وظائف مدير مصنع في سلطنة عمان

<p>To support the implementation of Health, Safety, and Environment (HSE) policies, procedures, and programs on-site, ensuring day-to-day compliance with legal and organizational requirements. The HSE Officer is responsible for conducting inspections, supporting incident investigations, delivering toolbox talks, and promoting a safe, healthy, logistic plans and environmentally responsible workplace under the guidance of the HSE Manager, once onboard.</p><p><b>KEY ACCOUNTABILITIES AND RESPONSIBILITIES</b></p><ul><li>Conduct regular safety inspections and risk assessments to identify potential hazards in the workplace. Ensure that identified hazards are reported and addressed through corrective actions. Able to make a Risk Assessment form as per regular safety inspections.</li><li>Support day-to-day compliance with health and safety laws, regulations, and standards at the site/work location. Keep up to date with health and safety legislation and industry s best practices.</li><li>Assist the HSE Manager in implementing and reviewing health and safety policies, procedures, and programs at the site level.</li><li>Deliver toolbox talks and safety training/inductions for employees on proper use of equipment, emergency protocols, first aid, and other relevant health and safety topics. Organize drills, such as fire drills, to ensure readiness in emergencies</li><li>Support the investigation of accidents, near misses, and safety-related incidents, and help determine causes and propose corrective actions. Maintain detailed records of incidents and accidents.</li><li>Prepare Daily, Weekly and Monthly HSE Reports on health and safety performance, including accident rates, safety inspections, and training records, and submit to the HSE Manager. Maintain records of all safety-related documentation for compliance purposes.</li><li>Support the implementation of emergency response procedures (e.g., fire, chemical spills, medical emergencies). Ensure that all employees are aware of and trained in emergency procedures.</li><li>Monitor the correct use of safety equipment and ensure that appropriate PPE is available to employees and inspection, and maintenance of Personal Protective Equipment (PPE). Regularly inspect safety equipment for maintenance and replace damaged items</li><li>Work closely with managers, supervisors, and employees to foster a safety culture. Recommend improvements to workplace safety practices and culture. Stay informed about new safety technologies and practices that can enhance workplace safety.</li><li>Conduct and report daily and weekly to the HSE Manager on HSE toolbox talks and site walkarounds to ensure ongoing compliance and hazard identification.</li><li>Investigate accidents, incidents, near misses, and unsafe conditions, and prepare detailed investigation reports with recommendations.</li><li>Monitor high-risk activities, including excavation, lifting operations, work at height, confined space entry, hot work, and electrical work.</li><li>Inspect firefighting equipment, first aid facilities, emergency exits, and welfare facilities to ensure readiness and compliance.</li><li>Monitor housekeeping standards, waste management practices, environmental protection measures, and pollution prevention controls.</li><li>Maintain accurate HSE records, inspection reports, incident reports, training records, and statutory documentation.</li><li>Conduct regular HSE audits and inspections to verify compliance with company procedures, client requirements, and applicable legislation.</li><li>Follow up on corrective and preventive actions to ensure timely closure of identified findings.</li><li>Promote a positive safety culture through effective communication, coaching, employee engagement, and continuous improvement initiatives.</li><li>Ability to work independently and effectively within multidisciplinary teams</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma or Bachelor's degree in health and safety, environmental, occupational health, or a related field/equivalent.</li><li>Professional HSE certification such as IOSH Managing Safely or NEBOSH International General Certificate (IGC) is preferred</li><li>Bachelor with minimum 7 years of experience in a health and safety role, preferably in a similar industry (Facilities management/Construction)</li><li>Diploma with minimum 10 years of experience in a health and safety role, preferably in a similar industry (Facilities management/Construction)</li><li>Experience in construction or high-rise building projects is an advantage</li><li>Familiarity with international HSE management standards, including ISO 45001 (Occupational Health and Safety) and ISO 14001 (Environmental Management).</li><li>Proficiency in Microsoft Office applications, including Word, Excel, PowerPoint, and Outlook.</li><li>Good command of written and spoken English language skills is an advantage.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Functions: Review subcontractor scope of work and ensure alignment with project requirements. Receive and verify invoices from subcontracting companies. Prepare necessary documents to process subcontractor payments. Compare subcontractor billing (man-hours) against Purchase Orders and approved rates. Monitor subcontractor productivity, performance, and compliance with contractual obligations. Maintain and update standard subcontracting tariffs related to ship repair activities. Prepare subcontractor evaluations and regular progress reports. Provide complete and accurate reports to superiors in a timely manner. Address and escalate any conflicts or non-compliance issues promptly. Keep subcontractor-related department records well-organized and up to date. Ensure all subcontractor communications and documentation are handled with strict confidentiality. Attend to other tasks assigned by the Line Manager as required.</p><p>Policies, Systems, Processes &amp; Procedures Follow all relevant departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.</p></div></section>

<p>Purpose : As part of the Quality Control function, being responsible to implement all aspects related to quality within the Operations section of the Company. Summary of the Job Role : To implement quality within the Operations and in line with the quality plan, specifications &amp; overall business plan. Authorities : Financial None. People None. Operational None. Key Deliverables : Prepare test certificates as required by the Sales and Marketing department of OCI. Assist the QC Manager and Assistant Manager in all third-party inspections of the finished goods in conjunction with the Customer Support Service department. Ensure that the drums are arranged and scheduled for in the testing area of OCI. Assist in testing and final packaging of materials at OCI. Assist in testing of raw materials for manufacturing at OCI. Ensure all cables manufactured are tested strictly according to the OCIs, clients, national and international specifications, and ensure they are fully compliant before dispatch from the Company premises. Ensure the quality test plan is performed according to the clients requirements and in its absence within the company requirements. Assist in performing Internal Test Type plan on the cables manufactured in a timely manner. Prepare periodic reports to the management with regards to the material consumption, weight analysis, etc. Relationships (Internal) : Production, Logistic, Procurement, Finance. Relationships (External) : Customers, suppliers, Government / related ministries</p><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications</h2><p>A Diploma in Electrical engineering.</p><h2>Skills/Knowledge</h2><ul><li>Good understanding of cable manufacturing operation and technology.</li><li>A hand on cable manufacturing analysis is must.</li><li>Knowledge of different methods testing, international standards, Computer literacy especially MS-Office.</li><li>Good interpersonal and communication skills.</li><li>Knowledge of the properties of the materials especially metals, polymers, etc.</li><li>Ability to perform under pressure.</li><li>Good problem-solving skill and quick decision making.</li><li>Knowledge of requirements of testing as per BS and ICE systems.</li></ul><h2>Experience</h2><p>3+ years of experience in cable manufacturing facility QC.</p><h2>Business Understanding</h2><p>Good knowledge of cable industry.</p>

