Heavy equipment mechanical engineer Jobs

<p>Perform preventive &amp; corrective maintenance of Instrumentation and E&amp;I systems . Calibrate, test and troubleshoot pressure, level, flow &amp; temperature instruments . Troubleshoot PLC, SCADA, VFDs, sensors and encoders . Work with Siemens PLC, WEG VFD, Profibus, Profinet &amp; Modbus . Maintain Fire &amp; Gas systems and CO, SO &amp; H detectors . Read P&amp;IDs, wiring diagrams and instrument datasheets . Maintain maintenance/calibration records and follow HSE &amp; PTW procedures .</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Instrumentation/E&amp;I: 57 years experience OR ITI Electrician: 7 9 years E&amp;I experience. Experience in Port, Plant, Oil &amp; Gas, Refinery, Petrochemical or Heavy Industry . Strong hands-on experience in instrumentation maintenance, calibration &amp; troubleshooting . Knowledge of PLC, SCADA, VFD and Fire &amp; Gas systems . Port/Bulk Handling experience preferred . Good communication and problem-solving skills. Interested candidates can apply with their updated CV.</p>

<p>Job title Process Engineer, Hydro-Processing Company OQ8 Function TSD Department Process Engineering &amp; Control Section Hydro-processing Location Oman (Duqm) Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Team Leader, Hydro-processing Direct reports - Job purpose<br><br>Provides engineering support for the development, implementation, and continuous improvement of process optimization-based activities in Hydro Processing (HPU, DHT,HCU) units, under TL Process Engineering Hydro Processing (HPU, DHT, HCU) scope s, acting as team player for assigned units; through:<br><br>(1) Identifies opportunities of optimization, as well as investigates and supports optimization proposals from others executing &amp; leading the corresponding engineering, maintenance and operational activities.<br>(2) Execute actions to ensure that Management process optimization Services meets Management strategy and performance goals; in order to ensure projects and service targets are achieved efficiently and to optimum standards<br><br>The position will act in accordance with the OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, HSE standards, Oman s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main tasks and responsibilities:<br>Unit Purpose Key Features HPU (Hydro-processing Unit) General term for units that perform hydro-treating or hydrocracking. Utilizes hydrogen to treat petroleum fractions.<br>Removes contaminants like sulfur, nitrogen, and metals.<br>Enhances product quality and ensures compliance with environmental standards.<br>DHT (Diesel Hydrotreater) Specifically designed to treat diesel fractions to produce ultra-low sulfur diesel (ULSD). Removes sulfur and nitrogen compounds from diesel feedstock.<n>Operates at high temperatures and pressures with hydrogen.<br>Catalysts are used to facilitate the reaction, improving the cetane number and stability of diesel.<br>HCU (Hydrocracking Unit) Breaks down heavy hydrocarbons into lighter, more valuable products like gasoline, diesel, and jet fuel Uses hydrogen under high pressure and temperature.<br>Employs dual-function catalysts (acidic function for cracking and metallic function for hydrogenation).<br>Converts heavy feedstock into lighter, cleaner products.<br>Enhances the yield of high-value products.<br>Accountabilities:<br>Data Analysis and Optimization<br>Provides robust support while analyses plant s data using PI and LIMS and provides remedial solutions for deviations.<br>Identifies optimization opportunities.<br>Identifies debottlenecking opportunities and improves unit efficiency.<br>Provides technical recommendation in resolving complex process issues.<br>Design and Process Optimization<br>Coordinates and reviews complex design work.<br>Develops Heat and Material Balances, designs minor modifications.<br>Prepares preliminary documents for tender submissions.<br>Leads engineering reviews for plant modifications and improvement projects.<br>Develops and validates process simulation and optimization studies.<br>Provides technical guidance to multidisciplinary teams.<br>Equipment Monitoring and Troubleshooting<br>Monitors equipment like reactors, drums, compressors.<br>Performs RCA and proposes corrective actions.<br>Safety and Compliance<br>Develops technical procedures.<br>Leads HAZOP, PSSR, and process safety reviews.<br>Provides technical leadership for MOC and risk assessment activities.<br>Promotes process safety best practices across the organization.<br>Process Engineering Support<br>Provides support for the development of Key Documents.<br>Provides technical assistance to other sections.<br>Develops advanced simulation models and digital performance tools.<br>Mentors and develops junior engineers.<br>Reviews and Approvals<br>Provides technical approval of key process engineering deliverables.<br>Performs independent technical reviews of engineering studies and proposals.<br>Represents Process Engineering in technical committees and strategic initiatives.<br>Key interactions<br>Internal: Liaise with colleagues and stakeholders for day-to-day work.<br>External: Consultants, contractors, vendors Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</n></p><p><strong>Desired Candidate Profile</strong></p><h4>Minimum Qualifications</h4><p>Minimum Qualifications for this position are an Engineering degree preferably in Chemical Engineering or relevant field</p><h4>Language requirements</h4><p>Excellent knowledge of written, read, and spoken English (required)</p><h4>Background and experience</h4><ul><li>5 years of of relevant refining/process engineering experience</li><li>Extensive experience in Hydro Processing (HPU, DHT, HCU) operations and optimization or relevant field .</li><li>Proven track record in leading process improvement and debottlenecking initiatives.</li><li>Experience leading refinery commissioning, start-up, and troubleshooting activities.</li><li>Strong experience in Process Safety Management (PSM), HAZOP, and MOC reviews.</li><li>Demonstrated capability in mentoring and developing junior engineers.</li><li>Advanced proficiency in process simulation and modeling tools (HYSYS, PetroSIM, UniSim).</li><li>Experience supporting cross-functional projects and strategic business initiatives.</li></ul><h4>Soft Skills</h4><ul><li>Strong Communication skill verbal and written.</li><li>Personal and Team Accountability</li><li>Accurate Reporting skills</li><li>Effective planning and organizing skills.</li><li>Proficient at interpreting Technical Drawings</li><li>Critical Thinking Skills</li><li>Result orientation</li><li>Planning and Organizing</li><li>Decisiveness</li><li>Exercising influence</li><li>Demonstrated ability to cooperate with and influence peers.</li><li>Strong leadership and mentoring skills.</li><li>Ability to lead cross-functional teams and technical workshops.</li><li>Strategic thinking and problem-solving capability.</li><li>Effective stakeholder management and influencing skills across all organizational levels.</li><li>Strong decision-making capability under operational and business pressures.</li></ul><h4>Technical Skills</h4><ul><li>Computer literacy including MS Office</li><li>SOP interpretation.</li><li>Good knowledge of modern Operation technologies &amp; Planning techniques for Hydro Processing (HPU, DHT, HCU) processes.</li><li>Knowledge of engineering best practices.</li><li>Sound judgment in technical matters with good skills in the engineering field.</li><li>Good knowledge of HSE / SCE equipment &amp; plans.</li><li>Knowledge in estimating, budgeting, and cost control.</li><li>Advanced proficiency in process simulation tools such as HYSYS and Petro-SIM.</li><li>Strong knowledge of refinery process optimization, energy efficiency, and debottlenecking techniques.</li><li>Experience with Advanced Process Control (APC), PI systems, and data analytics applications.</li><li>Knowledge of Process Safety Management (PSM), HAZOP, SIL, MOC, and Root Cause Analysis methodologies.</li><li>Strong understanding of refinery commissioning, start-up, shutdown, and turnaround activities.</li><li>Ability to review and approve engineering studies, design packages, and technical deliverables.</li></ul>

