Jobs For Faculty Of Engineering Graduates in Oman

<p>The Senior Panel Operator will be responsible for controlling and optimizing the DRI facility from the Central Control Room during commissioning, start-up, normal operation and shutdown. This is a critical control-room position requiring strong knowledge of DRI process behaviour, DCS operation, alarms, interlocks, process troubleshooting and emergency response. Key Responsibilities Operate and monitor the DRI plant through the PCS7 Distributed Control System (DCS). Participate in DCS/PLC loop checking, functional testing, interlock testing and Site Acceptance Testing. Monitor major process sections including the reactor/reduction shaft, PGH, process gas circuit, CO removal, HBI system and water-treatment facilities. Execute plant start-up, stabilization, normal-operation and shutdown sequences. Continuously monitor pressure, temperature, gas composition, flow, level and other critical process parameters. Maintain required DRI metallization, carbon content, production rate and product quality. Analyse trends and identify developing process abnormalities before they result in plant trips or production losses. Respond to alarms, trips and interlocks and take corrective action in accordance with approved operating procedures. Coordinate field actions with Senior Field Operators and Field Operators. Support emergency shutdown and plant recovery activities. Optimize consumption of natural gas, electricity, process gases, cooling water and other utilities. Maintain comprehensive control-room logs and shift reports. Support troubleshooting of recurring process and equipment problems. Coach Panel Operators and support their technical development. Work closely with Shift In-Charge, maintenance and instrumentation teams during breakdowns and plant interventions.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 4 years' relevant experience for degree holders or 8 years for diploma holders.</li><li>Minimum 4 years' experience as a Senior Panel Operator or equivalent control-room position.</li><li>Strong preference for candidates with Tenova HYL/Energiron DRI plant experience.</li><li>Strong knowledge of DRI plant start-up, shutdown and emergency operating procedures.</li><li>Hands-on experience with PCS7 or comparable modern DCS platforms.</li><li>Excellent understanding of process alarms, interlocks, trips, permissives and ESD philosophy.</li></ul>

<ul><li><p>Ensure compliance with the Company's HSE Policy and associated procedures.</p></li><li><p>Attend witness and hold points as specified in the approved Inspection and Test Plan (ITP).</p></li><li><p>Inspect and approve painting, coating, insulation, and fireproofing materials and related reports.</p></li><li><p>Review test packs and witness the required testing activities.</p></li><li><p>Attend daily progress meetings with the EPC Contractor and address quality-related issues.</p></li><li><p>Certify red mark-up drawings and final as-built drawings.</p></li><li><p>Provide daily feedback to the QA/QC Lead regarding quality issues.</p></li><li><p>Provide technical assistance for GRE, GRP, HDPE, and LLRTP projects.</p></li><li><p>Manage coating, insulation, fireproofing, and painting activities at both site and shop locations.</p></li><li><p>Implement QA/QC activities at the worksite, including subcontractor activities.</p></li><li><p>Review coating, painting, and testing deliverables.</p></li><li><p>Act as the focal point for quality control of GRE, GRP, HDPE, and LLRTP procurement, construction, installation, and testing activities.</p></li><li><p>Participate in kick-off and pre-inspection meetings, witness material testing, and bonder qualification activities.</p></li><li><p>Lead incident investigations related to GRE and HDPE systems.</p></li><li><p>Support the QA/QC Engineer in reviewing quality variances.</p></li></ul><br><p><strong>Duration: 6 Months, Extendable</strong></p><p><strong>Rotation Cycle: 6 weeks working & 2 weeks off</strong></p><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p>Bachelor's Degree or Diploma in Mechanical, Chemical, Metallurgical Engineering, or an equivalent discipline.</p></li><li><p>BGAS Grade 2 or NACE Level 2 (minimum) Certification in Painting Inspection.</p></li><li><p>Minimum of 8 years of experience as an Off-Plot/On-Plot Coating, Painting, Insulation, and Fireproofing Inspector, responsible for coating and painting inspection activities on medium to major Oil & Gas EPC projects.</p></li><li><p>Thorough knowledge of international standards related to painting, coating, insulation, fireproofing, associated materials, and testing requirements.</p></li><li><p>Proficient in computer applications, including email, word processing, and spreadsheet software for general business use.</p></li><li><p>Strong written and verbal communication skills, with the ability to communicate effectively with individuals and groups.</p></li><li><p>Minimum of 2 years of experience working as a GRE/GRP Supervisor.</p></li><li><p>Preferably completed a Company-approved vendor-specific training program in non-metallic construction, installation, commissioning, and QA/QC for GRE, HDPE, GRP, and LLRTP piping systems.</p></li><li><p>Thorough knowledge of international standards related to non-metallic piping and pipeline manufacturing and construction activities.</p></li></ul>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC System Lead to lead and coordinate system based precommissioning and commissioning activities on a large LNG facility. The role has full system ownership, providing leadership to system engineers and commissioning teams from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a hands-on, site based leadership role, suited to senior commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Act as system lead for assigned process and/or utility systems during PCC phases</li> <li>Lead system based planning, execution strategy, and sequencing in line with the commissioning philosophy</li> <li>Define system and subsystem boundaries, turnover scope, and priorities</li> <li>Supervise and coordinate PCC system engineers and field teams</li> <li>Ensure mechanical completion readiness and controlled handover to precommissioning</li> <li>Lead execution of precommissioning activities, including: <ul> <li>Flushing, blowing, drying, leak and pressure testing</li> <li>Instrument loop checks and functional testing</li> <li>Electrical testing and energisation readiness</li> </ul> </li> <li>Lead commissioning execution, live system testing, and startup support</li> <li>Manage punch lists, constraints, and system acceptance criteria</li> <li>Coordinate closely with construction, engineering, operations, HSE, and QA/QC</li> <li>Review and approve commissioning procedures, test packs, and system dossiers</li> <li>Report system progress, risks, and performance to the commissioning manager</li> <li>Enforce strict compliance with HSE rules, PTW, SIMOPS, and risk assessments</li> </ul> <h4>Mandatory requirements (strict)</h4> <p><strong>Education</strong></p> <ul> <li>Bachelor’s degree in engineering (mechanical, electrical, instrumentation, process, or equivalent)</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Minimum 10 years of oil & gas or LNG project experience</li> <li>Proven leadership role during precommissioning and commissioning phases</li> <li>Demonstrated experience as system lead / lead commissioning engineer / PCC lead</li> <li>Strong system based commissioning experience on large EPC projects</li> <li>Extensive site based LNG or gas processing facility exposure</li> <li>Candidates without direct leadership responsibility in PCC phases will not be considered.</li> </ul> <p><strong>Technical expertise</strong></p> <ul> <li>Deep understanding of: <ul> <li>PCC workflows and system handover processes</li> <li>LNG process and/or utility systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Strong ability to interpret: <ul> <li>P&IDs, cause & effect charts</li> <li>Electrical single line diagrams</li> <li>Instrument loop diagrams</li> </ul> </li> </ul> <p><strong>Leadership & professional skills</strong></p> <ul> <li>Proven ability to lead and coordinate multidisciplinary commissioning teams</li> <li>Strong interface management and decision making skills</li> <li>Hands-on problem solver with a proactive mindset</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup leadership experience</li> <li>Middle East project experience (preferred)</li> </ul></p><p></p>

