Cyber Security Engineer Jobs in Oman

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wet Utilities Design Engineer will be responsible for designing water supply, firefighting, irrigation, stormwater, and wastewater networks in accordance with Oman authority standards. The role requires strong technical skills in hydraulic design, preparation of construction documentation, and coordination with multidisciplinary teams. This position is ideal for an engineer with around 5 years of experience in wet utilities design for infrastructure or development projects.</p><p>Prepare detailed designs for water supply, TSE/irrigation, wastewater, and stormwater networks in line with Oman authority regulations. Develop hydraulic calculations, pipe sizing, network modeling, and design layouts using relevant engineering software. Prepare drawings, design reports, BOQs, technical notes, and specifications for tender and construction phases. Coordinate with civil, structural, and other engineering disciplines to ensure seamless integration of wet utility systems. Review topographical surveys, hydrological studies, and geotechnical data to inform design decisions. Conduct wet utility network modeling (e.g., EPANET, WaterCAD, SewerCAD, StormCAD or equivalent). Liaise with Oman authorities (e.g., PAEW/MADAYN/Municipality) for design submissions, approvals, and technical clarifications. Perform site visits to gather design inputs and verify existing utility conditions. Support senior engineers in value engineering, design validation, and optimization efforts. Respond to technical queries from contractors, clients, and project stakeholders during construction or permitting stages.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in Civil Engineering, Environmental Engineering, or a related field. Minimum 5 years of experience in wet utilities design, preferably within infrastructure or urban development projects. Strong understanding of Oman authority standards for water supply, sewerage, stormwater, and irrigation systems. Proficiency in design and modeling tools such as AutoCAD, Civil 3D, WaterCAD, SewerCAD, StormCAD, EPANET, or similar. Good understanding of hydraulic principles, pipe material specifications, manhole design, and pumping system basics. Experience preparing design documentation, reports, and BOQs. Strong communication and coordination skills with multidisciplinary teams. GCC experience and a valid driving license are advantageous. Professional memberships or relevant certifications are a plus.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Ingénieur-e système - Expert opérationnel hélicoptère F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Vous êtes passionné-e par les nouvelles technologies et avez envie de partager votre expérience en vue d'anticiper les besoins futurs des forces armées.<br>Au sein de l'équipe R&amp;D de l'unité d'ingénierie Digital Solutions &amp; Security, vous serez accueilli-e par la direction d'Ingénierie Logicielle qui développe et conçoit des systèmes d'information opérationnels et logiciels certifiés.<br>Vous rejoindrez l'équipe R&amp;D Digital solutions &amp; Security pour mettre à profit votre expérience technico-opérationnel de pilote hélicoptère dans l'élaboration des évolutions des systèmes de préparations et conduite missions présentes et futures.<br>A ce titre :<br>Vous serez l'interface métier du client :<br>• pour le recueil de besoin et la réalisation des spécifications détaillées ou l'analyse de faits techniques remontés par le client.<br>• lors des points de visibilités en Usine, des recettes Usine et des phases d'essais et de qualification d'une nouvelle version.<br>Vous interviendrez en support des équipes :<br>• de développements notamment pour la déclinaison des exigences systèmes et métiers.<br>• de Validation notamment pour la validation des Plans de tests et procédures <br>Vous assurerez les présentations produit aux clients et lors des salons</p><br><br><p>Connaissance parfaite de la Pmiss MPME<br>Dés déplacements ponctuels en France et à l'étranger sont à prévoir.</p><br><br><p>Ancien-ne pilote d'hélicoptère militaire, vous avez idéalement une expérience en état-major.<br>Vous aimez la technique et êtes à l'écoute des évolutions technologiques.<br>Doté-e de bonnes capacités rédactionnelles pour la rédaction des documents fonctionnels (spécifications, cahier de tests), vous savez également prendre de la hauteur vis à vis du besoin client en collaborant étroitement avec les équipes d'architectes logiciels et de développeurs afin d'appréhender la faisabilité technique des solutions imaginées pour répondre aux nouveaux besoins.<br>Votre aimez trouver des solutions à des problèmes complexe et êtes force de proposition.<br>Idéalement Réserviste pour garder la vision du terrain<br>• Rigueur, méthode et autonomie dans la gestion des tâches complexes<br>• Capacité d'analyse et de synthèse<br>• Pédagogue<br>• Sens de la communication <br>• Respect strict des règles de confidentialité et de sécurité<br>• Français courant, anglais courant<br></p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Alternance Administrateur Réseaux et Systemes F/H</p><br><br><p>Alternance</p><br><br><p>12 / 24 mois</p><br><br><p>Etudiant</p><br><br><p>Temps complet</p><br><br><p>Maintien en condition opération des équipements Réseaux HP / CISCO<br>Participer aux projets RUN Networks</p><br><br><p>volontaire<br>disponible<br>curieux</p><br><br><p>En alternance BAC+2 / +3</p><br><br><br> </div>

<p>JOB CONTENT </p> <p>Ensures the reliability, availability, and performance of OETC s assets. This role involves developing and optimizing maintenance plans using CMMS and leveraging data from the online condition monitoring system. The engineer ensures alignment with global best practices, including ISO 55001, and collaborates with cross-functional teams to address asset performance issues and enhance maintenance strategies</p> <p> Assist with the development of Asset Performance Framework, Strategies, Objectives, Plans, and Asset Risk Register.</p> <p> Develop, upload, and manage annual maintenance plans in the CMMS, utilizing historical data and asset performance trends to optimize reliability and minimize downtime</p> <p> Assist in the development and implementation of best-practice asset management standards, policies, and procedures in line with ISO 55001 and other global standards</p> <p> Review, validate, and update work orders in the CMMS to ensure accuracy, completeness, and compliance with maintenance schedules</p> <p> Identify and address missing, overdue, or incomplete work orders, ensuring data integrity and timely execution of maintenance tasks</p> <p> Monitor the execution of maintenance activities to ensure compliance with approved plans, schedules, and quality standards</p> <p> Follow up on incomplete or delayed maintenance tasks, coordinating with relevant teams to resolve issues and minimize disruptions</p> <p> Prepare and present maintenance progress reports, highlighting key achievements, challenges, and areas for improvement</p> <p> Work closely with relevant departments, including operations, performance engineering, and field teams, to ensure effective maintenance planning and execution</p> <p> Ensure seamless integration of OLCM data with the CMMS to enable data-driven decision-making</p> <p> Collaborate with performance engineers to analyze asset performance data, identify reliability and asset health risks, and provide input to develop proactive and targeted maintenance strategies</p> <p> Highlight performance-related concerns and incorporate them into maintenance plans to address potential risks and improve asset reliability</p> <p> Provide feedback to performance engineers on maintenance outcomes to support continuous improvement and innovation in asset management practices</p> <p> Contribute to continuous improvement initiatives by identifying opportunities to enhance maintenance planning, execution, and asset performance</p> <p> Contribute to the preparation of business and work plans to achieve technical deliverable</p> <p> Manage and review critical spares requirements, coordinating with procurement and inventory teams to ensure the timely availability of resources, tools, and spare parts, minimizing downtime during maintenance activities</p> <p> Contributes to continuous improvement and innovation in optimized asset maintenance plans.</p> <p> Adhere to the Company s health, safety, environmental and security policies always and immediately report violations of these policies to OETC health, safety &amp; environment representatives;</p> <p> Knowledge and Understanding of Asset Management, HSE Management System and IT Security Standard Requirements according to ISO55001, ISO 14001, ISO45001 and ISO 27001 to carry out the assigned duties as per the roles and responsibilities matrix.</p> <p>Job Qualifications and Experience</p> <p>Minimum Qualifications</p> <p> Bachelor s degree in electrical Power Engineering or equivalent </p> <p>Professional Experience </p> <p> 5+ years business experience in the utility of Transmission business</p> <p> </p> <p> </p>

