مطلوب مشرف مناديب

<p><h4>Principal accountabilities</h4> <p>The warehouse operations supervisor is responsible to the site supply manager for the effective management of all functions supporting the Category II Satellite supply account. Responsible for effective supervision of subordinates. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <p>Ensures the condition and identification of all items received, stored, issued, turned-in, shipped or transferred to and from the supply account.</p> <p>Manages the shelf-life program and provides technical assistance to the other functions on site as required.</p> <p>Ensures the inspection of local purchase assets, delivered under contracts that require acceptance.</p> <p>Research part numbers to obtain National Stock Numbers (NSNs) that need loading.</p> <p>Maintains a limited file of technical orders and research materials. Issue items to maintenance quality control and the Time Compliance Technical Order (TCTO) kit monitor to ensure TCTO modifications and preservation are conducted.</p> <p>Establishes an aggressive quality assurance/inspection program to ensure that all Material Storage and Distribution (MS&D) functions are in compliance with applicable warehousing procedures and safety practices. Provides inspection reports to the (MS&D) supervisor and inspected activity.</p> <p>Manages the Material Deficiency Report and Supply Discrepancy Report (SDR) programs.</p> <p>Acts as point of contact for coordination with the Environment Manager on storage requirements for health hazard items.</p> <p>Develops standards for subordinates. Implements the precepts of quality assurance within the guidelines set forth in the ISO 9001 program. Ensures that all work is completed to this quality standard and provides employees with feedback on their progress.</p> <p>Provides on-the-job training to newly assigned personnel.</p> <p>Performs all assigned duties related to the receipt, issue, storage and maintenance of hazardous materials (HAZMAT) and supplies stored on site when tasked.</p> <p>Maintains vendor BPA files.</p> <p>Performs other duties as assigned.</p> <p>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</p> <h4>Minimum requirements</h4> <p>Must be proficient in the use of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p> <p>Knowledge of warehouse layout, design and setup to meet Department of Defense and Occupational Safety and Health Administration safety standards required.</p> <p>Fundamental knowledge of the Department of Defense and USAF or US service equivalent Hazardous Materials Program required.</p> <p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p> <p>Will be required to operate material handling equipment up to 10k forklift.</p> <p>High school diploma or equivalent required.</p> <p>Five to seven years' experience in warehousing and supply chain associated with ILSS required.</p> <p>Must have three years' experience in a supervisory capacity.</p> <p>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</p> <p>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</p> <p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p> <p>Ability to travel domestically and internationally.</p> <h4>Preferred qualifications</h4> <p>Knowledge of USAF or US service equivalent automated system Integrated Logistics System Supply (ILSS) policies and procedures preferred.</p></p><p></p>

<p><h4>Principal accountabilities</h4> <p>The warehouse operations supervisor is responsible to the site manager for the effective management of all functions supporting the Category II Satellite supply account. Responsible for effective supervision of subordinates. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <p>Ensures the condition and identification of all items received, stored, issued, turned-in, shipped or transferred to and from the supply account.</p> <p>Manages the shelf-life program and provides technical assistance to the other functions on site as required.</p> <p>Ensures the inspection of local purchase assets, delivered under contracts that require acceptance.</p> <p>Research part numbers to obtain National Stock Numbers (NSNs) that need loading.</p> <p>Maintains a limited file of technical orders and research materials. Issue items to maintenance quality control and the Time Compliance Technical Order (TCTO) kit monitor to ensure TCTO modifications and preservation are conducted.</p> <p>Establishes an aggressive quality assurance/inspection program to ensure that all Material Storage and Distribution (MS&D) functions are in compliance with applicable warehousing procedures and safety practices. Provides inspection reports to the MS&D supervisor and inspected activity.</p> <p>Manages the Material Deficiency Report and Supply Discrepancy Report (SDR) programs.</p> <p>Acts as point of contact for coordination with the Environmental Manager on storage requirements for health hazard items.</p> <p>Develops standards for subordinates. Implements the precepts of quality assurance within the guidelines set forth in the ISO 9001 program. Ensures that all work is completed to this quality standard and provides employees with feedback on their progress.</p> <p>Provides on-the-job training to newly assigned personnel.</p> <p>Performs all assigned duties related to the receipt, issue, storage and maintenance of hazardous materials (HAZMAT) and supplies stored on site when tasked.</p> <p>Maintains vendor BPA files.</p> <p>Performs other duties as assigned.</p> <p>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</p> <h4>Minimum requirements</h4> <p>Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p> <p>Knowledge of warehouse layout, design and setup to meet Department of Defense and Occupational Safety and Health Administration safety standards required.</p> <p>Fundamental knowledge of the Department of Defense and USAF or US service equivalent Hazardous Materials Program required.</p> <p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p> <p>Will be required to operate material handling equipment up to 10k forklift.</p> <p>High school diploma or equivalent required.</p> <p>Five to seven years' experience in warehousing and supply chain associated with ILSS required.</p> <p>Must have three years' experience in a supervisory capacity.</p> <p>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</p> <p>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</p> <p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p> <p>Ability to travel domestically and internationally.</p> <h4>Preferred qualifications</h4> <p>Knowledge of USAF or US service equivalent automated system Integrated Logistics System Supply (ILSS) policies and procedures preferred.</p> <h4>Compensation details</h4> <p>Hourly and additional incentives.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting: 04/27/2026 - Until filled.</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Principal Accountabilities<\/h4>\n<p>The chief age mechanic supervises, trains age technicians and performs inspections, maintenance and servicing and storage of assigned age. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven age. Responsible for the day-to-day age shop operations and communicates with the age superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n<ul>\n<li>Primary supervisor to train age mechanics and perform periodic inspection, maintenance and repair actions on assigned age assets.<\/li>\n<li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n<li>Prepares age\/FLSE and other equipment for exercises or actual deployments.<\/li>\n<li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n<li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n<li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n<li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n<li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n<li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n<li>Conducts on-the-job training for age mechanics on assigned age\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n<li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n<li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n<li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n<li>Operates material handling equipment as required.<\/li>\n<li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of hazmat when required.<\/li>\n<li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n<li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n<li>Attends age staff meetings as required.<\/li>\n<li>Prepares personnel performance reports as assigned.<\/li>\n<li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n<li>Performs other duties as assigned.<\/li>\n<li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n<h4>Minimum Requirements<\/h4>\n<ul>\n<li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n<li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n<li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n<li>Will be required to operate material handling equipment.<\/li>\n<li>High school diploma or equivalent required.<\/li>\n<li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n<li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n<li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n<li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n<li>Will be exposed to extreme noise from operating equipment.<\/li>\n<li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n<li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n<li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n<h4>Preferred Qualifications<\/h4>\n<ul>\n<li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n<li>Ideal candidate will have training as a USAF age, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Job Description<\/h4>\n<p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n\n<h4>Principal Accountabilities<\/h4>\n<ul>\n <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.