Air Conditioning Technician Jobs

<p>General Purpose Lead and manage the end-to-end operations of Atyab Group s feed manufacturing plant producing animal feed and aqua (fish) feed, through: (1) directing safe, efficient and cost-effective production from raw-material intake through grinding, mixing, conditioning, extrusion, pelleting, drying, cooling, coating and packaging so that volume, yield, quality and cost targets are met; (2) safeguarding product quality and feed safety across both animal-feed and aquafeed lines, ensuring compliance with HACCP, GMP, food-safety, HSE and applicable regulatory standards; (3) leading the plant team, sustaining equipment reliability and driving continuous improvement protecting operational continuity, product integrity and the Group s cost, service and growth commitments. Main Accountabilities Production &amp; Operations Management Direct daily operations across animal-feed and aquafeed lines receiving and grinding, batching and mixing, conditioning, extrusion and pelleting, drying, cooling, coating and packaging to meet the production plan and quality targets. Manage production scheduling, line changeovers and capacity utilisation to fulfil demand while minimising downtime, waste and cross-contamination between species-specific and medicated formulations. Monitor critical process parameters moisture, extrusion temperature and pressure, pellet durability, water stability, particle size and dosing accuracy and take corrective action to keep output within specification. Optimise throughput, energy and raw-material yield to achieve cost, efficiency and productivity KPIs without compromising product quality. Quality, Feed Safety &amp; Compliance Ensure all finished animal and fish feed meets nutritional, physical-quality and customer requirements, working closely with Quality Assurance and formulation teams. Implement and maintain feed-safety and quality management systems (HACCP, GMP/GMP+, ISO/FSMS as applicable), including hygiene, biosecurity, traceability, sampling and recall readiness. Enforce controls that prevent cross-contamination, carry-over and mislabelling between feed types, and ensure medicated-feed handling follows approved procedures. Support internal and external audits and regulatory inspections, and close out non-conformances through effective corrective and preventive actions. Maintenance, Engineering &amp; Asset Reliability Ensure plant, machinery and utilities extruders, pellet mills, mixers, dryers, coolers, boilers, and dust and fire-safety systems remain maintained and fully operational. Establish and oversee preventive and predictive maintenance programmes to maximise equipment availability and minimise unplanned breakdowns. Plan and manage capital projects, equipment upgrades and spare-parts strategy in coordination with Engineering and Procurement. Planning, Cost, Inventory &amp; Reporting Plan raw-material, additive and packaging requirements with Supply Chain and Procurement to ensure production continuity and optimal stock levels. Manage plant budgets, control operating and conversion costs, and identify and deliver cost-saving and efficiency opportunities. Establish plant KPIs and prepare regular reports on production, yield, quality, downtime, HSE and cost performance for management. People Leadership, HSE &amp; Continuous Improvement Lead, supervise and develop plant supervisors, operators and support staff; set objectives, manage performance and build a skilled, motivated workforce. Champion a strong HSE and food-safety culture ensuring inductions, training, PPE, safe work practices, permits and emergency preparedness across the plant. Drive continuous-improvement and lean initiatives to raise productivity, quality, reliability and cost performance. Coordinate with Operations, Supply Chain, Quality, HSE, Finance, HR and Sales on all plant-related matters, and support management with operational analysis and recommendations. Undertake any other related duties, projects or responsibilities that may be assigned from time to time by the VP Operations or management, in line with the role and the evolving needs of the business.</p><p><strong>Desired Candidate Profile</strong></p><b>Educational Requirements</b><p>Bachelor s degree in Feed / Milling Technology, Food Science, Animal Science or Nutrition, Chemical / Mechanical / Production Engineering, Operations Management or a related discipline.</p><p>Professional certification in feed manufacturing, food safety (HACCP / GMP+), production or operational excellence preferred.</p><b>Experience</b><p>10+ years of experience in feed, food or process manufacturing operations, including 3+ years in a plant / production management or senior supervisory role.</p><p>Proven experience running an animal-feed, aqua feed, milling or food-processing facility ideally involving extrusion and / or pelleting of animal and fish feed.</p><p>Experience leading production, quality, maintenance and HSE functions within an integrated plant environment, across batch and continuous processes.</p><p>Track record in cost control, KPI management, capital projects and continuous improvement.</p><b>Know-How</b><p>Feed and aqua feed manufacturing processes grinding, mixing, conditioning, extrusion, pelleting, drying, cooling, coating and packaging.</p><p>Product-quality parameters pellet durability, water stability, buoyancy, moisture, particle size and dosing accuracy for animal and fish feed.</p><p>Feed-safety and quality systems HACCP, GMP / GMP+, ISO / FSMS, biosecurity, traceability and recall management.</p><p>Plant maintenance, utilities and equipment reliability, including preventive and predictive maintenance.</p><p>Production planning, inventory, budgeting and conversion-cost control.</p><p>HSE and food-safety regulations, and Oman labour and regulatory compliance requirements.</p><p>KPI development, root-cause analysis and continuous-improvement / lean methodologies.</p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced Telecom Lead Engineer to lead and manage telecommunications activities during the pre-commissioning and commissioning phases of a large-scale industrial facility. The role will involve overseeing telecom systems installation completion, testing, integration, and handover to operations, ensuring full compliance with project specifications, international standards, and safety requirements.</p> <p>The successful candidate will act as the technical authority for telecom discipline activities on site, coordinating closely with engineering, construction, commissioning, vendors, and operations teams.</p> <h4>Key responsibilities</h4> <strong>Engineering & technical leadership</strong><br> <ul> <li>Lead all telecommunications scope during pre-commissioning and commissioning phases</li> <li>Review and validate telecom engineering deliverables, including: <ul> <li>Network architecture and system layouts</li> <li>Telecom block diagrams and schematics</li> <li>Fiber optic, structured cabling, and routing drawings</li> </ul> </li> <li>Ensure systems are installed, tested, and commissioned in line with: <ul> <li>Project specifications</li> <li>Approved drawings and procedures</li> <li>Applicable international standards (IEC, ITU-T, ISO, IEEE)</li> </ul> </li> </ul> <strong>Systems scope</strong><br> <p>Responsible for the following systems, including integration and interface management:</p> <ul> <li>Telecom network infrastructure (LAN/WAN, IP/MPLS where applicable)</li> <li>Fiber optic and copper cabling systems</li> <li>Telephone systems (PABX/IP telephony)</li> <li>CCTV and video surveillance systems</li> <li>Access control and security systems</li> <li>Public address & general alarm (PAGA) systems</li> <li>Radio systems (TETRA/UHF/VHF, where applicable)</li> <li>Data and server room equipment (racks, switches, UPS interfaces)</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Develop and review: <ul> <li>Pre-commissioning check sheets</li> <li>Commissioning