Plumbing Engineer

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced Telecom Lead Engineer to lead and manage telecommunications activities during the pre-commissioning and commissioning phases of a large-scale industrial facility. The role will involve overseeing telecom systems installation completion, testing, integration, and handover to operations, ensuring full compliance with project specifications, international standards, and safety requirements.</p> <p>The successful candidate will act as the technical authority for telecom discipline activities on site, coordinating closely with engineering, construction, commissioning, vendors, and operations teams.</p> <h4>Key responsibilities</h4> <strong>Engineering & technical leadership</strong><br> <ul> <li>Lead all telecommunications scope during pre-commissioning and commissioning phases</li> <li>Review and validate telecom engineering deliverables, including: <ul> <li>Network architecture and system layouts</li> <li>Telecom block diagrams and schematics</li> <li>Fiber optic, structured cabling, and routing drawings</li> </ul> </li> <li>Ensure systems are installed, tested, and commissioned in line with: <ul> <li>Project specifications</li> <li>Approved drawings and procedures</li> <li>Applicable international standards (IEC, ITU-T, ISO, IEEE)</li> </ul> </li> </ul> <strong>Systems scope</strong><br> <p>Responsible for the following systems, including integration and interface management:</p> <ul> <li>Telecom network infrastructure (LAN/WAN, IP/MPLS where applicable)</li> <li>Fiber optic and copper cabling systems</li> <li>Telephone systems (PABX/IP telephony)</li> <li>CCTV and video surveillance systems</li> <li>Access control and security systems</li> <li>Public address & general alarm (PAGA) systems</li> <li>Radio systems (TETRA/UHF/VHF, where applicable)</li> <li>Data and server room equipment (racks, switches, UPS interfaces)</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Develop and review: <ul> <li>Pre-commissioning check sheets</li> <li>Commissioning procedures and test scripts</li> </ul> </li> <li>Lead telecom system testing activities such as: <ul> <li>Point-to-point testing</li> <li>Loop checks</li> <li>Network performance and redundancy tests</li> <li>System integration tests</li> </ul> </li> <li>Coordinate vendor attendance and factory acceptance/site acceptance testing (FAT/SAT) support</li> <li>Monitor commissioning progress and proactively resolve technical issues</li> </ul> <strong>Site coordination & management</strong><br> <ul> <li>Act as single point of contact for telecom discipline on site</li> <li>Coordinate daily activities with: <ul> <li>Construction teams</li> <li>Commissioning teams</li> <li>Other engineering disciplines</li> <li>Client/operations representatives</li> </ul> </li> <li>Manage and support telecom engineers and technicians on site</li> <li>Participate in site walkdowns, punch listing, and system handover activities</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure compliance with: <ul> <li>Project HSE requirements</li> <li>Company quality standards</li> <li>Telecommunications industry best practices</li> </ul> </li> <li>Support preparation of telecom dossiers, test records, and handover documentation</li> <li>Close out punch items and support final system acceptance</li> </ul> <strong>Interface & reporting</strong><br> <ul> <li>Report to the Commissioning Manager/Engineering Manager</li> <li>Interface closely with: <ul> <li>Electrical, Instrumentation, and Automation teams</li> <li>IT/cybersecurity stakeholders (if applicable)</li> <li>Vendors and system integrators</li> </ul> </li> </ul> <h4>Requirements</h4> <ul> <li>Bachelor’s degree in: <ul> <li>Telecommunications Engineering</li> <li>Electrical/Electronics Engineering</li> <li>Or related discipline</li> </ul> </li> <li>Relevant professional certifications (but not mandatory)</li> <li>Minimum 10-15 years of experience in telecommunications engineering</li> <li>Proven experience as Telecom Lead Engineer on large industrial projects, preferably: <ul> <li>Oil & Gas</li> <li>LNG</li> <li>Petrochemical</li> <li>Power or heavy industrial facilities</li> </ul> </li> <li>Strong hands-on experience in pre-commissioning and commissioning phases</li> <li>Prior site-based project experience in the Middle East is highly desirable</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Energy jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job summary</h4> <p>We are seeking an experienced Telecom Lead Engineer to lead and manage telecommunications activities during the pre-commissioning and commissioning phases of a large-scale industrial facility. The role will involve overseeing telecom systems installation completion, testing, integration, and handover to operations, ensuring full compliance with project specifications, international standards, and safety requirements.</p> <p>The successful candidate will act as the technical authority for telecom discipline activities on site, coordinating closely with engineering, construction, commissioning, vendors, and operations teams.</p> <h4>Key responsibilities</h4> <strong>Engineering & technical leadership</strong><br> <ul> <li>Lead all telecommunications scope during pre-commissioning and commissioning phases</li> <li>Review and validate telecom engineering deliverables, including: <ul> <li>Network architecture and system layouts</li> <li>Telecom block diagrams and schematics</li> <li>Fiber optic, structured cabling, and routing drawings</li> </ul> </li> <li>Ensure systems are installed, tested, and commissioned in line with: <ul> <li>Project specifications</li> <li>Approved drawings and procedures</li> <li>Applicable international standards (IEC, ITU-T, ISO, IEEE)</li> </ul> </li> </ul> <strong>Systems scope</strong><br> <p>Responsible for the following systems, including integration and interface management:</p> <ul> <li>Telecom network infrastructure (LAN/WAN, IP/MPLS where applicable)</li> <li>Fiber optic and copper cabling systems</li> <li>Telephone systems (PABX/IP telephony)</li> <li>CCTV and video surveillance systems</li> <li>Access control and security systems</li> <li>Public address & general alarm (PAGA) systems</li> <li>Radio systems (TETRA/UHF/VHF, where applicable)</li> <li>Data and server room equipment (racks, switches, UPS interfaces)</li> </ul> <strong>Pre-commissioning & commissioning activities</strong><br> <ul> <li>Develop and review: <ul> <li>Pre-commissioning check sheets</li> <li>Commissioning procedures and test scripts</li> </ul> </li> <li>Lead telecom system testing activities such as: <ul> <li>Point-to-point testing</li> <li>Loop checks</li> <li>Network performance and redundancy tests</li> <li>System integration tests</li> </ul> </li> <li>Coordinate vendor attendance and factory acceptance/site acceptance testing (FAT/SAT) support</li> <li>Monitor commissioning progress and proactively resolve technical issues</li> </ul> <strong>Site coordination & management</strong><br> <ul> <li>Act as single point of contact for telecom discipline on site</li> <li>Coordinate daily activities with: <ul> <li>Construction teams</li> <li>Commissioning teams</li> <li>Other engineering disciplines</li> <li>Client/operations representatives</li> </ul> </li> <li>Manage and support telecom engineers and technicians on site</li> <li>Participate in site walkdowns, punch listing, and system handover activities</li> </ul> <strong>Quality, safety & compliance</strong><br> <ul> <li>Ensure compliance with: <ul> <li>Project HSE requirements</li> <li>Company quality standards</li> <li>Telecommunications industry best practices</li> </ul> </li> <li>Support preparation of telecom dossiers, test records, and handover documentation</li> <li>Close out punch items and support final system acceptance</li> </ul> <strong>Interface & reporting</strong><br> <ul> <li>Report to the Commissioning Manager/Engineering Manager</li> <li>Interface closely with: <ul> <li>Electrical, Instrumentation, and Automation teams</li> <li>IT/cybersecurity stakeholders (if applicable)</li> <li>Vendors and system integrators</li> </ul> </li> </ul> <h4>Requirements</h4> <ul> <li>Bachelor’s degree in: <ul> <li>Telecommunications Engineering</li> <li>Electrical/Electronics Engineering</li> <li>Or related discipline</li> </ul> </li> <li>Relevant professional certifications (but not mandatory)</li> <li>Minimum 10-15 years of experience in telecommunications engineering</li> <li>Proven experience as Telecom Lead Engineer on large industrial projects, preferably: <ul> <li>Oil & Gas</li> <li>LNG</li> <li>Petrochemical</li> <li>Power or heavy industrial facilities</li> </ul> </li> <li>Strong hands-on experience in pre-commissioning and commissioning phases</li> <li>Prior site-based project experience in the Middle East is highly desirable</li> </ul> <p>If you are interested in applying for this job please press the apply button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.</p></p><p></p>

<p><h4>Location</h4> <p>Sohar, Oman</p> <h4>Work status</h4> <p>Resident (5 days per week)</p> <h4>Start date</h4> <p>July 2026</p> <h4>Service duration</h4> <p>12 months (renewable)</p> <h4>Qualification</h4> <ul> <li>LNG project experience is a must</li> <li>Process/Chemical engineer with proven experience (more than 10 years) in gas treatment and/or LNG plants detailed design, including licensors</li> <li>Professional experience: several years of proven experience in EPSCC and operation stages of gas treatment projects, including process simulation</li> <li>Strong teamwork and communication skills</li> <li>Knowledge of project development and methods used to submit dossier to state expertise, permitting process, and technical approval</li> <li>Fluent in English</li> </ul> <h4>The service holder is accountable for</h4> <ul> <li>The performance of the LNG plant process in continuity with the detailed engineering results</li> <li>The control of eventual shareholder technical support (cryogenic expert and AGRU licensed expert)</li> <li>Frequent technical alignment between start-up team and field operation when relevant</li> <li>Communication to shareholders for process matters related</li> </ul></p><p></p>

<p><h4>Location</h4> <p>Sohar, Oman</p> <h4>Work status</h4> <p>Resident (5 days per week)</p> <h4>Start date</h4> <p>July 2026</p> <h4>Service duration</h4> <p>12 months (renewable)</p> <h4>Qualification</h4> <ul> <li>LNG project experience is a must</li> <li>Process/Chemical engineer with proven experience (more than 10 years) in gas treatment and/or LNG plants detailed design, including licensors</li> <li>Professional experience: several years of proven experience in EPSCC and operation stages of gas treatment projects, including process simulation</li> <li>Strong teamwork and communication skills</li> <li>Knowledge of project development and methods used to submit dossier to state expertise, permitting process, and technical approval</li> <li>Fluent in English</li> </ul> <h4>The service holder is accountable for</h4> <ul> <li>The performance of the LNG plant process in continuity with the detailed engineering results</li> <li>The control of eventual shareholder technical support (cryogenic expert and AGRU licensed expert)</li> <li>Frequent technical alignment between start-up team and field operation when relevant</li> <li>Communication to shareholders for process matters related</li> </ul></p><p></p>

<p><h4>Mechanical TFA – SGT-4000F / V94.3 Gas Turbine</h4> <p>We are seeking an experienced Mechanical Technical Field Advisor (TFA) with hands-on experience on Siemens SGT-4000F / V94.3 gas turbines.</p> <h4>Key Requirements:</h4> <ul> <li>Proven experience on SGT-4000F / V94.3 gas turbines.</li> <li>Strong mechanical field experience in planned outages, forced outages, inspections, and maintenance activities.</li> <li>Previous working experience with OEMs, particularly Siemens, will be highly preferred.</li> <li>Ability to support outage activities, troubleshooting, and field execution activities on site.</li> <li>Willingness to relocate and work across the Middle East.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Experience in power plant maintenance and outage execution.</li> <li>Strong communication and reporting skills.</li> <li>Ability to work in a multicultural and fast-paced environment.</li> </ul></p><p></p>

<p><h4>Mechanical TFA – SGT-4000F / V94.3 Gas Turbine</h4> <p>We are seeking an experienced Mechanical Technical Field Advisor (TFA) with hands-on experience on Siemens SGT-4000F / V94.3 gas turbines.</p> <h4>Key Requirements:</h4> <ul> <li>Proven experience on SGT-4000F / V94.3 gas turbines.</li> <li>Strong mechanical field experience in planned outages, forced outages, inspections, and maintenance activities.</li> <li>Previous working experience with OEMs, particularly Siemens, will be highly preferred.</li> <li>Ability to support outage activities, troubleshooting, and field execution activities on site.</li> <li>Willingness to relocate and work across the Middle East.</li> </ul> <h4>Preferred Qualifications:</h4> <ul> <li>Experience in power plant maintenance and outage execution.</li> <li>Strong communication and reporting skills.</li> <li>Ability to work in a multicultural and fast-paced environment.