<p><strong>Position Summary</strong></p><p>The Site Engineer will be responsible for the day-to-day execution, management, and supervision of potable water pipeline construction activities.&nbsp;</p><p>The successful candidate must demonstrate the ability to operate independently on-site, managing field resources, tracking daily progress, and overcoming construction challenges with minimal supervision.&nbsp;</p><p>This role requires seamless communication and reporting to the Project Manager to ensure project deliverables are achieved safely, on schedule, within scope, and in strict compliance with engineering specifications.</p><p><strong>Key Responsibilities</strong></p><p>Site Management &amp; Execution</p><ul><li>Supervise and drive the daily construction activities of potable water pipeline installations, including excavation, pipe laying, jointing, thrust block construction, backfilling, and compaction.</li><li>Manage onsite sub-contractors, laborers, plant machinery, and material resources individually to ensure efficient field workflows.</li><li>Conduct field inspections to verify that all work aligns with approved engineering drawings, method statements, and structural parameters.</li><li>Direct pressure testing, hydrotesting, flushing, and disinfection protocols for newly laid potable water pipelines before commissioning.</li></ul><p>Reporting &amp; Project Coordination</p><ul><li>Coordinate closely with the Project Manager to track project timelines, resource allocations, and budget milestones.</li><li>Generate and submit precise daily, weekly, and monthly site progress reports, documenting work completed, delays, equipment utilization, and labor hours.</li><li>Act as the primary onsite point of contact, resolving field issues independently while escalating complex variations or delays to the Project Manager immediately.</li><li>Liaise with client representatives, consultants, and local authorities during routine site inspections and quality sign-offs.</li></ul><p>Quality Assurance &amp; Safety Compliance</p><ul><li>Maintain strict quality control metrics over all incoming pipeline materials, ensuring proper handling and storage of pipes, valves, and fittings.</li><li>Implement and enforce all company Health, Safety, and Environment (HSE) policies onsite, targeting zero incidents.</li><li>Ensure accurate site surveying, alignment verification, and the preservation of levels as dictated by the design specifications.</li></ul><p><strong>Requirements &amp; Qualifications</strong></p><p>Experience &amp; Education</p><ul><li><strong>Minimum Experience:</strong> 5+ years of verified site engineering experience dedicated to pipeline infrastructure works, specifically focused on potable water transmission and distribution networks.</li><li><strong>Education:</strong> Bachelor’s Degree or Diploma in Civil Engineering, Mechanical Engineering, or a closely related construction discipline.</li><li><strong>Technical Knowledge:</strong> Deep familiarity with water pipeline materials (such as DI, HDPE, PVC, and Carbon Steel), jointing techniques, valve chambers, testing mechanisms, and standard utility standards.</li></ul><p>Key Competencies</p><ul><li><strong>Autonomy:</strong> Proven ability to manage a construction site individually, handle rapid decision-making under pressure, and drive productivity independently.</li><li><strong>Software Proficiency:</strong> Basic proficiency in AutoCAD for checking layout designs and MS Office (Excel, Word) for administrative reporting.</li><li><strong>Communication:</strong> Strong interpersonal and report-writing skills to build working relationships across sub-contractors and project executives.</li></ul><p>Preferred Assets (Added Advantage)</p><ul><li><strong>Driving License:</strong> Possession of a valid, active driving license is highly preferred and considered a significant advantage for field mobility across site segments.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Our Client in Muscat is looking to onboard two Full-Stack Software Engineers on a full-time, on-site basis at their headquarters. This is a 2-year outsourcing contract, with engineers working Sunday through Thursday, 8:00 AM to 5:00 PM. Remote work is not permitted unless approved in writing by management. Both engineers will work under direct client supervision, contributing to the analysis, development, maintenance, testing, and improvement of judicial and administrative systems, e-government portals, and digital services including integration with national government platforms. The work environment is high-security, requiring candidates to sign NDAs prior to joining and pass a background/security clearance before commencement.</p><p>What You Will Work On</p><ul><li>Judicial management systems and case-tracking platforms</li><li>Administrative portals and internal e-services</li><li>Integration layers with Oman government systems (REST / SOAP)</li><li>Mobile applications for field and internal use</li><li>Database performance tuning (SQL Server &amp; Oracle)</li><li>Security-hardened features aligned to Oman's national cybersecurity framework</li></ul><p><b>Day-to-Day Responsibilities</b></p><ul><li>Analyse functional &amp; technical requirements and translate them into implementable designs</li><li>Develop and maintain web apps using .NET Framework / .NET Core / MVC / WebForms</li><li>Build front-end interfaces using Angular or React</li><li>Develop web services and API integrations (REST/JSON and SOAP/XML)</li><li>Manage and optimise Oracle and SQL Server databases (queries, stored procedures)</li><li>Develop or maintain mobile applications using Flutter or React Native when required</li><li>Execute unit, integration, and UAT testing before every release</li><li>Prepare and update technical documentation (specs, install guides, API docs, knowledge transfer)</li><li>Support deployment, release management, and rapid incident resolution</li><li>Participate in code reviews; implement security and performance recommendations</li><li>Comply fully with client tools, methodologies, and internal procedures</li></ul><p>Deliverables</p><ul><li>Production-ready or test-ready applications and enhancements per the approved plan</li><li>Documented source code committed to client-approved repositories</li><li>Weekly task logs, monthly progress reports, and incident/resolution records</li><li>Technical analysis, design, API, and deployment documentation</li><li>Structured knowledge transfer sessions to client national staff</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Our Client seeks two dedicated Full-Stack Software Engineers to work full-time on-site at its headquarters in Muscat. The engineers will operate under the direct supervision of the client's IT management and will be responsible for the analysis, development, maintenance, testing, and continuous improvement of judicial, administrative, and e-government systems.