Heavy equipment mechanical engineer Jobs

<ul><li><p>Operate assigned equipment (excavator, loader, forklift, crane, grader, etc.) safely and efficiently as per site and client requirements.</p><ol><li><p>Conduct pre-start and post-operation inspections of equipment, ensuring safe operating condition and reporting defects immediately.</p></li><li><p>Follow all HSE policies, Golden Rules, and Client Equipment Operation Guidelines during equipment use.</p></li><li><p>Assist in loading, unloading, lifting, and transporting materials in compliance with load handling and lifting standards.</p></li><li><p>Perform basic troubleshooting and first-line maintenance such as checking fuel, oil, hydraulics, cooling systems, brakes, and tires.</p></li><li><p>Adhere to Journey Management and Permit-to-Work (PTW) systems, ensuring operations are authorized and risk assessed.</p></li><li><p>Maintain accurate operation logs and usage records, reporting any incidents, near misses, or unsafe conditions.</p></li><li><p>Ensure equipment is kept clean and in proper working condition at all times.</p></li><li><p>Demonstrate awareness of desert/off-road operation procedures and towing/recovery guidelines in case of stuck or breakdown situations.</p></li><li><p>Follow supervisor’s instructions and complete tasks on time without operational or industrial wastage.</p></li><li><p>Follow the instructions of the supervisor and ensure timely completion of assigned tasks without causing industrial or operational wastage.</p></li><li><p>Any additional responsibilities as instructed by immediate supervisor or management.</p></li></ol></li></ul><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Valid Oman Driving License (minimum 5 years old)</p></li><li><p>Valid OPAL Lifting Certificate</p></li><li><p>Valid RTITB Competent Card for the relevant equipment category</p></li><li><p>School Education with English writing and reading ability</p></li><li><p>Valid Omani Equipment Operator License for relevant category</p></li><li><p>Experience in O&G industry and knowledge of Defensive Driving will be added advantage</p></li><li><p>Knowledge of basic mechanical troubleshooting of heavy equipment.</p></li><li><p>Familiarity with lifting guidelines, load charts, and equipment safety protocols</p></li></ol><p><br></p>