<ul><li>Prepare and study technical drawings, specifications of Electrical & Mechanical systems related to Power plants (Diesel / Gas), to ensure that installation and operations conform to Manufacturer’s recommended standards and customer requirements.</li><li>Direct and Coordinate with Customers for Construction & Installation support, documentation, and testing activities to ensure compliance with the agreed specifications and customer requirements.</li><li>Perform detailed calculations for Panel design / cable ratings etc related to Diesel / Gas Power Plant/s (415V / 11kV / 33kV) to comply with the standards and specifications.</li><li>Independently handle project execution to assure projects are completed satisfactorily, on time and within budget.</li><li>Develop budgets, estimate labor, material, and construction costs for the given projects / jobs.</li><li>Inspect completed installations and observe operations, to ensure conformity to design & equipment specifications and compliance with operational and safety standards.</li><li>Prepare specifications for purchase of materials and equipment required for the respective jobs / projects.</li><li>Supervise and train Project team members as per the required necessity.</li><li>Organise for Factory Acceptance tests & Site acceptance tests to the satisfaction of the Client / Consultants in line with the agreed specifications.</li><li>Investigate and test vendor’s products (like Panels / Transformers etc) at Vendor’s premises.</li><li>Investigate customer complaints related to Installations, determine nature and extent of problem, and recommend remedial measures.</li><li>Compile data and write progress reports regarding existing projects and compile handing over documents / drawings etc. of the completed projects.</li><li>Conduct pre tender site visits in coordination with the sales engineer/s to ascertain the technical / commercial requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s Degree in <strong>Electrical Engineering</strong>.</p></li><li><p><strong>6–10 years of relevant experience</strong> in Diesel/Gas Power Plants, Genset Projects, Power Generation or Electrical Project Engineering.</p></li><li><p>Strong experience in <strong>project execution, electrical installation, testing and commissioning</strong>.</p></li><li><p>Practical knowledge of <strong>415V / 11kV / 33kV electrical systems</strong>.</p></li><li><p>Experience with <strong>LV/MV switchgear, electrical panels, transformers, cables, protection systems and power distribution systems</strong>.</p></li><li><p>Experience in <strong>FAT, SAT, commissioning and customer/consultant inspections</strong>.</p></li><li><p>Ability to read and interpret <strong>SLDs, electrical schematics, cable schedules, panel drawings and technical specifications</strong>.</p></li><li><p>Experience in preparing electrical calculations, material specifications and project documentation.</p></li><li><p>Experience coordinating with <strong>customers, consultants, contractors and vendors</strong>.</p></li></ul>

<p><p>The vehicle inspector inspects all vehicle repairs to ensure maintenance is performed to the highest standard. Responsible for daily quality control of all vehicle repairs performed by the work center. Complies with all applicable USAF Technical Order (TO) requirements. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal accountabilities</h4> <ul> <li>Inspects all vehicle repairs to ensure quality control is maintained to the highest level.</li> <li>Monitors quality of work performed by technicians and documents rejected vehicle repairs.</li> <li>Ensures safety practices and housekeeping guidelines are maintained to the highest standard.</li> <li>Conducts impromptu toolbox inspections for accountability and serviceability of assigned tools.</li> <li>Informs the chief mechanic of any deficiencies noted.</li> <li>Conducts limited technical inspections (LTI's) on assigned vehicles and ensures inspections are performed within prescribed guidelines, determining the causes of malfunctions, extent of repairs required, parts required and cost of repair.</li> <li>Assists with on-the-job training of new mechanics; provides knowledge, expertise and training to mechanics; provides task certification for mechanics in training and certifies periodic training.</li> <li>Assists mechanics with repairs or replacement of parts and assemblies, realignment and adjustment systems including manual and automatic transmissions, steering and braking systems, clutches, fluid flywheels and torque converters, axle hubs and bearings, fuel air and cooling systems, suspension and body work.</li> <li>Assists mechanics with troubleshooting and calibrating vehicle systems using diagrams, manuals, special tools, meters and test equipment.</li> <li>Checks completeness and accuracy of maintenance forms such as work orders, parts requests and maintenance sheets; records data such as hours worked, work performed, speedometer/hour meter readings, parts used.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable reporting any deficiencies.</li> <li>Assists with parts research by means of the commercial manuals, technical orders and parts manuals; checks all parts research to ensure accuracy and that only required repair parts are ordered.</li> <li>Inspects vehicles after preparation of USAF vehicle assets for air/land/sea movement.</li> <li>Ensures all hazardous materials are handled, stored and disposed of in accordance with Amentum Standard Operating Procedures (SOPs) and host nation rules.</li> <li>Ensures that only current up-to-date technical orders and commercial manuals are used when repairing vehicles or assisting in repairs.</li> <li>Uses quality database to enter and maintain all inspections required by SOP, WI's and all PWs publications.</li> <li>Reports any discrepancies in shop first aid kits, fire extinguishers and eyewash stations.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have excellent organizational skills and be able to understand, speak, read and write English at an intermediate level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>Will be required to operate material handling equipment and light to heavy military type vehicles.</li> <li>High school diploma or equivalent required.</li> <li>Four years' experience in vehicle repair required with three years on USAF equipment required.</li> <li>Two years' experience in a quality control capacity and the ability to mentor individuals on a corrective action plan.</li> <li>Will be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Proficiency in the use of personal computers with Windows operating system and Microsoft Office to include as a minimum, Excel and Word systems is preferred.</li> <li>Recognized national qualification in vehicle maintenance at a higher level preferred.</li> </ul></p><p></p>

