Air Conditioning Technician Jobs

<p><strong>Job Title: Security Cameras and Networking Systems Technician (Low Voltage)</strong></p><p><strong>Responsibilities:</strong></p><ul><li>Installation, operation, and maintenance of surveillance cameras.</li><li>Installation, extension, and programming of network systems and low-voltage systems.</li><li>Diagnostics of faults and performing necessary maintenance.</li><li>Preparation and installation of network devices and linking them together.</li><li>Reading drawings and executing tasks according to technical specifications.</li><li>Testing systems and ensuring proper operation.</li><li>Preparing maintenance reports and completed works.</li></ul><p><strong>Requirements:</strong></p><ul><li>Appropriate technical qualification.</li><li>Experience in installing and maintaining surveillance cameras and network systems.</li><li>Good knowledge of low-voltage systems.</li><li>Ability to handle networking and surveillance devices.</li><li>Commitment, accuracy, and ability to work in the field.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform installation, maintenance, and repair of air-cooled and water-cooled chillers. Diagnose and troubleshoot mechanical and electrical faults in HVAC and chiller systems. Carry out preventive and corrective maintenance as per maintenance schedules. Inspect compressors, condensers, evaporators, pumps, valves, and cooling towers. Check refrigerant levels, identify leaks, and carry out refrigerant charging and recovery. Maintain AHUs, FCUs, pumps, and associated HVAC equipment. Read and interpret technical drawings, wiring diagrams, and service manuals.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position Summary We are seeking a skilled Multiskilled Technician (AC Base) to perform maintenance, troubleshooting, and repair activities for air conditioning systems and related building services. In this role, you will support preventive and corrective maintenance across HVAC, electrical, and basic mechanical systems to ensure efficient and reliable facility operations. Key Responsibilities Install, maintain, and repair air conditioning and HVAC systems. Perform preventive and corrective maintenance on AC units, FCUs, AHUs, and ventilation systems. Troubleshoot electrical, mechanical, and control-related issues. Conduct routine inspections and identify maintenance requirements. Support basic electrical, plumbing, and mechanical maintenance activities. Ensure compliance with safety standards and maintenance procedures. Maintain service records and maintenance reports. Respond to emergency breakdowns and service requests.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma or Technical Certification in HVAC, Refrigeration, Mechanical, Electrical, or related field .</li><li>3+ years of experience in HVAC maintenance or facility management services.</li><li>Strong knowledge of air conditioning systems, refrigeration equipment, and ventilation systems.</li><li>Basic knowledge of electrical, plumbing, and mechanical maintenance.</li><li>Ability to troubleshoot and repair HVAC equipment efficiently.</li><li>Good communication and problem-solving skills.</li><li>Valid UAE Driving License is preferred.</li><li>HVAC/Refrigeration certification or trade license.</li><li>Experience in commercial buildings, residential communities, hotels, or facility management companies.</li><li>Familiarity with preventive maintenance systems and work order management.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.<br>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: Technical, Trade, or Vocational School Degree.<br>Related Work Experience: At least 3 years of related work experience.<br>Supervisory Experience: No supervisory experience.<br>REQUIRED QUALIFICATIONS<br>License or Certification: EPA Universal Certification<br>Driver's License<br>HVAC Certification<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>W Hotels’ mission is to Ignite Curiosity, Expand Worlds. We are a place to experience life. We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels. In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p><h4>Position summary</h4> <p>Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.</p> <p>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees.</p> <p>Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings.</p> <p>Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualifications</h4> <ul> <li>Education: Technical, trade, or vocational school degree.</li> <li>Related work experience: At least 3 years of related work experience.</li> <li>Supervisory experience: No supervisory experience.</li> </ul> <h4>Required qualifications</h4> <ul> <li>License or certification: EPA Universal Certification</li> <li>Driver's license</li> <li>HVAC certification</li> </ul> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>W Hotels’ mission is to ignite curiosity, expand worlds. We are a place to experience life. We’re here to open doors and open minds. We are constantly inspired by new faces and new experiences. A tuned-in, up-for-anything spirit is at our core and has made us renowned for reinventing the norms of luxury around the globe. Whatever/Whenever is our culture and service philosophy that brings our guests’ passions to life. If you are original, innovative, and always looking towards the future of what’s possible, welcome to W Hotels.</p> <p>In joining W Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Summary: Responsible for maintenance, repair, and basic MEP work to ensure smooth kitchen operations. Key Responsibilities: Maintain and repair kitchen equipment (ovens, fryers, refrigerators, dishwashers, coffee machines) Perform preventive maintenance and troubleshoot breakdowns Handle electrical (DB, wiring, sockets, breakers), plumbing (water lines, drainage, grease traps), and mechanical/HVAC (FCU) tasks Attend breakdown calls, maintain service records, and adhere to safety and hygiene standards</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma/ITI in Electrical or Mechanical field</li><li>3 5 years of relevant experience</li><li>Strong knowledge of kitchen equipment and MEP systems</li><li>Good troubleshooting skills</li><li>Preferred Experience: Experience as a kitchen equipment technician in a five-star hotel Experience in canteen or catering company environments</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for maintenance, repair, and basic MEP work to ensure smooth kitchen operations. Key Responsibilities: Maintain and repair kitchen equipment (ovens, fryers, refrigerators, dishwashers, coffee machines) Perform preventive maintenance and troubleshoot breakdowns Handle electrical (DB, wiring, sockets, breakers), plumbing (water lines, drainage, grease traps), and mechanical/HVAC (FCU) tasks Attend breakdown calls, maintain service records, and adhere to safety and hygiene standards</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma/ITI in Electrical or Mechanical field</li><li>3 5 years of relevant experience</li><li>Strong knowledge of kitchen equipment and MEP systems</li><li>Good troubleshooting skills</li><li>Preferred Experience: Experience as a kitchen equipment technician in a five-star hotel</li><li>Experience in canteen or catering company environments</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking experienced Maintenance Technicians with a minimum of 7 years of experience in luxury residences, palaces, embassies, hotels, stadiums, commercial buildings, facilities management, oil &amp; gas, or other high-profile properties. The selected candidates will be responsible for preventive and corrective maintenance activities to ensure the safe, efficient, and uninterrupted operation of a VVIP residence. The role includes electrical, HVAC, plumbing, mechanical, and general building maintenance while maintaining the highest standards of professionalism, confidentiality, and service excellence. The position requires on-call availability for emergency maintenance requirements and involves both indoor and outdoor work, including lifting, climbing ladders, and other physical maintenance tasks.