<\/li>\n <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n <li>Prepares AGE\/FLSE and other equipment for exercises or actual deployments.<\/li>\n <li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n <li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n <li>Conducts on-the-job training for AGE mechanics on assigned AGE\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n <li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n <li>Operates material handling equipment as required.<\/li>\n <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.<\/li>\n <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n <li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n <li>Attends AGE staff meetings as required.<\/li>\n <li>Prepares personnel performance reports as assigned.<\/li>\n <li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n <li>Performs other duties as assigned.<\/li>\n <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n\n<h4>Minimum Requirements<\/h4>\n<ul>\n <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n <li>Will be required to operate material handling equipment.<\/li>\n <li>High school diploma or equivalent required.<\/li>\n <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n <li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n <li>Will be exposed to extreme noise from operating equipment.<\/li>\n <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n <li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n <li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n\n<h4>Preferred Qualifications<\/h4>\n<ul>\n <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n <li>Ideal candidate will have training as a USAF AGE, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION DESCRIPTION: Position Title: Sr. Instrument Technician Reports to: Instrument Supervisor Department: Maintenance and Operation Department Location: Duqm/Ras Markaz</p><p>JOB PURPOSE: Take job order for maintenance services and overhauls of all Instrumentation &amp; Control equipment and related systems like Compressors, pumps, generators, tanks system and any rotating or static equipment located in the Terminal. In addition, to ensure maintenance activities are carried out as planned within preset time, high quality and as per HSE standards in order to maintain high reliability &amp; availability of Instrument equipment.</p><p>The position will act in accordance with OTTCO s Mission, Vision, Values &amp; Strategies, as well as, policies,</p><p>guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>REPORTING STRUCTURE: Number of Staff Supervised Direct Reports: 0 Total: 0</p><p>KEY RESPONSIBILITIES:</p><p>Perform all Instrumentation activities role in Tank Terminal Industry &amp; Duqm Petrochemical Terminal.</p><p>Prepare and signatory for Permit to Work activities within area of responsibility as licensed and advised by Supervisor and perform operations and maintenance activities in accordance with established company Quality Systems and manufacturers' practices and procedures.</p><p>Ensure the availability of instrumentation, analyzers, control systems, and communication systems in the area, including the best work practices in maintenance.</p><p>Install, maintain, repair, overhaul, calibrate, and test various industrial instruments such as control valves, transmitters, DCS, Fire and Gas Systems, ESD systems, and pressure controls.</p><p>Preform and control all work related to instrument maintenance and calibration and analyze periodic maintenance reports to improve section efficiency.</p><p>Maintain all instrumentation drawings in as-built condition and ensure any modifications are reflected accurately.</p><p>Update, maintain detailed records of maintenance, calibration, and repair activities. Document any modifications made to systems and update technical manuals and drawings as necessary.</p><p>Report any failures of safety-critical elements as per OTTCO standards and oversee the instrumentation side in all assigned locations.</p><p>Maintain a high level of safety awareness and standards in all daily duties and tasks and guide the subordinate staff on safe working practices.</p><p>Report daily activity status and work progress to the Instrument Supervisor and assist in planning, coordinating, and controlling instrumentation work activities.</p><p>Continuously review Instrumentation and Control equipment to identify improvements in operability, reliability, safety, and integrity, and provide written feedback to the Instrument Supervisor.</p><p>Maintain close communication with the Instrument Supervisor prior to work execution and support them by providing leadership, mentoring, and training to Instrument Technicians.</p><p>Coordinate and supervise the work of Instrument Technicians and any sub-contractors personnel working on the terminal facilities associated with the Instrument &amp; Control facilities.</p><p>Promptly respond to callouts for any system or equipment failures, ensuring timely resolution of issues to minimize downtime and maintain operational efficiency.</p><p>Implement the Preventive Maintenance (PM) plan, manage work backlogs and maintain the maintenance KPI.</p><p>Ensure that instrumentation maintenance history and reports are updated in SAP (CMMS), maintenance digitalization and critical issues and repetitive failures by implementing Root Cause Analysis (RCA) recommendations.</p><p>Provide technical support during plant shutdowns</p><p>Participate in instrumentation-related projects, including upgrades, retrofits, and new installations.</p><p>Train and mentor junior technicians, providing guidance and support to help them develop their skills and knowledge.</p><p>Interface with other maintenance/service department staff to coordinate breakdown or routine maintenance work on facilities and plants.</p><p>Full utilization of the use of SAP software to manage the day-to-day planning and scheduling of maintenance activities, ensuring quality control of the work is done and accomplished successfully.</p><p>Effective utilization of service laptops and field-related software, including PLC, TGS, and other instrumentation and control systems, to support day-to-day maintenance activities, diagnostics, troubleshooting, and system monitoring, ensuring work quality, system integrity, and successful task completion.</p><p>Manage spare parts inventory and ensure the availability for overhauls and emergency maintenance critical spares, follow up on spare status to support timely and high-quality work execution, and inspect newly purchased materials and spares upon receipt to ensure compliance with required specifications.</p><p>Ensure all required critical &amp; normal consumables are identified, ordered and stocked at stores.</p><p>Maintain tools and equipment s to be fully operational and in good working order.</p><p>Demonstrate familiarity with QHSE policies, objectives, procedures, and related record-keeping requirements.</p><p>Maintain awareness of emergency preparedness and response measures, as well as the implications of non-conformance with the Integrated Management System requirements, including failure to meet organizational compliance obligations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Qualifications for this position is Diploma in Instrumentation and Control Engineering or equivalent.</p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p>5+ years of experience in Instrumentation and Control Maintenance activities preferably at Oil and Gas Industry</p><p>Background in Instrumentation maintenance best practices.</p><p>requirements, Oil/Gas process &amp; systems procedures and practices</p><p>A good knowledge of relevant operations, HSE requirements, Oil/Gas process &amp; systems procedures and practices.</p><p>Ability to perform as a team player.</p><p>Self-motivated and dependable, demonstrating strong initiative.</p><p>Ability to perform as a team player.</p><p>Ability to deal with change and demonstrate flexibility as required</p><p></p></section>

<p><h4>Principal Accountabilities<\/h4>\n<p>The chief age mechanic supervises, trains age technicians and performs inspections, maintenance and servicing and storage of assigned age. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven age. Responsible for the day-to-day age shop operations and communicates with the age superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n<ul>\n<li>Primary supervisor to train age mechanics and perform periodic inspection, maintenance and repair actions on assigned age assets.<\/li>\n<li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n<li>Prepares age\/FLSE and other equipment for exercises or actual deployments.<\/li>\n<li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n<li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n<li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n<li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n<li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n<li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n<li>Conducts on-the-job training for age mechanics on assigned age\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n<li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n<li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n<li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n<li>Operates material handling equipment as required.<\/li>\n<li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of hazmat when required.