Fire Fighting EngineerJobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking experienced Maintenance Technicians with a minimum of 7 years of experience in luxury residences, palaces, embassies, hotels, stadiums, commercial buildings, facilities management, oil &amp; gas, or other high-profile properties. The selected candidates will be responsible for preventive and corrective maintenance activities to ensure the safe, efficient, and uninterrupted operation of a VVIP residence. The role includes electrical, HVAC, plumbing, mechanical, and general building maintenance while maintaining the highest standards of professionalism, confidentiality, and service excellence. The position requires on-call availability for emergency maintenance requirements and involves both indoor and outdoor work, including lifting, climbing ladders, and other physical maintenance tasks.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Perform preventive and corrective maintenance of buildings, utility systems, and associated facilities.</p></li><li><p>Conduct routine inspections and identify maintenance issues before failures occur.</p></li><li><p>Carry out minor repairs on electrical, plumbing, HVAC, mechanical, carpentry, and building systems.</p></li><li><p>Maintain lighting systems, distribution boards, switches, sockets, and related equipment.</p></li><li><p>Repair plumbing fixtures, water supply systems, drainage systems, pumps, and sanitary installations.</p></li><li><p>Assist in maintaining HVAC systems, including split units, VRF systems, FCUs, AHUs, and ventilation systems.</p></li><li><p>Perform mechanical maintenance on pumps, motors, and rotating equipment.</p></li><li><p>Carry out furniture repairs and minor carpentry work.</p></li><li><p>Support maintenance of swimming pools, fountains, irrigation systems, gardens, and external facilities.</p></li><li><p>Respond promptly to emergency breakdowns and maintenance requests.</p></li><li><p>Maintain service reports, maintenance records, and spare parts inventories.</p></li><li><p>Coordinate with contractors and service providers.</p></li><li><p>Follow all HSE, security, and access-control procedures.</p></li><li><p>Maintain strict confidentiality regarding VVIP family activities and property information.</p></li></ul><p>Available Positions &amp; Requirements</p><p>AC Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Refrigeration &amp; Air-Conditioning Servicing (RAC) or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Strong knowledge of Chillers, AHUs, FCUs, CCUs, VRF Systems, and Central Plant Equipment</p></li><li><p>Experience in brazing, compressor replacement, HVAC troubleshooting, and preventive maintenance</p></li><li><p>Background in facilities management, commercial buildings, stadiums, or oil &amp; gas projects</p></li></ul><p>Electrician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Electrical Installation &amp; Maintenance or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Knowledge of MCC Panels, DBs, SMDBs, UPS Systems, Generators, and LV Systems</p></li><li><p>Strong troubleshooting and preventive maintenance experience</p></li><li><p>Experience in industrial plants, stadiums, or facilities management environments</p></li></ul><p>Electronic Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Electronics Products Assembly &amp; Servicing or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience with CCTV, BMS, PA Systems, Access Control Systems, Sliding Gates, and ELV Systems</p></li><li><p>Strong troubleshooting skills</p></li></ul><p>Fire Alarm Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Electrical/Electronics Technology or Fire Detection Systems or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience with Addressable &amp; Conventional Fire Alarm Systems, FM-200, Deluge Systems, Foam Systems, Fire Fighting Control Panels, Access Control Systems, UPS, and DC Systems</p></li><li><p>Strong fault-finding and preventive maintenance experience</p></li></ul><p>Mechanical Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Mechanical Technology, Industrial Mechanics, or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience with CHW Pumps, Cooling Tower Gearboxes, Motors, Rotating Equipment, and Pump Alignment</p></li><li><p>Strong troubleshooting and preventive maintenance knowledge</p></li></ul><p>Plumber</p><p>Requirements:</p><ul><li><p>TESDA NC III in Plumbing or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience in plumbing systems, sanitary installations, water supply networks, drainage systems, and PPR piping works</p></li><li><p>Strong troubleshooting, reporting, and documentation skills</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Description – Electrical Engineer (ELV &amp; LV Systems)</b></p><p><b>Position:</b> Electrical Engineer – ELV &amp; LV Systems</p><p><b>Location:</b> Salalah, Sultanate of Oman</p><p><b>Experience Required:</b> Minimum 8–10 Years GCC Experience</p><p><b>Qualification:</b> Bachelor of Engineering (Electrical/Electronics) with Certificate Attestation</p><p><b>Job Summary</b></p><p>We are looking for an experienced Electrical Engineer with strong expertise in project execution and maintenance of ELV and LV systems. The candidate should have hands-on experience in installation, troubleshooting, testing, commissioning, and maintenance of systems including Fire Alarm, CCTV, Access Control, Gate Barrier, and other general electrical systems. Knowledge in estimation, costing, procurement, and coordination is essential.</p><p><b>Key Responsibilities</b></p><ul><li>Handle project execution, maintenance, troubleshooting, and commissioning of ELV &amp; LV systems. </li><li>Maintain and support systems such as: </li><li>Fire Alarm Systems </li><li>CCTV Systems </li><li>Access Control Systems </li><li>Gate Barrier Systems </li><li>Other LV Electrical Systems </li><li>Perform preventive and corrective maintenance activities. </li><li>Prepare estimations, costing, BOQ, and procurement requirements. </li><li>Coordinate with suppliers, subcontractors, and clients for project activities. </li><li>Prepare technical reports, material submittals, and documentation. </li><li>Ensure compliance with NFPA standards and other applicable regulations. </li><li>Carry out site inspections, testing, and system performance verification. </li><li>Support AutoCAD basic design and drafting activities. </li><li>Attend emergency breakdowns and provide technical solutions. </li><li>Ensure safety procedures and quality standards are maintained at site. </li></ul><p><b>Qualification &amp; Experience</b></p><ul><li>Bachelor of Engineering in Electrical / Electronics Engineering. </li><li>Degree certificates must be attested. </li><li>Minimum 8–10 years GCC experience in ELV &amp; LV systems. </li><li>GCC Driving License is an added advantage. </li></ul><p><b>Salary &amp; Benefits</b></p><ul><li>Salary Range: USD 1,000 – 1,200 per month </li><li>Free Employment Visa </li><li>Free Air Ticket every 2 years </li><li>Free Accommodation </li><li>Free Water &amp; Electricity </li><li>Free Transportation </li><li>Free Life Insurance </li><li>Annual Leave: 2 months once every 2 years</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Skills &amp; Knowledge</b></p><ul><li>Strong knowledge in ELV &amp; LV systems. </li><li>Experience in Fire Alarm programming will be an added advantage. </li><li>Knowledge of NFPA standards. </li><li>Knowledge in estimation, costing, and procurement procedures. </li><li>Basic AutoCAD design and drafting knowledge. </li><li>Good troubleshooting and problem-solving skills. </li><li>Ability to manage projects and maintenance activities independently.</li><li>Able to work under minimum supervision.</li><li>24 x 7 Emergency Support.</li></ul></div>

