Automotive Engineer Jobs in Oman

<p>POSITION SUMMARY Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance. Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: Technical, Trade, or Vocational School Degree. Related Work Experience: At least 3 years of related work experience. Supervisory Experience: No supervisory experience.</p><p>License or Certification: EPA Universal Certification Driver's License HVAC Certification</p>

<p>Job title Expert SAP Technical -Security Grade Stream People &amp; Technology Function Corporate IDS Location Oman -Muscat Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Manager SAP Technical Direct reports 0 Job purpose Leads the design, governance, and administration of SAP Technical Security to ensure the confidentiality, integrity, and availability of SAP systems and data. The role provides expert support for SAP Access Control through the SAP GRC suite, advises both business and SAP technical teams on best practice security models, and develops strong access and compliance controls across all SAP landscapes. It safeguards the organization from internal and external threats, ensures alignment with regulatory and corporate requirements, and promotes a culture of security awareness across the enterprise.</p><p>The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Main tasks and responsibilities</p><ul><li>Develop and maintain SAP security policies, standards, and guidelines aligned with best practices, regulatory requirements, and corporate governance.</li><li>Design and implement role-based access control (RBAC), authorization concepts, and segregation of duties (SoD) frameworks to ensure least privilege access.</li><li>Architect and design SAP security solutions that meet OQ GRC requirements.</li><li>Implement and maintain security controls within S/4HANA, BW/BI, SAP SCM, SAP BTP and Business Objects.</li><li>Work directly with business users to establish security controls that support compliance while enabling business operations.</li><li>Provide expert-level operational support for SAP production security incidents, enhancements, role design, authorization errors, user administration, and SAP GRC system management.</li><li>Monitor and self-assign incoming SAP security and user administration tickets, ensuring timely and accurate resolution.</li><li>Manage user provisioning, role assignments, and access requests using SAP Identity Management (IDM), SAP Access Control (GRC), and relevant IAM tools.</li><li>Conduct periodic user access reviews, access certifications, and compliance assessments to ensure adherence to policies and regulations.</li><li>Collaborate with the Cybersecurity/SOC team to review SAP related SIEM alerts, security events, and audit logs, providing SAP expertise during investigations</li><li>Investigate security incidents, perform root cause analysis, and coordinate resolution with IT Security, SAP Basis, and business stakeholders.</li><li>Conduct regular security audits , assessments, and compliance reviews to validate the effectiveness of SAP controls and recommend remediation actions.</li><li>Prepare documentation and evidence for internal and external audits, ensuring compliance with requirements such as GDPR and SOX.</li><li>Perform vulnerability assessments, security scans, and penetration tests on SAP systems to identify and remediate weaknesses.</li><li>Coordinate the deployment of SAP security patches, notes, and corrections to maintain system integrity.</li><li>Deliver SAP security awareness training for users, administrators, and stakeholders to strengthen the organization s security culture.</li><li>Develop security procedures, guidelines, and training materials tailored to different user roles and business processes.</li></ul><p>Key interactions</p><ul><li>Internal: People &amp; Technology &amp; Corporate IDS</li><li>External: 3rd party Contractors, Vendors &amp; Suppliers</li></ul><p>Notable Working Conditions. Office environment, intensive computer screen use, sporadic visits to operation site.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>A minimum of a Bachelor's degree IT or related disciplines.</li><li>Certification in SAP security (e.g., SAP Certified Technology Associate - Security with SAP NetWeaver), is a plus.</li><li>SAP Basis Certified, SAP GRC Certified and relevant cloud/security certifications are a plus.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>A minimum of 8-10 years of experience in SAP security roles, with expertise in SAP security architecture, user management, access controls, and compliance.</li><li>Experience with security standards, frameworks, and regulations such as ISO 27001, NIST Cybersecurity Framework, GDPR, and SOX.</li><li>Experience in leading teams of SAP Security and SAP GRC Resources</li><li>Experience in implementing SAP Basis and Security Modules.</li><li>Experience in project managing SAP Security implementations across S/4HANA, BW/BI, and Fiori landscapes.</li><li>Excellent critical thinking skills, with the ability to analyze complex security issues, assess risks, and propose effective solutions.</li><li>Effective communication, collaboration, and stakeholder management skills, with the ability to interact effectively with technical teams, business users, and audit teams.</li><li>Analytical skills.</li><li>Planning skills.</li><li>Forward thinking.</li><li>Strong presentation skills.</li><li>Business Results Orientation.</li><li>Prioritization skills.</li><li>Computer Literacy including MS Office.</li><li>Advanced SAP software knowledge and a full understanding of security roles related to SAP user profiles is an advantage.</li><li>Strong knowledge of SAP security technologies and tools, including SAP IDM, SAP GRC, SAP SIEM, and SAP Security Notes.</li><li>Understanding of coding languages (SAP ABAB ABAP, SAP Fiori, Java, JavaScript).</li><li>Familiarity with integration middleware, ETL platforms, mobility solutions, and cloud-based services</li><li>Strong understanding of O&amp;G ERP business process.</li><li>Understanding of audit and business controls functions and its related SAP Security.</li><li>Project Management.</li></ul>

<p>Job title Expert SAP Technical -Security Grade Stream People &amp; Technology Function Corporate IDS Location Oman -Muscat Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Manager SAP Technical Direct reports 0 Job purpose Leads the design, governance, and administration of SAP Technical Security to ensure the confidentiality, integrity, and availability of SAP systems and data. The role provides expert support for SAP Access Control through the SAP GRC suite, advises both business and SAP technical teams on best practice security models, and develops strong access and compliance controls across all SAP landscapes. It safeguards the organization from internal and external threats, ensures alignment with regulatory and corporate requirements, and promotes a culture of security awareness across the enterprise. The position will act in accordance with the Group s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives. Main tasks and responsResponsibilities</p><ul><li>Develop and maintain SAP security policies, standards, and guidelines aligned with best practices, regulatory requirements, and corporate governance.</li><li>Design and implement role-based access control (RBAC), authorization concepts, and segregation of duties (SoD) frameworks to ensure least privilege access.</li><li>Architect and design SAP security solutions that meet OQ GRC requirements.</li><li>Implement and maintain security controls within S/4HANA, BW/BI, SAP SCM, SAP BTP and Business Objects.</li><li>Work directly with business users to establish security controls that support compliance while enabling business operations.</li><li>Provide expert-level operational support for SAP production security incidents, enhancements, role design, authorization errors, user administration, and SAP GRC system management.</li><li>Monitor and self-assign incoming SAP security and user administration tickets, ensuring timely and accurate resolution.</li><li>Manage user provisioning, role assignments, and access requests using SAP Identity Management (IDM), SAP Access Control (GRC), and relevant IAM tools.</li><li>Conduct periodic user access reviews, access certifications, and compliance assessments to ensure adherence to policies and regulations.</li><li>Collaborate with the Cybersecurity/SOC team to review SAP related SIEM alerts, security events, and audit logs, providing SAP expertise during investigations</li><li>Investigate security incidents, perform root cause analysis, and coordinate resolution with IT Security, SAP Basis, and business stakeholders.