</p><p></p></section>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<p>MEP ENGINEER Qualification -BE Electrical Experience - T otal 10 years with minimum 5 year GCC experience as an MEP Engineer GCC driving license -Preferred Leave &amp; Other entitlements -As per Omani Labour Law Age - Below 45 years Salary &amp; Benefits -Salary will be discussed and finalized based on Qualification, experience, skills and Interview assessment by client. In addition of salary company will provide free accommodation , Transportation, Medical GENERAL INFORMATION REQUIRED Please send all documents in following sequence of attachment. Kindly accord priority. Document Required to be sent with CV:- Updated CV Academic Certificate of Graduation and above Achievements/Awards during career growth/Licence (if any)/Permit copy/Any other approvals copy as required for job. Experience certificates Passport copy clear (Please attach your Passport last Visa cancelled page if you were present earlier with any employer of current hiring country) Recent Photograph Mobile number Your current Location If already in Gulf, how soon you can join Current Salary &amp; Salary Expectation In case you need any clarification pls send message on WhatsApp PHONE_NUMBER .</p><p><strong>Desired Candidate Profile</strong></p><p>BE Electrical</p> <p>Total 10 years with minimum 5 year GCC experience as an MEP Engineer</p> <p>GCC driving license -Preferred</p> <p>Age - Below 45 years</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The data engineer is responsible for designing, developing, and maintaining the infrastructure and systems required for data storage, processing, and analysis for AI initiatives. They play a crucial role in building and managing the data pipelines that enable efficient and reliable data integration, transformation, and delivery for all Al projects.</p><p>Key Responsibilities:</p><ul><li>Designs and develops data pipelines that extract data from various sources, transform it into the desired format, and load it into the appropriate data storage systems</li><li>Collaborates with AI developers, data scientists and analysts to optimize models and algorithms for data quality, security, and governance</li><li>Integrates data from different sources, including databases, data warehouses, APIs, and external systems</li><li>Ensures data consistency and integrity during the integration process, performing data validation and cleaning as needed</li><li>Transforms raw data into a usable format by applying data cleansing, aggregation, filtering, and enrichment techniques</li><li>Optimizes data pipelines and data processing workflows for performance, scalability, and efficiency</li><li>Monitors and tunes data systems, identifies and resolves performance bottlenecks, and implements caching and indexing strategies to enhance query performance</li><li>Implements data quality checks and validations within data pipelines to ensure the accuracy, consistency, and completeness of data</li><li>Supports the governance of data and algorithms used for analysis, analytical applications, and automated decision making</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>A bachelor's degree in computer science, data science, software engineering, information systems, or related quantitative field; master's degree preferred</li><li>At least six years of work experience in data management disciplines, including data integration, modeling, optimization and data quality, or other areas directly relevant to data engineering responsibilities and tasks</li><li>Proven project experience developing and maintaining data pipelines for AI projects</li></ul><p>Technical Skills:</p><ul><li>Expert knowledge in Apache technologies such as Kafka, Airflow, and Spark to build scalable and efficient data pipelines</li><li>Ability to design, build, and deploy data solutions that capture, explore, transform, and utilize data to support AI, ML, and Bl</li><li>Strong ability in programming languages such as Java, Python, and C/C++</li><li>Ability in data science languages/tools such as SQL, R, SAS, or Excel</li><li>Proficiency in the design and implementation of modern data architectures and concepts such as cloud services (AWS, Azure, GCP) and modern data warehouse tools (Snowflake, Databricks)</li><li>Experience with database technologies such as SQL, NoSQL, Oracle, Hadoop, or Teradata</li><li>Ability to collaborate within and across teams of different technical knowledge to support delivery and educate end users on data products</li><li>Expert problem-solving skills, including debugging skills, allowing the determination of sources of issues in unfamiliar code or systems, and the ability to recognize and solve repetitive problems</li></ul><p>Key Competencies:</p><ul><li>Excellent business acumen and interpersonal skills; able to work across business lines at a senior level to influence and effect change to achieve common goals.</li><li>Ability to describe business use cases/outcomes, data sources and management concepts, and analytical approaches/options</li><li>Ability to translate among the languages used by executive, business, IT, and quant stakeholders.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Design &amp; Commissioning Engineer Security &amp; Telecom Summary Engineering Graduate with minimum 5-7 years of relevant experience in commissioning of Security system products like Milestone, Genetec, Lenel, CEM System, Softwarehouse, Honelywell, Bosch, Gallaget, Senstar and Southwest Microwave, responsible entire commissioning and technical compliance. Key Job responsibilities and duties Reporting to Technical Lead on all technical related points Analyze system hardware and software requirements for all assigned Security &amp; Telecom System Project BOQ and design properly as per Project requirement Review and ensure Technical Correctness of MAS and Procurement. Designs and/or engineers Security &amp; Telecom systems including but not limited to Access Control system, physical security, intrusion, Video Management System, Fiber optic solution, Structured Cabling solutions, Networking, Telephony, Storage etc. Defines all Technical architectures components including, hardware, software, OS, performance and monitoring of projects assigned, in alignment with all compliance and best practice guidelines. Completes all system design(s) and engineering to core engineering standards. Acts as technical design owner and subject matter expert for assigned projects. Guide and Check system design layouts and installation specifications, including design documents and drawings prepared by Draughtsman/Team. Recommends the use of existing and new technologies to ensure core objectives are met for all security and Telecom projects. Conduct analyses and provide direction and support for Sales/Procurement/Service/Project Team. Maintains expertise in the principles and techniques required for hardware and software system integration. Responsible for all system upgradation and ensure the systems are having latest update. Maintains knowledge of current and emerging technologies and industry best practices related to all security &amp; Telecom systems. Proposes and implements best practices and tools supporting these technologies and practices. Develops system integration skills. Attends industry seminars and /or training sessions in order to stay current with all new security technologies and integration principles. Responsible for successful completion of Factory Acceptance Test, Commissioning, Site Acceptance Test and Client approvals for assigned projects. Develop and articulates a coherent technology architecture and system wide integration for all the Technical Security Systems as project requirement. Inspect, review and approve the erection, cabling and termination works at site as required. Coordinate with system vendors and customer as necessary to implement, integrate, update and test the system. Responsible to maintain the technical documentation as per the standards. Provide the commissioning report, checklist, cause and effect matrix etc., Responsible in managing Teams in delivering client SLA without NCR and in meeting client expectations. Responsible for all technicalities and Level2 &amp; Level3 support to teams in maintaining the Low