<\/li>\n<li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n<li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n<li>Attends age staff meetings as required.<\/li>\n<li>Prepares personnel performance reports as assigned.<\/li>\n<li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n<li>Performs other duties as assigned.<\/li>\n<li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n<h4>Minimum Requirements<\/h4>\n<ul>\n<li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n<li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n<li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n<li>Will be required to operate material handling equipment.<\/li>\n<li>High school diploma or equivalent required.<\/li>\n<li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n<li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n<li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n<li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n<li>Will be exposed to extreme noise from operating equipment.<\/li>\n<li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n<li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n<li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n<h4>Preferred Qualifications<\/h4>\n<ul>\n<li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n<li>Ideal candidate will have training as a USAF age, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Principal accountabilities</h4> <p>The warehouse operations supervisor is responsible to the site supply manager for the effective management of all functions supporting the Category II Satellite supply account. Responsible for effective supervision of subordinates. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <p>Ensures the condition and identification of all items received, stored, issued, turned-in, shipped or transferred to and from the supply account.</p> <p>Manages the shelf-life program and provides technical assistance to the other functions on site as required.</p> <p>Ensures the inspection of local purchase assets, delivered under contracts that require acceptance.</p> <p>Research part numbers to obtain National Stock Numbers (NSNs) that need loading.</p> <p>Maintains a limited file of technical orders and research materials. Issue items to maintenance quality control and the Time Compliance Technical Order (TCTO) kit monitor to ensure TCTO modifications and preservation are conducted.</p> <p>Establishes an aggressive quality assurance/inspection program to ensure that all Material Storage and Distribution (MS&D) functions are in compliance with applicable warehousing procedures and safety practices. Provides inspection reports to the (MS&D) supervisor and inspected activity.</p> <p>Manages the Material Deficiency Report and Supply Discrepancy Report (SDR) programs.</p> <p>Acts as point of contact for coordination with the Environment Manager on storage requirements for health hazard items.</p> <p>Develops standards for subordinates. Implements the precepts of quality assurance within the guidelines set forth in the ISO 9001 program. Ensures that all work is completed to this quality standard and provides employees with feedback on their progress.</p> <p>Provides on-the-job training to newly assigned personnel.</p> <p>Performs all assigned duties related to the receipt, issue, storage and maintenance of hazardous materials (HAZMAT) and supplies stored on site when tasked.</p> <p>Maintains vendor BPA files.</p> <p>Performs other duties as assigned.</p> <p>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</p> <h4>Minimum requirements</h4> <p>Must be proficient in the use of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</p> <p>Knowledge of warehouse layout, design and setup to meet Department of Defense and Occupational Safety and Health Administration safety standards required.</p> <p>Fundamental knowledge of the Department of Defense and USAF or US service equivalent Hazardous Materials Program required.</p> <p>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</p> <p>Will be required to operate material handling equipment up to 10k forklift.</p> <p>High school diploma or equivalent required.</p> <p>Five to seven years' experience in warehousing and supply chain associated with ILSS required.</p> <p>Must have three years' experience in a supervisory capacity.</p> <p>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</p> <p>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</p> <p>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</p> <p>Ability to travel domestically and internationally.</p> <h4>Preferred qualifications</h4> <p>Knowledge of USAF or US service equivalent automated system Integrated Logistics System Supply (ILSS) policies and procedures preferred.</p></p><p></p>

<p>To cook and prepare all required dishes in a timely and efficient manner according to related recipes and specifications To use materials correctly and make continuous efforts to avoid and/or minimize wastage To keep kitchen and other work places clean and tidy at all times To coordinate works with colleagues and work together as one team, ensure harmony and provide assistance as may be required To ensure correct use of equipment and report damages for required repairs To ensure the responsibility for the integrity and confidentiality of all documents and other information within the company and to ensure that no information is disclosed to unauthorised personnel To observe and enforce the company s Rules and Regulations and report any serious breach of these rules to immediate superiors To ensure/carry out all works in strict and full compliance with Company HSE Plans, Policies, Procedures and to STOP any unsafe work immediately To understand and comply with the AA Group s Commitment to Health, Safety and Environment (HSE) that is expressed through the OHS Policy, Environment Policy, Alcohol &amp; Drugs Policy, Transportation Policy, Food Safety &amp; Hygiene Policy, Anti Bribery &amp; Corruption Policy and the Ethical Code of Conduct Policy, The 12 Life Saving Rules and its Consequence Matrix and all other related documents within the AA Group s QHSE MS including that Everyone is empowered to STOP unsafe work To ensure that the rules and regulations of the AA Group and the Oman Government are understood and complied with and that any necessary disciplinary action will be taken whenever these rules and regulations are broken To understand and comply with the AA Group s Policy that prior Management permission is required before leaving a location; the use of private transport is prohibited and only Company provided or approved transportation shall be used for commuting to and from Oil &amp; Gas Interior locations To carry out any other duties and tasks required by superiors</p>

<p><h4>Job summary</h4> <p>The Fuels Manager (FM)/Alternate Site Manager (ASM) provides leadership and guidance to fuels department personnel. Responsible for the overall program management of fuels assets. Manages asset receipts, accountability, serviceability, storage, security, periodic inspections, and deployment. Establishes asset reconstitution production schedules to meet United States Air Forces Central (USAFCENT) requirements. Reviews asset reconstitution production, periodic maintenance, and inventory reports to ensure timely and accurate submissions to USAFCENT A4/RF. Provides guidance on environmental issues as they relate to fuel assets. Responsible for program quality assurance as part of ISO 9000 standards. The ASM portion of the position coordinates and oversees the day-to-day operations, maintenance, personnel, and services at assigned location ensuring quality to the customer as directed by Site Manager.</p> <h4>Job duties & responsibilities</h4> <ul> <li>Primary liaison between Amentum sites and USAFCENT on issues pertaining to fuels.</li> <li>Oversees reconstitution and preservation plan for fuels based upon requirements and the Performance Work Statement (PWS), including calibration of meters, gauges and tools, functional testing of pumping systems, and hydrostatic testing of fuel hoses.</li> <li>Tracks fuels deployments, ensuring timely delivery of assets.</li> <li>Answers inquiries from program management and sites concerning various requests from the USAF and external agencies.</li> <li>Attends staff meetings and provides management reports and briefings, as required.</li> <li>Provides assistance, guidance, and coordination on revisions of fuels maintenance actions in response to changes in Air Force publications, technical orders, and the PWS.</li> <li>Oversees product quality deficiency reports from submission to resolution.</li> <li>Creates, coordinates, implements, and revises fuels standard operating procedures, work instructions, and training plans, as required.</li> <li>Conducts periodic staff assistance visits to all sites.</li> <li>Performs other duties and TDY travel as directed by management.</li> <li>Performs duties of Site Manager in Site Manager’s absence.</li> <li>Manages basic support services and accompanying labor force for assigned location.</li> <li>Manages small team of U.S. nationals supervising skilled, semi-skilled foreign and local nationals.</li> <li>Ensures that all requirements are met as defined in the Performance Work Statement.</li> <li>Communicates new requirements, concerns, and issues to PMO for resolution.</li> <li>Ensures that requirements are met for employee health, morale, and welfare.</li> <li>Ensures that employees adhere to the Armed Forces and host nation standards of conduct concerning in-theater operations.</li> <li>Effectively manages any employee management issues that may arise.</li> <li>Closely supervises equipment and material within assigned area of responsibility.