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Role: Operations, Maintenance &amp; Support - Other</b></p><p>Industry Type: Oil &amp; Gas</p><p>Department: Production, Manufacturing &amp; Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Operations, Maintenance &amp; Support</p><p>Education</p><p>UG: B.Tech / B.E. in Mechanical Engineering, Civil</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>At Eni , we are looking for a Contract Engineer to join Eni Oman B.V. i n Muscat . You will be responsible for managing procurement and contracting activities for works, materials and services, including contract strategy development, tendering, commercial evaluations, contract negotiations and award processes, ensuring compliance with company procedures and delivery of cost-effective, high-quality outcomes. Main responsibilities: Develop and implement contract and procurement strategies for goods, works and services. Prepare and manage tender processes, including tender documentation, bidder evaluations and contract awards. Conduct commercial and contractual evaluations, negotiations and recommendation processes. Draft and review contract documentation, ensuring compliance with company requirements, policies and applicable legislation. Identify procurement opportunities, challenge business requirements and propose cost-effective solutions. Perform market analysis and supplier assessments to support sourcing decisions. Manage the full contract lifecycle in coordination with internal stakeholders. Maintain accurate procurement and contract records and reporting. Drive continuous improvement in contracting and procurement practices. Ensure compliance with the Company's Code of Ethics, procurement procedures and governance requirements. Skills and experience required: Proficiency in MS Office (Word, Excel, PowerPoint and Outlook). Experience with SAP MM and SRM modules is an advantage. Experience working on complex projects, preferably in the oil and gas sector. Strong understanding of international contracts and project governance. Strong negotiation and stakeholder management skills. CIPS qualification is desirable. Required Competencies Knowledge of oilfield contracts, procurement processes and equipment. Strong commercial awareness and market knowledge. Excellent analytical, auditing and problem-solving skills. High attention to detail and performance orientation. Ability to work independently and collaboratively. Strong interpersonal skills and ability to work in multicultural environments. High level of professional and personal integrity. How to apply: Applications are only accepted through our online application system. Please upload your CV in English .</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualifications and Experience Extensive experience in the oil and gas industry, including relevant experience in contracting and procurement. Excellent written and spoken English. Knowledge of Arabic would be an advantage.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide expert technical engineering leadership and operational support for OQEP's offshore facility facilities, including piping systems in processing plants and production platforms, under the direction of the Manager Operation &amp; Maintenance Support, ensuring safe, reliable, available and efficient operations across Upstream Surface Operations. The role delivers robust technical judgement, innovative engineering solutions and operability, availability and reliability assessments for off shore facility, evaluating modification and innovation proposals against project requirements, engineering standards and operational integrity. It provides hands-on operational support, technical troubleshooting and readiness assurance for assigned assets, while acting as the operations interface with projects, procurement, supply and other stakeholders. The role also mentors and develops production and junior engineers into self-sufficient performers, embeds common engineering principles across teams, and drives operational excellence, safety and reliability across OQEP's surface operations facilities.</p><p>The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main Tasks and Responsibilities</strong></p><p>Provide robust technical engineering expertise and innovative solutions for the execution and operation of offshore facility (piping systems in processing plants and production platforms), ensuring teams apply common engineering principles and concepts.</p><p>Lead and deliver operability, availability and reliability assessments on systems related to offshore facility, providing robust technical judgement on modification and innovation proposals in line with project requirements, engineering standards, safety and reliability.</p><p>Handle a large scope of concurrent engineering activities and projects, prioritizing and delivering high-quality technical outputs across multiple assets simultaneously.</p><p>Analyze complex technical, operational and reliability issues on offshore facility and recommend solutions that significantly improve safety, availability and performance.</p><p>Provide operational support for offshore facility (piping systems in processing plants and production platforms) at Upstream Surface Operations.</p><p>Deliver assigned operational duties and tasks for the assets, including technical support, troubleshooting, backup and other services to operate applicable hardware, systems software and application software.</p><p>Modify and improve engineering processes, standards, operating procedures and technical documentation to enhance reliability, integrity and operational efficiency.</p><p>Measure and assure progress towards the state of Operational Readiness to Operate (ORA), ensuring readiness for safe and efficient operations at the site.</p><p>Act as the Operations interface to manage procurement and supply issues, ensuring timely availability of technical materials, spares and services.</p><p>Act as the ORA interface to engage and coordinate with different stakeholders across the function on readiness, technical and operational matters.</p><p>Provide technical leadership, guidance and review to junior engineers, trainees and teams on engineering principles, standards and operational practices.</p><p>Mentor and coach production engineers and staff to build capability and develop them into self-sufficient, high-performing engineers.</p><p>Convince and influence internal stakeholders, projects and vendors to adopt sound engineering solutions, operability improvements and reliability-centred practices.</p><p>Support incident investigation, root cause analysis and corrective actions for offshore facility reliability and integrity issues.</p><p>Support planning, budgeting, forecasting and reporting for operations support engineering activities and embed KPIs in day-to-day work.</p><p>Perform other similar duties as assigned by the Manager Operation &amp; Maintenance Support.</p><p><strong>Key interactions</strong></p><p>Internal: Surface Operations, Operation &amp; Maintenance Support, Well Delivery, Projects Delivery, Technical Services, HSSE, Contract &amp; Procurement, and all relevant operational and support functions.</p><p>External: EPC and engineering contractors, equipment and piping vendors, OEMs, technical service providers, and specialist engineering consultants.</p><p><strong>Notable Working Conditions</strong>. Combination of office and field/plant environment; regular presence at processing plants and production platforms; intensive computer screen use; exposure to operational site conditions; occasional after-hours support for operational and readiness matters.