procedures and test scripts</li> </ul> </li> <li>Lead telecom system testing activities such as: <ul> <li>Point-to-point testing</li> <li>Loop checks</li> <li>Network performance and redundancy tests</li> <li>System integration tests</li> </ul> </li> <li>Coordinate vendor attendance and factory acceptance/site acceptance testing (FAT/SAT) support</li> <li>Monitor commissioning progress and proactively resolve technical issues</li> </ul> <strong>Site coordination & management</strong><br> <ul> <li>Act as single point of contact for telecom discipline on site</li> <li>Coordinate daily activities with: <ul> <li>Construction teams</li> <li>Commissioning teams</li> <li>Other engineering disciplines</li> <li>Client/operations representatives</li> </ul> </li> <li>Manage and support telecom engineers and technicians on site</li> <li>Participate in site walkdowns, punch listing, and system handover activities</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure compliance with: <ul> <li>Project HSE requirements</li> <li>Company quality standards</li> <li>Telecommunications industry best practices</li> </ul> </li> <li>Support preparation of telecom dossiers, test records, and handover documentation</li> <li>Close out punch items and support final system acceptance</li> </ul> <strong>Interface & reporting</strong><br> <ul> <li>Report to the Commissioning Manager/Engineering Manager</li> <li>Interface closely with: <ul> <li>Electrical, Instrumentation, and Automation teams</li> <li>IT/cybersecurity stakeholders (if applicable)</li> <li>Vendors and system integrators</li> </ul> </li> </ul> <h4>Requirements</h4> <ul> <li>Bachelor’s degree in: <ul> <li>Telecommunications Engineering</li> <li>Electrical/Electronics Engineering</li> <li>Or related discipline</li> </ul> </li> <li>Relevant professional certifications (but not mandatory)</li> <li>Minimum 10-15 years of experience in telecommunications engineering</li> <li>Proven experience as Telecom Lead Engineer on large industrial projects, preferably: <ul> <li>Oil & Gas</li> <li>LNG</li> <li>Petrochemical</li> <li>Power or heavy industrial facilities</li> </ul> </li> <li>Strong hands-on experience in pre-commissioning and commissioning phases</li> <li>Prior site-based project experience in the Middle East is highly desirable</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced Telecom Lead Engineer to lead and manage telecommunications activities during the pre-commissioning and commissioning phases of a large-scale industrial facility. The role will involve overseeing telecom systems installation completion, testing, integration, and handover to operations, ensuring full compliance with project specifications, international standards, and safety requirements.</p> <p>The successful candidate will act as the technical authority for telecom discipline activities on site, coordinating closely with engineering, construction, commissioning, vendors, and operations teams.</p> <h4>Key responsibilities</h4> <strong>Engineering & technical leadership</strong><br> <ul> <li>Lead all telecommunications scope during pre-commissioning and commissioning phases</li> <li>Review and validate telecom engineering deliverables, including: <ul> <li>Network architecture and system layouts</li> <li>Telecom block diagrams and schematics</li> <li>Fiber optic, structured cabling, and routing drawings</li> </ul> </li> <li>Ensure systems are installed, tested, and commissioned in line with: <ul> <li>Project specifications</li> <li>Approved drawings and procedures</li> <li>Applicable international standards (IEC, ITU-T, ISO, IEEE)</li> </ul> </li> </ul> <strong>Systems scope</strong><br> <p>Responsible for the following systems, including integration and interface management:</p> <ul> <li>Telecom network infrastructure (LAN/WAN, IP/MPLS where applicable)</li> <li>Fiber optic and copper cabling systems</li> <li>Telephone systems (PABX/IP telephony)</li> <li>CCTV and video surveillance systems</li> <li>Access control and security systems</li> <li>Public address & general alarm (PAGA) systems</li> <li>Radio systems (TETRA/UHF/VHF, where applicable)</li> <li>Data and server room equipment (racks, switches, UPS interfaces)</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Develop and review: <ul> <li>Pre-commissioning check sheets</li> <li>Commissioning procedures and test scripts</li> </ul> </li> <li>Lead telecom system testing activities such as: <ul> <li>Point-to-point testing</li> <li>Loop checks</li> <li>Network performance and redundancy tests</li> <li>System integration tests</li> </ul> </li> <li>Coordinate vendor attendance and factory acceptance/site acceptance testing (FAT/SAT) support</li> <li>Monitor commissioning progress and proactively resolve technical issues</li> </ul> <strong>Site coordination & management</strong><br> <ul> <li>Act as single point of contact for telecom discipline on site</li> <li>Coordinate daily activities with: <ul> <li>Construction teams</li> <li>Commissioning teams</li> <li>Other engineering disciplines</li> <li>Client/operations representatives</li> </ul> </li> <li>Manage and support telecom engineers and technicians on site</li> <li>Participate in site walkdowns, punch listing, and system handover activities</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure compliance with: <ul> <li>Project HSE requirements</li> <li>Company quality standards</li> <li>Telecommunications industry best practices</li> </ul> </li> <li>Support preparation of telecom dossiers, test records, and handover documentation</li> <li>Close out punch items and support final system acceptance</li> </ul> <strong>Interface & reporting</strong><br> <ul> <li>Report to the Commissioning Manager/Engineering Manager</li> <li>Interface closely with: <ul> <li>Electrical, Instrumentation, and Automation teams</li> <li>IT/cybersecurity stakeholders (if applicable)</li> <li>Vendors and system integrators</li> </ul> </li> </ul> <h4>Requirements</h4> <ul> <li>Bachelor’s degree in: <ul> <li>Telecommunications Engineering</li> <li>Electrical/Electronics Engineering</li> <li>Or related discipline</li> </ul> </li> <li>Relevant professional certifications (but not mandatory)</li> <li>Minimum 10-15 years of experience in telecommunications engineering</li> <li>Proven experience as Telecom Lead Engineer on large industrial projects, preferably: <ul> <li>Oil & Gas</li> <li>LNG</li> <li>Petrochemical</li> <li>Power or heavy industrial facilities</li> </ul> </li> <li>Strong hands-on experience in pre-commissioning and commissioning phases</li> <li>Prior site-based project experience in the Middle East is highly desirable</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p>Diagnose and troubleshoot hydraulic and mechanical systems in heavy commercial vehicles. Perform installation, servicing, maintenance, repair, and commissioning of hydraulic equipment. Inspect hydraulic pumps, motors, cylinders, valves, hoses, fittings, and hydraulic circuits. Identify hydraulic leakage, pressure, flow, overheating, and performance-related issues. Read and interpret hydraulic circuit diagrams, mechanical drawings, and technical manuals. Conduct preventive and breakdown maintenance of heavy vehicles and hydraulic systems. Perform hydraulic pressure and functional testing after repairs. Troubleshoot vehicle systems including hydraulic, mechanical, pneumatic, and related components. Attend customer/field service complaints and provide timely technical solutions. Coordinate with customers, workshops, technicians, and internal engineering teams. Maintain service reports, inspection reports, repair records, and maintenance documentation. Ensure compliance with safety procedures and manufacturer/service standards. Provide technical guidance and support to technicians and service teams.</p><p><strong>Desired Candidate Profile</strong></p><p>6-10 years + Diploma Mechanical + Heavy Commercial Vehicles + Hydraulics .