Heavy equipment mechanical engineer Jobs

<p>Experience: 5 years required The chlorine Technician should make sure continuous chlorine dosing is in auto mode for all chlorination systems. He should prepare the preventive maintenance plan for all chlorination systems that the manufacturer recommends. He should make sure all dosing systems are working effectively and allow the suitable concentration per the PAW's standard. He is responsible for discovering the faulty dosing pumps for all dosing units and informing his Engineer. All booster pumps for chlorination units are Chlorine Technician responsibility, and he should make sure it works effectively as per the requirements. He is responsible for preparing the list of all buffers and chemicals required for the online analyzers operation/calibration and provide to his Engineer. He is responsible for following the calibration process with third-party analyzers of any type as per the manufacturer. He should operate the online analyzers as per the manufacturer recommendations. He should ensure the calibration of the portable meters to monitor the online analyzers reading and water quality parameters (pH, turbidity, conductivity, fluoride and chlorine meter, etc.) Samples must be delivered immediately to the laboratory for analysis or stored in compliance with laboratory instructions until the laboratory can receive them. He has to know to replace the chlorine gas cylinders. He has to be aware of HSE rules and committed to them completely.</p>

<p>Education &amp; Experience</p> <p> Recognized tertiary qualification in Petroleum, Gas, Drilling, Mechanical, Electrical, or related Engineering/Technical discipline.</p> <p> Minimum 20 years of progressive international land drilling experience.</p> <p> Minimum 10 years in Operations Manager, Operations Superintendent, or equivalent senior leadership roles.</p> <p> Extensive international and Eastern Hemisphere (EH) drilling experience, preferably across the Middle East, North Africa and other international operating environments.</p> <p> Proven experience managing multiple drilling rigs across different countries, clients, rig types, and operating environments.</p> <p> Strong experience with 1,000 3,000 HP land drilling rigs and different rig configurations, including SCR, VFD/AC, Cyberchair, and Top Drive systems.</p> <p> Experience with major international and national operators and both conventional and turnkey drilling projects.</p> <p> Proven experience in deep, horizontal, extended-reach, exploration, and development drilling operations.</p> <p> </p> <p>Operational &amp; Leadership Requirements</p> <p> Strong leadership experience managing drilling operations, maintenance, technical support, and multidisciplinary rig teams.</p> <p> Proven ability to lead Rig Managers, Toolpushers, Drillers, maintenance personnel, and operational support teams.</p> <p> Experience with rig start-up, commissioning, mobilization, rig moves, and operational readiness.</p> <p> Strong equipment and maintenance knowledge, including Top Drives, mud pumps, BOP systems, power systems, and rig-floor equipment.</p> <p> Experience improving rig performance, equipment reliability, safety culture, drilling efficiency, and NPT performance.</p> <p> Strong experience in workforce planning, competency development, training, and national workforce development.</p> <p> Strong client-management capability and experience acting as the operational and technical focal point for major clients.</p> <p> Experience managing rig budgets, OPEX, CAPEX, AFE requirements, and operational cost performance.</p> <p> Experience supporting technical tenders, contract requirements, and commercial discussions.</p> <p> Strong knowledge of HSE management, risk assessment, incident investigation, and emergency response.</p> <p> </p> <p>Training &amp; Certifications</p> <p>Required/preferred certifications include:</p> <p> IADC Well Control Supervisor Level / IWCF equivalent</p> <p> TAP Root Training / Root Cause Analysis</p> <p> Leadership / Management Training</p> <p> Stuck Pipe Prevention</p> <p> Rig Management</p> <p> Emergency Response</p> <p> </p> <p>Digital &amp; Technology Skills</p> <p>Strong working knowledge of:</p> <p> Microsoft Excel, Word, PowerPoint, Outlook, and Teams.</p> <p> Operational and drilling performance reporting systems.</p> <p> Maintenance and asset-management systems.</p> <p> Project-management tools.</p> <p> Data analysis, KPI dashboards, and Power BI or equivalent.</p> <p> AI tools for operational analysis, reporting, planning, and decision support.</p> <p> Digital drilling, rig automation, and equipment-monitoring technologies.</p> <p> Preferably Nabors Drilling Solutions (NDS), Canrig equipment, Top Drive systems, and related drilling technologies.</p> <p>Language</p> <p> Fluent professional English is mandatory, including the ability to conduct client meetings, technical discussions, presentations, and management reporting.</p>

