Packing & Packaging Technician Jobs in Oman

<p><p>The vehicle inspector inspects all vehicle repairs to ensure maintenance is performed to the highest standard. Responsible for daily quality control of all vehicle repairs performed by the work center. Complies with all applicable USAF Technical Order (TO) requirements. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal accountabilities</h4> <ul> <li>Inspects all vehicle repairs to ensure quality control is maintained to the highest level.</li> <li>Monitors quality of work performed by technicians and documents rejected vehicle repairs.</li> <li>Ensures safety practices and housekeeping guidelines are maintained to the highest standard.</li> <li>Conducts impromptu toolbox inspections for accountability and serviceability of assigned tools.</li> <li>Informs the chief mechanic of any deficiencies noted.</li> <li>Conducts limited technical inspections (LTI's) on assigned vehicles and ensures inspections are performed within prescribed guidelines, determining the causes of malfunctions, extent of repairs required, parts required and cost of repair.</li> <li>Assists with on-the-job training of new mechanics; provides knowledge, expertise and training to mechanics; provides task certification for mechanics in training and certifies periodic training.</li> <li>Assists mechanics with repairs or replacement of parts and assemblies, realignment and adjustment systems including manual and automatic transmissions, steering and braking systems, clutches, fluid flywheels and torque converters, axle hubs and bearings, fuel air and cooling systems, suspension and body work.</li> <li>Assists mechanics with troubleshooting and calibrating vehicle systems using diagrams, manuals, special tools, meters and test equipment.</li> <li>Checks completeness and accuracy of maintenance forms such as work orders, parts requests and maintenance sheets; records data such as hours worked, work performed, speedometer/hour meter readings, parts used.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable reporting any deficiencies.</li> <li>Assists with parts research by means of the commercial manuals, technical orders and parts manuals; checks all parts research to ensure accuracy and that only required repair parts are ordered.</li> <li>Inspects vehicles after preparation of USAF vehicle assets for air/land/sea movement.</li> <li>Ensures all hazardous materials are handled, stored and disposed of in accordance with Amentum Standard Operating Procedures (SOPs) and host nation rules.</li> <li>Ensures that only current up-to-date technical orders and commercial manuals are used when repairing vehicles or assisting in repairs.</li> <li>Uses quality database to enter and maintain all inspections required by SOP, WI's and all PWs publications.</li> <li>Reports any discrepancies in shop first aid kits, fire extinguishers and eyewash stations.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have excellent organizational skills and be able to understand, speak, read and write English at an intermediate level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>Will be required to operate material handling equipment and light to heavy military type vehicles.</li> <li>High school diploma or equivalent required.</li> <li>Four years' experience in vehicle repair required with three years on USAF equipment required.</li> <li>Two years' experience in a quality control capacity and the ability to mentor individuals on a corrective action plan.</li> <li>Will be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Proficiency in the use of personal computers with Windows operating system and Microsoft Office to include as a minimum, Excel and Word systems is preferred.</li> <li>Recognized national qualification in vehicle maintenance at a higher level preferred.</li> </ul></p><p></p>

<p> <strong>Job Contents:</strong> </p> <p>Design, procure, Maintain all types of SCADA equipment and Substation Control Systems. Ensuring proper preventive programs, compliance to Cyber Security requirements as outlined by APSR and ensure availability of SCADA systems for continuous operation of all grid stations and Control Centers.</p> <p> Carrying out regular maintenance of the Substation control System and RTU systems as defined in asset Class Strategy for SCADA Systems.</p> <p> Achieve SCADA System availability as defined in Asset Class Strategy for SCADA Systems.</p> <p> Providing Technical Support for new SCADA requirements.</p> <p> Coordination with various OEMs in technical issues related SCADA systems. </p> <p> Understanding and compliance to APSR Cyber Security requirements.</p> <p> Compliance and preparation of SOPs to meet business needs.</p> <p> Fully aware of Grid Code requirements and complying to it</p> <p> Responding to internal and external auditors.</p> <p> Ensure compliance to utility standards for Substation Automation best practices. </p> <p> Carrying out the commissioning of SCS/RTU systems.</p> <p> Verification of design documents for SCS systems from different vendors.</p> <p> Verification of functional description documents for SCS systems from different vendors.</p> <p> Coordinating with Projects, Consultants &amp; EPC s for new substations commissioning and ensure system delivered in line with tender requirements.</p> <p> Review of FAT and SAT Documents and attending the tests at OEM Factories.</p> <p> Sharing skills and experience with colleagues and supporting the development of others through coaching where possible.</p> <p> <strong>Job Qualifications and Experience:</strong> </p> <p>Bachelor s degree in electrical / Instrumentation / Electronics / computer Engineering . </p> <p> <strong>Professional Experience:</strong> </p> <p>Minimum of 3 to 6 years experience in SCADA, SCS system and RTU sys.</p> <p> </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>SLB Training for Employment Opportunity - Field Specialist (Production Systems)</strong></p><br><p>SLB is pleased to announce a training program leading to an employment opportunity for the position of <strong>Field Specialist</strong> within the <strong>Production Systems Division</strong>.</p><br><p>The training program will run for <strong>18 months</strong> and is designed to develop participants' technical knowledge and practical skills in the following disciplines:</p><br><ul><li>Mechanical</li><li>Electrical</li><li>Instrumentation</li><li>Process Operations</li></ul><p>During the training period, trainees will receive a <strong>monthly stipend of OMR 300</strong> to support accommodation and transportation expenses. Please note that <strong>SLB will not provide accommodation or transportation during the training period</strong>. However, <strong>all training-related costs will be fully covered by SLB</strong>.</p><br><p>Upon successful completion of the training program, participants will be offered a <strong>field-based role</strong> as a Field Specialist. The position will follow a <strong>6 weeks on / 3 weeks off rotational schedule</strong>.</p><br><p>This program offers an excellent opportunity for individuals seeking to build a rewarding career in the energy industry while gaining hands-on experience and world-class technical training with SLB.</p><br>Key Information<ul><li><strong>Position:</strong> Field Specialist (Production Systems)</li><li><strong>Training Duration:</strong> 18 months</li><li><strong>Monthly Stipend:</strong> OMR 300</li><li><strong>Accommodation &amp; Transportation:</strong> Not provided by SLB during training</li><li><strong>Training Costs:</strong> Fully covered by SLB</li><li><strong>Training Disciplines:</strong> Mechanical, Electrical, Instrumentation, and Process Operations</li><li><strong>Post-Training Work Schedule:</strong> 6 weeks on / 3 weeks off rotation</li><li><strong>Work Location:</strong> Field-based role</li></ul><br><p><strong>Minimum qualification:</strong></p><br><ul><li>Bachelor or Diploma in Mechanical, Electrical, Instrumentation &amp; process engineering</li><li>Must be a job seeker</li><li>Must be an Omani National</li></ul><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Architecte Banc de Test &amp; Matériel F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Sur un marché où l'innovation est la règle, Safran Electronics &amp; Defense s'impose comme le leader européen des systèmes de navigation inertielle et de guidage. Nos solutions équipent les secteurs spatial, aéronautique, terrestre et maritime, pour des applications civiles et militaires, et constituent un facteur clé de souveraineté pour les États.