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Perform preventive and corrective maintenance of buildings, utility systems, and associated facilities.</p></li><li><p>Conduct routine inspections and identify maintenance issues before failures occur.</p></li><li><p>Carry out minor repairs on electrical, plumbing, HVAC, mechanical, carpentry, and building systems.</p></li><li><p>Maintain lighting systems, distribution boards, switches, sockets, and related equipment.</p></li><li><p>Repair plumbing fixtures, water supply systems, drainage systems, pumps, and sanitary installations.</p></li><li><p>Assist in maintaining HVAC systems, including split units, VRF systems, FCUs, AHUs, and ventilation systems.</p></li><li><p>Perform mechanical maintenance on pumps, motors, and rotating equipment.</p></li><li><p>Carry out furniture repairs and minor carpentry work.</p></li><li><p>Support maintenance of swimming pools, fountains, irrigation systems, gardens, and external facilities.</p></li><li><p>Respond promptly to emergency breakdowns and maintenance requests.</p></li><li><p>Maintain service reports, maintenance records, and spare parts inventories.</p></li><li><p>Coordinate with contractors and service providers.</p></li><li><p>Follow all HSE, security, and access-control procedures.</p></li><li><p>Maintain strict confidentiality regarding VVIP family activities and property information.</p></li></ul><p>Available Positions &amp; Requirements</p><p>AC Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Refrigeration &amp; Air-Conditioning Servicing (RAC) or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Strong knowledge of Chillers, AHUs, FCUs, CCUs, VRF Systems, and Central Plant Equipment</p></li><li><p>Experience in brazing, compressor replacement, HVAC troubleshooting, and preventive maintenance</p></li><li><p>Background in facilities management, commercial buildings, stadiums, or oil &amp; gas projects</p></li></ul><p>Electrician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Electrical Installation &amp; Maintenance or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Knowledge of MCC Panels, DBs, SMDBs, UPS Systems, Generators, and LV Systems</p></li><li><p>Strong troubleshooting and preventive maintenance experience</p></li><li><p>Experience in industrial plants, stadiums, or facilities management environments</p></li></ul><p>Electronic Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Electronics Products Assembly &amp; Servicing or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience with CCTV, BMS, PA Systems, Access Control Systems, Sliding Gates, and ELV Systems</p></li><li><p>Strong troubleshooting skills</p></li></ul><p>Fire Alarm Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Electrical/Electronics Technology or Fire Detection Systems or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience with Addressable &amp; Conventional Fire Alarm Systems, FM-200, Deluge Systems, Foam Systems, Fire Fighting Control Panels, Access Control Systems, UPS, and DC Systems</p></li><li><p>Strong fault-finding and preventive maintenance experience</p></li></ul><p>Mechanical Technician</p><p>Requirements:</p><ul><li><p>TESDA NC III in Mechanical Technology, Industrial Mechanics, or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience with CHW Pumps, Cooling Tower Gearboxes, Motors, Rotating Equipment, and Pump Alignment</p></li><li><p>Strong troubleshooting and preventive maintenance knowledge</p></li></ul><p>Plumber</p><p>Requirements:</p><ul><li><p>TESDA NC III in Plumbing or equivalent</p></li><li><p>Minimum 7 years of experience</p></li><li><p>Experience in plumbing systems, sanitary installations, water supply networks, drainage systems, and PPR piping works</p></li><li><p>Strong troubleshooting, reporting, and documentation skills</p></li></ul><p></p></section>

<p><h4>Overview of the role:</h4> <p>Ensuring overall customer satisfaction by providing excellent service experience with optimum operational cost.</p> <h4>What you will do:</h4> <p><strong>Description of accountability:</strong></p> <ul> <li>Manage AMC service to the customers.</li> <li>Provide timely periodic service to customers.</li> <li>Ensure assets are regularly maintained, reducing the risk of unexpected breakdowns or downtime.</li> <li>Coordinate with customers, technicians, and other team members to attend and resolve complaints within the prescribed timeframe.</li> <li>Update the progress of work to the customer and other relevant parties.</li> </ul> <p><strong>Business development:</strong></p> <ul> <li>Ensure 95% of customers are retained.</li> <li>Generate new AMC business.</li> <li>Generate revamp business.</li> </ul> <p><strong>Quality perspective:</strong></p> <ul> <li>Maintain service at the highest quality level with zero repetition.</li> <li>Raise and discuss recurring failures with OEM and line managers.</li> <li>Monitor the performance of team members and encourage them to improve and take bigger responsibilities by guiding or suggesting.</li> </ul> <p><strong>Others:</strong></p> <ul> <li>Spare parts planning and forecasting.</li> <li>Raise parts requests and ensure timely issuance to the team.</li> <li>Keep track of pending parts and review with the parts team for arrangement.</li> <li>Ensure returns of defective parts to the store within 3 days of repair.</li> <li>Keep track of returns and review weekly with the team.</li> <li>Escalate pending parts older than 7 days to superiors.</li> </ul> <h4>Required skills to be successful:</h4> <ul> <li>Customer-focused approach with quality orientation.</li> <li>Effective communication and coordination skills.</li> <li>Problem-solving and analytical ability.</li> <li>Ability to manage multiple priorities and meet deadlines.</li> </ul> <h4>What equips you for the role:</h4> <ul> <li>Diploma or graduation in mechanical engineering or relevant field.</li> <li>10-15 years of experience in commercial and industrial air-conditioning systems.</li> <li>Strong knowledge of commercial and industrial HVAC systems.