Solar Power Engineer Jobs in Oman

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The PCC Telecom Engineer is responsible for executing, coordinating, and supporting all pre-commissioning and commissioning activities related to the telecommunications systems of a large-scale oil & gas / LNG facility. The role ensures that telecom systems are installed, tested, commissioned, and handed over safely and in compliance with project specifications, international standards, and applicable codes.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Review and understand telecom engineering documents, including specifications, drawings, data sheets, method statements, commissioning procedures, and vendor documentation.</li> <li>Participate in system walkdowns, punch listing, and verification of installation completeness for telecom systems.</li> <li>Verify correctness of installation for telecom equipment, cabling, fiber optic systems, racks, cabinets, and interfaces.</li> <li>Support preparation and updating of pre-commissioning and commissioning test packs.</li> <li>Ensure all telecom systems are mechanically complete and ready for commissioning activities.</li> <li>Coordinate with construction, quality, and engineering teams to resolve technical queries and punch items.</li> </ul> <p><strong>Commissioning & start-up</strong></p> <ul> <li>Execute and supervise commissioning activities for telecom systems, including functional testing, integration testing, and system validation.</li> <li>Perform system tests such as loop checks, signal verification, end-to-end testing, and redundancy checks.</li> <li>Interface with vendors, subcontractors, and other discipline engineers during commissioning activities.</li> <li>Support energization, SAT (Site Acceptance Tests), and system integration with ICSS, safety, and IT networks.</li> <li>Identify, troubleshoot, and resolve telecom-related issues during commissioning and start-up.</li> <li>Assist in preparing systems for Ready for Start-Up (RFSU) and operational handover.</li> </ul> <h4>Telecom systems scope (typical)</h4> <ul> <li>Telecom network infrastructure (fiber optic & copper)</li> <li>Telephone systems (PABX / IP telephony)</li> <li>Public address & general alarm (PAGA) systems</li> <li>CCTV & security surveillance systems</li> <li>Access control & intrusion detection systems</li> <li>Radio communication systems (TETRA / UHF / VHF)</li> <li>Data networks & telecom cabinets</li> <li>Interfaces with control and safety systems</li> </ul> <h4>Safety, quality & documentation</h4> <ul> <li>Strictly comply with HSE policies, procedures, and site safety requirements at all times.</li> <li>Participate in toolbox talks, job safety analyses (JSA), and risk assessments.</li> <li>Ensure commissioning activities are performed in accordance with approved procedures and quality standards.</li> <li>Support compilation of as-built documentation, test records, and commissioning dossiers.</li> <li>Contribute to lessons learned and commissioning close-out reports.</li> </ul> <h4>Interface & coordination</h4> <ul> <li>Work closely with commissioning management, discipline leads, construction teams, and vendors.</li> <li>Coordinate with operations and maintenance representatives during system handover.</li> <li>Support planning and sequencing of telecom commissioning activities in line with overall project milestones.</li> </ul> <h4>Qualification requirements</h4> <ul> <li>Bachelor’s degree in telecommunications engineering, electrical engineering, or related discipline.</li> <li>Minimum 5–8 years of experience in telecom engineering, with significant exposure to pre-commissioning and commissioning activities.</li> <li>Proven experience on LNG, gas processing, or large-scale oil & gas projects.</li> <li>Strong understanding of international standards (IEC, ITU, IEEE) relevant to telecom systems.</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The pre-commissioning & commissioning field instrument supervisor is responsible for supervising and executing all field instrumentation activities during the pre-commissioning and commissioning phases of a major process facility. The role ensures that instrumentation systems are installed, tested, calibrated, loop-checked, and commissioned safely, efficiently, and in accordance with project specifications and international standards.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Supervise field instrumentation activities, including installation checks, calibration, testing, and reinstatement</li> <li>Review and execute pre-commissioning procedures, check sheets, and test records</li> <li>Coordinate loop checking, functional testing, and punch listing/clearance</li> <li>Ensure correct installation and readiness of instruments, control valves, analyzers, and associated systems</li> <li>Verify compliance with project specifications, drawings, and approved vendor documentation</li> </ul> <p><strong>Commissioning phase</strong></p> <ul> <li>Support cold and hot commissioning activities for instrumentation systems</li> <li>Coordinate with commissioning engineers, operations, electrical, and DCS teams</li> <li>Troubleshoot instrumentation issues during system startup and stabilize operations</li> <li>Support logic checks, cause & effect testing, and system handover to operations</li> <li>Ensure timely closure of punch items related to instrumentation</li> </ul> <p><strong>HSE & quality</strong></p> <ul> <li>Enforce strict compliance with HSE policies, procedures, and permit to work systems</li> <li>Conduct toolbox talks and ensure safe execution of site activities</li> <li>Ensure all commissioning documentation is completed accurately and submitted on time</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise and guide