<p><strong>POSITION DESCRIPTION:</strong> Position Title: Fire Fighting Supervisor Reports to: HSE Manager Department: Operation &amp; Maintenance - HSE Location: All OTTCO Terminals</p><p><strong>JOB PURPOSE:</strong> Lead and oversees as stand-alone role, the firefighting activities at OTTCO, under delegated authority and direction from OTTCO CHSSE, the owner of the Firefighting Services including resource planning, synchronization of operations, adjustment of operational parameters, through; (1) To control and overseas the replenishing consumables, scheduling inspection of fire hydrants, extinguishers and other equipment keeping all relevant maintenance reports and files. (2) Responsible of the Emergency Response, initial external Communication and Escalation to top level CHSSE. (3) supervise its assigned Unity team for the assigned sites, and (4) administer maintenance programs for OTTCO s firefighting systems and equipment; in order to ensure maintenance programs for OTTCO s firefighting systems and equipment specifications are set and met at optimum cost in a safe and efficient manner and handles all problems and emergencies occurring during shifts.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives</p><p><strong>REPORTING STRUCTURE:</strong> Number of Staff Supervised Direct Reports: 4 Total: 4</p><p><strong>KEY RESPONSIBILITIES:</strong></p><ul><li>Supervise the day-to-day Firefighting operations for the assigned site to ensure that work processes are implemented as designed and comply with established standards and procedures</li><li>Overview and influencing the teams in order to ensure the optimization of OTTCO s (as a system) in term of safety, environment, production, and margin cost.</li><li>Coach and mentoring of Firefighting Operators in order to contribute with department on capacity building Processes, and drive the agenda for continuous improvement.</li><li>Supervises and actively controls all Firefighting operations in close coordination with Unity Team.</li><li>Developed weekly / monthly reports</li><li>Implementation of Incident Command System and competencies.</li><li>Participate in the development of the emergency response and business continuity plans, continuously update, enhance, review and maintain the plans and pertaining documents to ensure they are up to date.</li><li>Plan and propose various awareness programs to encourage a work environment that values fire safety</li><li>Maintain up to date documentation on SOP s, departmental plans (Emergency Response Plans, Business Continuity plans etc.) for training purposes</li><li>Maintain on the ground presence during routine inspections, mock drills, and emergency scenario tests to observe and gather any feedback for improving the fire &amp; safety policies and plans</li><li>Initiates emergency response in case of major incidents.</li><li>Decides and declares type of emergency to ensure that all emergencies are handled in the most effective and safe way.</li><li>Acts as the Operations Site Coordinator during plant upset / emergency situations.</li><li>Ensures all operations staff are familiar with their unit emergency procedures</li></ul><p><strong>Optimization</strong></p><ul><li>Reviews and analyses Firefighting parameters and performance and takes necessary action to ensure targets are met with minimum wastage and optimum cost.</li><li>Works with the unit supervisor to identify and eliminate unplanned flare sources and optimize utility usage QHSE.</li><li>risks associated with their risk.</li><li>Awareness of Emergency preparedness and response measures.</li><li>Awareness on implications of not conforming to the integrated managements system requirements, including not fulfilling the organization s compliance obligations.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Operations Shift Staff, Engineers, Maintenance Coordinator, Maintenance, HSSE.</li><li>External: Surveying Companies, ROP and Civil Defense), other contractors and suppliers, Marketers.</li></ul><p>Notable Working Conditions: Field Operations and office environment, Moderate to intensive computer screen use.</p><p><strong>QUALIFICATIONS, EXPERIENCE, &amp; SKILLS:</strong></p><ul><li>Bachelors in Fire &amp; Safety Management or relevant</li><li>+10 Years of relevant experience in similar role.</li><li>Exposure to and experience with all fire and safety equipment s used in a refinery or petrochemicals</li><li>Demonstrated working experience in:</li><li>SOP interpretation</li><li>Refinery operations (Process, Static &amp; Rotating Equipment)</li><li>HSE (Permit to Work PTW, Confined Space, Process Safety, H2S Awareness, Basic Fire Fighting, Emergency Response</li><li>Process Control</li><li>Troubleshooting</li><li>Emergency Response Assessment</li><li>Risk Assessment</li></ul><p><strong>Competencies:</strong></p><ul><li>Proficiency in M/S Office</li><li>Procedure Writing</li><li>Information Management</li><li>Fire Equipment Specifying</li><li>Supervisory skills</li><li>Planning &amp; Organizing skills</li><li>Analytical &amp; Observational skills</li><li>Emergency Response Assessment</li><li>Risk Assessment</li><li>Ability to work collaboratively to develop and deliver appropriate solutions.</li><li>Ability to describe personal strengths and development needs.</li><li>Demonstrated ability to cooperate with and influence peers.</li><li>Demonstrated ability to listen and collaborate with others.</li><li>Technical understanding of downstream petroleum industries</li><li>Business understanding of HC (hydrocarbons) marketing and their movements</li><li>Understanding of LP optimization</li><li>Collaborative Approach</li><li>Managing performance</li><li>Exercising influence</li><li>Work Prioritization</li><li>Report Writing</li><li>SOP interpretation</li><li>Terminal operations (Process, Static &amp; Rotating Equipment)</li><li>HSE (Permit to Work PTW, Confined Space, Process Safety, H2S Awareness, Basic Fire Fighting, Emergency Response</li><li>Process Control</li><li>Troubleshooting</li><li>Risk Assessment</li><li>Communication</li></ul><p>Must hold a valid certificate in the following courses according to Association of Fire Chiefs:</p><ul><li>Fire Fighter I and II</li><li>First Aid and Basic Life Support</li><li>ICS 100 and 300</li><li>Incident Safety Officer</li><li>Industrial Fire Fighter</li><li>HAZMAT Operations</li><li>Rope Rescue</li><li>Confined Space Rescue</li><li>Bulk Storage Emergencies</li><li>Fire Inspector</li><li>Fire Instructor I, II</li><li>Fire Officer I, II</li><li>Train the trainer</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelors in Fire &amp; Safety Management or relevant</li><li>+10 Years of relevant experience in similar role.</li><li>Exposure to and experience with all fire and safety equipment s used in a refinery or petrochemicals</li><li>Demonstrated working experience in:</li><li>SOP interpretation</li><li>Refinery operations (Process, Static &amp; Rotating Equipment)</li><li>HSE (Permit to Work PTW, Confined Space, Process Safety, H2S Awareness, Basic Fire Fighting, Emergency Response</li><li>Process Control</li><li>Troubleshooting</li><li>Emergency Response Assessment</li><li>Risk Assessment</li></ul><p><strong>Competencies:</strong></p><ul><li>Proficiency in M/S Office</li><li>Procedure Writing</li><li>Information Management</li><li>Fire Equipment Specifying</li><li>Supervisory skills</li><li>Planning &amp; Organizing skills</li><li>Analytical &amp; Observational skills</li><li>Emergency Response Assessment</li><li>Risk Assessment</li><li>Ability to work collaboratively to develop and deliver appropriate solutions.</li><li>Ability to describe personal strengths and development needs.</li><li>Demonstrated ability to cooperate with and influence peers.</li><li>Demonstrated ability to listen and collaborate with others.</li><li>Technical understanding of downstream petroleum industries</li><li>Business understanding of HC (hydrocarbons) marketing and their movements</li><li>Understanding of LP optimization</li><li>Collaborative Approach</li><li>Managing performance</li><li>Exercising influence</li><li>Work Prioritization</li><li>Report Writing</li><li>SOP interpretation</li><li>Terminal operations (Process, Static &amp; Rotating Equipment)</li><li>HSE (Permit to Work PTW, Confined Space, Process Safety, H2S Awareness, Basic Fire Fighting, Emergency Response</li><li>Process Control</li><li>Troubleshooting</li><li>Risk Assessment</li><li>Communication</li></ul><p>Must hold a valid certificate in the following courses according to Association of Fire Chiefs:</p><ul><li>Fire Fighter I and II</li><li>First Aid and Basic Life Support</li><li>ICS 100 and 300</li><li>Incident Safety Officer</li><li>Industrial Fire Fighter</li><li>HAZMAT Operations</li><li>Rope Rescue</li><li>Confined Space Rescue</li><li>Bulk Storage Emergencies</li><li>Fire Inspector</li><li>Fire Instructor I, II</li><li>Fire Officer I, II</li><li>Train the trainer</li></ul>