</li> <li>Experience in installation, testing, commissioning, operation, maintenance, and troubleshooting of HVAC systems, including chillers, package units, AHUs, FAHUs, DX systems, VRF systems, and associated controls.</li> <li>Proficiency in written and spoken English.</li> <li>Good customer handling skills.</li> <li>Valid Oman driving license.</li> </ul> <h4>About Al-Futtaim Retail</h4> <p>Al-Futtaim Retail has established itself as one of the leaders in retail across the Middle East, Africa, and Asia over the past 30 years. We have developed partnerships with some of the biggest and most respected brands in the world including IKEA, ACE, and Toys R Us in the Middle East, and the Inditex Group of Brands (Zara, Mango, Bershka, and P&B) across Asia. We are also one of the largest global partners of Marks and Spencer’s in both regions with over 75 stores offering both fashion and food options.</p> <p>Most recently, we have been responsible for bringing brands to the Middle East for the first time with the exciting launches of Watsons and B&Q. We aim to continue to be agile and adaptive to our markets with new launches and further development. To achieve this, we recruit the best talent from all backgrounds who will continue to challenge and develop our diverse workforce, which includes over 100 nationalities across 12 countries. Join us today and make a difference.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position Summary We are seeking a skilled HVAC Technician to install, maintain, troubleshoot, and repair heating, ventilation, air conditioning, and refrigeration systems. In this role, you will ensure the efficient operation of HVAC equipment, perform preventive maintenance, and support safe and reliable facility operations. Key Responsibilities Install, inspect, maintain, and repair HVAC systems and equipment. Diagnose and troubleshoot mechanical, electrical, and control system issues. Perform preventive and corrective maintenance on air conditioning and ventilation systems. Monitor system performance and recommend improvements. Read and interpret technical drawings, wiring diagrams, and equipment manuals. Ensure compliance with safety standards and company procedures. Maintain maintenance records and service reports. Respond to emergency breakdowns and service requests.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma or Technical Certification in HVAC, Refrigeration, Mechanical, or Electrical Engineering.</li><li>3+ years of experience in HVAC installation and maintenance.</li><li>Strong knowledge of air conditioning systems, chillers, AHUs, FCUs, ventilation systems, and refrigeration equipment.</li><li>Ability to troubleshoot electrical and mechanical faults.</li><li>Familiarity with HVAC controls and preventive maintenance practices.</li><li>Good communication and problem-solving skills.</li><li>HVAC/Refrigeration certification or trade license.</li><li>Experience in commercial, industrial, or facility management environments.</li><li>Valid UAE Driving License is an advantage.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a skilled and experienced Cold Room Technician to install, maintain, troubleshoot, and repair cold rooms, freezer rooms, refrigeration systems, and related equipment. The ideal candidate should have hands-on experience with commercial and industrial refrigeration systems, ensuring reliable temperature control and efficient operation of cold storage facilities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma / ITI in Refrigeration &amp; Air Conditioning, HVAC, or related field.</li><li>Minimum 3 5 years of experience in cold room and refrigeration system maintenance.</li><li>GCC experience preferred.</li><li>Experience with cold storage facilities, chillers, and freezer systems.</li><li>Ability to troubleshoot electrical and control panel faults.</li><li>Familiarity with preventive maintenance procedures.</li><li>Ability to work independently and under pressure.</li></ul><p></p></section>

<p><h4>Overview of the role</h4> <p>To lead and manage service operations for consumer electronics and air conditioning products by ensuring timely service delivery, high quality standards, effective team performance, and compliance with company processes related to service, spare parts, stock, finance, reporting, and the achievement of revenue and collection targets as assigned from time to time.</p> <h4>What you will do</h4> <p><strong>Description of accountability:</strong></p> <h4>Service operations</h4> <ul> <li>Achievement of revenue and collection target related to assigned portfolio and profit centre.</li> <li>Ensure timely allocation and effective distribution of service calls among team members to maximize productivity and meet service level agreements (SLAs).</li> <li>Coordinate closely with customers, technicians, resellers, dealers, and internal teams to attend and resolve complaints within the prescribed turnaround time.</li> <li>Monitor job progress and proactively update customers and relevant stakeholders on status and expected closure.</li> <li>Ensure proper job closure and timely billing in SAP immediately upon completion of service calls.</li> <li>Maintain clear and professional communication through SAP, emails, and internal coordination.</li> </ul> <h4>Quality & performance management</h4> <ul> <li>Ensure all service jobs are completed with the highest quality standards, aiming for zero repeat complaints.</li> <li>Identify, raise and discuss epidemic or recurring failures with principles and line managers and support root cause analysis.</li> <li>Monitor individual technician performance and motivate team members to improve efficiency, skill levels, and accountability.</li> <li>Guide team members to take on higher responsibilities through coaching, mentoring, and on-the-job support.</li> <li>Recommend and coordinate technical and soft-skill training programs based on performance gaps.</li> <li>Obtain periodic feedback from customers and end users regarding work carried out and ensure corrective actions are implemented where required.</li> </ul> <h4>Spare parts management</h4> <ul> <li>Raise spare parts requests promptly and ensure timely issuance to technicians to avoid service delays.</li> <li>Track pending parts and regularly review status with the parts team for follow-up and availability.</li> <li>Ensure defective parts are returned to the store within three days of repair completion.</li> <li>Maintain weekly review of pending and returned parts with the team.</li> <li>Escalate spare parts pending beyond seven days to superiors for intervention.</li> </ul> <h4>Reporting & documentation</h4> <ul> <li>Review all pending service calls on a regular basis and take corrective action where required.</li> <li>Prepare and submit weekly service and performance reports to the line manager.</li> <li>Conduct weekly performance discussions with team members, share feedback and provide support to improve individual and overall team performance.</li> <li>Ensure accuracy and completeness of job cards, claim data, call reports and supporting documentation.