<p><br></p><p>- A) Senior Estimation &amp; Proposal Engineer</p><p>1) Degree in Mechanical Engineering.</p><p>2) 8+ years of experience in Estimation &amp; Proposal writing</p><p>3) Minimum 4+ year experience in EPC estimation and proposal / 6+ Years experience in construction estimation</p><p>4) Strong knowledge of international codes and standards</p><p>5) Strong knowledge of international codes and standards</p><p>6) Experience in bidding for long-term contracts is an added advantage.</p><p>7) Familiarity with local construction codes and regulations.</p><p>8) Working knowledge of PDO, OQ, and Oxy specifications.</p><p>9) Experience in contract processing and contract management.</p><p>10) GCC / Oman experience is a must</p><p>- B) Sales Engineer (Rotating &amp; Static)</p><p>5 Years of experience require</p><p>1) Degree in Mechanical / Chemical Engineering.</p><p>2) Identify, target and create prospects for business development.</p><p>3) Sales and marketing activities for the Principal / representing companies and their products.</p><p>4) Manage various aspects of project information in to competitive intelligence system</p><p>5) Networking with key personnel of both clients and Principals</p><p>6) To meet or exceed sales targets consistently</p><p>7) Responsible for sending product information, proposals and quotes, correspondence to follow up and to generate new sales, and maintaining accurate database of all contact interactions</p><p>8) To prepare tenders for various projects involving equipment</p><p>9) Reporting to the Sales Manager</p><p>10) GCC / Oman experience is a must</p><p>- C) Painting &amp; Coating Inspector</p><p>1) Diploma / Degree in Mechanical, Chemical, or related engineering discipline.</p><p>2) Minimum 5 years of experience in painting/coating inspection for oil &amp; gas, industrial, or EPCC projects in Oman or the GCC, including workshop / manufacturing environments.</p><p>3) Valid BGAS or NACE Level II Coating Inspector certificate (mandatory).</p><p>4) Hands-on expertise in inspection of piping external, vessel internal/external, and storage tank internal/external painting/coating applications.</p><p>5) Solid knowledge of applicable international codes and standards.</p><p>- D) QCI Painting Inspector</p><p>1) Diploma / Degree.</p><p>2) Minimum 5 years in these Minimum 3 years overseas experience in QA / QC Painting Inspector works, for Refinery / Petrochemical / Oil &amp; Gas Projects (Storage Tanks, Pressure Vessel, Piping &amp; Structure).</p><p>3) Well experienced in Tank internal / external painting system including GRE coating.</p><p>4) Knowledge in ASTM, ISO, SSPC and NACE</p><p>- E) HSE Officer</p><p>1) Bachelor s degree in Occupational Health &amp; Safety, Environmental Science, Engineering, or related field.</p><p>2) HSE certification (NEBOSH, IOSH, OSHA, etc.) is highly desirable</p><p>3) 3-5 years of experience in a safety role, preferably in the oil and gas / Petrochemical / Refinery industry.</p><p>- F) Senior Planning &amp; Project Control Engineer</p><p>1) Diploma / B. Tech / BE, Mechanical Engineering. PMP Certification.</p><p>2) 15+ years related experience and minimum 8+ years experience in the Planning engineer position with independently preparing project construction plans and schedules with resources schedules (Manpower/Materials/Equipment), control of major EPC Projects in Oil &amp; Gas industry and Fabrication Shop</p><p>3) Capable of preparing Project planning deliverables, Master schedules and Issuance of company procured and Client supply materials.</p><p>4) Progress reporting (External to Clients &amp; Internally to Management) including updating, monitoring and project controls. Responsible for development of Work breakdown Structure, Earned value and performance measurement for each project.</p><p>5) Coordinate between Engineering, Procurement, Suppliers and Construction teams during design and construction phases.</p><p>6) Experience in managing multiple subcontractors with high value subcontracts.</p><p>7) Independently manage planning and project control functions for EPC projects.</p><p>8) Prepare and update baseline schedules using Primavera (P6) or equivalent tools.</p><p>9) Track progress and prepare daily, weekly, and monthly reports.</p><p>10) Conduct delay analysis and propose mitigation plans. Issue cost reports and VOWD reports.</p><p>- G) Permit Holder (Mechanical)</p><p>1) Diploma / Degree in Mechanical Engineering.</p><p>2) (PDO/ OQ valid permit cards preferred)</p><p>- H) Senior HR Executive (Chennai Location)</p><p>1) MBA in Human Resource.</p><p>2) Must be having 2-5 years experience in recruitment for workmen and staff category.</p><p>3) Lead end-to-end recruitment process, attracting the most suitable candidate to support business objectives. (Blue &amp; White Collar)</p><p>4) Collaborate with line managers and division head, to understand manpower needs and ensure a streamlined recruitment experience.</p><p>5) Domestic Travelling required, as per work scope.</p><p>6) Foster positive employee relations by addressing concerns, resolving conflicts, and promoting collaborative work environment.</p><p>7) Coordinate with team to understand the training requirement.</p><p>8) Oversee the performance management process, ensure fair and transparent evaluation.</p><p>9) Work closely with division to set the performance expectation and to provide feedback to the employee.</p><p>10) Manage and administer the monthly payroll and C&amp;B program.</p><p>11) Ensure compliance with relevant labour laws and industry standards.</p><p>12) Devise the compensation schemes and implement to ensure employee motivation.</p><p>13) Develop and update HR policies and procedures, ensuring alignment with legal requirements and best practices.</p><p>14) Stay informed about the changes in labor laws and update organization policies accordingly.</p><p>15) Update the ISO audit related documents.</p><p>16) Collaborate with relevant stakeholders to create a positive and supportive work environment.</p><p>17) Organize orientation for new employees and exit interview.</p><p>18) Organize the camp inspection with the support of Admin, so a better living environment.</p><p>19) Maintain records for each employee.</p><p>20) Establish and maintain medical service providers, ensuring their continuous development.</p><p>21) Evaluate and select insurance policies and vendors.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>1) Diploma / Degree in Mechanical, Chemical, or related engineering discipline.</p><p>2) Minimum 5 years of experience in painting/coating inspection for oil &amp; gas, industrial, or EPCC projects in Oman or the GCC, including workshop / manufacturing environments.</p><p>3) Valid BGAS or NACE Level II Coating Inspector certificate (mandatory).</p><p>4) Hands-on expertise in inspection of piping external, vessel internal/external, and storage tank internal/external painting/coating applications.</p><p>5) Solid knowledge of applicable international codes and standards.</p>