current systems like CCTV Surveillance Systems, Electronic Access Control Systems, Gates &amp; HVM, PIDS, Electrified Fence, BMS, LCS, AV systems, ICT and Telecom Systems etc. Responsible for all system upgradation and ensure the systems are having latest update. Perform &amp; work on all upgradations [to keep up the systems to latest versions] as per OEM guidelines, migrations, and expansion works in all aspects. Also, to ensure all integration works and compatibility. Responsible for SSA/CarePlus/SUP, and maintaining all clients. Highlight the renewal date of SSA/Careplus/SUP timely to get it renewed. Responsible for handing client technical queries. Conduct Training for Customer and In-house Team. Technical Presentation and lead POC/Demo to customer as required. Responsible to maintain the technical documentation as per the standards. Ensure the client satisfaction throughout the project phase in terms of technical. KPI: K.P.I sTarget % A) System commissioning, SAT and client approvals as per project schedule in line with contractual requirements and product specifications and capabilities. Commissioning the systems, up to the product specs and client expectations in line with the product capabilities B) Pro-active Pre-commissioning and timely and trouble-free commissioning works 35%To maintain all client systems up to date version, and successfully manage upgradation works, Expansion, migration works, to ensure efficient integrations and its compatibility.20%Client SLA and satisfaction levels. In meeting best performance as per ERP analysis.10%Technical documentation works, Service Analysis, better communication internal and external, regular DAR etc10%Expert knowledge on Milestone Xprotect, CEM Systems AC2000, Lenel OnGuard, Pelco VideoXpert, Paxton, Gallagher etc., Technical and Expert Support Levels for all products, and in maintaining product certifications.10%Client Relation and Handlings5%Attitude, Punctuality, Interpersonal skills5%Ensure QHSE and ISO compliance and no NCR in ISO implementation related to Project &amp; service Operations5%</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualification - Professional Engineering Graduate in Electrical, Electronics, Instrumentation, Communication, IT Experience - Engineering Graduate with minimum 5-7 years of relevant experience in managing major turnkey EPC security projects. Preferred Experience of 2-3 years in Middle East region &amp; having valid Oman driving license. 2-3 year Oil &amp; Gas Industrial security projects experience, atleast in 1 major Oil &amp; Gas (Or) Petrochemical EPC Security projects as commissioning Engineer position. The ELV products include Industrial &amp; Commercial CCTV, Integrated high end Access Control, Fire Alarm, Fire Fighting, Intruder Alarm, PAVA systems, Physical Control Equipment, PIDS, BMS, Telecom, A/V systems, ISMS, SMATV, VDP, Gate Automation &amp; residential systems, etc. In addition, the incumbent MUST have related in-depth knowledge on IT &amp; Telecom systems inclusive of database management, Fiber systems, Server &amp; Storage systems, Active &amp; passive components, operating systems, IP domain, redundancy operations in connection with ELV systems specified above.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Instrumentation Asset Data &amp; SAP PM Engineer is responsible for ensuring the accuracy, completeness, and integrity of instrumentation asset data, conducting equipment criticality assessments, and maintaining asset master data within SAP Plant Maintenance (PM). The role supports maintenance reliability, asset performance, and operational excellence by standardizing equipment information and ensuring compliance with engineering and maintenance standards.</p><br><ul><li><p>Review instrumentation records to identify missing, inaccurate, or incomplete equipment data.</p></li><li><p>Verify equipment information using P&amp;IDs, loop diagrams, instrument index, datasheets, and asset registers.</p></li><li><p>Coordinate with Engineering, Maintenance, and Operations teams to collect and validate equipment information.</p></li><li><p>Prepare and standardize equipment datasheets for pressure, temperature, flow, level, analyzers, control valves, and other instrumentation assets.</p></li><li><p>Update technical specifications, operating ranges, calibration details, and equipment parameters while ensuring document accuracy and revision control.</p></li><li><p>Perform equipment criticality assessments based on safety, environmental, production, and reliability impacts.</p></li><li><p>Classify instrumentation assets according to operational risk and support the development of preventive and predictive maintenance strategies.</p></li><li><p>Create, update, and maintain SAP PM master data, including Equipment Masters, Functional Locations, Classification, and Maintenance Plans.</p></li><li><p>Ensure proper asset hierarchy, coding standards, and data quality within SAP.</p></li><li><p>Support asset management initiatives by maintaining accurate equipment records and improving master data quality.</p></li><li><p>Ensure compliance with company engineering standards, maintenance procedures, and HSE requirements.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's Degree in Instrumentation Engineering or a related Engineering discipline.</p></li><li><p>Minimum <strong>5 years</strong> of experience in instrumentation maintenance, reliability, or asset management within industrial environments.</p></li><li><p>Hands-on experience with <strong>SAP Plant Maintenance (SAP PM)</strong>, including Equipment Master Data and Functional Locations.</p></li><li><p>Strong knowledge of industrial instrumentation, calibration, P&amp;IDs, loop diagrams, and engineering documentation.</p></li><li><p>Experience in equipment criticality assessment and maintenance planning is preferred.</p></li><li><p>Proficient in Microsoft Office applications, particularly Excel.</p></li></ul><p></p></section>

<p>Job title Sr. Engineer, Technical Safety Grade Stream Operated Assets Function Projects Delivery Engineering Location Oman Muscat / Project Sites Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Manager, Technical Safety Direct Reports - Job purpose Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main Tasks and Responsibilities Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications. Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities. Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation. Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent). Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP. Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects. Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards. Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase. Support the preparation and review of technical documentation for regulatory submissions and engineering authority approvals. Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle. Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes. Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments. Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly. Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture. Perform other related duties as assigned. Key interactions Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function. External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities. Notable Working Conditions. Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</li><li>Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (T V or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</li><li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li><li>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</li><li>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</li><li>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</li><li>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</li><li>Exposure to Fire &amp; Gas system design and philosophy development.</li><li>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</li><li>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</li><li>Strong analytical and problem-solving skills.</li><li>Good communication skills, verbal and written.</li><li>Attention to detail and high level of technical accuracy.</li><li>Ability to work effectively in multidisciplinary project teams.</li><li>Self-motivated with a proactive approach to identifying and resolving technical safety issues.</li><li>Ability to manage competing priorities in a project environment.</li><li>Cultural sensitivity in a multinational environment.</li><li>Computer literacy including MS Office and engineering software.</li><li>Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie).</li><li>Quantitative and qualitative risk assessment techniques.</li><li>Consequence modelling tools (PHAST, Safeti, FRED, or equivalent).</li><li>Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511).</li><li>Fire &amp; Gas detection system design and philosophy.</li><li>Safety Case development and Major Accident Hazard (MAH) management.</li><li>Process safety engineering principles.</li><li>Applicable international standards (API, IEC, NFPA, IP codes).</li><li>Technical documentation and report writing.</li></ul>