</li> </ul> <h4>Technical report (TR) & warranty management</h4> <ul> <li>Ensure timely submission of TR-recommended job cards within seven days from job completion.</li> <li>Forward documents for scrap processing on a monthly basis.</li> <li>Regularly clear open orders, STOs and pending warranty-related transactions in SAP.</li> <li>Coordinate closely with warranty claims and technical teams to avoid delays or rejections.</li> </ul> <h4>Stock management</h4> <ul> <li>Conduct periodic stock counts to ensure accuracy and system alignment.</li> <li>Ensure proper stock upkeep, segregation and control in line with company policies.</li> <li>Identify and process slow-moving, second sale and scrap stock for timely clearance.</li> <li>Maintain accurate stock records in SAP and address discrepancies immediately.</li> </ul> <h4>Finance & commercial coordination</h4> <ul> <li>Ensure credit approvals are obtained for all non-cash jobs prior to service execution.</li> <li>Ensure timely preparation and submission of service estimates.</li> <li>Follow up on payments and collections from out-of-warranty customers.</li> <li>Escalate overdue payments to management.</li> <li>Coordinate with finance team using SAP reports and email communication to ensure financial compliance.</li> <li>Ensure timely preparation of debit notes for principal claims and follow up with principals for settlement.</li> </ul> <h4>Required skills to be successful</h4> <ul> <li>Strong service operations and team management skills.</li> <li>Customer-focused approach with quality orientation.</li> <li>Good working knowledge of SAP and service management systems.</li> <li>Effective communication and coordination skills.</li> <li>Problem-solving and analytical ability.</li> <li>Ability to manage multiple priorities and meet deadlines.</li> </ul> <h4>What equips you for the role</h4> <ul> <li>Diploma or bachelor’s degree in electronics, electrical or related field.</li> <li>7 to 10 years of experience in after-sales service operations.</li> <li>Minimum 2 to 3 years in a supervisory or team leadership role.</li> <li>Experience in consumer electronics and/or air conditioning service operations.</li> </ul> <h4>About Al-Futtaim Retail</h4> <p>Al-Futtaim Retail has established itself as one of the leaders in retail across the Middle East, Africa and Asia over the past 30 years. We have developed partnerships with some of the biggest and most respected brands in the world including IKEA, ACE and Toys R Us in the Middle East and the Inditex Group of Brands (Zara, Mango, Bershka and P&B) across Asia. We are also one of the largest global partners of Marks and Spencer’s in both regions with over 75 stores offering both fashion and food options.</p> <p>Most recently we have been responsible for bringing brands to the Middle East for the first time with the exciting launches of Watsons and B&Q and we aim to continue to be agile and adaptive to our markets with new launches and further development. For this to be possible we aim to recruit the best talent from all backgrounds who will continue to challenge and develop our diverse workforce which includes over 100 nationalities across 12 countries. Join us today and make a difference.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position Summary We are seeking experienced Cold Room &amp; Refrigeration Technicians to install, maintain, troubleshoot, and repair cold room and refrigeration systems. In this role, you will ensure the efficient operation of refrigeration equipment, maintain temperature-controlled environments, and support preventive and corrective maintenance activities. Key Responsibilities Install, maintain, and repair cold rooms, refrigeration units, and cooling systems. Diagnose and troubleshoot mechanical and electrical faults in refrigeration equipment. Perform preventive maintenance and system inspections. Monitor system performance, refrigerant levels, and temperature controls. Read and interpret technical drawings, wiring diagrams, and equipment manuals. Ensure compliance with safety, environmental, and operational standards. Maintain maintenance records and service reports. Respond to emergency breakdowns and support operational requirements.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><div>Diploma or Technical Certification in Refrigeration, HVAC, Mechanical, or Electrical Engineering . 3+ years of experience in cold room and refrigeration system maintenance. Strong knowledge of refrigeration cycles, compressors, condensers, evaporators, and control systems. Experience handling refrigerants and refrigeration troubleshooting. Ability to read technical drawings and electrical schematics. Good problem-solving and communication skills. Preferred Qualifications HVAC/Refrigeration certification or trade license. Experience in cold storage facilities, food processing plants, warehouses, or commercial refrigeration systems. Valid UAE Driving License is an advantage.</div><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Perform preventive and corrective maintenance of residential buildings, utility systems, and associated facilities.</p></li><li><p>Conduct routine inspections and identify maintenance requirements before failures occur.</p></li><li><p>Carry out minor repairs on electrical, plumbing, HVAC, mechanical, carpentry, and building systems.</p></li><li><p>Maintain lighting systems, distribution boards, switches, sockets, and associated electrical equipment.</p></li><li><p>Repair plumbing fixtures, water supply systems, drainage systems, pumps, and sanitary installations.</p></li><li><p>Assist in maintenance of HVAC systems including split units, VRF systems, FCUs, AHUs, ventilation systems, and associated controls.</p></li><li><p>Perform basic mechanical maintenance on pumps, motors, and rotating equipment.</p></li><li><p>Carry out furniture repairs, minor carpentry works, and maintenance of interior fixtures and fittings.</p></li><li><p>Support maintenance of swimming pools, fountains, irrigation systems, outdoor lighting, gardens, and external facilities.</p></li><li><p>Respond promptly to emergency breakdowns and service requests.</p></li><li><p>Maintain maintenance records, service reports, and inventory of spare parts and consumables.</p></li><li><p>Coordinate with contractors and service providers during maintenance activities.</p></li><li><p>Follow all HSE, security, and access-control procedures within the residence.