Food industries engineer Jobs

<p>Job Purpose</p> <p>(The primary reasons for which the job exists in the company)</p> <p> Lead and supervise all plant operations during the assigned shift.</p> <p> Ensure the safe, reliable, and efficient operation of the facility in compliance with HSE policies and operating procedures.</p> <p> Optimize plant performance, availability, and reliability while meeting production targets.</p> <p> Coordinate operational and maintenance activities to ensure safe and effective execution of work.</p> <p> Make timely operational decisions and respond effectively to abnormal and emergency situations.</p> <p> Manage and develop shift personnel by providing leadership, guidance, and technical support.</p> <p> Ensure accurate and comprehensive shift handovers, including the communication of plant status, ongoing work, operational risks, and outstanding actions to the incoming shift.</p> <p> Ensure compliance with statutory, environmental, and company requirements while achieving the objectives of the Operations Department.</p> <p> </p> <p>Description Key Result Areas</p> <p>Description</p> <p> </p> <p>Safety at Work</p> <p> Has overall responsibility for the safe, reliable, and efficient operation of the plant during the assigned shift.</p> <p> Demonstrates leadership in Health, Safety, and Environment (HSE) by promoting safety as a core value and ensuring compliance with all HSE policies, procedures, and statutory requirements.</p> <p> Ensures plant operations are conducted in accordance with approved operating procedures, safety rules, and operational limits.</p> <p> Leads the shift team in responding effectively to normal, abnormal, and emergency operating conditions, including plant trips, blackouts, and black-start activities where applicable.</p> <p> Coordinates operational and maintenance activities to ensure work is performed safely, efficiently, and in compliance with the Permit-to-Work (PTW) system.</p> <p> Reviews, authorizes, and ensures proper equipment isolations, lockout/tagout requirements, and safety precautions before issuing or accepting permits for maintenance activities.</p> <p> Ensures operational targets and contractual performance requirements are achieved while maintaining plant availability, reliability, and efficiency.</p> <p> Conducts regular plant inspections and safety observations to identify hazards, verify equipment condition, and ensure compliance with operational standards.</p> <p> Ensures timely reporting, investigation, and follow-up of safety incidents, near misses, equipment failures, and operational abnormalities, including implementation of corrective and preventive actions.</p> <p> Maintains accurate operational records, shift logs, and reports, ensuring effective communication during shift handovers and with plant management.</p> <p> Adheres to the Crisis Management Plan and leads the shift team in implementing emergency response procedures when required.</p> <p> Maintains the confidentiality of operational, technical, and commercial information related to the facility.</p> <p> </p> <p>Team Leadership</p> <p> Leads the Operations Team to achieve a high level of performance, efficiency, and operational excellence.</p> <p> Builds and sustains a committed, cohesive, and high-performing team through effective leadership and collaboration.</p> <p> Acts as a mentor and coach, providing guidance and technical support to team members.</p> <p> Leads by example by demonstrating professionalism, accountability, and adherence to company values and standards.</p> <p> Identifies and recommends appropriate training and development programs to enhance the competency of the Operations Team.</p> <p> Plans, prepares, and delivers operations-related training, coaching, and knowledge-sharing sessions to support continuous improvement and workforce development.</p> <p> </p> <p>PROBLEM SOLVING:</p> <p> The Shift-in-Charge Engineer is responsible for resolving technical and operational problems through a thorough understanding of plant processes and systems.</p> <p> Utilizes control system data, historical trends, operational experience, and engineering principles to troubleshoot equipment and process abnormalities.</p> <p> Conducts or facilitates Root Cause Failure Analysis (RCFA) to identify the underlying causes of incidents and equipment failures and implements appropriate corrective and preventive actions.</p> <p> Ensures that lessons learned, findings, and recommended actions are effectively communicated to shift personnel and other operating teams to prevent recurrence and promote continuous improvement.</p> <p> </p> <p>JOB CONTEXT:</p> <p>The Shift-in-Charge Engineer is responsible for, but not limited to, the following duties:</p> <p> Works at Manah Power Plant from the Central Control Room under the supervision of the Operations Superintendent and conducts regular plant rounds as required to effectively perform assigned duties.</p> <p> Leads and supervises shift personnel to ensure the plant is operated safely, efficiently, and within all environmental, technical, and contractual requirements.</p> <p> Ensures comprehensive and accurate shift handovers by communicating plant status, ongoing activities, operational risks, and outstanding actions to the incoming shift.</p> <p> Prepares, reviews, and submits all required operational reports, including but not limited to:</p> <p>o Spot Market Reports</p> <p>o Daily Operating Readings Reports</p> <p>o Night Log and Shift Summary Reports</p> <p>o Trip and Outage Incident Reports</p> <p>and distributes them to the relevant stakeholders in a timely manner.</p> <p> Maintains effective decision-making and leadership during technical, operational, and personnel-related challenges, ensuring safe and stable plant operation under pressure.</p> <p> Coordinates with the Load Dispatch Centre (LDC) for plant start-ups, shutdowns, load changes, and planned or forced outages in accordance with grid and contractual requirements.</p> <p> Supports cross-functional training and development across different operational areas as required by Management, enhancing workforce flexibility and effective utilization of resources.</p> <p> Performs any other duties and responsibilities assigned by the Line Manager that are consistent with the role, whether or not specifically stated in this job description.</p> <p> </p> <p><br></p> <p> </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><span><strong>PRIMARY RESPOSIBLITY</strong></span></span></p><br><p><span><span>Lead a team(s) of Materials Corrosion Engineers to carry out the materials activities to generate relevant&nbsp;deliverables on time, meeting QMS requirement according to Client requirements.&nbsp;</span></span></p><br><p><span><span>Able to handle efficiently multiple projects Ensure design integrity and deliverables quality for all areas&nbsp;&nbsp;within a project with special emphasis on interfaces.&nbsp;&nbsp;</span></span></p><br><p><span><span>Ability to develop CTR based on scope of work and provide input to finalize the project execution&nbsp;&nbsp;schedule.&nbsp;</span></span></p><br><p><span><span>Manage work assignments, workload, work forecasting for assigned projects.&nbsp;</span></span></p><br><p><span><span>Participate in HAZID, Design Reviews, HAZOP’s, IPF Classifications, HSE related Workshops.&nbsp;&nbsp;Implement/practice/monitor Quality Management System in assigned projects in line with ISO 9001&nbsp;&nbsp;Ensure seamless handover of deliverables to project teams.&nbsp;</span></span></p><br><p><span><span>Manage and control all interfaces of the related discipline with other discipline and design product&nbsp;&nbsp;suppliers.&nbsp;</span></span></p><br><p><span><span>Liaison with vendors, contractor, and other Client personnel to satisfy the various aspects of the project.&nbsp;&nbsp;Preparation of requisitions and technical evaluation of subsequent bids for discipline material and equipment purchases and SACP and ICCP Cathodic Protection Systems.&nbsp;</span></span></p><br><p><span><span>Ensure designs are executed in line with International / Client / Company specifications, standards, and procedures.&nbsp;</span></span></p><br><p><span><span>To provide feedback on improvement to the applicable design standards</span></span></p><br><p><span><span><strong>SPECIFIC REQUIREMENT</strong></span></span></p><br><p><span><span>Demonstrated experience in Materials Selection (Concept / FEED / Detailed Design).&nbsp;</span></span></p><br><p><span><span>Demonstrated experience in corrosion analysis and implementing corrosion management programs.&nbsp;&nbsp;Demonstrated experience in validation of corrosion control, IOW, corrosion loops and damage mechanisms.&nbsp;</span></span></p><br><p><span><span>Demonstrated experience in cathodic protection Specification, Design, and Installation.&nbsp;&nbsp;</span></span><span><span>Demonstrated experience in conducting Risk Based Inspection.&nbsp;</span></span></p><br><p><span><span>Demonstrated experience in Painting and Coatings Specification&nbsp;</span></span></p><br><p><span><span>Shall have experience in all ranges of metallic and non-metallic materials.&nbsp;</span></span></p><br><p><span><span>Lead the material selection and corrosion control strategy for onshore oil and gas projects.&nbsp;&nbsp;</span></span></p><br><p><span><span>Conduct technical reviews of project specifications, designs, and engineering deliverables to ensure alignment with project requirements.&nbsp;</span></span></p><br><p><span><span>Identify, evaluate, and recommend materials suitable for various operating environments, considering factors like temperature, pressure, and corrosive media.&nbsp;</span></span></p><br><p><span><span>Develop and implement corrosion protection systems, including coatings, cathodic protection, and chemical treatment solutions.&nbsp;</span></span></p><br><p><span><span>Supervise and guide a multidisciplinary engineering team to meet project objectives and deadlines.&nbsp;&nbsp;Coordinate with project stakeholders, to ensure compliance with regulatory requirements and industry&nbsp;&nbsp;best practices.&nbsp;</span></span></p><br><p><span><span>Monitor project progress and ensure technical accuracy, cost control, and adherence to schedules.&nbsp;&nbsp;Perform detailed failure analysis, risk assessments, and life-cycle evaluations for materials and equipment.&nbsp;</span></span></p><br><p><span><span>Prepare and deliver comprehensive technical reports, specifications, and presentations to internal and external stakeholders.&nbsp;</span></span></p><br><p><span><span>Provide expertise in corrosion monitoring techniques and ensure implementation during project phases.&nbsp;Ensure all engineering activities comply, standards, and quality assurance procedures.&nbsp;</span></span></p><br><p><span><span>Support internal and external audits and address any findings related to materials and corrosion management.&nbsp;</span></span></p><br><p><span><span>Train and mentor junior engineers to build technical capabilities within the team.</span></span></p><br> <p><span><span><strong>Education, Qualification &amp; Experience:</strong></span></span></p><br><p><span><span>Degree in relevant engineering subject (</span></span><span><span>B.Sc./B.Eng./M.Sc</span></span><span><span>.); Chemical, Mechanical, Materials&nbsp;</span></span><span><span>⁠</span></span></p><br><p><span><span>&nbsp;Sr. Engineer / Engineer shall have membership of an internationally accepted applicable&nbsp;&nbsp;professional&nbsp;</span></span></p><br><p><span><span>Minimum 15 years of experience in Oil &amp; Gas.&nbsp;&nbsp;</span></span></p><br><p><span><span>Minimum 10 years of experience in Engineering Design (Concept / FEED / Detailed Design &amp; Operations)</span></span></p><br><p><span><span>Experience in the middle east is preferred.&nbsp;</span></span></p><br><p><strong>Moving forward together</strong></p><br><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p><br><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p><br><p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p><br> </div>