technicians and subcontractors in the field</li> <li>Report daily progress, constraints, and technical issues to commissioning management</li> <li>Interface with construction, QA/QC, and client representatives as required</li> </ul> <h4>Qualifications & experience (must have)</h4> <ul> <li>Diploma or bachelor’s degree in instrumentation, control engineering, or equivalent</li> <li>Minimum 8–12 years of experience in field instrumentation, with strong exposure to pre-commissioning and commissioning</li> <li>Prior experience on large oil & gas, LNG, petrochemical, or process plant projects</li> <li>Hands-on experience with: <ul> <li>Field instruments (pressure, temperature, flow, level)</li> <li>Control valves and actuators</li> <li>Analyzers and packaged units</li> <li>Loop checking and functional testing</li> </ul> </li> <li>Strong understanding of commissioning procedures, system turnover, and punch management</li> </ul> <h4>Certifications & technical skills</h4> <ul> <li>Valid HSE certification (e.g., IOSH, NEBOSH, or equivalent)</li> <li>Familiar with international standards (IEC, ISA, API)</li> <li>Ability to read and interpret P&IDs, loop diagrams, hookups, and wiring diagrams</li> <li>Experience working with DCS/PLC systems in a commissioning environment</li> </ul> <h4>Soft skills & attributes</h4> <ul> <li>Strong leadership and field supervision skills</li> <li>Excellent coordination and communication abilities</li> <li>Problem-solving mindset with strong troubleshooting capability</li> <li>Able to work under pressure in fast paced commissioning environments</li> <li>Willingness to work extended hours and rotational site schedules</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Superintendent to supervise and manage site execution of all instrumentation related precommissioning and commissioning activities on a large LNG facility. The role is fully site based and focuses on field supervision, workforce coordination, safety, and execution readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <h4>Key responsibilities</h4> <ul> <li>Supervise and coordinate instrumentation PCC field activities in line with approved procedures and schedules</li> <li>Manage and direct instrument technicians, supervisors, and subcontractors on site</li> <li>Ensure instrumentation systems are ready for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Oversee execution of: <ul> <li>Instrument installation checks and verification</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer installation and commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) status and ensure punch list closure for instrumentation scope</li> <li>Coordinate daily activities with construction, electrical, automation, operations, HSE, and QA/QC teams</li> <li>Support DCS, ESD, F&G, and PLC testing in coordination with vendors and commissioning engineers</li> <li>Ensure strict compliance with: <ul> <li>PTW systems</li> <li>SIMOPS requirements</li> <li>HSE procedures and risk assessments</li> </ul> </li> <li>Monitor field progress, productivity, constraints, and safety performance</li> <li>Report daily and weekly status to the Instrumentation Lead / Commissioning Manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong><br> Diploma or Bachelor’s degree in Instrumentation, Control, Electrical, or related discipline</p> <p><strong>Experience</strong><br> Minimum 12 years experience in oil & gas or LNG projects<br> Proven experience as Instrumentation Superintendent or Senior Instrument Supervisor during precommissioning and commissioning phases<br> Strong hands-on site experience on large EPC projects<br> Extensive exposure to LNG or gas processing facilities<br> Candidates without direct site supervision responsibility in PCC phases will not be considered.</p> <p><strong>Technical expertise</strong><br> Strong practical knowledge of: <ul> <li>Instrumentation PCC workflows and field execution</li> <li>Loop checks, cause & effect testing, calibration, and valve testing</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> </ul> Ability to read and work from: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop drawings and hookups</li> <li>Commissioning check sheets and test packs</li> </ul> </p> <p><strong>Supervisory & professional skills</strong><br> Strong field leadership and workforce management capability<br> Safety driven mindset with solid PTW and SIMOPS experience<br> Practical, hands-on problem solver<br> Clear communication in English<br> Comfortable working in demanding, multicultural site environments</p> <p><strong>Ideal background</strong><br> EPC contractor commissioning background<br> LNG precommissioning and commissioning field leadership experience<br> Middle East project experience (preferred)</p></p><p></p>

<p><h4>Mechanical TFA – SGT-4000F / V94.3 Gas Turbine</h4> <p>We are seeking an experienced Mechanical Technical Field Advisor (TFA) with hands-on experience on Siemens SGT-4000F / V94.3 gas turbines.</p> <h4>Key Requirements:</h4> <ul> <li>Proven experience on SGT-4000F / V94.3 gas turbines.</li> <li>Strong mechanical field experience in planned outages, forced outages, inspections, and maintenance activities.</li> <li>Previous working experience with OEMs, particularly Siemens, will be highly preferred.</li> <li>Ability to support outage activities, troubleshooting, and field execution activities on site.</li> <li>Willingness to relocate and work across the Middle East.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Experience in power plant maintenance and outage execution.</li> <li>Strong communication and reporting skills.</li> <li>Ability to work in a multicultural and fast-paced environment.</li> </ul></p><p></p>