</p><p><strong>Education Requirements</strong></p><p>Required: Bachelor's degree in Mechanical, Chemical, Process, Petroleum or a related Engineering discipline. Relevant post-degree qualification or professional engineering certification is preferred. Master's degree is a plus.</p><p><strong>Language</strong></p><p>Excellent knowledge of written, read and spoken English (required). Arabic is a plus.</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><p>8+ years' experience in Operations Support, Surface Operations, Process/Facilities Engineering or Production Engineering, preferably in the oil &amp; gas, energy or large industrial sector.</p><p>Proven track record of providing technical engineering leadership and operational support for offshore facility.</p><p>Strong experience in:</p><p>offshore facility and piping systems (processing plants and production platforms).</p><p>Operability, availability and reliability engineering.</p><p>Operational Readiness Assurance (ORA) and readiness-to-operate assessments.</p><p>Technical troubleshooting and operational support.</p><p>Modification and innovation proposal review against engineering standards.</p><p>Incident investigation and root cause analysis.</p><p>Engineering standards, codes and operating procedures.</p><p>Procurement and supply interface for technical materials and services.</p><p>Mentoring and developing junior engineers and Omani national talent.</p><p><br></p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Mechanical, Chemical, Process, Petroleum or a related Engineering discipline.</li><li>Relevant post-degree qualification or professional engineering certification is preferred.</li><li>Master's degree is a plus.</li><li>Excellent knowledge of written, read and spoken English (required). Arabic is a plus.</li><li>8+ years' experience in Operations Support, Surface Operations, Process/Facilities Engineering or Production Engineering, preferably in the oil &amp; gas, energy or large industrial sector.</li><li>Proven track record of providing technical engineering leadership and operational support for offshore facility.</li><li>Strong experience in: offshore facility and piping systems (processing plants and production platforms), Operability, availability and reliability engineering, Operational Readiness Assurance (ORA) and readiness-to-operate assessments, Technical troubleshooting and operational support, Modification and innovation proposal review against engineering standards, Incident investigation and root cause analysis, Engineering standards, codes and operating procedures, Procurement and supply interface for technical materials and services, Mentoring and developing junior engineers and Omani national talent.</li><li><strong>Behavioural Competencies:</strong> Strong technical and analytical problem-solving skills. Sound engineering judgement and decision-making. Maintaining effective, accurate and transparent communication with all stakeholders. Attention to detail and safety-first mindset. Planning and prioritization across multiple activities. Negotiation and influencing. Ethics, integrity and compliance. Engages and inspires colleagues to collaborate and share knowledge. Pursues innovation and continuous improvement. Acts as an agent for change, constructively challenging the status quo. Mentoring and coaching capability. Composure under operational and readiness pressure.</li><li><strong>Technical Competencies:</strong> Offshore facility and piping systems engineering (processing plants and production platforms). Operability, availability and reliability engineering. Operational Readiness Assurance (ORA) and readiness-to-operate. Technical troubleshooting and operational support. Modification/innovation proposal review and technical judgement. Engineering standards, codes and operating procedures. Incident investigation and root cause analysis (RCA). Process safety and asset integrity awareness. Procurement and supply interface for technical materials. Hardware, systems software and application software for operations. Excellent business and technical report writing skills. Very good knowledge of PC software and engineering tools.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide strong / robust engineering support in all aspects of Safety for all assigned sites under TL Central Safety scope s; through (1) Critically assessing RPI Safety performance, (2) Developing strategic and operational safety plans and processes, and (3) Designing and implementing safety systems, procedures, and equipment that are integrated into the design of a product or system adopting the industry best practices and safety compliance within OQ System (HSE), and (4) ; identifying and analyzing potential safety hazards and developing solutions to mitigate or eliminate them, in order to ensure that systems meet safety standards and regulations.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Main tasks and responsibilities</p><ul><li>Critically assessing RPI Safety performance,</li><li>Developing strategic and operational safety plans and processes,</li><li>Designing and implementing safety systems, procedures, and equipment that are integrated into the design of a product or system adopting the industry best practices and safety compliance within OQ System (HSE),</li><li>Identifying and analysing potential safety hazards and developing solutions to mitigate or eliminate them,</li><li>Ensure that systems meet safety standards and regulations</li><li>Technical and Engineering support for all sites and plants and facilities including Terminal, and any other location in terms of project and development.</li><li>Take a lead in the development and implementation of Safety objectives, policies, processes, strategies, tactics, and standard operating procedures (SOP) to ensure all relevant procedural/legislative requirements are fulfilled.</li><li>Work in conjunction with various departments to assure implementation of HSE Management System.</li><li>Accountable for development and communication of all safety aspects of the OQ RPI periodical HSSE / Sustainability Performance Letter and Report.</li><li>Work in conjunction with other specialists to develop and monitor annual Safety Targets, identifying business impacts and developing control strategies that ensure the company goal of continuous improvement is managed and delivered.</li><li>Based on RPI HSE performance and industry direction develop strategic safety plans that effectively integrate into the overall OQ HSSE strategic plan.</li><li>Work in conjunction with Safety, Environment, and Fire Services Departments, focusing on the P.D.C.A. continual improvement cycle, to develop operational plans that can be practically executed by others within OQ.</li><li>Establish network with HSE Committee, Trade Associations, and Regulatory Authorities as applicable, at all RPI sites/locations align with Communication Department.</li><li>Develop and take ownership of all safety aspects of the RPI HSEMS.