<p>Supervise the day-to-day Firefighting operations for the assigned site to ensure that work processes are implemented as designed and comply with established standards and procedures. Overview and influencing the teams in order to ensure the optimization of OTTCO s (as a system) in term of safety, environment, production, and margin cost. Coach and mentoring of Firefighting Operators in order to contribute with department on capacity building Processes, and drive the agenda for continuous improvement. Supervises and actively controls all Firefighting operations in close coordination with Unity Team. Developed weekly / monthly reports. Implementation of Incident Command System and competencies. Participate in the development of the emergency response and business continuity plans, continuously update, enhance, review and maintain the plans and pertaining documents to ensure they are up to date. Plan and propose various awareness programs to encourage a work environment that values fire safety. Maintain up to date documentation on SOP s, departmental plans (Emergency Response Plans, Business Continuity plans etc.) for training purposes. Maintain on the ground presence during routine inspections, mock drills, and emergency scenario tests to observe and gather any feedback for improving the fire &amp; safety policies and plans. Initiates emergency response in case of major incidents. Decides and declares type of emergency to ensure that all emergencies are handled in the most effective and safe way. Acts as the Operations Site Coordinator during plant upset / emergency situations. Ensures all operations staff are familiar with their unit emergency procedures. Optimization Reviews and analyses Firefighting parameters and performance and takes necessary action to ensure targets are met with minimum wastage and optimum cost. Works with the unit supervisor to identify and eliminate unplanned flare sources and optimize utility usage. QHSE. risks associated with their risk. Awareness of Emergency preparedness and response measures. Awareness on implications of not conforming to the integrated managements system requirements, including not fulfilling the organization s compliance obligations.</p><p><strong>Desired Candidate Profile</strong></p><h2>QUALIFICATIONS, EXPERIENCE, &amp; SKILLS:</h2><p>Bachelors in Fire &amp; Safety Management or relevant +10 Years of relevant experience in similar role. Exposure to and experience with all fire and safety equipment s used in a refinery or petrochemicals. Demonstrated working experience in: SOP interpretation, Refinery operations (Process, Static &amp; Rotating Equipment), HSE (Permit to Work PTW, Confined Space, Process Safety, H2S Awareness, Basic Fire Fighting, Emergency Response), Process Control Troubleshooting. Emergency Response Assessment, Risk Assessment. Competencies: Proficiency in M/S Office, Procedure Writing, Information Management, Fire Equipment Specifying, Supervisory skills, Planning &amp; Organizing skills, Analytical &amp; Observational skills, Emergency Response Assessment, Risk Assessment. Ability to work collaboratively to develop and deliver appropriate solutions. Ability to describe personal strengths and development needs. Demonstrated ability to cooperate with and influence peers. Demonstrated ability to listen and collaborate with others. Technical understanding of downstream petroleum industries. Business understanding of HC (hydrocarbons) marketing and their movements. Understanding of LP optimization. Collaborative Approach, Managing performance, Exercising influence, Work Prioritization, Report Writing. SOP interpretation, Terminal operations (Process, Static &amp; Rotating Equipment), HSE (Permit to Work PTW, Confined Space, Process Safety, H2S Awareness, Basic Fire Fighting, Emergency Response), Process Control Troubleshooting, Risk Assessment, Communication. Must hold a valid certificate in the following courses according to Association of Fire Chiefs: Fire Fighter I and II, First Aid and Basic Life Support, ICS 100 and 300, Incident Safety Officer, Industrial Fire Fighter, HAZMAT Operations, Rope Rescue, Confined Space Rescue, Bulk Storage Emergencies, Fire Inspector, Fire Instructor I, II, Fire Officer I, II, Train the trainer.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Nama Water Services (Oman Water and Wastewater Services Company) is pleased to announce a "Training for Employment" , in collaboration with its contracted companies that offer permanent job opportunities in the water and wastewater sector. Job Title: Cybersecurity Reports To: IT Manager / Cybersecurity Manager Job Details Number of Vacancies: 3 Positions Salary Range: OMR PHONE_NUMBER per month Work Location: All governorates of Oman except Dhofar (Preference will be given to applicants from the local governorate) Job Purpose The Cybersecurity Engineer is responsible for protecting the organization's information systems, networks, and digital assets from cyber threats. The role involves implementing security controls, monitoring security events, identifying vulnerabilities, and ensuring compliance with cybersecurity standards and best practices.</p><p>Key Responsibilities</p><ul><li>Monitor and analyze security events, alerts, and incidents across the organization's IT infrastructure.</li><li>Implement, configure, and maintain cybersecurity solutions such as firewalls, antivirus systems, endpoint protection, SIEM, and intrusion detection/prevention systems.</li><li>Conduct vulnerability assessments and security audits to identify and mitigate risks.</li><li>Investigate security incidents and coordinate response and recovery activities.</li><li>Develop and maintain cybersecurity policies, procedures, and standards.</li><li>Perform security monitoring and threat analysis to detect potential cyber threats.</li><li>Support the implementation of cybersecurity controls for new projects and systems.</li><li>Ensure compliance with applicable cybersecurity regulations, standards, and company policies.</li><li>Conduct security awareness training and provide guidance to employees on cybersecurity best practices.</li><li>Prepare security reports, risk assessments, and technical documentation.</li></ul><p>Qualifications</p><ul><li>Bachelor s Degree in Cybersecurity, Information Security, Computer Science, Information Technology, Computer Engineering, or a related field.</li></ul><p>Experience</p><ul><li>Practical Experience: 0 (No prior work experience required)</li><li>Internship or academic projects in cybersecurity are an advantage.</li></ul><p>Technical Skills</p><ul><li>Knowledge of cybersecurity frameworks and standards (ISO 27001, NIST, CIS Controls).</li><li>Basic understanding of firewalls, SIEM, IDS/IPS, endpoint security, and vulnerability assessment tools.</li><li>Understanding of network security, operating systems, and cloud security concepts.</li><li>Familiarity with incident response and security monitoring concepts.</li><li>Ability to analyze security logs and reports.</li></ul><p>Soft Skills</p><ul><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and teamwork abilities.</li><li>Ability to work under pressure and respond to security incidents.</li><li>Good organizational and documentation skills.</li><li>Strong attention to detail.</li></ul><p>Working Conditions</p><ul><li>Office-based environment with occasional on-site support activities.</li><li>May require availability during cybersecurity incidents, emergencies, or planned maintenance windows.</li></ul><p>Application Note : The applicant must be a job seeker. The applicant must be an Omani national. For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement. The applicant must not have previously benefited from any training program funded by either the public or private sector. The applicant must have no more than three (3) years of work experience. The applicant must not be more than 38 years of age The closing date is 3rd August 2026.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree in Cybersecurity, Information Security, Computer Science, Information Technology, Computer Engineering, or a related field.</li><li>Practical Experience: 0 (No prior work experience required)</li><li>Internship or academic projects in cybersecurity are an advantage.</li><li>Knowledge of cybersecurity frameworks and standards (ISO 27001, NIST, CIS Controls).</li><li>Basic understanding of firewalls, SIEM, IDS/IPS, endpoint security, and vulnerability assessment tools.</li><li>Understanding of network security, operating systems, and cloud security concepts.</li><li>Familiarity with incident response and security monitoring concepts.</li><li>Ability to analyze security logs and reports.</li><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and teamwork abilities.</li><li>Ability to work under pressure and respond to security incidents.</li><li>Good organizational and documentation skills.</li><li>Strong attention to detail.</li><li>The applicant must be a job seeker.</li><li>The applicant must be an Omani national.</li><li>For applicants with previous work experience, at least three (3) months since their last employment movement recorded in the Ministry of Labour system, as of the date of this announcement.</li><li>The applicant must not have previously benefited from any training program funded by either the public or private sector.</li><li>The applicant must have no more than three (3) years of work experience.</li><li>The applicant must not be more than 38 years of age</li></ul><p></p></section>