<p><h4>Mechanical TFA – SGT-4000F / V94.3 Gas Turbine</h4> <p>We are seeking an experienced Mechanical Technical Field Advisor (TFA) with hands-on experience on Siemens SGT-4000F / V94.3 gas turbines.</p> <h4>Key Requirements:</h4> <ul> <li>Proven experience on SGT-4000F / V94.3 gas turbines.</li> <li>Strong mechanical field experience in planned outages, forced outages, inspections, and maintenance activities.</li> <li>Previous working experience with OEMs, particularly Siemens, will be highly preferred.</li> <li>Ability to support outage activities, troubleshooting, and field execution activities on site.</li> <li>Willingness to relocate and work across the Middle East.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Experience in power plant maintenance and outage execution.</li> <li>Strong communication and reporting skills.</li> <li>Ability to work in a multicultural and fast-paced environment.</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a client to source a PCC HVAC superintendent. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>July 1, 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning execution</strong></p> <ul> <li>Lead and supervise all HVAC pre commissioning and commissioning activities on site</li> <li>Review and validate HVAC commissioning procedures, method statements, and test packs</li> <li>Ensure readiness of HVAC systems for commissioning, including completion of mechanical checks, punch lists, and system cleanliness</li> <li>Coordinate functional testing, performance testing, and system balancing activities</li> <li>Oversee start up, testing, and troubleshooting of HVAC equipment and systems</li> </ul> <p><strong>Technical scope</strong></p> <ul> <li>HVAC systems including: <ul> <li>Chilled water systems</li> <li>DX and packaged units</li> <li>Air handling units (AHUs)</li> <li>Ventilation and exhaust systems</li> <li>Pressurization systems</li> <li>Ducting, dampers, controls, and instrumentation</li> </ul> </li> <li>Ensure HVAC systems meet design intent, operational requirements, and applicable international standards (ASHRAE, SMACNA, NFPA, etc.)</li> <li>Interface with vendors and OEM representatives during testing and commissioning activities</li> </ul> <p><strong>Interface & coordination</strong></p> <ul> <li>Coordinate with construction, QA/QC, electrical, instrumentation, and commissioning teams</li> <li>Liaise with engineering to resolve technical queries, NCRs, and site issues</li> <li>Support system walkdowns, punch clearing, and handover to operations/client teams</li> <li>Participate in commissioning meetings, progress reviews, and readiness assessments</li> </ul> <p><strong>HSE & quality</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE plans and procedures</li> <li>Promote safe working practices and participate in toolbox talks and risk assessments</li> <li>Ensure commissioning documentation is completed accurately and in a timely manner</li> <li>Support audits, inspections, and compliance reviews as required</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Monitor and report commissioning progress against schedule</li> <li>Prepare daily / weekly activity reports</li> <li>Ensure commissioning dossiers and handover documentation are completed and approved</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree or diploma in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10–15 years of experience in HVAC systems within oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Proven experience in pre commissioning and commissioning phases on major EPC projects</li> <li>Prior experience working on LNG facilities or complex energy infrastructure projects is highly desirable</li> <li>Strong site based commissioning background in multidisciplinary environments</li> </ul> <p><strong>Technical competence</strong></p> <ul> <li>In depth knowledge of HVAC system design, installation, and commissioning</li> <li>Familiarity with international codes and standards (ASHRAE, SMACNA, NFPA, ISO, etc.)</li> <li>Ability to read and interpret P&IDs, layouts, datasheets, and commissioning procedures</li> <li>Strong troubleshooting and problem solving skills during system start up</li> </ul> <p><strong>Soft skills & attributes</strong></p> <ul> <li>Strong leadership and team coordination skills</li> <li>Effective communication with multicultural teams and stakeholders</li> <li>Proactive, organized, and able to work under schedule pressure</li> <li>Safety driven mindset with strong attention to quality and detail</li> </ul> <p>If you would like to be considered for the position, please apply directly to this advertisement with your CV.</p> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <p>Airswift are a global manpower provider specialising in the energy, infrastructure & IT sectors. Present in more than 70 countries around the world, our reach and capabilities in the markets we service is unparalleled in the industry.</p> <p>We are working with a client to source a PCC HVAC superintendent. This is a contract role working on a residential basis. Please see details below.</p> <h4>Start date</h4> <p>July 1, 2026</p> <h4>Location</h4> <p>Sohar, Oman</p> <h4>Working schedule</h4> <p>5 days per week / 10 hours per day or as per project requirements.</p> <h4>Key responsibilities</h4> <p><strong>Pre commissioning & commissioning execution</strong></p> <ul> <li>Lead and supervise all HVAC pre commissioning and commissioning activities on site</li> <li>Review and validate HVAC commissioning procedures, method statements, and test packs</li> <li>Ensure readiness of HVAC systems for commissioning, including completion of mechanical checks, punch lists, and system cleanliness</li> <li>Coordinate functional testing, performance testing, and system balancing activities</li> <li>Oversee start up, testing, and troubleshooting of HVAC equipment and systems</li> </ul> <p><strong>Technical scope</strong></p> <ul> <li>HVAC systems including: <ul> <li>Chilled water systems</li> <li>DX and packaged units</li> <li>Air handling units (AHUs)</li> <li>Ventilation and exhaust systems</li> <li>Pressurization systems</li> <li>Ducting, dampers, controls, and instrumentation</li> </ul> </li> <li>Ensure HVAC systems meet design intent, operational requirements, and applicable international standards (ASHRAE, SMACNA, NFPA, etc.)