</li><li>Lead/participate in all critical incident investigations as required, providing necessary technical expert advice that supports the identification of system causes and sustainable rectification measures.</li><li>Work in conjunction with Fire Services &amp; Environment Department, ensuring all serious potential safety risks, and issues are considered and effectively mitigated.</li><li>Provide advice &amp; support for major/minor Projects and changes to facilities, to ensure all safety risks are identified and mitigated appropriately.</li><li>Understands MOC (Management of Change) process and provides technical advice on safety aspects as needed.</li><li>Provide technical support for Hazard, Risk Assessment, and Impact Assessment studies for facility expansions or as needed.</li><li>Expert in contractor management system to ensure the company requirement is followed by the contractors.</li><li>Well versed with risk assessment methodologies (QRA, HAZOP, HAZID, What-If etc) and give expert advice accordingly.</li><li>Take a lead on implementation of ISO certifications (ISO 9001, 14001, 45001)</li><li>Audit/verify reports to ensure accurate reporting, problem solving, hazard identification and to take necessary precautions</li><li>Supervises the preparation of timely and accurate Safety reports which conform to Company and department requirements, policies, and standards</li><li>Prepare technical material for Safety Trainings and assure capability from HSE Trainer to deliver all trainings as per HSE Training Matrix.</li><li>Develop safety competency criteria and training materials that ensure effective execution and improved competency for all relevant personnel.</li><li>Guide team through an effective culture change focus on meeting HSSE objectives.</li><li>Well versed with Safety software s to support HSE related data development &amp; further analysis.</li><li>Provide required mentoring and coaching to team member to develop their competencies and skill as per department plan.</li><li>Any other tasks assigned by line manager to achieve department objectives.</li></ul><p>Key interactions</p><ul><li>Internal: Within the department and plant personnel up to Managers level and other RPI functions/departments and Contractors</li><li>External: SIPC, ROP, Service Providers, Consultants</li></ul><p>Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Qualifications for this position is a Bachelor Degree in Engineering in relevant field</li><li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li><li>6-8 years of relevant experience</li><li>Experience in Oil and Gas industry preferable in Refinery, Petrochemical, and Petroleum processes.</li><li>Knowledge of main Safety procedures</li><li>Experience in the field of managing Safety aspects in Petrochemical, Oil &amp; Gas industries.</li><li>Fundamentals of HSSE - Comprehensive knowledge of occupational safety. Detailed understanding of general industry standards and the requirements of the more frequently referenced standards. Includes deep knowledge of basic safety concepts such as hazard and risk assessment, personal protective equipment, behaviour-based safety, machine/ equipment safety, confined space entry, etc.</li><li>Occupational Health &amp; Safety Management System-</li><li>Experience in HSE audits.</li><li>Knowledge of ISO 45001 and RC14001.</li><li>Knowledge of risk management methods and practices.</li><li>Knowledge of HAZOP or similar studies.</li><li>Detail knowledge about contractor HSSE Management procedure.</li><li>Thorough understanding on Incident Management.</li><li>Thorough understanding of HSSE performance management process.</li><li>Through experience on HSSE Training program development and management.</li><li>Through experience on Permit to Work Process.</li><li>Knowledge on Oman regulations pertaining to HSSE.</li><li>Soft:<ul><li>People management</li><li>Planning and organizing</li><li>Communication</li><li>Integration</li><li>Presentation</li><li>Analytical thinking</li><li>Record keeping</li><li>Persuasive Communication</li><li>Coaching</li></ul></li><li>Technical:<ul><li>Proficiency in M/S Office</li><li>Quantitative &amp; Qualitative Risk Assessment (QRA)</li><li>Evidence searches and analysis</li><li>Ability to review, engineering documents, P&amp;ID, PFD</li><li>HAZOP &amp; HAZID</li><li>Root cause analysis</li><li>Investigations, Reporting, Documentation</li><li>Technical writing,</li><li>Establishes priorities and works with minimal direction.</li><li>Self-motivated and uses initiative and judgment to attain the best results.</li><li>Ability to prepare, update and draft policies, procedures and guidelines</li></ul></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As part of the technical team, responsible for ensuring the most competitive and appropriate cable designs for each situation, considering OCI s needs and capabilities, and the customers needs. Summary of the Job Role : Design cables in accordance with the parameters provided by applicable standards, customers and OCI. To support OCI s strategic goals and tendering, provide customer support and support Production. Key Deliverables to and through the Head of Department : PRE ORDER Cooperate with the marketing team in responding timeously to customer enquiries for cables. Understand the technical requirements of the customer in terms of cable and design the cable as per requirements. Analyse the customer needs to understand the requirements as per OCI technical feasibility and provide feedback to marketing team accordingly. Identify all aspects requiring clarification and participate in technical communications and meetings with customers to ensure the customers needs can be met and will be met. Prepare raw material specifications as and when required. You will be responsible to provide the technical data sheets as and whenever required by customers. Prepare and upload the design sheets / BOMs for the raw materials required for production of cable in the ERP for the use of financial and marketing teams. Coordinate with R&amp;D for all development, and with QC for additional testing that may be required. Ensure daily activities are distributed to team members. Risk assessment &amp; mitigation. Design calculations CYMCAP, Cable Sizing, Ampacity, Short Circuit Rating etc. POST ORDER Perform Contract review after order confirmation to clarify and finalize through marketing department any ambiguities in the purchase orders. Prepare the CA Family, Item codes &amp; CMS (Cable Manufacturing Specification) as per the purchase order and transfer the information to production team to for final production. Generate the information needed for the MES as and when required. You will be responsible review the CMSs prepared by Design Engineers before sending it to production. Prepare designs in a format suitable for driving the MES. Work with New Product Development team, Material &amp; Lab teams, Operation &amp; Procurement team. Take lead on CSI, DTC &amp; Sustainability activities. Substitute managers responsibility as and when required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree or diploma in electrical engineering.