<p>Job Purpose To perform radiographic film interpretation (RTFI) activities for welded joints and fabricated components, ensuring compliance with project specifications, client requirements, and applicable international codes and standards. The role is responsible for identifying welding discontinuities, preparing interpretation reports, and supporting quality assurance activities throughout the fabrication process. Key Responsibilities Interpret radiographic films and digital radiographic images of welds, piping systems, pressure vessels, and structural components. Evaluate radiographs for weld discontinuities including: Porosity Slag Inclusions Lack of Fusion Lack of Penetration Cracks Undercuts Tungsten Inclusions Miscellaneous weld defects Review radiographs against applicable acceptance criteria. Verify film quality, density, sensitivity, and image quality indicators (IQI). Prepare RT film interpretation reports and maintain inspection records. Coordinate with QA/QC Engineers, Welding Inspectors, and Production teams regarding repair and re-inspection requirements. Ensure traceability of welds, radiographic films, and inspection reports. Participate in client and third-party inspections. Maintain RT film storage, indexing, and retrieval systems. Assist in preparing manufacturing record books (MRB) and quality dossiers. Ensure compliance with HSE requirements related to NDT operations. Educational Qualification Diploma or Bachelor's Degree in Mechanical Engineering, Welding Technology, Metallurgy, or a related discipline. Higher Secondary qualification with extensive RT interpretation experience may also be considered. Certification Requirements Valid RT Level II Certification as per: ASNT SNT-TC-1A ISO 9712 PCN Equivalent internationally recognized certification Additional certifications in UT, MT, and PT will be an added advantage. Experience Minimum 5-8 years of experience in NDT and RT Film Interpretation. At least 3 years of experience in Offshore Oil &amp; Gas, Modular Fabrication, Shipyard, EPC, or Heavy Engineering projects. Experience in interpretation of: Structural Steel Welds Piping Welds Pressure Vessels Process Equipment Offshore Modules and Skids Technical Knowledge ASME Section V ASME Section VIII ASME B31.3 AWS D1.1 API Codes as applicable Project Quality Plan (PQP) Inspection &amp; Test Plans (ITP) Offshore fabrication quality requirements Key Skills RT Film Interpretation Weld Defect Evaluation NDT Documentation &amp; Reporting Quality Control Procedures Technical Drawing Interpretation Report Writing Computer Proficiency (MS Office) Team Coordination Competencies Attention to Detail Analytical Thinking Quality Awareness Integrity &amp; Compliance Communication Skills Problem Solving Teamwork Safety Focus Preferred Industry Experience Offshore Modular Fabrication Yards Oil &amp; Gas EPC Projects Shipbuilding &amp; Marine Fabrication Pressure Vessel Manufacturing Process Module Fabrication Structural Steel Fabrication</p><p><strong>Desired Candidate Profile</strong></p><p>Educational Qualification Diploma or Bachelor's Degree in Mechanical Engineering, Welding Technology, Metallurgy, or a related discipline. Higher Secondary qualification with extensive RT interpretation experience may also be considered. Certification Requirements Valid RT Level II Certification as per: ASNT SNT-TC-1A ISO 9712 PCN Equivalent internationally recognized certification Additional certifications in UT, MT, and PT will be an added advantage. Experience Minimum 5-8 years of experience in NDT and RT Film Interpretation. At least 3 years of experience in Offshore Oil &amp; Gas, Modular Fabrication, Shipyard, EPC, or Heavy Engineering projects. Experience in interpretation of: Structural Steel Welds Piping Welds Pressure Vessels Process Equipment Offshore Modules and Skids Technical Knowledge ASME Section V ASME Section VIII ASME B31.3 AWS D1.1 API Codes as applicable Project Quality Plan (PQP) Inspection &amp; Test Plans (ITP) Offshore fabrication quality requirements Key Skills RT Film Interpretation Weld Defect Evaluation NDT Documentation &amp; Reporting Quality Control Procedures Technical Drawing Interpretation Report Writing Computer Proficiency (MS Office) Team Coordination Competencies Attention to Detail Analytical Thinking Quality Awareness Integrity &amp; Compliance Communication Skills Problem Solving Teamwork Safety Focus Preferred Industry Experience Offshore Modular Fabrication Yards Oil &amp; Gas EPC Projects Shipbuilding &amp; Marine Fabrication Pressure Vessel Manufacturing Process Module Fabrication Structural Steel Fabrication</p>

<p> <strong> </strong> </p> <p><strong style="font-size: 11px;">Hr.omc@omanmethanol.com</strong></p> <p> </p> <p> </p> <p> <strong>Job Vacancy Mechanical Engineer</strong> </p> <p>We are seeking a qualified Mechanical Engineer with not less than 3 years of experience in refineries, oil &amp; gas, or methanol plants.</p> <p>The candidate must hold a Mechanical Engineering degree with strong knowledge in pumps, compressors, turbines, and preventive maintenance.</p> <p>Excellent communication and teamwork skills are required.</p> <p><br></p> <p> </p> <p> </p> <p> </p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>JOB PURPOSE: To carrying out welding, fitting, and grinding activities in the shipyard and for new building, repair, and conversion projects, as well as steel structure fabrication works. The role ensures that all metal components, plates, and structural parts are joined accurately and securely in accordance with approved drawings, technical specifications, and measurement requirements. The Welder must comply with established quality control procedures and health, safety, and environmental (HSE) regulations within ADC, ensuring that all work is completed safely, efficiently, and within the assigned project timelines KEY ACCOUNTABILITIES: Follow the daily welding chart specifications for metal sheets of PS repair/ conversion or new development laid out by the PS Supervisor in order to ensure the welding work complies with the specifications provided by the PS Engineer and the activities are completed as per timelines, quality, health and safety standards of ADC. Other jobs which will be assigned at the discretion of the Line Manager shall be attended too. Welding/ Fitting Activities Lay out, position, align, and secure parts and assemblies prior to welding, using straightedges, combination squares, callipers, and rulers in order to ensure the welding activities are accurate and as per the requirements and specifications. Weld/ Fit components in flat, vertical, or overhead positions by igniting torches or starting power supplies and striking arcs by touching electrodes to metals such as aluminium, stainless steel and cast iron being welded, completing the electrical circuits to facilitate the joining of the multiple work pieces together and to ensure compliance with health and safety standards of ADC. Welding/ Fitting Equipment Operations Recognize, set up and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment in order to ensure safety and well-being of the workers working in that environment. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals in order to ensure that there is minimum wastage of materials and its effective utilisation. Welding/ Fitting Conditions Connect and turn regulator valves in order to activate and adjust gas flow and pressure so that desired flames are obtained for conducting welding/ fitting activities. Monitoring Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications. Quality Control Ensure adherence to and maintenance of the quality of welding/ fitting activities in order to enable the successful welding and formation of the hull as per specifications. Material Requirements and Use Coordinate with the PS Supervisor if and when required in order to ensure that materials/ equipment/ spare part requirements are provided timely and accurately to complete job requirements. Maintain the stock of consumables and spares to enable proactive replenishment of raw materials/ equipment has/ spare parts required for welding/ fitting activities. Preparing Reports Prepare daily reports on progress, heating time, temperatures, equipment s used etc. for welding/ fitting activities in the PS department in order to keep the PS Foreman aware of the progress and ensure the work is completed as per the schedule. Policies, Systems, Processes &amp; Procedures Follow all relevant PS departmental policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner. Quality, Health, Safety, &amp; Environment Ensure compliance to all relevant quality, health, safety and environmental management policies, procedures and controls across the department to guarantee employee safety, delivery of high quality products/ service and a responsible environmental attitude.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School graduate or equivalent</li><li>3G and over welding qualification by Classification Society (FCAW- Flux-cored Arc Welding) with preferably other welding qualifications (SAW- Submerged Arc Welding, EGW Electro gas Welding, etc.) as well</li><li>1 years of relevant experience in welding/ fitting activities in a shipyard or similar work</li><li>Understanding of general drawing Skills of hull fitting, welding and grinding.</li><li>Communication and interpersonal skills</li></ul><p></p></section>