<p><b>Job title </b>Logistics &amp; Materials Engineer Grade Stream Upstream E&amp;P Function Well Delivery Department Operated Asset Location Oman Muscat Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Well Delivery Support Manager Direct Reports - Job purpose The Materials &amp; Logistics Engineer is responsible for planning, coordinating, and controlling materials and logistics activities to ensure that all required materials are available on time, meet technical and quality requirements, and support project schedules. The role supports drilling, workover, and well intervention operations by working closely with engineering, procurement, vendors, logistics providers, and site teams to ensure smooth project execution. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main tasks and responsibilities Review material requisitions and technical specifications to ensure compliance with company and project standards. Coordinate with drilling and engineering teams to address technical queries, material substitutions, and deviations. Ensure materials are procured, stored, and handled according to approved specifications, procedures, and industry standards. Maintain accurate material traceability, certifications, and documentation throughout the supply chain. Support the technical evaluation of vendors and materials when required. Review scopes of work related to materials, inspection, transportation, and quality control to ensure alignment with oil and gas industry best practices. Coordinate material receiving, inspection, storage, preservation, and issuance activities. Plan and manage inbound and outbound logistics, including transportation, shipping, and customs clearance, in line with OPAL standards. Ensure timely delivery of materials to warehouses, yards, and project sites according to project schedules. Monitor inventory levels and support stock optimization to prevent shortages or excess materials. Ensure proper identification, tagging, and preservation of materials to avoid damage or deterioration. Support periodic inventory audits and reconciliation processes. Interface with procurement, contracts, QA/QC, drilling, construction, and operations teams. Prepare and provide materials and logistics status reports to project management. Support expediting activities to ensure vendors and logistics providers meet agreed milestones. Participate in project planning and coordination meetings related to materials and logistics. Coordinate with well delivery team members to identify critical materials that must be prioritized for transportation. Ensure all activities comply with company supply chain policies, HSSE requirements, and quality management systems. Identify opportunities to improve logistics efficiency, material handling processes, and cost effectiveness. Ensure hazardous and non-hazardous materials are correctly labeled, packaged, and returned to base in accordance with environmental regulations. Contribute to lessons learned and continuous improvement initiatives. Use materials management and inventory systems to track material orders, consumption, and stock levels in real time. Key interactions Internal: Upstream External : Notable Working Conditions. Office environment, intensive computer screen use, sporadic visits to operation site, traveling, when possible and needed. Education requirements Minimum qualification is a bachelor s degree in mechanical engineering or equivalent. Language Excellent knowledge of written, read, and spoken English (required) Background and experience Competencies and skills 5+ years relevant experience in similar role Understanding of materials management and drilling procedures. Working knowledge of Microsoft, Excel, Power Point, Word and materials/logistics management software Soft: Attention to detail and high level of accuracy. Able to lead discussions credibly and effectively negotiate resolutions. Previous experience working with a diversified workforce, with good people skills Highly organized, detail-oriented and able to work independently. Strong Communication skills and coordination skills (including verbal and written). Analytical and problem solving skills. Technical: Very good knowledge in using material management software. Excellent business and technical report writing skills Deep working understanding of material management and operations Planning and Reporting skills.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum qualification is a bachelor s degree in mechanical engineering or equivalent.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>5+ years relevant experience in similar role</li><li>Understanding of materials management and drilling procedures.</li><li>Working knowledge of Microsoft, Excel, Power Point, Word and materials/logistics management software</li><li>Attention to detail and high level of accuracy.</li><li>Able to lead discussions credibly and effectively negotiate resolutions.</li><li>Previous experience working with a diversified workforce, with good people skills</li><li>Highly organized, detail-oriented and able to work independently.</li><li>Strong Communication skills and coordination skills (including verbal and written).</li><li>Analytical and problem solving skills.</li><li>Very good knowledge in using material management software.</li><li>Excellent business and technical report writing skills</li><li>Deep working understanding of material management and operations</li><li>Planning and Reporting skills.</li></ul>