</li><li>Must have knowledge of MS Office, AutoCAD, SolidWorks &amp; CYMCAP.</li><li>Must have knowledge of Fictitious calculation &amp; Bill of Material calculation for LV, MV &amp; Instrumentation cables.</li><li>Must have understanding about cable manufacturing &amp; design for various cables like LV, MV &amp; Instrumentation cables as per IEC, BS, HD, AUS/NZ standards.</li><li>Attention for details &amp; analytical skills.</li><li>Strong Communication skills &amp; collaboration skills in an internation.</li><li>Ability to work independently &amp; perform well under-pressure.</li><li>Decision making &amp; team player.</li><li>Degree: 3+ years of experience as a power cable design engineer.</li><li>Diploma: 5+ years of experience as a power cable design engineer.</li><li>Knowledge of costing software.</li><li>Knowledge of software for cable designing.</li><li>Knowledge of cables used for Oil &amp; Gas, Power Grids and Renewable.</li><li>Study &amp; analyzing cable market trends.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under direct supervision, the Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: HSE Engineer (Health, Safety &amp; Environment Engineer)</p><p>Reports To: HSE Manager / Operations Manager</p><p>Job Details</p><p>Number of Vacancies: 3 Positions</p><p>Salary Range: OMR [REDACTED] per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The HSE Engineer is responsible for ensuring a safe working environment by developing, implementing, and monitoring health, safety, and environmental policies and procedures. The role focuses on risk reduction, regulatory compliance, and promoting a strong safety culture across all operations.</p><p>Key Responsibilities</p><ul><li>Develop, implement, and maintain HSE policies, procedures, and safety programs.</li><li>Conduct risk assessments, hazard identification, and job safety analyses (JSA).</li><li>Monitor workplace activities to ensure compliance with safety and environmental regulations.</li><li>Conduct safety inspections, audits, and site walkthroughs.</li><li>Investigate incidents, accidents, and near-misses, and prepare detailed reports with corrective actions.</li><li>Ensure compliance with local regulations and international safety standards.</li><li>Deliver safety training, toolbox talks, and awareness programs for employees and contractors.</li><li>Maintain HSE documentation, records, and reporting systems.</li><li>Support emergency response planning, drills, and preparedness activities.</li><li>Monitor environmental performance and ensure proper waste management and pollution control practices.</li><li>Coordinate with operations, maintenance, and project teams to ensure safe work practices.</li><li>Recommend improvements to reduce risks and improve workplace safety culture.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Qualifications</b><br>Bachelor s Degree in Environmental Engineering, Safety Engineering, Occupational Health &amp; Safety, Chemical Engineering, or a related field.<br><b>Experience</b><br>Practical Experience: 0 (No prior work experience required)<br>Internship or academic experience in HSE or safety-related activities is an advantage.<br><b>Technical Skills</b><br>Basic understanding of HSE management systems (ISO 45001, ISO 14001).<br>Awareness of risk assessment and safety procedures.<br>Basic knowledge of incident reporting and investigation methods.<br>Ability to assist in safety inspections and training activities.<br>Understanding of environmental compliance concepts.<br>Basic proficiency in Microsoft Office and reporting tools.<br><b>Soft Skills</b><br>Strong willingness to learn and develop professionally.<br>Good communication and teamwork abilities.<br>Strong attention to detail.<br>Ability to follow procedures and work under supervision.<br>Basic problem-solving mindset.<br><b>Working Conditions</b><br>Office, field, and site-based environments. May require site inspections and participation in safety drills and emergency situations.<br><b>Application Note :</b><br>The applicant must be a job seeker.<br>The applicant must be an Omani national.<br>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.<br>The applicant must not have previously benefited from any training program funded by either the public or private sector.<br>The applicant must have no more than three (3) years of work experience.<br>The applicant must not be more than 38 years of age</p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector. Job Title: Project Engineer Reports To: Project Manager / Engineering Manager Job Details Number of Vacancies: 1 Position Salary Range: OMR PHONE_NUMBER per month Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate) Job Purpose The Project Engineer is responsible for planning, coordinating, and executing engineering projects to ensure they are completed safely, on time, within budget, and in accordance with technical specifications and quality standards.</p><p>Key Responsibilities Assist in the planning, scheduling, and execution of engineering and technical projects. Coordinate project activities with internal departments, contractors, consultants, and vendors. Monitor project progress and ensure compliance with project schedules, budgets, and technical requirements. Prepare project documentation, reports, specifications, drawings, and progress updates. Review engineering designs, technical documents, and project deliverables. Support procurement activities by reviewing technical specifications and evaluating vendor proposals. Conduct site inspections and supervise project implementation activities. Identify project risks and support the development of mitigation plans. Ensure compliance with company policies, safety regulations, quality standards, and industry best practices. Participate in project meetings and provide technical recommendations and solutions. Assist with project testing, commissioning, handover, and closeout activities. Maintain accurate project records and documentation throughout the project lifecycle.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Bachelor s Degree in Engineering (Civil, Mechanical, Electrical, Electronics, Telecommunications, Industrial, or related engineering discipline).</p><h2>Experience</h2><p>Practical Experience: 0 (No prior work experience required) Internship or academic project experience in engineering or project coordination is an advantage.</p><h2>Technical Skills</h2><p>Basic knowledge of project management principles and methodologies. Familiarity with project planning tools such as Microsoft Project or Primavera. Understanding of engineering drawings, specifications, and technical documents. Basic knowledge of budgeting, cost control, risk management, and project reporting. Awareness of engineering standards, quality systems, and safety regulations. Proficiency in Microsoft Office applications.