<p><p>To execute marketing campaigns and events across various channels including digital, print, in-store, etc., in alignment with the brand year-long marketing calendar.</p> <p>The broad scope of the task requires heavy coordination with agencies, suppliers, vendors, and internal stakeholders.</p></p><p></p>

<p><p>To execute marketing campaigns and events across various channels including digital, print, in-store, etc., in alignment with the brand year-long marketing calendar.</p> <p>The broad scope of the task requires heavy coordination with agencies, suppliers, vendors, and internal stakeholders.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Logistics Planning &amp; Coordination<ul><li>Develop logistics plans for material movement, module transportation, and project cargo shipments.</li><li>Coordinate inbound and outbound logistics activities for fabrication projects.</li><li>Plan transportation routes, lifting arrangements, and shipment schedules for oversized and heavy-lift cargo.</li><li>Liaise with project teams, procurement, construction, and clients to ensure logistics requirements are met.</li></ul>Material Management<ul><li>Monitor receipt, storage, and dispatch of materials within the yard.</li><li>Coordinate with warehouse and inventory teams for material availability.</li><li>Ensure proper tracking and documentation of materials and project cargo.</li><li>Manage logistics records and inventory movement reports.</li></ul>Heavy Lift &amp; Load-Out Operations<ul><li>Support planning and execution of module load-out activities.</li><li>Coordinate transportation of fabricated modules from yard to jetty or project site.</li><li>Review lifting studies, transport studies, and load-out procedures.</li><li>Coordinate with marine contractors, transport agencies, and heavy-lift service providers.</li></ul>Shipping &amp; Customs Coordination<ul><li>Coordinate export/import documentation and customs clearance activities.</li><li>Liaise with freight forwarders, shipping lines, customs authorities, and port operators.</li><li>Ensure compliance with Oman customs regulations and project requirements.</li><li>Track shipments and provide status updates to stakeholders.</li></ul>Vendor &amp; Contractor Management<ul><li>Coordinate logistics contractors, transporters, and freight forwarding agents.</li><li>Monitor contractor performance, cost, and service quality.</li><li>Verify logistics invoices and support cost control measures.</li></ul>HSE &amp; Compliance<ul><li>Ensure compliance with L&amp;T HSE standards and company procedures.</li><li>Participate in risk assessments, toolbox talks, and logistics safety reviews.</li><li>Ensure all transportation and lifting activities are executed safely.</li><li>Support incident investigations and implementation of corrective actions.</li></ul>Reporting &amp; Documentation<ul><li>Prepare logistics progress reports and shipment status reports.</li><li>Maintain records of transportation schedules, delivery notes, and customs documentation.</li><li>Develop logistics dashboards and KPIs for management review.</li></ul><br> </div>

<p>Do you like working in collaborative teams and solving critical issues? Do you enjoy being part of a successful team? Join our Team! We are the leader in well construction and production. Our innovative physical and digital solutions improve efficiency, production and maximize reservoir value. Our Pressure Pumping team are expertise in Cementing, Coil Tubing &amp; Stimulation. Partner with the best The Technical support Engineer ensures Baker Hughes deliver flawless execution by providing Technical Support to the Service Delivery organization and Sales organization when needed in pre-planning, job execution, and post job analysis. As a Technical Support Engineer Cementing, you will be responsible for:</p><ul><li>Ensuring compliance with Manage the Job Cycle (MtJC) process</li><li>Being Subject Matter Expert for their area of support</li><li>Providing Support the field technically through different media ( online , phone calls and technical papers)</li><li>Providing 24/7 Support for Critical Operations in the field when needed</li><li>Sharing the knowledge across the organization by submitting best practices, case histories &amp; lessons learned to the knowledge management database</li><li>Following up on field failures that requires Technology involvement and ensure that the learning is shared across the field</li><li>Raising an alert across the Service Delivery organization whenever an unfamiliar technical issues arises on a job</li><li>Coaching other technical resources in their area of expertise</li><li>Communicating to Engineering and Technology organization on issues and lessons learned related to different technologies performing PL specific responsibilities</li><li>Handling special projects as required</li></ul><p>Fuel your passion To be successful in this role you will:</p><p>Work in a way that works for you We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. Working with us Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other. Working for you Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p><ul><li>Contemporary work-life balance policies and wellbeing activities</li><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li>Tailored financial programs</li><li>Additional elected or voluntary benefits'</li></ul><p><strong>Desired Candidate Profile</strong></p>Have a bachelor degree in Engineer (Masters degree is preferred) Have 15+ years of experience in cementing Have experience in CemFacts, cemvision, IsoVision for 10+ years Have experience in Foam cementing system for 10+ years Have a strong analytical and problem-solving skills. Have the ability to develop and mentor small technical teams. Have thorough understanding of P/L technology &amp; service delivery requirements. Be able to work in a 24/7 service environment, based on an agreed shift schedule. Have good communication skills both verbal and written in English.