<p>We have an opening for an HSSE Engineer with specialized expertise in Process Safety Management (PSM) and Fire safety, along with relevant experience in similar industries and operational environments. Please find below the key requirements and preferences for this role.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Position Requirements</strong></p><br><ul><li><p>PSM background with strong HSE expertise (primary focus)</p></li><li><p>Mechanical Engineering or Fire Safety Engineering qualification preferred</p></li><li><p>Proven experience in a similar role within the petrochemical, polymer, PET, or related process industries</p></li><li><p>Strong knowledge of fixed fire detection and fire protection systems</p></li><li><p>SAP and other relevant software knowledge</p></li><li><p>Experience leading and managing teams</p></li><li><p>Quality-driven mindset with strong operational focus</p></li><li><p>Strong stakeholder management and leadership capabilities</p></li></ul><br><p>Please note that expectations from global, regional, site management, and operations leadership for this role are exceptionally high.</p><br><p><strong>Compensation & Benefits</strong></p><ul><li><p>Salary: Up to <strong>OMR 1,350 per month</strong></p></li></ul><p>Family benefits provided</p>

<p>Job title Sr. Engineer, Technical Safety Grade Stream Operated Assets Function Projects Delivery Engineering Location Oman Muscat / Project Sites Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Manager, Technical Safety Direct Reports - Job purpose Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main Tasks and Responsibilities Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications. Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities. Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation. Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent). Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP. Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects. Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards. Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase. Support the preparation and review of technical documentation for regulatory submissions and engineering authority approvals. Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle. Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes. Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments. Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly. Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture. Perform other related duties as assigned. Key interactions Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function. External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities. Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</li><li>Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (T V or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</li><li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li><li>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</li><li>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</li><li>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</li><li>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</li><li>Exposure to Fire &amp; Gas system design and philosophy development.</li><li>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</li><li>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</li><li>Strong analytical and problem-solving skills.</li><li>Good communication skills, verbal and written.</li><li>Attention to detail and high level of technical accuracy.</li><li>Ability to work effectively in multidisciplinary project teams.</li><li>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</li><li>Ability to manage competing priorities in a project environment.</li><li>Cultural sensitivity in a multinational environment.</li><li>Computer literacy including MS Office and engineering software.</li><li>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</li><li>Quantitative and qualitative risk assessment techniques.</li><li>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</li><li>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</li><li>Fire &amp; Gas detection system design and philosophy.</li><li>Safety Case development and Major Accident Hazard (MAH) management.</li><li>Process safety engineering principles.</li><li>Applicable international standards (API, IEC, NFPA, IP codes).</li><li>Technical documentation and report writing.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong>MEP Supervisor</strong> </p> <p> <strong>Job Summary:</strong> </p> <p>The MEP Supervisor is responsible for overseeing the installation, maintenance, and operations of mechanical, electrical, and plumbing systems on a construction site or within a facility. The role ensures that all MEP works are carried out according to specifications, standards, and project timelines, while coordinating between multiple teams and subcontractors.</p> <p> <strong>Key Responsibilities:</strong> </p> <ul> <li>Supervise and coordinate the work of MEP subcontractors and in-house teams.</li> <li>Review MEP drawings, plans, and specifications to ensure proper execution.</li> <li>Monitor installation progress and ensure compliance with safety, quality, and design standards.</li> <li>Plan and allocate resources to meet project timelines and budgets.</li> <li>Conduct regular inspections and quality checks for all MEP works.</li> <li>Coordinate with architects, structural engineers, and other stakeholders.</li> <li>Troubleshoot and resolve MEP-related issues on-site.</li> <li>Maintain daily reports and documentation of site activities and progress.</li> <li>Ensure that all work complies with local codes, regulations, and industry standards.</li> <li>Participate in testing and commissioning of MEP systems.</li> </ul> <p> <strong>Qualifications:</strong> </p> <ul> <li>Diploma or Bachelor s Degree in Mechanical, Electrical, or related engineering field.</li> <li>Minimum 8+years of experience in a supervisory MEP role in construction or facilities management.</li> <li>Strong knowledge of HVAC, electrical, plumbing, and fire protection systems.</li> <li>Familiarity with AutoCAD, MS Office, and project management tools.</li> <li>Excellent organizational and leadership skills.</li> <li>Strong communication and interpersonal abilities.</li> <li>Knowledge of safety and quality control procedures.</li> </ul> <p> <strong>Preferred:</strong> </p> <ul> <li>Certification in MEP or building services.</li> <li>Experience with large-scale residential, commercial, or industrial projects.</li> </ul></div></section>

<p>Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main Tasks and Responsibilities</strong></p><ul><li>Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications.</li><li>Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities.</li><li>Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation.</li><li>Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent).</li><li>Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP.</li><li>Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects.</li><li>Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards.</li><li>Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase.</li><li>Support the preparation and review of technical safety documentation for regulatory submissions and engineering authority approvals.</li><li>Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle.</li><li>Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes.</li><li>Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments.</li><li>Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly.</li><li>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</li><li>Perform other related duties as assigned.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function.</li><li>External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities.</li></ul><p><strong>Notable Working Conditions.</strong></p><ul><li>Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><ul><li>Required: Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</li><li>Preferred: Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (T V or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</li><li>Language: Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li></ul><p><strong>Background and experience</strong></p><ul><li>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</li><li>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</li><li>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</li><li>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</li><li>Exposure to Fire &amp; Gas system design and philosophy development.</li><li>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</li><li>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</li></ul><p><strong>Competencies and skills</strong></p><ul><li>Soft: Strong analytical and problem-solving skills. Good communication skills, verbal and written. Attention to detail and high level of technical accuracy. Ability to work effectively in multidisciplinary project teams. Self-motivated with a proactive approach to identifying and resolving technical safety issues. Ability to manage competing priorities in a project environment. Cultural sensitivity in a multinational environment.</li><li>Technical: Computer literacy including MS Office and engineering software. Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie). Quantitative and qualitative risk assessment techniques. Consequence modelling tools (PHAST, Safeti, FRED, or equivalent). Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511). Fire &amp; Gas detection system design and philosophy. Safety Case development and Major Accident Hazard (MAH) management. Process safety engineering principles. Applicable international standards (API, IEC, NFPA, IP codes). Technical documentation and report writing.</li></ul>