<p><h4>Position objective</h4> <p>The position is responsible to represent the brand by maximizing and contributing to the sales within the store through exceptional customer service and retail experience.</p> <p>Perform various operational duties such as store maintenance and visual presentation standards as assigned by the store manager/assistant store manager.</p> <h4>Key responsibilities</h4> <p><strong>Customer service:</strong></p> <ul> <li>Greet the customers and assist them in selecting the right product.</li> <li>Convert the window shoppers to ultimate buyers.</li> <li>Promote the Club Apparel Loyalty Program of the company for repeat sales.</li> <li>Serve customers with the highest standards and follow the company guideline of selling (GUEST – Greet, Understand, Explain, Sell, Thank).</li> <li>Must be updated about the various brands of the group for suggestive selling to the customers.</li> </ul> <p><strong>Grooming / attitude / knowledge:</strong></p> <ul> <li>Must be presentable and well-groomed at all times.</li> <li>Flexible to work for extended hours during the sale period.</li> <li>Must possess up-to-date product knowledge and ensure minimal stock loss.</li> <li>Flexible to work for extended hours during the sale period.</li> </ul> <p><strong>Merchandise:</strong></p> <ul> <li>Ensure all stock is laid out and displayed in order to attract customers and also as per standard layout norms.</li> <li>Ensure all VM guidelines are followed and all stock norms on clearance are maintained.</li> <li>Record the inventory inward/outward and maintain the report of the same.</li> </ul> <p><strong>Process:</strong></p> <ul> <li>Handle the POS (Point of Sale) / billing counter efficiently.</li> <li>Tally money in the cash till during the beginning/end of the shifts.</li> <li>Issue receipts, refunds, and change to the customers correctly.</li> <li>Process the payments by cash, credit cards, vouchers, or automatic debits.</li> <li>Ensure awareness and vigilance at all times of security in the store without any negligence.</li> <li>Must be flexible to work for varied shifts and overtime as per the business requirement.</li> <li>Adhere to SOP and loss prevention policies.</li> <li>Maintain confidentiality of the sales figures to outside parties.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Sales &amp; Profitability</p><ul><li><p>Achieve departmental sales targets and maintain required profit margins.</p></li><li><p>Monitor daily sales performance and report variances to Branch Manager.</p></li><li><p>Coordinate with management to liquidate slow moving items or return them to suppliers.</p></li></ul><p>Supplier Negotiation &amp; Benefits</p><ul><li><p>Negotiate with suppliers to secure rental income, rebates, and promotional support.</p></li><li><p>Ensure supplier agreements benefit the company and align with profitability goals.</p></li><li><p>Collaborate with procurement teams to prioritize fast moving and seasonal items.</p></li></ul><p>Stock &amp; Ordering</p><ul><li><p>Monitor daily ordering of fast moving food items to ensure availability.</p></li><li><p>Track demand trends and adjust ordering accordingly.</p></li><li><p>Maintain expiry sheets for all food items and ensure timely clearance of expired stock.</p></li></ul><p>Category Management &amp; Merchandising</p><ul><li><p>Implement proper category management to optimize shelf space and product visibility.</p></li><li><p>Ensure departmental displays and merchandising comply with company standards.</p></li><li><p>Guarantee all items are scannable and correctly priced on shelves.</p></li><li><p>Prepare and update shelf price tags regularly.</p></li></ul><p>Quality &amp; Hygiene Control</p><ul><li><p>Maintain cleanliness and hygiene of shelves and food storage areas.</p></li><li><p>Monitor and update temperature sheets for chillers and freezers daily.</p></li><li><p>Ensure fresh items meet quality standards to avoid customer complaints.</p></li></ul><p>Customer Service</p><ul><li><p>Support excellent customer service by ensuring product availability and correct pricing.</p></li><li><p>Resolve customer complaints related to food items promptly and professionally.</p></li><li><p>Assist in promotional campaigns and seasonal events for the grocery department.</p></li></ul><p>Reporting &amp; Coordination</p><ul><li><p>Provide daily reports on sales, stock availability, and supplier negotiations.</p></li><li><p>Coordinate with Branch Manager and General Manager on departmental performance.</p></li><li><p>Escalate operational issues and recommend corrective actions.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Business Administration, Retail Management, or related field.</p></li><li><p>Minimum 5 years of experience in grocery/food retail operations.</p></li><li><p>Strong knowledge of category management, merchandising, and supplier negotiations.</p></li><li><p>Proficiency in ERP/POS systems and MS Office applications.</p></li><li><p>Excellent organizational and analytical skills.</p></li><li><p>Ability to thrive in a high volume, fast paced environment.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Supervise and coordinate activities of cooks and workers. Determine how food should be presented and create decorative food displays. Ensure proper portion, arrangement, and food garnish to be served. Monitor the quantity of food that is prepared. Inform Food &amp; Beverage service staff of menu specials and out of stock menu items. Prepare special meals or substitute items. Assist cooks and kitchen staff with various tasks. Provide cooks with needed items. Monitor stock of kitchen supplies and food. Maintain kitchen logs for food safety program and food products. Ensure the quality of the food items and notify manager if a product does not meet specifications. Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Address guests service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards. Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: Technical, Trade, or Vocational School Degree. Related Work Experience: 4 to 6 years of related work experience. Supervisory Experience: At least 2 years of supervisory experience. License or Certification: None</p><p></p></section>

<p>Roles and Responsibilities Batching Plant Maintenance Supervisor required for the leading Readymix Company in Oman. It is a fully owned subsidiary of a multi-disciplinary Engineering, Contracting and Construction Company, the largest in the private sector in the Sultanate of Oman.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Should have atleast 5 years as Batching Plant Maintenance Supervisor in RMC Plant.</li><li>Also have experience in Mekha Plant / Elba, Schwing Stetter, and Liebherr systems.</li></ul>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Drawings &amp; Designs is responsible for the development, management, control, and continuous improvement of all engineering drawings, technical documentation, plant design records, and engineering change processes across the mining and processing operations. The role ensures that all engineering drawings, as-built documentation, layouts, schematics, and design data are accurate, current, compliant with applicable engineering standards, and readily available to support safe, reliable, and efficient operation of plant assets. The position provides technical leadership for engineering design activities, drawing management systems, plant modifications, engineering change management (MOC), document control coordination, multidisciplinary design reviews, and digital engineering initiatives. The role supports maintenance, operations, projects, shutdowns, and capital development activities by ensuring engineering documentation integrity and effective design governance throughout the asset lifecycle.</p> <p> </p> <p><b>Detailed Description </b></p> <p>DRAWINGS AND DESIGN MANAGEMENT</p> <p>Develop, review, and manage engineering drawings including mechanical, structural, piping, electrical, instrumentation, civil, architectural, and process drawings.</p> <p>Ensure all engineering drawings are maintained accurately and updated to reflect plant modifications and as-built conditions.</p> <p>Establish and maintain engineering drawing standards, drafting procedures, templates, and design guidelines.</p> <p>Ensure consistency and compliance with applicable international standards, company requirements, and OEM specifications.</p> <p>Coordinate multidisciplinary drawing reviews and approvals prior to implementation of modifications.</p> <p>Maintain master drawing registers and document history records.</p> <p>Ensure obsolete drawings are withdrawn and controlled in accordance with document management procedures.</p> <p>Support digitalization initiatives involving engineering document management and drawing systems.</p> <p>ENGINEERING DESIGN AND MODIFICATIONS</p> <p>Lead and coordinate engineering design activities for plant upgrades, asset improvement initiatives, debottlenecking projects, and operational modifications.</p> <p>Prepare conceptual, basic, and detailed engineering designs.</p> <p>Develop engineering calculations, technical specifications, scopes of work, and equipment layouts.</p> <p>Conduct feasibility studies and technical evaluations for proposed modifications.</p> <p>Ensure designs achieve required safety, operability, maintainability, reliability, and cost objectives.</p> <p>Coordinate engineering deliverables with Operations, Maintenance, Reliability, Projects, and external consultants.</p> <p>Participate in design verification and interdisciplinary design reviews.</p> <p>Ensure engineering designs consider lifecycle cost optimization and long-term asset sustainability.</p> <p>MANAGEMENT OF CHANGE (MOC)</p> <p>Manage engineering aspects of the Management of Change process.</p> <p>Review and evaluate proposed modifications and technical changes.</p> <p>Ensure all design changes are supported by appropriate engineering documentation and risk assessments.</p> <p>Coordinate updating of drawings, technical documents, procedures, and asset records following approved changes.</p> <p>Verify implementation of approved modifications and completion of as-built documentation.