency</li> <li>Able to work independently in fast-paced environments</li> </ul> <h4>Requirements (must-have)</h4> <h4>Experience</h4> <p>2+ years of experience in:</p> <ul> <li>Property management</li> <li>Leasing coordination</li> <li>Real estate operations</li> <li>Property administration</li> </ul> <h4>Core skills</h4> <p>Hands-on experience with:</p> <ul> <li>Yardi</li> <li>AppFolio</li> <li>Buildium</li> <li>Similar property management systems</li> </ul> <p>Strong Microsoft Office and Google Workspace skills</p> <p>Familiarity with:</p> <ul> <li>Lease documentation</li> <li>Rent collection workflows</li> <li>Tenant communication processes</li> </ul> <p>Strong written and verbal English communication</p> <h4>Nice to have</h4> <ul> <li>Experience managing portfolios of 100+ units</li> <li>Multi-state property management experience</li> <li>Familiarity with:</li> <ul> <li>Security deposits</li> <li>Trust accounting</li> <li>Owner statements</li> <li>Property accounting workflows</li> </ul> <li>Experience in:</li> <ul> <li>Residential property management</li> <li>Commercial real estate</li> <li>Mixed-use portfolios</li> </ul> </ul> <h4>What a typical day looks like</h4> <ul> <li>Respond to tenant inquiries and maintenance requests</li> <li>Process leases, renewals, and tenant documentation</li> <li>Update rent payments and occupancy records in property systems</li> <li>Coordinate vendor work orders and maintenance follow-ups</li> <li>Prepare owner reports and operational summaries</li> <li>Ensure all records remain organized and compliant</li> </ul> <p>In short: You keep property operations organized, responsive, compliant, and running efficiently across tenants, vendors, and ownership groups.</p> <h4>Key metrics (KPIs)</h4> <ul> <li>Rent collection percentage</li> <li>Vacancy fill time</li> <li>Maintenance resolution turnaround time</li> <li>Accuracy of lease and tenant documentation</li> <li>Owner satisfaction with communication and reporting</li> <li>System and operational accuracy</li> </ul> <h4>Why this role stands out</h4> <ul> <li>High operational ownership across property workflows</li> <li>Direct impact on tenant experience and portfolio performance</li> <li>Exposure to leasing, maintenance, reporting, and compliance operations</li> <li>Opportunity to grow into:</li> <ul> <li>Property manager</li> <li>Operations manager</li> <li>Portfolio coordinator roles</li> </ul> </ul> <h4>Interview process</h4> <ul> <li>Initial phone screen</li> <li>Video interview with Pavago recruiter</li> <li>Practical task (lease processing or owner reporting scenario)</li> <li>Client interview</li> <li>Offer & background verification</li> </ul> <h4>Apply now</h4> <p>If you:</p> <ul> <li>Thrive in organized, operations-heavy environments</li> <li>Enjoy coordinating property workflows and tenant communication</li> <li>Can manage multiple moving parts without losing accuracy</li> <li>Want to grow within real estate and property operations</li> </ul> <p>This is a strong opportunity to join a fast-moving property management environment and play a key role in daily portfolio operations.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b>Job Description </b><div> <p> <strong>MANAGERIAL RESPONSIBILITIES</strong> </p> <ul> <li>Drive seamless communication between the senior leadership and the team members to ensure smooth flow of information and timely decision making</li> <li>Manage and execute and manages the delivery of technical excellence within Utilities Technology, and liaises with relevant area managers to develop and strengthen assurance processes to ensure uninterrupted plant operation</li> <li>Conduct regular check ins with team members for alignment on expectations, assessing performance against set goals, and provide feedback for continuous improvement</li> <li>Guide and support team members on all operational and functional matters and resolve any doubts/concerns/grievances they have</li> <li>Devote time to train team members on new ways of working, developing new competencies, and upskilling to drive performance and productivity</li> </ul> <p> <strong>FUNCTIONAL RESPONSIBILITIES</strong> </p> <p> <strong>Utilities Technology Strategic Planning:</strong> </p> <ul> <li>Assist in development and implementation of the long-term strategic plan for the utility technology activities in the Asset Reference Plan, and ensure alignment with production, maintenance, and projects for delivery</li> <li>Advise on technological services to meet Oman LNG business principles and objectives, including safeguarding performance, monitoring, testing and process optimizations by leveraging technical expertise in the field</li> <li>Ensure Utilities Technology performance meets departmental and corporate objectives by performing test runs to determine operating boundaries and changes in feed gas quality</li> </ul> <p> <strong>Utilities Technology Operations:</strong> </p> <ul> <li>Lead execution of detailed definition and design work for required plant changes/ improvements through the Management of Change (MOC) process</li> <li>Propose, lead, and execute development studies and projects related to plant performance, process safety and plant integrity improvements</li> <li>Apply barrier thinking to risk-based assessments to ensure plant safety and integrity (incident investigations, Management of Change, Besafe closure)</li> <li>Lead technical support to Operations and Engineering as