<p><b>Job purpose</b></p><p><br></p><p>Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework.</p><p><br></p><p>&nbsp;</p><p><br></p><p>The position will act in accordance with the OQEP’s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani’s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><br></p><p><b>Main Tasks and Responsibilities</b></p><p><br></p><p>Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications.</p><p>Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities.</p><p>Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation.</p><p>Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent).</p><p>Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP.</p><p>Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects.</p><p>Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards.</p><p>Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase.</p><p>Support the preparation and review of technical safety documentation for regulatory submissions and engineering authority approvals.</p><p>Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle.</p><p>Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes.</p><p>Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments.</p><p>Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly.</p><p>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</p><p>Perform other related duties as assigned.</p><p>Key interactions</p><p><br></p><p>Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function.</p><p><br></p><p>External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities.</p><p><br></p><p>Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><b><br></b></p><p><b>Education requirements</b></p><p><br></p><p>Required: Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</p><p><br></p><p>Preferred: Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (TÜV or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</p><p><br></p><p>Language</p><p><br></p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p><br></p><p>Background and experience</p><p><br></p><p>Competencies and skills</p><p><br></p><p>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</p><p>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</p><p>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</p><p>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</p><p>Exposure to Fire &amp; Gas system design and philosophy development.</p><p>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</p><p>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</p><p>Soft:</p><p><br></p><p>Strong analytical and problem-solving skills.</p><p>Good communication skills, verbal and written.</p><p>Attention to detail and high level of technical accuracy.</p><p>Ability to work effectively in multidisciplinary project teams.</p><p>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</p><p>Ability to manage competing priorities in a project environment.</p><p>Cultural sensitivity in a multinational environment.</p><p>&nbsp;</p><p><br></p><p>Technical:</p><p><br></p><p>Computer literacy including MS Office and engineering software.</p><p>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</p><p>Quantitative and qualitative risk assessment techniques.</p><p>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</p><p>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</p><p>Fire &amp; Gas detection system design and philosophy.</p><p>Safety Case development and Major Accident Hazard (MAH) management.</p><p>Process safety engineering principles.</p><p>Applicable international standards (API, IEC, NFPA, IP codes).</p><p>Technical documentation and report writing.</p><p>&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provides Fire Services at RPI locations, for the assigned team, under STL Fire Services Shift (A,B,C,D) scope and guidance from Sub-Officer and Snr Firefighters, through (1) Execute assigned tasks, (2) set &amp; implement day-to-day operations including work resource planning, (3) Coordinate site Inspections &amp; Emergency Preparedness, including the inspection programs of all required firefighting equipment, and (4) Carry out Incident control initial assessment of fire threat and possible escalation of hazards to contain any spread of damage to nearby areas; in order to ensure emergency preparedness as well as response to any emergencies at the assigned site and within the assigned shift.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Follow the day-to-day operations related to own jobs in the Fire Services Department to ensure continuity of work</p><p>Lead the fire unit shift personnel.</p><p>Provide technical guidance on work duties and activities.</p><p>Conduct audits/inspections/tests to verify the readiness of all fire protection unit equipment/vehicles and firefighting/protection equipment throughout company.</p><p>Direct firefighter and Fire truck and pumper operators as necessary to ensure quick response to fire incidents.</p><p>Assign firefighters and fire truck operators to regular maintenance schedules such as checking and cleaning fire trucks to ensure a high level of operational readiness. This includes overseeing routine maintenance checks on fire trucks and other firefighting equipment.</p><p>Coordinate the inspection programs of all required firefighting equipment, coordinate all functional tests of fire detection/suppression systems and prepare the required written reports including initial fire/safety emergency reports and other work related issues encountered during the shift.</p><p>Respond to all fire/emergency alarms in expedient/efficient manner and assist Fire Team to implement the correct fire protection/prevention measures as instructed by TL Fire Services</p><p>Track defective equipment notifications with equipment owners and ensure equipment is repaired according to priority ratings.</p><p>Allocate firemen to attend preventative maintenance on fire equipment by maintenance department on a daily basis</p><p>Carry out initial assessment of fire threat and possible escalation of hazards to contain any spread of damage to nearby areas.</p><p>Communicate by radio with all relevant senior firefighter, Firefighters and control room operators as first responders to a fire scene, test at the appropriate place to be well prepared for the fire accident as instructed by the team leader.</p><p>Instruct security personnel/ fire officers to clear site of civilians and hazardous materials to prevent escalation of fire incident.</p><p>Train various personnel on their roles during incidents.</p><p>Provide Fire Services Team with recommendations for improving fixed fighting/ protection installations and fire protection/detection equipment for existing, new and modified facilities.</p><p>Key interactions</p><p>Internal: Liaise with the colleagues and stakeholders for day-to-day work</p><p>External: Acts as liaison between Government offices, Society committee etc.</p><p>Notable Working Conditions. Field Operations and office environment, Moderate to intensive computer screen use. (Shift)</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Qualifications for this position is Higher national Diploma in Fire Safety Management/ Diploma in Fire Safety Management with Fire Officer Course or similar.</p><p>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</p><p>Diploma Firefighter &gt;2 years of relevant experience</p><p>General Knowledge of industry preferable in Refinery, Petrochemical and Petroleum processes.