</p><br></li></ul><p><strong><u>AC TECHNICIAN:</u></strong></p><ul><li><p>TESDA NC III in Refrigeration &amp; Air-Conditioning Servicing (RAC) OR equivalent</p></li><li><p>Minimum 7 years' experience</p></li><li><p>Strong knowledge of Chillers, AHUs, FCUs, CCUs, VRF Systems, Central Plant Equipment</p></li><li><p>Brazing, compressor replacement, HVAC troubleshooting, and PPM experience</p></li><li><p>Experience in building services, facilities management, stadiums, or oil &amp; gas facilities</p></li></ul><br><p><strong><u>ELECTRICIAN:</u></strong></p><ul><li><p>TESDA NC III in Electrical Installation &amp; Maintenance OR equivalent</p></li><li><p>Minimum 7 years' experience</p></li><li><p>Knowledge of MCC Panels, DBs, SMDBs, UPS Systems, Generators, and LV Systems</p></li><li><p>Strong troubleshooting and PPM experience</p></li><li><p>Experience in commercial buildings, stadiums, facilities management, or industrial plants</p></li></ul><br><p><strong><u>ELECTRICAL TECHNICIAN:</u></strong></p><ul><li><p>TESDA NC III in Electronics Products Assembly &amp; Servicing OR equivalent</p></li><li><p>Minimum 7 years' experience</p></li><li><p>Experience with CCTV, BMS, PA Systems, Access Control Systems, Sliding Gates, and ELV Systems</p></li><li><p>Strong troubleshooting skills</p></li></ul><br><p><strong><u>FIRE ALRAM TECHNICIAN:</u></strong></p><ul><li><p>TESDA NC III in Electrical/Electronics Technology or Fire Detection Systems OR equivalent</p></li><li><p>Minimum 7 years' experience</p></li><li><p>Experience in Addressable &amp; Conventional Fire Alarm Systems, FM-200, Deluge Systems, Foam Systems, Fire Fighting Control Panels, Access Control Systems, UPS and DC Systems</p></li><li><p>Strong fault-finding and preventive maintenance experience</p></li></ul><br><p><strong><u>MECHANICAL TECHNICIAN:</u></strong></p><ul><li><p>TESDA NC III in Mechanical Technology, Industrial Mechanics, OR equivalent</p></li><li><p>Minimum 7 years' experience</p></li><li><p>Experience with CHW Pumps, Cooling Tower Gearboxes, Motors, Rotating Equipment, and Pump Alignment</p></li><li><p>Strong troubleshooting and PPM knowledge</p></li></ul><br><p><strong><u>PLUMBER</u></strong></p><ul><li><p>TESDA NC III in Plumbing OR equivalent</p></li><li><p>Minimum 7 years' experience</p></li><li><p>Experience in plumbing systems, sanitary installations, water supply networks, drainage systems, and PPR piping works</p></li><li><p>Strong troubleshooting, reporting, and documentation skills</p><br></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Qualified with TESDA NC Level III or II in any of the following trades: Refrigeration &amp; Air Conditioning, Electrical, Fire Alarm Systems, Mechanical, Plumbing, or an equivalent trade.</p></li><li><p>The Technician must have minimum 7 years of maintenance experience in luxury residences, palaces, embassies, hotels, stadiums, commercial buildings, facilities management, oil &amp; gas, or high-profile properties.</p></li><li><p>Responsible for carrying out preventive and corrective maintenance activities to ensure the safe, efficient, and uninterrupted operation of a property.</p></li><li><p>The role covers electrical, HVAC, plumbing, mechanical, and general building maintenance while maintaining the highest standards of professionalism, confidentiality, and service excellence.</p></li><li><p>Full-time position based at a property, on-call availability for emergency maintenance requirements.</p></li><li><p>Work includes indoor and outdoor environments, may involve lifting, climbing ladders, and physical maintenance tasks</p></li></ul><p></p></section>

<p><h4>Overview of the role</h4> <p>To lead and manage service operations for consumer electronics and air conditioning products by ensuring timely service delivery, high quality standards, effective team performance, and compliance with company processes related to service, spare parts, stock, finance, reporting, and the achievement of revenue and collection targets as assigned from time to time.</p> <h4>What you will do</h4> <p><strong>Description of accountability:</strong></p> <h4>Service operations</h4> <ul> <li>Achievement of revenue and collection target related to assigned portfolio and profit centre.</li> <li>Ensure timely allocation and effective distribution of service calls among team members to maximize productivity and meet service level agreements (SLAs).</li> <li>Coordinate closely with customers, technicians, resellers, dealers, and internal teams to attend and resolve complaints within the prescribed turnaround time.</li> <li>Monitor job progress and proactively update customers and relevant stakeholders on status and expected closure.</li> <li>Ensure proper job closure and timely billing in SAP immediately upon completion of service calls.</li> <li>Maintain clear and professional communication through SAP, emails, and internal coordination.</li> </ul> <h4>Quality & performance management</h4> <ul> <li>Ensure all service jobs are completed with the highest quality standards, aiming for zero repeat complaints.</li> <li>Identify, raise and discuss epidemic or recurring failures with principles and line managers and support root cause analysis.</li> <li>Monitor individual technician performance and motivate team members to improve efficiency, skill levels, and accountability.</li> <li>Guide team members to take on higher responsibilities through coaching, mentoring, and on-the-job support.</li> <li>Recommend and coordinate technical and soft-skill training programs based on performance gaps.</li> <li>Obtain periodic feedback from customers and end users regarding work carried out and ensure corrective actions are implemented where required.</li> </ul> <h4>Spare parts management</h4> <ul> <li>Raise spare parts requests promptly and ensure timely issuance to technicians to avoid service delays.</li> <li>Track pending parts and regularly review status with the parts team for follow-up and availability.</li> <li>Ensure defective parts are returned to the store within three days of repair completion.</li> <li>Maintain weekly review of pending and returned parts with the team.</li> <li>Escalate spare parts pending beyond seven days to superiors for intervention.</li> </ul> <h4>Reporting & documentation</h4> <ul> <li>Review all pending service calls on a regular basis and take corrective action where required.</li> <li>Prepare and submit weekly service and performance reports to the line manager.</li> <li>Conduct weekly performance discussions with team members, share feedback and provide support to improve individual and overall team performance.</li> <li>Ensure accuracy and completeness of job cards, claim data, call reports and supporting documentation.</li> </ul> <h4>Technical report (TR) & warranty management</h4> <ul> <li>Ensure timely submission of TR-recommended job cards within seven days from job completion.</li> <li>Forward documents for scrap processing on a monthly basis.</li> <li>Regularly clear open orders, STOs and pending warranty-related transactions in SAP.</li> <li>Coordinate closely with warranty claims and technical teams to avoid delays or rejections.</li> </ul> <h4>Stock management</h4> <ul> <li>Conduct periodic stock counts to ensure accuracy and system alignment.</li> <li>Ensure proper stock upkeep, segregation and control in line with company policies.</li> <li>Identify and process slow-moving, second sale and scrap stock for timely clearance.</li> <li>Maintain accurate stock records in SAP and address discrepancies immediately.</li> </ul> <h4>Finance & commercial coordination</h4> <ul> <li>Ensure credit approvals are obtained for all non-cash jobs prior to service execution.