</p><h2>Soft Skills</h2><p>Strong analytical and problem-solving skills. Good communication and interpersonal abilities. Willingness to learn and develop professionally. Ability to manage multiple tasks and meet deadlines. Strong teamwork and coordination skills. Attention to detail and commitment to quality.</p><h2>Working Conditions</h2><p>Office and site-based work environments. May require travel to project sites and participation in inspections, meetings, and commissioning activities.</p><h2>Application Note</h2><p>The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age The closing date is 3rd August 2026.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: OT Network Engineer</p><p>Reports To: IT Manager / Network Manager</p><p>Number of Vacancies: 2 Positions</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>The Network Engineer is responsible for designing, implementing, maintaining, and optimizing the organization's network infrastructure to ensure secure, reliable, and efficient connectivity across all business operations.</p><p>Key Responsibilities</p><ul><li>Design, configure, implement, and maintain LAN, WAN, WLAN, and network security solutions.</li><li>Monitor network performance and ensure high availability and reliability of network services.</li><li>Troubleshoot and resolve network connectivity, hardware, and performance issues.</li><li>Install, configure, and maintain routers, switches, firewalls, and wireless access points.</li><li>Manage network security controls and support cybersecurity initiatives.</li><li>Perform network upgrades, patches, and preventive maintenance activities.</li><li>Support the implementation of new network infrastructure projects and system enhancements.</li><li>Monitor network capacity and recommend improvements to meet business requirements.</li><li>Maintain network documentation, diagrams, and technical procedures.</li><li>Coordinate with vendors, service providers, and internal teams to support operational needs.</li><li>Ensure compliance with company policies, industry standards, and best practices.</li></ul><p>Working Conditions</p><p>Office and field-based work environments. May require on-call support, troubleshooting activities, and assistance during planned maintenance or emergency situations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualifications</p><p>Bachelor s Degree in Network Engineering, Computer Engineering, Information Technology, Computer Science, Telecommunications Engineering, or a related field.</p><p>Experience</p><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic projects in networking are an advantage.</p><p>Technical Skills</p><ul><li>Strong knowledge of TCP/IP, DNS, DHCP, VPN, VLAN, and routing protocols.</li><li>Basic experience with Cisco, Juniper, Huawei, Aruba, or similar networking technologies.</li><li>Understanding of firewalls, network security, and access control systems.</li><li>Familiarity with network monitoring and management tools.</li><li>Basic knowledge of wireless networking technologies and security practices.</li><li>Ability to read and interpret network diagrams and technical documentation.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and problem-solving skills.</li><li>Effective communication and teamwork abilities.</li><li>Ability to manage multiple tasks and work under pressure.</li><li>Good organizational and documentation skills.</li><li>Attention to detail and commitment to service quality.</li></ul><p>Application Note : The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Title: Chemical Engineer</p><p>Reports To: Engineering Manager / Plant Manager</p><p>Job Details</p><p>Number of Vacancies: 1 Position</p><p>Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p>Job Purpose</p><p>The Chemical Engineer is responsible for designing, developing, monitoring, and optimizing chemical processes to ensure safe, efficient, and cost-effective production operations. The role focuses on improving process performance, maintaining product quality, and ensuring compliance with safety and environmental standards.</p><p>Key Responsibilities</p><ul><li>Design, evaluate, and optimize chemical processes and production systems.</li><li>Monitor plant operations and analyze process performance to identify improvement opportunities.</li><li>Conduct process calculations, simulations, and technical evaluations.</li><li>Support troubleshooting activities and implement corrective actions to resolve operational issues.</li><li>Ensure compliance with health, safety, environmental, and quality standards.</li><li>Prepare process documentation, technical reports, operating procedures, and engineering calculations.</li><li>Participate in plant commissioning, startup, shutdown, and process modification activities.</li><li>Coordinate with operations, maintenance, laboratory, and project teams to achieve production objectives.</li><li>Evaluate raw materials, equipment performance, and production efficiency.</li><li>Support process safety management initiatives and risk assessments.</li><li>Assist in implementing cost reduction, energy efficiency, and continuous improvement programs.</li><li>Provide technical support and training to operational personnel.</li></ul><p>Qualifications</p><ul><li>Bachelor s Degree in Chemical Engineering or a related engineering discipline.</li></ul><p>Experience</p><ul><li>Practical Experience: 0 (No prior work experience required)</li><li>Internship or academic projects in chemical engineering or industrial processes are an advantage.</li></ul><p>Technical Skills</p><ul><li>Basic knowledge of chemical engineering principles, process design, and optimization.</li><li>Familiarity with process calculations, mass and energy balances, and engineering analysis.</li><li>Understanding of process simulation tools such as Aspen HYSYS, Aspen Plus, or similar (advantage).</li><li>Awareness of process safety management and risk assessment concepts.</li><li>Basic knowledge of industrial equipment, instrumentation, and control systems.</li><li>Ability to read and interpret PFDs, P&amp;IDs, engineering drawings, and technical specifications.</li><li>Proficiency in Microsoft Office applications.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and problem-solving skills.</li><li>Good communication and teamwork abilities.</li><li>Willingness to learn and develop technical expertise.</li><li>Ability to manage multiple tasks and work under pressure.</li><li>Good organizational and documentation skills.</li><li>Attention to detail and commitment to safety and quality.</li></ul><p>Working Conditions</p><p>Office and plant-based work environments. May require site visits, plant inspections, troubleshooting activities, and support during shutdowns or emergency situations.