<p>Act as technical authority for WTG erection activities. Supervise unloading, storage,</p><p>preservation, assembly and installation of turbine components. Coordinate crane</p><p>operations and heavy lifts for tower sections, nacelles, hubs and blades. Ensure</p><p>compliance with OEM procedures, quality requirements and HSE standards. Manage</p><p>subcontractors and interfaces with civil, electrical and commissioning teams. Support</p><p>mechanical completion, punch-list clearance and handover.</p><ol><li><p>Minimum Experience Requirements</p></li></ol><p>Minimum 8-10 years in industrial construction. Minimum 8 years dedicated to wind</p><p>turbine erection projects. Proven experience on wind farms above 300 MW.</p><p>Demonstrated involvement from construction through commissioning and COD.</p><p>Experience with international EPC contractors and OEM turbine suppliers.</p><ol><li><p>Preferred OEM Experience</p></li></ol><p>Candidates with hands-on experience in Vestas, Siemens Gamesa, GE Vernova,</p><p>Nordex, Enercon, Goldwind or Sany technologies shall be prioritized.</p><ol><li><p>Technical Competencies</p></li></ol><p>WTG erection methodology; tower installation; nacelle installation; blade mounting; bolt</p><p>tensioning; hydraulic torque equipment; alignment and leveling; lifting studies; heavy</p><p>crane operations; turbine preservation; mechanical inspections; quality dossiers; turbine</p><p>commissioning support; punch-list management; defect identification and rectification;</p><p>work packaging and construction sequencing.</p><ol><li><p>Construction and Project Management</p></li></ol><p>Management of subcontractors, daily progress monitoring, look-ahead planning,</p><p>resource allocation, productivity tracking, interface management, schedule recovery</p><p>actions, risk management and reporting to project management teams.</p><ol><li><p>HSE Requirements</p></li></ol><p>Strong leadership in lifting operations, work at height, rescue plans, permit to work</p><p>systems, lock-out tag-out procedures, risk assessments, toolbox talks and zero-harm</p><p>safety culture. Candidate must demonstrate a proactive safety leadership record.</p><ol><li><p>Qualifications</p></li></ol><p>Bachelor Degree in Mechanical Engineering or related discipline. English proficiency</p><p>B2/C1. Ability to work in remote locations and rotational assignments. Wind industry</p><p>certifications and GWO training are highly desirable.</p><ol><li><p>Geographic Experience</p></li></ol><p>Experience in international utility-scale wind projects is preferred. Middle East, Europe,</p><p>Latin America, Asia-Pacific and Africa wind farm experience will be considered</p><p>advantageous.</p><p><strong>Desired Candidate Profile</strong></p><p>This document defines the minimum and preferred recruitment requirements for hiring a Senior Wind Turbine Erection Engineer responsible for planning, supervision, erection, installation, quality control, mechanical completion and commissioning support of utility scale wind turbine generators (WTG). The role is intended for , Owners Engineers and Owner Representatives involved in onshore and offshore wind projects.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for an <strong>Omani Telecom Engineer&nbsp;</strong>to join its Projects team focusing on delivering across FEED and Detail design scopes of work. In this role, you will be responsible&nbsp;to create Engineering deliverables and execute detail design under the supervision of a senior engineer for a specific project and ensure timely completion to the required quality standards. Assist senior engineer in developing and updating Office Qualty standards and add value to the work optimization process.</p><br><p>Position is based in Oman for a long-term assignment.</p><br><br> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Omani Telecom Engineer will be responsible for :</p><br><p>• Prepare Engineering deliverables.<br> • Conduct relevant Workshops and Reviews<br> • Contribute to Basis for Design Concept Selection, Project Specifications and detail design execution.<br> • Perform Engineering studies, review and maintain Quality and FEED Office standards affecting Telecoms in FEED Office.</p><br><p><strong>Designing the future. Transforming the world</strong></p><br><p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.<br> &nbsp;</p><br><p><strong>What we can offer</strong></p><br><ul> <li>Meaningful and interesting projects delivered to leaders of industry across oil and gas&nbsp; and emerging energy sectors&nbsp;</li> <li>Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice</li> <li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li> <li>Medical Insurance:&nbsp;Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.</li> <li>Workmen’s Compensation: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.</li> <li>Employee Assistance Programme:&nbsp;Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li></ul><p><strong>Typical responsibilities</strong></p><br><ul> <li>Responsible for initiating the First- Cut design of Telecom system under the accountability of Sr. Engineer</li> <li>Responsible for inititating meeting and technical solution discussions between several stake holders of the project.</li> <li>Responsible for obtaining As-Built information and aquiring solutions in the absence of As-built information</li> <li>Responsible for managing Technical Clarifications- on scope and needs.</li> <li>Responsible for coordination with the asset teams for the information</li> <li>Manage all technical changes internally and obtaining approval from Discipline Leads.</li> <li>Responsible for Scope change confirmation (TIN)</li> <li>Accountable for the Decision Making on changes</li> <li>Mange all Assurance Reviews and action close outs</li> <li>Accountable for Raising + Uploading +Liaising + Technical Variances</li> <li>Responsible for approving TPS Final reports</li> <li>Responsible for reviewing and approval of design and vendor documents in SPO.</li> <li>Responsible for obtaining DEM compliances.&nbsp;</li> <li>Maintaining a good relationship with the client is critical to the success of the (design) project and often requires visit to the site and/or client office.</li> <li>Be a team player where recognition of team performance as a whole is a greater priority than projecting individual contribution.</li> <li>Be able to work in a team environment and handle multiple project responsibilities.</li> <li>Application and maintenance of engineering processes, systems and tools (software).</li> <li>Follow/ensure Quality Management System Requirements are met in line with ISO 9001-2015 and API Q2 2nd edition requirement.</li> <li>Shall be abreast with new Telecom technology and innovations.</li></ul><br>Qualifications:<br><p>What makes you remarkable?&nbsp;</p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;</p><br><p>Experience:</p><br><ul> <li>Degree in Relevant Engineering or equivalent.</li> <li>Minimum 8 years experience in upstream oil &amp; gas Engineering.</li> <li>Good communicator and strong team player.</li> <li>Minimum 3 years in FEED/ENGINEERING and Minimum 8 years in oil &amp; gas Experience.</li></ul> </div>