<p><h4>Job Description</h4> <p>A leading medical device company is actively recruiting a senior service engineer for their Oman office.</p> <p>Applicants must have proven work experience in the country where the role is based. Candidates who have relocated within the last 12 months will not be considered.</p> <p>Please note that you must meet all the criteria set out below for your application to be considered. Suitable candidates will be contacted within 5 working days. If you are not contacted by us within that time, please consider your application unsuccessful on this occasion.</p> <h4>Main responsibilities include but are not limited to:</h4> <ul> <li>Install, maintain and troubleshoot medical equipment at customer sites.</li> <li>Lead technical support activities across an assigned territory.</li> <li>Resolve technical issues and customer complaints efficiently.</li> <li>Support service revenue through service agreements, preventive maintenance and spare parts.</li> <li>Coordinate installations, training and service resources.</li> <li>Maintain technical documentation, tools and spare parts inventory.</li> <li>Ensure equipment and tools are maintained and calibrated.</li> <li>Mentor and support service engineers with technical repairs and maintenance.</li> <li>Monitor service performance and support the achievement of service targets.</li> </ul> <h4>To be successful you will need to meet the following:</h4> <ul> <li>Omani nationals preferred.</li> <li>Degree in biomedical, electronics, electrical, mechanical engineering, IT or a related field.</li> <li>Minimum 5 years’ field service experience within medical devices, healthcare or life sciences.</li> <li>Willingness to travel as needed for on-site customer support.</li> <li>Driver’s license required.</li> <li>Excellent Arabic and English is a must.</li> <li>Applicants should be available for face-to-face interviews in the location mentioned above.</li> </ul></p><p></p>

<p>Optimize the machine settings to ensure that the highest quality is produced at the maximum output. Carry out product changeover and strictly adhere to the process specification sheets for each product. Record all machine settings as required and carry out a shift turnover to the incoming operators. Follow the Daily Production Schedule as prepared by the Production Planner. Troubleshoot sheet faults. Report any damage or misuse of equipment and will always ensure that the equipment is operated in a safe manner. Ensure that the equipment is run with all machine guards in working order and fully functional at all times.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in Mechanical Engineering</li><li>Prefer who have experience in Petrochemical / PET sheet/resin plant.</li><li>English language ability required</li><li>Priority to the Dhofar Region.</li></ul><p>Note: Those jobs are under MoL wage support.</p>

<p><h4>Principal accountabilities</h4> <p>The power gen mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with maintenance action sheets, technical orders, manuals, checklists, regulations, maintenance action sheets and unit type code (UTC) configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with maintenance action sheets, Air Force technical orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of bare base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including work orders, USAF supply and Amentum forms and updates Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs temporary duty (TDY) in the area of operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense agencies contingency systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense agencies contingency systems preferred but not required.</li> </ul></p><p></p>

<p><h4>Principal accountabilities</h4> <p>The power gen mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).</p> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with maintenance action sheets, technical orders, manuals, checklists, regulations, maintenance action sheets and unit type code (UTC) configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with maintenance action sheets, Air Force technical orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of bare base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including work orders, USAF supply and Amentum forms and updates Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs temporary duty (TDY) in the area of operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense agencies contingency systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense agencies contingency systems preferred but not required.</li> </ul></p><p></p>