<p><h4>About the role</h4> <p>Our client is seeking a results-driven digital marketing manager (B2B) to lead and scale the company’s marketing strategy across paid, organic, outbound, and brand channels. This role combines strategic leadership with hands-on execution and is ideal for a growth-minded marketer who thrives in fast-paced environments, understands modern B2B marketing trends, and can drive measurable pipeline and revenue impact.</p> <p>The digital marketing manager will own the full marketing funnel — from demand generation and lead nurturing to brand positioning and performance optimization — ensuring consistent growth, high-quality lead flow, and strong brand visibility. The ideal candidate is analytical, creative, execution-focused, and comfortable balancing strategy with day-to-day campaign management.</p> <h4>Responsibilities</h4> <strong>Strategy & marketing leadership</strong><br> <li>Develop and execute a comprehensive B2B marketing strategy aligned with company growth goals</li> <li>Own the marketing funnel end-to-end, from awareness and demand generation through lead nurturing and conversion</li> <li>Partner closely with leadership and sales teams to align marketing initiatives with revenue objectives</li> <li>Build, manage, and mentor high-performing marketing resources, agencies, or contractors as needed</li> <li>Identify scalable growth opportunities across acquisition, retention, and brand channels</li> <strong>Campaign management & growth execution</strong><br> <li>Lead and optimize multi-channel marketing campaigns across paid media, SEO, outbound, email marketing, social media, partnerships, and content</li> <li>Manage budgets and allocate spend strategically to maximize ROI and efficiency</li> <li>Oversee campaign messaging, positioning, and creative direction to maintain brand consistency</li> <li>Launch and manage performance-driven campaigns focused on pipeline growth and customer acquisition</li> <li>Test new acquisition channels, campaign structures, audiences, and messaging to improve results</li> <strong>Analytics, optimization & reporting</strong><br> <li>Track and analyze campaign performance metrics including CAC, CPL, ROAS, conversion rates, traffic, MQLs, SQLs, and revenue attribution</li> <li>Build dashboards and reports using platforms such as HubSpot, Google Analytics, Looker Studio, or other analytics tools</li> <li>Use data-driven insights to refine targeting, messaging, budget allocation, and campaign strategy</li> <li>Present actionable recommendations and performance updates to leadership regularly</li> <li>Continuously optimize campaigns through A/B testing and experimentation</li> <strong>Content, branding & messaging</strong><br> <li>Collaborate with content, design, and technical teams to ensure cohesive execution across channels</li> <li>Guide messaging strategy and brand positioning to strengthen market visibility and engagement</li> <li>Support content initiatives including blogs, landing pages, outbound messaging, and campaign assets</li> <li>Ensure all marketing efforts align with brand voice, customer pain points, and business objectives</li> <strong>Cross-functional collaboration</strong><br> <li>Work closely with sales teams to improve lead quality, funnel conversion, and campaign alignment</li> <li>Coordinate with operations and product stakeholders to ensure marketing supports business priorities</li> <li>Contribute to broader growth strategy discussions and go-to-market initiatives</li> <h4>What makes you a perfect fit</h4> <li>Strategic thinker who connects marketing execution to business outcomes</li> <li>Hands-on operator comfortable managing campaigns and optimizing performance directly</li> <li>Data-driven marketer who thrives on experimentation, testing, and continuous improvement</li> <li>Creative storyteller capable of building compelling brand and campaign messaging</li> <li>Strong communicator and collaborative leader who works effectively across teams</li> <h4>Required experience & skills</h4> <li>Proven experience in B2B marketing leadership roles such as head of marketing, growth lead, or senior marketing manager</li> <li>Demonstrated success driving measurable growth through paid ads, outbound marketing, SEO, and organic channels</li> <li>Strong understanding of modern B2B marketing tools and platforms including LinkedIn Ads, Google Ads, Meta Ads, HubSpot, analytics tools, and outbound systems</li> <li>Experience balancing strategic planning with hands-on execution</li> <li>Strong analytical mindset with experience interpreting performance data and optimizing campaigns accordingly</li> <li>Excellent leadership, communication, and project management skills</li> <h4>Preferred experience & skills</h4> <li>Experience leading marketing functions in B2B service-based, SaaS, or professional industries</li> <li>Background in account-based marketing (ABM) or performance-driven demand generation</li> <li>Familiarity with CRM and automation platforms such as HubSpot, Salesforce, or Marketo</li> <li>Experience managing cross-functional marketing teams or external agencies</li> <li>Strong branding, storytelling, and positioning capabilities</li> <li>Experience scaling marketing systems in high-growth environments</li> <h4>What does a typical day look like?</h4> <p>A digital marketing manager’s day is a mix of strategic planning, campaign execution, and performance analysis. You will:</p> <li>Review campaign dashboards and optimize active marketing initiatives</li> <li>Collaborate with leadership, sales, and content teams to align priorities and messaging</li> <li>Launch and refine campaigns across paid and organic channels</li> <li>Monitor lead flow, pipeline quality, and funnel conversion performance</li> <li>Test new acquisition ideas, audience segments, creatives, and messaging strategies</li> <li>Analyze campaign data and prepare actionable reports and recommendations</li> <p>In essence: you are responsible for driving pipeline growth, strengthening brand visibility, and ensuring marketing efforts generate measurable business impact.</p> <h4>Key metrics for success (KPIs)</h4> <li>Marketing qualified leads (MQLs) and sales qualified leads (SQLs)</li> <li>Customer acquisition cost (CAC) and marketing ROI</li> <li>Website traffic and conversion rate growth</li> <li>Lead-to-opportunity and opportunity-to-customer conversion rates</li> <li>Paid campaign performance and ROAS</li> <li>Brand visibility, engagement, and audience growth across channels</li> <h4>Interview process</h4> <li>Application review – assessment of experience and role alignment</li> <li>Initial interview – discussion of background, marketing expertise, and growth mindset</li> <li>Technical interview – deep dive into strategy, campaign management, analytics, and execution capabilities</li> <li>Final interview – leadership and culture fit discussion with the client team</li> <li>Offer & background verification</li></p><p></p>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Senior Civil Engineer</h4> <ul> <li>Minimum 12 years of experience in oil and gas industry</li> <li>Familiar with international structural codes and standards</li> <li>Experience in structural design using STAAD, etc.</li> <li>Experience in design of platforms, pipe racks</li> <li>Experience in structural building designs (shelters, warehouses, etc.)</li> <li>5 years of experience on site construction</li> <li>Degree in civil engineering</li> </ul> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<p>Supervise the execution of the safe &amp; efficient well drilling activities during assigned shift for the development, appraisal and exploration wells, and support the drilling engineers for any operational challenges/trainings and any other technical support. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><br></p><p><br></p><p><strong>Main tasks and responsibilities</strong></p><p><strong>HSE Roles &amp; Responsibilities:</strong></p><ul><li>Provide technical input during any HSE Emergency incident or Well control event arising from Well Engineering activities.</li><li>Responsible for the implementation of Well Delivery HSSE annual plan and ensure all units under Well Delivery operate 'at all time' in compliance with OQ HSSE requirements.</li><li>Assist in the close-out HSE actions resulting from Audit or incident investigations.</li><li>Actively contribute to all high potential HSE incidents investigations including participation in the investigation team while ensuring OQ investigation process is followed and all required reports completed on time.</li><li>When required, act as Well Delivery representative as per the Emergency Response Plan.</li><li>Ensure to Work safely and think proactively about personal safety and safety of others at work</li><li>Actively participate in, contribute to, and promote company occupational health, safety, security and environment culture.</li><li>Ensure work is carried out in accordance with the Company HSE and Security policies and procedures and meet company HSE goals and targets, and participate in HSE programs.</li></ul><p><strong>Operations Roles &amp; Responsibilities::</strong></p><ul><li>Execute the assigned work instructions for drilling and service in all aspects of daily drilling and completion activities including (but not limited to); drilling operations, casing operations, cementing operations, well integrity assurance, petrophysical data acquisition, geological data acquisition, fluid systems management, remedial operations and completion operations to ensure compliance with OQ programs.</li><li>In doing so, the roles may include but are not limited to: <ul><li>Selection of tools for bottom hole assemblies to identify an optimum configuration that optimizes performance of the tools string and job objective;</li><li>Monitor operation of equipment controls to ensure pipe movement in and/or out of the well does not compromise well control</li><li>Strong understanding of down-hole conditions: such as Problems associated with the drilling, due to the disturbances of earth stresses around the borehole, caused by the creation of the hole itself and by drilling mud/formation interaction). Open/sable hole by maintaining a balance between earth stresses and pore pressure on one side and well bore mud pressure and chemical composition on the other side (pressure and temperature reduce constantly, and the solubility of elemental sulfur in natural gas decreases continuously)</li><li>Perform field calculations to cementation jobs.</li><li>Supervise all rig up and rig downs on location including unit transit between locations to ensure HSE is not compromised.</li><li>Execute the assigned Drilling task for the Unit(s) and ensure are tested, maintained and operated within their envelope and as per OQ/OEM requirements.</li><li>Provide a detailed post-well operational performance review report.</li><li>Liaise with Senior Drilling Engineer on requirements for operation optimization or remedial work and formulates revised work instructions in accordance with OQ change management requirements.</li></ul></li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Development/Exploration Departments / Central Operations and Facilities Departments / Supply Chain Management Department.</li><li>External: Contractors &amp; Service Providers</li></ul><p><strong>Notable Working Conditions.</strong></p><p>Field Operational environment, computer screen use. (Shift)</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><p>Degree in Petroleum engineering or related.</p><p><strong>Language requirements :</strong></p><p>Excellent knowledge of written, read, and spoken English (required)</p><p>Arabic - Native (desirable)</p><p><strong>Background and experience</strong></p><p>+10 years of relevant experience</p><p>Well-rounded professional with strong background in petroleum engineering or G&amp;G, adaptable and motivated general management strategist who relishes challenges.</p><p><strong>Competencies and skills:</strong></p><p><strong>Soft:</strong> Strong management &amp; leadership skills &amp; should be able to work collaboratively with all involved. Excellent interpersonal skills and multi-cultural sensitivity.</p><p><strong>Technical:</strong> Computer literate with expertise in MS Office. Hands on experience at managerial level in Oil &amp; Gas subsurface field Experienced in resource control, contract management and general management.</p>