<ul><li>Bachelor’s degree in<strong> Electronics Engineering</strong>, or a related field.</li><li>Open-minded, Innovative, Adaptable, and Hardworking willing to handle challenging tasks.</li><li>Work closely with IT, software, and other engineering teams to deliver comprehensive solutions.</li><li>Implementing secure network connections for IoT-based ELV systems.</li><li>Strong knowledge of <strong>networking</strong>, including <strong>designing Networks like LANs VLANs, Configure Switches and Routers</strong> and knowledge in QoS, and IP-based system integration. </li><li>Design and integrate<strong> audio, lighting, and LED systems</strong>, ensuring performance, compliance, and detailed technical documentation for projects. (<em>Preferred</em>)</li><li>Configure and optimize <strong>PAS (Public Address System)</strong>, oversee <strong>DJ system setup</strong>, and troubleshoot complex audio issues to ensure seamless event audio integration. (<em>Preferred</em>)</li><li>Design <strong>stage lighting with DMX, engineer LED screen setups</strong>, and ensure seamless compatibility and synchronization between lighting and visuals. (<em>Preferred</em>)</li><li>Strong knowledge of <strong>networking</strong>, including <strong>designing Networks like LANs VLANs, Configure Switches and Routers</strong> and knowledge in QoS, and IP-based system integration. </li><li>Manage project planning, implementation, and support; coordinate stakeholders; and deliver training and documentation for successful, on-time, and budget-compliant delivery.</li><li>Proven experience in <strong>audio-visual system design, implementation, and maintenance</strong>. - Preferred</li><li>Certifications in relevant areas (e.g., AVIXA CTS-D, Cisco(<strong>CCIE, CCNA, CCNP, CWNA)</strong>, Crestron)- Preferred</li></ul><p><strong>Desired Candidate Profile</strong></p><p>We are seeking an experienced and dynamic <strong>Audio-Visual/ Lighting/Network/ELV Engineer</strong> to design, implement, and maintain advanced <strong>AV and ELV systems</strong> for events, installations, and permanent setups and also knowledge in Networking. The ideal candidate will have a strong technical background in <strong>audio systems, stage lighting, LED screens, and networking</strong>, complemented by expertise in electrical and electronic engineering.</p>

<ul><li><p>To manage multi-discipline projects from the initiation till the close-out, within schedule and cost to an acceptable quality.</p></li><li><p>Shall have worked as a single-point responsible project engineer for a medium size oil/gas project or managing multiple smaller projects concurrently. </p></li><li><p>Shall have proven capabilities in managing and motivating all disciplines to deliver projects.</p></li><li><p>Shall demonstrate sound general management skills in all aspects of the work, be extremely well organised, methodical</p></li><li><p>Single point responsible for the efficient execution of assigned projects to deliver within schedule, cost and at an acceptable quality. </p></li><li><p>Develop scope of work handed over by the Company project engineer for each project to achieve the specified deliverables. </p></li><li><p>Develop cost and schedule control estimates and project key control documentation.</p></li><li><p>Responsible for management of all project reporting, interface definition, interface management, liaison with Company project engineers, maintain and control project variance logs, project audit reports, managing close-out of audit action items, early highlight and resolution of project issues.</p></li><li><p>Exercising control over manpower and material resources in order to execute the project within budget, schedule, quality and HSE requirements. </p><br></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Degree in a relevant engineering discipline -<strong><u> Preferable Mech.</u></strong></p><p>membership of internationally accepted applicable professional Institute. i.e PMP</p><p>Must be PC literate & Good communication skills</p><p>Hands on experience on planning software tools such as <strong><em>PRIMAVERA or equivalent.</em></strong></p><p>Experience in project management of sour facilities</p><p>Good interpersonal & communication skills and an extrovert.</p><p>Shall be able to form, smoothly interact and motivate a team within a matrix type organisation</p><p>Promote a planning execute - measure – feedback work loop method in project engineering.</p><p><br></p>