</li> <li>Closely supervises the arrival, retrofit, and upgrade of equipment and material as assigned.</li> <li>Conducts the weekly and monthly collection of data for quality input to PEBs or AFEB.</li> <li>Submits timely reports required by the United States Government.</li> <li>Conducts regular property inventories.</li> <li>Performs other duties as assigned.</li> </ul> <h4>Management responsibility</h4> <ul> <li>Provides functional management for fuels issues program wide.</li> <li>Manages day-to-day operations as assigned by Site Manager.</li> <li>Performs Site Manager duties in Site Manager’s absence.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Ability to communicate effectively both verbally and in writing. Capable of organizing data quickly and effectively. Able to prepare and execute briefings.</li> <li>Knowledge of the USAF maintenance management system, including OLVIMS required.</li> <li>Knowledge of the maintenance and operating procedures for Fuels Operational Readiness Capability Equipment (FORCE) desired.</li> <li>Knowledge of fuels industrial safety, quality, environmental procedures, material deficiency reporting, and the USAF supply system required.</li> <li>Proficiency in Microsoft software applications required, particularly MS Outlook, PowerPoint, Excel, Word, etc.</li> <li>Knowledgeable and able to supervise all aspects of assignment of qualified personnel, scheduling workload, developing programs and procedures to satisfy customer requirements, coordinating with on-base support, preparing official correspondence, evaluating improvement suggestions, and knowledge of chain of command and protocol.</li> <li>Compliance with fire, safety, and environmental protection requirements.</li> <li>Background displaying ability to staff, organize, lead and manage a diverse workforce larger than five people, particularly foreign nationals (FNs).</li> <li>Willingness to travel and work in various locations in the world.</li> <li>Willingness to work shifts and extended hours in support of 24/7 operations.</li> <li>Willingness to learn about the cultural, economic, geopolitical, and/or military issues of the Middle East and/or Arab-speaking countries within that region desired.</li> <li>Ability to exercise discretion and make effective decisions.</li> <li>Solid communication skills, strong interpersonal skills.</li> <li>Strong ability to work as a member of a diverse, dynamic team.</li> <li>Outstanding problem-solving skills and sound judgment.</li> <li>Must be capable of obtaining a flight line driver license when required by COR.</li> <li>Must be capable of obtaining HAZMAT certifications as required by the PWS and/or host nation.</li> </ul> <h4>Experience & education</h4> <ul> <li>The Fuels Manager shall have a minimum of six (6) years of specialized experience in fuels hydrant operations and maintenance of bulk petroleum storage terminals.</li> <li>The FM/ASM shall have a minimum of three (3) years of experience in logistics, project management, operations management or facilities management/maintenance field.</li> <li>As a minimum, the Fuels OM&R Manager shall have two (2) years of supervisory experience in fuel hydrants operations with emphasis in operations and environmental compliance.</li> <li>Must be able to obtain and maintain a SECRET US Government Clearance. Note: US Citizenship is required to obtain a SECRET Clearance.</li> <li>Must have a high school diploma or equivalent.</li> <li>Bachelor’s degree preferred but not required.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Works in normal office environment and as required outside and/or in fuel facilities.</li> <li>Living and working conditions at the assignment location could be remote and uncomfortable.</li> <li>Long hours, exposure to weather and hazardous conditions.</li> <li>Personnel should be aware of moving on short notice and under adverse conditions.</li> </ul> <h4>Travel / other</h4> <ul> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Disclaimer</h4> <p>The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.</p> <h4>Compensation details</h4> <p>TBD</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>SUMMARY</p><p>Steel Fitter / Steel Fixer</p><p>Job Location: Oman (Candidate must be willing to relocate to Oman)</p><p>Industry: Construction Infrastructure Civil Engineering</p><p>Walk-in Interview location - Bihar - Patna West Bengal - Beharampur Odisha - Bhubaneshwar Telangana - Hyderabad</p><p>Job Responsibilities:</p><p>Install and fix reinforcement steel bars and mesh as per engineering drawings.</p><p>Read and interpret reinforcement drawings and bar bending schedules (BBS).</p><p>Cut, bend, and tie steel bars according to project specifications.</p><p>Ensure proper placement and securing of reinforcement before concrete pouring.</p><p>Follow safety procedures and site regulations at all times.</p><p>Coordinate with supervisors and construction teams to meet project deadlines.</p><p>Salary: 25,000 - 26,000 per month + Overtime + Free Accommodation + Transportation + Medical Insurance.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum 3 years of experience in steel fixing / steel fitting.</li><li>Ability to read and understand reinforcement drawings and BBS.</li><li>Experience in high-rise building, commercial, industrial, or infrastructure projects preferred.</li><li>Physically fit and capable of performing construction site duties.</li><li>Knowledge of construction safety standards.</li><li>Willingness to work in Oman and adapt to site requirements.</li><li>Education: ITI / Diploma / Technical Qualification preferred. Relevant construction experience can compensate for formal qualifications.</li></ul><p></p></section>

<p><h4>Job Description<\/h4>\n<p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n\n<h4>Principal Accountabilities<\/h4>\n<ul>\n <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.<\/li>\n <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n <li>Prepares AGE\/FLSE and other equipment for exercises or actual deployments.<\/li>\n <li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n <li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n <li>Conducts on-the-job training for AGE mechanics on assigned AGE\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n <li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n <li>Operates material handling equipment as required.<\/li>\n <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.<\/li>\n <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n <li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n <li>Attends AGE staff meetings as required.<\/li>\n <li>Prepares personnel performance reports as assigned.<\/li>\n <li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n <li>Performs other duties as assigned.<\/li>\n <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n\n<h4>Minimum Requirements<\/h4>\n<ul>\n <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n <li>Will be required to operate material handling equipment.<\/li>\n <li>High school diploma or equivalent required.<\/li>\n <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n <li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n <li>Will be exposed to extreme noise from operating equipment.<\/li>\n <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n <li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n <li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n\n<h4>Preferred Qualifications<\/h4>\n<ul>\n <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n <li>Ideal candidate will have training as a USAF AGE, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Job overview</h4> <p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <h4>Principal accountabilities</h4> <ul> <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.</li> <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.</li> <li>Prepares AGE/FLSE and other equipment for exercises or actual deployments.</li> <li>Responds to enquiries concerning storage and status of assigned equipment.</li> <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.</li> <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.</li> <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.</li> <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.</li> <li>Orients new personnel to work crews, plans work assignments and establishes work methods.</li> <li>Conducts on-the-job training for AGE mechanics on assigned AGE/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.</li> <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.</li> <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.</li> <li>Prepares and submits quality/material deficiency reports and technical order changes as required.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.</li> <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Ensures that the work area is maintained to the highest standards of cleanliness.</li> <li>Attends AGE staff meetings as required.</li> <li>Prepares personnel performance reports as assigned.</li> <li>Performs TDY within the area of operations as required by the US Air Force/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</li> <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>Will be required to operate material handling equipment.</li> <li>High school diploma or equivalent required.</li> <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.</li> <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.</li> <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.</li> <li>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</li> <li>Will be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.