</p> <p>Ensure engineering changes comply with statutory, safety, environmental, and operational requirements.</p> <p>ENGINEERING DOCUMENT CONTROL</p> <p>Maintain engineering document control systems and technical databases.</p> <p>Ensure proper filing, numbering, distribution, revision control, and archiving engineering documents.</p> <p>Manage controlled copies of plant drawings and technical records.</p> <p>Coordinate document reviews and approvals with engineering disciplines and stakeholders.</p> <p>Ensure document accessibility for maintenance, operations, projects, and regulatory requirements.</p> <p>Support audits by ensuring engineering records and documentation are accurate and available.</p> <p>PLANT LAYOUTS AND AS-BUILT MANAGEMENT</p> <p>Develop and maintain plant general arrangement drawings, equipment layouts, utility plans, and site infrastructure drawings.</p> <p>Coordinate field verification activities to ensure drawing accuracy.</p> <p>Conduct plant surveys and document existing conditions where required.</p> <p>Ensure timely preparation and updating of as-built drawings following project completion.</p> <p>Establish processes for maintaining plant configuration integrity.</p> <p>Support operational and maintenance teams through provision of accurate plant data and layouts.</p> <p>PROJECTS AND CAPITAL DEVELOPMENT SUPPORT</p> <p>Support capital projects through engineering design development and drawing preparation.</p> <p>Review consultant and contractor engineering deliverables.</p> <p>Participate in project scope development, technical reviews, and constructability assessments.</p> <p>Ensure project designs integrate effectively with existing facilities.</p> <p>Coordinate engineering deliverables during project execution and commissioning activities.</p> <p>Support handover processes and verification of final project documentation.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor s degree in mechanical engineering/production engineering or CAD/CAM engineering or equivalent</p> <p><b>Experience: </b></p> <p> Bachelor s degree with 15+ years experience in designs and drafting mechanical structures and mechanical equipment in mining, minerals processing, or heavy industrial operations.</p> <p> Experience in CAD/CAM, SolidWorks or equivalent design software</p> <p> Minimum 5 years in a senior engineering, design coordination, or technical authority role.</p> <p>Certifications: Candidate must have followed certification</p> <p> Certified AutoCAD Professional or equivalent CAD Design Certification.</p> <p>Following certifications added advantage</p> <p> Certified Asset Management Assessor (CAMA).</p> <p> Certified Maintenance and Reliability Professional (CMRP).</p> <p> Lean Six Sigma Green Belt or Black Belt.</p> <p> Autodesk Certified Professional (ACP) or equivalent advanced CAD certification.</p> <p><br></p>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Automation is responsible for leading the maintenance, reliability, availability, and performance optimization of automation, process control, and industrial digital systems across the Copper Concentrator Plant.</p> <p>The role ensures the safe, reliable, and cost-effective operation of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA systems, Human Machine Interfaces (HMI), industrial communication networks, historians, servers, workstations, and associated automation infrastructure through effective maintenance strategies, shutdown planning, reliability improvement initiatives, cybersecurity compliance, asset integrity management, and continuous improvement programs.The position provides technical leadership to automation personnel, supports operational excellence, and maximizes plant availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of automation and control systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking &amp; Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure.</p> <p>The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p>AUTOMATION &amp; CONTROL SYSTEM MANAGEMENT</p> <p>Lead maintenance activities for automation, process control, and industrial digital systems across the concentrator plant.</p> <p>Ensure automation systems support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize system reliability and availability.</p> <p>Monitor automation system performance and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, engineering standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on automation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for automation systems and equipment.</p> <p>DCS, PLC &amp; SCADA SYSTEMS</p> <p>Lead reliability improvement initiatives for DCS, PLC, SCADA, HMI, historian, and control system infrastructure.</p> <p>Manage automation system architecture, configuration, and performance optimization.</p> <p>Support troubleshooting of control logic, process interlocks, alarms, permissives, and control loops.</p> <p>Ensure backup, restore, and disaster recovery procedures are maintained and tested.</p> <p>Manage automation software version control and change management processes.</p> <p>Review and approve DCS, PLC, and SCADA modifications.</p> <p>Ensure documentation, logic diagrams, and system architecture drawings remain updated.</p> <p>MOC &amp; CHANGE GOVERNANCE</p> <p>Ensure automation system modifications, upgrades, software changes, and configuration changes are managed through the approved Management of Change (MOC) process.</p> <p>Review proposed changes to DCS, PLC, SCADA, HMI, historian, control logic, alarms, interlocks, and associated automation infrastructure for technical and operational impacts.</p> <p>Ensure appropriate risk assessments, technical reviews, testing requirements, approvals, and implementation plans are completed before changes are introduced.</p> <p>Coordinate with Operations, Instrumentation, Electrical, Reliability, Projects, and relevant stakeholders during automation change activities.</p> <p>Ensure backup and recovery arrangements are completed before implementing critical system changes.</p> <p>Support FAT, SAT, simulation, functional testing, commissioning, and post-implementation verification of automation modifications.</p> <p>Ensure updated logic diagrams, configuration records, I/O documentation, system architecture drawings, software versions, and other technical documents are maintained following approved changes.</p> <p>Participate in post-change reviews and verify that modifications achieve the intended reliability, safety, control-performance, and operational objectives.</p> <p>PROCESS CONTROL &amp; OPTIMIZATION</p> <p>Support operational performance through advanced process control and automation improvements.</p> <p>Analyze process performance and identify opportunities for control optimization.</p> <p>Support tuning of control loops and optimization of process control strategies.</p> <p>Drive initiatives aimed at improving throughput, recovery, plant stability, and energy efficiency.</p> <p>Support implementation of advanced process control technologies and digital solutions.</p> <p>Work closely with Operations and Metallurgical teams to optimize plant performance.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p> Bachelor's Degree in Automation Engineering, Control Systems Engineering, Electrical &amp; Automation Engineering, Mechatronics Engineering, Instrumentation &amp; Control Engineering, or related discipline is mandatory.</p> <p>Experience:</p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in Automation maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of Automation assets in large-scale mineral processing facilities.</p> <p>Certifications: Candidates holding or pursuing any of the following certifications will have an added advantage:</p> <p> ISA Certified Automation Professional (CAP)</p> <p> Certified Maintenance &amp; Reliability Professional (CMRP)</p> <p> ISA Certified Control Systems Technician (CCST)</p> <p> Six Sigma (BB)</p> <p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: Mechanical Supervisor</p><p>Reports To: Maintenance Manager / Mechanical Engineering Manager / Site Manager</p><p>Job Details</p><p>Number of Vacancies: 55 Positions</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The Mechanical Supervisor is responsible for supervising and coordinating mechanical maintenance and installation activities across site operations. The role ensures that mechanical systems, equipment, and machinery are operating efficiently, safely, and in compliance with company standards and procedures.</p><p>Key Responsibilities</p><ul><li>Supervise daily mechanical maintenance and installation activities on site.</li><li>Assign tasks to technicians and ensure proper execution of work plans.</li><li>Monitor performance of mechanical systems, equipment, and machinery.</li><li>Ensure preventive and corrective maintenance activities are completed on time.</li><li>Inspect completed work to ensure quality standards and technical specifications are met.</li><li>Support troubleshooting and resolution of mechanical faults and breakdowns.</li><li>Ensure compliance with safety regulations and company procedures.</li><li>Coordinate with engineering and operations teams for maintenance planning.</li><li>Maintain maintenance records, reports, and work logs.</li><li>Ensure proper use of tools, equipment, and materials.