<p><p>The vehicle inspector inspects all vehicle repairs to ensure maintenance is performed to the highest standard. Responsible for daily quality control of all vehicle repairs performed by the work center. Complies with all applicable USAF Technical Order (TO) requirements. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal accountabilities</h4> <ul> <li>Inspects all vehicle repairs to ensure quality control is maintained to the highest level.</li> <li>Monitors quality of work performed by technicians and documents rejected vehicle repairs.</li> <li>Ensures safety practices and housekeeping guidelines are maintained to the highest standard.</li> <li>Conducts impromptu toolbox inspections for accountability and serviceability of assigned tools.</li> <li>Informs the chief mechanic of any deficiencies noted.</li> <li>Conducts limited technical inspections (LTI's) on assigned vehicles and ensures inspections are performed within prescribed guidelines, determining the causes of malfunctions, extent of repairs required, parts required and cost of repair.</li> <li>Assists with on-the-job training of new mechanics; provides knowledge, expertise and training to mechanics; provides task certification for mechanics in training and certifies periodic training.</li> <li>Assists mechanics with repairs or replacement of parts and assemblies, realignment and adjustment systems including manual and automatic transmissions, steering and braking systems, clutches, fluid flywheels and torque converters, axle hubs and bearings, fuel air and cooling systems, suspension and body work.</li> <li>Assists mechanics with troubleshooting and calibrating vehicle systems using diagrams, manuals, special tools, meters and test equipment.</li> <li>Checks completeness and accuracy of maintenance forms such as work orders, parts requests and maintenance sheets; records data such as hours worked, work performed, speedometer/hour meter readings, parts used.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable reporting any deficiencies.</li> <li>Assists with parts research by means of the commercial manuals, technical orders and parts manuals; checks all parts research to ensure accuracy and that only required repair parts are ordered.</li> <li>Inspects vehicles after preparation of USAF vehicle assets for air/land/sea movement.</li> <li>Ensures all hazardous materials are handled, stored and disposed of in accordance with Amentum Standard Operating Procedures (SOPs) and host nation rules.</li> <li>Ensures that only current up-to-date technical orders and commercial manuals are used when repairing vehicles or assisting in repairs.</li> <li>Uses quality database to enter and maintain all inspections required by SOP, WI's and all PWs publications.</li> <li>Reports any discrepancies in shop first aid kits, fire extinguishers and eyewash stations.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have excellent organizational skills and be able to understand, speak, read and write English at an intermediate level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>Will be required to operate material handling equipment and light to heavy military type vehicles.</li> <li>High school diploma or equivalent required.</li> <li>Four years' experience in vehicle repair required with three years on USAF equipment required.</li> <li>Two years' experience in a quality control capacity and the ability to mentor individuals on a corrective action plan.</li> <li>Will be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Proficiency in the use of personal computers with Windows operating system and Microsoft Office to include as a minimum, Excel and Word systems is preferred.</li> <li>Recognized national qualification in vehicle maintenance at a higher level preferred.</li> </ul></p><p></p>

<p>Project Engineer PEB (Pre-Engineered Buildings) Position: Project Engineer PEB (Pre-Engineered Buildings) Experience: 4 7 years in PEB / Structural Steel Projects Job Summary The Project Engineer PEB is responsible for planning, coordinating, executing, and monitoring Pre-Engineered Building projects from engineering and fabrication through site installation and handover. The role requires close coordination with clients, consultants, design teams, fabrication teams, suppliers, and site contractors to ensure projects are completed safely, on time, within budget, and according to approved specifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Qualifications Bachelor s Degree in Mechanical Engineering or Structural Engineering. 4 7 years of experience in PEB, structural steel, or industrial building projects. Good knowledge of PEB design, fabrication, and erection processes. Knowledge of structural steel materials, connections, cladding systems, and erection methods.</p>

<p>Position: Resident Engineer (including Design Review)</p><p><strong>Desired Candidate Profile</strong></p><p><b>Qualification</b>: B.Sc. Degree in Civil or Mechanical Engineering (or related field); PMP Certificate preferred</p><p>Years of Experience: 20+ years total; min. 10 years with a consultancy; completed at least two (2) projects of similar size/value as Resident Engineer/Project Manager from inception to closeout</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Execute Electrical Maintenance Works B-60, under delegated authority and direction from TL Maintenance B60 as Technical Service provider of maintenance and execution of minor projects, modifications in accordance with the technical standards to maintain the assets through: (1) Leading the design Maintenance Electrical services on planned / un-planned maintenance works utilizing best practice. (2) Coordination and supervision of assets, products and maintenance work in the designated area, (3) Implement plans and coordinate Electrical maintenance works; in order to ensure plant equipment availability, reliability &amp; optimization of cost / resources while facilitating smooth operations of the plant to meet operational targets.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><p>Accountable for continuous flow of electrical power to plant / Substations / buildings.</p><p>Ensure application of best work practices in execution of electrical maintenance jobs.</p><p>Responsible for electrical side of project implementation in Gas Network facilities.</p><p>Implements the Preventive Maintenance (PM) plan within his section and execution along with work backlogs</p><p>Prepares procurement plan for his section.</p><p>Responsible for issuing Work Permits on electrical side and implementing Lock Out Tag Out (LOTO) procedure.</p><p>In emergency drills or emergency situations maintains close liaison with On-Scene Commander and Operation Coordinator, for ensuring quick restoration of power.</p><p>Participate in Management of Change (MOC) committee review meetings.