</li> <li>Ideal candidate will have training as a USAF AGE, RED X certified inspector.</li> </ul> <h4>Compensation details</h4> <p>Hourly plus additional incentives.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting date: 05/04/2026 - Until filled.</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <h4>Equal opportunity statement</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job overview</h4> <p>The chief AGE mechanic supervises, trains AGE technicians and performs inspections, maintenance and servicing and storage of assigned AGE. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven AGE. Responsible for the day-to-day AGE shop operations and communicates with the AGE superintendent to assure work priorities are met. Accomplishes work in accordance with USAF/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <h4>Principal accountabilities</h4> <ul> <li>Primary supervisor to train AGE mechanics and perform periodic inspection, maintenance and repair actions on assigned AGE assets.</li> <li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.</li> <li>Prepares AGE/FLSE and other equipment for exercises or actual deployments.</li> <li>Responds to enquiries concerning storage and status of assigned equipment.</li> <li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.</li> <li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.</li> <li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.</li> <li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.</li> <li>Orients new personnel to work crews, plans work assignments and establishes work methods.</li> <li>Conducts on-the-job training for AGE mechanics on assigned AGE/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.</li> <li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.</li> <li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.</li> <li>Prepares and submits quality/material deficiency reports and technical order changes as required.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of HAZMAT when required.</li> <li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Ensures that the work area is maintained to the highest standards of cleanliness.</li> <li>Attends AGE staff meetings as required.</li> <li>Prepares personnel performance reports as assigned.</li> <li>Performs TDY within the area of operations as required by the US Air Force/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</li> <li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>Will be required to operate material handling equipment.</li> <li>High school diploma or equivalent required.</li> <li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.</li> <li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.</li> <li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.</li> <li>Must be able to obtain and maintain facility credentials/authorization. Note: US citizenship is required for facility credentials/authorization at this work location.</li> <li>Will be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.</li> <li>Ideal candidate will have training as a USAF AGE, RED X certified inspector.</li> </ul> <h4>Compensation details</h4> <p>Hourly plus additional incentives.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting date: 05/04/2026 - Until filled.</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <h4>Equal opportunity statement</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>About the opportunity<br><ul><li>Monitor and report on Fleet Partner Rider activity within allocated zones, flagging suspicious behaviour and potential fraud cases to the Supervisor for escalation.</li><li>Support the day-to-day operational compliance of Fleet Partner Riders, ensuring adherence to platform policies and standard operating procedures.</li><li>Assist in the execution of anti-fraud controls during live operations, identifying anomalies and escalating findings in a timely manner.</li><li>Conduct regular on-ground site visit audits and spot checks across allocated zones to verify Fleet Partner Rider behaviour and operational compliance.</li><li>Act as a point of contact for Fleet Partner Riders on compliance-related queries, ensuring clear and consistent communication of policies and expectations.</li><li>Support the end-to-end process for Fleet Partner Rider-level cancellation fraud, contributing to data gathering, documentation, and follow-up actions.</li><li>Maintain accurate and up-to-date records of compliance incidents, fraud cases, and audit findings, ensuring proper documentation at all times.</li><li>Provide regular updates to the Supervisor on operational compliance status, open cases, and any emerging patterns observed on the ground.</li><li>Collaborate with internal teams as directed, supporting cross-functional initiatives related to fraud</li><li>and operational compliance.</li><li>Adhere to and support the continuous improvement of fraud detection and operational compliance</li><li>SOPs, flagging recommendations to the Supervisor.</li><li>Assist in the execution of special compliance and fraud-related projects, meeting agreed timelines and quality standards.</li><li>Support wider operations and team requirements as directed by the Supervisor or line management.</li></ul><br>What you need to be successful<br><ul><li>Bachelor's Degree</li><li>2-3 years of experience in food/grocery tech industry is highly preferred.</li><li>Proficient in Google Suite tools like GDoc, GSheet, GSlides, GForms etc.</li><li>Strong communication skills, both written and verbal. English and Arabic is a must. Urdu is a plus.</li><li>Influencer and a negotiation with good public speaking and presentation skills.</li><li>&nbsp;People management skills: Experience of managing bigger group of people.</li></ul><br>Who we are<br><p>Talabat is part of the Delivery Hero Group, the world’s pioneering local delivery platform, our mission is to deliver an amazing experience—fast, easy, and to your door. We operate in around 65 countries worldwide. Headquartered in Berlin, Germany. Delivery Hero has been listed on the Frankfurt Stock Exchange since 2017 and is part of the MDAX stock market index.</p><br><br> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <p> </p> <p> </p> <div> <strong>POSITION DESCRIPTION:</strong> <strong>Position Title:</strong> Sr. Instrument Technician<br><strong>Reports to:</strong> Instrument Supervisor<br><strong>Department:</strong> Maintenance and Operation Department<br><strong>Location:</strong> Duqm/Ras Markaz<br></div> <p> <strong> </strong> </p> <div> <strong>JOB PURPOSE:</strong> <p>Take job order for maintenance services and overhauls of all Instrumentation &amp; Control equipment and related systems like Compressors, pumps, generators, tanks system and any rotating or static equipment located in the Terminal. In addition, to ensure maintenance activities are carried out as planned within preset time, high quality and as per HSE standards in order to maintain high reliability &amp; availability of Instrument equipment.</p> <p>The position will act in accordance with OTTCO s Mission, Vision, Values &amp; Strategies, as well as, policies,</p> <p>guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p> </div> <p> <strong> </strong> </p> <div> <strong>REPORTING STRUCTURE:</strong> <p> <strong>Number of Staff Supervised</strong> </p> <p> <strong>Direct Reports:</strong> </p> <p> <strong>0</strong> </p> <p> <strong>Total:</strong> </p> <p> <strong>0</strong> </p> </div> <p> <strong> </strong> </p> <div> <strong>KEY RESPONSIBILITIES:</strong> <p> </p> <p> <strong>Responsibilities</strong> </p> <ul> <li>Perform all Instrumentation activities role in Tank Terminal Industry &amp; Duqm Petrochemical Terminal.</li> <li>Prepare and signatory for Permit to Work activities within area of responsibility as licensed and advised by Supervisor and perform operations and maintenance activities in accordance with established company Quality Systems and manufacturers' practices and procedures.</li> <li>Ensure the availability of instrumentation, analyzers, control systems, and communication systems in the area, including the best work practices in maintenance.</li> <li>Install, maintain, repair, overhaul, calibrate, and test various industrial instruments such as control valves, transmitters, DCS, Fire and Gas Systems, ESD systems, and pressure controls.</li> <li>Preform and control all work related to instrument maintenance and calibration and analyze periodic maintenance reports to improve section efficiency.</li> <li>Maintain all instrumentation drawings in as-built condition and ensure any modifications are reflected accurately.</li> <li>Update, maintain detailed records of maintenance, calibration, and repair activities. Document any modifications made to systems and update technical manuals and drawings as necessary.</li> <li>Report any failures of safety-critical elements as per OTTCO standards and oversee the instrumentation side in all assigned locations.</li> <li>Maintain a high level of safety awareness and standards in all daily duties and tasks and guide the subordinate staff on safe working practices.</li> <li>Report daily activity status and work progress to the Instrument Supervisor and assist in planning, coordinating, and controlling instrumentation work activities.</li> <li>Continuously review Instrumentation and Control equipment to identify improvements in operability, reliability, safety, and integrity, and provide written feedback to the Instrument Supervisor.</li> <li>Maintain close communication with the Instrument Supervisor prior to work execution and support them by providing leadership, mentoring, and training to Instrument Technicians.