</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Department of Business and Economics at MCBS invites applications for a full-time faculty position in Aviation Management within the transportation, logistics, and safety management area. The successful candidate will teach aviation-related courses, contribute to academic development and research, advise students, and support quality assurance and accreditation activities.</p> <p> </p> <p> <strong>Core teaching areas may include:</strong> </p> <p>Aviation Management; Airline Management; Air Operations Management; Aviation Safety; Aviation Law; Air Traffic Management; Air Cargo Management; Accident Prevention and Causation; Meteorology for Aviation; Aviation Strategy and Regulation.</p> <p> </p> <p> <strong>Key responsibilities:</strong> </p> <p> Teach undergraduate aviation management courses in face-to-face, online, and blended modes.</p> <p> Develop and maintain syllabi, aviation case studies, learning resources, assessments, rubrics, course files, and practical learning activities.</p> <p> Integrate aviation industry standards, safety culture, airline operations, regulation, and Oman/GCC aviation examples into teaching.</p> <p> Conduct research and publish in peer-reviewed journals; contribute to aviation, transport, logistics, safety, and management-related scholarship.</p> <p> Advise students, supervise projects/capstones, support internships, and engage with aviation industry stakeholders.</p> <p> Participate in curriculum review, Assurance of Learning, moderation, accreditation evidence preparation, academic committees, and continuous improvement.</p> <p> </p> <p> <strong>Required qualifications:</strong> </p> <p> Assistant/Associate Professor: PhD/DBA in Aviation Management, Airline Management, Transportation Management, Logistics, Safety Management, Business Administration with aviation focus, or a closely related field from a recognized university.</p> <p> Associate Professor candidates should demonstrate peer-reviewed publications, academic leadership, supervision experience, and service.</p> <p> Evidence of teaching effectiveness and ability to teach online/hybrid courses using appropriate educational technologies.</p> <p> Bilingual Arabic-English communication is preferred; ability to teach in Arabic is an advantage where program needs require it.</p> <p> Experience with quality assurance, AACSB/OAAAQA/OQF-aligned assessment, CLO/PLO mapping, moderation, and accreditation documentation is strongly preferred.</p> <p> </p> <p> <strong>Preferred qualifications and experience:</strong> </p> <p> Industry experience with airlines, aviation safety, air operations, air traffic, logistics, or regulatory bodies.</p> <p> Professional certifications or training related to aviation, safety, transport, or logistics.</p> <p> Ability to support industry engagement, student internships, applied projects, and aviation-sector partnerships.</p> <p> </p> <p> <strong>AACSB-aligned contribution expected:</strong> </p> <p> Maintain academic/professional currency appropriate to the appointed rank and faculty qualification category.</p> <p> Contribute to faculty sufficiency, teaching effectiveness, Assurance of Learning, curriculum improvement, research impact, and engagement with professional/community stakeholders.</p> <p> Provide evidence for course files, assessment moderation, closing-the-loop actions, and accreditation-related reporting when required.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>JOB PURPOSE: To carry out all electrical &amp; mechanical maintenance management for switchgears, LV (Low Voltage) and HV (High Voltage) motors, generators (Electric Overhead Travel)/ Jib/Tower cranes and other heavy equipment s and machinery equipment s in order to ensure that all equipment s in the shipyard electrical network system are running efficiently and the work is of high quality.</p><p>KEY ACCOUNTABILITIES:</p><p>Description Maintenance Major activities</p><ul><li>Carry out periodical follow up of general inspections for all crane spots as well as machinery equipment s in all critical locations and provide non-compliance and action reports to take timely actions and keep the Senior Manager aware of all the challenges, issues and progress of activities</li><li>Support Crane Technicians &amp; foreman to carry out repair maintenance and fault findings and guide them to facilitate learning and development of the team</li><li>To Planning &amp; Executing general/routine/preventive/breakdown maintenance and repairs for crane equipment s</li><li>To prepare KPI for maintenance section</li><li>To Carry out &amp; diagnose the problems in PLC and VFD systems for all the cranes</li><li>Doing the programming of PLC systems (Siemens, ABB, Allen Bradley etc.) whenever required</li><li>Maintain the checklists and records for routine, preventive, breakdown maintenance of all crane equipment s</li><li>To monitor the daily crane maintenance activities</li><li>To plan &amp; Executing of the third part inspection &amp; load test of the crane and heavy equipment s</li><li>To plan &amp; Executing of the lifting tools inspection &amp; load test</li><li>To prepare POR for cranes spare parts and follow-up with C&amp; P</li><li>To follow up the stock inventory</li><li>All the maintenance section POR is updating and follow-up with C&amp; P</li><li>To assist maintenance section budget preparation and cost control study</li><li>To follow up the TPM activities</li><li>To follow-up &amp; assist to rectify the Electrical and electronics, PLC, drives problems in all the cranes (jib cranes, Shop cranes), Heavy lifting equipment s (cherry pickers, forklifts, Crawler cranes, mobile cranes &amp; generators, etc.)</li><li>To follow-up &amp; assist to rectify the electrical &amp; PLC, drives problems in machinery equipment s (CNC Machines, CNC cutting machines, bending machine, CNC pipe coaster, CNC milling machines &amp; etc.)</li><li>To follow up &amp; assist to rectify the electrical &amp; PLC, drives problems in Environment s Plants</li><li>Tender documents preparation for new equipment s</li><li>To prepare documents for ISO and OHSAS and internal Audit</li></ul><p>Technical Inputs</p><ul><li>Inspect the electrical repair items on a regular basis, take measurements, make sketches and generally monitor the progress of the activities and assist the team by providing technical inputs on the processes and methods to ensure the interpretation and execution work is simplified for everyone involved</li></ul><p>Evaluations</p><ul><li>Evaluate work specifications; prepare information, person-hours, materials, direct purchases in coordination with the Production and Budget Control teams to ensure the repair work proceeds as per timelines and cost schedules</li></ul><p>Test and Trials</p><ul><li>Carry our test and trials of repaired electrical items to ensure the repairs conducted is proper and the items are functional</li></ul><p>Material Requirements and Use</p><ul><li>Coordinate with internal departments as well as material suppliers/vendors when required by the Production Sections to ensure that material requirements are provided timely and accurately to complete job requirements</li></ul><p>Preparing Reports</p><ul><li>Prepare technical reports and record operational data on critical inspection and monitoring on machines and equipment used, type and quality of materials, etc. to ensure accurate and up to date information is input into the logbook</li></ul><p>Policies, Systems, Processes &amp; Procedures</p><ul><li>Follow all relevant Production Support departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner</li></ul><p>Quality, Health, Safety, &amp; Environment</p><ul><li>Adhere to all relevant quality, health, safety and environmental procedures, instructions and controls to guarantee the safety of employees, quality of products/ services and environmental compliance can be guaranteed</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><b>Minimum Qualifications:</b> Bachelor's degree in