<p>Supervise the execution of the safe &amp; efficient well drilling activities during assigned shift for the development, appraisal and exploration wells, and support the drilling engineers for any operational challenges/trainings and any other technical support.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><p><strong>HSE Roles &amp; Responsibilities:</strong></p><ul><li>Provide technical input during any HSE Emergency incident or Well control event arising from Well Engineering activities.</li><li>Responsible for the implementation of Well Delivery HSSE annual plan and ensure all units under Well Delivery operate 'at all time' in compliance with OQ HSSE requirements.</li><li>Assist in the close-out HSE actions resulting from Audit or incident investigations.</li><li>Actively contribute to all high potential HSE incidents investigations including participation in the investigation team while ensuring OQ investigation process is followed and all required reports completed on time.</li><li>When required, act as Well Delivery representative as per the Emergency Response Plan.</li><li>Ensure to Work safely and think proactively about personal safety and safety of others at work</li><li>Actively participate in, contribute to, and promote company occupational health, safety, security and environment culture.</li><li>Ensure work is carried out in accordance with the Company HSE and Security policies and procedures and meet company HSE goals and targets, and participate in HSE programs.</li></ul><p><strong>Operations Roles &amp; Responsibilities:</strong></p><ul><li>Execute the assigned work instructions for drilling and service in all aspects of daily drilling and completion activities including (but not limited to); drilling operations, casing operations, cementing operations, well integrity assurance, petrophysical data acquisition, geological data acquisition, fluid systems management, remedial operations and completion operations to ensure compliance with OQ programs. In doing so, the roles may include but are not limited to:</li><li>Select ion of tools for bottom hole assemblies to identify an optimum configuration that optimizes performance of the tools string and job objective;</li><li>Monitor operation of equipment controls to ensure pipe movement in and/or out of the well does not compromise well control</li><li>Strong understanding of down-hole conditions: such as</li><li>Problems associated with the drilling, due to the disturbances of earth stresses around the borehole, caused by the creation of the hole itself and by drilling mud/formation interaction).</li><li>Open/sable hole by maintaining a balance between earth stresses and pore pressure on one side and well bore mud pressure and chemical composition on the other side (pressure and temperature reduce constantly, and the solubility of elemental sulfur in natural gas decreases continuously)</li><li>Perform field calculations to cementation jobs.</li><li>Supervise all rig up and rig downs on location including unit transit between locations to ensure HSE is not compromised.</li><li>Execute the assigned Drilling task for the Unit(s) and ensure are tested, maintained and operated within their envelope and as per OQ/OEM requirements.</li><li>Provide a detailed post-well operational performance review report.</li><li>Liaise with Senior Drilling Engineer on requirements for operation optimization or remedial work and formulates revised work instructions in accordance with OQ change management requirements.</li></ul><p><strong>Key interactions</strong></p><p>Internal: Development/Exploration Departments / Central Operations and Facilities Departments / Supply Chain Management Department.</p><p>External: Contractors &amp; Service Providers</p><p><strong>Notable Working Conditions.</strong> Field Operational environment, computer screen use. (Shift)</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree in Petroleum engineering or related.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Arabic - Native (desirable)</li><li>+10 years of relevant experience</li><li>Well-rounded professional with strong background in petroleum engineering or G&amp;G, adaptable and motivated general management strategist who relishes challenges.</li><li><strong>Soft:</strong></li><li>Strong management &amp; leadership skills &amp; should be able to work collaboratively with all involved.</li><li>Excellent interpersonal skills and multi-cultural sensitivity.</li><li><strong>Technical:</strong></li><li>Computer literate with expertise in MS Office.</li><li>Hands on experience at managerial level in Oil &amp; Gas subsurface field</li><li>Experienced in resource control, contract management and general management.</li></ul>