<br>Le pôle moyens de test ERA a pour mission de concevoir des bancs et logiciels innovants permettant de valider le bon fonctionnement et les performances de systèmes de navigation en constante évolution : adaptation à de nouveaux porteurs,prise en compte de besoins clients émergents,<br>intégration de technologies de pointe afin de maintenir notre avance concurrentielle.<br>Dans ce contexte, nous souhaitons recruter un-e Architecte Banc de Test &amp; Matériel, afin de sécuriser le développement, l'intégration et le support de moyens d'essais dédiés à des produits stratégiques.<br>Vos principales missions seront de :<br>- Concevoir et développer les moyens d'essais matériels (hardware) pour les produits du périmètre ERA.<br>- Réaliser la définition de l'architecture des bancs (interfaces électroniques, instrumentation, chaînes de mesure, interfaces avec les équipements à tester).<br>- Piloter la mise en définition des moyens d'essais dans l'outil de configuration MyPLM.<br>- Réaliser et développer des essais de pré‑production basés sur des séquences TestStand.<br>- Contribuer à l'analyse et à la résolution des problèmes techniques rencontrés lors de l'exploitation des moyens (investigations, corrections, évolutions).<br>- Assurer un support technique aux utilisateurs des bancs (production, essais développement, support client).</p><br><br><p>Maîtrise du développement sous TestStand et, idéalement, de l'écosystème NI (matériels PXI, etc.).<br>Expérience en intégration de moyens d'essais (configuration, déploiement, mise au point, maintenance).<br>Bonnes connaissances en électronique (analogique, numérique, capteurs, conditionnement de signaux, bus de communication type CAN, RS422, Ethernet…).<br>Compréhension des systèmes temps réel et des architectures de bancs d'essais (matériels de mesure, interfaces, synchronisation).<br>Capacité à rédiger des spécifications et une documentation technique claire et structurée.<br>Goût pour le travail en interface multimétiers (système, logiciel, électronique, production, support).<br>Rigueur, autonomie, sens de l'organisation et esprit de synthèse.<br>Qualités relationnelles et pédagogie pour présenter l'avancement et les choix techniques (revues de projet, comités techniques, échanges avec les métiers clients internes).<br>Possibles déplacements pour support ponctuel sur site de production (principalement Montluçon ou Poitiers ).</p><br><br><p>Diplôme d'Ingénieur (Bac+5) ou équivalent en électronique, automatique, informatique industrielle, instrumentation ou domaine proche.<br>Expérience significative dans le développement de moyens d'essais matériels automatisés en environnement industriel (aéronautique, spatial, défense ou similaire).L'utilisation de l'outil PSPICE serait un atout.<br>Maîtrise de l'environnement TestStand ; une expérience de VeriStand ou du développement de briques bas niveau (drivers, interfaces spécifiques) serait un plus.<br>Des connaissances des systèmes de navigation, de capteurs inertiels ou du domaine du guidage constituent un atout, mais peuvent être acquises en poste.<br>Bonnes capacités d'analyse, de synthèse et de communication.<br>Esprit d'équipe, curiosité technique et envie de s'investir sur des moyens d'essais stratégiques.</p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Medical Underwriting manager is responsible for managing Group and Retail Health underwriting across SME to large corporate accounts. The role holder will be responsible for technical risk evaluation, pricing, portfolio growth and retention, regulatory compliance, reinsurance coordination, and development of Omani talent within the department.</p><p><strong>Key Responsibilities</strong></p><p><strong>Medical Underwriting &amp; Portfolio Management</strong></p><ul><li>Underwrite new and renewal Group Medical business across SME to large corporate accounts (varying member sizes and premium volumes).</li><li>Carry out technical evaluation of Group Medical tenders and RFQs from Sales team and brokers - coverage, premium, and claims analysis.</li><li>Analyze medical records, claims history, and risk factors to accurately assess insurance eligibility and pricing.</li><li>Release competitive quotes and terms through prudent rating of insured lives, in line with reinsurance treaty guidelines.</li><li>Underwrite and manage Retail/Individual Health lines, developing suitable products for individual members.</li><li>Monitor and drive portfolio growth, persistency, and retention through improved service and pricing strategy.</li></ul><p><strong>Reinsurance &amp; Pricing</strong></p><ul><li>Coordinate with reinsurers to ensure underwriting terms align with treaty arrangements.</li><li>Conduct loss ratio analysis (network-wise, location-wise, channel-wise, broker-wise, TPA-wise) to guide pricing and business strategy.</li><li>Support forecasting, budgeting, and business planning for the medical portfolio.</li></ul><p><strong>Client &amp; Broker Relations</strong></p><ul><li>Submit and negotiate underwriting terms with clients and brokers.</li><li>Network with brokers and clients to resolve queries and clarify policy benefits.</li><li>Develop tools/modules for brokers and intermediaries (e.g., quotation management, SME premium calculators) to improve turnaround and service efficiency.</li></ul><p><strong>Compliance</strong></p><ul><li>Coordinate with Operations, TPAs, Claims, and Finance teams for smooth service delivery and issue resolution.</li><li>Prepare and present the medical underwriting report for submission to Financial Services Authority ensuring compliance with UHIP guidelines, Dhamani, and other applicable regulations.</li><li>Monitor emerging health trends and regulatory changes to keep underwriting criteria current and competitive.</li></ul><p><strong>Omanization &amp; Talent Development</strong></p><ul><li>Identify, coach, and mentor Omani employees within the underwriting team to build a sustainable local talent pipeline.</li><li>Design and implement a structured on-the-job training plan covering medical underwriting techniques, pricing, and regulatory requirements.</li><li>Set clear development milestones for Omani staff to progressively take on greater underwriting responsibility.</li><li>Support succession planning by preparing capable Omani nationals for future underwriting roles.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree (relevant field); MBA preferred.</li><li>Professional insurance qualification required (FIII, Diploma in Health Insurance, or equivalent).</li><li>Minimum 10 12 years of experience in medical/health underwriting, including Group and Retail lines.</li><li>Proven track record managing large corporate medical portfolios and driving portfolio growth/retention.</li><li>Experience in technical evaluation of tenders/RFQs, reinsurance-treaty-aligned rating, and loss ratio analysis.</li><li>Experience liaising with regulators on health insurance compliance matters (UHIP/Dhamani or equivalent local framework).</li><li>Prior experience managing broker and TPA relationships.</li><li>Strong technical underwriting and risk assessment capability specific to medical insurance.</li><li>Analytical skills that include loss ratio analysis, pricing, forecasting, and budgeting.</li><li>Strong stakeholder management (brokers, TPAs, clients, regulator).</li><li>Team leadership and coaching skills, with commitment to national talent development.</li><li>Process/technology orientation with experience developing tools or systems to improve underwriting efficiency.</li></ul><p></p></section>