</p><p>Ensure electrical equipment maintenance history &amp; reports are updated in SAP (CMMS)</p><p>Implements the Corrective Maintenance (CM) plan within his section and execution along with work backlogs</p><p>Ensure to raise Z1 notification for CM activity in SAP</p><p>Identify the critical issues, repetitive failure of Electrical equipment, done and the RCA Recommendations implemented for the area</p><p>Monitors staff attendance, attitude and implements discipline within the section.</p><p>Prepare annual leave plans</p><p>Full technical &amp; manpower support during plants shutdown.</p><p>Determines long term Electrical maintenance policy and oversees detailed planning of maintenance activities and programs.</p><p>Reviews policies of warehouse materials/spare parts and determines strategy of their handling and procurement and ensures availability.</p><p>Coordinates efforts within the Section to develop guidelines, specifications, best practices and procedures for maintenance</p><p>Maintains technical expertise in functional areas.</p><p>Carries out the technical evaluation of bids and generates the evaluation report.</p><p>Develops IDP of Omanis within the section, prepares training programs and monitors their implementation</p><p><strong>Key Interactions</strong></p><p>Internal: Field Operators, Shift Team Leader, Panel Operators, Maintenance Coordinator, Process Trainer, Technical Services Department, Sr. / Engineer Operations.</p><p>External: Ministries, Civil Defense, ROP and Neighboring Companies</p><p><strong>Notable Working Conditions.</strong> Field Operations and office environment, Moderate to intensive computer screen use.</p><p>2+ years of relevant experience</p><p>Knowledge of maintenance processes for Gas Network operations</p><p>Knowledge of Electrical control loops.</p><p>Familiar with Systems, Applications and Products in data processing (SAP).</p><p>Expertise in High Tension voltage, Substation, Switch gear, MCC and Power network</p><p>Experience on pre-commissioning and commissioning of Power Sub Station</p><p>Good knowledge of modern maintenance technologies &amp; maintenance Planning and execution of Electrical Equipment s, Substation, EDGs, VFD Drives, Power electronics, 33KV OHL, UPS,</p><p>Sound judgment in technical matters with good skills in engineering field materials specifications and international standards.</p><p>Good experience in handling Maintenance Contracts and shutdown related jobs.</p><p>Knowledge of:</p><p>Computerized Maintenance Management Systems (CMMS)</p><p>Expertise in SAP- PM, CM&amp;Z1</p><p>Process Equipment Life-Cycle Management</p><p>Good knowledge in Quality Assurance, Quality Control and HSE plans.</p><p>Familiar with techniques for ensuring data integrity with various integration of information/ reports</p><p>Knowledgeable in HSE plans related to maintenance activities.</p><p>Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals</p><p><strong>Soft:</strong></p><p>Through use of facts</p><p>Troubleshooting and result oriented</p><p>Verbal and writing reporting skills-effective Communication</p><p>Demonstrated leadership impact to deliver improved and sustained performance</p><p>Able to build relationships within department staff and contractors with a focus on collaboration.</p><p>Ability to manage multiple priorities in a diversified and critical environment.</p><p><strong>Technical:</strong></p><p>Root Cause Analysis (RCA)</p><p>Reading and interpreting engineering drawings</p><p>Project Management</p><p>Developing and Modifying Technical Procedures</p><p>Ability to align the requirements of operations and maintenance</p><p>Familiar with techniques for ensuring data integrity with various integration of information/ reports</p><p>Knowledge in estimating, budgeting and cost control.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Minimum Qualifications Diploma in Electrical Engineering or similar<br>Language requirements Excellent knowledge of written, read, and spoken English (required), Arabic - Native (desirable)<br>Competencies and skills<br>2+ years of relevant experience<br>Knowledge of maintenance processes for Gas Network operations<br>Knowledge of Electrical control loops.<br>Familiar with Systems, Applications and Products in data processing (SAP).<br>Expertise in High Tension voltage, Substation, Switch gear, MCC and Power network<br>Experience on pre-commissioning and commissioning of Power Sub Station<br>Good knowledge of modern maintenance technologies &amp; maintenance Planning and execution of Electrical Equipment s, Substation, EDGs, VFD Drives, Power electronics, 33KV OHL, UPS,<br>Sound judgment in technical matters with good skills in engineering field materials specifications and international standards.<br>Good experience in handling Maintenance Contracts and shutdown related jobs.<br>Knowledge of:<br>Computerized Maintenance Management Systems (CMMS)<br>Expertise in SAP- PM, CM&amp;Z1<br>Process Equipment Life-Cycle Management<br>Good knowledge in Quality Assurance, Quality Control and HSE plans.<br>Familiar with techniques for ensuring data integrity with various integration of information/ reports<br>Knowledgeable in HSE plans related to maintenance activities.<br>Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals<br>Soft:<br>Through use of facts<br>Troubleshooting and result oriented<br>Verbal and writing reporting skills-effective Communication<br>Demonstrated leadership impact to deliver improved and sustained performance<br>Able to build relationships within department staff and contractors with a focus on collaboration.<br>Ability to manage multiple priorities in a diversified and critical environment.<br>Technical:<br>Root Cause Analysis (RCA)<br>Reading and interpreting engineering drawings<br>Project Management<br>Developing and Modifying Technical Procedures<br>Ability to align the requirements of operations and maintenance<br>Familiar with techniques for ensuring data integrity with various integration of information/ reports<br>Knowledge in estimating, budgeting and cost control.</p></section>

<p><b>Brief Posting Description </b></p> <p>The Senior HSE &amp; Emergency Response Specialist is responsible for supporting the implementation and continual improvement of Health, Safety, Environment (HSE), Emergency Response, Fire Protection, and Environmental Management programs across mining operations, process plant facilities, workshops, warehouses, camps, and associated infrastructure.</p> <p>The role provides technical expertise in occupational health and safety, process plant safety, mining safety, emergency preparedness, firefighting, rescue operations, incident investigation, contractor management, and environmental compliance. The position ensures operational activities are conducted safely and in compliance with company standards, regulatory requirements, and international best practices while maintaining emergency response readiness across all MMC operations.</p> <p>Detailed Description </p> <p>MINING &amp; PROCESS PLANT HSE MANAGEMENT</p> <p>Support implementation and continual improvement of the Company's HSE Management System.</p> <p>Conduct HSE inspections and audits across open-pit mining operations, crushing plants, process plants, workshops, warehouses, laboratories, fuel storage facilities, and camps.</p> <p>Monitor compliance with company HSE procedures, permit-to-work systems, and regulatory requirements.</p> <p>Participate in Hazard Identification (HAZID), Job Safety Analysis (JSA), Task Risk Assessments (TRA), and Critical Risk Management processes.