</li> <li>Interface with vendors and OEM representatives during testing and commissioning activities</li> </ul> <p><strong>Interface & coordination</strong></p> <ul> <li>Coordinate with construction, QA/QC, electrical, instrumentation, and commissioning teams</li> <li>Liaise with engineering to resolve technical queries, NCRs, and site issues</li> <li>Support system walkdowns, punch clearing, and handover to operations/client teams</li> <li>Participate in commissioning meetings, progress reviews, and readiness assessments</li> </ul> <p><strong>HSE & quality</strong></p> <ul> <li>Ensure all commissioning activities comply with project HSE plans and procedures</li> <li>Promote safe working practices and participate in toolbox talks and risk assessments</li> <li>Ensure commissioning documentation is completed accurately and in a timely manner</li> <li>Support audits, inspections, and compliance reviews as required</li> </ul> <p><strong>Reporting & documentation</strong></p> <ul> <li>Monitor and report commissioning progress against schedule</li> <li>Prepare daily / weekly activity reports</li> <li>Ensure commissioning dossiers and handover documentation are completed and approved</li> </ul> <h4>Requirements</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree or diploma in mechanical engineering or equivalent technical qualification</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10–15 years of experience in HVAC systems within oil & gas, LNG, petrochemical, or large industrial projects</li> <li>Proven experience in pre commissioning and commissioning phases on major EPC projects</li> <li>Prior experience working on LNG facilities or complex energy infrastructure projects is highly desirable</li> <li>Strong site based commissioning background in multidisciplinary environments</li> </ul> <p><strong>Technical competence</strong></p> <ul> <li>In depth knowledge of HVAC system design, installation, and commissioning</li> <li>Familiarity with international codes and standards (ASHRAE, SMACNA, NFPA, ISO, etc.)</li> <li>Ability to read and interpret P&IDs, layouts, datasheets, and commissioning procedures</li> <li>Strong troubleshooting and problem solving skills during system start up</li> </ul> <p><strong>Soft skills & attributes</strong></p> <ul> <li>Strong leadership and team coordination skills</li> <li>Effective communication with multicultural teams and stakeholders</li> <li>Proactive, organized, and able to work under schedule pressure</li> <li>Safety driven mindset with strong attention to quality and detail</li> </ul> <p>If you would like to be considered for the position, please apply directly to this advertisement with your CV.</p> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.<br> We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job purpose</h4> <p>The pre-commissioning & commissioning field instrument supervisor is responsible for supervising and executing all field instrumentation activities during the pre-commissioning and commissioning phases of a major process facility. The role ensures that instrumentation systems are installed, tested, calibrated, loop-checked, and commissioned safely, efficiently, and in accordance with project specifications and international standards.</p> <h4>Key responsibilities</h4> <p><strong>Pre-commissioning phase</strong></p> <ul> <li>Supervise field instrumentation activities, including installation checks, calibration, testing, and reinstatement</li> <li>Review and execute pre-commissioning procedures, check sheets, and test records</li> <li>Coordinate loop checking, functional testing, and punch listing/clearance</li> <li>Ensure correct installation and readiness of instruments, control valves, analyzers, and associated systems</li> <li>Verify compliance with project specifications, drawings, and approved vendor documentation</li> </ul> <p><strong>Commissioning phase</strong></p> <ul> <li>Support cold and hot commissioning activities for instrumentation systems</li> <li>Coordinate with commissioning engineers, operations, electrical, and DCS teams</li> <li>Troubleshoot instrumentation issues during system startup and stabilize operations</li> <li>Support logic checks, cause & effect testing, and system handover to operations</li> <li>Ensure timely closure of punch items related to instrumentation</li> </ul> <p><strong>HSE & quality</strong></p> <ul> <li>Enforce strict compliance with HSE policies, procedures, and permit to work systems</li> <li>Conduct toolbox talks and ensure safe execution of site activities</li> <li>Ensure all commissioning documentation is completed accurately and submitted on time</li> </ul> <p><strong>Coordination & reporting</strong></p> <ul> <li>Supervise and guide technicians and subcontractors in the field</li> <li>Report daily progress, constraints, and technical issues to commissioning management</li> <li>Interface with construction, QA/QC, and client representatives as required</li> </ul> <h4>Qualifications & experience (must have)</h4> <ul> <li>Diploma or bachelor’s degree in instrumentation, control engineering, or equivalent</li> <li>Minimum 8–12 years of experience in field instrumentation, with strong exposure to pre-commissioning and commissioning</li> <li>Prior experience on large oil & gas, LNG, petrochemical, or