</p><p>Fundamentals of HSSE - Comprehensive knowledge of occupational health &amp; safety. Detailed understanding of general industry standards and the requirements of the more frequently referenced standards</p><p>General knowledge of basic health and safety concepts such as hazard and risk assessment, personal protective equipment, Root cause analysis, behavior-based safety, machine/ equipment safety, confined space entry among others.</p><p>Knowledge of HSSE Management System.</p><p>Knowledge of risk management methods and practices.</p><p>Knowledge of HAZOP or similar studies.</p><p>Knowledge of Omani and International Environmental Standards and regulations.</p><p>Obtain National Fire Protection Association</p><p>(NFPA) courses</p><p>Soft:</p><p>Self-motivated and uses initiative and judgment to attain the best results.</p><p>Demonstrates a high level of personal integrity.</p><p>Establishes priorities and works with minimal direction.</p><p>Participates in proactive team efforts to achieve departmental goals.</p><p>Technical:</p><p>Ability to prepare, update and draft policies, procedures and guidelines</p><p>Having Heavy Driving License.</p><p>Demonstrates a personal commitment to health, safety and responsible environmental management.</p><p>Subject to on-call coverage</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Require Mechanical Engineer and Gas and Pipe Fitting Technician for Oil and Gas Company in Oman. Gas Technician should know LPG Fitting and Maintenance. Interested candidates Please email your CV on EMAIL_ADDRESS</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Require Mechanical Engineer and Gas and Pipe Fitting Technician for Oil and Gas Company in Oman. Gas Technician should know LPG Fitting and Maintenance.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Summary Engineering Graduate with minimum 8-10 years of relevant experience in managing major turnkey EPC security projects, responsible for cost/budget control and schedule control.</p><p>Key Job responsibilities and duties</p><ul><li>Manage the assigned project operations completely from Project Initiation to financial sign-off.</li><li>Contract Owner of assigned projects and responsible for cost/budget control and schedule control.</li><li>Generating revenues from project variations and improve project margin.</li><li>Responsible for resolving all project constraints and resource management as required.</li><li>Responsible to achieve and improve the Project Schedule and successful financial closure on-time in meeting project objectives to its full specifications.</li><li>Responsible for timely procurement and maintaining the procurement tracker effectively.</li><li>Proper and timely coordination with vendor, supplier and subcontractors.</li><li>Responsible for project delivery in all aspects as per contract requirements by following Project management procedures and scope agreed.</li><li>Responsible for industrial standard and fault free installations.</li><li>Following high quality standards in project execution.</li><li>Responsible to maintain the project in positive cash flow at all the time.</li><li>Responsible for successful completion of the project, in meeting the project performance to its specifications and project contractual requirements and client obligations for the assigned projects.</li><li>Responsible to maintain the project documentation as per the standards.</li><li>Responsible to manage the project cash flow positively.</li><li>Preparation &amp; Submission of project documents like Project presentation reports, Resource Plan, Invoice plan, Commercial register etc, Preparation of Weekly, monthly report.</li><li>Preparation of required PPT for project execution with required bar charts.</li><li>Responsible for invoice claims on time, client approvals &amp; payment realization as per the terms, Receivable follow-up with client and all relevant parties within the team for the assigned projects.</li><li>Ensure the client satisfaction throughout the project phase.</li><li>Proper coordination with support team like Admin, Account &amp; finance, logistics for project requirements.</li><li>Verifying and certifying the subcontractor &amp; supplier invoices timely.</li><li>Managing operations without bad debts and LD clause applied as per budget allowed.</li><li>High QHSE standards and meeting the set targets, Adhere to all set policies and standards.</li><li>Responsible for the Contractual Performance of the assigned projects in all aspects.</li></ul><p>Deliverables</p><ul><li>Successful Project completion &amp; handover, within budget and time, and with effective utilization of resources.</li><li>Highest Q.HSE Records with high rankings on project audit and customer feedback reports.</li><li>High rankings on project Quality audit and customer feedback reports.</li><li>Effective communication and reporting.</li><li>Maintain Positive Project cash flow.</li><li>System performance to its specifications and project requirements.</li><li>Generating revenues and improving the project margins.</li><li>Timely invoicing and payment collection</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Qualification - Professional Engineering Graduate in Electrical, Electronics, Instrumentation, Communication, IT</li><li>Experience - Engineering Graduate with minimum 8-10 years of relevant experience in managing major turnkey EPC security projects.</li><li>Preferred Experience of 4-5 years in Middle East region &amp; having valid Oman driving license.</li><li>2-3 year Oil &amp; Gas Industrial security projects experience, atleast in 1 major Oil &amp; Gas (Or) Petrochemical EPC Security projects as Project Engineer position.</li><li>Each project must be minimum value of 5m US$.</li><li>Integrated Security package (duration not less than 1 year).</li><li>The ELV products include Industrial &amp; Commercial CCTV, Integrated high end Access Control, Fire Alarm, Fire Fighting, Intruder Alarm, PAVA systems, Physical Control Equipment, PIDS, BMS, Telecom, A/V systems, ISMS, SMATV, VDP, Gate Automation &amp; residential systems, etc.</li><li>In addition, the incumbent MUST have related in-depth knowledge on IT &amp; Telecom systems inclusive of database management, Fiber systems, Server &amp; Storage systems, Active &amp; passive components, operating systems, IP domain, redundancy operations in connection with ELV systems specified above.</li></ul><p></p></section>

<p><br></p><p>Welding Engineer - Job Description</p><p>Job Title: Welding Engineer</p><p>Job Summary: A Welding Engineer is responsible for planning, developing, supervising, and improving welding processes to ensure the quality, safety, and efficiency of fabrication and construction activities. They ensure compliance with industry standards, project specifications, and quality requirements in manufacturing, oil &amp; gas, construction, power, and infrastructure projects.</p><p>Key Responsibilities</p><ul><li>Develop, review, and approve Welding Procedure Specifications (WPS) , Procedure Qualification Records (PQR) , and Welder Qualification Records (WQTR/WPQ) .</li><li>Monitor and control welding activities to ensure compliance with project specifications, codes, and standards (ASME, AWS, API, ISO, EN, etc.).</li><li>Provide technical support and guidance to welders, supervisors, inspectors, and project teams.</li><li>Evaluate welding techniques, materials, consumables, and equipment for suitability and efficiency.</li><li>Investigate welding defects, failures, and non-conformities and implement corrective actions.</li><li>Coordinate with Quality Control (QC), Non-Destructive Testing (NDT), and production teams.</li><li>Review engineering drawings, material specifications, and fabrication requirements.</li><li>Ensure proper implementation of welding procedures and heat treatment requirements.</li><li>Conduct welding procedure qualification tests and welder performance qualification tests.</li><li>Monitor productivity, welding parameters, consumable usage, and project schedules.</li><li>Ensure compliance with safety regulations and environmental requirements.</li><li>Prepare technical reports, welding documentation, and inspection records.</li></ul><p>Required Qualifications</p><ul><li>Bachelor's Degree in Mechanical Engineering , Welding Engineering , Metallurgical Engineering, or related field.</li><li>Professional certifications such as:</li><ul><li>AWS Certified Welding Inspector (CWI) (preferred)</li><li>International Welding Engineer (IWE) (preferred)</li><li>CSWIP 3.1/3.2 (advantageous)</li></ul><li>Knowledge of international codes and standards:</li><ul><li>ASME Section IX</li><li>ASME B31.3/B31.1</li><li>AWS D1.1</li><li>API 1104</li><li>ISO 3834</li></ul></ul><p>Required Skills</p><ul><li>Strong knowledge of welding processes:</li><ul><li>SMAW</li><li>GTAW (TIG)</li><li>GMAW (MIG)</li><li>FCAW</li><li>SAW</li></ul><li>Understanding of metallurgy and heat treatment.