<ol><li><p>Undertake complete <strong>HVAC project engineering and implementation</strong>, including load calculations, equipment selection, material approvals, system layouts, installation/shop drawings, submittal drawings, and as-built drawings.</p></li><li><p>Develop and review <strong>HVAC designs, specifications, technical documentation, and drawings</strong> in accordance with project requirements and applicable industry standards.</p></li><li><p>Prepare and implement <strong>Sequence of Operations</strong> to meet project requirements and system performance objectives.</p></li><li><p>Validate <strong>engineered Bills of Materials (BOM) and project costs</strong>.</p></li><li><p>Provide engineering support and direction to <strong>Electrical, Controls, and other multidisciplinary teams</strong>.</p></li><li><p>Perform basic design and programming activities related to <strong>DDC, electronic comfort controls, BMS, and HVAC automation systems</strong>.</p></li><li><p>Provide technical support and troubleshooting for HVAC, refrigeration, electrical distribution, power quality, and related system issues arising at project/customer sites.</p></li><li><p>Ensure <strong>project execution and control</strong> comply with contract specifications, approved designs, engineering standards, quality requirements, and project schedules.</p></li><li><p>Conduct <strong>technical and techno-commercial evaluation of vendor quotations</strong>, support negotiations, and coordinate with mechanical contractors for timely material delivery and installation.</p></li><li><p>Coordinate with consultants, clients, vendors, contractors, and internal teams to ensure smooth project execution.</p></li><li><p>Develop <strong>installation manuals, training documents, QA/QC forms, and other project handover documentation</strong>.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Strong knowledge of <strong>DX and chilled-water HVAC systems</strong>.</p></li><li><p>Experience in HVAC design, engineering, installation, testing, commissioning, and project execution.</p></li><li><p>Proficiency in HVAC load calculations, equipment selection, drawings, BOQ/BOM, and technical submittals.</p></li><li><p>Knowledge of <strong>DDC/BMS and HVAC controls</strong>.</p></li><li><p>Strong vendor, contractor, consultant, and client coordination skills.</p></li><li><p>Good understanding of HVAC standards, specifications, and engineering practices.</p></li><li><p>Strong technical, analytical, problem-solving, communication, and project management skills.</p></li></ol>

<p>Under general supervision, performs Artificial Lift (AL) installations and pulls, routine checks, and troubleshooting. Provides instruction and technical support to customer personnel in the proper handling and operating procedures of ALs. Performs basic well production analysis and repair of AL equipment and tests, splices, and repairs cable. Prepares paperwork to include IFTA reports, billable and non-billable hours, and mileage. Trains and coaches new hires in basic principles. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Maintains mechanical performance of truck used in transportation to and from the field. Trains and mentors lower level technicians at the well site.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills : Field Service Tech , Workover or Completion , Workshop Experience : 3 + Years Education : High School/Secondary Employment Type : Full Time Salaried Employee</p>

<p><h4>Job Description</h4> <p>The power gen mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with Maintenance Action Sheets, Air Force Technical Orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of Bare Base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including Work Orders, USAF Supply and Amentum forms and update Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs temporary duty (TDY) in the area of operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense agencies contingency systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense agencies contingency systems preferred but not required.</li> </ul></p><p></p>