process plant projects</li> <li>Hands-on experience with: <ul> <li>Field instruments (pressure, temperature, flow, level)</li> <li>Control valves and actuators</li> <li>Analyzers and packaged units</li> <li>Loop checking and functional testing</li> </ul> </li> <li>Strong understanding of commissioning procedures, system turnover, and punch management</li> </ul> <h4>Certifications & technical skills</h4> <ul> <li>Valid HSE certification (e.g., IOSH, NEBOSH, or equivalent)</li> <li>Familiar with international standards (IEC, ISA, API)</li> <li>Ability to read and interpret P&IDs, loop diagrams, hookups, and wiring diagrams</li> <li>Experience working with DCS/PLC systems in a commissioning environment</li> </ul> <h4>Soft skills & attributes</h4> <ul> <li>Strong leadership and field supervision skills</li> <li>Excellent coordination and communication abilities</li> <li>Problem-solving mindset with strong troubleshooting capability</li> <li>Able to work under pressure in fast paced commissioning environments</li> <li>Willingness to work extended hours and rotational site schedules</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy Jobline Overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role Overview</h4> <p>We are seeking an experienced PCC (Pre-Commissioning & Commissioning) System Supervisor – Cybersecurity to supervise and coordinate cybersecurity related activities during pre-commissioning and commissioning phases of a large LNG facility. The role focuses on field execution, system readiness, compliance, and safe integration of OT/ICS systems prior to startup and handover to operations.</p> <p>This is a site-based supervisory role, suited to professionals with hands-on experience supporting OT cybersecurity implementation during EPC commissioning projects.</p> <h4>Key Responsibilities</h4> <ul> <li>Supervise and coordinate cybersecurity activities during pre-commissioning and commissioning phases</li> <li>Support system readiness for secure commissioning of: <ul> <li>DCS, ESD, F&G, PLC, and SCADA systems</li> <li>Network infrastructure, servers, workstations, and interfaces</li> </ul> </li> <li>Ensure cybersecurity requirements are implemented in line with: <ul> <li>Project cybersecurity standards</li> <li>OT/ICS security procedures</li> <li>Regulatory and company policies</li> </ul> </li> <li>Coordinate with automation, instrumentation, IT/OT, and commissioning teams to ensure secure system integration</li> <li>Supervise field implementation of: <ul> <li>Network segmentation and access control</li> <li>User account and privilege configuration</li> <li>Antivirus, patching, and system hardening activities</li> </ul> </li> <li>Support cybersecurity testing activities, including: <ul> <li>Vulnerability checks (as defined by project scope)</li> <li>Secure communication and access verification</li> </ul> </li> <li>Verify mechanical completion (MC) and readiness for commissioning from a cybersecurity perspective</li> <li>Support punch list identification and closeout related to cybersecurity scope</li> <li>Ensure all activities are executed in compliance with HSE, PTW (permit to work), and SIMOPS (simultaneous operations) requirements</li> <li>Report cybersecurity readiness, issues, and risks to the PCC system lead / commissioning manager</li> </ul> <h4>Mandatory Requirements (Strict)</h4> <h5>Education</h5> <p>Bachelor’s degree or diploma in cybersecurity, information technology, automation, instrumentation, electrical engineering, or related discipline.</p> <h5>Experience</h5> <ul> <li>Minimum 8–10 years experience in oil & gas or LNG projects</li> <li>Proven experience supporting OT/ICS cybersecurity during pre-commissioning and commissioning phases</li> <li>Site-based experience on large EPC projects</li> <li>Hands-on exposure to commissioning of control systems and industrial networks</li> <li>Candidates without site commissioning exposure in OT cybersecurity environments will not be considered</li> </ul> <h5>Technical Expertise</h5> <ul> <li>Practical knowledge of: <ul> <li>OT/ICS cybersecurity principles</li> <li>Industrial networks (firewalls, switches, VLANs)</li> <li>Secure commissioning of DCS, ESD, F&G, PLC systems</li> </ul> </li> <li>Familiarity with: <ul> <li>Network segmentation and access control</li> <li>System hardening and patching practices</li> <li>Cybersecurity compliance checks during commissioning</li> </ul> </li> <li>Ability to work from commissioning procedures, system dossiers, and test documentation</li> </ul> <h5>Supervisory & Professional Skills</h5> <ul> <li>Strong site coordination and supervision capability</li> <li>Good interface management with automation, instrumentation, IT/OT, and operations teams</li> <li>Safety driven mindset with PTW and SIMOPS experience</li> <li>Clear communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal Background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG or gas processing facility experience</li> <li>OT cybersecurity involvement during commissioning and startup phases</li> <li>Middle East project experience</li> </ul></p><p></p>