<p><b>Job Content:</b></p> <p>The implementation and maintenance of all Protection and Metering equipment, ensuring that all policies, procedures and safety rules are adhered to</p> <p><b><br></b></p><p><b>Duties and Responsibilities</b></p> <p> Supervising the checking of the safety documents for all protection equipment</p> <p> Carry out daily safety checks</p> <p> Issuing Safety documents for related Protection activates with Zone</p> <p> Where possible to rectify any safety issues discovered in the checking Reporting all occurrences to the relevant departments across OETC</p> <p> Supervising and carrying out preventative measures to ensure a safe working environment</p> <p> Working within the framework of LOA (Limitation of Access), SFT (Sanction for Test) and PTW (Permit to Work) safety documents</p> <p> Supervising and ensuring that there is continuous availability of the system and that the system is working safely</p> <p> Timely restoration of all outages</p> <p> Preparation of the annual protection maintenance schedule</p> <p> Carry out all maintenance in line with the annual maintenance schedule</p> <p> The collection of data related to the function to be used for protection, devices and meter reference and store this information in the Central Log</p> <p> Analysis the Protection and Metering data and the reporting system operation performance</p> <p> Provide technical expertise to LDC, AMP and Strategic Planning and Project Departments.</p> <p> Fault analysis after tripping occurrences and rectifying to re energize</p> <p> Ensure protective relays function promptly at the time of fault conditions with proper coordination</p> <p> Checking the relays setting calculations, equipment design calculations and the fault level calculations</p> <p> Contribution towards the preparation of Protection and Metering budget, price control and tender documents</p> <p> Attending regular inter departmental meetings for troubleshooting, shut down and commissioning</p> <p> Ensuring 100% availability of spare devices, testing equipment s, relevant documents and testing reports</p> <p> Supporting and implementation of new protection and metering policy and procedures</p> <p> Coordination with the system studies unit in study of any expansion of the protection and metering system of the company</p> <p> Supporting Technicians to carry out all maintenance in accordance with the annual maintenance schedule and procedures</p> <p> Supporting the Technicians to operate safely</p> <p> Testing and commissioning of all Protection devices, Meters and New Grid stations</p> <p> Coordination for Engineering and Design of new projects</p> <p> Providing advice for the selection of new equipment for new projects</p> <p> Supervise the Subcontractors to ensure all safety rules</p> <p> Ensuring all Protection policies, procedures and work-related tasks are carried out correctly</p> <p> Sharing skills and experience with colleagues and supporting the development of others through coaching where possible</p> <p> Implementing and following department protection SOPs.</p> <p><b><br></b></p><p><b>Other Requirement:</b></p> <p> Pass the required protection system authorization assessment, e.g Level 1 &amp;2.</p> <p> Knowledge and Understanding of the Asset Management, HSE Management, Information Security Management, Quality Management, and Business Continuity Management Systems requirements according to ISO 55001, ISO 14001, ISO 45001, ISO 27001, ISO 9001, and ISO 22301 standards to carry out the assigned duties as per the roles and responsibilities matrix.</p> <p> <strong>Education:</strong> </p> <p>- Bachelor s degree in electrical Power Engineering/ Electrical Engineering</p> <p> <strong>Experience:</strong> </p> <p>- Minimum of 5 years in Protection environment</p> <p> </p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector. Job Title: Cybersecurity Reports To: IT Manager / Cybersecurity Manager Job Details Number of Vacancies: 3 Positions Salary Range: OMR PHONE_NUMBER per month Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate) Job Purpose The Cybersecurity Engineer is responsible for protecting the organization's information systems, networks, and digital assets from cyber threats. The role involves implementing security controls, monitoring security events, identifying vulnerabilities, and ensuring compliance with cybersecurity standards and best practices.</p><p>Key Responsibilities</p><ul><li>Monitor and analyze security events, alerts, and incidents across the organization's IT infrastructure.</li><li>Implement, configure, and maintain cybersecurity solutions such as firewalls, antivirus systems, endpoint protection, SIEM, and intrusion detection/prevention systems.</li><li>Conduct vulnerability assessments and security audits to identify and mitigate risks.</li><li>Investigate security incidents and coordinate response and recovery activities.</li><li>Develop and maintain cybersecurity policies, procedures, and standards.</li><li>Perform security monitoring and threat analysis to detect potential cyber threats.</li><li>Support the implementation of cybersecurity controls for new projects and systems.</li><li>Ensure compliance with applicable cybersecurity regulations, standards, and company policies.</li><li>Conduct security awareness training and provide guidance to employees on cybersecurity best practices.</li><li>Prepare security reports, risk assessments, and technical documentation.</li></ul><p>Qualifications</p><ul><li>Bachelor s Degree in Cybersecurity, Information Security, Computer Science, Information Technology, Computer Engineering, or a related field.</li></ul><p>Experience</p><ul><li>Practical Experience: 0 (No prior work experience required)</li><li>Internship or academic projects in cybersecurity are an advantage.</li></ul><p>Technical Skills</p><ul><li>Knowledge of cybersecurity frameworks and standards (ISO 27001, NIST, CIS Controls).</li><li>Basic understanding of firewalls, SIEM, IDS/IPS, endpoint security, and vulnerability assessment tools.</li><li>Understanding of network security, operating systems, and cloud security concepts.</li><li>Familiarity with incident response and security monitoring concepts.</li><li>Ability to analyze security logs and reports.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and teamwork abilities.</li><li>Ability to work under pressure and respond to security incidents.</li><li>Good organizational and documentation skills.</li><li>Strong attention to detail.</li></ul><p>Working Conditions</p><ul><li>Office-based environment with occasional on-site support activities.</li><li>May require availability during cybersecurity incidents, emergencies, or planned maintenance windows.</li></ul><p>Application Note : The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age The closing date is 3rd August 2026.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree in Cybersecurity, Information Security, Computer Science, Information Technology, Computer Engineering, or a related field.</li><li>Practical Experience: 0 (No prior work experience required)</li><li>Internship or academic projects in cybersecurity are an advantage.</li><li>Knowledge of cybersecurity frameworks and standards (ISO 27001, NIST, CIS Controls).</li><li>Basic understanding of firewalls, SIEM, IDS/IPS, endpoint security, and vulnerability assessment tools.</li><li>Understanding of network security, operating systems, and cloud security concepts.</li><li>Familiarity with incident response and security monitoring concepts.</li><li>Ability to analyze security logs and reports.</li><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and teamwork abilities.</li><li>Ability to work under pressure and respond to security incidents.</li><li>Good organizational and documentation skills.</li><li>Strong attention to detail.</li><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Principal Reservoir Engineering Grade Stream Upstream E&amp;P Function Operated Assets Subsurface - Development Location Oman - HO Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Team Lead Bisat WRM Direct reports Job purpose <br>Apply reservoir engineering &amp; Simulation to the subsurface development ABB Development, by (1) Conducting workflows pertaining to reserves maturation, well testing, field development planning update reservoir management strategies, (2) Monitor a range of activities, including well surveillance, fluid sampling, well testing and completion operations, (3) Work and support with multi-disciplinary team to apply reservoir engineering practices to reservoir management, well test design and analysis, reservoir simulation, reserves evaluation &amp; estimation, and (4) Directing lab workflows, managing lab data, working PVT data analysis (with internal and external PVT reports), developing EoS models &amp; BOT, developing final report, and presenting post project reviews with BUs. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justification s, and best international practices in consonance with national objectives. Main tasks and responsibilities <br><br>Provide guidance to support the Manager ABB Development in achieving desired performance objectives. <br>Guide Manager ABB Development &amp; Reservoir Team to aid in maintaining high technical standards <br>Guide on development plans / programs as required by the Manager ABB Development <br>Guide on fluid characterization studies for understanding fluid distribution in the field Guide on analysis and interpretation of RFT / MDT data as required <br>Participate in integrated field studies for maturing hydrocarbon resources <br>Evaluate well/reservoir performance and recommend production improvement opportunities <br>Guide on RE input to business planning, reserve evaluation and well proposals <br>Work with other disciplines on hydrocarbon maturation to further develop the asset <br>Evaluate well/reservoir performance and recommend production improvement opportunities <br>Provide RE input to business planning, reserve evaluation and well proposals <br>Participate in integrated field studies <br>Work with other disciplines on hydrocarbon maturation to further develop the asset <br>Coach and mentor early career professionals Participate in integrated field studies for maturing hydrocarbon resources <br><b>Key interactions <br></b>Internal: Subsurface Development &amp; Exploration / Well Delivery / Facilities / Operations / Supply Chain <br>External: Contractors, Technical Committees Notable Working Conditions. Field operations and o ffice environment, computer screen use. Education requirements Bachelor s degree in Petroleum Engineering or equivalent Language requirements Excellent knowledge of written, read, and spoken English (required) - Arabic - Native (desirable) Background and experience Competencies and skills <br>10+ years experience in Reservoir Engineering within Oil &amp; Gas industry <br>Proficiency in industry standard reservoir engineering packages such as Kappa Saphire, OFM, Eclipse <br>Experience with reservoir management <br>Experience with reservoir simulation <br>Good understanding of production operations and completion procedures <br>Experience in tight gas reservoirs is a plus <br>Experience in working with multi-disciplinary team role <br>Soft: <br><br>Leading multidisciplinary integrated teams and contribution to exploration opportunity risking and ranking. <br>Has participated or contributed to technical reviews, audits and preparation of Field Development Plans <br>Self-starter with the ability to multi task while maintaining priorities <br><br><br>Technical: <br><br>Computer literacy including MS Office <br>Project Management skills <br><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education requirements Bachelor s degree in Petroleum Engineering or equivalent Language requirements Excellent knowledge of written, read, and spoken English (required) - Arabic - Native (desirable) Background and experience Competencies and skills <br>10+ years experience in Reservoir Engineering within Oil &amp; Gas industry <br>Proficiency in industry standard reservoir engineering packages such as Kappa Saphire, OFM, Eclipse <br>Experience with reservoir management <br>Experience with reservoir simulation <br>Good understanding of production operations and completion procedures <br>Experience in tight gas reservoirs is a plus <br>Experience in working with multi-disciplinary team role <br>Soft: <br><br>Leading multidisciplinary integrated teams and contribution to exploration opportunity risking and ranking. <br>Has participated or contributed to technical reviews, audits and preparation of Field Development Plans <br>Self-starter with the ability to multi task while maintaining priorities <br><br><br>Technical: <br><br>Computer literacy including MS Office <br>Project Management skills <br><br></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provides strong technical engineering expertise pertaining Central Maintenance Planning &amp; Support Systems works, across RPI designated sites and all related operations, under TL Central Planning System &amp; Coordination scope s, as Technical Service provider of maintenance and execution of minor projects, modifications in accordance with the technical standards set by TSD to maintain the assets through; (1) Execute maintenance planning activities and shutdown to assets &amp; products, (2) Prepare reports and implementation plans / coordination for minor maintenance works in the designated areas, and (3) guide young engineers in Central Planning System &amp; Coordination matters; in order to ensure maximum availability of plant at all times, optimizing the cost, time &amp; resource utilization, minimizing the down time and meeting the operational targets that support the gross margin / profitability with a sufficient organizational capability for business continuity while identifying &amp; developing talent people to as feeder for OQ talent pipeline.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><p><strong>Role Scope</strong></p><p>Scope</p><p>RPI Assets Maintenance</p><p>Central Planning System &amp; Coordination</p><p>SAP maintenance model Owner</p><p>CMMS (SAP) PM master data and level of CMMS (SAP) usage</p><p>Safety and environmental compliance</p><p><strong>Accountabilities:</strong></p><p><strong>Planning &amp; Scheduling</strong></p><p>Provide input in development of maintenance strategies and plans, its administration, control, and availability of resources.</p><p>Maintenance focal point as SAP maintenance model Owner for assigned assets.</p><p>Arranges for planning/ preparations Shutdown related for jobs. Keep the packages ready in view of materials, resources &amp; other requirements to take-up the jobs in any opportunity.</p><p>Ensures that all temporary &amp; permanent solutions are being planned &amp; executed in coordination with execution teams for the Inspection generated work requests.</p><p><strong>Central Planning System &amp; Coordination</strong></p><p>Coordination with concerned discipline engineers to prepare detailed specifications, scope of work and ensure optimum use of resources.</p><p>Participation in identifying &amp; arranging maintenance works beyond in-house resources and need to be contracted out.</p><p>Leads daily maintenance planning meetings to discuss &amp; coordinate schedules, timing, and critical &amp; priority work, identifying manpower and equipment requirements.</p><p>Monitor &amp; guide planners to prepare maintenance plans, schedules with sufficient resources requirements for all maintenance activities.</p><p>Analyze the performance indicators and recommend solutions to catch-up for lagging areas.</p><p>Review job plans in the CMMS system giving job estimates showing sequence of steps, manpower requirements, man-hour requirements and any materials or equipment needed</p><p>Monitors and coordinate work executor s compliance to routine maintenance or SD planned.</p><p>Review &amp; adjusts planned maintenance schedules to maximize efficiency and discusses/resolves of actual time from schedule time.</p><p>Monitor the progress of the planned maintenance activities and update contractor s performance.</p><p>Conduct audit backlog, update estimates, and ensure maintenance orders are charged under correct WBS/ cost centres.</p><p>Proactively resolves issues during all phases of the schedule maintenance (including scope development &amp; start up to completion of shutdown/maintenance activities).</p><p>Involves in procurement process by preparation of detailed scope of works and liaising with contracts management &amp; execution teams.</p><p><strong>Stakeholder</strong></p><p>Collaborating with other teams and stakeholders, such as maintenance, engineering, procurement, and contractors.</p><p>Design the relevant contracts &amp; procurement of materials as per company strategy</p><p>Provide adequate contractor &amp; vendor management</p><p><strong>Regulatory &amp; Compliance</strong></p><p>Ensuring compliance with safety and environmental regulations, minimizing the risk of accidents and environmental incidents.</p><p>Ensuring that all relevant HSE aspects are incorporated in the scope work packs.</p><p>Implementation of lessons learned.</p><p>Ensure proper document &amp; data management to achieve an auditable process</p><p>Provide facilitation for external/ internal audits and follow-up of the maintenance function action items.</p><p><strong>Budget</strong></p><p>Developing maintenance budgets, ensuring that maintenance activities are cost-effective and align with the overall goals of the organization.</p><p>Analyse and monitor the progress &amp; budget status for capital projects.</p><p>Compilation of CAPEX &amp; OPEX budget, monitoring, and control.</p><p><strong>Reporting &amp; Continuous Improvements</strong></p><p>Leads in generating and preparation of reports and feedback regarding maintenance performance, compliance monitoring to implemented work processes.