<p>The Power Gen Mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS). Principal Accountabilities Examines electrical equipment and systems for damages, corrosion and operation. Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes. Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems. Erects, repairs and services electrical power distribution systems and equipment. Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data. Tests required gauges and meters to assure accuracy and reliability. Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure. Analyzes malfunctions by inspection, observation of operation and use of test equipment. Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Interprets electrical drawings, schematics and blueprints. Conforms to USAF/Amentum safety, hazardous material and quality standards. Performs maintenance in accordance with Maintenance Action Sheets, Air Force Technical Orders and Amentum directives. Assists in the erection, construction and operation of Bare Base power generation and associated equipment to support real world exercises and contingencies. Performs servicing and/or maintenance of in-use assets as required. Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies. Prepares and completes documentation including Work Orders, USAF Supply and Amentum forms and update Maximo. Operates material handling equipment as required. Inspects Hazardous Materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required. Performs other tasks and duties as directed by Amentum/USAF tasking. May be required to assist in other departments when directed or requested to accomplish a specific task or project. Performs Temporary Duty (TDY) in the Area of Operations as required by USAF/Amentum tasking. Performs other duties as assigned. Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</p><p>Preferred Qualifications Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense Agencies Contingency Systems preferred. Maximo experience is preferred but not required. Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred but not required.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have organizational skills and be able to understand, speak, read and write English at a beginner level. Must possess a valid home country driver's license and ability to obtain host nation driver's license. High School diploma or equivalent required. Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience. May be exposed to extreme noise from operating equipment. Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed. Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment. Must be able to travel domestically and internationally.</p>

<p>Client Site & Gate Clearance: Interface with main contractors and EPC project managers to secure HSE site passes and permits-to-work (PTW) for trucks and drivers entering restricted infrastructure, refinery, and energy project areas. ROP Escort Coordination: Coordinate with the Royal Oman Police (ROP) Highway Patrol and Traffic Operations divisions to schedule and escort out-of-gauge (OOG) and heavy-haul convoys across national road corridors. Field Safety Supervision: Conduct pre-trip safety toolbox talks with expatriate heavy truck drivers, inspect cargo tie-downs (chains, binders, and lashing points), and verify PPE compliance. Incident & Hazard Reporting: Act as the first on-scene company representative for any transit road incidents, vehicle breakdowns, or safety non-conformances; submit incident reports in accordance with Omani labor regulations. Subcontractor & Route Survey Audits: Accompany survey teams to verify pinch-points, overhead clearances, and bridge load permits prior to mobilization.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Nationality: Omani National (Mandatory).</strong> Education: Diploma or Bachelor’s degree in Occupational Health & Safety, Logistics, Engineering, or a related discipline. Certifications: NEBOSH IGC or IOSH certification is preferred. Experience: 1–3 years of field HSE, transport operations, or escort coordination experience (experience on PDO, OQ, or major EPC road corridors is an advantage). Languages: Fluent in Arabic and working proficiency in English (Hindi or Urdu comprehension is a distinct practical plus when communicating with driver teams). License: Valid Royal Oman Police (ROP) Light Vehicle Driving License (Clean record, must be willing to drive escort/patrol vehicles).</p>

<p><h4>Position summary</h4> <p>Fix minor plumbing problems such as unclogging drains. Assemble pipe sections, tubing, and fittings. Fill pipes or plumbing fixtures with water or air to detect and locate leaks. Review blueprints, building codes, and specifications. Study building plans and inspect structures in order to plan installations. Measure, cut, thread, and bend pipe to required angles. Install and maintain pipe assemblies, fittings, valves, appliances, and fixtures. Perform miscellaneous minor repairs. Perform preventative maintenance on tools and equipment.</p> <p>Follow all company safety and security policies and procedures; report safety hazards, accidents, or injuries; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Develop and maintain positive working relationships with others. Speak with others using clear and professional language. Ensure adherence to quality expectations and standards.</p> <p>Move, lift, carry, push, pull, and place objects weighing less than or equal to 75 pounds without assistance. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Grasp, turn, and manipulate objects of varying size and weight. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move up and down a ladder. Stand, sit, or walk for an extended period of time. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualifications</h4> <ul> <li>Education: Technical, trade, or vocational school degree.</li> <li>Related work experience: At least 2 years related work experience.</li> <li>Supervisory experience: No supervisory experience.</li> </ul> <h4>Required qualifications</h4> <ul> <li>License or certification: Stationary engineer/boiler operator license, plumber certification.</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>Marriott Hotels strives to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p> <p>JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J. Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW</p><p></p>