<p><br></p> <p><b>Description</b></p> <p> Develop a comprehensive, long-term commissioning strategy specifically for the LDC's critical control systems (EMS, SCADA, and WAMS), ensuring alignment with OETC's broader infrastructure development plans.</p> <p> Provide direct strategic oversight across all testing and commissioning initiatives related to LDC system upgrades, integrations, and new system deployment.</p> <p> Mentor and develop the commissioning and testing team, setting KPIs to measure the effectiveness and efficiency of all control system activities.</p> <p> Serve as the primary technical liaison for commissioning and testing matters with leadership, other department heads (e.g., Engineering, Operations), and external vendors/system integrators.</p> <p> Represent OETC in industry forums and with APSR on issues related to the commissioning and compliance of control and monitoring systems.</p> <p> Resolve high-level conflicts or challenges that arise during complex LDC system projects to ensure timely and effective completion.</p> <p> Establish and implement a risk management framework for the control system commissioning program, including a departmental risk matrix to identify and mitigate potential technical, operational, and safety-related risks.</p> <p> Develop and enforce internal audit and quality assurance protocols to guarantee adherence to international best practices and regulatory requirements for EMS/SCADA/WAMS systems.</p> <p> Champion the adoption of new technologies and methodologies, such as automated testing, and advanced analytics, to modernize and future-proof the commissioning process for LDC systems.</p> <p> Create and maintain a knowledge base for all commissioning and testing data, ensuring valuable insights are captured and shared for future control system projects.</p> <p> Foster a culture of continuous learning and professional development within the team, building deep in-house expertise in modern control system technology.</p> <p>Minimum Qualifications (Educational Qualifications, Trainings or Certifications)</p> <p> Bachelor s degree in electrical engineering or equivalent qualification.</p> <p>Professional Experience</p> <p> Minimum of 7+ years experience in large, interconnected power system operations in relevant field.</p> <p> </p>

<p>We are looking for an experienced Indian Pharmacist to join a reputed private hospital in Salalah, Oman . The ideal candidate should have strong clinical and dispensing experience, a valid MOH Oman Licence, and be ready to join with an NOC. Position: Pharmacist Location: Salalah, Oman Nationality: Indian Experience: Minimum 4 years after Bachelor s degree Salary: OMR per month</p><p><strong>Desired Candidate Profile</strong></p><p>We are looking for an experienced Indian Pharmacist to join a reputed private hospital in Salalah, Oman . The ideal candidate should have strong clinical and dispensing experience, a valid MOH Oman Licence, and be ready to join with an NOC.</p>

<ul><li><p>Assess patients’ physical, cognitive, and functional abilities.</p></li><li><p>Develop and implement individualized therapy plans.</p></li><li><p>Train patients in daily living activities such as dressing, eating, and grooming.</p></li><li><p>Improve fine motor skills, coordination, and functional independence.</p></li><li><p>Recommend and train patients in using assistive devices.</p></li><li><p>Educate patients and caregivers on home care and safety.</p></li><li><p>Monitor progress and update treatment plans.</p></li><li><p>Maintain accurate documentation and reports.</p></li><li><p>Work closely with doctors and other healthcare professionals.</p></li><li><p>Guide junior therapists when required.</p></li><li><p><strong>Arabic Speaking is mandate</strong></p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Strong assessment and treatment skills</p></li><li><p>Good communication and patient care approach</p></li><li><p>Teamwork and coordination abilities</p></li><li><p>Compassionate and patient-focused attitude</p></li></ul>

<p>The Certified Technical Trainer is a full-time, on-site role based in Muscat, responsible for delivering technical training on Well Test services, systems, and solutions to internal staff. Day-to-day responsibilities include designing and updating training materials, conducting classroom and hands-on sessions, and evaluating participant performance to ensure competency in field operations and equipment usage. The trainer will collaborate with operations, technical support, and management to identify training needs, maintain certification standards, and support onboarding of new personnel. Additional tasks include maintaining training records, coordinating schedules, and providing ongoing coaching and refresher sessions to promote safe, effective, and compliant work practices.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>We are urgently hiring a Urologist for a reputed Private Hospital in Salalah, Oman. The selected candidate will be responsible for diagnosing and treating urological conditions, performing surgical and non-surgical procedures, managing inpatient and outpatient cases, and ensuring high standards of patient care.</p><p><strong>Desired Candidate Profile</strong></p><p>Unlock Free Mock Test Enter your email and select your exam category. Select Exam Category DHA OMSB SCFHS (Saudi) MOH QCHP (Qatar) Other Prometric Get Free Mock Test Join Our Telegram Channel! Get Free Daily MCQs , Mock Tests &amp; Prep Tips delivered to your phone! Your phone number stays private no one can see it in a Telegram channel. Join Now No Thanks</p>

<p>Provide high-quality medical care to patients with various health issues, including chronic conditions such as diabetes, hypertension, and heart disease. Conduct routine check-ups, diagnose illnesses, and develop treatment plans for patients. Collaborate with other healthcare professionals to ensure comprehensive patient care. Maintain accurate records of patient interactions and treatments. Stay up-to-date with latest medical research and advancements in general medicine.</p><p><strong>Desired Candidate Profile</strong></p><p>M.B.B.S. degree from an Indian institute of repute. 5-9 years of experience as a General Practitioner (GP) or equivalent role. Postgraduate qualification in Any Specialization is desirable but not mandatory. Strong knowledge of general medicine principles, practices, and protocols.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><ul><li><b>Identify and generate new business opportunities.</b></li><li><b>Develop and maintain relationships with corporate clients.</b></li><li><b>Promote and sell ERP, Accounting, HR, Inventory, POS, and other software solutions.</b></li><li><b>Conduct client meetings and software demonstrations.</b></li><li><b>Understand customer requirements and recommend suitable solutions.</b></li><li><b>Prepare quotations, proposals, and sales contracts.</b></li><li><b>Follow up with prospects until the sales process is completed.</b></li><li><b>Achieve monthly and annual sales targets.</b></li><li><b>Maintain accurate records in the CRM system.</b></li><li><b>Coordinate with the technical team during implementation.</b></li><li><b>Provide excellent after-sales support and maintain customer satisfaction.</b></li><li><b>Stay updated on market trends and competitor activities.</b></li><li><b>Prepare weekly and monthly sales reports.</b></li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><br></p><ol><li>Experience in ERP or Accounting Software sales is an advantage.</li><li>Strong communication, presentation, and negotiation skills.</li><li>Good command of English and Arabic.</li><li>Valid Omani driving license (preferred).</li></ol></div>