</p><p>Reviews the progress reports &amp; performance indicators and takes appropriate action and coordinates with concerned teams to catch-up for lagging areas.</p><p>Providing periodic reports regarding work status.</p><p>Maintenance backlog reports, analysis, and issuance of recommendation to the execution teams</p><p>Reporting the MOC under the maintenance function implementation</p><p><strong>Key interactions</strong></p><p>Internal: All Maintenance Managers &amp; Engineers, Planners, All Operations Managers, Procurement, Finance, People &amp; Culture, QHSE</p><p>External: Contractors, Vendors &amp; Suppliers</p><p>Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Qualification for this position is a bachelor s degree in mechanical / Electrical / Instrument Engineering or equivalent.</li><li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li><li>8+years of relevant experience</li><li>Relevant experience in similar role for Central Planning System (Oil &amp; Gas / Petrochemical or Refinery Plant experience preferred).</li><li>Engineering Planning System experience is a strong plus.</li><li>Good experience in Performance management for maintenance &amp; shutdown related jobs.</li><li>Knowledge of : Computerized Maintenance Management Systems (CMMS)</li><li>Expertise in SAP- PM, MM &amp; FM Module.</li><li>Primavera / Maximo / MS Project</li><li>Extensive experience in planning, scheduling of routine maintenance.</li><li>Sound judgment in technical matters with good skills in engineering field materials specifications and international standards.</li><li>Good experience in handling of Maintenance Contracts and shutdown related jobs.</li><li>Expertise for budgeting and cost control.</li><li>Good knowledge in Quality Assurance, Quality Control and HSE plans.</li><li>Familiar with techniques for ensuring data integrity with various integration of information/ reports</li><li>Knowledgeable in HSE plans related to maintenance activities.</li><li>Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals</li><li>Result oriented</li><li>Budget / Estimation</li><li>Good knowledge in Quality Assurance, Quality Control and HSE plans.</li><li>International Standards and applicable codes</li><li>Scheduling and Procurement process</li><li>Prior scheduling experience in a maintenance facility is a strong plus</li><li>Resources (internal and external) Cost Control</li><li>Knowledge in material specification, QA/QC, and international Codes &amp; standards</li><li>Ability to identify and resolve problems with appropriate resources</li><li>Must have excellent organizational skills and have a strong attention to detail.</li><li>Requires excellent communication skills, both verbal and written</li><li>Strong leadership skills as well as the ability to communicate across all levels.</li><li>Communication Skills (verbal / written)</li><li>SAP- PM Module. Primavera P6 / MSP, M/S Office.</li><li>Computerized Maintenance Management Systems (CMMS)</li><li>Computer problem solving skills,</li><li>Planning techniques, scheduling &amp; cost monitoring.</li><li>Knowledge in material specification, QA/QC, and international Codes &amp; standards.</li><li>Ability to schedule major shutdown projects</li><li>Ability to manage multiple priorities and perform multiple tasks simultaneously in a diversified and critical environment.</li><li>Data analysis and report writing skills</li><li>Ability to align the requirements of operations and maintenance</li><li>Able to build relationships within department staff and contractors with a focus on collaboration.</li></ul><p></p></section>

<p>The Pre-Sales Consultant partners with sales, delivery, and solution teams to shape customer-centric solutions, respond to RFPs/RFIs, and support deal closures through strong technical, functional, and commercial alignment. Key Responsibilities: - Work closely with sales teams to understand customer requirements and define solution approaches. - Lead or support RFP/RFI responses, including solution design, effort estimation, and proposal documentation. - Develop solution architectures, demos, PoCs, and presentations aligned with customer needs. - Collaborate with delivery, architecture, and product teams to ensure feasibility and scalability of proposed solutions. - Support pricing, costing, and commercial models in coordination with finance and leadership. - Participate in client workshops, technical discussions, and solution presentations. - Maintain reusable assets such as proposal templates, case studies, and solution accelerators. - Stay current with industry trends, technologies, and competitive offerings. Skills &amp; Experience: - Strong understanding of enterprise IT solutions, digital platforms, and system integration. - Experience in consulting, pre-sales, or solutioning roles within SI / ICT organizations. - Excellent communication, stakeholder management, and presentation skills. - Ability to translate business requirements into technical and functional solutions. Success Metrics (KPIs) - Number of RFP/RFI responses supported and submitted per quarter. - Bid win rate and contribution to revenue pipeline. - Quality and completeness of solution proposals (as measured by internal and client feedback). - Turnaround time for proposal and solution preparation. - Number of client workshops, demos, and PoCs supported. - Reuse and creation of proposal assets, accelerators, and case studies. - Collaboration effectiveness with sales and delivery teams.</p><p><strong>Desired Candidate Profile</strong></p><p>Years of Experience 12+ Years</p><p>Qualifications - Bachelor's degree in Engineering, Computer Science, Information Technology, or a related field. - MBA is an added advantage</p>

<p>POSITION SUMMARY Advise employees on general property information, in-house groups, policy changes, or other pertinent information. Answer questions about available services, general property information and amenities. Confirm guest first and last name and type of treatment scheduled prior to beginning treatment. Monitor and stick to time schedule throughout the day. Advise providers of last-minute changes or additions to schedule and resolve scheduling situations as needed. Promote and sell spa/salon services and retail products. Complete requisitions for additional products, supplies, or equipment. Inspect work areas and tools/equipment to ensure conformance to company standards. Notify Engineering of spa/salon maintenance and repair needs. Assist management in hiring, training, scheduling, and motivating and coaching employees; serve as a role model. Report accidents, injuries, and unsafe work conditions to manager. Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Welcome and acknowledge all guests according to company standards; anticipate and address guests service needs; assist individuals with disabilities; thank guests with genuine appreciation. Speak with others using clear and professional language; prepare and review written documents accurately and completely; answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others; support team to reach common goals. Ensure adherence to quality expectations and standards; develop and implement quality improvement or corrective action plans. Stand, sit, or walk for an extended period of time. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High school diploma or G.E.D. equivalent. Related Work Experience: At least 2 years of related work experience. Supervisory Experience: No supervisory experience. License or Certification: None</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Manage and oversee the company s procurement and tendering activities to ensure competitive sourcing, timely purchasing, compliant tender submissions, and effective cost control. Key responsibilities include: Manage procurement activities from purchase request through supplier selection, purchase order, and delivery. Lead the preparation and submission of technical and commercial tenders. Review tender documents and prepare compliance matrices, schedules, clarifications, and submission requirements. Coordinate tender inputs with Operations, Finance, HSE, HR, and other departments. Source, evaluate, negotiate with, and manage suppliers and subcontractors. Prepare quotation comparisons and commercial recommendations. Negotiate prices, payment terms, delivery schedules, and contractual conditions. Monitor purchase orders, delivery performance, and outstanding procurement requirements. Maintain approved supplier records and conduct supplier performance evaluations. Monitor tender portals and identify suitable business opportunities. Identify procurement risks, cost-saving opportunities, and alternative suppliers. Maintain complete procurement and tender records. Prepare regular procurement, tender, and supplier performance reports. Supervise and allocate work to the procurement and tendering team. Ensure compliance with company procedures, client requirements, and applicable regulations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in Supply Chain Management, Procurement, Business Administration, Engineering, or a related field. Minimum 5 years of relevant experience in procurement, tendering, supply chain, or contracts. Previous experience supervising or coordinating a team. Experience preparing technical and commercial tender submissions. Strong supplier sourcing, commercial evaluation, and negotiation skills. Good knowledge of procurement processes, purchase orders, supplier management, and cost control. Proficiency in Microsoft Office, particularly Excel. Experience using ERP or procurement-management systems is preferred. Strong written and verbal communication skills in English and Arabic. Oil and gas, environmental services, waste management, or industrial-sector experience is preferred.