</p> <p>Monitor safe operation of mining equipment, haul roads, crushers, conveyors, stackers, reclaimers, mills, screening plants, and associated facilities.</p> <p>Support implementation of critical controls for mobile equipment, working at height, confined space entry, lifting operations, energy isolation (LOTO), and blasting activities.</p> <p>Conduct workplace exposure assessments related to dust, chemical exposure, noise, vibration, heat stress, and occupational health hazards.</p> <p>Review contractor activities and monitor contractor HSE compliance.</p> <p>Support operational departments in developing safe work procedures and risk mitigation measures.</p> <p>Promote a proactive safety culture through field engagement, coaching, and leadership interaction.</p> <p>PROCESS SAFETY MANAGEMENT</p> <p>Support process safety management activities within crushing, screening, ore handling, beneficiation, and processing facilities.</p> <p>Participate in process hazard reviews and risk assessments.</p> <p>Monitor implementation of process safety controls and operational safeguards.</p> <p>Assist in identifying potential process safety risks associated with equipment failures, fires, explosions, chemical releases, and loss of containment events.</p> <p>Participate in Management of Change (MOC) reviews.</p> <p>Support emergency shutdown and business continuity planning activities.</p> <p>INCIDENT INVESTIGATION &amp; REPORTING</p> <p>Lead or participate in investigations of all incidents, injuries, near misses, property damage, process safety events, environmental incidents, and dangerous occurrences.</p> <p>Conduct root cause analysis and develop preventive and corrective actions.</p> <p>Track and monitor action items until closure.</p> <p>Prepare comprehensive investigation reports and lessons-learned communications.</p> <p>Analyze trends and recommend improvement initiatives.</p> <p>EMERGENCY RESPONSE &amp; FIRE PROTECTION</p> <p>Respond to emergencies including fires, medical emergencies, rescue incidents, equipment failures, chemical releases, and environmental incidents.</p> <p>Perform industrial firefighting activities involving fixed plant facilities, mobile equipment, fuel storage areas, workshops, and buildings.</p> <p>Conduct rescue operations including vehicle extrication, confined space rescue, rope rescue, and recovery operations.</p> <p>Participate in mine rescue activities when required.</p> <p>Coordinate emergency response activities during operational incidents.</p> <p>Maintain readiness of emergency response facilities and resources.</p> <p>Provide Emergency First Aid and CPR as required.</p> <p>Support emergency evacuation and emergency communications during incidents.</p> <p>EMERGENCY PREPAREDNESS</p> <p>Develop, review, and update Emergency Response Plans (ERP) for mining and process plant operations.</p> <p>Conduct emergency drills and simulations for:</p> <p>Mine emergencies</p> <p>Process plant incidents</p> <p>Fire scenarios</p> <p>Chemical spills</p> <p>Confined space rescue</p> <p>Medical emergencies</p> <p>Vehicle accidents</p> <p>Environmental emergencies</p> <p>Evaluate drill effectiveness and implement improvement actions.</p> <p>Coordinate with Civil Defence, Ambulance Services, hospitals, and other external emergency organizations.</p> <p>Support emergency response training and competency management programs.</p> <p><br></p> <p><b>Education: </b></p> <p> Bachalor s Degree in Health and Safety, Fire and Safety, or a related discipline required.</p> <p>Certifications: </p> <p> NEBOSH - IGC / IOSH Managing Safely is mandatory</p> <p>Following certifications are added advantages.</p> <p> NEBOSH International Diploma</p> <p> </p> <p> Incident Investigation Certification</p> <p> </p> <p> Industrial Firefighting Certification</p> <p> </p> <p> Emergency Response &amp; Rescue Certification</p> <p> </p> <p> Mine Rescue Certification</p> <p> </p> <p> First Aid &amp; CPR Certification</p> <p> </p> <p> Hazardous Materials (HazMat) Response Certification</p> <p> </p> <p> Confined Space Rescue Certification</p> <p> </p> <p> Incident Command System (ICS) Training</p> <p> </p> <p><b>Experience: </b></p> <p> Minimum 7 years of HSE and Emergency Response experience in mining, mineral processing, metals, cement, heavy industry, or oil &amp; gas sectors.</p> <p> </p> <p> Minimum 3 years in open-pit mining and/or mineral processing operations.</p> <p> </p> <p> Experience in emergency response planning and firefighting operations.</p> <p> </p> <p> Experience conducting incident investigations and risk assessments.</p> <p><br></p>

<ul><li><p>Field demonstrations and hands-on customer visits to drive pipeline growth, actively identifying and qualifying new sales opportunities alongside cold outreach, phone calls, networking, and business directories.</p></li><li><p>Conduct product demonstrations at job sites and explain product features, applications and benefits to customers.</p></li><li><p>Generate leads and develop new customers for power tools and related products.</p></li><li><p>Maintain regular follow-ups with customers and manage sales activities, enquiries, quotations, emails, call logs and appointments.</p></li><li><p>Achieve monthly sales targets and business development objectives.</p></li><li><p>Understand customer requirements and recommend suitable power tools and solutions.</p></li><li><p>Handle the complete sales cycle from enquiry generation to order confirmation.</p></li><li><p>Manage key accounts and develop strong, long-term customer relationships.</p></li><li><p>Coordinate with internal teams regarding product availability, delivery, technical requirements and customer support.</p></li><li><p>Maintain awareness of competitor products, market trends and pricing.</p></li><li><p>Provide basic after-sales support and coordinate with the service team to address customer requirements.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Age 22- 30 years</p></li><li><p>Minimum 1-3 years of experience as a Sales Engineer / Sales Executive in power tools or industrial equipment.</p></li><li><p>Diploma / ITI / Engineering qualification in Mechanical, Production, Automobile or Electrical fields.</p></li><li><p>Experience handling power tool brands such as HiKOKI (Hitachi), Makita, Bosch or DeWalt will be highly preferred.</p></li><li><p>Candidates with experience in trading companies in GCC or India are preferred.</p></li><li><p>Strong technical knowledge of professional and industrial power tools.</p></li><li><p>Experience in product demonstrations, technical comparisons and value selling.</p></li><li><p>Experience handling the complete sales cycle, including enquiry generation, quotation, negotiation, order closing and payment collection.</p></li><li><p>Good English communication skills.</p></li><li><p>Willingness to travel for customer visits and sales activities.</p></li><li><p>Good customer relationship and business development skills.</p></li><li><p>Proficiency in MS Word, Excel, PowerPoint, email communication and basic file management.