<p><h4>Energy Jobline overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Role overview</h4> <p>We are seeking an experienced PCC Instrumentation Lead Engineer to lead and execute instrumentation related precommissioning and commissioning activities on a large-scale LNG facility. The role carries full responsibility for instrumentation systems readiness from mechanical completion through commissioning, startup support, and handover to operations.</p> <p>This is a site based leadership role, suited to senior instrumentation commissioning professionals with strong EPC project experience.</p> <h4>Key responsibilities</h4> <ul> <li>Lead all instrumentation PCC activities in line with the commissioning philosophy and schedule</li> <li>Provide technical and execution leadership to instrumentation system engineers and field teams</li> <li>Ensure instrumentation systems are fully prepared for: <ul> <li>Precommissioning</li> <li>Commissioning</li> <li>Startup and initial operation</li> </ul> </li> <li>Coordinate and supervise key activities including: <ul> <li>Instrument installation verification and inspection</li> <li>Loop checking and functional testing</li> <li>Cause & effect testing</li> <li>Instrument calibration and validation</li> <li>Control valve testing and stroking</li> <li>Analyzer commissioning</li> </ul> </li> <li>Verify mechanical completion (MC) and manage punch list clearance for instrumentation scope</li> <li>Coordinate closely with electrical, process, operations, construction, HSE, and QA/QC teams</li> <li>Review and approve instrumentation commissioning procedures, test packs, and dossiers</li> <li>Support DCS, ESD, F&G, and PLC system testing in coordination with vendors and automation teams</li> <li>Manage SIMOPS, PTW compliance, and safe execution of live system testing</li> <li>Report on progress, constraints, and risks to the commissioning manager</li> </ul> <h4>Mandatory requirements (strict)</h4> <h5>Education</h5> <p>Bachelor’s degree in instrumentation, control, electrical, or related engineering discipline</p> <h5>Experience</h5> <ul> <li>Minimum 10 years experience in oil & gas or LNG projects</li> <li>Proven role as instrumentation lead during precommissioning and commissioning phases</li> <li>Strong hands-on experience with: <ul> <li>Instrument loop checks</li> <li>Control systems and safety systems commissioning</li> <li>Large EPC project environments</li> <li>Extensive site based LNG or gas processing facility experience</li> </ul> </li> <li>Candidates without direct instrumentation commissioning leadership experience will not be considered</li> </ul> <h5>Technical expertise</h5> <ul> <li>Strong knowledge of: <ul> <li>Instrumentation commissioning workflows and system handover</li> <li>DCS, ESD, F&G, PLC, and analyzer systems</li> <li>Commissioning documentation, test packs, and system dossiers</li> </ul> </li> <li>Ability to interpret: <ul> <li>P&IDs and cause & effect charts</li> <li>Instrument loop diagrams and hookups</li> <li>Control system architecture drawings</li> </ul> </li> </ul> <h5>Leadership & professional skills</h5> <ul> <li>Proven ability to lead multidisciplinary instrumentation teams</li> <li>Strong coordination and interface management skills</li> <li>Practical, hands-on problem solver</li> <li>Clear verbal and written communication in English</li> <li>Comfortable working in high pressure, multicultural site environments</li> </ul> <h4>Ideal background</h4> <ul> <li>EPC contractor commissioning background</li> <li>LNG precommissioning, commissioning, and startup exposure</li> <li>Middle East project experience</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wood is recruiting for a Senior Control &amp; Automation Engineer to join its Projects team focusing on delivering across FEED and Detail design scopes of work. <br> Position is based in Muscat, Oman</p> <div> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com <br></div> <div> <br> </div> <div> <b>Diversity Statement </b> </div> <div> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br></div> <p> <strong>What makes you remarkable? </strong> </p> <p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. </p> <p> <strong>Experience:</strong> </p> <ul> <li>Minimum 6 years in FEED/ENGINEERING and Minimum 10 years in oil &amp; gas Experience.</li> <li>C&amp;A Engineering degree or equivalent</li> <li>Good communicator with experience in leading small teams.</li> <li>TA2 certification</li> </ul> <p>The Senior Control &amp; Automation Engineer will be responsible to manage all the C&amp;A Engineering activities and deliverables for a specific project and ensure timely completion to the required quality standards.</p> <p> <strong>Designing the future. Transforming the world</strong> </p> <p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.<br> <br> <strong>What we can offer</strong> </p> <ul> <li>Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors </li> <li>Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice</li> <li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li> <li>Medical Insurance: Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.</li> <li>Workmen s Compensation: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.</li> <li>Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li> </ul> <p> <strong>Typical responsibilities</strong> </p> <ul> <li>Create demonstrable value for customers by understanding their drivers and critical success factors.</li> <li>Provide effective interfaces and relationships within/between disciplines, and peers in other project teams and Customer Operating Units (OU s).</li> <li>Execute, with assigned resources, technical work for FEED and Detailed Designs (designs, specifications, drawings, etc.) within designated Cost Time &amp; Resource (CTR) scopes.</li> <li>Ensure own discipline engineering and design work successfully delivered and appropriate reviews conducted. </li> <li>Implement, practise and Monitor Quality Management System (QMS) in FEED office projects in line with ISO 9001-2015 and API Q2 2nd edition requirement.</li> <li>Carry out appropriate discipline and inter discipline checks and reviews of engineering and design work.</li> <li>Contribute to the development of execution contracting strategies that compliment designs, construction methods and operating methods.</li> <li>Remain engaged in design issues and decisions throughout construction, commissioning and start-up.</li> <li>Capture and apply internal and external learnings, including HSE improvements.</li> <li>Deliver continuously improving performance, benchmarked as top tier in the industry.</li> <li>Ensures the quality of technical work and the technical integrity, constructability, functionality, safe operation and reliability of designs.</li> <li>Contributes to excellent HSE performance throughout the engineering phase of the project life cycle.</li> <li>Ensure subordinate Discipline Engineers Time write correctly to the Project(s) each week.</li> </ul></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Senior Piping Engineer to join its Projects team focusing on delivering across FEED and Detail design scopes of work. This role is to supervise a team of piping engineers and designers to translate the limited information from the Concept Selection Report and/or Basis for Design to Basis for Design and/or Front End Design &amp; project specifications as well as detailed design.</p><br><p>Supervise a team of piping engineers to carry out the Piping Engineering FEED and DD activities (Define and Execute stage) for an assigned area of a specific project in order to generate the relevant Piping Engineering FEED and DD deliverables on time according to DCAF requirements.<br> &nbsp;</p><br><br> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p><strong>Designing the future. Transforming the world</strong></p><br><p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, for those with experience in Onshore Oil and Gas.