electrical / mechanical engineering or equivalent</li><li><b>Minimum Experience:</b> 10 years of relevant experience in Jib cranes and switchgears, heavy lifting equipment, generators, CNC Machines and PLC, drives and other workshop facilities in shipyard or heavy industries</li><li><b>Skills</b><ul><li>Understanding of all electrical drawings, process and sequence drawing</li><li>Skills to replace/repair/overhaul major electrical equipment s such as Switchgears, Generators, Motors, Different Cranes, Machine tools, and control circuitry</li><li>Ability to interpret mechanical/electrical and electronic diagrams</li><li>Exposure to ISO 9001:2015 standards</li><li>Communication and interpersonal skills</li><li>Analytical thinking skills</li><li>Technical drawing skills</li></ul></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Architecte Système Missile Senior avant-projet F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Au sein de l'équipe Architecture Systèmes de Guidage, composée de 10 ingénieurs, vous serez au cœur de la conception et de l'ingénierie de nos missiles Air-Sol révolutionnaires. Travaillant plus particulièrement sur les avant-projets, vos missions seront de :<br>• Proposer et définir les premières architectures cible de nos futures évolutions <br>• Animer une équipe multidisciplinaire et collaborer étroitement avec nos partenaires, y compris les avionneurs et les fournisseurs de sous-ensembles<br>• Proposer les axes d'amélioration des performances et d'innovation de nos produits<br>• Capitaliser les études réalisées dans le cadre de ces projets amont. <br>Complément du descriptif : <br>Pour en savoir plus sur nos activités : https://www.safran-group.com/fr/produits-services/aasm-hammertm-armement-air-sol-modulaire-haute-precision </p><br><br><p>Vous avez l'habitude de travailler dans un contexte d'équipes pluridisciplinaires sur un projet complexe dans lequel votre leadership et vos capacités de coordination et de synthèse seront un réel atout.<br>Ce poste offre de belles perspectives d'évolution, que ce soit dans le pilotage de projets ou l'expertise technique. Vous serez intégré(e) dans une équipe dynamique où l'innovation et l'excellence sont au cœur de nos valeurs.<br>Pour en savoir plus sur nos activités, consultez notre site web : https://www.safran-group.com/fr/produits-services/aasm-hammertm-armement-air-sol-modulaire-haute-precision<br>Rejoignez-nous dès maintenant et participez à façonner l'avenir de l'aéronautique militaire avec Safran !</p><br><br><p>Titulaire d'un Bac +5, vous avez au moins 10 ans d'expérience dans la conception de systèmes complexes, idéalement dans le domaine de l'aéronautique militaire. <br>Vous avez des connaissances dans un ou plusieurs des domaines suivants : architecture système ou fonctionnelle, guidage et pilotage, navigation, optronique, radar et liaisons de données.<br>Vos atouts majeurs incluent :<br>• Capacité à travailler efficacement au sein d'équipes pluridisciplinaires sur des projets complexes<br>• Leadership, capacité de coordination et esprit de synthèse<br>• Passion pour l'innovation et désir de relever des défis techniques</p><br><br><br> </div>

<p>Muscat Oman Posted 2 hours ago Active Consolidated Shipping Services Group Key Responsibilities Drive business development and ensure volume with revenue growth. Expand the current books of business and increase support from the existing customers. Generate the brand image and value of CSS and offer clear value proposition to customers.</p><p>CSS Product Portfolio to be offered to Customers:</p><p>Ocean Freighting - Export, Import and X-Trade Sales (both FCL &amp; LCL)</p><p>Air Freighting Export, Import and X-Trade Sales</p><p>Warehousing &amp; Distribution &amp; 3PL (Crating/Lashing, Exhibition, Last Mile Delivery)</p><p>Customs Clearance &amp; Transportation - Both Export and Import for Ocean and Air shipments.</p><p>Break Bulk / ODC shipments</p><p>Sales related Job activities:</p><p>Sales and Business Development: To achieve target of both revenue and volume with constant endeavor to meet and on-board new customers. Also, to ensure increasing the share of wallet with the existing accounts month on month.</p><p>MIS market analysis and reporting</p><p>Controlling Credit for existing and future customers</p><p><strong>Desired Candidate Profile</strong></p><p>10+ years of proven, progressive experience in sales and business development within the freight forwarding and logistics industry, with a minimum of 5 years successfully operating in the Oman market. Deep, comprehensive knowledge of global freight forwarding and experience in selling air, sea, and land freight solutions. Ability to build strong customer relationships with the ability to negotiate and drive for results.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for monitoring temperature, humidity, pressure and air quality, ensuring GMP compliance, preventive maintenance, troubleshooting, validation, calibration, audits and inspections.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma holder with pharma HVAC experience.</p> <ul> <li>Knowledge of HVAC systems</li> <li>Pharma experience</li> </ul><p></p></section>

<p><b>Position Title: S</b>DSS Welders CUM Mechanical Technicians</p><p><br></p><p>&nbsp; - Qualification: Diploma / ITI in relevant discipline</p><p>&nbsp; - Experience: 4–6 years</p><p>&nbsp; - Duty: 10 hours/day | 6 days/week</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for advanced denting, panel repair/replacement, frame straightening, and vehicle body restoration. Ensures quality repairs, guides junior technicians, uses tools efficiently, and supports workshop productivity and safety standards.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Available specialties 16 openings</p> <div> AnesthesiaInternal MedicineCardiologyCardiac AnaesthesiaEmergencyUrologyCritical CareENTNeurosurgeryNeurologyOphthalmologyGeneral SurgeryNeonatologyNephrologyOBG &amp; GynaecologyPaediatric Emergency<br> </div> <div> <p>Entry requirements</p> <div> <div>1MBBS + Internship + M.CH + <strong>6 years' experience</strong> </div> <div>2MBBS + Internship + DM or equivalent + <strong>7 years' experience</strong> </div> <div>3MBBS + Internship + MD/MS or equivalent + <strong>12 years' experience in the specialty after the Master</strong> </div> <div>4Age must be less than <strong>50 years</strong> </div> </div> </div> <div> <p>Benefits</p> <div> AccommodationLiving allowanceMedical coverTransport allowanceReturn air ticketPer Oman Labor Law<br> </div> </div> <div> <p>About this opportunity</p> <p>Consultant Physician positions are available with leading hospitals and healthcare institutions across the Sultanate of Oman. Ilahi Healthcare manages the full recruitment cycle from eligibility screening and OMSB credentialing guidance to scheduling online interviews in India and visa support. Age limit is under 50 years.</p> </div></div></section>