<ul><li><p>Review commissioning plans, test procedures, inspection records, pre-commissioning documentation, and acceptance-related submissions.</p></li><li><p>Witness start-up tests, pre-commissioning, commissioning, reliability runs, performance tests, and system readiness activities.</p></li><li><p>Coordinate commissioning interfaces with discipline engineers, contractors, grid/interface parties, QA/QC, HSE, and project management teams.</p></li><li><p>Verify test results, commissioning records, punch list status, non-conformances, and readiness for handover or taking-over activities.</p></li><li><p>Support performance verification for wind, solar PV, BESS, electrical systems, and associated infrastructure as applicable.</p></li><li><p>Prepare commissioning inputs for progress reports, technical reviews, close-out reports, and acceptance documentation.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related discipline.</p></li><li><p>Minimum 10 years of experience in commissioning power generation, renewable energy, substations, grid-connected assets, or similar infrastructure projects.</p></li><li><p>Experience with start-up tests, reliability runs, performance tests, commissioning documentation, and acceptance procedures.</p></li><li><p>Experience with wind, solar PV, BESS, or HV/MV electrical systems is preferred.</p></li><li><p>Strong knowledge of commissioning sequencing, test witnessing, punch list management, and technical reporting.</p></li><li><p>Strong coordination, problem-solving, and stakeholder communication skills.</p></li></ul>

<p><h4>Energy Jobline Overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role Overview</h4> <p>We are seeking an experienced PCC (Pre-Commissioning & Commissioning) System Supervisor – Cybersecurity to supervise and coordinate cybersecurity related activities during pre-commissioning and commissioning phases of a large LNG facility. The role focuses on field execution, system readiness, compliance, and safe integration of OT/ICS systems prior to startup and handover to operations.</p> <p>This is a site-based supervisory role, suited to professionals with hands-on experience supporting OT cybersecurity implementation during EPC commissioning projects.</p> <h4>Key Responsibilities</h4> <ul> <li>Supervise and coordinate cybersecurity activities during pre-commissioning and commissioning phases</li> <li>Support system readiness for secure commissioning of: <ul> <li>DCS, ESD, F&G, PLC, and SCADA systems</li> <li>Network infrastructure, servers, workstations, and interfaces</li> </ul> </li> <li>Ensure cybersecurity requirements are implemented in line with: <ul> <li>Project cybersecurity standards</li> <li>OT/ICS security procedures</li> <li>Regulatory and company policies</li> </ul> </li> <li>Coordinate with automation, instrumentation, IT/OT, and commissioning teams to ensure secure system integration</li> <li>Supervise field implementation of: <ul> <li>Network segmentation and access control</li> <li>User account and privilege configuration</li> <li>Antivirus, patching, and system hardening activities</li> </ul> </li> <li>Support cybersecurity testing activities, including: <ul> <li>Vulnerability checks (as defined by project scope)</li> <li>Secure communication and access verification</li> </ul> </li> <li>Verify mechanical completion (MC) and readiness for commissioning from a cybersecurity perspective</li> <li>Support punch list identification and closeout related to cybersecurity scope</li> <li>Ensure all activities are executed in compliance with HSE, PTW (permit to work), and SIMOPS (simultaneous operations) requirements</li> <li>Report cybersecurity readiness, issues, and risks to the PCC system lead / commissioning manager</li> </ul> <h4>Mandatory Requirements (Strict)</h4> <h5>Education</h5> <p>Bachelor’s degree or diploma in cybersecurity, information technology, automation, instrumentation, electrical engineering, or related discipline.</p> <h5>Experience</h5> <ul> <li>Minimum 8–10 years experience in oil & gas or LNG projects</li> <li>Proven experience supporting OT/ICS cybersecurity during pre-commissioning and commissioning phases</li> <li>Site-based experience on large EPC projects</li> <li>Hands-on exposure to commissioning of control systems and industrial networks</li> <li>Candidates without site commissioning exposure in OT cybersecurity environments will not be considered</li> </ul> <h5>Technical Expertise</h5> <ul> <li>Practical knowledge of: <ul> <li>OT/ICS cybersecurity principles</li> <li>Industrial networks (firewalls, switches, VLANs)</li> <li>Secure commissioning of DCS, ESD, F&G, PLC systems</li> </ul> </li> <li>Familiarity with: <ul> <li>Network segmentation and access control</li> <li>System hardening and patching practices</li> <li>Cybersecurity compliance checks during commissioning</li> </ul> </li> <li>Ability to work from commissioning procedures, system dossiers, and test documentation</li> </ul> <h5>Supervisory & Professional Skills</h5> <ul> <li>Strong site coordination and supervision capability</li> <li>Good interface management with automation, instrumentation, IT/OT, and operations teams</li> <li>Safety driven mindset with PTW and SIMOPS experience</li> <li>Clear communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal Background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG or gas processing facility experience</li> <li>OT cybersecurity involvement during commissioning and startup phases</li> <li>Middle East project experience</li> </ul></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced Telecom Lead Engineer to lead and manage telecommunications activities during the pre-commissioning and commissioning phases of a large-scale industrial facility. The role will involve overseeing telecom systems installation completion, testing, integration, and handover to operations, ensuring full compliance with project specifications, international standards, and safety requirements.</p> <p>The successful candidate will act as the technical authority for telecom discipline activities on site, coordinating closely with engineering, construction, commissioning, vendors, and operations teams.