<p>Participate in mechanical completion inspections, system walk-downs and punch-list identification/closure. Verify equipment and piping installation against approved P&amp;IDs and operating requirements. Support flushing, blowing, hydrotesting, gas leak testing, line checking and equipment functional testing. Participate in commissioning and start-up of gas circuits, process equipment, CO removal systems and associated utilities. Perform field line-ups and equipment preparation for plant start-up, shutdown and maintenance. Operate and inspect field equipment including valves, pumps, compressors, heaters, material-handling systems and associated auxiliaries. Monitor field conditions for abnormal temperature, pressure, vibration, leakage, noise or equipment behaviour. Coordinate field actions with the Panel Operator and Shift In-Charge. Guide and supervise Field Operators during routine and non-routine operational activities. Support equipment isolation and de-isolation under approved PTW and LOTO procedures. Respond effectively to gas leaks, trips, equipment failures and other operational emergencies. Maintain accurate field logs and report abnormalities promptly. Ensure safe handling of natural gas, reducing gases, hydrogen-rich gas and carbon monoxide environments. Contribute to improving operating procedures and field checklists based on commissioning and operating experience.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical/Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 5 years' experience for degree holders or 8 years for diploma holders.</li><li>Minimum 2 years as a Senior Field Operator or equivalent.</li><li>Hands-on experience in Tenova HYL/Energiron or Midrex DRI operations.</li><li>Experience in commissioning/start-up of a DRI plant will be a strong advantage.</li><li>Good knowledge of process gas systems, CO removal, PGH, natural-gas systems and plant utilities.</li><li>Strong understanding of PTW, LOTO and gas-safety practices.</li></ul>

<p><h4>Job Description</h4> <p>The Power Gen Mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with Maintenance Action Sheets, Air Force Technical Orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of Bare Base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including Work Orders, USAF Supply and Amentum forms and update Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs Temporary Duty (TDY) in the Area of Operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense Agencies Contingency Systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred but not required.</li> </ul></p><p></p>

<p>Job is on Oman</p><p>To lead and execute the preparation of accurate cost estimates and tender submissions for utilities, infrastructure, and civil projects and to ensure all estimates are based on complete and verified technical and commercial data. To coordinate with engineering, procurement, and project teams to develop competitive and compliant proposals and to support management in pricing strategies and value engineering to secure new business opportunities.</p><p>Operational</p><p>Review tender documents, drawings, specifications, and bill of quantities (BOQ) to identify scope, requirements, and risks. Prepare detailed cost estimates, including materials, labor, equipment, and subcontractor costs. Coordinate with procurement for material quotations and supplier comparisons. Liaise with subcontractors to obtain competitive prices and technical compliance. Evaluate technical addenda, clarifications, and pre-bid queries to ensure full understanding of tender requirements. Support the preparation of tender summaries, cost breakdowns, and commercial evaluations. Ensure all estimates comply with company policies, project specifications, and client requirements.</p><p>Value Engineering &amp; Cost Optimization</p><p>Identify cost-saving alternatives and innovative construction methods to improve competitiveness. Review and optimize resource allocation, productivity norms, and material selections. Contribute to the development of pricing strategies for major bids.</p><p>Coordination &amp; Documentation</p><p>Collaborate with engineering, planning, and project teams for technical input and constructability reviews. Maintain an organized database of rates, cost information, and historical project data. Ensure proper documentation and filing of tender submissions and correspondence.</p><p>Management &amp; Leadership</p><p>Guide and review the work of junior estimators, ensuring accuracy and consistency. Participate in tender review meetings, bid evaluations, and management presentations. Support post-tender clarifications, negotiations, and contract finalization as required.</p><p>Health, Safety, Environment &amp; Quality Aware of HSE company policy.</p><p>1. KEY PERFORMANCE INDICATORS (KPIs)</p><p>Accuracy and completeness of cost estimates and tender submissions. Number of tenders delivered on time and in compliance with client requirements. Success rate of bids and tenders submitted. Effectiveness in cost optimization and value engineering initiatives. Quality of coordination and communication with internal and external stakeholders.</p><p>2. QUALIFICATIONS, EXPERIENCE &amp; SKILLS</p><p>Bachelor s degree in civil, Mechanical, or Electrical Engineering. Minimum 8 12 years of experience in estimation and tendering within utilities, infrastructure, or heavy civil projects. Strong knowledge of estimation software, pricing methodologies, and market rate analysis. Proficiency in MS Excel, AutoCAD, and Primavera (for BOQ/time correlation). Excellent analytical, numerical, and negotiation skills. Strong attention to detail and ability to work under tight deadlines. Familiarity with Omani construction market, cost structures, and local suppliers/subcontractors.</p><p>3. RELATIONSHIPS</p><p>Internal: Estimation Lead / Commercial Manager. Coordinate with Engineering, Planning, Procurement, and Project Teams. Supervise Junior Estimators. External: Liaise with clients, consultants, subcontractors, and suppliers for tender-related clarifications and quotations. Engage with government and private entities for prequalification and bidding opportunities.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in civil, Mechanical, or Electrical Engineering.</li><li>Minimum 8-12 years of experience in estimation and tendering within utilities, infrastructure, or heavy civil projects.</li><li>Strong knowledge of estimation software, pricing methodologies, and market rate analysis.</li><li>Proficiency in MS Excel, AutoCAD, and Primavera (for BOQ/time correlation).</li><li>Excellent analytical, numerical, and negotiation skills.</li><li>Strong attention to detail and ability to work under tight deadlines.</li><li>Familiarity with Omani construction market, cost structures, and local suppliers/subcontractors.</li></ul>

<p>Require Mechanical Maintenance Engineer for Cement Plant at Oman. Candidates must require experience in Cement Company as a Maintenance Engineer.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must require experience in Cement Company as a Maintenance Engineer.</p>