</li><li>Conduct regular security audits , assessments, and compliance reviews to validate the effectiveness of SAP controls and recommend remediation actions.</li><li>Prepare documentation and evidence for internal and external audits, ensuring compliance with requirements such as GDPR and SOX.</li><li>Perform vulnerability assessments, security scans, and penetration tests on SAP systems to identify and remediate weaknesses.</li><li>Coordinate the deployment of SAP security patches, notes, and corrections to maintain system integrity.</li><li>Deliver SAP security awareness training for users, administrators, and stakeholders to strengthen the organization s security culture.</li><li>Develop security procedures, guidelines, and training materials tailored to different user roles and business processes.</li></ul><p>Key interactions</p><ul><li>Internal: People &amp; Technology &amp; Corporate IDS</li><li>External: 3rd party Contractors, Vendors &amp; Suppliers</li></ul><p>Notable Working Conditions. Office environment, intensive computer screen use, sporadic visits to operation site.</p><p><strong>Desired Candidate Profile</strong></p><p>A minimum of a Bachelor s degree IT or related disciplines. <br>Certification in SAP security (e.g., SAP Certified Technology Associate - Security with SAP NetWeaver), is a plus. <br>SAP Basis Certified, SAP GRC Certified and relevant cloud/security certifications are a plus. <br>Language Excellent knowledge of written, read, and spoken English (required)</p><p>Background and experience</p><p>Competencies and skills</p><ul><li>A minimum of 8-10 years of experience in SAP security roles, with expertise in SAP security architecture, user management, access controls, and compliance.</li><li>Experience with security standards, frameworks, and regulations such as ISO 27001, NIST Cybersecurity Framework, GDPR, and SOX.</li><li>Experience in leading teams of SAP Security and SAP GRC Resources</li><li>Experience in implementing SAP Basis and Security Modules.</li><li>Experience in project managing SAP Security implementations across S/4HANA, BW/BI, and Fiori landscapes.</li></ul><p>Soft:</p><ul><li>Excellent critical thinking skills, with the ability to analyze complex security issues, assess risks, and propose effective solutions.</li><li>Effective communication, collaboration, and stakeholder management skills, with the ability to interact effectively with technical teams, business users, and audit teams.</li><li>Analytical skills.</li><li>Planning skills.</li><li>Forward thinking.</li><li>Strong presentation skills.</li><li>Business Results Orientation.</li><li>Prioritization skills.</li></ul><p>Technical:</p><ul><li>Computer Literacy including MS Office.</li><li>Advanced SAP software knowledge and a full understanding of security roles related to SAP user profiles is an advantage.</li><li>Strong knowledge of SAP security technologies and tools, including SAP IDM, SAP GRC, SAP SIEM, and SAP Security Notes.</li><li>Understanding of coding languages (SAP ABAB ABAP, SAP Fiori, Java, JavaScript).</li><li>Familiarity with integration middleware, ETL platforms, mobility solutions, and cloud-based services</li><li>Strong understanding of O&amp;G ERP business process.</li><li>Understanding of audit and business controls functions and its related SAP Security.</li><li>Project Management.</li></ul>

<p>The Head of Design – Infrastructure is responsible for leading and managing the full infrastructure design function across all phases of the project lifecycle, including pre-contract, tendering, post-contract execution, construction support, and handover. The role acts as the single point of accountability for infrastructure design, ensuring that all technical solutions are aligned with the client’s vision, project objectives, delivery program, budget requirements, authority regulations, and construction strategy. This position requires strong leadership across multidisciplinary infrastructure teams, including roads, utilities, drainage, wet services, dry services, civil works, structures, traffic, mobility, and specialist technical disciplines. The Head of Design ensures that all infrastructure design outputs are coordinated, compliant, constructible, cost-effective, and delivered to the required quality standards. </p><p><strong>Desired Candidate Profile</strong></p><p>Strong leadership and design management capability. Excellent technical understanding of infrastructure systems, including roads, utilities, drainage, civil works, earthworks, grading, and external networks. Ability to manage complex technical interfaces across multiple disciplines and stakeholders. Strong knowledge of authority approvals, NOCs, technical compliance, design governance, risk management, and quality assurance. Excellent communication, negotiation, reporting, and stakeholder management skills. Strong commercial and construction awareness, with the ability to balance design quality, cost, schedule, constructability, and long-term asset performance. Ability to lead under pressure, resolve complex technical issues, and make sound decisions in a fast-paced project environment. ________________________________________ Overall Accountability The Head of Design – Infrastructure is accountable for ensuring that all infrastructure design activities are strategically led, technically coordinated, authority-compliant, constructible, cost-effective, and aligned with the overall program objectives. The role protects design integrity while enabling timely delivery, managing technical risk, and supporting successful procurement, construction, and handover outcomes </p>

<p>We are looking for an experienced and skilled Mobile Phone Repair Technician Multi-Brand to join a mobile phone repair and service business in Oman. The ideal candidate should have strong hands-on experience in diagnosing, troubleshooting, servicing, and repairing smartphones across different brands and models. The candidate should be capable of independently handling repair jobs from diagnosis to completion while maintaining good quality and customer service.</p><p>Key Responsibilities</p><ul><li>Diagnose and troubleshoot mobile phone hardware and software problems.</li><li>Repair smartphones from multiple brands and models, including Android and iOS devices.</li><li>Handle common repairs such as display, battery, charging port, speaker, microphone, camera, buttons, and other component replacements.</li><li>Perform motherboard/PCB-level troubleshooting and repair, where applicable.</li><li>Carry out soldering and micro-soldering work with proper care and precision.</li><li>Identify faulty components and perform appropriate component/IC replacement.</li><li>Handle software-related issues such as OS problems, updates, resets, and troubleshooting.</li><li>Safely disassemble and reassemble mobile devices without causing additional damage.</li><li>Test repaired devices thoroughly before handing them over to customers.</li><li>Maintain proper care of tools, equipment, spare parts, and customer devices.</li><li>Keep the repair area clean and organized.</li><li>Provide basic technical guidance to customers regarding device issues and maintenance.</li><li>Follow proper safety procedures while handling electronic components and repair equipment.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Required Skills &amp; Experience</h2><ul><li>2 to 7 years of hands-on experience in mobile phone repair.</li><li>Experience working with multiple mobile brands and models .</li><li>Strong knowledge of smartphone hardware and software.</li><li>Good troubleshooting and fault-diagnosis skills.</li><li>Experience in soldering/micro-soldering and PCB repair is highly preferred.</li><li>Ability to work independently with minimum supervision.</li><li>Good attention to detail and commitment to quality.</li><li>Willingness to relocate and work in Oman .</li></ul><h2>Educational Qualification</h2><ul><li>ITI / Diploma in Electronics, Electrical, Electronics &amp; Communication, or a related technical field is preferred.</li><li>Candidates with strong relevant hands-on mobile repair experience may also be considered irrespective of formal qualification.</li></ul><p>This is an opportunity to join a growing mobile repair business in Oman. Candidates who are technically strong, responsible, and genuinely passionate about mobile phone repair are encouraged to apply.</p>