</li> <li>Ensure timely preparation and submission of service estimates.</li> <li>Follow up on payments and collections from out-of-warranty customers.</li> <li>Escalate overdue payments to management.</li> <li>Coordinate with finance team using SAP reports and email communication to ensure financial compliance.</li> <li>Ensure timely preparation of debit notes for principal claims and follow up with principals for settlement.</li> </ul> <h4>Required skills to be successful</h4> <ul> <li>Strong service operations and team management skills.</li> <li>Customer-focused approach with quality orientation.</li> <li>Good working knowledge of SAP and service management systems.</li> <li>Effective communication and coordination skills.</li> <li>Problem-solving and analytical ability.</li> <li>Ability to manage multiple priorities and meet deadlines.</li> </ul> <h4>What equips you for the role</h4> <ul> <li>Diploma or bachelor’s degree in electronics, electrical or related field.</li> <li>7 to 10 years of experience in after-sales service operations.</li> <li>Minimum 2 to 3 years in a supervisory or team leadership role.</li> <li>Experience in consumer electronics and/or air conditioning service operations.</li> </ul> <h4>About Al-Futtaim Retail</h4> <p>Al-Futtaim Retail has established itself as one of the leaders in retail across the Middle East, Africa and Asia over the past 30 years. We have developed partnerships with some of the biggest and most respected brands in the world including IKEA, ACE and Toys R Us in the Middle East and the Inditex Group of Brands (Zara, Mango, Bershka and P&B) across Asia. We are also one of the largest global partners of Marks and Spencer’s in both regions with over 75 stores offering both fashion and food options.</p> <p>Most recently we have been responsible for bringing brands to the Middle East for the first time with the exciting launches of Watsons and B&Q and we aim to continue to be agile and adaptive to our markets with new launches and further development. For this to be possible we aim to recruit the best talent from all backgrounds who will continue to challenge and develop our diverse workforce which includes over 100 nationalities across 12 countries. Join us today and make a difference.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job title Snr / Technician Analyzers Stream OQ8 Function Maintenance Department Electrical and Instrumentation Section Location Oman Duqm Budget control *OPEX and/or CAPEX and/or Revenue amount as relevant* Reporting to Supervisor Analyzers Direct reports</p><p>Job purpose:</p><p>Perform Instrument service repair at the designed location, under Supervisor Analyzers scope, as the focal point of contact; through (1) Executing routine maintenance, and troubleshooting of Instrument Analyzers in designated areas / Plants (including process, utility, power generation, workshop, offices, laboratory) while observing safety rules and contributing in the achievement of KPIs, as per Department Business Plan, (2) Installing and maintaining the operational integrity of Analyzers equipment and systems, and (3) Calibration, installation and repair of Analyzers, and use of calibration and test equipment, in order to minimize downtime, cost-effective and ensure the reliability, availability of equipment.</p><p>The position will act in accordance with the OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines and standards, supported by an IT Technology platform, HSE standards, Oman s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p><p>Main Responsibilities:</p><p>Scope of Work - Areas</p><p>Heavy Oil Complex Operation (CDU, VDU, SGP, LTU, KTU, DCU, and UGP)</p><p>Hydro Processing Complex (HCU/ARU/SWS/DHT/HPU/PSA)</p><p>Sulfur/Utilities/WWTP Complex Operations (SRU, TGTU, ARU, CRU, SSW, CSW, BFW, Steam Generation, Air, N2, CWT, WWTP)</p><p>Offsite/Logistics Complex (Receiving Terminal, Refinery Tankage, Product Dispatch, Coke and Sulfur Handling, Flare, Buildings)</p><p>Instrument / Analyzer</p><p>Collects data from the field and reports them through proper communication channels.</p><p>Receives assignments or work orders from Instrument/Analyzer Supervisors and coordinates activities with other technicians and operators for solving problems with instrumentation equipment.</p><p>Perform routine maintenance, calibration, and testing of analytical instruments to ensure accurate measurements and compliance with safety and environmental regulations.</p><p>Diagnose and resolve issues with analytical equipment, including performing repairs and modifications as necessary using precision tools, PCs and special tools such as Fieldbus and HART Communicators.</p><p>Install, maintain, repair, and calibrate various types of analyzers sensors and detectors for flow, level, pressure, temperature, GC, TOC, pH/ORP, Conductivity, Oxygen, Moisture, and wide variety of environment and process gas analyzers.</p><p>Strong understanding of electrical, mechanical, and computerized systems related to analytical instruments.</p><p>Ability to troubleshoot complex issues and implement effective solutions.</p><p>Maintain detailed records of maintenance activities, calibration results, and repairs performed on equipment.</p><p>Key interactions</p><p>Internal: All Maintenance Managers &amp; Engineers, Planners, Operations, Procurement, Logistic &amp; HSE</p><p>External: Contractors, Vendors &amp; Suppliers</p><p>Notable Working Conditions. Field Operations and office environment. Moderate to intensive computer screen use. Shift</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma in Electronic &amp; Telecommunication or Instrument or Electrical Engineering</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Diploma Technician 2 years of relevant experience</li><li>Sr. Technician 4 years of relevant experience</li><li>Experience as Analyzer or Instrument Technician</li><li>Knowledge of refinery and petrochemical plant operations.</li><li>Experience in static equipment maintenance, Workshop activities.</li><li>Experience in workshop testing and repair techniques</li><li>Proficiency in M/S Office.</li><li>Communication skills.</li><li>Customer service skills.</li><li>Refining and petrochemical industry.</li><li>Static Oil &amp; Gas equipment (columns, vessels, furnaces etc.).</li><li>Oil and gas piping basic</li><li>Ability to read relevant technical drawings and specifications;</li><li>Hand and power tools</li><li>Measuring and testing devices.</li><li>Result oriented.