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description<br><p>Must have Skills : Pre-sales support, Business Solutioning (Expert), Solution-oriented (Strong), Customer orientation (Expert), Value proposition creation</p><br><p>Job Description:</p><br><p>Years of Experience 12+ Years The Pre-Sales Consultant partners with sales, delivery, and solution teams to shape customer-centric solutions, respond to RFPs/RFIs, and support deal closures through strong technical, functional, and commercial alignment. Key Responsibilities: - Work closely with sales teams to understand customer requirements and define solution approaches. - Lead or support RFP/RFI responses, including solution design, effort estimation, and proposal documentation. - Develop solution architectures, demos, PoCs, and presentations aligned with customer needs. - Collaborate with delivery, architecture, and product teams to ensure feasibility and scalability of proposed solutions. - Support pricing, costing, and commercial models in coordination with finance and leadership. - Participate in client workshops, technical discussions, and solution presentations. - Maintain reusable assets such as proposal templates, case studies, and solution accelerators. - Stay current with industry trends, technologies, and competitive offerings.</p><br><p>Skills &amp; Experience: - Strong understanding of enterprise IT solutions, digital platforms, and system integration. - Experience in consulting, pre-sales, or solutioning roles within SI / ICT organizations. - Excellent communication, stakeholder management, and presentation skills. - Ability to translate business requirements into technical and functional solutions.</p><br><p>Qualifications - Bachelor's degree in Engineering, Computer Science, Information Technology, or a related field. - MBA is an added advantage Success Metrics (KPIs) - Number of RFP/RFI responses supported and submitted per quarter. - Bid win rate and contribution to revenue pipeline. - Quality and completeness of solution proposals (as measured by internal and client feedback). - Turnaround time for proposal and solution preparation. - Number of client workshops, demos, and PoCs supported. - Reuse and creation of proposal assets, accelerators, and case studies. - Collaboration effectiveness with sales and delivery teams.</p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Oman </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Mindrift is looking for skilled Mobile App Developers (React Native, Flutter, Swift, or Kotlin) to join the Tendem project (https://tendem.<br>ai/) and build native and cross-platform mobile applications within our hybrid AI + human environment.<br> In this role, as an AI Pilot – that's how we refer to this position at Mindrift – you'll collaborate with Tendem Agents that handle repetitive tasks, while you provide mobile engineering expertise, platform-specific judgment, and quality control to ensure apps are stable, performant, and ready for real users on real devices.<br> This part-time remote opportunity is ideal for professionals with hands-on experience shipping iOS and/or Android apps, working with platform APIs, and handling the full mobile development lifecycle.<br> What We Do The Mindrift platform connects specialists with AI projects from major tech innovators.<br> Our mission is to unlock the potential of Generative AI by tapping into real-world expertise from across the globe.<br> About the Role This is a freelance role for a Tendem project.<br> As a Mobile App Developer, you'll design, build, and refine mobile applications across categories such as utilities, fitness/wellness, games, productivity, delivery, and content apps — for iOS, Android, or both, using native or cross-platform frameworks.<br> Key Responsibilities Build mobile applications using React Native, Flutter, Swift (iOS), or Kotlin (Android).<br> Implement responsive mobile UIs that follow platform conventions (iOS HIG, Material Design).<br> Integrate native device features (camera, push notifications, location, storage, biometrics).<br> Connect apps to backend APIs, handle offline state, caching, and synchronization.<br> Implement monetization features where required (in-app purchases, ads, subscriptions).<br> Evaluate AI-generated mobile code and refactor it for correctness, performance, battery use, and maintainability.<br> Debug platform-specific issues and prepare builds for distribution (TestFlight, Play Console).<br> Requirements and benefits At least 3 years of relevant experience in mobile app development (required).<br> Bachelor's or Master's Degree in Computer Science, Engineering, Information Technology, or related technical fields is a plus.<br> Candidates should have a strong foundation in mobile application development, platform-specific UI/UX patterns, and building stable, high-quality mobile experiences for iOS and Android.<br> We are looking for specialists who can confidently work with native or cross-platform frameworks, integrate device APIs and backend services, and refine AI-assisted output into production-ready mobile applications.<br> Strong attention to detail, performance awareness, and the ability to work independently are essential.<br> Hands-on experience with at least one of: React Native, Flutter, Swift/SwiftUI (iOS), or Kotlin/Jetpack Compose (Android).<br> Solid understanding of mobile UI patterns, navigation, state management, and platform guidelines.<br> Experience integrating REST APIs, handling async data, and managing local storage.<br> Familiarity with native device APIs (notifications, camera, location, storage, biometrics).<br> Experience with mobile build tools, code signing, and submission to App Store / Google Play.<br> Experience implementing in-app purchases, ads, or subscriptions is a plus.<br> Familiarity with backend services such as Firebase, Supabase, or similar is a plus.<br> Strong attention to detail and commitment to performance, stability, and platform polish.<br> Self-directed work ethic with the ability to ship complete mobile features independently.<br> Portfolio of shipped mobile apps (required, with App Store / Google Play links preferred).<br> English proficiency: Upper-intermediate (B2) or above (required) Project time expectations For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Compensation On this project, contributors can earn up to $60 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br> Why this freelance opportunity might be a great fit for you?<br> Work fully remote on your own schedule with just a laptop and stable internet connection.<br> Gain hands-on experience in a unique hybrid environment where human expertise and AI agents collaborate seamlessly — a distinctive skill set in a rapidly growing field.<br> Participate in performance-based bonus programs that reward high-quality work and consistent delivery.<br></span> </div>