<p><h4>Overview</h4> <p>An opportunity is available for an experienced LNG subject matter expert to support major brownfield modification and execution activities across onshore LNG facilities in Oman and Qatar. This role focuses on construction planning, execution sequencing, and operational interface management within live plant environments.<br> You will act in a key advisory capacity, supporting EPC execution while ensuring safe, efficient, and well-coordinated delivery in complex operational settings.</p> <h4>Key responsibilities</h4> <ul> <li>Provide subject matter expertise across LNG brownfield execution and modification works</li> <li>Support demolition, revamp, and major facility modification activities</li> <li>Develop construction sequencing and execution logic aligned with isolations and area handovers</li> <li>Link execution sequencing to work packs, job cards, and field execution plans</li> <li>Review and support planning of SIMOPS activities within live operating environments</li> <li>Ensure effective application of PTW systems, isolations, and operational constraints</li> <li>Assess constructability including access, lifting strategies, and logistics planning</li> <li>Provide field-based input into execution planning and readiness reviews</li> <li>Review EPC execution strategies and provide guidance from an owner's perspective</li> <li>Challenge and validate contractor plans to ensure safe and efficient delivery</li> <li>Coordinate with operations teams, EPC contractors, and internal stakeholders</li> <li>Support site-based execution planning and problem solving during implementation</li> </ul> <h4>Requirements</h4> <ul> <li>Strong experience in LNG brownfield projects within oil and gas facilities</li> <li>Demonstrated background in demolition, revamp, and modification scopes</li> <li>Strong construction planning capability, including sequencing and workpack development</li> <li>Practical understanding of PTW systems, isolations, and SIMOPS environments</li> <li>Hands-on site experience in construction or execution environments</li> <li>Strong knowledge of constructability, lifting operations, and logistics constraints</li> <li>Experience working with major oil and gas operators preferred</li> <li>Strong communication, coordination, and stakeholder management skills</li> <li>Ability to work in high-pressure, live plant environments</li> <li>Owner's mindset with ability to influence EPC contractors and execution teams</li> <li>Willingness and ability to mobilise to Qatar at short notice</li> </ul> <h4>Additional information</h4> <ul> <li>Exposure to major LNG brownfield operations</li> <li>Role requires significant site-based involvement across Oman and Qatar</li> <li>Fast mobilisation required</li> </ul></p><p></p>

<p><h4>Overview</h4> <p>An opportunity is available for an experienced LNG subject matter expert to support major brownfield modification and execution activities across onshore LNG facilities in Oman and Qatar. This role focuses on construction planning, execution sequencing, and operational interface management within live plant environments.<br> You will act in a key advisory capacity, supporting EPC execution while ensuring safe, efficient, and well-coordinated delivery in complex operational settings.</p> <h4>Key responsibilities</h4> <ul> <li>Provide subject matter expertise across LNG brownfield execution and modification works</li> <li>Support demolition, revamp, and major facility modification activities</li> <li>Develop construction sequencing and execution logic aligned with isolations and area handovers</li> <li>Link execution sequencing to work packs, job cards, and field execution plans</li> <li>Review and support planning of SIMOPS activities within live operating environments</li> <li>Ensure effective application of PTW systems, isolations, and operational constraints</li> <li>Assess constructability including access, lifting strategies, and logistics planning</li> <li>Provide field-based input into execution planning and readiness reviews</li> <li>Review EPC execution strategies and provide guidance from an owner's perspective</li> <li>Challenge and validate contractor plans to ensure safe and efficient delivery</li> <li>Coordinate with operations teams, EPC contractors, and internal stakeholders</li> <li>Support site-based execution planning and problem solving during implementation</li> </ul> <h4>Requirements</h4> <ul> <li>Strong experience in LNG brownfield projects within oil and gas facilities</li> <li>Demonstrated background in demolition, revamp, and modification scopes</li> <li>Strong construction planning capability, including sequencing and workpack development</li> <li>Practical understanding of PTW systems, isolations, and SIMOPS environments</li> <li>Hands-on site experience in construction or execution environments</li> <li>Strong knowledge of constructability, lifting operations, and logistics constraints</li> <li>Experience working with major oil and gas operators preferred</li> <li>Strong communication, coordination, and stakeholder management skills</li> <li>Ability to work in high-pressure, live plant environments</li> <li>Owner's mindset with ability to influence EPC contractors and execution teams</li> <li>Willingness and ability to mobilise to Qatar at short notice</li> </ul> <h4>Additional information</h4> <ul> <li>Exposure to major LNG brownfield operations</li> <li>Role requires significant site-based involvement across Oman and Qatar</li> <li>Fast mobilisation required</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Mace combines construction expertise with consultancy to unlock potential in every person or project and redefine the boundaries of ambition. Our values shape the way we consult and define the people we want to join us on our journey.</span></p><br><p><span><strong>The project:</strong></span></p><br><p><span>This is an opportunity to work on one of the largest programmes in Saudi Arabia. This unique project consists of major mixed-use development including sports facilities, entertainment, and arts along with all associated infrastructure.</span></p><br><p><span>Delivers cost management services across the full project lifecycle, supporting both new and ongoing commissions. Applies strong technical expertise and professional capability to achieve successful outcomes across a range of sectors and specialisms.</span></p><br><p><span><strong>You’ll be responsible for:</strong></span></p><br><p><span>•&nbsp;&nbsp;&nbsp;&nbsp;Managing all post-contract quantity surveying and commercial activities across the project.&nbsp;</span><br><span>•&nbsp;&nbsp;&nbsp;&nbsp;Administering construction contracts and ensuring contractual compliance by all parties.&nbsp;</span><br><span>•&nbsp;&nbsp;&nbsp;&nbsp;Preparing, reviewing, and assessing interim payment applications and payment certifications.&nbsp;</span><br><span>•&nbsp;&nbsp;&nbsp;&nbsp;Evaluating variations, change orders, claims, and extension of time submissions.&nbsp;</span><br><span>•&nbsp;&nbsp;&nbsp;&nbsp;Conducting cost analysis, forecasting, and reporting throughout the project lifecycle.&nbsp;</span><br><span>•&nbsp;&nbsp;&nbsp;&nbsp;Monitoring project budgets and identifying commercial risks and mitigation measures.&nbsp;</span><br><span>•&nbsp;&nbsp;&nbsp;&nbsp;Supporting the preparation of monthly commercial reports and cost dashboards.&nbsp;</span><br><span>•&nbsp;&nbsp;&nbsp;&nbsp;Reviewing contractor valuations and ensuring accurate financial records are maintained.&nbsp;</span><br><span>•&nbsp;&nbsp;&nbsp;&nbsp;Providing commercial advice to project stakeholders and supporting informed decision-making.&nbsp;</span><br><span>•&nbsp;&nbsp;&nbsp;&nbsp;Collaborating closely with project management, design, and construction teams to ensure commercial objectives are achieved.&nbsp;</span><br><span>•&nbsp;&nbsp;&nbsp;&nbsp;Contributing to the maintenance of robust cost control procedures and governance frameworks</span></p><br><p><span><strong>You'll need to have:</strong></span><br><span>•&nbsp;&nbsp;&nbsp;&nbsp;Degree in quantity surveying, cost management, or equivalent qualification.</span><br><span>•&nbsp;&nbsp;&nbsp;&nbsp;Strong commercial acumen with contract administration and cost management expertise.</span><br><span>•&nbsp;&nbsp;&nbsp;&nbsp;Proven stakeholder management experience and understanding of sustainability principles.</span></p><br><p><br><span><strong>Our values</strong></span></p><br><p><span><strong>Safety first - Going home safe and well:</strong> We champion a safe, diverse, and inclusive working environment, understanding the importance of well-being in every team.</span></p><br><p><span><strong>Client focus - Deliver on our promise:</strong> We own the quality of deliverables and strategic outcomes and build long-term relationships with our clients.</span></p><br><p><span><strong>Integrity - Always do the right thing:</strong> We influence positive outcomes within our industry while always aligning with our compliance obligations.</span></p><br><p><span><strong>Create opportunity - For our people to excel:</strong> We champion a continuous improvement culture throughout all activities, inspiring our people and teams to develop.</span></p><br><p><br><span>Mace is an inclusive employer and welcomes interest from a diverse range of candidates. Even if you feel you do not fulfill all the criteria, please apply, as you may still be the best candidate for this role or another role within our organisation.</span></p><br><p><span>We are also open to discussing part-time, flexible, and hybrid working options if suitable within the role.</span></p><br><p><span>#LI-Onsite</span><br>&nbsp;</p><br> </div>