<p><h4>Job Description</h4> <p>The Power Gen Mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with Maintenance Action Sheets, Air Force Technical Orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of Bare Base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including Work Orders, USAF Supply and Amentum forms and update Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs Temporary Duty (TDY) in the Area of Operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense Agencies Contingency Systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred but not required.</li> </ul></p><p></p>

<p>The role of a Junior Electrical Site Engineer / Mechanical Site Engineer involves overseeing and managing electrical and mechanical aspects of construction projects. Responsibilities include ensuring that installations comply with design specifications, safety standards, and project timelines. The position requires a proactive approach to problem-solving on-site and effective communication with project teams and contractors.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor Degree in Electrical engineering or equivalent</p><p>4-8 years of experience</p><p>Working on residential projects experience is an asset</p><p>Technical office background is an asset</p>

<p>Conduct routine plant rounds and inspect assigned process areas. Support system walk-downs, punch-list clearance and mechanical completion activities. Participate in flushing, blowing, loop checking, leak testing and functional testing during commissioning. Perform equipment and process line-ups according to approved operating procedures. Operate field equipment associated with the reduction shaft/reactor, process gas circuit, Process Gas Heater and material-handling systems. Start and stop pumps, fans and other auxiliaries as instructed by the control room. Monitor equipment for leaks, unusual vibration, noise, temperature or other abnormalities. Read local gauges and instruments and communicate field readings to the Panel Operator. Assist during plant start-up, stabilization and shutdown activities. Support equipment isolation and reinstatement in coordination with operations and maintenance. Maintain field logbooks and operating checklists. Follow strict safety precautions when working around natural gas, hydrogen-rich reducing gas and carbon monoxide. Immediately report unsafe conditions, gas leaks, equipment abnormalities and process deviations. Maintain good housekeeping and operational discipline throughout assigned areas.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Science or Diploma in Chemical Engineering or equivalent.</li><li>Minimum 1 year of relevant experience for degree holders or 4 years for diploma holders.</li><li>At least 1 year as a Shift Field Operator in an industrial process plant.</li><li>Experience in HYL/Energiron DRI, Midrex DRI, fertilizer, petrochemical or similar gas-based process plants is preferred.</li><li>Basic understanding of DRI processes, PGH, natural-gas handling and water-treatment systems.</li><li>Ability to understand P&amp;IDs, equipment identification and operating procedures.</li><li>Knowledge of industrial safety, PTW and LOTO practices.</li></ul>