<p>PRINCIPAL ACCOUNTABILITIES</p><p>1. Carry out interpretation of 2D and 3D seismic data from the historical seismic databank and from new data received from seismic surveys. Identifies subsurface structure/trapping mechanism and reservoir distribution utilizing geophysical software packages such as Petrel, Geo-Graphix, DSD etc.</p><p>2. Generating plausible geophysical and geological concepts for leads and prospects in all possible plays, with appropriate risks, volume and commercial analysis and in support of a growing inventory of exploration portfolio.</p><p>3. Establish and maintain up-to-date Exploration Prospect Portfolio for all prospects for all levels, shallow to deep plays.</p><p>4. Identify new oil and gas prospects based on comprehensive technical work mainly Geophysical and Geological, from a regional prospective to block and field/prospect level.</p><p>5. Perform detail evaluation of identified prospect to progress to well proposal, presenting to the Management and shareholders to seek approval to drill Exploration wells in which clear conclusions and recommendations are required to the management to make decisions.</p><p>7. Work closely with Exploration geologist and reservoir engineer on analysis work of new found traps to ascertain the most likely locations of reservoir tops and subsequent locations of potential wells.</p><p>8. Identify optimal drilling locations using knowledge of 3D seismic interpretation and knowledge of regional and prospect specific petroleum systems.</p><p>9. Seamless coordination of all exploration-related operations between relevant internal and external parties.</p><p>10. Involvement on Tender documentation preparation and evaluation of bids for any study pertaining seismic; such as seismic data acquisition, survey plan, Processing, Reservoir Characterization, VSP, prospect identification etc.</p><p>11. Follow up and Supervise specialist or outsourced studies of seismic evaluation.</p><p>12. Stays up to date with current developments in seismic and geophysical mapping techniques and software. The role will also involve participating in the assessment of new technology, methodologies and workflows</p><p>13. Provide mentorship, guidance and control as required to junior Daleel geoscience staff with respect to geophysical methods and evaluation procedures.</p><p>14. Follows and promotes all QHSSE policies of the Company at all times.</p><p>KEY CHALLENGES:</p><p>Ability to work in both; Exploration and Development environments</p><p>Supporting day-to-day operations on well delivering for Exploration/Appraisal wells</p><p>Works closely with other team members as and when required.</p><p>To complete the company KPI by drilling required number of Exploration wells per year.</p><p>Ability to interact with internal and external clients</p><p><strong>Desired Candidate Profile</strong></p>JOB KNOWLEDGE, SKILLS AND EXPERIENCE<br>Minimum Academic Qualifications: Bachelor's degree in Geophysics or a related discipline<br>Minimum Work experience: At least 12 years experience in Geophysics or Seismic Interpretation in a recognized oil company and integration of seismic, well and other data.<br>Knowledge of Oman plays and Petroleum systems.<br>Proven Exploration record in finding new oil and gas resources.<br>Experience upstream E&amp;P professional with familiarity in petroleum systems analysis, well data analysis, geological interpretation and prospect evaluation.<br>Maturation and development of new prospects.<br>Experience in workstation-based seismic interpretation from regional to prospect level.<br>Awareness of seismic acquisition and processing<br>An understanding of principles of rock physics and quantitative seismic interpretation would be desirable.<br>Must be a technically established engineer in the Geophysics and well skilled in mentoring and motivating new Geophysicist.

<p><br>Position: Pre-Sales Solutions Engineer<br>Location: Other<br>City: Muscat, Oman<br>Sector: Consulting<br>Years of Experience Fresh, 2-5 Years<br>Qualification: Degree in Computer Engineering, Computer Science, Artificial Intelligence, Information Technology, or a related field<br>Salary: Undisclosed<br>Workdays: 5 Working Days</p><p><strong>Desired Candidate Profile</strong></p><p><b>Responsibilities</b><br>Engage with enterprise IT departments in Oman to understand technical requirements, business challenges, and project objectives.<br>Support the presentation of the employers AI-native software development and product design services to technical and business stakeholders.<br>Assist in preparing technical proposals, solution outlines, presentations, and scope documentation aligned with the employers delivery methodology.<br>Collaborate with senior team members and the founder during client discussions related to scope, timelines, technical requirements, and commercial proposals.<br>Maintain regular communication with clients after project confirmation and support implementation follow-up through delivery.<br>Develop strong working relationships with CIOs, CTOs, IT managers, and other enterprise technology stakeholders.<br>Represent the employer professionally at technology events, enterprise IT forums, meetings, and networking activities across Oman.<br>Qualifications<br>Bachelor s degree in Computer Engineering, Computer Science, Artificial Intelligence, Information Technology, or a related field.<br>Fresh graduates with strong technical and communication capabilities are encouraged to apply; candidates with 2-5 years of experience in pre-sales, solutions engineering, technical account management, or a related client-facing technology role are preferred.<br>Foundational to intermediate understanding of AI, software development, software architecture, and digital product concepts.<br>Strong presentation, communication, relationship-building, and consultative problem-solving skills.<br>Fluent Arabic and English communication skills, both spoken and written.<br>Ability to work independently, manage multiple client interactions, and take ownership of assigned opportunities and follow-up activities.<br>Omani national or eligible for full Omani work authorization.</p>

<ul><li><p>Field demonstrations and hands-on customer visits to drive pipeline growth, actively identifying and qualifying new sales opportunities alongside cold outreach, phone calls, networking, and business directories.</p></li><li><p>Conduct product demonstrations at job sites and explain product features, applications and benefits to customers.</p></li><li><p>Generate leads and develop new customers for power tools and related products.</p></li><li><p>Maintain regular follow-ups with customers and manage sales activities, enquiries, quotations, emails, call logs and appointments.</p></li><li><p>Achieve monthly sales targets and business development objectives.</p></li><li><p>Understand customer requirements and recommend suitable power tools and solutions.</p></li><li><p>Handle the complete sales cycle from enquiry generation to order confirmation.</p></li><li><p>Manage key accounts and develop strong, long-term customer relationships.</p></li><li><p>Coordinate with internal teams regarding product availability, delivery, technical requirements and customer support.</p></li><li><p>Maintain awareness of competitor products, market trends and pricing.</p></li><li><p>Provide basic after-sales support and coordinate with the service team to address customer requirements.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Age 22- 30 years</p></li><li><p>Minimum 1-3 years of experience as a Sales Engineer / Sales Executive in power tools or industrial equipment.</p></li><li><p>Diploma / ITI / Engineering qualification in Mechanical, Production, Automobile or Electrical fields.</p></li><li><p>Experience handling power tool brands such as HiKOKI (Hitachi), Makita, Bosch or DeWalt will be highly preferred.</p></li><li><p>Candidates with experience in trading companies in GCC or India are preferred.</p></li><li><p>Strong technical knowledge of professional and industrial power tools.</p></li><li><p>Experience in product demonstrations, technical comparisons and value selling.</p></li><li><p>Experience handling the complete sales cycle, including enquiry generation, quotation, negotiation, order closing and payment collection.</p></li><li><p>Good English communication skills.</p></li><li><p>Willingness to travel for customer visits and sales activities.</p></li><li><p>Good customer relationship and business development skills.</p></li><li><p>Proficiency in MS Word, Excel, PowerPoint, email communication and basic file management.</p></li></ul>