</p><p>Application Note :</p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p>Job Purpose</p><p>The CMMS Engineer is responsible for managing, developing, and optimizing the Computerized Maintenance Management System (CMMS) to support effective maintenance planning, asset management, work order control, and equipment reliability across the organization.</p><p>Key Responsibilities</p><ul><li>Administer and maintain the CMMS platform to ensure accurate and efficient maintenance operations.</li><li>Create, update, and manage equipment master data, asset registers, and maintenance plans.</li><li>Generate and manage work orders, preventive maintenance schedules, and maintenance notifications.</li><li>Monitor maintenance activities and ensure timely completion of work orders.</li><li>Analyze maintenance data to identify trends, failures, and improvement opportunities.</li><li>Develop KPIs, dashboards, and performance reports related to maintenance activities.</li><li>Support maintenance planning and scheduling with operations and maintenance teams.</li><li>Ensure data accuracy, integrity, and consistency within the CMMS system.</li><li>Assist in system upgrades, configuration, testing, and implementation of improvements.</li><li>Provide training and technical support to CMMS users.</li><li>Coordinate with engineering, procurement, and maintenance teams for effective asset management.</li><li>Ensure compliance with company maintenance standards and asset management best practices.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications</strong></p><p>Bachelor s Degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, Computer Engineering, Information Technology, or related field.</p><p><strong>Experience</strong></p><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic exposure in maintenance systems or asset management is an advantage.</p><p><strong>Technical Skills</strong></p><ul><li>Basic knowledge of CMMS/EAM systems and maintenance workflows.</li><li>Understanding of preventive and corrective maintenance concepts.</li><li>Familiarity with data analysis and reporting tools.</li><li>Basic knowledge of asset management principles.</li><li>Awareness of industrial maintenance operations and equipment lifecycle.</li><li>Proficiency in Microsoft Excel and reporting tools.</li></ul><p><strong>Soft Skills</strong></p><ul><li>Strong willingness to learn and develop technical skills.</li><li>Good analytical and problem-solving abilities.</li><li>Strong attention to detail and data accuracy.</li><li>Good communication and teamwork skills.</li><li>Ability to manage tasks under supervision and meet deadlines.</li></ul><p><strong>Working Conditions</strong></p><p>Office-based with occasional site visits. May require support during maintenance shutdowns or system updates.</p><p><strong>Application Note</strong> :</p><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector.</p><p><strong>Job Title:</strong> Site Engineer</p><p><strong>Reports To:</strong> Project Manager / Construction Manager</p><p><strong>Job Details</strong></p><p>Number of Vacancies: 9</p><p>Position Salary Range: OMR PHONE_NUMBER per month</p><p>Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate)</p><p><strong>Job Purpose</strong></p><p>The Site Engineer is responsible for planning, coordinating, and executing engineering projects to ensure they are completed safely, on time, within budget, and in accordance with technical specifications and quality standards.</p><p><strong>Key Responsibilities</strong></p><ul><li>Assist in the planning, scheduling, and execution of engineering and technical projects.</li><li>Coordinate project activities with internal departments, contractors, consultants, and vendors.</li><li>Monitor project progress and ensure compliance with project schedules, budgets, and technical requirements.</li><li>Prepare project documentation, reports, specifications, drawings, and progress updates.</li><li>Review engineering designs, technical documents, and project deliverables.</li><li>Support procurement activities by reviewing technical specifications and evaluating vendor proposals.</li><li>Conduct site inspections and supervise project implementation activities.</li><li>Identify project risks and support the development of mitigation plans.</li><li>Ensure compliance with company policies, safety regulations, quality standards, and industry best practices.</li><li>Participate in project meetings and provide technical recommendations and solutions.</li><li>Assist with project testing, commissioning, handover, and closeout activities.</li><li>Maintain accurate project records and documentation throughout the project lifecycle.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Bachelor s Degree in Engineering (Civil, Mechanical, Electrical, Electronics, Telecommunications, Industrial, or related engineering discipline).</p><h2>Experience</h2><p>Practical Experience: 0 (No prior work experience required)</p><p>Internship or academic project experience in engineering or project coordination is an advantage.</p><h2>Technical Skills</h2><ul><li>Basic knowledge of project management principles and methodologies.</li><li>Familiarity with project planning tools such as Microsoft Project or Primavera.</li><li>Understanding of engineering drawings, specifications, and technical documents.</li><li>Basic knowledge of budgeting, cost control, risk management, and project reporting.</li><li>Awareness of engineering standards, quality systems, and safety regulations.</li><li>Proficiency in Microsoft Office applications.</li></ul><h2>Soft Skills</h2><ul><li>Strong analytical and problem-solving skills.</li><li>Good communication and interpersonal abilities.</li><li>Willingness to learn and develop professionally.</li><li>Ability to manage multiple tasks and meet deadlines.</li><li>Strong teamwork and coordination skills.</li><li>Attention to detail and commitment to quality.</li></ul><h2>Working Conditions</h2><p>Office and site-based work environments. May require travel to project sites and participation in inspections, meetings, and commissioning activities.</p><h2>Application Note</h2><ul><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li><li>The closing date is 3rd August 2026.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job description</b></p><p>Require Procurement Engineer for Group of Company. Candidates must require experience in Oils and Gas Procurement . Mechanical Degree is require for Procurement.</p><p>Role: Procurement / Purchase Engineer</p><p>Industry Type: Engineering &amp; Construction</p><p>Department: Procurement &amp; Supply Chain</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Procurement &amp; Purchase</p><p><b>Education</b></p><p>UG: B.Tech / B.E. in Any Specialization</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Candidates must require experience in Oils and Gas Procurement .</li><li>Mechanical Degree is require for Procurement.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under direct supervision, the Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p></section>