<p><h4>Job Description</h4> <p>The Traffic Management Supervisor supervises work activities of Traffic Management personnel engaged in the movement of GPMS-prepositioned cargo via land, air, and sea. Responsible for training, establishing, and maintaining effective outbound and receiving planning functions. Monitors cargo operations using Logistics Tool Suite (LTS), Global Freight Management (GFM), Cargo Movement Operating System (CMOS), Integrated Logistics Supply (ILS-S), Global Air Transportation Execution System (GATES), Integrated Computerized Deployment System (ICODES), Integrated Booking System (IBS), Joint Container Management system (JCM), Wood Packaging Materials (WPM) Management Toolset, Global Asset Reporting Tool (GART), and web-based tracking systems such as Integrated Data Environment/Global Transportation Network Convergence (IGC), Radio Frequency Identification (RFID-ITV) Tracking Portal, Global Decision Support Systems (GDSS-2), and Single Mobility System (SMS) to ensure In-transit Visibility (ITV) within the Defense Transportation System (DTS).</p> <p>Must be able to complete AMMO-43, Intermodal Dry Cargo Container/CSC Reinspection, AMMO-62, Technical Transportation of Hazardous Materials Distance Learning Courses, and WPM certification/recertification web-based training. Ensures all shipments comply with the International Traffic in Arms Regulations (ITAR). Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Schedules work priorities based on day-to-day Traffic Management Operations, Global Prepositioned Material Services (GPMS) Taskers, Executive Coordination Agency (ECA) Taskers, Primary Contracting Office (PCO), and Administrative Contracting Office (ACO) Taskers.</li> <li>Develops work standards; identifies training deficiencies; develops training plans; provides training and supervision for personnel using automated computer programs to process freight and web-based systems to provide in-transit visibility.</li> <li>Checks for completeness and accuracy. Verifies the nomenclatures, quantity, Transportation Control Numbers (TCN), Transportation Account Code (TAC), consignor and consignee codes, hazardous/classified materials, ITAR certifications, and other essential transportation data.</li> <li>Properly classifies freight, selects commodity codes, selects the most efficient mode of shipment, and controls obligations for government transportation funds.</li> <li>Prepares all required shipping documents for data input to CMOS/GATES, assigns Transportation Control Numbers, produces labels, issues truck manifest for general/hazardous cargo, and maintains manifest and TCN logs.</li> <li>Uses automated computer systems to process and document to accurately input the Transportation Control Numbers, Transportation Accounting Codes, consignor and consignee codes, and other essential transportation data into CMOS, GATES, or IBS.</li> <li>May perform system administrator duties.</li> <li>Inspects hazardous materials to ensure proper packaging, marking, labeling, documentation, and certification in accordance with applicable Dangerous Goods Regulations (AFMAN 24-604, 49 Code of Federal Regulations, International Air Transport Association (IATA), and International Maritime Dangerous Goods (IMDG)).</li> <li>Inspects, accepts, and inventories all incoming freight and containers for overages, shortages, and damage before acceptance. When required, initiates and completes DD Form 361, Transportation Discrepancy Report (TDR).</li> <li>Provides asset visibility and real-time view to track customer queries using IGC, RFID-ITV, GDSS2, or SMS.</li> <li>Prepares shipping documents and Movement Requests for international and domestic shipments between sites and container movements from the Sea Port of Embarkation (POE) to the Sea Port of Debarkation (POD) shipped by surface or sealift.</li> <li>Performs Port Handling and Inland Transportation (PHIT) and ensures the subcontractor performs all duties and responsibilities according to the Statement of Work (SOW). Inspects and documents each shipment for contract compliance on a Customer Service Survey form.</li> <li>Processes Export Traffic Release Requests (ETRR) for sealift shipments using Surface Deployment Distribution Command (SDDC) - Integrated Booking System (IBS).</li> <li>Performs host country customs clearances and liaises with military and host country ministries on import and export for border customs clearances, airport customs clearances, and seaport clearances.</li> <li>Selects and initiates contact with local carriers to arrange appropriate transport equipment for containers, classified, sensitive, hazardous, or outsized shipments based on size, weight, commodity description, freight classification, required delivery date, priority, or other special requirements.</li> <li>Loads/unloads 463L pallets, equipment, vehicles, and ISO containers from flat-bed/low-bed trucks. May assist in loading/unloading military vessels at the seaport.</li> <li>Performs Pallet and Net Manager duties by inspecting, issuing, accounting for, controlling, reporting, and maintaining operational stock levels of 463L pallets, nets, and other tie-down equipment located on-site.</li> <li>Performs WPM custodian duties by inspecting, certifying, record keeping, and reporting the receipt and usage requirements.</li> <li>Performs CCO duties by completing the monthly container inventory, ensuring all containers located on-site are inventoried between the 1st and 30th day of each month.</li> <li>Reports all lost, damaged, destroyed, and modified containers to the CCA within 12 hours of discovery.</li> <li>Performs container inspections and reports findings on the DA 2404 equipment inspection and maintenance worksheet.</li> <li>Receives/ships all containers in JCM within 12 hours of receipt or departure.</li> <li>Prepares, inspects, reviews, and submits Preload Plans, Hazardous Materials Diplomatic Clearances (HAZDIP), and other documents to facilitate air movement.</li> <li>Inspects cargo documentation and certifies that cargo is built correctly and airworthy.</li> <li>Performs weighing of cargo, vehicles, and outsized cargo to determine the center of balance for rolling stock and ensures cargo dimensions are within pallet and aircraft limitations.</li> <li>Determines cargo configuration, shoring, and aircraft loading requirements in accordance with Air Transportability Test Loading Activity Certifications (ATTLA).</li> <li>Assists the Air Terminal Supervisor or load team chief with selecting, assembling, palletizing, and transporting cargo loads to and from aircraft and storage areas.</li> <li>Assists in loading, unloading, and servicing aircraft. Ensures cargo loads are secure and tied down.</li> <li>Safely transports and handles explosives.</li> <li>Assists the Air Terminal Supervisor with passenger service procedures, check-in, manifest passengers and baggage, and perform security checks. May assist in loading/unloading passengers and baggage from aircraft.</li> <li>Implements, documents, and controls quality, environmental, and safety programs.</li> <li>Prepares and handles cargo in accordance with all prescribed regulations, instructions, technical orders, and procedures.</li> <li>Accomplishes receiving process for all inbound cargo functions of MILSTRIP and NON-MILSTRIP shipments addressed to the host installation SRAN in accordance with regulation.</li> <li>Maintains Technical Orders, publications, forms, and files required for Traffic Management operations.</li> <li>Compiles data and submits reports and other correspondence as required.</li> <li>Performs other duties as assigned.</li> <li>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum, PowerPoint, Excel, and Word programs.</li> <li>Excellent organizational skills and the ability to effectively work under pressure and strict timelines required.</li> <li>Ability to maintain an effective working relationship with coworkers, including multi-national staff, and external and internal customers is required.</li> <li>Must be able to communicate clearly and concisely, orally and in writing to coworkers and customers while maintaining Communication Security (COMSEC), Operational Security (OPSEC), and Computer Security (COMPUSEC).</li> <li>Will be required to receive training and operate material handling equipment.</li> <li>Knowledge and understanding of MHE equipment operations and associated hazards required.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Minimum of three years of experience in Traffic Management (TMO)/Air Freight operations or associate degree in a related field of study required.</li> <li>Experience may include but is not limited to import/export, freight acceptance, preparation, handling, cargo shipping/receiving by surface, sea and air, data records, container management, customer service, cargo operating computer systems or other related experience.</li> <li>Experienced in aircraft cargo loading/unloading and cargo tie-down restraint procedures, palletizing cargo on single or multiple 463L pallets using side and top nets, straps, chains, and devices for restraint.