<p><h4>Role summary</h4> <p>A Coiled Tubing Field Specialist is a senior field-based role responsible for leading and executing complex coiled tubing and well intervention operations with a high level of technical expertise and operational authority. The role ensures safe, efficient, and reliable delivery of services while acting as the key technical leader on location in the absence of, or in support of, the Field Supervisor.</p> <p>The Field Specialist III is accountable for managing critical operational phases, troubleshooting complex wellsite challenges, and ensuring full compliance with HSE, well control, and client requirements.</p> <h4>Essential responsibilities</h4> <ul> <li>Lead and supervise complex coiled tubing operations at the wellsite</li> <li>Execute advanced interventions such as deep cleanouts, high-pressure milling, fishing operations, and stimulation support</li> <li>Oversee rig-up, pressure testing, operation, and rig-down of CTU and pressure control equipment</li> <li>Act as the primary technical authority on location during operations</li> <li>Monitor and interpret real-time operational data and make critical field decisions</li> <li>Troubleshoot complex surface and downhole equipment issues during live operations</li> <li>Ensure strict adherence to well control standards and HSE procedures</li> <li>Lead toolbox talks, risk assessments, and operational briefings</li> <li>Coordinate effectively with Field Supervisors, clients, and multi-service teams</li> <li>Mentor and train Field Specialists I/II and Field Operators</li> <li>Support job planning reviews and post-job reporting and evaluation</li> <li>Work with minimal supervision and may act as deputy or acting supervisor on location</li> <li>Hold significant technical authority during job execution</li> <li>Be accountable for operational integrity, safety, and efficiency in complex jobs</li> </ul> <h4>Essential requirements of the role (experience / skills / competencies)</h4> <p><strong>Years of experience:</strong> 8-12+ years</p> <p><strong>Field of experience:</strong> 5-8+ years in coiled tubing (CT)</p> <h4>Technical skills</h4> <ul> <li><strong>Advanced coiled tubing operations</strong><br> Full understanding of coiled tubing unit (CTU) operation and limitations<br> Execution of complex jobs: cleanouts, nitrogen lifting, acid stimulation, milling, and fishing operations<br> Knowledge of tubing fatigue management, depth control, and real-time operational adjustments </li> <li><strong>Pressure control & well control systems</strong><br> Strong expertise in BOP stacks, stripper assemblies, lubricators, and wellhead systems<br> Pressure testing procedures and barrier verification<br> Ability to recognize and respond to abnormal conditions (pressure anomalies, kicks, losses) </li> <li><strong>Downhole tools & job design support</strong><br> Experience with bottom hole assemblies (BHA), motors, jars, mills, and specialty fishing tools<br> Ability to interpret job programs and ensure correct tool selection and assembly<br> Troubleshooting downhole tool performance issues </li> <li><strong>Pumping & stimulation operations</strong><br> Operation and coordination of high-pressure pumping systems<br> Understanding of fluid systems, nitrogen applications, and stimulation treatments<br> Monitoring and adjusting pressure, rate, and volume during operations </li> <li><strong>Real-time data monitoring & interpretation</strong><br> Reading and interpreting surface parameters (pressure, depth, tension, pump rates)<br> Use of real-time data acquisition systems during operations<br> Making operational decisions based on live data trends </li> <li><strong>Equipment setup, maintenance & troubleshooting</strong><br> Advanced knowledge of CTU hydraulic, mechanical, and control systems<br> Ability to diagnose equipment failures and coordinate repairs<br> Ensuring readiness of all surface and downhole equipment before operations </li> <li><strong>Wellsite execution & leadership technical input</strong><br> Ability to translate job programs into safe field execution steps<br> Supporting supervisor in operational decision-making<br> Ensuring technical compliance with engineering design and client requirements </li> <li><strong>HSE & well control systems integration</strong><br> Strong application of well control principles in live operations<br> Integration of HSE requirements into technical execution (PTW, JSA, barrier management)<br> Emergency response technical readiness </li> </ul> <h4>Soft skills</h4> <ul> <li><strong>Leadership in the field</strong><br> Leads execution of coiled tubing operations on location when required<br> Guides operators and ensures tasks are performed correctly and safely<br> Sets the tone for discipline and operational control at the wellsite </li> <li><strong>Communication (strong and precise)</strong><br> Communicates clearly with Field Supervisor, client representatives, and crew<br> Gives accurate, real-time operational updates during critical jobs<br> Ensures instructions are understood and correctly executed </li> <li><strong>Decision-making under pressure</strong><br> Makes quick, sound decisions during live well operations<br> Balances safety, operational efficiency, and job objectives<br> Knows when to escalate issues versus taking corrective action </li> <li><strong>Situational awareness</strong><br> Continuously monitors wellsite conditions, equipment behavior, and crew activity<br> Identifies risks early and prevents escalation into incidents<br> Maintains full awareness during high-pressure operations </li> <li><strong>Problem-solving ability</strong><br> Resolves operational and equipment issues in real time<br> Applies practical field experience to troubleshooting complex situations<br> Supports engineering solutions with field insight </li> <li><strong>Mentoring & coaching</strong><br> Trains and develops Field Operators (I, II, III)<br> Shares technical knowledge and reinforces best practices<br> Helps build team competency and performance </li> <li><strong>Accountability & ownership</strong><br> Takes responsibility for assigned operations and outcomes<br> Ensures procedures and standards are strictly followed<br> Owns both success and issues in field execution </li> <li><strong>Team coordination & collaboration</strong><br> Works effectively with multi-service teams (wireline, pumping, nitrogen, client representatives)<br> Aligns activities to avoid conflicts and ensure smooth operations<br> Maintains strong working relationships in high-pressure environments </li> <li><strong>Adaptability & resilience</strong><br> Handles long shifts, remote locations, and changing job conditions<br> Adapts quickly to unexpected well behavior or operational changes </li> </ul> <h4>Tools or software (required / preferred)</h4> <p>At Field Specialist II level, the role requires both hands-on field tools knowledge and competency in digital systems used for job planning, execution, and reporting.</p> <h4>Education qualifications</h4> <p>Diploma or technical certificate or bachelor’s degree.</p> <h4>Industry background or experience (required / preferred)</h4> <p>With over 90 years' combined experience, NES Fircroft is proud to be the world's leading engineering staffing provider spanning the oil & gas, power & renewables, chemicals, construction & infrastructure, life sciences, mining, and manufacturing sectors worldwide. With more than 80 offices in 45 countries, we provide clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting everything from securing visas and work permits to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.</p></p><p></p>