<p>We are seeking an experienced and strategic Finance Manager to oversee the financial operations of our organization in Salalah, Oman. The successful candidate will be responsible for financial planning, budgeting, reporting, compliance, and ensuring strong financial controls while partnering with senior management to support business growth. This role is ideal for a finance professional with excellent analytical skills, leadership experience, and a strong understanding of financial management and regulatory compliance.</p><p>Key Responsibilities</p><ul><li>Lead the company's financial planning, budgeting, and forecasting processes.</li><li>Prepare monthly, quarterly, and annual financial statements and management reports.</li><li>Monitor cash flow, working capital, and liquidity to ensure financial stability.</li><li>Develop and maintain internal financial controls, policies, and procedures.</li><li>Ensure compliance with local tax regulations, statutory requirements, and financial reporting standards.</li><li>Manage accounts payable, accounts receivable, payroll, and general ledger activities.</li><li>Coordinate annual audits and liaise with external auditors, banks, and regulatory authorities.</li><li>Analyze financial performance and provide recommendations to improve profitability and operational efficiency.</li><li>Support senior management with strategic financial planning and business decision-making.</li><li>Lead, mentor, and develop the finance team.</li></ul><p>Bachelor's degree in Finance, Accounting, Economics, or a related field.</p><p>Professional qualification such as ACCA, CPA, CA, or CMA is highly preferred.</p><p>Minimum 5 years of experience in finance or accounting, with at least 2 years in a Finance Manager or similar leadership role .</p><p>Proven experience managing corporate treasury functions, including cash flow forecasting, liquidity planning, working capital management, and banking relationships.</p><p>Hands-on experience securing debt financing, negotiating banking facilities, or raising funds through financial institutions or other funding sources is highly preferred.</p><p>Strong knowledge of financial reporting, budgeting, forecasting, and cash flow management.</p><p>Experience with ERP systems and advanced Microsoft Excel skills.</p><p>Strong analytical, organizational, and problem-solving abilities.</p><p>Excellent communication and leadership skills.</p><p>Experience working in Oman or GCC countries is an advantage.</p><p>Fluent in English; Arabic is a plus.</p><p>Opportunity to join a growing organization with long-term career prospects.</p><p>Collaborative and professional working environment.</p><p>Competitive compensation and benefits package.</p><p>Professional development and career advancement opportunities.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Finance, Accounting, Economics, or a related field.</li><li>Professional qualification such as ACCA, CPA, CA, or CMA is highly preferred.</li><li>Minimum 5 years of experience in finance or accounting, with at least 2 years in a Finance Manager or similar leadership role .</li><li>Proven experience managing corporate treasury functions, including cash flow forecasting, liquidity planning, working capital management, and banking relationships.</li><li>Hands-on experience securing debt financing, negotiating banking facilities, or raising funds through financial institutions or other funding sources is highly preferred.</li><li>Strong knowledge of financial reporting, budgeting, forecasting, and cash flow management.</li><li>Experience with ERP systems and advanced Microsoft Excel skills.</li><li>Strong analytical, organizational, and problem-solving abilities.</li><li>Excellent communication and leadership skills.</li><li>Experience working in Oman or GCC countries is an advantage.</li><li>Fluent in English; Arabic is a plus.</li></ul>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> The avionics technician (F-16 Block 50+) fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of instrumentation including: area surveillance, telemetry, radar, or global positioning system (GPS) metric track (MT). Conducts special technical studies and reports regarding instrumentation configuration, acceptance, and/or performance.</p> <p><strong>Job description:</strong></p> <ul> <li>Perform or supervise functions involving installation, repair, testing, and modification on NAV attack, flight controls radar, SMS, Comm/Nav and ECM systems.</li> <li>Operate avionics systems by using aircraft controls to determine operational condition.</li> <li>Interpret equipment operating characteristics to isolate malfunctions in systems such as attack control, radar infrared, laser, instruments, displays, flight control, communication, navigation, satellite communications, identification, defensive and offensive ECM systems.</li> <li>Use technical data wiring diagrams, electronic measurement equipment, AGE/GSE, and special tools.</li> <li>Remove and install components.</li> <li>Perform and supervise alignment calibration and bore sight of avionics systems.</li> <li>Upload operational software into system components.</li> <li>Inspect, analyze, and evaluate avionics systems.</li> <li>Interpret inspection findings and determine adequacy of corrective actions.</li> <li>Review maintenance management publications and procedures.</li> <li>Recommend methods to improve equipment performance and maintenance procedures.</li> <li>Perform on-the-job training and instruction; supervise and accept work performed by RAFO technicians.</li> </ul> <p><strong>Minimum requirements:</strong></p> <ul> <li>5 years F-16 Block 50+ or 8 years supporting F-16 aircraft.</li> <li>AFSC 2A3X4, 2A354, or 2A374 F-16 Block 50 integrated avionics or equivalent.</li> <li>Performed and/or supervised functions involving installation, repair, testing, and modification on F-16 Block 50 and up avionics systems.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma.</li> </ul> <p><strong>Clearance requirements:</strong><br> Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <p><strong>Physical/preferred qualifications:</strong></p> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Exposure to disagreeable fumes and to cuts and bruises from using tools in close places and hazards of moving vehicles such as forklifts in the shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul></p><p></p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> The avionics technician (F-16 Block 50+) fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of instrumentation including: area surveillance, telemetry, radar, or global positioning system (GPS) metric track (MT). Conducts special technical studies and reports regarding instrumentation configuration, acceptance, and/or performance.</p> <p><strong>Job description:</strong></p> <ul> <li>Perform or supervise functions involving installation, repair, testing, and modification on NAV attack, flight controls radar, SMS, Comm/Nav and ECM systems.</li> <li>Operate avionics systems by using aircraft controls to determine operational condition.</li> <li>Interpret equipment operating characteristics to isolate malfunctions in systems such as attack control, radar infrared, laser, instruments, displays, flight control, communication, navigation, satellite communications, identification, defensive and offensive ECM systems.</li> <li>Use technical data wiring diagrams, electronic measurement equipment, AGE/GSE, and special tools.</li> <li>Remove and install components.</li> <li>Perform and supervise alignment calibration and bore sight of avionics systems.</li> <li>Upload operational software into system components.</li> <li>Inspect, analyze, and evaluate avionics systems.</li> <li>Interpret inspection findings and determine adequacy of corrective actions.