<p>POSITION SUMMARY Fix minor plumbing problems such as unclogging drains. Assemble pipe sections, tubing, and fittings. Fill pipes or plumbing fixtures with water or air to detect and locate leaks. Review blueprints, building codes, and specifications. Study building plan and inspect structure in order to plan installations. Measure, cut, thread, and bend pipe to required angle. Install and maintain pipe assemblies, fittings, valves, appliances, and fixtures. Perform miscellaneous minor repairs. Perform preventative maintenance on tools and equipment. Follow all company and safety and security policies and procedures; and report safety hazards, accidents, or injuries; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests service needs. Develop and maintain positive working relationships with others. Speak with others using clear and professional language. Ensure adherence to quality expectations and standards. Move, lift, carry, push, pull, and place objects weighing less than or equal to 75 pounds without assistance. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Grasp, turn, and manipulate objects of varying size and weight. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move up and down a ladder. Stand, sit, or walk for an extended period of time. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: Technical, Trade, or Vocational School Degree. Related Work Experience: At least 2 years related work experience. Supervisory Experience: No supervisory experience. License or Certification: Stationary Engineer/Boiler Operator License Plumber Certification</p>

<p>We are seeking a detail-oriented and experienced Quality Engineer to join our dynamic team in the Oil & Gas sector in Oman. The ideal candidate will play a crucial role in ensuring that our products and processes meet rigorous quality standards and comply with industry regulations, contributing to the safety, reliability, and efficiency of our operations. Responsibilities: - Develop, implement, and maintain quality control systems and procedures to ensure compliance with industry standards and customer requirements. - Conduct regular inspections, audits, and assessments of processes, equipment, and materials to identify and address quality issues. - Collaborate with cross-functional teams including engineering, production, and supply chain to resolve quality-related problems and improve overall product quality. - Analyze quality data and generate reports to monitor performance and drive continuous improvement initiatives. - Support root cause analysis and corrective action processes for non-conformities and customer complaints. - Ensure adherence to safety and environmental regulations in all quality processes. - Provide training and guidance on quality standards and best practices to team members and stakeholders.</p><p>- Bachelor’s degree in Engineering, Quality Management, or a related field. - Minimum of 3 years experience in quality engineering within the Oil & Gas industry or a similar industrial environment. - Strong knowledge of quality management systems such as ISO 9001, API Q1, or equivalent standards. - Proficient in statistical analysis tools and quality control methodologies. - Excellent problem-solving skills with the ability to analyze data and implement effective solutions. - Strong communication and interpersonal skills to collaborate effectively across teams. - Ability to work independently and manage multiple priorities in a fast-paced environment. - Willingness to work on-site in Oman with occasional travel as required.</p>

<p><b>Role &amp; responsibilities</b></p><p><br></p><p><br></p><p>Develop and implement innovative recruiting strategies to attract top talent in a competitive market.</p><p>Candidate Sourcing &amp; Screening</p><p>Screen CVs based on job descriptions, competency requirements, and GCC experience</p><p>Conduct initial HR interviews to evaluate technical skills, communication, and cultural fit.</p><p>Conduct thorough interviews and assessments to evaluate candidates' qualifications and cultural fit.</p><p>Manage the entire recruitment process, from job posting to onboarding, ensuring a seamless experience for candidates.</p><p>Collaborate with hiring managers to identify specific hiring needs and tailor recruitment efforts accordingly.</p><p>Offer Management &amp; Hiring Documentation</p><p>Prepare offer letters, contracts, and salary structures as per company policy</p><p>Ensure compliance with Oman Labor Law and company HR procedures</p><p>Onboarding &amp; Induction</p><p>•Manage onboarding activities including orientation, documentation, and policy briefing</p><p><br></p><p><b>Preferred candidate profile</b></p><p><br></p><p><br></p><p>Bachelor's degree in Human Resources, Business Administration, or a related field is preferred.</p><p>2-8 years of experience in recruitment or talent acquisition, preferably within Facility Management, Construction &amp; Catering industries desired.</p><p>Relevant certifications such as PHR, SHRM-CP, or equivalent are considered a strong asset.</p><p>Experience with applicant tracking systems (ATS) and HR software to streamline recruitment processes.</p><p><strong>Desired Candidate Profile</strong></p><h2>Preferred candidate profile</h2><p>Bachelor's degree in Human Resources, Business Administration, or a related field is preferred. 2-8 years of experience in recruitment or talent acquisition, preferably within Facility Management, Construction &amp; Catering industries desired. Relevant certifications such as PHR, SHRM-CP, or equivalent are considered a strong asset. Experience with applicant tracking systems (ATS) and HR software to streamline recruitment processes.</p>