<p>Under general supervision, performs Artificial Lift (AL) installations and pulls, routine checks, and troubleshooting. Provides instruction and technical support to customer personnel in the proper handling and operating procedures of ALs. Performs basic well production analysis and repair of AL equipment and tests, splices, and repairs cable. Prepares paperwork to include IFTA reports, billable and non-billable hours, and mileage. Trains and coaches new hires in basic principles. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Maintains mechanical performance of truck used in transportation to and from the field. Trains and mentors lower level technicians at the well site.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills are typically acquired through completion of high school or similar education and 3 to 4 years of experience in artificial lift operations. Performs basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required.</p>

<p>The Supervisor shall be responsible for on-site operations, ensuring the efficient, safe, and high-quality execution of field services. The role blends technical acumen across multiple trades particularly HVAC, plumbing, and carpentry with deep safety compliance and communication capabilities essential for leading diverse field crews.</p><p>Key Responsibilities:</p><ul><li>Coordinate and supervise field personnel performing, HVAC repairs, plumbing installations, and light construction.</li><li>Enforce stringent health and safety regulations in alignment with oil field standards and practices.</li><li>Organize job schedules, crew assignments, and equipment logistics to ensure timely and efficient field operations.</li><li>Promote a safety-first culture by conducting toolbox talks and leading incident response.</li><li>Diagnose and resolve technical issues in HVAC, plumbing systems, and minor construction works.</li><li>Serve as the permit holder under the ISSOW system (Integrated Safe System of Work), including Energy Isolation and Confined Space Entry responsibilities.</li><li>Maintain operational records, incident reports, equipment logs, and safety audits.</li><li>Communicate effectively with clients and multi-lingual teams to ensure work scope alignment and timely feedback.</li><li>Writes report documenting the problem and summary of actions taken along with the weekly, monthly reports.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree or high diploma in Mechanical, or Civil Engineering (or equivalent technical experience).</li><li>Minimum of 10 years experience, including 5+ years in a supervisory role.</li><li>Hands-on knowledge in HVAC systems, plumbing infrastructure, and basic carpentry techniques.</li><li>Strong command of English and Indian languages (e.g., Hindi, Malayalam, or Tamil, as applicable).</li><li>Holder of a valid Omani driver's license.</li><li>ISSOW permit holder certification with qualifications in Energy Isolation and Confined Space Entry.</li><li>Proficient in computer operations, field data entry tools, and basic MS Office applications.</li><li>Excellent leadership, communication, and decision-making skills.</li><li>Flexibility to work in remote locations and rotating shifts.</li></ul>