</li> <li>Must possess a current HAZMAT Certification in accordance with AFMAN 24-604 or ability to obtain it upon acceptance of the position.</li> <li>Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <p>Knowledge of related shipping/receiving procedures and the ability to detect/report problems to appropriate personnel preferred.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>This role is crucial for maintaining high-quality repairs, efficient workflow management, and compliance with safety and OEM standards. The ideal candidate will possess strong leadership, technical expertise, and excellent coordination skills with insurance companies, technicians, and customers to ensure timely vehicle delivery.</p></div></section>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Pre-commissioning & commissioning electrical superintendent</h4> <h4>Job summary</h4> <p>We are seeking an experienced pre-commissioning and commissioning electrical superintendent to lead and coordinate electrical pre-commissioning and commissioning activities on a major onshore energy development project. The role is responsible for ensuring the safe, timely, and compliant execution of all electrical systems through completion, energization, testing, and handover to operations.<br> The successful candidate will act as a key site-based technical authority, coordinating closely with construction, commissioning, operations, contractors, and engineering teams to deliver systems in accordance with project specifications, safety standards, and quality requirements.</p> <h4>Key responsibilities</h4> <strong>Pre-commissioning & commissioning execution</strong> <ul> <li>Lead and supervise all electrical pre-commissioning and commissioning activities, including inspections, testing, energization, and system handover.</li> <li>Ensure readiness of electrical systems for commissioning by validating construction completion, punch list clearance, and mechanical completion dossiers.</li> <li>Oversee execution of insulation resistance tests, continuity checks, functional testing, loop checks, cable meggering, and high-voltage testing.</li> <li>Manage and authorize electrical system energization activities, ensuring compliance with approved procedures and permits.</li> <li>Coordinate commissioning sequences aligned with system priorities and overall project schedules.</li> </ul> <strong>Safety & compliance</strong> <ul> <li>Ensure full compliance with HSE policies, electrical safety regulations, and project commissioning procedures.</li> <li>Lead risk assessments, job hazard analyses (JHA), and method statement reviews related to electrical works.</li> <li>Enforce lockout-tagout (LOTO) and safe isolation procedures during testing and energization.</li> <li>Promote a strong safety culture within commissioning teams and contractor workforce.</li> </ul> <strong>Team leadership & coordination</strong> <ul> <li>Supervise electrical commissioning supervisors, technicians, and contractors on site.</li> <li>Allocate manpower, tools, and resources effectively to meet commissioning milestones.</li> <li>Interface closely with construction, instrumentation, mechanical, and operations teams to resolve inter-disciplinary issues.</li> <li>Coordinate with vendors and OEMs during factory acceptance tests (FAT), site acceptance tests (SAT), and specialized commissioning activities.</li> </ul> <strong>Documentation & reporting</strong> <ul> <li>Review and approve electrical commissioning procedures, test packs, and completion dossiers.</li> <li>Ensure accurate recording of test results and verification data in commissioning databases.</li> <li>Track and manage punch lists, anomalies, and non-conformances to closure.</li> <li>Provide regular progress reports, highlighting risks, delays, and mitigation actions to commissioning management.</li> </ul> <strong>Technical oversight</strong> <p>Provide technical leadership for HV and LV systems including:</p> <ul> <li>HV/LV switchgear</li> <li>Transformers</li> <li>Motors and drives (VFDs)</li> <li>UPS systems</li> <li>Emergency power and generators</li> <li>Lighting, earthing, and lightning protection systems</li> </ul> <p>Support troubleshooting and resolution of electrical issues encountered during commissioning and early operation.</p> <strong>Handover & start-up support</strong> <ul> <li>Support structured handover of commissioned systems to operations and maintenance teams.</li> <li>Participate in start-up, performance testing, and early operational support as required.</li> <li>Ensure commissioning documentation is complete, approved, and archived per project requirements.</li> </ul> <h4>Qualifications & experience</h4> <strong>Education</strong> <p>Bachelor’s degree in electrical engineering or equivalent technical qualification.</p> <strong>Experience</strong> <ul> <li>Minimum 12–15 years of experience in electrical engineering within large EPC or energy infrastructure projects.</li> <li>Proven experience in pre-commissioning and commissioning of complex industrial facilities (LNG, oil & gas, petrochemical, or power projects preferred).</li> <li>Hands-on experience with high-voltage electrical systems and critical power infrastructure.</li> <li>Strong understanding of international electrical codes and standards (IEC, IEEE, NFPA, etc.).</li> </ul> <strong>Skills & competencies</strong> <ul> <li>Strong leadership and team coordination skills in a multicultural site environment.</li> <li>High level of competence in electrical safety management and energization planning.</li> <li>Excellent problem-solving and decision-making abilities under schedule pressure.</li> <li>Strong communication and reporting skills.</li> <li>Ability to interpret engineering drawings, single line diagrams, and commissioning procedures.</li> <li>Proficient in MS Office and electronic commissioning documentation systems.</li> </ul> <h4>Work conditions</h4> <ul> <li>Site-based role within a large industrial construction environment.</li> <li>May require shift work, extended hours, and weekend coverage during critical commissioning phases.</li> <li>Ability to work in challenging climatic conditions as per project location.</li> </ul></p><p></p>

<p>To ensure reliable operation, preventive maintenance, troubleshooting, and repair of all mechanical equipment associated with the Fume Treatment Plant (FTP) in the Steel Melting Shop, ensuring efficient dust extraction, pollution control, and compliance with environmental and safety standards.</p><p><strong>Key Responsibilities:</strong></p><p><strong>Mechanical Maintenance</strong></p><ul><li>Carry out preventive, predictive, and breakdown maintenance of all FTP mechanical equipment.</li><li>Ensure maximum equipment availability with minimum downtime.</li><li>Perform inspection, alignment, lubrication, and replacement of mechanical components.</li><li>Monitor equipment condition and recommend corrective actions.</li></ul><p><strong>Equipment Maintenance</strong></p><ul><li>Hands-on experience in operation, maintenance, troubleshooting, and upkeep of various Fume Treatment Plant and material/dust handling equipment, including Induced Draft (ID) Fans, Axial Fans, Centrifugal Fans, Bag House Filters, Pulse Jet Cleaning Systems, Dust Collectors, Rotary Air Lock Feeders, Screw Conveyors, Drag Chain Conveyors, Bucket Elevators, Pneumatic Conveying Systems, Dampers and Diverter Gates, Expansion Bellows, Ducting Systems, Butterfly Valves, Isolation Valves, Slide Gates, Dust Hoppers, Ash Handling Equipment, Rotary Valves, Gearboxes, Pumps, Air Compressors, Hydraulic Systems, and Lubrication Systems.</li></ul><p><strong>Preventive Maintenance</strong></p><ul><li>Execute PM schedules as per maintenance plans.</li><li>Conduct routine inspection of rotating equipment.</li><li>Check vibration, bearing temperature, and lubrication condition.