<p>The Instrumentation Asset Data & SAP PM Engineer is responsible for ensuring the accuracy, completeness, and integrity of instrumentation asset data, conducting equipment criticality assessments, and maintaining asset master data within SAP Plant Maintenance (PM). The role supports maintenance reliability, asset performance, and operational excellence by standardizing equipment information and ensuring compliance with engineering and maintenance standards.</p><br><ul><li><p>Review instrumentation records to identify missing, inaccurate, or incomplete equipment data.</p></li><li><p>Verify equipment information using P&IDs, loop diagrams, instrument index, datasheets, and asset registers.</p></li><li><p>Coordinate with Engineering, Maintenance, and Operations teams to collect and validate equipment information.</p></li><li><p>Prepare and standardize equipment datasheets for pressure, temperature, flow, level, analyzers, control valves, and other instrumentation assets.</p></li><li><p>Update technical specifications, operating ranges, calibration details, and equipment parameters while ensuring document accuracy and revision control.</p></li><li><p>Perform equipment criticality assessments based on safety, environmental, production, and reliability impacts.</p></li><li><p>Classify instrumentation assets according to operational risk and support the development of preventive and predictive maintenance strategies.</p></li><li><p>Create, update, and maintain SAP PM master data, including Equipment Masters, Functional Locations, Classification, and Maintenance Plans.</p></li><li><p>Ensure proper asset hierarchy, coding standards, and data quality within SAP.</p></li><li><p>Support asset management initiatives by maintaining accurate equipment records and improving master data quality.</p></li><li><p>Ensure compliance with company engineering standards, maintenance procedures, and HSE requirements.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's Degree in Instrumentation Engineering or a related Engineering discipline.</p></li><li><p>Minimum <strong>5 years</strong> of experience in instrumentation maintenance, reliability, or asset management within industrial environments.</p></li><li><p>Hands-on experience with <strong>SAP Plant Maintenance (SAP PM)</strong>, including Equipment Master Data and Functional Locations.</p></li><li><p>Strong knowledge of industrial instrumentation, calibration, P&IDs, loop diagrams, and engineering documentation.</p></li><li><p>Experience in equipment criticality assessment and maintenance planning is preferred.</p></li><li><p>Proficient in Microsoft Office applications, particularly Excel.</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Our client an expanding hotel group in the 4 and 5 star category, based in Cyprus, and focused on maintaining high standards across its properties through strong technical operations, reliable infrastructure, and well-managed engineering functions is looking for an experienced and qualified Chief engineer.<br> This is an opportunity to join a growing organization where hotel engineering and maintenance play a central role in supporting day-to-day operations, guest experience, and long-term property performance.<br> The role is suited to a senior engineering leader who can bring technical depth, operational oversight, and a practical approach to maintaining complex hospitality environments.<br> Responsibilities Lead preventive and corrective maintenance activities across the property.<br> Oversee MEP systems to support safe and efficient building operations.<br> Manage HVAC and refrigeration systems.<br> Supervise electrical and mechanical installations.<br> Provide leadership to the engineering team.<br> Drive energy and utility management initiatives.<br> Support renovation and refurbishment projects.<br> Ensure health, safety, and technical compliance.<br> Competitive salary based on current market standards Required Qualifications Degree or diploma in Mechanical Engineering, along with a valid Mechanical Engineering License.<br> 7-10 years of engineering or maintenance experience in hotels, resorts, facilities management companies, large commercial properties, or similar technical environments, including hotel or resort operations.<br> Hands-on experience with HVAC and refrigeration systems, MEP systems, electrical installations, mechanical systems, and building maintenance systems.<br> Strong background in preventive maintenance programs, energy management practices, and energy and utilities management.<br> Knowledge of health and safety compliance requirements in building or hotel operations, with experience supporting renovation and refurbishment work.<br> Experience working with Hotel General Managers and internal engineering teams.<br> Business-fluent English.<br> Preferred Qualifications Experience in complex and large hotel environments.<br> An additional relevant engineering or technical certification.<br> Business-fluent Greek though not essential would be a plus.<br></span> </div>

<p> <strong>Role &amp; responsibilities</strong> </p> <p> </p> <ul> <li>Field demonstrations and hands-on customer visits to drive pipeline growth, actively identifying and qualifying new sales opportunities alongside cold outreach, phone calls, networking, and business directories.</li> <li>Conduct product demonstrations at job sites and explain product features, applications and benefits to customers.</li> <li>Generate leads and develop new customers for power tools and related products.</li> <li>Maintain regular follow-ups with customers and manage sales activities, enquiries, quotations, emails, call logs and appointments.</li> <li>Achieve monthly sales targets and business development objectives.</li> <li>Understand customer requirements and recommend suitable power tools and solutions.</li> <li>Handle the complete sales cycle from enquiry generation to order confirmation.</li> <li>Manage key accounts and develop strong, long-term customer relationships.</li> <li>Coordinate with internal teams regarding product availability, delivery, technical requirements and customer support.</li> <li>Maintain awareness of competitor products, market trends and pricing.</li> <li>Provide basic after-sales support and coordinate with the service team to address customer requirements.</li> </ul> <br> <p> <strong>Preferred candidate profile</strong> </p> <p> </p> <ul> <li>Age 22- 30 years</li> <li>Minimum 1-3 years of experience as a Sales Engineer / Sales Executive in power tools or industrial equipment.</li> <li>Diploma / ITI / Engineering qualification in Mechanical, Production, Automobile or Electrical fields.</li> <li>Experience handling power tool brands such as HiKOKI (Hitachi), Makita, Bosch or DeWalt will be highly preferred.</li> <li>Candidates with experience in trading companies in GCC or India are preferred.</li> <li>Strong technical knowledge of professional and industrial power tools.</li> <li>Experience in product demonstrations, technical comparisons and value selling.</li> <li>Experience handling the complete sales cycle, including enquiry generation, quotation, negotiation, order closing and payment collection.</li> <li>Good English communication skills.</li> <li>Willingness to travel for customer visits and sales activities.</li> <li>Good customer relationship and business development skills.</li> <li>Proficiency in MS Word, Excel, PowerPoint, email communication and basic file management.</li> </ul> <br>

<ul><li><p>Implement QA/QC activities including those of sub suppliers works in accordance with approved ITPs and procedures, method statements and other control Documents;</p></li><li><p>Prepare and sign off applicable records for quality surveillance/inspections/tests;</p></li><li><p>Carry out surveillance inspections to verify processes and procedures compliance. The surveillance role shall be as follows but not limited to:</p></li></ul><p>o To monitor all activities with respect to quality performance.</p><p>o Raising RFI to client for day-to-day construction activities</p><p>o Witness Pigging/ hydro test/Pneumatic test activities.</p><p>o Line walks and punch list preparation / closeouts.</p><p>o PQR/WQT conduct as per PWPS & WPS</p><p>o To ensure that the materials are from the approved Suppliers.</p><p>o To ensure close out of NCR’s with suitable correction and corrective actions.</p><ul><li><p>Maintain records of calibration, inspection and testing equipment.</p></li><li><p>Ensure availability of appropriate version of applicable documents;</p></li><li><p>Witness qualification procedures, tests and certify the results.</p></li><li><p>Issue Inspection Release Note of Product/ Sign test pack (QC dossier), as applicable.</p></li><li><p>Provide feedback to Site Quality Engineer or next immediate authority in quality organization chart (where SQE is not identified) on the day to day quality issues.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>HNC or HND or graduate or equivalent in Mechanical Engineering, welding Engineering or Metallurgy or appropriate craft training</p><p>CSWIP 3.1 / AWS or equivalent and certified to ASNT / EN 473 / PCN level II in RT, PT, MT and UT techniques.</p><p>Minimum 6 years (HNC/HND) experience in inspection in Pipeline, piping, tanks, pressure equipment, valves, piping, rotating equipment, and refinery construction works as applicable. Familiar with mechanical and metallurgical testing requirements</p><ul><li><p>Strong oral and written communication skills in English</p></li><li><p>Good knowledge and skills in quality audit</p></li><li><p>Good knowledge of MS Office</p></li></ul>