</li><li>Support training and guidance of junior technicians and workers.</li></ul><p>Qualifications</p><p>Bachelor s Degree only in Mechanical Engineering or a related field.</p><p>Experience</p><p>Practical Experience: 0 years (Fresh graduates only)</p><p>No prior experience required.</p><p>Technical Skills</p><ul><li>Basic understanding of mechanical systems, maintenance, and equipment operations.</li><li>Ability to read technical drawings and maintenance manuals.</li><li>Familiarity with preventive maintenance procedures.</li><li>Basic knowledge of Microsoft Office (Word, Excel, Outlook).</li></ul><p>Soft Skills</p><ul><li>Strong leadership and supervisory skills.</li><li>Good communication and coordination abilities.</li><li>Problem-solving and decision-making skills.</li><li>Attention to detail and responsibility.</li><li>Ability to work under pressure and in field environments.</li><li>Team management and task organization skills.</li></ul><p>Working Conditions</p><ul><li>Site-based and operational work environment.</li><li>May require field supervision and outdoor work.</li><li>Standard working hours with possible overtime depending on project needs.</li></ul><p>Application Note :</p><p>The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age</p><p>The closing date is 3rd August 2026.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree only in Mechanical Engineering or a related field.</li><li>Practical Experience: 0 years (Fresh graduates only)</li><li>No prior experience required.</li><li>Basic understanding of mechanical systems, maintenance, and equipment operations.</li><li>Ability to read technical drawings and maintenance manuals.</li><li>Familiarity with preventive maintenance procedures.</li><li>Basic knowledge of Microsoft Office (Word, Excel, Outlook).</li><li>Strong leadership and supervisory skills.</li><li>Good communication and coordination abilities.</li><li>Problem-solving and decision-making skills.</li><li>Attention to detail and responsibility.</li><li>Ability to work under pressure and in field environments.</li><li>Team management and task organization skills.</li><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>

<p>The role is responsible for carrying out preventive, predictive, and corrective maintenance activities on mechanical equipment within the power and water plant. The role ensures the reliability, availability, efficiency, and safe operation of generating units, desalination systems, auxiliary equipment, and balance-of-plant assets.</p><p><strong>ACCOUNTABILITIES AND RESPONSIBILITIES</strong></p><p>1- Troubleshooting Faulty Machinery</p><p>Stay aware of anything unusual, troubleshoot faulty machinery and diagnose the root cause of the malfunction using diagnostic tools and problem-solving abilities.</p><p>2- Mechanical Preventive and Corrective maintenance</p><p>Performing preventive, predictive, and corrective maintenance on mechanical equipment to ensure the safe, reliable, and efficient operation of the power and water plant. This includes inspecting, troubleshooting, repairing, and overhauling rotating and static equipment such as pumps, compressors, valves, fans, heat exchangers, gearboxes, and associated auxiliary systems.</p><p>3-Contractor Management</p><p>Coordinate and supervise contractor personnel performing mechanical maintenance activities within the plant. Inspect completed contractor work to verify compliance with technical specifications, maintenance standards, and plant requirements</p><p>4- Collaboration on Complex Mechanical Issues</p><p>Ensure maintenance procedures reflect current best practices, OEM recommendations, safety requirements, and plant operational needs.</p><p>5-SOP &amp; Manual Update and Development</p><p>Support the development, review, and periodic update of Standard Operating Procedures (SOPs), maintenance procedures, and equipment manuals for mechanical systems and equipment. Ensure SOPs and maintenance documentation are aligned with OEM recommendations, industry best practices, plant requirements, and HSE standards.</p><p>6-Document Maintenance and Repairs Daily Log</p><p>Complete work orders and maintenance records accurately using SAP, Maximo, or other CMMS systems. Prepare maintenance reports and equipment history records. Update equipment inspection checklists and maintenance logs.</p><p>7- Coaching New Hires</p><p>Coach newly hired/Junior Mechanical Technicians and teach them various policies, procedures, and repair techniques.</p><p>8- Safety Compliance</p><p>Comply with all plant safety procedures, permit-to-work systems, and lockout/tagout (LOTO) requirements. Ensure proper use of Personal Protective Equipment (PPE). Participate in toolbox talks, safety meetings, and risk assessments. Report hazards, near misses, and incidents promptly.</p><p>9-Technical Skills</p><p>Mechanical troubleshooting and fault diagnosis. Pump and compressor maintenance. Turbine auxiliary systems maintenance. Mechanical seal and bearing replacement. Shaft alignment using laser alignment tools. Reading and interpreting P&amp;IDs, engineering drawings, and manuals. Hydraulic and pneumatic systems maintenance. Knowledge of condition monitoring techniques. Familiarity with SAP PM, Maximo, or similar maintenance systems.</p><p>10-Health, Safety &amp; Quality</p><p>Comply with all relevant health, safety and quality requirements, to guarantee employee safety and legislative compliance.</p><p>11- Continuous Improvement</p><p>Participate in continuous improvement initiatives to enhance equipment reliability, plant availability, and maintenance efficiency. Share technical knowledge and lessons learned with team members to promote continuous learning and development.</p><p><strong>COMMUNICATION CHANNELS</strong></p><p>Internal Mechanical Maintenance Lead Maintenance Team Operations Team External Contractors Suppliers</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in Mechanical Engineer from a technical or vocational college.</li><li>Proficiency in English is a must, Arabic is a plus.</li><li>3 to 6 years of direct and relevant experience in power generation, desalination, water treatment, utilities.</li><li>Communication skills, Computer literacy (ERP), Microsoft tool (Excel, PowerPoint, Word).</li><li>Mechanical skills, Troubleshooting skills, Detail-Orientation, Problem-Solving skills, Teamwork, Knowledge in OSHA standards.</li><li>People Centricity, Integrity, Agility, Collaboration.</li></ul>

<p><b>Brief Posting Description </b></p> <p>The Engineer Automation is responsible for supporting the maintenance, reliability, availability, and performance optimization of automation, process control, and industrial digital systems across the Copper Concentrator Plant. The role supports the safe, reliable, and cost-effective operation of Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA systems, Human Machine Interfaces (HMI), industrial communication networks, historians, servers, workstations, and associated automation infrastructure through maintenance execution, troubleshooting, cybersecurity compliance, shutdown support, commissioning activities, and continuous improvement initiatives.</p> <p>The position provides technical support to maintenance teams and contractors and is responsible for maintaining automation and control systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking &amp; Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure.</p> <p>The role works closely with Operations, Reliability, Mechanical Maintenance, Electrical, Instrumentation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p><b>Detailed Description </b></p> <p>AUTOMATION &amp; CONTROL SYSTEM MANAGEMENT</p> <p>Support maintenance activities for automation, process control, and industrial digital systems across the concentrator plant.</p> <p>Ensure automation systems support safe, reliable, and efficient plant operation.</p> <p>Assist in implementing maintenance strategies to improve system reliability and availability.</p> <p>Monitor automation system performance and recommend corrective actions.</p> <p>Ensure compliance with OEM recommendations, engineering standards, and statutory requirements.</p> <p>Support asset lifecycle management and replacement planning activities.</p> <p>Provide technical support for automation maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and operational readiness activities.</p> <p>DCS, PLC &amp; SCADA SYSTEMS</p> <p>Support reliability improvement initiatives for DCS, PLC, SCADA, HMI, historian, and control system infrastructure.</p> <p>Assist with automation system configuration, maintenance, and performance optimization.</p> <p>Troubleshoot control logic, process interlocks, alarms, permissives, and control loops.</p> <p>Support backup, restore, and disaster recovery activities.</p> <p>Assist with software version control and change management processes.</p> <p>Support testing and verification of DCS, PLC, and SCADA modifications.</p> <p>Maintain automation documentation, logic diagrams, and system records.</p> <p>MOC &amp; CHANGE GOVERNANCE</p> <p>Support implementation of approved Management of Change (MOC) requirements for automation modifications and software changes.</p> <p>Assist in reviewing proposed changes to DCS, PLC, SCADA, HMI, historian, control logic, alarms, interlocks, and associated automation infrastructure.