</li><li>Knowledge of NDT methods (RT, UT, MT, PT).</li><li>Ability to interpret engineering drawings and specifications.</li><li>Root cause analysis and problem-solving skills.</li><li>Strong communication and leadership abilities.</li><li>Proficiency in MS Office and welding management/documentation systems.</li></ul><p>Experience Requirements</p><ul><li>5-10+ years of experience in welding engineering, fabrication, construction, or oil &amp; gas projects.</li><li>Experience in pressure vessels, pipelines, structural steel, tanks, or process piping projects.</li><li>Familiarity with EPC projects and quality management systems.</li></ul><p>Key Performance Indicators (KPIs)</p><ul><li>Welding rejection/repair rate.</li><li>Productivity and welding efficiency.</li><li>Compliance with project quality requirements.</li><li>Number of qualified welders and procedures.</li><li>Safety performance and incident reduction.</li><li>On-time completion of welding activities.</li></ul><p>Reporting Structure</p><p>Reports To: QA/QC Manager, Fabrication Manager, Construction Manager, or Project Manager</p><p>Supervises: Welding Supervisors, Welders, Welding Technicians, and Welding Inspectors (as applicable).</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Mechanical Engineering , Welding Engineering , Metallurgical Engineering, or related field.</li><li>Professional certifications such as:<ul><li>AWS Certified Welding Inspector (CWI) (preferred)</li><li>International Welding Engineer (IWE) (preferred)</li><li>CSWIP 3.1/3.2 (advantageous)</li></ul></li><li>Knowledge of international codes and standards:<ul><li>ASME Section IX</li><li>ASME B31.3/B31.1</li><li>AWS D1.1</li><li>API 1104</li><li>ISO 3834</li></ul></li><li>Strong knowledge of welding processes:<ul><li>SMAW</li><li>GTAW (TIG)</li><li>GMAW (MIG)</li><li>FCAW</li><li>SAW</li></ul></li><li>Understanding of metallurgy and heat treatment.</li><li>Knowledge of NDT methods (RT, UT, MT, PT).</li><li>Ability to interpret engineering drawings and specifications.</li><li>Root cause analysis and problem-solving skills.</li><li>Strong communication and leadership abilities.</li><li>Proficiency in MS Office and welding management/documentation systems.</li><li>5-10+ years of experience in welding engineering, fabrication, construction, or oil &amp; gas projects.</li><li>Experience in pressure vessels, pipelines, structural steel, tanks, or process piping projects.</li><li>Familiarity with EPC projects and quality management systems.</li></ul>

<p>Supervise and manage daily electrical installation activities at the project site. Ensure electrical works are executed according to approved drawings, specifications, method statements and project schedules. Read and interpret: Electrical layouts Single Line Diagrams (SLD) Load schedules Shop drawings Cable schedules Equipment specifications Supervise installation of: LV/MV electrical systems Power distribution systems Lighting and emergency lighting Cable trays and conduits Distribution boards and MCCs Earthing and lightning protection Generators and transformers Fire alarm and ELV systems Coordinate with consultants, clients, project managers, civil/MEP teams, subcontractors and suppliers. Inspect materials delivered to site and verify them against approved material submittals. Prepare and submit Material Inspection Requests (MIR), Inspection Requests (IR), method statements and technical submittals. Monitor manpower, materials and equipment required for electrical works. Conduct regular site inspections and identify installation defects or non-conformities. Ensure electrical works comply with applicable local authority requirements, project specifications and safety standards. Monitor project progress and prepare daily/weekly/monthly progress reports. Coordinate electrical works with civil, mechanical, HVAC, plumbing and architectural activities. Assist in cable testing, insulation resistance testing, continuity testing and other electrical tests. Support testing, commissioning, energization and project handover. Troubleshoot electrical installation problems and provide practical engineering solutions. Maintain as-built drawings, inspection records, test reports and other project documentation. Ensure proper implementation of HSE requirements, permit-to-work procedures and electrical safety practices.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualification :</strong> 1. B.Tech - Electrical Engineer 2. Valid Passport</p><p><strong>Age Limit :</strong> Max 40 years.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Graduate Electrical Engineer or I&amp;amp;C with 7-10 years of experience in estimation of <br><br>EPC/Turnkey projects, should estimate projects related to Electrical, Instrumentation<br><br>&amp;amp; Control, process equipment installations, controls system upgrade, PLC/SCADA,<br><br>Cable installation, MCC, VFD, Switch gear installation and related scope of work.<br><br>Estimation of Saudi Aramco, SABIC projects shall be added advantage.<br><br>Graduate Mechanical Engineer with 7-10 years of experience in estimation of <br><br>EPC/Turnkey projects, should estimate projects related to Oil &amp;amp; gas pipeline<br><br>installation, process equipment installations, Tanks, structure installation and related<br><br>scope of work. Estimation of Saudi Aramco, SABIC projects shall be added<br><br>advantage<br><br></span><br><span>RequirementsEstimation Engineer (Mechanical)<br><br>Estimation Engineer (Electrical/I&amp;C)<br><br></span><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Free Recruitment We are hiring for Leading Oil &amp; Gas Company - Oman</p><p style="font-size: 11px;">To execute all electrical Protection preventative and corrective activities (if any), all electrical protection relays, schematic checks, CT and VT testing. Report to the Supervisor in relevant operational area The candidate shall be possessing minimum a degree, or equivalent, from a recognised university in electrical engineering. Any additional qualification in Electrical protection system is preferable. He shall have understanding of electrical protection setting calculations, short circuit studies, CT calculations etc. He shall have a good knowledge of control and protection schemes including trouble shooting. He shall have worked / be capable of working with all makes of numerical relays in addition to electro-mechanical and static types. This shall be verified during interview and practical test.</p><p style="font-size: 11px;">Minimum 10 years experience in a reputed firm(s) in electrical engineering works. Out of the 10 years he shall possess at least 3 years experience in testing and commissioning of protection system including trouble shooting. Experience in testing and commissioning of large gas turbine power stations, high voltage transmission system, and high voltage substations etc. is a must, as appropriate for the certification category requested. He should have a good knowledge of latest electrical protection relays and testing equipment. The individual shall possess PDO AEP (Authorised Electrical Person) authority certificate after successfully undergoing LV and HV ESR courses. He shall be well versed with PDO Electrical Safety Rules &amp; Electrical Safety Operating Procedures and electrical permit system. He should also be familiar with PDO Health Safety &amp; Environment (HSE) rules and specifications. The above condition of having AEP certificate can be relaxed if he is accompanied by an AEP, as defined in the ESR and ESOP for the following cases:</p><ul style="font-size: 11px;"><li style="font-size: 11px;">Relay Vendor engineer carrying out testing own make relays</li><li style="font-size: 11px;">Contractors testing engineer with project specific basis approval</li></ul><div><span style="font-size: 11px;"><br></span></div><div><div style=""><span style="font-size: 11px;">Role: Electrical Engineer</span></div><div style=""><span style="font-size: 11px;">Industry Type: Recruitment / Staffing</span></div><div style=""><span style="font-size: 11px;">Department: Construction &amp; Site Engineering</span></div><div style=""><span style="font-size: 11px;">Employment Type: Full Time, Permanent</span></div><div style=""><span style="font-size: 11px;">Role Category: Construction Engineering</span></div><div style=""><span style="font-size: 11px;">Education</span></div><div style=""><span style="font-size: 11px;">UG: B.Tech / B.E. in Electrical and Electronics Engineering (EEE), Electrical</span></div></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>