</li> <li>Review maintenance management publications and procedures.</li> <li>Recommend methods to improve equipment performance and maintenance procedures.</li> <li>Perform on-the-job training and instruction; supervise and accept work performed by RAFO technicians.</li> </ul> <p><strong>Minimum requirements:</strong></p> <ul> <li>5 years F-16 Block 50+ or 8 years supporting F-16 aircraft.</li> <li>AFSC 2A3X4, 2A354, or 2A374 F-16 Block 50 integrated avionics or equivalent.</li> <li>Performed and/or supervised functions involving installation, repair, testing, and modification on F-16 Block 50 and up avionics systems.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma.</li> </ul> <p><strong>Clearance requirements:</strong><br> Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <p><strong>Physical/preferred qualifications:</strong></p> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Exposure to disagreeable fumes and to cuts and bruises from using tools in close places and hazards of moving vehicles such as forklifts in the shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul></p><p></p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <h4>Position overview:</h4> <p>The F-16 C/D Electrical and Environmental (E&E) Specialist fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and when necessary, modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of system components.</p> <h4>Duties & responsibilities:</h4> <ul> <li>Performs and supervises aircraft electrical and environmental (E&E) functions and activities performing as an experienced 5 Level Journeyman or 7 Level Craftsman.</li> <li>Troubleshoots, inspects, removes, installs, repairs, modifies, overhauls, and operates aircraft E&E systems, components, and associated support equipment.</li> <li>Uses technical data, wiring diagrams, ohm meters, electronic measuring equipment, GSE and special tools. Expert level in accomplishing and training of wire repair procedures.</li> <li>Uploads operational software, flight programs (OFP) into system components and maintains currency and software upgrade efficiency.</li> <li>Expert level to inspect, analyze and evaluate electrical and environmental systems malfunctions, aircraft heating/air conditioning, avionics cooling, cabin pressure, OBOGS, fire and overheat detection systems, AC power system, DC power system, external power system, lighting system to include exterior, interior, emergency, position lights, anti-collision, formation, slipway lights, taxi light.</li> <li>Remove, install, adjust, operational check, bench-check, service the following: landing gear system, handle, control switches, arresting hook indication/canopy indication/overheat fire/master caution/fuel warning and control systems, anti-skid, brake holding, nose gear steering, secondary flight control, engine bleed air, fire extinguishing system, squibs, fire bottles, start and ignition/air conditioning/pressurization systems and liquid cooling systems.</li> <li>Interprets inspection findings and determines adequacy of corrective actions.</li> <li>Reviews maintenance management publications, time compliance technical orders and procedures for accuracy and currency, confirms corrective actions and accuracy of aircraft maintenance records.</li> <li>Recommends methods to improve equipment performance and maintenance procedures. Acts as quality assurance for the trade.</li> <li>Performs OJT and instruction, supervises and accepts work performed by RAFO technicians, acts as supervisor and mentor for the shop and directs daily maintenance performed.</li> <li>Required to perform assigned tasks within your work center that directly supports necessary functions of this job classification.</li> </ul> <h4>Requirements:</h4> <ul> <li>Recent, 5 years F-16 electrical and environmental (E&E) Block 40 or above experience.</li> <li>Very experienced 2A6X6 5 level or 7 skill level or equivalent with proven record of F-16 flightline (Organizational) or back shop (Intermediate) maintenance environment.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma or equivalent required.</li> <li>Current passport.</li> <li>Clearance requirements: Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</li> </ul> <h4>Preferences:</h4> <ul> <li>Air Force AFSC 2A656 or 2A676 with F-16 Block 30/50 experience.</li> <li>Block 50 experience.</li> </ul></p><p></p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <h4>Position overview:</h4> <p>The F-16 C/D Electrical and Environmental (E&E) Specialist fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and when necessary, modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of system components.</p> <h4>Duties & responsibilities:</h4> <ul> <li>Performs and supervises aircraft electrical and environmental (E&E) functions and activities performing as an experienced 5 Level Journeyman or 7 Level Craftsman.</li> <li>Troubleshoots, inspects, removes, installs, repairs, modifies, overhauls, and operates aircraft E&E systems, components, and associated support equipment.</li> <li>Uses technical data, wiring diagrams, ohm meters, electronic measuring equipment, GSE and special tools. Expert level in accomplishing and training of wire repair procedures.</li> <li>Uploads operational software, flight programs (OFP) into system components and maintains currency and software upgrade efficiency.</li> <li>Expert level to inspect, analyze and evaluate electrical and environmental systems malfunctions, aircraft heating/air conditioning, avionics cooling, cabin pressure, OBOGS, fire and overheat detection systems, AC power system, DC power system, external power system, lighting system to include exterior, interior, emergency, position lights, anti-collision, formation, slipway lights, taxi light.</li> <li>Remove, install, adjust, operational check, bench-check, service the following: landing gear system, handle, control switches, arresting hook indication/canopy indication/overheat fire/master caution/fuel warning and control systems, anti-skid, brake holding, nose gear steering, secondary flight control, engine bleed air, fire extinguishing system, squibs, fire bottles, start and ignition/air conditioning/pressurization systems and liquid cooling systems.</li> <li>Interprets inspection findings and determines adequacy of corrective actions.</li> <li>Reviews maintenance management publications, time compliance technical orders and procedures for accuracy and currency, confirms corrective actions and accuracy of aircraft maintenance records.</li> <li>Recommends methods to improve equipment performance and maintenance procedures. Acts as quality assurance for the trade.</li> <li>Performs OJT and instruction, supervises and accepts work performed by RAFO technicians, acts as supervisor and mentor for the shop and directs daily maintenance performed.</li> <li>Required to perform assigned tasks within your work center that directly supports necessary functions of this job classification.</li> </ul> <h4>Requirements:</h4> <ul> <li>Recent, 5 years F-16 electrical and environmental (E&E) Block 40 or above experience.</li> <li>Very experienced 2A6X6 5 level or 7 skill level or equivalent with proven record of F-16 flightline (Organizational) or back shop (Intermediate) maintenance environment.</li> <li>Must be willing to train to other aircraft maintenance tasks as required.</li> <li>High school diploma or equivalent required.</li> <li>Current passport.</li> <li>Clearance requirements: Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</li> </ul> <h4>Preferences:</h4> <ul> <li>Air Force AFSC 2A656 or 2A676 with F-16 Block 30/50 experience.</li> <li>Block 50 experience.</li> </ul></p><p></p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> Keeps airplane in safe working condition by servicing engines, engine components, and airframe components. Performs routine troubleshooting, installation, repair, and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance. Responsible for all maintenance performed on the assigned aircraft.</p> <h4>Job description:</h4> <ul> <li>This includes but is not limited to major maintenance such as landing gear replacement, flight control replacement, and accomplishing periodical inspections.</li> <li>Maintains tactical aircraft, support equipment, and forms and records. Performs and supervises flight chief, expediter, crew chief, repair and reclamation, quality assurance, and maintenance support functions.</li> <li>Services aircraft. Performs end-of-runway, postflight, preflight, thru-flight, and phase inspections. Performs integrated combat turns and hot pit refuels.</li> <li>Provides for the launch, recovery, and preflight, thru-flight, and BPO inspections, ground handling, minor maintenance, and servicing.