<p>Karwa Motors is seeking a highly motivated and experienced Omani Sales &amp; Marketing Manager to lead and expand the company s commercial activities within Oman and regional markets. The candidate will be responsible for driving sales growth, managing key customer relationships, identifying new business opportunities, and developing strategic marketing initiatives related to buses, trucks, specialty vehicles, and related mobility solutions. The ideal candidate should possess strong knowledge of the commercial vehicle sector, particularly buses and trucks, along with proven experience in government, semi-government, and private sector business development.</p><p><strong>Key Responsibilities</strong></p><p><strong>Sales &amp; Business Development</strong></p><ul><li>Develop and implement strategic sales plans to achieve company sales targets and business objectives.</li><li>Identify and pursue new business opportunities in government, defense, transportation, logistics, oil &amp; gas, and private sectors.</li><li>Lead commercial negotiations, tender submissions, and contract discussions with clients and partners.</li><li>Build and maintain strong relationships with key stakeholders, clients, distributors, and suppliers.</li><li>Monitor market trends, competitor activities, and customer requirements to support strategic decision-making.</li><li>Coordinate closely with production, engineering, after-sales, and finance departments to ensure successful project execution.</li></ul><p><strong>Marketing &amp; Brand Management</strong></p><ul><li>Develop and execute marketing strategies to strengthen the company s market presence and brand positioning.</li><li>Manage participation in exhibitions, conferences, and industry events locally and internationally.</li><li>Prepare marketing materials, presentations, product profiles, and promotional campaigns.</li><li>Enhance digital marketing presence and corporate communication activities.</li><li>Conduct market research and customer satisfaction analysis.</li></ul><p><strong>Team Management</strong></p><ul><li>Lead and supervise the sales and marketing team.</li><li>Set KPIs, monitor performance, and ensure achievement of departmental objectives.</li><li>Provide coaching, mentoring, and development plans for team members.</li></ul><p><strong>Reporting &amp; Strategy</strong></p><ul><li>Prepare periodic sales forecasts, pipeline reports, and market intelligence reports.</li><li>Support management in developing long-term business expansion strategies.</li><li>Contribute to pricing strategies, partnership development, and commercial planning.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Omani Nationality is mandatory.</li><li>Bachelor s Degree in Business Administration, Marketing, Engineering, or related field.</li><li>Minimum 10 years of experience in sales and marketing, preferably within buses, trucks, commercial vehicles, automotive, or industrial sectors.</li><li>Strong understanding of the GCC commercial vehicle market is preferred.</li><li>Experience in handling government tenders and strategic accounts.</li><li>Proven track record in achieving sales targets and business growth.</li><li>Strong negotiation and communication skills.</li><li>Leadership and team management capabilities.</li><li>Strategic thinking and commercial awareness.</li><li>Excellent presentation and relationship management skills.</li><li>Ability to work under pressure and manage multiple projects.</li><li>Strong analytical and reporting skills.</li><li>Fluency in English and Arabic is preferred.</li><li>Experience in bus manufacturing, truck sales, special vehicles, or mobility solutions.</li><li>Familiarity with government procurement processes in Oman and GCC countries.</li><li>Existing network within transportation, logistics, defense, or infrastructure sectors.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description: EHS Senior EngineerRole<p><strong>EHS Senior Engineer</strong></p><br>Job Function<p><strong>Environment, Health &amp; Safety (EHS)</strong></p><br>Reporting To<p><strong>Project Manager</strong></p><br>Workplace Classification<p><strong>Site Based</strong></p><br>Role Summary<p>The EHS Senior Engineer is responsible for leading and implementing Environment, Health and Safety management systems across Power Transmission &amp; Distribution construction projects in Oman. The role ensures compliance with corporate EHS standards, client requirements, Omani regulations, and international best practices. The incumbent drives proactive risk management, promotes a strong safety culture, and supports the achievement of zero harm objectives through effective planning, monitoring, training, and continuous improvement initiatives.</p><br>Key Responsibilities<ul><li>Develop, implement, and monitor project-specific EHS plans, procedures, and risk control measures.</li><li>Ensure compliance with statutory requirements, client specifications, and company EHS management systems.</li><li>Conduct site inspections, audits, hazard identification, and risk assessments for transmission lines, substations, and associated construction activities.</li><li>Lead incident investigations, root cause analysis, and corrective action implementation.</li><li>Monitor contractor and subcontractor safety performance and ensure compliance with project EHS requirements.</li><li>Organize toolbox talks, safety campaigns, inductions, and awareness programs.</li><li>Review work permits, method statements, and job safety analyses before execution.</li><li>Track EHS performance indicators and prepare periodic reports for management and clients.</li><li>Coordinate emergency preparedness drills and ensure availability of emergency response resources.</li><li>Promote environmental protection measures including waste management, pollution prevention, and resource conservation.</li></ul>Key Interactions<p><strong>Internal:</strong> Project Manager, Construction Managers, Planning Engineers, QA/QC Team, HR, Procurement, and Site Supervisors to ensure safe project execution and compliance.</p><br><p><strong>External:</strong> Clients, Consultants, Government Authorities, Contractors, Subcontractors, and Auditors for regulatory compliance, inspections, reporting, and stakeholder coordination.</p><br>Knowledge &amp; Experience<p><strong>Minimum Qualifications:</strong>&nbsp;Diploma/Bachelor's Degree in Engineering or Science. NEBOSH IGC mandatory; additional HSE certifications preferred.</p><br><p><strong>Language Skills:</strong> Fluent in English; Arabic knowledge is advantageous.</p><br><p><strong>Experience:</strong> Minimum 8-12 years of EHS experience in construction projects, including at least 5 years in Power Transmission &amp; Distribution projects involving substations, overhead transmission lines, and electrical infrastructure.</p><br>Technical &amp; Behavioral Skills Required to Execute the Role<ul><li>Omani HSE regulations and international standards knowledge.</li><li>EHS auditing, incident investigation, and risk assessment expertise.</li><li>Construction safety management and permit-to-work systems.</li><li>Emergency response planning and crisis management.</li><li>Data analysis, reporting, and presentation skills.</li><li>Strong leadership, communication, influencing, and stakeholder management.</li><li>Problem-solving, decision-making, teamwork, and attention to detail.</li><li>Ability to work under pressure and manage multiple priorities effectively.</li></ul><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Sr. Specialist Business Applications Grade Stream People, Technology &amp; Culture Function IDS &amp; CI - Digital Delivery Location Oman Muscat Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Manager Digital Delivery Direct reports - Job purpose The Senior Solution Architect owns the architecture, design standards, delivery practices, and governance of the company s enterprise business applications. The role sets how solutions are designed, built, deployed, and integrated ensuring they are secure, scalable, well-governed, and reliably delivered into production. The Enterprise Document and Records Management System (EDRMS) is a core platform within the architect s portfolio. The role provides technical direction across the application landscape: it defines reference architectures and CI/CD and deployment standards, governs solution designs (internal and vendor), and ensures changes meet security, records, and data-governance requirements. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main Tasks and Responsibilities Solution Architecture &amp; Design Define and maintain reference architectures, solution designs, integration designs, and data-flow diagrams for the enterprise application portfolio, including EDRMS. Translate business requirements into secure, scalable, and maintainable technical solutions, selecting appropriate patterns and technologies. Provide hands-on design, prototyping, and proof-of-concept work to validate architecture decisions and de-risk delivery. Architecture Governance &amp; Standards Define, maintain, and enforce solution-design, coding, and integration standards and technical guardrails across applications. Operate design-authority / solution-review gates: review and approve internal and vendor technical designs against architecture, security, and data-governance principles. Maintain Architecture Decision Records (ADRs) and ensure changes follow change-management, access-control, audit, and IT-governance requirements; provide architecture input to audits and assurance reviews. Delivery Standards &amp; CI/CD Define the CI/CD strategy and standards (e.g. Azure DevOps, GitLab CI, GitHub Actions) covering source control, branching, automated build/test, code quality, and artifact management. Set expectations for automated testing and security scanning (SAST/DAST/dependency) within pipelines, and govern adherence across teams and vendors. Guide engineers and vendors in implementing pipelines to the agreed standard, and review delivery practices for quality and consistency. Deployment &amp; Release Strategy Own deployment architecture and environment strategy (development, test, staging, production), including environment promotion and configuration management. Define release governance deployment runbooks, rollback/back-out plans, and post-deployment verification and oversee controlled releases of significant changes. Coordinate change windows and cutovers with IT Operations, Infrastructure, Database, Cybersecurity, and vendor teams to protect availability and performance. EDRMS / ECM Platform Architecture Own the architecture and roadmap of the EDRMS platform (e.g. OpenText Documentum, D2, Content Server, or similar) as a core managed platform. Design document-management workflows, metadata models, taxonomy, classification, retention rules, access controls, and integration points, ensuring records compliance and data quality. Direct migration, indexing, metadata improvement, OCR, and search-optimisation activities, working with specialist engineers and vendors for deep configuration and build. Integration Architecture Design secure, resilient integrations between EDRMS / business applications and ERP (e.g. SAP), SharePoint/M365, databases, portals, and identity-management systems using APIs, web services, and connectors. Define standards for authentication, error handling, monitoring, and data quality across integrations. Technical Leadership, Support Oversight &amp; Vendor Management Act as technical authority and escalation point for complex incidents, performance problems, and integration issues, ensuring solutions are supportable and root causes are addressed without owning first-line incident resolution. Coordinate with vendors, review technical deliverables for quality and compliance, and follow up on support and enhancement activities. Provide technical guidance and knowledge transfer to internal teams and business users, and identify opportunities to automate manual processes and improve usability, efficiency, and reliability. Perform other related duties as assigned. Key interactions Internal: IDS &amp; CI function, IT Operations, Infrastructure, Database, and Cybersecurity functions, business application owners and users across all OQEP functions and streams. External: Software and platform vendors (EDRMS/ECM vendors, ERP vendors), system integrators, specialist technical consultants. Notable Working Conditions. Office environment, intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education Requirements Required: Bachelor's degree in Computer Science, Information Technology, Software Engineering, or related field. <em>Preferred: Postgraduate qualification or professional certifications such as TOGAF, Azure Solutions Architect, OpenText/Documentum certification, or equivalent; certifications in DevOps or CI/CD tooling (Azure DevOps, GitLab) are an advantage.</em> Language Excellent knowledge of written, read, and spoken English (required) Background and experience Competencies and skills 6+ years of relevant experience in solution architecture, enterprise applications, or software delivery within a medium to large organization. Demonstrated experience designing and governing enterprise application architectures, including integration and deployment architecture. Hands-on experience with EDRMS/ECM platforms (e.g. OpenText Documentum, D2, Content Server, or similar) is strongly preferred. Experience defining and governing CI/CD pipelines and DevOps practices (Azure DevOps, GitLab CI, GitHub Actions, or equivalent). Experience integrating business applications with ERP systems (e.g. SAP), SharePoint/M365, and identity management systems. Familiarity with architecture governance practices including Architecture Decision Records (ADRs) and design-authority processes. Experience working with vendors and managing technical delivery quality and compliance. Technical Competencies: Strong analytical and problem-solving skills. Excellent communication skills, able to translate technical concepts for business stakeholders. Ability to act as a technical authority and influence design decisions across teams and vendors. Attention to detail and a quality-driven mindset. Self-motivated with the ability to manage multiple initiatives concurrently. Collaborative approach to working with cross-functional and vendor teams. Cultural sensitivity in a multinational environment. Technical Competencies: Solution and enterprise architecture design (reference architectures, integration design, data-flow diagrams). Architecture governance and Architecture Decision Records (ADRs). CI/CD strategy and tooling (Azure DevOps, GitLab CI, GitHub Actions). Automated testing and security scanning (SAST/DAST/dependency scanning). Deployment architecture, environment strategy, and release governance. EDRMS/ECM platform architecture (OpenText Documentum, D2, Content Server, or similar). Document management workflows, metadata models, taxonomy, and records compliance. Integration architecture (APIs, web services, connectors) with ERP, SharePoint/M365, and identity management systems. IT governance, change management, and access control principles. Vendor management and technical delivery review.IT governance, change management, and access control principles. Vendor management and technical delivery review.</p><p></p></section>

<p>Act as technical authority for WTG erection activities. Supervise unloading, storage,</p><p>preservation, assembly and installation of turbine components. Coordinate crane</p><p>operations and heavy lifts for tower sections, nacelles, hubs and blades. Ensure</p><p>compliance with OEM procedures, quality requirements and HSE standards. Manage</p><p>subcontractors and interfaces with civil, electrical and commissioning teams. Support</p><p>mechanical completion, punch-list clearance and handover.</p><ol><li><p>Minimum Experience Requirements</p></li></ol><p>Minimum 8-10 years in industrial construction. Minimum 8 years dedicated to wind</p><p>turbine erection projects. Proven experience on wind farms above 300 MW.</p><p>Demonstrated involvement from construction through commissioning and COD.</p><p>Experience with international EPC contractors and OEM turbine suppliers.</p><ol><li><p>Preferred OEM Experience</p></li></ol><p>Candidates with hands-on experience in Vestas, Siemens Gamesa, GE Vernova,</p><p>Nordex, Enercon, Goldwind or Sany technologies shall be prioritized.</p><ol><li><p>Technical Competencies</p></li></ol><p>WTG erection methodology; tower installation; nacelle installation; blade mounting; bolt</p><p>tensioning; hydraulic torque equipment; alignment and leveling; lifting studies; heavy</p><p>crane operations; turbine preservation; mechanical inspections; quality dossiers; turbine</p><p>commissioning support; punch-list management; defect identification and rectification;</p><p>work packaging and construction sequencing.</p><ol><li><p>Construction and Project Management</p></li></ol><p>Management of subcontractors, daily progress monitoring, look-ahead planning,</p><p>resource allocation, productivity tracking, interface management, schedule recovery</p><p>actions, risk management and reporting to project management teams.</p><ol><li><p>HSE Requirements</p></li></ol><p>Strong leadership in lifting operations, work at height, rescue plans, permit to work</p><p>systems, lock-out tag-out procedures, risk assessments, toolbox talks and zero-harm</p><p>safety culture. Candidate must demonstrate a proactive safety leadership record.</p><ol><li><p>Qualifications</p></li></ol><p>Bachelor Degree in Mechanical Engineering or related discipline. English proficiency</p><p>B2/C1. Ability to work in remote locations and rotational assignments. Wind industry</p><p>certifications and GWO training are highly desirable.</p><ol><li><p>Geographic Experience</p></li></ol><p>Experience in international utility-scale wind projects is preferred. Middle East, Europe,</p><p>Latin America, Asia-Pacific and Africa wind farm experience will be considered</p><p>advantageous.</p><p><strong>Desired Candidate Profile</strong></p><p>This document defines the minimum and preferred recruitment requirements for hiring a Senior Wind Turbine Erection Engineer responsible for planning, supervision, erection, installation, quality control, mechanical completion and commissioning support of utility scale wind turbine generators (WTG). The role is intended for , Owners Engineers and Owner Representatives involved in onshore and offshore wind projects.