</p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Technician Instrument Grade Stream OQEP Function Operated Assets operations - B60 Field Operation Maintenance Location Oman B60 Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to TL B60 Maintenance Direct reports 0 Job purpose </p><p>Execute Instrument Maintenance Works for B-60, under delegated authority and direction from TL Maintenance B-60 as Technical Service provider of maintenance and execution of minor projects, modifications in accordance with the technical standards to maintain the assets through: (1) Leading the design Maintenance instrument services on planned / un-planned maintenance works utilizing best practice. (2) Coordination and supervision of assets, products and maintenance work in the designated area, (3) Implement plans and coordinate instrument maintenance works; in order to ensure plant equipment availability, reliability &amp; optimization of cost / resources while facilitating smooth operations of the plant to meet operational targets.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Main tasks and responsibilities</p><ul><li>Accountable for availability of Instrumentations, Analyzers and Controls systems, UPS/BC and communication system of the area</li><li>Ensure application of best work practices in execution of Instrumentations maintenance jobs.</li><li>Responsible for Instrumentations side of project implementation in SF B-60 facilities.</li><li>Implements the Preventive Maintenance (PM) plan within his section and execution along with work backlogs</li><li>Prepares procurement plan for his section.</li><li>Responsible for preparing the LLF of instruments and its implementations</li><li>Participate in Management of Change (MOC) committee review meetings.</li><li>Ensure Instrument equipment maintenance history &amp; reports are updated in SAP (CMMS)</li><li>Identify the critical issues, repetitive failure of Instrument equipment, done and the RCA Recommendations implemented for the area</li><li>Monitors staff attendance, attitude and implements discipline within the section.</li><li>Prepare annual leave plans</li><li>Directs, supervises and controls all work for instruments maintenance and calibration.</li><li>Receives and analyses periodic reports on instruments maintenance and scheduled turnarounds and determines the best course of action for increasing the Section s efficiency.</li><li>Provides full technical &amp; manpower support during plants shutdown.</li><li>Determines long term instrument maintenance policy and oversees detailed planning of maintenance activities and programs.</li><li>Reviews policies of warehouse materials/spare parts and determines strategy of their handling and procurement and ensures availability.</li><li>Coordinates efforts within the Section to develop guidelines, specifications, best practices and procedures for maintenance of pressure, level, flow, temperature, vibration and pH instruments.</li><li>Maintains technical expertise in functional areas of process instrumentation.</li></ul><p>Key Interactions</p><ul><li>Internal: Field Operators, Shift Team Leader, Panel Operators, Maintenance Coordinator, Process Trainer, Technical Services Department, Sr. / Engineer Operations.</li><li>External: Ministries, Civil Defense, ROP and Neighboring Companies</li></ul><p>Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Qualifications Diploma i in Instrumentation Engineering or similar</li><li>Excellent knowledge of written, read, and spoken English (required), Arabic - Native (desirable)</li><li>2+ years of relevant experience</li><li>Relevant experience in similar role (Oil &amp; Gas)</li><li>Knowledge of maintenance processes for Gas Network operations:</li><li>Knowledge of instrument control loops.</li><li>Familiar with Systems, Applications and Products in data processing (SAP).</li><li>Experience on Local control station/ Plant interface bus and DCS.</li><li>Good knowledge of modern maintenance technologies &amp; maintenance Planning and execution of Instrumentation Equipment s, Analysers, Calibrations, control systems, ESDs</li><li>Experience and knowledge in project planning, cost control, contract development, installation, trouble shooting, and start-up.</li><li>Sound judgment in technical matters with good skills in engineering field materials specifications and international standards.</li><li>Good experience in handling Maintenance Contracts and shutdown related jobs.</li><li>Knowledge of:</li><li>Computerized Maintenance Management Systems (CMMS)</li><li>Expertise in SAP- PM</li><li>Process Equipment Life-Cycle Management</li><li>Good knowledge in Quality Assurance, Quality Control and HSE plans.</li><li>Familiar with techniques for ensuring data integrity with various integration of information/ reports</li><li>Knowledgeable in HSE plans related to maintenance activities.</li><li>Understanding of Process (P&amp;IDs / PFDs) &amp; Engineering drawings and OEM manuals.</li><li>Soft:</li><li>Ve rbal and writing reporting skills-effective Communication</li><li>Demonstrated leadership impact to deliver improved and sustained performance</li><li>Able to build relationships within department staff and contractors with a focus on collaboration.</li><li>Ability to manage multiple priorities in a diversified and critical environment.</li><li>Technical:</li><li>Through use of facts</li><li>Troubleshooting and result oriented</li><li>Root Cause Analysis (RCA)</li><li>Reading and interpreting engineering drawings</li><li>Project Management</li><li>Developing and Modifying Technical Procedures</li><li>Ability to align the requirements of operations and maintenance</li><li>Familiar with techniques for ensuring data integrity with various integration of information/ reports</li><li>Knowledge in estimating, budgeting and cost control</li></ul><p></p></section>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Principal safety engineer</h4> <p>Minimum of 20 years total experience in engineering or consultancy of oil and gas facilities, including a minimum of 15 years’ experience in TSE in onshore oil and gas facilities with demonstrated TSE deliverables development and assurance experience (BP, Shell, PDO projects experience is mandatory).</p> <ul> <li>Track record of managing major oil and gas engineering projects as lead safety engineer (CAPEX > 100 million USD) spanning various project life cycle stages such as feasibility, concept, FEED, execute, project to asset transition.</li> <li>Demonstrated experience in development and assurance of:</li> <ul> <li>HSE philosophy, fire and gas philosophy, F & G cause and effects, F & G layouts, F & G mapping.</li> <li>FEA/FGDEA, flare radiation and dispersion studies, safety equipment layouts, input to facility layouts/facility siting and layout studies, EPZ calculation, QRA. Experience/conducted studies using Shell FRED, SHEPHERD software and/or other PEM/risk integration software. Formal certification preferred.</li> <li>Hazardous area classification, critical element identification, performance standards, bow ties.</li> <li>ALARP (as low as reasonably practicable), design HSE case, operations HSE case, AIPSM (asset integrity-process safety management) and HEMP (hazard and effect management process).</li> <li>Loss prevention aspects such as fire safety, fire protection design (FW demand, hydraulics, surge, PFDs/P & IDs, etc.), escape and fire fighting design.</li> <li>Human factors engineering studies experience (valve criticality, HFE screening, etc).