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job title</strong> Technician, Power Controls &amp; Communication</p><p><strong>Stream</strong> Downstream</p><p><strong>Function</strong> Maintenance</p><p><strong>OQ8</strong></p><p><strong>Location</strong> Duqm</p><p><strong>Budget control</strong> *OPEX and/or CAPEX and/or Revenue amount as relevant*</p><p><strong>Reporting to</strong> Supervisor Electric Power Controls &amp; communication</p><p><strong>Direct reports</strong></p><p><strong>Job purpose</strong></p><p>Perform Electrical Power Controls &amp; communication maintenance at the designed location, under Supervisor Electric Power Controls &amp; communication Services scope, as the focal point of contact; through (1) Executing routine maintenance, and troubleshooting of Electric Power Controls &amp; communication installations in designated areas / Plants (including process, utility, power generation, workshop, offices, laboratory) while observing safety rules and contributing in the achievement of KPIs, as per Department Business Plan, (2) Maintain Electric Power Controls &amp; communication preserving the operational integrity of systems and equipment, and (3) Provide preventive and corrective Electric Power Controls &amp; communication maintenance of electronic equipment, in order to minimize downtime, cost-effective and ensure the reliability, availability of equipment.</p><p>The position will act in accordance with the OQ8 s Mission, Vision, Values &amp; Strategies, as well as, policies, guidelines, and international standards, supported by an IT Technology platform, HSE standards, Oman s government &amp; other legal justification s, and best international practices in consonance with national objectives.</p><p><strong>Main tasks and responsibilities</strong></p><p><strong>SoW - Areas</strong></p><ul><li>Heavy Oil Complex Operation (CDU, VDU, SGP, LTU, KTU, DCU, and UGP)</li><li>Hydro Processing Complex (HCU/ARU/SWS/DHT/HPU/PSA)</li><li>Sulfur/Utilities/WWTP Complex Operations (SRU, TGTU, ARU, CRU, SSW, CSW, BFW, Steam Generation, Air, N2, CWT, WWTP)</li><li>Offsite/Logistics Complex (Receiving Terminal, Refinery Tankage, Product Dispatch, Coke and Sulfur Handling, Flare, Buildings)</li></ul><p><strong>Electric Main Accountabilities</strong></p><ul><li>Receives assignments or work orders from electrical supervisors and coordinates activities with other technicians and operators for solving problems on electrical motors and lighting systems.</li><li>Install and maintain Electrical installations in Refinery units including process, utility, generation, workshop, offices, Laboratory, etc.</li><li>Provide emergency/unscheduled repairs, troubleshooting and performs scheduled preventive maintenance repairs</li><li>Read and interpret equipment manuals and work orders to perform required maintenance and service.</li><li>Diagnose problems, replace or repair parts, test and make adjustments.</li><li>Use a variety of hand and power tools, electric meters</li><li>Testing and certification of portable electrical tools</li><li>Comply with safety regulations and maintain clean and orderly work areas</li><li>Monitoring of Electrical parameters of Electrical Power systems and installations</li><li>Ensures that over-current and under-voltage protection devices, as well as circuit breakers, fuses, etc., are correctly installed.</li><li>Diagnoses, repairs, and tests wiring or circuit faults using tools such as voltmeter, ammeter etc., and referring to wiring diagrams as necessary.</li><li>Checks electrical motors, generators, switchgear etc. and ensures that all connection points and cables are capable of withstanding designated capacity voltages.</li><li>Dismantles and re-assembles electrical equipment and replaces or repairs parts (such as start switches, controls, elements, wiring).</li><li>Tests equipment s insulation, tests coil windings, checks motors for electrical integrity.</li><li>Performs Preventive Maintenance, Corrective Maintenance, and Annual Maintenance (Turnaround) for, 132Kv and 33KV breakers, Power transformers, VFD,battery chargers, Uninterrupted Power Supply (UPS) units, protection relays, Batteries, IPCS, PMS system etc.</li></ul><p><strong>Key interactions</strong></p><ul><li>Internal: Electrical Supervisors, TL, Planners, Operations STL, HSE</li><li>External: Contractors staff</li></ul><p><strong>Notable Working Conditions.</strong> Field Operations and office environment, Moderate screen use. Shift as per business need</p><p><strong>Education requirements</strong> Minimum qualifications for this position is FULL TIME Diploma of Electrical engineering. Certficates from the Private institutes are not acceptable.</p><p><strong>Language requirements</strong> Excellent knowledge of written, read, and spoken English (required)</p><p><strong>Background and experience</strong></p><p><strong>Competencies and skills</strong></p><ul><li>Technician 2 years of relevant experience</li><li>Sr.Technician 4 years of relevant experience</li></ul><p><strong>Both:</strong></p><ul><li>Experience as an Electrical technician in Refinery / Petrochemical plant</li><li>Knowledge of refinery and petrochemical plant electrical power distribution system</li><li>Working experience on the Power transformers , VFD, Emergency Diesel generators. Electrical switchgear of 132KV/33KV level, Electrical protection relays, UPS, Battery chargers, Batteries.</li><li>Workshop electric testing and repair techniques.</li><li>Special tools and test equipment for Electric maintenance.</li><li>Knowledge of working on the electrical protection relays</li><li>Wiring diagrams, Single line diagram, Schematic diagram, Interconnection diagram , SMP, SOP</li></ul><p><strong>Skills</strong></p><ul><li>Proficiency in M/S Office.</li><li>Communication skills.</li></ul><p><strong>Competencies:</strong></p><ul><li>Refining and petrochemical industry.</li><li>Ability to read relevant technical drawings and specifications</li><li>Hand and power tools</li><li>Measuring and testing devices.</li><li>Result oriented.</li><li>Time management.</li><li>Communication.</li><li>Team player.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum qualifications for this position is FULL TIME Diploma of Electrical engineering. Certficates from the Private institutes are not acceptable.</li><li>Excellent knowledge of written, read, and spoken English (required)</li><li>Technician 2 years of relevant experience</li><li>Sr.Technician 4 years of relevant experience</li><li>Experience as an Electrical technician in Refinery / Petrochemical plant</li><li>Knowledge of refinery and petrochemical plant electrical power distribution system</li><li>Working experience on the Power transformers , VFD, Emergency Diesel generators. Electrical switchgear of 132KV/33KV level, Electrical protection relays, UPS, Battery chargers, Batteries.</li><li>Workshop electric testing and repair techniques.</li><li>Special tools and test equipment for Electric maintenance.</li><li>Knowledge of working on the electrical protection relays</li><li>Wiring diagrams, Single line diagram, Schematic diagram, Interconnection diagram , SMP, SOP</li><li>Proficiency in M/S Office.</li><li>Communication skills.</li><li>Refining and petrochemical industry.</li><li>Ability to read relevant technical drawings and specifications</li><li>Hand and power tools</li><li>Measuring and testing devices.</li><li>Result oriented.</li><li>Time management.</li><li>Communication.</li><li>Team player.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for skilled Car Tinting Technicians with expertise in automotive film installation and car care services. The ideal candidate should have hands-on experience in hidden film/tint installation , ensuring high-quality finishing and customer satisfaction.