<p><strong>Position Title:</strong> Mechanical Engineer</p><p><strong>Location</strong>: GCC (Project-Based)</p><p><strong>Availability</strong>: Immediate joiners preferred (candidates from India or home country are also welcome)</p><p><br></p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Execute Mechanical works at site for hotel and commercial building projects.</p></li><li><p>Ensure project activities are carried out as per approved drawings, specifications, and timelines.</p></li><li><p>Coordinate with contractors, subcontractors, and other stakeholders for smooth execution.</p></li><li><p>Monitor daily site activities and ensure quality, safety, and compliance standards are maintained.</p></li><li><p>Prepare site reports, progress updates, and documentation.</p></li><li><p>Identify and resolve technical issues during project execution.</p></li></ul><p><br></p><p><strong>Requirements:</strong></p><ul><li><p><strong>Experience:</strong> 8 to 11 years in MEP site execution.</p></li><li><p><strong>Project Background:</strong> Must have experience in hotel or commercial building projects only.<br><em>(Candidates with infrastructure, oil & gas, or energy project experience will not be considered.)</em></p></li><li><p><strong>Role Experience:</strong> Must be working as a Site Execution Engineer.<br><em>(Candidates from maintenance or commissioning backgrounds are not suitable.)</em></p></li><li><p><strong>Location Experience:</strong> Mandatory GCC experience.</p></li><li><p><strong>Education:</strong> Bachelor’s Degree or Diploma in Mechanical/Electrical Engineering.</p></li><li><p><strong>Availability:</strong> Must be immediately available to join.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>-</p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> Keeps airplane in safe working condition by servicing engines, engine components, and airframe components. Perform routine troubleshooting, installation, repair and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance. Responsible for all maintenance performed on the assigned aircraft.</p> <h4>Job description:</h4> <ul> <li>This includes but is not limited to major maintenance such as landing gear replacement, flight control replacement and accomplish periodical inspections.</li> <li>Maintains tactical aircraft, support equipment, and forms and records. Performs and supervises flight chief, expediter, crew chief, repair and reclamation, quality assurance, and maintenance support functions.</li> <li>Services aircraft. Performs end-of-runway, postflight, preflight, thru-flight, and phase inspections. Performs integrated combat turns and hot pit refuels.</li> <li>Provide for the launch, recovery, and preflight, thru flight, BPO inspections, ground handling, minor maintenance, and servicing.</li> <li>Advises on problems maintaining, servicing, and inspecting aircraft and related aerospace equipment.</li> <li>Uses technical data to diagnose and solve maintenance problems on aircraft systems.</li> <li>Interprets and advises on maintenance procedures and policies to repair aircraft and related equipment.</li> <li>Troubleshoot and maintain aircraft structures, systems, components, and related equipment. Removes and installs aircraft components.</li> <li>Conducts functional tests of repaired components and systems. Adjusts, aligns, and rigs aircraft systems.</li> <li>Supervises and performs aircraft jacking, lifting, and towing operations.</li> <li>Inspects aircraft structures, systems, components, and related systems.</li> <li>Supervises and performs aircraft and component inspections.</li> <li>Interprets inspection findings and determines adequacy of corrective actions.</li> <li>Inspects and checks components for clearances, tolerances, proper installation, and operation.</li> <li>Inspects and operates powered and nonpowered aerospace ground equipment.</li> <li>Inspects and identifies aircraft corrosion for prevention and repair.</li> <li>Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.</li> <li>Inventories and maintains aircraft equipment.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Minimum of 3-5 years' experience on like aircraft.</li> <li>High school graduate or GED with a certificate of completion.</li> <li>Experience in all aspects of intermediate level maintenance on F-16 Block 50 aircraft.</li> <li>Experience in phase inspections and all aspects of scheduled maintenance.</li> <li>Experience in inspection and troubleshooting of any systems failures.</li> <li>Experience providing on-the-job training to technicians.</li> <li>Experience with landing gear overhaul, inspection, and operational checks.</li> </ul> <h4>Clearance requirements:</h4> <p>Must be able to obtain and maintain facility credentials and authorization. US citizenship is required for facility credentials and authorization to work at this facility.</p> <h4>Physical requirements / working environment:</h4> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and cuts and bruises from using tools in close proximity and hazards of moving vehicles such as forklifts in shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>General Responsibility</strong></p><br><p>&nbsp;1. Be actively involved in building teamwork and enhancing the team’s commitment to their work and the hotel.&nbsp;</p><br><p>2. Understand the hotel’s vision and brand personality and ensure it is integrated in your daily work practices.&nbsp;</p><br><p>3. Actively and successfully train people to work according to hotel’s standards&nbsp;</p><br><p>4. Recognize outstanding individual performance in your team and deal with substandard performance fairly, immediately and constructively</p><br><p>&nbsp;5. Ensure all employees under your supervision are scheduled in accordance with business needs</p><br><p>&nbsp;6. Participate in departmental and hotel problem solving teams during weekly and monthly core meetings</p><br><p>&nbsp;7. Communicate in a friendly, tactful and professional manner with guest, suppliers as well as colleagues</p><br><p>&nbsp;8. Be informed and keep your supervisor informed of all matters that may affect your work, the hotel’s service or reputation&nbsp;</p><br><p>9. Always present a clean and tidy appearance in accordance with the hotel’s grooming standards&nbsp;</p><br><p>10. Be flexible and open to change in your job responsibilities, work area and/or roster to meet business needs</p><br><p>&nbsp;11. Be understanding, supportive, encouraging and helpful to guests as well as suppliers and your colleagues</p><br><p>&nbsp;12. Care about your work environment, Green globe program and make sure it is tidy and well maintained</p><br><p>&nbsp;13. Be reliable and ensure you are at work on time&nbsp;</p><br><p>14. Know your role in case of emergency such as bomb threat, flood, fire etc&nbsp;</p><br><p>15. Understand the Employee Handbook and comply with the standards it outlines&nbsp;</p><br><p>16. Carry out all professionally reasonable instructions given by your supervisor&nbsp;</p><br><p>17. Supervise and participate in the maintenance, repair, installation and operation of steam, water, sewer, air and gas utilities and equipment as well as laundry, kitchen, heating plant, air conditioning and ventilation systems; supervisee and participate in the maintenance and repair of trucks, lawnmowers, automotive and power drive equipment&nbsp;</p><br><p>18. Monitor and supervise the work of contractors performing services on utility projects&nbsp;</p><br><p>19. Supervise and perform metals parts machining and processing utilizing power driven equipment such as lathes, milling machines, shapers and drill presses&nbsp;</p><br><p>20. Supervise and participate in metal fabrication and repair work involving the use of welding equipment; review drawings and/or sketches and determine methods fro performing requested work&nbsp;</p><br><p>21. Plan and schedule work for the group ensuring proper distribution of assignments and adequate staffing, space and facilities for subsequent performance of duties&nbsp;</p><br><p>22. Assist in development and implementation of preventive maintenance programs for mechanical equipment and facilities</p><br><p>&nbsp;23. Prepare reports and analyses setting forth progress, adverse trends and appropriate recommendations and/or conclusions&nbsp;</p><br><p>24. Train and instruct new team member in department.&nbsp;</p><br><p>25. Recommend various personnel actions including, but not limited to hiring, performance appraisals, promotions, transfers and vacation schedules&nbsp;</p><br><p>26. Estimate time, cost and amount and type of lumber and supplies required for projects; requisition lumber and supplies required&nbsp;</p><br><p>27. Inspect completed work to ensure compliance with blueprints, specifications, instructions and applicable federal, state and local order; direct any rework or modification&nbsp;</p><br><p>28. Conduct periodic inspections of the hotel buildings and facilities to determine repair needs; establish and coordinate programs of preventive maintenance</p><br><p>&nbsp;29. Successfully develops and implements short term and small-scale projects. Accurately estimates and request resources required to successfully achieving goals&nbsp;</p><br><p>30. Consistently sets high standards of quality. Team members demonstrate commitment to provide quality service, establishes and monitors procedures designed to measure quality, and recommend improvements based on experience and feedback obtained&nbsp;</p><br><p>31. Report any unusual finding or safety hazards immediately to the Chief Engineering</p><br><p>&nbsp;32. Successfully complete Training Certification Process and review all department safety information (i.e. JHA’s and MSDS’s), practice emergency procedures in compliance with standards. Reacts and assist in hotel emergency situation if necessary 33. Understand and practice hotel emergency fire procedures</p><br><p>&nbsp;34. Perform all other engineering related duties assigned by the Chief Engineer. Offer lateral service to internal/external customer when available&nbsp;</p><br><p>35. Learn, understand and energize Alila Villa Uluwatu Standard&nbsp;</p><br><p><strong>Technical Expertise</strong>&nbsp;</p><br><p>1. Collect and distributes works order to the appropriate section and ensure that his subordinates on shift duty are proficient to carry out their daily routines of operation&nbsp;</p><br><p>2. To complete all work orders, receive during his shift if possible and ensure that unfinished orders are properly handed over to the following shift for completion</p><br><p>&nbsp;3. At regular intervals, inspects and logs the working condition of equipment, machinery and engineering systems&nbsp;</p><br><p>4. In the event of any sign of abnormality or breakdown of engineering systems, he must cease the operation of that equipment and run the standby system, then inform his superiors of his action</p><br><p>&nbsp;5. Monitor and records utility consumption and assist the Assistant Chief Engineer to maintain efficiency&nbsp;</p><br><p>6. Trains and direct his subordinate in the correct operation of the equipment and machinery in his control&nbsp;</p><br><p>7. Trains and direct his subordinates in the correct operation of all emergency equipment i.e. fire protection panel and emergency generation equipment&nbsp;</p><br><p>8. To pass on his experience and skill to his subordinates in order to achieve a highly skilled and motivated team&nbsp;</p><br><p>9. To observe and practice safe working methods&nbsp;</p><br><p>10. To participate in the Hotel Emergency Team/Fire Brigade&nbsp;</p><br><p>11. To attend Life Safety instruction classes and any other Hotel training schemes</p><br><p>&nbsp;<strong>Environment Sustainability Responsibilities</strong>&nbsp;</p><br><p>1. Comply health, safety, security policies of the hotel&nbsp;</p><br><p>2. Having knowledge and ability to support environment friendly operational approach&nbsp;</p><br><p>3. Having knowledge and ability to implement Earth Check principles in his/her scope</p><br><br><b>Qualifications:</b><br><ul><li><span><span>At least 2 years of supervisory experience</span></span></li><li><span>Diploma or technical qualification in Engineering, Electrical, Mechanical, HVAC, or a related technical field.</span></li><li><span>Previous experience in Engineering or Maintenance within the hospitality industry or a similar environment.</span></li><li><span>Previous supervisory or team-leading experience is preferred.</span></li><li><span>Good knowledge of hotel building systems, preventive maintenance, and general maintenance practices.</span></li><li><span>Understanding of health, safety, and engineering standards and procedures.</span></li><li><span>Ability to diagnose technical issues and coordinate appropriate corrective action.</span></li><li><p><span>Ability to work flexible hours, including weekends, holidays, and shifts, as required by hotel operation</span></p><br></li></ul> </div>