</li><li>Replace worn-out components during planned shutdowns.</li><li>Participate in annual shutdown maintenance activities.</li></ul><p><strong>Breakdown Maintenance</strong></p><ul><li>Diagnose equipment failures.</li><li>Identify root causes of recurring failures.</li><li>Carry out emergency repairs to restore production.</li><li>Coordinate with production during maintenance activities.</li></ul><p><strong>Inspection &amp; Monitoring</strong></p><ul><li>Inspect bag filters for leakage and damage.</li><li>Monitor differential pressure across bag filters.</li><li>Inspect duct leakage and air ingress.</li><li>Check fan vibration and bearing health.</li><li>Monitor gearbox condition.</li><li>Ensure proper operation of pulse jet cleaning system.</li><li>Inspect conveyor chains and belts.</li><li>Monitor dust discharge systems.</li></ul><p><strong>Safety &amp; Environmental</strong></p><ul><li>Follow all plant safety procedures and permit systems.</li><li>Ensure compliance with environmental regulations.</li><li>Maintain proper housekeeping in the FTP area.</li><li>Participate in safety audits and toolbox talks.</li><li>Use appropriate PPE during maintenance activities.</li><li>Ensure proper isolation (LOTO) before maintenance.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p>The Senior Power System Secondary Engineer acts as the technical authority on behalf of the project developer, providing independent oversight, review, and verification of all secondary systems engineering across utility-scale renewable energy plants (Solar PV, Wind) and Battery Energy Storage Systems (BESS). The role is pivotal in ensuring that designs delivered by EPC contractors and specialist consultants are technically sound, safe, cost-effective, and fully compliant with International Best Practices, utility / TSO requirements, and applicable International Standards (IEC, IEEE/ANSI). </p><br><p>Design Review & Verification</p><ul><li><p>Lead the review and verification of all secondary design deliverables — including Single Line</p></li></ul><p>Diagrams (SLDs), Protection & Metering Diagrams (PMDs), Block Logic Diagrams (BLDs), AC/DC</p><p>schematics, and LV System Design Documents — for HV substations and renewable plants.</p><ul><li><p>Verify protection and control philosophies, including relay settings, selectivity analyses, and</p></li></ul><p>coordination studies (short-circuit calculations, CT/VT sizing) prepared by consultants and EPC</p><p>contractors.</p><ul><li><p>Review and approve interlocking schemes, bay-level logic, and station-level automation across</p></li></ul><p>switchgear, transformers, feeders, and renewable energy plant interfaces.</p><p>Substation Automation & SCADA</p><ul><li><p>Approve substation automation and SCADA architectures, ensuring correct implementation of IED</p></li></ul><p>logic, signal lists, and interlocking schemes at bay and station levels.</p><ul><li><p>Oversee the integration and configuration of communication protocols — IEC 61850</p></li></ul><p>(GOOSE/SV/MMS), IEC 60870-5-104, and DNP3 — governing data flow between Plant Power</p><p>Controllers (PPC/EMS), substations, and utility control centers.</p><ul><li><p>Review IED configurations, substation HMI displays, and historian / data management architectures</p></li></ul><p>for completeness and compliance.</p><p>Telecommunications & Cybersecurity</p><ul><li><p>Review and validate communication and telecommunication architectures, including managed</p></li></ul><p>network design (VLANs, PRP/HSR redundancy), cybersecurity policies (IEC 62351 / NERC-CIP</p><p>aligned), and tele-protection performance requirements.</p><p>Standards, Compliance & Grid Code Adherence</p><ul><li><p>Ensure strict adherence to international standards and grid codes (IEC, IEEE/ANSI) by performing</p></li></ul><p>technical audits and vetting technical submissions to Transmission / Distribution System Operators</p><p>(TSO/DSO).</p><ul><li><p>Manage technical interfaces and coordinate between EPC contractors, engineering consultants,</p></li></ul><p>OEMs, and the grid operator to ensure a coherent and optimized secondary systems design.</p><p>Testing, Commissioning & Project Governance</p><ul><li><p>Provide technical governance during critical project phases, including witnessing Factory</p></li></ul><p>Acceptance Tests (FAT) and Site Acceptance Tests (SAT), and reviewing commissioning</p><p>procedures for all secondary systems.</p><ul><li><p>Review and approve test plans, testing protocols, punch lists, and commissioning records to ensure</p></li></ul><p>safe energization of HV substations and plant systems.</p><ul><li><p>Act as the Owner’s Engineer representative in te</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education</p><ul><li><p>Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or a closely related field.</p></li><li><p>Professional Engineering registration (PE / CEng or equivalent) is an advantage.</p></li></ul><p>Experience</p><ul><li><p>8+ years of engineering experience with a demonstrable focus on substation secondary systems</p></li></ul><p>design and delivery.</p><ul><li><p>Significant experience in a developer, owner’s engineer, or utility role with direct responsibility for</p></li></ul><p>managing and challenging EPC contractor deliverables.</p><ul><li><p>Proven track record on grid-connected utility-scale renewable energy projects (Solar PV, Wind)</p></li></ul><p>and/or Battery Energy Storage Systems (BESS).</p><ul><li><p>Experience working across the full project lifecycle from FEED and detailed design through to FAT,</p></li></ul><p>SAT, and commercial operation</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Spécialiste Opérationnel Armement Air-sol F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Vos missions :<br>Vous cherchez à intégrer un environnement dynamique rythmé par des challenges technologiques forts contribuant à la souveraineté française ? Alors ne cherchez plus et rejoignez le département en charge du développement d'armements Air-Sol, évoluant dans un environnement innovant parmi les briques technologiques Safran (drones, systèmes autonomes, technologies spatiales, motorisation, …) !<br>En tant que spécialiste opérationnel, vous jouerez un rôle central dans l'intégration et les développements des systèmes d'armement air-sol, apportant votre expertise pour guider les solutions techniques et assurer le succès des missions opérationnelles. Votre rôle sera crucial pour former, conseiller et soutenir nos armées françaises et nos clients internationaux.<br>Vos missions principales seront <br>- Formation et Conseil Technique : Capitaliser sur votre expérience de naviguant pour concevoir et dispenser des formations techniques de haut niveau aux clients, assurant leur utilisation optimale des systèmes d'armement dans un contexte opérationnel.<br>- Optimisation des Systèmes : Analyser les retours d'expérience et contribuer de manière proactive à l'amélioration continue des systèmes d'armement, en intégrant les retours clients et le contexte opérationnel pour maximiser la réponse aux besoins.<br>- Assistance aux Essais en vol : Apporter un soutien direct lors des missions d'essais, en France et à l'étranger, en assurant la coordination des opérations <br>o Assurer la rédaction des documents contractuels relatifs à la préparation des essais en vol<br>o Préparer et suivre les essais en vol, en coordination avec les centres d'essais, en particulier DGA<br>o Rédiger les comptes rendus d'essais <br>- Interface Client : Agir comme point de contact privilégié pour les utilisateurs, facilitant la communication et la résolution de problèmes techniques et assurer un dialogue constant entre Safran Electronics &amp; Defense, les forces armées et les centres d'essai DGA.<br>Spécificités du poste :<br>- Le poste est basé sur le site d'Eragny (95) <br>- Prévoir des déplacements fréquents en France (Istres, Cazaux, Eragny) et à l'étranger <br>- L'engagement dans la réserve opérationnelle des forces armées est possible et souhaité.