</p><p>Key Responsibilities</p><ul><li>Install car window tint films (sun control / hidden films) with precision</li><li>Perform car care services including cleaning and detailing support</li><li>Ensure bubble-free, smooth, and professional film application</li><li>Handle cutting, shaping, and fitting of tint films</li><li>Maintain tools and materials properly</li><li>Follow safety and quality standards during installation</li><li>Work effectively in a team environment</li></ul><p>Salary: 34,000 42,000 per month</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum 2 years in car tinting / automotive film installation</li><li>Must be skilled in car tinting (hidden film installation)</li><li>Ability to work in a team and deliver quality output</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Require Mechanical Engineer and Gas and Pipe Fitting Technician for Oil and Gas Company in Oman. Gas Technician should know LPG Fitting and Maintenance. Interested candidates Please email your CV on EMAIL_ADDRESS</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Require Mechanical Engineer and Gas and Pipe Fitting Technician for Oil and Gas Company in Oman. Gas Technician should know LPG Fitting and Maintenance.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <p> </p> <p> </p> <div> <strong>POSITION DESCRIPTION:</strong> <strong>Position Title:</strong> Sr. Instrument Technician<br><strong>Reports to:</strong> Instrument Supervisor<br><strong>Department:</strong> Maintenance and Operation Department<br><strong>Location:</strong> Duqm/Ras Markaz<br></div> <p> <strong> </strong> </p> <div> <strong>JOB PURPOSE:</strong> <p>Take job order for maintenance services and overhauls of all Instrumentation &amp; Control equipment and related systems like Compressors, pumps, generators, tanks system and any rotating or static equipment located in the Terminal. In addition, to ensure maintenance activities are carried out as planned within preset time, high quality and as per HSE standards in order to maintain high reliability &amp; availability of Instrument equipment.</p> <p>The position will act in accordance with OTTCO s Mission, Vision, Values &amp; Strategies, as well as, policies,</p> <p>guidelines and international standards, supported by an IT Technology platform, HSE standards, Omani s government &amp; other legal justifications, and best international practices in consonance with national objectives.</p> </div> <p> <strong> </strong> </p> <div> <strong>REPORTING STRUCTURE:</strong> <p> <strong>Number of Staff Supervised</strong> </p> <p> <strong>Direct Reports:</strong> </p> <p> <strong>0</strong> </p> <p> <strong>Total:</strong> </p> <p> <strong>0</strong> </p> </div> <p> <strong> </strong> </p> <div> <strong>KEY RESPONSIBILITIES:</strong> <p> </p> <p> <strong>Responsibilities</strong> </p> <ul> <li>Perform all Instrumentation activities role in Tank Terminal Industry &amp; Duqm Petrochemical Terminal.</li> <li>Prepare and signatory for Permit to Work activities within area of responsibility as licensed and advised by Supervisor and perform operations and maintenance activities in accordance with established company Quality Systems and manufacturers' practices and procedures.</li> <li>Ensure the availability of instrumentation, analyzers, control systems, and communication systems in the area, including the best work practices in maintenance.</li> <li>Install, maintain, repair, overhaul, calibrate, and test various industrial instruments such as control valves, transmitters, DCS, Fire and Gas Systems, ESD systems, and pressure controls.</li> <li>Preform and control all work related to instrument maintenance and calibration and analyze periodic maintenance reports to improve section efficiency.</li> <li>Maintain all instrumentation drawings in as-built condition and ensure any modifications are reflected accurately.</li> <li>Update, maintain detailed records of maintenance, calibration, and repair activities. Document any modifications made to systems and update technical manuals and drawings as necessary.</li> <li>Report any failures of safety-critical elements as per OTTCO standards and oversee the instrumentation side in all assigned locations.</li> <li>Maintain a high level of safety awareness and standards in all daily duties and tasks and guide the subordinate staff on safe working practices.</li> <li>Report daily activity status and work progress to the Instrument Supervisor and assist in planning, coordinating, and controlling instrumentation work activities.</li> <li>Continuously review Instrumentation and Control equipment to identify improvements in operability, reliability, safety, and integrity, and provide written feedback to the Instrument Supervisor.</li> <li>Maintain close communication with the Instrument Supervisor prior to work execution and support them by providing leadership, mentoring, and training to Instrument Technicians.</li> <li>Coordinate and supervise the work of Instrument Technicians and any sub-contractors personnel working on the terminal facilities associated with the Instrument &amp; Control facilities.</li> <li>Promptly respond to callouts for any system or equipment failures, ensuring timely resolution of issues to minimize downtime and maintain operational efficiency.</li> <li>Implement the Preventive Maintenance (PM) plan, manage work backlogs and maintain the maintenance KPI.</li> <li>Ensure that instrumentation maintenance history and reports are updated in SAP (CMMS), maintenance digitalization and critical issues and repetitive failures by implementing Root Cause Analysis (RCA) recommendations.</li> <li>Provide technical support during plant shutdowns</li> <li>Participate in instrumentation-related projects, including upgrades, retrofits, and new installations.</li> <li>Train and mentor junior technicians, providing guidance and support to help them develop their skills and knowledge.</li> <li><br></li> </ul> </div> <p> <strong> </strong> </p> <p> </p> <div> <strong>QUALIFICATIONS, EXPERIENCE, &amp; SKILLS: </strong> <p> </p> <ul> <li>Minimum Qualifications for this position is Diploma in Instrumentation and Control Engineering or equivalent.</li> <li>Excellent knowledge of written, read, and spoken English (required) | Arabic - Native (desirable)</li> <li>5+ years of experience in Instrumentation and Control Maintenance activities preferably at Oil and Gas Industry</li> <li>Background in Instrumentation maintenance best practices.</li> <li>requirements, Oil/Gas process &amp; systems procedures and practices</li> <li>A good knowledge of relevant operations, HSE requirements, Oil/Gas process &amp; systems procedures and practices.</li> <li>Ability to perform as a team player.</li> <li>Self-motivated and dependable, demonstrating strong initiative.</li> <li>Ability to perform as a team player.</li> <li>Ability to deal with change and demonstrate flexibility as required</li> </ul> </div> <p> </p> <p> <strong> </strong> </p></div></section>