</p><br><p><strong>What we can offer</strong></p><br><ul> <li>Meaningful and interesting projects delivered to leaders of industry across oil and gas&nbsp; and emerging energy sectors&nbsp;</li> <li>Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice</li> <li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li> <li>Medical Insurance:&nbsp;Ensures inpatient and outpatient care is available should you require treatment. Cover limits apply, please refer to the terms of benefit and network list for further details.</li> <li>Workmen’s Compensation: Provides payment of 3 x Annual Wage (up to a maximum of 5000 OMR) upon death or permanent disability.</li> <li>Employee Assistance Programme:&nbsp;Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li></ul><p><strong>Responsibilities</strong></p><br><ul> <li>Prepare Piping Engineering Cost, Time and Resource (CTR) Catalogue for projects</li> <li>Supervise a team of piping engineers and Designer assigned to a project area (supervised by Project piping Lead)</li> <li>Contribute to Basis for Design, Basis of Design, and Project Specifications/Philosophies</li> <li>Develop Equipment Layout/Plot Plan based on PFS/UFS, Technical safety requirements</li> <li>Develop Piping Layout based on PEFS/UEFS</li> <li>Carry out Stress Analysis for critical lines</li> <li>Select / Develop piping classes based on MSR</li> <li>Develop / Approve specification for piping materials and speciality items</li> <li>Follow Quality Management System (QMS) requirements in line with ISO 9001-2015 and API Q2 2nd edition requirements.</li> <li>Initiate, check, and/or approve Piping Engineering Deliverables</li> <li>Provide input / Review other discipline deliverable as appropriate.</li> <li>Conduct Layout Review / Model Reviews and ensure timely close-out of all actions.</li> <li>Support procurement and construction activities.</li> <li>Participate in HAZID, Design Review, HAZOP, IPF and various HSE related workshop<br> &nbsp;</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;</p><br><p><strong>Experience</strong></p><br><ul> <li>TA 2</li> <li>Minimum 6 years in FEED and DD /ENGINEERING and Minimum 10 years in oil &amp; gas Experience.</li> <li>Good communicator and good inter-personal/leadership skills.</li> <li>Experience in managing small teams and third part contractor/licensor.</li> <li>Fluent in English; Written and Spoken.<br> &nbsp;</li></ul> </div>

<p>Provide technical safety engineering support across OQEP's project delivery activities, ensuring that technical safety requirements are identified, assessed, and incorporated into project designs, engineering documents, and operational philosophies in compliance with applicable standards, regulations, and OQEP's HSSE framework. The position will act in accordance with the OQEP s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, QHSE &amp; Energy Management System requirements standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p><strong>Main Tasks and Responsibilities</strong></p><ul><li>Support the execution of technical safety engineering activities across OQEP's project delivery portfolio, ensuring compliance with applicable international standards, codes, and OQEP's engineering specifications.</li><li>Participate in and contribute to hazard identification and risk assessment studies including HAZID, HAZOP, What-If analyses, and Bow-Tie analyses for projects and operational facilities.</li><li>Support the development and review of technical safety deliverables including Safety Concept documents, Fire &amp; Gas Philosophy, Escape, Evacuation &amp; Rescue (EER) Philosophy, and Safety Instrumented System (SIS) documentation.</li><li>Perform quantitative and qualitative risk assessments including consequence modelling, dispersion analysis, fire and explosion modelling using industry-standard tools (e.g., PHAST, Safeti, or equivalent).</li><li>Review engineering design documents, P&amp;IDs, equipment datasheets, and layout drawings from a technical safety perspective, identifying hazards and recommending design modifications to reduce risk to ALARP.</li><li>Support the development and maintenance of Safety Cases and Major Accident Hazard (MAH) registers for OQEP's operated facilities and projects.</li><li>Contribute to the specification, design review, and testing of Safety Instrumented Systems (SIS) and Fire &amp; Gas detection systems in accordance with IEC 61508 and IEC 61511 standards.</li><li>Participate in pre-FEED, FEED, and detailed design technical safety reviews, ensuring technical safety requirements are addressed at each project phase.</li><li>Support the preparation and review of technical safety documentation for regulatory submissions and engineering authority approvals.</li><li>Liaise with project engineers, discipline leads, contractors, and vendors on technical safety matters throughout the project lifecycle.</li><li>Support post-incident investigations and safety performance reviews, contributing technical safety expertise to root cause analysis and lessons-learned processes.</li><li>Maintain accurate technical safety documentation including risk registers, study reports, and engineering assessments.</li><li>Stay current with developments in technical safety standards, regulations, and industry best practices, and recommend updates to OQEP's engineering guidelines accordingly.</li><li>Actively participate in, contribute to, and promote OQEP's occupational health, safety, security, and environment culture.</li><li>Perform other related duties as assigned.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Projects Delivery function, HSSE function, Operations function, Engineering disciplines within Operated Assets, Maintenance function.</li><li>External: Engineering contractors and consultants, specialist technical safety consultants, equipment vendors, third-party inspection and certification bodies, regulatory authorities.</li></ul><p><strong>Notable Working Conditions.</strong></p><ul><li>Office and field environment, intensive computer screen use, occasional travel to project sites and operated asset locations, exposure to operational hazards in accordance with OQEP HSE standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Education requirements</strong></p><ul><li>Required: Bachelor's degree in Chemical Engineering, Process Engineering, Mechanical Engineering, or related engineering discipline.</li><li>Preferred: Postgraduate qualification or professional certifications such as Chartered Engineer (CEng), Functional Safety Engineer (T V or equivalent), or IEC 61511 certification; training in HAZOP facilitation or quantitative risk assessment is an advantage.</li><li>Language: Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li></ul><p><strong>Background and experience</strong></p><ul><li>6+ years of relevant experience in technical safety engineering within the upstream Oil &amp; Gas, petrochemical, or refining industry.</li><li>Experience supporting or conducting hazard identification and risk assessment studies (HAZID, HAZOP, QRA).</li><li>Familiarity with consequence modelling and risk assessment tools (e.g., PHAST, Safeti, FRED, or equivalent).</li><li>Knowledge of Safety Instrumented Systems (SIS) and functional safety standards (IEC 61508, IEC 61511).</li><li>Exposure to Fire &amp; Gas system design and philosophy development.</li><li>Familiarity with applicable international standards including API, IEC, NFPA, and IP codes relevant to technical safety.</li><li>Experience working on oil and gas projects across pre-FEED, FEED, or detailed design phases is preferred.</li></ul><p><strong>Competencies and skills</strong></p><ul><li>Soft: Strong analytical and problem-solving skills. Good communication skills, verbal and written. Attention to detail and high level of technical accuracy. Ability to work effectively in multidisciplinary project teams. Self-motivated with a proactive approach to identifying and resolving technical safety issues. Ability to manage competing priorities in a project environment. Cultural sensitivity in a multinational environment.