<p>We are excited to announce a new luxury Nikki Beach Resort &amp; Spa project in Yiti Bay, Sultanate of Oman, and we are looking for a seasoned Director of Maintenance &amp; Conservation to join our pre-opening leadership team. This is a unique opportunity to be part of a landmark development from the ground up, shaping the engineering and facilities function from pre-opening through to full operations. The ideal candidate is a hospitality engineering leader with a strong technical background, excellent organizational skills, and proven experience in pre-opening resort or hotel projects.</p><p><b>Key Responsibilitie</b>s:</p><ul><li>Lead all engineering, maintenance, and technical operations during the pre-opening phase and beyond.</li><li>Work closely with the construction, design, and project teams to ensure engineering standards and systems are aligned with brand and safety requirements.</li><li>Develop and implement preventive maintenance schedules and engineering policies for all areas of the resort (HVAC, electrical, plumbing, water treatment, fire safety systems, etc.).</li><li>Hire, train, and manage the engineering team to ensure smooth operations from day one.</li><li>Oversee energy management, sustainability efforts, and regulatory compliance.</li><li>Manage budgets, equipment procurement, and contractor/vendor relationships.</li><li>Support risk management initiatives, emergency preparedness, and workplace safety.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 8 10 years of experience in engineering or technical services within the hospitality industry.</li><li>At least 3 years in a leadership role, preferably as Director of Engineering or Chief Engineer.</li><li>Pre-opening experience in resorts or hotels is highly preferred.</li><li>Prior work experience in Oman is an advantage</li><li>Strong knowledge of building systems, mechanical/electrical infrastructure, and health &amp; safety standards.</li><li>Ability to read and interpret blueprints and technical documents.</li><li>Proven ability to lead diverse teams and work collaboratively with various departments.</li><li>Excellent communication, leadership, and problem-solving skills.</li><li>Degree or diploma in Engineering, Facilities Management, or a related field.</li></ul>

<p><strong>Position Title:</strong> Mechanical Engineer</p><p><strong>Location</strong>: GCC (Project-Based)</p><p><strong>Availability</strong>: Immediate joiners preferred (candidates from India or home country are also welcome)</p><p><br></p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Execute Mechanical works at site for hotel and commercial building projects.</p></li><li><p>Ensure project activities are carried out as per approved drawings, specifications, and timelines.</p></li><li><p>Coordinate with contractors, subcontractors, and other stakeholders for smooth execution.</p></li><li><p>Monitor daily site activities and ensure quality, safety, and compliance standards are maintained.</p></li><li><p>Prepare site reports, progress updates, and documentation.</p></li><li><p>Identify and resolve technical issues during project execution.</p></li></ul><p><br></p><p><strong>Requirements:</strong></p><ul><li><p><strong>Experience:</strong> 8 to 11 years in MEP site execution.</p></li><li><p><strong>Project Background:</strong> Must have experience in hotel or commercial building projects only.<br><em>(Candidates with infrastructure, oil & gas, or energy project experience will not be considered.)</em></p></li><li><p><strong>Role Experience:</strong> Must be working as a Site Execution Engineer.<br><em>(Candidates from maintenance or commissioning backgrounds are not suitable.)</em></p></li><li><p><strong>Location Experience:</strong> Mandatory GCC experience.</p></li><li><p><strong>Education:</strong> Bachelor’s Degree or Diploma in Mechanical/Electrical Engineering.</p></li><li><p><strong>Availability:</strong> Must be immediately available to join.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>-</p>

<p><strong>Job Summary:</strong> Experience: Minimum 7 Years experience as Product Engineer Education: Bachelor of Engineering or Geoscience Product Engineer supports the Sales and Operations goals by providing technical support as requested to enable the segment to plan, design, execute and evaluate SLB products and services we provide to our Clients. A principal role of the Product Engineer is to ensure that our products are competitive and reliable in the market and that we understand the performance expectations and make up of that market. The Product Engineer should have the capability to design bit based on the inputs of the formation evaluation /offset wells/ Temp profile/UCS /geomechanics and other main inputs . The role is responsible for communicating the technical differentiation of our various drilling products and services over those of the competition in the field. The Product Engineer understands both the technology and its value and is a technical bridge between the client organization and the segment. The Product Engineer is the enabler and driver of new technology opportunities through solution-driven client and engineering engagement. The Product Engineer should provide flawless Service Quality and ensure compliance with all SLB Standards.</p><p><strong>Essential Responsibilities and Duties:</strong></p><p><strong>Technical Sales Support:</strong> Provides technical support to the sales organization and to clients. Assist with Engineering prototype applications and New Technology (NT) market introductions Drive New Technology (NT) sales and provides technical sales support for opportunities identified by front line sales team in the location. Perform internal and external marketing activities such as technology presentations, lunch and learns, workshops, and technology launches. Develop appropriate relationships with key senior technical personnel within the client s organization by becoming a Technical Reference/Advisor.</p><p><strong>Application Analysis and Sales Development:</strong> Analyze, benchmarks and evaluates product performance to ensure a competitive position is maintained and initiates new or modified design requests to meet the operational goals of the geography Assist with field based Applications Analysis (modeling &amp; simulation) to enable Operations to effectively sell our Products and Services with a differentiable advantage. Deliver Real-Time parameter monitoring as required to support execution.</p><p><strong>Technical Leadership:</strong> Create Technical Papers, Case Studies and capture Lessons Learned into InTouch based on the experiences of the GeoMarket or location. Be active in Technical Society through publishing of technical papers, participating in SLB Symposia, participating in Industry events. Contribute to the competency development of the Engineering Support group while mentoring and coaching less experienced engineers in the location.</p><p><strong>Q&amp;HSE:</strong> Investigate unusual or unsatisfactory product performance to rapidly determine root cause and preventative action. Participate in internal product quality reviews with Reliability, Engineering and Sustaining. Communicate PQ Root Cause Analysis and preventative action outcomes to customers as requested by Sales. Conduct audits and inspections as requested or scheduled. Complies with all Company &amp; Regulatory HS&amp;E &amp; Quality and IT standards and policies. Wears all Personal Protective Equipment (PPE) as required &amp; maintains required HS&amp;E &amp; SQ certifications up-to-date.</p><p><strong>Formal Job Training Covering the below Topics:</strong></p><ul><li>Technical Job Design &amp; execution for retrievable and directional casing drilling</li><li>Technical Job Design &amp; execution or non-directional casing drilling</li><li>Turbodrilling technical job design and execution for hard drilling rocks</li><li>Technical Bore Hole Enlargement for Job designing and troubleshooting</li><li>Technical Bore Hole Enlargement for operation and execution</li><li>Cross Training sales for Fishing and Remedial tools</li><li>Cross training sales for Wellbore departure and whipstocks tools</li><li>Cross Training sales for impact jars and shock subs</li><li>Cross Training sales for Bore hole enlargement</li><li>Drilling Bits</li><li>Product development and Advanced Drilling Engineering</li></ul><p><strong>Behavior:</strong></p><ul><li>Relationship builder Internally and with Clients</li><li>Strong verbal and written communicator</li><li>Team player</li><li>Innovative</li><li>Objective</li><li>Leader</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Experience: Minimum 7 Years experience as Product Engineer Education: Bachelor of Engineering or Geoscience</p>