<p>Please note that the deadline is based on Korean Standard Time Zone (KST, UTC+9)</p><p>INTRODUCTION TO GGGI The Global Green Growth Institute (GGGI) is a treaty-based international, inter-governmental organization dedicated to supporting and promoting strong, inclusive and sustainable economic growth in developing countries and emerging economies. To learn more please visit about GGGI web page.</p><p>In the Sultanate of Oman, under the oversight of the Regional Office (RO) for the Middle East and North Africa (MENA), the Regional Director (RD) has been leading a multi-disciplinary team of experts to develop a partnership with the Government through the leadership of the Environment Authority (EA) to develop the "Accelerating Resilience and Innovation for Sustainable Ecosystems management" (ARISE) Program . The ARISE Program is a USD 100 million initiative spanning six years, designed to deliver climate action, ecosystem restoration, and economic growth through Nature-based Solutions (NbS) integrated into the Bioeconomy and Sustainable Special Economic Zones (SSEZs) . The program ultimately targets the restoration of 30,000 hectares of land, an estimated 750,000 tCO2e/year in greenhouse gas emission reductions, and the creation of over 1,000 green jobs. The implementation of the ARISE Program is structured around two phases. Phase 1 will cover 2 years, and Phase 2 will be over 4 years. The funding has been approved for Phase 1.</p><p>PURPOSE The Water Resource Management Officer (Civil Engineer) applies specialized civil engineering concepts under close supervision to support the planning, technical design, and implementation of water resource and related infrastructure under Phase 1 of the project. S/he assists in conducting engineering assessments, preparing technical specifications, drawings, and cost estimates, and ensuring that all infrastructure complies with applicable standards, environmental requirements, and project work plans. Working closely with project teams and local counterparts, the Officer ensures that deliverables are produced in a timely manner to support broader project objectives within established scope, schedule, and budget.</p><p>ENGAGEMENT • Work closely with the Chief of Party (ARISE Program Lead), Regional Director, the Program Implementation Unit (PIU), the Regional PIU Support Team, and Stakeholders to support technical design of infrastructures and engineering assessments, complying with established GGGI policies, and Omani Government standards, while ensuring timely action and response. • Keep abreast on civil engineering changes in policies and regulations, and undertake timely strategic review of GGGI's country program ensuring continued relevance. • Maintain close communication with the PIU Team, MENA Regional Support Team, and Omani Authorities to share project requirements, coordinate field activities, and facilitate smooth technical collaboration. In consultation with the Regional PIU Support Team, advise the Program Director and PIU Team on general Engineering rules, standards of internal and external best practices, and supervision of construction works. • Provide timely and high-quality support to the ARISE Program Director and PIU Team for the effective end-to-end execution of the engineering assignments. • Perform other tasks assigned as per required instructions, in support of the implementation of initiatives assigned with the MENA Regional PIU Support team.</p><p>DELIVERY • Assist in conducting engineering assessments, site investigations, and feasibility studies for water resource infrastructure, ensuring technical, environmental, and economic viability. • Prepare and review technical designs, technical specifications, drawings, bills of quantities (BoQs), and cost estimates for project infrastructure. • Oversee the design and construction supervision of boreholes, water harvesting dams, storage facilities, distribution networks, irrigation systems, and associated civil works. • Design and supervise the installation of fog water harvesting (fog catchment) systems tailored to the climatic conditions of Dhofar Governorate. • Provide technical leadership for water conservation measures, including fencing, erosion control, and watershed protection structures. • Ensure all engineering works and documentation comply with national regulations, international engineering standards, environmental safeguards, and climate resilience requirements. • Coordinate with contractors, consultants, government entities, and local communities to facilitate effective implementation, quality assurance, and timely delivery of infrastructure works. • Monitor construction progress, conduct site inspections, review contractors' deliverables, and certify completed works in accordance with contractual requirements. • Identify engineering risks and propose practical, cost-effective solutions to address technical challenges during design and implementation. • Support procurement processes by preparing technical documentation, evaluating bids, and providing technical recommendations for contractor and consultant selection. • Contribute to project planning, budgeting, reporting, and knowledge sharing by documenting engineering progress, lessons learned, and best practices. • Strengthen the capacity of project staff and local stakeholders through technical guidance and on-the-job support in sustainable water resource infrastructure development. • Maintain a reputation for quality and reliability through the provision of services consistently and in keeping with the policies and principles of the organization</p><p>WORKING CONDITIONS Water Resource Management Officer is a G8NAT grade level in GGGI s national salary scale. GGGI provides 15% of base salary towards retirement plan/long-term savings, 27 days of annual leave, and private health insurance that covers dental and vision. The appointment is for an initial 24 months, renewable subject to performance and budget availability. Duty station: Salalah, Dhofar Governorate. GGGI is committed to providing a work environment that is sufficiently flexible to accommodate diverse life-cycle challenges and assist Staff members to achieve a better balance between work commitments and personal and family commitments, thus ensuring high performance, long-term productivity and well-being of Staff members. For more information on GGGI's terms and conditions (allowances, health care, education etc.) please familiarize yourself with GGGI's Rules and Regulations that can be found here: https://gggi.org/policy-documents/. Child protection GGGI is committed to child protection, irrespective of whether any specific area of work involves direct contact with children. GGGI s Child Protection Policy is written in accordance with the Convention on the Rights of the Child.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>A Minimum of a Bachelor's degree in Civil Engineering and/or Water Engineering. A Master's degree or a post-graduate qualification in a relevant field would be considered an advantage.</li><li>Preferably at least 6 years of relevant experience in engineering design and supervision of infrastructure constructions related to water infrastructures, building, dams, boreholes, etc.</li><li>Fluency in written and spoken English is a must; knowledge of another relevant language (especially Arabic) is an asset.</li><li>Good writing and editing skills.</li><li>High level of proficiency in MS Office applications.</li></ul><p>FUNCTIONAL</p><ul><li>Able to perform engineering assessments under time constraints.</li><li>Ability to manage time and prioritize effectively when the level of workload is high.</li><li>Able to work collegially under pressure with strict deadlines.</li><li>Able to handle multiple work assignments.</li><li>Self-initiative, motivated, and team-oriented, with capacity to work under pressure.</li><li>Strong ability to work with little supervision and/or virtually, while maintaining productivity.</li><li>Detail-oriented striving for quality and consistency demonstrating creativity, innovation, and a motivation drive in all outputs and communications.</li><li>Able to think strategically and in close collaboration with others. Able to learn quickly, demonstrate critical thinking, and make situation-appropriate decisions using sound judgment</li><li>Comfortable working both in a team and independently, pitch attitude a must.</li><li>Experience working in matrix teams with dual reporting.</li><li>Experience working in a high-paced environment.</li><li>Strong organizational skills that demonstrate a high level of accuracy and attention to detail.</li><li>Outstanding interpersonal and communication skills.</li><li>Knowledge of Engineering design software is a plus.</li></ul><p>CORPORATE</p><ul><li>Understand and actively support GGGI's mission, vision and values.</li><li>Promote an organizational culture of trust, transparency, respect and partnership.</li><li>Excel at problem solving, ask questions and seek support when needed, share easily information and knowledge with others both internally as externally.</li><li>Manage emotions and stress positively, build rapport and resolves conflict easily.</li><li>Strong ability to work independently and/or remotely, while maintaining productivity.</li></ul>