</li><li>Technical: Computer literacy including MS Office and engineering software. Hazard identification and risk assessment methodologies (HAZID, HAZOP, What-If, Bow-Tie). Quantitative and qualitative risk assessment techniques. Consequence modelling tools (PHAST, Safeti, FRED, or equivalent). Safety Instrumented Systems (SIS) and functional safety (IEC 61508, IEC 61511). Fire &amp; Gas detection system design and philosophy. Safety Case development and Major Accident Hazard (MAH) management. Process safety engineering principles. Applicable international standards (API, IEC, NFPA, IP codes). Technical documentation and report writing.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a seasoned Enterprise &amp; Solution Architect with strong cross-domain expertise and deep technology capabilities to drive large-scale digital transformation initiatives. The role requires a strategic thinker with hands-on architecture experience across industries such as Telecom, Energy, Public Sector, and BFSI, combined with strong proficiency in modern technology stacks including cloud, web, and advanced Data &amp; AI.</p><p>Key Responsibilities - Define and drive enterprise architecture strategy aligned with business goals across multiple industry domains (Telco, Energy, Public Sector, BFSI). - Lead end-to-end solution architecture for large, complex transformation programs, ensuring scalability, security, and performance. - Design and govern data-driven architectures, including data platforms, analytics ecosystems, and AI/ML solutions. - Architect and implement solutions leveraging Cloud (OCI/AWS/Azure/GCP), Microservices, APIs, and Modern Web Technologies. - Drive adoption of AI capabilities, including Machine Learning, Generative AI, and emerging Agentic AI frameworks for enterprise use cases. - Establish architecture governance, standards, and best practices across programs and portfolios. - Collaborate with business stakeholders to translate requirements into scalable and future-ready architecture blueprints. - Provide technical leadership across delivery teams, ensuring alignment with architecture vision and quality benchmarks. - Evaluate and recommend technology platforms, tools, and vendors aligned with enterprise strategy. - Lead solutioning for RFPs, proposals, and client engagements, including effort estimation and technical strategy.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><strong>Must have Skills :</strong> Architecture (Strong), Cloud architecture (Strong), Technology Architect - Data Architecture (Strong), Technology Architect - Generative AI, Experience: 12+ Years</li><li><strong>Key Skills &amp; Competencies</strong></li><li><strong>Domain Expertise</strong> - Strong understanding of at least two or more domains: o Telecom (BSS/OSS, Digital Channels) o Energy &amp; Utilities o Public Sector (eGov, Smart City) o BFSI (Banking, Payments, Insurance)</li><li><strong>Technology Expertise</strong> - Cloud Platforms: AWS, Azure, or GCP (multi-cloud exposure preferred) - Architecture Patterns: Microservices, Event-driven, API-first, Domain-driven design - Web Technologies: Modern front-end and backend frameworks - Integration: APIs, Middleware, ESB, iPaaS</li><li><strong>Data &amp; AI (Core Focus)</strong> - Strong expertise in Data Architecture (Data Lakes, Data Warehouses, Lakehouse) - Hands-on experience with Machine Learning models and lifecycle management (MLOps) - Experience in Generative AI (LLMs, prompt engineering, RAG architectures) - Exposure to Agentic AI systems (autonomous agents, orchestration frameworks) - Knowledge of data governance, security, and privacy frameworks</li><li><strong>Qualifications</strong> - Bachelor's or Master's degree in Computer Science, Engineering, or related field - Architecture certifications (TOGAF, Cloud Architect certifications) preferred</li><li><strong>Leadership &amp; Behavioral Skills</strong> - Strong stakeholder management and executive communication skills - Ability to operate at both strategic and hands-on levels - Proven experience in leading distributed and cross-functional teams - Strong problem-solving and decision-making capabilities</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wood is currently hiring for a Senior Process Safety Engineer for a secondment role in Muscat Oman. Duration of this assignment is 1 year Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com</p><p>Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</p><p>What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p>Experience: Minimum 15 years of experience in similar projects Process/Chemical Engineering Degree with relevant certification Experience in refinery and petrochemical projects preferred</p><p>Execute the activities and processes associated with Process Safety Engineering in the NGLE Project, under Process Engineering scope. Apply and expand hands-on experience in Engineering, Procurement, Construction, and commissioning and Operation oil &amp; gas industry. Responsible for supporting and executing general engineering activities directly linked to Process engineering. Designing the future. Transforming the world Reflecting the market focus for the brownfield and green field opportunities, multi-skilled personnel are sought, in particular those with experience in refinery and petrochemical industry.</p><p>What we can offer</p><ul><li>Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.</li><li>Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li></ul><p>Typical responsibilities</p><ul><li>Monitor the execution of the quality assurance program for conformance to project requirements.</li><li>To contribute to the development of optimal business strategies during FEED and ensure the satisfactory execution of NGLE project by achieving the project s technical quality requirements within agreed budgets and schedules.</li><li>Lead the Process Safety Engineering technical detailed design scope to bring out the best strategies and approaches to deliver the technical requirements.</li><li>Prepare the necessary documentation, establishing major methods and data as necessary and ensure selection of the optimum Process Safety design from both technical and economic standpoints.</li><li>Ensure that design methods, standards and data used conform to Asset Owners requirements and/or those issued by Centre of Excellence.</li><li>Ensure the preparation of Process Safety and Operations Philosophy document incorporating user requirements.</li><li>In consultation with Project Delivery Skill-pool, assign appropriate Process Safety engineering resources and monitor performance to ensure all Process Safety Engineering deliverables are accomplished.</li><li>Be responsible for the coordination, execution and progress of Process Safety Engineering design under the supervision of the Lead Engineering.</li><li>Be responsible for technical accuracy, quality and economy of Process Safety engineering applications design.</li><li>Liaise with Vendor s representatives and other functions on all matters relating to Process design and execution.</li><li>Ensure OQ Safety and Quality control procedures are followed during execution of all work and that a high standard of safety is achieved in all design work.</li><li>Participate pre and post contract award in discussions with Asset Owners to assess and assist in the definition of user requirements.</li><li>Review Process Safety Engineering Deliverables and participate in project reviews and workshops.</li><li>Participate in solving Process Safety engineering challenges that are recognised during development of the Front-End Package or detailed engineering</li><li>Identify gaps in existing practices and tools and manage the process of developing new practices or toolkit items that enhance OQ technological offering.</li><li>Other relevant duties as requested from time to time.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Experience: Minimum 15 years of experience in similar projects Process/Chemical Engineering Degree with relevant certification Experience in refinery and petrochemical projects preferred</p><p></p></section>