</p> <p>Participate in risk assessments, testing, validation, and documentation activities associated with approved changes.</p> <p>Coordinate with Operations, Instrumentation, Electrical, Reliability, and Projects teams during implementation activities.</p> <p>Support FAT, SAT, simulation testing, commissioning, and post-implementation verification activities.</p> <p>Ensure technical documentation remains updated following approved modifications.</p> <p>Participate in post-change reviews and verification activities.</p> <p>PROCESS CONTROL &amp; OPTIMIZATION</p> <p>Support process control and automation improvement initiatives.</p> <p>Analyze process performance and identify opportunities for control-loop optimization.</p> <p>Assist with control-loop tuning and performance monitoring.</p> <p>Support initiatives aimed at improving throughput, recovery, plant stability, and energy efficiency.</p> <p>Support implementation of advanced process control technologies and digital solutions.</p> <p>Work closely with Operations and Metallurgical teams to optimize plant performance</p> <p>IT/OT CYBERSECURITY INTERFACE</p> <p>Support implementation of cybersecurity requirements for DCS, PLC, SCADA, HMI, historians, servers, workstations, and industrial communication networks.</p> <p>Assist with user access management, backup verification, patching activities, and cybersecurity compliance requirements.</p> <p>Participate in cybersecurity audits, vulnerability assessments, and incident investigations as required.</p> <p>Support cybersecurity-related upgrades and remediation activities.</p> <p>Ensure automation activities comply with approved OT cybersecurity policies and procedures.</p> <p>Maintain coordination between IT, OT Cybersecurity, Automation, Instrumentation, Electrical, Operations, and Project teams.</p> <p><br></p> <p> </p> <p><b>Job Requirements </b></p> <p>Education: </p> <p> Bachelor's Degree in Automation Engineering, Control Systems Engineering, Electrical &amp; Automation Engineering, Mechatronics Engineering, Instrumentation &amp; Control Engineering, or related discipline is mandatory.</p> <p><b>Experience</b>: </p> <p> Bachelor s Degree with 5+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 3 years of experience in Automation maintenance and reliability engineering is mandatory.</p> <p> Experience supporting DCS, PLC, SCADA, and industrial communication systems in mineral processing or heavy&nbsp;</p>

<p>ROLE PURPOSE is responsible for carrying out preventive, predictive, and corrective maintenance activities on mechanical equipment within the power and water plant. The role ensures the reliability, availability, efficiency, and safe operation of generating units, desalination systems, auxiliary equipment, and balance-of-plant assets. ACCOUNTABILITIES AND RESPONSIBILITIES 1- Troubleshooting Faulty Machinery Stay aware of anything unusual, troubleshoot faulty machinery and diagnose the root cause of the malfunction using diagnostic tools and problem-solving abilities. 2- Mechanical Preventive and Corrective maintenance Performing preventive, predictive, and corrective maintenance on mechanical equipment to ensure the safe, reliable, and efficient operation of the power and water plant. This includes inspecting, troubleshooting, repairing, and overhauling rotating and static equipment such as pumps, compressors, valves, fans, heat exchangers, gearboxes, and associated auxiliary systems. 3-Contractor Management Coordinate and supervise contractor personnel performing mechanical maintenance activities within the plant. Inspect completed contractor work to verify compliance with technical specifications, maintenance standards, and plant requirements 4- Collaboration on Complex Mechanical Issues Ensure maintenance procedures reflect current best practices, OEM recommendations, safety requirements, and plant operational needs. 5-SOP &amp; Manual Update and Development Support the development, review, and periodic update of Standard Operating Procedures (SOPs), maintenance procedures, and equipment manuals for mechanical systems and equipment. Ensure SOPs and maintenance documentation are aligned with OEM recommendations, industry best practices, plant requirements, and HSE standards. 6-Document Maintenance and Repairs Daily Log Complete work orders and maintenance records accurately using SAP, Maximo, or other CMMS systems. Prepare maintenance reports and equipment history records. Update equipment inspection checklists and maintenance logs. 7- Coaching New Hires Coach newly hired/Junior Mechanical Technicians and teach them various policies, procedures, and repair techniques. 8- Safety Compliance Comply with all plant safety procedures, permit-to-work systems, and lockout/tagout (LOTO) requirements. Ensure proper use of Personal Protective Equipment (PPE). Participate in toolbox talks, safety meetings, and risk assessments. Report hazards, near misses, and incidents promptly. 9-Technical Skills Mechanical troubleshooting and fault diagnosis. Pump and compressor maintenance. Turbine auxiliary systems maintenance. Mechanical seal and bearing replacement. Shaft alignment using laser alignment tools. Reading and interpreting P&amp;IDs, engineering drawings, and manuals. Hydraulic and pneumatic systems maintenance. Knowledge of condition monitoring techniques. Familiarity with SAP PM, Maximo, or similar maintenance systems. 10-Health, Safety &amp; Quality Comply with all relevant health, safety and quality requirements, to guarantee employee safety and legislative compliance. 11- Continuous Improvement Participate in continuous improvement initiatives to enhance equipment reliability, plant availability, and maintenance efficiency. Share technical knowledge and lessons learned with team members to promote continuous learning and development. COMMUNICATION CHANNELS Internal Mechanical Maintenance Lead Maintenance Team Operations Team External Contractors Suppliers</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Qualifications: Diploma in Mechanical Engineer from a technical or vocational college. Proficiency in English is a must, Arabic is a plus. Minimum Experience: 3 to 6 years of direct and relevant experience in power generation, desalination, water treatment, utilities. Skills and Competencies Generic Skills: Communication skills, Computer literacy (ERP), Microsoft tool (Excel, PowerPoint, Word). Job Specific Skills: Mechanical skills, Troubleshooting skills, Detail-Orientation, Problem-Solving skills, Teamwork, Knowledge in OSHA standards. Behavioral Competencies: People Centricity, Integrity, Agility, Collaboration. *Only candidates selected to advance to the next stages of the assessment will be contacted*</p>

<p>General Purpose Lead and manage the end-to-end operations of Atyab Group s feed manufacturing plant producing animal feed and aqua (fish) feed, through: (1) directing safe, efficient and cost-effective production from raw-material intake through grinding, mixing, conditioning, extrusion, pelleting, drying, cooling, coating and packaging so that volume, yield, quality and cost targets are met; (2) safeguarding product quality and feed safety across both animal-feed and aquafeed lines, ensuring compliance with HACCP, GMP, food-safety, HSE and applicable regulatory standards; (3) leading the plant team, sustaining equipment reliability and driving continuous improvement protecting operational continuity, product integrity and the Group s cost, service and growth commitments. Main Accountabilities Production &amp; Operations Management Direct daily operations across animal-feed and aquafeed lines receiving and grinding, batching and mixing, conditioning, extrusion and pelleting, drying, cooling, coating and packaging to meet the production plan and quality targets. Manage production scheduling, line changeovers and capacity utilisation to fulfil demand while minimising downtime, waste and cross-contamination between species-specific and medicated formulations. Monitor critical process parameters moisture, extrusion temperature and pressure, pellet durability, water stability, particle size and dosing accuracy and take corrective action to keep output within specification. Optimise throughput, energy and raw-material yield to achieve cost, efficiency and productivity KPIs without compromising product quality. Quality, Feed Safety &amp; Compliance Ensure all finished animal and fish feed meets nutritional, physical-quality and customer requirements, working closely with Quality Assurance and formulation teams. Implement and maintain feed-safety and quality management systems (HACCP, GMP/GMP+, ISO/FSMS as applicable), including hygiene, biosecurity, traceability, sampling and recall readiness. Enforce controls that prevent cross-contamination, carry-over and mislabelling between feed types, and ensure medicated-feed handling follows approved procedures. Support internal and external audits and regulatory inspections, and close out non-conformances through effective corrective and preventive actions. Maintenance, Engineering &amp; Asset Reliability Ensure plant, machinery and utilities extruders, pellet mills, mixers, dryers, coolers, boilers, and dust and fire-safety systems remain maintained and fully