</li> <li>Advises on problems maintaining, servicing, and inspecting aircraft and related aerospace equipment.</li> <li>Uses technical data to diagnose and solve maintenance problems on aircraft systems.</li> <li>Interprets and advises on maintenance procedures and policies to repair aircraft and related equipment.</li> <li>Troubleshoots and maintains aircraft structures, systems, components, and related equipment. Removes and installs aircraft components.</li> <li>Conducts functional tests of repaired components and systems. Adjusts, aligns, and rigs aircraft systems.</li> <li>Supervises and performs aircraft jacking, lifting, and towing operations.</li> <li>Inspects aircraft structures, systems, components, and related systems.</li> <li>Supervises and performs aircraft and component inspections.</li> <li>Interprets inspection findings and determines adequacy of corrective actions.</li> <li>Inspects and checks components for clearances, tolerances, proper installation, and operation.</li> <li>Inspects and operates powered and nonpowered aerospace ground equipment.</li> <li>Inspects and identifies aircraft corrosion for prevention and repair.</li> <li>Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.</li> <li>Inventories and maintains aircraft equipment.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Minimum of 3-5 years' experience on like aircraft.</li> <li>High school graduate or GED with a certificate of completion.</li> <li>Experience in all aspects of intermediate level maintenance on F-16 Block 50 aircraft.</li> <li>Experience in phase inspections and all aspects of scheduled maintenance.</li> <li>Experience in inspection and troubleshooting of any systems failures.</li> <li>Experience providing on-the-job training (OJT) to technicians.</li> <li>Experience with landing gear overhaul, inspection, and operational checks.</li> </ul> <h4>Clearance requirements:</h4> <p>Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <h4>Physical requirements/working environment:</h4> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and cuts and bruises from using tools in close proximity and hazards of moving vehicles such as forklifts in the shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> </ul></p><p></p>

<p><h4>Accepting applications - pending contract award and funding CY2026</h4> <p><strong>Position summary:</strong><br> Keeps airplane in safe working condition by servicing engines, engine components, and airframe components. Performs routine troubleshooting, installation, repair, and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance. Responsible for all maintenance performed on the assigned aircraft.</p> <h4>Job description:</h4> <ul> <li>This includes but is not limited to major maintenance such as landing gear replacement, flight control replacement, and accomplishing periodical inspections.</li> <li>Maintains tactical aircraft, support equipment, and forms and records. Performs and supervises flight chief, expediter, crew chief, repair and reclamation, quality assurance, and maintenance support functions.</li> <li>Services aircraft. Performs end-of-runway, postflight, preflight, thru-flight, and phase inspections. Performs integrated combat turns and hot pit refuels.</li> <li>Provides for the launch, recovery, and preflight, thru-flight, and BPO inspections, ground handling, minor maintenance, and servicing.</li> <li>Advises on problems maintaining, servicing, and inspecting aircraft and related aerospace equipment.</li> <li>Uses technical data to diagnose and solve maintenance problems on aircraft systems.</li> <li>Interprets and advises on maintenance procedures and policies to repair aircraft and related equipment.</li> <li>Troubleshoots and maintains aircraft structures, systems, components, and related equipment. Removes and installs aircraft components.</li> <li>Conducts functional tests of repaired components and systems. Adjusts, aligns, and rigs aircraft systems.</li> <li>Supervises and performs aircraft jacking, lifting, and towing operations.</li> <li>Inspects aircraft structures, systems, components, and related systems.</li> <li>Supervises and performs aircraft and component inspections.</li> <li>Interprets inspection findings and determines adequacy of corrective actions.</li> <li>Inspects and checks components for clearances, tolerances, proper installation, and operation.</li> <li>Inspects and operates powered and nonpowered aerospace ground equipment.</li> <li>Inspects and identifies aircraft corrosion for prevention and repair.</li> <li>Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.</li> <li>Inventories and maintains aircraft equipment.</li> <li>Knowledge of military and/or company forms required by work specifications is a plus.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Minimum of 3-5 years' experience on like aircraft.</li> <li>High school graduate or GED with a certificate of completion.</li> <li>Experience in all aspects of intermediate level maintenance on F-16 Block 50 aircraft.</li> <li>Experience in phase inspections and all aspects of scheduled maintenance.</li> <li>Experience in inspection and troubleshooting of any systems failures.</li> <li>Experience providing on-the-job training (OJT) to technicians.</li> <li>Experience with landing gear overhaul, inspection, and operational checks.</li> </ul> <h4>Clearance requirements:</h4> <p>Must be able to obtain and maintain facility credentials/authorization. US citizenship is required for facility credentials/authorization to work at this facility.</p> <h4>Physical requirements/working environment:</h4> <ul> <li>Frequently lifts parts and equipment up to 25 pounds.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and cuts and bruises from using tools in close proximity and hazards of moving vehicles such as forklifts in the shop area.</li> <li>While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li> <li>The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li> <li>The employee is occasionally required to sit, climb, or balance.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide guidance and support in monitoring compliance with project implementation plans to ensure efficient and effective resourcing for projects. Develop and recommend required changes to the policies, processes and systems for project implementation and support the monitoring of adherence to policies, procedures and systems. Support the implementation of digital tools and systems that enhance project monitoring, reporting, and decision-making. Support the resolution of contractual and commercial issues with consultants and contractors, ensuring protection of the company s interests. Review monthly, quarterly and annual performance reports as required to management and board of directors to facilitate decision-making. Provide support in defining and enhancing project objectives in alignment with the corporate objectives to ensure effective and efficient execution. Participate in the formulation of the long-term organizational strategy and business plan by providing inputs from project execution and studies . Participate in the development of technical specifications and scope of work and participate in negotiation of contract terms and conditions between the Company and the Consultants/contractors to ensure fairness and in the interest of the company and compliance to the Company s standard policies and procedures. Provide support and review in the finalisation of the budget for the department/section and monitor budget as required. Provide support and review in the preparation of business cases for deviations from budget/expenditures on unplanned activities. Formation of and leading teams as required for undertaking specific tasks identified by CPO. Lead and guide team by providing technical guidance, training and necessary growth opportunities to ensure that members are given the opportunity to be developed for higher-level roles. Develop positive relationships with key stakeholders, expand professional network of key personnel in the industry and sector to ensure cooperation and alignment to the company objectives and add brand value Receive feedback or attend to queries and issues from various departments within the company and stakeholders where applicable in order to provide solutions and overcome the challenges faced by OPWP Anticipate stakeholder concerns and manage expectations through transparent communication and proactive engagement strategies. Enhance the company s brand value and reputation by demonstrating professionalism, responsiveness, and strong leadership in stakeholder