<p>Have a good understanding of the outlet's concept and food and beverage offerings and be able to verbally explain those to guests. Ensure that mise en place is completed shift to shift and during service in order to provide an efficient service. This includes cleaning tasks in front and back of house as well as polishing and assembling of equipment. Be able to operate the required steps on the POS - point of sales system in order to process food and beverage orders. Be able to deliver service by understanding the guest requirements. Carry out all tasks in a friendly, courteous and efficient manner. Properly up-sell services and products to our guests at all times, enhancing service and generating increased revenue. Be able to process MOHG Gift cards and other non-cash methods of payment. Perform any tasks relating to billing according to hotel standards and cashiering policies. Ensure all dishes are presented in compliance with hotel standards and food &amp; beverage specifications. Conserve all outlet equipment and utensils in good conditions by proper day to day handling of all applicable utensils and by carrying out required side duties as assigned. Assist in picking up all required stocks, including linen, beverage, dried goods and others and arrange them accordingly. Ensure product knowledge is up to date. Ensure that management and kitchen colleagues are informed of any special guest preferences or allergies. Support as required other outlets as assigned by the Restaurant/ Outlet Manager. Any other reasonable tasks as assigned by the Restaurant/ Outlet Manager. Communicate well with colleagues and superiors in order to avoid misunderstandings and other shortfalls caused by lack of communication. Be committed to being a team player; proactively cooperating and supporting colleagues in operational tasks. Listen to every guest and observe body language carefully in order to be able to understand guest needs and expectations and consistently delight and satisfy every guest. Have a natural, warm smile and a friendly and passionate approach towards guests. Create WOW moments to surprise and delight guests in the Restaurants through gestures and other actions. Ensure customer satisfaction from arrival to departure in accordance to the MOHG Legendary Quality Experiences (LQEs), the MOHG Pillars and the respective service standards of MOQA. Report guest's preference to superiors and act upon them whenever known.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for an experienced Quality Specialist who will be responsible for checking the quality of all incoming and outgoing material and products as well as the production procedures. You will be a firm advocate of quality in our business. The ideal candidate will possess a trained eye for detail and will be reliable and committed. In depth knowledge and comprehension of quality standards is essential. The goal is to ensure that our products are made of flawless materials with well-functioning equipment. That way our customers will enjoy high-quality service so that we can achieve long-term success.</p><p>Main Responsibilities</p><ul><li>Inspect procedures of the entire production cycle (from purchasing to customer delivery) to ensure they are efficient and comply with Food Safety &amp; Quality standards.</li><li>Approve incoming materials by confirming specifications, conducting a visual and measurement test, and rejecting and returning unacceptable materials.</li><li>Approve in-process production by confirming required specifications, conducting visual and measurement tests, and communicating the required adjustments to the concerned managers.</li><li>Maintain records of testing, information, and various metrics such as the number of defective products per day, kitchen inspection results, Hygiene &amp; Sanitation Inspection, etc.</li><li>Monitor the use of equipment to ensure it is safe and well-maintained and report any that doesn't meet the requirements.</li><li>Select output samples and check them using appropriate methods (measuring dimensions, testing functionality, comparing to specifications, etc.)</li><li>Conduct staff awareness training sessions on food Safety &amp; quality</li><li>Support the team to develop and implement a food safety &amp; quality management system.</li><li>Address customer complaints by conducting a thorough investigation and preparing a corrective action plan for non-conformities.</li><li>Prepare and submit reports to the line manager.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Must have had a minimum of 3 years of previous proven experience as a quality controller, or any relevant role in the catering or hotel industry.</p><p>Minimum Bachelor s Degree from a Food Background (Food Technology/Food Science/Microbiology/Bio-Chemistry, etc.)</p><p>Must be HACCP certified with a Level 03 as a minimum requirement.</p><p>Familiarity with quality testing machines and systems.</p><p>Proficiency in MS Office.</p><p>Strong verbal and written English language skills.</p><p>Possesses a confident, firm, and pleasant personality that can work well with a team.</p><p>Currently located in Oman</p><p>Familiar with Oman's rules and regulations as per the municipality/MOH.</p><p></p></section>

<p>Monitor and improve Rider Performance and Compliance. Lead Rider Recruitment for the allocated zones. Lead the team to complete Ad-hoc tasks and projects. Lead a Team of Rider Coordinators and/or Rider Captains. Document weekly updates on all logistics operations KPIs to line-manager along with actionable improvement items. Monitor, Control, and Optimize our internal Service Level KPIs on allocated zones and rider-level. Manage rider rooster with proper allocation of shifts/breaks/off-days etc. Supervises rider onboarding and training schedule with Rider Trainer and Rider Supervisor. Inventory management and usage compliance of Rider equipment. Oversee and decrease rider-level cancellations, and ensure an action plan has been developed and executed. Groom rider quality (behavior, appearance, professionalism, presentational etc). Setting up a performance improvement plan to improve performance of low performing riders. Monitor riders performance on individual level and responsible for coaching/warning riders. Audits fleet appearance &amp; rider behavior via on ground visits.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree 2+ years of experience in food/grocery tech industry is highly preferred Proficient in Google Suite tools like GDoc, GSheet, GSlides, GForms etc Strong communication skills, both written and verbal. Influencer and negotiation with good public speaking and presentation skills People management skills: Experience in managing a bigger group of people</p>

<p>We are looking for Network Engineer:</p><br><p>Bachelor’s in Networking/IT, 3–5 years’ networking experience. ITIL Foundation, CCNA and CCNP are required.</p><p><strong>Desired Candidate Profile</strong></p><p>.</p>