<p><h4>Starting date:</h4> <p>ASAP</p> <h4>Duration:</h4> <p>10 months onshore at the yard in Sohar, Oman, followed by 3–6 months offshore in Qatar</p> <h4>Principal responsibilities</h4> <p>To ensure safety of commissioning activities, with good coordination with other parties involved, and in respect with company regulations.<br> To manage and supervise pre-commissioning and commissioning activities in a safe and professional manner performed by a team of supervisors and technicians and ensure a smooth transfer of the facilities to the company operations team in compliance with the company standards within the priorities defined.<br> To be the technical referent for all matters related to his trade and provide solutions to technical issues.</p> <h4>HSE</h4> <p>Demonstrate HSE leadership by promoting HSE and quality policy and procedures to all personnel within the work environment in line with company HSE rules.<br> Conduct all activities in a safe and efficient manner in accordance with company policies, standards, and procedures.<br> Ensure implementation within commissioning team of project standing instructions related to LOTO and authorizations by relevant authority.<br> Ensure that all accident, incident, and near miss are reported in a factual and professional way and that evidence is available for further investigations.<br> Ensure all PTW/JSA requirements are met for any activity and prepare as required.<br> Participate in the client safety performance program and training.</p> <h4>Technical requirements</h4> <h4>Commissioning preparation:</h4> <p>Manage preparation of commissioning according to the responsibility matrix in respect with company methodology (OPERCOM) and all applicable company specifications - task identification, procedures, requirements for tools, vendors, equipment, manpower and ensure that these resources will be mobilized in time.<br> Ensure interface with the project team to integrate the commissioning schedule to the overall project schedule.<br> Ensure the preparation of system limit drawings.<br> Ensure the preparation of commissioning test procedures for approval and identify resource requirements for its performance.<br> Populate or supervise as required the completion database (ICAPS) in his trade.<br> Approve, follow, record and test all software modifications with the approval from the company.</p> <h4>Commissioning execution:</h4> <p>Ensure interfaces and requirements between commissioning team and contractor construction team in his trade.<br> Lead the sub-system completion walkdowns for his trade.<br> Lead and coordinate pre-commissioning and commissioning activities in his trade (loop testing, control panels energization and testing, functional tests, troubleshooting and support to other disciplines, assistance to start-up and operations teams, etc.).<br> Participate in and validate the site acceptance tests for his trade.<br> Supervise the vendor(s) activities related to his trade.<br> Consolidate the commissioning red-line marked-up drawings for his trade.<br> Produce, witness and track punch list items.</p> <h4>Reporting:</h4> <p>Ensure all documentation is filed and updated in the completion dossiers for his trade.<br> Report daily activities and progress in his trade to client’s representative.<br> Prepare technical reports and presentations as required.</p> <h4>Experience / qualifications</h4> <ul> <li>15+ years of experience onshore and/or offshore commissioning within the oil and gas industry.</li> <li>Experience with oil treatment and storage facilities.</li> <li>Very strong knowledge in his trade systems (LV, HV, power generator, transformers, switchboards, earthing, UPS and batteries, PMS/ECS, etc.) and technical documentation (PFD, P&ID, single line diagrams, etc.).</li> <li>Demonstrate a high level of awareness of safe working practices associated with the design, construction, pre-commissioning, commissioning, installation and start-up of oil and gas facilities in his trade.</li> <li>Demonstrate HSE leadership and proactive approach.</li> <li>Sound knowledge of various completions management systems.</li> <li>Ability to troubleshoot and to resolve issues in a timely and professional manner.</li> <li>Ability to develop cooperative working relationships and to promote teamwork.</li> <li>Ability to effectively communicate with relevant stakeholders relating to the project, including contractors and other project entities.</li> <li>Excellent communication and written skills (in English) and ability to work with different disciplines and cultures.</li> </ul></p><p></p>

<p><h4>Starting date:</h4> <p>ASAP</p> <h4>Duration:</h4> <p>10 months onshore at the yard in Sohar, Oman, followed by 3–6 months offshore in Qatar</p> <h4>Principal responsibilities</h4> <p>To ensure safety of commissioning activities, with good coordination with other parties involved, and in respect with company regulations.<br> To manage and supervise pre-commissioning and commissioning activities in a safe and professional manner performed by a team of supervisors and technicians and ensure a smooth transfer of the facilities to the company operations team in compliance with the company standards within the priorities defined.<br> To be the technical referent for all matters related to his trade and provide solutions to technical issues.</p> <h4>HSE</h4> <p>Demonstrate HSE leadership by promoting HSE and quality policy and procedures to all personnel within the work environment in line with company HSE rules.<br> Conduct all activities in a safe and efficient manner in accordance with company policies, standards, and procedures.<br> Ensure implementation within commissioning team of project standing instructions related to LOTO and authorizations by relevant authority.<br> Ensure that all accident, incident, and near miss are reported in a factual and professional way and that evidence is available for further investigations.<br> Ensure all PTW/JSA requirements are met for any activity and prepare as required.<br> Participate in the client safety performance program and training.</p> <h4>Technical requirements</h4> <h4>Commissioning preparation:</h4> <p>Manage preparation of commissioning according to the responsibility matrix in respect with company methodology (OPERCOM) and all applicable company specifications - task identification, procedures, requirements for tools, vendors, equipment, manpower and ensure that these resources will be mobilized in time.<br> Ensure interface with the project team to integrate the commissioning schedule to the overall project schedule.<br> Ensure the preparation of system limit drawings.<br> Ensure the preparation of commissioning test procedures for approval and identify resource requirements for its performance.