interactions. Provide guidance to develop the HSE standards of the company and adhere to them at all times. Review projects HSE performance and provide guidance to project team to take necessary actions to improve the HSE management during project development and implementation. Support the investigation of major HSE incidents and ensure effective implementation of corrective and preventive actions. Adhere to Company policies and procedures at all times. Advise and guide the team in the drafting of request for proposal for Consultants, liaising with the Procurement team for all critical approvals in order to release tenders on time and receive proposals from Bidders. Participate as and when required in the selection of consultants and contractors (where applicable) for projects and provide support in monitoring their performance against contract requirements. Analyse different options available for executing projects and the potential risks associated with the options. Recommend options that align with objectives with minimum potential risks. Provide guidance and support as required to facilitate the handover of projects to Contracts Management Department Provide support and strategic inputs when critical project issues arise and oversee the implementation of decisions aligned with meeting project and company objectives. Devise processes to share learning s from project development and implementation amongst the team members and throughout the organization to encourage a learning culture and develop better solutions in the future Provide guidance and support on the review of delay events, concurrency issues, and entitlement for extension of time (EOT).</p></div></section>

<p>The Livestock Husbandry Officer is responsible for planning, implementing, monitoring, and improving livestock production systems with a focus on animal nutrition, fodder production, herd health management, milk production, meat production, animal welfare, and farm productivity. The position supports the development of sustainable and climate-resilient livestock systems in Oman while ensuring compliance with national veterinary, food safety, and biosecurity regulations. The position ensures data collection and reporting by maintaining livestock production databases and farm records, analyzing production, health, and economic performance indicators, preparing technical reports, progress reports, and recommendations, supporting livestock sector assessments and feasibility studies and contributing to national livestock development initiatives and projects.</p><p><strong>ENGAGEMENT</strong></p><ul><li>Coordinate stakeholder engagement with government agencies, private-sector actors, financial institutions, and development partners to ensure coordinated delivery and alignment with national priorities.</li><li>Foster coherent collaboration across program staff and stakeholders to ensure complementarity, transparency, and efficient joint implementation.</li><li>Promote a team culture aligned with GGGI s values of Trust, Transparency, Respect, and Partnership.</li><li>Report directly to the Chief of Party on livestock husbandry-related activities and coordination with other workstreams.</li><li>Represent the program in meetings, workshops, and calls as delegated, ensuring effective follow-up and timely documentation.</li></ul><p><strong>DELIVERY</strong></p><ul><li><strong>Livestock Production Management:</strong> Provide technical support for cattle, camel, and small ruminant production systems; monitor herd performance indicators (growth, mortality, reproduction, milk yield, and meat efficiency); and assist stakeholders in adopting improved breeds and production technologies.</li><li><strong>Feed, Nutrition, and Fodder Management:</strong> Formulate balanced, cost-effective rations and introduce alternative, climate-smart feed resources and conservation techniques (silage and hay) suited for arid environments. Assess fodder availability to develop sustainable production plans including Rhodes grass, Alfalfa, Sorghum, Maize silage, and hydroponics that reduce reliance on imported feed while optimizing water management.</li><li><strong>Animal Health, Biosecurity and Dairy/Meat Development:</strong> Partner with veterinary teams to implement disease prevention, vaccination, and biosecurity protocols while ensuring compliance with Omani notifiable disease reporting and antimicrobial stewardship. Monitor dairy/meat performance to improve milk hygiene, mastitis control, fattening programs, and carcass quality.</li><li><strong>Capacity Building and Extension Services:</strong> Deliver targeted training manuals, guidelines, and climate-smart livestock extension programs for farmers, cooperatives, and local personnel, with a specific focus on mainstreaming women and youth participation across livestock value chains.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in: Animal Science, Animal Production, Livestock Production, Veterinary Science, Agricultural Science (Livestock Specialization)</li><li>Preferred: Master's degree in animal nutrition, ruminant production, dairy science, veterinary public health, or related field.</li><li>6-8 years of relevant experience in livestock production, husbandry, and farm management</li><li>Proven practical experience in dairy and/or meat production systems, feed formulation, and fodder production under arid or semi-arid environments.</li><li>Familiarity of animal health management and biosecurity practices, and smallholder/commercial livestock operations</li><li>Experience in arid and semi-arid environments.</li><li>Experience in GCC countries, particularly Oman.</li><li>Experience in donor-funded agricultural development projects.</li><li>Fluency in English (written and spoken) is required. Knowledge of Arabic is an asset.</li></ul><p><strong>FUNCTIONAL</strong></p><ul><li>Strong ability to interpret, outline and implement guidelines, policies, and procedures effectively.</li><li>Excellent interpersonal skills to manage diverse stakeholder needs and foster collaboration.</li><li>Strategic thinker with capacity for joint problem-solving and decision-making.</li><li>Highly organized, detail-oriented, and able to prioritize under time constraints.</li><li>Demonstrates creativity, innovation, flexibility, and entrepreneurial mindset in achieving outputs.</li><li>Comfortable working independently and within a team environment.</li><li>Excellent interpersonal and facilitation skills, capable of translating complex concepts around bioeconomy to a wider audience.</li><li>Proven experience in mainstreaming safeguards, gender, poverty reduction, and social inclusion in project delivery.</li></ul><p><strong>CORPORATE</strong></p><ul><li>Understand and actively support GGGI's mission, vision and values.</li><li>Promote an organizational culture of trust, transparency, respect and partnership.</li><li>Excel at problem solving, ask questions and seek support when needed, easily share information and knowledge with others both internally as externally.</li><li>Manage emotions and stress positively, build rapport and resolve conflict easily.</li><li>Strong ability to work independently and/or remotely, while maintaining productivity.</li><li>Be able to lead and manage a program workstream independently, while knowing when to seek advice and liaise closely with the relevant GGGI structures.</li></ul>