<p>Greeting From TQcert (Tata Projects) ! We Have Requirement With Our Reputed Client.</p><p>Position: Welding Engineers Location: Sohar - Oman Benefits: Salary + FAT + Other benefits.</p><p>Key Responsibilities</p><ul><li>Develop, review, and approve Welding Procedure Specifications (WPS) , Procedure Qualification Records (PQR) , and Welder Qualification Records (WQTR/WPQ) .</li><li>Monitor and control welding activities to ensure compliance with project specifications, codes, and standards (ASME, AWS, API, ISO, EN, etc.).</li><li>Provide technical support and guidance to welders, supervisors, inspectors, and project teams.</li><li>Evaluate welding techniques, materials, consumables, and equipment for suitability and efficiency.</li><li>Investigate welding defects, failures, and non-conformities and implement corrective actions.</li><li>Coordinate with Quality Control (QC), Non-Destructive Testing (NDT), and production teams.</li><li>Review engineering drawings, material specifications, and fabrication requirements.</li><li>Ensure proper implementation of welding procedures and heat treatment requirements.</li><li>Conduct welding procedure qualification tests and welder performance qualification tests.</li><li>Monitor productivity, welding parameters, consumable usage, and project schedules.</li><li>Ensure compliance with safety regulations and environmental requirements.</li><li>Prepare technical reports, welding documentation, and inspection records.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Mechanical Engineering , Welding Engineering , Metallurgical Engineering, or Diploma.</li><li>Professional certifications such as: AWS Certified Welding Inspector (CWI) (preferred) International Welding Engineer (IWE) (preferred) CSWIP 3.1/3.2 (advantageous)</li><li>5-10+ years of experience in welding engineering, fabrication, construction, or oil &amp; gas projects.</li><li>Experience in pressure vessels, pipelines, structural steel, tanks, or process piping projects.</li><li>Familiarity with EPC projects and quality management systems.</li></ul>