operational. Establish and oversee preventive and predictive maintenance programmes to maximise equipment availability and minimise unplanned breakdowns. Plan and manage capital projects, equipment upgrades and spare-parts strategy in coordination with Engineering and Procurement. Planning, Cost, Inventory &amp; Reporting Plan raw-material, additive and packaging requirements with Supply Chain and Procurement to ensure production continuity and optimal stock levels. Manage plant budgets, control operating and conversion costs, and identify and deliver cost-saving and efficiency opportunities. Establish plant KPIs and prepare regular reports on production, yield, quality, downtime, HSE and cost performance for management. People Leadership, HSE &amp; Continuous Improvement Lead, supervise and develop plant supervisors, operators and support staff; set objectives, manage performance and build a skilled, motivated workforce. Champion a strong HSE and food-safety culture ensuring inductions, training, PPE, safe work practices, permits and emergency preparedness across the plant. Drive continuous-improvement and lean initiatives to raise productivity, quality, reliability and cost performance. Coordinate with Operations, Supply Chain, Quality, HSE, Finance, HR and Sales on all plant-related matters, and support management with operational analysis and recommendations. Undertake any other related duties, projects or responsibilities that may be assigned from time to time by the VP Operations or management, in line with the role and the evolving needs of the business.</p><p><strong>Desired Candidate Profile</strong></p><b>Educational Requirements</b><p>Bachelor s degree in Feed / Milling Technology, Food Science, Animal Science or Nutrition, Chemical / Mechanical / Production Engineering, Operations Management or a related discipline.</p><p>Professional certification in feed manufacturing, food safety (HACCP / GMP+), production or operational excellence preferred.</p><b>Experience</b><p>10+ years of experience in feed, food or process manufacturing operations, including 3+ years in a plant / production management or senior supervisory role.</p><p>Proven experience running an animal-feed, aqua feed, milling or food-processing facility ideally involving extrusion and / or pelleting of animal and fish feed.</p><p>Experience leading production, quality, maintenance and HSE functions within an integrated plant environment, across batch and continuous processes.</p><p>Track record in cost control, KPI management, capital projects and continuous improvement.</p><b>Know-How</b><p>Feed and aqua feed manufacturing processes grinding, mixing, conditioning, extrusion, pelleting, drying, cooling, coating and packaging.</p><p>Product-quality parameters pellet durability, water stability, buoyancy, moisture, particle size and dosing accuracy for animal and fish feed.</p><p>Feed-safety and quality systems HACCP, GMP / GMP+, ISO / FSMS, biosecurity, traceability and recall management.</p><p>Plant maintenance, utilities and equipment reliability, including preventive and predictive maintenance.</p><p>Production planning, inventory, budgeting and conversion-cost control.</p><p>HSE and food-safety regulations, and Oman labour and regulatory compliance requirements.</p><p>KPI development, root-cause analysis and continuous-improvement / lean methodologies.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Lead and manage the site workforce, ensuring high performance, discipline, and adherence to safety standards.</p></li><li><p>Oversee day-to-day maintenance activities across fertilizer plant equipment and utilities to ensure maximum plant reliability and operational efficiency.</p></li><li><p>Plan preventive, predictive, and shutdown maintenance activities for rotating, static, and utility equipment.</p></li><li><p>Optimize manpower allocation, resources, and maintenance schedules to improve productivity and minimize downtime.</p></li><li><p>Establish performance targets, conduct team evaluations, and drive continuous improvement initiatives.</p></li><li><p>Ensure compliance with HSE standards, permit-to-work (PTW) systems, statutory regulations, and plant safety procedures.</p></li><li><p>Coordinate with production, engineering, contractors, and vendors to execute maintenance activities and meet operational targets.</p></li><li><p>Manage maintenance budgets, monitor costs, and implement cost-saving initiatives without compromising safety or quality.</p></li><li><p>Serve as the primary point of contact for plant management and client representatives, ensuring timely resolution of operational and maintenance issues.</p></li><li><p>Attend planning and review meetings, present maintenance performance, shutdown progress, and reliability improvement plans.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p><strong>B.Tech/B.E. in Mechanical Engineering.</strong></p></li><li><p><strong>8–10 years of experience in fertilizer plant maintenance</strong>, preferably in ammonia, urea, phosphatic, NPK, or complex fertilizer manufacturing facilities.</p></li><li><p>Strong experience in maintenance planning, shutdown/turnaround execution, equipment reliability, and asset integrity management.</p></li><li><p>Hands-on knowledge of rotating equipment (compressors, pumps, turbines), static equipment (pressure vessels, heat exchangers, reactors), piping systems, and utilities.</p></li><li><p>Thorough understanding of preventive, predictive, and condition-based maintenance practices.</p></li><li><p>Strong knowledge of HSE standards, PTW systems, risk assessment, and statutory compliance in process industries.</p></li><li><p>Proven leadership experience in managing multidisciplinary maintenance teams and contractors.</p></li><li><p>Excellent communication, stakeholder management, and problem-solving skills.</p></li><li><p>Experience in maintenance budgeting, resource optimization, and performance management.</p></li><li><p>Ability to manage multiple priorities, work under pressure, and support plant shutdowns and emergency maintenance activities.</p></li></ul><p></p></section>

<p>The Sr. Officer - Card Operation ensures the accurate and timely processing of all activities related to OmanNet, Visa and debit card transactions, as well as reconciliation efforts. He/ She delivers high-quality support services and control functions to customers, facilitating the efficient processing of daily financial and non-financial transactions. The Sr. Officer Card Operations maintains operational integrity through meticulous attention to detail, strict adherence to best practices and timely service delivery. He/ She contributes directly to enhancing customer satisfaction and ensuring compliance with internal policies and regulatory requirements.</p><p>Key Accountabilities:</p><ul><li>Executes and resolves disputes related to Visa and OmanNet transactions by gathering supporting evidence, submitting chargebacks, and maintaining detailed dispute logs under the supervision of the line manager. Collaborates with customers, acquiring banks, and scheme representatives to ensure timely resolution in line with dispute timelines and regulatory requirements.</li><li>Prepares and submits reports to the Central Bank of Oman and Visa, summarizing transaction volumes, settlement data, dispute analysis, fraud statistics, and compliance adherence under the supervision of the line manager. Ensures timely and accurate submission of financial and operational reports within required deadlines.</li><li>Conducts analysis of customer complaints related to payment cards, transaction failures, and system issues. Identifies root causes, provides resolutions in a timely manner, and documents findings for audit and reporting purposes.</li><li>Reconciles OmanNet Conventional and Visa general ledgers by preparing daily reconciliation sheets, validating entries, and resolving discrepancies. Ensures settlements and reconciliation processes comply with accuracy standards and internal controls.</li><li>Inputs daily financial transactions into the system, including manual entries, validating for accuracy, completeness, and timeliness.</li><li>Processes daily settlements for OmanNet and Visa transactions, ensuring all vouchers are accurately prepared in line with operational procedures.</li><li>Analyzes and processes MIS data to generate reports covering transaction trends, performance metrics, and reconciliation summaries.</li><li>Serves as the key custodian for stock and keys, managing secure handovers and ensuring accurate documentation of all key movements.</li><li>Participates in testing of new systems, upgrades, and processes to ensure operational requirements are met. Provides feedback and documents test results, identifying gaps and issues.</li><li>Collaborates with vendors, payment processors, and scheme operators to resolve technical issues, coordinate file exchanges, and meet service level agreements.</li><li>Reviews operational processes regularly to identify gaps, mitigate risks, and improve alignment with best practices.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>University or College Diploma in Business Administration or a related business field.</li><li>Minimum of 4 years of relevant banking experience in Card Operations is preferred.</li><li>A relevant professional certification (such as: CBOP, Lean Six Sigma etc.) is preferred.</li><li>A proven track record of working closely with Bank s branches.</li><li>Extensive hands-on experience in card operations.</li><li>A proven track record of executing card operations task without disruption.</li></ul>