<p><h4>Job Description</h4> <p>The Power Gen Mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with Maintenance Action Sheets, Air Force Technical Orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of Bare Base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including Work Orders, USAF Supply and Amentum forms and update Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs Temporary Duty (TDY) in the Area of Operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense Agencies Contingency Systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred but not required.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>The Power Gen Mechanic operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems. Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).</p> <h4>Principal Accountabilities</h4> <ul> <li>Examines electrical equipment and systems for damages, corrosion and operation.</li> <li>Connects and utilizes test equipment and meters such as voltmeters, ammeters, megohmmeters and oscilloscopes.</li> <li>Uses common hand tools, tubing and conduit benders, hand and motor operated conduit threading machines, soldering irons and grounding systems.</li> <li>Erects, repairs and services electrical power distribution systems and equipment.</li> <li>Operates, maintains, tests, repairs, services and stores electrical generating equipment, water distribution systems, flood lights, air compressors and aircraft arresting systems.</li> <li>Bench checks repairable components, subassemblies and solid-state components by using test equipment, load bands and other equipment as may be required by technical data.</li> <li>Tests required gauges and meters to assure accuracy and reliability.</li> <li>Interprets electrical drawings, schematics, blueprints and maintenance malfunction data related to assigned equipment to prevent potential systems failure.</li> <li>Analyzes malfunctions by inspection, observation of operation and use of test equipment.</li> <li>Repairs, inspects, fabricates, cleans, operates, maintains, corrosion controls, reconstitutes and prepares BEAR assets/equipment air/sea/road haul shipments in accordance with Maintenance Action Sheets, Technical Orders, Manuals, Checklists, Regulations, Maintenance Action Sheets and Unit Type Code (UTC) Configuration listings.</li> <li>Performs required inspections and scheduled maintenance, troubleshoots repair situations and performs other maintenance on all assigned equipment.</li> <li>Interprets electrical drawings, schematics and blueprints.</li> <li>Conforms to USAF/Amentum safety, hazardous material and quality standards.</li> <li>Performs maintenance in accordance with Maintenance Action Sheets, Air Force Technical Orders and Amentum directives.</li> <li>Assists in the erection, construction and operation of Bare Base power generation and associated equipment to support real world exercises and contingencies.</li> <li>Performs servicing and/or maintenance of in-use assets as required.</li> <li>Ensures all tools, personal protective equipment and clothing issued remain safe, secure and serviceable, reporting any deficiencies.</li> <li>Prepares and completes documentation including Work Orders, USAF Supply and Amentum forms and update Maximo.</li> <li>Operates material handling equipment as required.</li> <li>Inspects hazardous materials within the assigned work center and coordinates with the appropriate office for the disposal of HAZMAT when required.</li> <li>Performs other tasks and duties as directed by Amentum/USAF tasking.</li> <li>May be required to assist in other departments when directed or requested to accomplish a specific task or project.</li> <li>Performs Temporary Duty (TDY) in the Area of Operations as required by USAF/Amentum tasking.</li> <li>Performs other duties as assigned.</li> <li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have organizational skills and be able to understand, speak, read and write English at a beginner level.</li> <li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li> <li>High school diploma or equivalent required.</li> <li>Must be experienced on high/low voltage generators and load testing or equivalent automobile mechanical experience.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.</li> <li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. and performing extensive work handling/lifting equipment.</li> <li>Must be able to travel domestically and internationally.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Ability to read and understand technical data, plans/blueprints and publications pertaining to BOB assets or similar Department of Defense Agencies Contingency Systems preferred.</li> <li>Maximo experience is preferred but not required.</li> <li>Hands-on experience with BOB assets or similar Department of Defense Agencies Contingency Systems preferred but not required.</li> </ul></p><p></p>

<p><h4>Principal Accountabilities<\/h4>\n<p>The chief age mechanic supervises, trains age technicians and performs inspections, maintenance and servicing and storage of assigned age. Maintains and inspects hydraulic, pneumatic, electrical and fuel systems to include turbine, diesel and gasoline driven age. Responsible for the day-to-day age shop operations and communicates with the age superintendent to assure work priorities are met. Accomplishes work in accordance with USAF\/Amentum technical data. Ensures compliance with performance work statement (PWS) and Amentum ISO 9001 quality management system (QMS).<\/p>\n<ul>\n<li>Primary supervisor to train age mechanics and perform periodic inspection, maintenance and repair actions on assigned age assets.<\/li>\n<li>Stocks, maintains and requisitions parts, tools and supplies to perform required work on assets.<\/li>\n<li>Prepares age\/FLSE and other equipment for exercises or actual deployments.<\/li>\n<li>Responds to enquiries concerning storage and status of assigned equipment.<\/li>\n<li>Utilizes testing of diagnostic equipment while troubleshooting hydraulic, electrical, fuel and pneumatic systems and components for serviceability.<\/li>\n<li>Prepares and completes documentation including work orders, US Air Force supply and Amentum forms, updates historical data and coordinates actions required with work orders.<\/li>\n<li>Directs maintenance by maintenance action sheets, US Air Force technical orders and Amentum directives.<\/li>\n<li>Develops standard for subordinates, implements the precept of quality assurance within the guidelines of the ISO 9001:2015 quality management system standard (QMS), ensures that all work is completed to quality standards and provides employees with feedback on their progress.<\/li>\n<li>Orients new personnel to work crews, plans work assignments and establishes work methods.<\/li>\n<li>Conducts on-the-job training for age mechanics on assigned age\/FLSE, safety, material safety data sheets, security awareness and other subjects. Prepares and updates training records.<\/li>\n<li>Prepares and inspects assets and equipment for shipment by air, sea and surface transportation.<\/li>\n<li>Performs servicing and maintenance of in-use assets and returns equipment to mission capable.<\/li>\n<li>Prepares and submits quality\/material deficiency reports and technical order changes as required.<\/li>\n<li>Operates material handling equipment as required.<\/li>\n<li>Inspects hazardous materials within the assigned work center and coordinates the appropriate office for the disposal of hazmat when required.<\/li>\n<li>Ensures all tools, personnel protective equipment, facilities and clothing issued remain safe, secure and serviceable, reporting any deficiencies.<\/li>\n<li>Ensures that the work area is maintained to the highest standards of cleanliness.<\/li>\n<li>Attends age staff meetings as required.<\/li>\n<li>Prepares personnel performance reports as assigned.<\/li>\n<li>Performs TDY within the area of operations as required by the US Air Force\/Amentum tasking.<\/li>\n<li>Performs other duties as assigned.<\/li>\n<li>Works in maintenance shop or warehouse environment and may be required to work outdoors for extended periods.<\/li>\n<\/ul>\n<h4>Minimum Requirements<\/h4>\n<ul>\n<li>Working knowledge of personal computers and Windows operating system and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.<\/li>\n<li>Knowledge of military or civilian maintenance systems, quality assurance and supervisory skills required.<\/li>\n<li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.<\/li>\n<li>Will be required to operate material handling equipment.<\/li>\n<li>High school diploma or equivalent required.<\/li>\n<li>Five years' experience with the US Air Force or civilian organization in the field of aircraft ground support equipment maintenance required.<\/li>\n<li>Ability to review electrical and electronic systems using wiring diagrams and schematics required.<\/li>\n<li>Practical experience of flow charts used to maintain pneumatic and hydraulic systems required.<\/li>\n<li>Must be able to obtain and maintain facility credentials\/authorization. Note: US citizenship is required for facility credentials\/authorization at this work location.<\/li>\n<li>Will be exposed to extreme noise from operating equipment.<\/li>\n<li>Will be required to wear proper personal protective equipment (PPE) according to prescribed procedures and as required for task being performed.<\/li>\n<li>Physically capable of performing all required duties; capable of lifting\/pushing\/pulling minimum of 50 lbs. and performing extensive work handling\/lifting equipment.<\/li>\n<li>Ability to travel domestically and internationally.<\/li>\n<\/ul>\n<h4>Preferred Qualifications<\/h4>\n<ul>\n<li>Training to a 7 level as aircraft ground support equipment technician through an apprentice or military service program preferred.<\/li>\n<li>Ideal candidate will have training as a USAF age, \"RED X Certified\" inspector.<\/li>\n<\/ul><\/p><p><\/p>