required, e. g. in troubleshooting and problem analysis</li> <li>Lead and/or participate in utilities technological HSE services in the form of Process Safety Assessment (PSA), HAZOPs, Bow-ties and LOPA analysis</li> <li>Ensure logging, tracking, and closeout of any actions generated from the reviews</li> <li>Perform test runs, develop monitoring tools and procedures, to determine the operating boundaries to assist in achieving higher reliability and availability of equipment using process engineering expertise and technical know-how</li> <li>Promote technical integrity of process design to required technical standards (e. g. legal requirements DEPs and SIOP standards) and apply design strategy aiming for minimum life cycle cost in the defined scope area</li> <li>Interact with laboratory to ensure methods, limits and sample schedule provide the correct feedback for supporting production, engineering, and various process test-runs</li> </ul> <p> <strong>Quality Assurance:</strong> </p> <ul> <li>Execute discipline engineering assurance functions and assist in providing in-depth specialist technical know-how to support other departments to sustain continuous and uninterrupted plant operation, leading to achievement of overall corporate objectives</li> <li>Ensure technical quality of all activities within utilities technology</li> <li>Develop and maintain assurance functions within procedures, organisational structure, other business units, staff, and the corporate functions to ensure risk profile in relevant business scope is identified, monitored, and controlled</li> <li>Ensure compliance of the relevant discipline to the HSSE and regulatory framework, and provide leadership support to achieve goal zero for OLNG</li> </ul> <p> <strong>Utilities Technology Continuous improvement:</strong> </p> <ul> <li>Identify and implement opportunities to enhance efficiency of the production units to maximize the LNG production capability</li> <li>Develop tools &amp; keep abreast of new technologies and drive case for change that will improve train/complex reliability, efficiency, production, and environmental performance</li> <li>Ensure state-of-the-art methods and tools are available for the Utilities Technology section by liaising with external consultants and vendors</li> </ul> <p> <strong>Stakeholder</strong> <strong> </strong> <strong>Management:</strong> </p> <ul> <li>Build and nurture a close working relationship with technical advisor through networking and execution of studies and projects</li> <li>Build and optimize effective liaison with process technology, environmental technology, information technology, operations, and engineering departments</li> <li>Interact with laboratory to ensure methods, limits and sample schedule provide the correct feedback for supporting production, engineering and various process test-runs</li> <li>Act as the focal point for external vendors and Shell global solutions to execute projects on the site with responsibilities ranging from Terms of Reference (ToR) preparation to cost/schedule control</li> </ul> <p> <strong>Miscellaneous</strong> <strong> </strong> <strong>Tasks:</strong> </p> <ul> <li>Prepare reports on plant reliability, utility, availability, plant thermal efficiency and production to the shareholders in conjunction with reliability team</li> <li>Act as shutdown coordinator from technology department</li> <li>Provide advanced utilities technology familiarization and training for other OLNG staff</li></ul></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Qualifications </p><div> <ul> <li>University Graduate in relevant streams like Chemical, Process engineering or Physics</li> <li>TA 3 for UTL engineering</li> </ul> <p> <strong>Experience</strong> </p> <ul> <li>8 years of experience in hydrocarbon industry, including design/operations support</li> <li>5 years in LNG technical engineering field</li></ul></div><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Head of Zone Dhofar 2 Job Content: Responsible for the safety, security, reliability and effective operation and maintenance of the Transmission system of his specific zone. Ensure implementation and adherence to the Quality Health , Safety and Environment rules and requirements. Description: Ensure compliance to the Transmission and Dispatch License and Grid code in all Transmission functions for Dhofar Governorate. Ensure implementation and adherence to the Quality, Health, Safety and Environment regulations and requirements in his specific zone. Ensure implementation and adherence of OETC System Safety Rules in his specific Zone Assists the Regional Manager / General Manager - Transmission in investigation and development of new Transmission investments and agreements; pertaining to the demand growth that increase revenues and provide access to new energy markets Support other OETC departments in the collection and reporting of System Operations performance and status data related to his zone. Ensure continuous availability of the system, safe operations, timely maintenance, and quick restoration of any outages for his specific Zone. . Ensure availability of strategic spare parts and other parts for Transmission network Asset related to his specific Zone. Supervising the Grid Stations and Transmission Over Headlines Maintenance Contract in his specific Zone Supervising the Grid Stations Ancillary Services Maintenance Contract in his specific Zone. Supervising