</p> <h4>Key responsibilities</h4> <strong>Engineering & technical leadership</strong><br> <ul> <li>Lead all telecommunications scope during pre-commissioning and commissioning phases</li> <li>Review and validate telecom engineering deliverables, including: <ul> <li>Network architecture and system layouts</li> <li>Telecom block diagrams and schematics</li> <li>Fiber optic, structured cabling, and routing drawings</li> </ul> </li> <li>Ensure systems are installed, tested, and commissioned in line with: <ul> <li>Project specifications</li> <li>Approved drawings and procedures</li> <li>Applicable international standards (IEC, ITU-T, ISO, IEEE)</li> </ul> </li> </ul> <strong>Systems scope</strong><br> <p>Responsible for the following systems, including integration and interface management:</p> <ul> <li>Telecom network infrastructure (LAN/WAN, IP/MPLS where applicable)</li> <li>Fiber optic and copper cabling systems</li> <li>Telephone systems (PABX/IP telephony)</li> <li>CCTV and video surveillance systems</li> <li>Access control and security systems</li> <li>Public address & general alarm (PAGA) systems</li> <li>Radio systems (TETRA/UHF/VHF, where applicable)</li> <li>Data and server room equipment (racks, switches, UPS interfaces)</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Develop and review: <ul> <li>Pre-commissioning check sheets</li> <li>Commissioning procedures and test scripts</li> </ul> </li> <li>Lead telecom system testing activities such as: <ul> <li>Point-to-point testing</li> <li>Loop checks</li> <li>Network performance and redundancy tests</li> <li>System integration tests</li> </ul> </li> <li>Coordinate vendor attendance and factory acceptance/site acceptance testing (FAT/SAT) support</li> <li>Monitor commissioning progress and proactively resolve technical issues</li> </ul> <strong>Site coordination & management</strong><br> <ul> <li>Act as single point of contact for telecom discipline on site</li> <li>Coordinate daily activities with: <ul> <li>Construction teams</li> <li>Commissioning teams</li> <li>Other engineering disciplines</li> <li>Client/operations representatives</li> </ul> </li> <li>Manage and support telecom engineers and technicians on site</li> <li>Participate in site walkdowns, punch listing, and system handover activities</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure compliance with: <ul> <li>Project HSE requirements</li> <li>Company quality standards</li> <li>Telecommunications industry best practices</li> </ul> </li> <li>Support preparation of telecom dossiers, test records, and handover documentation</li> <li>Close out punch items and support final system acceptance</li> </ul> <strong>Interface & reporting</strong><br> <ul> <li>Report to the Commissioning Manager/Engineering Manager</li> <li>Interface closely with: <ul> <li>Electrical, Instrumentation, and Automation teams</li> <li>IT/cybersecurity stakeholders (if applicable)</li> <li>Vendors and system integrators</li> </ul> </li> </ul> <h4>Requirements</h4> <ul> <li>Bachelor’s degree in: <ul> <li>Telecommunications Engineering</li> <li>Electrical/Electronics Engineering</li> <li>Or related discipline</li> </ul> </li> <li>Relevant professional certifications (but not mandatory)</li> <li>Minimum 10-15 years of experience in telecommunications engineering</li> <li>Proven experience as Telecom Lead Engineer on large industrial projects, preferably: <ul> <li>Oil & Gas</li> <li>LNG</li> <li>Petrochemical</li> <li>Power or heavy industrial facilities</li> </ul> </li> <li>Strong hands-on experience in pre-commissioning and commissioning phases</li> <li>Prior site-based project experience in the Middle East is highly desirable</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are hiring for IT Infrastructure Engineer - Oman Location - Oman Role &amp; Responsibilities- Design and implement complete IT infrastructure setup (LAN/WAN/Wi-Fi). Install, configure, and maintain servers (Windows/Linux). Manage Active Directory, DNS, DHCP, VLAN, Group Policies. Configure and maintain firewall, VPN, and network security. Setup and manage email systems (Microsoft 365 / Google Workspace). Implement data backup and disaster recovery solutions. Configure NAS/SAN storage and monitor capacity. Setup CCTV systems, NVR, and power backup coordination. Install and manage printers, scanners, and biometric systems. Monitor system performance and ensure high availability. Troubleshoot hardware, network, and server issues. Coordinate with vendors for procurement and AMC management. Ensure IT security compliance and regular patch updates. Maintain IT documentation and asset inventory.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Design and implement complete IT infrastructure setup (LAN/WAN/Wi-Fi). Install, configure, and maintain servers (Windows/Linux). Manage Active Directory, DNS, DHCP, VLAN, Group Policies. Configure and maintain firewall, VPN, and network security. Setup and manage email systems (Microsoft 365 / Google Workspace). Implement data backup and disaster recovery solutions. Configure NAS/SAN storage and monitor capacity. Setup CCTV systems, NVR, and power backup coordination. Install and manage printers, scanners, and biometric systems. Monitor system performance and ensure high availability. Troubleshoot hardware, network, and server issues. Coordinate with vendors for procurement and AMC management. Ensure IT security compliance and regular patch updates. Maintain IT documentation and asset inventory.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelors degree in IT / Computer Science / IT Engineering</li><li>Certifications in CCNA , Microsoft Certified , VMware Certification</li><li>Immediate candidates preferred.