</li> <li>Coordinate and supervise the work of Instrument Technicians and any sub-contractors personnel working on the terminal facilities associated with the Instrument &amp; Control facilities.</li> <li>Promptly respond to callouts for any system or equipment failures, ensuring timely resolution of issues to minimize downtime and maintain operational efficiency.</li> <li>Implement the Preventive Maintenance (PM) plan, manage work backlogs and maintain the maintenance KPI.</li> <li>Ensure that instrumentation maintenance history and reports are updated in SAP (CMMS), maintenance digitalization and critical issues and repetitive failures by implementing Root Cause Analysis (RCA) recommendations.</li> <li>Provide technical support during plant shutdowns</li> <li>Participate in instrumentation-related projects, including upgrades, retrofits, and new installations.</li> <li>Train and mentor junior technicians, providing guidance and support to help them develop their skills and knowledge.</li> <li><br></li> </ul> </div> <p> <strong> </strong> </p> <p> </p> <div> <strong>QUALIFICATIONS, EXPERIENCE, &amp; SKILLS: </strong> <p> </p> <ul> <li>Minimum Qualifications for this position is Diploma in Instrumentation and Control Engineering or equivalent.</li> <li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li> <li>5+ years of experience in Instrumentation and Control Maintenance activities preferably at Oil and Gas Industry</li> <li>Background in Instrumentation maintenance best practices.</li> <li>requirements, Oil/Gas process &amp; systems procedures and practices</li> <li>A good knowledge of relevant operations, HSE requirements, Oil/Gas process &amp; systems procedures and practices.</li> <li>Ability to perform as a team player.</li> <li>Self-motivated and dependable, demonstrating strong initiative.</li> <li>Ability to perform as a team player.</li> <li>Ability to deal with change and demonstrate flexibility as required</li> </ul> </div> <p> </p> <p> <strong> </strong> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As Kids Club Supervisor, you will be responsible for the following duties:</p><p>Participate in the smooth running of the Kids department on a day-to-day basis to achieve the highest possible levels of guest satisfaction. Manage the smooth operations of the Kids Club effectively on a day-to-day basis to achieve the highest possible levels of guest satisfaction. This includes covering the reception area when required and supervising the team in the absence of the Kids Club Manager. Handles guest complaints and follows correct reporting procedures and follows up with guest satisfaction. Support FLHSS management and have a deep understanding of all related processes &amp; procedures for the area. To ensure hazards and malfunctioning, improperly working equipment is reported in a timely manner to management/IT/Engineering. Be confident user of the hotel operational systems such as in HMS, SCM, Alice Conduct the Kids Club Inventory twice per month, monitor the required quantity or stationery items. Train and develop the Kids Club attendants along with the Kids Manager, create a monthly L&amp;D calendar. Create new, unique and interesting activities that draw upon the best cultural, sporting or other offerings of the area in which the hotel is located. Help make the kids offering a point of competitive advantage for the hotel. Ensure any outsourced service provides maintenance standards. To have a complete knowledge of the products and services offered by the hotel, and particularly all the kids club activities in the hotel. Execution of the kids activities programme. Ensure that all activities are performed in a safe environment using proper safety techniques. Use qualified attendants in all areas where relevant qualifications are required, i.e. Lifeguard. Monitor the success of the activities programs through the number of participants and through guests feedback. Make necessary adjustments to maintain top quality, fun filled and original programs for hotel guests and kids. Prepare and circulate clear information to guests of the events offered by the hotel in conjunction with Mandarin Oriental Muscat Concierge. Keep all equipment clean and well maintained in the kids club. Develop and maintain a strong working environment with the other departments. Ensure proper accounting procedures are followed when collecting of charging fees for the Kids club Drive revenues for the department.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>As Kids Club Supervisor, we expect from you:</p><ul><li>Must have at least 2 years experience working with children in a hotel or resort</li><li>Must be fluent in English both written and verbal</li><li>Must be flexible and have a good sense of humour</li><li>Must be a strong communicator</li><li>Obtain the Pediatric First Aid and CPR certification</li><li>Fluent in English both written and verbal</li></ul><p>Our commitment to you</p><ul><li>Learning &amp; Development. Your success is our success. We craft unique learning and development programmes for various stages in your career so that you grow, continuously.</li><li>MOstay. When you work as hard as our colleagues do, it's important to take time off. As a member of the #MOfamily, you can stay with us wherever you go in the world. The MOstay programme offers complimentary nights and additionally attractive rates on rooms for you and your loved ones.</li><li>Heath &amp; Colleague Wellness. Finding the right work-life balance is important. Your wellbeing matters to us. A variety of health benefits and wellness programmes are offered to all our colleagues, globally.</li></ul><p>We're Fans. Are you?</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>JOB PURPOSE: To safely and efficiently operate forklifts and related material handling equipment in support of scaffolding, utility services, civil maintenance activities and environmental management within the shipyard. The role ensures timely movement of materials, tools, waste, and equipment while maintaining compliance with safety and environmental standards. REPORTING STRUCTURE: Description To operate a 3~32 tons forklift for loading and unloading of all type of materials as required, and also to carry out the regular inspection/lubricating of the equipment and working with plant operators/technicians in order to make sure the different types of products are stocked properly in the facility and equipment s are maintained/operated as per established standards of HSSE/ROP. Operate forklifts (including heavy-capacity and rough terrain units) to transport scaffolding materials, civil construction materials, utility equipment, environmental waste containers, and operational supplies. Load and unload trucks, containers, and storage areas safely and efficiently. Support scaffolding teams by delivering and retrieving scaffolding components and platforms. Assist Utility and Civil Maintenance teams with movement of pipes, cables, concrete materials, and maintenance tools. Transport waste materials and environmental containers in compliance with environmental regulations. Conduct daily pre-operation inspections and complete safety checklists. Report equipment defects and coordinate maintenance requirements. Ensure proper load securing and safe stacking practices. Follow shipyard safety policies, PPE requirements, and environmental protection procedures. Maintain housekeeping standards in assigned work areas. Assist other operational tasks as directed by the supervisor. COMMUNICATIONS &amp; WORKING RELATIONSHIPS:</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><div>QUALIFICATIONS, EXPERIENCE &amp; SKILLS: Minimum Qualifications: High School Diploma or equivalent. Valid Forklift Operator Certification. Minimum Experience: Minimum 1 year of forklift operating experience in shipyard, marine, construction, or heavy industrial environment. Job-Specific Knowledge &amp; Skills: Knowledge of shipyard safety standards and safe material handling practices. Experience handling heavy and oversized loads. Understanding of environmental compliance requirements for waste handling. Ability to work in outdoor and high-risk environments. Good communication and teamwork skills. Basic equipment inspection and maintenance knowledge.</div><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <p> </p> <div> <strong>POSITION DESCRIPTION:</strong> <strong>Position Title:</strong> Mechanical Supervisor<br><strong>Reports to:</strong> Mechanical Lead<br><strong>Department:</strong> Maintenance Department<br><strong>Location:</strong> All OTTCO Terminals<br></div> <p> </p> <div> <strong>JOB PURPOSE:</strong> <p>Perform operations and maintenance of all mechanical systems and equipment across OTTCO s terminals, including pumps, compressors, valves, pipelines, tanks, and other static and rotating machinery. Ensure all mechanical maintenance and inspection activities are carried out efficiently, safely, and in accordance with approved company procedures, industry standards, and OEM recommendations to achieve maximum equipment reliability and asset integrity.</p> <p>The position will operate in alignment with OTTCO s Mission, Vision, Values, and Strategies, ensuring adherence to company policies, HSE regulations, and applicable Omani legal and environmental requirements. The incumbent shall promote operational excellence, continuous improvement, and sustainability through the application of best international practices supported by modern maintenance systems and technologies.</p> </div> <p> <strong> </strong> </p> <div><br> </div> <p> <strong> </strong> </p> <div> <strong>KEY RESPONSIBILITIES:</strong> <p> <strong>Operation &amp; Maintenance</strong> </p> <p> <span> <span> </span> </span>Perform preventive, corrective, and predictive maintenance of mechanical systems including pumps, compressors, tanks, valves, pipelines, and associated static/rotating equipment.