all Transmission contract in his specific zone. Update All Asset information related to his specific zone Responsible for defect reporting and management in his specific zone Responsible for project progress reporting and management in his specific zone Supervise and couching OETC staff in his specific zone Doing all operation activities in his specific zone as and when it is required Doing all maintenance activities in his specific zone as and when it is required Doing all other work assign from time to time by Transmission Regional Manager/ General Manager Knowledge and Understanding of the Asset Management, QHSE Management System and IT Security Standard Requirements according to ISO55001, ISO 14001, OHSAS 18001 and ISO 27001 to carry out the assigned duties as per the roles and responsibilities matrix.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Qualifications: Bachelor s degree in electrical engineering, Electrical Power Engineering and/or equivalent.</li><li>Professional Experience: Minimum of 7 years experience in handling the transmission function, Operation, Maintenance and Health Safety &amp; Environment during external quality audits.</li></ul><p></p></section>

<p>Are you an experienced Specialist Anesthesiologist seeking a high-impact medical career in the Middle East? Khoula Hospital, the premier national tertiary referral and apex trauma center under the Ministry of Health (MOH) in Muscat, Oman, is recruiting a qualified Specialist in Anesthesiology.</p><p>Job Location Muscat, Oman</p><p>Salary, Remuneration &amp; Benefits</p><ul><li>Competitive Tax-Free Salary: OMR 2,100 to OMR 2,200 per month (commensurate with qualifications and experience).</li><li>Housing allowance.</li><li>Medical Insurance.</li><li>Paid annual leave.</li><li>Other benefits as per Oman Labor Law.</li></ul><p>Required Qualifications &amp; Eligibility Criteria</p><p>To meet Oman Medical Specialty Board (OMSB) and Ministry of Health (MOH) licensing requirements, candidates must possess:</p><ul><li>Basic Medical Degree: MBBS or equivalent medical qualification recognized by the OMSB.</li><li>Postgraduate Specialization: MD / MS / DNB in Anesthesiology.</li><li>Clinical Experience: Minimum 3 to 5 years of post-specialization clinical experience in anesthesiology within a high-volume secondary or tertiary care hospital.</li></ul><p>Core Competencies &amp; Technical Skills</p><ul><li>Demonstrate excellent proficiency in the field.</li><li>Advanced clinical decision-making and crisis resource management under high-pressure, time-sensitive operating conditions.</li><li>Professional fluency in English.</li><li>Strong collaborative spirit within a high-volume, multi-disciplinary surgical team.</li></ul><p>Qualified medical candidates interested in this Anesthesiologist vacancy in Oman are invited to submit their updated CV.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Basic Medical Degree: MBBS or equivalent medical qualification recognized by the OMSB.</li><li>Postgraduate Specialization: MD / MS / DNB in Anesthesiology.</li><li>Clinical Experience: Minimum 3 to 5 years of post-specialization clinical experience in anesthesiology within a high-volume secondary or tertiary care hospital.</li><li>Demonstrate excellent proficiency in the field.</li><li>Advanced clinical decision-making and crisis resource management under high-pressure, time-sensitive operating conditions.</li><li>Professional fluency in English.</li><li>Strong collaborative spirit within a high-volume, multi-disciplinary surgical team.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>What if you could shape a career as unique as you? At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons.</p><p>Project Engineer who will be responsible for managing SCADA activities for projects shall undertake the following actions:</p><p>Supervision the delivery and implementation of NEDC s SCADA system in accordance with the Company s license conditions . Adhere to the Company s health, safety, environmental and security policies at all times and immediately report violations of these policies to NEDC s health, safety &amp; environment representatives Oversee the design and implementation of the Company s SCADA s system project. Develop and implement the transition strategy of the new SCADA system to operations Ensure that correct and accurate policies and procedures are in place for the new SCADA system Trouble shoots complete SCADA System and Maintain all SCADA components. Recommends updates to the SCADA system, as required Configure RTU s, communication modems and other SCADA devices End-To-End testing procedures review, approval, inspections and testing supervision. Supervise technical staff as required Review and approval of Operation and Maintenance (O&amp;M) Manuals. Oversee the development, management and implementation of annual work programs and budgets for implementation of the new SCADA system consistent with the NEDC s business strategy and business planning process Develop, implement and report against staff training programs to improve technical and management skills Other duties, as assigned by client.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in electrical engineering or related field. Professional engineering license preferred. In-depth knowledge of electrical systems, codes, and standards. Proven experience in project management and team leadership.</p><p></p></section>