</li></ul><p></p></section>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<p>The Senior Power System Secondary Engineer acts as the technical authority on behalf of the project developer, providing independent oversight, review, and verification of all secondary systems engineering across utility-scale renewable energy plants (Solar PV, Wind) and Battery Energy Storage Systems (BESS). The role is pivotal in ensuring that designs delivered by EPC contractors and specialist consultants are technically sound, safe, cost-effective, and fully compliant with International Best Practices, utility / TSO requirements, and applicable International Standards (IEC, IEEE/ANSI). </p><br><p>Design Review & Verification</p><ul><li><p>Lead the review and verification of all secondary design deliverables — including Single Line</p></li></ul><p>Diagrams (SLDs), Protection & Metering Diagrams (PMDs), Block Logic Diagrams (BLDs), AC/DC</p><p>schematics, and LV System Design Documents — for HV substations and renewable plants.</p><ul><li><p>Verify protection and control philosophies, including relay settings, selectivity analyses, and</p></li></ul><p>coordination studies (short-circuit calculations, CT/VT sizing) prepared by consultants and EPC</p><p>contractors.</p><ul><li><p>Review and approve interlocking schemes, bay-level logic, and station-level automation across</p></li></ul><p>switchgear, transformers, feeders, and renewable energy plant interfaces.</p><p>Substation Automation & SCADA</p><ul><li><p>Approve substation automation and SCADA architectures, ensuring correct implementation of IED</p></li></ul><p>logic, signal lists, and interlocking schemes at bay and station levels.</p><ul><li><p>Oversee the integration and configuration of communication protocols — IEC 61850</p></li></ul><p>(GOOSE/SV/MMS), IEC 60870-5-104, and DNP3 — governing data flow between Plant Power</p><p>Controllers (PPC/EMS), substations, and utility control centers.</p><ul><li><p>Review IED configurations, substation HMI displays, and historian / data management architectures</p></li></ul><p>for completeness and compliance.</p><p>Telecommunications & Cybersecurity</p><ul><li><p>Review and validate communication and telecommunication architectures, including managed</p></li></ul><p>network design (VLANs, PRP/HSR redundancy), cybersecurity policies (IEC 62351 / NERC-CIP</p><p>aligned), and tele-protection performance requirements.</p><p>Standards, Compliance & Grid Code Adherence</p><ul><li><p>Ensure strict adherence to international standards and grid codes (IEC, IEEE/ANSI) by performing</p></li></ul><p>technical audits and vetting technical submissions to Transmission / Distribution System Operators</p><p>(TSO/DSO).</p><ul><li><p>Manage technical interfaces and coordinate between EPC contractors, engineering consultants,</p></li></ul><p>OEMs, and the grid operator to ensure a coherent and optimized secondary systems design.</p><p>Testing, Commissioning & Project Governance</p><ul><li><p>Provide technical governance during critical project phases, including witnessing Factory</p></li></ul><p>Acceptance Tests (FAT) and Site Acceptance Tests (SAT), and reviewing commissioning</p><p>procedures for all secondary systems.</p><ul><li><p>Review and approve test plans, testing protocols, punch lists, and commissioning records to ensure</p></li></ul><p>safe energization of HV substations and plant systems.</p><ul><li><p>Act as the Owner’s Engineer representative in te</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education</p><ul><li><p>Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or a closely related field.</p></li><li><p>Professional Engineering registration (PE / CEng or equivalent) is an advantage.</p></li></ul><p>Experience</p><ul><li><p>8+ years of engineering experience with a demonstrable focus on substation secondary systems</p></li></ul><p>design and delivery.</p><ul><li><p>Significant experience in a developer, owner’s engineer, or utility role with direct responsibility for</p></li></ul><p>managing and challenging EPC contractor deliverables.</p><ul><li><p>Proven track record on grid-connected utility-scale renewable energy projects (Solar PV, Wind)</p></li></ul><p>and/or Battery Energy Storage Systems (BESS).</p><ul><li><p>Experience working across the full project lifecycle from FEED and detailed design through to FAT,</p></li></ul><p>SAT, and commercial operation</p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<p>Electrical Activities:</p><ul><li><p>Installation of Electrical systems including power, lighting, earthing & Lightning protection.</p></li><li><p>Cable tray, conduit , cabling & termination works.</p></li><li><p>Installation of DBs, MDBs, SMDBs & associated equipment.</p></li><li><p>Fire alarm, emergency lighting & other ELV system installation.</p></li><li><p>Testing, commissioning & handover of electrical systems.</p></li><li><p>Ensure compliance with drawings, specifications & safety standards.</p></li><li><p>Coordinate with other trades and maintain site progress.</p></li></ul><p>Plumbing Activities:</p><ul><li><p>Installation of cold & hot water supply systems.</p></li><li><p>Installation of sanitary drainage, waste & vent systems</p></li><li><p>Installation of soil, waste, rainwater (SWR) & storm water systems</p></li><li><p>Installation of fixtures, fittings & plumbing accessories.</p></li><li><p>Testing, flushing & commissioning of plumbing systems.</p></li><li><p>Ensure compliance with drawings, specifications & standards</p></li><li><p>Coordinate with other trades and maintain site progress</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Electrical Engineering, ensuring a strong foundational knowledge of MEP systems.</p></li><li><p>Minimum of 5 years of experience in MEP engineering, with a proven track record in commercial or industrial projects.</p></li><li><p>Professional Engineering (PE) license or similar certification, demonstrating recognized expertise in the field.</p></li><li><p>Experience with Building Information Modeling (BIM) software, such as Revit, to facilitate advanced design processes.</p></li></ul>