<p><b>Brief Posting Description </b></p> <p>The Senior Engineer Electrical Maintenance is responsible for leading the maintenance, reliability, availability, and performance optimization of all electrical systems across the Copper Concentrator Plant. The role ensures the safe, reliable, and cost-effective operation of power generation and distribution systems, substations, transformers, switchgear, motors, motor control centers (MCCs), variable frequency drives (VFDs), electrical protection systems, UPS systems, emergency power systems, and associated plant equipment through effective maintenance strategies, shutdown planning, reliability improvement initiatives, asset integrity management, and continuous improvement programs.</p> <p>The position provides technical leadership to maintenance teams, supports operational excellence, and maximizes equipment availability while minimizing lifecycle costs and production losses. The incumbent is responsible for the maintenance and reliability of electrical systems associated with the Primary Crusher, Apron Feeders, Conveyors, Ore Stockpile Stacking and Reclaiming Systems, SAG Mill, Ball Mills, HIG Mill, Flotation Plant, Thickeners, Concentrate Filtration Plant, Slurry Pumps, Process Water Systems, Tailings Systems, and associated plant infrastructure. The role works closely with Operations, Reliability, Mechanical Maintenance, Instrumentation, Automation, and Project teams to achieve production, safety, reliability, and asset performance objectives while ensuring compliance with safety, environmental, and asset management standards.</p> <p>Detailed Description </p> <p><b>ELECTRICAL MAINTENANCE MANAGEMENT</b></p> <p>Lead maintenance activities for electrical systems across the concentrator plant and support infrastructure.</p> <p>Maintenance experience with 33kV/11kV substations, transformers, switchgear, protection systems, and plant-wide HV/LV distribution networks is mandatory</p> <p>Ensure maintenance practices support safe, reliable, and efficient plant operation.</p> <p>Develop and implement maintenance strategies to maximize equipment reliability and availability.</p> <p>Monitor equipment condition and recommend corrective and preventive actions.</p> <p>Ensure compliance with OEM recommendations, electrical standards, and statutory requirements.</p> <p>Support long-term asset lifecycle management and replacement planning.</p> <p>Provide technical guidance on electrical maintenance planning, scheduling, and execution.</p> <p>Support commissioning, startup, and ramp-up activities for electrical systems and equipment.</p> <p>ELECTRICAL SYSTEM RELIABILITY</p> <p>Lead reliability improvement initiatives for transformers, switchgear, substations, motors, MCCs, VFDs, UPS systems, generators, and power distribution equipment.</p> <p>Analyze equipment failures and identify opportunities to improve reliability and maintainability.</p> <p>Conduct Root Cause Failure Analysis (RCFA) for major electrical failures.</p> <p>Facilitate Failure Modes and Effects Analysis (FMEA) studies.</p> <p>Identify recurring equipment issues and implement sustainable corrective actions.</p> <p>Develop reliability-centered maintenance strategies.</p> <p>Monitor equipment performance against established reliability and availability KPIs.</p> <p>Support predictive and condition monitoring programs including thermography, motor testing, partial discharge monitoring, and power quality assessments.</p> <p>POWER DISTRIBUTION &amp; PROTECTION SYSTEMS</p> <p>Ensure safe and reliable operation of HV and LV power distribution systems.</p> <p>Maintain substations, transformers, switchgear, protection relays, circuit breakers, and associated electrical infrastructure.</p> <p>Review protection settings and coordinate electrical protection studies.</p> <p>Monitor power quality and implement corrective actions where necessary.</p> <p>Support system load analysis, energy optimization, and electrical efficiency initiatives.</p> <p>Ensure compliance with electrical safety regulations and industry best practices.</p> <p>MAINTENANCE PLANNING &amp; EXECUTION</p> <p>Support development of annual maintenance plans and budgets for electrical assets.</p> <p>Review and optimize preventive and predictive maintenance programs.</p> <p>Optimize maintenance frequencies and task scopes based on equipment criticality and performance.</p> <p>Coordinate maintenance resources for planned and corrective maintenance activities.</p> <p>Ensure work orders are properly executed, documented, and closed in SAP PM.</p> <p>Improve maintenance work management processes and effectiveness.</p> <p>Monitor maintenance backlog and prioritize critical equipment activities.</p> <p>SHUTDOWN &amp; TURNAROUND MANAGEMENT</p> <p>Lead preparation and execution of electrical shutdown and turnaround activities.</p> <p>Develop shutdown scopes, resource requirements, budgets, and schedules.</p> <p>Coordinate contractors, OEM specialists, and internal teams during shutdown execution.</p> <p>Monitor shutdown progress and manage critical path activities.</p> <p>Ensure shutdown work complies with safety, environmental, and quality requirements.</p> <p>Conduct post-shutdown reviews and capture lessons learned.</p> <p>ASSET INTEGRITY MANAGEMENT</p> <p>Ensure the integrity and reliability of critical electrical assets.</p> <p>Review inspection and test findings and establish corrective maintenance actions.</p> <p>Support condition monitoring and predictive maintenance programs.</p> <p>Participate in risk assessments and asset criticality evaluations.</p> <p>Ensure compliance with asset management standards and engineering requirements.</p> <p>Support development of asset lifecycle and replacement strategies.</p> <p> </p> <p><b>Job Requirements </b></p> <p><b>Education: </b></p> <p><b> Bachelor s degree in electrical engineering is mandatory</b></p> <p>Experience: </p> <p> Bachelor s Degree with 10+ years of experience in a Copper Concentrator Plant or related process plant with similar type of equipment is mandatory.</p> <p> Minimum 8 years of experience in electrical maintenance and reliability engineering is mandatory.</p> <p> Proven track record of successfully managing maintenance and reliability of electrical assets in large-scale mineral processing facilities.</p>

<p><h4>Description</h4> <p><strong>The opportunity</strong><br> A new financial markets infrastructure venture is being established in Oman, backed by prominent institutional investors and operating under an international common law framework. The platform is a greenfield central securities depository being built to go-live in 2027.</p> <p>This is one of the two most important hires the organisation will make, alongside the Project Manager. We are hiring a Product Owner to own the product in its entirety: the platform itself, the commercial proposition wrapped around it, the offerings made to each participant type, the fee schedule, the rulebook, the participant documentation, and the operating model that governs how participants interact with the platform. The role sets the what; the Project Manager delivers the when.</p> <p>The post-holder must be a deep domain expert in central securities depository, custody, and post-trade infrastructure: fluent in settlement, registry, asset servicing, corporate actions, repo, and the operational realities of how a CSD works. They will engage with the regulator, anchor issuers, custodians, primary dealers, and the build vendor and must be unquestionably authoritative on what the platform is, how it works, and why it has been designed the way it has.</p> <h4>What the role covers</h4> <ul> <li>Owning the product vision and roadmap end-to-end; defining the commercial proposition for each participant category</li> <li>Owning the fee schedule: design, benchmarking against international comparators, and ongoing maintenance</li> <li>Translating the product vision into functional requirements the build vendor delivers against; owning the functional specification across settlement, registry, asset servicing, corporate actions, repo, primary issuance, and participant interfaces</li> <li>Approving vendor functional design documents on behalf of the Company</li> <li>Owning the rulebook: structure, content, drafting, version control, and approval cycle</li> <li>Owning participant-facing documentation: admission criteria, membership agreements, participant operating manuals, fee schedules, and service level agreements</li> <li>Owning the operating model design: how participants interact day-to-day, cut-off times, settlement windows, corporate actions calendars, and exception handling</li> <li>Acting as the Company's authoritative voice on the platform design in regulatory engagements, with issuers, custodians, and international counterparties</li> <li>Line managing the functional Business Analysts and working in tight partnership with the Project Manager</li> </ul> <h4>Requirements</h4> <p><strong>Who we are looking for</strong><br> At least 15 years in central securities depository, custody, post-trade, or capital markets infrastructure, with substantial time in a product, design, or operating-model role rather than a purely operational one. Direct, demonstrable experience as the functional and product authority on a CSD, custody platform, post-trade platform, or financial market infrastructure of comparable scale and complexity: this is non-negotiable. The post-holder must have personally led, not merely participated in, the functional design of a build of similar weight.