<br> Populate or supervise as required the completion database (ICAPS) in his trade.<br> Approve, follow, record and test all software modifications with the approval from the company.</p> <h4>Commissioning execution:</h4> <p>Ensure interfaces and requirements between commissioning team and contractor construction team in his trade.<br> Lead the sub-system completion walkdowns for his trade.<br> Lead and coordinate pre-commissioning and commissioning activities in his trade (loop testing, control panels energization and testing, functional tests, troubleshooting and support to other disciplines, assistance to start-up and operations teams, etc.).<br> Participate in and validate the site acceptance tests for his trade.<br> Supervise the vendor(s) activities related to his trade.<br> Consolidate the commissioning red-line marked-up drawings for his trade.<br> Produce, witness and track punch list items.</p> <h4>Reporting:</h4> <p>Ensure all documentation is filed and updated in the completion dossiers for his trade.<br> Report daily activities and progress in his trade to client’s representative.<br> Prepare technical reports and presentations as required.</p> <h4>Experience / qualifications</h4> <ul> <li>15+ years of experience onshore and/or offshore commissioning within the oil and gas industry.</li> <li>Experience with oil treatment and storage facilities.</li> <li>Very strong knowledge in his trade systems (LV, HV, power generator, transformers, switchboards, earthing, UPS and batteries, PMS/ECS, etc.) and technical documentation (PFD, P&ID, single line diagrams, etc.).</li> <li>Demonstrate a high level of awareness of safe working practices associated with the design, construction, pre-commissioning, commissioning, installation and start-up of oil and gas facilities in his trade.</li> <li>Demonstrate HSE leadership and proactive approach.</li> <li>Sound knowledge of various completions management systems.</li> <li>Ability to troubleshoot and to resolve issues in a timely and professional manner.</li> <li>Ability to develop cooperative working relationships and to promote teamwork.</li> <li>Ability to effectively communicate with relevant stakeholders relating to the project, including contractors and other project entities.</li> <li>Excellent communication and written skills (in English) and ability to work with different disciplines and cultures.</li> </ul></p><p></p>

<p>Key Responsibilities: Provide safe and effective anesthesia for surgical and diagnostic procedures. Conduct pre-operative assessments and evaluate patients for anesthesia suitability. Administer and monitor general, regional, and local anesthesia as required. Monitor patients vital signs and manage intraoperative complications. Provide post-operative anesthesia care and pain management. Respond promptly to emergency and critical care situations. Maintain accurate medical records and anesthesia documentation. Collaborate with surgeons, nurses, and multidisciplinary medical teams. Follow hospital protocols, patient-safety standards, and infection-control procedures.</p><p><strong>Desired Candidate Profile</strong></p><h2>Requirements:</h2><ul><li>MBBS or equivalent medical degree.</li><li>Recognized postgraduate qualification in Anesthesia.</li><li>Valid professional medical license/eligibility for the relevant GCC country.</li><li>Relevant clinical experience as an Anesthesia Specialist.</li><li>Strong knowledge of anesthesia techniques, critical care, and emergency management.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>ingénieur système produit/équipement/mécatronique confirmé F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Safran Electronics &amp; Defense est un acteur de référence des technologies de pointe dans les domaines de la défense et de l'aéronautique. Au sein de notre entité, vous évoluerez dans un environnement riche en défis techniques, porté par une grande diversité de produits et de projets : systèmes d'instrumentation de vol, systèmes propulsifs, systèmes carburant et systèmes de guidage missile.<br>Parlons de votre future mission<br>Dans un contexte de forte croissance de nos activités, nous recherchons notre futur(e) Ingénieur(e) Système Mécatronique au sein de l'Unité d'Ingénierie Produit Guidage (UIPG).<br>Vous rejoignez une équipe en charge du développement d'un nouveau système de défense et intervenez comme référent technique d'un équipement à dominante mécanique/mécatronique. À ce titre, vous assurez le pilotage technique du produit depuis l'analyse du besoin jusqu'à sa validation.<br>Dans cet objectif, vos activités principales seront les suivantes :<br>Pilotage technique produit :<br>Vous êtes responsable de la cohérence technique et de la performance de votre produit :<br>- Définir les spécifications produit et décliner les exigences vers les sous-systèmes ;<br>- Évaluer les architectures candidates et contribuer aux choix d'architecture ;<br>- Réaliser les analyses de compromis (trade-offs) en coordination avec les architectes système ;<br>- Piloter les analyses de risques produit (DFMEA) ;<br>- Garantir la tenue des performances et la conformité aux exigences ;<br>- Construire la stratégie de validation et de vérification ;<br>- Contribuer à la démarche APQP de votre produit.<br>Coordination technique :<br>- Organiser et animer les revues de conception ;<br>- Assurer le support technique aux équipes d'ingénierie et aux partenaires en charge du développement des sous-systèmes ;<br>- Piloter les choix techniques et l'optimisation technico-économique des solutions (démarche CCXO) ;<br>- Analyser les besoins du client et contribuer à la définition ainsi qu'à la validation des spécifications.<br>Vous êtes responsable de la cohérence technique et de la performance de votre produit :<br>- Définir les spécifications produit et décliner les exigences vers les sous-systèmes ;<br>- Évaluer les architectures candidates et contribuer aux choix d'architecture ;<br>- Réaliser les analyses de compromis (trade-offs) en coordination avec les architectes système ;<br>- Piloter les analyses de risques produit ;<br>- Garantir la tenue des performances et la conformité aux exigences ;<br>- Construire la stratégie de validation et de vérification ;<br>Travail en équipe projet<br>Intégré(e) à une organisation matricielle, vous travaillez sous la responsabilité d'un responsable de lot et en interaction permanente avec les équipes produit, les bureaux d'études, les architectes système et les responsables projets.<br>Cette proximité avec les différents métiers vous permet d'acquérir une vision globale du système et de contribuer directement aux décisions techniques majeures du programme.</p><br><br><p>Pour en savoir plus sur nos activités : https://www.safran-electronics-defense.com/fr/video/631?shadowbox=1 </p><br><br><p>Profil recherché<br>Diplômé(e) d'une école d'ingénieur ou titulaire d'un Bac+5, vous justifiez d'une expérience significative dans le développement de systèmes à dominante mécanique ou mécatronique, idéalement acquise dans les secteurs aéronautique, spatial, défense ou industriel.<br>Compétences techniques<br>Solides connaissances en ingénierie système et architecture produit ;<br>Maîtrise du développement de systèmes complexes à dominante mécanique et/ou mécatronique ;<br>Expérience de la spécification, de la justification technique et de la validation de produits ;<br>Connaissance des démarches d'analyse de risques (DFMEA) et des processus de développement produit ;<br>Capacité à appréhender les problématiques techniques dans leur globalité et à réaliser des arbitrages techniques argumentés.<br>Qualités personnelles<br>Fort sens physique, pragmatisme et goût pour les sujets techniques complexes ;<br>Esprit d'analyse et de synthèse ;<br>Rigueur et sens de l'organisation ;<br>Force de proposition et capacité à identifier des solutions innovantes ;<br>Créativité et aptitude à remettre en question les modes de fonctionnement établis afin d'améliorer les performances du produit ou du projet.<br>Compétences relationnelles<br>Excellent relationnel et capacités de communication ;<br>Qualités d'écoute et de conviction ;<br>Aptitude à travailler en environnement transverse et à fédérer des équipes pluridisciplinaires ;<br>Capacité à interagir avec l'ensemble des métiers de l'entreprise ainsi qu'avec les partenaires, fournisseurs et clients.</p><br><br><br> </div>