</li> </ul> <li>Facilitated/led workshops for technical safety, which may include but not be limited to HAZID, HAZOP, bowties, ALARP demonstration, MOPO/SIMOPs workshop, SCE identification workshops, DEM1/DEM2/LFI screenings and demonstrations and other HEMP studies.</li> <li>Adequate involvement in safeguarding reviews such as design review, HAZOP, IPF, etc.</li> <li>Involvement in vendor documents evaluations (e.g. technical bid evaluation, datasheets/specifications/MR).</li> </ul> <p>Bachelor’s degree in chemical, mechanical or process safety engineering.</p> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> The Avionics Technician (F-16 Block 50+) fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of instrumentation including: area surveillance, telemetry, radar, or global positioning system (GPS) metric track (MT). Conducts special technical studies and reports regarding instrumentation configuration, acceptance, and/or performance.</p> <p><strong>Job description:</strong><br> Perform or supervise functions involving installation, repair, testing, and modification on NAV attack, flight controls radar, SMS, Comm/Nav and ECM systems.<br> Operates avionics systems by using aircraft controls to determine operational condition.<br> Interprets equipment operating characteristics to isolate malfunctions in systems such as attack control, radar infrared, laser, instruments, displays, flight control, communication, navigation, satellite communications, identification, defensive and offensive ECM systems.<br> Uses technical data wiring diagrams, electronic measurement equipment, AGE/GSE, and special tools.<br> Removes and installs components. Performs and supervises alignment calibration and bore sight of avionics systems. Uploads operational software into system components.<br> Inspects, analyzes and evaluates avionics systems. Interprets inspection findings and determines adequacy of corrective actions.<br> Reviews maintenance management publications and procedures. Recommends methods to improve equipment performance and maintenance procedures.<br> Performs on-the-job training and instruction, supervises and accepts work performed by RAFO technicians.</p> <p><strong>Minimum requirements:</strong></p> <ul> <li>5 years F-16 Block 50+ or 8 years supporting F-16 aircraft.</li> <li>AFSC 2A3X4, 2A354, or 2A374 F-16 Block 50 integrated avionics or equivalent.</li> <li>Performed and/or supervised functions involving installation, repair, testing, and modification on F-16 Block 50 and up avionics systems.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma.</li> </ul> <p><strong>Clearance requirements:</strong><br> Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <p><strong>Physical/preferred qualifications:</strong></p> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and cuts and bruises from using tools in close proximity and hazards of moving vehicles such as forklifts in shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul></p><p></p>

<p> <strong>Role &amp; responsibilities</strong> </p> <p> </p> <ul> <li>Field demonstrations and hands-on customer visits to drive pipeline growth, actively identifying and qualifying new sales opportunities alongside cold outreach, phone calls, networking, and business directories.</li> <li>Conduct product demonstrations at job sites and explain product features, applications and benefits to customers.</li> <li>Generate leads and develop new customers for power tools and related products.</li> <li>Maintain regular follow-ups with customers and manage sales activities, enquiries, quotations, emails, call logs and appointments.</li> <li>Achieve monthly sales targets and business development objectives.</li> <li>Understand customer requirements and recommend suitable power tools and solutions.</li> <li>Handle the complete sales cycle from enquiry generation to order confirmation.</li> <li>Manage key accounts and develop strong, long-term customer relationships.</li> <li>Coordinate with internal teams regarding product availability, delivery, technical requirements and customer support.</li> <li>Maintain awareness of competitor products, market trends and pricing.</li> <li>Provide basic after-sales support and coordinate with the service team to address customer requirements.</li> </ul> <br> <p> <strong>Preferred candidate profile</strong> </p> <p> </p> <ul> <li>Age 22- 30 years</li> <li>Minimum 1-3 years of experience as a Sales Engineer / Sales Executive in power tools or industrial equipment.</li> <li>Diploma / ITI / Engineering qualification in Mechanical, Production, Automobile or Electrical fields.</li> <li>Experience handling power tool brands such as HiKOKI (Hitachi), Makita, Bosch or DeWalt will be highly preferred.</li> <li>Candidates with experience in trading companies in GCC or India are preferred.</li> <li>Strong technical knowledge of professional and industrial power tools.</li> <li>Experience in product demonstrations, technical comparisons and value selling.</li> <li>Experience handling the complete sales cycle, including enquiry generation, quotation, negotiation, order closing and payment collection.</li> <li>Good English communication skills.</li> <li>Willingness to travel for customer visits and sales activities.</li> <li>Good customer relationship and business development skills.</li> <li>Proficiency in MS Word, Excel, PowerPoint, email communication and basic file management.</li> </ul> <br>

<p>We are excited to announce a new luxury Nikki Beach Resort &amp; Spa project in Yiti Bay, Sultanate of Oman, and we are looking for a seasoned Director of Maintenance &amp; Conservation to join our pre-opening leadership team. This is a unique opportunity to be part of a landmark development from the ground up, shaping the engineering and facilities function from pre-opening through to full operations. The ideal candidate is a hospitality engineering leader with a strong technical background, excellent organizational skills, and proven experience in pre-opening resort or hotel projects.</p><p><b>Key Responsibilitie</b>s:</p><ul><li>Lead all engineering, maintenance, and technical operations during the pre-opening phase and beyond.</li><li>Work closely with the construction, design, and project teams to ensure engineering standards and systems are aligned with brand and safety requirements.</li><li>Develop and implement preventive maintenance schedules and engineering policies for all areas of the resort (HVAC, electrical, plumbing, water treatment, fire safety systems, etc.).</li><li>Hire, train, and manage the engineering team to ensure smooth operations from day one.</li><li>Oversee energy management, sustainability efforts, and regulatory compliance.</li><li>Manage budgets, equipment procurement, and contractor/vendor relationships.</li><li>Support risk management initiatives, emergency preparedness, and workplace safety.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 8 10 years of experience in engineering or technical services within the hospitality industry.</li><li>At least 3 years in a leadership role, preferably as Director of Engineering or Chief Engineer.</li><li>Pre-opening experience in resorts or hotels is highly preferred.</li><li>Prior work experience in Oman is an advantage</li><li>Strong knowledge of building systems, mechanical/electrical infrastructure, and health &amp; safety standards.</li><li>Ability to read and interpret blueprints and technical documents.