<p>We are excited to announce a new luxury Nikki Beach Resort &amp; Spa project in Yiti Bay, Sultanate of Oman, and we are looking for a seasoned Director of Maintenance &amp; Conservation to join our pre-opening leadership team. This is a unique opportunity to be part of a landmark development from the ground up, shaping the engineering and facilities function from pre-opening through to full operations. The ideal candidate is a hospitality engineering leader with a strong technical background, excellent organizational skills, and proven experience in pre-opening resort or hotel projects.</p><p><b>Key Responsibilitie</b>s:</p><ul><li>Lead all engineering, maintenance, and technical operations during the pre-opening phase and beyond.</li><li>Work closely with the construction, design, and project teams to ensure engineering standards and systems are aligned with brand and safety requirements.</li><li>Develop and implement preventive maintenance schedules and engineering policies for all areas of the resort (HVAC, electrical, plumbing, water treatment, fire safety systems, etc.).</li><li>Hire, train, and manage the engineering team to ensure smooth operations from day one.</li><li>Oversee energy management, sustainability efforts, and regulatory compliance.</li><li>Manage budgets, equipment procurement, and contractor/vendor relationships.</li><li>Support risk management initiatives, emergency preparedness, and workplace safety.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 8 10 years of experience in engineering or technical services within the hospitality industry.</li><li>At least 3 years in a leadership role, preferably as Director of Engineering or Chief Engineer.</li><li>Pre-opening experience in resorts or hotels is highly preferred.</li><li>Prior work experience in Oman is an advantage</li><li>Strong knowledge of building systems, mechanical/electrical infrastructure, and health &amp; safety standards.</li><li>Ability to read and interpret blueprints and technical documents.</li><li>Proven ability to lead diverse teams and work collaboratively with various departments.</li><li>Excellent communication, leadership, and problem-solving skills.</li><li>Degree or diploma in Engineering, Facilities Management, or a related field.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>As Shift Technician (Buggy &amp; Generator), I will fully comprehend the vision of Six Senses to help people reconnect with themselves, others and the world around them and our values of local sensitivity and global sensibility, crafted experiences, emotional hospitality, responsible and caring, fun and quirky and pioneering wellness.</p><br><p>Sustainability, Wellness and Out of the Ordinary experiences are at the core of everything we do at Six Senses. I will safeguard these pillars and ensure full knowledge and active participation of all our brand initiatives.</p><br><p><strong>Duties and Responsibilities&nbsp;</strong><br>As Shift Technician, I will assume full responsibility for the efficient operation in the following:&nbsp;<br>• Evaluates mechanical, electromechanical systems and products by designing and conducting research programs; applying principles of mechanics, thermodynamics, hydraulics, heat transfer and materials.&nbsp;<br>• Develops mechanical and electromechanical products by studying customer requirements.&nbsp;<br>• Assures system and product quality by designing testing methods; tests finished product and system capabilities; confirms fabrication, assembly, and installation processes.&nbsp;<br>• Controls maintenance tools, stores and equipment and ensure there is continuous cover of the machinery and equipment in case of breakdowns.&nbsp;<br>• Ensure the efficient and economic operation of the Generators and Buggy<br>• Giving solutions to any engineer for any Engineering related issue<br>• Assist the engineering Manager with reporting and technical issues<br>• Ensure that the budget is adhered to and costs are strictly controlled.&nbsp;<br>• Supporting the sustainability department on how we are to be self-sustainable and Cost saving<br>• Coordinate with engineering coordinator related with material order<br>• Control and monitor consumption of materials and asset.<br>• Keeps record of assignments and produce detailed work reports.&nbsp;<br>• Maintains working area and makes sure that all working areas remain clean at all times.&nbsp;<br>• Uses personal safety wares for personal safety while on duty.&nbsp;<br>• Upkeep Six Senses guidelines and standards of service and operation. My performance benchmarks are maintained and exceeded.&nbsp;<br>• Strictly adhere to LQA standards and guest comments.&nbsp;</p><br><p><strong>Qualifications</strong><br>To execute the position of Shift Technician&nbsp;, I must have the required qualifications, technical skills and experience in a similar role in luxury hotels with proven results and includes the following:</p><br><p>• High school diploma or equivalent and/or valid license to practice mechanical engineering and at least 1 year experience in a similar setting.&nbsp;<br>• Technical skills include the ability to analyze and design projects of limited complexity and scope. Knowledge in blueprint reading and installing of machines, wiring and equipment and basic mechanical skills are mandatory.<br>• I have an excellent command of written and spoken English, and I am able to live in a remote location for extended periods of time and travel on single status.</p><br><p><i>The above is intended to provide an overview of the role and responsibilities for a Shift Technician at Six Senses Zighy Bay. It is not and does not infer that the above is an inclusive and/or exhaustive list of the duties and responsibilities inherent to the position.</i></p><br><p><i>Six Senses Zighy Bay is an equal opportunity employer. This policy applies to all terms and conditions of employment.</i></p><br><br>At IHG, we’ve made a promise. As one of the world’s leading hotel groups, we’re here to deliver True Hospitality for Good. Making our guests and colleagues feel welcome, cared for, recognised and respected – wherever they are in the world. Want to be part of the journey? </div>

<ul><li>Prepare and study technical drawings, specifications of Electrical & Mechanical systems related to Power plants (Diesel / Gas), to ensure that installation and operations conform to Manufacturer’s recommended standards and customer requirements.</li><li>Direct and Coordinate with Customers for Construction & Installation support, documentation, and testing activities to ensure compliance with the agreed specifications and customer requirements.</li><li>Perform detailed calculations for Panel design / cable ratings etc related to Diesel / Gas Power Plant/s (415V / 11kV / 33kV) to comply with the standards and specifications.</li><li>Independently handle project execution to assure projects are completed satisfactorily, on time and within budget.</li><li>Develop budgets, estimate labor, material, and construction costs for the given projects / jobs.</li><li>Inspect completed installations and observe operations, to ensure conformity to design & equipment specifications and compliance with operational and safety standards.</li><li>Prepare specifications for purchase of materials and equipment required for the respective jobs / projects.</li><li>Supervise and train Project team members as per the required necessity.</li><li>Organise for Factory Acceptance tests & Site acceptance tests to the satisfaction of the Client / Consultants in line with the agreed specifications.</li><li>Investigate and test vendor’s products (like Panels / Transformers etc) at Vendor’s premises.</li><li>Investigate customer complaints related to Installations, determine nature and extent of problem, and recommend remedial measures.</li><li>Compile data and write progress reports regarding existing projects and compile handing over documents / drawings etc. of the completed projects.</li><li>Conduct pre tender site visits in coordination with the sales engineer/s to ascertain the technical / commercial requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s Degree in <strong>Electrical Engineering</strong>.</p></li><li><p><strong>6–10 years of relevant experience</strong> in Diesel/Gas Power Plants, Genset Projects, Power Generation or Electrical Project Engineering.</p></li><li><p>Strong experience in <strong>project execution, electrical installation, testing and commissioning</strong>.</p></li><li><p>Practical knowledge of <strong>415V / 11kV / 33kV electrical systems</strong>.</p></li><li><p>Experience with <strong>LV/MV switchgear, electrical panels, transformers, cables, protection systems and power distribution systems</strong>.</p></li><li><p>Experience in <strong>FAT, SAT, commissioning and customer/consultant inspections</strong>.</p></li><li><p>Ability to read and interpret <strong>SLDs, electrical schematics, cable schedules, panel drawings and technical specifications</strong>.</p></li><li><p>Experience in preparing electrical calculations, material specifications and project documentation.</p></li><li><p>Experience coordinating with <strong>customers, consultants, contractors and vendors</strong>.</p></li></ul>