<p>Supervise the execution of the safe &amp; efficient well drilling activities during assigned shift for the development, appraisal and exploration wells, and support the drilling engineers for any operational challenges/trainings and any other technical support.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><p><strong>HSE Roles &amp; Responsibilities:</strong></p><ul><li>Provide technical input during any HSE Emergency incident or Well control event arising from Well Engineering activities.</li><li>Responsible for the implementation of Well Delivery HSSE annual plan and ensure all units under Well Delivery operate 'at all time' in compliance with OQ HSSE requirements.</li><li>Assist in the close-out HSE actions resulting from Audit or incident investigations.</li><li>Actively contribute to all high potential HSE incidents investigations including participation in the investigation team while ensuring OQ investigation process is followed and all required reports completed on time.</li><li>When required, act as Well Delivery representative as per the Emergency Response Plan.</li><li>Ensure to Work safely and think proactively about personal safety and safety of others at work</li><li>Actively participate in, contribute to, and promote company occupational health, safety, security and environment culture.</li><li>Ensure work is carried out in accordance with the Company HSE and Security policies and procedures and meet company HSE goals and targets, and participate in HSE programs.</li></ul><p><strong>Operations Roles &amp; Responsibilities:</strong></p><ul><li>Execute the assigned work instructions for drilling and service in all aspects of daily drilling and completion activities including (but not limited to); drilling operations, casing operations, cementing operations, well integrity assurance, petrophysical data acquisition, geological data acquisition, fluid systems management, remedial operations and completion operations to ensure compliance with OQ programs. In doing so, the roles may include but are not limited to:</li><li>Select ion of tools for bottom hole assemblies to identify an optimum configuration that optimizes performance of the tools string and job objective;</li><li>Monitor operation of equipment controls to ensure pipe movement in and/or out of the well does not compromise well control</li><li>Strong understanding of down-hole conditions: such as</li><li>Problems associated with the drilling, due to the disturbances of earth stresses around the borehole, caused by the creation of the hole itself and by drilling mud/formation interaction).</li><li>Open/sable hole by maintaining a balance between earth stresses and pore pressure on one side and well bore mud pressure and chemical composition on the other side (pressure and temperature reduce constantly, and the solubility of elemental sulfur in natural gas decreases continuously)</li><li>Perform field calculations to cementation jobs.</li><li>Supervise all rig up and rig downs on location including unit transit between locations to ensure HSE is not compromised.</li><li>Execute the assigned Drilling task for the Unit(s) and ensure are tested, maintained and operated within their envelope and as per OQ/OEM requirements.</li><li>Provide a detailed post-well operational performance review report.</li><li>Liaise with Senior Drilling Engineer on requirements for operation optimization or remedial work and formulates revised work instructions in accordance with OQ change management requirements.</li></ul><p><strong>Key interactions</strong></p><p>Internal: Development/Exploration Departments / Central Operations and Facilities Departments / Supply Chain Management Department.</p><p>External: Contractors &amp; Service Providers</p><p><strong>Notable Working Conditions.</strong> Field Operational environment, computer screen use. (Shift)</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Petroleum engineering or related.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Arabic - Native (desirable)</li><li>+10 years of relevant experience</li><li>Well-rounded professional with strong background in petroleum engineering or G&amp;G, adaptable and motivated general management strategist who relishes challenges.</li><li><strong>Soft:</strong></li><li>Strong management &amp; leadership skills &amp; should be able to work collaboratively with all involved.</li><li>Excellent interpersonal skills and multi-cultural sensitivity.</li><li><strong>Technical:</strong></li><li>Computer literate with expertise in MS Office.</li><li>Hands on experience at managerial level in Oil &amp; Gas subsurface field</li><li>Experienced in resource control, contract management and general management.</li></ul>

<p>The Senior Software Engineer designs, develops, implements, and supports secure, scalable, and high-quality software solutions that enable the Bank's digital products and technology services. He/She leads the delivery of complex software initiatives, establishes engineering best practices, ensures operational excellence, and collaborates with cross-functional teams to deliver reliable, maintainable, and high-performing technology solutions.The Senior Software Engineer promotes engineering excellence by driving software quality, automation, technical innovation, secure development practices, and continuous improvement while mentoring engineers and contributing to the Bank's technology transformation initiatives. Key Accountabilities: Mentors and coaches software engineers through technical guidance, knowledge sharing, design reviews, and continuous professional development. Drives continuous improvement by identifying opportunities to optimize software architecture, development processes, automation, operational efficiency, and technology practices. Maintains technical documentation, development standards, operational procedures, and knowledge repositories to support sustainable application lifecycle management. Ensures compliance with the Bank's technology policies, information security standards, regulatory requirements, and software engineering governance frameworks. Performs any other responsibilities consistent with the scope of the role, as assigned by the line manager.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related discipline. Equivalent practical experience may be considered. Minimum of 6 years of professional software engineering experience, including experience designing, developing, and supporting production-grade applications and services. Demonstrated experience delivering scalable enterprise software solutions across the full software development lifecycle. Strong experience with one or more modern programming languages such as Python, Java, Go, TypeScript, Dart, or similar technologies. Experience developing and supporting RESTful APIs, microservices, distributed applications, and modern software architecture. Experience with relational databases, data modelling, API integration, application performance optimization, and cloud-native application development. Experience with CI/CD pipelines, DevOps practices, containerization technologies, Infrastructure as Code (IaC), and cloud platforms such as OCI, AWS, Azure, or Google Cloud. Knowledge of software engineering best practices including version control, automated testing, secure coding, code reviews, and release management. Experience developing or supporting Artificial Intelligence, machine learning, or intelligent automation solutions is preferred.</p>