</p> <p> <span> <span> </span> </span>Supervise all mechanical maintenance and repair activities to ensure they are conducted safely and in line with approved procedures, work instructions, and OEM standards.</p> <p> <span> <span> </span> </span>Lead and support troubleshooting of mechanical faults and equipment breakdowns, ensuring timely restoration and minimal production impact.</p> <p> <span> <span> </span> </span>Validate and enter all mechanical maintenance activities into the CMMS (SAP/Maximo or equivalent) and ensure proper record keeping.</p> <p> <span> <span> </span> </span>Conduct periodic inspections of mechanical facilities to identify issues, deterioration, or nonconformities requiring intervention.</p> <p> <span> <span> </span> </span>Supervise and certify equipment alignment, vibration analysis, balancing, and other critical maintenance activities. Coordinate with Operations for equipment isolation, handover, and recommissioning to ensure safe execution of maintenance work.</p> <p> <span> <span> </span> </span>Attend Daily operation-maintenance coordination meeting, YTT, and other departmental meetings.</p> <p> <span> <span> </span> </span>Participate and support in root cause analysis (RCA) for major equipment failures and implement corrective and preventive actions to avoid recurrence.</p> <p> <span> <span> </span> </span>Participate in shutdown/turnaround planning and execution, ensuring all mechanical activities are completed safely, on time, and within budget.</p> <p> <span> <span> </span> </span>Closely monitor and verify that all work order closures are completed to a high standard, with clear documentation and all required supporting attachments.</p> <p> <span> <span> </span> </span>Monitor, maintain, and continuously improve departmental KPIs by tracking performance metrics, analyzing trends, and implementing corrective actions to ensure alignment with operational targets and company objectives.</p> <p><br></p> </div> <p> <strong> </strong> </p> <p> </p> <div> <strong>QUALIFICATIONS, EXPERIENCE, &amp; SKILLS: </strong> <p> <span> <span> </span> </span>Bachelor s Degree in Mechanical Engineering or equivalent from a recognized university. </p> <p> <strong>Experience</strong> </p> <p> <span> <span> </span> </span>Minimum +6 years of experience in mechanical maintenance within tank terminal, oil &amp; gas, refinery, or petrochemical sectors.</p> <p> <span> <span> </span> </span>Demonstrated expertise in rotating equipment, mechanical seals, alignment, piping systems, and static equipment (tanks, pressure vessels, exchangers).</p> <p> <span> <span> </span> </span>Proven track record in supervision of EPC and maintenance contractors during shutdowns and major overhauls.</p> <p> <span> <span> </span> </span>Strong exposure to mechanical integrity programs, inspection schedules, and reliability analysis.</p> <p> <span> <span> </span> </span>Working knowledge of international standards such as API 610/650/682, ASME, ASTM, and ISO.</p> <p> <strong>Professional Certifications</strong> </p> <p> <span> <span> </span> </span>Authorized Mechanical/Rotating Equipment Maintenance Certification (where applicable).</p> <p> <span> <span> </span> </span>Training in Root Cause Analysis (RCA), Reliability Centered Maintenance (RCM), or Vibration Analysis is preferred.</p> <p> <span> <span> </span> </span>HSE or PTW certifications such as NEBOSH/IOSH are desirable.</p> <p> <span> <span> </span> </span>Familiarity with SAP or CMMS systems for maintenance management is advantageous.</p> <p> <strong>Technical Competencies</strong> </p> <p> <span> <span> </span> </span>Deep knowledge of pumps, compressors, valves, hydraulic systems, HVAC, and pipeline systems.</p> <p> <span> <span> </span> </span>Proficient in interpreting P&amp;IDs, isometric drawings, and mechanical schematics.</p> <p> <span> <span> </span> </span>Skilled in troubleshooting, root cause analysis, and reliability improvement methodologies.</p> <p> <span> <span> </span> </span>Familiarity with corrosion mechanisms, mechanical integrity inspections, and cathodic protection systems.</p> <p> <span> <span> </span> </span>Capable of planning, scheduling, and managing shutdown and turnaround activities.</p> <p> <strong>Behavioral Competencies</strong> </p> <p> <span> <span> </span> </span>Strong leadership, problem-solving, and decision-making skills.</p> <p> <span> <span> </span> </span>Excellent coordination and communication across multidisciplinary teams.</p> <p> <span> <span> </span> </span>Proactive and detail-oriented, with a strong sense of accountability and ownership.</p> <p> <span> <span> </span> </span>High commitment to HSE culture and continuous improvement.</p> <p> <span> <span> </span> </span>Ability to work effectively under pressure and manage multiple priorities.</p> <p> <span> <span> </span> </span>Demonstrates integrity, professionalism, and alignment with OTTCO s corporate values and strategic vision.</p> </div> <p> <strong> </strong> </p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION DESCRIPTION: Position Title: Mechanical Technician Reports to: Mechanical Supervisor Department: Maintenance and Operations Department Location: Duqm/ Ras Markaz </p><p>JOB PURPOSE: Carry out preventive, corrective, and predictive maintenance of all mechanical systems and equipment across OTTCO s terminals, including pumps, compressors, valves, tanks, piping systems, HVAC units, and other static and rotating machinery, to ensure continuous and reliable operation of all facilities. </p><p>The position ensures that all maintenance and repair activities are performed in compliance with OTTCO s maintenance procedures, HSE policies, OEM recommendations, and international standards, supporting operational reliability and mechanical integrity of terminal assets. </p><p>REPORTING STRUCTURE: Number of Staff Supervised Direct Reports: 0 Total: 0 </p><p>KEY RESPONSIBILITIES: </p><p>Operations &amp; Maintenance </p><p>Perform preventive and corrective maintenance on mechanical systems including pumps, compressors, gearboxes, valves, piping networks, and pressure vessels. </p><p>Dismantle, inspect, and assemble rotating equipment during scheduled and unscheduled maintenance. </p><p>Conduct alignment, balancing, lubrication, and vibration monitoring as per preventive maintenance plans. </p><p>Assist in troubleshooting equipment failures and identify root causes in coordination with the Mechanical Supervisor. </p><p>Carry out routine inspections to detect leaks, abnormal noise, vibration, or wear in mechanical components. </p><p>Support maintenance and inspection of static equipment such as tanks, exchangers, and pipelines. </p><p>Perform mechanical isolations, tagging, and reinstallation in accordance with PTW and safety procedures. </p><p>Update maintenance job cards, inspection findings, and work completion details in the CMMS (SAP/Maximo) system. </p><p>Participate in start-up, shutdown, and major overhaul activities as per approved maintenance plans. </p><p>Project &amp; Technical Support </p><p>Assist in installation, commissioning, and modification of mechanical equipment for ongoing projects or upgrades. </p><p>Participate in inspection and quality verification of mechanical works carried out by contractors. </p><p>Ensure installations comply with design drawings, mechanical standards, and project specifications (API, ASME, ASTM, ISO). </p><p>Provide site feedback on equipment condition and improvement opportunities to enhance reliability and maintainability. </p><p>Safety &amp; Compliance </p><p>Follow OTTCO s HSE, Permit-to-Work (PTW), and mechanical isolation procedures at all times. </p><p>Conduct toolbox talks and ensure proper use of PPE, tools, and lifting equipment. </p><p>Identify and report unsafe acts, conditions, or potential hazards promptly. </p><p>Maintain mechanical workshops, pump stations, and maintenance areas in a clean and safe condition. </p><p>Ensure safe execution of lifting, rigging, and confined space activities as per approved procedures. </p><p>Participate in emergency drills and support plant safety initiatives. </p><p>Teamwork &amp; Coordination </p><p>Coordinate with Electrical, Instrument, and Operations teams to perform multidisciplinary maintenance activities. </p><p>Support supervisors during shutdowns, major overhauls, and turnaround campaigns. </p><p>Assist in mentoring and training junior technicians and contractors to maintain work quality and efficiency. </p><p>Participate in team meetings, planning sessions, and maintenance improvement workshops. </p><p>Documentation &amp; Reporting </p><p>Record daily work activities, inspection data, and equipment readings in job sheets or CMMS. </p><p>Maintain equipment history cards, lubrication charts, and spares consumption logs. </p><p>Report defects, performance issues, and material shortages to supervisors for timely action. </p><p>Support preparation of maintenance reports, failure analysis records, and spare parts lists. </p><p>Continuous Improvement </p><p>Recommend improvements to maintenance practices, procedures, and job plans. </p><p>Participate in root cause analysis (RCA) for repeated mechanical failures. </p><p>Support reliability and efficiency enhancement programs under the ETIZAAN initiative. </p><p>Identify cost-saving opportunities related to spare parts, lubrication, or resource utilization. </p><p>Perform any other duties or special assignments as directed by line management. </p><p>Familiarization with QHSE Policies, Objectives, procedures and its record maintenance </p><p>Awareness on Significant environmental aspects, Health and safety hazards, related actual and potential aspects and risks associated with their risk. </p><p>Awareness on Emergency preparedness and response measures. </p><p>Awareness on implications of not conforming to the integrated managements system requirements, including not fulfilling the organization s compliance obligations </p><p>Key interactions </p><p>Internal: Department Managers, Operations Shift Staff, SCM, TSD, Maintenance, HSE, Fire </p><p>External: OQ, SIPC, Surveying Companies, ROP and Civil Defence, gas companies, other contractors and suppliers as required. Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or National Vocational Qualification (NVQ) in Mechanical Engineering / Industrial Maintenance. </p><p>Professional Certifications </p><p>Authorized certification in Mechanical Maintenance / Rotating Equipment Maintenance. </p><p>HSE and PTW system certifications such as NEBOSH/IOSH preferred. </p><p>Training in Vibration Analysis, Alignment, and Rigging/Lifting Safety is advantageous. </p><p>CMMS (SAP) training and basic computer literacy preferred. </p><p>Experience </p><p>+5 years of hands-on experience in mechanical maintenance within oil &amp; gas terminals, refineries, or heavy industrial facilities. </p><p>Experience in servicing and maintaining centrifugal and positive displacement pumps, compressors, valves, and gearboxes. </p><p>Familiar with mechanical sealing systems, gaskets, and bolting procedures. </p><p>Experience in piping maintenance, leak repair, and hydrotesting. </p><p>Working knowledge of tanks, pressure vessels, exchangers, and HVAC systems. </p><p>Familiar with international standards such as API 610, 650, 682, ASME, and ASTM. </p><p>Technical Competencies </p><p>Skilled in dismantling, assembling, and aligning rotating machinery. </p><p>Proficiency in using precision tools (dial gauges, micrometers, torque wrenches, etc.). </p><p>Ability to interpret mechanical drawings, P&amp;IDs, and maintenance manuals. </p><p>Knowledge of lubrication practices, material compatibility, and corrosion prevention. </p><p>Capable of performing mechanical troubleshooting and identifying failure modes. </p><p>Familiar with safe rigging, lifting, and confined space work practices. </p><p>Behavioral Competencies </p><p>Safety-oriented with strong discipline and attention to detail. </p><p>Good communication and teamwork abilities across multi-discipline teams. </p><p>Capable of working under supervision and delivering high-quality workmanship. </p><p>Proactive, reliable, and committed to continuous improvement. </p><p>Upholds OTTCO s values of Safety, Integrity, Reliability, and Operational Excellence. </p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Bachelor of Technology/Engineering(Civil), Master of Technology/Engineering(Civil)</p><br><br><ul><li><p>Preparation of preliminaries based upon site condition, sources availability nearby like electricity &amp; water etc, machinery &amp; equipment and other Misc items required for the project.</p></li><li><p>To raise queries regarding the tender requirements such as BOQ, specifications, technicalities with corresponding consultants/ authorities and come to conclusion before tender submission.</p></li><li><p>Preparation of cost estimation and pricing for the project by preparing in detail list of activities to be executed &amp; rate build up of materials, labour, machinery, overheads and other misc expenses required for the project (in close coordination with the cost controller). Hence finalizing the tender amount.</p></li><li><p>To coordinate with Commercial, Finance &amp; Administration departments for necessary documents (such as tender bond, omanisation details, etc) required for submission.</p></li><li><p>• During Post Tender</p></li><li><p>To provide plan on how and when the work to be performed by developing a deliverable schedule to provide a road map that the construction team must stick to in order to finish the project in a timely and cost effective manner.</p></li><li><p>Approval of Subcontractor Agreements/ Work Orders /LPO whose value exceeding OMR 1,000 along with Commercial Head by reviewing the terms and conditions. In the absence of Quantity Surveyor, Business Head needs to approve the Agreements/Work Orders/LPO entered with Sub contractors.</p></li><li><p>Verifying the material requests received from the sites, before getting approval from Business Head. (To check whether the quantities requested for all the major items is as per requirement/budget).</p></li><li><p>Monitoring the cost of the projects on weekly basis and reporting to Business Head about the status of the project and corrective action to be taken by site in charge.</p></li><li><p>Coordinating with Draftsman and Site Engineers / Project Managers in drawing preparation for the sites and monitoring the Draft man work.</p></li><li><p>Preparation of Monthly Interim Payment Application &amp; project progress based on the work executed at site and submits to the consultants / client and followup for the approval.</p></li><li><p>Preparation of the variation order claim and new rate build (in close coordination with cost controller) to submittal and followup to final approval.</p></li><li><p>Preparation of delay analysis and maintaining record of Extension of Time (EOT) to further claim.</p></li><li><p>Preparation of Final measurement and other supporting and relevant document for settlement of Final Account.</p></li><li><p>Responsible to maintain the required documentation (such as client correspondence, invoices etc) for the project and should act as the custodian for the Project File (Paper documentation).</p></li><li><p>Any other work allotted by the Business Head as per the requirement of the project.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Quantity Surveying, Civil Engineering, or a related field from an accredited institution.</p></li><li><p>Minimum of 5 years of relevant work experience in the civil engineering sector, demonstrating progressive responsibility.</p></li><li><p><strong>OMAN experience is Must.</strong></p></li><li><p><strong>MINISTRY Experience is preferred.</strong></p></li><li><p>Preparation of preliminaries based upon site condition, sources availability nearby like electricity &amp; water etc, machinery &amp; equipment and other Misc items required for the project.</p></li><li><p>To raise queries regarding the tender requirements such as BOQ, specifications, technicalities with corresponding consultants/ authorities and come to conclusion before tender submission.</p></li><li><p>Preparation of cost estimation and pricing for the project by preparing in detail list of activities to be executed &amp; rate build up of materials, labour, machinery, overheads and other misc expenses required for the project (in close coordination with the cost controller). Hence finalizing the tender amount.</p></li><li><p>To coordinate with Commercial, Finance &amp; Administration departments for necessary documents (such as tender bond, omanisation details, etc) required for submission.</p></li><li><p>• During Post Tender</p></li><li><p>To provide plan on how and when the work to be performed by developing a deliverable schedule to provide a road map that the construction team must stick to in order to finish the project in a timely and cost effective manner.</p></li><li><p>Approval of Subcontractor Agreements/ Work Orders /LPO whose value exceeding OMR 1,000 along with Commercial Head by reviewing the terms and conditions. In the absence of Quantity Surveyor, Business Head needs to approve the Agreements/Work Orders/LPO entered with Sub contractors.</p></li><li><p>Verifying the material requests received from the sites, before getting approval from Business Head. (To check whether the quantities requested for all the major items is as per requirement/budget).</p></li><li><p>Monitoring the cost of the projects on weekly basis and reporting to Business Head about the status of the project and corrective action to be taken by site in charge.</p></li><li><p>Coordinating with Draftsman and Site Engineers / Project Managers in drawing preparation for the sites and monitoring the Draft man work.</p></li><li><p>Preparation of Monthly Interim Payment Application &amp; project progress based on the work executed at site and submits to the consultants / client and followup for the approval.</p></li><li><p>Preparation of the variation order claim and new rate build (in close coordination with cost controller) to submittal and followup to final approval.</p></li><li><p>Preparation of delay analysis and maintaining record of Extension of Time (EOT) to further claim.</p></li><li><p>Preparation of Final measurement and other supporting and relevant document for settlement of Final Account.</p></li><li><p>Responsible to maintain the required documentation (such as client correspondence, invoices etc) for the project and should act as the custodian for the Project File (Paper documentation).</p></li><li><p>Any other work allotted by the Business Head as per the requirement of the project.</p></li></ul><p>Desired Candidate Profile</p><ul><li><p>Bachelor’s degree in Quantity Surveying, Civil Engineering, or a related field from an accredited institution.</p></li><li><p>Minimum of 5 years of relevant work experience in the civil engineering sector, demonstrating progressive responsibility.</p><br></li></ul><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Building Construction project only </p></li><li><p>OMAN experience is Must.</p></li><li><p>MINISTRY Experience is preferred.</p></li></ul><p></p></section>