</p><br><br><p>Ces activités vous placent au centre du processus de conception des prototypes produit et vous permettent d'avoir une vision globale de son fonctionnement. Vous serez en interaction avec les différentes équipes métiers en charge de la conception et de la vérification des sous-systèmes.<br>Ce poste est un bon tremplin pour évoluer à moyen terme vers un poste d'Architecte Système ou un poste de responsable de l'équipe Essai.<br>Pour en savoir plus sur nos activités : https://www.safran-group.com/fr/produits-services/aasm-hammertm-armement-air-sol-modulaire-haute-precision </p><br><br><p>Parlons de vous :<br>- Ancien personnel des forces armées (Armée de l'Air et de l'Espace ou Marine Nationale), vous avez une expérience en tant que personnel navigant sur avion de chasse (Pilote ou Navigateur Officier Système d'Armes), idéalement sur Rafale.<br>- Vous possédez de solides connaissances aéronautiques, sur les avions d'arme, les armements et une culture technique étendue.<br>- Dynamique, rigoureux et autonome, vous avez un excellent sens relationnel, appréciez le travail en équipe, et êtes capable de vous intégrer et de travailler dans un contexte pluridisciplinaire sur des projets complexes nécessitant une coordination efficace et des capacités de reporting et de synthèse.</p><br><br><br> </div>

<p>The Traffic Management Supervisor supervises work activities of Traffic Management personnel engaged in the movement of GPMS-Prepositioned cargo via land, air and sea. Responsible for training, establishing and maintaining effective outbound and receiving planning functions. Monitors cargo operations using Logistics Tool Suite (LTS), Global Freight Management (GFM), Cargo Movement Operating System (CMOS), Integrated Logistics Supply (ILS-S), Global Air Transportation Execution System (GATES), Integrated Computerized Deployment System (ICODES), Integrated Booking System (IBS), Joint Container Management system (JCM), Wood Packaging Materials (WPM) Management Toolset, Global Asset Reporting Tool (GART) and web-based tracking systems such as integrated Data Environment/Global Asset Reporting Tool (GART) and web-based tracking systems such as Integrated Data Environment/Global Transportation Network Convergence (IGC), Radio Frequency Identification (RFIDITV) Tracking Portal, Global Decision Support Systems (GDSS-2) and Single Mobility System (SMS) to ensure In-transit Visibility (ITV) within the Defense Transportation System (DTS). Must be able to complete AMMO-43, Intermodal Dry Cargo Container/CSC Reinspection, AMMO-62, Technical Transportation of Hazardous Materials Distance Learning Courses and WPM certification/recertification web-based training. Ensures all shipments comply with the International Trade and Arms Regulation (ITAR). Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p><p><br></p><p><b>Principal Accountabilities</b></p><p><br></p><p>Schedules work priorities based on day-to-day Traffic Management Operations, Global Prepositioned Material Services (GPMS) Taskers, Executive Coordination Agency (ECA) Taskers, Primary Contracting Office (PCO) and Administrative Contracting Office (ACO) Taskers.</p><p>Develops work standards; identifies training deficiencies; develops training plans; provides training and supervision for personnel using automated computer programs to process freight &amp; web-based systems to provide in transit visibility.</p><p>Checks for completeness and accuracy. Verifies the Nomenclatures, Quantity, Transportation Control Numbers (TCN), Transportation Account Code (TAC), Consignor and Consignee Codes, Hazardous/Classified materials, ITARS certifications and other essential transportation data.</p><p>Properly classified freight, selects commodity codes, selects the most efficient mode of shipment and controls obligations for government transportation funds.</p><p>Prepares all required shipping documents for data input to CMOS/GATES, assigns Transportation Control Numbers, produces labels, issues truck manifest for general/hazardous cargo and Maintains Manifest and TCN logs.</p><p>Uses automated computer systems to process and document to accurately input the Transportation Control Numbers, Transportation Accounting Codes, consignor and consignee codes and other essential transportation data into CMOS, GATES or IBS.</p><p>May perform System Administrator duties.</p><p>Inspects Hazardous Materials to ensure proper packaging, marking, labeling, documentation and certification in accordance with applicable Dangerous Goods Regulations (AFMAN 24-604, 49 Code of Federal Regulation, International Air Transport Association (IATA) and International Maritime Dangerous Goods (IMDG).</p><p>Inspects, accepts and inventories all incoming freight and containers for overages, shortages and damage before acceptance. When required, initiate and complete DD Form 361, Transportation Discrepancy Report (TDR).</p><p>Provides asset visibility and real-time view to track customer queries using IGC, RFID-ITV, GDSS2 or SMS.</p><p>Prepares shipping documents and Movement Requests for international and domestic shipments between sites and container movements from the Sea Port of Embarkation (POE) to the Sea Port of Debarkation (POD) shipped by surface or sealift.</p><p>Performs Port Handling and Inland Transportation (PHIT) and ensures the subcontractor performs all duties and responsibilities according to the Statement of Work (SOW). Inspects and documents each shipment for contract compliance on a Customer Service Survey form.</p><p>Processes Export Traffic Release Requests (ETRR) for sealift shipments using Surface Deployment Distribution Command (SDDC) - Integrated Booking System (IBS).</p><p><br></p><p><b>Minimum Requirements</b></p><p>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum, Power Point, Excel and Word programs.</p><p>Excellent organizational skills and the ability to effectively work under pressure and strict timelines required.</p><p>Ability to maintain an effective working relationship with coworkers, including multi-national staff, and external and internal customers is required.</p><p>Must be able to communicate clearly and concisely, orally and in writing to coworkers and customers while maintaining Communication Security (COMSEC), Operational Security (OPSEC) and Computer Security (COMPUSEC).</p><p>Will be required to receive training and operate material handling equipment.</p><p>Knowledge and understanding of MHE equipment operations and associated hazards required.</p><p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p><p>High School diploma or equivalent required.</p><p>Minimum of three years of experience in Traffic Management (TMO)/Air Freight operations or associate degree in a related field of study required.</p><p>Experience may include but is not limited to import/export, freight acceptance, preparation, handling, cargo shipping/receiving by surface, sea and air, data records, container management, customer service, cargo operating computer systems or other related experience.</p><p><br></p><p><b>Preferred Qualifications</b></p><p>Knowledge of related shipping/receiving procedures and the ability to detect/report problems to appropriate personnel preferred.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>Production Engineer Responsibilities: - Identify manpower requirements based on production plans. - Raise manpower requisitions for new hires. - Coordinate with the HR department for recruitment activities. - Screen resumes and shortlist suitable candidates. - Conduct initial interviews for operators, technicians, and production staff. - Evaluate candidates' technical skills, experience, and attitude. - Plan and conduct new employee induction and orientation. - Train new employees on production processes, quality standards, and safety procedure.</p><p><strong>Desired Candidate Profile</strong></p><p>Requirements - 3-7 years experience in sandwich panel manufacturing company.</p>