</p> <p>Deep, current expertise across settlement, custody, registry, corporate actions, asset servicing, repo, primary issuance, and post-trade transparency. Demonstrated experience drafting CSD rulebooks, participant documentation, fee schedules, and operating manuals. Track record of acting as the functional counterpart to a major build vendor and signing off vendor functional design. Fluent in English.</p> <p>Experience with Islamic-finance-compatible CSD design, familiarity with CPMI-IOSCO principles, and Arabic language skills are all advantages.</p> <h4>What this is</h4> <p>The product does not exist yet. The rulebook has not been written, the fee schedule has not been set, and the functional specification has not been drafted. The person who takes this role will have done all of it. If you are unquestionably expert in CSD and post-trade design, have personally led a build of comparable weight, and want to own a product from a blank sheet, this is worth a conversation.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Apply reservoir engineering &amp; Simulation to the subsurface development ABB Development, by (1) Conducting workflows pertaining to reserves maturation, well testing, field development planning update reservoir management strategies, (2) Monitor a range of activities, including well surveillance, fluid sampling, well testing and completion operations, (3) Work and support with multi-disciplinary team to apply reservoir engineering practices to reservoir management, well test design and analysis, reservoir simulation, reserves evaluation &amp; estimation, and (4) Directing lab workflows, managing lab data, working PVT data analysis (with internal and external PVT reports), developing EoS models &amp; BOT, developing final report, and presenting post project reviews with BUs. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justification s, and best international practices in consonance with national objectives. Main tasks and responsibilities: Provide guidance to support the Manager ABB Development in achieving desired performance objectives. Guide Manager ABB Development &amp; Reservoir Team to aid in maintaining high technical standards Guide on development plans / programs as required by the Manager ABB Development Guide on fluid characterization studies for understanding fluid distribution in the field Guide on analysis and interpretation of RFT / MDT data as required Participate in integrated field studies for maturing hydrocarbon resources Evaluate well/reservoir performance and recommend production improvement opportunities Guide on RE input to business planning, reserve evaluation and well proposals Work with other disciplines on hydrocarbon maturation to further develop the asset Evaluate well/reservoir performance and recommend production improvement opportunities Provide RE input to business planning, reserve evaluation and well proposals Participate in integrated field studies Work with other disciplines on hydrocarbon maturation to further develop the asset Coach and mentor early career professionals Participate in integrated field studies for maturing hydrocarbon resources Key interactions Internal: Subsurface Development &amp; Exploration / Well Delivery / Facilities / Operations / Supply Chain External: Contractors, Technical Committees Notable Working Conditions. Field operations and o ffice environment, computer screen use. Education requirements Bachelor s degree in Petroleum Engineering or equivalent Language requirements Excellent knowledge of written, read, and spoken English (required) - Arabic - Native (desirable) Background and experience Competencies and skills 10+ years experience in Reservoir Engineering within Oil &amp; Gas industry Proficiency in industry standard reservoir engineering packages such as Kappa Saphire, OFM, Eclipse Experience with reservoir management Experience with reservoir simulation Good understanding of production operations and completion procedures Experience in tight gas reservoirs is a plus Experience in working with multi-disciplinary team role Soft: Leading multidisciplinary integrated teams and contribution to exploration opportunity risking and ranking. Has participated or contributed to technical reviews, audits and preparation of Field Development Plans Self-starter with the ability to multi task while maintaining priorities Technical: Computer literacy including MS Office Project Management skills</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>10+ years experience in Reservoir Engineering within Oil &amp; Gas industry</li><li>Proficiency in industry standard reservoir engineering packages such as Kappa Saphire, OFM, Eclipse</li><li>Experience with reservoir management</li><li>Experience with reservoir simulation</li><li>Good understanding of production operations and completion procedures</li><li>Experience in tight gas reservoirs is a plus</li><li>Experience in working with multi-disciplinary team role</li><li>Soft: Leading multidisciplinary integrated teams and contribution to exploration opportunity risking and ranking.</li><li>Has participated or contributed to technical reviews, audits and preparation of Field Development Plans</li><li>Self-starter with the ability to multi task while maintaining priorities</li><li>Technical: Computer literacy including MS Office</li><li>Project Management skills</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: Water Network Engineer</p><p>Reports To: Water Engineering Manager / Utilities Manager / Project Manager</p><p>Job Details</p><p>Number of Vacancies: 46 Positions</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The Water Network Engineer is responsible for supporting the design, operation, maintenance, and monitoring of water distribution networks. The role ensures efficient water supply systems, minimizes losses, and supports the planning and implementation of water infrastructure projects.</p><p>Key Responsibilities</p><ul><li>Assist in the design, operation, and maintenance of water distribution networks.</li><li>Monitor water network performance and identify leaks, losses, and inefficiencies.</li><li>Support planning and implementation of water infrastructure projects.</li><li>Prepare technical reports, drawings, and documentation related to water systems.</li><li>Conduct site inspections and field assessments of pipelines and network assets.</li><li>Coordinate with maintenance and operational teams to resolve network issues.</li><li>Support hydraulic analysis and system performance evaluation.</li><li>Ensure compliance with engineering standards and safety regulations.</li><li>Maintain accurate records of water network operations and maintenance activities.</li><li>Assist in improving efficiency and sustainability of water distribution systems.</li></ul><p>Qualifications</p><ul><li>Bachelor s Degree only in Water Engineering, Civil Engineering, Hydraulic Engineering, or a related field.</li></ul><p>Experience</p><p>Practical Experience: 0 years (Fresh graduates are welcome to apply.)</p><p>Technical Skills</p><ul><li>Basic understanding of water distribution systems and hydraulic principles.</li><li>Ability to read engineering drawings and technical specifications.</li><li>Familiarity with basic hydraulic analysis concepts.</li><li>Proficiency in Microsoft Office (Word, Excel, PowerPoint).</li><li>Knowledge of engineering software is an advantage.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and problem-solving skills.</li><li>Attention to detail and accuracy.</li><li>Good communication and teamwork skills.</li><li>Ability to work in field and office environments.</li><li>Willingness to learn and develop professionally.</li></ul><p>Working Conditions</p><p>Office and field-based work environment.</p><p>May require site visits and inspections.</p><p>Standard working hours with occasional field work depending on project needs.</p><p>Application Note :</p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree only in Water Engineering, Civil Engineering, Hydraulic Engineering, or a related field.</li><li>Practical Experience: 0 years (Fresh graduates are welcome to apply.)</li><li>Basic understanding of water distribution systems and hydraulic principles.</li><li>Ability to read engineering drawings and technical specifications.</li><li>Familiarity with basic hydraulic analysis concepts.</li><li>Proficiency in Microsoft Office (Word, Excel, PowerPoint).</li><li>Knowledge of engineering software is an advantage.</li><li>Strong analytical and problem-solving skills.</li><li>Attention to detail and accuracy.</li><li>Good communication and teamwork skills.</li><li>Ability to work in field and office environments.</li><li>Willingness to learn and develop professionally.</li><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>