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Electronic Technician (Cementing or Frac Equipment) is responsible for ensuring on-time delivery of equipment as per operational demands. The Electronic Technician improves maintenance related nonproductive time ratio of the Product Line's assets within the Maintenance Base (MB), and improves maintenance efficiency and people productivity.</p><br><ul><li>Maintain assigned equipment according to the pertinent maintenance program and compliant with the reliability centered maintenance strategy through adherence to the Computerized Maintenance Management System and standard work.</li><li>Adhere to transactional discipline within Technology Lifecycle Management (TLM) business systems to record materials and supplies, labor costs and equipment maintenance performance history such as movements, work orders, parts used and time to maintain.</li><li>Comply with TLM Product Line standards.</li><li>Participate in the continuous improvement culture, initiatives and improvement plans within the MB to improve asset utilization and cost of service delivery (CoSD).</li><li>Participate in continuous improvement efforts to improve asset turnaround time, which includes reducing downtime due to maintenance, parts and return authorization numbers, failures and work-in-process.</li><li>Support continuous improvement efforts to improve the efficiency and productivity of Maintenance Technicians.</li><li>Implement CoSD projects, such as the planned repair and reuse of parts.</li><li>Participate in failure investigations as assigned.</li><li>Comply with the TLM Competency Management System.</li><li><strong>Travel to field locations, including rigs and rigless sites, to provide onsite technical support, troubleshooting, and maintenance services when required.</strong><br></li></ul><p><strong>Minimum Qualifications</strong></p><br><ul><li>Diploma in Engineering or a related technical discipline.</li><li>Minimum <strong>5 years of experience</strong> in a similar role.</li><li>Minimum <strong>5 years of hands-on experience</strong> in the maintenance and troubleshooting of electronic equipment used in <strong>Cementing and Fracturing (Frac) operations</strong>.</li><li>Strong knowledge of electronic systems, diagnostics, repairs, and preventive maintenance for oilfield service equipment.</li><li>Ability to read and interpret technical manuals, electrical schematics, and equipment documentation.</li><li>Good problem-solving skills and ability to work in a field-based operational environment.</li></ul><p><strong>Preferred Qualifications</strong></p><br><ul><li>Experience with oilfield service companies and well intervention equipment.</li><li>Familiarity with HSE standards and industry best practices.</li><li>Good communication and teamwork skills.</li></ul><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<p><h4>Description</h4> <p>Apt Resources is seeking an Electrical ETP Officer to join our client's dairy farm operations in Abu Dhabi. In this role, you will be responsible for overseeing the electrical systems of the Effluent Treatment Plant (ETP) and ensuring that they operate efficiently and safely. Your expertise will play a critical role in maintaining compliance with environmental regulations and supporting sustainable farming practices.</p> <h4>Responsibilities</h4> <ul> <li>Oversee and maintain the electrical systems within the Effluent Treatment Plant (ETP).</li> <li>Diagnose and repair electrical faults in ETP machinery and equipment.</li> <li>Perform routine inspections and preventive maintenance on electrical installations.</li> <li>Ensure adherence to safety standards and environmental regulations.</li> <li>Keep abreast of industry best practices and advancements in ETP technology.</li> <li>Assist in developing and implementing electrical maintenance procedures and protocols.</li> <li>Respond to electrical emergencies and outages, coordinating with other departments as needed to resolve issues quickly and efficiently.</li> <li>Maintain accurate records of electrical maintenance activities, repairs, and system performance.</li> <li>Prepare reports on electrical system status, issues, and improvements for management review.</li> <li>Perform regular preventive maintenance on electrical systems to minimize downtime and prevent malfunctions.</li> <li>Diagnose and repair electrical faults and issues promptly to ensure continuous operation of the ETP.</li> <li>Monitor the performance of electrical systems to ensure optimal efficiency and compliance with operational standards.</li> <li>Implement improvements and upgrades to enhance system performance and energy efficiency.</li> <li>Conduct safety inspections and risk assessments to prevent electrical hazards and ensure a safe working environment.</li> </ul> <h4>Requirements</h4> <ul> <li>Diploma or degree in Electrical Engineering or a related field.</li> <li>At least 3 years of experience in electrical maintenance, ideally within a dairy farm, agricultural setting, or ETP environment.</li> <li>Strong knowledge of electrical systems, components, and machinery.</li> <li>Experience with PLCs (Programmable Logic Controllers) and SCADA (Supervisory Control and Data Acquisition) systems is a plus.</li> <li>Skilled in diagnosing and resolving electrical issues effectively.</li> <li>Exceptional attention to detail and problem-solving abilities.</li> <li>Good communication skills and the ability to work collaboratively within a team.</li> <li>Ability to work independently, manage multiple tasks, and handle responsibilities efficiently.</li> <li>Understanding of safety standards and environmental regulations relevant to electrical systems.</li> </ul> <h4>Benefits</h4> <p><strong>AED 4,500</strong> plus accommodation, food, toiletries, and other benefits as per UAE labor law.</p></p><p></p>

<p><h4>Description</h4> <p>Apt Resources is seeking an Electrical ETP Officer to join our client's dairy farm operations in Abu Dhabi. In this role, you will be responsible for overseeing the electrical systems of the Effluent Treatment Plant (ETP) and ensuring that they operate efficiently and safely. Your expertise will play a critical role in maintaining compliance with environmental regulations and supporting sustainable farming practices.</p> <h4>Responsibilities</h4> <ul> <li>Oversee and maintain the electrical systems within the Effluent Treatment Plant (ETP).</li> <li>Diagnose and repair electrical faults in ETP machinery and equipment.</li> <li>Perform routine inspections and preventive maintenance on electrical installations.</li> <li>Ensure adherence to safety standards and environmental regulations.</li> <li>Keep abreast of industry best practices and advancements in ETP technology.</li> <li>Assist in developing and implementing electrical maintenance procedures and protocols.</li> <li>Respond to electrical emergencies and outages, coordinating with other departments as needed to resolve issues quickly and efficiently.</li> <li>Maintain accurate records of electrical maintenance activities, repairs, and system performance.</li> <li>Prepare reports on electrical system status, issues, and improvements for management review.</li> <li>Perform regular preventive maintenance on electrical systems to minimize downtime and prevent malfunctions.</li> <li>Diagnose and repair electrical faults and issues promptly to ensure continuous operation of the ETP.</li> <li>Monitor the performance of electrical systems to ensure optimal efficiency and compliance with operational standards.</li> <li>Implement improvements and upgrades to enhance system performance and energy efficiency.</li> <li>Conduct safety inspections and risk assessments to prevent electrical hazards and ensure a safe working environment.</li> </ul> <h4>Requirements</h4> <ul> <li>Diploma or degree in Electrical Engineering or a related field.</li> <li>At least 3 years of experience in electrical maintenance, ideally within a dairy farm, agricultural setting, or ETP environment.</li> <li>Strong knowledge of electrical systems, components, and machinery.</li> <li>Experience with PLCs (Programmable Logic Controllers) and SCADA (Supervisory Control and Data Acquisition) systems is a plus.</li> <li>Skilled in diagnosing and resolving electrical issues effectively.</li> <li>Exceptional attention to detail and problem-solving abilities.</li> <li>Good communication skills and the ability to work collaboratively within a team.</li> <li>Ability to work independently, manage multiple tasks, and handle responsibilities efficiently.</li> <li>Understanding of safety standards and environmental regulations relevant to electrical systems.</li> </ul> <h4>Benefits</h4> <p><strong>AED 4,500</strong> plus accommodation, food, toiletries, and other benefits as per UAE labor law.</p></p><p></p>