</li><li>Proven ability to lead diverse teams and work collaboratively with various departments.</li><li>Excellent communication, leadership, and problem-solving skills.</li><li>Degree or diploma in Engineering, Facilities Management, or a related field.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br>Under direct supervision, trains and becomes familiar with the chemical hygiene plan and the current HSE laboratory safety standards. Follows prescribed safety rules and regulations in performing assigned duties. Performs duties to conduct prototype or laboratory tests following prescribed procedures. Learns to build equipment and/or perform basic material or environmental tests using basic techniques with electrical/electronic, chemical, and mechanical equipment. Learns to document test data for reporting purposes. Maintains files and documentation related to test equipment and test results of equipment. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Skills typically through eight (8) hours of college chemistry (preferred).<br><br><b>Qualifications</b> <br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Str 2316, Bdg 65, Assarain Bdg,&nbsp;Muscat,&nbsp;Muscat,&nbsp;, Oman</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210945&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Entry-Level&nbsp;<br><strong>Job Family:</strong>&nbsp;Engineering/Science/Technology&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Baroid&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<p>Job Description:</p><p>Mechanical Engineer -Field Coordination &amp; Supervision</p><p>Knowledge &amp; Qualification:</p><p>Bachelor Degree in Mechanical Engg Good knowledge in English</p><p>Role &amp; Responsibilities:</p><p>a) who have overseas experience more than 04 years (prefer ARAMCO project experience &amp; HDEC experience) b) who have experience of Stack or Compressor or Field Tank installation.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>We are hiring experienced Hydraulic Mechanic Technicians for a reputed company in Oman. Candidates must have hands-on experience in hydraulic hose assembly, maintenance, and repair of hydraulic systems used in trucks and heavy equipment. Gulf experience is mandatory.</p><p>Key Responsibilities</p><ul><li>Assemble, install, and repair hydraulic hoses and fittings.</li><li>Diagnose and troubleshoot hydraulic system faults in trucks and heavy equipment.</li><li>Replace damaged hoses, seals, valves, and hydraulic components.</li><li>Perform preventive and corrective maintenance on hydraulic systems.</li><li>Inspect hydraulic equipment to ensure safe and efficient operation.</li><li>Read and interpret hydraulic diagrams and technical manuals.</li><li>Maintain tools and ensure compliance with safety standards.</li><li>Prepare service reports and maintain maintenance records.</li></ul><p>Requirements</p><ul><li>Minimum 2+ years of experience as a Hydraulic Mechanic Technician.</li><li>Hands-on experience with trucks and heavy equipment hydraulic systems.</li><li>Ability to diagnose and repair hydraulic hose assemblies and components.</li><li>Good knowledge of hydraulic tools, fittings, pumps, valves, and cylinders.</li><li>Age: Up to 40 years.</li><li>Male candidates only.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum 2+ years of experience as a Hydraulic Mechanic Technician. Hands-on experience with trucks and heavy equipment hydraulic systems. Ability to diagnose and repair hydraulic hose assemblies and components. Gulf experience is mandatory. Good knowledge of hydraulic tools, fittings, pumps, valves, and cylinders. Age: Up to 40 years. Male candidates only.</p>

<p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 11,000 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world. For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><p>The Testing &amp; Commissioning Engineer will be responsible for planning, managing, coordinating, and performing all activities related to the testing and commissioning of systems and equipment for large-scale PMC (Project Management Consultancy) infrastructure projects, particularly in the railway sector. The candidate will ensure that all systems function safely and according to project requirements prior to handover.</p><p><strong>Missions/Main Duties</strong></p><ul><li>Develop, review, and update testing and commissioning plans, procedures, and schedules to match project timelines.</li><li>Collaborate with design, construction, and systems teams to identify commissioning requirements and interfaces.</li><li>Lead and execute on-site testing and commissioning for various systems (electrical, mechanical, signaling, telecom, etc.).</li><li>Ensure all installations and systems meet contract specifications, safety standards, and regulatory codes.</li><li>Lead technical workshops, readiness reviews, and T&amp;C governance meetings to ensure alignment across all stakeholders.</li><li>Manage the Design and Build contractor s Factory Acceptance Testing, System Integration Testing, and Site Acceptance Testing for complex railway systems, ensuring full technical compliance, seamless system integration, and a smooth handover to operations.</li><li>Supervise and validate the testing and commissioning performed by vendors and contractors.</li><li>Coordinate with all project stakeholders to resolve issues and ensure smooth project handover.</li><li>Conduct meetings to track progress, address challenges, and review commissioning documentation.</li><li>Review and approve inspection test plans, method statements, and testing procedures.</li><li>Oversee final system integration, performance testing, and acceptance activities.</li><li>Prepare and submit final commissioning documents and as-built records.</li><li>Support training and transition for the client s operations team.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electrical Engineering, Mechanical Engineering, or a related field.</li><li>Minimum 10 years of relevant experience in Testing &amp; Commissioning roles, preferably within railway or large infrastructure PMC projects.</li><li>Proven experience leading testing and commissioning for multi-disciplinary systems.</li><li>Sound knowledge of applicable international standards and safety regulations</li><li>Strong understanding of project management methodologies and PMC practices.</li></ul>

<p>Key Responsibilities Diagnose and repair electrical and electronic faults in heavy equipment. Perform preventive, corrective, and emergency maintenance. Carry out equipment inspection, servicing, repair, and maintenance at job sites. Troubleshoot electrical and electronic systems to identify and resolve issues. Ensure maximum equipment availability and minimize downtime. Use diagnostic tools and equipment for fault detection and repair. Coordinate with the maintenance team to complete work safely and on time. Follow safety procedures and maintenance standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Requirements Minimum 9+ years of hands-on experience as an Electrical/Electronics Technician. Strong experience in repairing, operating, and diagnosing heavy equipment. Experience in electrical and electronic troubleshooting and maintenance. Ability to work independently and as part of a team. Basic English communication skills required. Candidates with heavy equipment or construction machinery experience will be preferred.</p>